DNMG150612-MP3 WPP20G Wendeplatten - Walter Tools
The combination of a wear‑resistant Tiger‑tec Gold grade and the MP3 chipbreaker ensures longer tool life and predictable chips for robust turning of steel; order the insert through Metav Werkzeuge or contact the consultants for process recommendations. DNMG150612-MP3 WPP20G – Indexable turning insert (Tiger‑tec Gold) for steel, Walter Tools The DNMG150612-MP3 WPP20G is an indexable turning insert intended for general steel machining (ISO P), combining a Tiger‑tec Gold coated carbide grade with an MP3 chipbreaker to deliver reliable chip control and consistent surface quality. Tiger‑tec Gold coating for extended tool life MP3 chipbreaker for consistent chip control Rhombic 55° form with 1.2 mm nose radius Negative 0° rake for robust turning performance Greater lifetime and predictable economy with Tiger‑tec Gold The coated carbide grade delivers markedly improved wear resistance, which translates into longer edge life and fewer indexings in batch production. The WPP20G grade, developed within the Tiger‑tec Gold series, balances hardness and toughness to maintain a stable cutting edge under the typical heat and chip formation of steel machining. For production environments the result is a lower cost per part and reduced downtime, achieved through fewer insert changes and more consistent dimensional results from the cutting edge. Controlled chip formation for secure, repeatable turning The integrated MP3 chipbreaker is tuned to produce short, manageable chips when machining steel, reducing the risk of entanglement and making coolant evacuation more effective. Combined with the rhombic 55° geometry and a 1.2 mm nose radius, the insert offers a reliable compromise between surface finish and cutting strength: the geometry supports smooth finishes on finishing passes while the radius helps withstand intermittent cuts, improving process security in mixed production runs. Practical application and process guidance for ISO P materials Designed explicitly for the ISO P group, this insert suits unalloyed and alloyed steel applications where a universal cutting grade is required. The 0° negative rake increases edge robustness for steady chip removal under heavy depths of cut, making the insert suitable for turning tasks that demand repeatable performance. The medium tolerance class supports standard toolholder systems and simplifies inventory by using a widely compatible insert type suitable for diverse turning operations. For reliable steel turning with Walter Tools’ Tiger‑tec Gold inserts, contact Metav Werkzeuge for tailored advice and fast processing via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DNMG150612-MP3-WPP20G-WALTER Designation: DNMG150612-MP3 WPP20G Product type: Indexable turning insert / Turning insert Manufacturer: Walter Tools Grade: WPP20G Series: Tiger‑tec Gold Chipbreaker: MP3 Core data Size: 15 mm Nose radius: 1.2 mm Thickness code: 06 Relief angle: 0° (negative) Tolerance class: M Special features Tiger‑tec Gold coating technology MP3 chipbreaker for predictable chips Rhombic 55° insert form Grade suited for steel (ISO P) Execution: G FAQ What materials is this insert designed for? The DNMG150612-MP3 WPP20G insert is designed for ISO P materials, specifically unalloyed and alloyed steel, where the WPP20G grade is optimised for the heat and chip behaviour of steel. How does the Tiger‑tec Gold grade benefit production? Tiger‑tec Gold in the WPP20G grade provides improved wear resistance and a balanced edge toughness, so the insert maintains cutting performance longer and reduces the frequency of tool changes. What advantage does the MP3 chipbreaker offer? The MP3 chipbreaker produces short, controllable chips and helps maintain a stable cutting process, which supports safer machining and easier handling during automated or manual operations. Is the insert suitable for finishing passes? With a 1.2 mm nose radius and rhombic 55° geometry, the insert can achieve good surface finishes on finishing passes while still offering strength for semi‑finishing operations. Which toolholders are compatible with this insert designation? The DNMG150612-MP3 format corresponds to common DNMG toolholders for 15 mm insert systems; holders designed for rhombic 55° DNMG inserts will accept this grade and chipbreaker. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Walter Tools: Die Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the brands mentioned. The offered item is an original, brand‑new product of the manufacturer.
DNMG150612-MP5 WPP05G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WPP05G grade to secure consistent chip control and extended tool life in steel machining; order directly via Metav Werkzeuge or consult our specialists for application-specific parameters. DNMG150612-MP5 WPP05G — Indexable turning insert, Tiger·tec Gold for steel (Walter Tools) The DNMG150612-MP5 WPP05G is an indexable turning insert optimised for steel machining, offering a coated carbide grade and an MP5 chipbreaker for stable chip control. Tiger·tec Gold coated WPP05G grade MP5 chipbreaker for reliable chip control Rhombic 55° form, 1.2 mm nose radius 0° negative rake for secure cutting Productivity gains through optimised grade and geometry The combination of the WPP05G grade and the Tiger·tec Gold coating delivers measurable productivity improvements when machining steel. The coated carbide composition is designed for the thermal and mechanical stresses typical of steel turning, which reduces flank wear and keeps cutting parameters stable over longer cycles. With the MP5 chipbreaker, chip form is consistent, reducing the risk of snarled chips and enabling higher uninterrupted feed rates. This results in more predictable cycle times and a better cost-per-component ratio in production environments. Robust cutting performance and reliable edge life A negative 0° rake and a 1.2 mm nose radius provide a secure cutting geometry that favours strength at the cutting edge, especially during heavier roughing operations. The rhombic 55° form balances entry angle and insert strength, making the design suitable for a range of turning tasks on unalloyed and alloyed steels. The coating technology improves heat resistance and adhesion, so the insert maintains a robust cutting edge and delivers repeatable performance across batch production. Practical applications and process benefits Designed for the ISO P material group, this indexable plate is particularly suited to turning operations where consistent chip control and tool life are priorities. The geometry and coated grade support both conventional and higher-speed machining strategies, providing flexibility across finishing and semi-finishing steps. By stabilising chip formation and reducing edge deterioration, the insert helps maintain surface quality and reduces secondary operations, contributing to overall process efficiency. Advice on selection and integration into production When integrating the insert into existing tool holders, the MP5 chipbreaker and the insert form should be matched to the intended feed and depth of cut to capitalise on its wear resistance. For customers unsure about parameter settings or compatible holders, Metav Werkzeuge can provide cutting data and application guidance to align the insert choice with machine capability and workpiece material. The result is a tailored machining solution that prioritises uptime and repeatable part quality. Contact Metav Werkzeuge for application advice on Walter Tools Tiger·tec Gold inserts — Metav Werkzeuge will advise on optimal cutting data and toolholder compatibility for the DNMG150612-MP5 WPP05G; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: DNMG150612-MP5-WPP05G-WALTER Designation: DNMG150612-MP5 WPP05G Product type: Indexable turning insert Series: Tiger-tec Gold Manufacturer: Walter Tools Numerical data Plate size: 15 Plate thickness: 06 Corner radius: 1.2 Free angle: 0° (negative) Tolerance class: M Special features Chipbreaker: MP5 Grade: WPP05G (coated carbide) Plate form: Rhombus 55° Execution: G Material application: Steel (ISO P) Series description: Belongs to Tiger·tec Gold coating technology FAQ What materials is this insert suitable for? The DNMG150612-MP5 WPP05G is formulated for ISO P materials and is optimised for machining unalloyed and alloyed steel. What is the main benefit of the WPP05G grade? WPP05G, part of the Tiger·tec Gold family, offers improved wear resistance and stable cutting behaviour, which extends tool life when turning steel. Which chipbreaker should be chosen for general turning? The MP5 chipbreaker on this insert provides reliable chip control for a wide range of turning operations and is well suited to general steel machining tasks. How does the 0° negative rake affect machining? A 0° negative rake increases edge strength and favours heavier cuts and interrupted cuts, making the insert robust for demanding turning operations. Is the DNMG150612-MP5 WPP05G suitable for finishing? Yes; while the geometry and grade support roughing, the coated composition and stable chip formation also allow for controlled finishing passes with appropriate cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and brand names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, brand-new goods from the manufacturer.
DNMG150612-MP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger·tec Gold coating, a dedicated MP5 chipbreaker and the rhombic 55° geometry for consistent, cost-effective steel machining; order genuine inserts via Metav Werkzeuge or consult the team for application advice. DNMG150612-MP5 WPP10G turning insert for steel – Walter Tools The DNMG150612-MP5 WPP10G is a rhombic 55° indexable turning insert with a 0° negative rake, designed for robust and repeatable machining of steel components in general turning applications. Tiger·tec Gold coating for long tool life WPP10G grade optimised for steel MP5 chipbreaker for reliable chip control Rhombic 55° geometry, 1.2 mm nose radius Steady productivity through optimised chip control The combination of the MP5 chipbreaker and the Tiger·tec Gold coating provides predictable chip formation and thermal stability, which reduces interruptions and tool changes during batch or single-part production. The insert’s chip control design lowers the risk of built-up edge and helps maintain cutting forces within expected limits, improving cycle-time consistency. For operations where repeatability matters, this geometry supports steady metal removal rates and fewer process adjustments. Designed for reliable steel machining with universal application Selected for the ISO P group, the WPP10G grade is a coated carbide developed to handle typical heat and chip characteristics when machining unalloyed and alloyed steel. The cutting material balance favours wear resistance while retaining enough toughness for variable feed and depth conditions. As a result, the insert offers a dependable compromise between wear life and edge stability, making it suitable for general turning and profile work on steel parts. Precision geometry that supports consistent part quality With a rhombic 55° form and a 1.2 mm nose radius, the insert delivers a balanced edge for stable contact and surface finish. The 0° negative rake increases strength at the cutting edge for interrupted cuts and tougher steel grades, while the tolerance class M ensures dimensional consistency across batches of inserts. This geometry helps secure consistent surface roughness and dimensional accuracy, reducing downstream rework and inspection effort. Practical benefits: less downtime, predictable performance Using this insert in production leads to fewer tool changes and more predictable maintenance intervals thanks to the coating and chipbreaker combination. The coated carbide grade resists abrasive wear, extending usable life under typical steel-cutting conditions. For manufacturers aiming to increase throughput with reliable tooling, the insert contributes to lower tooling costs per part and greater machine uptime without sacrificing process stability. Contact Metav Werkzeuge for tailored application guidance or to secure genuine Walter Tools Tiger·tec Gold turning inserts for your next production run Technical data SKU: DNMG150612-MP5-WPP10G-WALTER ISO designation: DNMG150612-MP5 WPP10G Base designation: DNMG150612-MP5 Brand: Walter Tools Numbers / Core technical data Corner radius: 1.2 mm Insert size: 15 Thickness designation: 06 Free angle: 0° (negative) Tolerance class: M Special features / Materials Series: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: MP5 Geometry: Rhombic 55° Application group: P (steel) Execution: G FAQ What materials is this insert best suited for? The DNMG150612-MP5 WPP10G is formulated for the ISO P group, making it suitable mainly for unalloyed and alloyed steel machining. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker on this Walter Tools insert promotes controlled chip formation and evacuation, reducing the likelihood of built-up edge and improving process stability during turning. Is the WPP10G grade coated, and what is the benefit? Yes, WPP10G is a coated carbide grade within the Tiger·tec Gold family; the coating enhances wear resistance and thermal stability for longer tool life in steel applications. Can the insert handle interrupted cuts? The 0° negative rake and robust geometry make the insert tolerant of interrupted cuts, offering increased edge strength compared with positive-rake alternatives. Which corner radius should be chosen for finer finishes? This specific insert has a 1.2 mm nose radius, which balances strength and finish; for finer surface requirements, a smaller radius insert would typically be chosen instead. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named trademark owners. The offered item is an original, factory-new product of the manufacturer.
