DNMG150412-MP5 WPP05G Wendeplatten - Walter Tools
Take advantage of the combination of productive chip control, long tool life from the Tiger‑tec Gold grade and reliable edge stability for consistent steel turning results; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. DNMG150412-MP5 WPP05G — Turning insert (Tiger‑tec Gold) by Walter Tools A DNMG150412-MP5 WPP05G turning insert designed for efficient and repeatable steel machining with a 55° rhombic geometry and MP5 chip control. Tiger‑tec Gold coating for extended tool life MP5 chipbreaker for reliable chip control Rhombic 55° geometry for versatile turning 1.2 mm corner radius for robust edge stability Optimised performance for steel turning operations The coated carbide grade WPP05G from the Tiger‑tec Gold series delivers a balance of wear resistance and toughness tailored to steel machining. The combination of a controlled MP5 chipbreaker and a negative 0° rake helps stabilise cutting forces and produces predictable chips, reducing tool interrupts and downtime. This geometry is particularly suitable for both roughing and finishing passes where consistent surface quality and tool life are priorities. The technical design reduces the need for frequent tool changes, supporting higher machine uptime and predictable process outputs. Consistent edge stability and repeatable results A 1.2 mm corner radius and the rhombic 55° shape give the insert strong edge support under heavier feeds without sacrificing contour accuracy. The coated substrate supports thermal and mechanical resistance during steel cutting, which contributes to more consistent tool wear and repeatable part tolerances. For shops seeking to lower variability in serial production, the insert’s specifications provide measurable improvements in process stability and component consistency, translating into fewer reworks and more reliable cycle times. Practical advantages in workshop integration The insert’s compact size and standard DNMG form factor ensure compatibility with common turning toolholders, simplifying inventory and set‑up. The negative 0° rake orientation makes clamping robust and reduces insert movement at higher cutting forces, beneficial in interrupted cuts or less rigid set‑ups. Adoption is straightforward: the form factor facilitates quick replacement and consistent orientation, enabling operators to maintain process parameters across shifts with minimal adjustment. Choosing the right grade for material groups and applications The Walter WPP05G grade is optimised for group P materials (steel), offering a versatile performance profile across unalloyed and alloyed steels. The coated carbide construction provides improved edge life compared with uncoated grades while retaining enough toughness for a broad range of cutting conditions. When specifying inserts for batch production or mixed‑operation machining, this grade reduces the need for multiple specialised tools by covering common steel turning tasks reliably. Contact Metav Werkzeuge to configure the DNMG150412-MP5 WPP05G insert for the intended steel applications or to request tailored batch recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DNMG150412-MP5-WPP05G-WALTER ISO designation: DNMG150412-MP5 WPP05G Series: Tiger‑tec Gold Facts Size: 15 mm Thickness: 4 mm Corner radius: 1.2 mm Rake angle: 0° (negative) Tolerance class: M Special features Chipbreaker: MP5 Geometry: Rhombus 55° Grade: WPP05G (coated carbide) Material suitability: Steel (P) Execution: G Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The DNMG150412-MP5 WPP05G insert is designed primarily for steel machining (group P); the Walter Tools WPP05G grade targets typical steel heat generation and chip formation. How does the MP5 chipbreaker affect production? The MP5 chipbreaker provides controlled chip formation and evacuation, lowering the risk of chip entanglement and helping to maintain consistent cycle times with fewer interruptions. Can this insert be used for finishing operations? Yes, the rhombic 55° geometry and the coated WPP05G grade offer the balance of toughness and wear resistance suitable for both roughing and many finishing passes in steel. What toolholders are compatible with this insert shape? Standard DNMG turning toolholders that accept 55° rhombic inserts will accommodate this insert; the DNMG form factor ensures simple integration into common turning fixtures. Manufacturer: Walter Tools / Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for clarification only; there is no affiliation between our company and the trademark holders. The article offered is an original, factory‑new product from the manufacturer.
DNMG150412-MP5 WPP10G Wendeplatten - Walter Tools
The combination of a Tiger·tec Gold coating and the WPP10G carbide grade delivers high wear resistance and consistent edge life for steel turning operations; paired with the MP5 chipbreaker and a 1.2 mm corner radius, the insert offers reliable chip control and improved surface finish. Order the inserts via Metav Werkzeuge or consult the advisers for cutting data and integration into production. DNMG150412-MP5 WPP10G indexable turning insert — Tiger·tec Gold coating, for steel — Walter Tools The DNMG150412-MP5 WPP10G is a rhombic 55° indexable turning insert designed for reliable steel machining, combining a coated carbide grade with an MP5 chipbreaker for controlled chip formation and predictable tool life Tiger·tec Gold coating for extended tool life MP5 chipbreaker for controlled chips Rhombic 55° geometry for stable turning 1.2 mm corner radius for improved surface finish Longer tool life through advanced coating technology The Tiger·tec Gold coating applied to this grade WPP10G provides enhanced resistance to abrasive and adhesive wear during continuous turning of steel. The coating reduces flank wear and helps maintain a sharp cutting edge for a longer interval between index changes, which translates directly into lower tooling costs and less unplanned downtime. For production environments where consistent cycle times and predictable insert life matter, the coated carbide composition offers a measurable performance advantage compared with uncoated grades. Geometry and edge form for consistent machining results The rhombic 55° insert form combined with a negative 0° rake and 1.2 mm corner radius balances strength and accessibility to the workpiece, making it suitable for a range of finishing and medium-depth turning operations. The geometry ensures stable engagement, reduces vibration at the cutting edge and supports improved surface quality. The negative rake increases edge robustness under intermittent cuts, while the corner radius contributes to smoother transitions and a better finish on turned parts. Chip control and machining of steels Equipped with the MP5 chipbreaker, this insert is optimised for steels (material group P) and is configured to produce short, controllable chips across common cutting parameters. The chipbreaker design reduces the risk of entanglement and supports reliable evacuation, which is particularly beneficial in automated or high-volume turning centres. For users less familiar with chipbreaker function: MP5 guides and breaks the chip close to the cutting edge to prevent long, stringy chips and to protect both the tool and the workpiece. Integration into production and economic benefits The insert size and thickness follow established indexable tooling standards, allowing straightforward mounting in common turning holders and rapid index changes during set-up. By combining WPP10G carbide properties with a dedicated chipbreaker, the component contributes to higher process stability, fewer insert changes and improved overall productivity. Process engineers will find that optimised cutting-edge life and predictable wear rates simplify inventory planning and lower total cost of ownership for turning tools. Discuss application specifics and request cutting data from Metav Werkzeuge — order Walter Tools DNMG150412-MP5 WPP10G inserts or obtain feed and speed recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: DNMG150412-MP5-WPP10G-WALTER Label: Drehwendeschneidplatte DNMG150412-MP5 WPP10G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Series: Tiger-tec Gold Facts Insert form: Rhombus 55° Free rake angle: 0° (negative) Corner radius: 1.2 mm Insert size: 15 Thickness: 04 Tolerance class: M Special features Grade: WPP10G (coated carbide) Chipbreaker: MP5 Material application: Steel (P) Execution: G ISO designation: DNMG150412-MP5 WPP10G UID: DNMG150412-MP5-WPP10G-WALTER FAQ What materials is this insert suitable for? The insert is intended primarily for steel machining (material group P) and the WPP10G grade has been developed to handle typical heat generation and chip formation encountered when turning steels. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating offers enhanced wear resistance and thermal stability for the WPP10G carbide, extending edge life and helping to maintain consistent cutting performance in steel turning applications. What role does the MP5 chipbreaker play? The MP5 chipbreaker controls and divides chips close to the cutting edge, producing short, controllable chips to reduce entanglement and facilitate reliable chip evacuation during automated or manual turning. Is the insert compatible with standard DNMG tool holders? The ISO designation DNMG150412-MP5 WPP10G corresponds to standard DNMG geometry, making the insert suitable for common DNMG-compatible turning holders used in industry. What cutting tasks does the rhombic 55° geometry suit best? The rhombic 55° form is versatile for finishing and medium-depth turning operations; it offers stability and access for varied turning profiles while retaining edge strength under heavier cuts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and there is no affiliation between Metav Werkzeuge and the listed trademark owners. The offered item is an original, factory-new product of the manufacturer.
DNMG150412-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the MP5 chipbreaker to raise process reliability and reduce tool changes; benefit from the robust rhombic 55° geometry and 1.2 mm nose radius for consistent turning results. Order the insert directly via Metav Werkzeuge or consult our specialists for cutting data and application advice. DNMG150412-MP5 WPP20G indexable turning insert – Tiger·tec Gold, for steel machining (Walter Tools) DNMG150412-MP5 WPP20G is an indexable turning insert designed for efficient machining of steel with a coated carbide grade and a dedicated MP5 chipbreaker Tiger·tec Gold coating for enhanced wear resistance MP5 chipbreaker for controlled chip formation Rhombic 55° form for versatile turning applications Suitable for steel according to ISO P group Longer tool life through high-performance coating and material match The DNMG150412-MP5 WPP20G combines a Tiger·tec Gold coating with a coated carbide substrate to deliver extended tool life under typical steel machining conditions. The coating technology reduces flank wear and thermal degradation, which translates directly into longer tool life and fewer tool changes. For shops that prioritise machine uptime and predictable performance, the combination of coating and grade gives a measurable efficiency advantage without sacrificing surface finish. Stable chip control and geometry for consistent productivity The MP5 chipbreaker is engineered to produce consistent, controllable chips during turning of steels in the ISO P group. The rhombic 55° shape provides flexible tool orientation and access to shoulder and profile turning, while the 1.2 mm nose radius supports good surface quality with repeatable dimensional results. The insert’s 0° (negative) rake angle stabilises the cutting edge under interrupted cuts and shoulder engagement, increasing process security in serial production. Clear selection and application for industrial turning Tolerance class M and the standard form factor make tool selection straightforward for toolrooms and production departments. As a coated carbide insert optimised for steel, the component suits a wide range of applications from roughing to finishing when cutting data are adjusted for material and machine rigidity. The MP5 chip control reduces manual chip handling and contributes to safer, cleaner operation at higher productivity levels. Contact Metav Werkzeuge today to discuss how the Walter Tools DNMG150412-MP5 WPP20G insert fits specific turning tasks and to request recommended cutting parameters or a quotation. Technical data SKU: DNMG150412-MP5-WPP20G-WALTER Product: Drehwendeschneidplatte / indexable turning insert Grade: WPP20G Series: Tiger·tec Gold Facts Corner radius: 1.2 mm Inscribed circle / plate size: 15 mm Rake angle: 0° (negative) Tolerance class: M Thickness code: 04 Special features MP5 chipbreaker Rhombic 55° plate form Coated carbide (Tiger·tec Gold) Material group: P (steel) Execution: G ISO designation: DNMG150412-MP5 WPP20G FAQ What steels is this insert suitable for? The DNMG150412-MP5 WPP20G is specified for ISO group P and is suited to the machining of unalloyed and alloyed steels where good wear resistance and chip control are required. How does the Tiger·tec Gold coating help in production? Tiger·tec Gold on the WPP20G grade reduces flank wear and improves thermal stability, resulting in longer tool life and more consistent component quality during steel turning. Which applications benefit from the MP5 chipbreaker? The MP5 chipbreaker is ideal for general-purpose turning where controlled chips and reliable evacuation are needed, including shoulder and profile turning on carbon and alloy steels. Is the negative rake angle important for interrupted cuts? Yes, the 0° (negative) rake provides a stronger cutting edge, improving robustness and stability during interrupted cuts or when machining with variable engagement. Can the insert be used for finishing operations? With an appropriate feed and speed, the 1.2 mm nose radius enables finishing to a good surface quality; the insert is versatile for both roughing and finishing when cutting data are adjusted accordingly. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used solely for descriptive purposes and to indicate compatibility; there is no affiliation between Metav Werkzeuge and the manufacturers mentioned. The offered item is an original, brand-new product from the stated manufacturer.
