DNMG150608-RM5 WMP20G WMP20G Wendeplatten - Walter Tools
Compact insert with Tiger·tec Gold coating and an RM5 chipbreaker for reliable stainless steel turning; the rhombic 55° geometry combined with a 0.8 mm corner radius provides a balance of edge strength and versatility. Order the DNMG150608-RM5 WMP20G insert directly via Metav Werkzeuge or consult our specialists for cutting data and application support. DNMG150608-RM5 WMP20G – turning insert, Tiger·tec Gold, 0.8 mm corner radius (Walter Tools) The DNMG150608-RM5 WMP20G is a rhombic 55° indexable insert designed for machining stainless steels under moderate to robust cutting conditions. Tiger·tec Gold coating for improved wear resistance Optimised RM5 chipbreaker for stainless steel machining Rhombic 55° geometry for versatile turning operations 0.8 mm corner radius for enhanced edge strength Consistent performance for stainless steel turning The combination of the Tiger·tec Gold coating and the WMP20G grade provides enhanced resistance to wear when machining stainless steels, where adhesion and high temperatures are common challenges. The coating technology supports a secure chip formation and a stable cutting edge, which reduces the risk of built-up edge and extends usable tool life. This results in fewer tool changes and improved process reliability in series production environments. Robust edge geometry for demanding cuts With a 0° (negative) rake and a 0.8 mm corner radius, the insert is optimised for strength and edge stability during more robust operations. The negative rake increases cutting edge durability under heavier feed rates, while the larger radius spreads cutting forces to reduce chipping. These design choices make the insert suitable for applications where maintaining a repeatable edge life is a priority, particularly in parts where tool deflection must be minimised. Flexible 55° rhombic form for varied turning tasks The rhombic 55° form offers a versatile approach angle that supports a broad range of turning tasks. This geometry enables reliable performance across a sequence of operations, from form turning to interrupted cuts, and provides multiple effective cutting edges per insert to maximise economy. As an indexable insert, this format simplifies inventory management and keeps set-up times low, contributing to overall production efficiency. Process advantages and application guidance The RM5 chipbreaker is configured to promote predictable chips when working with stainless steels, improving swarf control and reducing the likelihood of surface damage. The insert is supplied in the DNMG size family and is intended for secure clamping in standard turning toolholders; correct holder rigidity and appropriate cutting parameters will further enhance the service life of the WMP20G grade. For tailored cutting data and material-specific recommendations, Metav Werkzeuge can provide application support to match machining conditions precisely. Contact Metav Werkzeuge to discuss cutting data and procurement for the Walter Tools DNMG150608-RM5 WMP20G insert and ensure optimal performance in stainless steel turning Technical data Article number: DNMG150608-RM5-WMP20G-WALTER Label: Drehwendeschneidplatte DNMG150608-RM5 WMP20G Walter Tools Manufacturer: Walter Tools Core technical data Corner radius: 0.8 Plate size: 15 Plate thickness: 06 Free angle: 0° (negativ) Tolerance class: M Special features Series: Tiger-tec Gold Grade / Sort: WMP20G Chipbreaker: RM5 Plate form: Rhombus 55° Execution: G Material group: M (suitable for stainless steels) ISO designation: DNMG150608-RM5 WMP20G FAQ Which materials is this insert designed for? The DNMG150608-RM5 WMP20G is specified for stainless steels (material group M) and is formulated to manage the adhesion and heat challenges typical of these alloys. What benefit does the RM5 chipbreaker provide? The RM5 chipbreaker promotes controlled chip formation in stainless steel machining, improving swarf handling and helping to protect the workpiece surface. How does the 0° (negative) rake affect cutting? A 0° (negative) rake enhances edge strength and resistance to chipping under heavier cuts; it favours stable performance but requires suitable clamping and power to the tool. What operations suit the rhombic 55° geometry? The rhombic 55° form is versatile for various turning tasks, offering multiple effective cutting edges and compatibility with standard DNMG toolholders for a wide range of turning applications. How many cutting edges are available per insert and how is it indexed? This DNMG-format indexable insert provides multiple cutting edges that can be rotated or flipped in a standard insert seat to maximise economy and reduce downtime between changes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The product offered is original and factory-new from Walter Tools.
DNMG150608-RM5 WMP20S RM5 Wendeplatten - Walter Tools
Optimise turning of stainless steel with the high-performance WMP20S grade and the proven Tiger·tec Silver coating; the rhombic 55° geometry and RM5 chipbreaker deliver consistent edge stability and reliable chip control. Order the DNMG150608-RM5 WMP20S via Metav Werkzeuge or request specialist application advice from our consultants. DNMG150608-RM5 WMP20S turning insert – Tiger·tec Silver, for stainless steel (Walter Tools) The DNMG150608-RM5 WMP20S is a rhombic 55° indexable turning insert designed for medium to heavy-duty turning of stainless steel, combining a robust cutting edge with a chipbreaker tuned for secure chip formation Tiger·tec Silver coated grade WMP20S Optimised for stainless steel machining Rhombic 55° geometry, 0.8 mm corner radius RM5 chipbreaker for stable chip control Greater process reliability through advanced coating and grade selection The combination of the Tiger·tec Silver coating and the WMP20S cemented carbide grade is engineered for the specific demands of machining stainless steel. Coating technology reduces built-up edge and improves heat resistance, which in turn stabilises the cutting edge under the high temperatures typical for these alloys. As a result, tool life is extended and intervention intervals are reduced, supporting predictable production cycles and lower overall machining costs. Consistent chip control and surface quality with targeted geometry The rhombic 55° form and the RM5 chipbreaker provide a balanced mix of axial and radial cutting forces, promoting controlled chip formation and evacuation. The 0.8 mm corner radius increases edge robustness, which minimises edge chipping during interrupted cuts and heavy engagement. This geometry combination helps to maintain a steady surface finish while allowing comfortable feed rates, translating technical features into tangible productivity gains on the shop floor. Practical benefits for workshop integration and tool handling The insert format DNMG150608-RM5 suits standard turning toolholders and simplifies tool management in mixed-production environments. The negative rake (0°) geometry supports stable cutting under variable conditions and reduces the tendency for chatter in heavier cuts. With a familiar insert designation and a widely used chipbreaker variant, setup times are kept short and operator familiarity accelerates ramp-up on new jobs. For consistent, reliable machining of stainless steel, contact Metav Werkzeuge for an application consultation or request the DNMG150608-RM5 WMP20S through Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data SKU: DNMG150608-RM5-WMP20S-WALTER Article: DNMG150608-RM5 Designation: DNMG150608-RM5 WMP20S Product type: Turning insert Manufacturer: Walter Tools Facts Plate form: Rhombus 55° Corner radius: 0.8 mm Plate size: 15 Plate thickness: 06 Relief/rake: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Silver Grade: WMP20S Chipbreaker: RM5 Material group suitability: stainless steel Execution: G FAQ What materials is this insert intended for? The DNMG150608-RM5 WMP20S is specifically formulated for machining stainless steel and performs well under medium to robust cutting conditions. How does the Tiger·tec Silver coating help in practice? The Tiger·tec Silver coating on the WMP20S grade enhances heat resistance and reduces built-up edge, which improves cutting-edge life and process stability when machining stainless steel. Is the RM5 chipbreaker suitable for continuous turning? Yes, the RM5 chipbreaker is designed for stable chip control during continuous operations and helps maintain surface quality with consistent chip formation. Can the insert be used in standard DNMG toolholders? The DNMG150608-RM5 follows the common DNMG insert geometry and is compatible with standard toolholders designed for DNMG inserts. What advantage does the 0.8 mm corner radius provide? A 0.8 mm corner radius increases edge strength and reduces the risk of chipping in interrupted cuts, supporting higher feed rates and longer tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the brands named. The offered article is an original, factory-new product of the manufacturer.
DNMG150608-RM5 WMP30G RM5 Wendeplatten - Walter Tools
Take advantage of the combination of wear-resistant Tiger·tec Gold grade and a dedicated RM5 chipbreaker for reliable chip control and consistent productivity when machining stainless steel; order the DNMG150608-RM5 WMP30G insert directly via Metav Werkzeuge or consult the team for application advice. DNMG150608-RM5 WMP30G turning indexable insert — RM5 chipbreaker, Tiger·tec Gold grade, for stainless steel (Walter Tools) A robust turning insert: DNMG150608-RM5 WMP30G from Walter Tools, designed for turning applications on stainless steel under medium to heavy conditions. Tiger·tec Gold coating for long tool life Optimised for stainless steel machining RM5 chipbreaker for secure chip control Rhombic 55° geometry for versatile turning 0.8 mm corner radius for increased edge strength Reliable metal‑removal performance for stainless steel components The coated carbide grade WMP30G within the Tiger·tec Gold family delivers a balanced combination of wear resistance and toughness, tailored for the challenges of machining stainless steel. In practice this means improved tool life under the typical demands of austenitic stainless materials, where adhesion, high heat and tendency to form built-up edge can limit productivity. The RM5 chipbreaker is engineered to generate controllable chips and to support continuous machining, which reduces unscheduled interruptions and helps maintain steady cycle times—an immediate benefit for production-focused turning operations. Geometry and edge design that increase stability and process security A rhombic 55° shape combined with a 0° negative relief provides a robust cutting edge for interrupted or stable cuts alike. The 0.8 mm corner radius increases edge strength and contributes to consistent cutting forces, which supports repeatable surface finish and dimensional stability. For operators less familiar with insert geometry: a negative relief means the insert presents a thicker, stronger cutting edge to the workpiece, improving resistance to shock and enabling more aggressive feed or depth-of-cut choices where the tool and machine permit. Practical advantages that reduce downtime and support consistency As an indexable insert built to common turning standards, the unit offers rapid replacement and predictable regrinding intervals, promoting lower tooling cost per part over the life cycle. The combination of the RM5 chipbreaker and coated-carbide WMP30G grade enhances chip control and cutting-edge protection, which together improve process consistency and reduce the frequency of tool-related stoppages. For contract workshops and production shops aiming for high first-pass yield, this insert supports a stable machining window and reliable surface quality with fewer interventions. For tailored application guidance on Walter Tools inserts and fast delivery options, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss workpiece material, holder compatibility and batch requirements Technical data Article number: DNMG150608-RM5-WMP30G-WALTER Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WMP30G SKU: DNMG150608-RM5 WMP30G Core dimensions Plate form: Rhombus 55° Plate size: 15 Plate thickness: 06 Corner radius: 0.8 Relief angle: 0° (negative) Features & applications Coating: Tiger·tec Gold (coated carbide) Chipbreaker type: RM5 Material group suitability: stainless steel (M) Execution: G Typical use: productive turning under medium to robust conditions FAQ Which materials is this insert suitable for? The DNMG150608-RM5 WMP30G insert is specified for stainless steel machining; the WMP30G grade is developed to handle the adhesion and heat characteristics associated with this material group. What advantage does the RM5 chipbreaker offer? The RM5 chipbreaker on the DNMG150608-RM5 helps form controllable chips and maintains stable cutting conditions, supporting continuous turning and reducing the likelihood of chip-related interruptions. How does the 0° negative relief affect performance? A negative 0° relief provides a thicker, stronger cutting edge for the insert, offering improved robustness during heavier cuts or interrupted conditions and enhancing process security. Is the insert suitable for high‑productivity turning? Yes; the combination of Tiger·tec Gold coating and the WMP30G grade is engineered to extend tool life and sustain productive metal removal in machining stainless steel. What does the 0.8 mm corner radius mean for surface finish? A 0.8 mm corner radius increases edge strength and helps maintain consistent cutting forces, which contributes to repeatable surface quality and dimensional stability in turned parts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names belong to their respective owners and are mentioned for clarification only. There is no affiliation between our company and the named manufacturers. The offered item is original, brand-new merchandise from the stated manufacturer.
