DNMG150608-MS3 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Silver series and the WSM01 grade for stable edge life and secure chip control in demanding applications; the rhombic 55° geometry with a 0.8 mm corner radius supports productive machining of stainless steel and heat‑resistant alloys. Order the DNMG150608‑MS3 WSM01 insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150608‑MS3 WSM01 turning insert (Rhombus 55°, 0° negative) — Walter Tools The DNMG150608‑MS3 WSM01 is a rhombic 55° turning insert designed for high‑duty machining of stainless steel and heat‑resistant superalloys, featuring the Tiger‑tec Silver series and MS3 chip control. Tiger‑tec Silver performance Optimised for stainless steel and superalloys Rhombic 55° shape for stable cutting 0.8 mm corner radius for reliable edge life Consistent cutting in demanding materials The WSM01 grade from the Tiger‑tec Silver family is formulated for applications where thermal and mechanical loads are high. Classified for ISO groups M and S, the grade supports machining of stainless steel and heat‑resistant superalloys or titanium, delivering stable chip formation and improved resistance to edge wear. The MS3 chipbreaker promotes predictable chips even in long, continuous cuts; this reduces the risk of built‑up edge and supports longer productive tool life, which in turn lowers the cost per component in series production. Improved process reliability and productivity A negative relief geometry with 0° relief (negative) increases insert strength and reduces vibration in interrupted cuts, making the geometry particularly suitable for heavy turning and roughing operations. The combination of a 0.8 mm corner radius and the rhombic 55° shape yields a favourable distribution of cutting forces and enables deeper cuts with predictable tool behaviour. For production environments seeking throughput and repeatability, these characteristics result in shorter cycle times and fewer unplanned tool changes. Design features that support secure handling and simple integration The rhombic 55° profile and standard DNMG form ensure compatibility with a wide range of toolholders and clamping systems; the insert size (15) and thickness (06) conform to common clamping standards for turning operations. The MS3 chipbreaker is engineered for improved chip control in both continuous and semi‑continuous turning, while the tolerance class M guarantees consistent geometry from insert to insert. Together, these features facilitate fast setup, predictable results and easy integration into existing turning processes — whether machining long shafts or facing operations with variable engagement. For specific application advice and availability of Walter Tools Tiger‑tec Silver WSM01 inserts contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for professional guidance and configuration support Technical data Article number: DNMG150608‑MS3‑WSM01‑WALTER Type: Drehwendeschneidplatte / Turning insert Brand: Walter Tools Series: Tiger‑tec Silver Grade: WSM01 Facts Insert size: 15 Thickness: 06 Corner radius: 0.8 mm Relief angle: 0° (negative) Shape: Rhombus 55° Tolerance class: M Special features Chipbreaker: MS3 Material suitability: stainless steel (M), Superalloys/Titanium (S) Designation: DNMG150608‑MS3 WSM01 UID/SKU: DNMG150608‑MS3‑WSM01‑WALTER FAQ Which materials is this insert suitable for? The DNMG150608‑MS3 WSM01 insert is specified for stainless steel (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), reflecting the WSM01 grade’s focus on thermal stability and edge strength. What does the MS3 chipbreaker do? The MS3 chipbreaker shapes chips for controlled evacuation and reduced risk of entanglement; in combination with the Tiger‑tec Silver grade it promotes consistent chip formation during turning operations. How does the negative 0° relief affect cutting? A 0° negative relief increases insert strength and rigidity, improving performance in heavy or interrupted cuts and supporting reliable edge life under high load. Is this insert compatible with standard DNMG toolholders? Yes, the insert conforms to the DNMG form and the rhombic 55° geometry, ensuring compatibility with common turning toolholders that accept DNMG inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is a brand of Walter AG. Protected trademarks and product names are the property of their respective owners. Brand names and trademarks are used solely for explanation. There is no affiliation between our company and the brands named. The offered item is an original, factory‑new product of the manufacturer.
DNMG150608-MS3 WSM10S WSM10S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating and the WSM10S grade for dependable performance when machining difficult-to-cut materials. The insert’s MS3 chipbreaker and Rhombic 55° geometry provide stable chip control and a robust cutting edge, supporting continuous productivity. Order the insert directly via Metav Werkzeuge or consult our technical team for application-specific advice. DNMG150608-MS3 WSM10S indexable turning insert – Tiger·tec Silver coated, rhombic 55° geometry for rostfreier Stahl and superalloys | Walter Tools A DNMG150608-MS3 WSM10S indexable turning insert engineered for demanding turning applications, offering high edge stability and reliable chip control in rostfreier Stahl and heat-resistant alloys. Tiger·tec Silver coated carbide grade WSM10S Optimised MS3 chipbreaker for stable chips Rhombic 55° geometry with 0.8 mm corner radius Negative 0° clearance for robust cutting Consistent performance on difficult-to-cut materials The combination of the Tiger·tec Silver coating and the WSM10S carbide grade is designed to address the challenges of machining rostfreier Stahl and heat-resistant superalloys. The coating reduces adhesion and improves wear resistance, which means fewer unexpected edge failures and a longer effective tool life. For production environments where downtime and tool-change intervals directly affect throughput, this material pairing delivers measurable improvements in process stability and component finish. Stable chip formation and reduced process risk Equipped with the MS3 chipbreaker, the insert promotes controlled chip segmentation and evacuation under varying cutting conditions. Stable chips lower the risk of surface damage and operator hazards while supporting uninterrupted cycles on automated lathes. The chip control geometry also contributes to repeatable cutting forces, which helps maintain consistent surface quality and dimensional accuracy across batches—an important factor in high-volume manufacturing. Robust geometry for demanding turning tasks The insert’s Rhombic 55° profile and 0.8 mm corner radius create a balance between strength at the cutting edge and the ability to achieve fine surface finishes. The negative 0° clearance enhances edge support, making the insert particularly suitable for interrupted cuts and heavier engagement depths where edge robustness is essential. The shape and cutting-edge build-up combine to provide reliable performance during both roughing and finishing when a single insert must handle varied duties. Practical application and process guidance This grade is optimised for rostfreier Stahl and materials classified under ISO group S (heat-resistant superalloys and titanium), offering a pragmatic solution where heat resistance and edge stability are required. Use the insert for stable turning operations with moderate to heavy feeds where chip control is a priority. For tailored recommendations on feeds, speeds and holder compatibility for specific workpiece alloys, Metav Werkzeuge provides application support and material-matching consultancy to help integrate the insert into existing process chains. Choose Walter Tools’ Tiger·tec Silver grade for reliable edge life and contact Metav Werkzeuge for detailed application support and availability. Technical Data Article number: DNMG150608-MS3-WSM10S-WALTER Product: Indexable turning insert Brand: Walter Tools Series: Tiger·tec Silver Grade: WSM10S Facts Plate size: 15 Corner radius: 0.8 mm Plate thickness: 06 Clearance angle: 0° (negative) Special features Geometry: Rhombus 55° Chipbreaker: MS3 Material suitability: S / M Tolerance class: M ISO designation: DNMG150608-MS3 WSM10S FAQ What materials is this insert suitable for? The insert is suitable for rostfreier Stahl and for heat-resistant superalloys and titanium, matching the intended applications of the WSM10S grade. How does the MS3 chipbreaker improve machining? The MS3 chipbreaker on this turning insert promotes controlled chip formation and reliable evacuation, reducing the risk of chip-related surface defects and improving cycle stability. What advantage does the rhombic 55° geometry offer? The Rhombus 55° geometry provides a versatile cutting profile that balances edge strength with finishing capability, supported by the 0.8 mm corner radius for robust performance. Can this insert handle interrupted cuts? Yes, the negative 0° clearance and the strong edge design make the insert well suited to interrupted cutting conditions and heavier engagement depths. Is the Tiger·tec Silver coating beneficial for stainless steels? The Tiger·tec Silver coating enhances wear resistance and reduces adhesion, which is particularly beneficial when machining rostfreier Stahl to avoid built-up edge and maintain surface quality. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names belong to their respective owners. Brand names and trademarks are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
DNMG150608-MU5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a MU5 chipbreaker and a robust negative rake for reliable machining of stainless steels; order directly via Metav Werkzeuge or request application advice from our consultants. DNMG150608-MU5 WMP20G turning insert — Walter Tools, Tiger·tec Gold, for stainless steel DNMG150608-MU5 WMP20G is an indexable turning insert designed for stable machining of stainless steel under medium to heavy conditions Tiger·tec Gold coating for stainless steel MU5 chipbreaker for controlled chips Negative 0° rake for robust cutting Rhombic 55° shape for versatile turning Designed for consistent chip control and longer tool life The DNMG150608-MU5 WMP20G indexable insert combines a coated carbide substrate with the Tiger·tec Gold coating technology to improve edge stability and resistance to wear. The integrated MU5 chipbreaker promotes stable chip formation, reducing the risk of built-up edge on demanding stainless steels. For production environments where repeatability and tool life are decisive, this combination reduces downtime and supports a steady machining cadence while maintaining component quality. Robust geometry for dependable turning performance The rhombic 55° form with a corner radius of 0.8 mm and a negative 0° rake provides a geometry that copes well with the toughness and heat generation typical of stainless steels. The negative rake strengthens the cutting edge, which is beneficial for interrupted cuts and heavier feed rates, while the moderate corner radius balances edge strength with surface finish. The coated grade is engineered to maintain a reliable cutting edge under thermal and mechanical stress, delivering predictable performance in series production. Practical benefits and application guidance Specifically tailored for machining rostfreier Stahl (stainless steel in ISO group M), the insert supports efficient chip evacuation and consistent surface quality in demanding applications. The MU5 chipbreaker is particularly effective when transitioning from finishing to more robust turning operations, as it helps avoid long, stringy chips that complicate unattended machining. For detailed application parameters or recommendations for specific stainless steel grades, Metav Werkzeuge can provide cutting data and selection advice to match the machining strategy and machine capability. Contact Metav Werkzeuge for tailored application support and to secure supply of Walter Tools Tiger·tec Gold inserts Technical Data Article number: DNMG150608-MU5-WMP20G-WALTER Product type: Turning insert Designation: DNMG150608-MU5 WMP20G Series: Tiger·tec Gold Grade / Sort: WMP20G Brand: Walter Tools Core specifications Insert shape: Rhombus 55° Corner radius: 0.8 mm Thickness: 06 Size: 15 Rake: 0° (negative) Chipbreaker: MU5 Tolerance class: M Material group code: M Special features Coating: Tiger·tec Gold Substrate: Coated carbide Optimised for: stainless steel machining Application focus: medium to robust cutting conditions Enhanced chip control and edge stability FAQ What materials is this insert intended for? The DNMG150608-MU5 WMP20G insert is optimised for machining stainless steel (ISO group M), providing controlled chips and improved edge life in these materials. How does the MU5 chipbreaker affect machining? The MU5 chipbreaker on this Walter Tools insert promotes stable chip formation, which reduces chip entanglement and supports unattended or serial turning operations. Why choose a negative 0° rake for cutting stainless steel? A negative 0° rake increases edge robustness and resistance to edge chipping during heavy or interrupted cuts, which is advantageous when machining tougher stainless steels. Is the Tiger·tec Gold coating suitable for high temperatures? The Tiger·tec Gold coating enhances wear resistance and thermal stability compared with uncoated grades, helping to maintain cutting edge integrity under the higher heat typical of stainless steel machining. Can this insert be used for finishing operations? Yes; with the 0.8 mm corner radius and coated grade, the insert can achieve a balance between surface finish and durability, suitable for light finishing to medium turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand‑new goods from the manufacturer.
