DNMG150604-MM5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a precise rhombic 55° geometry for reliable stainless steel turning under medium to robust conditions; the WMP20G grade supports stable chip formation and extended edge life. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. DNMG150604-MM5 WMP20G turning insert — Tiger·tec Gold (Walter Tools) The DNMG150604-MM5 WMP20G is a rhombic 55° turning insert optimised for machining stainless steel under medium to robust cutting conditions, offering a coated carbide grade designed for secure chip control and repeatable performance. Tiger·tec Gold coating for improved wear resistance Optimised for stainless steel (ISO M) machining Rhombic 55° profile with 0.4 mm nose radius Negative 0° lead angle for stable cutting Reliable performance for stainless steel turning The WMP20G grade is a coated carbide developed within the Tiger·tec Gold technology and is specifically intended for machining stainless steel (ISO group M). This grade supports a controlled interaction between the cutting edge and tough, work-hardened materials that commonly occur with austenitic and duplex stainless steels. As a result, the tool helps to reduce the risk of built-up edge and minimise thermal damage to the workpiece. The combination of grade and chipbreaker improves process reliability and supports consistent cycle times in serial production. Wear resistance and process security that improves productivity A coated substrate provides enhanced wear resistance compared with uncoated grades; in this case, the insert’s coated carbide construction and the MM5 chipbreaker promote stable chip formation and predictable flank wear. Stable edge behaviour reduces interruptions from rework or tool changes and contributes to higher machine utilisation. For machining environments with fluctuating cutting conditions, the insert’s specification is oriented towards maintaining cutting performance over longer tool life, delivering tangible benefits in daily production processes. Geometry built for precision and controlled cutting The insert’s rhombic 55° outline and 0.4 mm nose radius create a balance between accuracy and strength: the geometry enables fine surface finishes while retaining sufficient edge toughness for intermittent cuts. The negative 0° lead supports robust engagement and reduces the tendency for chatter in heavier cuts. The plate size (15) and thickness code (06) suit standard turn-holding systems and allow straightforward indexing when the cutting edge requires renewal, helping to maintain consistent component tolerances across repeat runs. Practical integration and handling in the workshop Designed as an indexable turning insert, this variant offers straightforward integration into conventional toolholders that accept the DNMG style. The DNMG150604-MM5 form factor and the MM5 chip control geometry support secure chip evacuation in many stainless steel turning tasks, from semi-finishing to more demanding turning operations. The combination of geometry, grade and series characteristics ensures compatibility with established machining processes and simplifies tool inventory for operations focused on rostfreier Stahl. For consistent stainless steel performance and application guidance on the DNMG150604-MM5 WMP20G, contact Metav Werkzeuge for a technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability and availability Technical data SKU: DNMG150604-MM5-WMP20G-WALTER Designation: DNMG150604-MM5 WMP20G Type: turning insert Series: Tiger·tec Gold Manufacturer: Walter Tools Core data Shape: Rhombic 55° Nose radius: 0.4 mm Lead angle: 0° (negative) Size: 15 Thickness code: 06 Chipbreaker: MM5 Tolerance class: M Materials & features Coating: WMP20G (Tiger·tec Gold) Substrate: coated carbide Suitable for: stainless steel (ISO M) Grade/finish: G Application: medium to robust cutting conditions FAQ What materials is this insert suitable for? This insert is specified for stainless steel (ISO M); the WMP20G grade and Tiger·tec Gold coating are tailored to handle the toughness and heat generation typical of these materials. How does the Tiger·tec Gold coating benefit the machining process? The Tiger·tec Gold coating on the WMP20G grade increases wear resistance and contributes to consistent edge life, which supports longer intervals between indexing and steadier process output with Walter Tools inserts. What role does the MM5 chipbreaker play in cutting performance? The MM5 chipbreaker is engineered for controlled chip formation during turning; when combined with the DNMG150604-MM5 geometry it improves chip control and reduces the risk of entanglement in stainless steel operations. Is this insert intended for finishing or roughing cuts? The geometry and grade suit medium to robust cutting conditions; the 0.4 mm nose radius and rhombic 55° profile allow for precise finishes while the negative lead and coated substrate support tougher, more demanding cuts. Which features ensure repeatable dimensional accuracy? The rhombic 55° form and consistent coating/substrate combination provide repeatable edge behaviour and reliable indexing, helping to maintain component tolerances across production batches. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and brand names remain the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only. The offered item is an original, factory-new product from the manufacturer.
DNMG150604-MM5 WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and a stable MM5 chipbreaker for reliable stainless-steel turning; the insert’s rhombic 55° form and 0° negative rake deliver predictable cutting forces and long tool life. Order directly via Metav Werkzeuge or request application advice from our consultants. DNMG150604-MM5 WMP20S – Indexable turning insert with Tiger·tec Silver coating for stainless steel (Walter Tools) DNMG150604-MM5 WMP20S is an indexable turning insert optimised for machining stainless steel in medium to robust cutting conditions, featuring a rhombic 55° geometry and a stable chip control design. Tiger·tec Silver coating for stainless steel Rhombic 55° geometry, 0.4 mm corner radius Negative 0° rake for stable cutting Precision and process stability for stainless-steel turning The indexable turning insert is engineered to address the typical challenges of stainless-steel machining: work-hardening, built-up edge and elevated temperatures. The WMP20S grade, part of the Tiger·tec Silver family, combines a wear-resistant coated carbide substrate with an optimised chipformer to promote secure chip control and reduced edge degradation. This results in more consistent cycle times and fewer interruptions for edge changes. The rhombic 55° shape and the modest 0.4 mm corner radius balance edge strength with the capability to achieve good surface finishes in medium-duty turning operations. Coating and grade that support repeatable results The multilayer Tiger·tec Silver coating enhances thermal resistance and reduces adhesive wear when cutting austenitic and other stainless steels. Compared with uncoated grades, this coating improves tool life under interrupted cuts and higher cutting temperatures. The WMP20S carbide grade is tuned specifically for the M material group, so it supports stable chip formation and predictable wear behaviour, which simplifies process qualification and reduces scrap rates during production runs. Geometry and chip control that reduce downtime The insert’s MM5 chipbreaker is designed to produce short, controllable chips across a range of cutting depths and feeds commonly used in shop-floor turning. The rhombic 55° form provides secure seat engagement in standard toolholders and enables versatile approach angles for both light finishing and heavier turning passes. The 0° negative rake increases cutting-edge stability, helping to avoid chatter and maintain dimensional consistency on shafts and bores. Together, these features promote longer tool life and fewer insert indexings per batch. Practical integration and measurable benefits Installation is straightforward in holders compatible with DNMG-format inserts; the flat seating face and secure clamping ensure repeatable positioning. Using this insert in a structured production setting typically yields benefits in process reliability: lower rework rates thanks to stable edge condition, and extended intervals between indexings. For production planners the controlled performance of the WMP20S grade supports reliable cycle-time estimates and predictable tool-change schedules, which aids capacity planning and cost accounting. Contact Metav Werkzeuge for bespoke application advice, availability and batch logistics for the Walter Tools DNMG150604-MM5 WMP20S insert; reach us by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: DNMG150604-MM5-WMP20S-WALTER Designation: DNMG150604-MM5 WMP20S Manufacturer: Walter Tools Facts Insert shape: Rhombic 55° Corner radius: 0.4 mm Free rake angle: 0° (negative) Chipbreaker: MM5 Plate size: 15 Plate thickness: 06 Special features Series: Tiger·tec Silver Grade: WMP20S (coated carbide) Material application: stainless steel (M) Execution: G FAQ Is this insert suitable for stainless-steel turning? Yes. The DNMG150604-MM5 WMP20S insert is specifically designed for machining stainless steels and the WMP20S grade supports secure chip formation and heat resistance. What advantages does the Tiger·tec Silver coating offer? The Tiger·tec Silver coating on the WMP20S grade improves thermal stability and reduces adhesive wear, resulting in longer tool life and more consistent edges when cutting stainless steel. Which chipbreaker is fitted and what is its effect? The insert uses an MM5 chipbreaker, which produces short, controllable chips across common feeds and depths, reducing the risk of entanglement and improving process reliability. Can the insert be used for finishing passes? Yes. With its rhombic 55° form and 0.4 mm corner radius, the insert can achieve good surface quality on finishing passes while retaining sufficient edge strength for medium-duty work. What does the 0° negative rake mean for machining? A 0° negative rake increases edge robustness and reduces the tendency to vibrate under heavier cuts, improving dimensional stability in turning operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; www.walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150604-MM5 WSM10S WSM10S Wendeplatten - Walter Tools
Reliable, predictable machining of stainless steel and heat‑resistant alloys is achieved through the combination of the WSM10S Tiger·tec Silver coating, the MM5 chipbreaker and the stable rhombic geometry — order the insert directly via Metav Werkzeuge or consult the technical team for application support. DNMG150604‑MM5 WSM10S – Indexable Turning Insert for stainless steel & Superalloys by Walter Tools The DNMG150604‑MM5 WSM10S is a rhombic 55° indexable turning insert designed for secure chip control and edge stability in stainless steels and heat‑resistant superalloys. Tiger·tec Silver coated carbide grade WSM10S Rhombic 55° form with 0.4 mm corner radius Negative 0° rake for stable cutting performance Optimised MM5 chipbreaker for secure chip control High performance for demanding materials The Tiger·tec Silver grade WSM10S offers a coated carbide substrate formulated for machining challenging materials such as stainless steel and superalloys. The combination of a wear‑resistant coating and a geometry tuned for thermal stability reduces flank wear and supports predictable tool life under elevated cutting temperatures. As a result, the insert allows for consistent cycle times and lowers the risk of unexpected rework when processing tough, high‑alloy components. Stable cutting edge for secure, repeatable results The rhombic 55° insert shape, the 0.4 mm corner radius and the 0° (negative) relief angle form a geometry that prioritises edge robustness and resistance to chipping. This setup is particularly effective for interrupted cuts and heavier feed applications where edge integrity determines part quality. The negative rake enables conservative engagement angles that protect the cutting edge, delivering repeatable dimensional accuracy in series production. Reliable chip control and process security Featuring the MM5 chipbreaker, the insert manages chip formation to reduce build‑up at the cutting edge and to ease evacuation in both continuous and semi‑continuous turning operations. Stable chip formation lowers the chance of surface damage and improves operator safety at higher material removal rates. The grade and chipbreaker combination increases process security and supports higher productivity with fewer tool changes. Practical benefits for workshop integration The insert code and format align with common DNMG toolholder systems, enabling straightforward replacement and inventory management. The grade’s suitability for both M and S material groups simplifies tooling strategies across mixed production runs of stainless steel and heat‑resistant alloys, reducing tool variety while keeping machining performance high. Documentation of tolerance class M and the Tiger·tec Silver series helps with process planning and tool selection in quality‑driven environments. For reliable performance in stainless steel and superalloys, contact Metav Werkzeuge for purchasing guidance and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DNMG150604-MM5-WSM10S-WALTER Designation: DNMG150604-MM5 WSM10S Product type: Indexable turning insert Core data Insert form: Rhombus 55° Corner radius: 0.4 mm Relief angle: 0° (negative) Thickness code: 06 Size: 15 Tolerance class: M Materials & features Grade: WSM10S (Tiger·tec Silver) Chipbreaker: MM5 Series: Tiger·tec Silver Material groups: stainless steel (M), heat‑resistant superalloys and titanium (S) Coating: coated carbide FAQ What materials is this insert suitable for? The DNMG150604‑MM5 WSM10S insert by Walter Tools is designed for stainless steel (M) and for heat‑resistant superalloys and titanium (S), offering enhanced wear resistance for these groups. How does the MM5 chipbreaker affect machining? The MM5 chipbreaker on the WSM10S grade promotes stable chip formation, which reduces build‑up and improves surface finish and process security when turning demanding alloys. Why use a negative 0° relief angle? A 0° (negative) relief angle increases edge strength and reduces the risk of chipping under heavy cuts or interrupted machining, improving repeatability for precision turning operations. Can this insert handle interrupted cuts and heavy feeds? Yes, the rhombic 55° geometry combined with the 0.4 mm corner radius and robust grade supports interrupted cuts and heavier feed rates while maintaining edge stability. Is the Tiger·tec Silver coating suitable for high temperatures? The Tiger·tec Silver coating on the WSM10S grade enhances thermal resistance and wear performance, making it appropriate for applications where cutting temperatures are elevated. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools) is a leading manufacturer of precision metalworking tools and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. The named brands and trademarks are cited for explanatory purposes only and do not imply any affiliation with Metav Werkzeuge.
