Gibt es einen Hahn und Kolb Online Shop?

Take advantage of the combination of rigid 16 mm shank construction, 180 mm overall length for extended reach and direct compatibility with DC-- 11T3 indexable inserts for efficient, repeatable external turning; order the tool via Metav Werkzeuge or contact our consultants for application advice. S16Q SDZCR Boring Bar — 16 mm shank, 180 mm overall length (Teknik Cutting Tools) S16Q SDZCR Boring Bar designed for right-hand external turning applications with DC-- 11T3 indexable inserts Right-hand cutting for external turning 16 mm shank for compact toolholders Compatible with DC-- 11T3 indexable inserts 180 mm overall length for extended reach Precise performance for production turning The S16Q SDZCR is engineered as a compact, rigid boring bar that balances reach and stiffness for consistent turning operations. With a 16 mm shank and an 180 mm overall length, the tool provides access to deeper bores and external features while maintaining stability. The modest 5° cutting angle reduces radial cutting forces, which helps to extend insert life and improve surface finish. For workshops seeking predictable cycle times, this combination supports efficient, repeatable results on typical turning centres. Inventory efficiency and insert compatibility This tool accepts DC-- 11T3 indexable inserts, simplifying tooling management across a production line. Using common insert formats reduces the need for specialised stocks and enables faster changeovers; spare inserts and compatible grades are widely available for varied materials. The 25 mm cutting height ensures correct seating of the insert, thereby maintaining tool geometry and cutting accuracy. The result is a practical compromise between flexibility and low total tooling cost in small-batch and serial production environments. Practical handling and workshop benefits Weighing 0.302 kg, the bar is light enough for easy handling yet solid in service. The nominal 23 mm diameter at the cutting head and the defined shaft geometry support secure clamping in standard toolholders. Right-hand cutting orientation is specified for conventional turning setups. For engineers and technicians, this means straightforward integration into existing tool plans without additional setup complexity, allowing shortened machine downtime and predictable process behaviour. For robust right-hand external turning with proven insert compatibility, contact Metav Werkzeuge for purchasing and technical guidance on the S16Q SDZCR boring bar — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: K192TM Manufacturer: Teknik Makina ISO designation: S16Q SDZCR Facts Shaft diameter: 16 mm Cutting height: 25 mm Overall length: 180 mm Head diameter: 23 mm Weight: 0.302 kg Cutting angle: 5° Cutting direction: right Compatibility & features For indexable inserts: DC-- 11T3 Suitable for right-hand external turning Compact design for standard toolholders FAQ What insert type does this boring bar use? The S16Q SDZCR boring bar is designed for DC-- 11T3 indexable inserts, which are a common format for external turning and provide easy replacement. Is the tool suitable for deep external features? Yes, the 180 mm overall length of the bar gives added reach for deeper external turning and features where standard-length holders may be insufficient. Which cutting direction is supported by the bar? This bar is configured for right-hand cutting, compatible with conventional turning operations on lathes and turning centres. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the stable combination of 23 mm diameter, 69 mm cutting length and a rigid 25 mm shank for consistent deep-hole performance — order the tool directly via Metav Werkzeuge or request bespoke advice from our consultants. U320TM solid drill (Vollbohrer) — 23 mm diameter, 25 mm shank by Teknik Makina The U320TM solid drill is a precision drilling tool designed for heavy-duty metalworking where indexable-insert performance and secure clamping are required 23 mm drill diameter for deep holes 69 mm effective cutting length 25 mm shank for secure clamping Compatible with Taegutec SOMT 08T3 inserts Stable deep-hole performance for shorter cycle times The tool’s 23 mm body and 69 mm cutting length provide a balance between reach and rigidity that reduces chatter and improves dimensional stability in through and blind-hole operations. The combination of a substantial cutting length and a 25 mm shank means less vibration when used in modular drilling holders, which translates into faster spindle speeds and more reliable cycle times. For production environments prioritising throughput, the robust geometry reduces the need for intermediate rework and supports consistent hole quality over longer runs. Cost-controlled machining through insert compatibility By accepting indexable inserts (type SOMT 08T3) from leading suppliers such as Taegutec, the drill minimises downtime associated with regrinding and allows for rapid edge changes on the shop floor. Indexable inserts replace the cutting edge rather than the entire tool, reducing tooling cost per hole and simplifying inventory management. This approach is particularly beneficial for mixed-batch production where insert rotation and grade selection permit optimisation for steel, alloyed materials or castings without changing the basic drill body. Workshop fit, handling and supply-chain confidence With an overall length of 147 mm and a precise 25 mm clamping diameter, the drill integrates cleanly with standard holders and collet systems used across many CNC drilling centres. At a mass of 0.407 kg, the tool offers a well-balanced feel for manual handling and secure clamping in automatic tool changers. Supplied by Teknik Makina and distributed via Metav Werkzeuge, the product is backed by a European supply network designed to keep production lines stocked and reduce administrative complexity for the purchasing department. Contact Metav Werkzeuge for availability and tailored tooling recommendations for Teknik Cutting Tools' U320TM solid drill — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: U320TM Manufacturer: Teknik Makina Type: Vollbohrer Diameter: 23 mm Overall length: 147 mm Cutting length: 69 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.407 kg Compatible inserts: SOMT 08T3 Compatible insert supplier: Taegutec Files: 62de7ec1bd24461b3d5f7a4e, 62de7dd60f56dbb4de4dbedb FAQ What insert type fits this drill? The U320TM solid drill is designed for indexable inserts type SOMT 08T3; inserts from Taegutec are a standard fit for this holder. Which shank diameter is required for clamping? Clamping requires a 25 mm diameter holder or collet to secure the drill correctly and ensure concentricity during machining. Is the U320TM suitable for deep-hole drilling? Yes — the 69 mm cutting length combined with a stable geometry makes the tool suitable for deeper holes within its diameter class. Can different insert grades be used for various materials? The holder accepts SOMT 08T3 inserts in different grades, allowing optimisation for steels, castings or alloyed materials without changing the drill body. What is the overall length and how does it affect setup? The overall length is 147 mm, which fits common tool magazines and requires verification of reach and clearance in machine setup prior to first use. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of a 23 mm cutting diameter, a 25 mm shank and compatibility with SPMG 07T3 inserts delivers stable machining and repeatable hole quality; benefit from reliable chip control and reduced cycle times. Order this drill body directly via Metav Werkzeuge or consult the technical team for application-specific advice. Indexable drill body U923TM — 23 mm diameter, 25 mm shank (Teknik Makina) The indexable drill body U923TM is engineered for CNC drilling operations that demand consistent hole quality and flexible insert sourcing, suitable for medium‑diameter through‑hole work in production and workshop environments 23 mm cutting diameter for medium holes 46 mm effective cutting length 25 mm shank for secure clamping Compatible with SPMG 07T3 and Taegutec/YG‑1 Faster cycles through controlled chip evacuation The body is designed to translate insert geometry into predictable material removal. With a 46 mm cutting length and a 23 mm diameter, the tool supports extended drilling depths while maintaining a constant cutting profile; this yields reduced cycle times and fewer re‑works. Engineers benefit from the improved chip flow that indexable systems provide, turning individual insert changes into quick maintenance steps rather than full tool replacement. The result is measurable productivity gains on repetitive runs. Secure clamping and runout stability for reliable results A 25 mm shank and a substantial shank engagement length of 56 mm ensure stable seating in the machine holder. The robust connection reduces vibration and runout, which in turn extends insert life and preserves bore geometry. For applications where repeatability matters, the drill body’s construction supports consistent concentricity and surface finish; maintenance focuses on replacing indexable inserts rather than the entire cutting tool. Flexible insert sourcing to simplify logistics Compatibility with SPMG 07T3 indexable inserts and recognised manufacturers such as Taegutec and YG‑1 allows parts to be sourced from multiple suppliers. This flexibility lowers inventory risk and keeps production running if one supplier faces delays. Workshops and production planners benefit from the ability to select inserts optimised for specific materials and cutting conditions, while retaining the same drill body for a wide range of tasks. Built for workshop reliability and easy handling With an overall length of 127 mm and a weight of 0.354 kg, the tool balances handling convenience with the mass necessary for stable cutting. The drill body is suited to both single‑machine operations and multi‑station setups where rapid tool changes are required. Its construction focuses on durability and serviceability: worn inserts are replaced quickly, restoring performance without the need for complex reconditioning of the tool body. For application advice or to arrange supply of the U923TM indexable drill body, contact Metav Werkzeuge’s technical advisors at info@metav-werkzeuge.com or call +49 2822 7131930 for direct support from Emmerich and reliable delivery to the workshop. Technical data Article number: U923TM Name: Indexable drill body U923TM Manufacturer: Teknik Makina Diameter: 23 mm Overall length: 127 mm Cutting length: 46 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.354 kg Compatible insert: SPMG 07T3 Compatible insert manufacturers: Taegutec, YG‑1 FAQ Which inserts fit this drill body? The drill body accepts SPMG 07T3 indexable inserts; compatible suppliers listed are Taegutec and YG‑1, allowing straightforward sourcing for replacements. What clamping interface is required? A holder or chuck that accommodates a 25 mm shank with sufficient engagement length is required to achieve the runout stability intended for this drill body. How deep can this tool drill effectively? The effective cutting length is 46 mm, while the overall length of 127 mm allows access and clearance for typical through‑hole operations. Is the tool suitable for production CNC machines? The U923TM drill body has been designed for stable clamping and repeatable performance on CNC equipment; appropriate holder selection and correct insert choice optimise production results. Can inserts from different manufacturers be used interchangeably? Yes — the U923TM is compatible with inserts from multiple manufacturers such as Taegutec and YG‑1, which helps to maintain supply continuity and adjust cutting data to the workpiece material. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a stable 25 mm shank, a precise Ø 23 mm cutting diameter and compatibility with common indexable inserts for consistent hole quality in serial production. Order the tool directly from Metav Werkzeuge or consult their technical team for application-specific advice. Indexable drill body U723TM (Ø 23 mm, 25 mm shank) by Teknik Makina The Indexable drill body U723TM is a 23 mm diameter drill body designed for indexable-insert drilling with SPMG 07T3 inserts, suitable for versatile holemaking in machining centres and tool rooms. Precision Ø 23 mm cutting diameter Solid 25 mm shank for secure clamping Compatible with SPMG 07T3 indexable inserts Cutting length 92 mm for medium-depth holes Consistent hole quality for series production The U723TM drill body is built to give repeatable results in batch machining. Its Ø 23 mm cutting diameter and defined cutting length of 92 mm provide a clear working envelope, which reduces set-up variation and shortens downstream inspection. The construction minimises vibration and maintains tool geometry under load, so each drilled hole meets dimensional expectations with fewer reworks. This stability supports predictable cycle times and improved throughput in mixed-production environments. Broad insert compatibility reduces tooling complexity Designed to accept SPMG 07T3 indexable inserts, the tool body pairs with inserts from Taegutec and YG-1, enabling easy sourcing and flexible tooling strategies. Using proven indexable inserts allows economical index changes instead of full-tool replacement, lowering per-hole cost while keeping cutting performance high. The compatibility also permits quick adaptation to different grades and geometries for optimised chip control and surface finish, which is helpful when switching between ferrous and non-ferrous materials. Secure clamping and compact overall dimensions A 25 mm shank diameter and a 56 mm shank length ensure a firm fit in standard holders and reduce run-out when properly mounted. The compact overall length of 173 mm and a net weight of 0.448 kg make the tool easy to handle during set-up and store in limited-space tool cabinets. Reduced overhang and a stable connection between spindle and tool body help to extend insert life and decrease the risk of chatter, translating into fewer tool changes and better machine utilisation. Practical handling and selection guidance When selecting the drill body for an application, consider the required hole depth relative to the 92 mm cutting length and the available holder clamping capacity for a 25 mm shank. Indexable inserts are recommended for maintenance efficiency: worn edges are rotated or replaced without modifying the tool body. For best performance, match the insert grade and geometry to the workpiece material and cutting conditions to balance tool life and surface quality. Contact Metav Werkzeuge for tailored application advice or to arrange procurement of the Teknik Cutting Tools Indexable drill body U723TM – consultants are available at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: U723TM Name: Indexable drill body (translated) Manufacturer: Teknik Makina Facts Diameter: 23 mm Shank diameter: 25 mm Cutting length: 92 mm Shank length: 56 mm Overall length: 173 mm Weight: 0.448 kg Special features Suitable for SPMG 07T3 indexable inserts Compatible with inserts from Taegutec and YG-1 Designed for indexable-insert drilling applications FAQ What insert type does this drill body use? The drill body accepts SPMG 07T3 indexable inserts; compatible insert suppliers include Taegutec and YG-1. What is the usable cutting length of the tool? The tool provides a cutting length of 92 mm, suitable for medium-depth holemaking within its overall length. Which shank size is required for mounting? A 25 mm shank diameter with a 56 mm engaged shank length is specified for secure clamping. Is this tool suitable for deep-hole drilling? This indexable drill body is optimised for medium-depth holes given its 92 mm cutting length; for significantly deeper applications, a specialised long-drill solution is recommended. How does the tool help reduce operating costs? Using indexable inserts avoids replacing the entire tool body; worn inserts can be rotated or replaced, lowering per-hole tooling costs and minimising downtime. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise Ø 23 mm cutting, proven insert compatibility and a compact 196 mm overall length for reliable holemaking in production and jobbing work. Order the solid drill directly via Metav Werkzeuge or ask our consultants if additional technical data is required. Solid drill – indexable‑insert drilling body, Ø 23 mm, 115 mm cutting length (Teknik Makina) The Solid drill is a robust drilling body designed for medium‑deep holemaking with indexable inserts; suitable for workshop and CNC spindle applications where quick insert changes and consistent hole quality are required Ø 23 mm cutting diameter 115 mm effective cutting length Shank Ø 25 mm, 56 mm shank length Compatible with Korloy WCm-0402 inserts High precision and predictable results for production work The drill body delivers consistent hole quality by combining a defined cutting length of 115 mm with a stable overall length of 196 mm, which reduces runout and positional variance in series production. The geometry and construction provide a repeatable cutting interface when used with the specified Korloy WCm-0402 inserts; this compatibility shortens setup time and lowers per‑hole tooling cost through replaceable cutting edges. Where process reliability matters, such measurable parameters enable predictable cycle times and easier tool life planning. Reduced downtime through quick insert changes and standard shank With a 25 mm shank diameter and a 56 mm shank length the tool fits common holders, enabling rapid interchange in changeover routines. The insert system designation WCm-0402 means replacement cutters are small and economical, allowing maintenance teams to perform fast on‑bench swaps rather than entire tool replacements. The modular approach supports higher machine availability and fewer tool inventory surprises, directly benefiting throughput and operational efficiency on mixed‑batch shop floors. Compact design that supports deeper drilling without compromise The compact 196 mm overall length keeps the tool stiff in extended working conditions while the 115 mm cutting length provides sufficient engagement for many medium‑depth tasks. The balanced combination of length and diameter reduces chatter and improves surface finish compared with longer slender tools. For manufacturers aiming to maintain productive feeds and speeds, this tool body provides a pragmatic compromise between reach and rigidity, delivering cleaner holes and less rework. Practical integration and workshop handling The tool’s weight of 0.504 kg and standard holder interface support straightforward handling and safe tool preparation. Clear specification of the compatible insert type and manufacturer simplifies procurement and spare‑parts management; replacement inserts from Korloy are widely available and stocked by many suppliers, which reduces lead times. Documentation (technical drawings and setup files) accompanies the product record, helping setup personnel to replicate clamping and coolant conditions reliably across machines. Discuss machining requirements with Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com for application advice and order placement; Metav’s consultants will confirm suitability for the intended materials and operations Technical data Article number: U783TM Manufacturer: Teknik Makina Product name: Solid drill (Vollbohrer) File references: 2 attachments available Facts Diameter: 23 mm Overall length: 196 mm Cutting length: 115 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.504 kg Special features Compatible insert type: WCm-0402 Suitable insert manufacturer: Korloy Indexable insert system for economical cutter replacement FAQ What insert type does the drill use? The solid drill accepts WCm-0402 indexable inserts; Korloy is specified as the compatible insert manufacturer for convenient sourcing. Is the tool suitable for CNC spindle holders? Yes, the shank Ø 25 mm and 56 mm shank length make the drill body compatible with standard CNC holders and quick‑change systems. What hole depth can be achieved reliably? The tool’s 115 mm cutting length provides a reliable medium‑depth drilling capacity while maintaining stiffness for accurate holes. How heavy is the tool and does that affect handling? The drill weighs 0.504 kg, allowing safe manual handling during setup and simple tool‑changer operation without excess inertia. Who supplies and supports this tool in Europe? Teknik Cutting Tools produces the drilling body; Metav Werkzeuge supports orders and application queries for European customers under SKU U783TM. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High-performance indexable drilling with reliable compatibility, robust clamping and a compact overall length for stable holemaking. Benefit from a 23 mm cutting diameter, 25 mm shank and compatibility with Korloy WCM-0402 inserts for efficient tool management. Order the indexable-insert drill body directly via Metav Werkzeuge or ask our consultants if needed. Indexable-insert drill body U114TM by Teknik Makina — 23 mm diameter, 25 mm shank Indexable-insert drill body U114TM offers a compact, industrial solution for precision through-hole machining using standard WCM-0402 inserts. 23 mm cutting diameter 25 mm shank diameter Compatible with WCM-0402 inserts Overall length 127 mm Stable clamping for consistent holes The U114TM is engineered as an indexable-insert drill body to deliver process stability when paired with a rigid toolholding system. The 25 mm shank provides secure clamping in collets and holders commonly found on milling and drilling centres, reducing vibration and improving roundness. A consistently supported shank reduces the risk of runout and contributes to predictable tool life, which in turn supports tight production tolerances and repeatable hole quality across batches. Flexible inserts for cost-effective machining Using replaceable WCM-0402 inserts means that the cutting edges can be renewed without replacing the full tool body, lowering tooling costs and downtime. Compatibility with Korloy inserts allows selection of grades and coatings tuned to the workpiece material and cutting conditions, so the same drill body can serve multiple applications. This approach simplifies inventory management and accelerates changeovers while maintaining cutting performance comparable to solid tools in many industrial tasks. Compact geometry that fits the workshop workflow With a total length of 127 mm, a cutting length of 46 mm and a shank length of 56 mm, the drill body offers a compact footprint without sacrificing effective cutting reach. The relatively light mass (approx. 0.37 kg) eases handling at the machine and reduces unnecessary overhang, which helps preserve tool life and maintain consistent chip evacuation. These dimensions make the component suitable for integration into standard machining cycles and automated tool-change systems. Designed for predictable production and easy servicing The indexable design keeps maintenance straightforward: insert replacement is rapid and repeatable, and spare inserts are widely available from Korloy and other manufacturers. The construction of the drill body focuses on robust seating for the inserts and secure clamping of the shank, which together reduce process variation. For operations aiming to balance productivity with predictable lifetime costs, the combination of a durable drill body and exchangeable inserts creates measurable operational advantages. Speak with Metav Werkzeuge for ordering guidance and integration advice on the Teknik Cutting Tools indexable-insert drill body U114TM — local stock and technical consultants in Emmerich are available to support tool selection and deployment. Technical Data Article number: U114TM Manufacturer: Teknik Makina Facts Diameter: 23 mm Shank diameter: 25 mm Cutting length: 46 mm Shank length: 56 mm Overall length: 127 mm Weight: 0.37 kg Special features Compatible with WCM-0402 indexable inserts Insert manufacturer: Korloy Indexable-insert drill body design Suitable for industrial drilling applications FAQ What insert type does the U114TM accept? The U114TM is specified for WCM-0402 indexable inserts; Korloy supplies compatible grades for a range of cutting tasks. Which dimensions are critical for machine setup with this drill body? Key setup dimensions for the U114TM are a 23 mm cutting diameter, 25 mm shank diameter and a total length of 127 mm, which determine holder choice and reach. Is the drill body suitable for automated tool changers? The compact overall length and standard 25 mm shank make the U114TM compatible with many automated tool-change systems, subject to the machine’s clamping interface. How does the indexable design affect running costs? By using replaceable WCM-0402 inserts, the U114TM reduces material expenditure on full-tool replacements and shortens maintenance interruptions, improving cost efficiency over time. What handling considerations apply given the tool’s weight and size? At approximately 0.37 kg, the U114TM is easy to manoeuvre during tool preparation; its compact geometry helps to keep overhang minimal for stable cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precision drilling with robust clamping and