DNMG150608-MU5 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of reliable chip control, a specialised stainless‑steel grade and robust edge geometry for reproducible turning results; order directly via Metav Werkzeuge or consult our team for application advice. DNMG150608-MU5 WMP20S — Indexable turning insert (for stainless steel) — Walter Tools A DNMG150608‑MU5 WMP20S indexable turning insert designed for stable machining of stainless steels in medium to robust cutting conditions. Tiger‑tec Silver coating technology WMP20S grade for stainless steels MU5 chipbreaker for controlled chips Rhombic 55° shape for versatile turning Reliable machining performance for stainless steels The WMP20S grade, applied within the Tiger‑tec Silver coating system, is developed to address the typical challenges of machining stainless steel: work hardening, adhesive built‑up edge and elevated temperatures. The coated carbide chemistry promotes secure chip formation and consistent cutting behaviour, which reduces the risk of unplanned rework. With the MU5 chipbreaker integrated, the insert supports predictable chip flow and contributes to stable process control during medium to demanding turning operations. Durable edge geometry for extended tool life A negative rake of 0° (negative) combined with an edge radius of 0.8 mm creates a robust cutting edge that resists chipping under intermittent loads. This geometry, together with the coated hardmetal grade, brings improved resistance to flank wear and thermal loading, resulting in longer tool life and fewer index changes. Fewer interruptions for tool changes increase machine utilisation and support a more efficient production flow. Versatile form factor and practical application benefits The rhombic 55° form and the DNMG configuration make the insert suitable for a wide range of turning tasks, from facing to profile turning, where a compact nose and good accessibility are required. The nominal plate size and thickness ensure reliable clamping and repeatable positioning in conventional indexable toolholders. For workshops seeking a balance between productivity and surface quality on stainless steel, this insert offers an effective compromise between cutting performance and handling convenience. Discuss application needs with Metav Werkzeuge for Tiger‑tec Silver inserts and secure a tailored supply recommendation from Metav Werkzeuge. Technical Data Article number: DNMG150608-MU5-WMP20S-WALTER Designation: DNMG150608-MU5 WMP20S Product type: Indexable turning insert Brand: Walter Tools Facts Plate form: Rhombus 55° Plate size: 15 Plate thickness: 06 Cutting edge radius: 0.8 mm Relief / clearance angle: 0° (negative) Chipbreaker: MU5 Grade / sort: WMP20S Special features Series: Tiger‑tec Silver Material group suitability: stainless steel (M) Tolerance class: M Execution: G SKU: DNMG150608-MU5-WMP20S-WALTER FAQ Which materials is this insert intended for? This DNMG150608‑MU5 WMP20S insert is formulated primarily for stainless steel machining (ISO group M), offering secure chip formation and thermal resistance. What is the benefit of the MU5 chipbreaker? The MU5 chipbreaker on the insert promotes controlled chip segmentation and evacuation, supporting consistent surface finish and safer chip handling during turning. How does the Tiger‑tec Silver series improve performance? The Tiger‑tec Silver coating provides a wear‑resistant surface that reduces adhesion and improves thermal stability, enhancing edge retention under the demanding conditions typical of stainless‑steel machining. Is the insert suitable for interrupted cuts or heavy engagement? The combination of a negative relief angle and a 0.8 mm edge radius gives the insert enhanced edge strength, which is beneficial under intermittent loads and more robust cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for clarification purposes only. There is no affiliation between our company and the specified brands. The offered item is an original, factory‑new product of the manufacturer (Walter Tools).
DNMG150608-MU5 WPP05G Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Gold series and the WPP05G grade, this turning insert delivers durable performance and predictable chip control for steel machining; its rhombic 55° geometry and MU5 chipbreaker support stable production. Order directly via Metav Werkzeuge or request application advice from our consultants for integration into existing tool cycles. DNMG150608-MU5 WPP05G — Turning insert, Tiger·tec Gold, for steel by Walter Tools The DNMG150608-MU5 WPP05G is a coated turning insert engineered for reliable steel turning, combining hard-wearing Tiger·tec Gold technology with a MU5 chipbreaker for controlled chip formation. Tiger·tec Gold coating for extended life Rhombic 55° geometry for versatile turning MU5 chipbreaker for consistent chip control 0.8 mm corner radius for process stability Prolonged life and process stability through advanced coating The combination of Tiger·tec Gold technology and a coated substrate provides a robust resistance to wear and abrasion, resulting in longer tool life and reduced changeover frequency. The grade WPP05G is a coated carbide designed to withstand the heat and mechanical stresses typical in steel machining, which helps to maintain cutting-edge integrity and consistent part quality over extended production runs. For operations where predictable performance and low tooling costs per component are priorities, this insert supports uninterrupted cycles and fewer tool interventions. Predictable chip control that stabilises machining Equipped with the MU5 chipbreaker and a rhombic 55° profile, the insert offers controlled chip formation across common steel grades. The designed chip morphology reduces the risk of long, entangling swarf and improves surface finish consistency, while the 0.8 mm corner radius contributes to stable cutting forces and repeatable component dimensions. The insert’s negative 0° relief assists in heavy-duty roughing conditions where rigidity and a secure seat in the tool holder are essential, making it suitable for both steady roughing and finishing passes with predictable behaviour. Optimised for productive steel turning with consistent results Specified for steel applications (P group), this grade is classified to cope with the typical thermal and material-flow conditions encountered when machining unalloyed and alloyed steels. The WPP05G designation indicates a universal-to-wear-resistant balance that is particularly effective across a broad range of steels, helping to reduce the number of grade changes in mixed-production environments. With tolerance class M, the insert supports reliable interchangeability and process repeatability, enabling higher throughput and stable component tolerances within serial production. Contact Metav Werkzeuge for application-specific recommendations and availability of the Walter Tools DNMG150608-MU5 WPP05G turning insert, or request technical support to match the insert to the machining task Technical data SKU: DNMG150608-MU5-WPP05G-WALTER Article designation: DNMG150608-MU5 WPP05G Product type: Turning insert Manufacturer: Walter Tools Key dimensions Shape: Rhombus 55° Corner radius: 0.8 mm Insert size: 15 Thickness: 06 Relief angle: 0° (negative) Materials & special features Grade/series: Tiger·tec Gold Grade: WPP05G Chipbreaker: MU5 Tolerance class: M Application: Steel (P) Substrate/coating: coated carbide FAQ What materials is this insert suitable for? This insert is specified for steel machining (P group); the WPP05G grade and Tiger·tec Gold technology are optimised for unalloyed and alloyed steels. What is the purpose of the MU5 chipbreaker? The MU5 chipbreaker on the DNMG150608-MU5 WPP05G promotes controlled chip formation and safer swarf behaviour, improving surface finish and process reliability during steel turning. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength and helps to stabilise cutting forces; this results in improved tool life and consistent component dimensions when turning steel. Is the insert indexable and easy to replace? As a replaceable turning insert, the DNMG150608-MU5 WPP05G is intended for indexable applications, allowing straightforward replacement and reuse of the holder assembly. Can this insert be used for stainless steel or hardened materials? The DNMG150608-MU5 WPP05G is specified for steel (P). Use on stainless steels or hardened materials is not specified in the provided data and should be validated with application testing or technical consultation. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are mentioned solely for explanatory purposes. There is no affiliation between our company and the trademark owners. The offered item is original and new from the manufacturer.
DNMG150608-MU5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance, the WPP10G coated‑carbide grade and a robust MU5 chipbreaker for efficient steel turning; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. DNMG150608-MU5 WPP10G – Turning insert for steel, Tiger‑tec Gold, Walter Tools The DNMG150608-MU5 WPP10G is a rhombic 55° negative‑rake turning insert designed for reliable finishing and medium‑depth roughing in steel machining. Stable Tiger‑tec Gold coating for long tool life Optimised MU5 chipbreaker for steel turning Rhombic 55° form for versatile turning operations Negative 0° rake for secure cutting performance Extended tool life through advanced coating and geometry The combination of Tiger‑tec Gold coating and the WPP10G grade provides high abrasion resistance and thermal stability, which directly reduces tool change frequency and machining downtime. The insert’s designation DNMG150608-MU5 denotes a compact 15 mm inscribed‑circle size with a thickness code 06 and a 0.8 mm corner radius; together these attributes increase edge robustness and make the insert particularly suited to the heat and chip formation characteristics of steel (ISO P). The 0° (negative) relief angle enhances edge strength, allowing stable cutting in interrupted cuts and heavier engagement without sacrificing component quality. Consistent chip control and surface finish from MU5 chipbreaker The MU5 chipbreaker is engineered for predictable chip formation when machining steels, which improves evacuation and reduces re‑cutting of swarf. Stable chip control contributes to a consistent surface finish and lower cycle‑to‑cycle variation, supporting process reliability on production lathes. With tolerance class M, the insert supports repeatable mounting and predictable tool life, which helps to plan tool budgets and minimise unplanned stops in serial production. The coated‑carbide substrate provides a balance between wear resistance and toughness for universal steel applications. Practical advantages for workshop productivity and process security Rhombic Rhombus 55° geometry affords flexible approach angles for a range of turning tasks, from light finishing to general turning, reducing the need for multiple tool families. The material and coating selection of this insert emphasise process security and productive machining, characteristics associated with the Tiger‑tec Gold series. For operations seeking to improve throughput while maintaining surface integrity, this insert offers a reliable option that lowers overall tooling costs through fewer replacements and stable cutting behaviour. For tailored recommendations on application parameters and rapid supply of Walter Tools inserts such as the DNMG150608-MU5 WPP10G, contact Metav Werkzeuge for technical consultation and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DNMG150608-MU5-WPP10G-WALTER Designation: DNMG150608-MU5 ISO designation: DNMG150608-MU5 WPP10G Brand: Walter Tools Series: Tiger‑tec Gold Facts Size: 15 mm Corner radius: 0.8 mm Thickness code: 06 Relief angle: 0° (negative) Tolerance class: M Special features Coating: Tiger‑tec Gold Grade: WPP10G (coated carbide) Chipbreaker: MU5 Plate form: Rhombus 55° Finish: G Material application: Steel (ISO P) FAQ Which materials are suitable for this insert? The insert is specified for machining steel (ISO P); the WPP10G grade and Tiger‑tec Gold coating are optimised for the heat and chip formation typical of unalloyed and alloyed steels. What does the MU5 chipbreaker achieve in practice? The MU5 chipbreaker promotes controlled chip segmentation and efficient evacuation, supporting consistent surface finish and reducing the risk of chip entanglement during turning operations. How does the negative 0° relief angle affect cutting performance? The 0° (negative) relief angle increases edge strength and resistance to chipping, improving performance in interrupted cuts and when higher radial loads are present. Is this insert suitable for finishing as well as roughing? Yes; the rhombic Rhombus 55° geometry and 0.8 mm corner radius make the insert versatile for both finishing passes and general turning, depending on machine setup and cutting parameters. What does tolerance class M mean for mounting and interchangeability? Tolerance class M indicates medium precision for the insert dimensions, ensuring reliable seating and repeatability across toolholders, which supports predictable tool life in production settings. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Mark names and registered trademarks are used for explanatory purposes only. There is no affiliation between our company and the mentioned brands; the offered item is an original, factory‑new product of the manufacturer.