DNMG150608-RM5 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, a robust cutting edge and consistent chip control provided by the Tiger·tec Silver grade WSM10S; order or request advice via Metav Werkzeuge for seamless integration into production. DNMG150608-RM5 WSM10S indexable turning insert — Tiger·tec Silver, for stainless steels and superalloys | Walter Tools DNMG150608-RM5 WSM10S is a negative‑rake, rhombic 55° indexable turning insert optimised for machining stainless steels and heat‑resistant alloys in demanding production environments Tiger·tec Silver coated carbide Grade WSM10S for stainless and superalloys Rhombic 55° geometry for versatile turning 0.8 mm corner radius for consistent surface finish High‑performance grade for demanding materials The WSM10S grade, part of the Tiger·tec Silver family, is engineered for reliable performance when machining stainless steels and heat‑resistant alloys. The coated carbide substrate combines thermal stability with a wear‑resistant top layer to reduce edge breakdown and adhesive built‑up. This results in consistent tool life and fewer interruptions for tool changes, supporting higher machine utilisation and predictable production output for medium to high‑volume turning operations. Geometry and edge design that improve process stability The rhombic 55° geometry with a 0° (negative) relief angle provides a robust cutting profile that tolerates heavier cuts and interrupted cuts commonly encountered on difficult‑to‑machine parts. The 0.8 mm corner radius delivers a reliable surface finish while preserving edge strength; paired with the RM5 chipbreaker, chip formation is controlled to reduce the risk of tangling and to support automatic chip evacuation. These attributes together enhance reproducibility across batches and reduce rework rates. Productivity gains and economic benefits on the shop floor Designed for industrial turning, this insert supports higher cutting parameters where machine and setup allow, delivering improved material removal rates without compromising edge stability. The coated grade reduces wear mechanisms typical of nickel‑based and titanium alloys, which translates into lower tooling costs per component and less frequent index changes. For CNC turning centres seeking stable, repeatable performance, the design of the insert contributes directly to throughput and predictable downstream processes. Practical integration and application guidance The insert is suitable for finishing and medium turning of stainless steels (M) and heat‑resistant superalloys (S); adapt feeds and speeds to material condition and part geometry for optimal results. Coolant strategy, machine stiffness and holder selection influence outcome—this insert works best in rigid toolholders and clamping systems that ensure minimal vibration. For material‑specific cutting data or batch‑sizing advice, consult the technical information provided or contact Metav Werkzeuge for application support and recommendations. For tailored recommendations and to discuss supply of the Walter Tools DNMG150608-RM5 WSM10S insert with Tiger·tec Silver coating, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DNMG150608-RM5-WSM10S-WALTER Designation: DNMG150608-RM5 WSM10S Product type: Indexable turning insert Manufacturer: Walter Tools Core specifications Insert shape: Rhombus 55° Corner radius: 0.8 mm Relief angle: 0° (negative) Size: 15 Thickness code: 06 Tolerance class: M Special features Grade: WSM10S (Tiger·tec Silver coated carbide) Chipbreaker: RM5 Suitable materials: stainless steels (M), heat‑resistant alloys/titanium (S) Execution: G FAQ Which materials is this insert intended for? The DNMG150608‑RM5 WSM10S insert (Walter Tools indexable turning insert) is designed primarily for stainless steels and heat‑resistant superalloys, as indicated by the M and S material classifications. What advantages does the Tiger·tec Silver coating provide? Tiger·tec Silver on the WSM10S grade improves thermal resistance and wear performance, yielding longer service life and more stable cutting edges when machining demanding alloys. How does the RM5 chipbreaker affect chip control? The RM5 chipbreaker is tuned to promote short, manageable chips under typical turning parameters, improving chip evacuation and reducing the likelihood of rework caused by poor chip formation. What does the DNMG150608 designation mean in practice? The designation describes the insert geometry and size: a rhombic 55° insert with the specified size and thickness code, paired here with a 0.8 mm corner radius and negative relief suitable for a variety of turning tasks. Is this insert suitable for automated production runs? Yes, the insert’s combination of coated carbide grade and robust geometry makes it well suited to automated CNC turning where consistent tool life and repeatability are required. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are cited exclusively for explanatory purposes; there is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer Walter Tools.
DNMG150608-RM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of thermal stability and secure chip control to maintain process reliability in demanding stainless and superalloy applications; order directly via Metav Werkzeuge or consult our specialists for tailored cutting recommendations. DNMG150608-RM5 WSM20S indexable turning insert – Tiger‑tec Silver, for stainless steels and superalloys (Walter Tools) The DNMG150608-RM5 WSM20S is an indexable turning insert engineered for reliable machining of stainless steels (M) and heat‑resistant superalloys (S), offering a balance of edge stability and thermal resistance for productive turning operations. Tiger‑tec Silver coating for heat resistance WSM20S grade for stainless and superalloys RM5 chipbreaker for secure chip control Rhombic 55° form with 0.8 mm corner radius Consistent performance under thermal stress The Tiger‑tec Silver coating and the WSM20S carbide grade combine to deliver improved thermal stability and wear resistance when machining materials that generate high temperatures. Coating technologies like Tiger‑tec Silver reduce flank and crater wear by stabilising the cutting edge at elevated temperatures, which translates into longer tool life and fewer indexings. For process planners, this means more predictable component tolerances and less unplanned downtime, particularly in series production where consistency is critical. Predictable chip formation and process security The RM5 chipbreaker geometry promotes controlled chip breaking and evacuation when turning ductile or work‑hardening materials. A well‑matched chipbreaker reduces the risk of entangling chips, improves surface finish potential and supports stable cutting forces during each pass. Combined with the negative 0° relief angle, this geometry reinforces edge strength, making the insert suitable for applications where secure chip control and reliable edge retention are priorities rather than high‑shear finishing alone. Geometry tailored for strength and versatility The rhombic 55° insert form with a 0.8 mm corner radius offers a compromise between edge robustness and accessibility in shoulder and light profiling operations. The specified plate size and thickness classification ensure compatibility with standard tool holders for this insert format. Classified for tolerance class M, the design supports repeatable seating and positional accuracy in automatic tool changers. Use of this insert in the correct ISO material groups delivers the best combination of cutting performance and predictable edge life. Application guidance and material groups explained This grade is intended for machining ISO group M (stainless steels) and S (heat‑resistant superalloys and titanium) materials. Stainless steels are often tough and prone to built‑up edge; the WSM20S formulation supports safe chip formation and stable cutting edges to mitigate these effects. Superalloys and titanium transfer heat poorly and demand grades that maintain hardness at temperature—this insert’s coating and carbide substrate are selected to address those demands while helping to secure dimensional accuracy over longer tool cycles. For optimised insert selection and cutting data for Tiger‑tec Silver tools, contact Metav Werkzeuge for personalised guidance and ordering via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DNMG150608-RM5-WSM20S-WALTER Designation: DNMG150608-RM5 Product type: Drehwendeschneidplatte (indexable turning insert) Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM20S Core technical data Insert size: 15 Thickness: 06 Corner radius: 0.8 mm Relief angle: 0° (negative) Shape: Rhombus 55° Chipbreaker: RM5 Tolerance class: M Special features Coating: Tiger‑tec Silver Material suitability: S / M (superalloys / stainless steels) Execution: G Applicable for demanding, heat‑generating workpiece materials FAQ Which materials is this insert suitable for? The DNMG150608-RM5 WSM20S indexable turning insert from Walter Tools is designed primarily for ISO groups M (stainless steels) and S (heat‑resistant superalloys and titanium), where thermal stability and edge strength are required. What does the WSM20S designation mean? WSM20S denotes Walter Tools’ coated carbide grade within the Tiger‑tec Silver family; it represents a formulation optimised for heat resistance and stable cutting performance in tough‑to‑machine materials. How does the RM5 chipbreaker affect machining? The RM5 chipbreaker promotes controlled chip segmentation and efficient evacuation, improving surface integrity and reducing the likelihood of chip interference in bore or shoulder turns. How do geometry and relief angle influence use? The rhombic 55° form and 0.8 mm corner radius provide a robust cutting edge for general turning and light profiling, while the 0° negative relief enhances edge strength for interrupted cuts and heavy engagement. Is this insert suitable for finishing passes? Depending on toolholder rigidity and cutting parameters, the grade is capable of producing good finishes; however, its strength and thermal focus make it particularly well suited to semi‑finishing and roughing in stainless and superalloy applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik group. Protected trademarks and brand names are the property of their respective owners and are mentioned here for explanatory purposes only. There is no affiliation between our company and the brand owners. The offered item is an original, factory‑new product of the manufacturer.
DNMG150608-RM5 WSM30S RM5 Wendeplatten - Walter Tools
Take advantage of the high-temperature stability of the WSM30S grade together with the wear-resistant Tiger·tec Silver coating and the RM5 chipbreaker for consistent chip control and longer tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. DNMG150608-RM5 WSM30S indexable turning insert, rhombic 55°, Tiger·tec Silver — Walter Tools The DNMG150608-RM5 WSM30S is a rhombic 55° indexable turning insert designed for secure chip formation and stable cutting when machining rostfreier Stahl and heat-resistant superalloys Tiger·tec Silver coating for heat resistance and wear control Suitable for rostfreier Stahl and superalloys (S / M) Rhombic 55° form for versatile turning operations RM5 chipbreaker for predictable chip control Durable coating and grade for demanding materials The combination of the Tiger·tec Silver coating and the WSM30S cemented carbide grade provides a strong basis for machining rostfreier Stahl and high-temperature alloys. The coating is formulated for thermal stability and improved flank wear resistance, which reduces the risk of built-up edge during continuous cutting. This results in more predictable tool life and fewer interruptions for index changes, supporting efficient production cycles and reduced downtime. Geometry that improves process reliability The rhombic 55° shape with a corner radius of 0.8 mm delivers a balance between edge strength and finishing capability. The geometry supports stable engagement in turning applications and helps maintain dimensional consistency on workpieces. The insert’s negative 0° relief enhances robustness in interrupted cuts and heavier depths of cut, making the insert suitable for a range of roughing and finishing tasks without compromising edge stability. Chip control and surface quality where it matters Equipped with the RM5 chipbreaker, the insert channels chips reliably even when machining materials that tend to produce long, stringy swarf. Better chip control lowers the risk of tool or part damage and contributes to consistent surface results. Operators will notice fewer manual chip interruptions and improved process cleanliness, which together support higher throughput and safer shop-floor conditions. Economic benefits through reduced rework and predictable performance Choosing a coated, application-focused insert reduces unplanned tool changes and rework caused by poor edge behaviour. The WSM30S grade is optimised for adhesion resistance and thermal endurance, which often translates into longer effective edge life in rostfreier Stahl and nickel-based alloys. The result is improved output per insert and better overall cost-efficiency for batch and continuous production runs. Practical handling and compatibility The insert follows the DNMG indexable insert standard and matches tool holders designed for this designation. Its standardised form factor and 06 thickness facilitate quick replacement and inventory management across lathes and turning centres. The insert is an appropriate choice for machining centres seeking a robust, versatile solution without compromising on surface finish or process stability. For application advice, tooling optimisation or to order Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the best grade and geometry for the intended rostfreier Stahl or superalloy application Technical data SKU: DNMG150608-RM5-WSM30S-WALTER Product type: Indexable turning insert (Drehwendeschneidplatte) Brand: Walter Tools Series: Tiger·tec Silver Grade: WSM30S ISO designation: DNMG150608-RM5 WSM30S Facts Size (inscribed circle): 15 mm Corner radius: 0.8 mm Thickness: 06 Relief/clearance: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Silver Chipbreaker: RM5 Material suitability: S / M (heat-resistant superalloys, rostfreier Stahl) Plate form: Rhombus 55° Execution: G FAQ What workpiece materials is this insert best suited for? The DNMG150608-RM5 WSM30S is designed for rostfreier Stahl and heat-resistant superalloys (S / M), offering thermal and edge stability for these challenging materials. How does the Tiger·tec Silver coating affect tool life? The Tiger·tec Silver coating increases thermal resistance and reduces flank wear, which typically extends edge life and improves consistency compared with uncoated grades. What advantage does the RM5 chipbreaker provide? The RM5 chipbreaker produces controlled chip forms in demanding materials, lowering the chance of long, stringy chips and helping to maintain process reliability. Is the insert suitable for interrupted cutting and roughing? Yes, the rhombic 55° geometry combined with a negative 0° relief provides robustness for interrupted cuts and heavier machining tasks. Can this insert be used in standard DNMG tool holders? The geometry and ISO designation align with DNMG tooling standards, making the insert compatible with holders specified for this designation. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes and do not indicate any affiliation with our company. The offered article is an original, factory-new product of the manufacturer.