DNMG150412-MP5 WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger·tec Gold coating, the MP5 chipbreaker and the stable 1.2 mm corner radius for consistent, productive turning of Stahl; order the insert directly via Metav Werkzeuge or consult our team for application advice. DNMG150412-MP5 WPP30G turning insert by Walter Tools — Tiger·tec Gold coated for Stahl DNMG150412-MP5 WPP30G is a negative-rake, rhombic 55° turning insert designed for general and demanding turning of Stahl, offering a balance of wear resistance and toughness for extended tool life. Tiger·tec Gold coating for longer life Optimised MP5 chipbreaker for Stahl turning Rhombus 55° form for versatile profiling 1.2 mm corner radius for stable cutting Proven machining performance that raises productivity The coated carbide grade WPP30G, utilising Tiger·tec Gold technology, combines wear resistance with controlled toughness to support longer tool life under typical turning conditions for Stahl. With the insert’s MP5 chipbreaker, chip formation is directed and predictable, reducing interruptions for chip control and improving cycle-time consistency. This results in more productive machining by lowering tool-change frequency and ensuring steady surface finishes on medium to heavy turning tasks. Consistent component quality through stable geometry The Rhombus 55° shape and 0° relief (negative rake) provide a stable cutting geometry that resists vibration and preserves the cutting edge. The 1.2 mm corner radius contributes to reliable edge strength and repeatable profile integrity, which is particularly useful when turning interrupted surfaces or performing roughing passes. Such geometric stability means repeatable part tolerances and fewer rework cycles, supporting leaner production workflows and better use of machine time. Practical choice for mixed production environments As a coated, beschichtetes Hartmetall insert in the Tiger·tec Gold series, this grade is specified for machining Stahl and offers broad applicability across many steel grades as classified in ISO 513. The design is intended to handle typical heat generation and chip behaviour encountered when machining steels, making it a pragmatic option for workshops that require one reliable grade for multiple applications. Selection of this insert supports a straightforward tooling strategy, simplifying inventory while maintaining process security. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and assistance integrating DNMG150412-MP5 WPP30G into production Technical data SKU: DNMG150412-MP5-WPP30G-WALTER Designation: DNMG150412-MP5 WPP30G Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Gold Facts Corner radius: 1.2 mm Relief angle: 0° (negative) Insert form: Rhombus 55° Insert size: 15 Thickness code: 04 Special features Grade: WPP30G Chipbreaker: MP5 Coating technology: Tiger·tec Gold Material suitability: Stahl Tolerance class: M FAQ What material group is this insert intended for? The DNMG150412-MP5 WPP30G insert is designed primarily for machining Stahl as specified by its material suitability and coating characteristics. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker on this Walter Tools insert promotes controlled chip formation during turning of Stahl, improving chip disposal and reducing the risk of chip-related interruptions. Is the insert suitable for finishing as well as roughing? With a 1.2 mm corner radius and negative rake geometry, the insert offers a balance that can be used for robust finishing and roughing operations depending on cutting parameters and machine conditions. What advantages does Tiger·tec Gold bring to production? Tiger·tec Gold coating enhances wear resistance and edge stability, which typically extends tool life and contributes to consistent component quality when machining Stahl. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150412-MW5 WKK10S WKK10S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Silver coating and the WKK10S grade tailored for cast iron, together with a MW5 chipbreaker and a 1.2 mm corner radius for reliable chip control and extended edge life. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. DNMG150412-MW5 WKK10S turning indexable insert — Tiger·tec Silver coating, for cast iron (Walter Tools) A DNMG150412-MW5 WKK10S turning insert engineered for stable finishing and semi-finishing of cast iron components in demanding production environments. Tiger·tec Silver coating technology WKK10S grade for cast iron machining MW5 chipbreaker for stable chip control 1.2 mm corner radius, Rhombic 55° shape Consistent chip control for efficient cast iron turning The insert combines the MW5 chipbreaker with the WKK10S wear-resistant grade to manage the short, brittle chips typical of cast iron. The chipbreaker geometry reduces the risk of chip entanglement and ensures predictable breakage, which supports consistent cycle times. Because the grade and breaker are matched to abrasive wear conditions, tool changes are less frequent and process stability is improved. This makes the insert particularly suitable for repetitive production where uptime matters. Edge stability and wear resistance that extend cutting intervals The Tiger·tec Silver coating increases resistance to abrasive wear while maintaining a sharp cutting edge for longer. The 1.2 mm corner radius contributes to a stronger edge for interrupted cuts and small depths of cut, reducing the likelihood of chipping during heavy engagement. The Rhombic 55° form provides a balance between approach angle and strength, enabling versatile use across finishing and light roughing operations. As a result, surface quality and dimensional consistency benefit from reduced edge degradation. Easy integration and predictable tool behaviour in the toolroom Marked as DNMG150412-MW5, the insert is compatible with standard toolholders designed for rhombic 55° turning inserts and is manufactured to tolerance class M for consistent seating and clamping. The negative 0° rake angle supports a robust cutting edge suited to the intermittent cutting conditions often found when machining cast iron. The standardised geometry and thickness designation allow straightforward inventory handling and quick replacement without complex reprogramming, helping to keep machine downtime to a minimum. For application advice on Walter Tools inserts such as the DNMG150412-MW5 WKK10S and to check availability for specific machining tasks, contact Metav Werkzeuge for tailored recommendations and ordering: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: DNMG150412-MW5-WKK10S-WALTER Label: Drehwendeschneidplatte DNMG150412-MW5 WKK10S Walter Tools Series: Tiger-tec Silver Grade: WKK10S Numbers / Core technical data Corner radius: 1.2 mm Free angle: 0° (negative) Inscribed circle / size: 15 Thickness: 04 Tolerance class: M Plate form: Rhombus 55° Special features / Designs Coating: Tiger·tec Silver Chipbreaker: MW5 Material of application: cast iron (ISO group K) Sortenbeschreibung: coated carbide FAQ What makes the WKK10S grade suitable for cast iron? The WKK10S grade is a coated carbide formulation within the Tiger·tec Silver family that is optimised for the abrasive wear and short-chip behaviour of cast iron, providing improved wear resistance and stable cutting performance. Which chip control behaviour can be expected from the MW5 chipbreaker? The MW5 chipbreaker promotes short, segmented chips when turning cast iron, improving chip evacuation and reducing the risk of entanglement in automated or manual machining environments. Does this insert fit standard DNMG toolholders? Yes, the DNMG150412-MW5 geometry corresponds to standard rhombic 55° DNMG inserts and is intended for holders designed for that form factor; tolerance class M supports reliable seating. How does the 1.2 mm corner radius affect surface finish? A 1.2 mm corner radius strengthens the cutting edge for interrupted cuts and contributes to a consistent surface finish in finishing and light semi-finishing passes while extending edge life. Is the insert intended for roughing or finishing operations? The combination of negative 0° rake, 1.2 mm corner radius and the WKK10S grade makes the insert versatile for finishing and light semi-roughing on cast iron; for heavy roughing, alternative geometries may be preferred. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150412-MW5 WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of wear resistance, reliable chip control and a robust negative-rake geometry to keep turning operations on steel consistent and productive. Order the DNMG150412-MW5 WPP10G directly via Metav Werkzeuge or consult the Metav team for selection support and delivery options. DNMG150412-MW5 WPP10G turning insert for steel by Walter Tools — Tiger‑tec Gold coated, 0° negative rake The DNMG150412-MW5 WPP10G is a coated turning insert designed for general steel machining, offering a balance of wear resistance and toughness for stable metalcutting performance. Tiger‑tec Gold coating for extended tool life Negative rake 0° for robust cutting Rhombic 55° shape for versatile turning 1.2 mm corner radius for strong cutting edge Consistent, high‑productivity steel machining The insert combines a coated carbide grade with the Tiger‑tec Gold technology to deliver predictable wear behaviour when machining steels. Designed for ISO group P applications, the geometry and chipbreaker MW5 help to control chips and reduce rework. The Rhombic 55° form enables both off‑centre roughing and finishing passes with reduced vibration, while the 0° negative rake provides cutting robustness during interrupted cuts. These features translate into fewer tool changes and a smoother production flow for turning operations on unalloyed and alloyed steels. Stable cutting performance and process security Built to balance wear resistance and toughness, the grade WPP10G is optimised for reliable edge life across a wide range of cutting conditions. The combination of the coating system and substrate offers improved resistance to abrasive wear and built‑up edge, resulting in a more consistent surface finish and extended service intervals. The 1.2 mm corner radius strengthens the cutting edge under heavy engagement, contributing to process security in series production. For planners, this means steadier cycle times and less variation in part quality. Easy integration and practical handling on the shop floor The insert fits standard DNMG toolholders and is compatible with established tool‑holding systems, simplifying retrofit and stocking procedures. Its moderate thickness and standard form factor support straightforward indexing and replacement, while the chip control features reduce the risk of entanglement in automatic machining cells. For technical clarification or application‑specific recommendations, Metav Werkzeuge provides direct consultancy and can supply cutting data for optimising speeds and feeds for given steel grades. For tailored cutting solutions with Walter Tools' Tiger‑tec Gold inserts contact Metav Werkzeuge for expert selection and fast delivery on DNMG150412-MW5 WPP10G. Technical Data Article number: DNMG150412-MW5-WPP10G-WALTER Name: Drehwendeschneidplatte DNMG150412-MW5 WPP10G Walter Tools Manufacturer: Walter Tools Product type: Turning insert Series/grade: Tiger‑tec Gold / WPP10G ISO designation: DNMG150412-MW5 WPP10G Measurements Size: 15 mm Thickness: 4.0 mm Corner radius: 1.2 mm Relief angle: 0° (negative) Shape: Rhombic 55° Features & Applications Chipbreaker: MW5 Grade category: coated carbide (Tiger‑tec Gold) Material suitability: Steel (ISO P) Tolerance class: M Execution: G FAQ Is the insert suitable for stainless steel? This insert is specified for steel (ISO P); the DNMG150412-MW5 WPP10G is not stated as optimised for stainless steel, so a stainless‑specific grade is recommended for austenitic materials. What is the corner radius and how does it affect machining? The 1.2 mm corner radius on the DNMG150412-MW5 WPP10G provides a robust cutting edge that improves stability under heavier cuts and helps maintain a consistent surface finish on steel. Which chip control does this insert use? The insert features the chipbreaker MW5, designed to support controlled chip formation in common steel turning tasks and to reduce the risk of long, entangling chips. Can standard DNMG holders be used with this insert? Yes, the geometry follows the DNMG form factor and is compatible with standard DNMG‑type toolholders for straightforward integration in existing tool sets. What coating technology is applied and what benefit does it bring? The insert uses Tiger‑tec Gold coating technology (grade WPP10G), which enhances wear resistance and thermal stability in steel machining to provide longer, more consistent tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation between our company and the mentioned manufacturers. The offered item is original and brand new from the manufacturer.