DNMG150604-MM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger‑tec Silver coating and the WSM20S grade for reliable chip control and long cutting-edge life when machining demanding alloys; order directly via Metav Werkzeuge or consult our team for application advice. DNMG150604-MM5 WSM20S — Indexable turning insert (Tiger‑tec Silver) by Walter Tools DNMG150604-MM5 WSM20S is a negative‑geometry indexable turning insert designed for demanding applications on rostfreier Stahl and heat‑resistant superalloys Tiger‑tec Silver coating technology MM5 chipbreaker for stable chip control Suited for rostfreier Stahl and superalloys Rhombic 55° form for secure cutting geometry Higher process reliability for tough materials The coated carbide grade WSM20S, part of the Tiger‑tec Silver family, is developed for machining rostfreier Stahl and heat‑resistant superalloys. Its formulation prioritises thermal resistance and edge stability, which reduces the risk of built‑up edge and unexpected wear. For production environments this means fewer tool changes, more predictable cycle times and improved component repeatability — a clear efficiency advantage when processing materials that are prone to toughness and high heat generation. Consistent chip formation and reduced downtime Equipped with the MM5 chipbreaker, the insert promotes controlled chip formation even under interrupted cuts and variable depths. Stable chips lower the likelihood of surface damage and machine stoppages, contributing directly to higher uptime and reduced secondary operations. The combination of chip geometry and the coated grade supports a reliable cutting process, helping to maintain consistent surface finish and dimensional stability across serial production. Geometry that enhances clamping and cutting security The rhombic 55° outline and negative relief (0°) provide a robust cutting edge with secure seat engagement in the toolholder. A corner radius of 0.4 improves edge strength without compromising form accuracy, making the insert suitable for both finishing and light roughing tasks depending on the holder and feed setting. Negative‑geometry inserts deliver mechanical rigidity and are especially effective where interrupted cutting forces occur or when heavy radial loads are expected. Practical benefits for workshop productivity Using this turning grade in the correct application delivers measurable gains: improved tool life, consistent surface quality and lower reprocessing effort. The designation DNMG150604-MM5 indicates the plate shape and interface compatibility, enabling straightforward selection for existing toolholders. When combined with appropriate cutting parameters and coolant strategies, the insert supports a cost‑effective machining strategy for components made from rostfreier Stahl and similar alloys. Contact Metav Werkzeuge for tailored cutting data and application support for the Walter Tools DNMG150604-MM5 WSM20S insert Technical Data Article number: DNMG150604-MM5-WSM20S-WALTER SKU: DNMG150604-MM5-WSM20S-WALTER Designation: DNMG150604-MM5 WSM20S Series: Tiger‑tec Silver Grade: WSM20S Manufacturer: Walter Tools Facts Shape: Rhombus 55° Relief angle: 0° (negative) Corner radius: 0.4 Size: 15 Thickness: 06 Special features Coating technology: Tiger‑tec Silver Chipbreaker: MM5 Geometry: negative (G) Material suitability: S / M (superalloys/titanium and rostfreier Stahl) Tolerance class: M Application focus: machining of rostfreier Stahl and heat‑resistant superalloys FAQ What materials is this insert suitable for? The DNMG150604‑MM5 WSM20S insert is designed for machining rostfreier Stahl and heat‑resistant superalloys, reflecting the WSM20S grade’s focus on thermal stability and edge retention. How does the MM5 chipbreaker improve machining? The MM5 chipbreaker on the DNMG150604‑MM5 promotes consistent chip segmentation and evacuation, which reduces the risk of chip entanglement and helps maintain steady cutting forces during production. Is the insert compatible with standard DNMG toolholders? Yes, the DNMG designation indicates compatibility with standard DNMG toolholders; ensure the holder supports negative‑geometry inserts and the chosen corner radius for optimal clamping. What advantage does the Tiger‑tec Silver coating offer? The Tiger‑tec Silver coating enhances thermal resistance and wear protection, extending tool life and improving process stability when machining demanding alloys. Can this insert be used for finishing operations? With its 0.4 corner radius and stable cutting edge, the insert can be used for finishing and light finishing passes depending on cut data and machine rigidity. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are used solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is original factory‑new merchandise from Walter Tools.
DNMG150604-MM5 WSM30S MM5 Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating, a proven MM5 chipbreaker and a 0.4 mm corner radius for reliable machining of stainless steel and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult the specialists for application advice. DNMG150604-MM5 WSM30S turning insert for stainless steel and superalloys | Walter Tools The DNMG150604-MM5 WSM30S is a coated carbide turning insert from the Tiger·tec Silver series, engineered for stable cutting performance when machining stainless steel and heat‑resistant superalloys. Tiger·tec Silver coating for high process reliability Optimised MM5 chipbreaker for secure chip control Rhombic 55° form with 0° negative rake 0.4 mm corner radius for consistent surface quality Increase throughput with proven coating and chip control The Tiger·tec Silver technology combined with the WSM30S grade delivers measurable improvements in wear resistance and tool life when working with demanding materials. The MM5 chipbreaker is designed to promote controlled chip formation and evacuation, which reduces the risk of built‑up edge and improves component finish. For production environments where predictable tool cycles and fewer interruptions matter, this insert supports stable machining windows and consistent part quality. Maintain edge stability on demanding alloys and stainless steel With a 0° negative rake and a 0.4 mm corner radius, the geometry prioritises edge strength and resistance to thermal and mechanical shock. The rhombic 55° shape provides a versatile approach angle for a wide range of turning operations, delivering a good balance between cutting force and contact area. These design choices mean fewer edge failures and longer intervals between indexings, contributing to improved machine uptime and predictable process performance. Flexible application scope and operational benefits Classified for ISO groups M and S, this insert is suitable for machining stainless steel as well as heat‑resistant superalloys and titanium, where heat generation and edge stress are critical. The standard DNMG form factor simplifies tooling logistics and mounting in common toolholders, while the coated hardmetal substrate ensures reproducible results under varied cutting conditions. The combination of a robust grade and an optimised chipbreaker supports economical machining through longer life and reduced rework. Contact Metav Werkzeuge for tailored cutting data and application support on Walter Tools inserts or request a material‑specific recommendation from our technical team Technical Data Article number: DNMG150604-MM5-WSM30S-WALTER Designation: DNMG150604-MM5 WSM30S Manufacturer: Walter Tools Facts Plate form: Rhombus 55° Corner radius: 0.4 mm Free angle: 0° (negative) Plate size: 15 Thickness: 06 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WSM30S (coated carbide) Chipbreaker: MM5 Applicability: S / M (superalloys and stainless steel) Execution: G FAQ What materials is this insert designed for? The DNMG150604-MM5 WSM30S insert is specified for ISO groups M and S, making it suitable for stainless steel as well as heat‑resistant superalloys and titanium‑based materials. How does the MM5 chipbreaker affect machining? The MM5 chipbreaker on the WSM30S grade promotes controlled chip formation and evacuation, improving surface quality and reducing the likelihood of built‑up edge during turning operations. Is the geometry suitable for finishing operations? The rhombic 55° form combined with a 0.4 mm corner radius delivers a compromise between strength and finish; the insert can be used for semi‑finishing and finishing depending on cutting parameters and workpiece material. Does the Tiger·tec Silver series improve tool life? Yes, the Tiger·tec Silver coating technology enhances wear resistance and thermal stability, which supports longer tool life and more consistent cutting performance under demanding conditions. Can this insert be used in standard DNMG tool holders? The insert follows the DNMG form factor and is compatible with standard DNMG tool holders, facilitating simple integration into existing turning setups. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
DNMG150604-MP3 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of a proven combination of high productivity and reliable edge life through the Tiger‑tec Gold grade and MP3 chipbreaker; this insert delivers stable chip control and consistent machining of steel. Order directly via Metav Werkzeuge or consult their application specialists for process optimisation. DNMG150604-MP3 WPP10G indexable turning insert — Tiger‑tec Gold, for steel turning (Walter Tools) The DNMG150604-MP3 WPP10G is an indexable turning insert engineered for steel applications, offering a Tiger‑tec Gold coated grade and an MP3 chipbreaker for dependable chip control and long tool life. Tiger‑tec Gold coating for extended tool life MP3 chipbreaker for stable chip control Rhombic 55° geometry for versatile turning 0.4 mm corner radius for fine surface finish Predictable productivity for steel machining The coated carbide grade used here, WPP10G, is tuned for machining steel, combining wear resistance with toughness to maintain edge stability under typical turning conditions. The Tiger‑tec Gold technology provides a robust coating stack that reduces flank wear and helps extend tool life, reducing downtime for insert changes. Because the grade balances hardness and toughness, users benefit from fewer interruptions and more consistent cycle times when turning unalloyed and alloyed steels. The MP3 chipbreaker contributes to this by producing controllable chips, which lowers the risk of surface damage and supports continuous production. Precision and surface quality achieved through geometry A rhombic 55° shape with a 0.4 mm corner radius supports finishing and light-medium turning operations where surface integrity matters. The negative rake (0° (negative)) geometry increases cutting edge strength for interrupted cuts and heavy engagement, making the insert suitable for stable roughing as well as semi-finishing. The combination of grade and geometry delivers improved surface finishes without sacrificing tool life, and the defined corner radius helps to generate reproducible edge conditions for repeatable part quality. How the chipbreaker and coating improve process security The MP3 chipbreaker is designed to create short, segmented chips when machining steels, which simplifies chip evacuation and reduces the likelihood of entanglement on the toolholder. This leads to safer operation and easier handling in automated environments. The coated carbide substrate provides thermal and mechanical protection to the cutting edge; in practice, this translates to predictable wear patterns and a longer useful life compared with uncoated grades. For customers seeking efficiency, these features help lower operating costs by reducing insert consumption and stabilising cycle times. Application guidance and selection advice The insert is primarily intended for turning steel in the ISO P group; the grade performs well across a range from more wear‑resistant to more ductile steels thanks to its balanced properties. For roughing with heavy cuts the negative rake and robust coating provide resilience, while the moderate corner radius enables fine finishes in semi‑finishing passes. When integrating the insert into a machining process, assess cutting speed and feed to match the grade’s strength—optimised parameters will prolong life and improve consistency. For specialised materials or extreme cutting conditions, consult the application engineers at Metav Werkzeuge for tailored recommendations. For reliable, high‑productivity turning with Walter Tools’ Tiger‑tec Gold inserts, contact Metav Werkzeuge for application advice or to request the DNMG150604-MP3 WPP10G insert via e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: DNMG150604-MP3-WPP10G-WALTER SKU: DNMG150604-MP3-WPP10G-WALTER Product type: Indexable turning insert Designation: DNMG150604-MP3 WPP10G Series: Tiger‑tec Gold Grade: WPP10G Facts Inscribed circle: 15 mm Thickness: 6.0 mm Corner radius: 0.4 mm Relief / rake angle: 0° (negative) Insert shape: Rhombic 55° Tolerance class: M Special features Chipbreaker: MP3 Coating: Tiger‑tec Gold (coated carbide) Material application: Steel (ISO P) Application range: roughing to semi‑finishing Manufacturer brand: Walter Tools FAQ What materials is this insert suitable for? The DNMG150604-MP3 WPP10G insert is designed primarily for steel (ISO P); the Walter Tools grade offers a balance of wear resistance and toughness for common steel turning tasks. How does the MP3 chipbreaker affect chip formation? The MP3 chipbreaker on this Walter Tools insert produces short, controlled chips during steel turning, which improves chip evacuation and reduces the risk of chip-related interruptions. Can this insert be used for interrupted cuts? Yes, the negative rake (0°) geometry and the Tiger‑tec Gold coating of the DNMG150604-MP3 provide enhanced edge strength suitable for interrupted cutting conditions. What surface finish can be expected with a 0.4 mm corner radius? A 0.4 mm corner radius typically yields fine surface finishes in semi‑finishing passes while maintaining a durable cutting edge, ideal for consistent part quality with this insert. Is the grade appropriate for both roughing and finishing operations? The WPP10G grade offers versatility: the robust coating and geometry are well suited to stable roughing, while the rhombic form and modest corner radius permit semi‑finishing with good surface quality. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