DNMG150608-RP5 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, the WKK20S grade tuned for abrasive cast iron machining, and a stable rhombic geometry to ensure consistent chip control and longer tool life; order genuine Walter Tools inserts directly via Metav Werkzeuge or consult our specialists for application-specific advice. DNMG150608‑RP5 WKK20S indexable turning insert, Tiger‑tec Silver — Walter Tools DNMG150608‑RP5 WKK20S is a rhombic 55° indexable turning insert engineered for productive turning of cast iron components in industrial machining. Tiger‑tec Silver coating for extended tool life Grade WKK20S optimised for cast iron machining Rhombic 55° form with 0.8 mm nose radius Negative 0° rake for stable cutting forces Consistent performance for cast iron turning The combination of the WKK20S grade and Tiger‑tec Silver coating addresses the typical challenges of cast iron — high abrasive wear and frequent, short-breaking chips. The insert’s RP5 chipbreaker is designed to condition chips reliably, improving evacuation and reducing the risk of interruptions. The rhombic 55° geometry with a 0.8 mm corner radius delivers a durable edge that balances strength and surface finish, while the negative 0° clearance contributes to stable cutting forces. These technical choices translate into fewer tool changes and more predictable production runs when machining abrasive grey and nodular cast irons. Improved process reliability and higher productivity As a coated carbide grade intended for cast iron applications, this insert provides wear resistance that supports longer cutting lengths and steady performance under industrial cycle times. The RP5 chip control works with the insert geometry to moderate chip formation, which often leads to reduced downtime for chip management and quicker cycle completion. Walter Tools’ design focus on robust edge preparation means the insert sustains a repeatable cutting edge under interrupted cuts and heavier depths of cut, delivering measurable gains in operational efficiency for turning centres and lathes handling cast components. Application guidance and mounting considerations For clamping and toolholder selection, choose a DNMG‑compatible turning holder that matches the insert’s rhombic 55° seat. The plate thickness designation (06) and form require holders designed for DNMG‑type inserts to ensure correct seating and repeatable indexability. This insert is specifically optimised for cast iron materials (ISO group K); it is not specified for stainless or general steel grades, so selection should follow the workpiece material. Appropriate coolant strategy and feed selection, matched to the chipbreaker and grade, will further extend service life and maintain surface integrity on finished components. Contact Metav Werkzeuge today for tailored application advice on Walter Tools Tiger‑tec Silver turning inserts or to order genuine DNMG150608‑RP5 WKK20S inserts via Metav Werkzeuge. Technical data SKU: DNMG150608‑RP5‑WKK20S‑WALTER Product: Drehwendeschneidplatte (indexable turning insert) Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKK20S ISO designation: DNMG150608‑RP5 WKK20S Facts Plate form: Rhombus 55° Corner radius: 0.8 mm Plate size: 15 Plate thickness: 06 Clearance angle: 0° (negative) Special features Chipbreaker: RP5 Coating technology: Tiger·tec Silver (coated carbide) Material application: cast iron (ISO group K) Execution code: G Tolerance class: M FAQ What materials is this insert suited for? The DNMG150608‑RP5 WKK20S insert from Walter Tools is formulated for cast iron machining (ISO group K) and is optimised to handle the abrasive wear characteristics of such materials. What does the RP5 chipbreaker do? The RP5 chipbreaker on this Walter Tools insert shapes and controls cast iron chips to promote consistent breakage and evacuation, reducing chip-related interruptions during turning operations. How does the Tiger‑tec Silver coating benefit machining? Tiger‑tec Silver coating enhances the wear resistance of the Walter Tools grade WKK20S, extending cutting edge life and supporting stable performance in abrasive cast iron applications. Is this insert suitable for stainless steel or hardened materials? This specific grade and geometry are specified for cast iron; it is not indicated for stainless steel or hardened steel applications, so alternative grades should be selected for those materials. What clamping system is required for this insert? The DNMG form requires a compatible DNMG turning holder that secures rhombic 55° inserts to ensure correct seating and reliable indexability. Walter Tools: The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is original, factory‑new merchandise of the manufacturer.
DNMG150608-RP5 WPP05G WPP05G Wendeplatten - Walter Tools
High-performance turning is achieved through the combination of Tiger·tec Gold coating for extended tool life and the RP5 chipbreaker for predictable chip formation; the insert’s rhombic 55° geometry and 0.8 mm corner radius provide a robust cutting edge for Stahl machining. Order the DNMG150608-RP5 WPP05G indexable turning insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150608-RP5 WPP05G indexable turning insert — Tiger·tec Gold, RP5 | Walter Tools The DNMG150608-RP5 WPP05G is an indexable turning insert engineered for general turning of Stahl, offering a coated carbide grade within the Tiger·tec Gold family for productive, reliable machining. Tiger·tec Gold coated carbide for long tool life RP5 chipbreaker for controlled chip formation Rhombic 55° geometry for versatile turning 0° negative clearance with 0.8 mm corner radius Consistent productivity through advanced coating and chip control The combination of the Tiger·tec Gold coating and the WPP05G coated carbide substrate is focused on delivering longer tool life and stable cutting under typical turning conditions for Stahl. The RP5 chipbreaker is designed to generate short, controllable chips in a wide range of turning feeds, which reduces interruptions and tool changes. For production environments where process stability matters, this insert supports higher material removal rates without sacrificing repeatability, and predictable wear behaviour helps to plan tool changes more efficiently. Geometry engineered for edge strength and surface quality The rhombic 55° form, with a corner radius of 0.8 mm, provides a favourable compromise between edge strength and surface finish for external and light internal turning operations. The 0° (negative) clearance angle contributes to a stable insert seat and low tendency for chatter when used in appropriate toolholders, while the plate thickness code 06 ensures a solid support area beneath the cutting edge. Together, these geometry choices reduce the risk of edge breakage and help to maintain consistent component tolerances. Purpose-built for Stahl: material-oriented performance Classified for the machining group P, the grade WPP05G is tuned to the thermal and chip-formation characteristics typical of unalloyed and alloyed Stahl. The coated carbide structure is balanced to offer a mix of wear resistance and toughness, making the insert suitable for a broad workpiece spectrum within the Stahl group. For operations where mixed batches of Stahl are processed, the insert’s versatility reduces the need for frequent grade swaps and supports a smoother production flow. Easy integration and practical selection support The DNMG form factor and the ISO-style designation make the insert compatible with a wide range of standard turning toolholders, ensuring straightforward replacement and repeatable positioning. When tool selection requires matching chip control or specific corner radii, the RP5 chipbreaker and the 0.8 mm corner radius offer clear criteria for choosing this insert over more delicate grades. For further assistance in matching tolerances or selecting cutting parameters, Metav Werkzeuge can provide application advice and technical data. For application advice or tailored recommendations on Walter Tools inserts such as the DNMG150608-RP5 WPP05G, contact Metav Werkzeuge for technical consultation and supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DNMG150608-RP5-WPP05G-WALTER Designation: DNMG150608-RP5 WPP05G Manufacturer: Walter Tools Product type: Indexable turning insert (Drehwendeschneidplatte) Series: Tiger·tec Gold Grade: WPP05G Execution: G Tolerance class: M Core data Plate size: 15 Thickness code: 06 Corner radius: 0.8 mm Shape: Rhombus 55° Clearance angle: 0° (negative) Chipbreaker: RP5 Special features Coating/technology: Tiger·tec Gold Substrate: coated carbide Material application: Stahl ISO designation: DNMG150608-RP5 WPP05G Application group: P FAQ What materials is this insert suitable for? The DNMG150608-RP5 WPP05G is specified for the machining group P, meaning it is suitable for a range of Stahl grades including unalloyed and alloyed Stahl. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on this Walter Tools insert promotes controlled, short chips and consistent chip evacuation, which improves cycle reliability for continuous turning operations. Is the rhombic 55° form suitable for finishing? Yes; the rhombic 55° geometry with a 0.8 mm corner radius offers a balance of edge strength and surface quality, making it appropriate for many finishing and semi-finishing tasks on Stahl. Can the DNMG150608-RP5 WPP05G be used in standard holders? The ISO DNMG designation indicates compatibility with standard turning toolholders designed for DNMG inserts, enabling simple indexability and repeatable seating. What performance benefit does Tiger·tec Gold provide? Tiger·tec Gold coating on the WPP05G grade enhances wear resistance and thermal stability during turning, which supports longer tool life and more consistent component quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the named brands. The item offered is an original, factory-new product of the manufacturer.
DNMG150608-RP5 WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, the wear‑resistant WPP10G grade and the RP5 chipbreaker for efficient, repeatable steel machining. Order the DNMG150608-RP5 WPP10G directly via Metav Werkzeuge or consult our specialists for application advice. DNMG150608-RP5 WPP10G – Turning insert for steel machining, Tiger‑tec Gold, RP5 by Walter Tools The DNMG150608-RP5 WPP10G is a rhombic 55° turning insert engineered for reliable steel cutting, combining a coated carbide grade with a dedicated chipbreaker for steady production performance. Tiger‑tec Gold coated grade WPP10G RP5 chipbreaker for reliable chip control Rhombic 55° form for versatile turning 0° negative rake with 0.8 mm corner radius Consistent edge life for productive steel turning The Tiger‑tec Gold technology paired with the WPP10G grade provides a coated carbide substrate optimised for the thermal and mechanical demands of steel machining. This results in improved wear resistance and a stable cutting edge, which supports longer tool life and fewer interruptions in serial production. The RP5 chipbreaker enhances chip control, helping to maintain a uniform cutting process and reducing the risk of edge chipping under varying cutting parameters. For shops focused on throughput, this translates into measurable gains in uptime and process stability. Predictable chip formation and improved process security Designed with a Rhombus 55° geometry and a negative rake 0°, the insert encourages predictable chip flow and robust cutting performance in common turning operations. The 0.8 mm corner radius increases strength at the cutting edge, aiding resistance to mechanical shock during interrupted cuts. Such geometry is particularly suitable for finishing and medium‑duty roughing in steels where consistent chip evacuation and surface quality matter. Translating insert geometry into operational terms: better chip control reduces machine downtime and simplifies downstream handling of swarf. Easy specification and system integration for workshop planning With an inscribed circle of 15 mm and a thickness of 6 mm, this insert fits standard DNMG toolholders and can be integrated into existing turning tool systems without additional investment. The coated grade is specified for steel applications, which simplifies material selection and machining parameter setup for process engineers. Its tolerance class M offers consistent dimensional accuracy for indexable insert systems, helping to standardise tool inventories across cells and machines. For production planning, the combination of compatibility and predictable performance supports leaner stock management and fewer surprise tool changes. For steel turning operations that demand stable cutting performance, request availability and technical consultation from Metav Werkzeuge to leverage Walter Tools' Tiger‑tec Gold technology Technical Data Article number: DNMG150608-RP5-WPP10G-WALTER Label: Drehwendeschneidplatte DNMG150608-RP5 WPP10G Walter Tools Facts Inscribed circle: 15 mm Thickness: 6 mm Corner radius: 0.8 mm Relief angle: 0° (negative) Plate form: Rhombus 55° Special features Coating: Tiger‑tec Gold Grade: WPP10G (coated cemented carbide) Chipbreaker: RP5 Material suitability: steel (P) Series: Tiger‑tec Gold Tolerance class: M Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The DNMG150608-RP5 WPP10G is specified for machining steel (group P); the WPP10G grade and Tiger‑tec Gold coating are optimised for the thermal and chip‑forming characteristics of steels. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on this turning insert promotes controlled chip formation and evacuation, improving process security and reducing the likelihood of chip entanglement during turning operations. What does the Rhombus 55° form mean in practice? A Rhombus 55° insert offers versatile approach angles for external turning and finishing, allowing effective cutting geometry for a broad range of turning tasks while supporting stable tool engagement. Is the insert compatible with standard DNMG toolholders? Yes, the dimensions (15 mm inscribed circle, 6 mm thickness) correspond to standard DNMG toolholder interfaces, enabling straightforward integration into existing turning systems. Which benefit does the 0° negative rake provide? The negative rake 0° increases mechanical edge strength and helps maintain a robust cutting geometry under heavy or interrupted cuts, which is advantageous for many steel turning applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, brand‑new goods from the manufacturer.
