GX24-3E400N04-UF4 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the combination of heat-resistant Tiger‑tec Silver coating, the WSM23S grade and the 3E400N04‑UF4 chipbreaker for consistent chip control and reliable edge life in demanding turning operations; Order the GX24-3E400N04-UF4 WSM23S indexable turning insert directly via Metav Werkzeuge or ask our consultants if needed. GX24-3E400N04-UF4 WSM23S indexable turning insert — Tiger‑tec Silver, Walter Tools the GX24-3E400N04-UF4 WSM23S is a coated carbide indexable turning insert engineered for secure chip formation and thermal stability when machining stainless steels and heat-resistant superalloys Tiger‑tec Silver coated carbide technology Grade WSM23S for stainless and superalloys 3E400N04‑UF4 chipbreaker for stable chips Suitable for heavy-duty turning operations Higher process stability for tough materials The combination of the Tiger‑tec Silver coating and the WSM23S grade delivers improved resistance to thermal loading and wear. The coated carbide substrate is designed to slow heat transfer to the cutting edge, which reduces edge degradation during long cuts in stainless steels and superalloys. This translates into fewer unscheduled tool changes and a steadier surface finish, supporting more predictable cycle times and higher throughput. Consistent chip control and secure edge life The 3E400N04‑UF4 chipbreaker geometry promotes stable chip formation, helping to avoid built-up edge and chip entanglement in demanding turning tasks. Stable chips reduce the risk of rework and part damage while maintaining cutter integrity. For practical operations, this means improved tool life and less variability in finishing passes, enabling tighter process control and a reduction in overall machining costs. Application-focused benefits across ISO groups M and S Engineered for ISO groups M (stainless steels) and S (heat-resistant superalloys and titanium), the insert supports machining strategies where thermal stability and edge strength are paramount. The grade’s balance between toughness and hardness allows for reliable performance in materials that tend to work‑harden or generate high cutting temperatures. When combined with appropriate feeds and depths of cut, the insert helps maintain dimensional accuracy and surface integrity on critical components. Productivity and integration in workshop processes As a high-performance indexable insert from Walter Tools, the design emphasises repeatability and process security. The coated carbide and chipbreaker work together to lower the frequency of tool changes and to stabilise output quality, which supports leaner production routines. For procurement and planning, adoption of this insert can contribute to more uniform tool inventories and simplified cutting parameter setups across batches and machine platforms. Contact Metav Werkzeuge for application advice, availability and to discuss how Walter Tools Tiger‑tec Silver inserts can improve machining stability — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: GX24-3E400N04-UF4-WSM23S-WALTER Designation: GX24-3E400N04-UF4 WSM23S Type: Indexable turning insert (coated carbide) Manufacturer: Walter Tools Facts Grade: WSM23S Series: Tiger‑tec Silver Chipbreaker: 3E400N04‑UF4 Applicable ISO groups: M, S Special features Coated carbide (beschichtetes Hartmetall) Suitable for stainless steels (ISO M) Suitable for superalloys and titanium (ISO S) Designed for stable chip formation and edge stability FAQ What materials is this insert suitable for? The GX24-3E400N04-UF4 WSM23S insert is suitable for stainless steels (ISO group M) and for heat-resistant superalloys and titanium (ISO group S), where thermal resistance and edge stability are required. What does the WSM23S grade mean in practice? WSM23S denotes a coated carbide grade within the Tiger‑tec Silver family, optimised for secure chip control and extended edge life when machining difficult-to-cut materials. How does the 3E400N04‑UF4 chipbreaker affect machining? The 3E400N04‑UF4 chipbreaker is designed to deliver stable chip formation, reducing the risk of built-up edge and facilitating continuous machining without chip-related interruptions. Can this insert be used for heavy roughing operations? Yes; the combination of WSM23S and the Tiger‑tec Silver coating supports robust turning tasks where heat generation and edge load are high, making it suitable for many heavy-duty roughing applications. Is the insert compatible with standard indexable toolholders? The insert is an industry-standard indexable turning insert intended for conventional toolholders that accept the GX24 family geometry; verification of seat and clamping compatibility is recommended before fitting. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory‑new goods of the manufacturer.
GX24-3E400N04-UF4 WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver thermal resistance, the WSM33S coated-carbide grade and optimised chip control to increase process reliability on stainless steels and superalloys; order the insert through Metav Werkzeuge or consult the team for application-specific recommendations. GX24-3E400N04-UF4 WSM33S indexable insert – Tiger·tec Silver, for stainless steels & superalloys (Walter Tools) The GX24-3E400N04-UF4 WSM33S is an indexable turning insert engineered for heavy-duty and heat-generating materials, offering a balance of thermal stability and edge security for demanding turning tasks. Tiger·tec Silver coating for thermal stability WSM33S coated carbide grade Optimised chip formation for difficult alloys High edge stability for stainless steel Reliable performance on heat-resistant and tough alloys The insert delivers consistent results where temperature and material toughness challenge standard grades. Thanks to the Tiger·tec Silver technology and the WSM33S composition, the cutting edge resists thermal softening and wear, which reduces the risk of built-up edge and unexpected tool changes. This stability supports longer uninterrupted cycles and predictable tool life, helping to maintain throughput in production environments that machine stainless steels and nickel-based superalloys. Improved chip control and process predictability Built-in chipbreaker geometry and grade pairing enable controlled chip formation even with sticky or work-hardening materials. The optimised chip formation reduces the chance of entangling long chips while improving surface finish and protecting the toolholder and workpiece. For operations that demand repeatable results, the combination of coating and geometry contributes to fewer interruptions and a smoother process flow, translating into measurable time savings on complex turning operations. Practical benefits for workshop selection and set-up Selection is simplified by the clear material groups covered: ISO group M for stainless steels and ISO group S for heat-resistant superalloys and titanium. The insert’s coated carbide composition suits elevated cutting temperatures and mechanical loads; operators will appreciate predictable wear patterns and reduced regrinding frequency. Where application data is limited, the insert’s generalist strengths make it a sound first choice for mixed-material batches or jobs with variable cut conditions. Why this insert matters for production quality Stable cutting edges mean fewer rejects and better surface integrity on critical components. The insert’s balanced design helps maintain dimensional accuracy across runs and supports consistent surface quality, which is particularly important in sectors such as aerospace and medical component manufacturing. By prioritising edge stability and thermal resistance, the insert enhances both process reliability and final-part quality, thereby contributing to overall operational efficiency. For specification checks, grade matching or to select the right Walter Tools Tiger·tec Silver WSM33S insert for a particular stainless steel or superalloy application, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss tailored recommendations and availability Technical data Article number: GX24-3E400N04-UF4-WSM33S-WALTER Label: Drehwendeschneidplatte GX24-3E400N04-UF4 WSM33S Walter Tools SKU: GX24-3E400N04-UF4-WSM33S-WALTER Manufacturer: Walter Tools Core technical data Series: Tiger-tec Silver Grade: WSM33S Breaker / Geometry: 3E400N04-UF4 Material group: S / M Special features Coating: coated carbide (Tiger·tec Silver) Suitable for: stainless steels (ISO M), superalloys/titanium (ISO S) Product type: turning indexable insert Typical application: heavy-duty and heat-generating turning FAQ What materials is this insert suitable for? The GX24-3E400N04-UF4 WSM33S insert is designed for stainless steels (ISO group M) and heat-resistant superalloys or titanium (ISO group S), offering thermal resistance and edge stability. What benefits does the Tiger·tec Silver technology provide? Tiger·tec Silver on the WSM33S grade improves thermal resistance and wear behaviour, which helps maintain edge form and reduces the incidence of built-up edge during tough turning operations. How does the insert support chip control? The 3E400N04-UF4 chipbreaker geometry is optimised to produce short, controllable chips in difficult-to-machine alloys, improving surface finish and reducing risk to the toolholder. Is this insert suitable for mixed-material production runs? Yes, the combination of coated carbide and robust grade behaviour makes the insert a practical choice for mixed batches where both stainless steels and some superalloys are present. Where can I get application-specific recommendations? Metav Werkzeuge can advise on grade and geometry choice for specific parts and processes; contact the team to discuss cut data and holder compatibility. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any affiliation. The offered item is an original, factory-new product of the manufacturer.
GX24-3E400N04-UF4 WSM43S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating and the WSM43S grade for consistent chip control and extended cutting-edge life; the combination delivers process reliability and high productivity in demanding turning applications. Order the GX24-3E400N04‑UF4 WSM43S directly via Metav Werkzeuge or ask our consultants if needed. GX24-3E400N04‑UF4 WSM43S Drehwendeschneidplatte by Walter Tools — coated carbide grade with Tiger‑tec Silver for demanding turning The GX24-3E400N04‑UF4 WSM43S is an indexable turning insert optimised for heavy-duty machining of rostfreier Stahl and heat‑resistant superalloys, offering robust edge stability and improved wear resistance in continuous and interrupted cuts. Tiger‑tec Silver coating technology Grade WSM43S for high wear resistance Optimised chip control geometry Suitable for rostfreier Stahl and superalloys Durable coating and grade for extended tool life The combination of Tiger‑tec Silver technology and the WSM43S grade provides a coated carbide surface engineered for elevated temperatures and abrasive wear. This results in a pronounced improvement in heat resistance and a stable cutting edge, which together reduce the frequency of index changes and contribute to uninterrupted production runs. The coating supports higher cutting speeds while maintaining a predictable wear pattern, helping to protect machine uptime and improve overall throughput. Designed for rostfreier Stahl and demanding alloys Machining rostfreier Stahl and superalloys places high thermal and mechanical loads on the cutting edge. The insert’s substrate and coating balance toughness and hardness to counteract built‑up edge formation and thermal softening. As a consequence, the insert ensures reliable chip control and consistent surface finish when turning tough materials. For workshops processing components in aerospace, energy or medical manufacturing, this behaviour translates into fewer rejects and lower rework effort. Geometry tailored for consistent chip formation The design encoded in 3E400N04‑UF4 focuses on secure chip evacuation and reduced cutting forces during turning operations. The chipbreaker geometry promotes short, controllable chips that clear the machining zone, lowering the risk of chip entanglement and improving operator safety. In combination with a stable cutting edge, this geometry allows for dependable performance in both continuous and intermittent cuts, which supports predictable cycle times and easier process planning. Productivity and process reliability as operational benefits Using a grade that emphasises edge integrity and coating performance leads directly to improved productivity: longer index life, fewer tool changes and more consistent part quality. The insert’s behaviour helps to standardise setups across batches, simplifying tool management and reducing variance in machining results. For production environments where reproducibility and uptime matter, the insert contributes to measurable process improvements and supports leaner operating practices. Contact Metav Werkzeuge for tailored application advice on the Walter Tools Tiger‑tec Silver grade and to discuss suitable geometries for specific rostfreier Stahl alloys — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data SKU: GX24-3E400N04-UF4-WSM43S-WALTER Article designation: GX24-3E400N04‑UF4 WSM43S Product type: Drehwendeschneidplatte Series: Tiger‑tec Silver Grade: WSM43S Facts Material group: S / M Material applications: rostfreier Stahl Geometry / chipbreaker: 3E400N04‑UF4 Special features Coated carbide grade Designed for high thermal loads Optimised chip control Stable cutting edge for productive turning FAQ What materials is this insert best suited for? The GX24‑3E400N04‑UF4 WSM43S insert from Walter Tools is intended for rostfreier Stahl and heat‑resistant superalloys, delivering improved wear resistance and edge stability in these groups. What does the Tiger‑tec Silver designation mean for performance? Tiger‑tec Silver indicates a coating technology that enhances heat resistance and wear properties; the result with the WSM43S grade is longer index life and more consistent machining behaviour. How does the chipbreaker 3E400N04‑UF4 affect machining? The 3E400N04‑UF4 chipbreaker is engineered for secure chip formation and evacuation, producing short, controllable chips that protect the workpiece and tooling during turning. Is this insert suitable for interrupted cuts? Yes — the grade and geometry prioritise stable cutting edge behaviour, making the insert suitable for both continuous and interrupted turning operations where edge robustness is required. Can the insert improve process reliability in production? Applied correctly, the coated grade and optimised geometry reduce index changes and variance in results, supporting higher productivity and reproducible part quality with the GX24‑3E400N04‑UF4 WSM43S. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and product names belong to their respective owners. Mention of brand names serves explanation only; there is no connection between our company and the named brands. The offered item is original, factory‑new merchandise of the manufacturer.
