DNMG150608-FP5 WPP10G WPP10G Wendeplatten - Walter Tools
High productivity and consistent surface finish result from the combination of the Tiger·tec Gold coating and the FP5 chipbreaker; the 0.8 mm corner radius increases edge stability under moderate interrupted or continuous cuts. Order directly via Metav Werkzeuge or request application advice from the consultants for optimum process parameters. DNMG150608-FP5 · DNMG150608-FP5 WPP10G · WPP10G Turning Insert for Steel (Tiger·tec Gold) — Walter Tools A DNMG150608-FP5 WPP10G turning insert engineered for high-productivity steel machining, combining a Tiger·tec Gold-coated carbide grade with an FP5 chipbreaker for reliable chip control. Tiger·tec Gold coated grade WPP10G FP5 chipbreaker for stable chip control Rhombus 55° insert shape 0.8 mm corner radius and 0° (negative) rake Improved process reliability through advanced grade technology The WPP10G grade, employed in the Tiger·tec Gold series, is a coated carbide solution optimised for the thermal and mechanical demands of steel machining. Designed for the ISO group P, the grade balances wear resistance and toughness to sustain longer tool engagement and more consistent component quality. This results in measurable gains in process reliability and repeatability when replacing conventional grades, especially in mixed production runs where varied cut conditions occur. Consistent chip formation and edge strength for predictable finishes The combination of the FP5 chipbreaker with a Rhombus 55° geometry delivers controlled chip breakage and low built-up edge tendency during turning operations. The 0.8 mm corner radius increases edge robustness, while the 0° (negative) rake angle reinforces the cutting edge for heavier engagement and interrupted cuts. These features translate into improved surface finish and reduced rework, as well as predictable tool behaviour that supports tighter process windows on medium-duty turning tasks. Operational benefits that support productivity and planning Adopting this insert in serial or batch turning workflows gives a clear operational advantage: the Tiger·tec Gold coating contributes to stable wear patterns and longer service intervals, while the FP5 geometry simplifies chip handling at typical steel cutting parameters. Tooling stock levels become easier to manage owing to consistent life expectancy, and the insert’s geometry suits many standard turning applications where a balance of economy and robust performance is required. For application-specific recommendations, compatibility with existing toolholders and suggested parameter windows can be provided by the technical team. Contact Metav Werkzeuge for application advice and to order Walter Tools DNMG150608-FP5 WPP10G turning inserts with Tiger·tec Gold; eMail info@metav-werkzeuge.com or call +49 2822 7131930. Technical data SKU: DNMG150608-FP5-WPP10G-WALTER Manufacturer: Walter Tools Product type: Turning insert Series: Tiger·tec Gold Grade: WPP10G Chipbreaker: FP5 ISO designation: DNMG150608-FP5 WPP10G Execution: G Tolerance class: M Core technical data Insert size: 15 Thickness code: 06 Corner radius: 0.8 mm Rake angle: 0° (negative) Insert shape: Rhombus 55° Special features Tiger·tec Gold coating technology WPP10G coated carbide grade FP5 chipbreaker for stable chip control Suitable for steel (P) Robust edge for mixed production conditions FAQ What materials is this insert suitable for? The DNMG150608-FP5 WPP10G is specified for steel applications (ISO group P) and is designed to handle the thermal and chip-formation characteristics typical of unalloyed and alloyed steels. How does the FP5 chipbreaker affect machining? The FP5 geometry promotes controlled chip formation and evacuation; on the WPP10G grade this contributes to stable cutting conditions and improved surface finish in turning operations. What advantage does the Tiger·tec Gold coating provide? Tiger·tec Gold enhances wear resistance and thermal performance of the WPP10G coated carbide, supporting longer tool life and increased process security during continuous and interrupted cuts. Is the insert suitable for interrupted cuts? The 0° (negative) rake and the 0.8 mm corner radius give the insert a robust cutting edge that performs reliably under moderate interruptions, improving edge stability and resistance to chipping. How to obtain specification sheets or application data for this insert? Specification details and recommended machining windows for the DNMG150608-FP5 WPP10G turning insert are available on request from Metav Werkzeuge or Walter Tools technical documentation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, brand-new product from the manufacturer.
DNMG150608-FP5 WPP20G WPP20G Wendeplatten - Walter Tools
Taking advantage of Tiger·tec Gold coating and the WPP20G grade ensures consistent tool life and reliable chip control for steel turning; combine high wear resistance with a defined FP5 chipbreaker and order directly via Metav Werkzeuge or consult the product specialists if application advice is required. DNMG150608-FP5 WPP20G turning insert — Tiger·tec Gold, for steel — Walter Tools DNMG150608-FP5 WPP20G is a coated carbide turning insert engineered for general steel machining, offering robust wear resistance within the Tiger·tec Gold series. Tiger·tec Gold coated carbide grade WPP20G FP5 chipbreaker for controlled chip formation Rhombic 55° geometry for versatile turning 0° negative rake for stable cutting edge Improved productivity through advanced coating and grade The Tiger·tec Gold coating combined with the WPP20G carbide grade provides a balance between wear resistance and toughness that translates into longer tool life and fewer index changes. For operations on steel, this combination reduces flank wear under typical cutting temperatures and supports consistent dimensional results. The coated substrate lowers thermal softening at the cutting edge, which helps maintain cutting performance over extended cycles and contributes to lower overall machining costs. Reliable chip control and stable cutting geometry The insert’s FP5 chipbreaker is designed to shape and evacuate chips efficiently in a wide range of turning conditions, improving surface finish and reducing the risk of built-up edge. The rhombic 55° form and 0° negative rake create a stable cutting geometry that is particularly effective in longitudinal and facing operations. With a corner radius of 0.8 mm, the insert balances edge strength and surface integrity, enabling reproducible results on medium to heavy cuts while helping to avoid premature edge chipping. Practical advantages for workshop process planning As a standard indexable insert within the Tiger·tec Gold series, this component supports predictable tool change intervals and straightforward process documentation. The designation DNMG150608-FP5 identifies the geometry and functional details needed for toolholder selection and process sheets. For shops aiming to standardise on robust carbide grades, the insert’s combination of WPP20G wear characteristics and the FP5 chip control helps reduce downtime and simplifies inventory management, offering measurable gains in throughput and process stability. Contact Metav Werkzeuge for tailored cutting parameters and to secure this Walter Tools Tiger·tec Gold insert via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DNMG150608-FP5-WPP20G-WALTER Designation: DNMG150608-FP5 WPP20G Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Plate size: 15 Plate thickness: 06 Rake angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP20G Chipbreaker: FP5 Plate form: Rhombus 55° Series: Tiger·tec Gold Material application: Steel Execution: G Product type: Drehwendeschneidplatte (turning indexable insert) FAQ What materials is this insert suitable for? The DNMG150608-FP5 WPP20G is specified for machining steel and is formulated to manage the typical heat and chip formation encountered in steel turning. How does the FP5 chipbreaker influence machining? The FP5 chipbreaker on this insert shapes chips to improve evacuation and surface finish; combined with the WPP20G grade it supports stable cutting in a broad range of steel applications. Can this insert be used for finishing and roughing operations? With a 0.8 mm corner radius and the 0° negative rake, the insert provides a compromise between edge strength and finish quality, making it suitable for both medium finishing and moderate roughing tasks. Which toolholders match the DNMG150608-FP5 geometry? Standard DNMG-compatible turning toolholders designed for rhombic 55° inserts and the specified plate thickness are appropriate; check clamping specifications against the DNMG150608 designation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision metal‑cutting tools and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for clarification only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
DNMG150608-FW5 WKP01G WKP01G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WKP01G grade for extended tool life and stable chip control; the rhombic 55° geometry with a 0.8 mm corner radius and FW5 chipbreaker supports productive turning in steel and cast iron. Order the DNMG150608-FW5 WKP01G directly via Metav Werkzeuge or request technical advice from the consultants. DNMG150608-FW5 WKP01G indexable turning insert – Tiger·tec Gold, Rhombus 55° (Walter Tools) The DNMG150608-FW5 WKP01G is a rhombic 55° indexable turning insert with Tiger·tec Gold technology, designed for high-productivity machining of steel and cast iron. Tiger·tec Gold coated grade WKP01G Rhombic 55° insert geometry FW5 chipbreaker for controlled chips 0.8 mm corner radius, 0° negative rake Longer tool life through advanced coating and grade The combination of Tiger·tec Gold surface technology and the WKP01G coated carbide grade provides improved wear resistance and consistent edge stability. This coating system reduces flank and crater wear during continuous turning operations, which translates into fewer tool changes and higher uptime. For customers familiar with ISO material groups, the insert is optimised for P (steel) and K (cast iron) applications; this means the microstructure and coating are engineered to handle the heat generation and abrasive wear typical of those workpiece families. Coated carbide refers to a cemented carbide substrate with a thin engineered coating that improves hardness at the cutting edge while maintaining toughness in the body. Geometry and chip control that protect surface finish and productivity The rhombic 55° form combined with the FW5 chipbreaker promotes predictable chip formation and evacuation, reducing the risk of entanglement and secondary damage to the workpiece. A 0.8 mm corner radius contributes to edge strength and a consistent machined surface, while the 0° negative rake geometry increases cutting-edge robustness in interrupted cuts or hard spots. In practice, these geometric choices help maintain dimensional stability and surface quality in medium to heavy turning operations, particularly when machining cast components or alloyed steels where chip behaviour and abrasive wear are critical factors. Practical fit and application benefits for workshop use Specified as a DNMG format with an inscribed circle of 15 and a plate thickness of 06, this insert is compatible with standard turning toolholders that accept DNMG indexable parts. The M tolerance class ensures repeatable positioning in pocket systems, supporting consistent machining across batch production. The FW5 chipbreaker is suitable for general turning tasks; it balances chip shape with cutting forces to support longer continuous cuts. For procurement and workshop planning, the insert’s set of features—grade, coating, chipbreaker and geometry—delivers improved process reliability and reduced tooling-related interruptions in workshops focused on steel and cast-iron components. Contact Metav Werkzeuge to discuss suitable toolholders and application parameters for the Walter Tools DNMG150608-FW5 WKP01G or to request a tailored quotation and machining recommendations Technical data SKU: DNMG150608-FW5-WKP01G-WALTER Article designation: DNMG150608-FW5 WKP01G Series: Tiger·tec Gold Facts Insert form: Rhombus 55° Inscribed circle: 15 Thickness: 06 Corner radius: 0.8 mm Rake angle: 0° (negative) Chipbreaker: FW5 Tolerance class: M Special features Grade/sort: WKP01G Substrate/coating technology: Tiger·tec Gold (coated carbide) Suitable for: Steel (P), Cast iron (K) Execution: G Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The DNMG150608-FW5 WKP01G is designed for steel (P) and cast iron (K) machining; the WKP01G grade and Tiger·tec Gold technology are tuned for these material groups. How does the FW5 chipbreaker affect machining? The FW5 chipbreaker on this Walter Tools insert promotes controlled chip segmentation and evacuation, supporting stable cutting forces and improved surface finish in general turning operations. What does the 0° negative rake imply for cutting performance? A 0° negative rake increases edge strength and resistance to impact, making the insert well suited to interrupted cuts and applications with variable depths of cut where robustness is required. Is this insert compatible with standard DNMG toolholders? Yes, the DNMG150608-FW5 WKP01G fits common toolholders that accept DNMG inserts with a 15 inscribed circle and the specified thickness. How does Tiger·tec Gold benefit production processes? Tiger·tec Gold coating enhances wear resistance and thermal stability at the cutting edge, helping to extend tool life and maintain consistent part quality in demanding turning cycles. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only; there is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product from the manufacturer.