DNMG150608-MU5 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a robust MU5 chipbreaker for consistent chip control and extended tool life; order supply or contact Metav Werkzeuge for application advice and availability. DNMG150608-MU5 WPP20G indexable turning insert – Rhombic 55° geometry, for steel, Walter Tools DNMG150608-MU5 WPP20G is a rhombic 55° indexable turning insert designed for productive steel machining applications Tiger·tec Gold coated WPP20G grade Optimised for steel machining (ISO group P) Rhombic 55° geometry, 0.8 mm corner radius MU5 chipbreaker for stable chip control High-performance grade for steel turning with measurable gains The WPP20G grade from Tiger·tec Gold delivers a balanced combination of wear resistance and toughness tailored to steel machining. As a coated carbide insert, it is engineered to withstand the thermal and mechanical demands of continuous turning operations, which translates into longer tool life and fewer interruptions for insert changes. The material design reduces flank wear and maintains a sharper cutting edge under typical cutting temperatures, enabling more consistent part quality and improved process reliability. For production environments seeking predictable cycle times, this insert supports higher productivity through reduced tooling intervention and stable dimensional control. Geometry and chip management that protect the process The rhombic 55° form with a 0.8 mm corner radius and the MU5 chipbreaker combine to control chip formation and improve stability during cutting. The 0° negative clearance increases edge strength for interrupted cuts and heavy sections while the MU5 geometry shapes chips to evacuate reliably in long or short-turning applications. This design reduces the risk of chip-related downtime and protects the workpiece surface finish, which is particularly beneficial when machining unalloyed and alloyed steels. The result is a consistent surface quality and fewer secondary operations for rework, contributing directly to lower overall process costs. Practical application guidance and process support Selection of an insert such as this should consider cutting speed, feed and depth of cut in relation to the intended steel grade. The DNMG150608-MU5 WPP20G insert is suited to a wide range of steel turning tasks and offers a good compromise between economy and stability for general-purpose turning. When integrated into a properly selected toolholder and clamping system, the coated grade and chipbreaker deliver measurable gains in tool life and part quality. For customers requiring parameter recommendations or suitability checks for specific steels, Metav Werkzeuge provides technical advice to match cutting data to application requirements and machine capability. Contact Metav Werkzeuge for tailored application advice and to secure Walter Tools DNMG150608‑MU5 WPP20G inserts for reliable steel turning performance Technical data Article number: DNMG150608-MU5-WPP20G-WALTER Designation: DNMG150608-MU5 WPP20G Product type: Indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP20G Tolerance class: M Core data Geometry: Rhombic 55° Corner radius: 0.8 mm Clearance angle: 0° (negative) Plate size: 15 Thickness code: 06 Special features Chipbreaker: MU5 Coating/Material: Coated carbide, Tiger·tec Gold technology Application group: Steel (ISO group P) Suitable for unalloyed and alloyed steels FAQ What workpiece materials is this insert intended for? The DNMG150608‑MU5 WPP20G insert is specified for steel machining (ISO group P) and is optimised for typical heat and chip behaviour encountered when turning unalloyed and alloyed steels. How does the MU5 chipbreaker affect machining performance? The MU5 chipbreaker on the DNMG150608‑MU5 WPP20G shapes and controls chips to reduce clogging and improve evacuation, resulting in more stable cutting conditions and improved surface finish when turning steel. Which advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP20G grade enhances wear resistance and edge life under elevated temperatures, supporting longer tool life and consistent performance in production turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned solely for explanation. The offered item is an original, factory-new product of the manufacturer. Walter Tools is included as the manufacturer where applicable.
DNMG150608-MU5 WSM20S MU5 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM20S grade for reliable edge stability and secure chip control when machining stainless steels and heat‑resistant superalloys; order directly via Metav Werkzeuge or consult our specialists for cutting data and tooling guidance DNMG150608-MU5 WSM20S turning insert — Tiger·tec Silver coated for stainless steels & superalloys | Walter Tools DNMG150608-MU5 WSM20S is a rhombic 55° turning insert with MU5 chipbreaker, designed for demanding machining of rostfreier Stahl and heat‑resistant superalloys Tiger·tec Silver coated carbide grade WSM20S Designed for stainless steels and superalloys Rhombic 55° form with 0.8 mm corner radius MU5 chipbreaker for secure chip control Reliable cutting performance for demanding alloys The DNMG150608-MU5 WSM20S insert combines a modern coated carbide substrate with the Tiger·tec Silver coating to provide enhanced heat resistance and stable cutting edges. This results in more consistent tool life when machining materials that generate high temperatures and sticky chips. The engineering behind the grade focuses on maintaining a sharp, wear‑resistant edge so that process stability is improved and unexpected tool changes are reduced, which supports continuous production runs in industrial environments. Geometry engineered to boost productivity The insert’s rhombic 55° geometry and 0.8 mm corner radius give a balance between strength and form accuracy, while the 0° negative rake supports tougher cutting conditions. Together with the MU5 chipbreaker, this geometry promotes controlled chip formation and evacuation, lowering the risk of built‑up edge and surface damage. The net result is fewer interruptions for rework, predictable surface finish, and a measurable increase in machining throughput for components made from rostfreier Stahl or nickel‑based alloys. Clear guidance for material applications This grade is specified for ISO groups M and S, meaning suitability for stainless steels and superalloys/titanium alloys. The WSM20S composition is optimised to resist thermal and abrasive wear common in these groups; the chipbreaker design helps break long, stringy chips into manageable segments. For shops new to these materials, moderate cutting speeds with stable feeds and rigid clamping are recommended to exploit the insert’s edge stability and to avoid chatter, which preserves both tool life and surface quality. Seamless integration into production tooling Tolerance class M and the standard DNMG form factor ensure compatibility with widely used toolholders and systems, allowing straightforward replacement without adapting holders. The coated grade and chipbreaker combination suits applications from single‑pass finishing to more aggressive roughing where material variability is present. Selecting this insert supports predictable cycle times and easier process planning, especially in sectors such as aerospace, energy and medical components where material performance demands are high and reproducibility is essential. Contact Metav Werkzeuge for tailored cutting data and ordering assistance on Walter Tools inserts — Metav Werkzeuge can advise on feeds, speeds and holder compatibility to get the best results from the Tiger·tec Silver WSM20S grade Technical data Article number: DNMG150608-MU5-WSM20S-WALTER Manufacturer: Walter Tools Product type: Drehwendeschneidplatte (turning insert) Series: Tiger·tec Silver Facts Insert size: 15 mm Plate thickness: 06 Corner radius: 0.8 mm Free angle: 0° (negative) Tolerance class: M Special features Grade: WSM20S (coated carbide) Chipbreaker: MU5 Insert form: Rhombus 55° Material suitability: stainless steels (M), superalloys/titanium (S) Application focus: difficult‑to‑machine materials, secure chip control FAQ Which materials is this insert suitable for? The DNMG150608-MU5 WSM20S insert is specified for ISO groups M and S, making it suitable for rostfreier Stahl (stainless steels) and heat‑resistant superalloys including titanium alloys. How does the MU5 chipbreaker affect machining? The MU5 chipbreaker on this turning insert promotes stable chip segmentation and evacuation, improving surface quality and reducing the risk of built‑up edge when machining sticky or temperature‑sensitive materials. Is the insert compatible with standard DNMG toolholders? Yes, the DNMG150608-MU5 form and tolerance class M ensure compatibility with standard DNMG toolholders, enabling straightforward replacement in existing tool systems. What benefits does the Tiger·tec Silver coating deliver? The Tiger·tec Silver coating enhances heat resistance and wear protection, increasing edge life and maintaining process stability during the machining of demanding alloys. Can this insert be used for finishing as well as roughing? The combination of 0.8 mm corner radius and robust grade allows both finishing and more aggressive roughing strategies, depending on cutting parameters and clamping rigidity. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Mention of brand names serves explanatory purposes only and does not imply any affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original, factory‑new product of the stated manufacturer.
DNMG150608-MW5 WKK10S Wendeplatten - Walter Tools
Take advantage of high wear resistance and reliable chip control for efficient cast-iron turning; order directly via Metav Werkzeuge or consult our experts for application-specific recommendations. DNMG150608-MW5 WKK10S — Indexable turning insert, Tiger·tec Silver, for cast iron (Walter Tools) A DNMG150608-MW5 WKK10S indexable turning insert designed to deliver stable chip formation and long tool life in cast-iron machining with a Rhombic 55° geometry. Tiger·tec Silver coated carbide for wear resistance Optimised for cast iron (ISO group K) Rhombic 55° shape with 0° negative rake 0.8 mm corner radius and MW5 chipbreaker Productivity gains from advanced coating and grade The combination of the Tiger·tec Silver coating and the WKK10S carbide grade yields a marked improvement in abrasive-wear resistance, which translates into longer tool life and fewer insert changes on the machine. As a result, cycle times benefit from sustained cutting parameters and reduced downtime. Highlighted here is the rational advantage: fewer tool interventions mean a measurable increase in production efficiency and predictable process behaviour when machining cast-iron components. Reliable chip control and geometry for consistent results Configured with the MW5 chipbreaker, a Rhombic 55° form and a 0° negative rake, the insert offers controlled chip breaking in the typically short, brittle chips of cast iron. The 0.8 mm corner radius provides a compromise between edge strength and achievable surface finish, helping to maintain dimensional accuracy during facing and light turning operations. This combination supports stable cutting forces and simplifies process set-up, particularly for repetitive series production. Practical handling and predictable economy in the workshop The insert’s specification (size 15, thickness 06) and tolerance class M ensure compatibility with common toolholders and predictable fitting behaviour during re-clamping. The grade’s focus on abrasive resistance and stable chip formation reduces unexpected edge wear, which improves first-pass yield and total cost per part. For fitting advice, recommended cutting data or holder selection, Metav Werkzeuge can provide technical guidance and matching toolholder suggestions to ensure immediate, reliable integration into the machining process — call +49 2822 7131930 or email info@metav-werkzeuge.com for precise recommendations. Contact Metav Werkzeuge today for tailored cutting data and delivery options for Walter Tools Tiger·tec Silver inserts Technical data Article number / SKU: DNMG150608-MW5-WKK10S-WALTER Designation: DNMG150608-MW5 WKK10S Product type: Indexable turning insert Brand: Walter Tools Series: Tiger·tec Silver Facts Corner radius: 0.8 mm Free rake: 0° (negative) Plate form: Rhombic 55° Plate size: 15 Plate thickness: 06 Tolerance class: M Special features Grade: WKK10S Chipbreaker: MW5 Coating: Tiger·tec Silver (coated carbide) Material application: Cast iron (ISO group K) FAQ What materials is this insert suitable for? The DNMG150608-MW5 WKK10S insert from Walter Tools is optimised for cast iron (ISO group K) and its chipbreaker and grade are tailored for the abrasive wear and short chips typical of these materials. Which chipbreaker should be expected and what is its benefit? This insert features the MW5 chipbreaker, which promotes reliable chip fragmentation in cast-iron turning and helps maintain consistent surface quality and tool life. How does the Rhombic 55° shape affect machining? The Rhombic 55° geometry provides versatile approach angles for facing and turning operations, improving access to detail features while supporting stable cutting forces for repeatable results with the WKK10S grade. Is the grade suitable for serial production? Yes, the WKK10S grade with Tiger·tec Silver coating is designed for stable, productive cutting and prolonged tool life, making it well suited for series production of cast-iron components. What should be considered when selecting a toolholder? Select a toolholder compatible with DNMG-format inserts and the specified plate size and thickness; ensure correct clamping and tool projection to benefit fully from the insert’s chip control and corner radius characteristics. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanation only; there is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
DNMG150608-MW5 WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of robust edge strength, reliable chip control and the Tiger·tec Silver coating for consistent performance in cast iron turning; order the insert via Metav Werkzeuge or consult our specialists for process-adapted advice. Turning insert DNMG150608-MW5 WKK20S — Rhombic 55°, Tiger·tec Silver (Walter Tools) The DNMG150608-MW5 WKK20S is a negative-rake, rhombic indexable turning insert optimised for efficient machining of cast iron components. Tiger·tec Silver coating for high wear resistance Optimised MW5 chipbreaker for stable chips Designed for cast iron (K) machining Rhombic 55° geometry, 0.8 mm corner radius High process reliability through coating and grade The combination of the Tiger·tec Silver series and the WKK20S grade delivers a balance of wear resistance and toughness tailored to abrasive cast iron applications. The deposited coating reduces flank wear and maintains a sharper cutting edge for longer, which translates into fewer tool changes and steadier part quality. In practical terms, this means improved process stability during longer production runs and reduced interruptions caused by premature wear. The negative relief angle supports interrupted cuts and strengthens the cutting edge, making it suitable for demanding workpieces where edge security is essential. Consistent chip control and geometric advantages Equipped with an MW5 chipbreaker and a rhombic 55° plate form, the insert produces predictable, manageable chips when cutting Gusseisen. The chipformer geometry is designed to break and evacuate chips efficiently, lowering the risk of re-cutting and improving surface finish. The 0.8 mm corner radius balances edge strength with achievable surface quality; a larger radius increases stability, while the rhombic form provides good accessibility in shoulder and profile turning. These design choices reduce cycle-time variability and help maintain dimensional accuracy across batches. Practical benefits for shop-floor integration The insert’s designation corresponds to standard toolholder systems, enabling straightforward tool changes and minimal setup time. With a plate thickness code of 06 and an insert size reference of 15, holders and tool posts commonly used in turning centres can be fitted without special adaptations. The tolerance class M ensures repeatable seating and stable clamping, which supports reliable tool life forecasting and simpler inventory management. For workshops aiming to improve throughput while keeping maintenance predictable, the combination of geometry, chip control and coating technology supports measurable efficiency gains. Application guidance and safety considerations This grade is specifically formulated for cast iron (designation K); the cutting data should be selected to suit the casting type and machining strategy. Using the negative relief and robust chipbreaker, higher feeds can be considered for stable setups to accelerate material removal, while finishing passes benefit from moderate feeds and cutting speeds that respect the coating’s recommended range. When switching to this insert from a different grade, monitor initial runs to establish optimal feeds and speeds and verify surface finish and dimensional stability. Contact Metav Werkzeuge for tailored recommendations on toolholders, cutting data and stock availability — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: DNMG150608-MW5-WKK20S-WALTER WPL designation: DNMG150608-MW5 WKK20S Series: Tiger·tec Silver Grade: WKK20S Manufacturer: Walter Tools Facts Insert size: 15 Thickness: 06 Corner radius: 0.8 mm Relief angle: 0° (negative) Shape angle: 55° Special features Chipbreaker: MW5 Coating: Tiger·tec Silver Material group: Cast iron (K) Tolerance class: M Plate form: Rhombus 55° FAQ Is this insert suitable for machining grey and nodular cast iron? The DNMG150608-MW5 WKK20S from Walter Tools is formulated for Gusseisen (cast iron) applications; the Tiger·tec Silver coating and MW5 chipbreaker support both grey and nodular cast iron under appropriate cutting conditions. Which chipbreaker action can be expected with the MW5 geometry? The MW5 chipbreaker on this indexable insert promotes short, controlled chips during turning of cast iron, improving evacuation and reducing the likelihood of entanglement at typical feeds used for roughing and semi-finishing. Can this insert be used in interrupted cuts or roughing operations? Yes, the 0° negative relief and robust corner radius give the insert enhanced edge strength, making it suitable for interrupted cuts and heavier engagement when matched with stable toolholding. What identifiers should be used when ordering replacements or spare inserts? Order using the article number DNMG150608-MW5-WKK20S-WALTER or the WPL designation DNMG150608-MW5 WKK20S to ensure the correct Tiger·tec Silver grade and chipbreaker configuration are supplied. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the brands listed. The offered item is an original, factory-new product of the manufacturer.