GX24-3E400N04-UF8 WSM23S WSM23S Wendeplatten - Walter Tools
Benefit from proven heat resistance and edge stability thanks to the Tiger·tec Silver technology and the WSM23S coated‑carbide grade; the result is consistent tool life and secure chip control for demanding stainless and superalloy turning. Order the GX24‑3E400N04‑UF8 WSM23S insert directly via Metav Werkzeuge or consult our specialists for application advice. GX24-3E400N04‑UF8 WSM23S — Indexable turning insert, Tiger·tec Silver, Walter Tools A GX24-3E400N04‑UF8 WSM23S indexable turning insert engineered for heavy and heat‑generating workpieces, optimised for machining stainless steels and high‑temperature alloys in precision turning applications Tiger·tec Silver coating for thermal stability WSM23S coated carbide grade for tough materials Optimised chip control with 3E400N04‑UF8 geometry Suitable for stainless steels and superalloys Longer, more predictable tool life for tough alloys The combination of Tiger·tec Silver coating and the WSM23S grade provides a balance of thermal resistance and edge toughness that lengthens productive tool life. Coated carbide refers to a substrate of cemented carbide that is finished with a hard, wear‑resistant layer; this reduces flank wear and supports consistent cutting under elevated temperatures. For operations where heat builds up rapidly—typical when machining stainless steels or nickel‑based alloys—the coated surface delays the onset of micro‑cracking and crater wear, translating to fewer insert changes and steadier component quality. The clear technical benefit is reduced downtime and predictable cycle times in series production. Stable chip formation and reliable process security The 3E400N04‑UF8 chipbreaker geometry is designed to control swarf and maintain a stable cutting edge in challenging materials, improving surface finish and reducing the risk of built‑up edge. Controlled chip flow lowers the probability of entanglement or re‑cutting, which in turn preserves the insert’s edge and the workpiece integrity. In practical terms, stable chip control means fewer interruptions in long turning cycles and more consistent dimensional results. This geometry, combined with the coated‑carbide composition, delivers process security—a decisive advantage when reproducibility and component finish are critical. Clear guidance for machining and material selection Understanding the ISO material groups helps set expectations: M denotes stainless steels, which demand good heat management and edge stability; S denotes heat‑resistant superalloys and titanium, which require extreme thermal resistance. The insert’s design targets these groups, offering an application window where indexable inserts perform reliably under high thermal load and variable cutting conditions. For best results, select cutting speeds and feeds aligned to workpiece stiffness and machine power, favouring stable setups over aggressive parameters to exploit the insert’s strength: extended edge life and consistent surface quality. Contact Metav Werkzeuge for tailored cutting data, grade recommendations and to secure Tiger·tec Silver WSM23S inserts from Walter Tools Technical Data SKU: GX24-3E400N04-UF8-WSM23S-WALTER Designation: GX24-3E400N04‑UF8 WSM23S Product type: Indexable turning insert Manufacturer: Walter Tools Core data Grade: WSM23S Series: Tiger·tec Silver Chipbreaker / Geometry: 3E400N04‑UF8 Material groups: S / M Special features Coated carbide (Tiger·tec Silver technology) Suitable for stainless steels and heat‑resistant superalloys Optimised for stable chip formation and edge endurance ISO designation: GX24‑3E400N04‑UF8 WSM23S FAQ Which materials can be machined with this insert? The insert is designed for stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), offering thermal resistance and edge stability for these demanding materials. What coating and carbide grade does the insert use? It features the Tiger·tec Silver technology applied to a WSM23S coated‑carbide grade, combining wear resistance with toughness for elevated temperatures. How does the 3E400N04‑UF8 chipbreaker help in production? The 3E400N04‑UF8 geometry promotes compact, controllable chips and reduces the risk of built‑up edge, supporting consistent surface finish and longer insert life during continuous turning. Is this insert suitable for interrupted cuts and heavy machining? The grade and coating provide improved edge strength and thermal stability, making it appropriate for many heavy or semi‑interrupted turning tasks in stainless steels and certain superalloys when used with suitable parameter settings. How should cutting data be adapted for best performance? Optimise speeds and feeds for machine rigidity and workpiece clamping; prioritise stable setups and moderate parameters to exploit the insert’s process security and extend tool life. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names belong to their respective owners. Brand names are mentioned solely for explanation; there is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
GX24-3E400N08-UD4 WKP13S WKP13S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger‑tec Silver coating and the WKP13S grade for consistent process security and extended tool life in turning operations. The robust chipformer design ensures stable chip control when machining steel and cast iron, helping to maintain productivity and surface quality. Order directly via Metav Werkzeuge or request application advice from their consultants. GX24-3E400N08-UD4 WKP13S indexable turning insert — Tiger‑tec Silver, for steel & cast iron (Walter Tools) GX24-3E400N08-UD4 WKP13S is an indexable turning insert designed for productive general turning and finishing of a wide range of ferrous materials Tiger‑tec Silver coating for high process security WKP13S coated carbide grade for robust edge life Optimised chipformer 3E400N08‑UD4 for stable cutting Suited for steel and cast iron machining Enhanced cutting stability and reliable edge life The combination of the Tiger‑tec Silver coating and the WKP13S grade provides a coated carbide geometry that resists abrasive and thermal wear. This results in stable cutting and longer intervals between index changes, which contributes directly to higher machine utilisation and lower tool costs per component. The grade is optimised for the typical heat and chip formation encountered in the ISO 513 groups P (steel) and K (cast iron) so that operators benefit from predictable performance across mixed production batches. The insert form promotes consistent contact with the workpiece, improving surface finish without complex adjustments. Predictable chip control and increased productivity The engineered chipbreaker 3E400N08‑UD4 delivers controlled chip formation and evacuation in interrupted and continuous cuts, reducing the risk of built‑up edge and secondary machining. The design supports higher feed rates and stable cutting at common turning speeds, translating into measurable productivity gains on batch runs. Thanks to the coating technology and substrate selection, the insert sustains cutting conditions that would typically shorten the life of conventional grades, enabling longer uninterrupted cycles and better repeatability in serial production. The result is improved throughput with maintained quality. Practical integration for workshop efficiency This insert is compatible with standard turning toolholders and inserts of its geometry, so it can be introduced without retooling entire toolsets. The clear material designation (P / K) simplifies process planning: use this insert for unalloyed and alloyed steel as well as a range of cast iron grades. Application data and cutting parameters are available for specific operations; Metav Werkzeuge can provide recommended feeds and speeds for common setups to reduce trial time at the machine. The robust performance of the grade supports reliable lead times and consistent part quality, which is advantageous for jobbing shops and production lines alike. Contact Metav Werkzeuge for tailored cutting parameters, availability and quick application support for this Walter Tools insert Technical Data SKU: GX24-3E400N08-UD4-WKP13S-WALTER Product name: Drehwendeschneidplatte GX24-3E400N08-UD4 WKP13S Manufacturer: Walter Tools Product type: indexable turning insert Grade/Sort: WKP13S Series: Tiger‑tec Silver Chipformer: 3E400N08‑UD4 Material group: P / K UID: GX24-3E400N08-UD4-WKP13S-WALTER Facts No numeric data supplied ISO material groups referenced: ISO 513 P, K Special features Coating: Tiger‑tec Silver Substrate: coated carbide (WKP13S) Optimised chip control geometry 3E400N08‑UD4 Suitable for steel (P) and cast iron (K) Series focus: process security and productivity enhancement FAQ What materials is this insert designed for? The GX24-3E400N08-UD4 WKP13S insert is specified for steel (ISO group P) and cast iron (ISO group K), with the grade tuned for typical chip formation and thermal loads in these materials. How does the Tiger‑tec Silver coating benefit turning operations? The Tiger‑tec Silver coating reduces thermal and abrasive wear on the WKP13S substrate, leading to improved edge life and greater process security during extended cuts. What role does the 3E400N08‑UD4 chipformer play? The 3E400N08‑UD4 chipbreaker creates controlled chip shapes and reliable evacuation, decreasing the risk of chip entanglement and supporting higher feeds for improved productivity. Is this insert compatible with standard holders? The insert uses a common geometry for indexable turning plates; it fits holders and tool systems that accept the corresponding insert shape and clamping method. Can this insert be used for interrupted cuts? Yes, the combination of the WKP13S grade and the robust chipformer provides the resilience needed for many interrupted turning applications, particularly in steel and cast iron. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is original, factory‑new goods from the manufacturer Walter Tools.
GX24-3E400N08-UD4 WKP23S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, reliable chip control and broad material suitability for stable, productive turning operations; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. GX24-3E400N08-UD4 WKP23S Drehwendeschneidplatte – coated insert for Steel and Cast Iron machining (Walter Tools) The GX24-3E400N08-UD4 WKP23S is a coated indexable insert engineered for efficient turning of steel and cast iron, combining Tiger·tec Silver wear protection with a purpose-built chipbreaker for consistent chip formation and extended tool life Tiger·tec Silver coating for long tool life Optimised for Steel and Cast Iron machining Stable cutting edge and consistent chip control Longer tool life through advanced coating technology The Tiger·tec Silver technology provides a coated carbide substrate with enhanced thermal stability and reduced flank wear. This results in fewer tool changes and a more predictable process window, which supports higher uptimes on production lathes. The WKP23S grade balances toughness and abrasion resistance, making it suitable for interrupted cuts and mixed batch work where component variety demands consistent performance. Reliable chip control for safer, faster machining Equipped with the 3E400N08-UD4 chipbreaker geometry, the insert promotes controlled chip formation when machining P (steel) and K (cast iron) materials according to ISO groupings. Predictable chips reduce the risk of workpiece damage and machine downtime, improving cycle times and operator safety. The combination of geometry and grade helps maintain low cutting forces and supports stable feeds for a consistent surface finish. Geometry and edge stability for consistent results The insert’s ground and coated cutting edges deliver repeatable dimensional accuracy and surface quality across production runs. Edge integrity is optimised for repeated indexing, which reduces setup frequency and contributes to cost-effective operation. Thanks to the design focus on edge stability, the component offers high process reliability even under varying cutting conditions, supporting lean manufacturing strategies and shorter lead times. Practical benefits for the workshop and production line For job shops and larger production facilities, the insert provides an economical path to improved productivity: reduced tooling changes, better part quality, and simplified grade selection for mixed-material batches. The Tiger·tec Silver series and the WKP23S grade are intended to deliver a reliable balance between wear resistance and toughness, so that machining planners can focus on throughput and quality rather than frequent requalification of tooling. Contact Metav Werkzeuge to discuss Walter Tools inserts—secure GX24-3E400N08-UD4 WKP23S availability and receive tailored application guidance from our technical consultants at Metav Werkzeuge (info@metav-werkzeuge.com / +49 2822 7131930) Technical Data Article number: GX24-3E400N08-UD4-WKP23S-WALTER Name: Drehwendeschneidplatte GX24-3E400N08-UD4 WKP23S Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Facts Series: Tiger·tec Silver Grade: WKP23S Chipbreaker: 3E400N08-UD4 Material suitability: P (Steel), K (Cast iron) Special features Coating: Tiger·tec Silver Substrate: coated carbide (Hartmetall) Typical applications: turning of Steel and Cast iron Designation: GX24-3E400N08-UD4 WKP23S FAQ What materials is this insert suitable for? The GX24-3E400N08-UD4 WKP23S insert is specified for machining steel (P) and cast iron (K) materials, making it versatile for many turning tasks. How does the Tiger·tec Silver coating benefit machining? Tiger·tec Silver reduces flank wear and improves thermal resistance; the WKP23S grade combined with this coating extends service life and enhances process reliability under typical turning conditions. What does the chipbreaker 3E400N08-UD4 achieve? The 3E400N08-UD4 chipbreaker promotes controlled chip formation for safer extraction and consistent surface finish when turning P and K materials with this Walter Tools insert. Is this insert suitable for interrupted cuts? The WKP23S grade offers a balance of toughness and abrasion resistance that supports interrupted cutting scenarios commonly encountered in production turning. Can this insert reduce overall tooling costs? By extending cutting edge life and lowering the frequency of tool changes, the GK24 series insert contributes to reduced tooling-related downtime and improved shop-floor efficiency. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) headquartered in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned solely for explanatory purposes. There is no affiliation between our company and the referenced brands. The offered item is an original, factory-new product from the manufacturer.