DNMG150604-MP3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a dedicated WPP20G grade and the secure MP3 chipformer for efficient machining of Stahl; order the DNMG150604‑MP3 WPP20G turning insert directly via Metav Werkzeuge or consult our specialists for application support. DNMG150604-MP3 WPP20G turning insert (for Stahl) — Tiger‑tec Gold, 0° negative — Walter Tools DNMG150604‑MP3 WPP20G is an indexable turning insert designed for robust and versatile turning of Stahl, featuring a rhombic 55° geometry, MP3 chipbreaker and Tiger‑tec Gold coating for stable performance Tiger‑tec Gold coated carbide grade WPP20G 0° negative rake for secure cutting 0.4 mm corner radius for precision finishing Consistent chip control for reliable productivity The coated carbide WPP20G grade, combined with the MP3 chipbreaker, ensures predictable chip formation and evacuation during medium to continuous turning operations. This results in fewer interruptions for chip clearing and a lower risk of built‑up edge, which together increase effective uptime. The configuration is particularly advantageous where repeatability and cycle‑time reduction are central to productivity: the chip geometry keeps cutting forces stable and minimises vibration, delivering a measurable improvement in process security and tool life. Geometry that improves surface quality with stability A rhombic 55° form and a 0.4 mm corner radius offer a balance between edge strength and surface finish. The 0° negative rake provides a blunt, robust cutting edge that resists corner chipping under heavy engagement, making the insert suitable for interrupted cuts and applications where rigidity is limited. These geometric choices translate into a reliable surface quality on the workpiece and reduced rework, especially on shafts and turned components produced from Stahl where dimensional conformity is critical. Coating and material pairing for extended life The Tiger‑tec Gold coating technology on this indexable insert improves thermal resistance and reduces flank wear in turning operations. As a coated carbide grade, it is optimised for machining Stahl, addressing the specific heat generation and chip behaviour typical of such materials. The result is a combination of wear resistance and toughness that extends effective cutting life under common production parameters, thereby lowering tooling cost per part and supporting longer uninterrupted production runs. Practical guidance for fitting and application The insert’s designation facilitates selection of suitable toolholders and clamping systems for stable set‑ups; the MP3 chipbreaker performs well in both finishing and light roughing passes when feeds and speeds are tuned to the workpiece and machine rigidity. For best outcomes, pair the insert with a rigid clamping system and verify cutting data with trial cuts on representative material. Adjustments to feed can fine‑tune chip size and surface finish while maintaining the insert’s balanced performance characteristics. For reliable, high‑productivity turning with Walter Tools’ Tiger‑tec Gold WPP20G grade, contact Metav Werkzeuge for tailored recommendations, availability and technical data at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: DNMG150604-MP3-WPP20G-WALTER SKU: DNMG150604-MP3-WPP20G-WALTER Designation: DNMG150604-MP3 WPP20G Facts Insert size: 15 Corner radius: 0.4 mm Clearance angle: 0° negative Plate thickness: 06 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP20G Chipbreaker: MP3 Coating: coated carbide Form: Rhombus 55° Application: Stahl FAQ What materials is this insert suitable for? This insert is optimised for machining Stahl; the WPP20G grade and Tiger‑tec Gold coating address the heat and chip behaviour typical of steel materials. Can the DNMG150604‑MP3 WPP20G handle interrupted cuts? Yes, the rhombic 55° geometry and 0° negative rake give the DNMG150604‑MP3 WPP20G the edge robustness required for interrupted cutting and applications with limited rigidity. How does the MP3 chipbreaker affect finishing operations? The MP3 chipbreaker promotes controlled chip formation and evacuation, supporting consistent surface quality during finishing passes while maintaining process stability. Is the insert suitable for light roughing and finishing on the same part? The combination of WPP20G grade and the MP3 chipbreaker allows flexible use in both light roughing and finishing if cutting parameters are adapted to the operation and machine conditions. How to identify the correct grade and series on the insert? Markings include the designation DNMG150604‑MP3 WPP20G and the Tiger‑tec Gold series; these identify the geometry, chipbreaker and the WPP20G coated carbide grade. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanation. There is no connection between our company and the named brands. The offered article is original, brand‑new goods from the manufacturer.
DNMG150604-MP3 WPP30G WPP30G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold coating and the WPP30G grade delivers extended tool life and consistent performance in steel turning, while the MP3 chipbreaker and rhombus 55° geometry ensure secure chip control and surface finish. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. DNMG150604-MP3 WPP30G indexable turning insert – Tiger‑tec Gold, for steel – Walter Tools The DNMG150604-MP3 WPP30G is an indexable turning insert engineered for robust steel machining, offering a coated carbide grade in the Tiger‑tec Gold series for high productivity. Tiger‑tec Gold coating for long life MP3 chipbreaker for reliable chip control Rhombus 55° geometry for versatile turning Designed for steel machining Longer tool life through advanced coating technology The coated carbide WPP30G grade from the Tiger‑tec Gold series combines wear resistance with stable cutting-edge performance to extend tool intervals and reduce tooling costs. This surface treatment is designed to cope with the thermal and mechanical loads typical of machining steel, enabling a higher material removal rate without premature flank wear. The biological effect is predictable: fewer tool changes, less downtime and improved net output per shift. By favouring a coated grade tuned for steel, process planners benefit from consistent cutting behaviour and improved tool life, which supports cost-efficiency across batch and continuous production. Predictable chip control for safer, faster turning The MP3 chipbreaker is tailored to produce controllable, short chips when turning unalloyed and alloyed steels, reducing the risk of entanglement and enhancing operator safety. Stable chip formation improves coolant access to the cutting zone and lowers the chance of re-cutting chips, which in turn helps maintain surface quality. This geometry aids in heat dissipation and reduces cutting forces, supporting higher cutting speeds and feeds without compromising component finish. The result is a clear productivity advantage when machining steel components with commonly used turning parameters. Geometry that balances precision and robustness The rhombus 55° form combined with a corner radius 0.4 mm and a 0° relief angle (negative) delivers a compromise between edge strength and cutting sensitivity. The 55° diamond shape provides multiple effective cutting corners per insert, while the modest radius improves edge stability for interrupted cuts and moderate feed rates. A negative relief angle gives the insert a robust cutting edge suitable for heavier cuts and tougher conditions, contributing to vibration damping and repeatable dimensional accuracy. These geometric choices translate directly into improved surface finish and process reliability on production runs. Easy integration into existing turning setups for consistent production As an indexable insert in DNMG form, this turning grade fits standard holders that accept DNMG‑type inserts and benefits from a tolerance class M for repeatable seating and clamping accuracy. The specified plate dimensions and thickness ensure compatibility with common toolholders used in turning centres and lathe setups. For series production, this combination reduces setup variability and supports stable cutting data across several shifts. If machining parameters require optimisation, the Walter Tools grade pairing with Tiger‑tec Gold can be matched to cutting speeds and feeds to achieve the desired balance of surface quality and tool life. Contact Metav Werkzeuge to discuss cutting data, sample recommendations or tailored machining parameters for Walter Tools Tiger‑tec Gold inserts and to arrange application advice from our consultants Technical data Article number: DNMG150604-MP3-WPP30G-WALTER Designation: DNMG150604-MP3 WPP30G Type: Indexable turning insert Brand: Walter Tools Core dimensions & ratings Plate size: 15 Corner radius: 0.4 mm Thickness: 06 Relief angle: 0° (negative) Design & special features Coating / series: Tiger‑tec Gold Grade: WPP30G Chipbreaker: MP3 Geometry: Rhombus 55° Tolerance class: M Material application: Steel FAQ Which materials is this insert intended for? The DNMG150604-MP3 WPP30G insert is designed primarily for machining steel; the WPP30G grade and Tiger‑tec Gold technology are optimised for the heat and chip characteristics of unalloyed and alloyed steels. What benefits does the Tiger‑tec Gold coating offer? Tiger‑tec Gold increases wear resistance and thermal stability for the WPP30G grade, leading to longer tool life and more consistent cutting performance under steel turning conditions. How does the MP3 chipbreaker affect machining? The MP3 chipbreaker promotes reliable chip control, producing short, manageable chips that reduce entanglement and improve coolant access, thereby supporting safer and more productive turning operations. What does the rhombus 55° shape and 0.4 mm corner radius mean in practice? The rhombus 55° geometry provides multiple cutting corners for economical use, while a corner radius of 0.4 mm balances edge strength and surface finish; together with the negative relief angle they enhance stability during heavier cuts. Will this insert fit standard DNMG holders and deliver repeatable seating? Yes, the insert conforms to the DNMG form and the tolerance class M ensures repeatable seating and clamping accuracy when used with compatible toolholders. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
DNMG150604-MP5 WPP10G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold grade and the MP5 chipbreaker for dependable chip control and predictable tool life; the rhombic 55° geometry with a 0.4 mm corner radius and negative rake 0° gives robust performance in Stahl turning operations. Order the insert directly via Metav Werkzeuge or ask the consultants for application support. DNMG150604-MP5 WPP10G — turning insert, Tiger·tec Gold grade for Stahl, Walter Tools The DNMG150604-MP5 WPP10G is a rhombic 55° indexable turning insert designed for general Stahl machining with a coated carbide grade and MP5 chipbreaker for steady chip formation. Tiger·tec Gold coated carbide grade WPP10G MP5 chipbreaker for consistent chip control Rhombic 55° geometry with 0.4 mm radius Negative rake 0° for robust turning performance Increased productivity through a wear-resistant grade The coated-carbide WPP10G grade, part of the Tiger·tec Gold series, is formulated to combine wear resistance with versatility for Stahl machining. This results in extended cutting intervals and fewer tool changes, reducing downtime in serial production. The coating improves thermal resistance and minimises flank wear under typical cutting temperatures encountered in Stahl turning, which translates into consistent tool life and stable surface quality with less rework. Reliable chip control and process stability The MP5 chipbreaker is engineered for reproducible chip formation in medium to heavy Stahl cuts, providing controlled chip flow and reduced risk of chip entanglement. Combined with the rhombic 55° geometry and negative rake 0°, the design supports robust cutting edges and predictable forces, which improve fixture life and machine uptime. For machining operations where consistent chip evacuation is essential, this insert keeps tool paths clean and cycle times steady, enabling more reliable production planning. Precise geometry for predictable results Tolerance class M and a 0.4 mm corner radius deliver a balance between edge strength and finish. The insert’s thickness and form suit a wide range of turning tasks, from roughing with higher engagement to finishing passes that demand surface integrity. Using an indexable insert with these characteristics reduces process variability, making it easier to achieve repeatable part tolerances and consistent surface roughness in Stahl components. Application focus and handling recommendations This insert is intended for Stahl (ISO P) applications and excels where thermal loads and continuous chip formation define the cutting environment. To make the most of the grade and geometry, select cutting parameters that emphasise stable feed and proper coolant/lubrication for the material grade. The design supports both interrupted and continuous cuts under standard turning conditions, offering a practical solution for workshops seeking predictable, economical machining. Contact Metav Werkzeuge to discuss how the Walter Tools DNMG150604-MP5 WPP10G insert can be integrated into current turning processes and to receive tailored application advice Technical data SKU: DNMG150604-MP5-WPP10G-WALTER Label: Drehwendeschneidplatte DNMG150604-MP5 WPP10G Walter Tools Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts Series: Tiger-tec Gold Grade / Sort: WPP10G Geometry: Rhombus 55° Corner radius: 0.4 mm Free angle: 0° (negative) Chipbreaker: MP5 Plate size: 15 Plate thickness: 06 Tolerance class: M ISO designation: DNMG150604-MP5 WPP10G Special features Coated carbide grade Tiger·tec Gold Designed for Stahl (ISO P) Stable chip formation and process security Robust cutting edge for medium to heavy cuts FAQ What materials is this insert suitable for? The DNMG150604-MP5 WPP10G insert is designed primarily for Stahl (ISO P group), optimised for the heat and chip characteristics typical when turning steels. How does the MP5 chipbreaker influence machining? The MP5 chipbreaker on the Walter Tools insert promotes controlled chip formation and evacuation, improving process stability and reducing the likelihood of chip-related interruptions. Can this insert be used for finishing passes? Yes; the rhombic 55° form with a 0.4 mm corner radius provides sufficient edge strength for many finishing operations while maintaining acceptable surface quality. Is the grade suitable for high-speed cutting? The Tiger·tec Gold grade offers enhanced thermal resistance and wear properties that support elevated cutting speeds in Stahl machining, while preserving tool life. What is the ISO designation for ordering and reference? The ISO designation is DNMG150604-MP5 WPP10G, which should be used for correct identification when specifying or ordering the insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, brand-new product of Walter Tools.
