GX24-2F300N03-UF4 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WSM33S grade for enhanced tool life and reliable chip control; this delivers consistent productivity in the machining of stainless steels and heat‑resistant alloys. Order directly via Metav Werkzeuge or consult the technical team for tailored tool recommendations. GX24-2F300N03-UF4 WSM33S indexable turning insert — Tiger‑tec Silver for stainless steels and superalloys (Walter Tools) The GX24-2F300N03-UF4 WSM33S is an indexable turning insert engineered for productive turning of rostfreier Stahl and heat‑resistant superalloys, offering robust edge stability and stable chip formation in demanding applications. Tiger‑tec Silver coating for high wear resistance Optimised grade WSM33S for stainless steels Stable cutting edge for heavy applications Suitable for superalloys and titanium alloys Improve cycle times with a wear‑resistant coating The combination of a Tiger‑tec Silver coating and a premium carbide grade yields a balance of wear resistance and thermal stability that directly improves cycle times in serial production. For components made from rostfreier Stahl or other difficult‑to‑machine alloys, the coating reduces flank wear and maintains the cutting edge geometry over longer tool life. This means fewer insert changes and more consistent dimensional results, which supports throughput targets and predictable maintenance scheduling. Secure chip control and stable cutting behaviour Thanks to the specified chipbreaker geometry and the WSM33S grade, the insert promotes reliable chip formation even under high temperatures associated with machining superalloys. Stable chips reduce the risk of surface damage and secondary operations, and the insert’s geometry helps evacuate swarf efficiently. This leads to a measurable reduction in finishing time and improved surface quality without sacrificing feed or depth of cut. Designed for robust industrial performance and tooling systems The insert integrates into standard tooling systems and is optimised for applications where process reliability is paramount. The WSM33S grade is formulated to withstand the mechanical and thermal demands of heat‑resistant alloys, which supports a predictable tool life and repeatable results across batches. When paired with appropriate cutting parameters, the insert contributes to consistent tolerance adherence and minimised scrap rates, supporting cost‑effective production. Contact Metav Werkzeuge today to discuss how the GX24-2F300N03-UF4 WSM33S can be integrated into existing turning processes and to receive personalised cutting data and availability information Technical data Article number: GX24-2F300N03-UF4-WSM33S-WALTER Designation: GX24-2F300N03-UF4 WSM33S Manufacturer: Walter Tools Core specifications Series: Tiger‑tec Silver Grade: WSM33S Chipbreaker: 2F300N03‑UF4 Material group: S / M Special features Coating: Tiger‑tec Silver Material suitability: rostfreier Stahl (stainless steels) Application focus: hard‑to‑machine materials and stainless steels FAQ What materials is this insert suitable for? The GX24-2F300N03-UF4 WSM33S from Walter Tools is designed for rostfreier Stahl and heat‑resistant superalloys, addressing the challenges these materials pose for chip control and edge stability. How does the Tiger‑tec Silver coating benefit production runs? The Tiger‑tec Silver coating on the WSM33S grade improves wear resistance and thermal stability, which helps maintain cutting geometry over longer runs and reduces the frequency of insert changes. Is this insert compatible with standard turning toolholders? Yes, the GX24-2F300N03-UF4 conforms to common indexable insert geometries and fits standard turning toolholders used in industrial lathes and machining centres. Can this insert reduce finishing operations? By promoting consistent chip control and a stable cutting edge, the insert can improve surface quality and reduce the need for subsequent finishing passes in many applications. Where can tailored cutting data be obtained? Cutting data and process optimisation advice are available through Metav Werkzeuge, which can recommend feeds and speeds tailored to the workpiece material and machine used. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (trade name: Walter Tools) is one of the world’s leading manufacturers of precision cutting tools for metalworking and forms part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners; brand names are used for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
GX24-2F300N15EM-1 WBS10 WBS10 Wendeplatten - Walter Tools
Optimise machining of hardened materials with the robust CBN cutting grade WBS10, reliable chip control and extended tool life; order the GX24-2F300N15EM-1 WBS10 turning insert directly via Metav Werkzeuge or consult our specialists for application guidance. GX24-2F300N15EM-1 WBS10 indexable turning insert — CBN grade for hardened steels | Walter Tools The GX24-2F300N15EM-1 WBS10 is an indexable turning insert engineered for high-wear turning operations, specifically intended for the machining of hardened steels and similarly demanding materials. CBN cutting grade WBS10 for hard materials Optimised chip formation for stable turning High wear resistance in demanding operations Compatible with precision turning toolholders Maximise tool life and stability when turning hardened steels The combination of CBN cutting material and the WBS10 grade delivers significantly improved wear resistance in operations that involve hardened steels. CBN (cubic boron nitride) is a superabrasive designed for high-temperature, high-abrasion conditions; it maintains a sharp, stable cutting edge where conventional carbides would wear rapidly. For production environments this means fewer insert changes, more consistent surface finishes and reduced unplanned downtime, contributing directly to higher overall equipment effectiveness and predictable process performance. Reliable chip formation that supports efficient production An optimised chipformer geometry and the material-specific design ensure stable chip formation and controlled chip flow under severe cutting conditions. Stable chips reduce the risk of chatter and workpiece damage, and they simplify chip handling in automated cells. The insert’s proven behaviour under continuous loads supports steady cutting parameters, allowing shops to favour productivity and reproducibility over conservative feeds or speeds. Where surface integrity and repeatability matter, this insert helps keep cycle times short while preserving component quality. Practical integration and selection guidance for workshop use The insert is intended for use in standard indexable turning toolholders; compatibility should be confirmed against the chosen holder system and clamping arrangement. Material suitability must be verified against the manufacturer’s product matrix, since performance depends on the exact workpiece material and process parameters. For setups processing hardened steels or superalloys, the WBS10 grade offers a strong starting point, and adjustments to feed, depth of cut and coolant strategy are advised to match specific applications. For less experienced teams, consultation on cutting data helps translate the insert’s technical advantages into measurable shop-floor gains. For tailored recommendations on using the Walter Tools GX24-2F300N15EM-1 WBS10 CBN insert in specific applications, contact Metav Werkzeuge for expert advice and fast processing — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: GX24-2F300N15EM-1-WBS10-WALTER Article designation: GX24-2F300N15EM-1 WBS10 Product type: Indexable turning insert Series: Walter CBN / Hartstoff Core data Grade: WBS10 Cutting material: CBN Material availability: catalogue-dependent Special features Designed for hardened steels and high-wear applications Stable chip formation and wear resistance Material suitability to be checked via product matrix Manufacturer: Walter Tools FAQ What materials is this insert best suited for? The GX24-2F300N15EM-1 WBS10 indexable turning insert by Walter Tools is optimised for hardened steels and other high-wear materials; final suitability should be checked against the product matrix. Why choose a CBN grade like WBS10 over carbide? CBN, as used in the WBS10 grade of the GX24-2F300N15EM-1 WBS10 insert, offers superior edge stability and wear resistance in hardened-material turning compared with conventional carbide inserts. Can the GX24-2F300N15EM-1 WBS10 be used in standard toolholders? The GX24-2F300N15EM-1 WBS10 insert is intended for use in compatible indexable turning toolholders; verification of clamping and seat geometry is recommended before production use. Does this insert improve surface finish when turning hardened components? When applied with appropriate cutting data, the Walter Tools GX24-2F300N15EM-1 WBS10 can deliver improved surface integrity and consistent finish due to its stable cutting edge and reliable chip control. How should material suitability be confirmed for specific workpieces? Material suitability for the GX24-2F300N15EM-1 WBS10 should be confirmed via Walter Tools’ product matrix and, if necessary, by consulting Metav Werkzeuge for tailored cutting data and recommendations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory-new goods from the manufacturer Walter Tools.
GX24-2F300N15FS-M1 WDN10 Wendeplatten - Walter Tools
High wear resistance and a controlled chip geometry make this insert suited to abrasive non‑ferrous work, extending intervals between tool changes and stabilising production. Benefit from the WDN10 PKD grade and the engineered chipbreaker for consistent surface quality — order the insert directly via Metav Werkzeuge or consult their advisers for application matching. GX24-2F300N15FS-M1 WDN10 indexable turning insert by Walter Tools — PKD grade with engineered chipbreaker GX24-2F300N15FS-M1 WDN10 serves as a high‑performance indexable turning insert for abrasive, non‑iron materials and non‑ferrous alloys PKD grade WDN10 for abrasive materials Engineered 2F300N15FS-M1 chipformer Optimised for consistent surface quality Suitable for high‑throughput operations Longer tool life when machining abrasive non‑ferrous alloys Equipped with WDN10, a polycrystalline diamond grade, the insert delivers exceptional wear resistance on abrasive non‑ferrous materials. PKD comprises diamond crystals bonded to a substrate, offering hardness and thermal stability well above conventional carbide. This translates into reduced flank wear and extended tool life, fewer tool changes and lower per‑part machining costs, which supports steadier throughput in batch and continuous production. Predictable chip control for higher productivity The integrated 2F300N15FS-M1 chipformer produces consistent chip shapes, improving chip control and enhancing the surface finish of the workpiece. Stable chip evacuation reduces the risk of recutting or surface damage and helps to maintain cutting forces within predictable limits. As a result, feed rates and cycle times can be increased where the machine and setup allow, creating a tangible uplift in effective material removal rate without compromising part quality. Reliable process integration and handling advantages As an indexable turning insert from Walter Tools, the GX24-2F300N15FS-M1 WDN10 is intended for applications where abrasion resistance and repeatable performance are decisive. Compatibility with holders and inserts should be verified against the manufacturer's product matrix to ensure correct clamping and geometry alignment. The catalogue‑dependent material specification adds flexibility across tool management strategies; when incorporated into a systematic tooling plan, the insert supports predictable maintenance intervals and improved process security. Discuss application suitability and procurement with Metav Werkzeuge — their consultants advise on integration and selection of Walter Tools inserts for specific machine and material combinations Technical Data Article number: GX24-2F300N15FS-M1-WDN10-WALTER Designation: GX24-2F300N15FS-M1 WDN10 Product type: Indexable turning insert Manufacturer: Walter Tools Facts Grade: WDN10 (PKD) Chipbreaker: 2F300N15FS-M1 Series: Walter Schneidstoffsorte - Serie offen Special features Material: catalogue‑dependent Intended application: abrasive non‑ferrous metals and other non‑iron abrasive materials Benefit focus: extended tool life, improved surface quality, predictable chip control Note: Verify workpiece‑specific suitability via product matrix FAQ What materials is this insert designed for? The WDN10 grade is a PKD formulation optimised for abrasive non‑ferrous metals and other abrasive, non‑iron materials; suitability should be checked in the product matrix for specific alloys. How does the 2F300N15FS‑M1 chipbreaker improve results? The 2F300N15FS‑M1 chipformer produces consistent chip geometry, aiding chip evacuation and reducing the likelihood of rework, which leads to steadier cutting forces and improved surface finish. Can this insert replace carbide in general turning applications? PKD inserts such as WDN10 excel on abrasive, non‑ferrous materials where carbide wears rapidly; for ferrous materials and hardened steels, consult the product matrix as PKD is generally not recommended. How should compatibility with toolholders be checked? Confirm the insert designation GX24‑2F300N15FS‑M1 WDN10 against the holder's specifications and the manufacturer's product matrix to ensure correct seating, clamping and cutting geometry. What production benefits can be expected when switching to this insert? Expect longer tool life on abrasive non‑ferrous workpieces, reduced tool change frequency and more consistent part quality, which together contribute to higher net output and lower process interruptions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is original, factory‑new goods of the manufacturer.