GX24-3E400N08-UD4 WKP33S WKP33S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a robust WKP33S carbide grade and a precise chipbreaker geometry for consistent, productive turning of steel and cast iron; order original Walter Tools inserts directly via Metav Werkzeuge or consult our specialists for application guidance. GX24-3E400N08-UD4 WKP33S — Indexable turning insert for steel and cast iron (Tiger·tec Silver) by Walter Tools The GX24-3E400N08-UD4 WKP33S is an indexable turning insert designed for productive machining of steel and cast iron, combining a coated carbide grade in the Tiger·tec Silver series with a dedicated chipbreaker geometry. Tiger·tec Silver coated carbide Optimised for steel and cast iron machining Stable cutting edge and good wear resistance Consistent performance in productive turning Precision and productivity for demanding turning operations The Tiger·tec Silver series paired with the WKP33S grade ensures a robust carbide substrate and a hard, wear-resistant coating that extends cutting life and maintains dimensional stability during extended production runs. Thanks to the coating and substrate combination, the insert delivers consistent tool life and predictable performance, which reduces unscheduled tool changes and supports higher machine utilisation. The result is reliable cycle times and fewer interruptions in a production environment. Optimised for the thermal and abrasive challenges of P and K groups Designed specifically for ISO material groups P (steel) and K (cast iron), the geometry and coating address the distinct demands of these materials: effective heat management for steels and abrasion resistance for cast iron. The coating technology helps to reduce built-up edge formation on steels and to withstand the abrasive particulates encountered with cast components. This leads to improved surface integrity and fewer secondary finishing operations, providing a measurable benefit to throughput and overall component quality. Controlled chip formation and surface finish improvement The insert’s chipbreaker, code 3E400N08-UD4, is engineered to produce short, controllable chips under typical turning feeds and speeds, preventing chip entanglement and enhancing operator safety. Controlled chip flow reduces the risk of re-cutting and contributes to a more consistent surface finish, which can lower the need for further machining. Stable chip control also supports automated processes by lowering the likelihood of stoppages caused by poor chip evacuation. Seamless integration and process reliability in production This indexable insert is compatible with standard toolholder systems and is suitable for use in both small-batch and serial production. Its combination of coating, grade and geometry promotes process stability and repeatable results across varying job lots. For operations seeking to balance productivity with component quality, this insert represents a practical choice: it supports high material removal rates while helping to maintain tolerances and reduce the total cost of machining over time. The SKU GX24-3E400N08-UD4-WKP33S-WALTER identifies the original Walter Tools item for procurement and traceability. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Silver inserts and to confirm the suitable insert geometry for specific turning tasks: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: GX24-3E400N08-UD4-WKP33S-WALTER Article: GX24-3E400N08-UD4 WKP33S Type: Indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Series: Tiger·tec Silver Core data Chipbreaker: 3E400N08-UD4 Grade: WKP33S Applicable material groups: P, K SKU / UID: GX24-3E400N08-UD4-WKP33S-WALTER Special features Coating technology: Tiger·tec Silver Coated carbide grade suitable for steel and cast iron Designed for controlled chip formation Intended for productive turning operations FAQ What materials is this insert suitable for? The GX24-3E400N08-UD4 WKP33S insert is suitable for ISO groups P (steel) and K (cast iron), making it appropriate for a wide range of turning applications. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the WKP33S grade increases wear resistance and helps manage thermal loads, which improves tool life and process reliability during continuous turning. Which chipbreaker is fitted to this insert? This insert features the 3E400N08-UD4 chipbreaker, designed for short, consistent chips and reliable evacuation in turning operations. Is this an original Walter Tools product? Yes, the SKU GX24-3E400N08-UD4-WKP33S-WALTER refers to the original Walter Tools indexable insert, supplied as new and factory-manufactured. Can this insert reduce secondary finishing operations? By providing stable cutting and improved surface integrity on steels and cast iron, the insert can lower the need for additional finishing, depending on process parameters and tolerance requirements. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Mention of brand names such as Walter Tools is for identification and explanation only; there is no affiliation between Metav Werkzeuge and the named brands beyond the authorised sale of original, factory-new products.
GX24-3E400N08-UD4 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM33S grade for dependable edge stability and improved chip control when machining demanding alloys; the insert is engineered for high productivity and repeatable results. Order the insert directly via Metav Werkzeuge or consult our application specialists for cutting data and process optimisation. Drehwendeschneidplatte GX24-3E400N08-UD4 WSM33S – indexable turning insert for rostfreier Stahl and superalloys (Walter Tools) A GX24-3E400N08-UD4 WSM33S is an indexable turning insert engineered to provide reliable cutting performance in rostfreier Stahl and heat‑resistant superalloys for industrial turning applications Tiger·tec Silver coating technology WSM33S grade for high edge stability Suitable for rostfreier Stahl and superalloys Robust chip control geometry Consistent performance on hard-to-machine materials The combination of the Tiger·tec Silver coating and the WSM33S grade ensures a stable cutting edge under heavy thermal and mechanical load. The coated substrate is a coated cemented carbide designed to resist abrasive wear and thermal softening; this supports longer tool life and fewer tool changes, which increases uptime on the shop floor. For workshops processing rostfreier Stahl or nickel‑based materials, the insert’s metallurgy and coating work together to reduce edge breakdown and maintain surface finish quality. Improved process reliability through optimised chip control A dedicated chipbreaker geometry (designation 3E400N08‑UD4) promotes controlled chip formation and evacuation, reducing the risk of built‑up edge and workpiece rework. The insert’s geometry balances cutting forces to provide chip control without sacrificing material removal rates; this delivers predictable results and simplifies parameter selection for CNC turning cycles. Operators benefit from steady cutting behaviour, fewer interruptions and more consistent part quality during batch production. Designed for production efficiency and easy integration Select this grade where high process security and repeatable performance are required: the insert fits standard indexable toolholders and supports straightforward tool path strategies. Because the grade targets both rostfreier Stahl and heat‑resistant alloys, it minimises tool inventory for mixed‑material programmes and contributes to a leaner tooling concept. Technical teams can expect improved machining windows and better overall productivity when the insert is matched to appropriate feeds and speeds. Contact Metav Werkzeuge for tailored application advice on the Walter Tools GX24-3E400N08-UD4 WSM33S insert; request cutting data at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: GX24-3E400N08-UD4-WSM33S-WALTER Product type: Drehwendeschneidplatte (indexable turning insert) Brand: Walter Tools Series: Tiger-tec Silver Grade: WSM33S Core data No numeric specifications provided in the source data Special features Coating: Tiger·tec Silver Substrate: coated cemented carbide Chipbreaker designation: 3E400N08-UD4 Material suitability: rostfreier Stahl (stainless steels), heat‑resistant superalloys Application focus: heavy‑duty and difficult‑to‑cut materials FAQ What materials is this insert best suited for? The GX24-3E400N08-UD4 WSM33S insert is optimised for rostfreier Stahl and heat‑resistant superalloys, offering improved edge stability when machining these groups. How does the Tiger·tec Silver coating help in production? The Tiger·tec Silver coating on the WSM33S grade increases thermal resistance and wear protection, which helps the insert maintain cutting performance and extend tool life in demanding operations. Is the chipbreaker suitable for automated turning processes? Yes, the 3E400N08‑UD4 chipbreaker is designed for controlled chip formation and evacuation, making the insert appropriate for automated CNC turning with standard toolholders. Can this insert reduce the number of tool variants required? Because the WSM33S grade covers rostfreier Stahl and superalloys, using this insert can lower tooling variety in mixed‑material production, simplifying inventory and setup. Where to get recommended cutting data for this insert? Cutting data and application recommendations for the GX24-3E400N08-UD4 WSM33S can be obtained from Metav Werkzeuge or the Walter Tools technical documentation for best‑practice machining parameters. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
GX24-3E400N08-UF4 WKP23S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP23S carbide grade for dependable wear performance and predictable chip formation in serial turning. Order genuine stock through Metav Werkzeuge or consult our specialists for application-specific recommendations. GX24-3E400N08-UF4 WKP23S turning indexable insert – Tiger·tec Silver for steel & cast iron (Walter Tools) GX24-3E400N08-UF4 WKP23S is a Tiger·tec Silver indexable turning insert designed for productive finishing and roughing operations on steel and cast iron. Tiger·tec Silver coating technology Coated carbide grade WKP23S Suitable for steel (P) and cast iron (K) Chipbreaker geometry 3E400N08-UF4 Increased productivity through optimised coating technology The Tiger·tec Silver series combines a modern coating stack with a precisely engineered substrate to deliver consistent tool life and high process reliability. The WKP23S grade is a coated carbide that balances toughness and abrasion resistance, making it particularly effective where thermal loads and mixed wear mechanisms occur. For series production, this translates into fewer insert changes and more stable cycle times — a measurable contribution to shop-floor efficiency. Predictable chip control and surface quality The 3E400N08-UF4 chipbreaker geometry is developed to produce controllable, short chips in typical steel and cast-iron turning scenarios, reducing tool interference and improving surface finish. Controlled chip formation lowers the risk of rework and supports safer automated handling. Combined with the coated carbide construction, the insert helps achieve a reliable surface integrity while maintaining cutting-edge productivity. Clear material compatibility and practical application Designed for ISO groups P (steel) and K (cast iron), the insert performs across a broad range of carbon, alloy and grey or nodular cast irons. The coating and substrate pairing adapts to the thermal and abrasive demands of these materials, enabling both finishing passes and interrupted cuts where required. For customers with mixed batches, the insert offers flexibility while maintaining consistent dimensional results. Long-term value through process security and consistency Walter Tools’ development focus on stable cutting edges and good wear behaviour supports repeatable performance under production loads. The grade and geometry combination aims to reduce variability in tool life, which simplifies inventory management and machining planning. For procurement and workshop managers, that means clearer maintenance schedules and fewer emergency tool stops. Contact Metav Werkzeuge for tailored advice on integrating Walter Tools Tiger·tec Silver inserts into the workflow; technical consultations and detailed cutting data are available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: GX24-3E400N08-UF4-WKP23S-WALTER Label: Drehwendeschneidplatte GX24-3E400N08-UF4 WKP23S Walter Tools Type: Drehwendeschneidplatte (turning indexable insert) Series: Tiger·tec Silver Grade: WKP23S Chipbreaker: 3E400N08-UF4 Brand: Walter Tools Facts ISO designation: GX24-3E400N08-UF4 WKP23S Suitable material groups: P (steel), K (cast iron) Material (insert): coated carbide (beschichtetes Hartmetall) SKU: GX24-3E400N08-UF4-WKP23S-WALTER Special features Coating technology: Tiger·tec Silver Main applications: turning of steel and cast iron Geometry benefits: optimised chip control for short chips Typical advantages: improved process reliability, stable edge life FAQ What materials is this insert suitable for? The GX24-3E400N08-UF4 WKP23S insert is intended for ISO group P (steel) and K (cast iron), delivering stable performance on unalloyed and alloyed steels as well as common cast-iron grades. Is the insert coated and what does that mean for performance? Yes, the insert uses the Tiger·tec Silver coating technology; this coated carbide construction gives the WKP23S grade improved wear behaviour and thermal resistance compared with uncoated substrates. Which chipbreaker does the insert use and why is that important? The 3E400N08-UF4 chipbreaker geometry provides controlled short-chip formation, which enhances automated handling, reduces thread-up risk and supports a consistent surface finish. Can this insert be used for both finishing and roughing operations? The combination of geometry and the WKP23S coated grade allows the insert to be deployed in finishing and many common roughing situations on steel and cast iron, depending on cutting data and machine capability. Who supplies the original insert and how is brand authenticity assured? This turning indexable insert is a Walter Tools product; genuine items are supplied as factory-new originals and carry the manufacturer’s specifications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX24-3E400N08-UF4 WSM33S Wendeplatten - Walter Tools