DNMG150608-FW5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the WPP10G grade combined with a robust FW5 chipbreaker for reliable, repeatable performance in Stahl turning operations; this insert balances wear resistance and versatile cutting capability to keep production running smoothly. Order the DNMG150608‑FW5 WPP10G turning inserts directly via Metav Werkzeuge or ask the consultants for cutting-data and application advice. DNMG150608‑FW5 WPP10G turning insert — Tiger‑tec Gold, for Stahl | Walter Tools DNMG150608‑FW5 WPP10G is a negative‑rake indexable turning insert designed for general Stahl turning and medium‑duty production work Tiger‑tec Gold coated WPP10G grade Rhombic 55° geometry for versatile turning 0.8 mm corner radius for reliable finishes Negative 0° rake with FW5 chipbreaker High wear resistance where consistent tool life matters The coated carbide grade from the Tiger‑tec Gold series, WPP10G, is engineered for stable wear behaviour and extended cutting-edge life when machining Stahl (ISO 513 P). The multilayer coating reduces abrasive wear and supports predictable flank‑wear progression; this is particularly valuable in longer runs where tool‑change intervals must be minimised. As a consequence, cycle times are stabilised and process planning becomes more reliable, since tool wear is better controlled compared with uncoated grades. The insert’s construction allows for dependable performance in a range of common turning operations while maintaining surface quality. Geometry and chip control that improve surface quality A rhombic 55° insert shape with a 0.8 mm nose radius provides a balance between strength and surface finish: the geometry supports dimensional accuracy and prevents rapid edge chipping during interrupted cuts. The FW5 chipbreaker is tuned to produce short, manageable chips when turning Stahl, improving evacuation and reducing the risk of built‑up edge; this promotes consistent finishes and reduces rework. The negative 0° free angle increases edge strength for heavier cuts and intermittent machining, which means fewer insert replacements and steadier part tolerances in mixed‑duty production environments. Reliable fit, tolerance control and production suitability Manufactured to tolerance class M, the insert ensures consistent seat and clamping behaviour in standard toolholders, simplifying tool set‑up and repeatability on the shop floor. Size and thickness codes are designed to match common DNMG pockets, aiding quick inventory selection and replacement. The combination of grade, coating and chipbreaker targets efficient material removal while protecting the cutting edge, thus supporting higher productivity and lower overall tool costs for batch and continuous operations. For machining parameters and recommended feeds and speeds, cutting-data can be provided to support process optimisation. Contact Metav Werkzeuge for tailored cutting data, availability and to secure DNMG150608‑FW5 WPP10G inserts from Walter Tools — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: DNMG150608-FW5-WPP10G-WALTER Product type: Turning insert Designation: DNMG150608-FW5 WPP10G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP10G Facts Corner radius: 0.8 mm Free angle: 0° (negative) Insert form angle: 55° Plate size: 15 Plate thickness code: 06 Tolerance class: M Special features Chipbreaker: FW5 Coating technology: Tiger·tec Gold Material class suitability: Stahl (ISO 513 P) Schneidstoffklasse: coated carbide Geometry: rhombic 55°; negative rake FAQ Which materials can be machined with this insert? The DNMG150608‑FW5 WPP10G insert is specified for machining Stahl and is classified to work with material group P under ISO 513. What does the WPP10G grade offer compared with general grades? WPP10G is a Walter Tools grade in the Tiger‑tec Gold family that offers optimised wear resistance and stable chip formation for extended tool life under typical Stahl turning conditions. How does the FW5 chipbreaker influence machining performance? The FW5 chipbreaker on this insert produces short, controllable chips in Stahl machining, improving evacuation, surface finish consistency and reducing the likelihood of built‑up edge. Is the negative 0° free angle suitable for heavy cuts or interrupted machining? Yes, the negative 0° free angle increases cutting‑edge strength, making the insert well suited to heavier cuts and interrupted turns where edge robustness is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Mention of brand names such as Walter Tools is for explanatory purposes only; there is no affiliation between our company and the named manufacturers. The offered article is an original, factory‑new product of the manufacturer.
DNMG150608-FW5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WPP20G grade combined with the FW5 chipbreaker for consistent chip control and productive steel machining; order the insert directly via Metav Werkzeuge or ask the consultants for application advice DNMG150608-FW5 WPP20G – indexable turning insert with Tiger·tec Gold coating for steel, FW5 chipbreaker A DNMG150608-FW5 WPP20G insert designed for robust turning of steel components, offering reliable chip control and a stable cutting edge in demanding production environments Tiger·tec Gold coating for extended life WPP20G grade optimised for steel FW5 chipbreaker for controlled chips Rhombic 55° form with 0.8 mm corner radius Higher productivity through a coating-engineered grade The combination of the Tiger·tec Gold coating and the WPP20G grade provides a balance between wear resistance and toughness that is particularly suited to machining steels. The coated carbide construction supports longer cutting intervals under typical heat and chip formation conditions for steel (ISO group P). This results in fewer tool changes and a more consistent production rhythm, contributing to measurable improvements in machining throughput and process stability. Stable chip control for safer operations and finish The FW5 chipbreaker paired with the rhombic 55° geometry and 0° negative rake produces predictable chip formation during a wide range of turning operations. The 0.8 mm corner radius improves edge strength, reducing the risk of premature chipping when encountering interrupted cuts or harder zones in steel blanks. Together, these features help maintain a reliable surface quality and reduce secondary finishing effort. Practical integration and inventory efficiency Marked as DNMG150608-FW5 in the Tiger·tec Gold series, the insert fits standard DNMG toolholders and follows common industry tolerances (class M), simplifying tool management on the shop floor. The clear designation and proven grade allow straightforward matching to machining tasks on steel components, lowering setup complexity and supporting reproducible, repeatable results in turning operations. Walter Tools’ execution G further denotes the specific geometry and edge condition intended for general-purpose steel turning. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and to secure DNMG150608-FW5 WPP20G for steel turning; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data SKU: DNMG150608-FW5-WPP20G-WALTER Label: Drehwendeschneidplatte DNMG150608-FW5 WPP20G Walter Tools Manufacturer: Walter Tools Product type: Turning insert (indexable) Facts Corner radius: 0.8 mm Rake angle: 0° (negative) Insert form: Rhombic 55° Size designation: 15 Thickness designation: 06 Special features Grade: WPP20G Series: Tiger·tec Gold Chipbreaker: FW5 Application group: Steel (P) Tolerance class: M Execution: G Plate designation: DNMG150608-FW5 FAQ Is this insert suitable for machining steel? Yes. The DNMG150608-FW5 WPP20G is specified for steel machining (ISO group P) and the WPP20G grade is optimised for the heat and chip formation typical of steel turning. What chip control can be expected with this geometry? The FW5 chipbreaker combined with the rhombic 55° form promotes predictable chip breaking and safe evacuation, improving uninterrupted machining when using the DNMG150608-FW5 insert. What does the 0° negative rake mean for cutting? A 0° negative rake provides a robust cutting edge that tolerates higher cutting forces and occasional interruptions better than positive-rake configurations, which benefits stability in steel turning operations. What corner radius is recommended for finish and strength? This insert features a 0.8 mm corner radius, offering a compromise between edge strength and the ability to achieve consistent surface finishes on turned steel parts. Will this insert fit standard DNMG toolholders? Yes. The DNMG150608-FW5 designation corresponds to standard DNMG holders; tolerance class M and the common plate form simplify integration into existing tool setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes and to describe product compatibility. There is no connection between our company and the mentioned brands. The offered article is original factory-new goods of the manufacturer (Walter Tools).
DNMG150608-FW5 WSM10S WSM10S Wendeplatten - Walter Tools
The combination of a coated carbide grade and a controlled chipbreaker results in reliable performance when machining challenging alloys; the WSM10S grade and FW5 chipbreaker deliver secure chip control and extended edge life. Order the DNMG150608-FW5 WSM10S directly via Metav Werkzeuge or consult our advisers for application support. DNMG150608-FW5 WSM10S indexable turning insert — Tiger·tec Silver, FW5 chipbreaker, Walter Tools The DNMG150608-FW5 WSM10S is an indexable turning insert designed for productive machining of rostfreier Stahl and heat‑resistant superalloys in demanding turning operations. Tiger·tec Silver grade for extended tool life FW5 chipbreaker for stable chip control Rhombic 55° geometry for versatile turning 0° negative rake for secure cutting edge Consistent results on rostfreier Stahl and superalloys The coated carbide WSM10S grade, part of the Tiger·tec Silver family, is formulated for the thermal and mechanical demands of rostfreier Stahl and heat‑resistant alloys. The composition combines wear resistance with thermal stability to reduce edge degradation when temperatures rise. For the shop floor, this means fewer insert changes and more predictable cycle times; the material selection supports a steady cutting action that lowers the risk of built‑up edge and improves process repeatability. Stable cutting edge and surface integrity With a 0° negative rake and a 0.8 mm corner radius, the insert provides a robust cutting geometry that favours a stable cutting edge under heavy or interrupted cuts. The rhombic 55° shape offers good approach angles for general turning and facing tasks, producing consistent surface finishes while protecting the insert tip. In practice, the geometry translates into reduced chatter and dependable dimensional control when working across varied component contours. Controlled chip formation for continuous productivity The FW5 chipbreaker is engineered to promote reliable chip segmentation across feeds commonly used in finishing and light roughing. Effective chip control reduces downtime caused by tangled or long chips and supports uninterrupted operation in automatic and semi‑automatic lathes. For machinists, this yields improved workplace safety and a smoother removal of machined parts from the chuck, while also protecting adjacent toolholders and workpiece surfaces. Practical compatibility and handling on the machine The insert is supplied in the DNMG format with a thickness code 06 and an inscribed circle of 15 mm, enabling use in many standard turning toolholders that accept DNMG inserts. The coated carbide grade is suited to existing machining setups with conventional coolant strategies; selection of cutting data should consider alloy, toughness, and component tolerance requirements. If cutting parameters or holder compatibility are unclear, application advice is available to ensure optimal insertion and clamping. Contact Metav Werkzeuge to discuss Walter Tools Tiger·tec Silver inserts and secure process‑reliable machining with the DNMG150608-FW5 WSM10S. Technical data SKU: DNMG150608-FW5-WSM10S-WALTER Article designation: DNMG150608-FW5 WSM10S Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts Size: 15 mm Thickness code: 06 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Special features Grade: WSM10S Series: Tiger·tec Silver Chipbreaker: FW5 Plate form: Rhombus 55° Suitable materials: rostfreier Stahl and superalloys (S / M) Coated carbide, optimised for stable chip formation FAQ What materials is this insert intended for? The DNMG150608-FW5 WSM10S from Walter Tools is designed primarily for rostfreier Stahl and heat‑resistant superalloys, where the WSM10S grade supports secure chip formation and edge stability. What benefit does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on this insert enhances wear resistance and thermal stability, extending tool life and maintaining cutting performance under elevated temperatures. How does the FW5 chipbreaker affect machining? The FW5 chipbreaker promotes segmented chips and consistent evacuation, lowering the risk of chip entanglement and supporting continuous production in turning operations. Is the DNMG150608-FW5 compatible with standard holders? Yes, the DNMG format with a 15 mm inscribed circle and thickness code 06 fits common toolholders designed for DNMG inserts; correct clamping seat and torque should be observed. Can this insert be used for both finishing and light roughing? The combination of a 0.8 mm corner radius and a robust grade makes the insert suitable for finishing and light roughing, balancing edge strength with surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150608-FW5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating and the WSM20S grade for reliable machining of tough alloys and stainless steel, together with the FW5 chipbreaker and a 0.8 mm corner radius for controlled chip flow and consistent surface quality — order directly via Metav Werkzeuge or contact the consultants for process recommendations. DNMG150608-FW5 WSM20S indexable turning insert for stainless steel and superalloys — Walter Tools DNMG150608-FW5 WSM20S is a robust indexable turning insert optimised for high thermal loads and demanding workpiece materials, providing stable cutting performance in interrupted and continuous cuts Tiger·tec Silver coating for extended tool life WSM20S grade for stainless steel and superalloys FW5 chipbreaker for reliable chip control Rhombic 55° form with 0.8 mm corner radius High process reliability for demanding materials The combination of the WSM20S carbide grade and the Tiger·tec Silver coating creates a cutting system tailored to the specific challenges of stainless steel and heat-resistant superalloys. These materials tend to generate high temperatures and sticky chips; the selected grade emphasises thermal stability and edge robustness, reducing the risk of built-up edge and unplanned downtime. The result is a predictable life cycle and improved first-pass yield in series production. Consistent chip control and improved surface finish Equipped with the FW5 chipbreaker and a Rhombic 55° form, this insert maintains controlled chip formation even under heavy conditions. The 0° negative relief angle supports secure cutting at low to medium feeds, while the 0.8 mm corner radius balances edge strength and finishing capability. Together, these features enhance chip evacuation, lower the incidence of rework and contribute to a more consistent surface quality on difficult-to-machine parts. Geometry engineered for secure clamping and versatile use The DNMG geometry (size 15, thickness 06) ensures a stable mechanical interface in conventional toolholders and modern modular systems. The tolerance class M supports reproducible seating and repeatability across tool changes, which is particularly important in automated production. The insert’s design permits flexible positioning for turning operations that require a balance between roughing capacity and finishing accuracy. Economic performance through extended tool life By combining a wear-resistant coating with a grade optimised for high-temperature performance, this insert reduces the frequency of tool changes and the associated machine idle time. For batch and continuous processes where tool-change intervals affect throughput, the Tiger·tec Silver technology and grade selection pay back through increased productivity and lower per-part tooling costs. The insert is a practical choice where consistent results and process security are priorities. Contact Metav Werkzeuge for tailored recommendations on tooling setups, cutting data and stock availability — Metav Werkzeuge provides fast technical advice and reliable supply for Walter Tools products via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DNMG150608-FW5-WSM20S-WALTER Product: Indexable turning insert Brand: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Numbers / Core technical data Size: 15 Thickness: 06 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Design / Special features Chipbreaker: FW5 Coating: Tiger·tec Silver Applicable materials: stainless steel (M), superalloys and titanium (S) Form: Rhombic 55° Execution: G FAQ What materials is this insert best suited for? The DNMG150608-FW5 WSM20S insert is designed for stainless steel (M) and heat-resistant superalloys/titanium (S), with the WSM20S grade providing thermal resilience and stable cutting performance. How does the FW5 chipbreaker affect machining? The FW5 chipbreaker on the Walter Tools insert promotes short, controlled chips and consistent chip flow, improving process stability and reducing the likelihood of entanglement during continuous turning. Is the insert suitable for finishing operations? Yes. The combination of a 0.8 mm corner radius and the Rhombic 55° geometry supports a balance of edge strength and surface quality, making it suitable for many finishing tasks when set with appropriate feeds and speeds. Does the Tiger·tec Silver coating increase tool life? The Tiger·tec Silver coating enhances wear resistance and thermal stability, leading to longer tool life under elevated temperatures typical of machining stainless steel and superalloys. What tolerance and seating accuracy can be expected? The insert is supplied in tolerance class M, which provides reproducible seating in standard clamping systems and contributes to repeatable tool changes and consistent profiles. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Trademarked names and product designations are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation and reference. There is no affiliation or partnership implied between Metav Werkzeuge and the trademark owners. The offered item is an original, new product from the stated manufacturer.