GX24-2F300N15TM-1 WBH20 WBH20 Wendeplatten - Walter Tools
Take advantage of a high-performance CBN grade combined with robust wear resistance and consistent results for demanding hard-turning operations; order availability and technical advice are provided via Metav Werkzeuge. GX24-2F300N15TM-1 WBH20 turning indexable insert – CBN grade for hardened steels (Walter Tools) The GX24-2F300N15TM-1 WBH20 is a precision indexable turning insert engineered for hard machining, offering high wear resistance and process stability in the machining of hardened steels. CBN grade WBH20 for hard machining Optimised for hardened steels (H) Stable wear resistance and edge stability Walter CBN / hard-material series Enhanced tool life and consistent performance for hard turning The WBH20 CBN grade is formulated for the highest demands in hard machining and provides exceptional wear resistance and edge stability under elevated cutting forces. CBN (cubic boron nitride) is a superabrasive material that retains cutting capability at high temperatures, which translates into prolonged tool life and fewer insert changes. This results in improved machine utilisation and lower process downtime when working on hardened steels and pre-hardened components. Predictable process behaviour and machining quality The insert features an optimised chip control geometry indicated by the 2F300N15TM-1 chipformer, designed to manage chips and promote stable cutting conditions in demanding applications. Stable chip formation supports repeatable surface quality and dimensional consistency, reducing rework and inspection effort. As part of the Walter CBN / hard-material series, the insert contributes to predictable cycle times and controlled tool wear, thereby enhancing overall process reliability. Practical benefits for production workflows Use of a CBN-based grade such as WBH20 offers clear advantages when machining materials in ISO group H: fewer tool changes, reliable engagement with high hardness levels and improved surface finishes compared with conventional carbide tooling. The combination of a robust grade and a dedicated chipformer leads to cost-effective hard turning through increased part output and lower secondary processing. Technical staff can expect more consistent component tolerance achievement over longer production runs. Application guidance and integration into machining processes The insert is primarily intended for the machining of hardened steels and pre-hardened steel applications and is well suited to finishing and precision hard-turning tasks where edge integrity and wear resistance are critical. Integration into an existing turning cell requires standard indexable insert holders compatible with the GX24 designation; careful fixturing and stable setup are recommended to exploit the full benefits of the CBN grade. For complex or critical applications, collaboration on cutting data with the supplier helps to adapt the insert to specific machine and workpiece conditions. For application advice, availability and supply of Walter Tools CBN inserts, contact Metav Werkzeuge for tailored technical consultation and ordering support: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: GX24-2F300N15TM-1-WBH20-WALTER Product: Drehwendeschneidplatte GX24-2F300N15TM-1 WBH20 Manufacturer: Walter Tools Facts Material group: H (hardened steels) Special features Series: Walter CBN / hard-material Grade: WBH20 (CBN) Chipformer: 2F300N15TM-1 ISO designation: GX24-2F300N15TM-1 WBH20 Suitable for: hardened steels, pre-hardened steel FAQ What materials is the GX24-2F300N15TM-1 WBH20 designed for? The GX24-2F300N15TM-1 WBH20 is designed primarily for hardened steels (ISO group H) and is suitable for pre-hardened steel workpieces, taking advantage of the CBN grade for demanding hard machining. Can this insert be used for finishing hardened components? Yes, the CBN grade WBH20 is particularly suitable for finishing and precision hard-turning where edge stability and surface quality are critical. Which product series does this insert belong to? The insert is part of the Walter CBN / hard-material series, which focuses on tools optimised for hard and highly wear‑resistant machining tasks. What is the function of the 2F300N15TM-1 designation? The 2F300N15TM-1 denotes the chipformer geometry tailored to controlled chip formation and stable cutting performance in hard‑material applications. Is the GX24 insert suitable for non-hardened materials like aluminium or cast iron? The specification for the GX24-2F300N15TM-1 WBH20 highlights suitability for hardened steels; suitability for other material groups is not indicated in the available product data. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
GX24-3E400N02-CF5 WSM23S Wendeplatten - Walter Tools
Reliable machining of heat-resistant alloys is enabled by the Tiger·tec Silver coating and the WSM23S grade, which together provide thermal resilience and a stable cutting edge; the 3E400N02-CF5 geometry ensures predictable chip formation. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. GX24-3E400N02-CF5 WSM23S indexable turning insert, Tiger·tec Silver — Walter Tools The GX24-3E400N02-CF5 WSM23S is a coated carbide indexable turning insert designed for high thermal stability and reliable chip control when machining rostfreier Stahl and heat-resistant superalloys Tiger·tec Silver coating for thermal stability WSM23S grade for hard-to-machine alloys Geometry 3E400N02-CF5 for predictable chip control Suitable for rostfreier Stahl and superalloys Built for thermal resilience and consistent edge life The combination of the Tiger·tec Silver coating and the WSM23S grade results in a coated carbide insert engineered for elevated temperature resistance and reduced flank wear. The multilayer coating reduces heat transfer into the substrate while preserving a stable cutting edge, which mitigates built-up edge and extends tool life during continuous turning operations. The designated chipbreaker, 3E400N02-CF5, provides controlled chip splitting and evacuation, lowering the risk of chip re-cutting and improving surface quality. This technical makeup translates into fewer insert changes and more predictable process windows, supporting higher productivity in serial production environments. Optimised for rostfreier Stahl and high-temperature alloys The grade targets ISO groups M and S, meaning the insert is matched to the demands of rostfreier Stahl and heat-resistant superalloys that characteristically exhibit low thermal conductivity and high strength at temperature. The substrate and coating are balanced to resist softening and chipping under thermal and mechanical stress, offering consistent performance when encountering work-hardened or adhesive-prone surfaces. For workshop planners and CNC programmers, this means a reliable option for facing, light turning and finishing passes where material adhesion and edge integrity are critical. Selection of appropriate feeds, cutting depths and coolant strategy will further exploit the grade’s strengths and reduce cycle-time variability. Productivity gains and integration advice for production Process stability is the primary economic advantage: the insert’s coating and chipbreaker reduce tooling downtime and rework, supporting a steady throughput. When integrating this insert into a turning cell, pair the insert with a rigid indexable holder and ensure correct seat clearance to preserve the defined cutting geometry. Although cutting data must be adapted to the specific machine and workpiece, the overall result is improved surface finish and longer intervals between tool changes, particularly on rostfreier Stahl and nickel-based alloys. If the application involves severe interruptions or difficult profiles, prefer conservative entry parameters and validate stability before ramping up to full production. For machining rostfreier Stahl and superalloys, request the Walter Tools GX24-3E400N02-CF5 WSM23S insert from Metav Werkzeuge — contact Metav Werkzeuge for specification advice or to place an order via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: GX24-3E400N02-CF5-WSM23S-WALTER Product type: Drehwendeschneidplatte / indexable turning insert Brand: Walter Tools Grade: WSM23S Core specifications Series: Tiger·tec Silver Chipbreaker / geometry: 3E400N02-CF5 Material designation: S / M Special features Coating: Tiger·tec Silver Substrate: coated carbide Application: rostfreier Stahl machining Application: heat-resistant superalloys machining FAQ What materials is the GX24-3E400N02-CF5 WSM23S best suited for? The GX24-3E400N02-CF5 WSM23S is designed primarily for rostfreier Stahl and heat-resistant superalloys (ISO groups M and S), where thermal resistance and stable edge integrity are required. How does the Tiger·tec Silver coating affect tool life? The Tiger·tec Silver coating reduces heat transfer and enhances wear resistance on the cutting edge, which helps the insert maintain lengthened service intervals and consistent performance in demanding turning operations. What benefit does the 3E400N02-CF5 chipbreaker provide? The 3E400N02-CF5 geometry promotes predictable chip formation and evacuation, lowering the risk of chip entanglement and improving surface finish during continuous and finishing cuts. Can this insert be used for roughing and finishing? Yes; the insert’s combination of coated carbide and chipbreaker makes it adaptable for both finishing passes and light-medium roughing, provided cutting parameters are chosen to match the workpiece and machine rigidity. Is the GX24-3E400N02-CF5 WSM23S compatible with standard indexable holders? The insert is intended for common indexable turning systems — ensure correct seating and torque to retain designed cutting geometry and to prevent premature edge degradation. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
GX24-3E400N02-CK8 WK1 Wendeplatten - Walter Tools
Take advantage of the combination of an uncoated carbide grade (WK1) and the 3E400N02-CK8 chipbreaker to secure stable chip formation and productive turning; order or request advice via Metav Werkzeuge for application-specific support. GX24-3E400N02-CK8 WK1 – Indexable turning insert, uncoated carbide, 3E400N02-CK8 chipbreaker | Walter Tools The GX24-3E400N02-CK8 WK1 is an indexable turning insert intended for general turning tasks, combining an uncoated carbide grade with a dedicated 3E400N02-CK8 chipbreaker to promote consistent chip control and machining reliability Uncoated carbide grade WK1 3E400N02-CK8 chipbreaker geometry Part of Walter open-grade carbide series Consistent chip control for reduced interruptions The integrated 3E400N02-CK8 chipbreaker is designed to produce predictable chip forms under a variety of cutting conditions, which reduces the risk of chip entanglement and machine stops. By shaping chips into short, controllable segments, the geometry lowers the need for manual chip handling and keeps cycle times steady. For production environments, this translates into fewer operator interventions and improved process repeatability while maintaining surface quality. Robust uncoated carbide grade for versatile turning The insert uses an uncoated carbide grade classified as WK1, offering a robust cutting edge suitable for many turning operations. Uncoated carbide provides direct contact between the substrate and workpiece, which can be advantageous where coating adhesion is a concern or where specific cutting strategies require an uncoated edge. The open-grade series approach gives flexibility in grade selection; the exact workpiece suitability should be verified against the manufacturer's product matrix to match cutting conditions and materials. Efficient integration into existing tooling systems The geometry and form factor allow straightforward mounting in standard toolholders for indexable turning, enabling fast insert changes and minimal setup time. The combination of a stable cutting edge and a defined chipbreaker supports both interrupted cuts and continuous turning, improving tool life consistency. For detailed cutting parameters, workpiece recommendations or to confirm compatibility with a specific holder, consult Metav Werkzeuge for tailored data and application notes. For tailored cutting data and ordering of the GX24-3E400N02-CK8 WK1 from Walter Tools, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for application advice and rapid supply. Technical data SKU: GX24-3E400N02-CK8-WK1-WALTER Designation: GX24-3E400N02-CK8 WK1 Product type: Indexable turning insert Manufacturer: Walter Tools Grade: WK1 (uncoated carbide) Chipbreaker: 3E400N02-CK8 Series: Walter Schneidstoffsorte - Serie offen Material note: Katalogabhängig Core data No dimensions or cutting parameters provided in the source data No recommended cutting speeds or feeds supplied No tolerance or geometry angles listed Special features Uncoated carbide substrate (WK1) Dedicated 3E400N02-CK8 chipbreaker geometry Open-grade series for flexible grade selection Intended for general turning applications Article identification: GX24-3E400N02-CK8-WK1-WALTER FAQ What materials is this insert suitable for? The GX24-3E400N02-CK8 WK1 is supplied in an uncoated carbide grade intended for a broad range of turning tasks; specific workpiece suitability should be checked in the Walter product matrix for the WK1 grade. Is the insert coated or uncoated? This insert is uncoated carbide (WK1), which delivers a direct carbide cutting edge without an additional surface coating. What benefit does the 3E400N02-CK8 chipbreaker provide? The 3E400N02-CK8 chipbreaker is engineered to form short, controllable chips, improving chip evacuation and reducing interruptions during turning with the Walter Tools insert. Can this insert be used for roughing and finishing operations? The GX24-3E400N02-CK8 WK1 can be applied in a variety of operations; roughing or finishing suitability depends on the specific cutting parameters and material — consult Metav Werkzeuge or the product matrix for recommended use cases. How should the insert be stored and handled to preserve performance? Store the insert in its original packaging, avoid contamination of the cutting edge and inspect seats and clamps before mounting; handling guidance for the Walter Tools indexable insert ensures repeatable seating and performance. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX24-3E400N02-UF4 WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM33S grade for secure chip formation and extended tool life when machining stainless steel and heat‑resistant superalloys; order through Metav Werkzeuge or consult our experts for application‑specific recommendations. Indexable turning insert GX24-3E400N02-UF4 WSM33S — Tiger·tec Silver for stainless steel (Walter Tools) GX24-3E400N02-UF4 WSM33S is an indexable turning insert designed for heavy‑duty and difficult‑to‑machine materials, offering thermal stability and reliable edge behaviour for precision turning applications Tiger·tec Silver coating technology WSM33S grade for tough materials Stable cutting edge for stainless steel ISO GX24 geometry with 3E400N02‑UF4 chipbreaker Proven coating technology for longer tool life The Tiger·tec Silver technology combined with the WSM33S grade offers a balanced solution between hardness and toughness that reduces flank wear and maintains a sharp cutting edge under high temperatures. For applications in stainless steel and heat‑resistant superalloys this results in improved process security and a measurable extension of tool life. Coated carbide substrates with advanced surface layers manage heat more effectively, lowering the risk of built‑up edge and helping to preserve dimensional stability throughout longer production runs. Geometry and chip control that stabilise machining The GX24-3E400N02‑UF4 geometry with the integrated chipbreaker promotes predictable chip formation and evacuation, which is crucial when machining sticky or gummy alloys. Stable chip control reduces the likelihood of rework and minimises interrupted cuts, leading to fewer tool changes and more consistent cycle times. The targeted geometry supports a stable cutting edge and improves surface finish, particularly when turning stainless steel where heat and work‑hardening can otherwise compromise results. Efficient performance for demanding material groups Engineered for material groups S and M, the insert supports turning tasks on heat‑resistant superalloys, titanium and stainless steel, delivering repeatable performance even under high thermal loading. The combination of grade and chipbreaker reduces process variability, allowing shops to increase throughput without sacrificing surface quality. This focused performance helps to lower unit costs through reduced tool consumption and steadier production output, making the insert a pragmatic choice for industrial machining environments. Application advice and process support for reliable implementation Selection of the right insert geometry, grade and cutting parameters is decisive for consistent results. The GX24-3E400N02‑UF4 WSM33S insert benefits from consultation on speeds, feeds and coolant strategies to unlock its full potential in specific setups. For tailored recommendations, optimisation of cutting data or compatibility checks with machine tool capabilities, rely on Metav Werkzeuge’s specialist advisers and application engineers to secure the best balance between productivity and component quality. For technical guidance on using Walter Tools Tiger·tec Silver inserts and to discuss the GX24‑3E400N02‑UF4 WSM33S for particular stainless steel or superalloy tasks, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for precise application support. Technical data Article number: GX24-3E400N02-UF4-WSM33S-WALTER Label: Drehwendeschneidplatte GX24-3E400N02-UF4 WSM33S Walter Tools Product type: Drehwendeschneidplatte (indexable turning insert) Series: Tiger·tec Silver Grade: WSM33S Chipbreaker: 3E400N02‑UF4 Material groups: S / M ISO designation: GX24-3E400N02-UF4 WSM33S UID: GX24-3E400N02-UF4-WSM33S-WALTER Facts Applicable materials: stainless steel, heat‑resistant superalloys, titanium Coated carbide grade classification: coated hard metal Intended application: heavy‑duty and difficult‑to‑machine materials Special features Optimised chip control for stable production Thermal stability under elevated cutting temperatures Robust cutting edge for reduced flank wear Suitable for demanding ISO material groups S and M FAQ What materials is this insert suitable for? The GX24‑3E400N02‑UF4 WSM33S insert is specified for machining stainless steel and heat‑resistant superalloys; the WSM33S grade targets applications with high thermal and mechanical loading. How does Tiger·tec Silver improve performance? Tiger·tec Silver provides a coating system that balances hardness and thermal resistance, which on the WSM33S grade leads to reduced wear and better edge stability under elevated temperatures. Which machine settings are recommended for initial trials? As a starting point, use conservative cutting speeds and moderate feed per revolution when machining stainless steel with the GX24 geometry, then adjust based on chip shape and surface finish observed for the specific alloy and setup. Can this insert improve process stability in series production? Yes; the combination of the WSM33S grade and the 3E400N02‑UF4 chipbreaker is designed to promote consistent chip formation and predictable tool life, supporting repeatable cycle times in series machining. Where to get application support or cutting data? Metav Werkzeuge offers tailored application advice and cutting data recommendations for the Walter Tools insert to ensure optimal performance in each machine and material combination. Hersteller: Walter Tools; Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (Markenauftritt: Walter Tools) gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX24-3E400N02-UF8 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the combination of high thermal stability, robust edge life and reliable chip control to maintain consistent productivity. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. Drehwendeschneidplatte GX24-3E400N02-UF8 WSM23S — Turning insert with Tiger·tec Silver coating (Walter Tools) A Drehwendeschneidplatte GX24-3E400N02-UF8 WSM23S designed for heavy-duty turning of difficult-to-machine alloys and rostfreier Stahl, providing stable cutting edges and consistent chip formation Tiger·tec Silver coating for thermal stability WSM23S grade for heavy-duty machining Chipbreaker 3E400N02-UF8 for reliable chip control Designed for rostfreier Stahl and superalloys Higher productivity through thermal and edge stability The combination of the Tiger·tec Silver technology and the WSM23S coated carbide grade delivers measurable advantages when turning demanding materials. The coating improves heat resistance and reduces flank wear, which means the insert maintains a cutting edge for longer periods and supports steady cycle times. In practice this results in fewer tool changes and lower machine downtime, contributing to a better cost-per-part ratio while retaining surface quality. Predictable chip control for safer processes The integrated chipbreaker 3E400N02-UF8 geometry promotes reproducible chip formation under high thermal and mechanical loads. Controlled chip evacuation reduces the risk of wire-like or tangled chips in continuous turning operations and helps to protect both the tool and the workpiece. For production environments that require process reliability, this turning insert delivers consistent chip behaviour and supports safer, more efficient machining routines. Versatility for rostfreier Stahl and heat-resistant alloys Specified for ISO groups M and S, the insert is optimised for rostfreier Stahl and heat-resistant superalloys including titanium-based materials. The substrate and coating combination is tailored to handle the tendency of these metals to work-harden or generate elevated cutting temperatures. As a result, the insert is suitable for tough turning tasks where stable chip formation and edge robustness are essential for repeatable quality. Practical use and integration in production workflows Geometry GX24-3E400N02-UF8 and the WSM23S grade provide a balance between toughness and wear resistance, enabling effective application across diverse part families. The insert is compatible with standard indexable turning toolholders designed for this geometry, simplifying replacement and stock management. With predictable life and repeatable performance, the component supports lean inventory planning and improves overall throughput in batch and continuous production. For machining rostfreier Stahl and superalloys with reliable edge life, contact Metav Werkzeuge to discuss Walter Tools Tiger·tec Silver inserts or request an application consultation at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: GX24-3E400N02-UF8-WSM23S-WALTER Product type: Turning insert (Drehwendeschneidplatte) Designation: GX24-3E400N02-UF8 WSM23S Manufacturer: Walter Tools Grade / Sort: WSM23S Facts Series: Tiger·tec Silver Chipbreaker / Geometry: 3E400N02-UF8 Material group applicability: M, S Material base: coated carbide Special features Optimised for rostfreier Stahl and heat-resistant superalloys Stable cutting edge and thermal resistance Designed for reliable chip control Suitable for heavy-duty turning applications FAQ What materials is this insert intended for? The insert is suitable for rostfreier Stahl and heat-resistant superalloys (ISO groups M and S); the WSM23S grade supports heavy-duty turning of such materials. How does the 3E400N02-UF8 chipbreaker improve production? The chipbreaker 3E400N02-UF8 encourages consistent chip formation under high loads, reducing interruptions from erratic chips and contributing to safer, more efficient turning operations. Is the insert compatible with standard turning toolholders? Yes. The GX24 geometry and designation enable integration with toolholders that accept GX24-style indexable inserts, facilitating straightforward replacement and tool management. What performance benefit does Tiger·tec Silver provide? Tiger·tec Silver coating enhances thermal stability and wear resistance, extending edge life and enabling steadier machining results on demanding alloys. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Mark names and registered trademarks are used here exclusively for explanation and identification purposes. There is no connection between our company and the mentioned brands. The item offered is an original, factory-new product of the manufacturer.
GX24-3E400N03-CE4 WKP23S WKP23S Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating with the WKP23S grade provides extended tool life and reliable cutting performance for steel and cast iron machining; order the insert directly via Metav Werkzeuge or contact the consultants for tailored advice. GX24-3E400N03-CE4 WKP23S indexable turning insert — Walter Tools, Tiger·tec Silver coating for steel and cast iron GX24-3E400N03-CE4 WKP23S is an indexable turning insert designed for stable, productive machining of steel and cast iron in general turning applications Tiger·tec Silver coating for extended tool life Optimised chipbreaker 3E400N03-CE4 for stable cutting Suitable for steel and cast iron machining Longer tool life and stable cutting for higher productivity The combination of the Tiger·tec Silver coating and the WKP23S grade gives a measurable improvement in wear resistance and process stability. The coated carbide substrate is engineered to withstand the thermal and mechanical loads typical when machining P‑class materials, which results in less frequent tool changes and longer uninterrupted production runs. Fewer interruptions translate directly into higher effective productivity and lower unit machining costs. Predictable chip control and improved surface quality The insert’s 3E400N03-CE4 chipbreaker geometry is optimised to create short, controllable chips when working across a range of feeds and depths of cut. This enhances chip control and reduces the risk of surface damage or built-up edge, helping to maintain a consistent surface finish on turned components. The geometry also aids coolant penetration and heat dissipation, supporting repeatable results in serial production. Broad material coverage: steel and cast iron applications Prepared for ISO groups P and K, this grade is tailored to the differing demands of steel and cast iron machining. For steels, the coating and substrate combination manages the heat and plastic deformation common during cutting; for cast iron, the formulation resists abrasive wear from ferritic and nodular structures. The result is a versatile insert that simplifies tooling portfolios by covering multiple workpiece materials with one solution. Operational benefits and integration into tooling systems Designed for compatibility with standard turning toolholders, the insert supports rapid fitment and predictable regrinding or replacement cycles. Process planners benefit from the WKP23S grade’s consistent edge behaviour, which reduces variability between tool batches and improves process capability. In high-volume environments this leads to more stable cycle times and easier planning of maintenance windows. Contact Metav Werkzeuge today to discuss Walter Tools Tiger·tec Silver inserts and to identify the correct WKP23S insert for specific steel or cast iron turning tasks Technical Data SKU: GX24-3E400N03-CE4-WKP23S-WALTER ISO designation: GX24-3E400N03-CE4 WKP23S Series: Tiger·tec Silver Grade: WKP23S Chipbreaker: 3E400N03-CE4 Application: P (steel), K (cast iron) Core data Article ID/UID: GX24-3E400N03-CE4-WKP23S-WALTER Product type: Indexable turning insert Material class: Coated carbide (coated hardmetal) Special features Coating technology: Tiger·tec Silver Optimised for stable chip formation Broad material coverage: steel and cast iron Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The GX24-3E400N03-CE4 WKP23S insert is specified for ISO groups P and K, making it suitable for steel and cast iron machining applications. What does the WKP23S grade provide compared with standard grades? The WKP23S grade combines a coated carbide substrate and the Tiger·tec Silver coating to enhance wear resistance and maintain cutting-edge stability across varying process conditions. How does the 3E400N03-CE4 chipbreaker affect production? The 3E400N03-CE4 chipbreaker promotes short, controlled chips and supports reliable coolant flow, which helps to secure consistent surface finish and minimise rework. Is this insert compatible with common turning toolholders? The insert geometry and ISO designation match standard turning toolholder interfaces, enabling straightforward integration into existing tooling systems. Can the insert reduce the number of tool variants needed in a shop? Thanks to its broad applicability for steel and cast iron, the insert can reduce the tooling variety required for mixed‑material production, simplifying inventory and tool management. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands; the offered item is an original, factory‑new product of the manufacturer, Walter Tools.
