GX24-2E300N03-UD6 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the coated‑carbide WSM23S grade and the Tiger·tec Silver technology to secure reliable chip control and prolonged cutting‑edge life in demanding turning operations; this combination supports efficient machining of stainless steels and heat‑resistant superalloys and helps maintain process continuity. Order the insert directly via Metav Werkzeuge or ask the consultants for detailed machining recommendations. GX24-2E300N03-UD6 WSM23S – turning indexable insert, Tiger·tec Silver (Walter Tools) The GX24-2E300N03-UD6 WSM23S is an indexable turning insert designed for heavy and demanding applications, optimised for machining stainless steels and heat‑resistant superalloys, with a chipformer tuned to secure consistent chip breakage. Tiger·tec Silver coated carbide grade WSM23S Stable cutting edge for heavy machining Optimised chip control 2E300N03‑UD6 For machining stainless steels and superalloys Maximise tool life with a heat‑resistant grade The combination of the WSM23S cutting grade and Tiger·tec Silver technology provides a balance of hardness and toughness that resists thermal softening and edge wear during prolonged turning cycles. This coated carbide formulation supports secure cutting‑edge stability under high temperatures and adhesive tendency typical of stainless steels, reducing the risk of built‑up edge and frequent insert changes. The result is fewer interruptions and better productivity per machining hour. Consistent chip control for fewer reworks The 2E300N03‑UD6 chipformer is engineered to control chip shape and evacuation in long‑chipping materials, improving coolant access and reducing vibration. Improved chip control leads to a more uniform surface finish and lowers the need for secondary operations. For process planners this means more predictable cycle times and easier parameter transfer between machines, contributing directly to tighter tolerances and less trial‑and‑error at setup. Reliable performance for demanding materials Designed for the ISO groups M (rostfreie Stähle / stainless steels) and S (heat‑resistant superalloys and titanium), this turning insert delivers stable cutting behaviour across a wide materials spectrum. The stable cutting edge and the grade’s resistance to thermal and mechanical wear ensure repeatable results in production runs, supporting higher first‑pass yields and a reduction in overall tooling costs through extended service life. Contact Metav Werkzeuge for tailored machining parameters and application advice on Walter Tools Tiger·tec Silver inserts; call +49 2822 7131930 or eMail info@metav-werkzeuge.com to align the insert choice with specific production goals Technical data Article number: GX24-2E300N03-UD6-WSM23S-WALTER Designation: GX24-2E300N03-UD6 WSM23S Type: Turning indexable insert Facts Grade: WSM23S Series: Tiger·tec Silver Chipbreaker: 2E300N03‑UD6 Applications & features Suitable for: stainless steels (M), heat‑resistant superalloys and titanium (S) Coating/technology: Tiger·tec Silver Material basis: coated carbide Stable cutting edge and optimised chip control FAQ Is this insert suitable for machining stainless steels? Yes. The GX24-2E300N03-UD6 WSM23S is specifically intended for stainless steels (ISO group M), offering thermal resistance and edge stability to counteract adhesion and work hardening. Can the insert handle heat‑resistant superalloys and titanium? Yes. The WSM23S grade is formulated for ISO group S materials, where heat resistance and edge security are critical for consistent machining of superalloys and titanium. What benefit does the Tiger·tec Silver technology bring? Tiger·tec Silver enhances wear resistance and thermal stability of the coated carbide, improving tool life and maintaining a reliable cutting edge under elevated temperatures. How does the 2E300N03‑UD6 chipformer affect production? The 2E300N03‑UD6 chipformer improves chip breaking and evacuation, which reduces vibration and surface variation, leading to fewer secondary operations and more predictable cycle times. Is this insert suitable for heavy‑duty turning operations? Yes. The design emphasises a stable cutting edge and robust chip control, making it well suited to heavy machining conditions where durability and repeatability are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanation purposes only. There is no affiliation between Metav Werkzeuge and the named brands. The offered item is an original, factory‑new product of the manufacturer.
GX24-2E300N03-UD6 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, a WSM33S graded coated carbide and robust chip control for increased process stability and consistent surface quality; request tailored application advice from Metav Werkzeuge to integrate the insert into existing turning operations. Indexable turning insert GX24-2E300N03-UD6 WSM33S (Tiger‑tec Silver) – Walter Tools, for stainless steels and superalloys The GX24-2E300N03-UD6 WSM33S is an indexable turning insert engineered for productive machining of rostfreier Stahl and heat‑resistant superalloys, combining a coated carbide grade with an optimised chipbreaker geometry. Tiger·tec Silver coating for heat resistance WSM33S coated carbide grade Optimised for stainless steels and superalloys Stable cutting edge and secure chip control Increase process reliability with a heat‑resistant coating The GX24-2E300N03-UD6 WSM33S insert uses the Tiger‑tec Silver technology to deliver a coated carbide surface that resists thermal degradation and protects the cutting edge during heavy engagement. The coating reduces edge wear and supports steady cutting conditions, which translates into fewer tool changes and more predictable machining cycles. For production environments that require repeatable results, this brings a clear efficiency gain and helps to maintain consistent workpiece finish. Machining performance for demanding materials Specifically developed for ISO groups M (rostfreie Stähle) and S (heat‑resistant superalloys and titanium), the grade WSM33S promotes secure chip formation and reduces the tendency for built‑up edge when turning tough alloys. The defined chipbreaker 2E300N03‑UD6 geometry supports fragmenting or controlled curling of chips depending on cutting conditions, improving swarf evacuation and reducing risk to the workpiece surface. Translating the insert’s technical design into operational benefit, users experience improved surface quality and a lower scrap rate when processing challenging materials. Practical benefits: handling, lifetime and consistent output Beyond material compatibility, the insert’s stable cutting edge and tailored grade produce longer tool life under elevated temperatures and interrupted cuts, making it suitable for both small batch and continuous production. The design helps to maintain dimensional accuracy over longer tool life, which reduces rework and machine downtime. Combined with standard clamping systems for indexable inserts, handling and replacement remain straightforward, allowing quick index changes and minimal setup disruption while preserving process stability. Contact Metav Werkzeuge for personalised application advice and specify Walter Tools Tiger‑tec Silver inserts to enhance process stability and surface quality; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: GX24-2E300N03-UD6-WSM33S-WALTER ISO designation: GX24-2E300N03-UD6 WSM33S Product type: Indexable turning insert Manufacturer: Walter Tools Grade: WSM33S Series: Tiger·tec Silver Chipbreaker: 2E300N03-UD6 Material groups: S / M UID: GX24-2E300N03-UD6-WSM33S-WALTER Facts Suitable for: rostfreie Stähle (ISO group M) Suitable for: heat‑resistant superalloys and titanium (ISO group S) Coating technology: Tiger·tec Silver Substrate: coated carbide Special features Coated carbide grade WSM33S High thermal resistance and edge stability Optimised chip control geometry Designed for machining hard‑to‑machine materials FAQ What materials is this insert intended for? The GX24-2E300N03-UD6 WSM33S insert is designed primarily for rostfreie Stähle (ISO group M) and heat‑resistant superalloys and titanium (ISO group S). How does the Tiger·tec Silver coating affect tool life? The Tiger·tec Silver coating on the WSM33S grade increases resistance to thermal wear, which typically extends tool life and supports more consistent cutting performance under elevated temperatures. Which chipbreaker is fitted and what is its benefit? The insert features the 2E300N03‑UD6 chipbreaker, engineered to promote secure chip formation and improved swarf evacuation for safer turning operations and better surface finish. Is this insert compatible with standard indexable turning toolholders? The GX24‑2E300N03‑UD6 WSM33S conforms to common indexable insert ISO designations and is suitable for standard turning toolholders that accept this insert geometry. Walter Tools; Tübingen, Germany; www.walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX24-2E300N03-UF4 WKP23S WKP23S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, the WKP23S coated‑carbide grade and optimised chip control for reliable, productive turning of steel and cast iron; order the GX24-2E300N03-UF4 WKP23S directly via Metav Werkzeuge or consult the team for application advice. GX24-2E300N03-UF4 WKP23S — Indexable turning insert for steel and cast iron (Tiger‑tec Silver) by Walter Tools GX24-2E300N03-UF4 WKP23S is an indexable turning insert designed for robust machining of steel and cast iron, combining a coated‑carbide grade with Tiger‑tec Silver technology for sustained performance in production environments. Tiger‑tec Silver coating for improved wear resistance Optimised for steel and cast iron machining Coated carbide grade WKP23S for consistent edge life Stable chip formation and reliable process security Increased productivity through a reliable cutting grade The WKP23S grade, applied on a coated carbide substrate, was developed to deliver consistent edge life under the thermal and mechanical stresses typical of turning steel and cast iron. The industry‑proven Tiger‑tec Silver coating reduces abrasive wear and stabilises the cutting edge, which translates into fewer tool changes and longer uninterrupted runs. For production shops, this means improved machine utilisation and lower handling overhead without sacrificing surface quality. Better chip control and consistent surface finish Designed with the 2E300N03‑UF4 chipbreaker geometry, this insert promotes predictable chip formation and evacuation when turning P (steel) and K (cast iron) material groups. Predictable chips reduce the risk of part damage and tool interference, while the stable cutting behaviour supports a consistent surface finish. For customers with mixed production batches, the insert’s combination of geometry and grade enables reliable results across common ferrous alloys. Practical application and process integration The insert suits both continuous and interrupted turning tasks where material ranges include steel and cast iron as defined in ISO 513. Selection of this insert supports a straightforward tooling strategy: a single grade for broad material coverage, helping to simplify inventory and changeovers. For technical questions or to discuss specific workpiece geometries, the Metav Werkzeuge team is available by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to advise on integration into existing toolholders and cutting parameters. Contact Metav Werkzeuge today for tailored recommendations on the GX24-2E300N03-UF4 WKP23S insert and practical setup guidance for steel and cast iron turning. Technical Data SKU: GX24-2E300N03-UF4-WKP23S-WALTER Designation: GX24-2E300N03-UF4 WKP23S Product type: Indexable turning insert Grade: WKP23S Series: Tiger‑tec Silver Chipbreaker: 2E300N03‑UF4 Material groups: P / K Facts Applicable materials: steel (P), cast iron (K) Coating technology: Tiger‑tec Silver Insert family: GX24 series Special features Coated carbide grade for stable cutting performance Optimised chip control geometry Broad material coverage for production turning Manufacturer: Walter Tools FAQ Which materials can be machined with this insert? The GX24-2E300N03-UF4 WKP23S is intended for machining steel (P) and cast iron (K) in accordance with the ISO 513 material groups. What coating and grade does the insert use? This insert features the Tiger‑tec Silver coating and the WKP23S coated‑carbide grade for improved wear resistance and consistent edge life. How does the chipbreaker affect performance? The 2E300N03‑UF4 chipbreaker promotes controlled chip formation and evacuation, improving process security and helping to maintain surface finish during turning operations. Is the insert suitable for interrupted cuts and general production work? Yes, the combination of grade and chip geometry is designed to handle both continuous and interrupted turning in steel and cast iron production applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any commercial relationship. The offered item is original, brand‑new merchandise supplied by the manufacturer.