DNMG150608-RP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of coated carbide performance and the Tiger·tec Gold technology to increase process stability and tool life in steel turning; order directly via Metav Werkzeuge or consult the technical team for application-specific parameter recommendations. DNMG150608-RP5 WPP20G – Turning indexable insert by Walter Tools (for steel) DNMG150608-RP5 WPP20G is a robust indexable turning insert designed for efficient steel machining, combining Tiger·tec Gold coating with an RP5 chipbreaker for reliable chip control. Tiger·tec Gold coated carbide grade WPP20G 0° negative rake for robust cutting Rhombic 55° shape for versatile turning 0.8 mm nose radius for consistent edge finish Optimised cutting for steel with predictable tool life The DNMG150608-RP5 WPP20G insert is engineered around the Tiger·tec Gold coating and the WPP20G carbide grade to address the thermal and mechanical demands of machining steel (ISO group P). The combination of a coated carbide substrate and the RP5 chipbreaker reduces built-up edge and improves chip control, which translates into longer effective cutting times and fewer interruptions for tool change. In practical terms, this results in higher process stability and a better cost-per-component ratio, especially during medium-duty turning operations where consistent edge behaviour is critical. Geometry that delivers surface quality and dimensional stability The insert’s Rhombic 55° form with a 0.8 mm nose radius and 0° negative rake provides a balance between strength and precision: the negative rake increases cutting edge robustness for tougher feeds, while the modest nose radius supports a consistent surface finish and predictable tool engagement. The geometry, together with tolerance class M, simplifies seating and repeatability in standard turning toolholders, so machining centres and conventional lathes alike benefit from reproducible results and reduced setup adjustments. Practical benefits for production and process planners Beyond metallurgical advantages, the grade WPP20G offers broad applicability across a range of steels due to its engineered toughness and wear resistance. The RP5 chipbreaker is tailored to produce manageable chips in typical turning parameters for steels, reducing the need for secondary chip-handling measures. This insert supports stable cutting conditions that help maintain cycle times and reduce unscheduled downtime. For process optimisation, Metav Werkzeuge’s technical advisers can assist with recommended speeds, feeds and coolant strategies, ensuring the insert’s properties are used to best effect in a given production environment. Contact Metav Werkzeuge for tailored machining recommendations on Walter Tools Tiger·tec Gold inserts; Metav’s specialists will advise on optimum insert grades, machining parameters and toolholder compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: DNMG150608-RP5-WPP20G-WALTER Article designation: DNMG150608-RP5 WPP20G Product: Turning indexable insert Manufacturer: Walter Tools Facts Size: 15 Thickness: 06 Nose radius: 0.8 Free angle: 0° (negativ) Tolerance class: M Special features Series: Tiger-tec Gold Carbide grade: WPP20G Chipbreaker: RP5 Shape: Rhombic 55° Coated carbide (beschichtetes Hartmetall) Suitable for: steel (ISO P) Application focus: turning / external machining FAQ What steels is this insert suitable for? The DNMG150608-RP5 WPP20G insert is formulated for the ISO P group (steel), making the Walter Tools grade suitable for unalloyed and alloyed steels with typical heat and chip formation during turning. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold on the WPP20G grade enhances wear resistance and heat management, which for this Walter Tools insert leads to improved edge life and more consistent cutting results when machining steel. Which chip control is expected with the RP5 breaker? The RP5 chipbreaker produces short, manageable chips in standard steel turning applications, reducing chip-related interruptions and improving process safety with the DNMG150608-RP5 insert. Is the insert suitable for finishing passes? With a 0.8 mm nose radius and the Rhombic 55° geometry, the insert provides a reliable surface finish while maintaining edge robustness; finishing is feasible within appropriate feeds and speeds for the material grade. Can the DNMG150608-RP5 be used in automated turning cells? Yes. The repeatable geometry, tolerance class M and the Tiger·tec Gold coating support consistent performance in automated and high-throughput turning cells when mounted in compatible toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150608-RP5 WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, the RP5 chipbreaker and the robust rhombic 55° geometry to keep turning processes productive and predictable; order the insert through Metav Werkzeuge or consult the team for application advice. DNMG150608-RP5 WPP30G turning insert for steel, Tiger·tec Gold, Walter Tools The DNMG150608-RP5 WPP30G is a rhombic indexable insert engineered for turning steel, offering Tiger·tec Gold wear resistance and RP5 chip control for stable machining performance Tiger·tec Gold coating for high wear resistance RP5 chipbreaker for consistent chip control Rhombic 55° shape for versatile turning tasks Suitable for machining steel (ISO P) Increased productivity through coated-grade durability The grade WPP30G, part of the Tiger·tec Gold series, combines a substrate and coating system optimised for the thermal and mechanical demands of machining steel (ISO P). This composition improves resistance to flank and crater wear and extends tool life under continuous operation. The result is fewer insert changes, reduced machine downtime and a more favourable cost-in-use ratio. By choosing a coated grade designed specifically for P-materials, shops benefit from consistent cutting performance across a wide range of unalloyed and alloyed steels. Geometry and chip control that stabilise cutting conditions The rhombic 55° outline and the RP5 chipbreaker provide controlled chip formation across common turning operations. A 0° negative rake delivers a robust cutting edge for interrupted cuts and heavy radial engagement, while the 0.8 mm corner radius helps distribute cutting forces to reduce edge chipping and improve component surface integrity. Together, these features support steady cutting forces and reliable chip evacuation, which simplifies parameter selection and enhances process reproducibility on the shop floor. Seamless integration and predictable performance in production Offered in the standard DNMG form with a size designation of 15 and thickness code 06, this indexable insert is compatible with established turning toolholders and changeover procedures. The RP5 chip control and the coated grade help maintain stable cutting temperatures and manageable wear patterns, aiding quality control and repeatability. For workshops seeking to increase throughput without sacrificing surface finish, the combination of geometry and coating technology supports both roughing and finishing steps with a single insert type. Choose the Walter Tools Tiger·tec Gold WPP30G DNMG150608-RP5 for robust, economical steel turning — contact Metav Werkzeuge for ordering or detailed application support at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DNMG150608-RP5-WPP30G-WALTER Designation: DNMG150608-RP5 WPP30G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Size designation: 15 Thickness code: 06 Corner radius: 0.8 mm Free angle: 0° (negative) Shape: Rhombus 55° Tolerance class: M Special features Chipbreaker: RP5 Grade: WPP30G (coated carbide) Intended application: Steel (ISO P) Substrate/coating technology: Tiger·tec Gold FAQ What materials is this insert suitable for? The DNMG150608-RP5 WPP30G insert is optimised for machining steel according to ISO P classifications and performs reliably across unalloyed and alloyed steels. How does the RP5 chipbreaker affect process stability? The RP5 chipbreaker promotes predictable chip formation and evacuation, which stabilises cutting forces and improves reproducibility when using the DNMG150608-RP5 WPP30G insert. Can the insert handle interrupted cuts or heavy cuts? Yes. The 0° negative rake and the 0.8 mm corner radius give the insert mechanical resilience suited to interrupted cuts and heavier radial engagement in turning operations. Is this insert compatible with standard DNMG toolholders? The DNMG150608-RP5 form follows the common DNMG geometry and can be used with standard DNMG-compatible turning holders, enabling straightforward integration into existing tooling systems. What are the primary benefits of the Tiger·tec Gold technology? Tiger·tec Gold coating provides enhanced wear resistance and thermal stability, extending tool life and maintaining edge integrity during prolonged steel machining tasks. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150612-FP5 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the WEP10C cermet grade combined with an FP5 chipbreaker and the precise rhombus 55° form for reliable chip control and consistent surface quality; order directly via Metav Werkzeuge or contact our consultants for tailored cutting parameters. DNMG150612-FP5 WEP10C — Turning indexable insert, Cermet grade, FP5 chipbreaker (Walter Tools) The DNMG150612-FP5 WEP10C is a cermet turning insert designed for precise industrial turning tasks where consistent edge stability and controlled chip formation are required. Cermet grade WEP10C for finishing performance FP5 chipbreaker for predictable chip control Rhombus 55° geometry for versatile turning Negative 0° relief for stable edge engagement Predictable chip control for smoother production The combination of a dedicated FP5 chipbreaker and a cermet cutting material delivers predictable chip formation that reduces the risk of entanglement and eases chip evacuation in medium- to high-precision turning operations. The chipbreaker geometry is engineered to influence breakage at common cutting depths, which supports reproducible cycle times and helps to protect workpiece surfaces. This results in fewer interruptions and a steadier production flow, particularly where consistent surface finish is part of the process requirement. Geometry and edge specification that improve accuracy A rhombus 55° insert shape provides a balance between accessibility and strength, allowing reliable approach angles for internal and external turning. The negative 0° relief enhances the cutting edge stability under radial load, while the corner radius 1.2 mm contributes to improved surface integrity on workpieces. Together these characteristics help to maintain machining accuracy across batch runs and reduce the need for secondary finishing, supporting higher first-pass yields and predictable tolerances. Durable Cermet grade for repeatable performance The WEP10C cermet grade is selected for a stable cutting edge and fine-grain wear behaviour, which is particularly suitable for applications focused on surface quality and dimensional repeatability. Cermet grades often excel in semi-finishing to finishing zones where a consistent edge and reduced built-up edge are advantageous. For optimal results, check the material suitability matrix and adjust speeds and feeds according to the specific workpiece material and machine rigidity to expand tool life and secure reproducible results. Practical guidance and compatibility in workshop environments The insert adheres to common DNMG sizing and mounting standards for quick indexing and economical use of all cutting edges. The DNMG150612-FP5 is supplied in the Walter Cermet series format and is compatible with toolholders designed for rhombic DNMG inserts. For customers uncertain about cutting data or material compatibility, a short trial under controlled conditions is recommended to verify machining parameters. Detailed cutting data adapted to the component material will support process reliability and minimise cycle-time variation. Contact Metav Werkzeuge for tailored cutting data, availability and sample quantities for the Walter Tools DNMG150612-FP5 WEP10C insert Technical Data Article number: DNMG150612-FP5-WEP10C-WALTER Designation: DNMG150612-FP5 WEP10C Manufacturer: Walter Tools Series: Walter Cermet Grade: WEP10C Facts Insert size: 15 Corner radius: 1.2 mm Thickness code: 06 Relief angle: 0° (negative) Tolerance class: M Special features FP5 chipbreaker Rhombus 55° insert form Cermet cutting material Execution: G WEP10C cermet grade for finishing applications FAQ What materials is this insert suited for? The WEP10C cermet grade performs well for finishing-focused applications; check the material matrix for the DNMG150612-FP5 WEP10C to confirm suitability for specific workpiece materials. How does the FP5 chipbreaker affect machining? The FP5 chipbreaker on the DNMG150612-FP5 promotes controlled chip formation, which helps to reduce interruptions and supports consistent surface quality during turning cycles. Can this insert be used in standard DNMG toolholders? Yes, the DNMG150612-FP5 WEP10C conforms to standard DNMG geometry and is compatible with toolholders designed for 55° rhombus inserts. What benefit does the 0° negative relief provide? A negative 0° relief increases edge stability under radial loads, improving dimensional repeatability and reducing the likelihood of edge chipping during robust turning cuts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanation only. There is no affiliation between our company and the cited brands. The offered article is an original, factory-new product of the manufacturer.