DNMG150412-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Gold coating and the RP5 chipbreaker ensures reliable chip control and extended tool life; order the insert directly via Metav Werkzeuge or contact the consultants for cutting-data guidance. DNMG150412-RP5 WPP10G indexable turning insert — Tiger·tec Gold coated carbide, RP5 chipbreaker (Walter Tools) The DNMG150412-RP5 WPP10G is an indexable turning insert designed for efficient machining of steel, offering a rhombic 55° geometry and a robust, wear-resistant coating for demanding production environments Tiger·tec Gold coated carbide for wear resistance RP5 chipbreaker for predictable chip control Rhombic 55° geometry for versatile turning 1.2 mm corner radius, 0° negative rake High-efficiency machining for steel components The coated carbide grade in this insert, identified by the WPP10G grade and the Tiger·tec Gold series, is engineered for consistent performance when machining steels. Thanks to the combination of a wear-resistant coating and a balanced carbide substrate, the tool provides stable cutting conditions and reproducible tool life. The design focuses on thermal and mechanical demands typical for steel cutting, delivering improved productivity through longer service intervals and decreased downtime for insert changes. Predictable chip control and extended edge life Built around the RP5 chipbreaker, the insert promotes controlled chip formation across a range of cutting parameters. This reduces the risk of built-up edge and supports continuous operation in automated and manual turning centres alike. The coated surface lowers friction at the cutting zone, which contributes to reliable edge life and consistent surface finish. For production contexts where repeatability matters, the RP5 geometry and coating technology help maintain process stability and repeatable cycle times. Versatile geometry that supports flexible production The rhombic 55° shape with a 1.2 mm corner radius and 0° (negative) rake angle offers a compromise between strength and accessibility, allowing for effective roughing and finishing passes in many turning tasks. This geometry suits a variety of toolholder setups and turning strategies, making the insert a practical choice where changeovers and mixed lots demand adaptable tooling. The plate’s form supports radial access into complex contours while preserving edge robustness during interrupted cuts. Practical benefits for workshop efficiency Selecting a grade from the Tiger·tec Gold family brings a tangible operational advantage: predictable tool life reduces inventory turnover and simplifies assortment planning. The insert’s specification aligns with standard turning workflows for steels, enabling straightforward integration into existing processes and cutting-data tables. For operations seeking to raise throughput without increasing complexity, the combination of grade, chipbreaker and form supports faster cycle times and fewer quality deviations. Contact Metav Werkzeuge for tailored recommendations on cutting data and to discuss the DNMG150412-RP5 WPP10G insert specifications — Metav Werkzeuge provides practical, application-focused advice and prompt delivery options Technical Data SKU: DNMG150412-RP5-WPP10G-WALTER Designation: DNMG150412-RP5 WPP10G Label: Drehwendeschneidplatte DNMG150412-RP5 WPP10G Walter Tools Facts Corner radius: 1.2 mm Inscribed size: 15 Thickness: 04 Relief angle: 0° (negative) Tolerance class: M Special features Series / Coating: Tiger·tec Gold Grade: WPP10G Chipbreaker: RP5 Shape: Rhombus 55° Execution: G Material/application code: P (suitable for steel) Product type: indexable turning insert FAQ What materials is this insert intended for? The DNMG150412-RP5 WPP10G from Walter Tools is designed primarily for machining steel (group P), with the grade and coating optimised for typical steel cutting conditions. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on the DNMG150412-RP5 WPP10G promotes controlled chip formation, improving process stability and enabling consistent surface finish in turning operations. Is the Tiger·tec Gold coating suitable for high-production runs? Yes, the Tiger·tec Gold coating used on this insert enhances wear resistance and supports extended tool life, making the grade appropriate for repeated production cycles. Which toolholder geometry is recommended for the rhombic 55° shape? A standard holder compatible with DNMG rhombic 55° inserts is recommended; the DNMG150412-RP5 WPP10G fits common turning systems and supports both general-purpose and production setups. What benefits does the 1.2 mm corner radius provide? The 1.2 mm corner radius increases edge strength and helps absorb cutting forces during roughing, while still allowing satisfactory surface finish in finishing passes with appropriate feeds. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen. The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names belong to their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the mentioned brands. The offered item is original, factory-new merchandise of the manufacturer.
DNMG150412-RP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of a wear-resistant Tiger‑tec Gold grade and precise RP5 chip control to boost throughput and repeatability in steel turning operations; order directly via Metav Werkzeuge or request tailored advice from our consultants. DNMG150412-RP5 WPP20G indexable turning insert — Tiger‑tec Gold, for steel — Walter Tools DNMG150412-RP5 WPP20G is a rhombic 55° indexable turning insert designed for reliable steel machining in general turning applications Tiger·tec Gold coated carbide Optimised for steel machining RP5 chipbreaker for reliable chip control Rhombic 55° form, 1.2 mm corner radius Higher productivity through predictable tool life The combination of the WPP20G grade and Tiger‑tec Gold coating provides a balance of wear resistance and toughness that translates into longer cutting intervals and fewer tool changes. Coated carbide substrates reduce flank wear under the thermal loads typical for steel machining; this results in more stable cycle times and lower overall production cost per component. The design enables efficient heat management and consistent edge security, supporting continuous, economically attractive turning operations. Process stability and surface quality for steel turning The rhombic 55° geometry with a 1.2 mm corner radius and 0° (negative) relief creates a robust cutting edge that tolerates interrupted cuts and variable feed conditions. The RP5 chipbreaker is engineered to control chip formation when cutting steels (ISO group P), giving better swarf handling and reducing the risk of built-up edge. For users less familiar with insert geometry: the corner radius influences strength and finish—larger radii increase edge strength and can improve surface finish at suitable feeds, while the chipbreaker shapes the chip to avoid tangling and protect the workpiece and toolholder. Robust design, simple logistics and grade clarity Marked as DNMG150412-RP5 WPP20G, the insert matches standard DNMG toolholders and is straightforward to identify in inventory systems, aiding fast tool changeovers. The WPP20G designation denotes a coated carbide engineering grade tailored to steel, providing a reproducible balance between wear resistance and toughness across batch productions. This predictability supports quality control and reduces scrap rates. For mixed-shop environments, the clear grade and chipbreaker coding streamline tooling decisions and reduce setup time. Contact Metav Werkzeuge for tailored cutting data or to discuss the best insert grade for specific steel alloys; reach our team at info@metav-werkzeuge.com or +49 2822 7131930 and let Metav Werkzeuge advise on optimal parameters for Walter Tools inserts Technical Data SKU: DNMG150412-RP5-WPP20G-WALTER Item: Turning indexable insert DNMG150412-RP5 WPP20G Manufacturer: Walter Tools Series: Tiger‑tec Gold Core specifications Insert shape: Rhombic 55° Inscribed circle / size: 15 mm Corner radius: 1.2 mm Thickness: 4 mm Relief angle: 0° (negative) Tolerance class: M Special features Grade: WPP20G (coated carbide) Chipbreaker: RP5 Application: Steel (ISO P) Coating technology: Tiger‑tec Gold Designation / ISO: DNMG150412-RP5 WPP20G FAQ What materials is this insert suitable for? The DNMG150412-RP5 WPP20G insert is specified for machining steels (ISO group P); the WPP20G grade and RP5 chipbreaker are optimised for typical steel cutting conditions. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on this Walter Tools insert shapes chips for controlled evacuation, improving swarf handling and reducing the likelihood of chip-related surface damage during steel turning. Can this insert be used in standard DNMG toolholders? Yes, the DNMG150412-RP5 designation corresponds to standard DNMG holder interfaces, allowing straightforward replacement and compatibility with conventional toolposts. What advantage does the Tiger‑tec Gold coating provide? Tiger‑tec Gold enhances wear resistance while maintaining edge toughness, giving the insert a balanced performance that extends cutting intervals and improves operational consistency in steel turning. How does the 1.2 mm corner radius influence results? A 1.2 mm corner radius increases edge strength and can improve surface finish at appropriate feeds; it is suitable for general turning where a compromise between finish and robustness is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanation only and do not imply any affiliation with our company. The offered article is an original, factory-new product of the manufacturer Walter Tools.
DNMG150412-RP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, consistent chip control and a robust negative relief for stable, productive turning of steel; order the inserts directly via Metav Werkzeuge or consult our specialists for process optimisation. Indexable turning insert DNMG150412-RP5 WPP30G — Tiger·tec Gold for steel (Walter Tools) DNMG150412-RP5 WPP30G is a negative-relief, rhombic 55° indexable turning insert designed for precision steel machining and high process reliability Tiger·tec Gold coating for long edge life Designed for ISO P — machining steel Rhombic 55° insert with 1.2 mm corner radius Negative 0° relief for secure chip control Consistent tool life for productive turning The coated carbide grade WPP30G from the Tiger·tec Gold series delivers a balance of wear resistance and toughness that keeps tool changes to a minimum. Optimised for the thermal and chip-formation conditions typical of ISO P steels, the grade supports sustained cutting performance and predictable flank wear. With a robust chipbreaker (RP5) and a proven coating system, this insert is aimed at improving uptime and lowering unit costs through fewer interruptions for indexing and replacement. Enhanced surface finish and reliable chip control The rhombic 55° geometry combined with the 0° (negative) relief produces a secure cutting position that helps maintain dimensional stability and repeatable tolerances. The controlled 1.2 mm corner radius reduces edge chipping while contributing to a consistent surface finish in finishing and medium-turning operations. The RP5 chipformer assists chip segmentation and evacuation, which reduces the risk of built-up edge and stabilises the machining process across varying steel grades. Easy integration into existing tool systems and process chains The insert’s standard DNMG150412-RP5 designation ensures compatibility with common toolholders and clamping systems, allowing fast retrofitting into established production cells. The 15 mm inscribed circle and 4.0 mm thickness make it suitable for a wide range of turning applications where a balance of rigidity and accessibility is required. Backed by Walter Tools’ manufacturing quality, the grade and series facilitate straightforward tooling decisions when optimising for cycle time, tool life and part quality. Contact Metav Werkzeuge today for tailored recommendations on Tiger·tec Gold inserts — specify the DNMG150412-RP5 WPP30G for demanding steel applications and let our team advise on the right chipformer and cutting data. Technical data SKU: DNMG150412-RP5-WPP30G-WALTER Product type: Indexable turning insert Brand: Walter Tools ISO designation: DNMG150412-RP5 WPP30G Core technical data Inscribed circle: 15 mm Thickness: 4.0 mm Corner radius: 1.2 mm Relief angle: 0° (negative) Geometry: Rhombic 55° Special features Grade: WPP30G (coated carbide) Series: Tiger·tec Gold Chipformer: RP5 Material application: Steel (ISO P) Tolerance class: M Execution: G FAQ Is this insert suitable for general steel turning tasks? Yes. The DNMG150412-RP5 WPP30G insert from Walter Tools is developed specifically for ISO P steels, offering a usable balance of wear resistance and toughness for typical steel machining. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP30G grade improves thermal and wear resistance, extending cutting edge life and stabilising performance during prolonged machining of steel components. Which chipformer is fitted and what does it do? The insert features the RP5 chipformer, which promotes controlled chip breakage and evacuation, reducing the likelihood of built-up edge and improving process reliability. How does the negative 0° relief affect machining? The 0° (negative) relief gives a secure cutting geometry that reduces vibration and provides stable contact between tool and workpiece, beneficial for medium to heavy turning operations and finish-critical passes. Can this insert be used in standard DNMG toolholders? Yes. The DNMG150412 designation corresponds to widely used indexable insert standards, enabling straightforward replacement in compatible toolholders without additional adapter requirements. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. The brand name Walter Tools is used for descriptive purposes only. The offered item is an original, factory-new product of the manufacturer.