GX24-2E300N03-UF4 WSM23S WSM23S Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating with the WSM23S grade yields a robust turning solution that maintains cutting-edge stability and reliable chip formation under thermal stress. Benefit from consistent surface quality and extended tool life in demanding stainless steels and heat-resistant alloys; order through Metav Werkzeuge or consult their technical team for application support. GX24-2E300N03-UF4 WSM23S indexable turning insert, Tiger·tec Silver (Walter Tools) The GX24-2E300N03-UF4 WSM23S is an indexable turning insert engineered for high-temperature, difficult-to-machine materials, offering a combination of wear resistance and edge stability for precision turning operations. Tiger·tec Silver coating for wear resistance WSM23S grade for stable cutting edges Designed for stainless steels and superalloys Consistent chip control and edge stability Stable performance in thermally aggressive machining The combination of the Tiger·tec Silver coating and the WSM23S grade provides a decisive improvement in cutting-edge stability and wear resistance under elevated temperatures. This coated carbide grade is formulated to resist flank wear and crater wear when machining materials that tend to work-harden or generate heat. The result is more predictable tool life and fewer interrupted cycles, which supports higher process reliability and reduces unplanned tool changes. The insert geometry also contributes to steady engagement, helping to maintain dimensional accuracy and repeatable component quality. Reliable processing of stainless steels and superalloys Designed for ISO groups M and S, the insert handles stainless steels and heat-resistant superalloys with improved control of built-up edge and thermal loading. Stainless alloys often present adhesion and toughness challenges; the engineered grade and coating combination promotes a secure chip break and limits edge deformation. For superalloys and titanium, the emphasis is on thermal and mechanical stability: the substrate and coating resist softening and preserve the cutting edge, enabling consistent cutting parameters in serial production and ensuring a reliable machining window for demanding parts. Better chip control and surface finish with UF4 geometry The 2E300N03-UF4 chipbreaker delivers controlled chip formation across a range of feeds and depths of cut, reducing risk of tangling and tool chatter. Improved chip control directly impacts surface quality, cutting forces and downstream handling, lowering secondary process time. When paired with the grade’s thermal resistance, the chipbreaker helps to produce uniform swarf and a stable cutting process that benefits both one-off prototypes and high-volume batches. Operators will notice steadier cutting behaviour and fewer interruptions caused by irregular chips. Process benefits and practical application advice The insert is particularly suited to production turning where productivity and tool life are critical. Stable edge retention reduces the frequency of index changes and supports longer uninterrupted runs, while the coated technology contributes to consistent component finishes. For integration into existing tool programmes, match the UF4 chipbreaker to the intended feed range and adopt coolant and speed settings suited to stainless and superalloy machining to exploit the grade’s strengths. For further process optimisation and parameter recommendations, the Metav Werkzeuge team can provide application-specific guidance. Contact Metav Werkzeuge for tailored guidance on Walter Tools Tiger·tec Silver inserts and to arrange technical consultation or procurement assistance Technical data SKU: GX24-2E300N03-UF4-WSM23S-WALTER Designation: GX24-2E300N03-UF4 WSM23S Type: Indexable turning insert Series: Tiger·tec Silver Grade: WSM23S Manufacturer: Walter Tools Core specifications Applicable ISO groups: M (stainless steels), S (superalloys/titanium) Chipbreaker: 2E300N03-UF4 Material family: coated carbide (described as coated hard metal) Material suitability: stainless steels confirmed Special features Coating technology: Tiger·tec Silver Grade characteristics: WSM23S – coated carbide grade for thermal stability Typical applications: difficult-to-machine stainless steels and heat-resistant alloys Benefits: improved chip formation, stable cutting edge, extended tool life FAQ What materials is this insert suitable for? The GX24-2E300N03-UF4 WSM23S indexable turning insert (Walter Tools) is suitable for ISO group M (stainless steels) and ISO group S (heat-resistant superalloys and titanium). How does the Tiger·tec Silver coating help performance? The Tiger·tec Silver coating on the WSM23S grade improves wear resistance and thermal stability, which preserves the cutting edge during high-temperature machining and extends tool life. What is the role of the UF4 chipbreaker? The UF4 chipbreaker (2E300N03-UF4) provides controlled chip formation, reducing the risk of chip entanglement and improving surface finish and process stability. Can this insert be used for serial production of stainless components? Yes, the WSM23S grade combined with Tiger·tec Silver is engineered for reliable, repeatable performance in serial turning operations on stainless steels and other demanding alloys. Where to get application parameters or ordering information? Metav Werkzeuge can advise on cutting parameters and availability for the GX24-2E300N03-UF4 WSM23S insert and support integration into production processes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
GX24-2E300N03-UF4 WSM33S WSM33S Wendeplatten - Walter Tools
Benefit from a combination of durable coated carbide and stable chip control that increases process reliability when machining demanding alloys; order directly via Metav Werkzeuge or consult our specialists for application advice. GX24-2E300N03-UF4 WSM33S turning insert — Tiger·tec Silver for stainless steels and superalloys (Walter Tools) A GX24-2E300N03-UF4 WSM33S turning insert engineered to deliver consistent performance in the machining of rostfreiem Stahl and high-temperature superalloys Tiger·tec Silver coating for improved wear resistance Designed for machining stainless steels (ISO M) Suitable for superalloys and titanium (ISO S) Stable cutting edge and reliable chip control Boost machining performance and throughput with a coated grade The Tiger·tec Silver series offers a coated carbide grade designed to sustain cutting-edge stability under thermal and mechanical stress. With the WSM33S grade, the insert supports secure chip formation and reduced edge wear, which translates into longer tool life and fewer interruptions for insert changes. For production environments where downtime is costly, this combination of coating technology and grade consistency helps to maintain steady cycle times and predictable component quality. Achieve better surface finishes and process security on difficult materials When working with rostfreiem Stahl and heat-resistant superalloys, the cutting edge is exposed to high adhesion and temperature loads. The insert’s geometry, specified by the 2E300N03-UF4 chipbreaker, promotes controlled chip evacuation and prevents built-up edge formation. As a result, operators can expect improved surface finish and fewer rework cycles. The design reduces the risk of workpiece damage and supports stable machining parameters, which is crucial for series production and precision components. Material compatibility explained for practical setup This grade explicitly covers ISO groups M and S: M denotes rostfreie Stähle, which tend to be tough and generate heat, while S refers to high-temperature superalloys and titanium that demand thermal resistance at the cutting edge. Choosing the WSM33S insert means selecting a geometry and coating tuned to these behaviours. For shops transitioning between stainless and superalloy jobs, the insert offers the flexibility to maintain consistent performance without frequent requalification of cutting data. Operational advantages: reliability, handling and integration The insert is built for integration into standard turning toolholders and is suitable for routine workshop handling. Its robust edge and chip control reduce the frequency of operator intervention and support predictable tool-change intervals. For machining centres seeking to improve overall equipment effectiveness (OEE), the insert contributes to lower scrap rates and steadier throughput. The clear material designation and series labelling simplify inventory management and process planning. Contact Metav Werkzeuge today for tailored cutting data, application recommendations and to secure the GX24-2E300N03-UF4 WSM33S insert for immediate production use Technical Data Article number: GX24-2E300N03-UF4-WSM33S-WALTER Product type: Turning insert (indexable insert) Series: Tiger·tec Silver Grade: WSM33S Geometry / Chipbreaker: 2E300N03-UF4 Facts ISO applicability: M, S Material designation: Coated carbide SKU/UID: GX24-2E300N03-UF4-WSM33S-WALTER Special features Suitable for rostfreiem Stahl (ISO M) Suitable for superalloys and titanium (ISO S) Stable cutting edge and secure chip formation Designed for productive, reliable turning operations Manufacturer: Walter Tools FAQ Which materials are best machined with this insert? The GX24-2E300N03-UF4 WSM33S insert is optimised for rostfreiem Stahl (ISO M) and for high-temperature superalloys and titanium (ISO S), offering reliable chip control in both groups. What does Tiger·tec Silver bring to the tool? Tiger·tec Silver coating on the WSM33S grade enhances wear resistance and thermal stability, which helps maintain cutting-edge integrity during extended runs. Is the insert compatible with standard turning toolholders? Yes, the GX24-2E300N03-UF4 geometry fits common indexable turning holders; confirm holder seat specifications before mounting the insert. How does the chipbreaker influence machining quality? The 2E300N03-UF4 chipbreaker promotes controlled chip formation and evacuation, reducing built-up edge risk and improving surface finish when turning difficult alloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand Walter Tools) with headquarters in Tübingen is part of the Sandvik group. Protected trademarks and trade names belong to their respective owners. Mention of brand names serves explanatory purposes only; there is no connection implied between our company and the manufacturers. The item offered is an original, factory-new product of the stated manufacturer.
GX24-2E300N03-UF4 WSM43S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating and the WSM43S grade for secure chip formation and a stable cutting edge when machining demanding materials; order the insert directly via Metav Werkzeuge or contact the consultants for tailored application advice. GX24-2E300N03-UF4 WSM43S — Indexable Turning Insert, Tiger‑tec Silver (Walter Tools) The GX24-2E300N03-UF4 WSM43S is an indexable turning insert optimised for the machining of rostfreier Stahl and heat‑resistant superalloys, combining a wear‑resistant coating with a geometry designed for reliable chip control. Tiger‑tec Silver coated carbide grade WSM43S Optimised chip control for demanding materials Suited for rostfreier Stahl and superalloys Stable cutting edge for extended tool life Reliable performance on demanding alloys The GX24‑2E300N03‑UF4 WSM43S insert uses the Tiger‑tec Silver coating and a coated carbide substrate to improve thermal resistance and wear behaviour during heavy duty turning. This combination promotes stable cutting edges and reduces the risk of built‑up edge when facing the typical challenges of rostfreier Stahl and nickel‑base superalloys. For production environments that require repeatable results, the coated grade supports consistent tool life and predictable tool changes. Predictable chip control for safer processes Equipped with the 2E300N03‑UF4 chipbreaker and a geometry optimised for turning, the insert offers optimised chip control that helps avoid entangling or long, stringy swarf. Stable chips reduce spindle and toolholder load, contributing to process security and fewer interruptions on the shop floor. The insert design focuses on reliable chip evacuation and contact stability, which benefits cycle time and reduces the need for secondary chip handling. Productivity gains through wear resistance The WSM43S grade is a coated carbide developed to resist the thermal and mechanical stresses typical of machining stainless steels and superalloys. This results in improved flank‑wear behaviour and extended periods between indexings or insert changes. The result is higher machine uptime and more efficient use of tool inventory, translating into measurable productivity improvements in serial turning operations. Practical application guidance and ISO orientation The insert is suited to ISO groups M and S, meaning it is intended for rostfreier Stahl and heat‑resistant superalloys respectively. Selecting the correct cutting parameters and a suitable holder geometry is essential: the coating supports elevated temperatures while the grade maintains edge integrity under interrupted cuts and high contact pressure. For machining strategies, prefer steady feeds with optimized entry angles to exploit the insert’s thermal stability and chip‑forming characteristics. Contact Metav Werkzeuge today to discuss the GX24-2E300N03-UF4 WSM43S from Walter Tools and receive practical application support via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: GX24-2E300N03-UF4-WSM43S-WALTER Name: GX24-2E300N03-UF4 WSM43S Series: Tiger‑tec Silver Manufacturer: Walter Tools Facts Material groups: S / M Special features Coating: Tiger‑tec Silver (coated carbide) Grade: WSM43S Chipbreaker: 2E300N03‑UF4 Application: rostfreier Stahl; superalloys (ISO groups M, S) FAQ Which materials is this insert suitable for? The GX24-2E300N03-UF4 WSM43S insert is designed for rostfreier Stahl and heat‑resistant superalloys, corresponding to ISO groups M and S. What does the Tiger‑tec Silver coating provide? Tiger‑tec Silver coating increases thermal resistance and wear performance on the WSM43S grade, helping to maintain a stable cutting edge under high temperatures. How does the chipbreaker affect machining? The 2E300N03‑UF4 chipbreaker is configured to deliver controlled chips and minimise swarf issues, improving process reliability when turning difficult‑to‑machine alloys. Is this insert suitable for interrupted cuts? Yes; the WSM43S grade and insert geometry are intended to withstand the mechanical stresses of interrupted and heavy‑duty turning in rostfreier Stahl and superalloys. Can the insert be used in automated production environments? The coated carbide grade and optimised chip control make the insert well suited to automated turning where consistent tool life and predictable chip behaviour are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. The mention of Walter Tools is for explanatory purposes only; there is no affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, brand‑new product of the manufacturer. The Walter AG (marketed as Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group.