DNMG150608-MW5 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the MW5 chipbreaker to secure consistent edge life and reliable chip control for steel machining; order directly via Metav Werkzeuge or consult the team for application-specific advice. DNMG150608-MW5 WPP05G indexable turning insert — robust Tiger·tec Gold grade for steel DNMG150608-MW5 WPP05G is a negative-geometry, rhombic 55° turning insert engineered for dependable performance in steel turning applications Tiger·tec Gold coated carbide grade WPP05G Optimised MW5 chipbreaker for steels Rhombic 55° form with 0.8 mm corner Negative 0° geometry for robust edge control Longer tool life through advanced coating technology The combination of the Tiger·tec Gold coating and the WPP05G grade provides a balance of wear resistance and toughness that is advantageous when machining steels. The coated carbide construction offers improved thermal stability and reduced flank wear, which translates into longer intervals between indexings and lower overall tooling costs. This performance is especially relevant in serial production where consistent tool life and predictable replacement cycles contribute directly to process efficiency and reduced downtime. Geometry that supports consistent surface quality The rhombic 55° shape, paired with a 0.8 mm corner radius, delivers controlled engagement and repeatable cutting behaviour. The negative 0° clearance geometry supports a robust cutting edge that resists chipping under interrupted cuts or heavy feeds, while the chosen corner radius helps to achieve a dependable surface finish on turned parts. These design choices make the insert suitable for a range of general turning tasks where edge stability and predictable results are priorities. Chip control designed for steel machining The MW5 chipbreaker is optimised for steels (ISO group P), enabling efficient breakage and evacuation of chips in typical turning conditions. Stable chip formation reduces the risk of entanglement and minimises secondary operations for chip removal. In conjunction with the Tiger·tec Gold coating, the chipbreaker contributes to a consistent cutting process, which supports higher material removal rates with maintained component quality. Practical integration and process benefits Tolerance class M and the standard DNMG format ensure compatibility with a wide range of toolholders and turning tool systems used in workshops and production environments. The insert’s specification supports streamlined tool management and easy replacement, allowing shops to maintain process continuity. By focusing on consistent wear behaviour and controlled chip flow, the insert helps to reduce scrap rates and supports predictable production planning. Contact Metav Werkzeuge for tailored application advice on the Tiger·tec Gold DNMG150608-MW5 WPP05G turning insert by Walter Tools and request a machining recommendation or quotation Technical data SKU: DNMG150608-MW5-WPP05G-WALTER Article: DNMG150608-MW5 WPP05G Product type: Indexable turning insert Manufacturer: Walter Tools Grade: WPP05G Series: Tiger·tec Gold Dimensions & numerical data Inscribed circle / size: 15 mm Thickness: 6 mm Corner radius: 0.8 mm Clearance angle: 0° (negative) Tolerance class: M Features & applications Coating: Tiger·tec Gold Base material: Coated carbide Chipbreaker: MW5 Plate form: Rhombic 55° Material group: Steel (ISO P) Typical use: General turning operations FAQ Which materials is this insert intended for? The DNMG150608-MW5 WPP05G insert by Walter Tools is specified for the ISO P material group, i.e. a range of steels, and is optimised for typical steel heat and chip behaviour. What are the key geometric parameters to consider? Key figures are the 15 mm inscribed circle, 6 mm thickness, 0.8 mm corner radius and a negative 0° clearance; these dimensions define the mechanical stability and cutting engagement of the insert. Is this insert suitable for interrupted cuts or heavy feeds? Yes, the negative 0° geometry and robust edge design of the DNMG150608-MW5 WPP05G support interrupted cutting and higher feed scenarios with improved edge control. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WPP05G grade enhances thermal resistance and reduces flank wear, which contributes to longer tool life and more consistent cutting performance when machining steels. What advantage does the MW5 chipbreaker provide in process terms? The MW5 chipbreaker promotes controlled chip formation and effective evacuation during turning of steels, reducing chip-related interruptions and supporting stable machining cycles. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any partnership with our company. The offered item is an original, factory-new product from the manufacturer.
DNMG150608-MW5 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from consistent chip control and extended tool life thanks to the Tiger·tec Gold coating combined with the MW5 chipbreaker and a Rhombic 55° geometry; these features support efficient, reproducible steel machining. Order the DNMG150608-MW5 WPP10G indexable insert via Metav Werkzeuge or consult their technical team for application advice. DNMG150608-MW5 WPP10G — indexable turning insert, Tiger·tec Gold, for steel (Walter Tools) The DNMG150608-MW5 WPP10G is an indexable turning insert optimised for steel machining, offering a Tiger·tec Gold coated grade and a Rhombic 55° geometry for reliable cutting performance in ISO P applications Tiger·tec Gold coating for extended tool life Optimised MW5 chipbreaker for stable chip control Rhombic 55° insert with 0.8 mm corner radius Suitable for steel machining (ISO P) Reliable performance for demanding steel applications The combination of the WPP10G grade and Tiger·tec Gold coating yields a balanced cutting behaviour designed specifically for steel (ISO P). This insert provides a controlled wear pattern and consistent edge stability, which reduces process variability and supports predictable tool-life planning. The Rhombic 55° geometry contributes to versatile turning angles and secure seating in standard DNMG pockets, while the 0° negative clearance stabilises contact conditions at the cutting edge. These attributes translate into lower machine downtime and a more economical machining cycle when producing medium-duty turned components from unalloyed and alloyed steels. Extended productivity through chip control and insert geometry Stable chip formation is a central productivity factor; the MW5 chipbreaker is shaped to break and evacuate chips efficiently during continuous and interrupted cuts in steel. As a result, machine cycle times can be shortened and tool-change frequency reduced, supporting higher overall throughput. The nominal corner radius of 0.8 mm ensures a robust cutting edge that tolerates moderate feed rates while still delivering acceptable surface integrity. For production environments where repeatability and process security are priorities, this insert's geometry and chip management offer tangible gains in operational efficiency. Material compatibility and grade advantages explained The coated cemented carbide grade WPP10G is engineered for the thermal and mechanical demands of steel machining, combining wear resistance with sufficient toughness for general-purpose turning. Where materials fall under ISO group P, the insert provides predictable behaviour across a wide range of steels. The coating technology improves resistance to abrasive wear and heat-related edge softening, extending usable cutting life compared with uncoated grades. For engineers assessing tool selection, this insert represents a pragmatic compromise between longevity and cost-effectiveness, minimising unexpected resharpening or costly part rework. For reliable steel turning with Tiger·tec Gold performance, contact Metav Werkzeuge to request availability of the DNMG150608-MW5 WPP10G insert or to discuss optimal cutting parameters for specific steel grades Technical data SKU: DNMG150608-MW5-WPP10G-WALTER Article: DNMG150608-MW5 WPP10G Type: indexable turning insert Manufacturer: Walter Tools Facts Inscribed circle: 15 Thickness code: 06 Corner radius: 0.8 mm Clearance angle: 0° (negative) Shape: Rhombic 55° Tolerance class: M Materials & special features Coating / grade: Tiger·tec Gold / WPP10G Chipbreaker: MW5 Suitable for: Steel (ISO P) Substrate: coated cemented carbide FAQ What materials is this insert suitable for? The DNMG150608-MW5 WPP10G insert is specified for steel machining (ISO P); the WPP10G grade and Tiger·tec Gold coating are tuned to the heat and chip formation characteristics of steels. How does the MW5 chipbreaker influence machining? The MW5 chipbreaker on the DNMG150608-MW5 WPP10G helps to produce short, controllable chips and supports reliable evacuation, which improves surface finish consistency and reduces the risk of chip entanglement. What does the 0° (negative) clearance mean in practice? A 0° negative clearance on this insert causes a more robust cutting edge engagement, increasing stability under heavy or interrupted cuts and improving edge strength for demanding turning operations. Which toolholders accept this insert form? The DNMG designation indicates the insert form; holders designed for DNMG1506-style inserts will accept the DNMG150608-MW5 WPP10G when the pocket and clamp are compatible with standard DNMG geometry. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150608-MW5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the MW5 chipbreaker for durable, predictable turning performance on steel; the robust Rhombic 55° geometry and 0.8 mm corner radius support consistent edge life and surface quality in serial production. Order the DNMG150608-MW5 WPP20G directly via Metav Werkzeuge or ask our consultants for application advice. DNMG150608-MW5 WPP20G indexable turning insert for steel — Walter Tools The DNMG150608-MW5 WPP20G is a coated carbide indexable turning insert engineered for productive steel machining, combining Tiger·tec Gold coating with an MW5 chipbreaker in a Rhombic 55° format. Tiger·tec Gold coating for long tool life MW5 chipbreaker for predictable chips Rhombic 55° form for versatile turning 0.8 mm corner radius for robust edge Consistent performance and extended tool life for steel turning The combination of Tiger·tec Gold coating and coated carbide substrate delivers elevated wear resistance, enabling longer tool life under the typical heat and demands of steel machining. The advanced coating technology reduces flank and crater wear, which translates into fewer insert changes and steadier cycle times. For production environments where consistent cutting edge behaviour is required, this configuration supports repeatable results and helps to lower overall tooling expenditure through extended service intervals. Predictable chip control and improved surface finish The MW5 chipbreaker is designed to shape chips reliably and reduce the risk of interruption from poor chip evacuation. Matched with a Rhombic 55° geometry and a 0° (negative) rake, the system produces manageable chips and stabilises the cutting forces, resulting in improved surface quality and easier post-process handling. This predictable chip formation benefits both automated cells and manual lathes, where uncontrolled chips can otherwise compromise cycle reliability and operator safety. Robust edge geometry that supports productivity A 0.8 mm corner radius strengthens the cutting edge against impact and thermal loading during interrupted cuts and mixed-material batches. The compact plate size and the round-corner design contribute to balanced cutting conditions that reduce vibration and micro-chipping. As a result, the insert maintains dimensional stability across longer runs, which means fewer interruptions for re‑setting and inspection and a higher effective machine uptime for productive shops. Application focus and process advantages for steel components Designed specifically for group P materials per ISO classification, this insert is optimised for unalloyed and alloyed steel, accommodating the heat generation and chip characteristics typical of those materials. The WPP20G grade offers a versatile balance between wear resistance and toughness, supporting a broad range of roughing and finishing operations. In practice, this yields a favourable cost-per-part ratio and predictable tool performance across mixed steel workpieces, enhancing planning reliability for batch production. Choose Walter Tools Tiger·tec Gold inserts for greater process stability — contact Metav Werkzeuge for tailored cutting data and application support via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: DNMG150608-MW5-WPP20G-WALTER Label: Drehwendeschneidplatte DNMG150608-MW5 WPP20G Walter Tools SKU: DNMG150608-MW5-WPP20G-WALTER Core Data Plate form: Rhombus 55° Corner radius: 0.8 mm Plate size: 15 Plate thickness: 06 Clearance angle: 0° (negative) Tolerance class: M Special features Grade: WPP20G Series: Tiger·tec Gold Chipbreaker: MW5 Material application: Steel (P) Substrate: coated carbide Designation without grade: DNMG150608-MW5 FAQ What materials is this insert suitable for? The DNMG150608-MW5 WPP20G is specified for steel machining (ISO group P) and is formulated to manage the heat and chip forms typical of unalloyed and alloyed steels. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold provides enhanced wear resistance and thermal stability, which helps the insert maintain cutting edge integrity and extend service life during steel turning. What benefits does the MW5 chipbreaker bring? The MW5 chipbreaker produces reliable chip control and reduces the risk of chip-related interruptions, aiding both surface finish and handling in automated and manual operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150608-NFT WS10 WS10 Wendeplatten - Walter Tools