DNMG150612-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the MP5 chipbreaker to secure stable chip control and long tool life during turning of Stahl; order the insert directly via Metav Werkzeuge or consult our technical team for cutting data and tool grouping. DNMG150612-MP5 WPP20G – Indexable turning insert, Tiger·tec Gold, Walter Tools The DNMG150612-MP5 WPP20G is a rhombic 55° indexable turning insert engineered for productive finishing and medium-turning operations in Stahl, offering a negative 0° rake for stable cuts. Tiger·tec Gold coating for extended life MP5 chipbreaker optimised for medium cuts Rhombic 55° geometry for versatile toolholders 0° negative rake for robust cutting stability Consistent productivity for Stahl machining The coated carbide grade WPP20G, part of the Tiger·tec Gold series, is formulated specifically for machining Stahl. Designed to handle the typical heat and chip formation of ferrous alloys, the grade balances wear resistance and toughness to provide reliable cutting performance. The combination of the MP5 chipbreaker and the rhombic 55° form reduces chatter tendencies and delivers a controlled chip flow, which simplifies swarf management and shortens cycle times during serial production. Where process stability is critical, this insert maintains dimensional consistency across repetitive passes. Better chip control and surface quality The MP5 chipbreaker, developed for medium-depth turning, shapes chips into manageable segments and prevents long stringing swarf. By doing so, surface finish is improved and tool engagement becomes more predictable. The insert’s 0° (negative) rake angle increases shear stability under heavy cuts, which is beneficial when facing interrupted cuts or less rigid set-ups. For customers transitioning from uncoated grades, the coating technology reduces built-up edge and thermal wear, so surface integrity is preserved and downstream finishing operations are reduced. Robust design for stable tool life With a 1.2 mm corner radius and the DNMG rhombic profile, the insert supports both finishing and semi-finishing applications without frequent index changes. The coated WPP20G composition provides a wear-resistant layer while retaining a tough substrate; this combination reduces flank wear and maintains edge geometry over longer periods. The insert’s tolerance class M ensures repeatable seating and positioning in standard toolholders, making tool changeover straightforward and helping to minimise setup time in production environments. Integration and recommended use cases This insert suits medium- to high-volume turning cells where consistent results and process security are priorities. It is particularly effective for turning unalloyed and alloyed Stahl, as indicated by its grade designation. When combined with appropriate cutting parameters—moderate feed rates and speeds aligned with the grade’s recommendations—the insert delivers predictable tool life and surface finish. For tool presetting and batch programming, the DNMG geometry integrates into common toolholder systems used in CNC lathes, streamlining tool management across the shop floor. Contact Metav Werkzeuge for tailored cutting data, toolholder recommendations and batch availability for the DNMG150612-MP5 WPP20G from Walter Tools Technical Data SKU: DNMG150612-MP5-WPP20G-WALTER Article designation: DNMG150612-MP5 Brand: Walter Tools Grade: WPP20G Series: Tiger·tec Gold Facts Insert size: 15 Thickness: 06 Corner radius: 1.2 mm Freedom angle: 0° (negative) Tolerance class: M Special features MP5 chipbreaker Coated carbide (Tiger·tec Gold) Rhombus 55° plate form Suitable for machining Stahl Execution: G FAQ What materials is this insert optimised for? The DNMG150612-MP5 WPP20G is optimised for machining Stahl; the WPP20G grade is formulated to manage the heat and chip formation typical of ferrous alloys. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker produces segmented chips for safer evacuation and improved surface quality; in the DNMG150612-MP5 WPP20G it supports predictable cutting in medium-depth turning. Can this insert be used for roughing and finishing? With its 1.2 mm corner radius and rhombic 55° geometry, the insert is suitable for both semi-finishing and finishing tasks when toolpath and cutting data are adapted accordingly. What does the 0° (negative) rake mean for process stability? A 0° negative rake increases edge strength and reduces the risk of chipping under interrupted cuts, providing greater stability in demanding turning operations using the DNMG150612-MP5 WPP20G. Where can cutting data and toolholder recommendations be obtained? Cutting data and holder suggestions for the DNMG150612-MP5 WPP20G are available from Metav Werkzeuge; consultation helps to match speeds, feeds and holder geometry to specific applications. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150612-MP5 WPP30G Wendeplatten - Walter Tools
The combination of a Tiger‑tec Gold coated carbide grade and the MP5 chipbreaker delivers consistent cutting performance and long tool life in Stahl turning operations; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. DNMG150612-MP5 WPP30G Drehwendeschneidplatte for Stahl — Tiger‑tec Gold by Walter Tools A versatile DNMG150612-MP5 WPP30G turning insert engineered for economical, stable machining of Stahl with a rhombic 55° form and optimised chip control. Tiger‑tec Gold coated carbide grade WPP30G For Stahl machining (ISO group P) Negative 0° rake, rhombic 55° form 1.2 mm corner radius for stable cutting Predictable performance through optimised grade and coating The combination of Tiger‑tec Gold technology and the WPP30G grade provides a balanced coating architecture designed to resist flank wear while promoting controlled chip formation. This carbide composition is tuned to the thermal and mechanical demands of machining Stahl, reducing the risk of edge chipping under interrupted cuts. The result is a predictable life cycle that supports stable process parameters and fewer tool changes. Geometry that stabilises the cutting process and surface finish The rhombic 55° insert geometry together with the negative 0° rake angle ensures a robust cutting edge and enhanced vibration damping for medium to heavy cuts. The 1.2 mm corner radius contributes to an even wear pattern and improved surface integrity on finished parts. The built-in MP5 chipbreaker assists in producing short, manageable chips that reduce build-up and improve workpiece quality without sacrificing material removal rates. Broad applicability and straightforward integration into tool systems Designed for the machining of Stahl (ISO group P), the insert fits standard DNMG toolholders and is suitable for a wide range of turning tasks from semi-finishing to more demanding roughing operations. Its balanced toughness and wear resistance make it suitable where a compromise between durability and versatility is required. The plate specification supports predictable cycle times and consistent part tolerances across batch production. Operational advantages: uptime, repeatability and economy By combining a coated carbide substrate with an engineered chipbreaker and stable geometry, the insert lowers the frequency of edge failures and reduces downtime associated with regrinding or replacement. The modest specification of the cutting edge delivers repeatable results in series production, contributing to overall process economy and reduced scrap rates. Integration into existing tool workflows is straightforward, supporting efficient changeovers and inventory management. For reliable productivity with Walter Tools' Tiger‑tec Gold inserts, contact Metav Werkzeuge for availability and tailored advice on tool selection and cutting data. Technical data SKU: DNMG150612-MP5-WPP30G-WALTER Article designation: DNMG150612-MP5 WPP30G Product type: Drehwendeschneidplatte Brand: Walter Tools Series: Tiger‑tec Gold Facts Corner radius: 1.2 mm Plate form: Rhombus 55° Rake angle: 0° (negative) Chipbreaker: MP5 Tolerance class: M Design / Special features Coating: Tiger‑tec Gold (coated carbide) Grade: WPP30G Material suitability: Stahl (ISO group P) Execution: G Plate size: 15 Plate thickness: 06 FAQ What materials is this insert intended for? The DNMG150612-MP5 WPP30G insert is specified for machining Stahl and is developed to handle the typical heat and chip characteristics of this material group. How does the MP5 chipbreaker influence chip control? The MP5 chipbreaker on the insert promotes short, controllable chips, which supports stable operations and reduces the likelihood of chip entanglement during turning. Is the geometry suitable for interrupted cutting? The rhombic 55° form with a negative rake and a 1.2 mm corner radius provides a robust edge geometry, making the insert well suited to interrupted cuts and applications requiring edge stability. Can the insert be used for finishing operations? Yes, the balanced toughness and coating of the WPP30G grade allow the insert to be applied in finishing and semi-finishing where surface integrity and consistent tool life are required. What is the product designation and brand of this insert? The item is a DNMG150612-MP5 WPP30G turning insert from Walter Tools, part of the Tiger‑tec Gold series, optimised for Stahl machining. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for clarification only. The offered item is an original, factory-new product of the manufacturer.
DNMG150612-MU5 WMP20S Wendeplatten - Walter Tools
Benefit from a durable, Tiger·tec Silver‑coated grade and the MU5 chipbreaker for consistently stable machining of rostfreier Stahl; the combination of robust edge strength and controlled chip formation supports efficient production. Order directly via Metav Werkzeuge or consult our technical advisors for application‑specific guidance. DNMG150612-MU5 WMP20S — Turning insert, Tiger·tec Silver, for rostfreier Stahl (Walter Tools) The DNMG150612-MU5 WMP20S is a coated turning insert optimised for medium to robust machining of rostfreier Stahl, offering stable cutting performance and predictable edge life for series production. Tiger·tec Silver coated grade WMP20S Optimised for rostfreier Stahl machining MU5 chipbreaker for stable chip control Rhombic 55° form with 1.2 corner radius Reliable edge life through advanced coating technology The insert combines the Tiger·tec Silver coating with the WMP20S coated‑carbide grade to deliver improved resistance to abrasive and adhesive wear in demanding applications. In practice, this coating system supports a stable cutting edge, reduces the tendency for built‑up edge and extends tool life compared with uncoated grades. For operations where consistent component quality and fewer tool changes matter, the coated substrate provides a measurable benefit in productivity and process stability while handling the higher heat and work‑hardening tendencies associated with rostfreier Stahl. Predictable chip control and mechanical strength The geometry — MU5 chipbreaker, rhombic 55° form and a 1.2 mm corner radius — is designed to promote predictable chip formation and to protect the cutting edge under medium to robust cutting parameters. The 0° negative rake provides additional edge support, reducing vibration and improving dimensional repeatability in roughing and finishing stages where interrupted cuts or heavier engagement occur. These characteristics translate into reduced downtime and fewer regrinds, increasing overall throughput on turning centres and lathes. Easy integration and application support for production lines With its ISO designation and common DNMG interface, the insert fits standard toolholders and can be introduced into existing tool systems with minimal adjustment. The grade is intended primarily for rostfreier Stahl and similar tough, heat‑sensitive alloys; machinability gains are achieved by matching cutting data and coolant strategy to the workpiece and machine. For tailored cutting data or to confirm suitability in specific setups, Metav Werkzeuge provides technical advice and practical recommendations to support process optimisation and reduce trial cycles. Contact Metav Werkzeuge for application advice and to secure DNMG150612-MU5 WMP20S inserts for rostfreier Stahl operations — phone +49 2822 7131930 or email info@metav-werkzeuge.com for rapid, specialist support Technical data Article number: DNMG150612-MU5-WMP20S-WALTER Article designation: DNMG150612-MU5 WMP20S Manufacturer: Walter Tools Facts Plate form: Rhombus 55° Inscribed circle/size: 15 Thickness code: 06 Corner radius: 1.2 Rake angle: 0° (negative) Special features Series: Tiger·tec Silver Grade/sort: WMP20S (coated carbide) Chipbreaker: MU5 Suitable for: rostfreier Stahl Plate designation: DNMG150612-MU5 FAQ What materials is this insert designed for? The DNMG150612-MU5 WMP20S turning insert from Walter Tools is designed specifically for machining rostfreier Stahl, offering improved chip control and edge life in these demanding materials. How does the MU5 chipbreaker affect performance? The MU5 chipbreaker promotes stable chip formation and evacuation, which helps maintain consistent surface finish and reduces the risk of edge damage during medium to robust cutting operations. Is the insert compatible with standard DNMG toolholders? Yes, the DNMG150612‑formatted insert fits common DNMG toolholders, allowing straightforward integration into existing turning tool setups without special adapters. What are the main advantages of the Tiger·tec Silver series? Tiger·tec Silver coatings provide enhanced wear resistance and thermal stability; in the WMP20S grade this improves edge life and process reliability when machining tough, heat‑sensitive alloys like rostfreier Stahl. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for clarification purposes only. There is no affiliation between our company and the manufacturers named. The offered item is an original, brand‑new product from the manufacturer.