GX24-2E300N04-UF8 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the combination of high process security, Tiger·tec Silver coating and optimised chip control for reliable, productive turning of demanding materials; order the insert directly via Metav Werkzeuge or consult our application specialists for process-matched recommendations. GX24-2E300N04-UF8 WSM23S turning insert — Walter Tools, Tiger·tec Silver grade for stainless and superalloy turning GX24-2E300N04-UF8 WSM23S is a coated indexable insert designed for heavy-duty turning of stainless steels and heat‑resistant superalloys, providing robust edge life and consistent chip formation Tiger·tec Silver coated for thermal stability WSM23S grade optimised for stainless steels and superalloys 2E300N04-UF8 chipbreaker for stable chip control Robust cutting edge for demanding turning operations Faster, more consistent machining through optimised coating and grade The combination of the Tiger·tec Silver coating with the WSM23S grade delivers a marked improvement in thermal stability and wear resistance compared with conventional coatings. This coated carbide design reduces flank and crater wear during continuous cutting, enabling a higher degree of process security and longer tool life in production environments. For manufacturers processing hard‑to‑machine alloys, the insert reduces unplanned interruptions and supports steady cycle times, contributing to measurable productivity gains. Reliable chip control and geometry that reduce interruptions The integrated 2E300N04-UF8 chipbreaker geometry is engineered for controlled chip formation when machining stainless steels and heat‑resistant alloys. By producing predictable, segmented chips the geometry minimises the risk of entanglement and built‑up edge, which otherwise lead to surface defects and tool change events. In simple terms, the chipbreaker converts complex metal removal behaviour into a stable, repeatable process — an important advantage for serial turning and automated machining cells. Heat resistance and edge robustness for heavy turning operations The insert’s substrate and coating combination emphasise heat resistance and a stable cutting edge, addressing the two main failure modes in severe applications: thermal softening and edge chipping. The TIGER·tec Silver technology balances hardness and toughness so that the cutting edge retains geometry under elevated temperatures common when turning alloys and temperature‑resistant steels. The result is a consistent surface finish and extended service intervals for the toolholder assembly. Designed for application flexibility and straightforward integration Suitable for turning operations on stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), this insert is a versatile choice across workshops that process aerospace, energy and medical components. The insert integrates with standard turning toolholders intended for GX24‑style geometries and can be used for roughing and semi‑finishing cycles depending on the chosen cutting data. For specific cutting parameters or to confirm suitability in a given cell, Metav Werkzeuge’s technical advisers can provide tailored recommendations and cutting data sheets by email or phone. Contact Metav Werkzeuge for tailored application support and to arrange supply of the Walter Tools GX24-2E300N04-UF8 WSM23S insert for demanding stainless and superalloy turning. Technical Data Article number: GX24-2E300N04-UF8-WSM23S-WALTER Product designation: GX24-2E300N04-UF8 WSM23S Product type: Turning indexable insert Facts Series: Tiger·tec Silver Grade: WSM23S Chipbreaker: 2E300N04-UF8 Special features Coating: Tiger·tec Silver Material: Coated carbide Suitable for: stainless steels (ISO M) Suitable for: heat‑resistant superalloys and titanium (ISO S) Application: Heavy turning, stable chip control FAQ What materials is this insert best suited for? The GX24-2E300N04-UF8 WSM23S insert is designed primarily for stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), offering tailored wear resistance for these challenging materials. How does the Tiger·tec Silver coating affect performance? The Tiger·tec Silver coating increases thermal stability and wear resistance, helping the insert maintain a stable cutting edge and longer life under high cutting temperatures typical of stainless and superalloy machining. Which chip behaviour can be expected with the 2E300N04‑UF8 geometry? The 2E300N04-UF8 chipbreaker produces segmented, controllable chips that reduce entanglement and the risk of built‑up edge, improving surface finish consistency and reducing machine downtime. Can this insert be used for both roughing and finishing? Depending on the chosen feed and depth of cut, the insert can be applied to roughing and semi‑finishing; for fine finishing applications a geometry and grade selection should be confirmed with Metav Werkzeuge’s technical team. Is the insert compatible with standard GX24 toolholders? Yes, the insert is intended for GX24‑style toolholders; ensure the selected seat and clamping arrangement match the insert designation for correct seating and performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer.
GX24-2E300N15-RD4 WKP23S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver technology and the WKP23S grade for extended tool life and consistent chip control when machining steel and cast iron; this combination supports productive turning and predictable results. Order the GX24-2E300N15-RD4 WKP23S turning insert directly via Metav Werkzeuge or consult the team for application advice. GX24-2E300N15-RD4 WKP23S — Turning insert for steel and cast iron, Tiger‑tec Silver (Walter Tools) A GX24-2E300N15-RD4 WKP23S turning insert designed for reliable, high‑productivity external turning of unalloyed and alloyed steel as well as cast iron. Tiger-tec Silver coating for long tool life WKP23S grade optimised for steel and cast iron Geometry 2E300N15-RD4 for stable chip control Maximise cutting performance with optimised coating and grade The combination of Tiger‑tec Silver technology and the WKP23S grade provides a balance of wear resistance and toughness that enhances productivity in continuous and intermittent turning operations. By reducing flank and crater wear, the coated carbide substrate prolongs tool life and reduces machine downtime, which translates into lower cost per component. The graded design is tuned to the thermal and mechanical loads typical when machining steel and cast iron, so process parameters remain stable over longer tool life. Consistent chip formation and surface quality through defined geometry The specified geometry 2E300N15‑RD4 offers controlled chip breaking and evacuation, which improves cycle times and reduces the risk of built‑up edge on the cutting edge. With stable chip control, finishing passes achieve improved surface quality without excessive cutting forces. The insert’s edge form and rake design support predictable cutting behaviour, allowing for tighter process windows and repeatable part tolerances in serial production. Broad material compatibility and predictable application range Engineered for the ISO groups P and K, the insert suits a wide range of steels and grey or nodular cast irons, accommodating catalogue‑dependent applications through its versatile performance profile. The WKP23S composition is aimed at abrasive and thermally demanding cuts common in these materials, offering a dependable compromise between wear resistance and fracture toughness. For shops aiming to standardise tooling across several workpiece materials, this insert reduces tool change complexity and inventory variety. For tailored application support or to secure original Walter Tools GX24-2E300N15-RD4 WKP23S inserts, contact Metav Werkzeuge for expert guidance and fast delivery at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: GX24-2E300N15-RD4-WKP23S-WALTER Designation: GX24-2E300N15-RD4 WKP23S Type: Turning insert Facts Series: Tiger-tec Silver Grade: WKP23S Geometry: 2E300N15-RD4 Material suitability: P (steel), K (cast iron) Special features Brand: Walter Tools Coating technology: Tiger·tec Silver Substrate: coated carbide (hardmetal) Application focus: productive turning, stable chip formation FAQ What materials can be machined with this insert? The GX24-2E300N15-RD4 WKP23S insert is suitable for steel (ISO group P) and cast iron (ISO group K), offering reliable performance across these material families. How does the Tiger‑tec Silver technology benefit production? Tiger‑tec Silver coating on the WKP23S grade increases wear resistance and thermal stability, so the insert maintains cutting performance longer and supports consistent production runs. Is this insert suitable for interrupted cuts? Yes, the grade and geometry of the insert are designed to withstand common loads in both continuous and some interrupted turning operations, making it a versatile choice for many shop environments. Which feature primarily improves surface finish? The controlled chip formation from the 2E300N15‑RD4 geometry contributes most to improved surface quality by reducing vibration and preventing built‑up edge during finishing passes. Can this insert be used across different machines and clamping systems? The GX24‑format insert is compatible with standard turning toolholders that accept the GX24 series designation; verify the holder specification for precise fitment. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (marketed as Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names remain the property of their respective owners. The named brand is referenced solely for explanation; there is no affiliation implied with our company, and the offered item is an original, factory‑new product of the manufacturer.
GX24-2E300N15-RD4 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of thermal resistance, stable cutting-edge performance and proven chip control for uninterrupted turning of difficult-to-machine alloys. Order supply directly via Metav Werkzeuge or ask their consultants for application-specific recommendations to integrate the insert into production reliably. GX24-2E300N15-RD4 WSM33S indexable turning insert, Tiger·tec Silver — Walter Tools The GX24-2E300N15-RD4 WSM33S is an indexable turning insert designed for heavy-duty machining of stainless steels and heat-resistant superalloys, offering high thermal stability and consistent chip formation. Tiger·tec Silver coated for heat resistance WSM33S grade for stable cutting edge Optimised for stainless steels and superalloys Precision geometry 2E300N15-RD4 for reliable chips Reduced wear through advanced coating technology The combination of a coated carbide substrate and the Tiger·tec Silver technology increases resistance to thermal degradation, which directly reduces flank and crater wear during prolonged cutting operations. This improved heat tolerance supports stable chip formation and extends tool life in continuous turning of tough materials, lowering frequency of tool changes and helping to maintain a steady production flow. Reliable process results and improved surface quality Materials in ISO groups M (stainless steels) and S (superalloys and titanium) tend to generate heat and work harden; the WSM33S grade is formulated to manage these effects and to deliver consistent performance. The result is enhanced process security and a repeatable surface finish, helping machining centres to meet dimensional and cosmetic tolerances with fewer interventions and less scrap. Geometry and chip control that minimise downtime The specified geometry 2E300N15-RD4 integrates a chipbreaker profile optimised for controlled chip evacuation under higher thermal loads. Effective chip control reduces risks of entanglement and machine stoppages, while the insert form supports stable cutting forces and repeatable engagement at the tool edge—factors that contribute to predictable cycle times and lower overall machining costs. Material compatibility and targeted applications The grade is particularly suitable for difficult-to-machine alloys, notably stainless steels, superalloys and titanium, where heat resistance and edge stability are critical. Production environments that require dependable turning performance for aerospace, energy and specialised engineering components benefit from the combination of the grade’s wear properties and the insert’s chip-management features. Walter Tools backing ensures a consistent manufacturing standard and availability of the Tiger·tec Silver range. Contact Metav Werkzeuge for application-specific advice or to secure supply of Walter Tools Tiger·tec Silver WSM33S inserts and ensure optimal integration into current turning processes. Technical data Article number: GX24-2E300N15-RD4-WSM33S-WALTER Description: indexable turning insert Grade: WSM33S Series: Tiger·tec Silver Geometry/code: 2E300N15-RD4 Material groups: S / M Manufacturer: Walter Tools Facts ISO groups: S, M Suitability: stainless steels (M); superalloys/titanium (S) SKU: GX24-2E300N15-RD4-WSM33S-WALTER Special features Coated carbide Heat-resistant Tiger·tec Silver coating Stable cutting edge and chip control Optimised for heavy-duty turning FAQ What materials is the GX24-2E300N15-RD4 WSM33S best suited for? The GX24-2E300N15-RD4 WSM33S indexable turning insert is optimised for stainless steels and heat-resistant superalloys (ISO groups M and S) and offers reliable performance where thermal stability is required. How does the Tiger·tec Silver technology benefit machining performance? Tiger·tec Silver increases thermal resistance and wear control on the insert, which improves edge life and supports stable chip formation, resulting in fewer tool changes and more consistent production. Can this insert improve surface finish on difficult materials? Yes. The WSM33S grade and the insert geometry are designed to reduce work hardening effects and maintain cutting-edge stability, aiding in the delivery of a repeatable surface finish under challenging cutting conditions. Is the GX24-2E300N15-RD4 geometry suitable for automated production? The 2E300N15-RD4 geometry provides controlled chip evacuation and predictable cutting forces, which contributes to reliable operation in automated turning centres and reduces the likelihood of interruptions. Who supplies this insert and where can technical advice be obtained? This insert is supplied by Walter Tools; Metav Werkzeuge can provide application support and supply coordination for integrating the insert into production workflows. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for explanation only and there is no affiliation between our company and the named manufacturers. The offered item is an original, brand-new product from the respective manufacturer.
