ADMT10T330R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Reliable productivity and extended tool life result from the combination of Tiger·tec Gold coating and the WSM35G grade, delivering stable chip formation when machining stainless steel and heat‑resistant superalloys; order the ADMT10T330R‑F56 WSM35G milling insert via Metav Werkzeuge or contact our consultants for application guidance. ADMT10T330R-F56 WSM35G milling insert – Tiger·tec Gold, Walter Tools The ADMT10T330R-F56 WSM35G is a parallelogram 85° milling insert designed for demanding operations on stainless steel and high‑temperature superalloys, combining wear resistance with reliable edge stability. Tiger·tec Gold coating for high wear resistance Suitable for stainless steel and superalloys Parallelogram 85° geometry for stable cutting Corner radius 3 mm for robust edge strength Consistent performance for hard‑to‑machine materials The combination of the WSM35G grade and Tiger·tec Gold technology provides a wear‑resistant cutting edge that supports stable chip formation under thermal and mechanical stress. This indexable insert is engineered to resist abrasive and adhesive wear, which helps preserve cutting geometry over longer cycles. For production environments where material properties induce heat build‑up — notably stainless steel and heat‑resistant alloys — the coated substrate balances hardness and toughness to reduce the risk of premature edge breakdown while maintaining productivity. Geometry that improves process reliability and surface quality The Parallelogram 85° form and corner radius 3 mm create a controlled engagement with the workpiece, lowering vibration and distributing cutting forces across a robust edge. The 15° free clearance and T3 thickness contribute to secure clamping and repeatable insert positioning. The integrated F56 chipbreaker assists in breaking and evacuating chips reliably, which in turn reduces rework and downtime. These geometric characteristics translate into a measurable improvement in surface finish and a decrease in unexpected tool changeovers. Application scope and machining advantages Certified for ISO groups M and S, this insert is suitable for stainless steel as well as heat‑resistant superalloys and titanium alloys where thermal stability and edge integrity are critical. The grade is optimised to handle the poor thermal conductivity and work‑hardening tendencies of such materials, thereby improving process security in series production and in specialised component manufacturing. For workshops and contract manufacturers focused on repeatable results, the insert supports tighter tolerances and consistent part quality. Operational benefits and economic rationale By offering a combination of a coated hardmetal grade and a robust geometry, the insert reduces frequency of index changes and supports stable tool life — translating into lower tooling costs per part and higher machine utilisation. The indexable format enables rapid replacement and minimal setup interruption, while the reliable chip control reduces secondary finishing. Backed by Walter Tools’ established design principles, this solution supports both small batches and larger production runs seeking predictable outcomes and efficient use of resources. For tailored advice and to secure the ADMT10T330R‑F56 WSM35G milling inserts with Tiger·tec Gold performance, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for application support and ordering assistance Technical data SKU: ADMT10T330R-F56-WSM35G-WALTER Article designation: ADMT10T330R-F56 WSM35G Product type: Milling insert / indexable insert Manufacturer: Walter Tools Facts Corner radius: 3 mm Free clearance: 15° Plate size: 10 Thickness: T3 Plate form: Parallelogramm 85° Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WSM35G Material groups: S / M Chipbreaker: F56 Application: stainless steel; heat‑resistant superalloys and titanium (ISO M and S) Robust design for stable chip formation and edge life Brand: Walter Tools FAQ What materials is this insert suitable for? The ADMT10T330R‑F56 WSM35G milling insert is intended for stainless steel (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), offering thermal stability and controlled chip formation. How does the Tiger·tec Gold coating benefit cutting performance? The Tiger·tec Gold coating on the WSM35G grade enhances wear resistance and heat tolerance, which extends edge life and improves process reliability when machining demanding materials. What is the effect of the Parallelogram 85° geometry? The Parallelogram 85° form provides a stable cutting attitude and reduced vibration, helping to achieve consistent surface quality and prolonging the service life of the insert. Is the insert compatible with standard toolholders? This indexable milling insert follows common dimensions for its designation ADMT10T330R‑F56 and is compatible with matching Walter Tools toolholders designed for the same insert geometry. Which chipbreaker is integrated and what is its advantage? The integrated F56 chipbreaker promotes reliable chip control and evacuation, reducing the risk of rework and improving cycle stability in continuous machining operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT10T330R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Compact, wear‑resistant milling performance is provided by the combination of the Tiger·tec Gold coating and the WSP45G grade, delivering reliable chip control across steel, stainless steel and heat‑resistant alloys; the parallelogram 85° form with a 15° relief angle and R3 corner adds cutting stability and edge strength. Order the ADMT10T330R-F56 WSP45G milling insert directly via Metav Werkzeuge or ask our consultants if needed. ADMT10T330R-F56 WSP45G milling indexable insert — Tiger·tec Gold, P / M / S, 15° relief — Walter Tools The ADMT10T330R-F56 WSP45G is a Tiger·tec Gold coated milling insert designed for versatile roughing and finishing operations on steel, stainless steel and heat‑resistant alloys in industrial milling applications. Tiger·tec Gold PVD coating Suitable for steel, stainless and superalloys Parallelogram 85° form for stable cutting 15° relief and R3 corner for robust edge Proven efficiency and consistent process security The combination of a modern Tiger·tec Gold coating and the WSP45G grade targets high productivity with stable chip formation. The PVD coating enhances wear resistance and thermal stability, which means longer edge life under cyclic loads and elevated temperatures. For machining operations where cycle time and repeatability matter, this results in fewer tool changes and more predictable component quality, supporting a smoother production flow and reduced downtime. Coating and grade explained for reliable material handling The WSP45G grade is a PVD‑coated cemented carbide designed specifically for milling applications across the ISO groups P, M and S. In practice this means suitability for unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys or titanium. The coating reduces built‑up edge and improves heat resistance; the substrate ensures the cutting edge withstands the mechanical stresses typical of interrupted cuts. This balance provides consistent performance when switching between roughing and finishing passes. Design details that support stable cutting and easy process integration The insert’s parallelogram 85° geometry promotes secure seat support and favourable cutting angles for axial milling, while the 15° relief angle reduces rubbing at the flank and helps maintain a sharp contact zone. The R3 corner radius offers a compromise between edge strength and surface finish capability, making the grade suitable for both higher material removal rates and quality face generation. The F56 chipbreaker facilitates controlled chip evacuation, reducing rework and tool interference in multi‑pass routines. Practical handling and application advice The insert thickness T3 and its defined tolerance class M ensure compatibility with standard toolholders designed for this family, aiding quick changeover and consistent set‑up. When programming feeds and speeds, consider the P / M / S applicability: use more conservative cutting data for stainless and superalloys to benefit the coating and substrate life; for plain steels, higher cutting speeds can be exploited for improved productivity. The result is an adaptable solution for shops requiring flexibility without sacrificing process security. Contact Metav Werkzeuge for tailored cutting data and stock information on the Walter Tools ADMT10T330R-F56 WSP45G insert or to discuss application optimisation for specific materials Technical Data SKU: ADMT10T330R-F56-WSP45G-WALTER Article: ADMT10T330R-F56 WSP45G Type: Milling indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WSP45G Facts Free angle: 15° Corner radius: R3 Shape: Parallelogram 85° Size: 10 Thickness: T3 Tolerance class: M Chipbreaker: F56 Special features Coating: Tiger·tec Gold (PVD coated cemented carbide) Material applicability: P / M / S Application: Versatile milling of steel, stainless steel and heat‑resistant alloys Edge form: Robust cutting edge for stable chip formation FAQ What materials is this insert suited for? The ADMT10T330R-F56 WSP45G insert from Walter Tools is specified for ISO groups P (steel), M (stainless steel) and S (heat‑resistant alloys/titanium), enabling broad workshop flexibility. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold PVD coating increases wear resistance and thermal stability on the ADMT10T330R-F56 WSP45G, extending edge life and supporting higher productivity in cyclic or thermally demanding milling operations. What does the parallelogram 85° shape deliver in practice? The parallelogram 85° geometry provides secure seating and favourable cutting orientation for axial milling, improving stability and reducing chatter compared with less supported shapes. Is the R3 corner radius suitable for finishing passes? Yes, the R3 corner balances edge strength and surface finish; it is suitable for both heavier stock removal and quality finishing when the machining strategy is adjusted accordingly. Which chipbreaker should be used for mixed material runs? The integrated F56 chipbreaker on this grade is engineered for controlled chip formation across P / M / S materials, helping to avoid entanglement and easing chip evacuation during mixed‑material batches. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT10T332R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of a proven combination of durable coated-carbide grade and precise geometry for consistent, productive milling in steel and cast iron. The reliable chip control and 85° parallelogram form support stable clamping and predictable tool life. Order directly via Metav Werkzeuge or ask the consultants for application-specific advice. ADMT10T332R-F56 WKP35S milling insert — for steel and cast iron, Tiger·tec Silver The ADMT10T332R-F56 WKP35S is a parallelogram indexable milling insert designed for productive milling of steel and cast iron components, combining a Tiger·tec Silver coating with a dedicated chipbreaker for improved process security. Tiger·tec Silver coated carbide grade WKP35S Optimised chip control with F56 chipbreaker Parallelogram 85° geometry for secure clamping Suitable for steel and cast iron machining Faster, more predictable machining with a coated carbide grade The combination of the WKP35S grade and the Tiger·tec Silver coating delivers measurable improvements in thermal and mechanical resistance during milling. The coated-carbide construction is engineered for the typical heat generation and chip forms encountered when machining steel and cast iron, so the result is reduced flank wear and longer edge life. For production environments where cycle time and repeatability matter, this material- and coating pairing supports higher cutting parameters while maintaining surface integrity. Consistent chip control and stable cutting edges The dedicated F56 chipbreaker and the insert’s geometry ensure predictable chip formation and evacuation. Controlled chips lower the risk of interruptions and secondary damage to the workpiece or tool, which in turn reduces scrap rates and machine downtime. The insert’s 3.2 mm corner radius contributes to robust edge strength, making it suitable for interrupted cuts and less forgiving applications without sacrificing surface finish quality. Secure clamping geometry for reliable toolholding The parallelogram 85° plate form provides a compact contact area that improves positional stability in the cutter body. This geometry, combined with the specified 15° relief angle, promotes consistent seat contact and repeatable pocket fitment, supporting high process security in serial production. The result is a lower requirement for frequent re-adjustment and a smoother integration into automated tool-change routines. Application focus: where productivity meets versatility Designed primarily for the ISO groups P and K, the insert is applicable to both steel and cast iron machining tasks. Its T3 thickness and medium tolerance class M make it a versatile choice across a wide range of milling operations, from roughing to semi-finishing, depending on cutter and parameter selection. For shops aiming to streamline tooling families, this insert provides a balanced option that covers common workpiece materials without the need for specialised grades per job. Contact Metav Werkzeuge today for tailored advice on implementing the ADMT10T332R-F56 WKP35S insert in production — Metav Werkzeuge; info@metav-werkzeuge.com; +49 2822 7131930 Technical data Article number: ADMT10T332R-F56-WKP35S-WALTER Label: Fräswendeschneidplatte ADMT10T332R-F56 WKP35S Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Silver Facts Relief angle: 15° Corner radius: 3.2 mm Plate size: 10 mm Plate thickness: T3 Tolerance class: M Special features Grade: WKP35S Chipbreaker: F56 Plate form: Parallelogram 85° Applicable material groups: P (steel), K (cast iron) Construction: coated carbide (beschichtetes Hartmetall) Execution: T FAQ What materials is this insert suitable for? The ADMT10T332R-F56 WKP35S insert is designed for ISO groups P and K, meaning it is suitable for machining steel and cast iron. How does the Tiger·tec Silver coating benefit performance? The Tiger·tec Silver coating on the WKP35S grade enhances thermal resistance and reduces wear, enabling higher cutting parameters and longer edge life in the ADMT10T332R-F56 application. Which chipbreaker is integrated and what advantage does it offer? The insert features an F56 chipbreaker, which improves chip control and evacuation, reducing the risk of workpiece damage and interruptions during milling. Is the geometry suitable for interrupted cuts and heavy engagement? Yes; the 3.2 mm corner radius and the parallelogram 85° form provide strong edge integrity and secure clamping, making the insert resilient in interrupted and heavy-cut scenarios. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT10T332R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WSM35G grade and a 3.2 mm corner radius for stable machining of tough materials; this milling insert delivers long tool life and secure chip formation for rostfreier Stahl and high-temperature alloys. Order the part directly via Metav Werkzeuge or consult the specialists for tailored process advice. ADMT10T332R-F56 WSM35G milling insert – Tiger·tec Gold, 3.2 mm corner radius, Walter Tools ADMT10T332R-F56 WSM35G is a Tiger·tec Gold coated milling insert designed for demanding applications in rostfreier Stahl and heat-resistant superalloys, offering robust cutting-edge stability in roughing and medium-finishing operations Tiger·tec Gold coating for long tool life Optimised for rostfreier Stahl and superalloys Parallelogram 85° form, 3.2 mm corner radius Extended life through advanced coating technology The combination of Tiger·tec Gold and the WSM35G cemented carbide substrate provides a balanced mix of wear resistance and edge toughness. This coating system reduces flank wear and supports repeatable performance in high-temperature cutting, which results in fewer index changes and lower overall tooling costs. The described coating technology is particularly beneficial when machining materials that promote adhesive wear or rapid heat build‑up, ensuring consistent tool life under industrial cycle loads. Reliable chip control for demanding materials With a dedicated F56 chipbreaker and suitability for material classes S and M, the insert ensures controlled chip formation when working with rostfreier Stahl and superalloys. These materials tend to form long, stringy chips and generate heat; the specified chipbreaker helps break chips into manageable segments and guides them away from the cutting zone. The result is improved process security, reduced risk of recutting, and a more stable surface finish during sustained machining cycles. Geometry optimised for secure clamping and cutting The insert’s Parallelogram 85° shape and a 3.2 mm corner radius combine to give a stable cutting edge and predictable engagement with the workpiece. The 15° clearance angle supports positive cutting action while minimising contact with the flank, and the T3 thickness contributes to edge strength under interrupted cuts. These geometric choices lower the likelihood of edge chipping during heavy cuts and promote repeatable dimensional accuracy across batches. Application scope and process benefits for production environments Engineered for industrial milling operations, the insert suits roughing and semi-finishing where high material removal rates are required alongside reliable tool life. The WSM35G grade is tailored for applications where heat resistance and edge stability are priorities; using this insert can lead to fewer tool changes, more predictable cycle times, and improved component throughput. Integration into standard ISO toolholders that accept the ADMT form factor enables straightforward adoption into existing toolsets without process redesign. Contact Metav Werkzeuge for specific cutting data, compatibility checks and availability of Walter Tools ADMT10T332R-F56 WSM35G milling inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for fast, application-oriented support Technical Data Article number: ADMT10T332R-F56-WSM35G-WALTER Designation: ADMT10T332R-F56 WSM35G Manufacturer: Walter Tools Facts Corner radius: 3.2 mm Clearance angle: 15° Insert size: 10 Thickness: T3 Shape: Parallelogram 85° Chipbreaker: F56 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WSM35G Coating: Tiger·tec Gold coating technology Suitable for: rostfreier Stahl (M), superalloys / heat-resistant alloys (S) Execution: T FAQ What materials is this insert designed to machine? The ADMT10T332R-F56 WSM35G milling insert is designed for rostfreier Stahl (material group M) and heat-resistant superalloys (material group S), with the WSM35G grade optimised for thermal stability and secure chip formation. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating on the ADMT10T332R-F56 reduces flank wear and increases edge resistance at elevated cutting temperatures, resulting in longer tool life and fewer index changes in continuous production. What milling operations suit this insert best? This indexable insert is suitable for roughing and semi-finishing operations where material removal and edge stability are required, particularly in rostfreier Stahl and high-temperature alloys. Which geometric features improve machining reliability? The Parallelogram 85° form combined with a 3.2 mm corner radius and a 15° clearance angle provides stable engagement, reduced edge stress during interrupted cuts, and predictable dimensional results. Is the chip control suitable for long-chip-forming materials? Yes, the F56 chipbreaker integrated in the ADMT10T332R-F56 WSM35G insert is engineered to break and eject chips effectively when machining long‑chip materials such as rostfreier Stahl and superalloys. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered marks are cited solely for explanatory purposes; there is no affiliation between our company and the listed brands. The offered article is an original, brand‑new product of the manufacturer.
ADMT10T332R-F56 WSM45X T Wendeplatten - Walter Tools
Take advantage of the combination of a heat-resistant, coated carbide grade and a stabilising geometry that ensures reliable chip control and consistent lifetime in demanding materials; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. ADMT10T332R-F56 WSM45X – indexable milling insert, 15° relief, 3.2 mm corner radius (Walter Tools) The ADMT10T332R-F56 WSM45X is an indexable milling insert engineered for machining stainless steel and high-temperature alloys in demanding production environments Coated carbide grade WSM45X Designed for stainless steel and superalloys Parallelogram 85° with 3.2 mm corner radius Chipbreaker F56 for controlled chip formation Proven performance with challenging materials The insert’s WSM45X coating and carbide substrate deliver a balance of wear resistance and toughness that supports productive machining of stainless steel and heat-resistant superalloys. The combination of a wear-optimised grade and a dedicated chipbreaker F56 reduces the risk of built-up edge and promotes stable chip flow, which translates into fewer interruptions and longer effective tool life. For operations where thermal loading and material adhesion are major concerns, this grade helps maintain consistent cutting behaviour and component quality. Geometry designed for stability and predictable results A parallelogram 85° form, 15° relief angle and 3.2 mm corner radius provide the mechanical stability required during heavy engagement cuts while still allowing acceptable surface finishes in semi-finish passes. The T3 plate thickness contributes to vibration damping and secure clamping in standard toolholders. Together, these features reduce flank wear and support repeatable dimensional accuracy, making the insert suitable for production runs where process reliability is paramount. Coating and grade advantages for productivity The coated WSM45X grade is formulated for thermal resistance and stable edge retention under the stresses typical of difficult-to-cut alloys. Coating properties support lower friction at the cutting zone and improved resistance to micro-welding on the edge, which helps to preserve sharpness and reduce edge chipping. The result is a measurable improvement in cycle-time consistency and a reduction in scrap rates when machining components from challenging alloys. Practical application guidance and handling The insert is best applied where secure chip control and edge stability are needed—typical uses include roughing and mixed rough/finish passes in stainless steel and nickel- or cobalt-based alloys. The indexable milling insert is replaced when wear criteria are reached rather than reconditioned; this keeps setups predictable and downtime minimal. For process setup, pair the insert with rigid holders and moderate depths of cut to exploit the geometry; adapt speeds and feeds to the chosen machine and workpiece clamping to avoid excessive heat build-up. Contact Metav Werkzeuge for tailored process recommendations and to secure genuine Walter Tools inserts for immediate delivery; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: ADMT10T332R-F56-WSM45X-WALTER Product: Fräswendeschneidplatte (indexable milling insert) Brand: Walter Tools Grade: WSM45X Chipbreaker: F56 Series: Walter Schneidstoffsorte - Serie offen Facts Relief angle: 15° Corner radius: 3.2 mm Plate form: Parallelogram 85° Plate size: 10 Plate thickness: T3 Tolerance class: M Special features Coated carbide material Suitable for stainless steel (ISO group M) Suitable for high-temperature superalloys and titanium (ISO group S) Stable chip formation and improved edge life Designed for productive machining and process reliability FAQ What materials is this insert optimised for? The ADMT10T332R-F56 WSM45X insert is optimised for stainless steel and heat-resistant superalloys; the WSM45X grade supports secure chip formation and edge stability in these groups. How does the F56 chipbreaker influence machining? The F56 chipbreaker shapes and controls chip flow to prevent long, stringy chips and to reduce the likelihood of built-up edge when machining challenging alloys. Which geometric features support dimensional stability? The parallelogram 85° form, 15° relief angle and 3.2 mm corner radius contribute to mechanical rigidity and predictable cutting forces during heavy engagement cuts. Is this insert suitable for finishing passes? Depending on the holder and cutting parameters, the insert can be used for semi-finish and certain finishing operations; smaller depths of cut and optimised feeds improve surface quality. What is the correct way to replace and index the insert? Replace the insert when wear limits are reached; ensure the seating and clamping surfaces are clean and the toolholder torque specifications are respected to maintain repeatability. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
ADMT10T332R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold grade and the positive geometry of this milling insert for consistent productivity and extended tool life; its WSP45G PVD-coated carbide ensures stable cutting edges across steel, stainless steel and heat-resistant alloys. Order the ADMT10T332R-F56 WSP45G directly via Metav Werkzeuge or request application advice from the consultants. ADMT10T332R-F56 WSP45G milling insert – Walter Tools (Tiger·tec Gold, for steel, stainless and superalloys) ADMT10T332R-F56 WSP45G is a parallelogram-shaped milling insert engineered for versatile milling of steels, stainless steel and heat-resistant superalloys in demanding production environments Tiger·tec Gold PVD-coated grade WSP45G Suitable for steel, stainless and superalloys Parallelogram 85° with 3.2 mm corner radius Positive 15° relief and T3 thickness Consistent high-performance cutting with Tiger·tec Gold The insert delivers reliable wear resistance thanks to the Tiger·tec Gold coating and the WSP45G grade, a PVD-coated carbide designed for milling. This combination reduces flank wear and extends edge life under the thermal and mechanical loads typical of machining steels and alloys. As a result, machining cycles benefit from longer tool life and more predictable regrinding intervals, which supports stable production planning and lower per-part tooling cost. The positive geometry and coating strategy are tuned for balanced cutting forces and thermal resistance. Stable chip control and improved surface quality The integrated F56 chipbreaker and the parallelogram 85° geometry promote controlled chip formation and evacuation, which minimises built-up edge and improves surface finish on the workpiece. The 3.2 mm corner radius provides a robust cutting edge for interrupted cuts and roughing, while the 15° relief angle reduces friction at the contact zone. These features combine to lower the risk of edge chipping and to keep cutting forces within acceptable ranges, leading to consistent dimensional accuracy and a reduced need for rework. Broad material compatibility for versatile production Designed for the ISO groups P / M / S, the grade suits unalloyed and alloyed steel, stainless steel and heat-resistant superalloys or titanium. The WSP45G grade is optimised for the typical heat generation and chip behaviour of these materials, supporting secure chip formation and edge stability. This versatility makes the insert suitable for job-shop environments and production lines that handle mixed batches, enabling fewer tool variants and simpler inventory management. Practical geometry and integration in milling systems The insert’s designation and form—ADMT10T332R-F56—indicate a compact profile with 10 mm size and T3 thickness for robust clamping and stability in standard toolholders. The M tolerance class ensures reproducible seating and repeatable positioning during index changes. The positive cutting angles and the well-defined chipbreaker reduce cutting forces, which can enable higher cutting parameters in stable setups and therefore improved removal rates. Integration into existing toolholders is straightforward, and the insert is suited to both finishing and roughing tasks where a balance of edge life and surface quality is required. Contact Metav Werkzeuge for application advice and availability of the ADMT10T332R-F56 WSP45G Tiger·tec Gold insert — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: ADMT10T332R-F56-WSP45G-WALTER Designation: ADMT10T332R-F56 WSP45G Series: Tiger-tec Gold Grade: WSP45G Manufacturer: Walter Tools Core specifications Size: 10 mm Corner radius: 3.2 mm Relief angle: 15° Thickness: T3 Tolerance class: M Design and features Parallelogram 85° insert form Chipbreaker: F56 Material group applicability: P / M / S Positive geometry, suited for milling applications Coating: Tiger·tec Gold (PVD-coated carbide) FAQ What materials can be machined with this insert? The ADMT10T332R-F56 WSP45G insert is specified for ISO groups P, M and S, meaning it is suitable for steel, stainless steel and heat-resistant superalloys or titanium. Which grade and coating are used on the insert? The insert uses the WSP45G grade within the Tiger·tec Gold PVD-coated family to provide a balance of wear resistance and edge stability for milling. What is the geometry and size of the insert? The insert is a parallelogram 85° type with a 10 mm size, T3 thickness and a 3.2 mm corner radius, optimised for