Take advantage of the proven Tiger·tec Silver coating and the WSM33S grade for stable cutting edges when machining demanding materials; combine this with Walter Tools' long‑standing tool expertise for secure, repeatable turning operations — order directly via Metav Werkzeuge or consult our specialists for machining data. GX24-3E400N08-UF4 WSM33S turning insert – Tiger·tec Silver for rostfreier Stahl and superalloys by Walter Tools GX24-3E400N08-UF4 WSM33S is a versatile indexable turning insert designed for heavy-duty and difficult-to-machine materials, offering high thermal stability and consistent chip formation for industrial turning applications Tiger·tec Silver coating technology Grade WSM33S for high wear resistance Optimised chip control for demanding materials Suitable for rostfreier Stahl and superalloys Consistent performance for demanding materials The combination of the WSM33S grade and the Tiger·tec Silver coating provides a reproducible cutting behaviour that reduces tool change frequency and improves process stability. This grade is tailored to resist high temperatures and abrasive wear, which is especially relevant when working with rostfreier Stahl and heat‑resistant alloys. The result is a measurable increase in component consistency and fewer interruptions in production. Longer tool life through advanced coating technology The Tiger·tec Silver technology offers enhanced thermal resistance and adhesion, supporting a stable cutting edge during extended machining cycles. For manufacturers the benefit is clear: reduced tooling consumption and lower downtime. The insert’s coating helps to limit edge degradation under high thermal loads, translating into longer intervals between dressing or replacement and therefore improved overall equipment efficiency. Better chip control and safer machining With the specified chipbreaker 3E400N08‑UF4, the insert promotes controlled chip formation and evacuation, which minimises the risk of built-up edge and surface defects. Efficient chip control contributes both to operator safety and to surface integrity, yielding parts that require less rework. The geometry supports predictable chip flow when turning materials classified under ISO groups M and S, i.e. rostfreier Stahl, superalloys and titanium. Integration and process support for production environments As a standardised indexable turning solution, the insert fits common toolholders and facilitates quick index changes to maintain productivity. Technical data such as the ISO designation and chipbreaker allow straightforward tooling setup and parameter transfer into CNC routines. If machining parameters require optimisation, Metav Werkzeuge can provide cutting data and application recommendations to align the insert’s performance with specific cycle times and tolerances. Contact Metav Werkzeuge for tailored cutting data and application advice for the GX24-3E400N08-UF4 WSM33S turning insert by Walter Tools Technical Data SKU: GX24-3E400N08-UF4-WSM33S-WALTER Product type: Drehwendeschneidplatte (indexable turning insert) ISO designation: GX24-3E400N08-UF4 WSM33S Grade: WSM33S Series: Tiger·tec Silver Core specifications Chipbreaker: 3E400N08-UF4 Material groups: S / M Applicable material example: rostfreier Stahl Manufacturer: Walter Tools Features Coating technology: Tiger·tec Silver Designed for heat resistance and edge stability Optimised for controlled chip formation Suitable for machining superalloys and titanium FAQ What materials is this insert suitable for? The GX24-3E400N08-UF4 WSM33S insert is specified for materials in ISO groups M and S, in particular rostfreier Stahl, heat‑resistant superalloys and titanium. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating increases thermal resistance and adhesion, which prolongs tool life and maintains a stable cutting edge during high‑temperature turning. Which chipbreaker is fitted and what is its advantage? The insert features the 3E400N08‑UF4 chipbreaker, engineered for controlled chip formation and reliable evacuation, improving surface finish and process safety. Can this insert be used in standard toolholders? Yes, the GX24‑3E400N08‑UF4 design conforms to common indexable turning insert interfaces and allows rapid indexing to reduce downtime. Where to obtain cutting data for specific applications? Metav Werkzeuge can provide recommended cutting speeds, feeds and depths of cut for the GX24-3E400N08-UF4 WSM33S insert to suit individual machines and workpiece materials. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX24-3E400N20-RD4 WKP23S WKP23S Wendeplatten - Walter Tools
Take advantage of the combination of a wear-resistant Tiger·tec Silver coating, the WKP23S carbide grade and a precision 3E400N20-RD4 chipbreaker to keep turning processes consistent and productive. Order the insert directly via Metav Werkzeuge or consult our advisors for application-specific selection. GX24-3E400N20-RD4 WKP23S turning indexable insert — Tiger·tec Silver, for steel and cast iron GX24-3E400N20-RD4 WKP23S is a coated turning indexable insert designed for productive machining of steel (P) and cast iron (K) in industrial turning operations Tiger·tec Silver coating for high wear resistance Suited for steel (P) and cast iron (K) Precision 3E400N20-RD4 chipbreaker geometry Longer tool life through optimised coating and grade The combination of the Tiger·tec Silver coating with the WKP23S coated-carbide grade delivers improved wear resistance and consistent performance under thermal load. This engineered coating technology reduces flank and crater wear, which translates into longer tool life and fewer interruptions for insert changes. For turning operations where repeatability and uptime matter, the enhanced surface hardness and adhesive-wear protection help maintain dimensional stability across tool life. The insert’s construction supports predictable edge behaviour during medium- to high-duty turning of steels and grey irons. Stable chip formation and process security A defined chipbreaker specification — 3E400N20-RD4 — provides controlled chip formation and evacuation during continuous and interrupted cuts. Stable chips reduce the risk of workpiece surface damage and tool edge overload, improving process security and surface finish consistency. For production environments that prioritise throughput, the chip geometry is tuned to manage the heat and mechanical load typical of machining steel (P) and cast iron (K), assisting in maintaining constant cutting forces and minimising the need for excessive machine adjustments. Flexibility for mixed-production shops The insert’s design supports a range of turning tasks without frequent grade changes, offering versatility where batches include both steels and castings. As a coated indexable insert, it provides a practical balance between economy and performance: fewer insert changes and stable productivity. Selection of this insert suits applications that demand consistent surface quality and repeatable tool life across differing component geometries, making it a reliable choice for production turning in general engineering and subcontract manufacturing. For a tailored selection and to ensure the optimal insert geometry and grade for specific materials and machine conditions, contact Metav Werkzeuge for expert advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: GX24-3E400N20-RD4-WKP23S-WALTER Article: Drehwendeschneidplatte GX24-3E400N20-RD4 WKP23S Walter Tools Series: Tiger·tec Silver Grade: WKP23S Chipbreaker: 3E400N20-RD4 Material application: Steel (P), Cast iron (K) Facts Coating: Tiger·tec Silver Material of insert: Coated carbide Main application groups: P, K SKU code: GX24-3E400N20-RD4-WKP23S-WALTER Special features Designed for stable chip control Optimised for repeatable edge life Suitable for mixed production of steel and cast iron Coated for enhanced thermal and abrasive wear resistance FAQ What materials is this insert suitable for? The GX24-3E400N20-RD4 WKP23S turning insert is specified for machining steel (P) and cast iron (K) according to the grade and coating characteristics of the WKP23S Tiger·tec Silver variant. How does the Tiger·tec Silver coating benefit the insert? The Tiger·tec Silver coating on the WKP23S grade improves wear resistance and thermal stability, helping the insert maintain edge integrity and extend service life in demanding turning operations. What does the chipbreaker code 3E400N20-RD4 indicate? The 3E400N20-RD4 designation refers to the insert’s chipbreaker geometry, engineered to produce controlled chips and reliable evacuation during continuous and interrupted turning, enhancing process stability. Is this insert compatible with standard toolholders? The GX24-3E400N20-RD4 WKP23S insert is an indexable turning insert designed for compatible toolholders that accept the GX24 insert geometry and clamping system; check holder compatibility before ordering. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanation. There is no connection between our company and the named brands. The offered article is original, factory‑new goods of the manufacturer. The Walter Tools brand is cited where relevant.
GX24-3E400N20-RD4 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating, the WSM33S coated carbide grade and robust chip control for reliable machining of stainless steels and heat‑resistant alloys; these properties support a steady production flow with fewer tool changes. Order the indexable turning insert directly via Metav Werkzeuge or consult our specialists for application advice. GX24-3E400N20-RD4 WSM33S indexable turning insert — Tiger·tec Silver, suited for stainless steels and superalloys (Walter Tools) GX24-3E400N20-RD4 WSM33S is a coated indexable turning insert for demanding turning operations in heat‑resistant and corrosion‑resistant materials Tiger·tec Silver coating for improved wear resistance WSM33S coated carbide for stainless steels Also suited for heat‑resistant superalloys (S) Robust edge control for stable chip formation Improved tool life and process reliability through advanced coating The combination of the Tiger·tec Silver coating and the WSM33S grade provides enhanced resistance to thermal and abrasive wear, which translates into extended tool life and fewer interruptions on the shop floor. Coated carbide technology reduces flank wear and supports a stable cutting edge under elevated temperatures, making the insert especially suitable for machining stainless steels where adhesion and work‑hardening are common. The result is predictable performance and lower overall tooling consumption in continuous production runs. Consistent chip control and secure cutting edge for heavy machining The integrated chipbreaker designation 3E400N20‑RD4 promotes controlled chip formation and evacuation during medium to heavy turning cuts. Stable chip flow reduces rework and improves surface finish, while the insert geometry maintains edge integrity even when encountering sticky materials. This focus on chip formation and edge stability aids process security and reduces the likelihood of built‑up edge, which otherwise degrades component quality and necessitates unscheduled tool changes. Practical benefits for workshop efficiency and part quality Adopting this grade brings measurable operational advantages: fewer tool changes, predictable cycle times and consistent dimensional results. The insert’s suitability for both M (rostfreie Stähle) and S (heat‑resistant superalloys and titanium) ISO groups expands its application range, lowering inventory complexity for mixed‑material production. For technical clarification or to confirm the best geometry for a specific setup, Metav Werkzeuge consultants are available to advise on cutter choice, insert seatings and cutting parameters. Contact Metav Werkzeuge for an application consultation based on Walter Tools’ Tiger·tec Silver technology and the WSM33S grade — Metav Werkzeuge’s specialists will recommend the optimal insert geometry and cutting data for the production task at hand. Technical Data Article number: GX24-3E400N20-RD4-WSM33S-WALTER Description: Drehwendeschneidplatte GX24-3E400N20-RD4 WSM33S Walter Tools Product type: Indexable turning insert Series: Tiger·tec Silver Grade: WSM33S Chipbreaker: 3E400N20‑RD4 Facts No core numerical data provided in the source Special features Coating technology: Tiger·tec Silver Material of grade: coated carbide Applications: stainless steels (M), heat‑resistant superalloys and titanium (S) Designed for stable chip formation and reduced edge build‑up FAQ Is this insert suitable for machining stainless steel? Yes. The GX24‑3E400N20‑RD4 WSM33S insert is designed for stainless steels (ISO group M) and supports secure chip formation and reduced adhesion during turning. Can the insert handle heat‑resistant superalloys and titanium? The WSM33S grade and Tiger·tec Silver technology enable machining of S‑group materials; the insert’s thermal and edge stability suits these demanding alloys. What role does the chipbreaker 3E400N20‑RD4 play? The chipbreaker geometry promotes controlled chips and reliable evacuation, improving surface finish and reducing tool wear during heavier cuts. Is the grade suitable for high temperature cutting conditions? Yes. The coated carbide and Tiger·tec Silver system are engineered for better thermal resistance and wear control in elevated cutting temperatures. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. The mention of Walter Tools is for identification and explanatory purposes only; there is no affiliation between our company and the trademark holders. The offered item is an original, factory‑new product of the manufacturer.