Take advantage of the combination of robust edge geometry, efficient chip control and consistent grade performance for smooth turning operations. Order the insert directly via Metav Werkzeuge or consult the technical advisors for application-specific selection. DNMG150608-NFT WS10 – Rhombic 55° turning insert with NFT chipbreaker by Walter Tools DNMG150608-NFT WS10 is a rhombic 55° turning insert engineered for stable chip formation and versatile general turning tasks in industrial machining settings. NFT chipbreaker for reliable chip control Rhombic 55° geometry for versatile turning 0.8 mm corner radius for robust cutting edge 0° negative clearance for secure cutting Boosted productivity through targeted geometry and chip control The combination of the rhombic 55° form and the NFT chipbreaker delivers predictably shaped chips and stable cutting behaviour, which directly supports higher process reliability. The insert’s WS10 grade — a coated carbide class — is designed to balance wear resistance and toughness; this means longer periods between tool changes when matched correctly to the workpiece and cutting data. With a 0.8 mm corner radius the cutting edge tolerates interrupted cuts and light radial engagements without premature edge failure, while the 0° negative clearance contributes to a secure tool engagement that reduces unwanted vibrations on many turning operations. The measured design reduces downtime and allows planners to schedule predictable tool-change intervals, supporting steady machine occupancy and improved throughput. Practical guidance for selection and safe application Material suitability for this grade is catalog-dependent, so compatibility should be verified against the product matrix before specifying the insert for a particular workpiece material. In practice, this type of rhombic insert with an NFT chipbreaker is typically chosen where consistent chip control and edge strength are required — for example in medium-duty roughing and finishing sequences where controlled chips prevent entanglement and ensure stable surface finishes. The tolerance class M indicates standardised dimensional accuracy for reliable insert seating and repeatability in multi-station set-ups. If uncertainty remains regarding cutting speeds, feeds or grade matching, technical consultation is recommended to adapt cutting data and secure optimal performance. Handling, mounting and the case for consistent tool life The compact form and standardised sizing simplify storage and replacement planning; inserts presenting a clear geometry code such as this make ERP and tool management straightforward. Correct mounting and stable clamping are essential: the insert’s profile and tolerance class M require properly maintained toolholders to achieve the promised repeatability. Combined with the WS10 coating and the NFT chipbreaker, the component is intended to contribute to consistent tool life when operated within recommended parameters. Documented tool behaviour and controlled chip evacuation reduce scrap risk and support quality assurance processes, which is particularly relevant in batch production or repetitive turning tasks. For production-driven turning operations, specify the WS10 graded DNMG150608-NFT insert with NFT chipbreaker from Walter Tools and contact Metav Werkzeuge for tailored advice or to place an order: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: DNMG150608-NFT-WS10-WALTER Designation: DNMG150608-NFT WS10 Manufacturer: Walter Tools Facts Inscribed circle: 15 mm Corner radius: 0.8 mm Clearance angle: 0° (negative) Thickness code: 06 Tolerance class: M Special features Geometry: Rhombus 55° Chipbreaker: NFT Grade: WS10 (coated carbide) Execution: G Material specification: Catalog-dependent Series: Walter Schneidstoffsorte - Serie offen SKU: DNMG150608-NFT-WS10-WALTER FAQ What chip behaviour can be expected from this insert? The DNMG150608-NFT WS10 insert with the NFT chipbreaker produces short, controlled chips under suitable cutting conditions, supporting stable evacuation and reducing the risk of chip entanglement. Which workpiece materials suit the WS10 grade? Material suitability for the WS10 grade is catalog-dependent; check the product matrix to confirm whether the DNMG150608-NFT WS10 is recommended for the intended material and cutting range. What does the 0° negative clearance mean in practice? A 0° negative clearance provides a neutral cutting face geometry that helps secure the insert during engagement, improving stability in interrupted cuts and reducing the tendency to chatter. How does the 0.8 mm corner radius affect surface finish and edge life? The 0.8 mm corner radius balances a robust cutting edge with reasonable surface finish capability; it is particularly beneficial where occasional interruptions or moderate depths of cut occur. Is the tolerance class M relevant for multi-station production? Yes, tolerance class M ensures consistent dimensions for interchangeability between toolholders and inserts, which is important for reproducible set-ups in multi-station or high-volume production. The Walter AG (brand appearance: Walter Tools) with operations in Tübingen is a worldwide manufacturer of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, factory-new goods from the manufacturer.
DNMG150608-NFT WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of durable coating, stable chip control and a geometry optimised for varied turning tasks to reduce tool changes and maintain consistent part quality. Order the insert directly via Metav Werkzeuge or ask the consultants for matching toolholder and cutting-data recommendations. DNMG150608-NFT WSM20S – Indexable turning insert, Tiger·tec Silver coating, 0° negative rake (Walter Tools) The DNMG150608-NFT WSM20S is a rhombic turning insert intended for machining stainless steels and heat‑resistant alloys, offering robust chip control and reliable edge stability for demanding production environments Tiger·tec Silver coating for higher wear resistance WSM20S grade for stainless and heat‑resistant alloys Rhombic 55° geometry for versatile turning NFT chipbreaker for stable chip formation Improved cutting performance in stainless and superalloys The coated carbide grade WSM20S, part of the Tiger·tec Silver series, is engineered specifically for the challenges of stainless steels and superalloys. The combination of a wear‑resistant coating and a substrate optimised for heat resistance reduces adhesion and flank wear during interrupted or continuous cuts. This results in longer tool life and fewer unscheduled tool changes, which contributes directly to more predictable machining cycles and improved overall productivity. Reliable geometry and chip control for steady results A Rhombic 55° insert form combined with an NFT chipbreaker delivers consistent chip segmentation and evacuation even under adverse cutting conditions. The 0° negative rake geometry strengthens the cutting edge and supports stable cutting forces, while the 0.8 mm corner radius provides a balance between edge strength and surface finish. Together these features promote repeatable part quality and reduce the risk of built‑up edge formation when turning tough, work‑hardening stainless materials. Process efficiency through reduced downtime and consistent quality By favouring stable chip formation and a robust edge, this insert helps to shorten non‑productive time associated with tool changes and rework. The wear resistance offered by the Tiger·tec Silver technology supports higher metal removal rates where the machine and component tolerances allow, improving the cost‑per‑part ratio in medium to large‑batch production. Selecting the appropriate grade and chipbreaker for the specific operation contributes to predictable tool life and measurable process reliability. Practical integration into production workflows The insert is supplied in the standard DNMG format with a plate size of 15 mm and plate thickness 06, making it compatible with common turning toolholders used for finishing and semi‑finishing operations. Its application focus on stainless steels and heat‑resistant alloys makes it suitable for medical components, food‑grade parts and aerospace fittings where material toughness and thermal load demand a stable cutting edge. For optimal results, match insert geometry and grade to the workpiece alloy and machining strategy. Contact Metav Werkzeuge to discuss Walter Tools DNMG150608-NFT WSM20S with Tiger·tec Silver coating and to receive tailored advice on toolholding and cutting parameters Technical Data SKU: DNMG150608-NFT-WSM20S-WALTER Article: DNMG150608-NFT WSM20S Type: Indexable turning insert (turning) Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Inscribed circle / plate size: 15 mm Corner radius: 0.8 mm Free angle: 0° (negative) Plate thickness: 06 Special features Coating: Tiger·tec Silver Grade: WSM20S Chipbreaker: NFT Geometry: Rhombic 55° Execution: G Tolerance class: M Material groups: S / M Suitable for: stainless steels (M) FAQ What materials is this insert designed to machine? The DNMG150608-NFT WSM20S insert from Walter Tools is designed primarily for stainless steels and heat‑resistant superalloys, addressing the thermal and adhesion challenges of these materials. How does the NFT chipbreaker improve machining? The NFT chipbreaker on the Walter Tools insert promotes consistent chip segmentation and evacuation, which reduces the risk of chip entanglement and supports steady cutting forces for improved surface quality. What is the significance of a 0° negative rake for this insert? A 0° negative rake increases edge strength and enables more robust cutting under higher mechanical and thermal loads, making the insert suitable for demanding turning of tough alloys. Can this insert be used for finishing and semi‑finishing operations? Yes, the Rhombic 55° form and 0.8 mm corner radius make the insert suitable for finishing and semi‑finishing, offering a compromise between surface finish and edge strength. Is the DNMG150608-NFT WSM20S compatible with standard DNMG toolholders? The insert follows the DNMG designation and typical dimensions (plate size 15, thickness 06), so it fits standard DNMG toolholders when the holder clamping and geometry match the application. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) is part of the Sandvik Group and is a global provider of precision tools for metalworking. Protected trademarks and trade names are the property of their respective owners. Mention of brand names and trademarks is for explanatory purposes only and does not imply any affiliation with or endorsement by the manufacturer. The offered item is an original, brand‑new product from the manufacturer.