GX24-2E300N15-RF7 WSM13S WSM13S Wendeplatten - Walter Tools
Reliable machining performance for demanding materials thanks to the Tiger·tec Silver coating and the WSM13S grade, delivering stable cutting edges and controlled chip formation. Order the insert directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. GX24-2E300N15-RF7 WSM13S — Indexable turning insert, Tiger·tec Silver, for rostfreier Stahl and superalloys (Walter Tools) GX24-2E300N15-RF7 WSM13S is a precision indexable turning insert designed for heavy-duty and difficult-to-machine alloys, offering a coated carbide grade optimised for secure chip control and edge stability. Tiger·tec Silver coated carbide WSM13S Optimised chip control for tough materials Stable cutting edge for high process security Suitable for rostfreier Stahl and superalloys Boosted productivity for hard-to-machine materials The combination of Tiger·tec Silver technology and the WSM13S grade means the insert is engineered for productive turning of challenging alloys. The coated carbide body improves heat resistance and reduces flank and crater wear, which translates into longer tool life and fewer interruptions in production. By stabilising the cutting edge and supporting consistent chip formation, the insert helps maintain output rates under elevated cutting temperatures and stresses typically encountered with rostfreier Stahl and heat‑resistant superalloys. This translates into measurable gains in process reliability and part quality. Reliable chip control and edge life for consistent results A key advantage of this geometry and grade pairing is optimised chip control, reducing the risk of built-up edge and erratic chip formation that can impair surface finish. The 2E300N15-RF7 chipbreaker is tailored to promote predictable chip shapes at typical turning feeds, easing swarf management and machine upkeep. In practice, this means fewer unplanned stops for cleaning or rework and more consistent dimensional repeatability. The insert’s balance between toughness and hardness offers a dependable compromise between resistance to chipping and a durable cutting edge under intermittent or continuous cutting conditions. Clear guidance on applications and material compatibility This indexable insert is especially suited to machining applications involving rostfreier Stahl and high‑temperature alloys such as nickel‑base superalloys and titanium components. The WSM13S grade is a coated cemented carbide developed to address the adhesion and heat‑related challenges of these materials; its use is recommended where secure chip evacuation and a robust cutting edge are priorities. For tool selection, matching the insert geometry and chipbreaker to the workpiece and machining strategy is critical — modest feed increases and appropriate cutting data will extend tool life and improve surface integrity, particularly on demanding alloys. Contact Metav Werkzeuge today for specification matching and availability of the Walter Tools GX24-2E300N15-RF7 WSM13S insert — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data SKU: GX24-2E300N15-RF7-WSM13S-WALTER Label: Drehwendeschneidplatte GX24-2E300N15-RF7 WSM13S Walter Tools Product type: Drehwendeschneidplatte Grade: WSM13S Series: Tiger-tec Silver Chipbreaker: 2E300N15-RF7 Facts Net price: 25.92 Material designation: S / M Special features Coated cemented carbide (Tiger·tec Silver) Optimised for secure chip formation Designed for rostfreier Stahl, superalloys and titanium (dependant on geometry) Stable cutting edge for high process security Developed for productive turning of difficult materials FAQ What materials is this insert intended for? The GX24-2E300N15-RF7 WSM13S insert is intended for rostfreier Stahl and heat‑resistant superalloys, with capability for titanium depending on the cutting geometry. How does the Tiger·tec Silver coating benefit tool life? The Tiger·tec Silver coating enhances heat resistance and reduces wear on the cutting edge, improving the life span of the Walter Tools insert under elevated temperatures. Which chipbreaker is fitted and what does it do? The insert uses the 2E300N15-RF7 chipbreaker, which promotes stable, controllable chips and eases swarf management during turning operations. Is this insert suitable for interrupted cuts? The WSM13S grade offers a balance of toughness and hardness that supports interrupted cutting conditions while maintaining edge stability. Can the insert improve surface finish on difficult alloys? Yes; the combination of grade and coating is designed to reduce built-up edge and promote consistent cutting action, contributing to improved surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no association between our company and the mentioned brands. The offered item is an original, factory‑new product from the manufacturer Walter Tools.
GX24-2E300N15-RF7 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver wear resistance and an optimised chipformer 2E300N15-RF7 for stable machining of stainless steels and heat-resistant alloys; order directly via Metav Werkzeuge or request application advice from our consultants. GX24-2E300N15-RF7 WSM23S — turning indexable insert, Tiger·tec Silver, Walter Tools The GX24-2E300N15-RF7 WSM23S is a turning indexable insert designed for secure chip control and robust edge stability when machining stainless steels and superalloys Tiger·tec Silver coating for longer tool life Optimised chipformer 2E300N15-RF7 for consistent chip control Suited to stainless steels and heat-resistant superalloys Walter Tools quality for repeatable production results Increased process reliability for demanding materials The Tiger·tec Silver coating combined with the WSM23S grade provides a balanced solution for materials that challenge conventional grades. Coated carbide construction enhances thermal resistance and reduces adhesive wear, which in turn supports a stable cutting edge during interrupted or high-heat cuts. This stability translates into fewer regrinds and more predictable tool performance, so cycle times become more consistent and scrap is reduced. The result is a measurable improvement in production reliability when machining tough materials. Better chip control and improved surface quality The integrated chipformer 2E300N15-RF7 is tailored to break and evacuate chips reliably in the machining of stainless steels and superalloys. Effective chip control reduces the risk of recutting and part damage, thereby improving the surface finish and minimising secondary operations such as manual deburring. For workshop environments where repeatability matters, the geometry reduces vibration and protects the cutting edge, contributing directly to fewer interruptions and higher net productivity. Simple integration and consistent performance Designed as a standard turning insert, the geometry enables straightforward clamping in common toolholders and series tool bodies. The use of a recognised Walter Tools grade supports predictable wear behaviour and easier process parameter setting across batches. With this combination, milling and turning operations see improved uptime and a more stable process window, which benefits production planning and cost-efficiency. The overall profile is aimed at delivering both performance and reliable repeatability in series production. Contact Metav Werkzeuge for a tailored application recommendation and secure Tiger·tec Silver inserts for high-demand stainless and superalloy turning tasks — Metav Werkzeuge provides expert advice and direct supply. Technical data Article number: GX24-2E300N15-RF7-WSM23S-WALTER Designation: GX24-2E300N15-RF7 WSM23S Product type: Drehwendeschneidplatte (turning indexable insert) Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WSM23S Chipformer: 2E300N15-RF7 Material group: S / M Core data No numerical machining parameters provided Special features Coated carbide grade Optimised chip control geometry Suitable for stainless steels (M) and heat-resistant superalloys (S) Designed for secure edge stability and reduced built-up edge Intended for productive turning applications FAQ What materials is this insert suitable for? The insert is specified for stainless steels and heat-resistant superalloys; the WSM23S grade and Tiger·tec Silver coating address the thermal and mechanical demands of these materials. How does the 2E300N15-RF7 chipformer affect machining? The 2E300N15-RF7 chipformer improves chip control and evacuation, which enhances surface finish and reduces the risk of recutting during turning operations. Is the insert compatible with standard toolholders? Yes, the geometry is designed for common turning toolholders; the indexable format allows straightforward clamping and repeatable positioning. What benefits does the Tiger·tec Silver series provide? Tiger·tec Silver offers increased thermal resistance and wear protection compared with uncoated grades, supporting longer tool life and more stable cutting edges under elevated temperatures. Can this insert be used for interrupted cuts? The combination of coated carbide and robust chipformer geometry provides improved edge stability suitable for many interrupted cutting scenarios in stainless steels and superalloys. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is an original, brand-new product from the manufacturer.
GX24-2E300N15-RF8 WSM13S WSM13S Wendeplatten - Walter Tools
Die Kombination aus der Tiger·tec Silver-Beschichtung und der WSM13S-Sorte sorgt für hohe Standzeiten und stabile Spanbildung bei der Zerspanung anspruchsvoller Werkstoffe; das Ergebnis ist eine konstante Produktivität und planbare Prozesse. Bestellungen oder technische Anfragen können direkt über Metav Werkzeuge erfolgen oder die Fachberatung in Anspruch genommen werden. GX24-2E300N15-RF8 WSM13S — Walter Tools indexable turning insert, Tiger·tec Silver for rostfreier Stahl and superalloys GX24-2E300N15-RF8 WSM13S is an indexable turning insert engineered for demanding turning operations, combining a robust chipbreaker geometry with a wear-resistant coating for improved edge stability Tiger·tec Silver coated grade WSM13S Suitable for rostfreier Stahl and superalloys Geometry 2E300N15-RF8 for controlled chip formation High edge stability for tough materials The Tiger·tec Silver coating paired with the WSM13S grade delivers a wear-resistant cutting edge designed for prolonged performance when machining difficult-to-cut alloys. The combination of a coated hardmetal substrate and optimised microstructure reduces flank wear and supports a stable chip formation, which helps to maintain component tolerances over longer tool life. For operations involving rostfreier Stahl or heat-resistant superalloys, this means fewer tool changes and more predictable process throughput. Predictable productivity and reduced downtime With a focus on process reliability, the insert’s material and finish aim to lower the frequency of interruptions caused by edge breakouts or sudden flank wear. The insert’s characteristics contribute to consistent surface quality across serial production and allow for more accurate cycle-time planning. As a result, machining setups that demand repeatability profit from less scrap and improved overall equipment efficiency while maintaining tight dimensional requirements. Better surface finish through controlled chip management The chipbreaker geometry 2E300N15-RF8 promotes controlled chip flow and heat distribution during turning, which supports improved surface integrity on the workpiece. By guiding chips away from the cutting zone and limiting built-up edge formation, the insert helps to produce a smoother finish on components made from rostfreier Stahl and other tough materials. This technical behaviour reduces the need for secondary finishing in many cases and supports higher first-pass yield. Application guidance and pairing recommendations Designed for heavy-duty and finish turning of materials in ISO groups M and S, the insert performs reliably in operations where temperature resistance and edge strength are essential. The indexable design allows economical use of multiple cutting edges before replacement. For machine-specific cutting data or to determine the ideal insert geometry for a particular turning task, Metav Werkzeuge can provide application-oriented recommendations and cutting parameters tailored to the toolholder and machine. For application-specific data, availability or to source Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for expert advice and fast support Technical Data Article number: GX24-2E300N15-RF8-WSM13S-WALTER Product type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM13S Geometry / chipbreaker: 2E300N15-RF8 ISO designation: GX24-2E300N15-RF8 WSM13S Material groups: S / M Facts No numerical data specified in the provided dataset Special features Coated hardmetal grade Optimised chip control for controlled cutting Suited for rostfreier Stahl and heat-resistant superalloys Designed for stable cutting edge and long tool life Indexable multi-edge insert for economical use FAQ What materials is the GX24-2E300N15-RF8 WSM13S suited for? The GX24-2E300N15-RF8 WSM13S is specified for ISO groups M and S, meaning it is suitable for rostfreier Stahl and heat-resistant superalloys (including titanium alloys depending on geometry). What advantage does the WSM13S grade offer? WSM13S is a Walter coated carbide grade within the Tiger·tec Silver platform, offering enhanced wear resistance and improved edge stability for machining demanding materials. Which machining tasks are typical for this insert? The insert is intended for turning operations that require robust chip control and temperature-resistant cutting edges, such as semi-finish and finish turning of difficult-to-cut alloys. How does the 2E300N15-RF8 chipbreaker help the process? The 2E300N15-RF8 geometry promotes controlled chip flow and reduced built-up edge, contributing to consistent surface quality and less secondary finishing. Is the insert indexable and economical to use? Yes, the insert is an indexable type with multiple cutting edges; its coated grade and chipbreaker design support longer tool life and cost-effective edge usage. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