GX24-3E400N20-RF7 WSM13S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating for improved thermal stability and the WSM13S grade for secure chip formation in demanding alloys; the result is longer tool life and stable machining of stainless and heat‑resistant materials. Order the insert directly via Metav Werkzeuge or request application advice from our consultants. GX24-3E400N20-RF7 WSM13S turning indexable insert — Tiger·tec Silver coating for stainless steel and superalloys | Walter Tools The GX24-3E400N20-RF7 WSM13S is a turning indexable insert designed to deliver stable cutting performance when machining stainless steels and heat‑resistant superalloys, combining a wear‑resistant grade with an optimised chipbreaker. Tiger·tec Silver coating for thermal stability Optimised 3E400N20‑RF7 chipbreaker geometry Suited to stainless steel and superalloys Consistent performance under thermal stress The combination of the Tiger·tec Silver coating and the WSM13S grade provides a machining solution that resists thermal degradation during prolonged contact with heat‑generating materials. This results in improved thermal stability and a more reliable cutting edge when working with materials that tend to work‑harden or generate high temperatures. For production environments, that stability translates into fewer tool changes and more consistent cycle times, supporting process reliability and productivity. Reliable chip control and surface results An optimised chipbreaker geometry—identified as 3E400N20‑RF7—supports controlled chip formation and evacuation, which reduces the risk of built‑up edge and protects the workpiece surface. The insert’s geometry is tuned for demanding chip shapes typical of stainless steels and superalloys, helping to maintain a consistent surface finish and reducing secondary operations. Clear chip control also minimises the chance of machine downtime caused by chip jamming. Application guidance for demanding materials This grade targets ISO groups M (stainless steels) and S (heat‑resistant superalloys and titanium); the substrate is a coated carbide designed for heavy engagement with materials that are difficult to machine. When selecting cutting parameters, prioritise conservative feeds and speeds at start‑up and increase progressively while monitoring cutting temperature and tool wear. The insert’s design supports both interrupted and continuous cutting, depending on the chosen insert geometry and holder setup. Operational benefits and suitability Choosing this insert means prioritising process security and predictable tool life in challenging turning applications. The coated carbide substrate offers a balance between hardness and toughness to resist chipping, while the coating enhances wear resistance at elevated temperatures. For manufacturers aiming to reduce rework and maintain stable output when machining corrosive or heat‑resistant alloys, this insert delivers a robust baseline for productive, repeatable results. Contact Metav Werkzeuge for tailored machining parameters and to order Walter Tools Tiger·tec Silver inserts — our technical consultants will assist with selection and optimisation for the intended application. Technical Data SKU: GX24-3E400N20-RF7-WSM13S-WALTER Article designation: GX24-3E400N20-RF7 WSM13S Product type: Drehwendeschneidplatte (turning indexable insert) Manufacturer: Walter Tools Facts Grade: WSM13S Series: Tiger·tec Silver Chipbreaker: 3E400N20‑RF7 Applicable ISO groups: S, M Special features Coating technology: Tiger·tec Silver Substrate: coated carbide (beschichtetes Hartmetall) Suitable for: stainless steels, heat‑resistant superalloys and titanium Intended application: machining of hard‑to‑cut materials with optimised chip control FAQ Which materials is this insert suitable for? The GX24-3E400N20-RF7 WSM13S insert from Walter Tools is engineered for stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), providing thermal stability and controlled chip formation. What coating and grade are specified on the insert? The insert uses the Tiger·tec Silver coating combined with the WSM13S grade, a coated carbide designed for enhanced wear resistance at elevated temperatures. How does the 3E400N20‑RF7 chipbreaker improve machining? The 3E400N20‑RF7 geometry is optimised for consistent chip formation and evacuation in demanding alloys, reducing built‑up edge and supporting superior surface finishes. Is this insert suitable for interrupted cuts and high engagement machining? Yes. The coated carbide substrate and robust grade offer the toughness needed for interrupted cuts and heavy engagement, while the coating aids edge stability under heat‑intensive conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no association between our company and the named brands. The offered article is original factory‑new goods of the manufacturer Walter Tools.
GX24-3E400N20-RF7 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger‑tec Silver coating and the WSM23S grade for stable chip control and extended tool life; the result is productive, predictable turning of demanding materials. Order the GX24-3E400N20-RF7 WSM23S indexable turning insert directly via Metav Werkzeuge or ask our consultants if needed. GX24-3E400N20-RF7 WSM23S indexable turning insert — Tiger‑tec Silver, for rostfreier Stahl and superalloys (Walter Tools) The GX24-3E400N20-RF7 WSM23S is an indexable turning insert designed for demanding external turning operations, optimised for machining rostfreier Stahl and heat‑resistant superalloys using the Tiger‑tec Silver coated grade. Tiger‑tec Silver coated carbide Optimised for rostfreier Stahl and superalloys Stable chip formation and edge life Walter Tools precision and consistency Boosted productivity through modern coating technology The combination of the Tiger‑tec Silver coating and the WSM23S coated carbide grade delivers a measurable increase in process reliability. The coating reduces friction at the tool–workpiece interface, lowering cutting temperatures and enabling higher cutting parameters without sacrificing edge stability. For manufacturing environments where throughput and repeatability matter, this results in fewer tool changes and more consistent cycle times. The insert’s geometry, indicated by the 3E400N20‑RF7 designation, supports controlled chip flow and reduces the risk of built‑up edge during prolonged cuts. Reliable performance on rostfreier Stahl and heat‑resistant alloys The grade is formulated specifically for materials classified under ISO group M (rostfreie Stähle) and S (superalloys and titanium), which are known for toughness and poor thermal conductivity. WSM23S promotes secure chip formation and a durable cutting edge, so turning operations produce a stable surface finish and predictable wear behaviour. In plain terms, the coated carbide helps to manage heat and strain at the cutting zone: this protects the cutting edge, minimises interruptions for regrinding, and supports higher part quality on components made from rostfreier Stahl or nickel‑base alloys. Practical workshop advantages and handling tips The indexable design simplifies tool handling and inventory management: worn inserts are replaced quickly without regrinding, reducing machine downtime. The GX24‑ geometry is suitable for a range of cutting strategies; for heavy interrupted cuts choose a robust insert seat and moderate speeds, while continuous cuts benefit from increased speed and optimised feed. When selecting holder and clamping, ensure correct seat support to preserve the coated cutting edge; this maximises life expectancy and maintains the stable chip formation the grade provides. The combination of predictable wear and easy replacement supports efficient production planning. For application advice, grade selection or to request supply options contact Metav Werkzeuge for tailored recommendations and availability. Technical Data Article number: GX24-3E400N20-RF7-WSM23S-WALTER Designation: GX24-3E400N20-RF7 WSM23S Manufacturer: Walter Tools Product type: indexable turning insert Series: Tiger‑tec Silver Facts Applicable material groups: M (rostfreier Stahl), S (superalloys/titanium) Grade: WSM23S Geometry/land: 3E400N20‑RF7 Material family: coated carbide Special features Coating: Tiger‑tec Silver Material compatibility: rostfreier Stahl, heat‑resistant superalloys Optimised chipformer design Stable cutting edge and long tool life FAQ What materials is this insert suitable for? The GX24‑3E400N20‑RF7 WSM23S insert is tailored for rostfreier Stahl and heat‑resistant superalloys, supporting stable chip control and consistent edge life. How does Tiger‑tec Silver benefit machining? The Tiger‑tec Silver coating on the WSM23S grade reduces friction and thermal load, enabling higher parameters and improved process reliability with the Walter Tools insert. Can the insert be used for interrupted cuts? Yes, the insert’s geometry and reinforced edge form are suitable for interrupted cuts when paired with appropriate holder support and conservative cutting speeds. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original factory‑new product of the manufacturer.
GX24-3E400N20-RF8 WSM13S WSM13S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Silver coating and WSM13S grade for enhanced heat resistance and a stable cutting edge when machining rostfreier Stahl and superalloys; order directly via Metav Werkzeuge or consult our technical team for application-specific advice. GX24-3E400N20-RF8 WSM13S — Indexable turning insert, Tiger·tec Silver coating, Walter Tools The GX24-3E400N20-RF8 WSM13S is an indexable turning insert engineered for reliable chip control and long tool life in demanding turning operations, particularly when machining rostfreier Stahl and heat‑resistant superalloys. Tiger·tec Silver coating for heat resistance WSM13S grade for stable cutting edges Optimised chip control for rostfreier Stahl Suitable for superalloys and titanium alloys Consistent performance through advanced coating technology Thanks to the Tiger·tec Silver technology and the WSM13S coated carbide, this insert offers improved heat resistance and wear protection during continuous turning. The specialised coating reduces thermal load at the cutting edge, which translates into more stable machining and longer run times. For operations on rostfreier Stahl and similar materials, the coating helps prevent rapid edge degradation and supports predictable tool life, reducing downtime and reinstating process reliability. Precise chip control that protects surface finish The insert geometry identified by 3E400N20-RF8 delivers controlled chip formation and evacuation, which reduces the risk of built‑up edge and improves surface consistency. Optimised chip control is particularly important with rostfreier Stahl, where material adhesion and heat generation can compromise finish quality. By stabilising chip flow, the insert lowers the likelihood of rework and supports consistent component tolerances in serial production. Robust edge stability for tough materials Designed for the S and M material groups, the grade performs well with heat‑resistant superalloys, titanium and rostfreier Stahl. The stable cutting edge characteristic of this grade enables secure machining of materials that tend to work‑harden or produce tenacious chips. In practice, that means fewer interrupted cuts, less scrap and a more predictable production rhythm when processing demanding workpiece alloys. Productivity through predictable tool behaviour When integrated into a well‑matched toolholder and process, this indexable insert contributes to higher process security and reproducible results. The combination of geometry and grade is aimed at reducing unexpected tool changes and keeping cycle times steady. For businesses seeking efficiency gains, the insert supports longer operation stretches and helps maintain component quality across batches, making it a practical choice for industrial turning lines. Contact Metav Werkzeuge to discuss how the Walter Tools Tiger·tec Silver insert can be applied to specific rostfreier Stahl or superalloy jobs — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: GX24-3E400N20-RF8-WSM13S-WALTER Name: Drehwendeschneidplatte GX24-3E400N20-RF8 WSM13S Walter Tools Manufacturer: Walter Tools Range: Tiger‑tec Silver Measurements & designations Grade: WSM13S Geometry / chipbreaker: 3E400N20-RF8 Material group: S / M ISO designation: GX24-3E400N20-RF8 WSM13S Applications & features For rostfreier Stahl Suitable for superalloys and titanium Coated carbide, Tiger·tec Silver technology Stable cutting edge and optimised chip formation FAQ What materials is this insert suitable for? The GX24-3E400N20-RF8 WSM13S insert is intended for rostfreier Stahl and S‑group materials such as heat‑resistant superalloys and titanium, offering reliable performance in challenging turning operations. How does the Tiger·tec Silver coating improve tool life? The Tiger·tec Silver coating on the WSM13S grade increases thermal resistance and wear protection, which helps maintain the cutting edge under high temperatures and prolongs the interval between indexings. Which chipbreaker is integrated and what is its benefit? The 3E400N20-RF8 chipbreaker geometry is designed for controlled chip formation and evacuation, improving surface finish and reducing the risk of built‑up edge when machining rostfreier Stahl. Is this insert suitable for continuous production runs? Yes, the combination of coated carbide and robust geometry provides stable cutting behaviour and predictable tool life, making it suitable for continuous and series production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original factory‑new goods of the manufacturer.