GX24-3E400N03-CE4 WSM23S WSM23S Wendeplatten - Walter Tools
Benefit from the Tiger·tec Silver coating and the WSM23S grade that deliver stable cutting edges and reliable chip control via the 3E400N03-CE4 chipbreaker; combine these strengths for consistent productivity when machining stainless steels and heat‑resistant alloys. Order directly via Metav Werkzeuge or request guidance from the consultants for application advice. Drehwendeschneidplatte GX24-3E400N03-CE4 WSM23S – Indexable turning insert for stainless steels and superalloys (Walter Tools) The GX24-3E400N03-CE4 WSM23S is a coated carbide turning insert from the Tiger·tec Silver range, engineered for demanding machining of stainless steels, heat‑resistant superalloys and titanium applications. Tiger·tec Silver coated carbide grade WSM23S Optimised for stainless steels and superalloys Stable cutting edge with secure chip control High process security for demanding turning Consistent edge stability for demanding materials The combination of the Tiger·tec Silver coating and the WSM23S coated carbide grade provides enhanced resistance to heat and flank wear, which directly benefits turning operations in materials that tend to soften or weld to the cutting edge. This material pairing supports a stable cutting edge and reduces the risk of built‑up edge formation, so cycle times remain predictable and surface quality is maintained. The result is fewer tool changes and improved process reliability in continuous production runs. Controlled chips to reduce interruptions The integrated chipbreaker 3E400N03-CE4 is designed to produce predictable chip shapes and safe evacuation during turning, which lowers the likelihood of chip entanglement and downstream stoppages. Better chip control shortens non‑productive time and helps maintain cutting conditions for longer, increasing overall workshop throughput. For shops aiming to keep machines running and minimise manual intervention, this chipbreaking geometry contributes to smoother machining sequences. Broad material capability for versatile use Rated for ISO groups M and S, the insert is suitable for stainless steels as well as heat‑resistant superalloys and titanium, materials that typically challenge cutting edges with high temperatures and poor thermal conductivity. The grade and geometry address common issues such as heavy tool loading and unstable chip formation by promoting a reliable chip flow and preserving the tool edge. This versatility makes the insert a practical choice for mixed‑material production environments where flexibility and repeatable results are required. Predictable tool life and process security Manufactured by Walter Tools within the Tiger·tec Silver series, the insert emphasises consistent performance and process security in high‑demand turning applications. Stable edge behaviour and controlled chip formation translate into measurable improvements: fewer rejects, steadier dimensional accuracy and a more economical tool usage pattern over the life of the insert. For engineering teams focused on reproducible component quality, the combination of coating, grade and chipbreaker delivers tangible operational benefits. Discuss specific machining cases with Metav Werkzeuge — request application advice for the Tiger·tec Silver WSM23S insert from Walter Tools via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: GX24-3E400N03-CE4-WSM23S-WALTER Name: Drehwendeschneidplatte GX24-3E400N03-CE4 WSM23S Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM23S Facts Applicable ISO groups: M, S Chipbreaker: 3E400N03-CE4 Material designation: S / M Product type: Drehwendeschneidplatte Special features Coated carbide grade optimised for heat resistance Designed for secure chip control and stable cutting edges Suitable for stainless steels and heat‑resistant alloys Part of the Tiger·tec Silver family for consistent performance FAQ What materials can this insert machine effectively? The GX24-3E400N03-CE4 WSM23S insert from Walter Tools is designed for stainless steels and heat‑resistant superalloys (ISO groups M and S), with suitability for titanium depending on geometry. How does the 3E400N03-CE4 chipbreaker improve productivity? The 3E400N03-CE4 chipbreaker promotes predictable chip shapes and evacuation, reducing stoppages and enabling longer uninterrupted cutting periods with the Walter Tools turning insert. Is the WSM23S grade suited for high‑temperature cutting? Yes, the WSM23S coated carbide grade in the Tiger·tec Silver series is engineered for thermal resistance and a stable cutting edge in high‑temperature applications. Will this insert provide a consistent surface finish in stainless steel turning? The combination of the Tiger·tec Silver coating and the WSM23S grade supports stable cutting behaviour, which helps to achieve repeatable surface quality in stainless steel turning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, brand‑new product of the manufacturer (Walter Tools).
GX24-3E400N04-GD3 WKP23S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver wear resistance and the WKP23S grade for stable cutting performance and consistent chip control; this ensures productive turning of steel and cast iron. Order the insert directly via Metav Werkzeuge or consult the specialists for application advice. GX24-3E400N04-GD3 WKP23S indexable turning insert, Tiger‑tec Silver – Walter Tools A GX24-3E400N04-GD3 WKP23S indexable turning insert engineered for high-productivity turning of steel and cast iron in industrial machining. Tiger‑tec Silver coating for improved wear resistance WKP23S grade for robust edge life Optimised chip control geometry High productivity for steel and cast iron Longer tool life through advanced coating technology The combination of the Tiger‑tec Silver coating and the WKP23S cutting grade provides notably improved resistance to abrasive and adhesive wear, which translates into longer tool life and fewer insert changes during production. The coated carbide substrate is designed to endure the thermal and mechanical stresses typical of turning operations on P and K materials. For production environments aiming to reduce downtime, these properties support more consistent cycle times and predictable maintenance intervals. Consistent chip formation for safer machining The 3E400N04-GD3 chipbreaker geometry is optimised to promote short, controlled chips when machining steel and cast iron, lowering the risk of workpiece damage and improving operator safety. Controlled chip evacuation reduces the chance of entanglement and minimises vibration, which in turn helps to maintain a stable cutting edge and better surface finish on the workpiece. For users with varying feed and speed conditions, the geometry delivers reliable chip behaviour across typical turning parameters. Productivity gains with application-focused design Designed specifically for turning tasks in P (steel) and K (cast iron) ISO groups, this indexable insert prioritises efficiency and repeatability. The cutting grade and geometry enable productive material removal rates while preserving the integrity of the insert edge under intermittent and continuous cutting conditions. In practice, workshops will see improved part quality and reduced scrap rates as a result of the predictable performance delivered by this insert. Practical considerations for selection and use When selecting an insert for a specific turning task, consider the workpiece material and the desired surface finish; the Tiger‑tec Silver technology is best suited for demanding applications involving abrasive or adhesive wear. Insert life can be further extended by matching cutting parameters and tooling setup to the insert’s intended use—moderate depths of cut and optimised feeds typically yield the best balance between productivity and longevity. For applications close to tolerance limits, the combination of the insert’s coating and chip control helps achieve consistent dimensional results. Contact Metav Werkzeuge for application advice and to request the Walter Tools Tiger‑tec Silver insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: GX24-3E400N04-GD3-WKP23S-WALTER Product: indexable turning insert Designation: GX24-3E400N04-GD3 WKP23S Grade: WKP23S Series: Tiger‑tec Silver Facts Suitability: Steel (P) and Cast iron (K) Chipbreaker: 3E400N04-GD3 Substrate type: coated carbide Product type: Drehwendeschneidplatte / indexable insert Special features High wear resistance coating Stable chip control geometry Designed for productive turning Manufacturer: Walter Tools FAQ What materials is the GX24-3E400N04-GD3 WKP23S suitable for? The GX24-3E400N04-GD3 WKP23S insert is specified for machining steel (ISO group P) and cast iron (ISO group K), reflecting the intended use of the WKP23S grade and the Tiger‑tec Silver coating. How does the Tiger‑tec Silver coating benefit machining? The Tiger‑tec Silver coating on this Walter Tools insert reduces abrasive and adhesive wear, which improves insert life and helps maintain consistent cutting performance under industrial turning conditions. What does the chipbreaker code 3E400N04-GD3 indicate? The chipbreaker identifier 3E400N04-GD3 denotes the geometry designed for controlled, short-chip formation and secure chip evacuation when turning both steel and cast iron. Can this insert be used for stainless steel? Stainless steel suitability is not specified for the GX24-3E400N04-GD3 WKP23S; selection should favour materials listed (steel and cast iron) or consult Metav Werkzeuge for guidance on alternative grades. Is the GX24-3E400N04-GD3 WKP23S a coated carbide insert? Yes, the WKP23S grade denotes a coated carbide cutting material, utilising Tiger‑tec Silver technology for enhanced wear resistance and cutting performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX24-3E400N04-GD3 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of the WSM33S grade and the Tiger‑tec Silver coating to improve edge life and secure chip formation when machining high‑temperature alloys and stainless steels; order directly via Metav Werkzeuge or request tailored advice from our consultants to match the insert to the process. GX24-3E400N04-GD3 WSM33S indexable turning insert — Tiger‑tec Silver coated, for stainless and superalloys (Walter Tools) The GX24-3E400N04-GD3 WSM33S is a Tiger‑tec Silver coated indexable turning insert designed for high‑temperature machining of stainless steels and heat‑resistant superalloys, offering stable cutting edges and controlled chip formation. Tiger·tec Silver coating for heat resistance WSM33S grade optimised for edge stability Geometry 3E400N04‑GD3 for consistent chip control Extended tool life through thermal‑resistant coating The combination of a Tiger‑tec Silver surface treatment and a high‑quality coated carbide substrate reduces flank wear and preserves cutting edge geometry under heavy thermal load. For materials that are difficult to machine, such as stainless steels and nickel‑based alloys, the coating improves thermal resistance and lowers tendency to build up on the cutting edge. This results in reduced downtime and fewer insert changes, which directly supports higher throughput and lower total tooling cost. Consistent chip control and machining stability The insert’s geometry with the 3E400N04‑GD3 chipbreaker is engineered to promote predictable chip formation and evacuation when cutting ductile or work‑hardening materials. Stable chip control keeps process parameters steady, which supports repeatable part quality and reduces secondary operations. The WSM33S grade contributes to this behaviour by maintaining a reliable cutting edge under cyclic thermal stress, improving dimensional consistency over extended tool life. Productivity gains for demanding applications Optimised for M and S material groups, the insert balances toughness and wear resistance to meet the demands of aerospace, power‑generation and medical component machining. When combined with the correct speeds and feeds, the insert enables higher metal removal rates and a more efficient production flow. The result is measurable productivity improvement: fewer tool interventions, more consistent surface finish and a stable production rhythm. Practical selection and integration advice Selection of the correct insert grade and chipbreaker depends on workpiece material, part geometry and machining strategy. The WSM33S grade is particularly suited where thermal resistance and edge stability are priorities. For toolholders and clamping systems, choose parameters that preserve the insert seat and avoid excessive vibration; proper clamping contributes as much to performance as the insert geometry itself. For complex applications, reference cutting data from Walter Tools and consider trial cuts to validate the process window. Contact Metav Werkzeuge for a process match and availability of Walter Tools GX24-3E400N04‑GD3 WSM33S indexable inserts and receive application‑specific recommendations from our technical team. Technical data Article number: GX24-3E400N04-GD3-WSM33S-WALTER Product name: GX24-3E400N04-GD3 WSM33S Product type: Drehwendeschneidplatte Facts Grade / sort: WSM33S Series: Tiger‑tec Silver Chipbreaker: 3E400N04-GD3 Special features Coating: Tiger‑tec Silver Material base: coated carbide Suitable for: stainless Stähle (M), heat‑resistant superalloys (S) Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The insert is suitable for stainless Stähle (ISO group M) and heat‑resistant superalloys (ISO group S); the WSM33S grade is tuned for thermal resistance and edge stability in these materials. How does the Tiger‑tec Silver coating benefit machining? The Tiger‑tec Silver coating offers improved thermal resistance and wear properties, which helps to maintain edge stability and consistent chip formation in high‑temperature cutting conditions. What is the role of the 3E400N04‑GD3 chipbreaker? The 3E400N04‑GD3 chipbreaker promotes predictable chip segmentation and evacuation, reducing risk of entanglement and supporting consistent surface quality during interrupted or continuous cuts. Can this insert be used for roughing and finishing? Depending on toolholder setup and cutting parameters, the WSM33S grade can be applied for both higher‑load roughing cuts and lighter finishing passes where edge integrity is required. Is the insert compatible with standard indexable turning toolholders? The insert is an indexable turning insert and is designed to fit matching toolholder seats for this GX‑style geometry; selection of the correct seat and clamping torque is essential for performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX24-3E400N04-GD3 WSM43S WSM43S Wendeplatten - Walter Tools