GX24-2E300N15-RF8 WSM23S WSM23S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Silver coating and the robust WSM23S grade for extended edge life and reliable chip formation when machining difficult materials; order the GX24-2E300N15-RF8 WSM23S indexable turning insert directly via Metav Werkzeuge or consult the technical team for application advice. GX24-2E300N15-RF8 WSM23S indexable turning insert – Tiger·tec Silver for rostfreier Stahl and superalloys (Walter Tools) A GX24-2E300N15-RF8 WSM23S indexable turning insert engineered for secure chip control and thermal resistance in the machining of rostfreier Stahl and heat‑resistant alloys. Tiger·tec Silver coating for heat resistance WSM23S grade for heavy‑duty performance Stable chip control with 2E300N15‑RF8 geometry High thermal resistance for demanding materials The combination of the Tiger·tec Silver coating and the WSM23S coated carbide grade delivers measurable advantages when processing rostfreier Stahl and heat‑resistant superalloys. The coating technology increases thermal stability and reduces crater wear, which in turn extends the usable life of the cutting edge under high temperatures. For manufacturing environments where tool change intervals impact throughput, this translates into improved process reliability and lowered downtime. The insert’s construction supports a controlled wear pattern, enabling consistent part quality across production runs. Precise chip control and edge stability for safer machining The dedicated chipbreaker geometry 2E300N15‑RF8 is designed to produce short, predictable chips in demanding cuts, supporting continuous removal without entanglement. Combined with the insert’s coated carbide substrate, this geometry promotes stable chip control and reduces the risk of built‑up edge formation that commonly affects rostfreie Materialien. Improved chip formation not only aids operator safety but also helps maintain surface finish and dimensional consistency, which is crucial for serial production and parts destined for assembly. Integration into tool systems and production workflows As an indexable turning insert, the component is compatible with standard clamping systems and allows rapid indexing to a fresh cutting edge, supporting lean tool management and consistent cycle times. The unit’s design supports repeatable positioning, which benefits CNC setups that demand tight tolerances. For process integration, Metav Werkzeuge can supply geometry recommendations and cutting data for optimised feeds and speeds; consultation ensures the insert fulfils specific machining strategies without unnecessary trial‑and‑error. The result is a balance of productivity and tool life tailored to industrial turning tasks. For tailored application support or to discuss the GX24-2E300N15-RF8 WSM23S insert for specific rostfreier Stahl or superalloy operations, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: GX24-2E300N15-RF8-WSM23S-WALTER Description: Drehwendeschneidplatte / indexable turning insert Series: Tiger·tec Silver Grade: WSM23S ISO designation: GX24-2E300N15-RF8 WSM23S Manufacturer: Walter Tools Core data Material group: S / M Geometry: 2E300N15‑RF8 Product type: indexable turning insert SKU: GX24-2E300N15-RF8-WSM23S-WALTER Special features Coating technology: Tiger·tec Silver Substrate: coated carbide Suitable for: rostfreier Stahl (M) and heat‑resistant alloys (S) Application focus: heavy‑duty turning, secure chip formation Brand: Walter Tools FAQ What materials is this insert designed for? The GX24-2E300N15-RF8 WSM23S from Walter Tools is designed primarily for rostfreier Stahl and heat‑resistant superalloys; the WSM23S grade supports secure chip formation in these groups. How does the Tiger·tec Silver coating improve performance? Tiger·tec Silver increases thermal resistance and reduces wear on the cutting edge, helping the WSM23S grade maintain cutting stability and extend tool life under elevated temperatures. Is the 2E300N15‑RF8 geometry suitable for finishing cuts? The 2E300N15‑RF8 geometry is optimised for controlled chip breaking and can be used in finishing operations where stable chips and good surface quality are required, depending on cutting parameters. Can the insert be reindexed to present a fresh edge? Yes, the unit is an indexable turning insert designed for rapid indexing to a new edge, supporting consistent dimensional results and reduced setup time. Which toolholders are compatible with this insert? Compatibility depends on the clamping system and holder family; the GX24-2E300N15-RF8 WSM23S follows standard indexable insert geometries and is typically used with matching Walter Tools holders. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no connection between Metav Werkzeuge and the named brands. The offered article is original, brand‑new goods from the manufacturer.
GX24-2E300R6-CE4 WKP23S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKP23S grade for longer tool life and reliable chip control; combined with the optimised 2E300R6-CE4 chipbreaker geometry, this insert supports stable, productive turning of Stahl and Gusseisen — order directly via Metav Werkzeuge or request consultancy if required. GX24-2E300R6-CE4 WKP23S turning indexable insert — Tiger·tec Silver for Stahl and Gusseisen | Walter Tools The GX24-2E300R6-CE4 WKP23S is a coated turning insert engineered for demanding turning operations on Stahl (P) and Gusseisen (K), combining robust wear resistance with consistent chip control Tiger·tec Silver coating for extended tool life Optimised 2E300R6-CE4 chipbreaker geometry Suitable for Stahl and Gusseisen machining Walter Tools grade WKP23S for consistent wear Higher productivity through a durable coating The insert utilises the Tiger·tec Silver coating applied to a coated carbide substrate, providing improved thermal resistance and wear protection. This material combination reduces flank wear under continuous cutting, which translates into longer tool life and fewer tool changes per shift. With the WKP23S grade, the focus is on reliable performance in general turning tasks; the coating reduces adhesive and abrasive wear mechanisms so that cycle times stay stable and process interruptions are minimised. The result is measurable productivity gains and predictable tool-change intervals. Predictable chip control and better surface quality The 2E300R6-CE4 chipbreaker geometry is designed for controlled chip formation during turning of Stahl and Gusseisen, improving evacuation and reducing the risk of built-up edge. Controlled chips decrease vibration and help to maintain a consistent cutting zone, which directly benefits surface finish and dimensional repeatability. For users less familiar with machining codes: P denotes suitability for Stahl (unalloyed and alloyed steels) and K denotes suitability for Gusseisen; the insert’s geometry and grade are balanced to address the typical heat generation and chip behaviour of these groups. Process security and application guidance Walter Tools’ development of the WKP23S grade places emphasis on stable cutting edges and repeatable performance. In practice, this means fewer unexpected tool failures and improved batch-to-batch consistency. The insert supports a range of turning operations where balanced wear resistance and chip control are priorities. When integrating into production, consider standard cutting parameters for the workpiece material and adjust feeds and speeds in small increments while monitoring tool wear; the stable characteristics of the grade enable a controlled optimisation curve and reduce the risk associated with process changes. Contact Metav Werkzeuge today for tailored application advice and to secure the Walter Tools GX24-2E300R6-CE4 WKP23S insert for production-critical turning tasks Technical data Article number: GX24-2E300R6-CE4-WKP23S-WALTER SKU: GX24-2E300R6-CE4-WKP23S-WALTER Product: Drehwendeschneidplatte / turning indexable insert Manufacturer: Walter Tools Facts Series: Tiger·tec Silver Grade: WKP23S Chipbreaker: 2E300R6-CE4 Material compatibility: Stahl (P), Gusseisen (K) Special features Coated carbide grade Optimised chip control geometry Suitable for turning applications Stable cutting edge and consistent wear FAQ Which materials is the insert suitable for? The GX24-2E300R6-CE4 WKP23S insert is suitable for machining Stahl (P) and Gusseisen (K), as indicated by its grade and chipbreaker design. What advantage does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating increases thermal and wear resistance, extending tool life and improving process stability for turning operations. How does the 2E300R6-CE4 chipbreaker affect machining? The 2E300R6-CE4 chipbreaker promotes controlled chip formation and evacuation, reducing vibration and supporting a better surface finish. Is the WKP23S grade suitable for serial production? Yes, the WKP23S grade from Walter Tools is designed for consistent wear behaviour, making it appropriate for repeatable, serial turning processes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, brand-new goods of the manufacturer.
GX24-2E318N02-UF8 WSM23S WSM23S Wendeplatten - Walter Tools
High-performance turning insert combining Tiger·tec Silver coating and the WSM23S grade to secure stable cutting edges and improved chip control when machining stainless steel and heat‑resistant alloys. Order the insert directly via Metav Werkzeuge or consult their technical advisors for application support. GX24-2E318N02-UF8 WSM23S – Drehwendeschneidplatte (Tiger·tec Silver) for stainless steel and superalloys by Walter Tools The GX24-2E318N02-UF8 WSM23S is an indexable turning insert optimised for demanding turning tasks in stainless steel and heat‑resistant superalloys, combining a high‑temperature coating with a geometry tuned for reliable chip formation Tiger·tec Silver coating for heat-resistant cutting WSM23S grade for stable cutting edges Optimised chipformer 2E318N02-UF8 for secure chip control Ideal for stainless steel and superalloys Reliability for hard-to-machine materials that stabilises production The combination of the Tiger·tec Silver coating and the WSM23S carbide grade provides enhanced heat resistance and edge stability, which directly benefits machining of stainless steel and superalloys. The coating reduces thermal softening of the cutting edge, leading to more consistent tool life and fewer unplanned tool changes. For process planning, this means fewer interruptions and a more predictable production flow, particularly on operations where material adhesion and work‑hardening are critical concerns. Chip control and geometry that reduce rework and downtime The specified chipformer 2E318N02‑UF8 is designed to promote controlled chip breakage and evacuation under typical turning conditions for these material groups. Controlled chip behaviour lowers the risk of surface damage and tool wear escalation, which improves surface finish and reduces secondary operations. In practice, this geometry helps maintain stable cutting forces and supports reliable repeatability across workpieces, enabling higher first‑pass quality and reduced cycle time variability. Process security and productivity advantages for industrial workshops As part of the Tiger·tec Silver series, this insert supports higher cutting temperatures and extended cutting times compared with uncoated grades, resulting in better overall productivity and fewer tool interventions. The material group compatibility (S / M) indicates suitability for both stainless steel and heat‑resistant superalloys or titanium, allowing a single grade to cover multiple applications and simplifying inventory management. The outcome is improved machine uptime and consistent component quality across batch‑sized production. Contact Metav Werkzeuge for tailored application advice and to arrange procurement of Walter Tools inserts; technical consultants are available by e‑mail or phone for process recommendations Technical Data Article number: GX24-2E318N02-UF8-WSM23S-WALTER Designation: GX24-2E318N02-UF8 WSM23S Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts Grade / Sort: WSM23S Series: Tiger·tec Silver Chipformer: 2E318N02-UF8 Special features Material groups: S / M Application: stainless steel; heat‑resistant superalloys and titanium depending on geometry Coating: Tiger·tec Silver Optimised for stable chip formation and edge life FAQ What materials is this insert suitable for? The GX24-2E318N02‑UF8 WSM23S insert is suitable for stainless steel and for heat‑resistant superalloys (material groups S / M), with performance depending on the chosen geometry. How does the Tiger·tec Silver coating improve performance? Tiger·tec Silver increases thermal resistance and reduces edge softening, so the WSM23S grade maintains a stable cutting edge for longer under elevated temperatures. Is this insert intended for finishing or roughing operations? The insert geometry and WSM23S grade are balanced to offer stable performance across both finishing and more demanding roughing cuts in stainless steel and similar alloys. Which chipformer does the insert use and why does it matter? The insert uses the 2E318N02‑UF8 chipformer; it promotes controlled chip breakage and evacuation, which reduces surface damage and tool wear escalation during turning. Can this grade reduce tooling variety in a workshop? Yes, the WSM23S grade covers both stainless steel and certain superalloys, allowing consolidation of tooling stocks for similar applications while maintaining process reliability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only and do not imply any affiliation with the manufacturer. The offered article is an original, factory‑new product of the stated brand.