DNMG150608-NMS WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver wear resistance, a reliable NMS chipbreaker, and the secured geometry for consistent turning of stainless and heat‑resistant alloys — order the original Walter Tools insert directly via Metav Werkzeuge or consult the specialists for application advice. DNMG150608-NMS WSM01 Drehwendeschneidplatte — rhombic 55°, 0° (negative) clearance, WSM01 grade (Walter Tools) The DNMG150608-NMS WSM01 is a rhombic turning insert designed for secure finishing and medium‑to‑heavy turning of stainless steel and heat‑resistant alloys, supplied in the Tiger‑tec Silver series by Walter Tools Tiger‑tec Silver coating for long tool life Optimised chip control with NMS chipbreaker Specifically for stainless and heat‑resistant alloys Reliable machining of heat‑resistant and stainless materials The WSM01 grade is a coated carbide designed for demanding materials classified under ISO as M (stainless steels) and S (heat‑resistant superalloys and titanium). Compared with generic grades, this specification supports stable cutting edges and reduced tendency for built‑up edge when machining tough, work‑hardening stainless or poorly heat‑conductive superalloys. The result is a more predictable process window, fewer interruptions for re‑grinding and improved batch consistency — a clear efficiency gain for production runs. Consistent chip formation and surface quality Equipped with the NMS chipbreaker, the insert enables controlled chip formation during interrupted or continuous cuts in sticky materials. Controlled chips reduce the risk of tool damage and machine downtime and help maintain a cleaner work area. In practice, the chip geometry supports stable cutting forces and contributes to a superior surface finish, meaning fewer downstream polishing or finishing steps and a more economical overall machining process. Geometry engineered for edge security and repeatability The rhombic 55° shape with a 0.8 mm corner radius and 0° (negative) relief combines modest nose strength with predictable engagement in the cut. This geometry stabilises the cutting edge under thermal and mechanical load and extends effective tool life in applications where thermal shock and adhesion occur. The insert thickness designation and inscribed circle size ensure compatibility with standard DNMG toolholders, giving straightforward integration into existing tool setups. Practical benefits for workshop integration and productivity As part of the Tiger‑tec Silver series, this insert balances wear resistance with general versatility. The coated design improves resistance to abrasive wear and edge breakdown, so the insert maintains dimensional stability over longer cycles. For production managers and process engineers, this translates into higher uptime, fewer tool changes and a predictable quality level — advantages that support lean manufacturing and cost‑effective batch processing. For machining operations requiring secure performance in stainless and heat‑resistant alloys, contact Metav Werkzeuge to specify the correct Walter Tools insert and ensure genuine parts and application support; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DNMG150608-NMS-WSM01-WALTER Designation: DNMG150608-NMS WSM01 Series: Tiger‑tec Silver Grade: WSM01 Chipbreaker: NMS Facts Corner radius: 0.8 mm Relief angle: 0° (negative) Inscribed circle size: 15 mm Thickness designation: 06 Tolerance class: M Design and features Coated carbide grade Rhombic 55° geometry Suitable for stainless steel (M) Suitable for heat‑resistant superalloys/titanium (S) Stable cutting edge and controlled chip formation FAQ What materials is this insert intended for? The DNMG150608‑NMS WSM01 from Walter Tools is specified for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering coatings and geometry to handle adhesion and thermal loads. How does the NMS chipbreaker improve machining? The NMS chipbreaker on the insert promotes controlled chip breaking and evacuation, which reduces built‑up edge formation and helps preserve cutting‑edge integrity during turning of sticky or heat‑sensitive materials. Which geometric features influence tool life and surface finish? The rhombic 55° shape, 0° (negative) relief and 0.8 mm corner radius provide a balance of nose strength and cutting stability, supporting repeatable surface quality and longer effective tool life. Is the insert compatible with standard DNMG toolholders? The designation DNMG150608 indicates the standard DNMG format; the insert fits conventional DNMG toolholders that accept that geometry and size. What performance advantages does the Tiger‑tec Silver series offer? Tiger‑tec Silver coating enhances wear resistance and edge stability under thermal stress, resulting in improved process security and more consistent results across production batches. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) information and statements above refer to original factory‑new goods of the named manufacturer. Protected trademarks and trade names are the property of their respective owners and are mentioned for clarification only; there is no affiliation implied between Metav Werkzeuge and the trademark owners.
DNMG150608-NMS WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of a proven combination of Tiger·tec Silver coating and the WSM10S grade for secure chip control and extended edge life; the result is a stable production process with consistent surface quality. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. DNMG150608-NMS WSM10S indexable turning insert — Tiger·tec Silver, for stainless steels and heat-resistant alloys (Walter Tools) A robust indexable turning insert DNMG150608-NMS WSM10S designed for demanding turning of stainless steels and heat-resistant superalloys, offering enhanced edge stability and controlled chip formation Tiger·tec Silver coating for edge stability Optimised NMS chipbreaker for secure chip control Rhombic 55° shape for versatile turning 0.8 mm corner radius for consistent finish High-performance cutting in hard-to-machine materials The grade WSM10S, paired with the Tiger·tec Silver coating, is engineered for machining stainless steels and heat-resistant alloys where temperature and adhesion challenge tool life. This combination supports stable chip formation and improved wear resistance, reducing the frequency of index changes during long production runs. The insert’s coating technology promotes consistent cutting-edge behaviour under elevated cutting temperatures, which translates into fewer interruptions and more predictable tool consumption in industrial turning applications. The insert designation, DNMG150608-NMS WSM10S, signals a coated cemented carbide solution optimised for tough workpiece materials. Stable edge and repeatable surface quality for production turning The rhombic 55° geometry with a corner radius of 0.8 mm and a negative rake of 0° increases edge strength and supports heavier depths of cut while maintaining dimensional stability. A negative free angle improves robustness at the cutting edge, which is particularly useful when facing interrupted cuts or materials prone to built-up edge. As a result, operators achieve a reliable surface finish with reduced risk of edge failure. The built-in NMS chipbreaker is tuned for secure chip control in demanding feeds, helping to keep the machining environment clean and the process predictable. Compatibility, handling and process benefits The insert is supplied in the DNMG150608-NMS form factor with thickness class 06 and tolerance class M, enabling straightforward mounting in standard toolholders for indexable turning. Classified for material groups S / M, the insert covers heat-resistant superalloys, titanium and stainless steels, allowing fewer grade changes across mixed production batches. The balanced design of geometry and chipbreaker decreases downtime for tool changes and supports higher machine utilisation. For application questions or to verify suitability for a specific machining task, Metav Werkzeuge provides technical support by email and phone; practical advice can help match cutting data and holder choice to the intended operation. Contact Metav Werkzeuge for tailored machining recommendations and to source Walter Tools Tiger·tec Silver inserts for challenging stainless steel or superalloy turning Technical data SKU: DNMG150608-NMS-WSM10S-WALTER Article designation: DNMG150608-NMS Full designation: DNMG150608-NMS WSM10S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM10S Numerical data Corner radius: 0.8 mm Free angle: 0° (negative) Insert form: Rhombic 55° Insert size: 15 Insert thickness: 06 Tolerance class: M Materials & special features Coating: Tiger·tec Silver Chipbreaker: NMS Material classification: S / M Suitable for: stainless steels; heat‑resistant superalloys and titanium (ISO groups S, M) Application: demanding and heavy‑duty turning operations FAQ Which materials is this insert intended for? The DNMG150608-NMS WSM10S indexable turning insert from Walter Tools is specified for stainless steels (ISO group M) and heat-resistant superalloys/titanium (ISO group S), reflecting the grade’s focus on thermal and edge-stability performance. How does the geometry improve surface finish? The rhombic 55° form with a 0.8 mm corner radius provides a stable cutting edge that reduces vibration and scatter during turning, so the insert delivers a repeatable surface finish even under heavier cuts. What advantages does Tiger·tec Silver offer? Tiger·tec Silver coating on the WSM10S grade enhances resistance to abrasive and adhesive wear, improving edge retention and enabling longer tool intervals in tough materials. Is a negative rake suitable for interrupted or heavy cuts? Yes, the negative free angle (0° negative) increases cutting-edge robustness, which is beneficial for interrupted machining and heavier depth-of-cut scenarios where edge strength is critical. When is the NMS chipbreaker recommended? The NMS chipbreaker is optimised for secure chip control when machining ductile, work-hardening materials like stainless steels and for coping with the thermal loads typical of superalloy turning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for clarification purposes only; there is no affiliation or endorsement implied between Metav Werkzeuge and the trademark holders. The offered article is an original, factory‑new product of the manufacturer.
DNMG150608-NMS WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger·tec Silver coating, a stable negative geometry and a precise Rhombus 55° form to ensure consistent machining of stainless steels and heat‑resistant alloys; for efficient production with reliable tool life, order the insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150608-NMS WSM20S indexable turning insert — Tiger·tec Silver, for stainless steels and superalloys (Walter Tools) The DNMG150608-NMS WSM20S is an indexable turning insert engineered for heavy-duty applications, offering a coated carbide grade optimised for machining stainless steels and heat‑resistant superalloys. Tiger·tec Silver coated grade WSM20S Optimised for stainless steel and superalloys Rhombus 55° plate with 0.8 mm corner radius Negative 0° rake, NMS chipbreaker Higher process stability when machining demanding alloys The Tiger·tec Silver grade WSM20S combines a coated carbide substrate with a robust surface layer to resist heat and abrasion, which improves tool life when working with materials that generate high cutting temperatures. In practice, this means fewer tool changes and more predictable machining cycles when producing components from stainless steels (ISO group M) or nickel‑based superalloys (ISO group S). The enhanced resistance to built‑up edge and a focus on stable chip formation reduce rework and support repeatable production quality, delivering tangible efficiency gains on the shop floor. Geometry that balances strength and surface quality The Rhombus 55° shape paired with a 0° (negative) rake provides mechanical strength at the cutting edge while the 0.8 mm corner radius helps maintain a durable cutting line under interrupted or heavy cuts. The integrated NMS chipbreaker is designed to control chip form for the target material groups, improving evacuation and reducing the risk of workpiece damage or tool interference. For operations requiring robust performance rather than delicate finishing, this combination supports consistent dimensional accuracy and a dependable surface result with each indexation. Practical integration and productivity benefits With a tolerance class M and the DNMG geometry family, the insert fits common indexable turning toolholders, enabling quick changeovers and straightforward inventory management. The plate size and thickness (designation as DNMG150608) match standard toolbody interfaces, making the grade WSM20S a practical upgrade for shops seeking to extend uptime and lower per‑part tooling cost. The result is a measurable improvement in throughput for components made from corrosion‑resistant steels and heat‑resistant alloys, while retaining sufficient edge stability for occasional finishing passes. Contact Metav Werkzeuge for expert advice on toolholder pairing and to procure the Walter Tools DNMG150608-NMS WSM20S insert for enhanced machining of stainless steels and superalloys Technical data Article number: DNMG150608-NMS-WSM20S-WALTER Designation: DNMG150608-NMS WSM20S Brand: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Shape: Rhombus 55° Numbers / Core technical data Size: 15 Thickness: 06 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Special features / Versions Chipbreaker: NMS Coating technology: Tiger·tec Silver (coated carbide) Material suitability: S / M Typical application: machining of stainless steels (ISO M) and superalloys (ISO S) Execution: G (negative geometry) FAQ Which materials is this insert suitable for? The DNMG150608‑NMS WSM20S insert from Walter Tools is intended for stainless steels (ISO group M) and heat‑resistant superalloys or titanium‑based alloys (ISO group S), where heat resistance and edge stability are required. How does the NMS chipbreaker affect machining? The NMS chipbreaker on the WSM20S grade controls chip shape and evacuation for demanding materials, supporting consistent chip flow, reduced surface damage and improved process reliability during medium to heavy cuts. Is the insert better for roughing or finishing? With its negative 0° rake and 0.8 mm corner radius, the insert is optimised for robust cutting and stability—making it particularly suitable for roughing and semi‑finishing; it can perform light finishing passes depending on cutting data and toolholder rigidity. Will this fit standard DNMG toolholders? Yes; the DNMG150608 form is compatible with common indexable turning toolholders designed for DNMG inserts, enabling quick replacement and straightforward integration into existing tooling systems. What advantages does the Tiger·tec Silver coating provide? Tiger·tec Silver increases wear resistance and thermal stability, which helps to reduce built‑up edge and extend tool life when machining difficult‑to‑cut alloys; the WSM20S grade leverages this coating for consistent performance. Die Walter AG (marketed as Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names belong to their respective owners. Brand names are used for explanation only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
DNMG150608-NMS WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of the combination of stable cutting-edge performance, Tiger·tec Silver coating and optimised chip control for reliable turning of stainless steels and heat‑resistant superalloys; order the insert directly via Metav Werkzeuge or consult our technical team for application advice. DNMG150608-NMS WSM30S indexable turning insert — Tiger·tec Silver, for stainless steel and superalloys | Walter Tools The DNMG150608-NMS WSM30S is an indexable turning insert designed for secure, high‑temperature machining of stainless steel and heat‑resistant superalloys, combining a robust coated carbide grade with a chipbreaker geometry that stabilises the cut. DNMG geometry, 0.8 mm corner radius Tiger·tec Silver coated carbide grade WSM30S Optimised chip control for stainless steel Negative 0° rake for stable cutting Reliable thermal and edge stability for demanding materials The Tiger·tec Silver coating together with the WSM30S grade provides a combination of wear resistance and heat tolerance that reduces the risk of built‑up edge when machining tough alloys. This coated carbide formulation is engineered to preserve a stable cutting edge, which means fewer interruptions for tool changes and more predictable production cycles. For users less familiar with coatings: the surface layer decreases friction and thermal load at the cutting zone, so the tool maintains cutting geometry longer and delivers consistent component surfaces. Geometry and chip control that improve surface quality The rhombic 55° shape and the 0.8 mm corner radius optimise cutting mechanics for finishing and semi‑finishing passes; the NMS chipbreaker directs chips away from the workpiece and toolholder, reducing recutting and heat concentration. The negative 0° rake contributes to edge strength under high loads, which is especially beneficial when turning materials that are prone to work hardening. As a result, operators obtain superior surface finishes with lower risk of chatter, and set‑up times are shortened thanks to predictable chip behaviour. Consistent productivity and lower operational costs By combining a proven coating technology and a geometry suited for stainless steel and superalloys, the insert achieves longer effective life and steadier cutting forces. This leads to fewer tool changes, reduced machine idle time and a better cost‑per‑component outcome. The grade and chipbreaker are selected to give balanced wear patterns rather than rapid edge degradation; therefore, process parameters can be stabilised across batches, supporting repeatable quality and higher throughput in routine production. For machining applications requiring durable, heat‑resistant performance select the Walter Tools Tiger·tec Silver DNMG150608‑NMS WSM30S and contact Metav Werkzeuge for tailored cutting data and application support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: DNMG150608-NMS-WSM30S-WALTER Article name: DNMG150608-NMS WSM30S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM30S Geometry: Rhombus 55° Chipbreaker: NMS Rake angle: 0° (negative) Corner radius: 0.8 mm Insert size: 15 Thickness: 06 Tolerance class: M Applicable material groups: S / M Facts / Core technical data Corner radius: 0.8 mm Inscribed circle: 15 mm Thickness designation: 06 Rake angle: 0° (negative) Tolerance: M SKU: DNMG150608-NMS-WSM30S-WALTER Special features / Versions Coating: Tiger·tec Silver Substrate: Coated carbide Intended materials: stainless steel, heat‑resistant superalloys and titanium (depending on geometry) Application focus: secure chip control and stable cutting edge Typical use: finishing and semi‑finishing turning operations FAQ What materials is this insert suitable for? The DNMG150608‑NMS WSM30S insert is specified for stainless steel (ISO group M) and for heat‑resistant superalloys/titanium (ISO group S), where its coating and geometry support stable cutting at elevated temperatures. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating improves thermal resistance and reduces friction; this helps the WSM30S grade keep a sharp, stable cutting edge and lowers the tendency for built‑up edge during prolonged operation. What does the NMS chipbreaker achieve in practice? The NMS chipbreaker creates short, controllable chips that evacuate reliably from the cutting zone, which decreases recutting and helps maintain surface quality and tool life. Is the negative 0° rake suitable for interrupted cuts? Yes, the negative 0° rake increases edge strength and robustness, making this insert suitable for applications with higher mechanical load or light interruption where a stable cutting edge is required. Can this insert be indexed to present a new cutting edge? The DNMG insert is indexable; after one cutting edge reaches its wear limit, rotating the insert presents a fresh edge and restores original cutting geometry, which supports economical tool usage. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory‑new goods of the manufacturer (Walter Tools).