DNMG150608-MK5 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the wear-resistant WKK10S grade for consistent performance when machining cast iron; order the insert directly via Metav Werkzeuge or consult the team for application support. DNMG150608-MK5 WKK10S indexable turning insert – Walter Tools, Tiger·tec Silver, for cast iron machining DNMG150608-MK5 WKK10S is an indexable turning insert designed for economical, high-productivity cutting of cast iron components in industrial turning applications Tiger·tec Silver series for extended tool life WKK10S grade optimised for cast iron machining MK5 chipbreaker for controlled chip formation Rhombus 55° geometry with 0.8 mm corner radius Built for reliable chip control and stable productivity The combination of the MK5 chipbreaker and the Tiger·tec Silver coating delivers stable, repeatable chip formation when turning abrasive cast iron materials. The insert’s geometry, a rhombus 55° shape with a small 0.8 mm corner radius, helps maintain cutting-edge integrity and reduces vibration in interrupted cuts. For production environments this translates into fewer tool changes and longer uninterrupted cycle times, which supports a more efficient machining process and predictable operating costs. Precision geometry that eases set-up and improves surface finish With a negative rake of 0° and the robust cutting edge provided by the WKK10S coated carbide grade, the insert offers secure edge strength for heavy and medium cutting operations in the K-material group (cast iron). Negative geometry increases tool stability under load, making it suitable for roughing passes where toughness is required. The defined form and consistent corner radius aid surface quality control, reducing rework and post-process finishing while retaining stable dimensional results. Material focus and application advantages Engineered specifically for cast iron (ISO K), the coated cemented carbide composition of this grade balances abrasion resistance with toughness to handle the typically short, brittle chips of cast materials. The Tiger·tec Silver technology contributes to thermal and wear resistance, which is particularly beneficial when machining abrasive grades of cast iron. Where predictable tool life and process consistency are priorities, this insert supports a productive workflow and reliable results across serial production and demanding single-part runs. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Silver inserts and ensure optimal performance for cast iron turning operations Technical data Article number: DNMG150608-MK5-WKK10S-WALTER Designation: DNMG150608-MK5 WKK10S Type: Indexable turning insert (turning insert) Manufacturer: Walter Tools Series: Tiger·tec Silver Numbers / Core technical data Inscribed circle: 15 mm Thickness code: 06 Corner radius: 0.8 mm Tolerance class: M Rake angle: 0° (negative) Insert form: Rhombus 55° Designs / Special features Coated cemented carbide grade WKK10S Chipbreaker: MK5 Application group: ISO K (cast iron) Optimised for abrasive wear and short, breaking chips Stable cutting edge for productive turning FAQ What materials is this insert best suited for? The DNMG150608-MK5 WKK10S insert from Walter Tools is optimised for cast iron (ISO K) applications and is designed to handle the abrasive wear and short, breaking chips typical of those materials. How does the MK5 chipbreaker benefit production? The MK5 chipbreaker promotes controlled chip formation with the DNMG150608-MK5 WKK10S, improving process stability and reducing the risk of chip-related interruptions during turning operations. Does the Tiger·tec Silver coating improve tool life? Yes, the Tiger·tec Silver coating on the WKK10S grade increases wear resistance and thermal stability for more consistent tool life when machining cast iron under industrial conditions. What cutting geometry should be expected from this insert? This insert features a rhombus 55° form with a 0.8 mm corner radius and a negative 0° rake, providing a robust edge for heavier cuts and improved dimensional stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Protected trademarks and brand names are mentioned for identification and explanatory purposes only. There is no affiliation between our company and the trademark owners. The offered item is original and brand-new from the manufacturer (Walter Tools).
DNMG150608-MK5 WKK20S WKK20S Wendeplatten - Walter Tools
Benefit from high wear resistance and stable cutting performance thanks to the Tiger·tec Silver coating and the WKK20S grade, optimised for abrasive cast‑iron applications; order the insert directly via Metav Werkzeuge or contact our consultants for machining advice. DNMG150608-MK5 WKK20S turning insert, Tiger·tec Silver coating, for cast iron — Walter Tools The DNMG150608-MK5 WKK20S is a rhombic 55° turning insert with an MK5 chipbreaker, designed for reliable performance when machining cast iron materials. Tiger·tec Silver coating for wear resistance Optimised for cast‑iron machining Rhombic 55° geometry, 0.8 mm corner radius Negative 0° rake for stable cutting Longer tool life from coating and grade selection The combination of Tiger·tec Silver surface technology and the WKK20S grade means a coated carbide construction that is tuned to resist the abrasive wear typical of cast materials. Coatings act as a thermal and mechanical barrier on the cutting edge, delaying flank and crater wear; this translates into extended tool life and fewer indexings in production. For operations with frequent short, brittle chips, the chosen grade delivers consistent edge condition and therefore more predictable tool‑change intervals. Geometry and chip control for consistent process stability The rhombic 55° form with a 0.8 mm corner radius and the MK5 chipbreaker prioritise controlled chip formation and a balanced cutting edge. A negative 0° relief angle increases edge strength and reduces vibration in interrupted cuts, while the chipbreaker geometry helps to break and evacuate chips reliably—improving surface finish and reducing risk of rework. Explaining briefly: a chipbreaker modifies chip flow so that short, broken chips form instead of long, entangling swarf, which is particularly useful when machining grey or nodular cast iron. Practical benefits for production environments Specified as an insert for cast‑iron machining (ISO group K), this turned tool grade supports higher process reliability and lower downtime in repetitive turning tasks. The robust edge condition and optimised chip control contribute to consistent dimensional results and can reduce cycle times through stable cutting parameters. Shops aiming to improve throughput with fewer interruptions will find the insert offers a balance of wear resistance and mechanical strength that aids continuous production. For material groups outside cast iron, assessment by tooling specialists is recommended to confirm suitability. Contact Metav Werkzeuge for expert selection of Walter Tools Tiger·tec Silver inserts — email info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: DNMG150608-MK5-WKK20S-WALTER Designation: DNMG150608-MK5 WKK20S Product type: Turning insert Manufacturer: Walter Tools Core specifications Insert size: 15 Plate thickness: 06 Corner radius: 0.8 mm Relief angle: 0° (negative) Shape: Rhombic 55° Tolerance class: M Chipbreaker: MK5 Applications & features Coating: Tiger·tec Silver Grade: WKK20S (coated carbide) Material suitability: Cast iron (ISO group K) Execution: G Optimised for abrasive wear and short, breaking chips FAQ What materials is this insert designed for? The DNMG150608-MK5 WKK20S insert is optimised for machining cast iron (ISO group K) and is designed to handle the abrasive wear and short, breaking chips typical of those materials. What advantage does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WKK20S grade offers improved wear resistance and thermal stability, helping the insert maintain edge condition for longer in cast‑iron operations. How does the MK5 chipbreaker affect machining? The MK5 chipbreaker on the DNMG150608-MK5 WKK20S controls chip form to produce short, manageable chips, which improves evacuation and reduces the risk of chip entanglement during turning. What are the key geometric features to note? The insert features a rhombic 55° shape, a 0.8 mm corner radius and a negative 0° relief; these characteristics enhance edge strength and process stability, especially for interrupted cuts. Is this insert suitable for high‑speed turning? The WKK20S grade and its coating are aimed at durability in abrasive cast‑iron applications; cutting speeds should be chosen according to machine capability and specific casting properties to ensure optimal performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and brand names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the brands named. The offered item is original and brand‑new from the manufacturer.