robust performance in milling operations. Is this insert suitable for interrupted cuts and roughing? Yes, the 3.2 mm corner radius and positive geometry make the ADMT10T332R-F56 WSP45G appropriate for interrupted cuts and roughing where edge strength and chip control are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT120404R-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WKP35G grade for extended tool life and consistent chip control; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. ADMT120404R-F56 WKP35G milling indexable insert – for steel & cast iron | Walter Tools The ADMT120404R-F56 WKP35G is a parallelogram 85° milling indexable insert engineered for robust and productive machining of steel (P) and cast iron (K) in industrial milling operations. Tiger·tec Gold coating for extended tool life WKP35G grade for steel and cast iron Parallelogram 85° form, 15° clearance 0.4 mm corner radius with F56 chipbreaker Consistent productivity through advanced coating and grade The Tiger·tec Gold series combined with the WKP35G cutting grade delivers coated carbide performance tuned for turning the typical heat and chip-forming behaviour of steels and the abrasive nature of cast iron into reliable, repeatable results. This combination increases wear resistance and helps maintain cutting-edge integrity over longer tool cycles, which translates into fewer tool changes and steadier production throughput. For operations seeking measurable gains in uptime, the material pairing provides a clear technical advantage. Precision geometry that improves chip control and surface finish A parallelogram 85° form, the F56 chipbreaker and a 15° clearance angle work together to guide chips away from the cutting zone and reduce built-up edge. The 0.4 mm corner radius enhances edge strength without compromising dimensional accuracy, helping to produce a consistent surface finish on interrupted and continuous cuts. These geometric choices reduce the risk of tool-induced variation and support stable machining parameters for predictable part quality. Operational efficiency and predictable tool life for cost-effective milling The insert’s construction focuses on predictable performance: the coated carbide grade is designed for balanced wear behaviour across a wide range of steels and cast irons, enabling longer service intervals and more consistent tool-life curves. Reduced downtime and fewer insert changes contribute directly to overall cost-efficiency in serial production. Where process stability and repeatable results are priorities, this solution supports efficient cycle planning and maintenance scheduling. Practical application advice and production integration Suitable for ISO group P (steel) and K (cast iron) work, this insert fits applications where robust chip control and prolonged edge life are required. The grade and geometry are catalogue- and geometry-dependent for specific cutter bodies; the insert is supplied in the Tiger·tec Gold series and marked for industrial milling use. If there is any uncertainty about compatibility with a specific cutter or machining strategy, technical guidance is available to ensure the insert integrates smoothly into existing tool systems. Contact Metav Werkzeuge today for tailored advice on using Walter Tools Tiger·tec Gold inserts and to arrange supply for steel and cast iron milling applications Technical Data SKU: ADMT120404R-F56-WKP35G-WALTER Designation: ADMT120404R-F56 WKP35G Series: Tiger·tec Gold Manufacturer: Walter Tools Technical specifications Size: 12 Thickness: 04 Clearance angle: 15° Corner radius: 0.4 mm Tolerance class: M Special features Parallelogram 85° insert form F56 chipbreaker WKP35G grade — coated carbide Material suitability: steel (P) and cast iron (K) per ISO 513 Execution: T FAQ What materials is this insert suitable for? This milling indexable insert is suitable for steel (P) and cast iron (K) according to ISO 513 and is supplied in the Tiger·tec Gold WKP35G grade. How does the F56 chipbreaker affect machining? The F56 chipbreaker controls chip formation and evacuation; when used with the ADMT120404R-F56 WKP35G it improves chip flow and contributes to consistent surface quality. What does the 0.4 mm corner radius mean for part accuracy? A 0.4 mm corner radius balances edge strength and dimensional control, helping to protect the cutting edge while maintaining tight tolerances on milled features. Is this insert suitable for mixed batch production? Yes; the coated carbide grade and robust geometry make the insert appropriate for mixed runs of steel and cast iron where consistent tool life and predictable performance are required. Which series does this insert belong to and what advantage does that bring? The insert is part of the Tiger·tec Gold series; this coating and grade pairing enhances wear resistance and supports extended cutting life under typical industrial milling conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Marken und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT120404R-F56 WKP35S T Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating and the WKP35S grade for stable chip control and consistent tool life when machining steel and cast iron; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. ADMT120404R-F56 WKP35S milling insert for steel and cast iron — Walter Tools The ADMT120404R-F56 WKP35S is a precision milling insert engineered for efficient roughing and medium finishing in steel and cast-iron applications. Tiger·tec Silver coated carbide grade WKP35S 15° relief angle for stable cutting 0.4 mm corner radius for accurate profiles Parallelogram 85° shape, 12 mm size Reliable cutting performance for steel and cast iron The insert offers proven performance on both steel (P) and cast iron (K) workpieces thanks to the WKP35S coated carbide grade. The combination of substrate and the Tiger·tec Silver technology reduces flank wear and supports reproducible cutting conditions, which leads to higher process stability and predictable tool life. For production environments where cycle time and part quality must be consistent, this geometry and grade provide measurable improvements in chip formation and wear resistance, helping to maintain dimensional accuracy across batches. Geometry that supports productivity and accuracy With a relief angle of 15° and a Parallelogram 85° shape, the insert balances cutting strength and accessibility to narrow contours. The 0.4 mm corner radius is suited to generating accurate edges while minimising notch wear during interrupted cuts. These geometric choices reduce vibration and contribute to smoother surface finishes, which can decrease downstream rework. The integrated F56 chipbreaker is matched to the grade and geometry to promote predictable chip breaking in long and short-chipping materials. Coating and substrate explained for clearer selection The grade belongs to the Tiger·tec Silver series and uses a coated carbide substrate optimised for the thermal and abrasive demands of steel and cast iron machining. Coating technology enhances oxidation resistance and reduces friction at the cutting edge, which supports higher cutting parameters where appropriate. When selecting tooling, this means fewer index changes and improved cost-in-use compared with uncoated grades in similar operations; the result is an overall increase in machining throughput and less downtime for tool handling. Practical application and handling guidance The insert is supplied in the ADMT designation and fits toolholders compatible with parallelogram, negative-insert systems; its 12 mm characteristic size and 4 mm plate thickness translate into robust support in the pocket and reliable edge strength. For best results, pair the insert with appropriate clamping torque and a holder designed for ADMT geometry to maintain seat accuracy. Regular monitoring of edge condition and adherence to recommended feed and speed ranges will extend performance and reduce scrap rates in production runs. For tailored tooling recommendations and availability of Walter Tools inserts such as the ADMT120404R-F56 WKP35S, contact Metav Werkzeuge for expert guidance and quick supply: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: ADMT120404R-F56-WKP35S-WALTER Designation: ADMT120404R-F56 WKP35S Type: Milling insert Manufacturer: Walter Tools Dimensions & Core data Size: 12 mm Thickness: 4 mm Corner radius: 0.4 mm Relief angle: 15° Shape: Parallelogram 85° Tolerance class: M Materials & Special features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Chipbreaker: F56 Applicable materials: Steel (P), Cast iron (K) Execution: T Base designation without grade: ADMT120404R-F56 FAQ What materials is this insert suited to? The ADMT120404R-F56 WKP35S is designed for steel (P) and cast iron (K) applications, offering tailored wear resistance and chip control for these groups. What does the Tiger·tec Silver series provide? The Tiger·tec Silver coating improves oxidation resistance and reduces friction at the cutting edge, enabling more stable performance and longer edge life on the WKP35S grade. How does the 0.4 mm corner radius affect the cut? A 0.4 mm radius balances edge strength and profile accuracy, helping to produce reliable surface finishes while resisting notch formation in interrupted cutting. Is the insert compatible with standard ADMT toolholders? The insert uses the ADMT geometry and is intended for holders compatible with parallelogram-shaped negative inserts; correct clamping and seat accuracy ensure optimal performance. What role does the F56 chipbreaker play? The F56 chipbreaker is engineered to assist controlled chip formation for the grade and geometry, improving evacuation and reducing the risk of chip-related interruptions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for explanation and product identification only. There is no affiliation between our company and the trademark owners. The offered article is an original, factory-new product of the respective manufacturer.
ADMT120404R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of high wear resistance, stable cutting-edge performance and effective chip control for consistent milling of rostfreier Stahl and heat-resistant alloys. Order the ADMT120404R-F56 WSM35G directly via Metav Werkzeuge or ask our consultants if needed. ADMT120404R-F56 WSM35G — Milling insert (Tiger·tec Gold) by Walter Tools The ADMT120404R-F56 WSM35G is a precision milling insert engineered for demanding applications in rostfreier Stahl and heat‑resistant superalloys, offering robust edge stability and predictable chip formation. Tiger·tec Gold coating for high wear resistance WSM35G grade for heat-resistant alloys Parallelogram 85° geometry for axial flexibility Chipbreaker F56 for stable chip control Consistent edge life for demanding materials The combination of the Tiger·tec Gold coating and the WSM35G grade produces significant improvements in wear behaviour and thermal stability when machining challenging materials. Designed as a coated carbide indexable insert, this component supports reliable cutting-edge performance under high strain, reducing unplanned tool changes and increasing process uptime. Its material compatibility emphasises rostfreier Stahl and superalloys, where adhesion and thermal loads typically compromise untreated edges; the applied surface technology promotes wear resistance and a stable cutting edge, which in turn improves component consistency and reduces overall machining costs. Geometry engineered for reliable chip control and surface quality The insert’s parallelogram 85° form and a relief of 15° clearance angle combine to deliver secure seat engagement and predictable rake behaviour in milling cutters. The integrated chipbreaker F56 supports continuous chip formation and evacuation, lowering the risk of build‑up and ensuring repeatable surface finish. A 0.4 mm corner radius balances edge strength with dimensional accuracy, enabling both robustness in interrupted cuts and fine finishing capability where required. Together, these geometric choices translate into fewer rejects and a more stable process window for serial production. Practical application and process integration Intended for industrial milling operations, the indexable design allows quick replacement and repeatable clamping with standard toolholders. The insert suits sectors where material hardness and heat resistance demand specialised grades, for example aerospace and energy components made from rostfreier Stahl or nickel‑based alloys. Selection of the ADMT120404R-F56 WSM35G supports an economy of operation through extended tool life and predictable wear patterns; process planners gain improved cycle reliability and easier scheduling. For integration into existing tool assemblies, Metav Werkzeuge provides further technical documentation and can assist with grade selection and cutter layout. For machining rostfreier Stahl and heat‑resistant superalloys, trust Walter Tools Tiger·tec Gold inserts for predictable edge life — contact Metav Werkzeuge for tailored application advice: info@metav-werkzeuge.com, +49 2822 7131930 Technical data SKU: ADMT120404R-F56-WSM35G-WALTER Designation: ADMT120404R-F56 WSM35G Series: Tiger·tec Gold Grade: WSM35G Manufacturer: Walter Tools Facts Insert shape: Parallelogram 85° Relief / clearance angle: 15° Corner radius: 0.4 mm Chipbreaker: F56 Plate size: 12 Plate thickness: 04 Tolerance class: M Execution: T Special features Coating: Tiger·tec Gold Material: coated carbide Material suitability: rostfreier Stahl Material suitability: superalloys / titanium Application: heavy‑duty milling, secure chip formation FAQ What materials is this insert best suited for? The ADMT120404R-F56 WSM35G insert (Walter Tools milling insert, SKU ADMT120404R-F56-WSM35G-WALTER) is optimised for rostfreier Stahl and heat‑resistant superalloys, offering enhanced thermal resistance and stable chip control. How does the chipbreaker F56 affect machining? The chipbreaker F56 promotes consistent chip formation and evacuation, reducing the likelihood of build‑up and enabling steady cutting conditions with the ADMT120404R-F56 WSM35G. Which features increase the insert’s edge stability? Edge stability is supported by the Tiger·tec Gold coating and the WSM35G grade, together with the 0.4 mm corner radius, which all contribute to longer, more predictable tool life for this milling insert. Is the insert compatible with standard toolholders? The ADMT120404R-F56 WSM35G is an indexable milling insert designed for use in standard cutter bodies that accept parallelogram inserts with the specified seat geometry. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanation; there is no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original, factory‑new product of Walter Tools.