DNMG150612-FP5 WKP01G WKP01G Wendeplatten - Walter Tools
The Walter Tools Tiger‑tec Gold grade delivers durable, high‑performance turning for steel and cast iron thanks to its coated carbide substrate and FP5 chipbreaker; this combination improves process stability and extends tool life. Order the DNMG150612‑FP5 WKP01G directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. DNMG150612-FP5 WKP01G turning insert — Rhombic 55° geometry, Tiger‑tec Gold by Walter Tools The DNMG150612-FP5 WKP01G is a negative‑rake, rhombic 55° turning insert designed for reliable finishing and medium‑turning operations on steel and cast iron. Tiger‑tec Gold coated carbide for long tool life FP5 chipbreaker for controlled chip formation Rhombic 55° shape for versatile turning operations 1.2 mm corner radius for stable edge strength Consistent wear resistance for uninterrupted production The combination of Tiger‑tec Gold coating and a coated carbide substrate provides enhanced resistance to abrasive and adhesive wear, which translates into longer tool life and fewer tool changes. The coating technology stabilises the cutting edge under the heat and stresses typical when machining steel and cast iron, reducing flank wear and maintaining dimensional accuracy over longer production runs. For shops seeking predictable tool performance, this insert supports steady cycle times and lower per‑part tooling costs. Geometry engineered for strength and surface quality The rhombic 55° profile and a 0° negative rake create a robust cutting edge capable of handling interrupted cuts and varying depths of cut without chipping. The 1.2 mm corner radius increases edge support, improving resistance to mechanical shock and delivering a smoother workpiece finish. The FP5 chipbreaker aids in producing short, manageable chips on both ductile and brittle materials, simplifying chip evacuation and protecting the clamping system. These geometric features combine to give repeatable surface quality and reduced rework. Efficient chip control that reduces downtime Effective chip management is essential in productive turning operations. The integrated FP5 chipbreaker is tuned to break and direct chips reliably when machining the ISO groups P (steel) and K (cast iron), lowering the risk of entanglement and toolholder interference. Better chip control contributes to safer setups and less manual cleaning, which helps to keep machines running and operators productive. The insert’s tolerance class M supports consistent seating in standard toolholders, aiding repeatability across tool changeovers. Contact Metav Werkzeuge for tailored selection advice on Walter Tools Tiger‑tec Gold inserts or to arrange supply via info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: DNMG150612-FP5-WKP01G-WALTER Designation: DNMG150612-FP5 WKP01G Series: Tiger‑tec Gold Manufacturer: Walter Tools Facts Shape angle: Rhombus 55° Corner radius: 1.2 mm Thickness: 06 Free cutting angle: 0° (negative) Tolerance class: M Special features Coating technology: Tiger‑tec Gold Grade/sort: WKP01G (coated carbide) Chipbreaker type: FP5 Suitable for: steel (P) and cast iron (K) Intended use: turning / finishing and medium turning FAQ What materials is this insert suitable for? The DNMG150612‑FP5 WKP01G is formulated for ISO groups P (steel) and K (cast iron), with the Tiger‑tec Gold coating optimised for those material behaviours. How does the FP5 chipbreaker benefit production? The FP5 chipbreaker promotes short, controllable chips on both steel and cast iron, improving chip evacuation and reducing the likelihood of chip‑related interruptions. What advantages does the 0° negative rake provide? A 0° negative rake increases edge strength and resistance to impact, making the insert more robust for interrupted cuts and heavy feed conditions. Is the insert compatible with standard toolholders? Yes; the insert’s geometrical designation and tolerance class M correspond to common toolholder specifications for DNMG inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered item is an original, brand‑new product of the manufacturer.
DNMG150612-FP5 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the FP5 chipbreaker together with a 1.2 mm corner radius for reliable, repeatable steel machining; order the insert directly via Metav Werkzeuge or consult the team for application advice. DNMG150612-FP5 WPP10G – Turning indexable insert, Tiger‑tec Gold coating, for steel | Walter Tools The DNMG150612-FP5 WPP10G is a rhombic 55° indexable turning insert engineered for steel machining, featuring a Tiger‑tec Gold coated carbide grade with an FP5 chipbreaker for controlled chip formation. Tiger‑tec Gold coating for high wear resistance FP5 chipbreaker for consistent chip control Rhombic 55° shape for versatile turning operations 1.2 mm corner radius for stable edge life Durable coating and predictable tool life for productive turning The combination of the Tiger‑tec Gold coating and the WPP10G grade delivers high wear resistance and thermal stability during continuous turning of steel. The coated carbide substrate reduces flank and crater wear, which translates into longer tool life and fewer insert changes on the production line. For operations where cycle time and process stability are critical, this insert supports consistent performance under the thermal loads typical for machining group P (steel) materials, contributing to higher uptime and predictable maintenance intervals. Stable chip control and surface quality with optimised geometry Designed with an FP5 chipbreaker and a rhombic 55° geometry, the insert provides reliable chip formation across a range of feed rates. The chipbreaker geometry promotes short, controllable chips for interrupted and continuous cuts, while the 1.2 mm corner radius balances edge strength and achievable surface finish. The negative 0° rake keeps the cutting edge robust for moderate to heavy depths of cut, enabling stable cuts and a repeatable surface finish without frequent tool adjustments. Practical application advice for steel turning and tool selection For steel-focused turning tasks the insert is designated for material group P and is best used in toolholders compatible with the DNMG150612 form factor. The insert’s tolerance class M ensures interchangeability and repeatability in automated setups. When selecting cutting data, prioritise the coating and chipbreaker: the Tiger‑tec Gold technology supports higher cutting speeds and improved tool life, while the FP5 geometry reduces the need for secondary chip-management measures. For fine finishing, reduce feed to take advantage of the smaller corner radius; for roughing, the robust negative rake and chip control allow for deeper cuts with lower risk of edge chipping. Discuss cutting-parameter recommendations and order DNMG150612-FP5 WPP10G inserts directly through Metav Werkzeuge for tailored process optimisation Technical data SKU: DNMG150612-FP5-WPP10G-WALTER Designation: DNMG150612-FP5 WPP10G Product type: Turning indexable insert Brand: Walter Tools Series: Tiger‑tec Gold Grade: WPP10G Chipbreaker: FP5 Shape: Rhombus 55° Rake angle: 0° (negative) Numbers / Core technical data Corner radius: 1.2 mm Inscribed circle: 15 mm Thickness designation: 06 Tolerance class: M Special features / Materials Coating: Tiger‑tec Gold (coated carbide) Suitable for: Steel (P) according to ISO group designation Intended application: Turning operations Geometry benefit: Optimised chip control and edge strength FAQ Which materials is this insert suitable for? The DNMG150612-FP5 WPP10G is specified for machining steel (ISO group P); the WPP10G grade and Tiger‑tec Gold coating are tuned for typical steel heat and chip-formation behaviour. What advantages does the FP5 chipbreaker offer? The FP5 chipbreaker on this turning insert promotes short, manageable chips and reliable evacuation, improving process stability and reducing the need for additional chip-control devices. How does the rhombic 55° geometry affect operation choice? Rhombic 55° geometry provides versatility for general turning, allowing efficient profiling and facing while offering the option to index the insert for continued use when one corner is worn. What does the Tiger‑tec Gold coating contribute to performance? Tiger‑tec Gold coating on the Walter grade enhances thermal resistance and wear behaviour, enabling extended tool life and the possibility to run at more productive cutting speeds in steel. Can the insert be used in standard DNMG toolholders? Yes, the insert corresponds to the DNMG150612 designation and fits toolholders designed for that insert family; ensure the holder is compatible with the 55° rhombic form and thickness designation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150612-FP5 WPP20G Wendeplatten - Walter Tools
High wear resistance and broad material coverage are delivered by the Tiger·tec Gold grade and the WPP20G coating, while the FP5 chipbreaker and rhombic 55° geometry with a 1.2 mm corner radius contribute to stable, repeatable turning of steel. Benefit from consistent surface quality and extended tool life; order the insert directly via Metav Werkzeuge or request application advice from their consultants. DNMG150612-FP5 WPP20G Turning insert — Tiger·tec Gold, for steel — Walter Tools The DNMG150612-FP5 WPP20G is a rhombic 55° turning insert with Tiger·tec Gold coated carbide, engineered for efficient finishing and medium turning operations in steel. Tiger·tec Gold coated carbide for steel Rhombic 55° geometry with 1.2 mm radius Negative 0° rake for stable cutting action Reliable cutting performance for steel turning The Tiger·tec Gold grade WPP20G combines a coated carbide substrate with a high-performance surface layer that enhances wear resistance and thermal stability during machining of steel (ISO P group). This technological pairing reduces flank wear under typical turning conditions and maintains cutting-edge integrity over longer tool life. The result is predictable component quality and fewer insert changes, which supports higher machine uptime and lower process costs. The FP5 chipbreaker contributes to controlled chip formation, particularly during continuous and semi-continuous cuts. Geometry and chip control for consistent surface finish The rhombic 55° geometry together with a 1.2 mm corner radius provides a balance between edge strength and the ability to achieve fine surface finishes in finishing or light medium-depth turning. The negative 0° rake promotes a robust cutting edge and reduces the tendency for edge chipping in interrupted cuts or unstable set-ups. The FP5 chipbreaker is designed to break and guide chips reliably in steel turning, improving evacuation and reducing the risk of recutting. Tolerance class M supports interchangeability and consistent insert seating, which simplifies toolholder setup and repeatable dimensional control. Productivity gains and process security in series production Using a coated, application-oriented grade such as WPP20G yields tangible process advantages: predictable wear progression, reduced rework, and stable cycle times in serial production. The insert design supports a wide range of turning tasks on steel components, enabling flexible operation from light finishing to general turning. Because the tool is developed for the thermal and mechanical conditions typical of steel machining, it helps maintain surface quality and dimensional stability across production runs, fostering higher overall productivity and lower unit costs. Contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for availability and technical consultation on the DNMG150612-FP5 WPP20G Tiger·tec Gold turning insert. Technical Data Article number: DNMG150612-FP5-WPP20G-WALTER Designation: DNMG150612-FP5 WPP20G Product type: Turning insert Brand: Walter Tools Series: Tiger·tec Gold Facts Geometry: Rhombic 55° Corner radius: 1.2 mm Rake angle: 0° (negative) Thickness code: 06 Size: 15 Tolerance class: M Chipbreaker: FP5 Special features Coating/grade: WPP20G (coated carbide) Material application: Steel (P group, ISO 513) Series technology: Tiger·tec Gold Stable cutting action for general turning Designed for predictable wear and good surface quality FAQ Which materials is this insert suited for? The DNMG150612-FP5 WPP20G is intended primarily for steel (ISO P group); the WPP20G grade is optimised for the thermal and chip-forming behaviour of steel. What does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WPP20G grade increases wear resistance and thermal stability, which helps the DNMG150612-FP5 maintain edge life and process security during extended turning cycles. How does the FP5 chipbreaker influence machining? The FP5 chipbreaker on this insert promotes controlled chip formation and evacuation in steel turning, supporting consistent surface finish and reduced risk of chip-related interruptions. Is the insert suitable for interrupted cuts? Yes; the rhombic 55° form and negative 0° rake give the DNMG150612-FP5 WPP20G a robust cutting edge that tolerates interruptions better than more fragile positive-rake geometries. What does tolerance class M mean for toolholders? Tolerance class M indicates standard manufacturing accuracy for the insert seat and dimensions, helping ensure repeatable seating and interchangeability across compatible toolholders. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
DNMG150612-MK5 WKK10S Wendeplatten - Walter Tools