DNMG150608-MM5 WMP20G WMP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold wear protection and the MM5 chipbreaker for secure chip formation and longer tool life when machining stainless steel; order the insert directly via Metav Werkzeuge or consult the specialists for process optimisation. DNMG150608-MM5 WMP20G indexable turning insert — Tiger·tec Gold, for stainless steel (ISO M) — Walter Tools DNMG150608-MM5 WMP20G is a rhombic 55° indexable turning insert designed for reliable finishing and medium-duty turning of stainless steel components in industrial production. Tiger·tec Gold coating for longer tool life Optimised MM5 chipbreaker for stable chip control Rhombic 55° geometry for versatile turning Suitable for stainless steels (ISO group M) High-performance coating and predictable tool life The combination of the Tiger·tec Gold coating and a coated carbide substrate ensures a balance between wear resistance and edge toughness. This insert is engineered to reduce flank wear under the demands of machining stainless steel, materials known for high heat generation and built-up edge formation. The result is more consistent component tolerances and reduced rework. The coating technology supports elevated cutting temperatures and contributes to a longer service life, which lowers tool-change frequency and enhances overall process efficiency. Engineered chip control for stable machining Equipped with the MM5 chipbreaker, the insert promotes steady, compact chips even in difficult-to-machine grades. Stable chips reduce the risk of entanglement and help maintain machine uptime, which is especially important in automated turning operations. The chipbreaker geometry is matched to the rhombic platform and the 0° rake (negative) setting to encourage controlled shear and avoid erratic cutting forces, thereby supporting predictable cycle times and improved surface integrity on each workpiece. Geometry and edge preparation for versatile usage The rhombic 55° form and 0.8 mm corner radius provide a versatile cutting edge suitable for both light finishing cuts and moderate profiling tasks. The negative rake angle contributes to a robust cutting edge that resists chipping during interrupted cuts or when handling tougher stainless steel alloys. Because of that robust edge preparation and the insert’s balanced geometry, this grade is appropriate for shops seeking reliable repeatability across small-batch and series production, delivering consistent surface quality with minimal adjustment of cutting parameters. Contact Metav Werkzeuge today for application advice, availability and to discuss how Walter Tools inserts can improve machining of stainless steel components Technical data Article number: DNMG150608-MM5-WMP20G-WALTER SKU: DNMG150608-MM5-WMP20G-WALTER Product type: indexable turning insert / turning plate Manufacturer: Walter Tools Facts Geometry: Rhombus 55° Corner radius: 0.8 mm Rake angle: 0° (negative) Plate size: 15 (designation) Thickness code: 06 Special features Coating: Tiger·tec Gold Grade: WMP20G Chipbreaker: MM5 Substrate: coated carbide Application group: stainless steel (ISO M) Series: Tiger-tec Gold Brand: Walter Tools FAQ What workpiece materials suit this insert best? The DNMG150608-MM5 WMP20G insert is specifically designed for stainless steel (ISO group M), providing stable chip formation and wear resistance under the tougher cutting conditions these alloys present. How does the MM5 chipbreaker affect machining? The MM5 chipbreaker promotes compact, controllable chips and consistent cutting forces, which improves surface finish and reduces the likelihood of chip-related interruptions when machining stainless steels. Is the negative 0° rake suitable for interrupted cuts? Yes. The 0° (negative) rake produces a stronger cutting edge that resists chipping in interrupted or unstable cuts, making the insert suitable for mixed turning tasks in production environments. Can the insert be used for both finishing and profiling? The rhombic 55° geometry combined with a 0.8 mm radius allows flexible use from light finishing to moderate profiling, offering a compromise between sharpness and edge robustness. Which series and grade does this insert belong to? This insert is part of the Tiger-tec Gold series and uses the WMP20G grade, developed for reliable performance on stainless steel with good edge stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names remain the property of their respective owners. The mentioned brand Walter Tools is referenced for descriptive purposes only; there is no affiliation implied between our company and the trademark owners. The offered article is an original, factory-new product of the manufacturer.
DNMG150608-MM5 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of robust cutting performance and reliable chip control to maintain consistent throughput when machining stainless steels. The insert’s Tiger·tec Silver grade and MM5 chipbreaker deliver stable edges and extended tool life for medium to heavy-duty turning. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. DNMG150608-MM5 WMP20S turning insert — Tiger·tec Silver grade for stainless steel, negative 0° rake The DNMG150608-MM5 WMP20S is a rhombic 55° indexable turning insert designed for dependable stainless-steel machining under medium to robust conditions Tiger·tec Silver grade for stainless steel MM5 chipbreaker for stable chips Rhombic 55° geometry for versatile turning Negative 0° rake for strong cutting edge High-performance coating and substrate for tough materials The insert features the Tiger·tec Silver specification and the WMP20S cutting grade, a coated carbide combination optimised for machining stainless steel. This construction supports secure chip formation and reduces the tendency to build up on the cutting edge — a common challenge with austenitic stainless grades. The coating enhances thermal stability and wear resistance, which translates into fewer interruptions for tool changes and more predictable cycle times. The technical choice of substrate and coating therefore underpins measurable process reliability during extended production runs. Geometry and chip control that improve productivity With a rhombic 55° shape, a 0.8 mm corner radius and an MM5 chipbreaker, the insert is engineered for a balance between surface finish and edge robustness. The negative 0° rake delivers a stronger cutting edge, making the insert suitable for heavier depths of cut and interrupted turning without sacrificing edge life. The MM5 chipbreaker promotes short, controlled chips when cutting stainless steel, helping to prevent entanglement and minimising downtime due to chip clearing. These features together reduce scrap rates and support a more economical machining process. Application fit and handling guidance for workshop use This indexable insert fits standard DNMG toolholders and is intended for general turning of stainless steels in medium to robust operating conditions. The 0.8 mm corner radius helps achieve a consistent surface finish while retaining a durable edge for longer tool life. For best results, pair the insert with stable clamping and appropriate coolant strategies to manage heat when machining heat-resistant stainless grades. The combination of design and grade makes the insert a reliable choice for batch production environments where repeatability and tool-change efficiency are priorities. Contact Metav Werkzeuge today for a tailored machining recommendation or to discuss batch supply of Walter Tools inserts; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: DNMG150608-MM5-WMP20S-WALTER Designation: DNMG150608-MM5 WMP20S Type: Drehwendeschneidplatte / turning indexable insert Brand: Walter Tools Facts Geometry: Rhombic 55° Rake angle: 0° (negative) Corner radius: 0.8 mm Insert size: 15 Thickness designation: 06 Chipbreaker: MM5 Special features Series: Tiger·tec Silver Grade: WMP20S (coated carbide) Application: stainless steel machining (M) Performing well in medium to robust conditions FAQ What materials is this insert suitable for? The DNMG150608-MM5 WMP20S from Walter Tools is specified for stainless steel (ISO group M) and supports machining under medium to robust cutting conditions. How does the MM5 chipbreaker affect chip control? The MM5 chipbreaker produces short, controlled chips when paired with the Tiger·tec Silver grade, improving chip evacuation and reducing the risk of built-up edge in stainless-steel turning. Is the insert compatible with standard DNMG toolholders? Yes, the insert uses the DNMG form factor and is compatible with conventional DNMG toolholders used for turning operations. What advantage does the negative 0° rake offer? A negative 0° rake provides a stronger cutting edge that resists chipping during interrupted cuts and heavier depths of cut, enhancing tool life in demanding operations. Can this insert be used for finishing and roughing? The insert’s geometry and 0.8 mm corner radius make it suitable for both finishing and robust turning applications; process parameters will define the final surface quality and productivity. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (marketed as Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking; it operates as part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used here for explanatory purposes only and indicate that the offered item is original and factory-new from the manufacturer.
DNMG150608-MM5 WMP30G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance from the Tiger‑tec Gold grade and the proven MM5 chipbreaker for reliable chip control when machining stainless steel; this results in fewer interruptions and consistent component quality. Order the insert directly via Metav Werkzeuge or consult the team for process-specific recommendations. DNMG150608‑MM5 WMP30G indexable turning insert — Tiger‑tec Gold grade, MM5 chipbreaker (Walter Tools) The DNMG150608‑MM5 WMP30G is a rhombic 55° indexable turning insert designed for medium to robust machining of stainless steel, combining a coated carbide grade and an optimised chip geometry for stable production. Tiger‑tec Gold coating for extended tool life Optimised chipbreaker MM5 for reliable chip control Rhombic 55° form, 0.8 mm corner radius Suitable for stainless steel (ISO M) Increased process reliability for stainless steel components The combination of the Tiger‑tec Gold coating and the WMP30G grade improves wear resistance and thermal stability, which directly benefits cutting continuity when working with stainless steel. Coated carbide reduces the risk of rapid flank wear and supports a stable cutting edge under the higher temperatures and stickiness typical of these materials. With the MM5 chipbreaker, chip formation is guided and predictable, reducing the need for frequent operator intervention and lowering the risk of built‑up edge. This results in a measurable improvement in cycle time consistency and fewer unscheduled tool indexings. Better tool economy through fewer interruptions and longer edge life A coated grade developed for tougher conditions translates into fewer insert changes and reduced downtime. The combination of the grade’s coating technology and a controlled chipbreaker means the cutting edge maintains geometry longer, which is reflected in improved part quality and lower tool consumption per part. The DNMG geometry with a 0.8 mm corner radius supports robust depth‑of‑cut choices while preserving surface finish in finishing passes. For production environments aiming to balance productivity with consistent component tolerances, this insert offers a dependable compromise between performance and economy. Practical application guidance and compatibility The negative rake (0°) design and rhombic 55° form make the insert suitable for a range of turning operations on stainless steel from light profiling to heavier roughing cuts when paired with appropriate tool holders. The designation DNMG150608‑MM5 WMP30G follows common ISO conventions and is compatible with standard DNMG toolholders, enabling easy integration into existing tool sets. The MM5 chipformer is optimised to promote short to medium chips under typical cutting parameters for stainless steel; operators should select cutting conditions that favour continuous chip evacuation and avoid long, stringy chips. For detailed feed and speed recommendations, reference machine and process documentation or consult the supplier for tailored settings. Contact Metav Werkzeuge for application‑specific advice and fast supply of Walter Tools inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: DNMG150608-MM5-WMP30G-WALTER Designation: DNMG150608-MM5 WMP30G Manufacturer: Walter Tools Series: Tiger‑tec Gold Core specifications Size: 15 Thickness: 06 Corner radius: 0.8 Relief angle: 0° (negative) Features Grade: WMP30G Chipbreaker: MM5 Geometry: Rhombic 55° Material application: stainless steel (ISO M) Tolerance class: M Execution: G ISO designation: DNMG150608‑MM5 WMP30G FAQ Is this insert suitable for machining austenitic stainless steel? Yes. The DNMG150608‑MM5 WMP30G from Walter Tools is specified for stainless steel (ISO M) and is engineered to promote secure chip formation and a stable cutting edge in those materials. What benefits does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WMP30G grade increases wear resistance and thermal stability, which helps the insert retain its edge longer during continuous turning of stainless steel. Which chip form can be expected with the MM5 chipbreaker? The MM5 chipbreaker is optimised for short to medium chips under typical turning conditions, improving chip control and reducing the likelihood of entanglement in automatic production. Can the insert be used in standard DNMG holders? Yes. The ISO designation DNMG150608‑MM5 WMP30G indicates compatibility with standard DNMG toolholders; proper clamping and seat condition should be verified before machining. What does the 0.8 corner radius mean for process selection? A 0.8 mm corner radius increases edge robustness and allows slightly more aggressive depth‑of‑cut choices while still achieving a good surface finish in semi‑finishing and finishing operations. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Where applicable, the brand name Walter Tools has been used for identification and reference; the offered article is an original, brand‑new product from the manufacturer. There is no affiliation between our company and the named trademark owners.