DNMG150602-FM5 WSM10S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating, the WSM10S grade and precise FM5 chip control for consistent, productive turning of stainless steel and heat‑resistant alloys; order directly via Metav Werkzeuge or consult the technical team for process optimisation. DNMG150602-FM5 WSM10S Walter Tools — Turning indexable insert, Tiger‑tec Silver, Rhombic 55° The DNMG150602-FM5 WSM10S is a rhombic 55° turning insert engineered for stable machining of stainless steels and heat‑resistant superalloys in demanding production environments Tiger‑tec Silver coating for thermal resistance WSM10S grade for stainless steels and superalloys FM5 chipbreaker for controlled chip formation Rhombic 55° geometry with 0.2 mm corner radius High‑performance grade for demanding materials The combination of the WSM10S grade and the Tiger‑tec Silver coating delivers a cutting material designed for high cutting temperatures and abrasive conditions. In practice, this means more stable cutting edges and predictable wear behaviour when machining stainless steels (ISO group M) and high‑temperature superalloys (ISO group S). The coated cemented carbide substrate provides heat resistance and reduces the tendency to form built‑up edge, supporting longer tool life and fewer unplanned tool changes — a direct benefit to throughput and process reliability. Geometry and chip control that maintain surface quality The Rhombic 55° shape combined with the FM5 chipbreaker and a 0° (negative) rake results in robust cutting performance and controlled chip formation. A 0.2 mm corner radius balances edge strength and surface finish, reducing vibration and promoting consistent component tolerances. The specific chipformer design facilitates efficient evacuation of swarf in interrupted cuts and heavy feeds, which helps prevent re‑cutting of chips and improves workplace safety and cycle time stability. Practical advantages on the shop floor This insert supports versatile machining strategies: stable edge life for continuous turning, and dependable performance in mixed‑material runs that include stainless steel and nickel‑based alloys. The coated grade is particularly suited to operations where thermal loads and adhesive wear are critical. For production planners and process engineers, the result is a measurable reduction in downtime through fewer insert changes and improved first‑pass yields, leading to a stronger cost‑benefit ratio over multiple production batches. Compatibility, handling and identification The insert is delivered in the standard DNMG format and is identified as DNMG150602-FM5 WSM10S, which simplifies procurement and tool‑holder matching. Key dimensions and features are clearly defined: Rhombus 55° plate form, plate size 15, plate thickness 06, and FM5 chipbreaker geometry. These specifications enable straightforward integration into existing tool assemblies and make it simple to choose suitable cutting parameters for feed, speed and depth of cut while maintaining a focus on reproducible surface finish and extended edge life. Contact Metav Werkzeuge for tailored cutting data and application advice on Walter Tools Tiger‑tec Silver inserts to ensure optimal machining performance and tool life Technical Data Article number: DNMG150602-FM5-WSM10S-WALTER Product type: Drehwendeschneidplatte (turning indexable insert) Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM10S Facts Plate form: Rhombus 55° Free rake angle: 0° (negative) Corner radius: 0.2 mm Plate size: 15 Plate thickness: 06 Chipbreaker: FM5 Tolerance class: M Material applicability: S / M Special features Coating: Tiger‑tec Silver (coated cemented carbide) Suitability: stainless steel and heat‑resistant superalloys Robust geometry for stable edge life Designed for improved chip control and surface quality FAQ What materials is this insert optimised for? The DNMG150602-FM5 WSM10S is optimised for stainless steel (ISO group M) and heat‑resistant superalloys (ISO group S), where thermal resistance and edge stability are essential. How does the FM5 chipbreaker benefit machining? The FM5 chipbreaker promotes controlled chip formation and efficient swarf evacuation, reducing the risk of chip entanglement and improving surface finish consistency. What does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating enhances heat resistance and wear performance, which helps maintain cutting edge integrity under high temperatures and abrasive conditions. Can this insert be used in interrupted cuts? Yes, the robust edge geometry and chip control of this insert make it suitable for interrupted cuts while maintaining a stable cutting edge and consistent part quality. How is the insert identified for ordering and tool selection? The insert is listed as DNMG150602-FM5 WSM10S, which matches standard DNMG toolholder interfaces and clarifies grade, chipbreaker and geometry. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150602-FM5 WSM20S WSM20S Wendeplatten - Walter Tools
Benefit from a combination of proven Tiger·tec Silver coating and the WSM20S grade for secure chip formation when machining stainless steels and heat‑resistant alloys; the 0° negative rake and FM5 chipbreaker further enhance edge stability and process reliability. Order directly via Metav Werkzeuge or consult the Metav team for process recommendations. DNMG150602-FM5 WSM20S – Turning insert, Tiger·tec Silver, Walter Tools The DNMG150602-FM5 WSM20S is a precision indexable turning insert designed for machining stainless steels and heat‑resistant superalloys, featuring a 0° negative rake and an FM5 chipbreaker for predictable chip control. Tiger·tec Silver coated carbide grade WSM20S Suitable for stainless steels and superalloys 0° negative rake for stable cutting Rhombic 55° form with 0.2 mm corner radius Long‑term edge stability for demanding materials The combination of Tiger·tec Silver coating and the WSM20S carbide grade provides high thermal resistance and stable cutting edges, reducing flank wear when turning tough alloys. Coating technology improves heat dissipation at the cutting zone and supports continuous production runs with fewer index changes. The insert’s design focuses on keeping the cutting edge intact under heavy thermal and mechanical loads, which translates into fewer unplanned tool changes and more consistent workpiece quality. Predictable chip control and safer machining Equipped with the FM5 chipbreaker, this insert promotes controlled chip formation even in materials that tend to form long, stringy chips. The chip control geometry reduces the risk of entanglement and supports reliable evacuation of swarf in automated and manual turning operations. As a result, cycle times remain stable and downstream processes are protected from irregular chip behaviour, contributing to a smoother production flow. Precision geometry for repeatable results The Rhombus 55° form combined with a 0.2 mm corner radius and 0° negative rake ensures a robust cutting edge that balances cutting forces and surface finish. The tolerance class M supports close dimensional repeatability in serial production. These geometric choices are aimed at achieving a compromise between edge strength and fine surface quality, making the insert suitable for shoulder cuts, finishing passes and moderate roughing where predictable performance is required. Application focus: where the insert adds most value This grade and geometry excel when machining stainless steels and heat‑resistant superalloys (ISO groups M and S). The coated carbide and chipbreaker are tuned to counter the typical challenges of these materials: poor heat conduction, work hardening and aggressive wear. In setups demanding process security and consistent tool life, the insert delivers a measurable improvement in repeatability and productivity compared with general‑purpose grades. Contact Metav Werkzeuge for tailored tooling recommendations and process optimisation based on Walter Tools inserts and the DNMG150602-FM5 WSM20S specification Technical data SKU: DNMG150602-FM5-WSM20S-WALTER ISO designation: DNMG150602-FM5 WSM20S Product type: Turning insert Manufacturer: Walter Tools Facts Insert size: 15 mm Thickness code: 06 Corner radius: 0.2 mm Relief angle: 0° (negative) Insert form: Rhombus 55° Tolerance class: M Chipbreaker: FM5 Special features Grade: WSM20S Coating: Tiger·tec Silver Substrate: coated carbide Material suitability: stainless steels (M), heat‑resistant superalloys and titanium (S) Series: Tiger·tec Silver Execution: G Brand: Walter Tools FAQ What materials is this insert suitable for? The DNMG150602-FM5 WSM20S insert is designed primarily for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), where the Tiger·tec Silver coating supports secure chip formation and thermal resistance. How does the FM5 chipbreaker affect machining? The FM5 chipbreaker on this turning insert produces controlled chips and reduces the risk of long, tangled swarf, improving process reliability and facilitating safer swarf evacuation in automated and manual turning applications. Is the insert suitable for finishing operations? Yes; the Rhombus 55° geometry with a 0.2 mm corner radius and 0° negative rake provides a balance between edge strength and surface quality, making it appropriate for finishing and light to moderate roughing tasks. Which series and coating technology does this insert use? This indexable insert belongs to the Tiger·tec Silver series and is supplied in the WSM20S coated carbide grade to enhance wear resistance and thermal stability during machining of tough alloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150604-FM5 WMP20G G Wendeplatten - Walter Tools
Take advantage of the combination of high process stability, dependable Tiger·tec Gold coating and precise edge geometry for consistent performance when machining stainless steel; order directly via Metav Werkzeuge or contact our consultants for application advice. DNMG150604-FM5 WMP20G indexable turning insert — for stainless steel, Rhombus 55° geometry | Walter Tools The DNMG150604-FM5 WMP20G is an indexable turning insert designed for reliable finishing and medium-duty roughing in stainless steel, featuring a Rhombus 55° form and a 0° negative rake for stable cutting. Rhombus 55° geometry for versatile turning Tiger·tec Gold coated carbide grade WMP20G 0° negative rake for stable cutting FM5 chipbreaker for reliable chip control Stable cutting in stainless steel for predictable results The grade belongs to the Tiger·tec Gold series and is a coated carbide designed specifically for stainless steel; this ensures improved thermal resistance and a stable cutting edge under the typical heat and toughness of such materials. The insert’s geometry, combined with the FM5 chipbreaker, supports secure chip formation and evacuation, reducing the risk of built-up edge and prolonging tool life. This results in fewer interruptions and more consistent component quality on medium-duty operations. Geometry and edge design that improve process reliability With its Rhombus 55° outline and a corner radius of 0.4 mm, the insert balances edge strength and surface finish. The 0° negative rake creates a robust cutting edge that resists chipping when encountering varying material hardness or interrupted cuts. Such geometry is particularly effective where a controlled cutting action and repeatable performance are priorities, helping maintain cycle times and reducing rework in serial production environments. Chip control and operational efficiency with FM5 The built-in FM5 chipbreaker is optimised for stainless steel, promoting short, controllable chips that are easy to evacuate even at moderate feeds. Improved chip control minimises machine downtime due to chip-related issues and reduces manual intervention. When combined with the grade’s coating technology, the result is a component machining process that is both more economical and less labour-intensive over the tool life. Production benefits and application guidance The insert is a practical choice for manufacturers seeking a balance between surface quality and productivity on stainless steel components. The WMP20G grade supports medium to robust cutting conditions, offering good wear resistance and consistent edge condition. For best results, pair the insert with appropriate toolholders and follow standard cutting parameter tables for coated carbide inserts in stainless steel; the insert’s stable edge and chip control characteristics help to widen the usable process window without compromising finish. For recommendations tailored to specific stainless steel grades and machine setups, contact Metav Werkzeuge — our consultants provide application support and supply options for Walter Tools inserts. Technical data Article number: DNMG150604-FM5-WMP20G-WALTER SKU: DNMG150604-FM5-WMP20G-WALTER Product type: indexable turning insert Brand: Walter Tools Series: Tiger·tec Gold Facts Geometry: Rhombus 55° Corner radius: 0.4 mm Free rake: 0° (negative) Chipbreaker: FM5 Plate size: 15 Plate thickness: 06 Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Grade: WMP20G Application: stainless steel Designation: DNMG150604-FM5 WMP20G Execution: G FAQ What materials is this insert intended for? This insert is optimised for stainless steel and performs under medium to robust cutting conditions typical for such materials. What does the FM5 chipbreaker provide? The FM5 chipbreaker on the DNMG150604-FM5 WMP20G improves chip control and evacuation, reducing chip-related interruptions during turning. How does the 0° negative rake affect cutting? A 0° negative rake increases edge robustness, which helps the insert resist chipping and maintain stable cutting when machining stainless steel. Is this grade suitable for finishing operations? Yes, the combination of WMP20G and the Rhombus 55° geometry offers a balance of edge strength and surface finish suitable for finishing and medium-duty roughing. What key geometry values should be considered when selecting this insert? Important parameters include the Rhombus 55° form, 0.4 mm corner radius, 0° negative rake and the FM5 chipbreaker, all of which influence tool behaviour and process stability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation and comparison. There is no affiliation between Metav Werkzeuge and the manufacturers named. The offered item is an original, factory-new product of the manufacturer Walter Tools.