ADMT120404R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the versatile WSP45G grade for consistent chip control and extended tool life; the robust parallelogram geometry with a 0.4 radius and 15° relief angle supports productive milling of steel, stainless steel and heat‑resistant alloys. Order directly via Metav Werkzeuge or contact our consultants for process-specific recommendations. ADMT120404R-F56 WSP45G Fräswendeschneidplatte by Walter Tools — Tiger·tec Gold, Parallelogram 85° for versatile milling ADMT120404R-F56 WSP45G is a coated carbide milling insert designed for demanding face and shoulder milling tasks across a broad range of materials Tiger·tec Gold coating for high productivity Versatile for steel, stainless steel, superalloys Parallelogram 85° geometry for axial stability Accelerated machining with a hard‑wearing coating The combination of the Tiger·tec Gold technology and the WSP45G grade yields a highly wear‑resistant, PVD‑coated carbide surface that reduces flank wear and prolongs cutting edge life. For industrial milling applications this means fewer indexings and more parts per insert, directly improving process efficiency. The coating supports stable performance during the typical heat and chip formation when cutting steel and stainless steel, so cycle times can be optimised without sacrificing component quality. Stable cutting edge for tough, heat‑generating materials Designed with material groups P, M and S in mind, this insert gives reliable performance when machining unalloyed and alloyed steel, tough stainless steel, and heat‑resistant superalloys or titanium. The grade’s toughness supports secure chip formation under elevated temperatures, while the coated substrate combats chipping on interrupted cuts. This balance of toughness and hardness helps maintain dimensional accuracy and repeatable surface finish over longer tool life, reducing unscheduled tool changes. Geometry that improves chip control and setup simplicity The parallelogram 85° shape and the 0.4 mm corner radius create a predictable load distribution and effective chip breaking when combined with the F56 chipbreaker form. The nominal 15° relief angle reduces rubbing and allows stable axial engagement during face milling. Together these geometric features translate into better stability for slotting and shoulder operations and simplified fixture requirements, which is advantageous for batch production and automated cells. Practical selection and process benefits As a tungsten carbide insert in the Tiger·tec Gold family, this grade is suitable for a wide tooling strategy where one insert must cover multiple materials. The coded plate designation supports straightforward replacement and inventory handling. For manufacturers seeking to raise productivity, this insert offers a measurable improvement in machining throughput while preserving surface integrity and reducing rework. For special applications or borderline materials, Metav Werkzeuge’s consultants can advise on cutting data and toolholder pairing to maximise benefits. Contact Metav Werkzeuge today to discuss how the Walter Tools ADMT120404R-F56 WSP45G can be integrated into the production process and to obtain tailored cutting parameters from our specialists Technical data Article number: ADMT120404R-F56-WSP45G-WALTER Product name: Fräswendeschneidplatte ADMT120404R-F56 WSP45G Walter Tools Manufacturer: Walter Tools Series/grade: Tiger‑tec Gold / WSP45G Insert designation: ADMT120404R-F56 Form: Parallelogramm 85° Chipbreaker: F56 Coating/grade description: PVD‑coated carbide (WSP45G) Material compatibility: P / M / S Execution: T Tolerance class: M Plate size: 12 Plate thickness code: 04 Corner radius: 0.4 Relief angle: 15° Facts Corner radius: 0.4 mm Relief/free angle: 15° Plate size: 12 Plate thickness code: 04 Geometry angle: 85° Special features Tiger·tec Gold coating technology WSP45G: tough, versatile PVD grade for milling Parallelogram shape for axial stability F56 chipbreaker for effective chip control Suitable for steel, stainless steel and superalloys FAQ What materials is this insert suitable for? The ADMT120404R-F56 WSP45G from Walter Tools is specified for groups P, M and S — suitable for machining steel, stainless steel and heat‑resistant superalloys or titanium. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold on the WSP45G grade reduces flank wear and improves heat resistance, which extends the service life of the ADMT120404R-F56 during continuous milling cycles. Which cutting applications benefit most from this geometry? The parallelogram 85° form and F56 chipbreaker of the ADMT120404R-F56 are particularly effective in face and shoulder milling where axial stability and controlled chips are required. Is the insert suitable for interrupted cuts and semi‑roughing? Yes; the WSP45G carbide grade provides toughness for interrupted cuts and semi‑roughing operations while maintaining adequate wear resistance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not indicate any connection between Metav Werkzeuge and the respective brand owners. The offered item is original, factory‑new product of the manufacturer Walter Tools.
ADMT120408L-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold grade and the WKP35G cutting material for consistent edge life and secure chip control in mixed production. The parallelogram 85° geometry with a 15° relief angle and chipbreaker F56 combines stable performance on steel and cast iron with predictable tool change intervals. Order directly via Metav Werkzeuge or contact the technical team for application advice. ADMT120408L-F56 WKP35G – Parallelogram 85° milling insert, Tiger·tec Gold (Walter Tools) A ADMT120408L-F56 WKP35G milling indexable insert designed for productive machining of steel and cast iron in face and shoulder milling operations. Tiger·tec Gold for extended tool life WKP35G grade for mixed P/K applications Parallelogram 85° for secure cutting engagement 15° relief angle and 0.8 mm corner radius Extended edge life for predictable productivity The combination of the Tiger·tec Gold coating technology with the WKP35G substrate results in a cutting edge engineered for long life and consistent wear behaviour. This coating system reduces abrasive wear and supports a reliable cutting edge retention, which means fewer interruptions for tool changes and a smoother production flow. The result is improved machining stability and a stronger cost-per-part profile when processing demanding batches. Versatile performance across steel and cast iron Designed for ISO groups P (steel) and K (cast iron), the insert delivers predictable chip formation and thermal behaviour during medium- to high-depth milling. The WKP35G grade balances toughness and wear resistance to handle the heat and strain typical of steel cuts while also addressing the abrasive tendencies of cast iron. This makes the insert suitable for mixed runs where changeovers between materials are frequent, supporting consistent surface quality with reduced risk of edge chipping. Geometry and chip control that reduce downtime The parallelogram 85° form and integrated chipbreaker F56 offer secure cutting engagement and controlled chip segmentation, helping maintain stable cutting forces and reliable swarf evacuation. With a 15° relief angle and a 0.8 mm corner radius, the insert supports robust edge strength for interrupted cuts while delivering good surface finish. These geometric choices contribute to lower vibration sensitivity and longer period between indexings, which benefits cycle-time-critical applications. For specification support or to source the ADMT120408L-F56 WKP35G insert through Metav Werkzeuge, contact the specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast supply. Technical data SKU: ADMT120408L-F56-WKP35G-WALTER Manufacturer: Walter Tools Product type: Milling indexable insert Series: Tiger-tec Gold Grade: WKP35G Facts Relief angle: 15° Corner radius: 0.8 mm Insert form: Parallelogram 85° Inscribed circle / main size: 12 Thickness code: 04 Tolerance class: M Special features Chipbreaker: F56 Suitable for ISO P (steel) and K (cast iron) Coating technology: Tiger·tec Gold Execution: T ISO designation: ADMT120408L-F56 WKP35G FAQ What materials can this insert machine effectively? This insert is specified for machining steel (ISO group P) and cast iron (ISO group K); the WKP35G grade and Tiger·tec Gold coating are tuned to handle both material groups reliably. How does the chipbreaker F56 influence machining? The chipbreaker F56 promotes predictable chip segmentation and effective swarf control during milling, which improves surface finish and reduces risk of recutting. Is the insert suitable for interrupted cuts and shoulder milling? Yes, the combination of the parallelogram 85° geometry, 15° relief angle and 0.8 mm corner radius provides edge strength and stability suitable for interrupted cuts and shoulder operations. What does the tolerance class M mean for toolholders? Tolerance class M indicates the manufacturing tolerance applied to the insert for consistent seating and repeatable positioning in compatible toolholders. Can the insert work in mixed-production environments? The balance between toughness and wear resistance in WKP35G makes the insert well suited for mixed production of steel and cast iron components, reducing the need for frequent grade changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Mark names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is an original, factory-new product from the manufacturer.
ADMT120408L-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP35S grade for consistent wear resistance and stable chip formation; the insert’s parallelogram 85° geometry and chipbreaker F56 support productive milling of steel and cast iron — order via Metav Werkzeuge or contact our consultants for application advice. ADMT120408L-F56 WKP35S — Milling Insert (Parallelogram 85°, Tiger·tec Silver) by Walter Tools The ADMT120408L-F56 WKP35S is a milling insert designed for productive machining of steel and cast iron; it combines the Tiger·tec Silver coating with a geometry tailored for reliable chip control and repeatable tool life. Tiger·tec Silver coating for longer life Optimised chip control F56 Parallelogram 85° geometry for versatility Durable coating and cutting-grade engineering for consistent performance The insert uses the Tiger·tec Silver technology and the WKP35S grade, a coated carbide solution developed for demanding metalcutting. This combination reduces flank and crater wear during elevated cutting temperatures, which leads to more predictable tool life and fewer unplanned changes. The grade is particularly suited to the thermal and mechanical conditions encountered when machining Steel (P) and Cast iron (K), helping to maintain cutting-edge integrity and dimensional stability in series production environments. Geometry and chip control that improve process reliability The parallelogram 85° form, together with a 15° relief angle and a corner radius of 0.8 mm, provides a balanced mix of edge strength and cutting access. The integrated chipbreaker F56 is designed to produce short, controllable chips for interrupted and continuous cuts, reducing vibration and improving surface finish. These geometric features support consistent material removal rates and help to avoid built-up edge, which in turn enhances both productivity and component quality during milling operations. Application versatility and economic benefits on the shop floor With designation size 12 and thickness 04, and a tolerance class M, this insert is built for repeatable mounting and stable performance across a range of milling tasks. The WKP35S grade from Walter Tools is intended for catalogue- and geometry-dependent use on Steel and Cast iron, enabling shops to standardise tooling for common workpiece families. Standardised inserts like this reduce inventory complexity, simplify tool selection and support a better cost-per-component metric through extended cutting intervals and reliable chip formation. Discuss the ADMT120408L-F56 WKP35S Tiger·tec Silver insert with Metav Werkzeuge to determine the optimal grade and geometry for specific steel or cast-iron applications; contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised recommendations. Technical data SKU: ADMT120408L-F56-WKP35S-WALTER Product type: Fräswendeschneidplatte (milling insert) Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKP35S Material suitability: P / K Numbers / core technical data Relief angle: 15° Plate form: Parallelogram 85° Corner radius: 0.8 mm Size designation: 12 Thickness designation: 04 Chipbreaker: F56 Tolerance class: M Designs / special features Coating: Tiger·tec Silver Material: Coated carbide Main applications: Steel (P), Cast iron (K) Execution: T Series description: WKP35S is a Walter grade optimised for steel and cast iron machining FAQ What materials is this insert suitable for? The ADMT120408L-F56 WKP35S is optimised for Steel (P) and Cast iron (K) machining thanks to the WKP35S grade and the Tiger·tec Silver coating, which together handle the typical heat and chip formation of these materials. What is the purpose of the chipbreaker F56? The chipbreaker F56 on this insert shapes and breaks chips into short, controllable segments, improving chip evacuation, reducing vibration and supporting consistent surface finish during milling cycles with the ADMT120408L-F56 WKP35S. How does the parallelogram 85° geometry benefit milling operations? The parallelogram 85° form offers flexible cutting engagement and favourable cutting forces, while the 15° relief and 0.8 mm corner radius enhance edge strength and stability for reliable milling performance with this Walter Tools insert. Can this insert be used for stainless steel? No specific suitability for stainless steel is documented; the WKP35S grade and the ADMT120408L-F56 insert are primarily indicated for Steel and Cast iron according to the provided data. Which series and coating does this insert belong to? This product is part of the Tiger-tec Silver series and uses a coated carbide grade (WKP35S), combining wear resistance and thermal stability for productive metalcutting. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods from the manufacturer (Walter Tools).