DNMG150608-MM5 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the proven combination of the WSM10S cutting grade and the MM5 chipbreaker for secure chip control and consistent edge life in demanding machining tasks; ordered stock is available via Metav Werkzeuge or guidance can be requested from the consultants. DNMG150608-MM5 WSM10S indexable turning insert – Tiger·tec Silver, MM5 chipbreaker (Walter Tools) The DNMG150608-MM5 WSM10S is a coated indexable turning insert designed for robust machining of stainless steels and heat-resistant alloys, offering high edge stability and reliable chip evacuation. Tiger·tec Silver coating for long life Suitable for stainless steels and superalloys Rhombic 55° geometry for stable engagement MM5 chipbreaker for controlled chips Optimised grade for hard-to-machine materials The WSM10S grade, part of the Tiger·tec Silver series, is a coated carbide engineered for tough, heat-generating workpieces. The grade supports secure chip formation and protects the cutting edge during high thermal stress, which directly benefits machining of stainless steels and superalloys. This results in a more stable process window and fewer unexpected interruptions — a decisive efficiency advantage in series production. The insert’s design reduces tendencies for build-up on the edge and contributes to consistent surface quality on finished components. Precision geometry for dependable cycle times A rhombic 55° insert shape combined with a 0° negative rake provides reliable tool engagement and predictable force distribution during turning. The MM5 chipbreaker is tailored to break and evacuate chips effectively under the thermal loads typical for M and S materials, improving surface finish and minimising downtime for chip management. The 0.8 mm corner radius balances strength and finish capability, making the insert suitable for moderate finishing and general turning tasks where edge robustness is required. Production-oriented design and handling The insert designation DNMG150608-MM5 denotes a standard format that integrates easily into conventional toolholders while offering repeatable positioning thanks to tolerance class M. The plate thickness and compact geometry support stable clamping and help maintain repeatable results across index changes, which reduces rework and tool change frequency. As an indexable insert, it allows fast replacement of worn edges rather than full tool regrind, contributing to lower overall tooling costs and higher machine uptime. Application fit and process guidance Intended primarily for machining stainless steels (ISO group M) and for heat-resistant superalloys and titanium-based materials (ISO group S), the insert should be matched to cutting parameters and holder geometry for optimal performance. The WSM10S grade is versatile across a broad material spectrum but shows its strengths where thermal resistance and edge security are decisive. For production planning, pairing the insert with suitable coolant strategies and stable clamping enhances process reliability and extends tool life, supporting both quality and throughput objectives. For specific cutting-data recommendations or verification against component requirements, Metav Werkzeuge can provide tailored advice and application support. Contact Metav Werkzeuge for application-specific recommendations, availability of genuine Walter Tools DNMG150608-MM5 WSM10S inserts, and to discuss the best process parameters for stainless steels and superalloys via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DNMG150608-MM5-WSM10S-WALTER ISO designation: DNMG150608-MM5 WSM10S Series: Tiger·tec Silver Grade: WSM10S Facts Geometry: Rhombus 55° Corner radius: 0.8 mm Free cutting angle: 0° negative Chipbreaker: MM5 Plate size: 15 Plate thickness: 06 Tolerance class: M Execution: G Special features Coating: Tiger·tec Silver (coated carbide) Material applicability: Stainless steels (M), Superalloys/Titanium (S) Application: Turning/indexable insert for demanding materials Design benefit: Stable chip control and edge life FAQ What materials is this insert suitable for? The DNMG150608-MM5 WSM10S insert by Walter Tools is specified for stainless steels (ISO group M) and heat-resistant superalloys or titanium alloys (ISO group S), offering strong performance where thermal resistance and edge stability are required. How does the MM5 chipbreaker affect machining? The MM5 chipbreaker promotes controlled chip segmentation and evacuation under the high temperatures typical of M and S materials, improving surface finish and reducing the risk of chip-related interruptions. What does the 0° negative rake mean for cutting? A 0° negative rake provides robust tool engagement and increased edge strength, which supports consistent cutting performance on tougher materials and reduces edge wear during interrupted cuts. Is this insert compatible with standard DNMG toolholders? Yes, the insert follows the DNMG150608 format and fits standard holders designed for DNMG inserts, enabling straightforward integration into existing tool systems. How does the Tiger·tec Silver series improve productivity? The Tiger·tec Silver coating enhances thermal resistance and wear protection, which extends edge life and contributes to more consistent production rates and reduced tool-change frequency. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Walter Tools is part of a global group known for precision cutting solutions and consistent tool performance. Protected trademarks and trade names are the property of their respective owners and are mentioned only for explanation. There is no affiliation between our company and the mentioned brands; the offered article is an original, factory-new product of the manufacturer.
DNMG150608-MM5 WSM20S WSM20S Wendeplatten - Walter Tools
Die Kombination aus Tiger·tec Silver‑Beschichtung, WSM20S‑Schneidstoff und dem MM5‑Spanformer sorgt für stabile Spanbildung und längere Standzeiten bei der Bearbeitung von rostfreiem Stahl und hitzebeständigen Legierungen; bestellen über Metav Werkzeuge oder die Beratung in Anspruch nehmen. DNMG150608-MM5 WSM20S indexable turning insert — Tiger·tec Silver, for rostfreier Stahl and superalloys (Walter Tools) DNMG150608-MM5 WSM20S is an indexable turning insert engineered for secure chip control and repeatable performance when machining rostfreier Stahl and heat‑resistant superalloys. Tiger·tec Silver coated grade WSM20S Optimised MM5 chipbreaker for stable chips Rhombic 55° geometry, 0.8 mm corner radius 0° negative relief for tough materials Greater throughput through coating and grade optimisation The combination of the Tiger·tec Silver coating and the WSM20S grade provides a balanced wear resistance and thermal stability that increases machining efficiency for demanding materials. As a coated carbide solution, the insert supports higher cutting parameters compared with uncoated grades while maintaining edge integrity. This translates into fewer indexings, reduced tool change times and a more predictable production flow when processing rostfreier Stahl or parts from the S‑group of ISO 513. Consistent surface quality and controlled chip formation The integrated MM5 chipbreaker, paired with the Rhombic 55° form and a 0.8 mm corner radius, delivers controlled chip segmentation and a reliable cutting edge under heavy thermal load. The 0° (negative) relief promotes robustness on interrupted cuts and tough workpieces, improving edge life and surface finish with less variation. For process planners this means repeatable component quality and lower scrap rates in serial turning operations. Versatile application range with predictable tool life Designed for the M and S material groups, the insert performs across rostfreier Stahl and heat‑resistant superalloys, including applications that demand heat resistance and strong edge stability. The geometry supports common turning toolholders and is suitable for finishing and medium turning where stable chip evacuation is required. For production environments seeking a balance of performance and cost‑efficiency, the insert offers repeatable results and easy inventory management thanks to its standard ISO designation. Consult Metav Werkzeuge for tailored cutting recommendations and availability of Walter Tools DNMG150608‑MM5 WSM20S inserts; reach Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for application support and ordering. Technical Data Article number: DNMG150608-MM5-WSM20S-WALTER Manufacturer: Walter Tools Product type: Indexable turning insert Core data Inscribed circle: 15 Thickness: 06 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Design & features Grade: WSM20S Series: Tiger·tec Silver Chipbreaker: MM5 Shape: Rhombic 55° Material designation: S / M Applicable materials: rostfreier Stahl; heat‑resistant superalloys and titanium FAQ What materials is this insert suitable for? The DNMG150608‑MM5 WSM20S insert is intended for rostfreier Stahl and the S group (heat‑resistant superalloys and titanium), with the grade chosen for thermal stability and stable chip formation. How does the MM5 chipbreaker affect machining? The MM5 chipbreaker on this Walter Tools insert promotes controlled chip segmentation and evacuation, improving surface finish and protecting the cutting edge under elevated temperatures. Which geometry advantages does the Rhombic 55° offer? Rhombic 55° geometry provides accessibility in general turning operations and combines favourable cutting angles with the 0.8 mm corner radius for improved edge strength and consistent results. Is the insert suitable for interrupted cuts and heavy feeds? The negative 0° relief and robust grade of the insert increase resistance to edge breakage on interrupted cuts and when machining tough workpiece materials. Can this insert be used in standard toolholders? Yes, the ISO‑designated DNMG profile fits common turning toolholders designed for DNMG inserts, enabling straightforward integration into existing tool systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150608-MM5 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of the combination of a wear-resistant Tiger·tec Silver grade, optimised Rhombic 55° geometry and reliable chip control for consistent turning performance when machining stainless steels and heat‑resistant alloys; order directly from Metav Werkzeuge or request application advice from our consultants. DNMG150608-MM5 WSM30S indexable turning insert — Tiger·tec Silver, MM5 chipbreaker — Walter Tools The DNMG150608-MM5 WSM30S is an indexable turning insert engineered for stable machining of stainless steels and heat‑resistant alloys, offering a combination of coated carbide toughness and a chipbreaker designed for secure swarf control. Tiger·tec Silver coated carbide grade WSM30S Suited to stainless steels and superalloys Rhombic 55° geometry, 0.8 mm corner radius MM5 chipbreaker for consistent chip control Consistent edge life through advanced coating technology The core advantage of the WSM30S grade lies in the Tiger·tec Silver coating, a multi‑layer solution that balances thermal resistance and toughness. This coated carbide grade supports secure chip formation under the high temperatures typical when cutting stainless steels and superalloys, reducing the frequency of tool changes and contributing to a more predictable production rhythm. For shops seeking to improve throughput, the harder wearing surface lowers flank wear and helps maintain dimensional accuracy over longer tool life cycles. Geometry crafted for reliable surface finish and tool stability The Rhombic 55° form and 0.8 mm corner radius combine to deliver a dependable cutting edge geometry that is particularly effective in medium to heavy turning operations where edge strength matters. The 0° negative rake promotes a robust cutting geometry for interrupted or unstable cuts, while the MM5 chipbreaker channels chips reliably to avoid entanglement and minimise secondary operations. These design elements together support a fine surface finish without sacrificing process security. Predictable machining parameters for production environments With tolerance class M and a standard DNMG ISO designation, the insert is made to fit common tool holders and repeatable clamping systems, helping reduce setup variability. The coated carbide substrate is formulated to resist thermal softening and chipping, which translates into fewer unscheduled stops and a lower scrap rate. For contract manufacturers and CNC turning centres, this means enhanced machine utilisation and a measurable reduction in non‑productive time. Clear guidance on applications and machining scope This indexable turning insert is intended primarily for group M (stainless steels) and group S (heat‑resistant superalloys and titanium) according to ISO conventions. The combination of a thermally resistant coating and a geometry optimised for chip control makes it suitable for demanding materials that tend to work‑harden or generate high cutting temperatures. Selection of cutting parameters should reflect the workpiece alloy and hardness; the insert’s design focuses on controlled chip formation and edge stability rather than extreme high‑speed finishing. Contact Metav Werkzeuge for tailored machining recommendations for the Walter Tools DNMG150608-MM5 WSM30S insert and arrange specific application support via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: DNMG150608-MM5-WSM30S-WALTER ISO designation: DNMG150608‑MM5 WSM30S Series: Tiger·tec Silver Grade: WSM30S Manufacturer: Walter Tools Facts Geometry: Rhombic 55° Corner radius: 0.8 mm Free rake angle: 0° negative Chipbreaker: MM5 Plate size code: 15 Plate thickness: 06 Tolerance class: M Special features Coated carbide grade Tiger·tec Silver Optimised for stainless steels (M) and superalloys/titanium (S) Designed for stable chip formation and edge control ISO DNMG indexable turning insert format FAQ What materials is this insert designed for? The DNMG150608‑MM5 WSM30S insert is formulated for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), taking advantage of the Tiger·tec Silver coating to manage heat and edge wear. How does the MM5 chipbreaker affect machining? The MM5 chipbreaker on the Walter Tools insert promotes controlled chip formation, which reduces the risk of chip entanglement and improves process reliability during continuous and moderately interrupted turning. Is the geometry suitable for interrupted cuts? Yes. The Rhombic 55° form combined with a 0° negative rake and a 0.8 mm corner radius provides enhanced edge strength, making the insert appropriate for many interrupted and heavy‑duty turning applications. Can this insert deliver a good surface finish? When used with appropriate cutting parameters for stainless steels or superalloys, the insert’s geometry and chip control contribute to a consistent surface finish while prioritising edge stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected terms are used solely for explanation and identification; there is no affiliation between our company and the named manufacturers. The offered item is an original, factory‑new product from the manufacturer.