DNMG150604-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of a robust Tiger·tec Gold grade and the MP5 chipbreaker for consistent performance in steel turning. For tailored advice or procurement, order directly via Metav Werkzeuge or consult the technical team for machining recommendations. DNMG150604-MP5 WPP20G – Turning insert (Tiger·tec Gold) by Walter Tools The DNMG150604-MP5 WPP20G is a rhombic turning insert engineered for reliable steel machining, offering a Tiger·tec Gold coated grade and MP5 chip control for stable performance in demanding turning applications Tiger·tec Gold coating for long tool life MP5 chipbreaker for predictable chip formation Rhombic 55° geometry for versatile turning 0° negative rake for stable cutting forces Longer tool life with Tiger·tec Gold for steel machining The combination of the Tiger·tec Gold coating and the WPP20G carbide grade delivers a pronounced increase in wear resistance under typical steel cutting conditions. Coating technology reduces flank and crater wear, which translates into extended tool life and fewer insert changes during production runs. This stability supports consistent cycle times and contributes to lower overall machining costs by reducing downtime for tool changes and regrinding. Predictable chip control and stable cutting for productivity Equipped with the MP5 chipbreaker and a rhombic 55° form, the insert produces controlled chips and reduces the risk of built-up edge formation when turning ISO P materials. The 0° (negative) rake increases edge robustness and improves resistance to interrupted cuts, while the modest 0.4 corner radius provides a balance between edge strength and surface finish. These features together enable higher process reliability and repeatable part quality in series production. Integration in production and application guidance The insert is specified for steel (ISO P) and suits a range of general turning tasks where consistent surface finish and long tool life are priorities. As a coated carbide turning insert, it integrates easily into standard tool holders designed for DNMG geometry, supporting straightforward implementation into existing turning cells. If additional machining data or cutting parameters are required for specific steels or feeds, Metav Werkzeuge’s technical advisers can supply tailored recommendations and cutting charts by email or phone. For precision steel turning with Walter Tools' Tiger·tec Gold technology, contact Metav Werkzeuge for procurement and machining support to ensure optimal integration into production. Technical data SKU: DNMG150604-MP5-WPP20G-WALTER Article designation: DNMG150604-MP5 WPP20G Product type: Turning insert Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: MP5 Shape: Rhombus 55° Rake angle: 0° (negative) Corner radius: 0.4 Plate size: 15 Thickness: 06 Tolerance class: M Facts SKU: DNMG150604-MP5-WPP20G-WALTER Series: Tiger·tec Gold Grade: WPP20G Shape: Rhombus 55° Corner radius: 0.4 Plate size: 15 Thickness code: 06 Rake angle: 0° (negative) Tolerance class: M Special features Chipbreaker type: MP5 Material group suitability: Steel (ISO P) Grade technology: Tiger·tec Gold coating Designation without grade: DNMG150604-MP5 ISO designation: DNMG150604-MP5 WPP20G Execution: G Material code: P Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The DNMG150604-MP5 WPP20G is designed primarily for steel machining and is optimised for ISO P materials using the Tiger·tec Gold coated grade. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker on this Walter Tools turning insert improves chip control and contributes to stable cutting conditions, reducing the likelihood of long stringy chips during turning. What does the 0° negative rake deliver in practice? A 0° negative rake increases edge strength and resistance to edge chipping, which is particularly useful for interrupted cuts and tougher turning operations with the DNMG insert. Can this insert be used in standard DNMG tool holders? Yes, the DNMG150604-MP5 geometry corresponds to standard holders for DNMG inserts; verification of clamping and seat compatibility is recommended before series use. What nose radius and surface finish can be expected? With a corner radius of 0.4, the insert balances edge strength and surface finish, delivering reliable part quality in general turning operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (marketed as Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision cutting tools and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the named manufacturers. The offered item is original, brand-new factory goods from the manufacturer.
DNMG150604-MP5 WPP30G WPP30G Wendeplatten - Walter Tools
Benefit from the combination of extended tool life through Tiger·tec Gold coating, precise chip control with the MP5 breaker and a robust Rhombus 55° geometry for consistent turning results; order the insert directly via Metav Werkzeuge or consult our technical team for cut data and stock information. DNMG150604-MP5 WPP30G turning insert DNMG150604-MP5 for steel — Walter Tools The DNMG150604-MP5 WPP30G is a coated indexable turning insert designed for productive steel machining in general turning applications. Tiger·tec Gold coating for long tool life MP5 chipbreaker for controlled chip formation Rhombus 55° geometry for versatile turning Corner radius 0.4 mm for stable cutting edge Increase throughput with consistent edge stability The Tiger·tec Gold technology and the WPP30G grade combine to provide a coated carbide solution that emphasises wear resistance and process reliability in steel machining (ISO P). By stabilising the cutting edge, the grade reduces flank wear and promotes repeatable part quality, which leads to fewer interruptions and more predictable tool-change intervals. For shops aiming to maintain cycle times while improving surface finish, this cutting grade supports higher cutting speeds and steady performance under varying batch sizes. Predictable chips and safer machining cycles The MP5 chipbreaker is configured to produce short, controllable chips during a wide range of cutting conditions, reducing the risk of entanglement and easing material removal. The Rhombus 55° insert form, combined with a negative rake (0°) and a corner radius of 0.4 mm, gives a robust edge that tolerates interrupted cuts and shoulder work. These characteristics translate into improved process stability and reduced secondary operations, helping to maintain throughput and operator confidence on mixed-production workloads. Practical selection and application guidance The DNMG geometry with a plate size of 15 and a plate thickness of 06 offers a balance between rigidity and accessibility for common turning setups. The insert is specified to tolerance class M, suitable for routine clamping systems and repeatable pocketing. As a grade developed for steel, the cutting material is optimised for the heat and chip formation typical of unalloyed and alloyed steels: expect consistent chip evacuation and reliable surface results. For parameter recommendations and tailored feed/speed suggestions, Metav Werkzeuge provides cutting data and application support. Contact Metav Werkzeuge for detailed cutting data, availability and bespoke advice on Walter Tools Tiger·tec Gold inserts to optimise steel turning operations Technical data Article number: DNMG150604-MP5-WPP30G-WALTER Product type: Turning insert (indexable) Designation: DNMG150604-MP5 WPP30G Manufacturer: Walter Tools Facts Plate size: 15 Plate thickness: 06 Corner radius: 0.4 mm Free angle: 0° (negative) Plate form: Rhombus 55° Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP30G (coated carbide) Chipbreaker: MP5 Material application: Steel (ISO P) Robust geometry for interrupted cuts Stable edge for repeatable part quality FAQ What materials is this insert suitable for? The DNMG150604-MP5 WPP30G insert is optimised for steel (ISO P), including unalloyed and alloyed steels; the WPP30G grade and Tiger·tec Gold coating are tuned for the heat and chip behaviour typical of these materials. How does the MP5 chipbreaker benefit production? The MP5 chipbreaker on this insert promotes short, controllable chips, reducing chip entanglement and improving evacuation, which contributes to safer, more efficient turning cycles. Is the insert suitable for interrupted cuts and shoulder work? Yes. The Rhombus 55° form, negative rake and a corner radius of 0.4 mm give the insert a robust edge that tolerates interrupted cuts and shoulder machining. Which tolerance and clamping systems are compatible? The insert is supplied to tolerance class M, compatible with standard DNMG pockets and common clamping systems designed for this tolerance level. Can this grade increase machining speeds compared with conventional grades? The Tiger·tec Gold-backed WPP30G grade is designed for higher process reliability and can often support increased cutting speeds while maintaining tool life, depending on the machine and setup. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (marketed as Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Protected trademarks and brand names are the property of their respective owners and are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is original, brand-new merchandise from Walter Tools.
DNMG150604-MS3 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of a robust Tiger‑tec Silver series coating and the WSM01 carbide grade for reliable chip control when machining stainless steels and heat‑resistant alloys; order directly via Metav Werkzeuge or contact our consultants for application support. DNMG150604‑MS3 WSM01 indexable turning insert — Rhombic 55°, Tiger‑tec Silver (Walter Tools) A compact DNMG150604‑MS3 WSM01 indexable turning insert engineered for demanding turning tasks in stainless steels and heat‑resistant superalloys, offering stable cutting edges and controlled chip formation Tiger‑tec Silver coating for extended life WSM01 grade suited to stainless and superalloys Rhombic 55° shape, 0.4 mm corner radius MS3 chipbreaker for consistent chip control Durable grade and coating for tough materials The WSM01 carbide grade, paired with the Tiger‑tec Silver series coating, is tailored for the thermal and mechanical demands of stainless steels and high‑temperature alloys. This combination promotes stable edge behaviour under the pressures of high heat and work‑hardening, reducing the risk of built‑up edge and unexpected flank wear. The result is a more predictable machining process, with fewer interruptions for tool changes and rework, which supports continuous production and improved process reliability. Geometry that stabilises cutting and chip flow The Rhombic 55° plate form with a 0° (negative) relief produces strong cutting edges that withstand heavy engagement and interrupted cutting. The MS3 chipbreaker is designed to segment and control chips effectively for turning operations in tough materials, reducing long, stringy swarf and improving surface quality. The 0.4 mm corner radius balances edge strength with achievable surface finish, making this insert suitable for medium to heavy turning where consistent geometry and chip management matter. Productivity gains through process security Combining a resilient coating and a robust grade delivers clear productivity advantages: extended tool life, fewer unplanned stops and consistent component quality. As a coated carbide insert from Walter Tools, this design contributes to higher throughput and predictable operating costs by improving toolholding intervals and stabilising cutting forces. The insert’s specification supports efficient planning for batch production and single‑piece flows alike, with measurable benefits to cycle time and overall equipment effectiveness. Practical use and application notes This indexable turning insert is intended for use in conventional turning toolholders that accept DNMG‑style plates. It is particularly effective for applications classified in ISO groups M (stainless steels) and S (heat‑resistant superalloys and titanium) where thermal resistance and edge stability are crucial. The insert is supplied in the DNMG150604‑MS3 geometry and should be combined with appropriate cutting parameters for the workpiece material and machine rigidity; consult technical data sheets or Metav Werkzeuge consultants for optimisation advice. Handling and indexing are straightforward, allowing quick rotation to fresh cutting edges and minimising downtime. For demanding stainless and superalloy turning tasks, select the Walter Tools DNMG150604‑MS3 WSM01 Tiger‑tec Silver insert from Metav Werkzeuge — for tailored recommendations and cutting‑data support, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DNMG150604‑MS3‑WSM01‑WALTER Name: DNMG150604‑MS3 WSM01 indexable turning insert Manufacturer: Walter Tools Core technical data Series: Tiger‑tec Silver Grade: WSM01 Shape: Rhombus 55° Relief (free) angle: 0° (negative) Corner radius: 0.4 mm Size: 15 Thickness designation: 06 Chipbreaker: MS3 Tolerance class: M Special features Coated carbide construction Suited for stainless steels (ISO M) Suited for heat‑resistant alloys and titanium (ISO S) Stable cutting edge and controlled chip formation Suitable for medium to heavy turning applications FAQ What materials is this insert suitable for? The DNMG150604‑MS3 WSM01 is optimised for stainless steels (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), thanks to the WSM01 grade and Tiger‑tec Silver coating. How does the MS3 chipbreaker influence machining? The MS3 chipbreaker on the DNMG150604‑MS3 promotes segmented chip formation, improving chip control and reducing the chance of long, entangling swarf during turning. What benefits does the Tiger‑tec Silver series provide? The Tiger‑tec Silver coating increases wear resistance and thermal stability, extending the service life of the WSM01 insert while maintaining cutting‑edge integrity under demanding conditions. Is the corner radius suitable for finishing operations? With a 0.4 mm corner radius the insert offers a compromise between edge strength and surface finish; it is suitable for many finishing and medium finishing applications when paired with appropriate feeds and speeds. How is the insert mounted and indexed? The insert is a DNMG‑type plate and is mounted in compatible indexable turning holders; its indexable design allows quick rotation to a fresh cutting corner to reduce machine downtime. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for descriptive purposes only; there is no affiliation between our company and the named brands. The offered article is an original, factory‑new product from the specified manufacturer.