DNMG150612-MU5 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger‑tec Gold coated grade and a precise rhombic 55° geometry to improve process stability and tool life in steel turning; the robust MU5 chipbreaker and a 1.2 mm corner radius help maintain consistent chip control and surface finish. Order directly via Metav Werkzeuge or consult our specialists for application guidance. DNMG150612-MU5 WPP05G indexable turning insert — Tiger‑tec Gold for steel machining (Walter Tools) The DNMG150612-MU5 WPP05G is an indexable turning insert designed for efficient steel turning, combining a coated carbide grade from the Tiger‑tec Gold family with a rhombic 55° geometry for versatile finishing and medium turning operations. Tiger‑tec Gold coated grade WPP05G MU5 chipbreaker for stable chip control Rhombic 55° geometry, 1.2 mm corner radius Suitable for steel machining (P) Consistent cutting performance and material suitability The Tiger‑tec Gold WPP05G grade is engineered for machining steel and balances wear resistance with toughness to withstand the thermal and mechanical loads typical in steel turning. The coated carbide substrate provides a stable cutting edge that reduces premature flank wear, which translates into fewer insert changes and more predictable tool life. For operations where consistent dimensional accuracy and reproducible surface quality are required, this design supports process reliability and repeatable results. Improved chip formation and surface finish Equipped with the MU5 chipbreaker, the insert controls chip formation across a range of cutting conditions and helps avoid long or tangled swarf. The combination of the optimised chipformer and the rhombic 55° profile contributes to a smoother cut and a superior surface finish on turned components. With a corner radius of 1.2 mm, the insert offers strength at the nose for improved edge stability, which benefits both finishing passes and light to medium-depth roughing where a good surface is still required. Geometry and mechanical advantages for workshop productivity The rhombic 55° shape and 0° (negative) relief angle deliver robust seating in standard toolholders and ensure secure clamping during heavy interrupted cuts. The insert dimensions (15 mm inscribed circle; thickness 6 mm) provide a compact profile while maintaining the mechanical mass necessary for vibration damping. This geometry supports machining cycles where a compact insert with a reliable edge line improves process uptime and reduces the risk of tool failure, supporting a smoother production flow. Application guidance and economic benefits Designed primarily for unalloyed and alloyed steels, the insert’s grade distribution (wear‑resistant yet sufficiently tough) permits a wide application window across finishing and general turning tasks. Using a coated grade like Tiger‑tec Gold often reduces secondary operations and dressing frequency, which can lead to lower unit costs over a production run. When selecting cutting parameters, match the toolholder, machine rigidity and coolant strategy to the intended steel grade to maximise the advantages of the insert’s coating and chipbreaker design. Contact Metav Werkzeuge to discuss how the Walter Tools Tiger‑tec Gold DNMG150612-MU5 WPP05G insert can enhance steel turning stability and efficiency, and arrange tailored application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DNMG150612-MU5-WPP05G-WALTER Designation: DNMG150612-MU5 WPP05G Brand: Walter Tools Product type: Indexable turning insert Facts Inscribed circle / size: 15 mm Corner radius: 1.2 mm Thickness: 6 mm Relief angle: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP05G (coated carbide) Chipbreaker: MU5 Geometry: Rhombic 55° Version: G Material suitability: Steel (P) Application: Turning / general machining FAQ What materials is this insert suitable for? The DNMG150612‑MU5 WPP05G insert is specified for steel machining (P); it is optimised for the thermal and chip‑forming characteristics typical of unalloyed and alloyed steels. What is the purpose of the MU5 chipbreaker? The MU5 chipbreaker is integrated to promote controlled chip formation during turning, improving swarf management and contributing to a consistent surface finish when machining steel. Can this insert be used for heavy roughing? The insert’s rhombic 55° geometry and 1.2 mm corner radius provide edge strength for moderate interrupted or heavy cuts, but selection should consider machine rigidity and tooling setup to ensure safe heavy cutting. Is the WPP05G grade suitable for finishing passes? Yes, the Tiger‑tec Gold WPP05G grade balances wear resistance and toughness, making it appropriate for finishing and medium turning operations where good surface quality and tool life are required. What does the negative 0° relief angle mean in practice? A 0° (negative) relief angle gives a stable cutting edge and improved toolholder support, which is beneficial in heavy cuts or applications with higher radial forces, enhancing edge life and process stability. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
DNMG150612-MU5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of high process stability and long tool life thanks to the coated grade and a controlled chipformer; these attributes support productive turning of steel with consistent surface quality. Order the DNMG150612-MU5 WPP10G turning insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150612-MU5 WPP10G turning insert – Tiger·tec Gold, for steel (P) DNMG150612-MU5 WPP10G is a 55° rhombic turning insert designed for robust steel machining, featuring the Tiger·tec Gold coating and the MU5 chipbreaker. Tiger·tec Gold coating for long life WPP10G grade optimised for steel DNMG 55° rhombic form for versatile turning MU5 chipbreaker for controlled chip flow Consistent cutting performance for steel components The combination of the WPP10G coated carbide grade and the Tiger·tec Gold technology is engineered for the thermal and mechanical demands of steel machining. This results in a stable cutting edge and predictable wear behaviour, which helps maintain part tolerances over longer tool life. The rhombic 55° geometry provides a versatile approach angle that balances cutting forces and surface finish, while the negative 0° clearance increases edge strength for heavier cuts. Such technical choices translate into fewer tool changes and improved machine uptime, supporting leaner production cycles and lower unit machining costs. Better chip control and improved productivity The integrated MU5 chipbreaker is shaped to produce short, manageable chips when turning steel, reducing the risk of entanglement and downtime for manual chip clearing. Controlled chip formation complements the coated grade: the coating reduces built-up edge and friction, while the chipformer directs chips away from the cutting zone. For operations that require reliable material evacuation and stable feeds, this results in fewer interruptions and a more predictable process window. The insert’s corner radius of 1.2 mm further balances edge strength and surface integrity, making it suitable for a range of finishing to semi-roughing passes. Practical application advice for efficient setup When integrating this insert into a turning process, pair the DNMG150612-MU5 WPP10G with a suitable holder that accepts DNMG 15 inserts and ensure correct clamping to maintain repeatability. The designation indicates an inscribed circle of 15 mm and a plate thickness code of 06, with the corner radius and geometry affecting feed and depth of cut choices. Because the grade is specified for material group P (steel) according to ISO 513, cutting parameters should be chosen with steel’s thermal conductivity and chip behaviour in mind. For higher reliability, set feeds to match the corner radius and maintain cutting speeds that avoid excessive temperature buildup at the edge. Reliability, economy and application scope The product’s design emphasises durability and broad applicability across unalloyed and alloyed steels; the coated carbide construction provides wear resistance while preserving a robust cutting edge. This combination supports productive turning where consistent surface quality and reproducible results are important. The insert is particularly suitable for manufacturers seeking a balance between tool life and versatility, offering repeated, dependable performance in serial production and jobbing environments. Contact Metav Werkzeuge for availability and application advice on Walter Tools Tiger·tec Gold inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: DNMG150612-MU5-WPP10G-WALTER Item designation: DNMG150612-MU5 WPP10G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP10G Shape: Rhombus 55° Chipbreaker: MU5 Facts Inscribed circle / size: 15 mm Corner radius: 1.2 mm Clearance angle: 0° (negative) Thickness code: 06 Tolerance class: M Special features Coating technology: Tiger·tec Gold Substrate: coated cemented carbide (coated carbide) Material suitability: Steel (ISO group P) Execution / style: G Robust edge for semi-roughing and finishing FAQ What materials is this insert suitable for? The DNMG150612-MU5 WPP10G insert is specified for ISO material group P and is optimised for turning unalloyed and alloyed steel. What does the WPP10G grade mean? WPP10G denotes a Walter Tools coated carbide grade within the Tiger·tec Gold family; it delivers wear resistance and thermal stability for steel machining. How does the MU5 chipbreaker affect machining? The MU5 chipbreaker produces controlled chip formation that aids evacuation and reduces the risk of long, stringy chips during steel turning. What are the main dimensional identifiers for this insert? Key identifiers are a 15 mm inscribed circle, a corner radius of 1.2 mm, the DNMG 55° geometry and the thickness code 06, as shown in the ISO designation DNMG150612-MU5 WPP10G. Is the negative 0° clearance a practical choice? Yes — the 0° (negative) clearance increases edge stability and is advantageous for heavier cuts or interrupted machining where a stronger cutting edge is required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The item offered is original, brand-new goods from the manufacturer.