ADMT120408L-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Combining the Tiger‑tec Gold PVD coating, the versatile P/M/S material compatibility and the stable 0.8 mm corner radius, this indexable insert supports consistent, high‑productivity milling operations. Order the ADMT120408L‑F56 WSP45G directly via Metav Werkzeuge or consult the team for application advice. ADMT120408L-F56 WSP45G indexable milling insert — Tiger‑tec Gold, Walter Tools ADMT120408L-F56 WSP45G is an indexable milling insert designed for versatile milling of steel, stainless steel and heat‑resistant alloys in general milling applications. Tiger‑tec Gold PVD coating For steel, stainless and superalloys Parallelogram 85° cutting geometry 0.8 mm corner radius for stable edge High‑performance grade for demanding milling The Tiger‑tec Gold coating delivers a combination of wear resistance and edge stability that translates into longer tool life and fewer tool changes. As a PVD‑coated carbide grade (WSP45G), this insert is engineered for the thermal and mechanical stresses typical when machining steel, stainless steel and heat‑resistant superalloys. The result is improved process reliability and reduced downtime, which makes this cutting grade attractive for batch and continuous production environments where consistent output and repeatability matter. Geometry and edge design for controlled chip formation The insert’s Parallelogram 85° geometry and 0.8 mm corner radius are matched to the insert's grade to support stable cutting and predictable chip flow. The 15° clearance angle assists in reducing rubbing and built‑up edge risks during interrupted cuts, while the nominal thickness and profile maintain rigidity under moderate axial loads. Together these features enable secure chip control and good surface finish, reducing rework and improving downstream assembly quality in precision milling tasks. Practical application benefits and process guidance Designed as a versatile milling solution, the WSP45G grade provides a balance between toughness and wear resistance, making it suitable for mixed‑material shops that machine both low‑alloy steels and more demanding stainless or high‑temperature alloys. The tolerance class M supports reproducible positioning in tool holders, contributing to predictable cycle times and consistent part geometry. For best results, match cutting parameters to the workpiece group (P/M/S) and monitor chip formation to exploit the insert’s optimized chipformer design. For tailored machining recommendations or to secure the ADMT120408L-F56 WSP45G for upcoming production runs, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for direct consultation and ordering support. Technical data Article number: ADMT120408L-F56-WSP45G-WALTER Designation: ADMT120408L-F56 ISO designation: ADMT120408L-F56 WSP45G Series: Tiger‑tec Gold Grade: WSP45G Core data Free angle: 15° Corner radius: 0.8 mm Insert size: 12 Thickness designation: 04 Tolerance class: M Special features Coating: Tiger‑tec Gold (PVD) Material suitability: Steel, stainless steel, superalloys/titanium (P/M/S) Shape: Parallelogram 85° Application: General milling operations Execution: T FAQ What materials can this insert machine? The ADMT120408L‑F56 WSP45G is suited for steel, stainless steel and heat‑resistant superalloys/titanium (P/M/S), offering a versatile option across those ISO groups. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold PVD coating on the WSP45G grade increases wear resistance and edge stability, which typically extends tool life and improves process reliability in milling applications. What does the Parallelogram 85° geometry mean for machining? Parallelogram 85° geometry provides a robust cutting edge orientation that supports controlled chip evacuation and consistent surface quality during face and profile milling. Is the insert compatible with standard tool holders? The insert’s tolerance class M and standard ADMT geometry make it compatible with holders designed for this insert designation; insertion and clamping should follow the holder manufacturer’s guidelines. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT120408R-D56 WAK15 Wendeplatten - Walter Tools
For reliable, high-speed machining of aluminium and other non‑ferrous alloys, the combination of an uncoated carbide grade and a dedicated D56 chipbreaker delivers clean shearing and consistent chip control; order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific setup. ADMT120408R-D56 WAK15 milling insert — Parallelogram 85°, 15° relief — Walter Tools The ADMT120408R-D56 WAK15 is a parallelogram milling insert optimised for machining aluminium and non‑ferrous metals, featuring a sharp geometry and dedicated chip control for stable, productive cutting. Uncoated carbide grade WAK15 for aluminium Parallelogram 85° form for versatile milling 15° relief angle for reduced rubbing and heat D56 chipbreaker for controlled swarf evacuation Precise machining of aluminium and non‑ferrous alloys The WAK15 grade is an uncoated carbide developed for non‑ferrous materials, delivering a sharp cutting edge that reduces material adhesion and build‑up. Together with the D56 chipbreaker, the insert promotes predictable chip formation, which improves process stability and reduces secondary operations for chip disposal. This technical combination benefits shops aiming for consistent surface quality and shorter cycle times when working with aluminium and similar alloys. Geometry designed for reliable cutting performance The 85° parallelogram outline and 15° relief angle create a robust cutting geometry that balances edge strength with low friction at the cutting zone. The 0.8 mm corner radius gives a compromise between edge durability and fine finish capability, suited to a range of finishing and semi‑finishing passes. These geometry choices help maintain a repeatable cutting line and reduce vibration, supporting higher productivity on milling heads that accept this insert format. Productivity and process advantages in daily use Using an insert from the Walter N‑Sortensystem allows for easy grade selection and predictable behaviour across batches. The combination of the WAK15 grade and the D56 chip control reduces downtime caused by poor chip evacuation and tool change‑overs. For production environments working predominantly with non‑ferrous components, the result is improved throughput and lower scrap rates thanks to stable cutting forces and reduced edge clogging. Compatibility, handling and application guidance The insert is identified by the ISO designation ADMT120408R‑D56 WAK15 and is intended for milling cutters that accept ADMT‑style indexable plates. It is supplied in the Walter N‑Sortensystem series and is suitable for light to medium milling operations in aluminium and other non‑ferrous metals. For precise toolholder selection, recommended cutting data and process optimisation, please refer to the cutter manufacturer’s specifications or contact Metav Werkzeuge for tailored recommendations. Choose the Walter Tools ADMT120408R‑D56 WAK15 for efficient, low‑adhesion aluminium milling and contact Metav Werkzeuge for application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADMT120408R-D56-WAK15-WALTER ISO designation: ADMT120408R-D56 WAK15 Series: Walter N‑Sortensystem Facts Inscribed size: 12 Thickness: 04 Relief angle: 15° Corner radius: 0.8 mm Special features Grade: WAK15 (uncoated carbide) Chipbreaker: D56 Shape: Parallelogram 85° Tolerance class: M Suitable for aluminium and other non‑ferrous metals Execution: T FAQ What materials is this insert designed for? This insert from Walter Tools is designed primarily for aluminium and other non‑ferrous metals, utilising the WAK15 uncoated carbide grade for reduced adhesion and reliable cutting. How does the D56 chipbreaker improve the process? The D56 chipbreaker shapes the swarf for predictable evacuation, which improves process stability and reduces the risk of chip re‑contact during milling with the ADMT120408R‑D56 WAK15. What does the WAK15 designation mean? WAK15 denotes a Walter Tools carbide grade intended for non‑ferrous applications; it is an uncoated grade optimised for sharp edges and low friction in aluminium machining. Which cutter bodies accept this insert? This plate fits milling cutter bodies designed for ADMT‑style indexable plates; check the cutter manufacturer’s compatibility list for precise seat and clamp details. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, factory‑new merchandise of the manufacturer Walter Tools.
ADMT120408R-D56 WKK25G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, the WKK25G grade tailored to abrasive cast iron conditions and a 0.8 mm corner radius for improved chip control and consistent edge life; order the ADMT120408R‑D56 WKK25G insert directly via Metav Werkzeuge or request application advice from the consultants. ADMT120408R‑D56 WKK25G Milling indexable insert — Walter Tools, Tiger‑tec Gold, 15° ADMT120408R‑D56 WKK25G is a Tiger‑tec Gold coated milling indexable insert designed for productive machining of cast iron components, featuring a parallelogram 85° form and a 15° free angle. Tiger‑tec Gold coated WKK25G grade Optimised for cast iron machining Parallelogram 85° form for positive engagement 0.8 mm corner radius for reliable edge life Consistent productivity for abrasive cast iron work The coated carbide grade WKK25G, developed within the Tiger‑tec Gold family, is specifically tuned for the abrasive wear and the short, breaking chips typical of cast iron (ISO group K). This results in a reduced wear rate on the cutting edge and more predictable tool life, which directly supports higher component throughput and lower tool change frequency. The integrated chipbreaker D56 promotes stable chip formation, improving surface consistency on critical faces and reducing rework. Geometry and robustness that cut downtime A parallelogram 85° insert profile combined with a 15° free angle provides positive engagement and reliable cutting geometry in interrupted and full-width passes. The 0.8 mm corner radius balances edge strength and finishing capability: larger radii add robustness, while this value maintains a good compromise between life and surface quality. The insert’s thickness code and inscribed size ensure mechanical stability when mounted in compatible cutter bodies, helping to reduce vibration and extend useful edge life. Grade and coating explained for process security The term coated carbide here refers to a hardmetal substrate with a multilayer surface treatment provided by the Tiger‑tec Gold technology: this pairing enhances thermal stability and wear resistance under the high abrasion loads of grey and nodular cast iron. The WKK25G designation denotes the specific Walter Tools grade tuned for such conditions. Selecting this insert for cast iron operations supports reproducible results and improved cost per workpiece through fewer edge failures and consistent cutting performance. For tailored milling solutions with Walter Tools’ Tiger‑tec Gold inserts, contact Metav Werkzeuge for availability and application guidance — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 — Metav Werkzeuge’ specialists can advise on cutter compatibility and process optimisation. Technical Data SKU: ADMT120408R-D56-WKK25G-WALTER Article: ADMT120408R-D56 WKK25G Manufacturer: Walter Tools Product type: Milling indexable insert Facts Free angle: 15° Corner radius: 0.8 mm Insert size: 12 Thickness code: 04 Tolerance class: M Insert form: Parallelogram 85° Chipbreaker: D56 Special features Series: Tiger‑tec Gold Grade: WKK25G (coated carbide) Optimised for cast iron (ISO group K) Designed for stable chip formation and short, breaking chips Parallelogram 85° form for positive cutting engagement FAQ Which materials is this insert suited for? The ADMT120408R‑D56 WKK25G insert is optimised for machining cast iron; the WKK25G grade and Tiger‑tec Gold coating address abrasive wear and short, breaking chips typical of ISO group K materials. What does the WKK25G designation and Tiger‑tec Gold coating mean? WKK25G is Walter Tools’ grade name indicating a coated carbide formulation; the Tiger‑tec Gold coating technology enhances thermal resistance and wear performance for demanding cutting conditions. How do the chipbreaker D56 and the 0.8 mm radius affect machining? Chipbreaker D56 supports controlled chip formation in cast iron, while the 0.8 mm corner radius provides a robust cutting edge that balances durability with the ability to achieve an acceptable surface finish. Which toolholders accept this insert form? The insert matches cutter bodies and clamping systems designed for ADMT‑style parallelogram inserts; compatibility is typical for milling cutters specified for the ADMT1204 family of inserts. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any connection between Metav Werkzeuge and the named manufacturers. The offered item is an original, factory‑new product of the manufacturer.
