MPMX080305-F57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WSM35G carbide grade and a stable 0.5 mm corner radius for reliable machining of stainless steel and heat‑resistant alloys; order directly via Metav Werkzeuge or consult the specialists for application advice. MPMX080305-F57 WSM35G milling insert, Tiger‑tec Gold — Walter Tools The MPMX080305-F57 WSM35G is a coated carbide milling insert from Walter Tools, designed for robust performance when machining stainless steel and high‑temperature superalloys. Tiger‑tec Gold coating for wear resistance Designed for stainless steel and superalloys 11° clearance angle for secure cutting 0.5 mm corner radius for robust cutting edges High productivity through optimised grade and coating The combination of the WSM35G carbide grade and the Tiger‑tec Gold coating delivers a balance of wear resistance and edge stability that reduces downtime and keeps cycle times short. The coated hardmetal construction supports consistent cutting behaviour under thermal stress, which is particularly important when working with materials from the M and S groups. The result is improved process reliability and extended insert life, translating into a measurable productivity gain for series production. Material compatibility and what it means in practice This insert is specified for material groups M and S, meaning suitability for stainless steel (stainless steels) and heat‑resistant superalloys or titanium. The substrate and coating are engineered to cope with the poor thermal conductivity and high work‑hardening tendency of these materials. In practice, that means more secure chip formation and fewer edge failures during interrupted cuts. The F57 chipbreaker supports manageable chip evacuation, reducing the risk of surface damage and enhancing reproducibility on complex components. Geometry and stability for dependable machining Key geometry features—an 11° clearance angle and a 0.5 mm corner radius—are chosen to provide a compromise between edge strength and accessibility into tighter features. The modest corner radius increases robustness against chipping in heavy engagement cuts, while the clearance angle maintains cutting efficiency and reduces rubbing on the flank. Together with the plate thickness and size, these design choices enable stable performance when finishing or medium‑range roughing operations on demanding workpieces. Integration and handling: efficiency on the shop floor The insert's ISO designation and the standardised clamping interface facilitate quick index changes and secure seating in common milling cutter bodies. The MPMX080305-F57 WSM35G indexable insert simplifies inventory management by matching established toolholders and cutting data sets; this reduces setup variability and supports reproducible results across multiple machines. For production teams, the clear specification means easier parameter transfer and fewer trial cycles before reaching full cutting performance. Contact Metav Werkzeuge for tailored application support on Walter Tools Tiger‑tec Gold inserts and to discuss tooling optimisation for stainless steel machining Technical data Article number: MPMX080305-F57-WSM35G-WALTER Designation: MPMX080305-F57 WSM35G Type: Fräswendeschneidplatte (milling insert) Manufacturer: Walter Tools Core specifications Series: Tiger‑tec Gold Grade: WSM35G Free angle: 11° Corner radius: 0.5 mm Plate size: 08 Plate thickness: 03 Chipbreaker: F57 Tolerance class: M Applications & features Material group: S / M Suitable for: stainless steel, heat‑resistant superalloys and titanium Coating: Tiger‑tec Gold (coated carbide) Execution: X FAQ What materials is this insert intended for? The MPMX080305-F57 WSM35G insert from Walter Tools is designed primarily for stainless steel and heat‑resistant superalloys (material groups M and S), offering stable cutting behaviour under thermal load. Which chipbreaker is fitted and what benefit does it provide? This insert uses the F57 chipbreaker, which promotes controlled chip formation and reliable evacuation, reducing the risk of surface damage when machining difficult materials. How does the Tiger‑tec Gold coating affect performance? The Tiger‑tec Gold coating on the WSM35G grade enhances wear resistance and edge stability, extending tool life and improving consistency during longer production runs. Is the corner radius suitable for heavy cuts? With a 0.5 mm corner radius the insert offers increased edge strength for interrupted or heavier engagements while still allowing access to smaller features. Can this insert be used in standard milling cutter bodies? Yes; the ISO designation MPMX080305-F57 aligns with common indexable insert standards, enabling straightforward integration into compatible cutter systems. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
MPMX080305-F57 WSP45G Wendeplatten - Walter Tools