DNMG150612-MU5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of high tool life, consistent chip control and straightforward handling for efficient steel turning operations. Benefit from the Tiger·tec Gold coating and the MU5 chipbreaker to maintain productivity and predictable edge performance. Order directly via Metav Werkzeuge or consult the team for application support. DNMG150612-MU5 WPP20G indexable turning insert — Tiger·tec Gold, MU5 chipbreaker — Walter Tools The DNMG150612-MU5 WPP20G is a rhombic 55° indexable insert engineered for general steel turning, offering robust edge life and reliable chip control in industrial turning applications. Tiger·tec Gold coating for extended wear life Rhombic 55° form with 1.2 mm corner radius MU5 chipbreaker for reliable chip control Consistent productivity for steel machining The combination of the WPP20G grade and Tiger·tec Gold coating provides a reliable balance between wear resistance and toughness for the machining of steel (ISO group P). The coated carbide chemistry is tailored to manage the thermal and mechanical stresses typical of steel turning, which means fewer unexpected tool changes and more predictable component output. This performance orientation supports longer runs in series production and contributes to overall process stability. Stable cutting and effective chip control The MU5 chipbreaker is designed for controlled chip segmentation and evacuation during turning operations. Paired with the Rhombic 55° geometry and a 1.2 mm corner radius, the insert combines edge strength with the capability for medium-duty finishing and semi-finishing applications. The 0° (negative) free angle increases cutting edge robustness, making the insert particularly suited to operations where stability and repeatability are critical rather than aggressive shear angles. Coating and material advantages explained The Tiger·tec Gold surface treatment is a high-performance, multilayer coating that enhances heat resistance and reduces abrasive wear on the cutting edge. For users without detailed coating knowledge: the coating acts as a protective barrier that reduces friction and maintains edge integrity under cyclic thermal loads. In practice, this translates to improved workpiece surface quality and a longer effective tool life when machining various steel grades within the P group. Practical handling and integration into turning processes The DNMG form factor fits standard toolholders made for DNMG inserts and allows straightforward indexing when an edge change is needed, minimising downtime. The designation includes a thickness code of 06 and a tolerance class M, which denotes medium tolerance suitable for most industrial turning setups and ensures consistent seat and clamping behaviour. The insert’s balanced properties make it a pragmatic choice for workshops seeking an economical, dependable solution for diverse steel turning tasks. Contact Metav Werkzeuge for tailored recommendations on Walter Tools inserts and availability; the Metav team can advise on tooling combinations and process parameters to match specific machining tasks. Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 Technical Data Article number: DNMG150612-MU5-WPP20G-WALTER Designation: DNMG150612-MU5 WPP20G Type: Indexable turning insert Brand: Walter Tools Series: Tiger-tec Gold Grade: WPP20G Core technical data Inscribed circle / size: 15 mm Corner radius: 1.2 mm Thickness code: 06 Free angle: 0° (negative) Tolerance class: M Design and features Chipbreaker: MU5 Plate form: Rhombus 55° Material designation: P (steel) Execution: G Series description: Tiger·tec Gold coated carbide FAQ What materials is this insert intended for? The DNMG150612-MU5 WPP20G from Walter Tools is designed primarily for steel (ISO group P), optimised for common unalloyed and alloyed steels. How does the MU5 chipbreaker affect machining? The MU5 chipbreaker improves chip segmentation and evacuation during turning, which enhances process reliability and surface finish when using the DNMG150612-MU5 WPP20G insert. Is the Tiger·tec Gold coating suitable for high-temperature conditions? Yes, the Tiger·tec Gold coating on the WPP20G grade is engineered to resist thermal and abrasive wear, supporting stable performance under the heat loads typical of steel turning. What does the tolerance class M mean for setup? Tolerance class M denotes medium tolerance; it ensures consistent seating and repeatable clamping in standard toolholders for DNMG inserts, aiding setup reliability. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150612-MW5 WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coated carbide and an MW5 chipbreaker for stable, productive machining of cast iron; the robust 1.2 mm corner radius and rhombic 55° geometry support repeatable tool life and reduced downtime. Order the DNMG150612-MW5 WKK10S insert directly via Metav Werkzeuge or consult our specialists for application advice. DNMG150612-MW5 WKK10S — Indexable turning insert for cast iron, Tiger·tec Silver (Walter Tools) A DNMG150612-MW5 WKK10S indexable insert engineered for efficient turning of cast iron components, combining Tiger·tec Silver technology with a dedicated chipbreaker for consistent machining results. Tiger·tec Silver coated carbide for wear resistance Optimised MW5 chipbreaker for stable chips Rhombic 55° geometry for versatile turning 1.2 mm corner radius for robust edge strength Greater productivity through coating and grade selection The insert’s Tiger·tec Silver coating and WKK10S grade are designed for the abrasive nature of cast-iron machining. This combination improves resistance to flank wear and thermal loading, which translates into longer intervals between index changes and more predictable cycle times. By aligning coating technology with a carbide grade tailored to cast iron, the insert supports economical production runs and reduced tool-related interruptions. The technical choice of a coated carbide builds a measurable foundation for process reliability in serial turning operations. Geometry and chip management that enhance stability The rhombic 55° shape together with the MW5 chipbreaker and a 0° (negative) free angle provide a geometry optimised for controlled chip formation when cutting cast iron. The 1.2 mm corner radius reinforces the cutting edge against sudden load peaks, improving edge stability and reducing the risk of premature edge chipping. Effective chip control minimises recutting and protects the workpiece surface, which is particularly beneficial in mixed-production environments where consistent surface finish and uptime are priorities. Integrating the insert into production for reliable outcomes Designed as an ISO-standard turning insert, the DNMG150612-MW5 WKK10S offers straightforward integration into common toolholders and turning systems. The tolerance class M and standard dimensions simplify setup and replacement cycles, supporting quick changeovers and consistent assembly accuracy. As part of Walter Tools’ Tiger·tec Silver series, the insert is positioned to deliver balanced wear resistance and toughness for cast-iron applications, enabling predictable tool life and steady production output. For detailed cutting parameters or process matching, technical consultation can ensure the insert meets specific cycle and surface requirements. For application-specific guidance or to secure DNMG150612-MW5 WKK10S inserts for cast-iron turning, contact Metav Werkzeuge for tailored advice and order coordination. Technical data SKU: DNMG150612-MW5-WKK10S-WALTER ISO designation: DNMG150612-MW5 WKK10S Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKK10S Execution: G Core specifications Corner radius: 1.2 mm Insert size: 15 mm Thickness: 6 mm Free angle: 0° (negative) Tolerance class: M Special features Chipbreaker: MW5 Shape: Rhombic 55° Coating / grade: coated carbide (Tiger·tec Silver) Material group: K (suitable for cast iron) ISO designation present: DNMG150612-MW5 WKK10S Series description: Tiger·tec Silver — WKK10S optimised for cast iron FAQ Which materials is this insert suitable for? The DNMG150612-MW5 WKK10S is optimised for machining cast iron (material group K) and is designed to handle the abrasive wear and short, breaking chips typical of these workpieces. What is the benefit of the MW5 chipbreaker? The MW5 chipbreaker on this insert improves chip control during cast-iron turning, promoting stable chip forms that protect the tool edge and reduce recutting, which helps maintain surface quality. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius increases edge strength and resistance to mechanical shock, leading to longer edge life under variable load conditions and contributing to reproducible cutting results. Is this insert compatible with standard DNMG toolholders? Yes, the ISO designation DNMG150612-MW5 WKK10S aligns with standard DNMG holders, allowing straightforward replacement and consistent mounting accuracy. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group and ranks among the leading manufacturers of precision tools for metalworking. Protected trademarks and product names belong to their respective owners. Mark names and protected designations are mentioned solely for explanation. There is no affiliation between our company and the mentioned manufacturers. The item offered is an original, brand-new article from the manufacturer.
DNMG150612-MW5 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of high abrasion resistance, consistent chip control and a robust 1.2 mm corner radius for reliable, repeatable turning in cast‑iron applications; order this insert via Metav Werkzeuge or consult our technicians for application advice. DNMG150612-MW5 WKK20S indexable turning insert — Tiger‑tec Silver coating, for cast iron, Walter Tools The DNMG150612-MW5 WKK20S is an indexable turning insert designed for productive finishing and medium-duty roughing of cast‑iron components. Tiger‑tec Silver coating for abrasive conditions Optimised MW5 chipbreaker for controlled chips Rhombic 55° geometry for versatile turning Corner radius 1.2 mm for edge stability Optimised performance for cast‑iron turning The combination of Tiger‑tec Silver technology and the WKK20S grade delivers increased wear resistance when machining cast iron, where abrasive wear and short, breakable chips are common. The coated carbide substrate provides a predictable tool life and helps maintain dimensional consistency over extended runs. The insert’s profile and coating are tuned to reduce flank wear, resulting in fewer tool changes and improved uptime on the lathe. Predictable chip control and surface quality Equipped with an MW5 chipbreaker, the geometry produces short, manageable chips that reduce downtime and improve operator safety. The rhombic 55° form permits a range of turning operations with stable engagement, while the 0° negative clearance enhances cutting edge strength for interrupted cuts. Together these features support a reliable machining process and help achieve consistent surface finish with minimal rework. Robust edge life and process reliability The 1.2 mm corner radius provides mechanical strength at the cutting edge, lowering the risk of chipping under variable loads and extending insert life in medium‑to‑high wear situations. This results in fewer indexings per component and a steadier production flow. For production environments requiring repeatable results, the insert’s tolerance class M and stable geometry contribute to reproducible part quality. Practical fitment and series benefits Belonging to the Tiger‑tec Silver series, the insert is manufactured to industrial standards for interchangeability and process integration. The DNMG150612-MW5 form factor fits many standard toolholders specified for rhombic 55° turning inserts and is particularly suitable where cast‑iron machinability dictates a specialised grade. The controlled combination of substrate, coating and chipbreaker supports both finishing and general turning tasks. Contact Metav Werkzeuge for tailored recommendations on using this Walter Tools insert and to discuss suitable holders or cutting parameters; Metav Werkzeuge can advise on optimisation for particular cast‑iron grades and production setups. Technical Data Article number: DNMG150612-MW5-WKK20S-WALTER Product name: Drehwendeschneidplatte DNMG150612-MW5 WKK20S Walter Tools Product type: Indexable turning insert Series: Tiger‑tec Silver Grade: WKK20S Manufacturer: Walter Tools Facts Plate form: Rhombus 55° Free angle: 0° (negative) Corner radius: 1.2 Plate size: 15 Plate thickness: 06 Tolerance class: M Special features Coating technology: Tiger‑tec Silver (coated carbide) Chipbreaker: MW5 Material application: Cast iron (K) Intended use: Turning — finishing and general-purpose operations FAQ Which materials is this insert intended for? The DNMG150612-MW5 WKK20S from Walter Tools is optimised for cast iron machining (material group K), where its grade and coating counter abrasive wear and handle short, breaking chips. What advantage does the Tiger‑tec Silver coating offer? Tiger‑tec Silver increases abrasion resistance and thermal stability on the cutting edge, so the Walter Tools insert sustains performance longer under abrasive cast‑iron conditions. How does the MW5 chipbreaker affect machining? The MW5 chipbreaker ensures controlled, short chips that simplify chip evacuation and reduce entanglement, improving process reliability and operator safety during turning. Is the insert suitable for interrupted cuts? The combination of a 0° negative clearance and a 1.2 mm corner radius gives the insert robust edge strength, making it appropriate for intermittent engagement and variable cutting conditions. What toolholders are compatible with this insert form? The DNMG150612-MW5 form factor is compatible with standard holders designed for rhombic 55° inserts; consult Metav Werkzeuge for confirmed holder recommendations and clamping systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only; no affiliation with Metav Werkzeuge is implied. The offered article is an original, factory‑new product of the stated manufacturer.