DNMG150604-FM5 WMP20S WMP20S Wendeplatten - Walter Tools
Reliable chip control and a wear-resistant Tiger·tec Silver grade combine to deliver consistent performance when machining rostfreier Stahl; the FM5 chipbreaker and a 0.4 mm corner radius support stable cutting and improved surface quality. Order the insert directly via Metav Werkzeuge or request specialised application advice from their consultants. DNMG150604-FM5 WMP20S turning indexable insert — Tiger·tec Silver grade for rostfreier Stahl | Walter Tools The DNMG150604-FM5 WMP20S is a 55° rhombic turning indexable insert designed for medium to heavy-duty machining of rostfreier Stahl, featuring the Tiger·tec Silver coated grade and the FM5 chipbreaker for optimised chip control. Tiger·tec Silver grade WMP20S coating Optimised FM5 chipbreaker for rostfreier Stahl Rhombic 55° shape with 0.4 mm corner radius Robust negative clearance, stable cutting edge High-performance cutting for rostfreier Stahl with dependable chip control The combination of the Tiger·tec Silver coating and the WMP20S grade delivers enhanced wear resistance and thermal stability under the high temperatures typical of machining rostfreier Stahl. The insert’s FM5 chipbreaker is engineered to form and evacuate chips reliably during interrupted or continuous cuts, which reduces the risk of built-up edge and improves process stability. This results in fewer tool changes and a steadier cycle time, translating into measurable productivity gains for batch production of corrosion‑resistant components. Geometry and edge specification that improve surface integrity and tool life A Rhombic 55° geometry provides a favourable approach for general turning while maintaining rigidity at the cutting edge; the 0.4 mm corner radius supports a fine surface finish without sacrificing strength at the cutting tip. The 0° (negative) relief angle contributes to a robust, negative clearance that protects the cutting edge under heavy feed or interrupted cuts. Together these design elements help reduce vibration and contribute to consistent dimensional accuracy on shafts and profiles made from rostfreier Stahl. Practical advantages for workshop efficiency and process reliability The coated carbide construction and the optimised chip control of this insert reduce rework and improve part consistency in serial machining. As a Walter Tools product from the Tiger‑tec Silver family, the insert benefits from modern coating technology aimed at broad material coverage and extended life under demanding conditions. Specification details such as shape, chipbreaker type and corner radius facilitate straightforward tooling decisions when replacing inserts or configuring toolholders, supporting rapid setup and less downtime on the shop floor. For machining rostfreier Stahl with a focus on reproducible results and long edge life, consider the Walter Tools DNMG150604-FM5 WMP20S insert and contact Metav Werkzeuge for tailored application support via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: DNMG150604-FM5-WMP20S-WALTER Article no.: DNMG150604-FM5 Product: Turning indexable insert DNMG150604-FM5 WMP20S Walter Tools Brand: Walter Tools Series: Tiger·tec Silver Grade: WMP20S Chipbreaker: FM5 Shape: Rhombus 55° Tolerance class: M Facts Corner radius: 0.4 mm Insert size: 15 mm Thickness code: 06 Relief angle: 0° (negative) Shape angle: 55° Special features Coating / grade: Tiger·tec Silver, coated carbide Suitable for: rostfreier Stahl Optimised chip control: FM5 chipbreaker Geometry: Rhombic 55°, negative clearance Execution: G FAQ What materials is the DNMG150604-FM5 WMP20S suitable for? The DNMG150604-FM5 WMP20S is specified for rostfreier Stahl and is optimised to manage the toughness and heat generation typical of such alloys. How does the FM5 chipbreaker benefit the cutting process? The FM5 chipbreaker on the DNMG150604-FM5 WMP20S produces short, controllable chips when machining rostfreier Stahl, which improves evacuation and reduces the chance of built‑up edge. What effect does the Rhombic 55° shape have on machining performance? The Rhombic 55° geometry in the DNMG150604-FM5 WMP20S offers a stable cutting orientation that balances strength and accessibility for common turning operations, aiding dimensional control. Is the DNMG150604-FM5 WMP20S coated and what does that mean in practice? Yes; the DNMG150604-FM5 WMP20S uses the Tiger·tec Silver coating technology, providing enhanced wear resistance and thermal protection that extends edge life in demanding rostfreier Stahl applications. What surface finish can be expected with a 0.4 mm corner radius? A 0.4 mm corner radius on the DNMG150604-FM20S supports a fine surface finish while maintaining edge robustness, suitable for many finish and semi-finish turning tasks on rostfreier Stahl. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is an original factory‑new product of the manufacturer.
DNMG150604-FM5 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of a robust combination of cutting‑edge stability, reliable chip control and a geometry optimised for demanding stainless and heat‑resistant alloy machining; order the inserts directly via Metav Werkzeuge or consult their specialists for application advice and availability. DNMG150604-FM5 WSM01 — Indexable turning insert, Tiger‑tec Silver, rhombic 55° The DNMG150604-FM5 WSM01 is an indexable turning insert engineered for heavy‑duty machining of stainless steels and heat‑resistant superalloys, offering a robust cutting edge and predictable chip formation for industrial turning applications. Tiger‑tec Silver coated carbide for stability Specifically designed for stainless steels and alloys Rhombic 55° form with 0° negative rake FM5 chipbreaker for secure chip control Improved process reliability when machining stainless and superalloys The combination of the Tiger‑tec Silver coating and the WSM01 coated carbide grade delivers a significant improvement in cutting edge stability under high thermal and mechanical stress. This engineered coating supports secure chip formation and reduces the tendency for edge build‑up when working with tough, ductile materials such as stainless steels and nickel‑based superalloys. The result is a more consistent machining process, fewer interruptions for tool changes and a predictable component finish that helps maintain production throughput. Geometry tailored for consistent surface quality and tool robustness The rhombic 55° insert form with a 0° negative relief provides a geometry that blends versatility and strength. The 55° form allows effective engagement angles for turning operations while the negative relief increases edge support for interrupted cuts and heavy depths of cut. The 0.4 mm corner radius offers a balance between edge durability and achievable surface finish; this geometry is particularly suitable where reliable repeatability and dimensional control are required in serial production. Secure chip control and longer service intervals with FM5 Equipped with the FM5 chipbreaker, this insert is designed to control chip flow in demanding conditions, breaking and directing chips away from the cutting zone to reduce recutting and tool wear. The combination of chipbreaker design and the coated cemented carbide substrate contributes to improved tool life and more stable process windows. For shops running high volumes or dealing with difficult‑to‑machine alloys, this insert provides measurable advantages in reduced downtime and enhanced productivity. For tailored recommendations on Walter Tools' DNMG150604-FM5 WSM01 indexable turning inserts for stainless steel and superalloy applications, contact Metav Werkzeuge for expert consultation and prompt availability Technical data Article number: DNMG150604-FM5-WSM01-WALTER Label: Drehwendeschneidplatte DNMG150604-FM5 WSM01 Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Facts Insert size: 15 Thickness code: 06 Corner radius: 0.4 mm Relief angle: 0° (negative) Form: Rhombus 55° Tolerance class: M Special features Series: Tiger‑tec Silver Grade / Sort: WSM01 (coated carbide) Chipbreaker: FM5 Material suitability: S / M (heat‑resistant superalloys, stainless steels) Edge condition / execution: G ISO designation: DNMG150604-FM5 WSM01 FAQ What materials is this insert intended for? The DNMG150604-FM5 WSM01 indexable insert from Walter Tools is intended primarily for stainless steels and heat‑resistant superalloys, matching the WSM01 coated carbide grade and Tiger‑tec Silver series for secure chip formation. How does the insert geometry affect machining performance? The rhombic 55° form combined with a 0° negative relief increases edge support and tool robustness, enabling consistent surface quality and stable performance in heavy turning operations. What benefits does the FM5 chipbreaker provide? The FM5 chipbreaker controls chip flow to prevent long, entangling chips and to reduce recutting; this contributes to extended tool life and fewer process interruptions with the DNMG150604-FM5 WSM01 insert. Is the DNMG format compatible with standard toolholders? Yes, the DNMG150604-FM5 WSM01 follows the DNMG ISO form and is compatible with corresponding DNMG indexable turning toolholders designed for that insert shape. Which production scenarios benefit most from this insert? Applications involving interrupted cuts, heavy depths of cut or serial machining of ductile, heat‑generating materials such as stainless steels and superalloys will benefit from the insert’s stability and chip control. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the mentioned brands. The offered article is original and factory‑new.
DNMG150604-FM5 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver edge technology and the WSM10S grade for reliable machining of stainless steels and heat‑resistant alloys; the robust geometry and FM5 chipbreaker reduce cycle times and improve surface quality. Order original inserts via Metav Werkzeuge or consult the team for application advice. DNMG150604-FM5 WSM10S Turning insert — Tiger·tec Silver, for stainless steels and superalloys (Walter Tools) DNMG150604-FM5 WSM10S is a negative‑rake rhombic insert designed for demanding turning applications in stainless steels and heat‑resistant alloys Tiger·tec Silver coating for edge stability WSM10S grade for stainless and superalloys FM5 chipbreaker for controlled chip formation Rhombic 55° geometry with 0.4 mm nose radius Greater process security for difficult materials The combination of the WSM10S grade and Tiger·tec Silver coating offers improved thermal resistance and edge stability, specifically tuned for materials that tend to work‑harden or generate heat, such as stainless steels and nickel‑base alloys. This results in more consistent cutting forces and reduced risk of built‑up edge, which supports longer effective tool life and fewer unplanned interventions in production. The coated carbide substrate provides wear resistance while maintaining toughness where intermittent cutting or unstable conditions occur. Geometry and chip control that sustain productivity The rhombic 55° form and negative rake (0°) deliver a stable cutting interface that withstands high loads, while the FM5 chipbreaker promotes safe and repeatable chip segmentation. A 0.4 mm corner radius balances strength and surface finish, enabling reliable passes with minimal burr formation. For shop floors focused on cycle time and component quality, this geometry helps reduce insert indexing and rework by producing predictable chips and consistent surface integrity on each cut. Practical fit for standard toolholders and series performance The insert’s designation aligns with common turning systems, easing integration into existing toolholder inventories and minimising setup complexity. The technical specification—compact inscribed size and standard thickness code—supports frequent replacement without extensive tooling changes, contributing to steady throughput. As part of Walter Tools’ Tiger·tec Silver series, the insert benefits from the manufacturer’s focus on process reliability and consistent batch quality, aiding procurement decisions where repeatable outcomes are required. For application support or to source genuine Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge for tailored recommendations and prompt supply. Technical data Article number: DNMG150604-FM5-WSM10S-WALTER Designation: DNMG150604-FM5 WSM10S Manufacturer: Walter Tools Series: Tiger·tec Silver Data Insert size: 15 Corner radius: 0.4 mm Thickness code: 06 Relief angle: 0° (negative) Tolerance class: M Special features Grade: WSM10S Chipbreaker: FM5 Shape: Rhombus 55° Execution: G Material suitability: S / M (heat‑resistant alloys, stainless steels) FAQ What materials is this insert best suited for? The DNMG150604-FM5 WSM10S insert is optimised for stainless steels and heat‑resistant superalloys (grade WSM10S), where thermal resistance and stable chip formation are critical. How does the FM5 chipbreaker influence machining? The FM5 chipbreaker promotes controlled chip segmentation and evacuation, improving process stability and reducing the risk of entangling chips in turning operations. Can this insert be used in common DNMG toolholders? Yes, the DNMG150604 geometry matches standard DNMG holders; the insert integrates with existing tool systems designed for rhombic 55° inserts. What benefit does the Tiger·tec Silver technology provide? Tiger·tec Silver coating enhances thermal and abrasive wear resistance while maintaining toughness, resulting in longer edge life and reliable performance under elevated cutting temperatures. Is this an original Walter Tools product? This item is supplied as an original Walter Tools turning insert (DNMG150604-FM5 WSM10S) and is part of the Tiger·tec Silver family, ensuring factory specifications and consistent quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product designations are mentioned for explanation purposes only; there is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product from the manufacturer.