Benefit from a combination of reliable performance on cast iron, the Tiger·tec Silver coated carbide grade for extended wear resistance, and a robust MK5 chipbreaker for consistent chip control; order the DNMG150612-MK5 WKK10S insert directly via Metav Werkzeuge or consult our specialists for cutting-data advice. DNMG150612-MK5 WKK10S — Indexable turning insert DNMG150612-MK5, WKK10S for cast-iron machining (Walter Tools) The DNMG150612-MK5 WKK10S is a rhombic 55° indexable turning insert engineered for efficient, reproducible machining of cast iron, combining a coated carbide grade and a dedicated chipbreaker for industrial turning operations Tiger·tec Silver coating for enhanced wear resistance Optimised MK5 chipbreaker for controlled chip formation 55° rhombic form with 1.2 mm corner radius for versatility Specifically designed for cast iron machining applications Proven process stability when machining cast iron The rhombic insert combined with the WKK10S grade from the Tiger·tec Silver family delivers consistent cutting performance when working with abrasive cast-iron materials. The coated carbide composition is optimised to resist abrasive wear typical of grey and nodular cast irons; as a result, the tool provides longer service life and reduced regrind intervals. This stability translates into fewer tool changes and less downtime, supporting continuous production cycles in turning operations. Geometry and chip control that support productivity With a 55° rhombic profile and a 1.2 mm corner radius, the insert offers a reliable balance between edge strength and accessibility in different turning setups. The MK5 chipbreaker is designed to produce short, controlled chips when cutting cast iron, which simplifies chip evacuation and reduces the risk of workpiece damage. The negative rake configuration (0°) contributes to robust cutting-edge support and predictable tool behaviour under interrupted cuts or heavy feeds. Coating technology explained for better tool life The Tiger·tec Silver coating is a multilayer treatment applied to the base carbide to enhance resistance against abrasive wear and thermal load. For machining cast iron — which tends to generate short, brittle chips and abrasive contact at the edge — this coating helps preserve the cutting edge and maintain surface quality over longer tool life. For users unfamiliar with coating terminology: coated carbide means a hard, wear-resistant layer bonded to a carbide substrate, combining toughness and surface protection for demanding turning tasks. Application advantages and integration into production This indexable insert is particularly suited to standard and semi-finishing turning of cast-iron components where repeatable results and process reliability are priorities. The geometry and grade allow a practical compromise between productivity and surface integrity, making the insert a good match for batch production and automated turning lines. Integration is straightforward on toolholders that accept DNMG-style inserts; toolrooms gain a predictable tool performance profile and easier planning of tool-change intervals, which supports efficient shop-floor scheduling. Contact Metav Werkzeuge for tailored cutting data, availability of Walter Tools inserts and expert recommendations on machining parameters to suit specific cast-iron grades Technical data Article number: DNMG150612-MK5-WKK10S-WALTER Designation: DNMG150612-MK5 WKK10S Manufacturer: Walter Tools Series: Tiger-tec Silver Facts Size: 15 Thickness: 06 Corner radius: 1,2 Free angle: 0° (negativ) Plate form: Rhombus 55° Tolerance class: M Special features Grade: WKK10S Chipbreaker: MK5 Base material: coated carbide Suitable for: cast iron (K) Execution: G Plate designation without grade: DNMG150612-MK5 FAQ What materials is this insert suitable for? The DNMG150612-MK5 WKK10S insert is designed primarily for cast iron machining; the WKK10S grade and Tiger·tec Silver coating are optimised for abrasive cast-iron wear conditions. How does the MK5 chipbreaker influence machining? The MK5 chipbreaker produces short, controlled chips when turning cast iron, improving chip evacuation and reducing the risk of surface marks or entanglement in automated setups. What does the 1.2 mm corner radius mean for surface finish? A 1.2 mm corner radius increases edge strength and typically supports better surface finish at moderate feeds, while also enhancing resistance to edge chipping in interrupted cuts. How can the grade and series be identified on the insert? Identification is via the ISO designation and grade marking: the insert is marked as DNMG150612-MK5 WKK10S, belonging to the Tiger·tec Silver series from Walter Tools. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanation. There is no connection between our company and the brands cited. The offered article is original, factory-new goods from the manufacturer.
DNMG150612-MK5 WKK20S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Silver coating, the MK5 chipbreaker and the rhombic 55° geometry for efficient, repeatable machining of cast iron; the insert offers stable edge life and controlled chip behaviour. Order the DNMG150612-MK5 WKK20S directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. DNMG150612-MK5 WKK20S indexable turning insert — Tiger‑tec Silver for cast iron (Walter Tools) A DNMG150612-MK5 WKK20S indexable turning insert engineered for productive machining of cast iron, combining a coated carbide grade with a MK5 chipbreaker and a 55° rhombic form Tiger‑tec Silver coating for wear resistance MK5 chipbreaker for short, controlled chips Rhombic 55° geometry for versatile turning 1.2 mm corner radius for stable cutting edge High productivity through tailored grade and coating The combination of the Tiger‑tec Silver coating and the WKK20S grade delivers a balance between wear resistance and toughness that is particularly suited to the abrasive nature of cast iron (ISO group K). Because the grade is a coated carbide, the insert resists abrasive wear while maintaining a stable cutting edge under typical interrupted cuts and hard inclusions found in grey and nodular castings. This results in longer tool life and fewer indexings, supporting continuous production and reducing tool-change downtime. Controlled chip formation and secure edge support The MK5 chipbreaker is designed for producing short, breaking chips when turning brittle materials; this creates predictable chip flow and reduces the risk of chip entanglement. Combined with the 1.2 mm corner radius and the 0° negative relief, the geometry provides robust edge support for heavy cuts and repeated use. The result is improved process security during medium- to heavy-duty operations, with consistent workpiece surface quality and fewer scrap parts. Geometry and versatility for machining strategies The rhombic 55° insert form offers versatility across common turning tasks: it permits effective approach angles for both roughing and semi-finishing operations while enabling economical use of the insert across several toolholders. The shape and tolerance class M support dimensional consistency, and the thickness and size coding enable straightforward tool selection within standard DNMG configurations. This makes the grade a practical choice for batch production and fluctuating workpiece mixes. Practical application guidance and machine compatibility As a coated indexable insert for cast-iron applications, the component suits lathes and automatic turning centres where chip control and tool life are priorities. The coated carbide construction is compatible with conventional coolant strategies; however, machining parameters must be selected according to the workpiece grade and machine rigidity to maximise the benefits of the Tiger‑tec Silver technology. Integration into existing tooling systems is straightforward thanks to the widely used DNMG format and the MK5 chipbreaker variant. Contact Metav Werkzeuge for tailored cutting data and order information for this Walter Tools indexable insert, DNMG150612-MK5 WKK20S, to ensure optimal setup for production environments Technical data Article number: DNMG150612-MK5-WKK20S-WALTER Product: Drehwendeschneidplatte Brand: Walter Tools Grade: WKK20S Series: Tiger‑tec Silver Core measurements Insert size: 15 Thickness code: 06 Corner radius: 1.2 mm Relief angle: 0° (negative) Geometry: Rhombic 55° Materials & features Coating: Tiger‑tec Silver (coated carbide) Chipbreaker: MK5 Tolerance class: M Application: Cast iron (ISO group K) FAQ What materials is this insert intended for? The DNMG150612-MK5 WKK20S is specified for cast iron (ISO group K) and its WKK20S grade is tuned to resist abrasive wear typical of such materials. How does the MK5 chipbreaker affect chip control? The MK5 chipbreaker generates short, broken chips with brittle materials, improving chip evacuation and reducing interference with the machining process when using the Walter Tools insert. Is the coated grade suitable for interrupted cuts and hard inclusions? Yes, the Tiger‑tec Silver coating combined with the WKK20S grade provides enhanced edge life and toughness, which helps to maintain performance under interrupted cutting conditions. Can this insert be used for both roughing and finishing operations? The rhombic 55° geometry and the 1.2 mm corner radius allow flexible use across roughing and semi-finishing tasks, offering a good compromise between stability and surface quality. What does the 0° negative relief mean for cutting performance? A 0° negative relief increases edge strength and supports heavier feed and depth-of-cut settings, leading to greater process security when machining challenging cast-iron components. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (marketed as Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
DNMG150612-MM5 WMP20G WMP20G Wendeplatten - Walter Tools
Benefit from a combination of consistent chip control, high wear resistance and a geometry engineered for robust turning in stainless steel. Order the DNMG150612‑MM5 WMP20G directly via Metav Werkzeuge or ask our consultants if needed. DNMG150612‑MM5 WMP20G indexable turning insert — Tiger‑tec Gold, for stainless steels | Walter Tools The DNMG150612‑MM5 WMP20G is an indexable turning insert engineered for secure chip formation and reliable cutting performance in stainless steel turning operations. Tiger‑tec Gold coating for high wear resistance Optimised MM5 chipbreaker for secure chip control 0° negative rake for robust turning operations Rhombic 55° form with 1.2 mm corner radius Reduced downtime through stable cutting edge and coating The Tiger‑tec Gold grade WMP20G uses a coated carbide substrate to deliver extended tool life and consistent wear behaviour when machining stainless steels. The modern coating system improves thermal stability and reduces adhesion tendencies that typically cause build‑up on the cutting edge; this results in fewer interruptions for tool change and rework. Engineers and production planners will value the predictability of tool wear, which supports tighter process windows and a more efficient tool management strategy. Predictable chip control and secure turning geometry Equipped with the MM5 chipbreaker and a 0° negative rake, the insert promotes short, breakable chips and a secure cutting action in demanding material classes. The rhombic 55° shape combined with a 1.2 mm corner radius balances edge strength with a favourable cutting load distribution, reducing the risk of edge chipping under intermittent cuts. For workshops processing ferritic or austenitic stainless alloys, this geometry aids stable surface finish and repeatable results on serial production runs. Practical benefits for process reliability and productivity Integrating this insert into standard holders is straightforward and supports sustained productivity. The grade’s tendency to generate predictable chips reduces machine stoppages caused by entangled swarf, while the coated surface lowers friction and heat at the cutting interface. In sum, the combination of geometry and grade contributes to improved process security, less scrap, and a higher throughput — relevant advantages for job shops and production lines working with corrosion‑resistant steels. For reliable stainless steel turning with Tiger‑tec Gold, contact Metav Werkzeuge for availability and expert advice via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data SKU: DNMG150612-MM5-WMP20G-WALTER Product: Drehwendeschneidplatte DNMG150612‑MM5 WMP20G Manufacturer: Walter Tools Series: Tiger‑tec Gold Core specifications Rake angle: 0° (negative) Corner radius: 1.2 mm Insert form: Rhombus 55° Insert size: 15 Thickness: 06 Materials & features Grade: WMP20G (coated carbide) Chipbreaker: MM5 Application group: M (stainless steels) Tolerance class: M FAQ What materials is this insert designed for? The WMP20G grade is formulated for machining stainless steels; the DNMG150612‑MM5 insert is intended specifically for applications in the ISO M material group. How does the MM5 chipbreaker help in production? The MM5 chipbreaker on this insert promotes short, controllable chips, which reduces the risk of swarf entanglement and improves uptime during turning operations. Is the 0° negative rake suitable for interrupted cuts? Yes, the 0° negative rake increases edge strength and makes the insert more tolerant of interrupted cuts and variable loads common in stainless steel turning. Can the insert provide consistent surface finish? Combined edge geometry and the Tiger‑tec Gold coating support a stable cutting edge and controlled heat generation, which contributes to repeatable surface quality in serial production. Which series does the grade belong to and what does it mean? The insert belongs to the Tiger‑tec Gold series; this denotes a coated carbide technology designed for improved wear resistance and thermal stability when machining tougher materials like stainless steels. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150612-MM5 WMP20S WMP20S Wendeplatten - Walter Tools