DNMG150612-MW5 WPP05G WPP05G Wendeplatten - Walter Tools
Combining the Tiger‑tec Gold coated grade WPP05G with the MW5 chipbreaker yields stable chip formation and increased productivity in steel turning; benefit from enhanced edge strength and predictable tool life. Order the DNMG150612‑MW5 WPP05G directly via Metav Werkzeuge or request machining consultation for optimal cutting parameters. DNMG150612‑MW5 WPP05G – Turning insert (MW5 chipbreaker, Tiger‑tec Gold) by Walter Tools The DNMG150612‑MW5 WPP05G is a negative‑rake turning insert designed for steel machining, combining a Tiger‑tec Gold coated carbide grade with an MW5 chipbreaker for controlled chip evacuation and reliable performance. Tiger‑tec Gold coated grade WPP05G MW5 chipbreaker for controlled chips Rhombic 55° geometry for versatile turning 1.2 mm nose radius for robust edge strength Boosted productivity through advanced coating and grade The combination of Tiger‑tec Gold coating and the WPP05G grade is engineered to increase machining throughput when working with ISO P materials like steel. The coating delivers improved wear resistance, reducing flank wear rates and sustaining cutting edge integrity over longer runs. As a result, cycle times are shortened and tool changes become less frequent, which supports higher overall line efficiency and lower per‑part machining costs. The coated carbide substrate also helps maintain dimensional stability during heavier cuts, translating to consistent part quality. Consistent chip control for uninterrupted turning The MW5 chipbreaker provides controlled chip formation across a range of cutting conditions, improving both safety and surface quality. By shaping and segmenting chips reliably, the insert minimises the risk of long, entangling swarf and promotes steady evacuation from the cutting zone. This controlled behaviour supports uninterrupted production, reduces machine downtime for cleaning, and simplifies coolant and chip management. The practical benefit is a more predictable machining process with fewer interruptions and improved workpiece finish. Versatile geometry that supports a wide range of operations The rhombic 55° geometry and negative 0° clearance configuration make the insert well suited to conventional turning tasks where rigidity and stable cutting are priorities. The 1.2 mm nose radius yields improved edge strength for interrupted cuts and roughing passes while still enabling acceptable surface finishes in finish operations. The insert form offers access to varied part contours and performs reliably in facing, external turning and medium‑duty profiling, delivering a balance between robustness and accuracy. Predictable tool life and process stability Built to tolerance class M and produced in Walter Tools’ Tiger‑tec Gold family, this coated insert promotes repeatable performance and extended lifetime under typical steel cutting conditions. The engineered wear behaviour supports planning of tool change intervals and process windows, which aids in maintaining consistent part tolerances and reducing scrap rates. The result is a machining setup that is easier to control, with dependable cutting performance that aligns with production scheduling and cost‑efficiency targets. For steel turning applications that demand reliable chip control and long tool life, consider the Walter Tools Tiger‑tec Gold DNMG150612‑MW5 WPP05G — contact Metav Werkzeuge for availability and tailored cutting data at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DNMG150612‑MW5‑WPP05G‑WALTER Description: Turning insert (DNMG) Series: Tiger‑tec Gold Grade: WPP05G Manufacturer: Walter Tools Facts Insert size: 15 Thickness: 06 Nose radius: 1.2 mm Clearance angle: 0° (negative) Tolerance class: M Chipbreaker: MW5 Special features Coating / grade: Tiger‑tec Gold coated carbide Shape: Rhombus 55° Execution: G Suitable for: Steel (ISO P) FAQ What materials is this insert suited for? The DNMG150612‑MW5 WPP05G is designed primarily for ISO P materials and is suitable for machining a wide range of steels under typical turning conditions. How does the MW5 chipbreaker affect machining? The MW5 chipbreaker on the Walter Tools insert improves chip control and segmentation, which reduces swarf issues and helps maintain uninterrupted production and consistent surface quality. What advantages does the Tiger‑tec Gold coating provide? Tiger‑tec Gold coating increases wear resistance and thermal stability of the WPP05G grade, resulting in longer tool life and more predictable cutting performance when turning steel. Is the insert geometry suitable for interrupted cuts? Yes, the rhombic 55° form combined with a 1.2 mm nose radius provides robust edge strength, making the insert a good choice for interrupted cuts and medium‑duty roughing operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150612-MW5 WPP10G WPP10G Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Gold technology and the robust MW5 chipformer, this insert combines long tool life with consistent chip control for steel machining. The rhombic 55° geometry with a 1.2 mm corner radius and negative 0° relief provides stability in demanding turning operations. Order the DNMG150612-MW5 WPP10G directly via Metav Werkzeuge or contact the consultants for tailored advice. DNMG150612-MW5 WPP10G – indexable turning insert, Tiger·tec Gold coating, for steel (P) | Walter Tools A DNMG150612-MW5 WPP10G indexable turning insert engineered for productive steel turning, offering reliable chip control and high wear resistance in general machining applications Tiger·tec Gold coated, high wear resistance Optimised MW5 chipformer for stable chips Rhombic 55° form with 1.2 mm corner radius Negative 0° relief for robust cutting action Higher productivity through proven coating technology Equipped with the Tiger·tec Gold coating and the WPP10G grade, this insert is developed to deliver consistent wear resistance and predictable performance when machining steel (P) materials. The coated carbide construction reduces flank wear and supports longer tool life, which in turn lowers tooling costs per component and increases uptime. The result is a measurable gain in machining efficiency and fewer unexpected tool changes during shifts. Reliable chip control for stable machining results The integrated MW5 chipbreaker is designed to generate short, controllable chips during turning of unalloyed and alloyed steels, improving swarf handling and reducing the risk of entanglement. Combined with the rhombic 55° shape and a 1.2 mm corner radius, the geometry provides a balance of strength and accessibility for general turning tasks. The negative 0° relief enhances edge stability under heavier depths of cut and interrupted operations, ensuring secure cutting conditions and repeatable component quality. Practical fitment and process benefits for workshop use Marked as DNMG format with a plate size of 15 and thickness 06, the insert is compatible with common DNMG toolholders, enabling straightforward integration into existing toolsets. The grade’s composition makes it suitable for a wide range of steel applications as defined by ISO 513, prioritising stable chip formation and good surface finish where required. Together, these characteristics support reduced setup complexity and a predictable replacement interval that aids production planning. For additional technical details or application-specific recommendations, technical consultants at Metav Werkzeuge are available to assist. Contact Metav Werkzeuge for precise application advice and supply of genuine Walter Tools Tiger·tec Gold inserts to optimise turning performance Technical data SKU: DNMG150612-MW5-WPP10G-WALTER Article designation: DNMG150612-MW5 WPP10G Label: Drehwendeschneidplatte DNMG150612-MW5 WPP10G Walter Tools Manufacturer: Walter Tools Core specifications Insert size: 15 Thickness: 06 Corner radius: 1.2 mm Relief angle: 0° (negative) Tolerance class: M Features and applications Series: Tiger·tec Gold Grade/sort: WPP10G Chipformer: MW5 Form: Rhombus 55° Execution/grade: G Suitable for steel (P) FAQ What materials is this insert intended for? The DNMG150612-MW5 WPP10G from Walter Tools is intended primarily for machining steel (P) according to ISO 513, optimised for typical heat and chip formation in steel turning. How does the MW5 chipbreaker affect machining? The MW5 chipformer on this insert produces short, controlled chips that improve swarf evacuation and promote safer, more consistent turning processes with reduced risk of chip-related interruptions. Is this insert suitable for interrupted cuts or heavy cuts? Yes, the combination of a negative 0° relief, rhombic geometry and a 1.2 mm corner radius provides robust edge support, making it suitable for heavier depths of cut and applications with intermittent engagement. Which toolholders fit the DNMG150612-MW5 format? Standard toolholders designed for DNMG turning inserts accept the DNMG150612-MW5 WPP10G; compatibility with existing DNMG tooling systems facilitates quick integration. What advantages does the Tiger·tec Gold series bring to production? The Tiger·tec Gold technology in the WPP10G grade enhances wear resistance and process stability, resulting in longer tool life, more consistent surface finishes and reduced tooling costs per part. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tooling for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered marks are mentioned for explanatory purposes only; there is no affiliation between our company and the named manufacturers. The item offered is an original, factory-new product of the manufacturer.
DNMG150612-MW5 WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the MW5 chipformer to achieve reliable, long-lasting performance when turning steel; the rhombic 55° geometry with a 1.2 mm corner radius delivers a balanced combination of surface finish and process security. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. DNMG150612-MW5 WPP20G turning insert – Tiger·tec Gold, MW5 chipformer (Walter Tools) The DNMG150612-MW5 WPP20G is a rhombic 55° turning insert optimised for robust finishing and medium roughing of steel in production environments. Tiger·tec Gold coating for long tool life MW5 chipformer for stable chip control Rhombic 55° insert with 1.2 mm corner radius Negative 0° rake for secure cutting Consistent performance for steel turning operations The combination of the WPP20G grade and the Tiger·tec Gold coating results in a wear-resistant cutting edge designed specifically for the thermal and mechanical demands of turning steel. The coated carbide composition offers a balanced hardness and toughness profile, which reduces flank wear and maintains dimensional stability over extended cycles. For production shops and subcontractors focused on repeatable component quality, this turning grade supports predictable tool-life planning and fewer insert changes, lowering downtime and increasing throughput. Stable chip control and secure cutting for reliable finishes Equipped with the MW5 chipformer and a 0° negative rake, the geometry of this insert promotes controlled chip breakage and safe cutting forces when machining typical ISO P materials. The Rhombus 55° shape, combined with a 1.2 mm corner radius, allows a compromise between surface quality and modest metal removal rates: suitable for finishing passes and medium roughing where a reliable surface and process stability are required. The stable chipflow reduces the risk of edge damage and contributes to consistent surface integrity on turned parts. Easy integration into productive toolpaths and fixtures The insert’s dimensional profile and tolerance class M ensure compatibility with standard toolholders and clamping systems used in turning centres. As a coated carbide solution designed for steel, the grade supports a wide range of cutting parameters, enabling process engineers to tune speed and feed for optimal cycle time and part finish. The predictable behaviour of the cutting edge simplifies parameter selection and reduces trial-and-error at setup, supporting a more efficient production ramp-up and more consistent batch quality across shifts. Discuss the application potential of the Walter Tools DNMG150612-MW5 WPP20G insert with Metav Werkzeuge for tailored recommendations and fast delivery Technical Data Article number: DNMG150612-MW5-WPP20G-WALTER Label: Drehwendeschneidplatte DNMG150612-MW5 WPP20G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Grade: WPP20G Series: Tiger-tec Gold Material code: P Tolerance class: M Facts Corner radius: 1.2 mm Inscribed size: 15 mm Thickness code: 06 Rake angle: 0° (negative) Insert form: Rhombus 55° Special features Chipformer: MW5 Coating/technology: Tiger·tec Gold (coated carbide) Application group: Steel (ISO P) Suitable for finishing and medium roughing FAQ What materials is this insert designed for? The DNMG150612-MW5 WPP20G insert is designed primarily for steel (ISO P), as indicated by the WPP20G grade and its thermal-mechanical optimisation. How does the MW5 chipformer affect machining? The MW5 chipformer promotes stable chip control and predictable breakage, improving process security and contributing to consistent surface finishes when turning steel. Can this insert be used for finishing passes? Yes, the Rhombus 55° shape combined with the 1.2 mm corner radius makes the insert suitable for finishing and medium roughing operations where good surface integrity is required. What does the 0° negative rake mean in practice? A 0° negative rake provides a robust cutting geometry with lower tendency for chipping at the cutting edge, which enhances reliability when handling typical steel alloys and less forgiving cutting conditions. Is the WPP20G grade coated or uncoated? WPP20G is a coated carbide grade utilising the Tiger·tec Gold technology, aimed at delivering a balance of wear resistance and toughness for steel machining. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are cited for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
DNMG150612-NMT WS10 WS10 Wendeplatten - Walter Tools