Benefit from the Tiger·tec Silver coating and the WSM43S grade for stable chip formation and extended tool life; the optimised 3E400N04-GD3 geometry further improves chip control during heavy machining, so order the GX24-3E400N04-GD3 WSM43S directly via Metav Werkzeuge or request technical advice from our consultants. GX24-3E400N04-GD3 WSM43S — Turning indexable insert (Tiger·tec Silver) by Walter Tools The GX24-3E400N04-GD3 WSM43S is a coated carbide turning indexable insert designed for machining rostfreier Stahl and heat-resistant superalloys in demanding industrial applications. Tiger·tec Silver coating for heat resistance WSM43S grade for tough materials Geometry 3E400N04-GD3 for stable chip control Ideal for rostfreier Stahl and superalloys Consistent performance on demanding alloys The combination of the Tiger·tec Silver coating and the WSM43S coated carbide grade provides a resilient cutting system tailored for machining rostfreier Stahl and high-temperature alloys. The coating technology reduces thermal load at the cutting edge and supports stable chip formation, which lowers the risk of built-up edge and preserves the cutter profile over longer cycles. As a consequence, the insert maintains a more predictable wear pattern and contributes to steady cycle times in series production. Geometry engineered for reliable chip control The 3E400N04-GD3 chipbreaker geometry has been developed to channel chips away from the cutting zone and to moderate cutting forces during interrupted cuts. This geometry supports consistent chip evacuation, reducing rework and improving process repeatability. For operations that alternate between heavy cuts and finishing passes, the controlled chip behaviour helps to secure a uniform cutting action and a better surface finish on the workpiece, especially when working with materials that tend to form long, stringy chips. Longer tool life and reduced downtime Thanks to the coated carbide substrate and advanced coating process, the insert achieves improved edge stability and wear resistance. The WSM43S grade is formulated for applications where heat resistance and edge retention are essential, which translates into fewer insert changes and lower handling time. Integrating this insert into an established turning setup supports higher overall equipment effectiveness through extended intervals between indexings. Seamless integration into production workflows The insert is compatible with standard turning tool holders that accept the GX24-series form factor and can be deployed across a range of industrial turning tasks. By selecting a graded insert from a reputed manufacturer such as Walter Tools, production engineers can expect consistent dimensional control and reproducible results across batches. The use of this insert for machining rostfreier Stahl and superalloys helps to balance material removal rates with component quality, resulting in an efficient and reliable machining process. For a process-stable solution from Walter Tools, contact Metav Werkzeuge to discuss application matching or to place an order — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: GX24-3E400N04-GD3-WSM43S-WALTER Product: Turning indexable insert Brand: Walter Tools Series: Tiger·tec Silver Grade: WSM43S Geometry: 3E400N04-GD3 Material groups: S / M Core Data ISO groups: S, M Suitable for: rostfreier Stahl Special features Coating: Tiger·tec Silver Coated carbide grade WSM43S Optimised chipbreaker for stable chip formation Designed for heavy-duty and heat-resistant materials FAQ Is this insert suitable for machining rostfreier Stahl? Yes. The GX24-3E400N04-GD3 WSM43S is specified for ISO group M and is designed to handle rostfreier Stahl with improved chip control and edge stability. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating increases thermal resistance at the cutting edge, supports wear resistance and contributes to longer tool life when cutting high-temperature alloys and rostfreier Stahl. Which chipbreaker is integrated in this insert? The insert features the 3E400N04-GD3 chipbreaker geometry, engineered for reliable chip evacuation and moderated cutting forces in turning operations. Can this insert be recommended for superalloys and titanium alloys? Yes. The WSM43S grade is intended for ISO group S applications, making it suitable for heat-resistant superalloys; final suitability depends on the specific workpiece alloy and cutting parameters. What distinguishes the WSM43S grade from general-purpose grades? WSM43S is a coated carbide grade optimised for thermal stability and edge retention, offering consistent performance on materials that generate high cutting temperatures. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are used for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, factory-new goods from the manufacturer.
GX24-3E400N04-GD6 WSM23S WSM23S Wendeplatten - Walter Tools
The combination of a Tiger·tec Silver coating and the WSM23S carbide grade delivers dependable performance when machining stainless steels and heat-resistant superalloys; the result is stable cutting-edge life and consistent chip control, increasing productivity and process reliability. Order the insert directly via Metav Werkzeuge or contact the consultants for material-specific recommendations. GX24-3E400N04-GD6 WSM23S — Indexable turning insert with Tiger·tec Silver coating by Walter Tools The GX24-3E400N04-GD6 WSM23S is an indexable turning insert engineered for heavy-duty turning of stainless steels and heat-resistant superalloys, offering robust edge stability and optimised chip control. Tiger·tec Silver coated carbide grade WSM23S Optimised for stainless steels and superalloys Stable cutting edge for secure chip formation Chipbreaker 3E400N04-GD6 for controlled chips High-performance machining for demanding materials The Tiger·tec Silver coating combined with the WSM23S grade provides a coated carbide solution developed for materials that generate heat and tend to work harden, such as stainless steels and nickel-based alloys. This configuration reduces flank wear and supports longer tool life under elevated cutting temperatures. The immediate benefit is predictable cycle times and reduced tool change frequency, which contributes directly to improved throughput on production turning operations. Reliable chip control and surface quality The dedicated chipbreaker geometry (3E400N04-GD6) delivers controlled chip formation, reducing the risk of built-up edge and erratic chip behaviour during interrupted cuts. For the workshop, this means fewer secondary operations and a more consistent surface finish on each component. The controlled chips also ease parts handling and post-process cleaning, supporting leaner workflows and safer machine interaction. Edge stability under thermal and mechanical load Designed to withstand high thermal loads, this insert focuses on stable cutting edge retention and reduced notch wear in aggressive turning applications. The coated carbide construction mitigates adhesive wear and maintains edge integrity during prolonged engagement with hard-to-machine alloys. The technical effect is lower process variability and improved repeatability part-to-part—benefits that are measurable in reduced scrap rates and better first-pass yield. Integration into production and technical support Selection of the correct insert geometry and grade is crucial for maximising life and economy in series production. The insert is compatible with common indexable toolholders and can be matched to cutting parameters for finishing or roughing tasks. For complex component materials or specialised turning operations, technical advice is available to tailor cutting data, ensuring the grade and chipbreaker are used to their full potential and the machining process remains efficient. For precision turning of stainless steels and heat-resistant alloys, choose the Walter Tools Tiger·tec Silver grade and consult Metav Werkzeuge for availability, cutting-parameter support and application guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: GX24-3E400N04-GD6-WSM23S-WALTER Designation: GX24-3E400N04-GD6 WSM23S Type: Indexable turning insert (Drehwendeschneidplatte) Series: Tiger·tec Silver Core data Grade: WSM23S Material suitability: S / M Chipbreaker: 3E400N04-GD6 Applicable materials: stainless steels (M); heat-resistant superalloys and titanium (S) Special features Coated carbide grade (Tiger·tec Silver) Optimised for secure chip formation and edge stability Suited for heavy-duty machining and elevated temperatures Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The GX24-3E400N04-GD6 WSM23S insert is designed for stainless steels (M) and for heat-resistant superalloys and titanium (S), offering tailored wear resistance and edge stability. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating enhances heat resistance and reduces adhesive wear, which helps the insert maintain a stable cutting edge and longer service life under demanding turning conditions. Which chipbreaker should be selected for reliable chip control? The integrated 3E400N04-GD6 chipbreaker is engineered for controlled chip formation in interrupted and continuous cuts, minimising built-up edge and improving surface quality. Is this insert compatible with standard toolholders? Yes, the geometry and dimensions follow common indexable insert standards and are suitable for compatible turning toolholders used in industrial turning applications. Can the insert be used for finishing and roughing? Depending on insert geometry and cutting parameters, the grade supports both roughing and finishing operations; adjusting feeds and speeds will optimise performance for each task. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Walter Tools is mentioned for identification and technical clarity. There is no affiliation between Metav Werkzeuge and the named brands; the offered article is an original, factory-new product of the manufacturer.
GX24-3E400N04-GD6 WSM33S Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating with the WSM33S grade and a robust chipformer, this turning insert delivers consistent cutting performance and extended wear resistance for turning rostfreier Stahl and heat‑resistant superalloys. Order the GX24-3E400N04-GD6 WSM33S directly via Metav Werkzeuge or consult the technical team for application guidance. GX24-3E400N04-GD6 WSM33S Drehwendeschneidplatte – Tiger·tec Silver coated carbide, for rostfreier Stahl and superalloys (Walter Tools) GX24-3E400N04-GD6 WSM33S is a coated carbide turning insert from the Tiger·tec Silver series, optimised for secure chip formation in rostfreier Stahl and demanding high-temperature alloys. Tiger·tec Silver coated carbide technology Optimised for rostfreier Stahl and superalloys Stable cutting edge with secure chip formation High wear resistance for extended tool life Reliable machining of demanding materials The Tiger·tec Silver design provides a combination of thermal resilience and mechanical strength, enabling steady cutting in materials that tend to work‑harden or generate high cutting temperatures. With the WSM33S grade, the insert supports controlled chip formation and a stable cutting edge, which reduces unexpected tool changes and contributes to a predictable production flow. This benefit is particularly relevant when machining rostfreier Stahl or heat‑resistant superalloys, where process stability has a direct impact on productivity. Coating and grade explained for better tool selection Tiger·tec Silver is a multilayer coating system applied to a high‑quality carbide substrate; it combines wear resistance with improved heat management. The WSM33S grade denotes a coated cemented carbide formulation tuned for toughness and thermal endurance. Together, these characteristics mean the insert resists edge degradation when facing high friction and elevated temperatures, translating into longer intervals between tool changes and consistent component quality. Operational benefits that affect the bottom line Using an insert with a robust chipbreaker and a stable cutting edge reduces rework and improves surface finish consistency, which supports leaner workflows. The controlled chip evacuation lowers the risk of built‑up edge and part damage, while the extended tool life reduces tooling costs per part. For production environments, this results in higher uptime and more reliable cycle times when turning rostfreier Stahl or similarly challenging alloys. Compatibility and handling in workshop environments The GX24‑3E400N04‑GD6 geometry matches standard clamping systems for indexable turning, allowing straightforward integration into existing toolholders. The insert’s designation reflects its chipbreaker and geometry family, aiding rapid identification during tool preparation. Documentation and labelling with the full ISO designation simplify inventory control and support traceability across batches, which is advantageous in quality‑controlled manufacturing settings. For demanding turning tasks in rostfreier Stahl and superalloys, contact Metav Werkzeuge for tailored application advice or to arrange supply; eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data Article number: GX24-3E400N04-GD6-WSM33S-WALTER Product: Drehwendeschneidplatte Designation: GX24-3E400N04-GD6 WSM33S Manufacturer: Walter Tools Core data Series: Tiger·tec Silver Grade: WSM33S Material codes: S / M Chipbreaker: 3E400N04-GD6 Special features Coating: Tiger·tec Silver Substrate: coated cemented carbide Applications: rostfreier Stahl (M); heat‑resistant superalloys and titanium (S) Benefits: stable cutting edge, secure chip formation, extended wear resistance FAQ Which materials is the GX24-3E400N04-GD6 WSM33S suited for? The GX24-3E400N04-GD6 WSM33S insert is specified for rostfreier Stahl and for heat‑resistant superalloys and titanium, aligning with its S / M material codes. What does the WSM33S grade indicate? WSM33S denotes a Walter Tools coated cemented carbide grade within the Tiger·tec Silver family, formulated for improved heat resistance and edge stability in demanding turning operations. How does the Tiger·tec Silver coating benefit tool life? The Tiger·tec Silver coating improves thermal management and wear resistance, so the insert maintains cutting performance for longer periods under elevated temperatures compared with uncoated or conventional grades. Is the chipbreaker suitable for automated turning cells? The 3E400N04‑GD6 chipformer provides controlled chip formation and evacuation, supporting reliable operation in automated or lights‑out machining environments when combined with appropriate process parameters. How should the insert be identified for inventory and ordering? Use the full ISO designation GX24‑3E400N04‑GD6 WSM33S together with the manufacturer Walter Tools and the SKU GX24-3E400N04-GD6-WSM33S-WALTER to ensure correct procurement and stock handling. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between Metav Werkzeuge and the listed brands. The offered item is an original factory‑new product of the manufacturer Walter Tools.