GX24-3E400N20-RF8 WSM23S WSM23S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, stable chip control and targeted material coverage to maintain productive turning operations. Benefit from the Tiger‑tec Silver coating and the WSM23S grade for challenging materials, and contact Metav Werkzeuge for application advice or ordering. GX24-3E400N20-RF8 WSM23S turning insert — Tiger‑tec Silver coating by Walter Tools GX24-3E400N20-RF8 WSM23S is a coated carbide turning insert designed for heavy-duty machining of stainless steels and superalloys, offering robust edge stability and optimised chip control Tiger‑tec Silver coated carbide Optimised 3E400N20-RF8 chipbreaker Designed for stainless steels and superalloys Walter Tools manufacturing quality Reliable performance for difficult-to-machine materials The combination of the Tiger‑tec Silver coating and the WSM23S grade provides enhanced wear resistance and thermal stability when machining stainless steels and superalloys. This indexable insert is formulated as a coated carbide to resist edge degradation under high temperatures and abrasive conditions. The result is fewer interruptions for insert changes and more consistent dimensional accuracy over longer tool life, which directly improves process efficiency and reduces downtime. Consistent chip control and cutting-edge stability The integrated 3E400N20-RF8 chipbreaker geometry promotes controlled chip formation and evacuation, reducing the risk of built-up edge and unstable cutting conditions. Stable chip control contributes to predictable surface finish and repeatable tolerances in serial production. By prioritising cutting-edge stability, the insert supports higher feeds and reliable cycle times, making it suitable for productive turning processes where material behaviour can otherwise compromise throughput. Practical selection and application benefits for workshop use Choosing the correct insert grade streamlines tool management in mixed-production environments. The WSM23S variety is particularly suited to workpieces that demand heat resistance and stable cutting edges, such as components from titanium or nickel-based alloys and austenitic stainless steels. Where roughing and medium finishing intersect, the insert’s coating and chipbreaker combination help balance tool life and surface quality. For application-specific guidance, technical advisors can recommend suitable cutting data and clamping options to match machine capabilities and workpiece geometry. Contact Metav Werkzeuge for tailored machining recommendations on Walter Tools inserts and to arrange a customised supply solution — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: GX24-3E400N20-RF8-WSM23S-WALTER Designation: GX24-3E400N20-RF8 WSM23S Series: Tiger‑tec Silver Grade: WSM23S Chipbreaker: 3E400N20-RF8 Manufacturer: Walter Tools Facts Applicable material groups: S / M Suitable for: stainless steels (M) Suitable for: superalloys and titanium (S) Special features Coated carbide grade Designed for heavy-duty machining Optimised chip control geometry Enhanced thermal and wear resistance FAQ What materials can this insert machine effectively? This GX24-3E400N20-RF8 WSM23S turning insert is suitable for stainless steels (M) and for superalloys/titanium (S), offering heat and wear resistance for demanding cuts How does the Tiger‑tec Silver coating benefit performance? The Tiger‑tec Silver coating improves thermal resistance and wear protection, extending insert life and maintaining cutting-edge stability during extended cutting operations Which chipbreaker should be chosen for mixed roughing and finishing? The 3E400N20-RF8 chipbreaker is engineered for controlled chip formation across roughing and medium finishing applications, balancing chip control and surface quality Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for clarification purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer Walter Tools.
GX24-3E500N02-UF8 WSM23S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WSM23S grade for reliable machining of stainless steels and heat-resistant alloys; the optimised chipbreaker delivers stable chip formation and consistent edge life, supporting productive turning operations — order directly via Metav Werkzeuge or contact our advisors for application support. GX24-3E500N02-UF8 WSM23S indexable turning insert by Walter Tools — Tiger·tec Silver, chipbreaker 3E500N02-UF8 The GX24-3E500N02-UF8 WSM23S is a coated indexable turning insert designed for demanding machining of stainless steels and heat-resistant superalloys, offering a balance of thermal resistance and cutting-edge stability. Tiger·tec Silver coating for high heat resistance WSM23S grade for stainless and superalloys Precise chipbreaker 3E500N02-UF8 for chip control Indexable turning insert for productive turning Robust grade and coating for long tool life The combination of WSM23S and Tiger·tec Silver coating provides enhanced thermal stability and wear resistance compared with uncoated grades. This coated carbide formulation is engineered to reduce adhesion and flank wear when machining materials classified as group M (rostfreie Stähle) and group S (heat‑resistant superalloys and titanium). In practice, the result is a more predictable tool life and fewer unscheduled tool changes, which supports steady production flow and lowers per‑component machining costs. For operators unfamiliar with coating technologies: a coated insert adds a thin, hard layer to the substrate to improve heat and wear performance without altering basic insert geometry. Controlled chips and reliable cutting performance The integrated chipbreaker 3E500N02-UF8 is optimised to shape and evacuate chips consistently, reducing the risk of built-up edge and surface damage. Stable chip control improves surface finish and reduces secondary operations, while consistent cutting forces help maintain process stability on CNC lathes. The insert’s geometry works in concert with the coating and grade to maintain a sharp, durable cutting edge during interrupted cuts and heavy engagement typical for tougher stainless and nickel‑based alloys. These features contribute directly to higher throughput and reproducible component quality. Practical application guidance for production environments This indexable insert is suitable for a variety of turning strategies where process security and productivity matter most. It integrates with standard negative‑geometry toolholders compatible with the GX24 family designation; selection of appropriate cutting data (speed, feed and depth) depends on the machine rigidity and workpiece batch sizes. When machining group M materials, reduce cutting speeds compared with mild steel and ensure reliable coolant or lubrication to manage heat. The insert supports machining strategies that prioritise surface integrity and repeatable results, making it a practical choice for job shops and production lines handling corrosion‑resistant and high‑temperature alloys. Contact Metav Werkzeuge to discuss how the Walter Tools GX24-3E500N02-UF8 WSM23S insert can be integrated into the production process or to request cutting data tailored to specific materials and machines. Technical data Article number / SKU: GX24-3E500N02-UF8-WSM23S-WALTER Description: Drehwendeschneidplatte / indexable turning insert Brand: Walter Tools Series: Tiger·tec Silver Core specifications Grade: WSM23S Chipbreaker: 3E500N02-UF8 Material group: S / M ISO designation: GX24-3E500N02-UF8 WSM23S Special features Coating: Tiger·tec Silver (coated carbide) Suitable for: stainless steels (M) and superalloys/titanium (S) Product type: indexable turning insert UID: GX24-3E500N02-UF8-WSM23S-WALTER FAQ What materials is this insert suited for? The GX24-3E500N02-UF8 WSM23S insert is designed primarily for stainless steels (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), where thermal resistance and edge stability are required. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating increases thermal stability and reduces adhesive wear, extending edge life during prolonged cutting of tough, heat‑generating materials. Which chipbreaker does this insert use and why is it important? This insert features the 3E500N02-UF8 chipbreaker, engineered for consistent chip formation and evacuation to protect the cutting edge and improve surface finish. Is the insert compatible with standard GX24 toolholders? The ISO designation aligns with the GX24 family; compatibility should be confirmed against the holder catalogue and clamping specifications for safe, secure mounting. Can this insert be used for heavy roughing operations? Yes — the WSM23S grade and reinforced coating are developed to withstand higher thermal and mechanical loads common in heavy material removal, provided machine and clamping rigidity are adequate. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group and is a worldwide provider of precision tools for metalworking. Protected trademarks and product names belong to their respective owners. Mention of brand names is for explanatory purposes only; the offered item is an original, factory‑new product from the manufacturer.
GX24-3E500N03-CE4 WKP23S WKP23S Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating and the WKP23S grade provides extended tool life and stable chip control, improving uptime and process reliability; order directly via Metav Werkzeuge or consult our experts for application-specific recommendations. GX24-3E500N03-CE4 WKP23S indexable turning insert — Tiger·tec Silver for steel and cast iron | Walter Tools The GX24-3E500N03-CE4 WKP23S is an indexable turning insert from the Tiger·tec Silver series, designed for productive turning of steel (P) and cast iron (K) with optimised chip control. Tiger·tec Silver coating for long tool life WKP23S grade optimised for steel and cast iron Stable chip formation under varied cutting conditions Consistent edge integrity for productive turning Increase process reliability through advanced coating technology The Tiger·tec Silver surface treatment delivers improved wear resistance and thermal stability compared with conventional coatings, which directly benefits cycle times and tool change intervals. By combining a coated carbide substrate with an engineered surface layer, the insert maintains a sharper cutting edge under the heat and abrasion typical when machining steels and cast irons. This results in fewer interruptions for tool replacement and a steadier production flow. Predictable chip control for safer, cleaner machining Equipped with the 3E500N03-CE4 chipbreaker geometry, the insert ensures controlled chip formation during turning operations in both P and K material groups. Controlled chips reduce the risk of workpiece damage and machine downtime, while simplifying chip handling and disposal. The geometry is optimised for the typical breakage behaviour of steel and the abrasive, short chips from cast iron, improving overall productivity and operator safety. Robust edge stability for consistent surface finishes The WKP23S carbide grade is formulated to balance toughness and hardness, delivering edge stability that supports repeatable surface quality. In practical terms, this means fewer reworks and a higher first-pass yield when producing turned components. The combination of grade and coating helps absorb transient loads and resists abrasive wear, which is particularly advantageous for longer tool life in continuous production runs. Practical fit into workshop toolchains The insert’s ISO designation and standard geometry make it straightforward to integrate into existing toolholders and machining cycles. Its suitability for unalloyed and alloyed steels as well as cast iron allows one insert type to cover multiple applications, simplifying inventory and reducing tool management complexity. The result is a pragmatic balance between flexibility and process optimisation that supports efficient shop-floor logistics. For application advice tailored to specific machines or materials, contact Metav Werkzeuge for expert recommendations and ordering: info@metav-werkzeuge.com | +49 2822 7131930 — Metav Werkzeuge will assist in selecting the optimal insert and geometry for the intended turning task. Technical data Article number: GX24-3E500N03-CE4-WKP23S-WALTER SKU: GX24-3E500N03-CE4-WKP23S-WALTER Product type: Indexable turning insert Grade/Sort: WKP23S Series: Tiger·tec Silver Chipbreaker: 3E500N03-CE4 Manufacturer: Walter Tools Facts Material groups: P (steel), K (cast iron) Coating type: Tiger·tec Silver (coated carbide) Geometry designation: GX24-3E500N03-CE4 WKP23S Intended use: Turning operations Special features Optimised for stable chip formation Balanced toughness and wear resistance Suitable for a wide range of steels and cast irons Designed for productive, repeatable performance FAQ What materials is this insert suitable for? The GX24-3E500N03-CE4 WKP23S insert from Walter Tools is suitable for steel (P) and cast iron (K) according to the ISO material groups described for the grade. How does the 3E500N03-CE4 chipbreaker improve machining? The 3E500N03-CE4 chipbreaker is shaped to promote controlled chip breakage, improving chip evacuation and reducing the likelihood of entanglement during turning with this Walter Tools insert. Can this insert be used for roughing and finishing operations? The WKP23S grade and Tiger·tec Silver coating provide a balance of toughness and wear resistance that supports both productive roughing and consistent finishing, depending on the chosen cutting parameters. Is the insert compatible with standard indexable turning toolholders? The ISO-style designation and standard geometry of the GX24-3E500N03-CE4 make it compatible with commonly used toolholder systems for indexable turning inserts. What performance benefits can be expected compared with an uncoated carbide insert? Compared with uncoated carbide, the coated Tiger·tec Silver grade typically shows enhanced wear resistance and thermal stability, leading to longer tool life and more consistent surface quality in serial turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only; there is no affiliation between Metav Werkzeuge and the named brands. The offered article is an original, factory-new product of the manufacturer.