Take advantage of the combination of WS10 coated carbide, NMT chipbreaker and Rhombus 55° geometry for consistent chip control and predictable tool life; order the DNMG150612-NMT WS10 directly via Metav Werkzeuge or consult the technical team for application matching. DNMG150612-NMT WS10 indexable turning insert with NMT chipbreaker by Walter Tools The DNMG150612-NMT WS10 is an indexable turning insert designed for general turning operations where reliable chip formation and stable cutting are required. Coated carbide WS10 for broad application Rhombic 55° geometry for versatile turning NMT chipbreaker for reliable chip control 0° (negative) rake for stable cutting Efficient cutting performance for productive turning The WS10 grade, a coated carbide formulation from Walter Tools, focuses on productive machining with an emphasis on stable chip formation. Combined with the NMT chipbreaker, this insert promotes predictable chip segmentation, which reduces the risk of built-up edge and unplanned interruptions in production. The rhombic 55° shape allows a wide range of turning applications, offering a balance between strength at the cutting edge and accessibility for different toolholder geometries. These technical choices translate into measurable process benefits: fewer tool changes, reduced scrap rates and improved cycle-time consistency. Geometry and edge design that enhance process reliability A 0° (negative) rake and a 1.2 mm corner radius ensure robust cutting conditions when facing moderate interrupted cuts or tougher workpiece surfaces. The negative rake contributes to a stronger cutting edge and higher stability under load, while the corner radius provides added edge support, improving surface finish consistency on the workpiece. The insert thickness and the Rhombus 55° form offer a secure clamping fit in standard toolholders, enabling repeatable positioning and minimal run-out. Together, these geometric features support predictable tool life and stable turning cycles. Application guidance and selection rationale Selection of the correct grade and geometry should be based on the specific workpiece material and machining parameters; the WS10 insert is supplied with a matrix recommendation for workpiece suitability, so the material compatibility must be checked against that product matrix. In practice, the insert serves well where a compromise is required between tool life and finishing capability, and it performs reliably in series production when paired with the appropriate cutting data. For process planners and shop-floor engineers, the emphasis is on reproducible results: the combination of WS10, NMT chip control and the rhombic profile enables a stable, economical turning process with clear productivity advantages. Contact Metav Werkzeuge today to specify the Walter Tools DNMG150612-NMT WS10 for improved chip control and process stability in turning operations Technical data SKU: DNMG150612-NMT-WS10-WALTER Designation: DNMG150612-NMT WS10 Product type: Indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Facts Inscribed circle / size: 15 Corner radius: 1.2 mm Thickness: 06 Free cutting angle: 0° (negative) Tolerance class: M Special features Grade: WS10 Chipbreaker: NMT Material: Katalogabhängig Series: Walter Schneidstoffsorte - Serie offen Execution: G Plate form: Rhombus 55° Manufacturer: Walter Tools FAQ What distinguishes the WS10 grade from other carbide inserts? The WS10 grade is a coated carbide formulation developed by Walter Tools that aims for balanced wear resistance and stable chip formation, making the DNMG150612-NMT WS10 suitable for a variety of turning tasks where consistent tool life is required. How does the NMT chipbreaker affect machining? The NMT chipbreaker promotes controlled chip formation and evacuation, which reduces interruptions and helps maintain a clean cutting zone when using the DNMG150612-NMT WS10 insert. Is the DNMG150612-NMT WS10 suitable for heavy interrupted cuts? The combination of a 0° (negative) rake and a 1.2 mm corner radius provides a robust cutting edge on the DNMG150612-NMT WS10, improving stability under heavier or partially interrupted cutting conditions. How should the insert geometry influence toolholder selection? The Rhombus 55° form calls for toolholders compatible with rhombic inserts; selecting the correct clamp and seat ensures repeatable positioning and optimal load distribution for the DNMG150612-NMT WS10. Where to check material compatibility before application? Material suitability should be verified using the product matrix provided for the WS10 grade; the DNMG150612-NMT WS10’s application notes recommend consulting that matrix to match workpiece materials and cutting data. Manufacturer/Responsible: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
DNMG150612-NRS WSM10S WSM10S Wendeplatten - Walter Tools
Combining the WSM10S grade in the Tiger‑tec Silver series with the robust NRS chipbreaker and a 1.2 mm nose radius results in secure chip formation, high process stability and extended tool life for demanding turning applications; order the insert directly via Metav Werkzeuge or request application advice from the consultants. DNMG150612-NRS WSM10S turning insert — Tiger‑tec Silver, for rostfreier Stahl and superalloys | Walter Tools The DNMG150612-NRS WSM10S is a coated indexable turning insert designed for heavy-duty machining of rostfreier Stahl and heat-resistant superalloys, offering a negative 0° relief for robust cutting performance. DNMG150612 format with 55° rhombic geometry Tiger‑tec Silver coated grade WSM10S Optimised NRS chipbreaker for stable chip control Corner radius 1.2 mm for improved edge strength Predictable chip control for improved process security The combination of the NRS chipbreaker and the WSM10S grade targets consistent chip formation when machining tough workpiece groups such as rostfreier Stahl (ISO M) and heat‑resistant alloys (ISO S). The NRS geometry is engineered to produce short, controllable chips under varying feeds, which reduces risk of built‑up edge and improves machine uptime. The negative 0° relief increases edge robustness, making the insert particularly suited to interrupted cuts and applications where stability is essential. For users seeking repeatable results, this geometry supports a stable cutting regime and fewer unscheduled tool changes. Coating and grade: longer life and thermal resilience The Tiger‑tec Silver coating combined with the WSM10S coated cemented carbide grade provides a thermal barrier and improved wear resistance during high temperature cutting conditions. Coatings of this type reduce flank wear and slow crater formation, which extends the effective tool life and maintains dimensional accuracy over longer production runs. The grade is optimised for applications with poor heat conductivity in the workpiece, so the insert helps to avoid premature edge failure and maintains a consistent surface finish even under strenuous cutting conditions. Geometry and handling for machinability and surface finish The rhombic 55° form (DNMG) and the 1.2 mm nose radius balance strength and surface integrity: the radius supports robust cutting edges while enabling acceptable surface finishes on turned parts. Plate thickness and the DNMG form ensure secure clamping in standard toolholders and straightforward changeover in multi‑station turrets. Because the insert belongs to the Tiger‑tec Silver series and carries the WSM10S designation, it integrates well into production cycles that demand both productivity and predictable tool behaviour, especially where rostfreier Stahl and superalloys are processed. For tailored application guidance on the Walter Tools Tiger‑tec Silver DNMG150612‑NRS WSM10S insert, contact Metav Werkzeuge for cutting parameters and material recommendations via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: DNMG150612-NRS-WSM10S-WALTER Item designation: DNMG150612-NRS WSM10S Series: Tiger‑tec Silver Manufacturer: Walter Tools Facts Plate size / inscribed circle: 15 Plate thickness: 06 Corner radius: 1,2 mm Relief angle: 0° (negativ) Tolerance class: M Special features Grade: WSM10S Chipbreaker: NRS Plate shape: Rhombus 55° Suitable for: rostfreier Stahl (ISO M), Superalloys/Titan (ISO S) Sortenbeschreibung: coated cemented carbide, high thermal resistance FAQ What materials is this insert suitable for? The DNMG150612‑NRS WSM10S insert from Walter Tools is specified for rostfreier Stahl and for heat‑resistant superalloys and titanium alloys (ISO S and M), reflecting the grade’s thermal stability and wear resistance. How does the NRS chipbreaker help on rostfreier Stahl? The NRS chipbreaker is designed to promote short, positive chips when machining rostfreier Stahl; this reduces built‑up edge formation and supports continuous production with fewer interruptions. What benefit does the Tiger‑tec Silver coating provide? Tiger‑tec Silver coating on the WSM10S grade forms a protective layer that reduces flank wear and improves thermal resistance, thereby extending the insert’s service life under elevated cutting temperatures. Is the 0° relief suitable for interrupted cuts? Yes, the negative 0° relief increases edge strength and stability, which is advantageous in interrupted cutting or applications with variable engagement. What does the DNMG150612 designation mean in practice? The DNMG150612 format indicates a 55° rhombic insert geometry with the specified plate size and corner radius; in production this equates to compatibility with standard DNMG toolholders and predictable contact conditions at the cutting edge. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150612-NRS WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger-tec Silver coating and the WSM20S grade for secure chip formation and extended edge life in demanding turning tasks; order directly via Metav Werkzeuge or consult the team for application advice. DNMG150612-NRS WSM20S — Indexable turning insert for rostfreier Stahl and superalloys by Walter Tools DNMG150612-NRS WSM20S is an indexable turning insert designed for tough materials and high-temperature alloys, offering robust edge stability and consistent performance in heavy-duty turning operations. Tiger-tec Silver coating for wear resistance Grade WSM20S for heavy-duty materials Rhombus 55° geometry for versatile turning 0° (negative) relief angle for secure edges High-performance grade for demanding materials The WSM20S grade, part of the Tiger-tec Silver family, is engineered as a coated carbide solution for machining rostfreier Stahl and heat-resistant superalloys. Its coating system improves surface hardness and thermal resistance, which translates into stable chip formation and reduced edge wear during prolonged cuts. For production environments where tool life and process consistency matter, this insert provides a reliable balance between wear resistance and fracture toughness, helping to lower tooling costs per component and maintain consistent cycle times. Geometry and chip control that protect the cutting edge The insert's rhombus 55° shape and NRS chipbreaker are configured to support controlled chip evacuation and adaptable cutting directions. The 0° (negative) relief angle increases cutting-edge support under heavy radial loads, while the 1.2 mm corner radius contributes to a reinforced cutting edge for interrupted cuts or uneven workpiece surfaces. These design choices reduce the risk of edge chipping and improve surface finish in roughing-to-finishing sequences. For operators unfamiliar with technical terms: the chipbreaker guides and splits chips to prevent long, tangled swarf and the negative relief angle provides extra support behind the cutting edge. Practical advantages for production and tool management The insert is supplied in the widely used DNMG footprint, enabling straightforward integration into existing toolholders and reducing changeover complexity. Its specification supports machining strategies that prioritise productivity—longer tool life and fewer interruptions mean improved machine uptime. The variant is particularly suitable where process reliability and repeatable results are required in series production. For offline programming or process planning, note the grade and geometry to match cutting data with the chosen holder and machine capability, ensuring optimal cutting speeds and feeds for rostfreier Stahl and related alloys. Discuss your specific application with Metav Werkzeuge to ensure the DNMG150612-NRS WSM20S insert meets production needs and to receive tailored recommendations for cutting data and holder selection Technical data SKU: DNMG150612-NRS-WSM20S-WALTER Article label: Drehwendeschneidplatte DNMG150612-NRS WSM20S Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WSM20S Product type: Indexable turning insert Core figures Corner radius: 1.2 mm Relief angle: 0° (negative) Insert size: 15 Thickness code: 06 Geometry: Rhombus 55° Special features Coating: Tiger-tec Silver (coated carbide) Chipbreaker: NRS Suitable for: rostfreier Stahl (M) Also suitable for: Superalloys / Titanium (S) Tolerance class: M Execution code: G FAQ Which materials are best machined with this insert? The DNMG150612-NRS WSM20S insert from Walter Tools is optimised for machining rostfreier Stahl and can also handle heat‑resistant superalloys and titanium applications depending on geometry. What does the WSM20S grade provide in terms of performance? WSM20S, part of the Tiger‑tec Silver family, offers enhanced thermal stability and wear resistance, delivering stable chip formation and extended tool life under demanding turning conditions. How does the insert geometry affect operation? The rhombus 55° shape with a 1.2 mm corner radius and the NRS chipbreaker give a good balance between strength and chip control, supporting heavy cuts and improved surface finish in interrupted and continuous turning. Is this insert compatible with standard DNMG toolholders? Yes, the insert matches the DNMG footprint and is suitable for standard DNMG toolholders, facilitating easy integration and quick changeover in production environments. What cutting situations benefit most from the 0° (negative) relief angle? The 0° (negative) relief angle increases support behind the cutting edge, making the insert particularly robust for heavy or unstable cuts where edge chipping risk is higher. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes and do not indicate any affiliation with our company. The item offered is original, factory-new merchandise from the manufacturer.