Benefit from a cost-effective combination of durable coated carbide and reliable chip control for stable stainless steel turning. The insert’s geometry and Tiger‑tec Silver grade ensure consistent surface quality and extended edge life, supporting continuous production; order via Metav Werkzeuge or request concise advice from our consultants. DNMG150612-MM5 WMP20S Indexable Turning Insert — for Stainless Steel | Walter Tools A DNMG150612-MM5 WMP20S indexable turning insert engineered for reliable, medium-to-robust machining of stainless steels in general turning applications Tiger‑tec Silver coating for stainless steel machining Stable cutting edge with MM5 chipbreaker Rhombic 55° geometry for versatile turning 0° negative rake and 1.2 mm corner radius Increase throughput with a high-performance grade The combination of the Tiger‑tec Silver series and the WMP20S grade provides a coated carbide solution tailored to the challenges of machining stainless steel. The coating technology promotes secure chip formation and a robust cutting edge, which translates into higher cutting speeds and longer intervals between indexings. For production planners and shop floor managers this means fewer tool changes, more predictable cycle times and improved component consistency under medium to heavy cutting conditions. Geometry that balances versatility and surface integrity A rhombic 55° insert form with 0° negative rake delivers a versatile cutting geometry suitable for a wide range of turning tasks. The 1.2 mm corner radius supports moderate stock removal while protecting the edge from thermal and mechanical loading, helping to maintain surface finish and dimensional stability. This geometry is particularly useful where both roughing and semi-finishing passes are required with the same insert type, reducing tool inventory and set‑up complexity. Effective chip control and process reliability Equipped with the MM5 chipbreaker, this insert is designed to manage the chip behaviour typical of the ISO M group. Stable chips and controlled evacuation reduce the risk of chip re-cutting and built-up edge formation, improving reproducibility across serial production. The indexable insert format simplifies reconditioning strategies: predictable wear patterns enable more efficient tool-change scheduling and downstream process planning, supporting continuous, traceable manufacturing performance. Practical guidance for integration and cost efficiency When implemented in a matched clamping system and paired with suitable cutting data for stainless steel, the grade delivers notable life and consistent results. Operators benefit from the insert’s resistance to edge degradation in sticky, heat‑prone materials, which lowers total tooling costs per part over time. For specific feed and speed recommendations or compatibility with particular toolholders, consult Metav Werkzeuge’s technical team for application‑specific data and optimisation tips. Contact Metav Werkzeuge today to discuss Walter Tools inserts and receive tailored cutting data and procurement advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: DNMG150612-MM5-WMP20S-WALTER Label: Drehwendeschneidplatte DNMG150612-MM5 WMP20S Walter Tools Manufacturer: Walter Tools Product type: indexable turning insert ISO designation: DNMG150612-MM5 WMP20S Core data Insert size: 15 Thickness: 06 Corner radius: 1.2 mm Relief angle: 0° (negative) Chipbreaker: MM5 Special features Series: Tiger‑tec Silver Grade: WMP20S (coated carbide) Suitable for: stainless steel (ISO M) Geometry: rhombic 55° Application: medium to robust turning conditions FAQ What materials is this insert best suited for? The DNMG150612-MM5 WMP20S grade is optimised for stainless steel (ISO M); the Tiger‑tec Silver coating and MM5 chipbreaker support secure chip formation and edge stability in these materials. How does the MM5 chipbreaker influence performance? The MM5 chipbreaker promotes predictable chip shapes and evacuation, reducing the likelihood of built‑up edge and re‑cutting, which helps to maintain surface quality and tool life during serial turning operations. Can this insert be used for both roughing and finishing? Yes, the rhombic 55° geometry with a 1.2 mm corner radius provides a balance between strength and finish capability, making the insert suitable for combined roughing and semi‑finishing tasks in many setups. Where to obtain cutting data and tooling recommendations? Metav Werkzeuge can supply application‑specific cutting parameters and holder compatibility advice for the DNMG150612-MM5 WMP20S insert to help optimise process reliability and part quality. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used solely for explanation and to indicate compatibility; there is no affiliation between Metav Werkzeuge and the trademark holders. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
DNMG150612-MM5 WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a stable cutting edge and the MM5 chipbreaker for reliable machining of stainless steel and heat‑resistant alloys; order directly via Metav Werkzeuge or consult our specialists for application advice. DNMG150612-MM5 WSM10S turning insert — Tiger·tec Silver, for stainless steel & superalloys (Walter Tools) The DNMG150612-MM5 WSM10S is a negative‑relief, rhombic 55° indexable insert designed for turning applications where secure chip control and edge stability are required. Tiger·tec Silver coated carbide Robust cutting edge and stable chip control Suitable for stainless steel and superalloys Rhombic 55° form with 1.2 mm corner radius Higher process reliability through optimised coating and grade The combination of the Tiger·tec Silver coating and the WSM10S grade provides improved thermal resistance and wear behaviour during continuous turning operations. For applications in the ISO M and S groups, this coating technology supports stable chip formation and reduces the tendency for edge build‑up, which leads to more predictable tool life and fewer interruptions in production. The result is a more consistent surface finish and reduced tool changes. Geometry engineered to limit downtime and protect the toolholder The rhombic 55° geometry with a 1.2 mm corner radius and negative 0° relief reduces radial cutting forces and offers repeatable engagement in many holders. The MM5 chipbreaker is tuned for secure chip control in tough alloys, helping to avoid entangling chips and minimise rework. Together these features support efficient turning cycles and help maintain spindle and holder stability under demanding conditions. Clear application guidance for confident machining Intended primarily for machining stainless steel and heat‑resistant superalloys, this indexable insert suits operations where edge strength and thermal stability are decisive. The coated carbide construction favours higher cutting temperatures and provides a margin against adhesion and crater wear. When selecting cutting data, favour moderate to robust feeds and speeds aligned with machine rigidity and coolant strategy to exploit the insert’s strengths while preserving cutting edge integrity. Contact Metav Werkzeuge to specify the correct DNMG150612‑MM5 WSM10S insert for stainless steel and superalloy tasks or to receive tailored machining parameters from our specialists Technical data Article number: DNMG150612-MM5-WSM10S-WALTER Designation: DNMG150612-MM5 Series: Tiger·tec Silver Grade: WSM10S Manufacturer: Walter Tools Facts Insert size: 15 mm Corner radius: 1.2 mm Thickness: 6 mm Relief angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Silver (coated carbide) Chipbreaker: MM5 Geometry: Rhombic 55° Suitable material groups: M (stainless steel), S (superalloys / titanium) Execution: G FAQ What materials is this insert suited to machine? The DNMG150612‑MM5 WSM10S insert is specified for ISO groups M and S, i.e. primarily stainless steel and heat‑resistant superalloys or titanium‑based alloys. Which chipformer is integrated and what is its benefit? This insert uses the MM5 chipbreaker, designed to produce short, controllable chips in tough materials and thereby reduce the risk of chip jamming and improve process stability. How does the geometry influence part quality? The rhombic 55° form with a 1.2 mm corner radius supports consistent engagement and helps produce reliable surface finish while protecting the cutting edge from excessive stress. Is the insert compatible with standard DNMG toolholders? The DNMG150612‑MM5 WSM10S follows the DNMG ISO designation and is compatible with toolholders and clamping systems that accept DNMG inserts of matching size and seat geometry Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150612-MM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, MM5 chip control and a robust negative rake for dependable machining of stainless steels and high-temperature alloys; order the insert via Metav Werkzeuge or request technical advice from the consultants for process-specific recommendations. DNMG150612-MM5 WSM20S turning insert (indexable) — Tiger·tec Silver, negative 0° (Walter Tools) DNMG150612-MM5 WSM20S is an indexable turning insert designed for demanding machining of stainless steels and heat-resistant superalloys, combining a coated carbide grade with a stable chipbreaker geometry Tiger·tec Silver coated grade for heat resistance MM5 chipbreaker for controlled chip formation Rhombic 55° geometry for flexible tool engagement 1.2 mm corner radius for edge robustness Maximise metalcutting performance on tough alloys The coated carbide Tiger·tec Silver grade delivers a balance of thermal resistance and edge stability that directly improves process reliability when machining stainless steels and superalloys. The combination of the MM5 chipbreaker and the rhombic tool shape ensures repeatable chip formation and predictable cutting forces; this reduces the risk of built-up edge and unplanned stoppages. In practical terms, operators can expect more stable tool life and fewer interruptions in series production when replacing conventional grades with this indexable insert. The chipbreaker is engineered to break and evacuate chips efficiently at typical turning feed rates, which lowers the likelihood of surface damage and enhances cycle-time consistency. Geometry and mounting that support versatile turning operations The rhombic 55° outline and the negative 0° rake deliver a combination of entry stability and adaptability for different turning tasks. A 1.2 mm corner radius provides a robust cutting edge that copes well with interrupted cuts and higher radial engagement, while the tolerance class M signals suitability for precision turning in material group M. The insert’s denomination indicates its ISO-compatible form and grade, making it simple to integrate into established toolholders and parameter tables. For production engineers planning tool lists, this geometry allows flexible setup for both semi-finishing and heavier roughing steps without sacrificing edge life. Reliability, economy and process reproducibility Walter Tools’ carbide grade and coating technology are engineered to offer consistent results across batches, supporting high-volume machining with fewer tool changes. The insert’s construction — coated hardmetal with an optimised chipbreaker — reduces flank wear and maintains surface finish over longer tool life, improving overall productivity. The negative rake and sturdy edge provide mechanical strength at higher cutting forces, while the coating reduces thermal degradation during sustained cutting. For procurement and process planners, this translates into lower unit costs through extended insert life and fewer interruptions, while quality assurance benefits from more uniform part finish. For tailored advice on integrating the Walter Tools Tiger·tec Silver DNMG150612-MM5 WSM20S insert into specific machining processes, contact Metav Werkzeuge for a process consultation at info@metav-werkzeuge.com or +49 2822 7131930; the sales team can recommend optimal cutting parameters and holder combinations. Technical data SKU: DNMG150612-MM5-WSM20S-WALTER Item designation: DNMG150612-MM5 WSM20S Product type: indexable turning insert Series: Tiger·tec Silver Manufacturer: Walter Tools Grade / sort: WSM20S Chipbreaker: MM5 Facts Shape: Rhombic 55° Corner radius: 1.2 mm Size: 15 Thickness: 06 Rake angle: 0° (negative) Tolerance class: M Material code: S / M Special features Coating: coated carbide (Tiger·tec Silver) Applications: stainless steels and heat-resistant superalloys (ISO group M, S) Robust edge for interrupted cuts Designed for stable chip formation and repeatable tool life FAQ What materials is this insert suitable for? The DNMG150612-MM5 WSM20S insert is engineered for stainless steels and heat-resistant superalloys (ISO groups M and S) thanks to the Tiger·tec Silver coated carbide grade and MM5 chipbreaker. How does the MM5 chipbreaker benefit production? The MM5 chipbreaker on this Walter Tools insert shapes and segments chips for safe evacuation, reducing the risk of built-up edge and improving surface finish consistency during long production runs. What does the negative 0° rake mean for cutting forces? A negative 0° rake increases mechanical edge strength and is suited to higher radial engagement and interrupted cuts, resulting in improved resistance to chipping under heavy loads. Can this insert be used for finishing operations? Yes; the rhombic 55° geometry and a 1.2 mm corner radius offer a compromise between robustness and finish capability, allowing use in semi-finish and certain finishing passes depending on the setup. How is repeatability ensured between batches? The Tiger·tec Silver series and Walter Tools’ manufacturing processes provide consistent coating and carbide microstructure, which supports repeatable tool life and stable machining results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150612-MM5 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of the combination of a heat‑resistant, Tiger·tec Silver WSM30S grade and a stable Rhombic 55° geometry to secure consistent edge life and predictable chip control in demanding turning tasks; order or request application advice via Metav Werkzeuge for smooth integration into production. DNMG150612-MM5 