DNMG150604-MS3 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of a robust, coated-carbide grade and a geometry optimised for secure chip control when machining stainless steels and heat-resistant alloys; the combination of the Tiger·tec Silver grade and MS3 chipbreaker provides stable cutting and extended tool life. Order the DNMG150604-MS3 WSM10S directly via Metav Werkzeuge or consult the technical advisors for cutting data and process recommendations. DNMG150604-MS3 WSM10S indexable turning insert — Tiger·tec Silver, rhombic 55° (Walter Tools) A DNMG150604-MS3 WSM10S indexable insert designed for turning operations in stainless steels and heat-resistant superalloys, featuring a Tiger·tec Silver coated carbide grade and an MS3 chipbreaker for controlled chip formation Tiger·tec Silver coated carbide For stainless steels and superalloys MS3 chipbreaker for controlled chips Rhombic 55° with 0.4 mm corner radius Stable cutting in stainless and difficult-to-machine alloys The Tiger·tec Silver grade WSM10S combines a wear-resistant coating with a substrate tuned for high thermal loads, making it particularly suited for stainless steels and heat-resistant superalloys. The coated-carbide construction delivers reliable edge stability under the high temperatures and abrasive conditions typical of these materials; as a result, the tool supports longer tool life and fewer interruptions for insert changes. This stability translates into predictable cycle times and helps maintain surface quality in serial production. Predictable chip control and process security Equipped with the MS3 chipbreaker, the insert promotes consistent chip formation across a range of cutting parameters. The controlled chip shape reduces the risk of entanglement and improves swarf evacuation, which is especially beneficial when machining sticky or work-hardening stainless steels. The combination of chip control and a negative 0° rake (0° (negative)) enhances the mechanical strength of the cutting edge, offering process security during interrupted cuts and demanding operations. Geometry optimised for finishing and strength The rhombic 55° form and a 0.4 mm corner radius provide a balance between edge strength and surface finish capability. The 55° approach angle supports versatile turning strategies, from light finishing passes to more substantial cutting depths when required. The moderate corner radius helps to distribute cutting forces and reduces the tendency for localised wear, thereby maintaining dimensional consistency over the life of the insert. Practical grade selection and application advice The WSM10S grade has been specified for applications where heat resistance and edge stability are decisive, covering ISO groups M (stainless steels) and S (superalloys, titanium). In practice, this means the insert is a suitable choice for components that demand consistent surface integrity and where chip control is critical. For process optimisation, testing a limited range of cutting speeds and feeds and documenting resulting tool life will quickly identify the most economical operating window for a given workpiece and machine. Contact Metav Werkzeuge today to specify the DNMG150604-MS3 WSM10S for production use, request tailored cutting data or discuss batch requirements — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DNMG150604-MS3-WSM10S-WALTER Designation: DNMG150604-MS3 WSM10S Grade: WSM10S Series: Tiger·tec Silver Shape: Rhombus 55° Size: 15 Thickness: 06 Corner radius: 0.4 Rake angle: 0° (negative) Chipbreaker: MS3 Material groups: S / M Execution: G Tolerance class: M Core data Inscribed circle / size: 15 Thickness code: 06 Corner radius (mm): 0.4 Approach angle: 55° Rake: 0° Chipbreaker type: MS3 Special features Coating technology: Tiger·tec Silver Coated carbide grade: WSM10S Suitable for: M (stainless steels), S (superalloys, titanium) Designed for: Stable chip formation and edge strength Geometry: Rhombic 55°, 0.4 mm corner radius Application focus: Challenging materials, high thermal loads FAQ What materials is this insert intended for? The DNMG150604-MS3 WSM10S by Walter Tools is formulated for ISO groups M and S — primarily stainless steels and heat-resistant superalloys including titanium. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the WSM10S grade improves thermal resistance and wear performance, resulting in more stable cutting edges and extended insert life when machining demanding materials. What is the role of the MS3 chipbreaker? The MS3 chipbreaker is engineered to produce controlled chips and reliable swarf evacuation, which reduces the risk of chip jamming and supports uninterrupted machining cycles. Is the rhombic 55° form suitable for finishing passes? Yes, the rhombic 55° geometry with a 0.4 mm corner radius balances edge strength and surface finish, making it suitable for fine finishing as well as robust turning applications. Can this insert handle interrupted cuts and heavy engagement? With its negative 0° rake and robust coated-carbide grade, the insert offers enhanced edge strength that resists chipping under interrupted cuts and heavier engagement. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are mentioned solely for explanatory purposes. There is no affiliation between Metav Werkzeuge and the named brands. The offered item is an original, factory-new product of the stated manufacturer. The brand indicated in the product data is Walter Tools.
DNMG150604-NFT WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of robust edge stability, reliable chip control and the Tiger·tec Silver coating for consistent production of stainless and heat-resistant alloys — order the insert directly via Metav Werkzeuge or consult our specialists for application support. DNMG150604-NFT WSM20S indexable turning insert — Tiger·tec Silver, 0° negative rake (Walter Tools) The DNMG150604-NFT WSM20S is an indexable turning insert in rhombic 55° form, engineered for heavy-duty finishing and medium-duty roughing on rostfreiem Stahl and heat‑resistant superalloys. Tiger·tec Silver coating for thermal stability Negative 0° rake for robust chip control Rhombic 55° shape with 0.4 mm corner radius Suited for stainless steels and superalloys Stable cutting performance for demanding alloys The combination of the WSM20S grade and the Tiger·tec Silver coating delivers improved thermal resistance and stable chip formation, which reduces the tendency for build‑up on the cutting edge when machining tough materials. The insert’s negative 0° rake provides a more durable cutting edge under interrupted or heavy cutting conditions; this geometry is particularly advantageous when machining stainless steels and heat‑resistant alloys where heat concentration and material ductility challenge tool life. The result is a dependable machining process with fewer interruptions. Geometry that increases process security and surface quality The rhombic 55° insert shape and 0.4 mm corner radius combine to offer a balanced profile between edge strength and achievable surface finish. Such a configuration enables secure clamping in standard turning holders and supports repeatable results across different part batches. The NFT chipbreaker is optimised for controlled chips in a range of feed rates, improving evacuation and reducing rework. Tolerance class M ensures consistent interchangeability and predictable performance in serial production. Clear application guidance for workshop planning Marked for ISO material groups M and S, this insert is intended for rostfreiem Stahl and heat‑resistant superalloys (including some titanium alloys), making it a practical choice for aerospace, energy and medical component machining where material heat input and chip behaviour must be managed. The indexable insert format allows quick seat changes and economical use of the cutting edges; selecting the correct holder and cutting data will further extend tool life and secure machining quality. Operational advantages and shop-floor benefits Using a coated solid‑carbide grade like WSM20S helps maintain a consistent cutting edge and reduces downtime from edge failures. Shops gain from improved process security and predictable performance, which supports planning and reduces scrap rates. The insert’s design supports both finishing and moderate roughing tasks, so fewer tool types may be required for mixed production runs — a practical benefit for job shops seeking efficient tool inventory management. Contact Metav Werkzeuge for tailored application advice or to specify the Walter Tools DNMG150604-NFT WSM20S insert — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific materials and setups Technical data SKU: DNMG150604-NFT-WSM20S-WALTER Article identification: DNMG150604-NFT WSM20S Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Facts Size: 15 Thickness: 06 Corner radius: 0.4 mm Shape: Rhombus 55° Rake angle: 0° (negative) Tolerance class: M Grade / series: WSM20S / Tiger·tec Silver Special features Chipbreaker type: NFT Coating technology: Tiger·tec Silver Material suitability: S / M Execution: G FAQ What materials is this insert suitable for? The DNMG150604-NFT WSM20S insert is designed for rostfreiem Stahl and heat‑resistant superalloys (ISO groups M and S), reflecting the WSM20S grade’s focus on thermal resistance and stable chip control. How does the 0° negative rake affect machining? A 0° (negative) rake increases edge strength and improves resistance to chipping under heavy or interrupted cuts; the DNMG150604-NFT WSM20S benefits from this geometry when used in robust turning operations. Which chipbreaker is fitted and what is its benefit? The insert features the NFT chipbreaker, which promotes controlled chip formation and evacuation across typical turning feeds, helping to maintain consistent surface quality and reduce handling of long chips. Is this insert compatible with standard DNMG holders? Yes, the DNMG150604-NFT form factor is compatible with standard holders for DNMG inserts; ensure proper clamping and the correct seat to achieve the specified tolerance class M and repeatable results. What corner radius should be selected for finishing? The supplied 0.4 mm corner radius on the DNMG150604-NFT WSM20S balances edge strength and surface finish; for finer finishes, select a smaller radius where the holder and process allow. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150604-NMS WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, consistent chip control and a geometry optimised for stainless steel to maintain steady production rates; order the insert directly via Metav Werkzeuge or ask the consultants for cutting-parameter recommendations. DNMG150604-NMS WSM01 turning insert — Tiger‑tec Silver, rhombic 55° (Walter Tools) The DNMG150604-NMS WSM01 is a coated indexable turning insert designed for stable machining of stainless steel and heat‑resistant superalloys in both roughing and finishing operations Tiger‑tec Silver coating for long life WSM01 grade for stainless steel and superalloys Rhombic 55° form with 0.4 mm corner radius 0° negative rake for stable cutting Precise cutting in demanding materials for reliable throughput The combination of the Tiger‑tec Silver coating and the WSM01 carbide grade delivers a balance between wear resistance and edge strength that is especially valuable when machining stainless steel. The coating reduces abrasive wear and thermal damage while the substrate preserves a robust cutting edge; this means fewer tool changes and more consistent component tolerances. For production environments where process stability and repeatable surface quality are crucial, the insert’s design reduces the risk of built‑up edge and minimises unexpected rework. Geometry engineered for chip control and surface finish The rhombic 55° form and the 0.4 mm corner radius provide a versatile cutting profile that supports both medium‑depth cuts and fine finishing passes. Coupled with the NMS chipbreaker, this geometry promotes predictable chip formation and evacuation, lowering the likelihood of chip snarling in long, uninterrupted cuts. The 0° negative rake increases the insert’s mechanical stability under heavy loads, which helps maintain dimensional accuracy and a repeatable surface finish across production batches. Fewer interruptions, higher productivity A grade optimised for tough alloys and stainless steel means the insert sustains cutting performance across a range of cutting speeds and feeds. Longer edge life and steady chip behaviour translate into less downtime for tool changes and fewer scrap parts. In process‑critical settings where throughput and cost per part are measured closely, this insert supports a verifiable reduction in tooling interventions and contributes to an improved overall equipment efficiency. Practical application and handling for workshop integration The insert suits standard indexable turning toolholders that accept DNMG‑style geometry, enabling straightforward integration into existing tool sets. Its Tiger‑tec Silver series pedigree ensures compatibility with the routines used for coated carbide grades, and the NMS breaker makes it appropriate for operations that require both controlled chip breaking and surface integrity. For users transitioning from general‑purpose grades, selecting cutting data that emphasises stable feeds and adequate coolant or lubrication will enhance performance and extend tool life. Contact Metav Werkzeuge for tailored application advice on the Walter Tools DNMG150604-NMS WSM01 turning insert, including recommended cutting data and batch availability — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: DNMG150604-NMS-WSM01-WALTER Label: Drehwendeschneidplatte DNMG150604-NMS WSM01 Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Corner radius: 0.4 mm Plate size: 15 mm Plate thickness: 06 Free rake angle: 0° (negative) Tolerance class: M Materials & features Coating: Tiger‑tec Silver (coated carbide) Grade: WSM01 Chipbreaker: NMS Plate form: Rhombus 55° Material suitability: S / M (heat‑resistant superalloys and stainless steel) Product type: Indexable turning insert FAQ What materials is this insert suitable for? The DNMG150604‑NMS WSM01 insert is specified for machining stainless steel and heat‑resistant superalloys (groups M and S) in accordance with its WSM01 grade and Tiger‑tec Silver coating. How does the 0° negative rake affect cutting behaviour? A 0° negative rake increases edge robustness and resistance to mechanical shock, improving stability during heavy interrupted cuts and contributing to a more consistent surface finish with the DNMG150604‑NMS WSM01. Which chipbreaker is fitted and what benefit does it bring? The insert features the NMS chipbreaker, which promotes controlled chip formation and evacuation, reducing the risk of chip entanglement and enhancing process reliability. Is the insert suitable for finishing as well as roughing? Yes — the rhombic 55° geometry with a 0.4 mm corner radius offers versatility for both medium‑depth roughing and finishing passes when appropriate cutting parameters are used. Can this insert be used in standard DNMG toolholders? The geometry conforms to the DNMG family and is compatible with standard toolholders designed for DNMG indexable inserts, allowing easy retrofitting into existing setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