DNMG150604-FM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM20S grade for reliable chip control and stable cutting edges when machining stainless steel and heat-resistant superalloys; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. DNMG150604-FM5 WSM20S — turning insert, Tiger·tec Silver, Walter Tools A DNMG150604-FM5 WSM20S turning insert engineered for demanding turning operations on stainless steel and superalloys, offering robust edge stability and consistent chip formation Tiger·tec Silver coating for thermal resistance WSM20S grade for stainless steel and superalloys FM5 chipbreaker for controlled chips Rhombic 55° form with 0.4 mm corner radius High process reliability through thermal-stable coating The Tiger·tec Silver coating paired with the WSM20S grade improves resistance to thermal loading, which is critical when machining materials that generate high cutting temperatures. This combination supports stable chip formation and reduces the risk of premature edge wear. For production environments where consistency matters, the coating technology is designed to maintain cutting performance across longer tool life, resulting in fewer indexings and more predictable downtimes. Optimised geometry for controlled machining of tough materials The insert’s Rhombus 55° shape and FM5 chipbreaker deliver reliable chip control when turning ductile and work-hardenable alloys. The 0.4 mm corner radius helps distribute cutting forces and improves edge robustness during interrupted cuts or entry/exit conditions. These geometry features are particularly advantageous for machining stainless steel and high-temperature alloys, where chip evacuation and edge stability directly affect surface finish and component tolerances. Practical benefits for workshop productivity Designed for industrial turning operations, this indexable insert balances performance and adaptability. The negative rake (0° (negativ)) supports heavy cutting and interrupted cuts while the tolerance class M ensures consistent seating and repeatable positioning in the toolholder. The combination of grade, chipbreaker and form supports higher process security and contributes to steady production results, making it suitable for batch runs and component families that demand repeatable quality. Discuss machining requirements with Metav Werkzeuge to select the ideal Walter Tools DNMG150604-FM5 WSM20S configuration and ensure optimal cutting parameters; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DNMG150604-FM5-WSM20S-WALTER Product name: DNMG150604-FM5 WSM20S Manufacturer: Walter Tools Facts Insert form: Rhombus 55° Corner radius: 0.4 mm Size: 15 Thickness: 06 Relief angle: 0° (negative) Tolerance class: M Special features Grade: WSM20S Coating technology: Tiger·tec Silver Chipbreaker: FM5 Material compatibility: stainless steel; also suitable for materials in group S (superalloys, titanium) Series: Tiger-tec Silver Execution: G FAQ What materials is this insert suitable for? The DNMG150604-FM5 WSM20S turning insert is suitable for stainless steel and heat-resistant superalloys (material groups M and S), with the WSM20S grade optimised for thermal stability and edge life. How does the FM5 chipbreaker affect machining? The FM5 chipbreaker gives improved chip control and evacuation, supporting consistent surface quality and reducing the likelihood of built-up edge during turning operations with the Walter Tools insert. What is the benefit of the Tiger·tec Silver coating? Tiger·tec Silver provides enhanced thermal resistance and wear protection, extending tool life under higher cutting temperatures common when machining stainless steel and superalloys. Can the negative rake (0°) geometry be used for heavy cuts? Yes, the 0° (negative) relief supports heavier cuts and interrupted cutting conditions by increasing edge robustness and stability of the Walter Tools insert. Is the corner radius suitable for finishing passes? The 0.4 mm corner radius balances edge strength with the ability to achieve good surface finishes; for fine finishing, smaller radii or ground inserts may be considered depending on the application. How does the tolerance class M influence toolholder seating? Tolerance class M ensures repeatable insert positioning and consistent contact with the toolholder, which aids in achieving stable machining results and consistent part quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of Walter Tools. The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group.
DNMG150604-FP5 WEP10C Wendeplatten - Walter Tools
Take advantage of WEP10C cermet for fine finishing combined with a Rhombus 55° geometry and a 0.4 mm corner radius to maintain edge integrity and process stability; order directly via Metav Werkzeuge or consult our specialists for application-specific selection. DNMG150604-FP5 WEP10C — indexable turning insert by Walter Tools, cermet grade, Rhombus 55° DNMG150604-FP5 WEP10C is an indexable turning insert developed for precision finishing and stable cutting in general turning operations Cermet grade WEP10C for fine finishing Rhombus 55° geometry for versatile turning 0° negative rake for stable cutting 0.4 mm corner radius for edge integrity Improved surface quality with a cermet edge The use of WEP10C cermet places emphasis on a uniform cutting edge and consistent surface finish in finishing applications. Cermet materials combine ceramic and metallic properties to offer high hot hardness and good wear resistance, which supports longer cutting intervals and a reliable part finish. This insert's design targets a balance between dimensional stability and surface quality, while the manufacturer advice states that the exact material suitability should be checked in the product matrix to ensure optimal selection for the specific machining task. Geometry and edge design that stabilise the cut The Rhombus 55° shape together with a 0° (negative) rake provides a robust geometry that resists edge chipping and supports steady cutting conditions. A 0.4 mm corner radius helps distribute cutting forces over a larger area, reducing the likelihood of premature edge wear in light-medium interrupted cuts and fine finishing passes. These geometric choices are beneficial where consistent tool life and reproducible component tolerances are required, contributing to predictable cycle times and fewer insert changes. Controlled chip formation and process security Equipped with the FP5 chipbreaker and presented in the Walter Cermet series, this insert is oriented towards controlled chip flow and process reliability. The tolerance class M and execution code G indicate manufacturing precision and the intended mounting/execution variant. Together, these attributes support efficient chip control during finishing operations and help to maintain a stable machining process. For applications where catalogue-dependent specifications apply, please consult the product matrix to verify compatibility with the intended workpiece material. Discuss application requirements with Metav Werkzeuge for tailored recommendations on using the Walter Tools DNMG150604-FP5 WEP10C insert and arrange procurement or technical clarification through Metav Werkzeuge. Technical Data Article number: DNMG150604-FP5-WEP10C-WALTER Label: Drehwendeschneidplatte DNMG150604-FP5 WEP10C Walter Tools Series: Walter Cermet Sort: WEP10C Facts Plate form: Rhombus 55° Free angle: 0° (negative) Corner radius: 0.4 Plate size: 15 Plate thickness: 06 Tolerance class: M Special features Chipbreaker: FP5 Execution: G Base designation: DNMG150604-FP5 Product type: Drehwendeschneidplatte FAQ What kinds of turning operations suit this insert best? The DNMG150604-FP5 WEP10C insert from Walter Tools is designed for precision finishing and stable turning operations where fine surface quality and consistent edge life are priorities. Can the DNMG150604-FP5 WEP10C machine hardened materials? Material compatibility for the DNMG150604-FP5 WEP10C is catalogue-dependent; consult the Walter Cermet product matrix to confirm suitability for specific hardened or alloyed steels. How does the FP5 chipbreaker affect machining? The FP5 chipbreaker on this insert promotes predictable chip formation and improved chip evacuation, supporting process security and consistent surface results when used in recommended cutting conditions. Is the corner radius suitable for light interruption? The 0.4 mm corner radius contributes to edge strength and is appropriate for light to medium interrupted cuts and finishing passes, enhancing resistance to chipping under fluctuating loads. Which tolerance class is this insert manufactured to? This insert is produced to tolerance class M, indicating standardised dimensional precision for reliable seating and repeatable positioning in compatible toolholders. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; info@walter-tools.com The Walter Tools brand is a recognised name in precision tools and belongs to the Walter group. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150604-FP5 WKP01G Wendeplatten - Walter Tools
Combining the WKP01G grade, Tiger·tec Gold coating and the FP5 chipbreaker results in consistent edge stability, extended tool life and reliable chip control for turning of steel and cast iron; order the DNMG150604-FP5 WKP01G directly via Metav Werkzeuge or request advice from our consultants if further specification is required Drehwendeschneidplatte DNMG150604-FP5 WKP01G – Tiger·tec Gold, Walter Tools A DNMG150604-FP5 WKP01G turning insert engineered for robust medium-to-heavy turning applications on steel and cast iron, offering a balance of edge strength and process security Tiger·tec Gold coating for extended tool life WKP01G grade for steel and cast iron FP5 chipbreaker for reliable chip control Rhombic 55° insert with 0.4 corner radius Optimised performance and longer running times The combination of the Tiger·tec Gold coating and the WKP01G carbide grade provides a measurable improvement in wear resistance and run length. The advanced coating technology reduces adhesive and abrasive wear, which translates into fewer tool changes and more stable cycle times. For manufacturers aiming to increase uptime and maintain consistent tolerances, this solution delivers predictable tool life and improved process efficiency when machining steel and cast iron. The result is higher productivity with lower per-part tooling costs. Geometry and chip control adapted to industrial demands The rhombic 55° geometry together with the FP5 chipbreaker is designed to control typical turning chips for medium and heavier cuts; the insert features a 0° (negative) free rake and a 0.4 mm corner radius, which reinforces the cutting edge against mechanical and thermal loads. These geometric choices enable secure cutting at elevated feeds and depths while preserving surface integrity. The DNMG150604-FP5 WKP01G format and a plate thickness of 06 ensure stable clamping and repeatable performance across serial production runs, supporting consistent surface finish and dimensional accuracy. Practical benefits in workshop and production environments In daily use the insert's combination of a robust grade and a specialised chipbreaker reduces interruptions caused by poor chip evacuation and edge wear, improving machining throughput and quality assurance. The FP5 chip geometry simplifies chip guidance for both automatic and manual setups, cutting down on post-process handling and rework. For guidance on selecting the correct insert for a specific turning task or for optimisation of cutting parameters, our technical advisors are available to assist. For additional technical information or questions regarding application limits, please contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Choose Walter Tools Tiger·tec Gold inserts for robust turning performance and contact Metav Werkzeuge for ordering and application support — Metav Werkzeuge provides expert advice and fast delivery options Technical Data Article number: DNMG150604-FP5-WKP01G-WALTER Label: Drehwendeschneidplatte DNMG150604-FP5 WKP01G Walter Tools Manufacturer: Walter Tools Facts Size designation: 15 Plate thickness: 06 Corner radius: 0.4 mm Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WKP01G (coated carbide) Chipbreaker: FP5 Plate form: Rhombus 55° Free angle: 0° (negative) Material application: P / K (steel and cast iron) Execution: G FAQ What materials is this insert suited for? The DNMG150604-FP5 WKP01G is suited for machining steel and cast iron, as indicated by the P / K designation and the WKP01G grade. How does the Tiger·tec Gold coating help in production? The Tiger·tec Gold coating on the insert increases wear resistance and reduces edge breakdown, which leads to longer tool life and more consistent machining cycles. What cutting situations benefit most from the FP5 chipbreaker? The FP5 chipbreaker performs well in medium to heavier turning operations, offering reliable chip control and safer evacuation in both semi-finishing and finishing passes. Is the insert geometry suitable for heavy interrupted cuts? Yes, the rhombic 55° shape with a 0.4 mm corner radius and a 0° negative rake provides enhanced edge strength for interrupted and heavier cutting conditions. Can this insert be used in automated production with high feeds? The combination of the WKP01G grade and the FP5 chipbreaker is designed to provide process security under elevated feed and depth conditions, making it suitable for many automated applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