ADMT120408R-D56 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP25S grade for reliable machining of steel and cast iron; the parallelogram 85° geometry and 15° clearance angle ensure stable chip control and consistent edge life. Order the insert directly via Metav Werkzeuge or ask our consultants for application advice. ADMT120408R-D56 WKP25S milling indexable insert — Walter Tools, Tiger‑tec Silver, for steel and cast iron The ADMT120408R-D56 WKP25S is a parallelogram 85° milling insert designed for productive roughing and semi‑finishing of steels and cast irons in industrial metalcutting applications. Tiger‑tec Silver coating for wear resistance WKP25S grade optimised for P and K materials Parallelogram 85° for positive cutting engagement 15° clearance angle with 0.8 mm corner radius Robust grade and coating for longer productive life The insert uses the WKP25S carbide grade within the Tiger‑tec Silver technology, developed to balance wear resistance and toughness. This combination reduces flank wear under typical steel and cast‑iron cutting conditions and supports predictable toolchange intervals. The result is a higher process reliability and lower per‑part machining cost through consistent edge performance. The coated substrate is suited to the thermal and abrasive loads typical for P (steel) and K (cast iron) groups according to ISO classification. Geometry that stabilises cutting and improves chip control A parallelogram 85° shape together with a 15° clearance angle produces a favourable cutting‑force vector for slotting and face milling operations; it helps to reduce axial load peaks and promotes steady engagement with the workpiece. The integrated D56 chipbreaker manages chip formation for short, controllable chips on both steel and cast iron, which simplifies chip evacuation and reduces the risk of rework. The 0.8 mm corner radius gives a balanced edge strength that supports heavier cuts while retaining a fine surface finish when needed. Practical dimensions and application flexibility The insert is supplied in the ADMT120408R‑D56 geometry, size 12 with a thickness of 4, which fits common toolholders for medium‑duty milling tasks. Its tolerance class M and execution T ensure interchangeability within standard clamping systems and precise seating during index changes. Use of this insert in systematic cutter setups yields repeatable results and makes tool‑path planning more reliable across production batches. How this insert benefits workshop productivity By combining a modern coating system, a robust carbide grade and a chipbreaker tuned for mixed applications, the insert shortens set‑up cycles and reduces downtime caused by unpredictable edge failure. The design supports a wider range of cutting parameters, allowing process engineers to increase metal removal rates where machine capability and workholding allow. In practice, this means fewer interruptions for index changes and a smoother production flow. Discuss Walter Tools Tiger‑tec Silver inserts with Metav Werkzeuge to confirm the best grade and geometry for the specific steel or cast‑iron application and secure optimal cutter performance. Technical data SKU: ADMT120408R-D56-WKP25S-WALTER Article: ADMT120408R-D56 WKP25S Manufacturer: Walter Tools Product type: Milling indexable insert Series: Tiger‑tec Silver Grade: WKP25S Facts Clearance angle: 15° Corner radius: 0.8 mm Inscribed circle / size: 12 mm Thickness: 4 mm Plate angle: 85° (parallelogram) Tolerance class: M Special features Chipbreaker: D56 Coated carbide substrate Application groups: Steel (P) and Cast iron (K) Execution: T Designation: ADMT120408R-D56 FAQ What materials is this insert intended for? The ADMT120408R‑D56 WKP25S by Walter Tools is formulated for machining steel (P) and cast iron (K), using the WKP25S grade within the Tiger‑tec Silver range. How does the D56 chipbreaker affect machining? The D56 chipbreaker on this Walter Tools insert promotes short, controlled chips for both steel and cast iron, enhancing chip evacuation and reducing the risk of chip entanglement. What advantages does the Tiger‑tec Silver coating provide? Tiger‑tec Silver coating on the WKP25S grade improves wear resistance and thermal stability, extending the effective cutting life of the insert under typical industrial cutting conditions. Is the corner radius suitable for heavier cuts? The 0.8 mm corner radius offers a good compromise between edge strength and surface finish, supporting heavier roughing cuts while maintaining acceptable finishing capability. Can this insert be used in standard toolholders? The ADMT120408R‑D56 geometry and tolerance class M are compatible with common toolholder systems designed for parallelogram 85° inserts. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT120408R-D56 WKP35G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold coating and a 0.8 mm corner radius delivers durable cutting edges and consistent chip control for demanding milling tasks; the insert’s 15° relief improves stability under load. Order the ADMT120408R-D56 WKP35G directly via Metav Werkzeuge or consult the specialists for application support. ADMT120408R-D56 WKP35G – Milling indexable insert, Tiger‑tec Gold (Walter Tools) An ADMT120408R-D56 WKP35G is a parallelogram 85° milling insert developed for productive machining of steel and cast iron. Tiger‑tec Gold coated grade WKP35G Designed for steel (P) and cast iron (K) Parallelogram 85° insert geometry 15° relief angle for stable cutting 0.8 mm corner radius for edge strength High productivity through advanced coating and grade The combination of Tiger‑tec Gold surface treatment and the WKP35G carbide grade is engineered to reduce wear and extend tool life under continuous cutting conditions. The coated hardmetal resists abrasive wear typical for ferritic and pearlitic materials, which improves process security and reduces the need for frequent index changes. By stabilising the cutting edge, the coating also contributes to predictable tool performance and consistent cycle times, supporting efficient production planning. Geometry that stabilises cuts and improves surface quality The parallelogram 85° geometry and 15° relief angle provide a balance between positive cutting action and mechanical support. This geometry reduces vibration and redirects cutting forces, resulting in enhanced edge stability and improved surface finish on workpieces. The 0.8 mm corner radius increases edge robustness, making the insert suitable for medium to heavy interrupted cuts while maintaining good dimensional accuracy on final passes. Application range and practical benefits in machining Designed for the ISO groups P and K, the insert is suitable for a broad range of steel and cast iron components. The integrated chipbreaker D56 supports controlled chip formation, lowering the risk of built‑up edge and easing chip evacuation in shoulder milling and slotting operations. For production environments seeking reproducible results, this insert offers a practical mix of wear resistance and chip control that reduces downtime and contributes to lower total machining cost per part. Handling, replacement and process integration The insert’s standard designation simplifies toolholder selection and inventory management. The ADMT120408R‑D56 family fits common milling cutter systems designed for parallelogram inserts, enabling straightforward replacement and repeatable positioning. Because tool life is extended by the grade and coating, the frequency of index changes is reduced, which helps maintain throughput in machining cells and lowers handling effort. For machining processes that demand reliability and longer edge life, contact Metav Werkzeuge for tailored application advice and to arrange supply of Walter Tools inserts: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number / SKU: ADMT120408R-D56-WKP35G-WALTER Designation: ADMT120408R-D56 ISO designation: ADMT120408R-D56 WKP35G Grade: WKP35G Series: Tiger‑tec Gold Manufacturer: Walter Tools Product type: Milling indexable insert Execution: T Facts Geometry: Parallelogram 85° Free angle: 15° Corner radius: 0.8 Size designation: 12 Plate thickness designation: 04 Chipbreaker: D56 Tolerance class: M Special features Coating: Tiger‑tec Gold Material suitability: P / K (steel and cast iron) Series description: Coated carbide grade for steel and cast iron Application focus: General milling operations requiring chip control and edge life Storytrigger: indexable inserts FAQ What materials is this insert suitable for? The ADMT120408R-D56 WKP35G is developed for machining steel (ISO group P) and cast iron (ISO group K) applications, leveraging the Tiger‑tec Gold coating to resist abrasive wear. How does the Tiger‑tec Gold coating affect tool life? Tiger‑tec Gold increases wear resistance and thermal stability on the cutting edge of the ADMT120408R-D56 WKP35G, resulting in longer service intervals and more consistent cutting performance. Which cutting tasks benefit most from this insert geometry? The parallelogram 85° geometry with a 15° relief is particularly effective in shoulder milling and light to medium roughing where a balance of positive cutting action and mechanical support is required. What is the role of the D56 chipbreaker on this insert? The D56 chipbreaker on the ADMT120408R-D56 WKP35G promotes controlled chip formation and evacuation, reducing the risk of built‑up edge and improving process stability during intermittent cuts. How does the 0.8 mm corner radius influence machining? A 0.8 mm corner radius increases edge robustness, improving resistance to chipping under heavier engagement and enabling improved surface integrity on semi‑finishing passes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original brand‑new goods of the manufacturer.
ADMT120408R-D56 WKP35S Wendeplatten - Walter Tools
Benefit from precise, repeatable machining with the Tiger·tec Silver‑coated ADMT120408R‑D56 WKP35S: excellent chip control from the D56 chipbreaker, consistent performance on steel and cast iron, and reliable edge life for productive milling. Order this milling insert directly via Metav Werkzeuge or consult our technical team for application advice. ADMT120408R-D56 WKP35S milling indexable insert for steel and cast iron, Tiger·tec Silver — Walter Tools The ADMT120408R-D56 WKP35S is a solid indexable milling insert engineered for efficient machining of P and K materials, combining a robust chipbreaker design with a coated substrate for stable performance in abrasive and heat‑intensive operations. Tiger·tec Silver coating Optimised D56 chip control Parallelogram 85° geometry 0.8 mm corner radius Improved process reliability through controlled chip formation The D56 chipbreaker and the insert geometry ensure predictable chip flow when machining steel and cast iron, in line with ISO 513 material groups. This leads to fewer tool interruptions and steadier cycle times, which is crucial for production environments that demand high throughput and repeatable part quality. The coated substrate supports wear resistance and helps maintain cutting edge integrity over longer tool life. Better surface finish and stable edge behaviour The combination of the WKP35S grade and the Tiger·tec Silver technology delivers wear resistance and toughness suitable for mixed‑batch work. The 0.8 mm corner radius and the 85° parallelogram form reduce the risk of chipping under intermittent cuts and support consistent surface quality on workpieces. This insert design converts material removal into a controlled process, improving first‑pass yield and reducing rework. Practical installation and production security With a standard indexable format and stable seating geometry, the insert is straightforward to integrate into common milling cutters and toolholders, enabling quick index changes and consistent clamping repeatability. The result is lower setup time and reliable part tolerances across shifts, making this solution well suited to both jobbing shops and series production where predictable tool life and minimal downtime are priorities. For efficient milling with Walter Tools' Tiger·tec Silver inserts, contact Metav Werkzeuge for technical matching and prompt supply — eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical data Article number: ADMT120408R-D56-WKP35S-WALTER SKU: ADMT120408R-D56-WKP35S-WALTER Product type: Milling indexable insert Manufacturer: Walter Tools Grade: WKP35S Facts Free angle: 15° Corner radius: 0.8 mm Plate size: 12 Thickness: 04 Tolerance class: M Special features Series: Tiger·tec Silver Chipbreaker: D56 Shape: Parallelogram 85° Material application: P (steel), K (cast iron) Execution: T Material type: P / K FAQ Which materials can be machined with this insert? The ADMT120408R‑D56 WKP35S is designed for steel (P) and cast iron (K) applications in accordance with ISO 513 material groupings. What advantages does the Tiger·tec Silver coating provide? Tiger·tec Silver on the WKP35S grade enhances wear resistance and temperature stability, helping the insert retain cutting edge performance during extended runs. How does the D56 chipbreaker affect machining? The D56 chipbreaker promotes controlled chip formation and evacuation, reducing the likelihood of built‑up edge and lowering the risk of machine interruptions during milling. Is the 0.8 mm corner radius suitable for finishing operations? A 0.8 mm corner radius balances edge strength with the ability to achieve fine surface finishes; it is appropriate for many finishing and medium‑cutting conditions. Can the insert be used in common indexable milling cutters? Yes, the geometry and size conform to standard indexable insert configurations, allowing compatibility with typical milling cutter systems that accept this insert format. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product names are mentioned for explanation purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