Benefit from the high wear resistance of the Tiger·tec Gold coating combined with the versatile WSP45G grade and a precise 11° relief angle for consistent performance in demanding milling operations; order directly via Metav Werkzeuge or consult the technical team for application advice. MPMX080305-F57 WSP45G milling insert — Tiger·tec Gold, 11° relief angle (Walter Tools) MPMX080305-F57 WSP45G is an indexable milling insert designed for high-performance machining of Stahl, rostfreier Stahl and heat-resistant alloys in demanding production environments Tiger·tec Gold PVD coating WSP45G grade for versatile alloys 11° relief angle for secure cutting 0.5 mm corner radius for precise edges High productivity from a coated, versatile grade The combination of the Tiger·tec Gold coating and the WSP45G grade delivers a balance between wear resistance and toughness that benefits continuous milling operations. Engineered as a coated carbide insert, it supports stable chip formation and reduced flank wear under varying cutting conditions. The grade is optimised for machining Stahl, rostfreier Stahl and challenging high-temperature materials, meaning fewer insert changes and improved throughput. Where conventional grades trade off tool life for toughness, this technology aims to extend service intervals without sacrificing cutting-edge stability. Precision geometry for consistent edge life With a nominal relief angle of 11° and a corner radius of 0.5 mm, the geometry reduces edge chipping while maintaining a defined cutting edge for quality surface finishes. The insert’s tolerance class M ensures repeatable seating and predictable dimensional behaviour in toolholders, which supports process reliability and reduces set-up time. The chipbreaker designation F57 is tuned to promote controlled chip flow during typical milling feeds, lowering the risk of built-up edge and facilitating coolant access where required. These characteristics make the indexable solution suitable for serial machining and mixed-production environments. Application-oriented benefits for manufacturing teams Specified as a P/M/S-capable grade, the insert is suitable for a broad material spectrum: P for Stahl, M for rostfreier Stahl, and S for heat-resistant superalloys and Titan applications. This breadth simplifies tool inventory and helps standardise tooling across multiple part families. The insert is available in the MPMX080305-F57 designation and fits common milling cutter systems that accept this code. By reducing the need for multiple specialised grades, the tool supports economical machining strategies while maintaining surface quality and edge stability in production. For technical recommendations on integrating Walter Tools' Tiger·tec Gold inserts into existing toolpaths, contact Metav Werkzeuge for application support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: MPMX080305-F57-WSP45G-WALTER SKU: MPMX080305-F57-WSP45G-WALTER Designation: MPMX080305-F57 WSP45G Product type: Fräswendeschneidplatte Series: Tiger-tec Gold Facts Relief angle: 11° Corner radius: 0.5 mm Plate size: 08 Thickness code: 03 Tolerance class: M Special features Grade: WSP45G Coating: Tiger·tec Gold (PVD) Chipbreaker: F57 Execution: X Material suitability: P / M / S FAQ Which materials can the MPMX080305-F57 WSP45G machine? The MPMX080305-F57 WSP45G insert is rated for P, M and S groups, meaning it is suitable for Stahl, rostfreier Stahl and heat-resistant superalloys/Titan in milling operations. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold PVD coating on this Walter Tools insert increases wear resistance and thermal stability, extending edge life during continuous and high-speed milling. Is the insert suitable for finishing passes? Yes, the 0.5 mm corner radius and controlled chipflow (F57) make the insert appropriate for producing consistent surface finishes in many milling cycles. How does the tolerance class M affect setup? Tolerance class M offers predictable seating and repeatable positioning in compatible toolholders, which supports faster set-up and consistent machining results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Markennamen und geschützte Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ODHT050408-F57 WKP35G T Wendeplatten - Walter Tools