DNMG150608-MP3 WPP05G WPP05G Wendeplatten - Walter Tools
The combination of a Tiger·tec Gold wear-resistant grade and the MP3 chipbreaker delivers consistent edge life and reliable chip control for steel machining; order the insert via Metav Werkzeuge or consult our team for application advice. DNMG150608-MP3 WPP05G indexable turning insert – Tiger·tec Gold, for steel, Walter Tools The DNMG150608-MP3 WPP05G is a rhombic 55° indexable insert designed for robust turning of steel components, offering a wear-resistant coating and a chipbreaker tuned to typical steel chip formation. Tiger·tec Gold coated carbide for high wear resistance MP3 chipbreaker optimised for steel machining Rhombic 55° form with 0.8 mm corner radius Negative 0° rake for robust cutting Consistent cutting performance through advanced grade technology The combination of the WPP05G grade and Tiger·tec Gold coating delivers a balance of wear resistance and toughness that sustains cutting edge life in demanding steel applications. Because the grade is tuned for the thermal and mechanical conditions of steel turning, the insert maintains its geometry under repeated loads, reducing frequency of index changes and tool handling. This results in improved process stability and fewer unplanned interruptions, which supports efficient shift planning and predictable batch output. The engineered coating also aids in resisting built-up edge, translating into steadier surface finish and repeatable dimensional results. Stable chip control and secure geometry for reliable surface quality Featuring the MP3 chipbreaker and a rhombic 55° shape with a 0.8 mm corner radius, the design focuses on controlled chip formation and clearance. The chip geometry promotes short, segmented chips during typical steel cutting regimes, reducing risk of entanglement and facilitating safe evacuation from the cut. The negative 0° rake provides a more robust cutting edge under interrupted cuts or heavy engagement, protecting the edge against chipping. Together these elements help to achieve consistent surface integrity and reduce secondary processing, which benefits throughput and downstream handling. Practical advantages for productive turning operations With the DNMG form factor and standard dimensions, the insert integrates into common toolholders, enabling quick indexability and minimal setup time. The plate thickness and stable tolerance class contribute to secure clamping and repeatable tool offsets. For production environments focused on repeatability, the combination of grade, chipbreaker and geometry reduces the variation between inserts and supports longer, more productive tool life. This makes the insert a pragmatic choice for workshops seeking to balance performance with predictable maintenance cycles. Contact Metav Werkzeuge for availability of Walter Tools DNMG150608-MP3 WPP05G inserts and tailored application support based on the Tiger·tec Gold grade Technical data SKU: DNMG150608-MP3-WPP05G-WALTER Name: DNMG150608-MP3 WPP05G Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Core specifications Shape: Rhombus 55° Corner radius: 0.8 mm Rake angle: 0° (negative) Size: 15 Thickness: 06 Tolerance class: M Features & suitability Grade: WPP05G (Tiger·tec Gold) Chipbreaker: MP3 Series: Tiger-tec Gold Material group: P (steel) Suitability: steel machining Execution: G FAQ What materials is this insert suitable for? The DNMG150608-MP3 WPP05G insert from Walter Tools is designed for the ISO material group P and is therefore suitable for machining various steels. How does the MP3 chipbreaker affect machining of steel? The MP3 chipbreaker on the WPP05G grade promotes controlled chip segmentation during steel turning, improving chip evacuation and reducing the risk of surface damage. What is the advantage of the Tiger·tec Gold coating? Tiger·tec Gold provides enhanced wear resistance and thermal stability for the DNMG150608-MP3 WPP05G, which helps to extend cutting edge life in production turning tasks. Can this insert handle interrupted cuts? Yes, the rhombic 55° geometry combined with a negative 0° rake offers a robust cutting edge that is more resistant to chipping during interrupted or heavy cuts. Is the insert compatible with standard DNMG toolholders? The DNMG form factor is a standard indexable insert size and is compatible with conventional DNMG toolholders that accept rhombic 55° inserts. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
DNMG150608-MP3 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Gold coating and the WPP10G grade combined with a 0.8 mm corner radius and a robust MP3 chipbreaker for reliable chip control and extended edge life. Order the DNMG150608-MP3 WPP10G directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. DNMG150608-MP3 WPP10G — indexable turning insert, Tiger‑tec Gold grade for steel | Walter Tools The DNMG150608-MP3 WPP10G is a rhombic 55° indexable turning insert with a 0° negative rake, designed for productive machining of steel. Tiger‑tec Gold coating for extended tool life WPP10G grade optimised for steel machining MP3 chipbreaker for consistent chip control Rhombus 55° form with 0.8 mm corner radius Boosted productivity through coating and grade The insert’s Tiger‑tec Gold coating and WPP10G grade deliver a balance between wear resistance and toughness, enabling longer tool life under typical steel cutting conditions. This combination reduces the frequency of tool changes, which in turn maintains machine uptime and smooth production flow. The design is particularly effective where stable cutting edge performance and repeatable results are required in medium to high-volume turning operations. Predictable chip control and edge stability Equipped with the MP3 chipbreaker and a 0.8 mm corner radius, the geometry supports controlled fragmentation of swarf and reduces the risk of built-up edge. The 0° negative rake increases insert strength for interrupted cuts and tougher workpiece conditions, while the Rhombus 55° profile provides a secure clamping seat and good access to shoulder and profile details. Together these features help achieve consistent surface finish and dimensional stability. Specifically tuned for steel applications Classified for the P group, this coated carbide insert is tailored to the thermal and chip-formation characteristics of steel, including alloyed and unalloyed types. The grade composition and coating technology are designed to manage heat and abrasion typical of steel cutting, which translates into predictable tool life and process reliability. For engineers specifying cutting data, the insert supports stable feeds and speeds within the manufacturer’s recommended ranges for steel. Practical handling and process integration The insert carries a tolerance class M and the familiar DNMG ISO form, simplifying toolholder selection and inventory management. The plate thickness code and standard geometry ensure compatibility with existing indexable tool systems, reducing setup effort. For operations seeking a cost-effective route to improved machining consistency, the combination of grade, coating and chipbreaker offers an attractive return through fewer tool changes and lower scrap risk. For application advice on Walter Tools Tiger‑tec Gold inserts or to discuss optimal cutting data for steel, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for a tailored recommendation. Technical data SKU: DNMG150608-MP3-WPP10G-WALTER Designation: DNMG150608-MP3 WPP10G Product type: indexable turning insert Facts Corner radius: 0.8 mm Plate size: 15 mm Thickness code: 06 Clearance angle: 0° (negative) Tolerance class: M Special features Coating technology: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: MP3 Plate form: Rhombus 55° Material application: steel (P) FAQ What materials is this insert suited for? The DNMG150608-MP3 WPP10G is designed primarily for steel (P group) machining and performs best on unalloyed and alloyed steels where the Tiger‑tec Gold coating manages heat and wear. How does the MP3 chipbreaker affect performance? The MP3 chipbreaker on this Walter Tools insert promotes consistent chip formation and evacuation, which helps maintain a reliable cutting edge and improves surface quality during turning. Is the 0° negative rake suitable for interrupted cuts? Yes, the 0° negative rake increases the insert’s edge strength, making it well suited to interrupted cuts and tougher cutting conditions where edge robustness is essential. Can this insert be used in standard DNMG toolholders? The DNMG shape and tolerance class M mean the insert is compatible with standard DNMG toolholders, facilitating straightforward integration into existing toolsets. What benefits does Tiger‑tec Gold bring to production? Tiger‑tec Gold coating enhances wear resistance while retaining sufficient toughness, resulting in longer tool life, fewer tool changes and more consistent process outcomes in steel turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for clarification only. There is no connection between our company and the brands named. The offered item is an original, factory‑new product from the manufacturer, Walter Tools.
DNMG150608-MP3 WPP20G WPP20G Wendeplatten - Walter Tools
Die Kombination aus hoher Verschleißfestigkeit und sicherer Spanformung sorgt für konstante Prozesse und niedrige Bauteilkosten. Dank der beschichteten Hartmetall-Sorte WPP20G und der Tiger·tec Gold-Technologie werden längere Standzeiten und sichere Zerspanungsbedingungen erzielt. Bestellungen oder technische Rückfragen können direkt über Metav Werkzeuge erfolgen; bei Bedarf stehen die Beratungsteams zur Verfügung. DNMG150608-MP3 WPP20G Drehwendeschneidplatte, Tiger·tec Gold, MP3 Chipbreaker — Walter Tools The DNMG150608-MP3 WPP20G is a negative‑rake turning insert designed for general steel turning applications, combining a Tiger·tec Gold coated carbide grade with an MP3 chipbreaker for reliable material removal. Tiger·tec Gold coating for high wear resistance MP3 chipbreaker for reliable chip control Rhombus 55° geometry for versatile turning 0.8 mm corner radius for robust edge strength High productivity through coated‑carbide performance The combination of a coated carbide grade and the Tiger·tec Gold surface treatment provides a measurable increase in process stability when machining Stahl. The coating reduces adhesive wear and improves thermal resistance, which results in more consistent cutting conditions and longer tool life. The MP3 chipbreaker is engineered to form short, controllable chips under typical turning feeds, lowering downtime caused by chip entanglement and promoting uninterrupted production. These technical choices translate directly into cost efficiency per workpiece and fewer tool changes during production shifts. Consistent surface finish and secure chip management Geometry and chip control are decisive for surface quality; the rhombic 55° shape combined with a 0.8 mm corner radius produces a robust cutting edge that resists chipping during interrupted cuts. The insert’s negative 0° clearance angle supports stable engagement in heavy cuts while the MP3 chipbreaker promotes predictable chip flow. As a consequence, finishing passes can be reduced and reproducible component tolerances are easier to maintain, supporting higher first‑time yield and improved overall equipment effectiveness. Practical selection and application guidance for workshop use The insert’s specification and the WPP20G grade make it suitable primarily for machining Stahl, covering a broad hardness and alloy range typical in industrial production. The DNMG 15‑06 geometry fits standard toolholders and offers a balance between cutting edge strength and accessibility in shoulder and profile turning. When selecting cutting parameters, operators benefit from the coating’s thermal resilience by using moderately increased cutting speeds where machine and workpiece rigidity allow, while feed and depth of cut should be adapted for optimal chip formation with the MP3 breaker. This approach secures efficient material removal and extends intervals between tool changes. For tailored application support or to discuss lot availability of Walter Tools inserts, contact Metav Werkzeuge — the technical advisors are available to recommend the optimal insert selection and tolerances for specific machining tasks. Technical Data Article number: DNMG150608-MP3-WPP20G-WALTER Designation: DNMG150608-MP3 WPP20G Product type: Turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Facts Inscribed circle / size: 15 mm Thickness: 6 mm Cutting edge radius: 0.8 mm Clearance angle: 0° (negative) Tolerance class: M Special features Coating / series: Tiger·tec Gold Grade: WPP20G Chipbreaker: MP3 Shape: Rhombus 55° Application: Stahl FAQ What materials is this insert suited for? The DNMG150608-MP3 WPP20G is optimised for machining Stahl and is designed to handle the typical heat and chip formation encountered when turning various steel grades. Which chip behaviour can be expected with the MP3 breaker? The MP3 chipbreaker on the WPP20G grade produces short, controllable chips across a wide range of feeds, improving process security and reducing chip management issues. How does the Tiger·tec Gold coating benefit production runs? Tiger·tec Gold increases thermal resistance and wear protection, which extends insert life and supports more consistent cutting performance over long runs. Is the DNMG15 format compatible with standard tool holders? The DNMG 15 format is a common inscribed circle size that fits standard turning toolholders; the 6 mm thickness and rhombic geometry are suitable for typical industrial holders. Walter Tools: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150608-MP3 WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the MP3 chipbreaker for longer tool life and predictable chip control when machining steel; the rhombic 55° geometry provides versatile engagement and consistent surface finishes. Order the insert directly via Metav Werkzeuge or request application advice from the sales engineers. DNMG150608-MP3 WPP30G — Indexable turning insert, Tiger·tec Gold, MP3 (Walter Tools) DNMG150608-MP3 WPP30G is a rhombic 55° indexable insert engineered for reliable steel turning operations with a Tiger·tec Gold coated grade and MP3 chipbreaker for controlled chip formation Tiger·tec Gold coated grade WPP30G MP3 chipbreaker for consistent chips Rhombus 55° geometry for versatile use 0,8 mm corner radius for stable cutting Longer tool life through advanced coating and substrate The combination of the Tiger·tec Gold coating and a coated carbide substrate is designed to extend tool life under the thermal and mechanical demands of steel machining. The wear-resistant grade WPP30G is optimised for common steel applications (ISO group P), providing a balance between wear performance and toughness. As a result, downtime for insert changes is reduced and tool-change frequency is lowered, which supports a more efficient production rhythm and predictable process costs. Reliable chip control and process stability The integrated MP3 chipbreaker is tailored for secure chip formation when turning steel, promoting short, controllable chips across a range of cutting conditions. The insert’s 0° negative rake produces a robust cutting edge, improving vibration resistance during interrupted cuts and heavy roughing. Together, the chipbreaker and negative geometry enhance process security, minimise the risk of built-up edge and help maintain dimensional consistency across longer runs. Geometry tuned for consistent surface quality With a rhombic 55° shape and a 0,8 mm corner radius, the insert offers a favourable compromise between strength and versatility; the acute approach angle supports both facing and light turning with improved access to tighter profiles. The tolerance class M ensures repeatable seating and alignment in standard toolholders, enabling reproducible surface finishes and easier setup verification in series production. Integration into production and economical performance The indexable design and the compact specification (designation DNMG150608-MP3 WPP30G) make the insert straightforward to incorporate into established turning tool systems; holders for DNMG-style inserts are widely available. Because the grade is aimed at steel (material group P), cutting data can be set conservatively to exploit the coating’s wear resistance while maintaining component integrity. This focus on predictable wear and chip behaviour translates into stable cycle times and measurable productivity gains on the shop floor. Contact Metav Werkzeuge for tailored application advice and availability of Walter Tools Tiger·tec Gold inserts – local support and rapid delivery options are available through Metav Werkzeuge. Technical data Article number: DNMG150608-MP3-WPP30G-WALTER Designation: DNMG150608-MP3 WPP30G Brand: Walter Tools Series: Tiger·tec Gold Grade: WPP30G Numbers / Core technical data Shape angle: Rhombus 55° Negative rake: 0° Corner radius: 0,8 mm Size: 15 Thickness: 06 Tolerance class: M Special features / Materials & functions Chipbreaker: MP3 Coated carbide (coating technology: Tiger·tec Gold) Material group: P (steel) Application: turning / indexable insert FAQ Which materials is this insert intended for? The DNMG150608-MP3 WPP30G insert is specified for ISO group P (steel) and is optimised for the typical heat and chip formation encountered when machining unalloyed and alloyed steels. How does the MP3 chipbreaker affect machining? The MP3 chipbreaker on the DNMG150608-MP3 WPP30G provides consistent chip segmentation and evacuation, reducing the likelihood of long, tangled chips and improving process stability during turning. Can this insert be used for finishing as well as roughing? Yes; the combination of 0,8 mm corner radius and the rhombic 55° geometry makes the insert suitable for both roughing and lighter finishing passes, with settings adjusted to the required surface quality. What is the benefit of the Tiger·tec Gold coating? The Tiger·tec Gold coating enhances wear resistance and temperature tolerance, which typically extends tool life and supports higher productivity when turning steel components. Is the insert compatible with standard DNMG holders? The DNMG150608-MP3 WPP30G follows the DNMG specification and is intended to be used in standard holders designed for DNMG inserts; correct clamping and seat cleanliness are recommended to ensure repeatable performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original brand-new goods of the manufacturer.