DNMG150604-FP5 WPP10G G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the FP5 chipbreaker and a compact 0.4 mm corner radius to achieve stable chip control and extended tool life in steel turning. The DNMG150604-FP5 WPP10G offers reliable performance for productive machining; order this insert directly via Metav Werkzeuge or consult the technical team for tailored cutting data. DNMG150604-FP5 WPP10G Drehwendeschneidplatte – Tiger·tec Gold, for Steel (Walter Tools) The DNMG150604-FP5 WPP10G is a negative-geometry turning insert designed for precision steel machining, combining a robust chipbreaker with a Tiger·tec Gold coated carbide for consistent performance in production environments Tiger·tec Gold coated for long tool life FP5 chipbreaker for controlled chips Rhombus 55° shape for versatile turning 0.4 mm corner radius for fine finish Stable chip control and longer tool life for steel turning Equipped with the FP5 chipbreaker and the Tiger·tec Gold coating, this indexable insert delivers stable chip formation and improved wear resistance when machining steel. The coated carbide substrate reduces flank and crater wear by providing a durable cutting edge; this means fewer interruptions for insert changes and more predictable component tolerances. The chipbreaker geometry is configured to promote short, segmented chips under typical steel cutting conditions, which supports safer swarf management in automated and manual turning operations. Geometry tuned for surface quality and repeatability The negative 0° rake and 0.4 mm corner radius combine to produce a reliable cutting edge that resists edge chipping while enabling good surface finish on turned parts. The Rhombus 55° form provides access to a wide range of external turning profiles and is particularly suitable where a compact insert seat is required. The M tolerance class ensures dimensional consistency between inserts, contributing to repeatable set-ups and reduced rework. Overall, the geometry supports controlled tool engagement and consistent part quality in medium-to-finish turning. Practical application notes and machining clarity for steel Designed specifically for steel according to ISO 513, this insert is intended for the typical thermal and mechanical demands of cutting unalloyed and alloyed steels. The coated carbide construction balances hardness and toughness to suit a range of cutting speeds and feed rates commonly used in general turning. For shops seeking process stability, the combination of coating and chipbreaker reduces the likelihood of premature wear and improves machining consistency. For specific cutting parameters and optimisation, refer to machine capability and workpiece specifications or contact technical support for tailored advice. Contact Metav Werkzeuge for expert guidance on Walter Tools inserts, cutting-data recommendations and availability — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data Article number: DNMG150604-FP5-WPP10G-WALTER Product name: DNMG150604-FP5 WPP10G Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Gold Numbers / Core Technical Data Size: 15 mm Thickness: 6 mm Corner radius: 0.4 mm Free angle: 0° (negative) Tolerance class: M Designs / Special features Chipbreaker: FP5 Grade: WPP10G Substrate/coating: coated carbide (Tiger·tec Gold) Insert form: Rhombus 55° Execution: G Designation: DNMG150604-FP5 Suitable material group: steel (ISO 513) FAQ What materials is this insert suitable for? The DNMG150604-FP5 WPP10G is specified for machining steel according to ISO 513 and is optimised for the thermal and chip-formation characteristics of unalloyed and alloyed steels. How does the FP5 chipbreaker affect machining? The FP5 chipbreaker on this Walter Tools insert promotes short, controllable chips and supports safer swarf handling while maintaining consistent cutting forces during steel turning. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating increases wear resistance and thermal stability; in practical terms, the coating extends tool life and helps maintain surface quality under typical turning conditions. Is this insert suitable for finishing operations? With a 0.4 mm corner radius and negative 0° geometry, the insert is well suited to medium-to-finish turning where a balance of edge strength and surface finish is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns.
DNMG150604-FP5 WPP20G WPP20G Wendeplatten - Walter Tools
The combination of a Tiger·tec Gold coating and the WPP20G grade ensures long tool life and consistent performance in steel turning, while the FP5 chipbreaker guarantees predictable chip formation for stable production. Order through Metav Werkzeuge or consult the technical team for tailored cutting data and application advice. DNMG150604-FP5 WPP20G — Turning insert for steel, Walter Tools The DNMG150604-FP5 WPP20G is a coated carbide indexable insert designed for general steel turning applications, offering robust chip control and reliable edge life. Tiger·tec Gold coating for extended tool life Universal WPP20G grade for steel machining FP5 chipbreaker for stable chip control Rhombic 55° geometry with 0.4 mm corner radius Reliable performance in ISO P (steel) machining The combination of the Tiger·tec Gold coating and the WPP20G grade delivers a wear-resistant, coated carbide solution optimised for the thermal and mechanical demands of steel machining (ISO P). The coating reduces flank wear and improves resistance to built-up edge, which translates into longer intervals between indexings and less downtime. This insert’s construction supports consistent cutting-edge behaviour, enabling predictable component quality and process throughput in both batch and continuous production. Predictable chip control and surface finish Equipped with the FP5 chipbreaker and a rhombic 55° form, the insert provides controlled chip formation and evacuation, reducing the risk of entanglement and machine stoppages. The 0° (negative) free angle increases edge strength, making the geometry particularly suited to interrupted cuts and unstable setups. Together, chip control and robust geometry contribute to improved surface integrity and repeatable dimensional results, which supports tighter process windows and fewer rework cycles. Robust geometry for repeatable productivity The medium tolerance class M, combined with a 0.4 mm corner radius and a plate thickness of 06, creates a balanced profile between strength and detail. The insert’s shape and dimensions support secure clamping and straightforward indexing, helping to maintain machining consistency across multiple tool life stages. The indexable design reduces tool-change complexity and allows economical use of the insert’s multiple cutting edges, improving overall productivity and lowering cost per component. Practical integration and application guidance This indexable insert is intended primarily for steel applications and is a versatile choice for manufacturers seeking a reliable, universal carbide grade. For best results, pair the insert with appropriate turning holders that match the DNMG geometry and follow supplier-recommended speeds and feeds for the specific steel grade. For assistance in selecting holder combinations or optimising cutting parameters for individual operations, Metav Werkzeuge’s technical advisers can supply cutting data and application-specific recommendations. Discuss application requirements and request customised cutting data from Metav Werkzeuge to make the most of the WPP20G Tiger·tec Gold insert — contact the Metav Werkzeuge technical team by email or phone Technical data Article number: DNMG150604-FP5-WPP20G-WALTER ISO designation: DNMG150604-FP5 WPP20G Grade/Sort: WPP20G Series: Tiger-tec Gold Manufacturer: Walter Tools Product type: Turning insert Core specifications Plate form: Rhombic 55° Plate size: 15 Plate thickness: 06 Corner radius: 0.4 mm Chipbreaker: FP5 Free angle: 0° (negative) Tolerance class: M Features and compatibility Coating: Tiger·tec Gold (coated carbide) Material suitability: Steel (ISO P) Design: Indexable insert for turning Application focus: General-purpose steel machining FAQ What materials is this insert suitable for? The WPP20G grade and Tiger·tec Gold coating make this DNMG150604-FP5 insert particularly suitable for machining steel (ISO P), offering balanced wear resistance and toughness for a wide range of steel grades. How does the FP5 chipbreaker affect machining? The FP5 chipbreaker on the DNMG150604-FP5 provides controlled chip formation and evacuation, improving process stability and reducing the likelihood of chip-related interruptions during turning operations. What geometry and edge preparation does the insert have? This insert features a rhombic 55° form, a 0.4 mm corner radius and a 0° (negative) free angle, delivering a robust edge for interrupted cuts and reliable surface quality. How precise is the insert and what are its indexing benefits? With tolerance class M and the indexable DNMG format, the insert ensures repeatable mounting accuracy and economical use of multiple cutting edges for consistent production results. Manufacturer: Walter Tools; The Walter AG (brand: Walter Tools) with headquarters in Tübingen is part of the Sandvik Group. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150604-FW5 WKP01G WKP01G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the FW5 chipbreaker for consistent chip control and long cutting-edge life; the rhombic 55° geometry with a 0° negative rake ensures stable performance in steel and cast iron turning. Order the inserts via Metav Werkzeuge or consult our specialists for application support. DNMG150604-FW5 WKP01G – Turning insert, Tiger·tec Gold, for steel & cast iron by Walter Tools DNMG150604-FW5 WKP01G is a high-performance indexable turning insert for medium to finishing operations in steel and cast iron. Tiger·tec Gold coating for long tool life Precise rhombic 55° geometry FW5 chipbreaker for controlled chips Suitable for steel (P) and cast iron (K) Higher productivity through durable coating and optimised grade The combination of the Tiger·tec Gold coating and the WKP01G carbide grade delivers measurable productivity gains in serial turning. The coated hardmetal offers improved wear resistance and heat management, which translates into longer tool life and more consistent component dimensions under production loads. For operations involving unalloyed and alloyed steel as well as cast iron, the insert maintains a stable cutting edge and predictable tool-change intervals, supporting throughput planning and reducing unexpected downtime. Stable chip control and reliable geometry for consistent finishes The FW5 chipbreaker is engineered for secure chip segmentation and evacuation, reducing the risk of built-up edge and surface damage. The insert’s rhombic 55° shape and 0° negative rake provide a robust cutting geometry that resists vibration in interrupted cuts and maintains edge strength during heavy cross-section cuts. The corner radius 0.4 mm helps achieve good surface quality on finishing passes while preserving tool life; the geometry works effectively across typical turning feeds and depths, simplifying process parameter selection. Process security, material coverage and application guidance As part of the Tiger·tec Gold series, this insert supports a broad material spectrum classified as P/K under ISO 513, meaning it is suited for conventional steel machining and abrasive cast iron applications. The Walter Tools grade emphasises repeatable performance and stable chip formation, making it a pragmatic choice for workshops seeking reproducible results. If application details require fine-tuning—for example, recommended speeds, feeds or holder selection—Metav Werkzeuge provides technical advice and material-specific recommendations to integrate the insert into existing turning processes effectively. Contact Metav Werkzeuge for tailored application advice and availability of Walter Tools DNMG150604-FW5 WKP01G turning inserts Technical data SKU: DNMG150604-FW5-WKP01G-WALTER Designation: DNMG150604-FW5 ISO designation: DNMG150604-FW5 WKP01G Manufacturer: Walter Tools Core dimensions Inscribed circle: 15 mm Corner radius: 0.4 mm Thickness code: 06 Relief angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WKP01G (coated carbide) Chipbreaker: FW5 Geometry: Rhombic 55° Material suitability: steel (P) and cast iron (K) Execution: G FAQ What materials are best machined with this insert? The DNMG150604-FW5 WKP01G by Walter Tools is designed for machining steel (P) and cast iron (K), covering typical alloyed and unalloyed steels and abrasive cast components. What is the main benefit of the Tiger·tec Gold coating? Tiger·tec Gold on the WKP01G grade enhances wear resistance and thermal stability, which increases tool life and maintains cutting-edge integrity under continuous operation. How does the FW5 chipbreaker affect machining? The FW5 chipbreaker provides controlled chip formation and evacuation, reducing the risk of surface damage and facilitating reliable high-volume production cycles. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools) is a leading manufacturer of precision cutting tools and is part of the Sandvik Group. Protected trademarks and trade names belong to their respective owners and are mentioned for explanation only. There is no affiliation between Metav Werkzeuge and the trademark owners. The offered article is an original, factory-new product of the manufacturer.