GX24-2E318N03-UD4 WKP23S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Silver coating and the WKP23S grade for stable machining of steel and cast iron; the result is longer tool life and consistent component quality. Order the GX24-2E318N03-UD4 WKP23S directly via Metav Werkzeuge or ask the consultants for application support. GX24-2E318N03-UD4 WKP23S indexable turning insert — Tiger·tec Silver, chipbreaker 2E318N03-UD4 — Walter Tools A GX24-2E318N03-UD4 WKP23S indexable turning insert engineered for efficient medium-to-high-speed turning of steel and cast iron in serial production. Tiger·tec Silver coating technology Optimised for steel and cast iron machining Chipbreaker 2E318N03-UD4 for stable chips High process reliability from Walter Tools Consistent cutting performance through advanced coating The Tiger·tec Silver coating on this insert delivers improved wear resistance and thermal stability compared with uncoated grades, which translates into longer tool life and fewer tool changes. The coated carbide substrate maintains cutting-edge integrity under the typical heat and stress of steel turning, so machining cycles remain predictable. This consistency supports higher machine utilisation and reduces unscheduled downtime, a decisive benefit for production environments that prioritise throughput and repeatable part quality. Controlled chips and safer production with a dedicated chipbreaker Equipped with the chipbreaker 2E318N03-UD4, the insert produces short, segmented chips for safer evacuation and reduced entanglement at the workpiece. Stable chip formation improves operator safety and keeps coolant flow and chip conveyors working efficiently, while also aiding a superior surface finish by preventing chip re-cutting. The deliberate geometry of the chipbreaker supports consistent results across varying cut depths and feeds, helping to maintain cycle time and reduce secondary operations linked to poor chip behaviour. Versatile WKP23S grade for steels and cast irons The WKP23S grade is optimised for the ISO material groups P (steel) and K (cast iron), offering broad applicability across unalloyed and alloyed steels as well as many grey and nodular cast irons. This versatility simplifies tooling stocks: one grade covers multiple workpiece materials while still delivering the process reliability expected in professional turning applications. For users moving between component families, the grade’s balanced resistance to abrasive wear and thermal load reduces the need for frequent requalification of cutting data. Integration into tool systems and practical benefits on the shop floor The GX24 insert geometry fits standard indexable turning toolholders designed for this style of insert, enabling quick indexing and minimal setup time. The insert’s combination of coated carbide construction and precision ground seats ensures repeatable positioning and stable cutting conditions, which reduces vibration and improves surface quality. When integrated into a controlled machining strategy, this solution contributes to lower overall production costs through extended tool life, fewer interventions and predictable part tolerances. Contact Metav Werkzeuge for technical advice and availability of the GX24-2E318N03-UD4 WKP23S indexable insert from Walter Tools. Email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable toolholders and delivery options Technical Data Article number: GX24-2E318N03-UD4-WKP23S-WALTER Article name: Drehwendeschneidplatte GX24-2E318N03-UD4 WKP23S Walter Tools Manufacturer: Walter Tools Facts Series: Tiger-tec Silver Grade: WKP23S Chipbreaker: 2E318N03-UD4 Material suitability: P / K (steel / cast iron) Special features Material: coated carbide Application: turning (indexable insert) Geometry: GX24 style insert designation Suitability: designed for medium-to-high-speed turning FAQ What materials is this insert suitable for? The GX24-2E318N03-UD4 WKP23S insert is suitable for ISO groups P (steel) and K (cast iron), offering a balanced performance across these materials. What is the advantage of the Tiger·tec Silver series? The Tiger·tec Silver series delivers enhanced wear resistance and thermal stability, extending the service life of the insert and improving process consistency. How does the chipbreaker 2E318N03-UD4 affect machining? The 2E318N03-UD4 chipbreaker promotes short, controlled chips that aid chip evacuation, improve surface finish and reduce the risk of chip-related interruptions. Is the insert compatible with standard GX24 toolholders? Yes, the insert follows the GX24 geometry and is intended for use with corresponding indexable turning toolholders for straightforward integration. What benefits does the WKP23S grade provide for production runs? WKP23S combines abrasion resistance and edge life suitable for serial production on steel and cast iron, supporting longer intervals between tool changes and consistent part quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original factory-new goods of the manufacturer (Walter Tools).
GX24-2E318N03-UF4 WKP23S Wendeplatten - Walter Tools
Take advantage of the WKP23S grade and the Tiger·tec Silver technology for a combination of longer tool life and reliable chip control in daily turning operations; the insert is optimised for steel and cast iron, enabling consistent productivity and reduced rework. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. Indexable turning insert GX24-2E318N03-UF4 WKP23S — Tiger·tec Silver (Walter Tools) The Indexable turning insert GX24-2E318N03-UF4 WKP23S is a coated carbide grade developed for productive turning of steel and cast iron, offering robust edge stability in serial and batch machining. Tiger·tec Silver coating for longer tool life WKP23S grade tailored for steel and cast iron Stable chip control for consistent surface finish Suitable for high-speed and productive turning Higher uptime through coated-grade endurance The combination of Tiger·tec Silver technology and the WKP23S carbide grade delivers measurable improvements in tool life and edge stability. The advanced coating reduces abrasive wear and thermal degradation during turning, which translates into fewer insert changes and longer uninterrupted production periods. For operations that prioritise repeatable component quality, this insert reduces unexpected downtime and supports a predictable machining rhythm. Controlled chips and improved surface quality The built-in chipformer 2E318N03-UF4 promotes reliable chip control, limiting entanglements and enabling safer, higher-feed cuts. Consistent chip breaking reduces the need for manual intervention and lowers the risk of surface marks from errant chips. As a result, secondary finishing steps are less frequent and surface integrity is maintained across long production runs, supporting tighter process tolerances and less rework. Economical cutting with stable wear behaviour Designed for productive machining, the grade offers wear resistance that maintains cutting geometry over longer tool life. This stability supports cost-effective turning by spreading tooling cost over more components and by reducing machine idle time for insert changes. When process planners aim for efficient throughput, the insert’s combination of coating and carbide chemistry enables confident planning of cutting intervals and inventory levels. Application guidance aligned with ISO material groups The insert is specified for materials in ISO group P (steel) and K (cast iron), reflecting its balanced resistance to the typical heat and abrasion encountered with these workpiece families. The ISO classification clarifies suitability: P denotes a focus on steels where heat development and continuous chips occur, while K indicates adaptation to the abrasive and often discontinuous chipping of cast iron. For selection, pair the insert with a compatible turning grade and the correct toolholder geometry to exploit its chipformer and achieve the stated surface quality benefits. For application-specific recommendations and fast procurement of Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge for expert consultation and delivery arrangements via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: GX24-2E318N03-UF4-WKP23S-WALTER Description: Indexable turning insert GX24-2E318N03-UF4 WKP23S Product type: Indexable turning insert Facts ISO material groups: P, K Grade: WKP23S Series: Tiger·tec Silver Special features Coating/technology: Tiger·tec Silver Carbide grade: WKP23S Chipformer: 2E318N03-UF4 Suitable for: steel (P), cast iron (K) Product family: Tiger‑tec Silver turning grades FAQ What materials is this insert suitable for? The insert is suitable for machining steel and cast iron, corresponding to ISO groups P and K as specified for the GX24-2E318N03-UF4 WKP23S. What does the Tiger·tec Silver designation mean? Tiger·tec Silver denotes the coating technology applied to the insert; it improves wear resistance and thermal stability to extend service life under typical turning conditions. How does the chipformer designation affect cutting? The chipformer 2E318N03-UF4 is designed to produce short, manageable chips during turning, which supports consistent surface finish and safer chip handling in automated or manual setups. Is this insert intended for high-speed turning? The construction and coating of the grade support productive, high‑speed turning operations where stable edge wear and chip control are required. Which product family and grade should be chosen for general steel turning? For general steel turning, the Tiger·tec Silver family with the WKP23S grade is a robust choice, combining thermal resistance and controlled wear for repeatable machining performance. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX24-2E318N03-UF4 WSM43S WSM43S Wendeplatten - Walter Tools
Take advantage of a coated carbide grade designed for demanding turning jobs and a geometry optimised for chip control to reduce interruptions in production. The combination of Tiger·tec Silver technology and the WSM43S grade delivers consistent edge stability for machining stainless steel and heat‑resistant alloys. Order the GX24-2E318N03-UF4 WSM43S turning insert directly via Metav Werkzeuge or ask our consultants if needed. GX24-2E318N03-UF4 WSM43S turning insert — Tiger·tec Silver by Walter Tools GX24-2E318N03-UF4 WSM43S is a coated turning insert engineered for secure chip formation and edge stability when machining stainless steels and superalloys Tiger·tec Silver coated carbide Stable cutting edge and chip control Designed for stainless steel and superalloys ISO GX24-2E318N03-UF4 geometry Durable coating for predictable production The insert uses a Tiger·tec Silver coating applied to a high‑performance coated carbide substrate. This surface treatment improves thermal resistance and wear behaviour during interrupted cuts and heavy engagement, which translates into more consistent tool life and fewer unscheduled tool changes. The coating is intended to maintain the cutting edge under continuous thermal and mechanical load, supporting reliable batch runs and predictable cycle times. Edge stability and chip control for difficult materials A controlled cutting geometry and dedicated chipformer design provide stable cutting behaviour when machining tough materials. The result is reduced built‑up edge and improved surface finish without aggressive cutting parameters. For production engineers this means a tangible reduction in part rework and downtime, as the insert promotes calm chip flow and a steady cutting force that helps maintain machine dynamics. Optimised for stainless steels and superalloys (ISO groups M and S) The grade is specified for ISO groups M and S: M for stainless steels and S for heat‑resistant superalloys and titanium. These materials tend to work‑harden and generate high cutting temperatures; the WSM43S composition and Tiger·tec Silver layer are designed to support safe chip formation and stable cutting edges under those conditions. When selecting tooling for these workpiece families, this insert provides a balanced compromise between wear resistance and edge toughness. Practical integration and selection guidance The GX24‑style geometry fits standard indexable turning toolholders designed for this insert family; selection should reflect part geometry, depth of cut and anticipated feed rates. The insert’s advantages are most apparent in medium to heavy cross sections and applications where consistent surface quality and process stability are priorities. For optimisation it is advisable to combine the grade with appropriate coolant strategy and a holder that ensures rigid clamping to maximise the benefits of the Tiger·tec Silver technology. For demanding stainless steel and superalloy turning applications, request the Walter Tools GX24-2E318N03-UF4 WSM43S insert from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for cutting data and application advice Technical data Article number / SKU: GX24-2E318N03-UF4-WSM43S-WALTER Product type: Turning insert ISO designation: GX24-2E318N03-UF4 WSM43S Grade: WSM43S Series: Tiger‑tec Silver Facts Material groups: S / M Coating technology: Tiger·tec Silver Geometry / chipformer: 2E318N03‑UF4 Suitable for: stainless steel (M) and superalloys/titanium (S) Special features Coated carbide grade optimised for wear resistance and edge stability Intended for heavy or difficult turning operations Designed for secure chip formation and reduced built‑up edge Walter Tools engineering for consistent performance FAQ What materials is this insert suitable for? The GX24-2E318N03-UF4 WSM43S insert is specified for ISO groups M and S, therefore it is suitable for stainless steels and heat‑resistant superalloys/titanium. What does the Tiger·tec Silver series offer in practice? Tiger·tec Silver provides enhanced thermal resistance and controlled wear behaviour; combined with the WSM43S grade it supports stable cutting edges during demanding turning operations. Which insert geometry does GX24-2E318N03-UF4 represent? The insert geometry GX24‑2E318N03‑UF4 includes a dedicated chipformer (2E318N03‑UF4) tailored for controlled chip flow in medium to heavy cuts. Is this insert intended for finishing or roughing operations? The grade and geometry are best utilised where robust edge stability and good chip control are required, making it appropriate for medium to heavy turning and semi‑finishing where consistent results are needed. How to choose a suitable toolholder for this insert? Select a rigid, correctly sized turning holder designed for GX24 inserts; ensuring proper clamping and alignment enhances the performance of the WSM43S grade and the Tiger·tec Silver coating. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX24-2E318N16-RD4 WKP23S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating and the WKP23S grade for sustained productivity when machining steel and cast iron; the coated carbide construction ensures a stable cutting edge and consistent chip control. Order via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. GX24-2E318N16-RD4 WKP23S — indexable turning insert with Tiger‑tec Silver coating for steel & cast iron (Walter Tools) The GX24-2E318N16-RD4 WKP23S is an indexable turning insert engineered for productive turning operations, combining a coated carbide substrate with Tiger‑tec Silver technology to address the wear mechanisms typical of steel and cast iron machining. Tiger‑tec Silver coating for superior wear resistance WKP23S grade optimised for steel and cast iron Coated carbide for a stable cutting edge life Chipbreaker 2E318N16‑RD4 for controlled chip formation Consistent productivity when machining steel and cast iron The Tiger‑tec Silver series offers a coated carbide formulation designed to resist abrasive wear and thermal loading during steel and cast iron turning. The WKP23S grade is adapted to the characteristic heat and chip formation of these workpiece groups, so the insert provides consistent tool life and repeatable results across batch runs. This translates into fewer insert changes and increased uptime on CNC lathes, supporting steady production throughput without compromising surface finish or dimensional stability. Reliable edge performance and efficient chip control Equipped with the chipbreaker 2E318N16‑RD4, the geometry focuses chip segmentation and evacuation for short, predictable swarf—particularly beneficial in cast iron and varied steel alloys. The combination of geometry and Tiger‑tec Silver coating reduces flank and crater wear, improving the cutting edge life and lowering the frequency of tool interventions. For operations sensitive to cycle time and finish quality, this insert delivers measurable gains in process stability and reduces scrap rates. Simple integration into existing tool systems for improved shop floor efficiency The insert is compatible with standard indexable turning toolholders and integrates easily into existing tool setups, requiring no special adaptation. Its robust coated carbide construction supports a wide range of cutting parameters, enabling higher material removal rates where process conditions permit and offering predictable performance across different steel grades and cast iron variants. The result is a practical choice for production and jobbing environments seeking a balance of productivity and repeatable quality. Application-focused explanation and selection guidance The designation P/K indicates suitability for the ISO workpiece groups P (steel) and K (cast iron); this describes the intended range of application rather than the insert material. The insert is a coated carbide type from the Tiger‑tec Silver series, which uses advanced coating layers to enhance abrasion and thermal resistance. When specifying tooling for a programme that involves mixed steel and cast iron components, choosing a grade like WKP23S helps standardise tooling and reduce inventory complexity while maintaining process reliability. For reliable machining with Walter Tools' Tiger‑tec Silver inserts, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and availability for specific turning applications. Technical data Article number: GX24-2E318N16-RD4-WKP23S-WALTER Name: GX24-2E318N16-RD4 WKP23S Product type: Indexable turning insert Brand: Walter Tools Series: Tiger‑tec Silver Grade: WKP23S Suitable for: Steel (P), Cast iron (K) Facts Material groups: P, K Special features Coating: Tiger‑tec Silver Chipbreaker: 2E318N16‑RD4 Material: coated carbide Series: Tiger‑tec Silver Main application: Steel and cast iron turning FAQ What workpiece materials is this insert suited to? This insert is rated for ISO groups P and K; the GX24-2E318N16-RD4 WKP23S from Walter Tools is therefore suited to machining various steel grades and cast iron. How does the Tiger‑tec Silver coating help performance? The Tiger‑tec Silver coating increases wear and thermal resistance on the coated carbide substrate, which leads to longer tool life and steadier cutting conditions during continuous turning cycles. What advantage does the chipbreaker 2E318N16‑RD4 provide? The chipbreaker geometry promotes short, consistent chip formation and efficient evacuation, improving process stability and surface finish when turning steel and cast iron. Can this insert be used in standard toolholders? Yes, the designation and geometry are compatible with common indexable turning toolholders designed for this insert family, allowing straightforward integration into existing setups. Is this insert suitable for mixed-material production batches? The WKP23S grade is optimised for both steel and cast iron, making it a practical option for shops handling mixed batches where a robust, general-purpose grade is required. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for descriptive purposes only; there is no affiliation between our company and the named brands. The offered article is original, factory‑new merchandise of the manufacturer.
GX24-2E318N16-RF8 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM23S grade for reliable machining of stainless steel and heat‑resistant alloys; the insert delivers stable chip control and prolonged tool life to support continuous production. Order directly via Metav Werkzeuge or consult our specialists for tailored recommendations. GX24-2E318N16-RF8 WSM23S indexable turning insert — Tiger·tec Silver by Walter Tools GX24-2E318N16-RF8 WSM23S is an indexable turning insert from Walter Tools optimized for heavy‑duty machining of stainless steel and heat‑resistant superalloys Tiger·tec Silver coating for long tool life WSM23S grade for stainless steel and superalloys Robust cutting edge with stable chip formation Compatible with GX24-2E318N16-RF8 geometry Consistent performance on difficult‑to‑cut materials The WSM23S grade, embedded in the Tiger·tec Silver family, is a coated carbide solution developed to handle the thermal and mechanical demands of stainless steel and superalloys. As a coated cemented carbide insert, it balances toughness and hardness to resist edge chipping and adhesive wear. The designation ISO M and S indicates suitability for the ISO groups M (stainless steels) and S (heat‑resistant superalloys and titanium), so the material behaviour—tendency to work‑harden or poor thermal conductivity—is addressed by the substrate and coating design. This yields predictable tool life and repeatable component quality. Better chip control and secure cutting edge for higher uptime The geometry code 2E318N16-RF8 integrates a dedicated chipbreaker form that promotes controlled chip segmentation and evacuation, reducing the risk of built‑up edge on stainless steel. Stable chip formation minimises interruptions at the tool‑workpiece interface, keeping cycle times steady and lowering the frequency of tool changes. For production environments where vibration and thermal load vary, this insert offers a secure cutting edge that sustains cutting performance over extended runs, improving overall machine utilisation. Lower cost per part through improved wear resistance A direct benefit of the grade and coating combination is extended tool life and enhanced wear resistance, which together reduce the cost per machined component. The engineered coating lowers abrasive wear while the substrate maintains edge integrity under intermittent thermal peaks. In practice, fewer indexings and less edge preparation mean less operator intervention and a smaller inventory of spare inserts—advantages that translate into measurable savings on repeat turning operations without compromising surface finish or dimensional stability. Seamless integration into existing turning systems Designed for straightforward use in standard indexable turning setups, the insert is compatible with common toolholders and clamping systems that accept the GX24 geometry. Its consistent pocket fit and repeatable seating support fast changeover and reliable concentricity. As a Walter Tools product from the Tiger·tec Silver series, it also benefits from the manufacturer’s focus on process security and edge stability, facilitating predictable results across batch sizes and workpiece variants. For precision machining of stainless steel and superalloys, contact Metav Werkzeuge for ordering and expert application advice: info@metav-werkzeuge.com or +49 2822 7131930. Technical data SKU: GX24-2E318N16-RF8-WSM23S-WALTER Article designation: GX24-2E318N16-RF8 WSM23S Type: indexable turning insert Manufacturer: Walter Tools Facts Geometry code: 2E318N16-RF8 Grade: WSM23S Series: Tiger·tec Silver Material groups: ISO M, ISO S Special features Coating technology: Tiger·tec Silver Substrate: coated carbide Suitable for: stainless steel, superalloys, titanium Function: stable chip formation and secure cutting edge FAQ What workpiece materials is this insert intended for? The GX24-2E318N16-RF8 WSM23S insert is specified for stainless steel and ISO‑S materials, where its WSM23S grade and Tiger·tec Silver coating support controlled chip flow and edge stability. How does the 2E318N16‑RF8 geometry affect machining? The 2E318N16‑RF8 geometry incorporates a chipbreaker that promotes regular chip segmentation and evacuation; this reduces built‑up edge and improves process stability when turning challenging alloys with the Walter Tools insert. Is this insert suitable for high‑temperature alloys like Inconel? Yes. The combination of the WSM23S grade and the series design makes the insert appropriate for many heat‑resistant superalloys in the ISO S group, delivering wear resistance under poor thermal conductivity conditions. Can the insert be used in standard toolholders for GX24 geometry? The insert matches common GX24 seatings and is intended for conventional indexable turning toolholders, offering reliable pocket fit and concentricity when mounted correctly. What benefits does Tiger·tec Silver provide in daily production? Tiger·tec Silver imparts enhanced surface hardness and thermal resistance to the coated carbide, resulting in prolonged tool life, improved wear resistance, and fewer interruptions for changeover when machining stainless steel and hard alloys. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
GX24-2E4.80N WMG40 Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide durability and optimised chip control to maintain stable, productive turning processes; the integrated chipbreaker and Walter-grade composition support consistent results in batch production. Order or request advice directly via Metav Werkzeuge for application guidance and availability. GX24-2E4.80N WMG40 — Indexable turning insert with 2E4.80N chipbreaker, Walter Tools The GX24-2E4.80N WMG40 is a coated indexable turning insert developed for productive metalcutting, offering robust edge stability and a dedicated 2E4.80N chip control geometry for controlled swarf formation in general turning tasks Coated carbide grade WMG40 Chipbreaker 2E4.80N for controlled chips Open series for versatile applications Walter Tools production stability Improved process reliability through targeted chip control The integrated 2E4.80N chipbreaker is designed to break and evacuate chips reliably, reducing the risk of entanglement and machine interruptions. By shaping the swarf flow and reducing long stringing chips, this geometry contributes directly to higher process uptime and fewer secondary operations to clear workpieces. For workshops seeking steady cycle times, the tailored chip control lowers manual intervention and supports safer, more predictable machining sequences. Coated grade engineered for broad performance and wear resistance The insert uses the WMG40 coated carbide grade, a Walter material class that delivers a balance between wear resistance and toughness. The coating enhances high-temperature performance at the cutting edge, extending tool life under mixed turning conditions. For operators unfamiliar with coated alloys, this means less frequent index changes and a reduced need for inventory variety, translating into practical cost-efficiency and steady surface finishes across batches. Practical selection and compatibility for production environments As part of the Walter open series, this insert suits a wide range of standard turning applications, but the exact workpiece compatibility should be verified against the manufacturer's product matrix. The designation indicates the insert geometry and intended chip control rather than specific cutting parameters; therefore, matching feed, cut depth and machine power remains essential for optimum outcomes. For further technical details, material recommendations or cutting data, specialist guidance is available to ensure the grade and chipbreaker meet the intended application. Contact Metav Werkzeuge for tailored cutting data, availability and to discuss how the Walter Tools GX24-2E4.80N WMG40 insert can be integrated into current machining processes; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: GX24-2E4.80N-WMG40-WALTER Label: Drehwendeschneidplatte GX24-2E4.80N WMG40 Walter Tools Product type: Drehwendeschneidplatte (indexable turning insert) Manufacturer: Walter Tools Insert designation: GX24-2E4.80N WMG40 Facts Chipbreaker: 2E4.80N No further numeric specifications provided in dataset Special features Coated carbide grade WMG40 Series: Walter Schneidstoffsorte - Serie offen Chip control geometry for improved swarf management Material designation: Katalogabhängig FAQ What materials is this insert suitable for? The insert with grade WMG40 is a coated carbide type intended for a broad range of turning tasks; suitability for specific materials should be checked against the Walter product matrix for the GX24-2E4.80N WMG40 insert. How does the 2E4.80N chipbreaker affect machining? The 2E4.80N chipbreaker on this turning insert promotes controlled chip formation, reducing stringing and aiding chip evacuation to improve process stability and reduce downtime. Is the insert supplied with a coating? Yes, the WMG40 designation identifies a coated carbide grade, which enhances wear resistance and thermal stability at the cutting edge. Can the insert be used for high-speed turning? Performance at elevated cutting speeds depends on workpiece material and machine setup; the WMG40 grade is engineered for balanced wear resistance and toughness, but cutting parameters should be validated in the specific application. Where can cutting data and compatibility advice be obtained? For tailored cutting data and compatibility information regarding the GX24-2E4.80N WMG40 insert, consult Metav Werkzeuge or refer to Walter Tools documentation for recommended parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only and do not imply any affiliation with our company. The offered item is an original, factory-new product of the named manufacturer (Walter Tools).