long cutting reach — the combination of a 23 mm cutting diameter, 92 mm cutting length and a secure 25 mm shank ensures reliable hole quality and efficient tool changes. Order the indexable drill U614TM directly via Metav Werkzeuge or ask our consultants if needed. Indexable drill U614TM – 23 mm diameter, 92 mm cutting length by Teknik Makina A practical indexable drill designed for industrial metalworking that accepts Korloy WCM-0402 inserts for efficient material removal and straightforward insert replacement Precision 23 mm cutting diameter Effective cutting length 92 mm Shank Ø 25 mm for secure clamping Compatible with Korloy WCM-0402 inserts Consistent hole quality for production environments Achieve repeatable results thanks to the tool's focused geometry and substantial cutting length. The combination of a 23 mm diameter and a 92 mm cutting length delivers stable chip evacuation and controlled heat distribution, which reduces the risk of premature wear. For workshops and production lines requiring uniform hole tolerances, this design supports steady cycle times and minimises rework. The measured weight 0.464 kg contributes to predictable tool dynamics on standard spindles, helping to maintain concentricity over extended runs. Secure connection and fast set-up for industrial spindles A robust shank Ø 25 mm and a 56 mm shank length provide a reliable interface with common toolholders, reducing vibration and improving tool life. The tool's overall length of 173 mm balances reach with stability for deeper holes while maintaining secure clamping. The straightforward mechanical connection means less downtime during tool changes and faster set-up in batch production. Where machine rigidity is available, the drill's geometry supports higher feed rates while keeping hole roundness and surface finish within expected tolerances. Cost-effective tool management through compatible inserts Designed to work with Korloy WCM-0402 inserts, the tool enables fast replacement of cutting edges without removing the body from the machine. This approach reduces tooling inventory costs and improves uptime: worn inserts are exchanged quickly, restoring cutting performance without the need for regrinding. The modular concept also makes it easier to stock a small range of insert grades for different materials, supporting flexible machining of steels and non-ferrous alloys where indexable cutting solutions are preferred. Practical choice for diverse machining tasks The U614TM is suited to workshop and industrial contexts where robust repeatability and efficient tool handling are priorities. Its specification supports common machining tasks that demand clean chip control and repeatable hole geometry. Where conventional solid drills require frequent resharpening, an indexable approach can offer operational advantages through rapid insert changes and predictable cutting behaviour under consistent cutting conditions. For tailored advice on integrating the U614TM into existing toolsets or to discuss insert grades and clamping solutions, contact Metav Werkzeuge — technical support and fast supply from Emmerich are available to ensure a reliable tooling transition. Technical data Article number: U614TM Manufacturer: Teknik Cutting Tools Brand: Teknik Makina SKU: U614TM Key measurements Diameter: 23 mm Overall length: 173 mm Cutting length: 92 mm Shank diameter / holder: 25 mm Shank length: 56 mm Weight: 0.464 kg Materials & compatibility Compatible inserts: Korloy WCM-0402 Typical applications: metalworking / industrial drilling Category: indexable drill Files: related technical files available (see product resources) FAQ What insert type fits this tool? The tool accepts Korloy WCM-0402 inserts as specified for the U614TM, enabling quick cutting-edge replacement. Which clamping diameter is required for secure mounting? A 25 mm shank / holder diameter is specified for stable clamping with the U614TM. What hole depth can be machined effectively? The effective cutting length is 92 mm, which—together with the 173 mm overall length—supports deeper drilling tasks while preserving stability. Is the drill suitable for different materials? The U614TM is intended for general industrial metalworking; select the appropriate Korloy insert grade for steels, non-ferrous alloys and the specific machining requirement. How heavy is the tool and how does that affect use? The tool weight is 0.464 kg, which contributes to consistent tool dynamics and helps maintain concentricity in typical machine spindles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact clamp holder that pairs a 2 mm cutting width with a 35 mm cutting height on a rigid 16 mm shank for accurate parting and grooving. Compatibility with Korloy KGEVR‑KGMN 200 inserts ensures straightforward insert selection and reliable cutting performance. Order directly via Metav Werkzeuge or consult the technical advisors for application-specific guidance. Parting and Grooving Clamp Holder K660TM — 2 mm cutting width, 16 mm shank (Teknik Makina) A robust Parting and Grooving Clamp Holder K660TM engineered for precision parting operations and grooving tasks in compact turning centres, optimised for Korloy KGEVR‑KGMN 200 inserts. Secure clamp for KGEVR-KGMN 200 inserts 2 mm precise cutting width 16 mm shank for compact lathes 125 mm overall length for stability Consistent parting through defined cutting geometry A toolholder designed for repeatable parting and grooving delivers measurable gains in process stability. The 2 mm cutting width combined with a 35 mm cutting height provides a narrow, controlled cut that reduces vibration and chop‑off variation; this results in improved surface finish and fewer secondary operations. For workshops unfamiliar with the terminology: parting/grooving holders secure a replaceable insert at a fixed height and angle so that each cut is consistent cycle after cycle. The controlled geometry of the clamp supports shorter cycle times and predictable tool life. Compact profile improves rigidity and access in tight setups Rigidity is essential for accurate turning; the compact 16 mm shank with ISO designation S16K 2C reduces overhang and increases stiffness in light to medium duty machines. With an overall length of 125 mm and a head diameter of 23 mm, the holder fits constrained toolposts while maintaining clearance for workpiece operations. The low mass of 0.22 kg contributes to reduced tool inertia, helping to prevent chatter during short, decisive cuts. These dimensional characteristics make the holder particularly suitable for small lathes and for setups where tool zonal space and repeatability are priorities. Fast insert handling and broad industrial compatibility Clamping is executed in the KGMN style and is specified to accept Korloy KGEVR‑KGMN 200 inserts, enabling quick insert changes and simple stock management. Compatibility with a widely used insert family helps standardise tooling across machines and reduces the need for diverse spare‑part inventories. For production and maintenance planners, the combination of standardised insert form and robust clamp function supports predictable uptime and lower process variation. The design focusses on pragmatic workshop realities: straightforward assembly, proven geometries and industrial compatibility rather than unnecessary complexity. Contact Metav Werkzeuge today to discuss how the Teknik Makina K660TM parting and grooving clamp holder can be integrated into production workflows — email info@metav-werkzeuge.com or call +49 2822 7131930 for application advice and procurement. Technical data Article number: K660TM Brand: Teknik Makina Tool type: Parting and grooving clamp holder Facts Shank diameter: 16 mm Cutting height: 35 mm Cutting width: 2 mm Overall length: 125 mm Diameter: 23 mm Weight: 0.22 kg Compatibility & features Compatible inserts: KGEVR-KGMN 200 Compatible insert manufacturer: Korloy Shank standard: S16K 2C Clamping designation: KGMN FAQ Which inserts fit this clamp holder? The clamp holder accepts Korloy KGEVR‑KGMN 200 inserts; the KGMN clamping style is specified for secure seating and easy replacement. What is the shank size and standard for mounting? The toolholder uses a 16 mm shank with ISO designation S16K 2C, suitable for toolposts designed for metric shanks. Is the holder suitable for small lathes and limited toolpost space? Yes, the compact 125 mm overall length and 23 mm head diameter make it appropriate for confined setups where rigidity and clearance are required. How does the narrow 2 mm cutting width affect performance? A 2 mm cutting width concentrates cutting forces and reduces chip load per revolution, delivering cleaner parting cuts and less tendency for vibration in most turning applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of stable cutting geometry and proven insert compatibility for consistent T-slot production. The 23 mm cutting diameter, paired with compatibility for SCMT 09T3 indexable inserts and a rigid 20 mm shank, enables reliable repeatability on serial and single-part milling—order directly via Metav Werkzeuge or contact our consultants for specification matching. T-slot cutter TKC194TM – 23 mm diameter, for SCMT 09T3 inserts (Teknik Makina) The T-slot cutter TKC194TM is a production-ready milling tool designed to machine T-slots using SCMT 09T3 indexable inserts, combining secure clamping and service-friendly fastenings for workshop and industrial use. Precision 23 mm cutting diameter Compatible with SCMT 09T3 inserts 20 mm shank for rigid mounting 200 mm overall length for deeper slots Stable slot machining with proven insert technology The main advantage of this tool is its consistent cutting geometry, based on a 23 mm diameter head matched to SCMT 09T3 indexable inserts. This configuration reduces chatter and improves surface finish when creating T-slots or nut channels, because the insert seat and cutter radius are aligned for predictable chip evacuation. For production environments this means fewer reworks and a higher first-pass yield; for maintenance operations it reduces the need for repeated adjustments. The indexing of the inserts keeps downtime minimal and the single-insert layout simplifies inventory. Rigidity and secure fastening for reproducible results A solid 20 mm shank delivers the axial and radial stiffness required for repeatable slot profiles, particularly when using longer overhangs. The cutter uses a T15 Torx fastening system and an M3.5x8.5 screw, which together ensure the insert clamp remains secure under cutting forces and can be serviced quickly with workshop-standard tools. This arrangement supports steady cutting parameters and easier tool set-up on milling heads or modular holders, translating technical stability into tangible production efficiency. Designed for practical handling and straightforward maintenance With an overall length of 200 mm and a cutting length of 30 mm, the tool balances reach with rigidity for many standard T-slot depths. The 55° cutting angle is engineered to shape the slot profile accurately while controlling chip flow. Servicing is straightforward: replace the single insert, retorque the M3.5x8.5 screw with the T15 key and verify runout at the holder. This keeps maintenance cycles short and predictable, supporting uptime without complex procedures. The compact weight and clear mechanical fixings make the tool suitable for both batch production and workshop repairs. Choose the Teknik Makina TKC194TM for dependable T-slot production and consult Metav Werkzeuge for application advice or order placement via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TKC194TM Manufacturer: Teknik Makina Product: T-slot cutter Label: 23 mm T-slot cutter for SCMT 09T3, L 200 mm Specifications Diameter: 23 mm Overall length: 200 mm Shank diameter: 20 mm Cutting length (shank): 30 mm Cutting edges: 1 Cutting angle: 55° Weight: 0.402 kg Torx key: T15 Torx screw: M3.5x8.5 Materials & features Compatible with SCMT 09T3 indexable inserts Single-insert design Rigid 20 mm shank Serviceable with T15 Torx key Designed for T-slot milling FAQ What inserts does the cutter accept? The cutter accepts SCMT 09T3 indexable inserts, chosen for their geometry and suitability for T-slot profiles in this tool family. How is the insert secured in the cutter? The insert is fixed with an M3.5x8.5 screw and tightened using a T15 Torx key to ensure stable clamping during cutting. What shank diameter is required for mounting? The tool features a 20 mm shank; machine holders and collets must accommodate this diameter for proper rigidity. Can the tool reach deeper slots with its overall length? With a 200 mm overall length and 30 mm cutting length, the cutter is suitable for many standard T-slot depths while maintaining stiffness. Is the cutting angle optimised for surface finish? The 55° cutting angle is balanced to produce accurate slot geometry and controlled chip evacuation, improving surface finish consistency. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a modular indexable drilling solution that combines precise 24.5 mm diameter cutting, a standard 25 mm shank for secure clamping, and compatibility with Korloy WCM‑0503 inserts for reduced tooling costs — order the insert drill body directly via Metav Werkzeuge or ask our consultants if needed Teknik Makina U159TM Insert Drill Body – 24.5 mm diameter, 25 mm shank The U159TM insert drill body is an indexable drilling component for metalworking that accepts Korloy WCM‑0503 inserts and is designed for use in standard 25 mm toolholders 24.5 mm cutting diameter 25 mm shank for standard toolholders 72 mm effective cutting length Compatible with Korloy WCM‑0503 inserts Modular indexable design for lower running costs The insert-style construction delivers a modular approach to drilling that separates the cutting edge from the tool body. By using replaceable Korloy WCM‑0503 inserts, the tool reduces the need to replace an entire drill when the cutting edge wears, which lowers ongoing tooling expenditure and shortens machine downtime. The design supports quick insert changes and straightforward stock-keeping of spare parts, making it a practical choice for shops that balance production demands with cost control. Secure clamping and improved rigidity with a 25 mm shank A straight 25 mm shank provides compatibility with a wide range of standard toolholders and clamping systems. The combination of a robust shank and a well-dimensioned tool body contributes to stability during axial loading and helps maintain hole quality across series production. The tool’s mass (approx. 0.453 kg) offers a balanced feel in the spindle, aiding repeatable centring and vibration resistance without excessive inertia for most medium-duty operations. Geometry and reach optimised for medium-depth holes With a cutting diameter of 24.5 mm and an effective cutting length of 72 mm, the configuration is suited to medium-depth blind and through-hole work where consistent edge life and dimensional control are required. The total length of 154 mm allows the body to reach into assemblies while retaining sufficient overhang for effective chip formation. Explaining the terminology: the effective cutting length denotes the maximum continuous depth at which the cutting edges can engage the workpiece without extension or special adaptors. Easy integration into CNC and conventional setups The body is compatible with standard holders and with Korloy indexable inserts, easing integration into both CNC machining centres and manual machines that accept a 25 mm shank. The indexable format supports predictable maintenance intervals and simpler inventory management, while the neutral body geometry permits straightforward programme transfer between machines. For traceability and ordering, the item is listed under the SKU U159TM and is manufactured by Teknik Cutting Tools Contact Metav Werkzeuge today for tailored advice on integrating the Teknik Makina U159TM insert drill body into existing toolsets and to arrange supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U159TM Manufacturer: Teknik Makina Facts Cutting diameter: 24.5 mm Shank diameter: 25 mm Effective cutting length: 72 mm Shank length: 56 mm Overall length: 154 mm Weight: 0.453 kg Special features Compatible inserts: WCM‑0503 Compatible insert manufacturer: Korloy Tool type: Indexable insert drill body FAQ Which inserts fit this tool? The drill body accepts Korloy WCM‑0503 indexable inserts; these inserts are specified for use with the Teknik Makina U159TM insert drill body What shank size is required? A 25 mm straight shank holder is required; the tool is designed for standard 25 mm toolholders and clamping systems How deep can this tool drill? The effective cutting length is 72 mm, while the total length is 154 mm, which indicates the practical reach for medium-depth operations Is the tool suitable for CNC machining? Yes, the indexable format and 25 mm shank make it suitable for integration into CNC machining centres as well as conventional machines How does the indexable design reduce costs? By replacing only the worn WCM‑0503 inserts rather than the entire body, the approach lowers ongoing tooling expenditure and simplifies spare-part management Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of proven insert compatibility, stable shank engagement and a long cutting length for reliable holemaking in demanding setups; order the solid drill through Metav Werkzeuge or consult our specialists for application advice. Solid drill U824-1TM – Indexable-insert drill, 24.5 mm diameter, Teknik Makina A Solid drill U824-1TM intended for indexable-insert drilling with SPMG 07T3 inserts, suited to production and maintenance environments where repeatable stability and straightforward insert replacement are priorities. 25 mm shank for high rigidity 72 mm cutting length for deeper holes Accepts SPMG 07T3 indexable inserts Overall length 154 mm for versatile toolholders Stable drilling through increased shank rigidity The combination of a 25 mm shank and a 24.5 mm diameter provides enhanced stiffness at the tool holder interface, which reduces deflection during axial cutting operations. This structural stability translates into more consistent hole geometry and fewer re-machining steps, a clear rational advantage for production workflows where tolerance retention is essential. The result is predictable performance cycle after cycle without relying on additional tool compensations. Longer cutting reach for economical machining cycles With a 72 mm cutting length and an overall length 154 mm, this solid drill enables deeper effective penetration without frequent tool changes. The extended cutting reach reduces setup time and the number of tool swaps in multi-stage processes, supporting a more efficient spindle utilisation. The 56 mm shank engagement ensures sufficient clamping length in standard holders, maintaining concentricity and contributing to longer insert life under stable cutting conditions. Broad insert compatibility and easy maintenance Designed for the industry-standard SPMG 07T3 insert, the tool is compatible with inserts from Taegutec and YG-1, simplifying procurement and inventory management. The modest mass of 0.452 kg facilitates handling during tool changes and reduces operator fatigue in manual setups. Where fast replacement and reliable repeatability matter, this indexable-insert approach offers a cost-effective route to maintain throughput without complex regrinding or single-use tooling. For straightforward specification support or to purchase the Teknik Makina U824-1TM through Metav Werkzeuge, please contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored advice and stock information Technical data Article number: U824-1TM Manufacturer: Teknik Makina Product type: Solid drill (indexable-insert) Facts Diameter: 24.5 mm Overall length: 154 mm Cutting length: 72 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.452 kg Special features Insert type: SPMG 07T3 Compatible insert manufacturers: Taegutec, YG-1 Indexable-insert system for fast replacement FAQ What insert does the drill take? The drill uses the SPMG 07T3 indexable insert, which is widely available and compatible with the U824-1TM. Which manufacturers' inserts are compatible? Inserts from Taegutec and YG-1 are compatible with this solid drill and its SPMG 07T3 pocket. What are the key dimensions to check for holder selection? Check the 24.5 mm diameter, 25 mm shank and the overall length of 154 mm to ensure the holder provides sufficient engagement for the U824-1TM. How deep can this drill cut effectively? The tool offers a 72 mm cutting length, allowing deeper holemaking without frequent tooling changes. Is the drill easy to handle during tool changes? Yes; the U824-1TM has a weight of 0.452 kg, making it straightforward to handle for routine insert replacements and mounting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine solid‑carbide durability, internal coolant and precise indexable‑insert compatibility to achieve consistent, high‑quality internal threads in production and toolroom environments. Order the KE78TM thread boring bar directly via Metav Werkzeuge or ask our consultants for application guidance. KE78TM Thread Boring Bar — Solid‑carbide tool with internal coolant (Teknik Makina) The KE78TM thread boring bar is a purpose‑built tool for producing internal threads with indexable inserts; it suits CNC turning centres and dedicated threading stations where rigidity and coolant delivery are required. Solid carbide construction Internal coolant feed Compatible with 22 IR inserts Right‑hand cutting, ISO E20S Precision that keeps production running The monoblock solid carbide construction delivers high stiffness and dimensional stability under load, reducing chatter and prolonging tool life compared with less rigid designs. Built to accept the 22 IR indexable system, the bar transfers cutting forces cleanly through the holder and into the machine spindle, which translates into repeatable thread form accuracy and fewer rework cycles. The ISO designation E20S indicates a standardised interface for secure location and predictable performance in automated setups. Consistent coolant control for better chip evacuation An integrated internal coolant channel provides directed fluid delivery straight to the cutting zone, aiding chip control and temperature management during the threading operation. This targeted cooling reduces built‑up edge and thermal distortion, improving surface finish and thread consistency across long production runs. For operations where cycle time and first‑pass yield matter, the combination of internal coolant and carbide rigidity supports higher metal removal stability and reduced cycle‑to‑cycle variance. Secure clamping and serviceable components The bar is prepared for the IR22 clamping system and secures inserts with the supplied Torx fastenings (Torx T15 screws and M4x11 fixing screws), ensuring reliable insert retention under intermittent thread depths and interrupted cuts. The E20S shank form and 20 mm shank diameter provide compatibility with common toolholders while the 15.6 mm cutting height affords proper insert engagement for standard internal thread profiles. These mechanical details simplify setup and replacement procedures, limiting downtime between tool changes. Designed for industrial threading tasks With an overall length of 250 mm and a body diameter of 24.5 mm, the bar is engineered for balance between access into bores and the stiffness required for accurate internal profiling. Right‑hand cutting geometry suits standard turning and threading directions prevalent in most machine tool operations. The KE78TM is therefore appropriate for series production and maintenance tasks where a robust, repeatable threading solution is required, and where the economy of indexable inserts brings measurable savings over time. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina KE78TM thread boring bar — Metav’s specialists in Emmerich can confirm compatibility with existing holders and machining parameters; eMail info@metav-werkzeuge.com, Tel +49 2822 7131930 Technical data Article number: KE78TM Manufacturer: Teknik Makina Product: Thread boring bar for inside thread Diameter: 24.5 mm Total length: 250 mm Shank diameter: 20 mm Cutting height: 15.6 mm Weight: 0.57 kg Cutting direction: Right Material: Solid carbide Indexable insert system: 22 IR Clamping holder designation: IR22 ISO designation: E20S Internal coolant: Yes Torx screw: T15 and M4x11 FAQ Which machines is this bar suited for? The KE78TM thread boring bar from Teknik Makina is intended for use on CNC turning centres and compatible threading stations where an E20S shank and IR22 clamping system can be accommodated. Which insert type is required for operation? This bar accepts 22 IR indexable inserts; secure the inserts with the specified Torx fasteners (T15 and M4x11) to maintain correct seating and cutting geometry. Is coolant delivery supported and why does it matter? Yes — the KE78TM features internal coolant to direct fluid to the cutting edge, improving chip evacuation, heat control and surface finish during internal threading. What are the main benefits of the solid‑carbide body? The solid‑carbide construction increases rigidity and wear resistance, helping to preserve thread form accuracy and extend service intervals compared with less rigid tool bodies. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of high-precision finishing and a robust Ø 240–300 mm working range for consistent bore quality. The tool’s 40 mm holder and 0.01 mm fine-machining capability deliver repeatable results in production; order directly via Metav Werkzeuge or consult our specialists for application guidance. Ausdrehwerkzeug THB102TM — Internal boring tool for finishing with CCMT 09T3 inserts, Ø 240–300 mm Ausdrehwerkzeug THB102TM is an internal boring tool designed for accurate finishing operations with CCMT 09T3 indexable inserts in medium-to-large bore applications. Finishing accuracy 0.01 mm Compatible with CCMT 09T3 inserts Ø 240–300 mm working range Holder diameter 40 mm Precise finishing that stabilises process capability This boring tool is engineered for consistent surface quality in finishing passes. With a fine-machining tolerance of 0.01 mm, the design reduces rework and minimises downstream inspection effort. The tool geometry and clamping arrangement support stable chip control when fitted with CCMT 09T3 indexable inserts, which helps to maintain repeatable roundness and surface finish across batches. For production environments, this translates into shorter cycle variation and improved first-pass yield. Robust construction for secure set-up and vibration damping A 40 mm toolholder diameter provides a rigid connection to the machine spindle, lowering the risk of chatter in larger bores. The tool’s mass (approximately 7 kg) and overall length of 163.7 mm combine to give a balanced assembly for stable cutting dynamics. The sturdy build supports predictable tool life for the inserts and reduces the need for frequent re-adjustments, which is especially valuable when processing longer runs or when high reproducibility is required. Simple assembly and reproducible clamping Fitting and securing the cutting insert is straightforward: the clamping screw is specified as M3.5x9 and the required Torx key size is T15, ensuring a consistent torque setting during assembly. Clear mechanical specifications make tool changes faster and reduce the chance of incorrect mounting. The design focuses on practical workshop handling so that set-up times are minimised while maintaining secure insert retention, helping to keep machining throughput high. Applications and material considerations for finishing operations This tool is primarily intended for finishing internal bores within the Ø 240–300 mm range using CCMT 09T3 inserts. It is suited to standard turning centres and boring mills where fine surface tolerance and concentricity are important. Typical uses include final sizing of castings, turned components and rework tasks that demand a controlled surface texture. When paired with appropriate inserts and cutting parameters, the assembly supports a wide range of finishing operations without compromising form accuracy. For precision finishing tasks with the THB102TM from Teknik Makina, contact Metav Werkzeuge for tailored application advice and procurement assistance. Technical data Article number: THB102TM Manufacturer: Teknik Makina Facts Working diameter: Ø 240–300 mm Overall length: 163.7 mm Holder diameter: 40 mm Fine machining tolerance: 0.01 mm Weight: 7 kg Special features Compatible with CCMT 09T3 indexable inserts Torx key: T15 Torx screw: M3.5x9 For finishing/internal boring applications FAQ What insert type is required for this boring tool? The boring tool is designed for CCMT 09T3 indexable inserts; these inserts provide the geometry and clearance necessary for the THB102TM to achieve its specified finishing performance. What is the achievable tolerance when finishing with this tool? When correctly set up, the tool achieves a fine-machining tolerance of 0.01 mm, assuming appropriate machine rigidity and cutting parameters. Which machines are suitable for mounting the boring tool? The THB102TM is compatible with lathes or boring mills that accept a 40 mm holder interface and can accommodate the tool’s overall length of 163.7 mm. How is the insert secured and what torque tool is required? Insert clamping uses an M3.5x9 screw tightened with a T15 Torx key to ensure consistent and secure retention. Is this tool intended for roughing operations? This tool is optimised for finishing; although it may be used for light stock removal, its principal strength lies in delivering precise surface quality and dimensional accuracy during finishing passes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a high-stability boring solution that combines precise insert compatibility and a robust 40 mm shank to keep cycle times predictable and setups secure — order or request tailored advice via Metav Werkzeuge. TKB152TM Boring Tool — for CCMT 1204 indexable inserts, Ø 240–350 mm, 40 mm shank (Teknik Makina) A reliable TKB152TM boring tool engineered for heavy-duty machining where repeatable geometry and secure clamping are essential for medium-to-large diameter boring tasks. 40 mm shank diameter for stable clamping Compatible with CCMT 1204 indexable inserts Cutting diameter range 240–350 mm Sturdy 154 mm overall length, 8.294 kg mass Stable clamping for consistent bore quality The design focuses on repeatability: the 40 mm shank and robust body mass deliver reduced vibration and improved surface finish when boring in demanding applications. Stability directly affects tool life and part quality, so the heavier construction and firm shank connection help maintain concentricity over longer runs. For workshops seeking predictable tolerances, this reduces scrap rates and minimises rework, while the CCMT 1204 insert compatibility simplifies tooling logistics by using a widely available insert format. Fewer setups, clearer process control With a cutting diameter range of 240–350 mm and an overall length of 154 mm, the tool is intended to cover a broad set of machining conditions without frequent tool changes. The modular insert interface enables quick insert replacement using the supplied fasteners (Torx screw M5x12) and standard key (T20), which shortens downtime and helps maintain process efficiency. Explaining the reason: indexable inserts separate cutting geometry from the toolholder, so the holder remains unchanged while inserts are swapped to restore cutting performance — a cost-efficient strategy for production environments. Compatibility that streamlines workshop inventory Supporting CCMT 1204 indexable inserts means compatibility with many grades and coatings offered across suppliers, making it easier to choose coated or uncoated grades for specific materials. The tool’s specification is deliberately simple: a defined shank diameter, clear diameter range and standardised fixing method; this lowers procurement complexity and helps buyers consolidate items. That practical clarity benefits procurement managers and shopfloor planners aiming for fewer SKUs and better stock rotation. Practical assembly and maintenance advantages Assembly and clamping use common torque interfaces and a Torx head screw, which reduces the need for specialised tools. Routine maintenance is limited to insert changes and periodic inspection of the Torx fastener seating, so machine downtime is minimised. The combination of a substantial tool mass (8.294 kg) and standardised insert fixing enhances resistance to chatter when cutting tougher sections, translating into longer insert life and fewer interrupted cycles. Contact Metav Werkzeuge for tailored technical advice, availability checks and compatible insert recommendations for the Teknik Makina TKB152TM boring tool Technical Data Article number: TKB152TM Manufacturer: Teknik Makina Eclass: 21181208 For inserts: CCMT 1204 Shank diameter: 40 mm Overall length: 154 mm Diameter range: 240–350 mm Weight: 8.294 kg Torx key: T20 Torx screw: M5x12 Data Shank diameter: 40 mm Overall length: 154 mm Diameter range: 240–350 mm Weight: 8.294 kg Special features Compatible with CCMT 1204 indexable inserts Torx M5x12 fixing Torx key T20 required SKU: TKB152TM Eclass 21181208 FAQ What insert type does this tool accept? The tool accepts CCMT 1204 indexable inserts; Teknik Makina designed the TKB152TM specifically for that insert format to ensure correct seat geometry and secure fixing. What shank diameter is required for the toolholder? The boring tool uses a 40 mm shank diameter, which provides the clamping stability needed for bore diameters from 240–350 mm. How long is the tool overall and what does that mean for setup? Overall length is 154 mm, a compact but rigid length that simplifies fixturing and reduces overhang to help maintain concentricity during machining. Which fasteners and keys are needed for insert changes? Insert clamping uses an M5x12 Torx screw, tightened with a T20 Torx key; this standardised approach reduces the need for specialist tooling. Is the tool suitable for high-speed cutting? The tool is intended for stable, medium-to-heavy boring applications where insert selection determines cutting speed; choose insert grades and coatings suited to the material and desired surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine robust rigidity, large-diameter capability and established insert compatibility to achieve consistent finishing results; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Fine Boring Tool for CCMT 09T3 Indexable Inserts — 240 mm nominal diameter, 40 mm shank — Teknik Makina The Fine Boring Tool for CCMT 09T3 Indexable Inserts is a purpose-built finishing tool intended for precision boring and internal profiling with indexable carbide inserts. 240 mm nominal cutting diameter Compatible with CCMT 09T3 indexable inserts 40 mm shank diameter for rigid mounting 93.7 mm cutting height for extended reach Achieve consistent finishing with large-diameter stability The tool is designed for precision finishing operations where repeatable bore quality matters. With a 240 mm nominal cutting diameter and a geometry optimised for fine stock removal, the head delivers stable cutting conditions that reduce vibration and surface waviness. The 40 mm shank provides a secure interface with standard toolholders, improving run-out control; this results in a measurable improvement in roundness and surface finish compared with less rigid solutions. For machinists looking to maintain tight tolerances, the combination of diameter and shank rigidity translates directly into fewer rework cycles and higher first-pass yield. Secure clamping and extended reach for versatile machining The assembly’s 93.7 mm cutting height gives extended reach into deeper bores without compromising stiffness. Extended reach components can often introduce deflection; this tool mitigates that through a robust profile and correct centre of mass, helping to maintain cutting geometry under load. In practice, this means operators can perform finishing passes in one set-up where previously multiple tools were required. The result is reduced handling time, fewer tool changes and improved throughput on medium to large boreings. Indexable-carbide compatibility that reduces tooling costs Compatibility with CCMT 09T3 indexable inserts means the tool accepts a widely used, readily available carbide grade and geometry. Indexable inserts allow for rapid edge changes and the selection of grades optimised for steel, cast iron or non-ferrous materials. Because the insert pocket and seat conform to established standards, workshop inventory is simplified and tooling downtime is minimised. The pragmatic economics of indexable tooling—lower per-edge cost and straightforward regrinding policies for holders—support sustained production runs and predictable operating budgets. Practical applications and operational advantages Engineered for finishing operations in general engineering and toolroom environments, the boring head is suitable for internal machining tasks where surface integrity and dimensional consistency are priorities. Typical applications include bearing seats, precision housings and stepped bores. The design supports proven machining strategies such as light depth-of-cut finishing passes at controlled feeds to deliver the desired Ra values while preserving insert life. For procurement and process engineers, the combination of Teknik Makina build quality and straightforward insert replacement provides a reliable element in production tooling assortments. Discuss specific application requirements with Metav Werkzeuge for tailored machining recommendations or to request a detailed quotation for the Teknik Makina THB112TM — contact our Emmerich team at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: THB112TM Manufacturer: Teknik Makina Product: Fine boring tool for finishing Label: 240mm Ausdrehwerkzeug für die Feinbearbeitung CCMT 09T3 Core technical data Diameter: 240 mm Shank diameter: 40 mm Max cutting diameter: 300 mm Cutting height: 93.7 mm ECLASS: 21041590 Special features Compatible with CCMT 09T3 indexable inserts Designed for precision finishing SKU: THB112TM FAQ Which inserts fit this fine boring tool? The tool accepts CCMT 09T3 indexable inserts; Tek nika Makina’s THB112TM is furnished for this standard insert geometry. What bore range can be finished with this tool? The head is specified for a 240 mm nominal cutting diameter, with an indicated maximum cutting diameter of 300 mm, suitable for medium-to-large internal finishing. How does the 40 mm shank affect machining performance? A 40 mm shank provides a stiffer connection to the toolholder, reducing run‑out and deflection for improved surface finish and dimensional control when using the THB112TM. Is the tool suitable for deep bores? The 93.7 mm cutting height offers extended reach for deeper internal features; use conservative feeds and finishing passes to maintain insert life and bore quality. Can the tool be used for different materials? Compatibility with CCMT inserts allows selection of carbide grades tailored to steels, cast iron or non‑ferrous materials, enabling the head to be adapted to common finishing tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of large cutting capacity, simple insert compatibility and robust build for reliable bore production. Order the tool directly via Metav Werkzeuge or contact our consultants for specification matching. Boring tool for CCMT 1204 indexable inserts — 240 mm diameter, 208 mm overall length — Teknik Makina A robust boring tool for CCMT 1204 indexable inserts, designed for medium-to-large bore machining in conventional and CNC turning centres. Ø240 mm tool body for large bores Compatible with CCMT 1204 indexable inserts Overall length 208 mm for stable setup Consistent bore geometry and production repeatability The design provides a solid platform for producing uniform bores: a 240 mm tool body paired with a maximum cutting diameter of 350 mm ensures the machine load is distributed over a large contact area, improving rigidity and reducing vibration during machining. This results in better surface finish and dimensional repeatability across production runs. For operations where bore tolerance and surface integrity are critical, the combination of a wide tool body and controlled overhang reduces the need for repeated rework and supports stable cycle times. Fast insert handling and economic tool life Compatibility with CCMT 1204 indexable inserts simplifies service routines: inserts are widely available and can be indexed or replaced rapidly when wear occurs. The use of indexable inserts minimises downtime compared with solid-tool resharpening and permits cost-effective maintenance strategies for batch and continuous production. Clear insert seating and standard insert geometry mean replacement intervals are predictable, supporting inventory planning and minimising unplanned stoppages. Stable set-up and wide machine compatibility With an overall length of 208 mm, the tool is optimised to balance accessibility and stiffness for a variety of machines. The shorter overhang compared with longer heads improves dynamic behaviour in both manual lathes and CNC turning centres, aiding repeatable set-up and reducing the risk of chatter in deep or interrupted cuts. Manufactured by Teknik Makina, the component is intended for integration into standard tooling systems and is suitable where a sturdy, indexable cutter is required for internal or external bore work. Contact Metav Werkzeuge for a tailored technical consultation on the Teknik Makina boring tool TKB161TM and to confirm stock and delivery from our Emmerich warehouse — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: TKB161TM Product type: Boring tool Designation: Boring tool for CCMT 1204 indexable inserts Core dimensions Diameter: 240 mm Overall length: 208 mm Max cutting diameter: 350 mm eClass: 21181208 Compatibility & features Compatible with CCMT 1204 indexable inserts Label: 240mm Ausbohrwerkzeug CCMT 1204 L208mm Brand: Teknik Makina FAQ Which inserts fit this tool? The tool accepts CCMT 1204 indexable inserts; this standard geometry is compatible with the boring tool and allows straightforward indexing or replacement. What is the maximum cutting diameter that can be machined? The maximum cutting diameter is 350 mm when the boring tool is set up according to machine and process parameters. Is the tool suitable for CNC turning centres? Yes — the boring tool from Teknik Makina is intended for use in conventional and CNC turning centres where stable set-up and reduced overhang are required. How does insert replacement affect production? Using CCMT 1204 indexable inserts enables quick replacement or indexing, reducing downtime and keeping cycle times predictable. Which product code should be referenced when ordering? Reference SKU TKB161TM for this boring tool when enquiring or ordering via Metav Werkzeuge Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from the combination of precise 95° cutting geometry and integrated internal coolant for consistent metal removal and extended tool life. Compatibility with CNMG 1204 indexable inserts plus a robust Ø20 mm shank delivers secure clamping and dimensional stability in production environments. Order the boring bar directly via Metav Werkzeuge or consult our specialists if required. A20R PCLNR boring bar — PCLN for CNMG indexable inserts, internal coolant (Teknik Makina) The A20R PCLNR boring bar is a right‑hand tool engineered for finishing and bore‑facing operations, featuring internal coolant and an ISO A20R PCLNR designation for CNMG‑type indexable inserts. 95° cutting angle for stable cutting Internal coolant for improved tool life Compatible with CNMG 1204 inserts Shank Ø20 mm, overall length 200 mm Precise geometry for dependable chip control and surface finish The 95° cutting angle and PCLN geometry combine to provide a stable cutting action that reduces vibration and promotes predictable chip formation. For practical use this means fewer interrupted cuts and a more consistent surface finish when machining bores or facing close tolerances. The tool accepts CNMG 1204 indexable inserts, a common industry standard; these inserts allow the machining parameters to be adapted by selecting the appropriate grade and geometry for the workpiece material. By pairing a proven insert form with the bar’s right‑hand configuration, the assembly is optimised for finishing passes where dimensional accuracy and repeatability are priorities. Internal coolant for thermal control and longer tool life An integral coolant channel delivers lubricant and coolant directly to the cutting zone, which helps to evacuate heat and improve chip flow. This internal coolant arrangement reduces thermal distortion of the tool and workpiece, supporting longer tool life and a more consistent bore diameter over extended runs. In production scenarios where cycle time and part quality matter, targeted coolant supply reduces the need for frequent tool inspection and tempering of cutting data. The result is a lower total cost of operation through fewer tool changes and improved process stability. Robust design for secure clamping and easy integration With a Ø20 mm shank and an overall length of 200 mm, the bar offers a balance between rigidity and reach for typical centre‑lathe and CNC turret set‑ups. The ISO designation A20R PCLNR identifies the toolholder form, simplifying tool‑room inventory and ensuring compatibility with standard clamping systems. A modest mass (approx. 0.52 kg) supports rapid accelerations without compromising stability. In practice, this means reliable performance in mixed‑batch work and easier handling during tool changes; the combination of solid geometry and internal coolant makes the tool suitable for high‑precision finishing operations where consistent results are required. Contact Metav Werkzeuge for tailored technical advice and assured supply from Emmerich — quote SKU AP338TM when enquiring for faster processing Technical Data Article number: AP338TM Manufacturer: Teknik Makina ISO designation: A20R PCLNR Type: PCLN for CNMG indexable inserts Special feature: with Coolant Facts Shank diameter: 20 mm Diameter: 24 mm Overall length: 200 mm Cutting height: 50 mm Cutting angle: 95° Weight: 0.52 kg Cutting direction: right Special features Internal coolant supply Compatible with CNMG 1204 inserts ISO form: A20R PCLNR Suitable for finishing and bore operations FAQ Which insert type fits this boring bar? The boring bar is designed for CNMG 1204 indexable inserts; the PCLN geometry is matched to that insert form for stable seating and secure clamping. Does the bar provide coolant directly to the cutting edge? Yes — the tool features internal coolant that delivers fluid to the cutting zone, supporting thermal control and improved chip evacuation. What are the shank and overall dimensions? Shank Ø is 20 mm with an overall length of 200 mm, providing a balance of rigidity and reach for typical lathe and turret installations. Is this tool suitable for heavy roughing or finishing? The design and 95° cutting angle are optimised for finishing and bore‑facing operations; for heavy roughing a more rigid, larger‑section holder may be preferable. How is the tool identified in ISO form? The bar carries the ISO designation A20R PCLNR, which helps with tool selection and ensuring compatibility with standard clamping systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a combination of robust shank stability, integrated internal coolant and compatibility with CNMG 1204 indexable inserts for consistent turning performance; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. A20R PCLNL Boring Bar (PCLN for CNMG indexable inserts) by Teknik Makina — left‑hand, internal coolant The A20R PCLNL boring bar is a purpose-built external turning holder compatible with CNMG 1204 indexable inserts, offering a left‑hand cut orientation and integrated internal coolant to support reliable chip evacuation and extended tool life. Compatible with CNMG 1204 indexable inserts Internal coolant for improved chip control Left‑hand cutting orientation for reverse cuts 20 mm shank, 200 mm overall length Consistent rigidity and predictable machining results The A20R PCLNL boring bar is engineered to combine a compact 20 mm shank with a 200 mm overall length, delivering a balance between accessibility and stability for medium‑reach turning tasks. The cylindrical shank and the holder geometry contribute to reduced vibration and improved surface finish, which translates into fewer re‑works and higher first‑pass yields. For workshop managers seeking measurable productivity gains, the holder’s construction supports reproducible set‑ups and steady cutting conditions across batches. Better cooling and chip management for longer cutting windows Equipped with internal coolant, the tool channels cutting fluid directly to the insert seating area to manage temperatures and assist chip evacuation during continuous operations. This targeted coolant supply reduces thermal load on both insert and workpiece, which helps maintain dimensional accuracy and extends insert life. In practice, internal coolant reduces the frequency of tool changes and supports uninterrupted production runs when paired with appropriate CNMG inserts. Straightforward compatibility with standard indexable inserts Designed specifically for the PCLN pocket form, the holder accepts CNMG 1204 indexable inserts, enabling quick insert changes and broad grade selection for different materials. The PCLN style secures the insert at an angle that supports predictable cutting geometry and repeatable results. For procurement teams, this compatibility simplifies stock management: a single holder design works with widely available CNMG inserts from multiple suppliers. Suited to industrial workflows and mixed‑material applications With a 95° cutting angle, the holder is optimised for robust metal engagement and can be integrated into standard lathe tool posts without special adapters. The combination of left‑hand orientation and the holder’s geometry suits reverse‑hand operations or setups where tooling access is constrained. The moderate weight of 0.52 kg makes handling and index changes straightforward for operators, while the tool’s dimensions facilitate close‑quarter turning tasks in production environments. Contact Metav Werkzeuge for application recommendations and direct supply from Emmerich — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: AP348TM Model: A20R PCLNL Manufacturer: Teknik Makina SKU: AP348TM Facts Shank diameter: 20 mm Overall length: 200 mm Diameter: 24 mm Cutting height: 50 mm Weight: 0.52 kg Cutting angle: 95° Special features Compatibility: CNMG 1204 indexable inserts Internal coolant: yes Cutting direction: left Pocket style: PCLN Feature: with coolant FAQ What inserts fit this holder and how are they mounted? The holder accepts CNMG 1204 indexable inserts; inserts are clamped into the PCLN pocket form and secured with the standard clamping screw, ensuring consistent seating for repeatable cutting. Is the coolant supplied through the bar or externally? This boring bar features internal coolant that directs fluid to the insert area; the integrated supply supports temperature control and chip management for prolonged cutting intervals. Can the bar be used for light‑ and medium‑duty turning operations? Yes, the A20R PCLNL holder from Teknik Makina is intended for light to medium turning tasks where a 20 mm shank and 200 mm reach provide the required stability and access. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a 20 mm shank for stable clamping with a TCMT 16T3 indexable-insert system and selectable 45° or 90° chamfer angles ensures consistent edge preparation and short changeover times; order the chamfer cutter directly via Metav Werkzeuge or ask our consultants if needed Chamfer cutter S341TM – indexable-insert chamfer cutter with 20 mm shank (Teknik Makina) A Chamfer cutter S341TM engineered for reliable edge breaking and bevel formation, compatible with TCMT 16T3 inserts and set up for 45° and 90° chamfers Stable 20 mm shank for secure clamping TCMT 16T3 insert compatibility for quick changes 45° and 90° chamfer capability for versatile use 30 mm cutting height for deeper chamfers when required Achieve consistent chamfer quality with fewer reworks The S341TM is designed to deliver repeatable chamfer results across serial production runs. The indexable-insert arrangement with TCMT 16T3 inserts allows the cutting edge to be renewed in seconds, which reduces the need for tool regrind and minimises scrap caused by worn edges. The availability of both 45°/90° settings supports common edge-preparation standards, so parts leave the machine with predictable geometry and a clean finish. This stabilises downstream processes and lowers overall production costs by cutting rework time. Faster changeovers and predictable process times Tooling downtime is reduced by the standard insert form and a straightforward fixing method. The insert is secured with a M3.5x8.5 Torx screw and adjusted with a T15 key, enabling rapid changes on the shop floor. The combination of an indexable system and a 20 mm shank means setup is both quick and repeatable, delivering measurable productivity gains. Where cycle times matter, the reduced intervention for tool maintenance translates directly into higher effective machine utilisation and steadier throughput. Robust design for stable machining and uniform results Built with a 24 mm cutter diameter and an overall length of 100 mm, the tool offers a balance between reach and rigidity that supports reliable material engagement. A 30 mm cutting height gives scope for deeper bevels without multiple passes, while the single insert configuration concentrates forces for clean chip control. At approximately 0.256 kg, the assembly is light enough for easy handling yet engineered for consistent performance on standard milling spindles. The design supports workshop environments seeking dependable edge preparation without complex set-ups. Speak to Metav Werkzeuge for tailored advice on the Teknik Makina chamfer cutter S341TM — technical consultation and secure delivery from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: S341TM Manufacturer: Teknik Makina eClass: 21180806 ETIM: EC011860 Facts Diameter: 24 mm Shank diameter: 20 mm Cutting height: 30 mm Overall length: 100 mm Cutting edges: 1 Weight: 0.256 kg Chamfer angles: 45°, 90° Special features Compatible inserts: TCMT 16T3 Torx screw: M3.5x8.5 Torx key: T15 FAQ Which chamfer angles are available with this tool? The chamfer cutter S341TM is set up for both 45° and 90° chamfers, allowing standard bevels to be produced without additional tooling. Which inserts fit the cutter? The S341TM accepts TCMT 16T3 indexable inserts; the insert is secured with a M3.5x8.5 Torx screw and tightened using a T15 key. Is the tool suitable for series production? Yes. The 20 mm shank and indexable-insert concept of the S341TM are intended to reduce downtime and provide repeatable results for batch and serial production. What are the key dimensions relevant for toolholders? Important dimensions are a 24 mm cutter diameter, 20 mm shank diameter and 100 mm overall length; these determine compatibility with standard holders. How quickly can an insert be changed? Insert change is a quick procedure using the M3.5x8.5 Torx screw and a T15 key; the indexable system is designed for fast, repeatable changeovers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of compact design, precise dimensions and compatibility with standard indexable inserts to reduce overhang, improve surface finish and keep clamping reliable; order the tool through Metav Werkzeuge or contact our consultants for application advice. S20Q STIR boring bar — STI for IR/ER indexable inserts (right-hand) S20Q STIR is a right-hand boring bar designed for internal turning with IR/ER indexable inserts, suited to workshops and production lines requiring stable clamping and predictable chip control Right-hand boring bar for IR/ER indexable inserts 24 mm head diameter, 20 mm shank 180 mm overall length, 40 mm cutting height Precision that reduces vibration and improves surface finish The bar’s compact 180 mm overall length and reduced overhang support a more stable cutting setup, which directly lowers vibration and enhances surface quality. The combination of a 20 mm shank and a 24 mm head diameter helps maintain rigidity in the holder; this is particularly beneficial for internal turning where overhang can compromise tolerances. Fewer vibrations mean longer life for inserts and smoother production runs, which translates into less rework and improved first-pass yield. Built for standard indexable inserts and straightforward handling Compatibility with IR/ER indexable inserts — specified here as 22 IR — allows fast insert changes and consistent seating in the clamping system. The tool’s ISO designation S20Q STIR signals standardised interfaces, making it straightforward to match with existing clamping holders such as the IR22 designation. Right-hand cutting orientation supports conventional turning operations and predictable chip flow, simplifying programming and setup on conventional lathes and multi-tasking machines. Practical dimensions and balanced weight for workshop efficiency The tool’s 40 mm cutting height provides sufficient engagement for typical internal turning tasks while keeping the assembly compact. At approximately 0.431 kg, the bar offers an advantageous balance between mass and manoeuvrability, aiding quick tool changes without compromising stability. These tangible dimensions support predictable run-out and repeatability, making the component a pragmatic choice for production environments that prioritise uptime and consistent part quality. For recommendations on integrating the S20Q STIR into existing toolholders, or to secure supply from Metav Werkzeuge, contact Metav Werkzeuge for tailored advice and dependable delivery from Emmerich Technical Data Article number: K358-1TM SKU: K358-1TM Facts Diameter: 24 mm Shank diameter: 20 mm Cutting height: 40 mm Overall length: 180 mm Weight: 0.431 kg Cutting direction: right Special features ISO designation: S20Q STIR Compatible inserts: 22 IR Clamping holder designation: IR22 Intended for IR/ER indexable inserts FAQ What inserts are compatible with this boring bar? The bar is compatible with IR/ER indexable inserts, specifically suited to the 22 IR insert format used with the S20Q STIR (SKU K358-1TM). Is the cutting orientation right-hand or left-hand? This tool is made for right-hand cutting, which matches standard turning directions on most lathes and multi-tasking centres. Which clamping holder fits the bar? The bar is specified alongside clamping holder designation IR22, enabling secure seating and repeatable clamping. Can the S20Q STIR be used in high-speed applications? Performance at high spindle speeds depends on machine setup and insert grade; the S20Q STIR provides a rigid platform that supports higher-speed cuts when paired with suitable inserts and correct clamping. What are the key dimensions to check before ordering? Verify the 24 mm head diameter, 20 mm shank, 180 mm overall length and 40 mm cutting height to ensure compatibility with the toolholder and the available machine envelope. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise insert compatibility, stable shank mounting and efficient three‑flute cutting for dependable production results; the tool supports fast insert changes and predictable cutting performance. Order the shank milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Teknik Makina Shank Milling Cutter — for LNMX Indexable Inserts (24 mm, 3 flutes) A Teknik Makina shank milling cutter engineered for indexable‑insert milling with LNMX 1006 inserts, suited to workshop and production tool setups 24 mm cutting diameter Robust 25 mm shank Tri‑flute geometry for efficient cutting Compatible with LNMX 1006 inserts Stable mounting and predictable cutting engagement The design centres on a 25 mm shank and a 24 mm cutting diameter, delivering a secure clamping interface and consistent radial stiffness during machining. The three‑flute geometry balances chip formation and load distribution, reducing vibration and improving surface regularity. With a 90° cutting angle and a 15 mm cutting length, the tool provides a defined engagement zone that simplifies cycle time calculation and process planning. These dimensional constants support predictable tool life and repeatable machining results in serial production. Faster insert changes and reduced downtime Indexable inserts are fixed with a M3x7 Torx screw that requires a T8 key, allowing quick exchange without special tooling. Compatibility with the LNMX 1006 insert format and known manufacturers such as Korloy minimises inventory complexity and accelerates procurement. The modular insert system means wear is addressed by replacing the small cutting element rather than the whole cutter body, which reduces per‑operation costs and shortens workshop turnaround. This configuration supports lean maintenance workflows and straightforward spare‑parts management. Integration into workshop tooling systems and operational benefits With an overall length of 100 mm and a finished mass of 0.389 kg, the cutter offers compact handling and predictable balance when mounted in standard holders. The tool body dimensions simplify fixture design and allow consistent tool‑offset entry in CAM routines. Using a standard indexable‑insert family reduces the number of unique geometries required across a tooling set, freeing budget for fewer, higher‑quality components. For buyers seeking dependable supply, Metav’s stock and logistics provide a reliable channel for timely replenishment and consistency across delivery batches. Contact Metav Werkzeuge to confirm availability of the Teknik Cutting Tools shank milling cutter with LNMX compatibility and to receive tailored technical advice from Emmerich's precision team. Technical data SKU: LN098TM Manufacturer: Teknik Makina Product type: Shank milling cutter for indexable inserts Facts Diameter: 24 mm Shank diameter: 25 mm Cutting length: 15 mm Overall length: 100 mm Number of flutes: 3 Weight: 0.389 kg Cutting angle: 90° Special features Compatible with LNMX 1006 indexable inserts Suitable for Korloy insert brand Torx screw: M3x7 Torx key size: T8 FAQ Which insert type fits this cutter? The cutter accepts LNMX 1006 indexable inserts; the system is compatible with common LNMX insert geometries used in industry. What are the main dimensions to check for toolholder compatibility? Key dimensions are 24 mm cutting diameter, 25 mm shank diameter and 100 mm overall length; the weight is 0.389 kg for balance considerations. How many flutes does the tool have and what is the cutting angle? The tool features 3 flutes and a 90° cutting angle, optimised for balanced chip removal and consistent engagement. How is the insert secured and which key is required? Inserts are fastened with an M3x7 Torx screw; a T8 Torx