ADMT120408R-D56 WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold PVD grade and the robust WSP45G cutting grade combined with the 15° relief and a 0.8 mm corner radius for consistent material removal and extended tool life; order the inserts directly via Metav Werkzeuge or request tailored advice from the consultants. ADMT120408R-D56 WSP45G — Fräswendeschneidplatte (milling indexable insert) by Walter Tools, Tiger·tec Gold coating, P/M/S suitability ADMT120408R-D56 WSP45G is a PVD-coated indexable insert designed for versatile milling of steels, rostfreie Stähle and heat-resistant alloys in demanding production environments Tiger·tec Gold PVD coating for high wear resistance Versatile for Stahl, rostfreier Stahl and superalloys Parallelogram 85° form for stable cutting geometry 15° relief and 0.8 mm corner radius for secure edge strength Increased process reliability through coating and grade The combination of Tiger·tec Gold technology with the WSP45G grade provides a balance of wear resistance and edge stability that supports longer tool life and fewer interruptions in production. The PVD-coated carbide construction reduces flank wear and improves resistance to thermal and mechanical loads during continuous milling. In practice, this means more consistent component tolerances and fewer insert changes, which contributes directly to higher uptime and lower process costs. Where high machining reliability is a priority, the coated grade performs well across typical industrial cycles. Clear material range and machining benefits This insert is specified for group P / M / S, indicating suitability for machining unalloyed and alloyed Stahl, rostfreier Stahl and heat-resistant superalloys or titanium. The chemical and mechanical demands of these groups are different: steels tend to produce more predictable chips, rostfreie Stähle require control of heat and built-up edge, and superalloys demand thermal resistance and cutting-edge robustness. The WSP45G composition has been formulated to address these challenges, enhancing chip control and helping to maintain a stable cutting edge under elevated temperatures and difficult chip formation conditions. Geometry that supports secure cutting and predictable results The parallelogram 85° insert form, combined with a 15° relief and a 0.8 mm corner radius, grants a favourable force distribution and reliable edge strength during interrupted and continuous milling operations. The specific D56 chipbreaker geometry promotes controlled chip evacuation in a wide range of feeds and depths of cut, reducing the risk of recutting and surface defects. Operators benefit from more predictable tool behaviour and improved surface finish, while process engineers gain leeway to optimise cutting parameters for productivity without compromising component quality. Practical handling and application context The insert is supplied in execution code T and thickness code 04, with size code 12 and the ISO designation ADMT120408R-D56 WSP45G, allowing simple integration into existing toolholders that accept the corresponding insert family. The tolerance class M supports consistent fitting accuracy, which is essential for repeatable results in serial production. Because the insert is an indexable component, fast index changes minimise downtime and simplify inventory management compared with solid tools, supporting leaner workshop logistics and quicker tool set-ups. For application guidance, batch recommendations or to order Walter Tools ADMT120408R-D56 WSP45G inserts under Tiger·tec Gold for enhanced milling performance, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ADMT120408R-D56-WSP45G-WALTER Label: Fräswendeschneidplatte ADMT120408R-D56 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Grade: WSP45G Series: Tiger-tec Gold Execution code: T Tolerance class: M UID: ADMT120408R-D56-WSP45G-WALTER Facts Relief angle: 15° Corner radius: 0.8 mm Size code: 12 Thickness code: 04 Chipbreaker: D56 Insert form: Parallelogram 85° Special features Material suitability: P / M / S Designed for: milling applications Axite enrichment: Serie: Tiger-tec Gold; Sorte: WSP45G; beschichtetes Hartmetall; zähe, vielseitige PVD-Sorte für Fräsanwendungen Toleranzklasse: M Storytrigger: wendeplatten FAQ What materials can be machined with this insert? The ADMT120408R-D56 WSP45G insert is suitable for P / M / S groups, i.e. Stahl, rostfreier Stahl and heat-resistant superalloys/titanium, according to the grade characteristics. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold PVD coating on the WSP45G grade improves wear resistance and thermal stability, increasing tool life and maintaining cutting-edge integrity under demanding milling conditions. How does the insert geometry affect milling performance? The parallelogram 85° form, 15° relief and 0.8 mm corner radius deliver stable cutting forces, secure edge strength and controlled chip flow, benefiting surface finish and process predictability. Is this insert compatible with standard indexable milling holders? The ISO designation ADMT120408R-D56 defines the insert family and size; holders designed for ADMT-style inserts will accept this insert form and allow straightforward integration. What chip control can be expected from the D56 breaker? The D56 chipbreaker is engineered for consistent chip formation across a range of feeds and depths of cut, supporting reliable evacuation and reducing the likelihood of recutting. Can this insert be used for high-speed machining? The WSP45G grade and Tiger·tec Gold coating offer good thermal and wear resistance that supports elevated cutting speeds in many milling operations; final parameter selection should follow machine and workpiece constraints. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods of the manufacturer.
ADMT120408R-F56 WAK15 Wendeplatten - Walter Tools
The combination of a specialised WAK15 grade and a chipbreaker F56 ensures reliable machining of aluminium and other non‑ferrous metals while the precise parallelogram 85° geometry reduces setup time and rework; order directly via Metav Werkzeuge or consult our specialists for cutting-data optimisation. ADMT120408R-F56 WAK15 – Milling indexable insert by Walter Tools, uncoated carbide for aluminium, chipbreaker F56 A ADMT120408R-F56 WAK15 indexable insert designed for high‑quality milling of aluminium and non‑ferrous metals, combining a sharp cutting edge with a geometry that reduces built‑up edge and supports stable chip formation WAK15 grade for aluminium and non‑ferrous metals Chipbreaker F56 for controlled chip formation Parallelogram 85° form for stable cutting 0.8 mm corner radius and 15° relief angle Consistent high performance for non‑ferrous machining The WAK15 uncoated carbide composition is tailored for machining aluminium and other non‑ferrous materials, offering a sharp cutting edge and low adhesion properties that minimise built‑up edge. Combined with the chipbreaker F56, this insert promotes predictable chip control and reduces interruptions caused by clogged flutes. The result is improved process stability and higher effective machining time per tool change, which supports leaner production and consistent component quality. Geometry that reduces rework and improves surface finish The insert’s parallelogram 85° form together with a 15° relief angle and 0.8 mm corner radius delivers a balance between edge strength and surface integrity. These geometrical features help achieve a finer surface finish on cast and machined aluminium parts and lower the likelihood of burr formation at corners. With tolerance class M, dimensional repeatability is maintained across index changes, aiding predictable tool offsets and reducing time spent on manual corrections. Practical economy and straightforward integration in production Supplied in the Walter N‑grade system, this insert fits established milling bodies and simplifies inventory with a clear designation. The nominal 12 mm size and nominal thickness (04) provide a robust platform for moderate cutting parameters while keeping indexable insert replacement quick and safe. The design supports higher feeds typical for non‑ferrous machining, helping to shorten cycle times and lower per‑part tooling costs without sacrificing surface quality. For tailored cutting data or to confirm compatibility with specific toolholders, contact Metav Werkzeuge for expert advice and ordering support for Walter Tools inserts. Technical Data Article number: ADMT120408R-F56-WAK15-WALTER Designation: ADMT120408R-F56 WAK15 Manufacturer: Walter Tools Product type: Milling indexable insert Facts Size: 12 mm Thickness: 04 (nominal) Corner radius: 0.8 mm Relief angle: 15° Plate form: Parallelogram 85° Chipbreaker: F56 Tolerance class: M Special features Uncoated carbide grade WAK15 Series: Walter N‑grade system Intended for aluminium and non‑ferrous metals (ISO group N) Sharp edge geometry, reduced material adhesion Stable chip formation, optimised for high feed machining FAQ What materials is this insert suitable for? This insert is suitable for aluminium and other non‑ferrous metals; the WAK15 grade and chipbreaker F56 are optimised for ISO group N materials. Is the ADMT120408R‑F56 compatible with standard Walter toolholders? Yes, the insert is part of the Walter N‑grade system and is intended for use with matching Walter milling bodies and clamping systems. How does the chipbreaker F56 affect productivity? The F56 chipbreaker produces predictable chip segments and reduces the risk of built‑up edge, which contributes to longer uninterrupted machining periods and more consistent cycle times. What tolerances and repeatability can be expected? The insert is specified to tolerance class M, supporting repeatable indexing and stable offsets for precision milling operations. Can this insert be used for finishing passes? With its 0.8 mm corner radius and sharp geometry, the insert can be applied to light finishing when parameters are set appropriately for non‑ferrous materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group and is recognised as a leading manufacturer of precision tools for metalworking. Protected trademarks and trade names are the property of their respective owners and are mentioned here for explanatory purposes only; no affiliation with our company is implied. The offered article is an original, brand‑new product of the manufacturer.
ADMT120408R-F56 WKK25G WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance, the F56 chipbreaker tailored for cast iron and a secure parallelogram seating for uninterrupted production — order directly via Metav Werkzeuge or consult our experts for application advice. ADMT120408R-F56 WKK25G milling insert for cast iron – Tiger‑tec Gold by Walter Tools The ADMT120408R-F56 WKK25G is a robust milling insert in parallelogram 85° form, developed for productive machining of cast iron with a Tiger‑tec Gold coated carbide grade. Tiger‑tec Gold coated carbide WKK25G Optimised F56 chipbreaker for cast iron Parallelogram 85° geometry for secure seating 15° clearance angle with 0.8 mm corner radius Deliver predictable productivity in cast iron milling The ADMT120408R-F56 WKK25G combines the Tiger‑tec Gold coating with the WKK25G grade to address the abrasive wear and fragmented chip behaviour typical of cast iron. The result is consistent cutting-edge performance and lower frequency of flank wear, which translates into fewer tool changes and more stable cycle times. The integrated F56 chipbreaker is optimised to control short, brittle chips from cast materials, reducing the risk of clogging and improving process reliability on milling operations. Geometry that ensures secure seating and repeatable accuracy The parallelogram 85° form, together with a 15° clearance angle and 0.8 mm corner radius, provides a compact contact footprint and reliable clamping stability. These geometric choices support repeatable insert indexing and help maintain toolpath accuracy under varying cutting loads. For production runs where dimensional stability and surface quality matter, the geometry reduces vibration and supports predictable results across batches. Longer edge life, less downtime, measurable efficiency gains Coated carbide technology and a grade tuned for abrasive cast iron reduce progressive wear mechanisms and deliver longer edge life. In practice, this means fewer interruptions for tool changes and a more economical manufacturing flow. The coated surface promotes a stable cutting edge and improved heat resistance, which together enhance productivity and cut overall processing costs through reduced downtime. Clear application scope and selection guidance Designed specifically for machining Gusseisen (cast iron) per ISO group K, this insert excels in both roughing operations and finishing passes where chip control and edge stability are crucial. The product data identifies suitability for cast iron; other material groups are not specified for this grade. For process optimisation and cutting parameter recommendations with the Walter Tools Tiger‑tec Gold system, Metav Werkzeuge can provide tailored advice and machining data. Contact Metav Werkzeuge for application support and to discuss how the Walter Tools Tiger‑tec Gold ADMT120408R-F56 WKK25G insert can improve cast iron milling performance Technical Data Article number: ADMT120408R-F56-WKK25G-WALTER Designation: ADMT120408R-F56 WKK25G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WKK25G Facts Clearance angle: 15° Corner radius: 0.8 mm Plate form: Parallelogram 85° Plate size: 12 Plate thickness: 04 Tolerance class: M Special features Chipbreaker: F56 Coating: Tiger‑tec Gold Carbide type: coated carbide (WKK25G) Application: cast iron (ISO group K) Execution: T FAQ Which materials is this insert designed for? The ADMT120408R-F56 WKK25G milling insert by Walter Tools is developed for machining cast iron (ISO group K) and is optimised to handle the abrasive, short-chip behaviour of these materials. What does the WKK25G designation indicate? WKK25G identifies the Walter Tools carbide grade within the Tiger‑tec Gold family; the grade offers a coated carbide composition tuned for wear resistance on cast iron. How does the F56 chipbreaker affect machining? The F56 chipbreaker on this insert controls short, brittle chips typical of cast iron, improving evacuation and reducing the chance of chip packing during milling. Is the geometry suitable for stable production runs? Yes, the parallelogram 85° shape combined with a 15° clearance angle and a 0.8 mm corner radius provides secure seating and repeatable indexing for stable production performance. Can the ADMT120408R-F56 WKK25G be used for finishing as well as roughing? The insert’s grade and chipbreaker make it suitable for a range of operations on cast iron, from high‑volume roughing to quality finishing passes where chip control and edge integrity matter. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. The mentioned brand names are used for explanation only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the respective manufacturer.