DNMG150612-RM5 WMP20G RM5 Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the robust WMP20G grade and a Rhombic 55° geometry for reliable machining of rostfreier Stahl; order the DNMG150612-RM5 WMP20G directly via Metav Werkzeuge or consult our advisers for application support. DNMG150612-RM5 WMP20G indexable insert – Rhombic 55°, Tiger·tec Gold (rostfreier Stahl) — Walter Tools The DNMG150612-RM5 WMP20G is an indexable turning insert engineered for medium to heavy-duty turning of rostfreier Stahl, combining Tiger·tec Gold coating with an RM5 chipbreaker for stable chip control Tiger·tec Gold coating for long tool life WMP20G grade for rostfreier Stahl machining Rhombic 55° geometry for versatile turning 1.2 mm corner radius with RM5 chipbreaker Improved process reliability for rostfreier Stahl turning The combination of the Tiger·tec Gold coating and the WMP20G grade stabilises the cutting edge under high temperatures typical of rostfreier Stahl machining. This engineered coating structure reduces built-up edge formation and extends runtimes, which in turn lowers tool-change frequency and increases overall spindle uptime. The result is a measurable improvement in process reliability during medium to robust cutting conditions. Efficient chip control and surface integrity The dedicated RM5 chipbreaker, paired with a 1.2 mm corner radius, produces predictable chip forms and supports continuous metal removal without interruptions. Predictable chips reduce machine downtime and protect the workpiece surface, delivering consistent surface finish and dimensional stability; this is particularly important when processing heat-sensitive rostfreier Stahl where surface integrity is critical. Geometry and clamping advantages for versatile operations The Rhombic 55° insert geometry offers a balance between strength and accessibility for a wide range of turning applications. The negative 0° clearance provides a stable cutting stance for heavier depths of cut, while the insert form supports a variety of toolholder configurations. Together these attributes enable productive turning cycles and simplify tool selection for mixed-production environments. Practical benefits for workshop productivity Implementing this insert in production routines leads to fewer tool interventions and steadier quality output. The coated carbide substrate and the grade chemistry are optimised for the thermal and mechanical demands of rostfreier Stahl; this lowers scrap rates and stabilises batch-to-batch results. For engineering teams seeking predictable machining windows, the insert contributes directly to lower unit costs through higher usable tool life. For tailored advice on clamping options, cutting data or to reserve DNMG150612-RM5 WMP20G inserts from Walter Tools, contact Metav Werkzeuge for technical consultation and availability. Technical data Article number: DNMG150612-RM5-WMP20G-WALTER Designation: DNMG150612-RM5 WMP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Core technical data Plate size: 15 Plate thickness: 06 Corner radius: 1.2 mm Plate form: Rhombus 55° Clearance angle: 0° (negativ) Tolerance class: M Special features Coating / Grade: Tiger·tec Gold / WMP20G Chipbreaker: RM5 Material suitability: rostfreier Stahl Typical application: turning / indexable insert Execution: G FAQ What materials is this insert suited for? The DNMG150612-RM5 WMP20G insert is designed primarily for machining rostfreier Stahl and performs reliably under the associated thermal and mechanical conditions. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold on the WMP20G grade reduces heat impact and supports stable edge retention, which extends tool life and reduces the frequency of insert changes in serial turning operations. Which chipbreaker is fitted and why is it important? This insert uses the RM5 chipbreaker; it ensures controlled chip formation, improving evacuation and protecting the machined surface during continuous cuts. Can the Rhombic 55° geometry handle heavy cuts? The Rhombic 55° form, combined with a negative 0° clearance, provides a robust configuration suitable for medium to heavy depths of cut while maintaining accessibility in a range of toolholders. What does the 1.2 mm corner radius influence in practice? A 1.2 mm corner radius increases edge strength and contributes to improved surface finish and dimensional stability, especially in interrupted or semi-heavy turning of rostfreier Stahl. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150612-RM5 WMP20S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating and the WMP20S grade for reliable performance when machining stainless steel; the rhombic 55° geometry with a 1.2 mm corner radius and an RM5 chipbreaker supports stable chip control and long tool life. Order this turning insert directly via Metav Werkzeuge or contact the consultants for tailored application advice. DNMG150612‑RM5 WMP20S Turning insert — Tiger‑tec Silver, for stainless steel (Walter Tools) The DNMG150612‑RM5 WMP20S is a rhombic‑55° indexable turning insert with negative geometry, designed for medium to robust conditions in stainless steel machining and optimised for secure chip formation and repeatable results. Tiger‑tec Silver coated carbide Optimised for stainless steel (ISO M) Rhombic 55° shape, 1.2 mm corner radius Negative 0° rake for secure cutting Consistent performance for stainless machining The coated carbide composition of this insert, supplied in the WMP20S grade and finished with Tiger‑tec Silver, is engineered to handle the specific challenges of stainless steel — such as high toughness, tendency to build up material on the edge and elevated cutting temperatures. The coating improves thermal resistance and wear behaviour, which in turn helps to maintain a stable cutting edge over longer cycles. For production environments where repeatable surface quality and predictable tool life matter, this configuration reduces downtime for insert changes and supports a smoother machining rhythm. Geometry and chip control that reduce rework The Rhombus 55° form and the integrated RM5 chipbreaker combine to produce controllable chip shapes during turning operations. The 1.2 mm corner radius and the negative 0° (negative) relief contribute to a secure cutting action that resists deformation of the cutting edge under intermittent loads. These design choices result in fewer built‑up edges and improved surface integrity on machined parts, lowering the risk of subsequent rework and increasing first‑pass yield in batch production. Process reliability and tool selection made simple Selecting this indexable insert for stainless steel applications provides an efficient balance between edge robustness and cutting economy. The coated carbide grade is suited to medium and tougher cutting conditions, delivering process security and consistent results across comparable operations. When pairing the insert with an appropriate toolholder and optimised cutting data, the system supports higher productivity with predictable insert change intervals, making it a practical choice for job shops and production lines alike. Contact Metav Werkzeuge today to discuss application parameters and order the Walter Tools DNMG150612‑RM5 WMP20S turning insert for immediate integration into stainless steel production. Technical data SKU: DNMG150612-RM5-WMP20S-WALTER Designation: DNMG150612-RM5 ISO designation: DNMG150612-RM5 WMP20S Product type: Turning insert Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Size: 15 Corner radius: 1.2 mm Thickness: 06 Relief (rake): 0° (negative) Shape angle: Rhombus 55° Chipbreaker: RM5 Material code: M Special features Coating: Tiger‑tec Silver Grade: WMP20S (coated carbide) Optimised for stainless steel (ISO M) Suitable for medium to robust cutting conditions Rhombic 55° geometry with 1.2 mm corner radius Negative geometry for secure cutting action FAQ What materials is this insert suitable for? The DNMG150612‑RM5 WMP20S is optimised for stainless steel (ISO M); the WMP20S grade supports safe chip formation and stable cutting edges under medium to robust conditions. How does the RM5 chipbreaker affect machining? The RM5 chipbreaker on this insert promotes predictable chip control and reduces the likelihood of long, stringy chips when turning stainless steel, improving process reliability and surface finish. Can this insert be used in light finishing operations? Yes, the rhombic 55° geometry with a 1.2 mm corner radius provides a balance between strength and finish; paired with appropriate feeds and speeds, it can achieve good surface quality while maintaining edge life. Is special tooling required for the negative 0° rake? No specialised holder is required, but toolholders must be compatible with DNMG‑style inserts and correctly set up to exploit the negative geometry for secure cutting performance. What production benefits does the Tiger‑tec Silver coating bring? The Tiger‑tec Silver coating enhances thermal resistance and wear behaviour of the coated carbide grade, which helps to extend edge life and support more consistent cutting performance in stainless steel applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
DNMG150612-RM5 WMP30G RM5 Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the RM5 chipbreaker for consistent machining performance of stainless steel; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. DNMG150612-RM5 WMP30G — indexable turning insert, Tiger·tec Gold, for stainless steel (RM5, 0°) A high-performance DNMG150612-RM5 WMP30G indexable turning insert engineered for medium to robust machining of stainless steel with stable chip control and extended edge life Tiger·tec Gold coating for long tool life Optimised RM5 chipbreaker for secure chips Negative 0° geometry for stable cutting Rhombus 55° form with 1.2 mm corner radius Enhanced productivity through predictable cutting performance The combination of the WMP30G grade and Tiger·tec Gold coating delivers a marked improvement in process stability when machining stainless steel. The coated carbide composition supports a stable cutting edge under elevated temperatures and adhesive wear tendencies typical of these alloys. This translates into longer in-machine intervals, fewer indexings and more predictable tool-change cycles, helping to increase throughput without compromising workpiece tolerances. The result is measurable productivity gains for continuous and batch production alike. Reliable chip control and surface quality for demanding operations Designed with the RM5 chipbreaker and a negative 0° geometry, this insert balances secure chip formation with consistent cutting forces. The chipformer reduces the risk of built-up edge and erratic chip flow that often affect stainless steel machining, while the negative rake promotes robustness in interrupted cuts and higher feed rates. As a consequence, surface finishes remain reproducible and post-process rework is minimised, supporting shorter cycle times and reduced scrap rates on precision components. Flexible tool choice with clear handling advantages The rhombus 55° shape and corner radius 1.2 mm give a versatile edge for turning profiles requiring a blend of strength and contour accuracy. The insert thickness code 06 and inscribed circle size 15 integrate cleanly into standard toolholders, enabling a fast changeover and straightforward tool set-up. Selection of this grade simplifies process planning for stainless steel parts under medium to heavy engagement, while the robust coating and geometry reduce uncertainty in tooling decisions, particularly when the material or process conditions vary. For tailored recommendations on employing the Tiger·tec Gold WMP30G grade from Walter Tools and to arrange prompt supply via Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DNMG150612-RM5-WMP30G-WALTER Article designation: DNMG150612-RM5 WMP30G Product: Turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Facts Inscribed circle: 15 Thickness: 06 Corner radius: 1.2 mm Free cutting edge angle: 0° (negative) Shape: Rhombus 55° Special features Grade: WMP30G (coated carbide, Tiger·tec Gold) Chipbreaker: RM5 Series: Tiger·tec Gold Tolerance class: M Applicable material: stainless steel FAQ What materials is this insert intended for? The DNMG150612-RM5 WMP30G insert is specified for stainless steel and performs well under medium to robust machining conditions. How does the RM5 chipbreaker improve machining? The RM5 chipbreaker on this Walter Tools insert promotes controlled chip formation and reduces the likelihood of built-up edge when cutting stainless steel. Can this insert handle interrupted cuts or heavy engagement? Yes, the negative 0° geometry combined with the Tiger·tec Gold coating provides robustness suitable for interrupted cuts and heavier engagement scenarios. What benefit does the rhombus 55° form offer? The rhombus 55° profile balances access to tight contours with edge strength, and the 1.2 mm corner radius helps maintain surface finish and tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG150612-RM5 WSM20S RM5 Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Silver coated grade and the RM5 chipbreaker for reliable chip control and extended tool life; order the inserts directly via Metav Werkzeuge or ask the consultants for application advice. DNMG150612-RM5 WSM20S rhombic 55° turning insert — Walter Tools The DNMG150612-RM5 WSM20S is a rhombic 55° turning insert designed for machining rostfreier Stahl and heat-resistant alloys, combining a robust coated carbide grade with a dedicated chipbreaker for stable cutting in demanding conditions Tiger·tec Silver coated grade WSM20S For stainless steel and superalloys RM5 chipbreaker for stable chip control Rhombic 55° insert, 1.2 mm corner radius High-temperature stability and reliable edge life for demanding alloys The coated cemented carbide grade Tiger·tec Silver WSM20S was developed for materials that generate heat and challenge edge stability. As a coated cemented carbide grade, it offers improved resistance to temperature and adhesion, which supports a consistent cutting edge during longer tool life. For machining rostfreier Stahl (ISO group M) and nickel- or cobalt-based superalloys (ISO group S), the combination of coating technology and tailored substrate reduces the risk of premature wear and helps maintain component tolerances in production environments. Controlled chip formation and reduced built-up edge for safer machining The insert’s RM5 chipbreaker ensures stable chip control, lowering the chance of long, tangled chips and improving swarf evacuation at moderate feeds. The dedicated chip geometry promotes predictable fragmentation, which supports machining continuity and reduces interruptions for manual chip clearing. In combination with the negative 0° relief angle, the insert delivers a robust cutting edge that tolerates interrupted cuts and heavy radial engagement while limiting the formation of a built-up edge on ductile alloys. Geometry that balances strength and surface quality The Rhombic 55° form provides flexibility across facing and turning operations, enabling use in general-purpose turning holders and certain finish cuts. The 1.2 mm corner radius enhances edge strength and contributes to a consistent surface finish when used within recommended parameters. The insert thickness 06 and the standard DNMG footprint allow reliable clamping and repeatable positioning in established toolholders, supporting quick changeovers and predictable machining results. Application guidance for industrial production and process security Designed for the ISO groups M and S, the insert supports machining regimes where heat and work-hardening are concerns. The Tiger·tec Silver series emphasises process reliability and wear resistance, helping to reduce downtime and deliver repeatable component quality. Where tool life and consistent surface integrity matter, this insert provides a pragmatic balance between productivity and safety of the cutting edge in serial and batch production environments. Contact Metav Werkzeuge for tailored application advice and to secure the DNMG150612-RM5 WSM20S insert from Walter Tools; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: DNMG150612-RM5-WSM20S-WALTER Article: Drehwendeschneidplatte DNMG150612-RM5 WSM20S Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Insert size: 15 mm Corner radius: 1.2 mm Relief angle: 0° (negative) Plate thickness: 06 Tolerance class: M Special features Grade: WSM20S Chipbreaker: RM5 Plate form: Rhombus 55° Substrate/coating technology: Tiger·tec Silver (coated carbide) Material suitability: rostfreier Stahl (ISO M), heat-resistant alloys/titanium (ISO S) Execution: G FAQ What materials is this insert suitable for? The DNMG150612-RM5 WSM20S insert is specified for rostfreier Stahl (ISO group M) and heat-resistant superalloys or titanium alloys (ISO group S), reflecting the WSM20S grade’s heat resistance and edge stability. How does the RM5 chipbreaker affect machining performance? The RM5 chipbreaker promotes consistent chip fragmentation and evacuation, improving process security and reducing the likelihood of chip-related interruptions when machining ductile or work-hardening materials. Is the insert suitable for interrupted cuts and heavy engagement? Yes; the negative 0° relief angle and the robust geometry provide a secure cutting edge that tolerates interrupted cuts and heavier radial loads while maintaining edge integrity. What advantages does the rhombic 55° form and 1.2 mm radius offer? The Rhombic 55° shape offers versatility across turning operations, and the 1.2 mm corner radius increases edge strength for stable tool life and good surface finish when used within recommended parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names such as Walter Tools are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