GX24-3E500N04-GD3 WKP23S Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Silver coating and the WKP23S grade for extended tool life when machining steel and cast iron; the 3E500N04‑GD3 chipbreaker delivers stable chip formation and consistent surface quality. Order the GX24‑3E500N04‑GD3 WKP23S inserts directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. GX24-3E500N04-GD3 WKP23S Turning insert — Tiger‑tec Silver for steel and cast iron | Walter Tools The GX24-3E500N04-GD3 WKP23S turning insert is a productivity‑focused indexable insert engineered for reliable machining of steel and cast iron with optimised chip control. Tiger‑tec Silver coating for extended tool life WKP23S grade optimised for steel and cast iron 3E500N04‑GD3 chipbreaker for reliable chip control Stable cutting edge for consistent surface finish Productivity gains for turning of steel and cast iron The Tiger‑tec Silver‑based grade is formulated to balance wear resistance and toughness for demanding turning operations on steel and cast iron. As an indexable insert, this geometry is designed to keep cycle times low by enabling predictable tool life and repeatable regrinds where applicable. The main advantage is fewer tool changes and less unplanned downtime, which translates into higher machine utilisation and stable production output. Controlled chips and improved surface finish The integrated 3E500N04‑GD3 chipbreaker promotes short, easy‑to‑evacuate chips that reduce the risk of tangling and allow higher feed rates in many applications. Short chips improve process security and support better coolant access at the cutting zone, which in turn helps to achieve a more consistent surface finish and maintain the integrity of the cutting edge over longer runs. Coating and grade characteristics explained The WKP23S grade from the Tiger‑tec Silver family is a coated carbide grade optimised for the heat generation and chip behaviour typical of ISO P (steel) and ISO K (cast iron) materials. The coating technology enhances resistance to abrasive and adhesive wear while preserving edge stability. For less experienced users: a coated carbide grade combines a hard substrate and a thin protective layer so the insert resists high temperatures and abrasive conditions better than uncoated alternatives. Process benefits and application notes In practical terms, this turning geometry and grade are suitable for a range of operations where predictable performance is required—finishing and medium‑duty roughing on unalloyed and alloyed steel, as well as on cast iron components. The insert supports stable chip formation and consistent dimension control, making it a solid choice for batch production and jobbing environments where repeatability is essential. For reliable high‑productivity turning with Walter Tools' Tiger‑tec Silver, contact Metav Werkzeuge for tailored recommendations and fast supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: GX24-3E500N04-GD3-WKP23S-WALTER SKU: GX24-3E500N04-GD3-WKP23S-WALTER Product type: Turning insert Brand: Walter Tools Core data Insert designation: GX24-3E500N04-GD3 WKP23S Series: Tiger‑tec Silver Chipbreaker: 3E500N04‑GD3 Material suitability: ISO P (steel), ISO K (cast iron) Special features Coating/grade: Tiger‑tec Silver, WKP23S Material composition: P / K Application: Turning of steel and cast iron Manufacturer: Walter Tools FAQ What materials can this insert machine effectively? The GX24‑3E500N04‑GD3 WKP23S insert is specified for ISO P (steel) and ISO K (cast iron) applications and performs well across typical unalloyed and alloyed steels as well as various cast iron grades. How does the Tiger‑tec Silver coating benefit tool life? Tiger‑tec Silver enhances wear resistance and thermal stability, so the WKP23S grade maintains a stable cutting edge longer under the heat and abrasion conditions common in steel and cast iron turning. What is the function of the 3E500N04‑GD3 chipbreaker? The 3E500N04‑GD3 chipbreaker produces short, controllable chips that improve evacuation, reduce tangling risk, and support higher feed rates while aiding surface quality consistency. Is this insert suitable for finishing operations? Yes, the geometry and WKP23S grade are suitable for finishing and medium‑duty turning where good surface finish and dimensional stability are required. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are used for explanation purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
GX24-3E500N04-GD3 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating performance and WSM33S grade stability for reliable machining of high‑alloy and heat‑resistant materials; order directly via Metav Werkzeuge or consult our specialists for application advice. GX24-3E500N04-GD3 WSM33S — turning indexable insert, Tiger‑tec Silver (Walter Tools) A GX24-3E500N04-GD3 WSM33S turning indexable insert engineered for high‑temperature cutting of rostfreier Stahl and heat‑resistant superalloys, optimised for secure chip formation and edge life Tiger‑tec Silver coating technology WSM33S grade for hard‑to‑cut materials Stable chip control with 3E500N04 geometry Suitable for rostfreier Stahl and superalloys High‑performance machining for demanding materials The insert combines a coated carbide substrate with the Tiger‑tec Silver coating, delivering a controlled balance of wear resistance and thermal stability. This design supports sustained machining of rostfreier Stahl and heat‑resistant superalloys, where heat generation and material toughness typically reduce tool life. The result is a measurable improvement in process reliability and fewer unplanned tool changes, translated into steadier component quality and higher throughput. Predictable chip formation and edge stability Thanks to the specified geometry 3E500N04-GD3 and the WSM33S grade, the insert promotes consistent chip breaking and reduced edge build‑up. The engineered chipformer supports stable cutting forces and helps avoid thermal spikes at the cutting zone; this lowers the risk of surface damage on the workpiece. For production environments that demand repeatable results, the combination of geometry and coating reduces scrap rates and improves first‑pass quality. Practical integration and productivity benefits The insert is designed for straightforward integration into standard turning toolholders where the ISO geometry fits the required seat; compatibility supports quick index changes and minimal machine downtime. As a coated indexable solution, it is optimised for a wide range of high‑temperature alloys and offers the process advantages expected from a premium grade: longer interval between tool changes, reliable edge life and consistent surface finish. This makes the component a pragmatic choice for shops focused on efficiency and predictable output. For process‑critical applications choose the Walter Tools Tiger‑tec Silver insert and contact Metav Werkzeuge for tailored machining recommendations at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: GX24-3E500N04-GD3-WSM33S-WALTER Product: Drehwendeschneidplatte / turning indexable insert Designation: GX24-3E500N04-GD3 WSM33S Series: Tiger‑tec Silver Grade: WSM33S Manufacturer: Walter Tools Material group: S / M Facts Geometry code: 3E500N04-GD3 SKU: GX24-3E500N04-GD3-WSM33S-WALTER Material classification: S (superalloys), M (rostfreier Stahl) Special features Coated carbide (beschichtetes Hartmetall) Tiger·tec Silver coating technology Optimised chipformer for consistent chip breaking Designed for heavy‑duty, heat‑resistant materials Stable cutting edge and improved wear resistance FAQ What materials is this insert best suited for? The GX24-3E500N04-GD3 WSM33S insert is suited for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), reflecting the grade’s thermal and edge‑stability focus. How does the Tiger‑tec Silver coating improve performance? Tiger‑tec Silver enhances thermal resistance and wear behaviour on the WSM33S grade, enabling longer tool life and more consistent cutting when machining tough alloys. Is the geometry suitable for standard turning holders? Yes, the GX24‑3E500N04‑GD3 geometry corresponds to common ISO indexable insert interfaces and allows quick index changes with compatible toolholders. Can this insert reduce scrap and rework? By promoting stable chip formation and maintaining a reliable cutting edge, the insert helps reduce surface defects and the need for rework in production runs. What distinguishes WSM33S from general‑purpose grades? WSM33S is a specialised coated carbide grade developed for heavy, heat‑generating materials; it emphasises edge stability and controlled wear rather than universal application. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanation only; there is no affiliation between Metav Werkzeuge and the listed brands. The offered item is original, factory‑new merchandise of the manufacturer.
GX24-3E500N04-GD6 WSM23S WSM23S Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Silver coating and the WSM23S grade delivers stable cutting edges and reliable chip control in the machining of stainless steels and heat-resistant superalloys; order inserts from Metav Werkzeuge or request application advice from the consultants for optimised process security. GX24-3E500N04-GD6 WSM23S indexable turning insert by Walter Tools — for stainless steels and superalloys GX24-3E500N04-GD6 WSM23S is a coated carbide turning insert designed for demanding turning operations in materials that challenge conventional grades, providing improved wear resistance and edge stability for heavy-duty applications. Tiger·tec Silver coating for extended tool life WSM23S grade for stainless and superalloys Stable cutting edge for heavy-duty turning Optimised chip control with 3E500N04-GD6 geometry Maximise throughput when machining difficult materials The combination of the Tiger·tec Silver coating and the WSM23S cutting grade is engineered to maintain a stable cutting edge under thermal and mechanical stress, which supports consistent cycle times and fewer tool changes. This performance advantage results from a hard, wear-resistant coating that reduces flank wear and a substrate tuned for toughness. For shops working with stainless steels and high-temperature alloys, the result is a more predictable machining process and a reduction in unplanned stoppages, translating directly into higher productivity. Achieve reliable chip control and surface quality The insert’s 3E500N04-GD6 chipbreaker geometry is optimised to produce controlled chips even when turning materials prone to long, stringy swarf. Controlled chip formation lowers the risk of surface damage and tool interference, helping to preserve component finish and dimensional accuracy. The geometry works in concert with the coated carbide grade to moderate cutting forces and dissipate heat, which supports improved surface integrity and repeatable part quality in series production. Reduce operating costs through longer tool life and process security A grade tailored for tough-to-machine alloys offers lower overall tooling consumption by extending the interval between regrinds or replacements. The WSM23S grade focuses on a balance of toughness and wear resistance, enabling safe machining of both stainless steels and heat-resistant superalloys with fewer tool failures. Enhanced tool life and consistent edge retention contribute to predictable tool budgets and simplified tool management in production environments, supporting efficient planning and less downtime. For robust performance in stainless steels and superalloys, choose Walter Tools Tiger·tec Silver inserts and contact Metav Werkzeuge for technical guidance and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: GX24-3E500N04-GD6-WSM23S-WALTER Article: GX24-3E500N04-GD6 WSM23S Type: Indexable turning insert Manufacturer: Walter Tools Core data Series: Tiger·tec Silver Grade: WSM23S Chipbreaker: 3E500N04-GD6 Material groups: S / M Special features Coating: Tiger·tec Silver (coated carbide) Suitability: stainless steels (M) and heat-resistant superalloys/titanium (S) Application: heavy-duty and difficult-to-machine turning Geometry: optimised for chip control and edge stability FAQ What materials is this insert suitable for? The GX24-3E500N04-GD6 WSM23S insert from Walter Tools is suitable for stainless steels (M) and heat-resistant superalloys and titanium (S), offering a grade designed for high thermal and mechanical loads. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the insert increases wear resistance and improves heat management, which extends tool life and maintains a stable cutting edge during prolonged or high-stress turning operations. Which chipbreaker is fitted to this insert and what is its advantage? The 3E500N04-GD6 chipbreaker is tailored for controlled chip formation in challenging materials, reducing the risk of surface damage and supporting improved process reliability. Is this insert intended for finishing or heavy roughing? The WSM23S grade and the insert geometry are optimised for heavy-duty and difficult-to-machine applications, providing edge stability that supports both aggressive cutting and reliable subsequent finishing passes. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX24-3E500N04-GD6 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM33S grade for reliable machining of stainless steels and heat‑resistant superalloys; the insert provides stable chip formation and high wear resistance for continuous production. Order the GX24‑3E500N04‑GD6 WSM33S directly via Metav Werkzeuge or consult our specialists for application optimisation. GX24-3E500N04-GD6 WSM33S indexable turning insert — Tiger·tec Silver grade by Walter Tools The GX24-3E500N04-GD6 WSM33S is an indexable turning insert developed for heavy‑duty turning of stainless steels and heat‑resistant superalloys, offering a robust chipformer and a coated carbide grade optimised for thermal and mechanical load. *Tiger·tec Silver coating technology *Optimised chipformer 3E500N04-GD6 *Reliable performance on stainless steels *High wear resistance for tough alloys Maximise uptime with a grade built for difficult materials The WSM33S grade, part of the Tiger·tec Silver family, is engineered to deliver consistent tool life and reproducible results when machining materials that generate heat and tend to form built‑up edge. The combination of a thermally resilient coating and a stable substrate reduces flank wear and supports secure chip formation, which in turn minimises unscheduled tool changes. This focus on process stability translates into measurable productivity gains in batch and continuous turning operations. Coating and geometry: why the chipformer matters A precisely designed chipformer 3E500N04‑GD6 controls chip flow and breakage even under high cutting temperatures typical for superalloys and stainless steels. The coated carbide construction provides a balance between toughness and hardness, ensuring the cutting edge resists chipping while maintaining wear resistance. For production planners and process engineers, this means fewer interruptions, predictable tool life and sharper control over surface finish and dimensional repeatability. Practical benefits in the workshop and on the shop floor Using a grade tailored for M and S material groups reduces common turning issues such as built‑up edge and thermal softening. The insert’s geometry and coating combination help to lower cutting forces and improve heat management; these aspects contribute directly to lower cycle times and improved workpiece quality. For jobs that demand repeatability and consistent surface integrity, this insert offers an efficient approach without compromising edge stability. Application guidance and selection advice The insert suits operations on stainless steels and heat‑resistant superalloys, including certain titanium applications where edge stability and thermal resistance are paramount. When integrating this insert into a machining process, choose cutting parameters that favour coolant access and moderate feed rates to exploit the grade’s wear resistance. Process documentation and trial cuts are recommended to define the optimal balance between speed, feed and depth of cut for each component batch. Contact Metav Werkzeuge for tailored cutting data and application support on Walter Tools Tiger·tec Silver inserts to secure reliable production performance Technical data Article number: GX24-3E500N04-GD6-WSM33S-WALTER Designation: GX24-3E500N04-GD6 WSM33S Type: Indexable turning insert Brand: Walter Tools Facts Grade: WSM33S Series: Tiger·tec Silver Chipformer: 3E500N04-GD6 Material groups: M, S Special features Coated carbide grade Optimised chip control geometry Suited for stainless steels and superalloys Designed for stability and wear resistance FAQ What materials can this insert machine effectively? The GX24‑3E500N04‑GD6 WSM33S is designed for machining stainless steels (M) and heat‑resistant superalloys and titanium (S), offering reliable chip control and thermal resistance for these groups. How does the Tiger·tec Silver coating affect performance? The Tiger·tec Silver coating on the WSM33S grade improves heat resistance and wear behaviour, extending tool life and promoting stable cutting conditions during demanding turning operations. Is this insert suitable for finishing or roughing operations? The insert’s combination of geometry and coating supports both stable roughing and consistent finishing passes on difficult‑to‑cut materials; selection of cutting parameters determines the preferred application. Which chipformer is integrated and why is it important? This item features the 3E500N04‑GD6 chipformer, engineered to manage chip flow and breakage under high thermal loads, reducing risk of chip entanglement and improving surface integrity. How does this grade support production reliability? By combining a robust substrate with the Tiger·tec Silver coating and a controlled chipformer, the insert reduces unexpected wear and edge failure, delivering predictable performance and fewer tool changes in production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. The brand Walter Tools is mentioned for identification and explanatory purposes only. The offered item is original, factory‑new merchandise of the manufacturer.