DNMG150604-FW5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the high wear resistance and consistent chip control of a Tiger·tec Gold grade combined with a secure negative geometry for stable turning results; order directly via Metav Werkzeuge or contact our consultants for application advice. Indexable Turning Insert DNMG150604-FW5 WPP10G — Steel, Tiger·tec Gold (Walter Tools) The DNMG150604-FW5 WPP10G indexable turning insert is a rhombic 55° insert designed for machining steel, combining a Tiger·tec Gold coated carbide grade with an FW5 chipbreaker for reliable chip control. Tiger·tec Gold coated grade WPP10G Optimised FW5 chipbreaker for steel Rhombic 55° insert with 0.4 mm corner Negative 0° relief for secure cutting High-performance coated grade for extended tool life The combination of Tiger·tec Gold technology and the WPP10G grade delivers a coated carbide solution that balances wear resistance and toughness for steel applications. This insert is engineered to withstand the thermal and mechanical stresses typical of turning operations in the ISO P material group. The advanced coating reduces abrasive wear and maintains a stable cutting edge, which in turn decreases the frequency of index changes and contributes to a more economical machining process. Geometry and chip control that stabilise cutting conditions The rhombic 55° shape and FW5 chipbreaker ensure predictable chip formation and evacuation when turning steels. With a 0.4 mm corner radius and a negative 0° relief angle, the geometry provides secure cutting behaviour and reduced vibration in interrupted cuts. These features make the insert suitable for a range of turning tasks where reliable chip control and low tool chatter are required, helping to protect the toolholder and workpiece finish. Versatile performance across steel machining applications The WPP10G grade is tailored for steel (ISO P) and offers a mix of properties that support productive machining across several application profiles — from more wear-resistant to universally reliable and tougher cutting conditions. The insert’s tolerance class M and the stable coating strategy contribute to consistent batch-to-batch results and predictable tool life. For operations prioritising steady productivity and surface quality, this solution reduces process variability and supports more efficient cycle planning. Practical integration and process benefits Integrating this insert into an existing turning setup is straightforward: the familiar DNMG150604-FW5 format fits common toolholders, while the chipbreaker and negative geometry reduce rework and improve first-pass yields. Operators will benefit from fewer interruptions for insert changes and improved handling of steel swarf. For production environments, the result is a measurable improvement in throughput combined with longer intervals between tool system maintenance. Choose Walter Tools’ Tiger·tec Gold quality — contact Metav Werkzeuge for tailored cutting data, availability and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DNMG150604-FW5-WPP10G-WALTER Product type: Drehwendeschneidplatte (indexable turning insert) Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP10G Facts Insert size: 15 mm Corner radius: 0.4 mm Relief angle: 0° (negative) Insert form angle: 55° Thickness code: 06 Tolerance class: M Special features Coated carbide grade WPP10G (Tiger·tec Gold) Chipbreaker type FW5 Suitable for steel (ISO P) Rhombic 55° insert shape Negative geometry for secure engagement FAQ What materials is this insert intended for? This insert is specified for machining steel (ISO P); the DNMG150604-FW5 WPP10G from Walter Tools is optimised for typical steel heat and chip formation. How does the FW5 chipbreaker affect machining? The FW5 chipbreaker promotes controlled chip formation in steel turning, improving evacuation and reducing the risk of entanglement and workpiece marking. Is the insert coated and what are the benefits? Yes — the Tiger·tec Gold coating on the WPP10G grade enhances wear resistance and edge stability, prolonging service life under steel cutting conditions. Which insert geometry suits interrupted cuts or grooving? The negative 0° relief and rhombic 55° form give this insert secure engagement and resistance to impact, which is advantageous in interrupted cuts or challenging profiles. Can this insert be used in automated production environments? The consistent coating performance and tolerance class M make the insert reliable for repetitive production cycles, helping to reduce tool changes and downtime. Manufacturer: Walter Tools / Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
DNMG150604-FW5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of high process security, Tiger·tec Gold performance and a versatile FW5 chipbreaker for consistent results in steel machining; order directly from Metav Werkzeuge or consult our specialists for cutting data and recommendations. DNMG150604-FW5 WPP20G turning insert — Walter Tools, Tiger·tec Gold, for steel machining DNMG150604-FW5 WPP20G is a coated turning insert designed for efficient machining of steel components, offering robust edge life and reliable chip control in general turning applications Tiger‑tec Gold coating technology WPP20G grade for steel machining FW5 chipbreaker for controlled chip flow Rhombic 55° shape with 0.4 mm nose radius Improved productivity for steel turning thanks to optimised grade and coating The combination of a coated carbide substrate with Tiger·tec Gold technology delivers a balance of wear resistance and toughness that is tailored to ISO P materials. The WPP20G grade is formulated for the thermal and chip-formation characteristics typical of steel, which supports longer tool life and more stable cutting parameters. For workshops aiming for predictable tool change intervals and reduced rework, this turning insert translates material‑specific performance into measurable production benefits. Precise geometry and chip control for consistent surface quality Built in a Rhombic 55° geometry with a 0.4 mm nose radius and a negative 0° rake, the insert provides a robust cutting edge that resists chipping during interrupted cuts while still enabling fine finishing where required. The integrated FW5 chipbreaker promotes controlled chip flow at common cutting depths for steel, reducing the risk of entanglement and improving process safety. These geometric choices support reliable surface quality with fewer passes and predictable dimensional stability. Easy integration and predictable handling in mixed production With a standard designation and format consistent for conventional toolholders, the turning insert features a size 15 form and thickness 06, enabling straightforward replacement and inventory management. The negative execution (G) and tolerance class M align the part with common workshop practices, simplifying setup and reducing the need for modified machining strategies. For operations that handle a range of steels, the insert’s universality reduces tool variants while maintaining performance across typical turning tasks. For tailored cutting data or to request a specification sheet for the Walter Tools DNMG150604-FW5 WPP20G turning insert, contact Metav Werkzeuge for expert guidance and fast supply coordination. Technical data SKU: DNMG150604-FW5-WPP20G-WALTER Product type: Drehwendeschneidplatte Brand: Walter Tools Series: Tiger-tec Gold Grade: WPP20G Designation: DNMG150604-FW5 WPP20G Core specifications Plate size: 15 Thickness: 06 Corner radius: 0.4 Free angle: 0° (negativ) Tolerance class: M Features / applications Coating: Tiger·tec Gold Chipbreaker: FW5 Shape: Rhombus 55° Applicable material: Steel (ISO P) Execution: G FAQ What materials is this insert suitable for? The DNMG150604-FW5 WPP20G insert is developed for machining steel (ISO P) and is optimised for the thermal and chip-formation behaviour of unalloyed and alloyed steels. How does the FW5 chipbreaker influence chip control? The FW5 chipbreaker on this insert promotes controlled chip formation at common cutting depths for steel, improving evacuation and reducing the likelihood of chip entanglement. Is this insert suitable for interrupted cuts? The negative rake design and robust geometry of the DNMG150604-FW5 provide resistance to edge chipping, making the insert appropriate for operations with moderate interruptions. What finish can be expected with the 0.4 mm radius? A 0.4 mm nose radius supports fine surface finishes while maintaining strength for light to medium turning passes, balancing quality and edge life. Which series and coating are applied to this grade? The insert belongs to the Tiger·tec Gold series and uses the corresponding coating technology, which enhances wear resistance and process stability when machining steel. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
DNMG150604-FW5 WSM20S WSM20S Wendeplatten - Walter Tools
High heat resistance and a stable cutting edge ensure consistent performance in demanding turning operations. Benefit from controlled chip formation and reliable wear resistance; order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. DNMG150604-FW5 WSM20S — Turning insert with Tiger·tec Silver coating by Walter Tools The DNMG150604-FW5 WSM20S is a coated carbide turning insert designed for machining stainless steel and heat‑resistant alloys in demanding production environments Tiger·tec Silver coating for heat resistance WSM20S grade for stainless steel and superalloys Rhombic 55° shape with 0.4 mm corner radius FW5 chipbreaker for secure chip control High-performance grade and coating for difficult-to-cut alloys The combination of the WSM20S grade and the Tiger·tec Silver coating provides enhanced heat resistance and wear protection for sustained cutting at elevated temperatures. This engineered coating system supports a stable cutting edge, reducing the tendency for built-up edge when machining stainless steel and heat‑resistant superalloys. As a result, cycle times remain consistent and component quality is maintained over longer tool life, offering measurable improvements in process reliability and part repeatability. Geometry and chip control that protect the cutting edge The rhombic 55° geometry paired with a 0.4 mm corner radius and the FW5 chipbreaker delivers predictable chip formation and secure evacuation under varying depths of cut. The negative 0° relief geometry (designation G) increases edge robustness for interrupted cuts and heavy engagement, while the chipbreaker design minimises vibration and promotes continuous production with fewer tool changes. These geometric choices translate directly into reduced downtime and improved surface finish in serial turning tasks. Practical integration for productive turning cycles As an indexable insert, the DNMG150604-FW5 WSM20S fits standard toolholders for economical tool management and fast index changes. The tolerance class M and defined plate dimensions simplify tool set-up and repeatability in production runs. With proven performance from Walter Tools, the insert supports reproducible results and straightforward inventory control, making it a pragmatic option for shops seeking to balance performance with operational efficiency. For demanding machining of stainless steel and superalloys, specify Walter Tools Tiger·tec Silver inserts like the DNMG150604-FW5 WSM20S and contact Metav Werkzeuge for tailored application advice and prompt supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number / SKU: DNMG150604-FW5-WSM20S-WALTER Designation: DNMG150604-FW5 WSM20S Brand: Walter Tools Series: Tiger·tec Silver Numbers / Core technical data Plate size: 15 Thickness: 06 Corner radius: 0.4 Relief angle: 0° (negative) Tolerance class: M Designs / Special features Coating: Tiger·tec Silver Grade: WSM20S (coated carbide) Chipbreaker: FW5 Shape: Rhombic 55° Material suitability: stainless steel (M), heat‑resistant superalloys/titanium (S) Geometry: G (negative) FAQ Which materials is this insert intended for? The DNMG150604-FW5 WSM20S insert from Walter Tools is formulated for stainless steel (ISO group M) and heat‑resistant superalloys/titanium (ISO group S) where heat resistance and edge stability are critical. What benefit does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating increases thermal resistance and reduces abrasive wear, enabling the WSM20S grade to sustain cutting conditions that would accelerate wear on uncoated grades. How does the FW5 chipbreaker influence machining? The FW5 chipbreaker promotes controlled chip formation and reliable evacuation, improving surface finish and reducing the risk of chip entanglement during continuous turning operations. Is the rhombic 55° geometry suitable for finishing passes? The rhombic 55° geometry with a 0.4 mm corner radius provides a good balance between edge strength and access to tight contours, making it appropriate for semi‑finishing and certain finishing applications depending on cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Walter Tools and other brand names mentioned are the property of their respective owners and are used here for identification and explanatory purposes only. There is no affiliation implied between Metav Werkzeuge and the mentioned brands. The item offered is an original, factory‑new product from the stated manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com