DNMG150608-MP5 WPP05G Wendeplatten - Walter Tools
Take advantage of high wear resistance, secure chip control and a robust negative-rake geometry for reliable turning of Stahl components; order directly via Metav Werkzeuge or contact the consultants for application advice. DNMG150608-MP5 WPP05G indexable turning insert — Tiger·tec Gold, for Stahl | Walter Tools The DNMG150608-MP5 WPP05G is a rhombic 55° indexable turning insert designed for efficient and reliable machining of Stahl components under a wide range of cutting conditions. Tiger·tec Gold coating for extended tool life MP5 chipbreaker for consistent chip control 0.8 mm corner radius for stable edge strength 0° negative rake for robust cutting performance Higher productivity through consistent cutting performance The Tiger·tec Gold coating combined with the WPP05G grade delivers a balanced performance that reduces wear and maintains a stable cutting edge over longer tool life. The coated cemented-carbide composition is engineered for the thermal and mechanical demands of Stahl machining, which means fewer insert changes and less interruption of production cycles. By choosing a coated grade optimised for common steels, shops benefit from predictable reconditioning intervals and improved process reliability. The technical design emphasises repeatability and consistent surface finish, which supports both batch production and diverse job shops. Reliable chip control and operational robustness The MP5 chipbreaker is tuned to produce controllable chip forms when turning typical Stahl grades, improving evacuation and reducing risk of entanglement. Combined with the 0° negative rake, the geometry provides increased edge strength and resistance to mechanical shock, making the insert well suited to interrupted cuts and heavy engagement scenarios. The 0.8 mm corner radius supports a durable cutting edge, spreading cutting forces and lowering the likelihood of premature chipping. This combination reduces machine downtime and contributes to a safer, more efficient process flow on conventional lathes and CNC turning centres. Practical application guidance for precision and economy The rhombic 55° shape enables versatile approach angles and accessibility in facing and general turning operations, while the plate size and thickness codes ensure compatibility with standard toolholders that accept DNMG-style inserts. For users transitioning from uncoated grades, the coated Tiger·tec Gold technology often permits slightly increased cutting speeds and feed rates without sacrificing tool life, improving throughput. When planning operations, pair the insert with appropriate clamping and coolant strategies to exploit consistent chip evacuation; this helps deliver repeatable surface quality and extends the useful life of cutting edges. For application advice or to check stock and delivery options for the Walter Tools DNMG150608-MP5 WPP05G indexable insert, contact Metav Werkzeuge for expert guidance and availability. Technical data SKU: DNMG150608-MP5-WPP05G-WALTER Designation: DNMG150608-MP5 WPP05G Type: Indexable turning insert (Drehwendeschneidplatte) Brand: Walter Tools Series: Tiger-tec Gold Facts Plate shape: Rhombus 55° Corner radius: 0.8 mm Free angle / rake: 0° (negative) Size code: 15 Thickness code: 06 Tolerance class: M Special features Grade: WPP05G Chipbreaker: MP5 Execution: G Material group suitability: Stahl (ISO P) Coating technology: Tiger·tec Gold ISO designation: DNMG150608-MP5 WPP05G FAQ Which materials is this insert intended for? The DNMG150608-MP5 WPP05G is designed primarily for machining Stahl and is rated according to the ISO P material group for turning operations. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP05G grade enhances wear resistance and thermal stability, offering longer cutting life and more consistent edge behaviour during extended runs. Is the insert suitable for interrupted cuts and heavy engagement? Yes, the combination of a 0° negative rake and a 0.8 mm corner radius gives the insert increased edge strength, making it well suited to interrupted cuts and heavier cutting conditions. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker is engineered to produce predictable chips when turning Stahl, improving chip evacuation and reducing the risk of chip-related interruptions during machining. What is the exact product designation and SKU for ordering? The product is sold as DNMG150608-MP5 WPP05G (indexable insert) and listed under SKU DNMG150608-MP5-WPP05G-WALTER. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used here for explanatory purposes only; there is no association between our company and these brands. The offered item is an original, factory-new product of the manufacturer.
DNMG150608-MP5 WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the MP5 chipbreaker and a 0.8 mm corner radius for stable, repeatable steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DNMG150608-MP5 WPP10G Drehwendeschneidplatte by Walter Tools – Tiger·tec Gold, MP5 chipbreaker The DNMG150608-MP5 WPP10G is an indexable turning insert designed for steel machining, offering a balanced mix of wear resistance and toughness for reliable production performance. Tiger·tec Gold coated for improved tool life MP5 chipbreaker for controlled chip formation Rhombus 55° geometry for versatile turning 0.8 mm corner radius for robust edge strength Consistent process performance for steel turning The DNMG150608-MP5 WPP10G combines the Tiger·tec Gold coating with the WPP10G grade to deliver improved wear resistance and consistent cutting-edge behaviour when machining steel (ISO P). The coated carbide design reduces flank wear and helps maintain dimensional stability over longer tool life, which in turn supports predictable cycle times and reduced tooling change frequency. The MP5 chipbreaker is engineered to promote short, uniform chips during common steel turning operations, improving swarf control and reducing the risk of surface damage. For production environments where stable performance and reproducible results matter, this insert supports efficient, cost-conscious machining. Geometry and edge design that simplify setup and enhance reliability The rhombic 55° shape provides versatility in approach angles and access to both external and light profile turning tasks. Key geometry parameters include the Rhombus 55° plate form, a size of 15, thickness code 06 and a 0.8 mm corner radius that delivers a stronger cutting edge for interrupted cuts and steady finishing passes. The specified free angle of 0° (negative) offers an edge geometry that increases robustness at the cutting edge and contributes to effective heat distribution during heavier cuts. These features together reduce the need for frequent parameter adjustments and simplify process setup, helping to keep downtime and scrap to a minimum. Productivity advantages and application guidance By pairing a modern coating system with a well‑balanced chipbreaker and a medium corner radius, this insert supports both productive roughing and controlled finishing in a variety of steel grades. The WPP10G grade is tailored for the typical heat and chip formation characteristics encountered in steel machining, offering a compromise between wear resistance and toughness that suits mixed production runs. In practice, this results in fewer insert changes, better surface quality and improved process security. For specific cutting data, recommended feeds and speeds can be provided by Metav Werkzeuge to match the machining centre and workpiece material, ensuring the full benefit of the tool is realised. For robust steel turning with the Tiger·tec Gold WPP10G grade, contact Metav Werkzeuge for tailored advice or to request the DNMG150608‑MP5 WPP10G from Walter Tools Technical data Article number: DNMG150608-MP5-WPP10G-WALTER Designation: DNMG150608-MP5 WPP10G Series: Tiger·tec Gold Grade: WPP10G Manufacturer: Walter Tools Facts Size: 15 Thickness code: 06 Corner radius: 0.8 mm Free angle: 0° (negative) Plate form: Rhombus 55° Special features Coating: Tiger·tec Gold Chipbreaker: MP5 Material application: Steel (ISO P) Sort: WPP10G (coated carbide) Tolerance class: M FAQ Is this insert suitable for machining steel? The DNMG150608‑MP5 WPP10G is optimised for steel (ISO P) applications; the WPP10G grade and Tiger·tec Gold coating address the thermal and chip‑formation characteristics typical of steel. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP10G grade improves wear resistance and thermal stability in turning operations, helping the insert to maintain cutting-edge integrity and prolong service life. Which operations suit the MP5 chipbreaker best? The MP5 chipbreaker is designed for controlled chip formation during general turning tasks; it performs well in both medium‑cut roughing and finishing where predictable swarf behaviour is required. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius offers a robust cutting edge for interrupted or heavier cuts while still allowing acceptable surface finish in many finishing passes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and indicate no affiliation between our company and the named manufacturers. The offered item is an original, factory‑new product of the manufacturer.