DNMG150612-RM5 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WSM30S grade for secure chip control and extended edge life in demanding turning operations; the negative 0° clearance and RM5 chipbreaker combine to deliver consistent performance when machining stainless steel and heat-resistant alloys. Order the DNMG150612-RM5 WSM30S directly via Metav Werkzeuge or ask the consultants for cutting data and application support. DNMG150612-RM5 WSM30S turning insert — Tiger·tec Silver, for stainless steel (Walter Tools) The DNMG150612-RM5 WSM30S is a rhombic 55° indexable turning insert designed for heavy-duty and difficult-to-machine materials, optimised for stable chip formation and long tool life Tiger·tec Silver coating for edge protection RM5 chipbreaker for secure chip control Suited to stainless steel and superalloys Rhombus 55° form with 1.2 mm corner radius High-performance coating and grade for consistent cuts The coated carbide grade WSM30S, part of the Tiger·tec Silver series, is engineered for demanding turning tasks. Its multilayer coating improves edge resistance and reduces wear during extended cuts, which results in more predictable tool life and fewer interventions on the machine. For machining stainless steel and heat-resistant superalloys, the combination of coating and substrate supports stable cutting forces and helps to avoid built-up edge formation, contributing to repeatable surface quality and process reliability. Geometry and chip control that stabilise the process The insert’s rhombus 55° shape with a 1.2 mm corner radius and a negative 0° relief angle provides secure engagement and rigidity in interrupted or shoulder turning. The RM5 chipbreaker is tailored to produce manageable chips in sticky, tough materials; this reduces the risk of entanglement and improves swarf evacuation. The design code includes a thickness index of 06 and a nominal size of 15, ensuring compatibility with standard toolholders while offering the mechanical support required for medium to heavy cut depths. Practical benefits for production and workshop efficiency Using an insert from the Tiger·tec Silver family streamlines machining of stainless steel and superalloys by reducing downtime associated with frequent tool changes and rework. Stable cutting edges and predictable wear patterns mean planning tool life becomes simpler, which benefits cycle time and cost-efficiency. For customers requiring adjustments to cutting data or verification of clamping systems, technical consultations are available to ensure the insert integrates smoothly into existing turning setups and achieves the intended surface finish and dimension tolerance. Contact Metav Werkzeuge for tailored cutting parameters and fast supply of Walter Tools Tiger·tec Silver inserts — specialists are available to advise on the DNMG150612-RM5 WSM30S for stainless steel applications Technical data Article number: DNMG150612-RM5-WSM30S-WALTER Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM30S Designation: DNMG150612-RM5 SKU: DNMG150612-RM5-WSM30S-WALTER Measured values Plate size: 15 Thickness code: 06 Corner radius: 1.2 mm Relief angle: 0° (negative) Tolerance class: M Special features Coating technology: Tiger·tec Silver Chipbreaker: RM5 Material suitability: stainless steel, heat-resistant superalloys and titanium (S / M) Plate form: Rhombus 55° Application focus: secure chip formation and stable cutting edge FAQ What materials is this insert suitable for? The DNMG150612-RM5 WSM30S insert (Walter Tools, Tiger·tec Silver) is specified for stainless steel and heat-resistant superalloys, offering good performance where edge stability under heat is required. How does the RM5 chipbreaker influence machining? The RM5 chipbreaker on this turning insert improves chip control for sticky and tough materials, helping to avoid long stringing chips and promoting safer swarf removal during turning operations. Which toolholder types fit this rhombic 55° insert? Standard DIN/ISO toolholders designed for rhombic 55° indexable inserts are compatible with the DNMG150612-RM5 geometry; the thickness code and seat design should match the holder specification. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation and identification purposes. There is no affiliation between our company and the named brands. The item offered is an original, factory-new product of the manufacturer (Walter Tools).
DNMG150612-RP5 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKK20S grade for consistent tool life and efficient cast iron machining; order directly via Metav Werkzeuge or consult the technical team for application support. DNMG150612-RP5 WKK20S indexable turning insert, Rhombus 55° / 1.2 mm corner radius — Walter Tools The DNMG150612-RP5 WKK20S is a coated carbide indexable turning insert engineered for productive turning of cast iron, combining a robust chipbreaker with a stable cutting edge for general turning operations. Tiger·tec Silver coating Optimised for cast iron machining Rhombus 55° insert form 1.2 mm corner radius Delivering reliable productivity with advanced coating technology The Tiger·tec Silver coating and the WKK20S grade provide a balance between wear resistance and toughness, which translates into longer tool life and fewer indexings. This coated carbide formulation is tuned for the abrasive nature and short, breaking chips typical of cast iron; as a result, the machining process benefits from consistent cutting performance and reduced downtime. The concrete advantage is higher process stability in serial production, with predictable tool-change intervals and a reliable surface finish on workpieces. Clear advantages when machining cast iron Designed specifically for grey and nodular cast iron, the insert’s RP5 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of built-up edge and erratic chip flow. The negative rake (0°) geometry contributes to stronger cutting-edge support under interrupted cuts, making the solution particularly suitable for roughing and medium turning operations. The technical setup therefore yields a favourable cost-to-performance ratio through fewer tool failures and improved cycle-time consistency. Geometry that aids handling and application flexibility The Rhombus 55° form and 1.2 mm corner radius deliver a versatile cutting edge for a range of turning profiles while maintaining strength at the corner. The compact size specification supports installation in common DNMG toolholders, allowing straightforward retrofitting into existing tool systems. The combination of form, radius and chipbreaker provides predictable tool behaviour, simplifying process planning and reducing the need for frequent parameter adjustments during batch production. Discuss the Walter Tools DNMG150612-RP5 WKK20S Tiger·tec Silver indexable insert with Metav Werkzeuge to optimise cast iron turning operations and receive tailored application advice Technical data Article number: DNMG150612-RP5-WKK20S-WALTER Label: Drehwendeschneidplatte DNMG150612-RP5 WKK20S Walter Tools Type: indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKK20S Facts Insert size: 15 Corner radius: 1.2 mm Thickness: 06 Free rake angle: 0° (negative) Insert form: Rhombus 55° Tolerance class: M Special features Coating: Tiger·tec Silver Chipbreaker: RP5 Suitable material group: cast iron Execution: G Designation: DNMG150612-RP5 WKK20S FAQ Which materials is this insert intended for? The DNMG150612-RP5 WKK20S from Walter Tools is designed for machining cast iron, with the coating and chipbreaker optimised for abrasive, short-chipping cast materials. How does the RP5 chipbreaker influence chip control? The RP5 chipbreaker on the WKK20S grade promotes short, manageable chips during cast iron turning, reducing entanglement and improving surface integrity. Is the insert suitable for interrupted cuts? Yes; the 0° negative rake and robust geometry make this insert appropriate for interrupted and heavy engagement turning in cast iron applications. What are the geometric specifications to consider when selecting a toolholder? Key dimensions include the Rhombus 55° form, size 15, thickness 06 and a 1.2 mm corner radius; the insert fits standard DNMG-compatible toolholders. Can this grade be used for finishing passes? While optimised for general and tougher turning operations in cast iron, the grade’s balance of wear resistance and toughness can deliver acceptable finishing results depending on cutting parameters and machine stability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
DNMG150612-RP5 WPP05G WPP05G Wendeplatten - Walter Tools
The combination of a Tiger·tec Gold coating and the WPP05G grade ensures high wear resistance and stable chip formation for steel turning, while the RP5 chipbreaker and 1.2 mm corner radius deliver consistent surface quality under demanding conditions; order the DNMG150612-RP5 WPP05G indexable turning insert directly via Metav Werkzeuge or contact the consultants for tailored advice. DNMG150612-RP5 WPP05G indexable turning insert — Tiger·tec Gold, Walter Tools The DNMG150612-RP5 WPP05G is an indexable turning insert designed for reliable steel machining, offering a Tiger·tec Gold coating and an RP5 chipbreaker for controlled chip flow. Tiger·tec Gold coated carbide grade WPP05G RP5 chipbreaker for stable chip control 1.2 mm corner radius for robust finishing Negative 0° clearance for heavy cuts Efficient performance with proven coating technology The combination of the Tiger·tec Gold coating and the WPP05G carbide grade provides a balance between wear resistance and toughness specifically tailored for steel machining. This coating reduces friction at the cutting edge, which in turn lowers heat generation and extends tool life, enabling longer uninterrupted production runs. The result is higher process efficiency and fewer insert changes, which supports cost-effective machining cycles without compromising component quality. Predictable chip control and surface reliability The RP5 chipbreaker is engineered to produce short, controlled chips during common turning operations on steel, reducing the risk of chip entanglement and improving swarf handling. Combined with the insert’s rhombus 55° geometry and 1.2 mm corner radius, the system offers a predictable cutting behaviour that helps maintain a consistent surface finish while enabling stable depths of cut. This predictability contributes to reduced rework and improved reproducibility across batches. Robust geometry for heavy and interrupted cuts The negative 0° clearance geometry and the insert thickness designation make this grade suitable for demanding turning operations where edge strength is critical. The rhombus 55° shape allows access to a wide range of turning profiles and the reinforced corner radius increases resistance to mechanical shock during interrupted cuts. Together, these design choices support stable machining under higher feed and depth conditions, improving machining throughput and component delivery times. Practical application guidance and material suitability This insert is specified for the P-group — steel — and is intended for typical steel thermal and chip-formation characteristics. When selecting cutting parameters, the wear-resistant Tiger·tec Gold treatment permits elevated cutting speeds compared with uncoated grades, but optimal feeds and depths remain dependent on machine rigidity and workpiece clamping. For reliable set-up and parameter selection, consult Metav Werkzeuge’s technical advisors to align speeds and feeds with the desired balance of productivity and finish quality. Contact Metav Werkzeuge for tailored cutting data, availability and application support for the Walter Tools DNMG150612-RP5 WPP05G insert — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance. Technical data SKU: DNMG150612-RP5-WPP05G-WALTER Label: Drehwendeschneidplatte DNMG150612-RP5 WPP05G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP05G Facts Corner radius: 1.2 mm Size: 15 mm Clearance angle: 0° Thickness: 06 Tolerance class: M Special features Chipbreaker: RP5 Plate form: Rhombus 55° Coating technology: Tiger·tec Gold Suitable material group: P (steel) Execution: G FAQ What materials is this insert intended for? The DNMG150612-RP5 WPP05G indexable turning insert is specified for the P material group and is optimised for machining steel. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WPP05G grade reduces friction and improves wear resistance, which helps to extend tool life and maintain stable cutting performance in steel turning. Which chip control can be expected with the RP5 breaker? The RP5 chipbreaker produces short, manageable chips under typical steel turning conditions, enhancing safety and swarf evacuation in continuous or automated processes. Is the DNMG150612-RP5 WPP05G suitable for interrupted cuts? Yes; the negative 0° clearance and 1.2 mm corner radius provide increased edge strength that supports interrupted and heavy cutting conditions. Where to obtain cutting data and support for this insert? Metav Werkzeuge can provide tailored cutting parameters and application guidance for the Walter Tools DNMG150612-RP5 WPP05G insert. Manufacturer: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com