GX24-3E400N04-UA4 WKP13S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating and the WKP13S grade for productive turning of steel and cast iron; enhanced edge stability and controlled chip formation deliver consistent machining results. Order directly via Metav Werkzeuge or consult the company's advisors for specific application support. Indexable turning insert GX24-3E400N04-UA4 WKP13S – Tiger·tec Silver for steel and cast iron, Walter Tools GX24-3E400N04-UA4 WKP13S is an indexable turning insert from Walter Tools, engineered with Tiger·tec Silver coating to ensure high wear resistance and reliable cutting performance in steel and cast iron turning operations. Tiger·tec Silver coated carbide grade WKP13S Optimised for steel and cast iron machining Stable cutting edge and controlled chip formation Suitable for high-productivity turning High productivity and extended tool life through advanced coating The Tiger·tec Silver coating combined with the WKP13S carbide gives a measurable boost to tool life and consistent performance under industrial conditions. The layered coating reduces abrasive wear and thermal load on the cutting edge, which translates into fewer tool changes and higher spindle utilisation. For series production and batch runs, this results in reduced downtime and a more predictable production rhythm while keeping surface finish quality stable. Reliable chip control for efficient machining cycles The chipbreaker code 3E400N04-UA4 is designed to regulate chip geometry and evacuation when machining both continuous and breaking chips. Controlled chip formation minimises workpiece rework and reduces the risk of tool or machine interruption. The built-in chip control behaviour complements the coated carbide substrate to maintain a consistent cutting zone, improving process repeatability and reducing the need for secondary operations. Broad material coverage with ISO P and K suitability Designed for the ISO material groups P (steel) and K (cast iron), the insert supports a wide range of turning tasks from general steel components to abrasive cast iron parts. The grade’s composition and the Tiger·tec Silver technology balance toughness and hardness to cope with the typical heat generation and wear mechanisms in these material groups. This versatility simplifies tool selection and helps standardise inserts across multiple applications. Process security and economical performance for production shops Stable cutting edges and the optimised coating-to-substrate pairing ensure predictable tool behaviour under varying cutting parameters. That reliability fosters higher machine throughput and lower scrap rates, which together contribute to a favourable cost-per-part metric. Backed by Walter Tools’ engineering, the insert is suited to companies aiming for reproducible results and a reduction in tooling-related process variability. For tailored machining advice on the Walter Tools Tiger·tec Silver indexable insert and availability, contact Metav Werkzeuge for application recommendations and delivery details Technical data Article number: GX24-3E400N04-UA4-WKP13S-WALTER Designation: GX24-3E400N04-UA4 ISO designation: GX24-3E400N04-UA4 WKP13S Grade / Sort: WKP13S Series: Tiger-tec Silver Chipbreaker: 3E400N04-UA4 Material designation: P / K Product type: Indexable turning insert Manufacturer: Walter Tools Facts ISO material groups: P (steel), K (cast iron) Material of grade: coated carbide Suitable for high-productivity turning Special features Tiger·tec Silver coating technology Stable cutting edge and wear resistance Controlled chip formation Walter Tools brand FAQ What materials can this insert machine effectively? The GX24-3E400N04-UA4 WKP13S insert is optimised for ISO P and K materials, meaning it is suitable for a wide range of steels and cast irons. How does the Tiger·tec Silver coating improve performance? Tiger·tec Silver reduces abrasive and thermal wear on the WKP13S coated carbide, extending tool life and maintaining a stable cutting edge during demanding turning operations. Is this insert suitable for high-speed turning applications? Yes, the combination of the coated grade and the chipbreaker design supports productive turning cycles and controlled chip evacuation at elevated cutting speeds. Which chipbreaker should be specified for reliable chip control? The 3E400N04-UA4 chipbreaker is matched to this insert and is engineered to produce consistent chip shapes for both continuous and breaking-chip behaviours in P and K materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
GX24-3E400N04-UA4 WKP33S Wendeplatten - Walter Tools
Take advantage of the combination of consistent edge life, optimised chip control and wide material coverage for a reliable turning process; order the inserts through Metav Werkzeuge or contact our consultants for application advice. GX24-3E400N04-UA4 WKP33S indexable turning insert — Tiger·tec Silver coating, for Stahl & Gusseisen | Walter Tools GX24-3E400N04-UA4 WKP33S is a coated indexable insert engineered for robust turning of Stahl and Gusseisen in industrial machining environments Tiger·tec Silver coating technology WKP33S grade for coated carbide Chipbreaker 3E400N04-UA4 for consistent chips Designed for Stahl and Gusseisen machining Increase process reliability with targeted chip control The insert delivers predictable chip formation thanks to the dedicated 3E400N04-UA4 chipbreaker, which stabilises cutting forces and reduces the risk of built-up edge. For production-oriented workshops the result is fewer interruptions and more consistent cycle times. The chipshape management shown by this design helps to maintain tool life and reduces scrap rates when machining common ISO groups P and K (Stahl and Gusseisen). By converting cutting stability into measurable uptime, the component supports tighter process windows and repeatable surface quality. Coating and grade: engineered for wear resistance and heat management The WKP33S grade, part of the Tiger·tec Silver family, is a coated carbide solution optimised for the thermal and abrasive conditions encountered when turning Stahl and Gusseisen. The multi-layer coating enhances oxidation resistance and improves edge stability at elevated cutting temperatures, while the substrate provides a balance between toughness and hardness. In practical terms, this means improved resistance to flank wear during medium- to high-speed operations and better tolerance to interruptions or unstable setups. The technology is especially advantageous where consistent dimensional results and extended tool life are priorities. Practical benefits for machining shops and production lines Integrating this insert into routine turning operations enables more consistent part finishes and lower tool-change frequency, translating into economic benefits over production runs. The combination of grade and chipbreaker reduces manual chip handling and simplifies automation integration, which is valuable for CNC cells and lights-out manufacturing. For toolroom and series-production settings alike, the insert supports systematic cutting parameter adjustments rather than frequent ad hoc fixes, helping to standardise operations and cut overall process variance. Contact Metav Werkzeuge for application recommendations, availability and to discuss suitability of Walter Tools Tiger·tec Silver inserts; eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number: GX24-3E400N04-UA4-WKP33S-WALTER Product type: indexable turning insert Designation: GX24-3E400N04-UA4 WKP33S Brand: Walter Tools Series: Tiger·tec Silver Grade: WKP33S Chipbreaker: 3E400N04-UA4 Material application: P / K Facts ISO material groups: P, K Coating technology: Tiger·tec Silver Applicable workpiece materials: Stahl, Gusseisen Special features Coated carbide grade optimized for heat resistance Stable chip control for reliable production Balanced toughness for interrupted cuts Suitable for medium to high cutting speeds FAQ What materials is this insert suitable for? The GX24-3E400N04-UA4 WKP33S insert from Walter Tools is suitable for machining Stahl and Gusseisen, corresponding to ISO groups P and K. How does the Tiger·tec Silver coating help in production? The Tiger·tec Silver coating on the WKP33S grade increases oxidation and wear resistance, helping the insert maintain edge stability and extend tool life under elevated temperatures. Which chipbreaker should be selected for consistent chips? The integrated 3E400N04-UA4 chipbreaker provides reliable chip formation and is specified for consistent performance when machining Stahl and Gusseisen with this grade. Is this insert suitable for automated turning cells? Yes, the combination of WKP33S and the 3E400N04-UA4 chipbreaker simplifies chip control and is well suited to automated CNC turning applications and production cells. Can this grade handle interrupted cuts? The WKP33S grade provides a balance of toughness and hardness, offering robust performance in occasional interrupted cuts typical in production environments. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX24-3E400N04-UD4 WKP13S WKP13S Wendeplatten - Walter Tools
Engineered for productive turning, the insert pairs the wear-resistant WKP13S grade with Tiger·tec Silver coating and a dedicated chipbreaker for consistent edge life and controlled swarf. Benefit from improved process security and fewer tool changes — order the GX24-3E400N04-UD4 WKP13S directly via Metav Werkzeuge or consult the technical team for optimal machining data. GX24-3E400N04-UD4 WKP13S indexable turning insert – Tiger·tec Silver, Walter Tools GX24-3E400N04-UD4 WKP13S is an indexable turning insert engineered for productive machining of steel and cast iron, combining a robust WKP13S carbide grade with Tiger·tec Silver coating for reliable performance in demanding turning operations Tiger·tec Silver coating for long tool life WKP13S grade optimised for steel and cast iron Precise chip control with 3E400N04-UD4 chipbreaker Stable edge and consistent performance Consistent productivity through engineered coating and grade The GX24-3E400N04-UD4 WKP13S insert delivers predictable wear behaviour thanks to the Tiger·tec Silver coating in combination with the WKP13S carbide grade. This configuration is optimised for the thermal and mechanical loads typical of ISO group P (steel) and K (cast iron) machining. The result is reduced variation in cutting-edge life and more stable cycle times on series production, which supports throughput targets and lowers unplanned downtime. Improved chip control and machining stability Equipped with the 3E400N04-UD4 chipbreaker geometry, the insert provides controlled swarf formation during turning, which simplifies chip evacuation and reduces the risk of surface damage. The engineered chipbreaker is particularly effective when machining medium to heavy interrupted cuts in steel and short-chipping cast iron grades, delivering a consistent surface finish and minimising rework. This translates into efficiency gains and easier process planning on the shop floor. Durability, repeatability and operational benefits The coated carbide composition ensures wear resistance and retains a sharp cutting edge under fluctuating cutting conditions. Hardness and coating combination result in fewer indexings and a longer useful life per edge, contributing to lower tool consumption and predictable replacement intervals. For workshops seeking reliable tool performance, the insert supports stable cutting parameters and repeatable results across batches, aiding quality control and cost-efficiency. Practical application advice and process fit The insert is suited to a wide range of turning tasks in component manufacture, from finishing passes that demand surface integrity to medium removal operations where edge life is prioritised. The designation and geometry follow established insert standards, facilitating selection of matching toolholders and assemblies. For best results, adapt feed and speed to workpiece material and machine stability, and consider coolant strategy to support the coated grade where required. For tailored machining recommendations and availability of the GX24-3E400N04-UD4 WKP13S, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss cutting parameters and delivery options. Technical data Article number: GX24-3E400N04-UD4-WKP13S-WALTER Designation: GX24-3E400N04-UD4 WKP13S Product type: indexable turning insert Manufacturer: Walter Tools Facts Series: Tiger·tec Silver Chipbreaker: 3E400N04-UD4 Grade: WKP13S Material suitability: P / K Special features Coated carbide (beschichtetes Hartmetall) Optimised for steel (P) and cast iron (K) Stable edge for repeatable machining Designed for productive turning applications FAQ Which materials are suitable for this insert? The GX24-3E400N04-UD4 WKP13S is designed for ISO group P (steel) and K (cast iron); the WKP13S grade and Tiger·tec Silver coating address the typical heat and abrasion characteristics of these materials. What advantage does the Tiger·tec Silver coating provide? Tiger·tec Silver enhances thermal resistance and wear protection, supporting longer edge life and consistent cutting behaviour under sustained loads in turning operations. How does the 3E400N04-UD4 chipbreaker affect machining? The 3E400N04-UD4 geometry offers controlled chip formation and evacuation, improving surface finish and reducing risks associated with poor swarf control during turning of steel and cast iron. Is this insert suitable for finishing and medium removal? Yes, the insert is applicable across finishing to medium removal tasks; the combination of grade and chipbreaker balances surface integrity with tool life for varied turning operations. What distinguishes the WKP13S grade from other grades? WKP13S is a Walter Tools coated carbide grade formulated for broad process reliability on steel and cast iron, emphasising wear resistance and stable edge performance for consistent production results. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are mentioned for explanatory purposes only. No connection exists between our company and the mentioned brands. The offered article is original, factory-new goods of the manufacturer.