DNMG150604-NMS WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Silver coating and the WSM10S grade for reliable machining of stainless steel and heat‑resistant alloys; the NMS chipbreaker and 0.4 mm corner radius deliver stable chips and improved edge life. Order directly via Metav Werkzeuge or request application advice from our consultants. DNMG150604-NMS WSM10S – Turning insert, Tiger·tec Silver, for stainless steel and superalloys | Walter Tools The DNMG150604-NMS WSM10S is a rhombic 55° indexable turning insert engineered for demanding turning operations in stainless steel and heat‑resistant superalloys. Tiger·tec Silver coating for extended tool life Optimised NMS chipbreaker for stable chips Rhombic 55° geometry for versatile turning 0° negative rake with 0.4 mm corner radius High-performance grade for demanding materials The combination of the WSM10S grade and the Tiger·tec Silver coating is designed to resist the thermal and mechanical stresses typical of stainless steel and superalloys. The coated carbide composition provides enhanced wear resistance and improved thermal stability, which reduces flank wear and supports consistent tool life. For production environments where repeatability and predictable performance matter, this indexable insert offers a measurable improvement in process stability and reduces the risk of unscheduled tool changes. Geometry that balances versatility and strength The rhombic 55° shape with a 0.4 mm corner radius and 0° (negative) free angle delivers a robust cutting edge suitable for a range of turning tasks. The geometry enables secure seating in a wide variety of tool holders and supports both moderate and heavier cuts while maintaining dimensional accuracy. The small corner radius contributes to a good surface finish without sacrificing edge strength, making the insert suitable for finishing passes as well as light roughing in challenging materials. Chip control and process efficiency Equipped with the NMS chipbreaker, the insert promotes reliable chip formation and evacuation when machining sticky or ductile materials. Stable chips lower the risk of built‑up edge and improve surface quality, which in turn reduces downstream rework. The chipbreaker geometry is optimised for the WSM10S grade, offering consistent performance across varying cutting parameters and supporting higher productivity through fewer interruptions. Practical benefits and typical applications This indexable plate is particularly suited to turning operations on stainless steel and heat‑resistant superalloys where thermal resilience and edge reliability are priorities. Typical uses include shaft turning, pump components and general engineering parts made from tough alloys. The clear specification and proven grade technology simplify process planning: tool selection is guided by the WSM10S designation and the insert’s geometry, helping to achieve reproducible results and good surface integrity. Contact Metav Werkzeuge for tailored application advice and availability of the Walter Tools DNMG150604-NMS WSM10S turning insert Technical Data SKU: DNMG150604-NMS-WSM10S-WALTER Designation: DNMG150604-NMS ISO designation: DNMG150604-NMS WSM10S Series: Tiger-tec Silver Grade: WSM10S Geometry: Rhombic 55° Corner radius: 0.4 mm Free angle: 0° (negative) Chipbreaker: NMS Plate size: 15 Thickness: 06 Tolerance class: M Material suitability: S / M Numbers Corner radius: 0.4 mm Plate size: 15 Thickness: 06 Free angle: 0° Tolerance class: M Special features Tiger·tec Silver coating WSM10S coated carbide grade Rhombic 55° indexable insert Negative rake geometry NMS chipbreaker for controlled chips Suitable for stainless steel and superalloys FAQ What materials is the insert suitable for? The DNMG150604-NMS WSM10S by Walter Tools is suited to stainless steel and heat‑resistant superalloys (ISO groups M and S), offering thermal stability and reliable chip control. How does the NMS chipbreaker affect machining? The NMS chipbreaker on this insert promotes consistent chip formation and evacuation, which reduces built‑up edge and helps maintain surface quality during turning with the WSM10S grade. Is the geometry suitable for finishing operations? Yes. The rhombic 55° form with a 0.4 mm corner radius provides a balanced edge for good surface finish and accurate turning, making it suitable for finishing as well as light roughing. Can the insert be used in standard tool holders? The DNMG150604-NMS geometry conforms to common indexable insert standards and is compatible with tool holders designed for DNMG inserts; ensure correct seat and clamping for optimal performance. What are the main advantages of the Tiger·tec Silver series? Tiger·tec Silver coatings enhance wear resistance and thermal stability, extending tool life and supporting consistent performance when machining demanding materials with the WSM10S grade. Walter Tools: The Walter AG (marketed as Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is original, brand‑new goods of Walter Tools. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
DNMG150604-NMS WSM20S WSM20S Wendeplatten - Walter Tools
The combination of a Tiger·tec Silver coated grade and a robust NMS chipbreaker delivers consistent productivity in difficult-to-machine alloys while reducing downtime; order inserts via Metav Werkzeuge or consult their specialists for application-specific advice. DNMG150604-NMS WSM20S indexable turning insert — 0° negative rake, 0.4 mm nose radius — Walter Tools The DNMG150604-NMS WSM20S is an indexable turning insert engineered for secure chip control and edge stability when machining rostfreier Stahl and heat‑resistant superalloys. Tiger·tec Silver coated carbide grade WSM20S Optimised for rostfreier Stahl and superalloys Rhombic 55° form with 0.4 mm nose radius 0° negative rake for enhanced edge stability Delivering reliable productivity in demanding materials The Walter Tools grade WSM20S, part of the Tiger·tec Silver series, combines a coated carbide substrate with a geometry tailored for difficult-to-machine materials. The formulation supports stable chip control and helps to prevent built-up edge formation when working with rostfreier Stahl and nickel‑based alloys. The result is a predictable tool life and fewer unplanned tool changes, which directly benefits throughput and process efficiency. In industrial turning, consistent performance in challenging materials translates into reduced cycle-time variability and improved overall equipment effectiveness. Precision surface quality with a compact geometry The rhombic 55° form and 0.4 mm nose radius are designed to balance edge strength with the ability to generate a fine surface finish on critical components. A negative 0° rake improves the resistance of the cutting edge under heavy thermal load, which is common when machining superalloys and rostfreier Stahl. This geometry is particularly useful for finishing passes where dimensional control and surface integrity are priorities, enabling tighter tolerances without compromising edge life. Process stability through targeted chip control The NMS chipbreaker is configured to shape and evacuate chips efficiently under the cutting conditions typical for high‑alloy materials. Controlled chip formation reduces the risk of recutting and helps to maintain consistent surface quality. For production environments where repeatability matters, the combination of chipbreaker and Tiger·tec Silver coating contributes to a stable cutting edge and predictable wear behaviour, supporting longer productivity windows between index changes. Integration and handling benefits for workshops The insert's ISO designation and standard DNMG form ensure straightforward integration into widely used toolholder systems. The designation code signals the geometry and size family, simplifying procurement and inventory management for toolrooms. With the solid backing of Walter Tools' portfolio, the insert supports scalable process planning—from one‑off repairs to serial production—by offering a known, repeatable performance envelope for rostfreier Stahl and heat‑resistant superalloys. Contact Metav Werkzeuge for tailored cutting data and to source Walter Tools Tiger·tec Silver WSM20S inserts for demanding rostfreier Stahl and superalloy applications Technical data Article number: DNMG150604-NMS-WSM20S-WALTER ISO designation: DNMG150604-NMS WSM20S Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Inscribed circle: 15 mm Corner radius: 0.4 mm Rake angle: 0° (negative) Thickness code: 06 Tolerance class: M Special features Grade: WSM20S Chipformer: NMS Form: Rhombus 55° Execution: G Material suitability: S / M Application focus: rostfreier Stahl, heat‑resistant superalloys Coated carbide technology for improved edge life FAQ Is this insert suitable for rostfreier Stahl? Yes. The WSM20S grade in the DNMG150604‑NMS geometry is specifically intended for rostfreier Stahl and provides improved chip control and edge stability for these materials. What advantages does the 0° negative rake offer? A 0° negative rake increases cutting edge strength and heat resistance; for the DNMG150604‑NMS WSM20S this helps to maintain a stable cutting edge when machining heat‑resistant alloys and heavy sections. How does the NMS chipbreaker affect machining? The NMS chipbreaker guides chips into compact, manageable forms to reduce recutting and assist safe evacuation, enhancing process reliability with the WSM20S grade. Can this insert be used for finishing operations requiring fine surface finish? Yes. The 0.4 mm nose radius and rhombic 55° form support good surface quality on finishing passes while retaining sufficient robustness for rostfreier Stahl and similar alloys. What is the correct way to reference this article when ordering? Use the full SKU DNMG150604‑NMS‑WSM20S‑WALTER or the ISO designation DNMG150604‑NMS WSM20S to ensure the correct insert and grade are supplied. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is original, factory‑new merchandise from the manufacturer.
DNMG150608-FM5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating and the rhombic 55° geometry for stable, reproducible machining of stainless steels; order the insert directly via Metav Werkzeuge or contact our consultants for application support. DNMG150608-FM5 WMP20G — Turning insert, Tiger·tec Gold coating, Rhombic 55° (Walter Tools) A robust DNMG150608-FM5 WMP20G indexable turning insert designed for demanding stainless steel machining where secure chip control and long edge life are essential. Tiger·tec Gold coated carbide for durable edges Optimised chipformer FM5 for secure chip control Rhombic 55° geometry with 0.8 mm corner radius Suited for stainless steel (ISO M) under robust cuts High productivity for stainless steel machining The combination of the Tiger·tec Gold coating and the WMP20G carbide grade provides enhanced thermal resistance and stable edge integrity when machining austenitic and other ductile stainless steels. The coated substrate reduces the tendency for built-up edge and supports a predictable wear pattern under medium to robust cutting conditions. For production environments that demand repeatable part quality, this ensures fewer tool changes and more consistent cycle times. Geometry that improves process security and surface quality The rhombic 55° insert shape paired with a 0.8 mm corner radius delivers a balance between robustness and finishing capability. The negative clearance (0°) increases insert support in the pocket, making it suitable for heavier cuts and interrupted turning. The corner radius influences cutting forces and surface finish: a 0.8 mm radius increases edge strength for longer tool life while still allowing acceptable surface quality on turned components. Chip control and reduced machining interruptions Equipped with the FM5 chipformer, this insert promotes reliable chip control in materials prone to long, stringy chips. Effective chip control reduces rework and spindle interruptions and contributes to consistent surface finish across batch production. In combination with the coated substrate, the chipbreaker design helps evacuate chips efficiently and supports higher metal removal rates without sacrificing process reliability. Compatibility, handling and workshop benefits The DNMG form factor fits standard turning toolholders and is available under the Walter Tools Tiger·tec Gold series, offering a practical solution for workshops processing stainless steel components. The insert’s classification for ISO group M signals its suitability for materials that generate high temperatures and require secure chip formation. Adoption of this insert can lead to improved throughput, fewer tool changes and greater confidence in daily production planning. Contact Metav Werkzeuge for tailored application advice or to request the DNMG150608-FM5 WMP20G from Walter Tools — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: DNMG150608-FM5-WMP20G-WALTER Designation: DNMG150608-FM5 WMP20G Product type: Drehwendeschneidplatte / Turning insert Brand: Walter Tools Series: Tiger·tec Gold Facts Plate shape: Rhombus 55° Plate size: 15 Plate thickness: 06 Corner radius: 0.8 mm Clearance angle: 0° (negative) Tolerance class: M Special features Grade: WMP20G Chipbreaker: FM5 Coating/technology: Tiger·tec Gold (coated carbide) Application group: ISO M — stainless steel suitability Execution: G FAQ Which materials is this insert intended for? The DNMG150608-FM5 WMP20G is specified for ISO group M applications and is especially suited to machining stainless steel under medium to robust conditions. What is the benefit of the Tiger·tec Gold coating? The Tiger·tec Gold coating on the WMP20G grade increases thermal stability and wear resistance, supporting longer edge life and more consistent machining results with the DNMG150608-FM5 insert. How does the FM5 chipformer affect production? The FM5 chipbreaker enhances chip control in ductile materials, reducing the risk of entanglement and machine interruptions and contributing to better surface finishes and process reliability with this insert. Is the rhombic 55° geometry suitable for finishing? The rhombic 55° form with a 0.8 mm radius offers a compromise between strength and finishing capability; it provides robust performance for semi-finishing and many finishing tasks while improving tool life. Which toolholders are compatible with DNMG inserts? Standard turning toolholders designed for DNMG indexable inserts accept DNMG150608-FM5 WMP20G; select a holder that provides full pocket support for negative-clearance inserts to ensure process security. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product from the manufacturer.