GX24-3E500N04-UA4 WKP13S Wendeplatten - Walter Tools
Take full advantage of the combination of Tiger‑tec Silver coating and the WKP13S cutting grade for consistent wear resistance and stable chip formation; this increases process reliability and reduces tool change frequency. Order directly via Metav Werkzeuge or consult our specialists for tailored machining parameters. GX24-3E500N04-UA4 WKP13S indexable turning insert — Tiger‑tec Silver, for steel and cast iron, Walter Tools GX24-3E500N04-UA4 WKP13S is a coated indexable turning insert designed for productive turning of steels and cast irons in industrial turning applications Tiger‑tec Silver coating for long tool life WKP13S coated carbide for reliable wear resistance Optimised 3E500N04‑UA4 chipbreaker for chip control Dedicated for machining steel (P) and cast iron (K) Increased productivity through durable coating and grade The combination of the Tiger‑tec Silver coating and the WKP13S grade delivers a measurable improvement in tool life and cutting stability. The grade is a coated carbide designed to tolerate the thermal and mechanical stresses typical of turning steel and cast iron, which means fewer interruptions for tool changes and a more predictable production schedule. The coating reduces adhesive and abrasive wear, so productivity gains translate directly into lower unit costs and higher throughput. Precise material suitability and controlled chip behaviour Designed for ISO groups P and K, the insert supports turning operations on a broad range of unalloyed and alloyed steels as well as grey and nodular cast irons. The WKP13S chemistry and coating combination is tuned for the heat and chip characteristics encountered with these materials, improving chip control and reducing the likelihood of built‑up edge. For operations that demand consistent surface quality, the insert geometry and coating work together to produce stable cutting conditions and repeatable finishes. Geometry engineered for consistent surface finish and tool life The 3E500N04‑UA4 chipbreaker geometry provides controlled shear and predictable chip segmentation, which benefits automatic chip evacuation and machine uptime. The insert design supports reliable milling forces and helps maintain a consistent contact zone at the tool edge, resulting in an improved surface finish and extended effective cutting time. For production runs where dimensional stability and repeatability matter, this geometry reduces variance and keeps cycle times steady. Practical advantages in the workshop and on the shopfloor In everyday use, the insert's balanced properties mean fewer adjustments and lower tooling costs per part. The WKP13S grade offers stable performance across varying batch sizes, while the coating minimises downtime caused by premature wear. As a Walter Tools solution in the Tiger‑tec Silver series, the insert is suited to process‑oriented setups where reproducibility and economy are priorities; this makes it a fitting choice for jobbing shops and continuous production alike. Select Walter Tools Tiger‑tec Silver inserts for dependable turning performance and contact Metav Werkzeuge for ordering or machining advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: GX24-3E500N04-UA4-WKP13S-WALTER Article: GX24-3E500N04-UA4 WKP13S Type: Indexable turning insert Brand: Walter Tools Facts Series: Tiger‑tec Silver Grade: WKP13S Chipbreaker: 3E500N04‑UA4 Material suitability: P / K Special features Coated carbide grade WKP13S Optimised chip control for steel and cast iron Stable chip formation and wear resistance Designed for productive turning applications FAQ Which materials is this insert intended for? The insert is intended for machining steel (P) and cast iron (K) as specified for the GX24‑3E500N04‑UA4 WKP13S indexable turning insert by Walter Tools. What benefits does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating enhances wear resistance and reduces adhesive and abrasive wear, helping the GX24‑3E500N04‑UA4 WKP13S maintain cutting edge integrity over longer production cycles. How does the 3E500N04‑UA4 chipbreaker affect turning performance? The 3E500N04‑UA4 chipbreaker promotes controlled chip segmentation and reliable evacuation, which improves surface finish and reduces the risk of chip‑related interruptions during turning with this Walter Tools insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Markennamen und geschützte Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
GX24-3E500N04-UA4 WKP33S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP33S grade for stable edge life and reliable chip control in demanding turning applications; this results in consistent productivity on both steel and cast iron components. Order the GX24-3E500N04-UA4 WKP33S insert directly via Metav Werkzeuge or consult the Metav team for application-specific advice. GX24-3E500N04-UA4 WKP33S indexable turning insert — Tiger·tec Silver, for steel & cast iron (Walter Tools) The GX24-3E500N04-UA4 WKP33S is an indexable turning insert engineered for productive machining of steel and cast iron, combining a modern coated-carbide grade with a geometry optimised for reliable chip formation. Tiger·tec Silver coating for long tool life WKP33S grade tuned for steel and cast iron 3E500N04-UA4 chipbreaker for controlled chips Stable cutting edge for consistent surface finish Extended tool life from advanced coating technology The combination of the Tiger·tec Silver coating and a coated-carbide substrate delivers tangible gains in wear resistance and edge stability. Coated carbide reduces abrasive and thermal wear compared with uncoated grades; this means longer intervals between indexings and fewer unplanned tool changes. For production environments, that translates into higher spindle uptime and lower unit cost per part, while maintaining consistent dimensional accuracy and surface condition. Consistent machining performance on steel and cast iron Designed for the ISO groups P (steel) and K (cast iron), the WKP33S grade manages the specific heat and chip-formation behaviours of both materials. The chemical and mechanical properties of the grade provide balanced toughness and hardness, reducing nose wear when machining unalloyed or alloyed steel as well as the abrasive nature of cast iron. The result is predictable tool life and repeatable component quality across mixed batches. Efficient chip control that reduces interruptions The 3E500N04-UA4 chipbreaker geometry promotes short, manageable chips in typical turning feeds and depths for these workpiece materials. Effective chip control lowers the risk of entanglement, decreases cycle interruptions and simplifies post-process handling. For operators and process planners, this means fewer manual interventions and a smoother production flow during long runs or unattended shifts. Robust grade for repeatable results in series production The WKP33S composition targets a balance between wear resistance and edge toughness, yielding a robust grade suitable for continuous production. Its stable cutting edge supports consistent surface finishes and dimensional stability, which benefits downstream processes such as grinding or assembly. The combination of a modern coating system and a proven grade enhances process security in serial machining. Straightforward integration into existing tool systems The geometry and designation of the insert align with standard turning toolholders, enabling simple replacement in existing inserts pockets without complex reworking. The indexable insert concept keeps tool inventory manageable and allows quick reconditioning by indexing, delivering predictable maintenance cycles and reduced setup times. Why production engineers specify this insert for demanding tasks Process engineers select the GX24-3E500N04-UA4 WKP33S when the priority is a balance of longevity, reliable chip behaviour and versatility across steel and cast iron. The combination of Tiger·tec Silver coating, a purpose-developed grade and an effective chipbreaker provides a pragmatic solution for high-throughput turning operations where consistent part quality and machine availability are decisive. Discuss application requirements with Metav Werkzeuge and secure the GX24-3E500N04-UA4 WKP33S insert from Walter Tools for robust, high-volume turning operations — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: GX24-3E500N04-UA4-WKP33S-WALTER Name: GX24-3E500N04-UA4 WKP33S indexable turning insert Brand: Walter Tools Series: Tiger·tec Silver Grade: WKP33S Facts Numerical specifications: no dimensional or cutting data provided Price information: not stated in the product data Quantity per pack: not specified Special features Coating: Tiger·tec Silver Chipbreaker: 3E500N04-UA4 Applicable materials: steel (P), cast iron (K) Material designation: P / K Insert designation without grade: GX24-3E500N04-UA4 Product type: indexable turning insert SKU: GX24-3E500N04-UA4-WKP33S-WALTER FAQ What materials is this insert suitable for? The GX24-3E500N04-UA4 WKP33S insert is suitable for ISO material groups P (steel) and K (cast iron), with the WKP33S grade optimised for the heat and chip conditions typical for those materials. What is the benefit of the Tiger·tec Silver coating? The Tiger·tec Silver coating increases wear resistance and thermal stability on the insert, extending tool life and supporting consistent machining performance under demanding conditions. Which chip behaviour can be expected with the 3E500N04-UA4 chipbreaker? The 3E500N04-UA4 chipbreaker produces short, controlled chips in standard turning parameters, reducing the risk of chip entanglement and minimising process interruptions. Is this insert compatible with standard toolholders? The insert designation GX24-3E500N04-UA4 is compatible with conventional toolholder systems designed for indexable turning inserts of this geometry; verify holder compatibility prior to use. How does the WKP33S grade affect productivity? WKP33S offers a balance between toughness and hardness; in practice this leads to stable cutting edges, fewer indexings and improved overall process security in serial production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no commercial or legal affiliation between Metav Werkzeuge and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com