GX24-3E400N04-UD4 WKP23S Wendeplatten - Walter Tools
Take advantage of proven Tiger·tec Silver coating and the WKP23S grade for reliable, long-lasting performance in steel and cast-iron turning; order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. GX24-3E400N04-UD4 WKP23S — Indexable turning insert, Tiger·tec Silver for steel & cast iron (Walter Tools) The GX24-3E400N04-UD4 WKP23S is an indexable turning insert engineered for productive machining of steel and cast iron in industrial turning operations. Tiger·tec Silver coated carbide Optimised chipbreaker 3E400N04-UD4 Suitable for steel and cast iron Designed for long tool life and reliability Boosted productivity with advanced Tiger·tec Silver technology The Tiger·tec Silver coating, combined with the WKP23S grade, delivers a reliable balance of wear resistance and toughness that directly improves cycle times. In practical terms, the coated carbide substrate reduces flank wear and resists abrasive attack typical of cast-iron workpieces while maintaining edge stability during steel turning. This technological pairing is particularly valuable in high-volume production where consistent performance and reduced tool changes lead to measurable productivity gains and lower process costs. Consistent chip control and surface quality from geometry engineering The integrated chipbreaker 3E400N04-UD4 is optimised for controlled chip formation and evacuation when machining ISO groups P (steel) and K (cast iron). The geometry influences chip flow, reducing the risk of built-up edge and improving surface finish on each pass. For engineers less familiar with chipbreakers: this element shapes the way metal curls and breaks away, so effective geometry reduces interruptions, protects the cutting edge and contributes to more consistent component tolerances. The result is fewer rework cycles and a steadier production output. Seamless fit into industrial turning toolsets and process chains As an indexable turning insert, this component integrates with standard toolholders and turning systems used in modern workshops. The insert’s design supports repeatable positioning and fast reversal of cutting edges, so maintenance routines are simplified and downtime is reduced. By favouring stable edge life and predictable wear behaviour, the insert supports longer intervals between tool changes and more reliable batch processing. For operations seeking to improve overall equipment effectiveness, the insert offers a practical route to better throughput with minimal process adjustment. For application advice or to specify GX24-3E400N04-UD4 WKP23S for a particular machining task, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants provide pragmatic, technical guidance. Technical Data SKU: GX24-3E400N04-UD4-WKP23S-WALTER Article: Drehwendeschneidplatte GX24-3E400N04-UD4 WKP23S Series: Tiger·tec Silver Grade: WKP23S Chipbreaker: 3E400N04-UD4 Manufacturer: Walter Tools Facts Material groups: P (steel), K (cast iron) Material designation: P / K ISO designation: GX24-3E400N04-UD4 WKP23S Special features Coating: Tiger·tec Silver (coated carbide) Geometry: Optimised chip control for turning Application: Indexable insert for turning operations Main benefits: Improved tool life, stable edge performance FAQ What materials is this insert suitable for? The GX24-3E400N04-UD4 WKP23S insert is designed for ISO groups P and K, meaning it is suitable for machining steel and cast iron. What advantages does the Tiger·tec Silver coating provide? Tiger·tec Silver increases wear resistance and thermal stability, helping the WKP23S grade maintain cutting-edge integrity for longer in demanding turning cycles. How does the 3E400N04-UD4 chipbreaker improve machining? The 3E400N04-UD4 chipbreaker promotes controlled chip formation and evacuation, reducing built-up edge and improving surface finish during both roughing and finishing passes. Can this insert be used for stainless or pre-hardened steels? Stainless steel and pre-hardened materials are not specified for this grade; the GX24-3E400N04-UD4 WKP23S is optimised primarily for steel and cast-iron applications. Is the insert compatible with standard turning toolholders? Yes, the indexable design enables integration with common turning toolholders and supports rapid indexing for edge changes. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Mention of brand names is for explanatory purposes only and does not indicate any affiliation. The offered item is original, factory-new merchandise from the named manufacturer.
GX24-3E400N04-UD4 WKP33S WKP33S Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, consistent chip control and broad material applicability for reliable turning cycles; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. GX24-3E400N04-UD4 WKP33S turning indexable insert — Tiger‑tec Silver coated for steel and cast iron, Walter Tools A GX24-3E400N04-UD4 WKP33S turning indexable insert engineered for high-process stability in turning operations on steel and cast iron, offering a coated carbide grade optimised for consistent cutting performance Tiger‑tec Silver coating for extended life WKP33S grade for coated carbide performance Optimised chip control for steel and cast iron Stable cutting edge for productive machining Higher productivity through reliable cutting performance The combination of the Tiger‑tec Silver coating and the WKP33S carbide grade delivers measurable gains in process reliability. Designed for typical heat development and chip formation when machining steel, and for the abrasive, breakable chips encountered with cast iron, this insert reduces tool-change frequency and supports steady cycle times. The coated substrate improves resistance to abrasive wear while maintaining edge stability, which results in fewer interruptions and more predictable throughput. Practical benefits at the machine: less downtime, more parts Built around a chipbreaker geometry labelled 3E400N04-UD4, the insert channels and fractures swarf reliably, reducing the risk of stringing or tool interference. A chipbreaker is a purpose‑designed groove or topography on the insert that controls how chips curl and break; applying this feature in turning operations simplifies swarf handling and protects the workpiece finish. The outcome is a combination of improved surface quality and reduced manual clearing, contributing to lower effective machining costs and enhanced operator safety. Clear material range and application guidance Specified for material groups P / K, the insert is suitable for a broad spectrum of unalloyed and alloyed steels as well as common cast irons according to ISO classification. The designation GX24‑3E400N04‑UD4 identifies the geometry and cutting edge form, while the WKP33S grade indicates a coated cemented carbide tuned for these workpiece families. For shops seeking repeatable results across batch and prototype runs, the insert’s engineering supports consistent dimensional accuracy and predictable tool life with compatible turning toolholders. Discuss Walter Tools’ GX24-3E400N04-UD4 WKP33S insert with Metav Werkzeuge to evaluate suitability for specific components—contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for tailored recommendations and delivery options Technical Data Article number: GX24-3E400N04-UD4-WKP33S-WALTER Type: Turning indexable insert Designation: GX24-3E400N04-UD4 WKP33S Series: Tiger‑tec Silver Grade: WKP33S Manufacturer: Walter Tools Facts Material group: P / K Suitable for: Steel, Cast iron Chipbreaker: 3E400N04-UD4 SKU: GX24-3E400N04-UD4-WKP33S-WALTER Special features Coating: Tiger‑tec Silver (coated carbide) Application focus: turning operations with optimised chip control Benefit: enhanced wear resistance and edge stability Typical use: production and batch machining FAQ What materials is this insert intended for? The GX24-3E400N04-UD4 WKP33S insert is specified for ISO groups P and K, meaning it is intended for machining various steels and cast irons. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating on the WKP33S grade increases resistance to abrasive wear and helps maintain a stable cutting edge, extending the effective service life of the insert. What does the chipbreaker code 3E400N04-UD4 mean for daily use? The 3E400N04-UD4 chipbreaker denotes the insert’s topography and edge form designed to control chip formation during turning, which simplifies swarf management and supports consistent surface quality. Can this insert be used for stainless or pre‑hardened steels? The insert is specified for material groups P (steel) and K (cast iron); no classification for stainless or pre‑hardened steels is provided in the data, so selection for those materials should be confirmed with an application specialist. Is this product compatible with standard turning toolholders? The GX24-3E400N04-UD4 WKP33S is an indexable turning insert; compatibility depends on the toolholder seat and clamping system—verify the holder’s insert pocket for the GX24 geometry. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; Walter Tools is a brand of Walter AG. Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered article is original, brand‑new merchandise from the manufacturer.
GX24-3E400N04-UD4 WSM33S WSM33S Wendeplatten - Walter Tools
Benefit from Tiger‑tec Silver wear resistance and the optimised 3E400N04‑UD4 chipbreaker for reliable machining of stainless steel and heat‑resistant alloys; the combination improves process stability and reduces rework. Order via Metav Werkzeuge or consult our specialists for application support. GX24-3E400N04-UD4 WSM33S indexable turning insert — Tiger‑tec Silver, chipbreaker 3E400N04-UD4 (Walter Tools) A GX24-3E400N04-UD4 WSM33S indexable insert designed for heavy‑duty turning of stainless steel and high‑temperature superalloys, offering stable cutting edges and consistent chip control Tiger‑tec Silver coating for high wear resistance Optimised 3E400N04‑UD4 chipbreaker geometry Designed for stainless steel and superalloys Stable cutting edge and reliable chip control Increased productivity through coating and grade optimisation The Tiger‑tec Silver coating combined with the WSM33S grade delivers measurable gains in tool life and process reliability when machining demanding materials. Coated carbide substrates are engineered to withstand elevated temperatures and abrasive wear, so the cutting edge keeps form longer and interventions for tool changes are reduced. For manufacturers working with stainless steel or nickel‑based alloys, this results in fewer stoppages, improved first‑pass yield and a more predictable production rhythm. The design focuses on sustaining a stable cutting edge under high thermal and mechanical loads. Predictable chip control for safer, faster turning The 3E400N04‑UD4 chipbreaker is tailored to break and evacuate chips reliably during turning operations, which lowers the risk of built‑up edge and workpiece surface damage. A chipbreaker directs deformation into manageable fragments and supports stable cutting conditions; in practice this means shorter cycle times and less need for manual chip clearing. The geometry was developed to balance shear and compression so that chip flow remains consistent even in long turning cycles. As a result, workshops can expect enhanced machine uptime and reduced post‑process cleaning. Application benefits and integration into production Specified for ISO groups M and S, the insert is particularly suitable where stainless steel and heat‑resistant superalloys present machining challenges such as high heat generation and poor thermal conductivity. The coated carbide composition plus the WSM33S chemistry emphasise both wear resistance and edge robustness, helping to maintain surface finish quality over extended runs. Selection of the appropriate insert geometry and cutting data will maximise the economic advantage: fewer insert changes, consistent part quality and simplified tool inventory management. Walter Tools’ development focus on process security supports reproducible results in serial production. Contact Metav Werkzeuge for tailored advice on Walter Tools GX24-3E400N04-UD4 WSM33S inserts, availability and application recommendations; eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930 Technical data Article number: GX24-3E400N04-UD4-WSM33S-WALTER Name: GX24-3E400N04-UD4 WSM33S indexable turning insert Manufacturer: Walter Tools Product type: indexable turning insert Facts Grade: WSM33S Series: Tiger‑tec Silver Chipbreaker: 3E400N04‑UD4 Applicable ISO groups: M, S Material designation: S / M Versions / Special features Coating: Tiger‑tec Silver Substrate type: coated carbide Application: stainless steel and heat‑resistant superalloys Benefit focus: stable chip formation and long tool life FAQ What materials is the GX24-3E400N04-UD4 WSM33S insert suited for? The GX24-3E400N04-UD4 WSM33S insert is intended for stainless steel and heat‑resistant superalloys (ISO groups M and S), where heat resistance and edge stability are critical. How does the 3E400N04‑UD4 chipbreaker improve machining? The 3E400N04‑UD4 chipbreaker promotes consistent chip segmentation and evacuation, reducing built‑up edge and supporting a stable cutting process with fewer interruptions. Is the insert coated and what is the coating benefit? Yes, the insert uses the Tiger‑tec Silver coating on a coated carbide substrate; this combination increases wear resistance and supports a longer service life under high temperatures. Which production scenarios benefit most from this insert? Turning operations on stainless steel or nickel‑based alloys with demanding thermal loads benefit most, where consistent surface quality and lowered tool change frequency are priorities. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