WSM30S indexable turning insert – Tiger·tec Silver, Rhombic 55°, 1.2 mm corner radius (Walter Tools) A DNMG150612-MM5 WSM30S indexable turning insert designed for machining stainless steel and heat‑resistant superalloys with a coated carbide grade tuned for stable chip formation and reliable edge performance. Tiger·tec Silver coated carbide grade WSM30S Optimised for stainless steel and superalloys Rhombic 55° shape with 1.2 mm corner radius Negative 0° rake for stable cutting edges Improved results on challenging materials through a heat‑resistant grade The DNMG150612-MM5 WSM30S combines the Tiger·tec Silver coating with a polished coated carbide body to address the thermal and mechanical stresses typical of stainless steels and nickel‑based alloys. The WSM30S grade is tuned to support secure chip formation where material toughness and high heat generation are present. In practice, this means fewer unplanned interruptions from built‑up edge and a steadier surface finish when turning demanding components. Geometry that maintains edge stability and chip control A geometry optimised for process security ensures repeatable performance: the Rhombic 55° form and 1.2 mm corner radius reduce edge chipping during interrupted cuts, while the MM5 chipformer encourages manageable swarf for safe evacuation. The negative 0° rake angle contributes to lower vibration sensitivity and reinforces the cutting edge under heavy feed conditions. This combination yields stable cutting forces and predictable wear patterns. Fewer tool changes and more consistent productivity The synergy of the WSM30S grade and the insert’s geometry supports longer periods between indexings, increasing net machining time and overall productivity. The coated surface resists thermal degradation, helping to avoid premature loss of edge integrity when machining components that retain heat. For operations that demand reproducible results and short setup cycles, this insert helps to reduce rework and maintain batch consistency. Practical application and workshop guidance for safe deployment The insert is supplied in a standard DNMG form factor compatible with common toolholders; the execution code G and the dimensional codes (size 15, thickness 06) align with established clamping systems. Use the insert for semi‑finishing to finishing passes on stainless steels or heat‑resistant superalloys, selecting appropriate feeds and cutting speeds for the workpiece alloy and machine rigidity. For customers needing cutting data for specific alloys, tailored recommendations are available to match the toolholder and machining strategy. Contact Metav Werkzeuge for tailored application support and availability of the Walter Tools Tiger·tec Silver WSM30S insert — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DNMG150612-MM5-WSM30S-WALTER Designation: DNMG150612-MM5 Full designation: DNMG150612-MM5 WSM30S Manufacturer: Walter Tools Facts Size: 15 Thickness code: 06 Corner radius: 1,2 Rake angle: 0° (negative) Shape: Rhombus 55° Tolerance class: M Special features Series: Tiger·tec Silver Grade: WSM30S Chipbreaker: MM5 Execution: G Material suitability: S / M (superalloys / stainless steels) Coated cemented carbide FAQ What materials is this insert intended for? The DNMG150612-MM5 WSM30S insert is intended for stainless steels and heat‑resistant superalloys (ISO groups M and S) and is optimised for those applications using the Tiger·tec Silver grade. How does the MM5 chipbreaker influence machining? The MM5 chipbreaker on the WSM30S grade promotes controlled chip formation, reducing entanglement and improving evacuation during turning operations with difficult‑to‑cut materials. What does the 1.2 mm corner radius mean for process choice? A 1.2 mm corner radius provides increased edge strength for semi‑finishing to finishing passes, enhancing resistance to chipping when machining interrupted cuts or tougher alloys. Is the negative 0° rake angle suitable for heavy cuts? Yes, the negative 0° rake angle increases edge robustness and reduces vibration sensitivity, making the insert appropriate for heavier feeds where a stable cutting edge is required. Which toolholders are compatible with this insert form? The DNMG form factor is compatible with standard indexable turning toolholders that accept Rhombic 55° inserts; confirm clamping seat and size 15 compatibility with the holder specification. Die Walter AG (brand presentation: Walter Tools) with its headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and forms part of a major industrial group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are used here solely for clarification. There is no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original, factory‑new product of the manufacturer.
DNMG150612-MP3 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WPP05G grade for longer tool life and stable chip formation; the MP3 chipbreaker and rhombic geometry deliver predictable surface quality and efficient machining in steel. Order the insert directly via Metav Werkzeuge or ask the consultants for tailored cutting data and recommendations. DNMG150612-MP3 WPP05G indexable turning insert — Tiger‑tec Gold for steel | Walter Tools The DNMG150612-MP3 WPP05G is an indexable turning insert designed for reliable, high‑productivity steel machining in general turning and finishing applications. Tiger‑tec Gold coating for extended tool life WPP05G grade optimised for steel machining MP3 chipbreaker for reliable chip control Rhombic 55° shape with 1.2 mm corner radius Maximise process reliability with proven coating technology The combination of Tiger‑tec Gold coating and the WPP05G coated carbide grade gives a clear operational advantage in steel turning: increased wear resistance leads to longer tool life and fewer tool changes, while stable chip formation reduces the risk of interruptions. The coating technology is engineered to withstand the thermal and mechanical stresses typical for steel machining, which means more consistent cycle times and less scrap. For production environments aiming at steady output and predictable costs, this insert supports efficient, repeatable results. Geometry and chip control that improve surface quality The rhombic 55° shape together with a 1.2 mm corner radius and MP3 chipbreaker provide a balance between strength and edge sharpness, enabling reliable finishing cuts and dimensional control. The 0° negative rake increases edge robustness for interrupted cuts and heavier feeds, while the chipbreaker design actively controls chip flow to prevent built‑up edge and surface damage. Translating geometry into benefit: less rework, improved surface finish and dependable tool behaviour across varying steel grades. Application scope and production benefits for steel machining Designed for the ISO P material group, this insert is tailored to the heat and chip characteristics of steel; the WPP05G grade covers a broad range from wear‑resistant to tougher steels. The tolerance class M and the insert’s nominal size documentation allow straightforward tool selection and predictable seat fitment in standard holders. In practice, this means faster setup, longer uninterrupted runs and easier process standardisation. For shops seeking pragmatic, technically clear solutions, the insert contributes to higher productivity and simpler tool management. For machining steel with reliable tool life and consistent chip control, contact Metav Werkzeuge for application‑specific cutting data and expert advice on Walter Tools Tiger‑tec Gold inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: DNMG150612-MP3-WPP05G-WALTER Designation: DNMG150612-MP3 WPP05G Manufacturer: Walter Tools Facts Corner radius: 1.2 mm Size: 15 Thickness: 06 Rake angle: 0° (negative) Special features Series: Tiger‑tec Gold Grade: WPP05G (coated carbide) Chipbreaker: MP3 Shape: Rhombic 55° Tolerance class: M Material application: Steel FAQ Which materials is this insert suitable for? The DNMG150612-MP3 WPP05G indexable turning insert (Walter Tools) is optimised for the ISO P group and is therefore intended primarily for machining various steels. What does the MP3 chipbreaker provide in practice? The MP3 chipbreaker on this insert improves chip control for turning operations, reducing entanglement and supporting consistent surface quality during steel machining. How does the Tiger‑tec Gold coating help production? Tiger‑tec Gold coating increases wear resistance and thermal stability of the WPP05G grade, resulting in longer tool life and fewer tool changes in continuous production runs. Is the geometry suitable for finishing and roughing? With a rhombic 55° shape and a 1.2 mm corner radius, the insert is appropriate for finishing and light to medium turning; the 0° negative rake enhances edge strength for more robust cutting conditions. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany. Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not indicate any affiliation. The offered item is original, factory‑new goods from the manufacturer. The Walter AG (marketed as Walter Tools) is part of the Sandvik group.
DNMG150612-MP3 WPP10G WPP10G Wendeplatten - Walter Tools
Combining wear resistance, controlled chip formation and a robust edge geometry ensures reliable performance in series turning operations; ideal for productive steel machining where process security and repeatable tool life are priorities — order the insert directly via Metav Werkzeuge or consult the team for application support. DNMG150612-MP3 WPP10G Turning Insert — Walter Tools, Tiger·tec Gold, for steel machining The DNMG150612-MP3 WPP10G is a 55° rhombic turning insert designed for stable chip control and long tool life in steel turning applications. Tiger·tec Gold coated carbide grade WPP10G MP3 chipbreaker for controlled chip formation Rhombic 55° geometry with 0° negative rake 1.2 mm corner radius for durable cutting edge Durable coated grade that extends productive machining The insert employs the Tiger·tec Gold coating and the WPP10G grade to combine wear resistance with broad applicability on steel. This coated carbide composition reduces flank and crater wear during typical turning cycles, which translates into longer intervals between indexings and fewer tool changes. By favouring a grade tuned to the thermal and mechanical demands of steel machining, the insert supports a more economical cutting process and improved component consistency in production runs. Geometry and chip control that stabilise cutting forces A dedicated MP3 chipbreaker and rhombic 55° shape create predictable chip formation and evacuation, even under variable feeds. The 0° negative rake promotes a stronger cutting edge and reduces the tendency for edge chipping when interruptions or interrupted cuts occur. Together these features help to maintain constant cutting forces, improving surface finish stability and reducing vibration — advantages that lead to higher process security on medium-duty turning tasks. Robust edge design for repeatable edge life in series work With a 1.2 mm corner radius and a standard thickness code, the insert provides a balance between edge strength and accessibility for common turning profiles. The reinforced edge geometry improves resistance to abrasive wear and mechanical overload, enabling repeatable performance across multiple workpieces. This stability supports consistent dimensional accuracy and a reliable programme cadence in batch production, decreasing scrap rates and downtime associated with frequent tool changes. Suited application range and practical integration Engineered primarily for ISO P materials, the insert is particularly effective on a wide range of unalloyed and alloyed steel grades encountered in general turning. The standard DNMG mounting and ISO designation allow straightforward integration with common turning toolholders, facilitating quick replacement and minimal setup. For operations seeking a combination of dependable wear behaviour and versatile chip control, this insert is a practical choice in both jobbing shops and serial manufacturing. Contact Metav Werkzeuge for tailored advice and prompt supply of Walter Tools turning inserts, including DNMG150612-MP3 WPP10G; technical consultancy and order assistance are available from Metav Werkzeuge. Technical data Article number: DNMG150612-MP3-WPP10G-WALTER Designation: DNMG150612-MP3 WPP10G Type: Turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Core specifications Insert size: 15 Thickness code: 06 Corner radius: 1,2 Rake angle: 0° (negativ) Tolerance class: M Chipbreaker: MP3 Materials & special features Suitable for: Steel (ISO P) Grade: WPP10G (coated carbide) Geometry: Rhombus 55° Application focus: stable chip control, series production FAQ What materials is this insert intended for? The DNMG150612-MP3 WPP10G is specified for machining steel (ISO P); the WPP10G grade and Tiger·tec Gold technology are tailored to the thermal and chip-formation behaviour of steel. How does the MP3 chipbreaker benefit machining? The MP3 chipbreaker on this insert promotes controlled chip formation and evacuation, which stabilises cutting forces and improves surface quality during turning operations. Can this insert handle interrupted cuts? The 0° negative rake and a 1.2 mm corner radius increase edge robustness on the DNMG150612-MP3, offering improved resistance to chipping during interrupted cutting. Is the insert compatible with standard DNMG toolholders? Yes, the DNMG designation denotes compatibility with widely used DNMG toolholders, enabling straightforward replacement and minimal setup time. What production benefits does the Tiger·tec Gold grade deliver? Tiger·tec Gold coating with the WPP10G grade enhances wear resistance and consistency, which reduces indexing frequency and supports higher process reliability in serial turning. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com