key is used to tighten and loosen the screw. Is the cutter compatible with Korloy inserts? Yes, the shank milling cutter is listed as compatible with Korloy for the corresponding LNMX insert sizes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the secure clamping provided by the M8 thread and the compact 17.1 mm head, which together ensure stable retention in precision measuring tools; combine this with a short 24 mm overall length for tight installation spaces, and order the part directly via Metav Werkzeuge or consult their advisors for application advice. Locking screw TC056TM – M8 thread, 17.1 mm head (Teknik Makina) Locking screw TC056TM designed for precision calipers and similar measuring instruments, providing compact, reproducible clamping where space and repeatability matter M8 thread for secure fastening Ø 17.1 mm head diameter Total length 24 mm Compatible with 5 mm Allen key Secure clamping for repeatable measurement results The M8 thread and substantial head diameter deliver a compact yet reliable clamping point that reduces play in measuring assemblies. This fixing element is intended for use in measurement and workshop settings where repeatability and positional stability are essential; by replacing worn fasteners with a standardized threaded component, measurement scatter is minimised and calibration intervals are easier to maintain. The component’s geometry supports even torque transmission, helping to avoid jaw misalignment on precision callipers and similar instruments. Fast adjustment and straightforward maintenance Adjustment is performed with a common 5 mm Allen key, allowing quick installation and tightening without specialised tooling. The short 24 mm length keeps the screw profile low, which benefits fixtures with confined clearance. Lightweight construction contributes to ease of handling during replacement and reduces additional load on delicate measuring heads. For workshops that require rapid on-bench swaps, this screw offers a pragmatic combination of accessibility and compact design that keeps downtime to a minimum. Compatibility and workshop integration As a standardised M8 fixing, this locking screw integrates easily into established maintenance routines and pairs with many precision calipers and gauging fixtures. The 17.1 mm head provides positive engagement for adjustment tools while remaining small enough for dense assemblies. When combined with structured inventory management from a reliable supplier, the part supports uninterrupted production and measurement workflows. For procurement, using standardised fasteners reduces part variety and simplifies spare-part logistics across measurement equipment fleets. For reliable clamping in precision measurement tools, request the Teknik Cutting Tools locking screw TC056TM from Metav Werkzeuge — contact Metav Werkzeuge in Emmerich for procurement guidance or technical clarification at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TC056TM Thread: M8 Head diameter: 17.1 mm Total length: 24 mm Weight: 0.1 kg Facts Thread size: M8 Head diameter: 17.1 mm Overall length: 24 mm Mass: 0.1 kg Special features Designed for precision calipers and measuring fixtures Adjustment with 5 mm Allen key Compact profile for restricted clearance assemblies FAQ What thread standard does this screw use? The screw uses an M8 thread, which is the metric standard specified for the TC056TM locking screw by Teknik Cutting Tools. Is this part suitable for precision calipers? Yes, the locking screw TC056TM is intended for use with precision calipers and similar measuring instruments where a compact, reliable clamp is required. Which tool is needed to tighten the screw? Tightening and adjustment require a 5 mm Allen key, allowing straightforward maintenance without specialised equipment. What are the dimensions of the head and overall length? The head diameter is 17.1 mm and the total length is 24 mm, dimensions selected for secure engagement in confined measuring assemblies. Can this screw be used as a direct replacement for other locking screws? Where the thread (M8), head clearance and length match, the TC056TM can be used as a replacement; compatibility should be confirmed against the original part’s dimensions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of high rigidity, straightforward insert compatibility and compact dimensions for reliable internal machining. Order the boring bar directly via Metav Werkzeuge or consult the technical team for tailored advice. Boring bar S20Q TTIR – Right‑hand toolholder with 20 mm shank for IR16 indexable inserts (Teknik Makina) The boring bar S20Q TTIR is a right‑hand toolholder designed for internal machining with 16 IR indexable inserts, offering a compact 180 mm overall length for tight set‑ups. S20Q TTIR ISO designation 20 mm shank diameter 180 mm overall length For 16 IR indexable inserts Engineered for consistent internal machining and rigidity The S20Q TTIR is built to deliver consistent internal machining where stability matters. With a 20 mm shank and a 180 mm overall length the bar minimises overhang while maintaining tool rigidity, which reduces vibration and improves surface quality. The 40 mm cutting height gives a secure seating for the insert, allowing precise tool positioning in confined bores. This construction supports predictable tool life and repeatable results in production runs. Compatible with industry indexable inserts for fast changeovers Designed for use with IR16 indexable inserts and the matching clamp system, the holder accepts the TA060 locating plate and the BSP010 washer for secure clamping. Compatibility with common insert geometries means quick, low‑skill insert replacement and minimal machine downtime. The right‑hand cutting orientation ensures the correct chip flow direction for standard internal turning applications, enabling efficient swarf evacuation and smoother cutting cycles. Fewer process interruptions through straightforward system integration Integration into existing tool inventories is straightforward: the bar’s ISO designation and common accessory interfaces reduce procurement complexity and spare‑part variety. By standardising on a compact, indexable system, workshop logistics are simplified and maintenance routines are faster. Coupled with Metav’s steady supply chain and technical backing, the toolholder supports uninterrupted production and easier planning for replacement inserts and clamping parts. For procurement or technical clarification on the Teknik Cutting Tools S20Q TTIR boring bar (SKU K338TM), contact Metav Werkzeuge for a supply recommendation or compatibility check at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: K338TM Manufacturer: Teknik Makina ISO designation: S20Q TTIR Secondary designation: SIR for IR Indexable Inserts SKU: K338TM Core dimensions Overall length: 180 mm Shank diameter: 20 mm Cutting height: 40 mm Weight: 0.445 kg Diameter: 24 mm Compatibility / Special features For indexable inserts: 16 IR Clamping insert holder: IR16 Locating plate: TA060 Pass washer: BSP010 Cutting direction: right FAQ Which inserts fit this toolholder? The S20Q TTIR boring bar (Teknik Cutting Tools, SKU K338TM) is specified for 16 IR indexable inserts and uses the TA060 locating plate with BSP010 washer for secure clamping. What are the main dimensions to check for machine setup? Key dimensions are a 20 mm shank diameter and 180 mm overall length; the cutting height is 40 mm, and the tool weight is 0.445 kg. Is the cutting direction standard or reversed? This toolholder has a right‑hand cutting direction, suitable for conventional internal turning operations where clockwise tool engagement is required. How does the design reduce downtime? Compatibility with standard IR16 inserts and common clamping parts enables fast insert changes and simpler spare‑part management, reducing machine downtime during routine maintenance. Which accessories are referenced for correct mounting? The bar is intended to be used with the TA060 locating plate and BSP010 pass washer together with the IR16 clamping system for correct seating and secure clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Efficient left-hand turning with CNMG 1204 indexable inserts and a 20 mm shank delivers stable cutting and simple insert changes; the coolant-free design avoids the need for internal coolant systems and eases maintenance. Order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. Boring bar — PCLN for CNMG indexable inserts, left-hand, 20 mm shaft (Teknik Makina) A compact boring bar designed for left-hand turning operations with CNMG 1204 indexable inserts, suitable where internal coolant is not required. Left-hand cutting direction For CNMG 1204 indexable inserts 20 mm shank diameter, 200 mm overall length No internal coolant required Stable cutting performance for left-hand turning The PCLN geometry combined with compatibility for CNMG 1204 inserts provides a balance of rigidity and accessibility for internal and external facing operations. The 20 mm shank offers a rigid mounting that reduces chatter and enhances surface finish, while the slightly larger 24 mm diameter at the cutting head improves stability. With a 95° cutting angle, the tool is suited to precise finishing cuts where dimensional accuracy matters. These characteristics translate into fewer reworks and steadier cycle times on production runs. Fast insert changes and secure clamping Specified to ISO as S20R PCLNR, the bar accepts standard CNMG indexable inserts, enabling quick insert replacement and compatibility with common insert grades. The standardised interface reduces setup time and inventory complexity, because compatible inserts and toolholders are widely available. The secure insert pocket and robust seat design ensure repeatable clamping, which supports consistent tool life and predictable machining results for batch work and single-piece manufacturing alike. Practical design to keep workshops productive At a 200 mm overall length and weighing 0.54 kg, the tool is compact enough for tight set-ups while providing sufficient reach for many turning tasks. The combination of shaft and head dimensions allows use with a wide range of holders designed for a 20 mm shank, reducing the need for special adaptors. The resulting ease of integration and minimal maintenance requirements help to lower machine downtime and simplify tool management in busy shops. Dry-ready operation for specific process requirements Designed without internal coolant, the bar is intended for processes that use external cooling, dry machining strategies, or where internal coolant is unnecessary or undesirable. The left-hand cutting orientation matches machines and operations that require counter-direction cutting, keeping process flows consistent. Choosing a coolant-free tool can simplify machine plumbing and reduce potential points of failure, while still delivering reliable cutting performance when paired with the appropriate insert grade. For technical advice or to secure this Teknik Makina boring bar from Metav Werkzeuge’s Emmerich stock, contact Metav Werkzeuge by eMail: info@metav-werkzeuge.com or by phone: +49 2822 7131930 to discuss suitability and availability Technical data Article number: P348TM Manufacturer: Teknik Makina ISO designation: S20R PCLNR Designation (EN): PCLN for CNMG indexable inserts Core dimensions Shank diameter: 20 mm Cutting height: 50 mm Overall length: 200 mm Diameter: 24 mm Weight: 0.54 kg Cutting angle: 95° Special features Left-hand cutting direction Without internal coolant For CNMG 1204 indexable inserts SKU: P348TM FAQ Is this bar compatible with standard CNMG insert grades? Yes. The boring bar is designed for CNMG 1204 indexable inserts and works with standard CNMG grades suited to the machining task. Can the bar be used where internal coolant is required? No. This model is supplied without internal coolant, so operations requiring through-tool coolant need an alternative tool with internal coolant provision. What does the ISO designation S20R PCLNR tell me? The S20R PCLNR ISO code indicates the shank and insert seat geometry, ensuring compatibility with holders and inserts that match that specification. Is the 20 mm shank suitable for common toolholders? Yes. The 20 mm shank conforms to common holder sizes, allowing straightforward installation in standard toolholders used in many workshops. Does the left-hand orientation affect setup on the lathe? Left-hand cutting direction means the tool is intended for counter-direction turning operations; check machine and programme orientation to ensure correct mounting of the bar. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com