DNMG150608-NMT WS10 WS10 Wendeplatten - Walter Tools
Take advantage of the combination of the WS10 coated carbide grade and the NMT chipbreaker for consistent edge stability and predictable chip formation; the rhombic 55° geometry with a 0.8 corner radius further supports reliable surface finish. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. DNMG150608-NMT WS10 – Indexable Turning Insert, Rhombic 55° by Walter Tools The DNMG150608-NMT WS10 is a rhombic 55° indexable turning insert designed for versatile turning tasks where a coated carbide grade and a controlled chipbreaker deliver process stability and repeatable results Coated carbide grade WS10 Rhombic 55° geometry 0.8 mm corner radius Negative 0° clearance angle NMT chipbreaker design Stable cutting edges for repeatable finishes The insert combines a coated carbide WS10 grade with a rhombic 55° form to deliver a balance of wear resistance and versatility. The moderate corner radius (0.8 mm) supports edge robustness, reducing the risk of premature chipping during interrupted cuts and long-run production. Using a coated grade means improved thermal and abrasive resistance compared with uncoated grades, which translates into longer periods between index changes and more consistent surface quality on turned components. Predictable chip control and process reliability Built with the NMT chipbreaker, the tool is engineered to break and evacuate chips reliably across common turning regimes. The 0° negative clearance supports stable cutting forces and helps maintain tool geometry under varying depths of cut. This combination reduces downtime caused by poor chip evacuation and supports higher repeatability in cycle times, making the insert suitable for production environments that prioritise efficiency and predictable throughput. Practical handling and selection guidance The insert is supplied in the standard DNMG format and is available in the Walter Tools series described as Walter Schneidstoffsorte - Serie offen. The grade and series designation indicate a coated hardmetal construction; therefore, material suitability should be confirmed against the manufacturer's product matrix for best results. For component-specific advice and recommended cutting parameters, the catalogue matrix or Metav Werkzeuge consultants can provide targeted guidance to match the insert to the workpiece material and machining conditions. Contact Metav Werkzeuge for tailored process recommendations on the Walter Tools DNMG150608-NMT WS10 insert and secure reliable performance in turning operations Technical Data Article number: DNMG150608-NMT-WS10-WALTER Description: DNMG150608-NMT WS10 Product type: Drehwendeschneidplatte (indexable turning insert) Brand: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts Inscribed circle: 15 Thickness code: 06 Corner radius: 0.8 Clearance angle: 0° (negativ) Tolerance class: M Special features Chipbreaker: NMT Grade: WS10 (coated carbide) Execution code: G Material designation: Katalogabhängig Form: Rhombus 55° FAQ What materials is the insert suitable for? Material suitability is defined in the manufacturer's matrix; the DNMG150608-NMT WS10 is a coated carbide grade and material compatibility should be checked in the Walter Tools product matrix or with Metav Werkzeuge consultants How does the NMT chipbreaker affect production? The NMT chipbreaker is designed for controlled chip formation and evacuation, which improves process reliability and reduces the likelihood of chip-related interruptions when using the DNMG150608-NMT WS10 insert What does the 0° negative clearance mean for cutting forces? A 0° (negative) clearance tends to produce stable cutting forces and helps preserve the insert geometry under varied cutting conditions, supporting consistent tool behaviour for this Walter Tools insert Is the DNMG150608-NMT WS10 suitable for interrupted cuts? The 0.8 corner radius and coated grade contribute to edge strength, making the insert a good option for applications with moderate interruption, subject to confirmation against the Walter Tools application matrix Where to get recommended cutting parameters? Recommended speeds, feeds and depth of cut for the DNMG150608-NMT WS10 are available from the Walter Tools technical documentation; Metav Werkzeuge can assist with parameter selection for specific machines and materials Die Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
DNMG150608-NMT WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating performance, a robust rhombic 55° geometry and WSM20S grade toughness for secure chip control in demanding stainless and heat‑resistant alloy machining. Order directly via Metav Werkzeuge or contact the technical team for application advice. DNMG150608-NMT WSM20S indexable turning insert — Tiger·tec Silver grade, for stainless steels and superalloys | Walter Tools The DNMG150608-NMT WSM20S is a rhombic 55° indexable turning insert designed for heavy‑duty and continuous turning of stainless steels and heat‑resistant superalloys, offering stable cutting performance and extended tool life. Tiger·tec Silver coating For stainless steels and superalloys Rhombic 55° insert geometry 0° negative rake, 0.8 mm corner radius Reliable performance where heat and toughness matter The WSM20S grade within the Tiger·tec Silver family is tailored for materials classified under ISO groups M and S, combining a coated‑carbide microstructure with a surface treatment that improves heat resistance and wear behaviour. This results in stable chip formation and a reduced tendency for built‑up edge when machining workhardening stainless steels and nickel‑based alloys. Engineers looking for predictable tool life will appreciate the controlled flank wear progression provided by the grade, which helps maintain component tolerances and reduces unplanned tool changes. Geometry engineered for chip control and surface finish The rhombic 55° geometry paired with a 0.8 mm corner radius balances strength and accessibility, allowing productive finishing and semi‑finishing passes on complex contours. The 0° negative rake (negative freedom angle) increases edge robustness, making the insert suitable for interrupted cuts and heavier depths of cut while still delivering acceptable surface quality. Where a fine surface is required, the combination of corner radius and cutting edge preparation supports consistent results without excessive vibration. Coating and edge technology for longer intervals between changes The insert’s Tiger·tec Silver coating provides thermal shielding and improved hardness at elevated temperatures, which is especially beneficial when cutting alloys that generate large amounts of heat at the cutting edge. The NMT chipbreaker geometry is designed to control chip flow and breakage in the specified material groups, lowering the risk of rework or machine downtime. For production environments, this means fewer tool indexings and more parts per tool life, boosting overall process efficiency. Practical integration and recommended applications This insert is supplied in the DNMG form factor and fits standard DNMG toolholders; compatibility should be checked against existing clamping systems before use. The grade is recommended for continuous turning and medium‑to‑heavy operations in stainless steel and heat‑resistant alloys; adjustments to feeds and speeds are advised to account for workpiece hardness and part geometry. The tolerance class M indicates consistent dimensional accuracy for reliable seat fit and repeatable performance across indexings. Contact Metav Werkzeuge today to discuss the application of the Tiger·tec Silver WSM20S insert, request tailored cutting data or confirm availability for specific production demands. Technical data Article number: DNMG150608-NMT-WSM20S-WALTER Designation: DNMG150608-NMT WSM20S Brand: Walter Tools Series: Tiger·tec Silver Core data Size: 15 Thickness: 06 Corner radius: 0.8 mm Freedom angle: 0° (negative) Tolerance class: M Special features Chipbreaker: NMT Grade: WSM20S (coated carbide) Geometry: Rhombus 55° Material application: S / M (stainless steels, heat‑resistant alloys) FAQ What materials is this insert best suited for? The DNMG150608-NMT WSM20S insert is engineered for ISO groups M and S, specifically stainless steels and heat‑resistant superalloys where thermal stability and edge strength are critical. How does the NMT chipbreaker affect machining? The NMT chipbreaker on the WSM20S grade promotes predictable chip control and compact chip forms in the intended material groups, supporting continuous production and reducing the risk of entanglement. Is the insert compatible with standard DNMG toolholders? Yes, the DNMG150608-NMT format is compatible with holders designed for DNMG inserts; however, correct clamping and seat condition should be verified before production use. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating enhances thermal resistance and wear performance, extending tool life under elevated cutting temperatures typical when machining stainless steels and superalloys. What cutting-edge conditions are recommended for initial tests? Start with moderate feeds and conservative cutting speeds for the DNMG150608-NMT WSM20S and adjust based on observed tool wear and surface finish to find the optimal balance between productivity and tool life. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanatory purposes; there is no affiliation between our company and the named brands. The offered item is original, factory‑new goods from the manufacturer.