DNMG150608-FM5 WMP20S WMP20S Wendeplatten - Walter Tools
Benefit from the combination of a coated carbide grade designed for rostfreier Stahl, a proven FM5 chipbreaker and a stable 0.8 mm corner radius for consistent edge life and process reliability; order the insert directly via Metav Werkzeuge or consult our technical team for application support. DNMG150608-FM5 WMP20S — Turning indexable insert, Tiger‑tec Silver, for rostfreier Stahl (Walter Tools) DNMG150608-FM5 WMP20S is a negative‑rake turning insert engineered for reliable stainless‑steel machining in medium to robust conditions Tiger‑tec Silver coated grade WMP20S FM5 chipbreaker for controlled chips Negative rake 0° for stable cutting forces Rhombic 55° form with 0.8 mm corner radius Stable cutting in rostfreier Stahl for uninterrupted production The combination of the Tiger‑tec Silver coating and the WMP20S grade provides improved thermal resistance and wear control when machining rostfreier Stahl, materials known for work hardening and high heat generation. The coated carbide substrate promotes a reliable cutting edge under medium to robust conditions, which translates into fewer interruptions and a steadier process flow. The FM5 chipbreaker supports predictable chip formation, reducing the risk of built‑up edge and improving cycle stability. Predictable edge life through geometry and edge preparation The insert’s rhombic 55° geometry and negative rake 0° are selected to deliver consistent cutting forces and a robust cutting edge in demanding turning operations. The 0.8 mm corner radius moderates stress concentration at the cutting edge, extending tool life on interrupted cuts and when facing variations in material hardness. These geometric choices favour repeatable results and reduce the need for frequent tool changes, improving shopfloor productivity. Practical benefits of the FM5 chipbreaker in production A well‑matched chipbreaker such as FM5 controls chip flow and cross‑section, which is particularly important for long turning passes and deep cuts in rostfreier Stahl. Controlled chips help protect the workpiece surface finish and reduce handling time. In practice, this means fewer secondary operations for chip control and lower risk of surface defects, supporting a faster throughput with maintained quality. Application guidance and process reliability This insert is intended for general turning tasks where a coated carbide grade for rostfreier Stahl is required. Its design delivers process security and consistent edge performance, making it suitable for batch production as well as single‑part runs with variable cut conditions. For specific feeds, speeds and toolholder matching, Metav Werkzeuge’s consultants can provide tailored recommendations based on the component geometry and machine capability. Contact Metav Werkzeuge for specific application advice on Walter Tools Tiger‑tec Silver inserts and ensure optimal machining results in rostfreier Stahl Technical data Article number: DNMG150608-FM5-WMP20S-WALTER SKU: DNMG150608-FM5-WMP20S-WALTER Label: Drehwendeschneidplatte DNMG150608-FM5 WMP20S Walter Tools Product type: Turning indexable insert Manufacturer: Walter Tools Grade / sort: WMP20S Series: Tiger‑tec Silver Chipbreaker: FM5 Execution: G Form: Rhombus 55° Dimensions & key values Size: 15 Thickness: 06 Corner radius: 0.8 mm Relief angle: 0° (negative) Special features Coated carbide grade (Tiger‑tec Silver) Suitable for rostfreier Stahl machining FM5 chipbreaker for controlled chip flow Robust edge geometry for reliable performance Rhombic 55° insert form for versatile turning applications FAQ Is this insert suitable for machining stainless steel? Yes. The DNMG150608-FM5 WMP20S insert features the Tiger‑tec Silver coating and a WMP20S grade formulated specifically for machining rostfreier Stahl under medium to robust conditions. What benefit does the FM5 chipbreaker provide? The FM5 chipbreaker on this Walter Tools insert promotes controlled chip formation, improving surface quality and reducing the likelihood of built‑up edge when turning rostfreier Stahl. Can the insert be used with standard toolholders for DNMG inserts? The insert follows the DNMG designation and is compatible with toolholders designed for DNMG‑type inserts; correct toolholder selection and clamping are recommended to realise the described performance. What does the 0° negative rake mean for cutting behaviour? A negative rake of 0° increases edge strength and stabilises cutting forces, favouring robust machining and longer tool life in demanding turning operations. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarked names and designations are the property of their respective owners. Brand names and trademarks are mentioned for explanation only. There is no affiliation between our company and the named manufacturers. The offered article is an original, factory‑new product of the manufacturer.
DNMG150608-FM5 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of a durable, coated carbide grade and a secure chipforming geometry to maintain stable machining of rostfreier Stahl and heat‑resistant alloys; order directly via Metav Werkzeuge or consult our specialists for machining recommendations. DNMG150608-FM5 WSM01 indexable turning insert — Walter Tools (Rhombic 55°, FM5 chipbreaker) DNMG150608-FM5 WSM01 is an indexable turning insert engineered for demanding turning tasks on rostfreier Stahl and high‑temperature alloys, offering a combination of coating technology and robust geometry for reliable tool life and process security Tiger‑tec Silver coating for extended tool life WSM01 grade for rostfreier Stahl and superalloys FM5 chipbreaker for secure chip control Rhombic 55° geometry with 0.8 mm corner radius Consistent performance on hard‑to‑cut materials The coated carbide composition of the WSM01 grade, part of the Tiger‑tec Silver series, is formulated to resist thermal and mechanical loads encountered when machining rostfreier Stahl and nickel‑base alloys. The coating supports stable chip formation and reduces the tendency for built‑up edge, which is common with these materials; the result is longer intervals between indexings and fewer process interruptions. For production environments where material mix includes heat‑resistant superalloys or titanium, this insert helps to maintain cutting forces within predictable limits, enabling a steady cycle time and improved repeatability. Secure chip control and reliable surface quality The FM5 chipbreaker combined with the Rhombic 55° profile and a 0.8 mm corner radius provides a controlled shearing action that improves evacuation of chips and minimises the risk of entanglement. The negative rake 0° design enhances edge strength for interrupted cuts and heavy depths of cut, delivering a consistent workpiece finish and reducing the need for secondary operations. In short runs and batch production alike, the geometry promotes process stability and helps to achieve repeatable surface quality with lower scrap rates. Productivity through predictable edge life and process security Specified tolerance class M and the engineered cutting edge ensure robust behaviour under thermal stress and mechanical loading, which translates into extended edge life and predictable tool wear. As a result, tool indexing schedules can be standardised, tool costs better forecasted and overall floor productivity increased. The insert integrates easily into standard toolholders for indexable tooling systems; combined with the reputation of Walter Tools, it supports a dependable machining strategy for rostfreier Stahl and high‑temperature alloys without extensive process requalification. Contact Metav Werkzeuge to discuss toolholder pairing, optimal cutting data for rostfreier Stahl and superalloys, or to request a tailored machining recommendation from our specialists. Metav Werkzeuge: Parkring 45, 46446 Emmerich; +49 2822 7131930; info@metav-werkzeuge.com Technical data SKU: DNMG150608-FM5-WSM01-WALTER Designation: DNMG150608-FM5 Series: Tiger‑tec Silver Grade: WSM01 Manufacturer: Walter Tools Product type: indexable turning insert ISO designation: DNMG150608-FM5 WSM01 Dimensions & core data Plate size: 15 Plate thickness: 06 Corner radius: 0.8 Relief angle: 0° (negative) Plate form: Rhombus 55° Tolerance class: M Features & applications Coated carbide grade Chipbreaker: FM5 Version: G Suitable for rostfreier Stahl Applicable to heat‑resistant superalloys and titanium Optimised for secure chipforming and process stability FAQ What materials is this insert intended for? The DNMG150608‑FM5 WSM01 insert is designed primarily for rostfreier Stahl and is also suitable for heat‑resistant superalloys and titanium, where its coated carbide grade and geometry provide improved chip control and edge stability. How does the FM5 chipbreaker benefit production? The FM5 chipbreaker on this indexable insert promotes consistent chip formation and evacuation, reducing the risk of chip jamming and improving process security during continuous and interrupted turning operations. Is the insert compatible with standard DNMG toolholders? Yes, the geometry and dimensions follow established DNMG conventions, allowing straightforward integration into standard indexable turning toolholders for secure clamping and reliable repeatability. What advantage does the Tiger‑tec Silver series bring? The Tiger‑tec Silver series coating enhances resistance to thermal and abrasive wear, which contributes to longer edge life and steadier cutting conditions when machining challenging materials like rostfreier Stahl and superalloys. Which cutting conditions are recommended for initial setup? For initial parameters, adopt conservative cutting speeds and feeds appropriate for rostfreier Stahl and then increase within machine and process limits based on observed wear and surface finish; Metav Werkzeuge can provide tailored starting data. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original factory‑new product of the manufacturer.
DNMG150608-FM5 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WSM10S grade for reliable machining of high‑temperature alloys and stainless steel; the combination of stable chip control and a robust edge reduces downtime and improves workpiece quality. Order directly via Metav Werkzeuge or consult the sales team for application-specific recommendations. DNMG150608-FM5 WSM10S – Indexable turning insert, Tiger·tec Silver, 0° negative, Walter Tools The DNMG150608-FM5 WSM10S is a precision indexable turning insert designed for secure chip formation and durable edge life when machining stainless steel and heat‑resistant alloys in industrial turning applications Tiger·tec Silver coating for high wear resistance WSM10S grade optimised for stainless steel Rhombic 55° geometry with 0.8 mm corner radius FM5 chipbreaker for secure chip control High productivity through advanced coating and grade The combination of the Tiger·tec Silver coating with the WSM10S carbide grade provides a clear productivity advantage when machining demanding materials. The coating enhances thermal resistance and reduces flank wear, while the substrate material maintains a stable cutting edge under elevated cutting temperatures. This results in longer tool life and fewer index changes, which directly supports continuous production and lowers overall operating costs. Geometry tuned for chip control and surface finish A rhombic 55° plate form with a 0.8 mm corner radius and a 0° negative rake angle gives the insert mechanical strength and predictable engagement in the cut. The FM5 chipbreaker is engineered for reliable chip formation when processing sticky, work‑hardening materials; this leads to improved surface quality and reduced risk of built‑up edge. The geometry therefore supports both process reliability and consistent finishing performance. Application range and process reliability Marked for material groups M / S, the insert suits stainless steel and heat‑resistant superalloys or titanium, where high cutting temperatures and poor thermal conductivity demand heat‑resistant grades and stable edge geometry. With a tolerance class of M, the insert offers medium tolerance suitable for a balance of precision and robustness in general turning and light finishing operations. This makes it appropriate for component manufacturing in aerospace, energy and stainless‑steel processing. Practical integration and handling benefits The DNMG format conforms to standard clamping systems for indexable turning inserts, allowing straightforward retrofitting into existing toolholders with the same seat geometry. The plate size and thickness provide a solid contact area for repeatable positioning, and the negative rake reduces edge chipping risks under interrupted cuts. Specifying this WSM10S insert simplifies tooling lists where stainless steel machining is frequent and consistent performance is required. Discuss application requirements with Metav Werkzeuge to ensure the Walter Tools DNMG150608‑FM5 WSM10S insert matches the specific stainless steel grades and cycle times in use Technical data SKU: DNMG150608-FM5-WSM10S-WALTER Designation: DNMG150608-FM5 WSM10S Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Plate form: Rhombus 55° Plate size: 15 Thickness: 06 Corner radius: 0.8 mm Rake angle: 0° (negative) Tolerance class: M Special features Tiger·tec Silver coating WSM10S grade (coated carbide) FM5 chipbreaker Suitable for stainless steel and heat‑resistant alloys (S / M) Execution: G FAQ What materials is this insert suitable for? The DNMG150608‑FM5 WSM10S is specified for material groups M and S, making it suitable for machining stainless steel and heat‑resistant superalloys or titanium under industrial turning conditions. What benefit does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating increases thermal resistance and wear protection on the cutting edge, which improves the service life of the Walter Tools insert during high‑temperature operations. How does the FM5 chipbreaker affect machining? The FM5 chipbreaker promotes controlled chip formation on demanding materials, reducing the risk of built‑up edge and supporting consistent surface finish and process stability for the DNMG150608‑FM5 WSM10S. Is the insert suitable for interrupted cuts? The negative rake and robust geometry of this insert improve resistance to edge chipping in interrupted cuts, offering greater reliability when machining difficult stainless steel components. Which tolerance class does the insert have and what does it mean? Tolerance class M denotes a medium tolerance level, balancing repeatable positioning with mechanical robustness in general turning applications using this Walter Tools insert. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, factory‑new goods from the manufacturer Walter Tools.