GX24-3E400N04-UD6 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the combination of high-temperature edge stability and secure chip formation to increase process reliability and reduce rework; order the insert through Metav Werkzeuge or consult their specialists for machining parameter recommendations. GX24-3E400N04-UD6 WSM23S Drehwendeschneidplatte — Tiger·tec Silver, coated carbide, for rostfreier Stahl and superalloys | Walter Tools GX24-3E400N04-UD6 WSM23S is a coated carbide turning insert from the Tiger·tec Silver series, optimised for demanding applications in rostfreier Stahl and heat-resistant superalloys. Tiger·tec Silver coating for temperature stability WSM23S grade for secure chip formation Optimised for rostfreier Stahl and superalloys Stable cutting edge for consistent productivity Reliable edge life for demanding materials The insert’s Tiger·tec Silver technology combines a wear-resistant coating with a robust substrate to provide stable cutting edge behaviour under elevated temperatures. This results in extended tool life when machining materials prone to work hardening, such as rostfreier Stahl and nickel-based alloys. For production environments where predictable tool performance is essential, the coated carbide construction reduces the frequency of index changes and supports consistent part quality. Predictable chip control and surface finish The geometry identified as 3E400N04-UD6 is engineered to promote reliable chip formation and evacuation. Improved chip control reduces interruptions from built-up edge and chip entanglement, which in turn lowers the risk of surface defects and unplanned machine stops. For operators and process planners, this translates into fewer rejects and a steadier cycle time, enhancing overall productivity on turning operations. Suited for rostfreier Stahl and heat-resistant alloys Rated for material groups M and S, the grade WSM23S is tailored to handle the challenges of rostfreier Stahl as well as heat-resistant superalloys and titanium. The alloy-specific behaviour—poor heat conduction and tendency to strain-harden—necessitates an insert that maintains edge integrity and resists adhesion. The combination of substrate and coating in this insert supports these requirements, enabling reliable machining where conventional grades may fail prematurely. Practical benefits for workshop and CAM programming Integrating this indexable plate into production offers tangible process advantages: reduced tool changeover times, improved reproducibility of turning cycles and fewer secondary operations for surface remediation. For CAM programming, the stable cutting forces and predictable wear pattern simplify cycle-time estimation and feeder logic. The insert’s designation and series make it straightforward to specify in tool lists and ERP systems, supporting efficient procurement and inventory control. Contact Metav Werkzeuge for application advice and stock information — Metav Werkzeuge can assist with recommended cutting data for the GX24-3E400N04-UD6 WSM23S insert and local availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: GX24-3E400N04-UD6-WSM23S-WALTER Product: Drehwendeschneidplatte (turning indexable insert) Grade / Sort: WSM23S Series: Tiger·tec Silver Manufacturer: Walter Tools Facts Material suitability: S / M Geometry / chipbreaker: 3E400N04-UD6 SKU: GX24-3E400N04-UD6-WSM23S-WALTER Special features Coating: Tiger·tec Silver (coated carbide) Optimised for: rostfreier Stahl (ISO group M), superalloys and titanium (ISO group S) Benefits: stable cutting edge, secure chip formation, improved process reliability FAQ What materials is this insert designed for? The GX24-3E400N04-UD6 WSM23S insert is formulated for machining rostfreier Stahl and heat-resistant superalloys, reflecting its S / M suitability. What advantage does the Tiger·tec Silver series provide? Tiger·tec Silver yields improved edge temperature resistance and wear behaviour, helping the WSM23S grade to maintain cutting performance under thermal load. How does the 3E400N04-UD6 chipbreaker affect machining? The 3E400N04-UD6 chipbreaker promotes predictable chip formation and evacuation, reducing the likelihood of built-up edge and supporting consistent surface finish. Is this insert recommended for finishing or roughing operations? Depending on the chosen cutting data and machine stiffness, the WSM23S grade can be applied for both roughing and semi-finishing where thermal and adhesive wear are concerns. How should the insert be specified in procurement systems? Refer to the SKU GX24-3E400N04-UD6-WSM23S-WALTER and include series Tiger·tec Silver and grade WSM23S for clear identification. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. The mentioned brand names are used solely for explanation. The offered article is original, factory-new merchandise of the manufacturer.
GX24-3E400N04-UD6 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of high thermal stability, robust chip control and extended tool life for dependable turning in demanding materials; order the insert through Metav Werkzeuge or consult their specialists for cutting data and process integration. GX24-3E400N04-UD6 WSM33S indexable turning insert – Tiger·tec Silver, for rostfreier Stahl and superalloys (Walter Tools) The GX24-3E400N04-UD6 WSM33S is an indexable turning insert engineered for demanding turning operations in rostfreier Stahl and heat-resistant alloys, offering a balance between edge stability and wear resistance for sustained production. Tiger·tec Silver coated carbide grade WSM33S Optimised chip control 3E400N04-UD6 geometry Designed for rostfreier Stahl and heat-resistant alloys Stable cutting edge for heavy-duty turning Deliver consistent productivity with a coating built for heat The combination of the Tiger·tec Silver coating and the WSM33S grade provides a clear performance advantage when machining materials that generate heat and resist chip evacuation. The advanced coating increases thermal stability and reduces flank wear, which in turn extends tool life and reduces changeover frequency. The described chipbreaker geometry 3E400N04-UD6 promotes predictable chip control, decreasing the risk of built-up edge and improving cycle-time consistency on long runs. These technical attributes translate into fewer interruptions and a more predictable production flow for machining rostfreier Stahl and similar tough alloys. Secure process reliability and repeatable surface quality The insert’s specification emphasises a stable cutting edge and a coated carbide substrate engineered for abrasive and adhesive wear mechanisms common in superalloys and rostfreier Stahl. This results in reliable dimensional accuracy and repeatable surface finish across batches. The substrate and coating interaction supports steady cutting forces, which benefits machine-tool loading and fixture life. For operations where tolerance retention and reduced rework matter, the insert helps to maintain consistent outputs and supports higher first-pass yield rates. Simplified integration with shopfloor routines and support Selection of the correct insert geometry and grade reduces trial-and-error on the shopfloor: the GX24-3E400N04-UD6 WSM33S is specified for the ISO material groups M and S, indicating suitability for rostfreier Stahl as well as heat-resistant superalloys and titanium depending on the cutter geometry. For cutting parameter setup or process sheets, Metav Werkzeuge can supply relevant data and advice to match spindle speed, feed and depth of cut to the workpiece. Practical support and clear cutting recommendations reduce setup time and help to realise the performance benefits of the insert faster, improving throughput and operational confidence. Contact Metav Werkzeuge for tailored cutting data and to discuss the Walter Tools GX24-3E400N04-UD6 WSM33S insert and its suitability for rostfreier Stahl applications Technical data SKU: GX24-3E400N04-UD6-WSM33S-WALTER Product type: indexable turning insert Designation: GX24-3E400N04-UD6 WSM33S Facts Series: Tiger·tec Silver Grade: WSM33S Chipbreaker: 3E400N04-UD6 Material group: S / M Special features Coating: Tiger·tec Silver (coated carbide) Applications: rostfreier Stahl; heat-resistant superalloys and titanium Key property: stable cutting edge and wear resistance FAQ What materials is this insert designed for? The Walter Tools GX24-3E400N04-UD6 WSM33S insert is intended for rostfreier Stahl (ISO group M) and heat-resistant superalloys/titanium (ISO group S), depending on tool geometry. What advantages does the Tiger·tec Silver coating deliver? The Tiger·tec Silver coating on the WSM33S grade improves thermal stability and wear resistance, supporting longer tool life and consistent cutting performance in high-temperature conditions. What does the chipbreaker code 3E400N04-UD6 indicate? The chipbreaker 3E400N04-UD6 denotes the insert geometry optimised for controlled chip formation and evacuation under heavy-duty turning, enhancing process stability and surface quality. Is this insert suitable for high-feed or heavy roughing operations? The insert’s design and stable cutting edge make it appropriate for demanding roughing duties in rostfreier Stahl and superalloys when paired with suitable toolholders and machining parameters. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and product names belong to their respective owners. The mentioned brand is used solely for explanatory purposes. The offered article is original, brand-new production from the manufacturer.
GX24-3E400N04-UF4 WKP23S WKP23S Wendeplatten - Walter Tools - coating: Tiger-tec Silver - material: coated carbide - application: machining steel - application: machining cast iron
Benefit from the combination of the Tiger‑tec Silver coating and the WKP23S grade for consistent edge life and reliable chip control in turning operations; order the insert directly via Metav Werkzeuge or contact the consultants for application advice. GX24-3E400N04-UF4 WKP23S — Indexable turning insert for steel and cast iron (Tiger‑tec Silver) by Walter Tools A GX24-3E400N04-UF4 WKP23S indexable turning insert engineered for efficient machining of steel and cast iron, optimised for steady material removal and predictable chip formation in industrial turning. Tiger‑tec Silver coated carbide WKP23S grade for long tool life Optimised chipformer 3E400N04‑UF4 Suitable for steel and cast iron Maximise productivity with stable cutting performance The combination of the Tiger‑tec Silver coating and the WKP23S carbide grade provides a clear advantage where consistent performance matters. The coating reduces abrasive and adhesive wear while the substrate retains toughness, which together translate into longer tool life and fewer insert changes. This results in improved machine uptime and a lower cost per machined component. The insert geometry, identified by the GX24-3E400N04-UF4 designation, is designed to maintain a reproducible cutting edge under typical turning loads, supporting stable cutting conditions and predictable finish quality. Precise chip control for uninterrupted production Chip formation is a decisive factor for process security; the integrated 3E400N04‑UF4 chipformer is optimised to produce short, broken chips for both P (steel) and K (cast iron) material groups. Short, controllable chips reduce the risk of component or tool damage and simplify handling in automated environments. In practical terms, this means fewer interruptions for chip clearing and a reduced likelihood of surface defects caused by errant swarf. The specification targets industrial turning where repeatable chip control contributes directly to a steady production flow. Consistent edge stability and predictable component quality As a coated carbide turning grade, the insert offers a balance between wear resistance and edge strength, which is particularly beneficial when facing variable batch sizes and mixed material runs. The WKP23S grade is tuned for the tribological conditions typical of steel and cast iron turning, enabling consistent dimensional results across a production series. For process planners, this results in reliable tool life estimations and simpler inventory planning. When combined with appropriate cutting data and toolholder selection, the insert supports reproducible surface quality and stable cycle times. For tailored cutting data, availability and application advice for Walter Tools Tiger‑tec Silver inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for expert support and supply options. Technical Data SKU: GX24-3E400N04-WKP23S-WALTER Designation: GX24-3E400N04-UF4 WKP23S Product type: Indexable turning insert Series: Tiger‑tec Silver Grade: WKP23S Material code: P / K Core data Chipbreaker: 3E400N04‑UF4 Application groups: P (steel), K (cast iron) ISO designation: GX24-3E400N04-UF4 WKP23S Special features Coated carbide (coated hardmetal) Optimised chip control Suitable for steel and cast iron machining Brand: Walter Tools FAQ What materials is this insert suitable for? The insert GX24-3E400N04-UF4 WKP23S is specified for ISO groups P and K, meaning it is suitable for machining steel and cast iron. What does the WKP23S grade offer in practice? WKP23S is a coated carbide grade that combines wear resistance with edge stability, improving tool life and maintaining consistent surface quality in turning operations. How does the 3E400N04‑UF4 chipformer improve production? The 3E400N04‑UF4 chipformer is designed to produce short, controllable chips, which reduces machining interruptions and supports safer, more efficient automated turning. Is this insert compatible with high‑productivity turning? Yes, the design and Tiger‑tec Silver coating of the GX24-3E400N04-UF4 WKP23S support medium to high productivity applications by enhancing wear resistance and process stability. Where can cutting data for this Walter Tools insert be obtained? Cutting parameters and recommended toolholder pairings for the GX24-3E400N04-UF4 WKP23S are available from technical documentation and from Metav Werkzeuge upon request. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) with head office in Tübingen is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names are used for explanatory purposes only; no affiliation with our company is implied. The offered item is an original, factory‑new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com