DNMG150608-NRS WMP20S WMP20S Wendeplatten - Walter Tools
The combination of the Tiger‑tec Silver coating and the WMP20S carbide grade delivers reliable chip control and long tool life for rostfreier Stahl turning; benefit from stable cutting with a rhombic 55° geometry and a 0° negative rake. Order the insert directly via Metav Werkzeuge or consult our application specialists for tailored recommendations. DNMG150608‑NRS WMP20S indexable turning insert — for rostfreier Stahl, Tiger‑tec Silver, Walter Tools The DNMG150608‑NRS WMP20S is a rhombic 55° indexable turning insert engineered for medium to robust machining of rostfreier Stahl, offering controlled chip formation and enhanced edge stability. Tiger‑tec Silver coated carbide grade For rostfreier Stahl (ISO M) machining Rhombic 55° form with 0.8 mm corner radius 0° negative rake for stable cutting High process reliability when machining rostfreier Stahl The coated WMP20S grade, part of the Tiger‑tec Silver series, is designed specifically for the challenges of machining rostfreier Stahl. The combination of a modern PVD/CVD-style coating and a wear-resistant carbide substrate improves temperature resistance and reduces built-up edge formation, which results in fewer interruptions and a steadier surface finish. This tailored material pairing enables a predictable tool life under medium to demanding cutting conditions and reduces the frequency of insert changes in serial production. Predictable chip control and extended edge life The NRS chipbreaker is matched to the insert geometry to promote short, manageable chips when turning tough, adhesive materials. Stable chip formation reduces toolface adhesion and lowers the risk of damage to the cutting edge, which in turn maintains dimensional accuracy over longer cycles. By favouring consistent chip evacuation, workshops can achieve improved cycle times and reduced rework—an advantage for repetitive turning operations where repeatability is crucial. Geometry engineered for stability and accessibility The rhombic 55° form provides a versatile cutting angle that balances approachability in confined toolposts with a robust cutting edge capable of handling interrupted cuts. The 0.8 mm corner radius supports a stronger edge profile for heavier feed applications while preserving surface quality. The 0° (negative) rake contributes to a durable cutting geometry that resists chipping under higher radial loads, making this insert suitable for turning tasks that demand both strength and reliability. Practical application and toolholder compatibility Marked as DNMG150608‑NRS, the insert follows common ISO sizing for straightforward integration into existing toolholders and turret systems. The thickness code and size enable stable clamping and repeatable indexability. As a product from Walter Tools, this insert suits production environments that prioritise continuous throughput and consistent component tolerances, particularly where rostfreier Stahl properties—like toughness and heat sensitivity—require a specialised cutting solution. For high process security in rostfreier Stahl turning, contact Metav Werkzeuge to discuss the Walter Tools DNMG150608‑NRS WMP20S insert and request specific machining recommendations via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: DNMG150608-NRS-WMP20S-WALTER ISO designation: DNMG150608-NRS WMP20S Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Insert size: 15 Thickness code: 06 Relief/rake angle: 0° (negative) Tolerance class: M Special features Coating technology: Tiger‑tec Silver Carbide grade: WMP20S Chipbreaker: NRS Insert form: Rhombus 55° Suitable for: rostfreier Stahl (ISO M) Execution code: G FAQ What materials is this insert suitable for? The DNMG150608‑NRS WMP20S is specified for machining rostfreier Stahl (ISO M) and performs reliably under medium to robust cutting conditions. How does the Tiger‑tec Silver coating benefit cutting performance? The Tiger‑tec Silver coating on the WMP20S grade increases temperature resistance and reduces adhesion, which helps to stabilise the cutting edge and extend the insert's operational life. Is the insert compatible with standard DNMG toolholders? Yes, the DNMG150608‑NRS form follows ISO DNMG sizing and fits standard DNMG toolholders designed for rhombic 55° inserts. What cutting conditions suit the 0° negative rake geometry? A 0° negative rake provides a robust cutting edge for higher radial loads and interrupted cuts, making the insert suitable for demanding turning operations where edge strength is essential. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150608-NRS WSM10S WSM10S Wendeplatten - Walter Tools
The combination of a Tiger·tec Silver coated grade and a robust NRS chipbreaker provides secure chip formation and extended edge life in demanding turning tasks; with a rhombic 55° geometry and a 0.8 mm corner radius, stable machining of stainless steels and heat‑resistant alloys is achievable. Order directly via Metav Werkzeuge or consult the team for application-specific cutting data. DNMG150608-NRS WSM10S indexable turning insert – Tiger·tec Silver, negative 0° (Walter Tools) The DNMG150608-NRS WSM10S is an indexable turning insert engineered for reliable machining of stainless steels and heat‑resistant superalloys in finishing and medium‑to‑heavy roughing operations. Tiger·tec Silver coated carbide grade Optimised for stainless steels and superalloys Rhombic 55° insert with 0.8 mm corner radius Negative 0° rake with NRS chipbreaker High‑temperature stability and material suitability for consistent productivity The combination of the WSM10S grade and Tiger·tec Silver coating targets cutting tasks where heat generation and work‑hardening are critical factors. As a coated carbide solution, this insert supports secure cutting edge behaviour when machining stainless steels and superalloys, reducing tendencies to build up material on the edge and enabling longer effective tool life. This results in fewer interruptions for index changes and a steadier production rhythm for components subject to thermal and mechanical stress. Geometry and chip control that improve surface quality and process security The rhombic 55° shape with a 0.8 mm corner radius provides a balanced contact area for stable turning and improved edge strength, particularly useful when interrupted cuts or variable depths of cut occur. The negative 0° rake increases cutting edge robustness while the NRS chipbreaker is designed to promote predictable chip formation, aiding swarf evacuation and preventing entanglement in turning operations. Together these features support a reliable surface finish and minimise vibration-related deviations. Practical advantages for workshop efficiency and repeatability Using a standardised insert family simplifies tool inventory and reduces changeover complexity. The insert’s design emphasises durability and repeatable performance, contributing to measurable gains in throughput and lower tooling consumption over time. Where component tolerances and reproducibility matter, this cutting solution helps maintain consistent part quality while offering the economic benefit of fewer index changes and longer intervals between regrinds. Application guidance and process integration This insert is suited to a range of turning tasks on tough-to-cut materials classified under ISO groups M and S. Selection of cutting parameters should reflect the alloyed nature of the workpiece and machine rigidity; the WSM10S sort supports higher thermal loads and preserves a robust cutting edge under demanding conditions. For best results, pair the insert with appropriate toolholder geometry matched to the rhombic 55° form and verify fixturing to exploit the insert’s chip control and edge stability. Contact Metav Werkzeuge for tailored recommendations on using this Walter Tools Tiger·tec Silver insert in specific applications or to request cutting data optimised for individual materials and machines. Technical data Article number: DNMG150608-NRS-WSM10S-WALTER Description: DNMG150608-NRS WSM10S indexable turning insert Manufacturer: Walter Tools Facts Insert form: Rhombus 55° Corner radius: 0.8 mm Clearance / rake: 0° (negative) Size designation: 15 Thickness code: 06 Tolerance class: M Special features Grade family: Tiger·tec Silver Grade / sort: WSM10S Chipbreaker: NRS Material grouping: S / M (suitable for heat‑resistant superalloys/titanium and stainless steels) FAQ What materials is this insert designed for? The DNMG150608-NRS WSM10S insert from Walter Tools is designed primarily for stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), offering thermal stability and stable chip control. How does the rhombic 55° geometry affect cutting? A rhombic 55° form gives controlled engagement and flexible approach angles; with the DNMG150608-NRS WSM10S this supports improved edge life and surface quality under varying cutting conditions. What is the purpose of the NRS chipbreaker? The NRS chipbreaker on this insert promotes predictable chip formation, helping to evacuate chips reliably and reduce the risk of entanglement or surface damage during turning. Is the insert suitable for interrupted cuts? Yes, the combination of a negative 0° rake and a 0.8 mm corner radius provides a more robust cutting edge, making the insert appropriate for applications involving interruptions or variable depths of cut. Can this insert be used for finishing and roughing? The DNMG150608-NRS WSM10S is versatile: its geometry and grade balance edge strength and thermal resistance, enabling both medium roughing and finishing tasks depending on cutting data and toolholder selection. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanation and comparison. There is no affiliation between Metav Werkzeuge and the manufacturers named. The offered item is an original, factory‑new product of the manufacturer.
DNMG150608-NRS WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of robust cutting geometry, Tiger·tec Silver coating and reliable chip control for consistent productivity in machining rostfreier Stahl and high-temperature alloys; order directly via Metav Werkzeuge or request advice from our consultants. DNMG150608-NRS WSM20S Drehwendeschneidplatte – Tiger·tec Silver, for rostfreier Stahl (Walter Tools) DNMG150608-NRS WSM20S is a rhombic 55° indexable turning insert designed for demanding turning operations on rostfreier Stahl and heat-resistant superalloys *Tiger·tec Silver coating for thermal stability *NRS chipbreaker for controlled chips *Rhombic 55° form for versatile turning *Corner radius 0.8 mm for edge strength High thermal stability for heavy-duty turning The insert combines the WSM20S grade with the Tiger·tec Silver coating to deliver higher heat resistance and improved cutting-edge life when machining demanding alloys. Coating technology reduces thermal load on the cutting edge and helps maintain dimensional stability under continuous cutting. This leads to more predictable tool life and fewer interruptions for tool change, which supports a smoother production flow and reduced overall machining costs. Geometry engineered for stable cutting and chip control A rhombic 55° profile and a negative 0° rake produce a strong cutting edge that resists chipping during interrupted cuts and heavy engagement. The integrated NRS chipbreaker promotes short, stable chips when processing sticky, work-hardening materials, improving surface finish and machine safety. The 0.8 mm corner radius increases edge robustness and reduces the risk of premature flank wear, which is particularly valuable on long production runs. Suitability for rostfreier Stahl and high-temperature alloys The grade is certified for ISO material groups M and S, meaning it is optimised for rostfreier Stahl as well as heat-resistant superalloys and titanium. These materials tend to generate high temperatures and adverse chip behaviour; the grade’s balanced microstructure and coating address these challenges by supporting consistent chip formation and a stable cutting edge. As a result, machining processes become more reliable and repeatable across batches. Practical benefits for process reliability Tolerance class M and the standard insert dimensions (inscribed circle 15, thickness 06) make the insert compatible with common toolholders and replacement cycles, helping to simplify inventory management. The combination of grade, coating and geometry reduces the frequency of rework and supports a higher first-pass yield. For shops aiming to increase throughput on rostfreier Stahl components, the insert offers measurable gains in tool life and surface quality without compromising process security. Guidance and support for specification choices For questions about selecting the correct insert geometry or optimising cutting data for specific rostfreier Stahl grades or superalloys, technical consultation is available. Technical experts can advise on adapting speeds, feeds and coolant strategies to exploit the Tiger·tec Silver advantages and the NRS chipbreaking design for the best balance of productivity and tool life. Contact details are provided for direct enquiries and tailored recommendations. Contact Metav Werkzeuge for expert advice on Walter Tools Tiger·tec Silver inserts and to arrange rapid supply or customised cutting-data support Technical Data Article number: DNMG150608-NRS-WSM20S-WALTER Designation: DNMG150608-NRS WSM20S Brand: Walter Tools Product type: Drehwendeschneidplatte Series: Tiger-tec Silver Grade: WSM20S Facts Corner radius: 0.8 mm Free angle: 0° (negative) Plate form: Rhombus 55° Plate size: 15 Plate thickness: 06 Tolerance class: M Special features Coating: Tiger·tec Silver Chipbreaker: NRS Material suitability: S / M Application: rostfreier Stahl and heat-resistant superalloys Execution: G FAQ What materials is this insert best suited for? The DNMG150608-NRS WSM20S insert is designed for rostfreier Stahl (ISO group M) and heat-resistant superalloys or titanium (ISO group S), offering stable chip formation and heat resistance. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on this Walter Tools grade improves thermal stability and wear resistance, which prolongs effective cutting life under elevated cutting temperatures. What advantage does the NRS chipbreaker provide? The NRS chipbreaker is engineered to produce controlled, short chips in sticky or work-hardening materials, enhancing surface finish and reducing the risk of entangling long chips. Is the negative 0° rake suitable for interrupted cuts? Yes, the negative 0° free angle increases cutting-edge strength, making the insert more tolerant of interrupted cuts and heavy radial engagement. Which insert geometry should be matched with this plate? Use holders compatible with a rhombic 55° insert form and the specified plate size and thickness; this ensures secure clamping and correct cutting-geometry alignment for process reliability. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is an original factory-new item from the manufacturer. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com