DNMG150608-FM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver reliability, the WSM20S grade and the robust Rhombic design for stable cutting in demanding applications; order the DNMG150608-FM5 WSM20S directly via Metav Werkzeuge or ask our consultants if needed. DNMG150608-FM5 WSM20S indexable turning insert — Walter Tools, Tiger·tec Silver, for rostfreier Stahl and superalloys DNMG150608-FM5 WSM20S is an indexable turning insert designed for reliable performance in rostfreier Stahl and heat-resistant alloys, offering a coated carbide grade optimised for stable chip formation and long tool life Tiger·tec Silver coated carbide for wear resistance WSM20S grade for rostfreier Stahl and superalloys Rhombic 55° form for versatile insert positioning FM5 chipbreaker for consistent chip control Increased process security for demanding materials The WSM20S grade, integrated in the Tiger·tec Silver series, is a coated carbide engineered to cope with the specific challenges of rostfreier Stahl and heat-resistant superalloys. Its coating system and substrate combination support stable chip formation, reduce built-up edge and extend the effective cutting life. For production environments where part consistency and reduced rework are priorities, this insert delivers measurable improvements in process reliability and reproducibility while maintaining acceptable surface quality. Geometry tailored to durability and surface finish The rhombic 55° format combined with a 0° (negative) rake angle and a 0.8 mm corner radius provides a robust cutting edge that resists chipping under interrupted cuts and heavy engagement. The FM5 chipbreaker is designed to promote predictable chip flow and reduce vibration, which aids in achieving consistent finishes and dimensional control. Thanks to this geometry, toolholders maintain stability and cutter changes become a controlled, low-risk step in the workflow. Practical application advice and efficiency gains This insert is intended for turning operations where material behaviour demands both edge stability and thermal resistance. Use in medium to heavy finishing passes or light roughing of difficult-to-machine alloys is typical; the combined properties of the coating and substrate help to lower downtime through fewer indexings and predictable wear patterns. Pairing the insert with a properly configured holder and a cooling strategy tuned to the workpiece material results in longer service intervals and improved productivity. For specific cutting parameter recommendations and holder compatibility, consult Metav Werkzeuge for tailored guidance. Contact Metav Werkzeuge for tailored application advice and fast supply of Walter Tools indexable inserts. Technical data SKU: DNMG150608-FM5-WSM20S-WALTER Designation: DNMG150608-FM5 ISO name: DNMG150608-FM5 WSM20S Core data Shape: Rhombic 55° Corner radius: 0.8 mm Rake: 0° (negative) Thickness: 06 Size: 15 Special features Grade/series: WSM20S, Tiger·tec Silver Chipbreaker: FM5 Substrate/coating: Coated carbide Material suitability: rostfreier Stahl (M), heat-resistant superalloys/titanium (S) FAQ Which materials is this insert suitable for? The DNMG150608-FM5 WSM20S is suitable for rostfreier Stahl (ISO group M) and for heat-resistant superalloys and titanium (ISO group S), thanks to the Tiger·tec Silver coated carbide and the WSM20S grade design. What advantage does the FM5 chipbreaker provide? The FM5 chipbreaker promotes controlled chip formation and evacuation, improving consistency in cutting forces and surface finish while reducing the risk of entangling chips. How does the 0° negative rake affect machining? A 0° (negative) rake enhances edge strength and resistance to chipping, making the insert better suited to interrupted cuts and tougher engagements where a robust cutting edge is required. Which toolholders are compatible with this insert? This insert conforms to the DNMG seating standard and is compatible with turning toolholders designed for DNMG inserts; verify seat size and clamping method with the holder specification. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (marketed as Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners. The mentioned brand names are used for explanatory purposes only and do not indicate any affiliation between our company and the brand owner. It is an original, brand-new product from the manufacturer.
DNMG150608-FP5 WEP10C WEP10C Wendeplatten - Walter Tools
The combination of a WEP10C cermet grade and the FP5 chipbreaker provides stable chip formation and consistent edge life for finishing and semi-finishing turning operations; order via Metav Werkzeuge or consult the technical team for application-specific advice. DNMG150608-FP5 WEP10C — Indexable turning insert, Walter Tools, Cermet FP5 A DNMG150608-FP5 WEP10C indexable turning insert engineered for precision finishing and reliable chip control in general turning applications with a rhombic 55° form. Cermet grade WEP10C for stable cutting performance FP5 chipbreaker for predictable chip control Rhombic 55° shape for versatile turning operations 0° negative clearance for robust cutting edge Predictable chip control for productive turning The insert’s FP5 chipbreaker is designed to produce short, controllable chips under a variety of cutting conditions; this leads to reduced rework and safer machining cycles. In practice, the chip geometry is stabilised, which simplifies removal and reduces the risk of chip entanglement. The result is improved process reliability and more consistent cycle times when compared with less specialised geometries, making the insert suitable where predictable behaviour is required. Cermet grade delivering better edge life and surface finish The WEP10C cermet grade combines hardness and thermal stability to support high-quality surface finishes in finishing operations. Cermet materials typically offer finer grain structure than conventional carbides, which contributes to improved wear resistance and a superior workpiece appearance. Selection should be made against the product matrix to confirm suitability for specific workpiece materials, since the grade is optimised for finishing and may outperform alternate grades in dimensional stability and edge integrity. Geometry and robustness for varied turning tasks The rhombic 55° form together with 0° negative clearance creates a balance between access to the cutting zone and a strong cutting edge that tolerates interruptions. A 0.8 corner radius supports smoother transitions on external contours and helps maintain tool life in medium-duty passes. The insert thickness and shape contribute to clamping stability and predictable vibration behaviour; these geometric characteristics are especially relevant where surface quality and repeatability are priorities. Integration into workshop processes and quality control Belonging to the Walter Cermet series and supplied in M tolerance, the insert is compatible with standard indexable tooling systems used in turning applications. Traceable batch performance and repeatable edge life make the component suitable for systematic tool management and replacement cycles. For best results, the tool’s material compatibility and cutting data should be verified against the manufacturer's matrix; such verification supports optimal feed and speed settings and prolongs productive uptime. Contact Metav Werkzeuge for tailored application recommendations and ordering; technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: DNMG150608-FP5-WEP10C-WALTER Designation: DNMG150608-FP5 WEP10C Product type: Indexable turning insert Manufacturer: Walter Tools Series: Walter Cermet Core technical figures Size: 15 Thickness: 06 Corner radius: 0.8 Clearance angle: 0° (negative) Shape: Rhombus 55° Tolerance class: M Features and materials Grade: WEP10C Chipbreaker: FP5 Material: Katalogabhängig Execution: G Series description: Cermet cutting material FAQ What type of machining is this insert intended for? This indexable turning insert is intended for finishing and semi-finishing turning tasks where stable chip control and a fine surface finish are required; the DNMG150608-FP5 WEP10C excels in these roles. How does the FP5 chipbreaker affect process reliability? The FP5 chipbreaker produces predictable, short chips which reduce entanglement and support safer, more consistent machining cycles when using the Walter Tools insert. Is the WEP10C grade suitable for roughing operations? The WEP10C cermet grade is optimised for finishing; suitability for heavy roughing should be checked against the manufacturer's product matrix and specific application requirements. What advantages does the rhombic 55° shape provide? The rhombic 55° geometry offers good accessibility for a range of external turning profiles while preserving edge strength, making it versatile across common turning tasks. How should material compatibility be verified before use? Material compatibility and cutting data should be confirmed in the product matrix or technical documentation provided by the manufacturer to ensure the DNMG150608-FP5 WEP10C matches the workpiece material and desired surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names of Walter Tools are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product from the manufacturer.
DNMG150608-FP5 WKP01G Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger‑tec Gold wear protection and the FP5 chipbreaker for reliable chip control and longer edge life; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. DNMG150608-FP5 WKP01G Turning insert – Tiger‑tec Gold, FP5 chipbreaker | Walter Tools The DNMG150608-FP5 WKP01G is a rhombic 55° indexable turning insert designed for medium to heavy turning in Stahl and cast iron, providing stable edge life and consistent chip formation. Tiger‑tec Gold coating for high wear resistance WKP01G grade for reliable edge stability FP5 chipbreaker for controlled chip formation Rhombus 55° shape, 0.8 mm corner radius Longer tool life through advanced coating technology The Tiger‑tec Gold coating combined with the WKP01G carbide grade delivers enhanced resistance to abrasive and adhesive wear, which translates into longer service intervals and fewer tool changes. As a coated carbide solution, the insert tolerates the thermal and mechanical loads typical of turning operations in demanding materials, reducing unplanned production stops. This wear protection is particularly effective in cyclic or interrupted cuts where edge stability is critical, helping to maintain dimensional consistency over extended runs. Consistent chip control and surface quality from optimised geometry The FP5 chipbreaker and rhombus 55° geometry were developed to control chip form and evacuation during turning, producing short, segmented chips in cast components and stable swarf in tough Stahl cuts. The 0° (negative) rake geometry enhances strength at the cutting edge for interrupted cuts and roughing applications, while the 0.8 mm corner radius balances edge robustness with achievable surface finish. Together these features reduce the need for secondary operations and support predictable part quality across batch production. Production benefits: predictable performance and higher throughput Engineered for productivity, the insert supports steady cutting parameters and repeatable results, helping to lower unit costs. The combination of a wear-resistant coating and a dedicated chipbreaker improves tool life and process security, which means machines can run longer between interventions and operators can rely on consistent cycle times. Where throughput and repeatability matter, this solution contributes to efficient machining and simplified tool inventory management. Practical application advice and safe handling The insert is intended for use in indexable toolholders compatible with DNMG‑style geometries; correct clamping and a rigid set-up will maximise the benefits of the grade and chipbreaker. For machining data, start conservatively and increase cutting speed and feed while monitoring tool condition and surface finish. If uncertain about optimal parameters for a specific workpiece geometry or alloy, Metav Werkzeuge can provide cutting data and recommendations tailored to the application. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools. For a machining proposal that leverages the Tiger‑tec Gold advantage, contact Metav Werkzeuge for tailored cutting data and ordering assistance — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data SKU: DNMG150608-FP5-WKP01G-WALTER Description: Drehwendeschneidplatte DNMG150608-FP5 WKP01G Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Gold Core specifications Insert shape: Rhombus 55° Insert size: 15 Thickness: 06 Corner radius: 0.8 mm Rake angle: 0° (negative) Tolerance class: M Materials & features Grade: WKP01G Chipbreaker: FP5 Coating/technology: Tiger‑tec Gold Suitable for: P / K (Stahl and cast iron) Execution: G Material group: P / K FAQ What materials is this insert suitable for? The DNMG150608-FP5 WKP01G insert is designed for machining P / K classes, meaning it is suitable for Stahl (P) and cast iron (K) applications, benefiting from the Tiger‑tec Gold coating for wear resistance. How does the FP5 chipbreaker affect chip formation? The FP5 chipbreaker creates short, controllable chips in cast iron and stable segmented chips when machining Stahl, improving evacuation and reducing the risk of chip entanglement. Is this insert suitable for interrupted cuts? Yes, the negative 0° rake and 0.8 mm corner radius provide a robust cutting edge that withstands interruptions and adverse cutting conditions, making it appropriate for roughing and interrupted turning. Can the WKP01G grade be used for finishing operations? WKP01G is optimised for wear resistance and edge stability; by selecting appropriate feeds and speeds the insert can achieve good surface finishes, though fine finishing may require smaller corner radii or dedicated finishing grades. Which toolholders are compatible with this insert? Standard holders for DNMG‑style rhombic 55° inserts are compatible; correct clamping and rigidity are essential to exploit the grade and chipbreaker performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com