DNMG150608-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of high process security, optimised chip control and a wear‑resistant Tiger‑tec Gold grade for efficient steel turning; order the inserts directly via Metav Werkzeuge or consult our specialists for machining parameters. DNMG150608-MP5 WPP20G turning insert (Rhombic 55°, MP5) — Walter Tools The DNMG150608-MP5 WPP20G is a coated carbide turning insert designed for steel turning, featuring the Tiger‑tec Gold coating and an MP5 chipbreaker for stable chip formation and long tool life. Tiger·tec Gold coated carbide grade WPP20G MP5 chipbreaker for stable chip control Rhombic 55° geometry for versatile turning 0° negative rake for durable cutting edge Consistent performance for demanding steel turning The Tiger‑tec Gold grade WPP20G delivers a reliable balance between wear resistance and toughness for the machining of steel (material group P). The combination of a coated carbide substrate and a modern coating system reduces flank wear and extends tool life under typical turning temperatures. For production environments where cycle time and repeatability matter, this insert provides predictable tool behaviour, enabling tighter process windows and fewer unforeseen interruptions. The rhombic 55° geometry promotes a good compromise between cutting edge strength and the ability to perform both roughing and finishing passes, which helps to maintain component quality across batches. Stable chip control and edge security for smooth machining Equipped with the MP5 chipbreaker, the indexable insert produces short, controllable chips in a wide range of cutting conditions. The chipformer design reduces the risk of long, entangling swarf and improves evacuation when turning medium‑to‑heavy cross sections. The 0° negative rake and a corner radius of 0.8 mm contribute to a robust cutting edge that resists chipping under intermittent cuts or variable feed rates. These features together mean fewer tool changes and a more continuous production flow, particularly on medium‑duty lathes and multi‑tasking machines where operator oversight is limited. Practical compatibility and handling benefits for workshop use The insert follows the familiar DNMG format and the ISO designation DNMG150608‑MP5 WPP20G, making it easy to integrate into existing toolholders and tool management systems. With a plate form of Rhombus 55° and a plate thickness designation of 06, the geometry is compatible with common turning holders, simplifying inventory and changeover. The coated grade is optimised specifically for steel workpieces, so process engineers can select cutting data with confidence; the result is reduced trial time during setup and a quicker path to productive material removal. Handling the insert is straightforward thanks to its standard shape and tolerance class M, which supports consistent seating and repeatable clamping. Why this choice supports productivity and quality Selecting this Walter Tools insert emphasises efficiency and reliability: the coating technology and cutting geometry aim to reduce downtime and produce consistent surface finish in serial turning operations. The technical combination—coating, chipbreaker and negative rake—targets the most common challenges in steel turning: heat, chip control and edge wear. For operations seeking steady throughput and low variability, the insert helps to stabilise processes and support predictable part quality. Contact Metav Werkzeuge for tailored cutting data and specify the Walter Tools Tiger‑tec Gold WPP20G insert to optimise steel turning processes and increase production reliability Technical data Article number: DNMG150608-MP5-WPP20G-WALTER Label: Drehwendeschneidplatte DNMG150608-MP5 WPP20G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP20G Execution: G Facts / Core technical data Insert form: Rhombus 55° Insert size: 15 Thickness designation: 06 Corner radius: 0.8 mm Rake angle: 0° (negative) Chipbreaker: MP5 Tolerance class: M Special features / Versions Coating: Tiger‑tec Gold (coated carbide) Material application: steel (P) ISO designation: DNMG150608‑MP5 WPP20G Plate designation without grade: DNMG150608‑MP5 Suitable for general turning and mixed roughing/finishing operations FAQ What materials is this insert designed for? The DNMG150608‑MP5 WPP20G insert is formulated primarily for steel (ISO group P); the WPP20G grade and Tiger‑tec Gold coating are tuned for the heat and chip characteristics of steel turning. Can this insert be used for finishing passes? Yes, the Rhombic 55° geometry combined with a 0.8 mm corner radius allows the insert to perform controlled finishing cuts as well as more aggressive passes, depending on selected feeds and speeds. What chip behaviour can be expected with the MP5 chipbreaker? The MP5 chipbreaker promotes short, manageable chips and improved evacuation, reducing entanglement and facilitating uninterrupted production in medium cutting conditions. Is the insert compatible with standard DNMG toolholders? The insert follows the ISO DNMG geometry and the plate dimensions align with common DNMG toolholders, simplifying integration into existing tool setups. How does the Tiger‑tec Gold coating benefit production? Tiger‑tec Gold provides a wear‑resistant surface that improves flank life and edge security under typical steel turning temperatures, contributing to longer tool life and steadier part quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and product names are the property of their respective owners and are cited here for explanation only. There is no affiliation between our company and the mentioned brands. The item offered is an original, factory‑new product from the manufacturer.
DNMG150608-MP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the MP5 chipbreaker to increase productivity and extend tool life during steel turning; the robust rhombic geometry and 0° negative relief ensure process stability. Order the insert directly via Metav Werkzeuge or consult the team for cutting data and application advice. DNMG150608-MP5 WPP30G — Turning insert, Tiger·tec Gold for steel — Walter Tools A DNMG150608-MP5 WPP30G turning insert designed for efficient steel turning with a rhombic 55° geometry and optimised chip control. Tiger·tec Gold coating for long life MP5 chipbreaker for controlled chips Rhombic 55° geometry for versatile turning 0.8 mm corner radius for robust cutting edge Increase throughput with predictable performance The combination of the WPP30G grade and the Tiger·tec Gold coating leads to a measurable rise in machining uptime and consistent results when turning steels. The coated carbide base reduces flank wear and resists built-up edge, so machining cycles remain stable and tool changes become less frequent. This reliability translates into a better utilisation of machine time and lower component rejects, supporting leaner production processes and predictable planning. Better chip control and surface finish for straightforward post-processing The MP5 chipbreaker is engineered for dependable chip formation when machining steel, producing short, controllable chips that evacuate reliably. Improved chip behaviour reduces the risk of surface scoring and simplifies chip handling in automated or manual setups. The rhombic 55° geometry supports a wide range of turning operations while promoting consistent surface quality, reducing the need for secondary finishing and shortening downstream processing times. Application scope and machining guidance for decision-making This insert is intended primarily for steel applications and is suitable where a balance of wear resistance and toughness is required. The negative 0° relief enhances edge strength under interrupted cuts and roughing operations, while the 0.8 mm corner radius contributes to edge robustness during heavier cuts. For planners and process engineers, the insert offers a reliable compromise between finishing capability and durability in general turning tasks on unalloyed and alloyed steels. Material and process benefits that support operational goals Tolerance class M and a stable insert form factor deliver reproducible clamping and repeatable results across inserts, assisting quality assurance routines and reducing setup variation. The Tiger·tec Gold technology focuses on broad material coverage, providing an economical choice where a single grade must handle mixed steel lots. Predictable wear patterns support life-cycle calculations and help to estimate cost per component with greater confidence. Contact Metav Werkzeuge for tailored tooling recommendations and fast supply of Walter Tools DNMG150608-MP5 WPP30G inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: DNMG150608-MP5-WPP30G-WALTER Item designation: DNMG150608-MP5 WPP30G Manufacturer: Walter Tools Facts Size: 15 Thickness code: 06 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Special features Coating / series: Tiger-tec Gold Grade: WPP30G Chipbreaker: MP5 Geometry: Rhombus 55° Execution: G Material application: Steel FAQ Which materials are recommended for this insert? The WPP30G grade is optimised for machining steel; the DNMG150608-MP5 WPP30G insert performs well on unalloyed and alloyed steels in typical turning operations. What advantages does the MP5 chipbreaker provide? The MP5 chipbreaker ensures consistent, controllable chip formation which improves safety and surface quality while simplifying chip evacuation during medium to heavy turning. Is the insert suitable for interrupted cuts and roughing? Yes — the negative 0° relief and a 0.8 mm corner radius give the insert enhanced edge strength for interrupted cuts and robust roughing applications. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating increases wear resistance and helps to maintain a stable cutting edge, resulting in longer tool life and fewer changeovers in continuous production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original and brand-new.
DNMG150608-MS3 WPP20G WPP20G Wendeplatten - Walter Tools
Taking advantage of the Tiger‑tec Gold coating and the MS3 chipbreaker yields a cost‑efficient combination of durability and reliable chip control for steel turning. The robust rhombic 55° geometry with a 0.8 mm corner radius promotes stable cutting and consistent surface quality. Order the DNMG150608‑MS3 WPP20G directly via Metav Werkzeuge or ask our consultants if needed. DNMG150608‑MS3 WPP20G indexable turning insert, Tiger‑tec Gold, MS3 chipbreaker — Walter Tools (for steel) The DNMG150608‑MS3 WPP20G is an indexable turning insert engineered for general steel machining, combining a coated carbide grade from the Tiger‑tec Gold family with a proven MS3 chipbreaker for controlled, productive cutting. Tiger‑tec Gold coating for durable edge Optimised MS3 chipbreaker for reliable chips Rhombic 55° geometry for versatile turning 0.8 mm corner radius for stable cutting Proven productivity for demanding steel turning The coated carbide grade WPP20G from the Tiger‑tec Gold series is formulated for high process stability when machining steel. Thanks to the coating and substrate combination, the insert sustains performance over longer tool life cycles, which reduces changeover frequency and increases uptime. The result is a measurable efficiency gain: fewer interruptions, steadier quality and a better cost per component in continuous production. The insert designation appears as DNMG150608‑MS3, reflecting a standard indexable geometry compatible with common tool‑holder systems. Controlled chips and improved surface finish with MS3 The MS3 chipbreaker is designed to produce short, controllable chips in typical steel turning applications. For users unfamiliar with chipbreaker functions: the geometry modifies chip formation close to the cutting edge so that chips curl and break reliably, preventing entanglement and reducing secondary finishing work. This leads to a more consistent surface finish and simplifies handling in automated processes. The combined effect of chip control and the coated cutting edge supports stable feeds and speeds in everyday turning tasks. Robust geometry and edge strength for reproducible results A rhombic 55° insert form with a 0.8 mm corner radius provides a balance between edge strength and cutting versatility. The 0° negative clearance helps protect the cutting edge under interrupted cuts and heavy radial engagement, while the tolerance class M ensures consistent seating and indexing accuracy. Together, these geometric features contribute to repeatable dimensional accuracy and predictable tool life, which is particularly advantageous in series production where reproducibility is essential. Practical application advice and process security The insert is intended for the ISO P material group (steel) and is supplied in the coated carbide grade WPP20G, which is optimised for a variety of steel types. For process start‑up, begin with conservative speeds and feeds to validate the clamping system and machine rigidity; once stability is confirmed, the coating and substrate allow a controlled step‑up to typical machining parameters for steel. For tailored cutting data, tool‑holder selection or mixed‑operation planning, consult Metav Werkzeuge for technical guidance and material‑specific recommendations. For robust, high‑throughput steel turning choose the Walter Tools DNMG150608‑MS3 WPP20G and contact Metav Werkzeuge for customised cutting data and fast delivery: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: DNMG150608‑MS3‑WPP20G‑WALTER Designation: DNMG150608‑MS3 WPP20G Product type: indexable turning insert Brand: Walter Tools Numbers / Core technical data Insert size: 15 Thickness: 06 Corner radius: 0.8 mm Clearance angle: 0° (negative) Insert shape: Rhombus 55° Tolerance class: M Designs / Special features Series: Tiger‑tec Gold Grade: WPP20G (coated carbide) Chipbreaker: MS3 Execution: G Material application: Steel (ISO P) FAQ Which materials is this insert suitable for? The DNMG150608‑MS3 WPP20G is specified for the ISO P group, meaning it is intended primarily for machining steel. What benefit does the Tiger‑tec Gold grade provide? Tiger‑tec Gold in the WPP20G grade offers an optimised coating‑substrate combination that improves edge durability and process stability when turning steel. How does the MS3 chipbreaker help in practice? The MS3 chipbreaker shapes chips to curl and break close to the cutting zone, reducing chip control problems and improving surface finish during steel turning operations. Is the DNMG150608‑MS3 compatible with standard DNMG holders? The DNMG form follows the common indexable geometry, so the DNMG150608‑MS3 insert is compatible with standard DNMG tool holders designed for this insert shape. What impact does the 0.8 mm corner radius have on machining? A 0.8 mm corner radius increases edge strength and helps absorb cutting forces, which improves tool life and reduces the risk of chipping under heavier engagements. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. The brand name Walter Tools is mentioned for explanatory purposes only and does not imply any affiliation between our company and the trademark owners. The offered item is an original, factory‑new product of the stated manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com