GX24-2F300N02EM-1 WBS10 WBS10 Wendeplatten - Walter Tools
Take advantage of the CBN cutting grade WBS10 and the dedicated 2F300N02EM-1 chipbreaker to extend tool life and maintain consistent machining of hardened parts; order the insert via Metav Werkzeuge or consult the specialists for application matching. GX24-2F300N02EM-1 WBS10 — turning indexable insert by Walter Tools with CBN grade for hard materials GX24-2F300N02EM-1 WBS10 is a turning indexable insert designed for high-wear applications, principally in hardened materials and demanding turning processes CBN grade WBS10 for hardened materials Robust 2F300N02EM-1 chipbreaker design Walter CBN / Hartstoff series for process stability Increase uptime with CBN performance for hard turning The insert combines the Walter CBN / Hartstoff series technology with the WBS10 grade to deliver high wear resistance in abrasive and high-hardness environments. CBN (cubic boron nitride) is engineered for cutting applications on hardened steels and, depending on the product matrix, certain cast or superalloy materials. The specified chipbreaker 2F300N02EM-1 helps control chip formation under heavy loading, reducing unexpected interruptions and supporting continuous production. This results in fewer tool changes and more predictable machining cycles. Achieve consistent surface quality and repeatable results The geometry and grade are tuned to provide a stable cutting edge and reproducible dimensional results across batches. Where finishing quality and repeatability are essential, the combination of CBN substrate and the dedicated chip control reduces built-up edge and heat-related deformation. For operations that demand close tolerances in hard material turning, this insert supports consistent part quality while maintaining cycle-time efficiency. Designed for reliable process integration in production The insert is intended for integration into common turning toolholders that accept the GX24-style designation. Its role is to enable productive machining with a focus on process security and reduced variance. Because CBN performance depends on machining parameters and workpiece composition, it is recommended to verify suitability against the specific product matrix and machining strategy. Where applicable, the insert supports higher cutting speeds and stable edge life compared with conventional grades when used in appropriate conditions. Guidance for grade selection and safe application Selection of the right cutting grade is critical when moving to CBN tooling. WBS10 is a Walter-developed CBN grade optimised for abrasive, high-hardness tasks; however, users should confirm compatibility with the exact workpiece material and hardness range. Empirical testing or consultation with tooling experts will help establish cutting data, coolant strategy (if applicable), and holder rigidity required to achieve the projected tool life and surface finish. For application advice or to verify compatibility of the Walter Tools GX24-2F300N02EM-1 WBS10 insert with specific materials and machines, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — the team can recommend setup and cutting data tailored to the production need. Technical Data Article number: GX24-2F300N02EM-1-WBS10-WALTER Product type: Turning indexable insert Insert identification: GX24-2F300N02EM-1 WBS10 Grade: WBS10 Series: Walter CBN / Hartstoff Chipbreaker: 2F300N02EM-1 Manufacturer: Walter Tools Material information (manufacturer): Katalogabhängig Facts SKU: GX24-2F300N02EM-1-WBS10-WALTER Special features CBN cutting grade for hard and high-wear tasks Dedicated chipbreaker geometry for controlled chips Intended for precision turning applications Series positioned for process stability and long tool life FAQ What materials is this insert suitable for? The GX24-2F300N02EM-1 WBS10 insert uses a CBN-based grade intended primarily for hardened steels and high-wear situations; users should verify exact workpiece compatibility against the Walter product matrix. How does the 2F300N02EM-1 chipbreaker influence machining? The 2F300N02EM-1 chipbreaker is designed to produce predictable, segmented chips under heavy cutting, improving evacuation and reducing the risk of re-cutting, which contributes to longer, more stable tool performance. Is coolant recommended when using this CBN insert? Coolant strategies depend on the application and holder design; in many CBN operations dry or minimum-quantity cooling is used, but the final decision should follow testing with the GX24-2F300N02EM-1 WBS10 insert and the selected machining parameters. Can this insert be used for finishing as well as roughing? Yes — with the correct cutting data and machine rigidity, the WBS10 grade can support both roughing and finishing passes, offering consistent surface quality and edge life in hardened material turning. Walter Tools — The Walter AG (brand: Walter Tools) is a recognised supplier of precision cutting tools and is part of the Sandvik group. Protected trademarks and trade names belong to their respective owners. Brand names and protected trademarks are mentioned solely for explanation purposes. There is no connection between our company and the mentioned brands. The offered article is original, factory-new merchandise of the manufacturer.
GX24-2F300N02FS-F1 WDN10 Wendeplatten - Walter Tools
Take advantage of the PKD cutting grade and robust edge life for reliable performance in abrasive non‑ferrous turning; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. GX24-2F300N02FS-F1 WDN10 – turning indexable insert, PKD grade, Walter Tools A GX24-2F300N02FS-F1 WDN10 turning indexable insert engineered for high‑wear resistance in the machining of non‑ferrous and abrasive materials using a polycrystalline diamond cutting grade PKD grade for abrasive non-ferrous materials Long tool life with excellent wear resistance Designed for high-precision turning operations Walter Tools quality and consistent performance Maximise material removal with PKD precision The GX24-2F300N02FS-F1 WDN10 is built around PKD (polycrystalline diamond), a cutting material that offers exceptional hardness and abrasion resistance. For applications such as machining non‑ferrous alloys, graphite and other abrasive, non‑iron materials, this grade delivers a substantially longer service life than conventional carbide inserts. The high surface hardness of PKD reduces flank and crater wear, which translates into fewer interruptions for insert changes and more predictable cycle times in production runs. Predictable edge life to stabilise production costs By focusing on wear resistance and stable cutting behaviour, this insert helps to reduce variability in tool life and minimise unexpected downtime. The insert’s construction supports a consistent edge life, so machining parameters remain stable over longer tool life intervals. This predictability contributes to improved productivity and a clearer cost‑benefit assessment when comparing tooling strategies, especially in longer or repeat batch runs where tooling consistency is critical. Seamless fit into high‑precision turning workflows Designed for integration into standard turning toolholders, the insert supports high‑precision turning tasks where dimensional accuracy and surface finish matter. The specified cutting geometry and grade suit processes that demand close tolerance control and consistent surface quality. Users should verify the intended workpiece and cutting conditions against the product matrix to ensure the best match between insert grade and application, thereby achieving both process security and the desired surface outcome. Practical handling and application guidance Although the insert offers robust wear properties, optimal results depend on correct setup and process settings. Secure mounting in an appropriate toolholder and adherence to recommended feed and speed ranges will preserve the cutting edge and extend service life. Check the supplied product matrix for specific material recommendations and, where applicable, adjust coolant and chip evacuation strategies to complement the PKD performance. Regular inspection of the cutting edge will support safe, continuous operation and predictable tool change intervals. Contact Metav Werkzeuge to discuss how the Walter Tools PKD insert can improve process stability and application fit; technical advice and ordering are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: GX24-2F300N02FS-F1-WDN10-WALTER Product type: Turning indexable insert Manufacturer: Walter Tools Core data SKU: GX24-2F300N02FS-F1-WDN10-WALTER Grade: WDN10 Special features Series: Walter Schneidstoffsorte - Serie offen Cutting geometry: 2F300N02FS-F1 Grade description: PKD (polycrystalline diamond) suited for abrasive non‑ferrous materials Material designation: Katalogabhängig FAQ What is PKD and why is it used for these inserts? PKD stands for polycrystalline diamond; the GX24-2F300N02FS-F1 WDN10 uses PKD to provide exceptional hardness and abrasion resistance, making it suitable for machining abrasive, non‑ferrous materials. Which materials are appropriate for this insert? This insert is designed primarily for non‑ferrous and abrasive materials; suitability should be confirmed against the product matrix for the specific workpiece material before series production. How does the insert improve process stability? The PKD grade and stable cutting geometry of this Walter Tools insert help to reduce wear variability, resulting in more consistent tool life and steadier machining parameters across production runs. Is special tooling required to use this insert? Standard turning toolholders compatible with the insert geometry can be used; correct clamping and adherence to recommended machining parameters are essential to exploit the insert’s wear resistance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
GX24-2F300N02TM-1 WBH20 WBH20 Wendeplatten - Walter Tools
Combining CBN grade WBH20 for high wear resistance with a stable cutting edge and optimised chip control, this insert delivers consistent performance in hard‑turning operations; order directly via Metav Werkzeuge or consult our specialists for process integration. Indexable Turning Insert GX24-2F300N02TM-1 WBH20 – CBN grade for hardened steels (Walter Tools) The Indexable Turning Insert GX24-2F300N02TM-1 WBH20 is a CBN‑based indexable insert engineered for productive hard machining of hardened and pre‑hardened steels. CBN grade WBH20 for hard machining High wear resistance and stable cutting edge Optimised chipformer for consistent results Designed for hardened steels (ISO H) Delivering stable performance for hard turning The WBH20 cutting grade is a CBN cutting material developed for demanding, high‑wear applications. Its composition provides high wear resistance and a stable cutting edge, which reduce flank wear and extend tool life when machining hardened steels. In practical terms, fewer tool changes and longer service intervals improve spindle uptime and lower production interruptions. The insert’s geometry supports predictable engagement with the workpiece, ensuring reproducible results in serial production and finishing tasks. Consistent chip control and surface quality The integrated chipbreaker (designation 2F300N02TM-1) is optimised to produce short, controllable chips under the high cutting forces typical of hard machining. Reliable chip formation contributes to steady cutting forces and enhances process reliability, which in turn helps to maintain surface integrity and minimise rework. For engineers less familiar with CBN, this means the insert converts the abrasive nature of hard materials into manageable chips, enabling stable turning at higher feeds or during extended runs without compromising finish. Application scope and process advice This insert is intended primarily for the machining of hardened and pre‑hardened steels (ISO group H), making it suitable for component finishing, hard turning of bearings, shafts and heat‑treated parts, or where high dimensional stability is required. The Walter CBN / Hartstoff series offers consistent edge behaviour across serial batches, aiding tool‑path planning and cycle time estimation. For tailored process parameters and to align the insert with specific machine or clamping conditions, Metav Werkzeuge’s technical advisors can provide cutting data and optimization tips to achieve the best combination of tool life and surface quality. Contact Metav Werkzeuge for application recommendations and availability of Walter Tools CBN inserts to ensure optimal integration into existing hard‑machining processes. Technical data Article number: GX24-2F300N02TM-1-WBH20-WALTER Product type: Indexable turning insert Designation: GX24-2F300N02TM-1 WBH20 Brand: Walter Tools Facts Grade: WBH20 Series: Walter CBN / Hartstoff Chipbreaker: 2F300N02TM-1 Material group: H (hardened steels) Suitable for pre‑hardened steel: yes Special features CBN cutting material for hard machining High wear resistance and stable cutting edge Optimised chipformer for consistent chip control Designed for productive and repeatable finishing FAQ What materials is this insert suitable for? The insert is suitable for hardened steels (ISO group H) and for pre‑hardened steel applications, with the WBH20 CBN grade specifically developed for hard‑machining tasks. How does the WBH20 grade differ from conventional carbide inserts? WBH20 is a CBN cutting material engineered for high abrasiveness and thermal stability; compared with carbide it offers superior wear resistance and edge stability when turning hard and heat‑treated steels. Which chipbreaker is used and what benefit does it provide? The insert uses the 2F300N02TM‑1 chipbreaker, optimised for short, controllable chips to improve process reliability and surface finish during hard turning. Is this insert suitable for finishing operations? Yes, the controlled edge behaviour and robust CBN grade make this insert well suited to finishing and semi‑finishing of hardened components where dimensional accuracy and surface quality are critical. Trademarked names and product designations are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is original factory‑new goods of the manufacturer. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com