ADMT120408R-F56 WKP25S Wendeplatten - Walter Tools
Benefit from a combination of coated-carbide performance, proven chip control and a geometry built for rigid clamping; the result is reliable machining of steel and cast iron with reduced downtime. Order the insert directly via Metav Werkzeuge or consult their specialists for application-specific recommendations. ADMT120408R-F56 WKP25S indexable milling insert — Tiger·tec Silver, for steel and cast iron machining (Walter Tools) A ADMT120408R-F56 WKP25S indexable milling insert engineered for medium- to high-productivity milling of steel (P) and cast iron (K) components. *Tiger·tec Silver coating for enhanced wear resistance *Suitable for steel and cast iron applications *Parallelogram 85° shape with 0.8 mm corner radius *15° positive relief for reliable chip control Consistent wear resistance for sustained production The cutting grade is based on Tiger·tec Silver technology and the WKP25S coated-carbide matrix, combined with the chipbreaker F56. This specification provides improved abrasion resistance and stable edge behaviour during continuous operation, which translates into fewer tool changes and predictable performance. The coating and grade are tuned for the heat and chip characteristics typical of machining steel and cast iron, delivering a balance between life and surface finish without requiring specialist tooling knowledge. Geometry that secures rigidity and accurate engagement The insert’s parallelogram 85° form and 0.8 mm radius support robust clamping and controlled entry angles, reducing vibration in interrupted or heavy cuts. A 15° relief reduces contact at the flank while maintaining support for axial loads. Physical dimensions such as size 12 and thickness 04, together with tolerance class M, make the insert compatible with standard holders designed for this ISO-style designation and ensure repeatable seating for reproducible results. Practical benefits for shop-floor efficiency Because the grade and chipbreaker target common production materials, shops can expect improved chip control and predictable flank wear, contributing to process stability and fewer unplanned stoppages. The combination of grade and geometry supports cost-effective machining by extending tool life and lowering cycle-time variability. Conforming to ISO 513 material groupings, the insert is rated for P (steel) and K (cast iron) use, which helps planners select tooling with a sound technical basis rather than trial-and-error. Easy handling and straightforward integration into tooling systems The insert is supplied in the standard ADMT-style format and is intended for straightforward indexing within compatible milling holders. The WKP25S grade and Tiger·tec Silver series simplify grade selection for mixed-production environments where both steel and cast iron appear on the worklist. Labelled with the ADMT geometry, the insert fits established clamping systems without the need for bespoke adapters, enabling fast changeovers and predictable fixture performance. For application advice, cutting-parameter guidance or to secure supply of Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 for direct consultation and swift delivery. Technical data SKU: ADMT120408R-F56-WKP25S-WALTER Article designation: ADMT120408R-F56 WKP25S Brand: Walter Tools Series: Tiger-tec Silver Specifications Plate size: 12 Thickness: 04 Relief angle: 15° Corner radius: 0.8 mm Plate form: Parallelogram 85° Chipbreaker: F56 Tolerance class: M Materials & features Coating: Tiger·tec Silver Grade: WKP25S (coated carbide) Applicable materials: steel (P), cast iron (K) Execution: T Material composition: P / K FAQ What materials is this insert intended for? The ADMT120408R-F56 WKP25S insert from Walter Tools is formulated for steel (P) and cast iron (K) machining, consistent with the ISO 513 groupings assigned to the WKP25S grade. How does the Tiger·tec Silver coating benefit milling applications? The Tiger·tec Silver coating on the WKP25S grade improves abrasion resistance and edge stability during continuous milling, which supports longer tool life and consistent surface quality when using the ADMT120408R-F56 geometry. Which geometric features improve clamping and chip control? The parallelogram 85° form, 0.8 mm radius and chipbreaker F56 combine to enhance clamping stability and chip formation, while the 15° relief reduces flank contact for reliable engagement in interrupted and full-width cuts. Is this insert suitable for stainless steel or hardened materials? The WKP25S specification provided indicates suitability for steel and cast iron; stainless steel and hardened-material suitability are not specified for this insert and should be verified with Metav Werkzeuge before use. How is the insert identified and ordered for production use? Order by SKU ADMT120408R-F56-WKP25S-WALTER or by the ISO designation ADMT120408R-F56 WKP25S; the Walter Tools grade and Tiger·tec Silver series are referenced to ensure correct material and coating selection. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen; Germany. The Walter AG (market presence: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. The item offered is original factory-new merchandise from the manufacturer.
ADMT120408R-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WKP35G grade for consistent chip control and long tool life; the insert is optimised for machining steel and cast iron to maintain a steady production flow. Order the ADMT120408R-F56 WKP35G directly via Metav Werkzeuge or ask our consultants if needed. ADMT120408R-F56 WKP35G parallelogram milling insert for steel and cast iron — Walter Tools The ADMT120408R-F56 WKP35G is a parallelogram milling insert designed for secure clamping and efficient chip formation in steel and cast iron applications. Tiger·tec Gold coated solid carbide grade Optimised for steel and cast iron machining Parallelogram 85° form for secure toolholding 15° relief and 0.8 mm corner radius High-performance grade for demanding steel and cast-iron operations The combination of the WKP35G grade and Tiger·tec Gold coating delivers a durable cutting edge that resists abrasive wear and maintains performance under thermal load. Engineered for the ISO groups P and K, this grade is balanced to handle the continuous heat generation typical of steel machining while offering the fracture resistance required for cast iron. The result is stable chip control and reduced edge chipping, which supports longer intervals between tool changes and more predictable process outcomes. Geometry that increases stability and surface quality The insert’s Parallelogram 85° form and 15° relief reduce toolholder stress and improve seating precision, which helps to diminish vibration during operation. With a 0.8 mm corner radius and the F56 chipbreaker, the geometry is tailored to produce consistent chip segmentation and good surface finishes. These features translate into improved dimensional repeatability and a lower risk of unexpected rework, especially in serial production where each component’s surface integrity matters. Productivity benefits and process reliability for production environments Tolerance class M and the robust coated-carbide construction combine to offer reliable performance in both roughing and finishing tasks, depending on toolpath and holder geometry. The chipbreaker design supports effective evacuation under varied cutting conditions, helping to keep cycle times down and machine utilisation high. For process engineers, this means a predictable tool life and the possibility to optimise cutting parameters for cost-effective throughput while maintaining component quality. For high-productivity machining with Walter Tools’ WKP35G grade, contact Metav Werkzeuge for cutting-data recommendations and ordering: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADMT120408R-F56-WKP35G-WALTER Article name: ADMT120408R-F56 WKP35G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Relief angle: 15° Corner radius: 0.8 mm Inscribed circle / size: 12 mm Thickness code: 04 Tolerance class: M Chipbreaker: F56 Form: Parallelogram 85° Special features Grade: WKP35G (coated carbide, Tiger·tec Gold) Material suitability: Steel (P) and cast iron (K) Application: general milling — finishing and roughing dependent on geometry Stable chip formation and good edge stability FAQ Which materials is this insert suitable for? The ADMT120408R-F56 WKP35G insert from Walter Tools is designed for ISO groups P and K, meaning it is suitable for machining steel and cast iron. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WKP35G grade improves wear resistance and reduces thermal loading at the cutting edge, extending tool life and supporting consistent surface quality. How does the F56 chipbreaker affect machining? The F56 chipbreaker promotes controlled chip segmentation and evacuation, which helps to avoid built-up edge and maintains process stability during continuous milling operations. What does tolerance class M mean for production? Tolerance class M indicates a medium tolerance level that balances manufacturing cost and dimensional precision suitable for many industrial milling applications. Can this insert be used for both roughing and finishing? Depending on the specific toolholder, cutting data and component geometry, the ADMT120408R-F56 WKP35G can be employed for both roughing and finishing operations; cutting conditions should be adjusted to match the desired outcome. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT120408R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Silver coating and the WKP35S grade for stable chip formation and long tool life, together with the parallelogram 85° geometry for reliable engagement in interrupted cuts; order directly via Metav Werkzeuge or consult our specialists for tailored cutting data. ADMT120408R-F56 WKP35S milling indexable insert – F56 chipbreaker, parallelogram 85° (Walter Tools) The ADMT120408R-F56 WKP35S is a high‑performance milling insert designed for machining Stahl and cast iron in a range of milling operations Tiger‑tec Silver coated carbide grade WKP35S Optimised for Stahl and cast iron machining Parallelogram 85° insert geometry F56 chipbreaker for consistent chip control Boosted productivity with consistent chip control The Tiger‑tec Silver coating combined with the WKP35S grade delivers a balanced mix of wear resistance and toughness, which translates into longer tool life and fewer index changes on the shop floor. The F56 chipbreaker is engineered for reliable chip segmentation in mixed cutting conditions, reducing recutting and minimising downtime for chip clearing. With a stable cutting edge and the parallelogram form, the insert provides predictable cutting behaviour in interrupted and continuous milling, helping to keep cycle times steady and quality consistent. This makes the insert especially suitable where repeatability and process stability are priorities. Machining capability tailored to Stahl and cast iron The insert is specified for machining the ISO groups P and K, meaning it handles unalloyed and alloyed Stahl as well as cast iron. The grade is adapted to the typical heat generation and chip formation of these materials: it offers abrasion resistance for the abrasive nature of cast iron while maintaining edge stability for Stahl applications. The geometry and chipbreaker promote short, controlled chips when working cast components and allow efficient heat dispersion during aggressive cuts in Stahl. Users benefit from fewer surface defects and a reduced need for secondary finishing operations. Geometry and cutting data that support process reliability A clearance angle of 15° and a corner radius of 0.8 mm create a cutting edge that balances robustness with surface quality. The parallelogram 85° form ensures correct cutting edge orientation for axial and radial forces common in face and shoulder milling. The insert’s tolerance class M reflects manufacturing accuracy for consistent seating and repeatable results in standard tool holders. For applications requiring a combination of roughing and finishing, the moderate corner radius improves edge strength under load while still permitting acceptable surface finishes. For precise cutting parameters or recommendations for specific machine/toolholder setups, refer to Metav Werkzeuge’s technical advisory. Contact Metav Werkzeuge for machining recommendations and to request batch availability for Walter Tools Tiger‑tec Silver inserts; eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical data SKU: ADMT120408R-F56-WKP35S-WALTER Article designation: ADMT120408R-F56 WKP35S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKP35S Facts Corner radius: 0.8 mm Clearance angle: 15° Insert form: Parallelogram 85° Insert size: 12 Thickness: 04 Chipbreaker: F56 Tolerance class: M Special features Coated carbide grade designed for Stahl and cast iron Stable chip formation and optimised chip control High process reliability in intermittent cutting Suitable for a range of milling applications Robust edge for extended tool life FAQ What materials is this insert suited for? The ADMT120408R-F56 WKP35S insert is designed for machining Stahl (ISO group P) and cast iron (ISO group K), offering wear resistance for abrasive cast materials and edge stability for Stahl. How does the F56 chipbreaker influence machining? The F56 chipbreaker promotes consistent chip segmentation and evacuation, reducing recutting and supporting stable cutting forces during both roughing and finishing passes with the ADMT120408R-F56 WKP35S. What does the 0.8 mm corner radius mean for surface finish? A 0.8 mm corner radius provides a compromise between edge strength and surface quality: it improves tool durability under load while still allowing acceptable surface finishes for many general milling operations. Is the insert suitable for interrupted cuts? Yes, the parallelogram 85° geometry and the coated WKP35S grade are engineered to withstand interrupted cutting conditions and maintain edge security during engagement. How does the 15° clearance angle affect cutting behaviour? The 15° clearance angle reduces rubbing and allows a positive cutting action that helps manage cutting temperatures and extend edge life, especially in mixed-material operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, factory‑new goods of the manufacturer Walter Tools.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com