Reliable machining performance is achieved through the combination of the WKP35G coated grade and the F57 chipbreaker: durable wear resistance and secure chip control help maintain productivity when machining steel and cast iron. Order the ODHT050408-F57 WKP35G milling insert directly via Metav Werkzeuge or ask our consultants if needed. ODHT050408-F57 WKP35G Milling indexable insert (Tiger·tec Gold) by Walter Tools — F57 chipbreaker, 15° clearance The ODHT050408-F57 WKP35G is a precision milling insert designed for productive machining of steel and cast iron, offering coated carbide performance within an octagonal geometry for multiple usable edges. Tiger·tec Gold coated grade WKP35G F57 chipbreaker for stable chip formation 15° clearance with 0.8 mm corner radius Octagonal form with multiple usable edges Enhanced productivity through a wear-resistant grade The WKP35G grade, part of the Tiger·tec Gold series, delivers wear resistance and consistent cutting behaviour that translate into longer tool life and fewer insert changes. As a coated indexable insert, it is engineered to withstand the thermal and abrasive loads typical when machining steel and cast iron, enabling higher metal removal rates and predictable performance. The coating reduces flank wear and supports stable cutting forces, which in turn helps to keep cycle times consistent and machining costs controlled. Reliable chip control and surface quality for repeatable results The F57 chipbreaker is tuned to produce predictable, controllable chips during both continuous and interrupted cuts, reducing the risk of built-up edge and improving operator safety. Combined with the 0.8 mm corner radius and 15° clearance, the insert supports a stable cutting geometry that contributes to an improved surface finish and repeatable tolerances. These geometry choices are beneficial in mixed production runs where shifting between roughing and semi-finishing steps demands dependable edge behaviour. Broad applicability across steel and cast-iron operations Designed for the ISO material groups P and K, this insert suits a wide range of grades encountered in workshop and production environments. The octagonal shape (eight indexable edges) and the standard plate designation size 05 and thickness 04 allow straightforward integration into common cutter bodies, offering cost-efficient indexing and reduced tooling inventory. For less experienced staff, the role of the chipbreaker and coating can be summarised simply: the chipbreaker shapes chips to avoid jams, while the coating protects the cutting edge and reduces wear. Practical benefits for process reliability and handling Using an insert with an octagonal form and multiple usable edges reduces downtime for edge changes and enhances overall process economy. The stable combination of grade and geometry supports consistent machining results across batches, which is particularly important for manufacturers aiming for tight delivery windows and minimal rework. The Walter Tools heritage behind this design emphasises consistent tool life and dependable performance in industrial setups. Get in touch with Metav Werkzeuge for tailored advice on integrating Walter Tools WKP35G inserts into specific processes and to receive recommendations on cutter bodies and cutting parameters. Technical Data Article number / SKU: ODHT050408-F57-WKP35G-WALTER Product type: Milling indexable insert Brand: Walter Tools Grade: WKP35G Series: Tiger·tec Gold Facts Free clearance angle: 15° Corner radius: 0.8 mm Plate form: Octagonal Plate size: 05 Plate thickness: 04 Chipbreaker: F57 Tolerance class: H Special features Coating technology: Tiger·tec Gold Applicable materials: Steel (P), Cast iron (K) Execution: T Multiple indexable cutting edges Stable chip control for interrupted cuts FAQ What materials is this insert suitable for? The ODHT050408-F57 WKP35G insert is suitable for machining steel and cast iron (ISO groups P and K), with the WKP35G grade optimised for those material behaviours. How does the F57 chipbreaker affect machining? The F57 chipbreaker on this Walter Tools insert improves chip formation and evacuation, reducing the likelihood of built-up edge and contributing to a consistent surface finish. How many usable edges are available on the octagonal insert? The octagonal form provides multiple usable edges, allowing several indexings before replacement—this enhances process economy and reduces downtime. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Mark names and registered trademarks are mentioned solely for explanatory purposes; there is no affiliation between our company and the cited brands, and the offered item is an original, factory-new product of the manufacturer.
ODHT050408-F57 WPP35G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold coating and the WPP35G carbide grade delivers high wear resistance and stable chip control for reliable steel machining; order via Metav Werkzeuge or consult the team for application guidance. ODHT050408-F57 WPP35G Walter Tools milling indexable insert (for steel), Tiger‑tec Gold, 0.8 mm corner radius The ODHT050408-F57 WPP35G is a single‑corner milling indexable insert engineered for steel applications, combining a Tiger‑tec Gold coated carbide grade with an optimised chipformer for consistent performance. Tiger‑tec Gold coated carbide grade WPP35G Optimised chipformer F57 for steady chips Octagonal form with 0.8 mm corner radius Designed for steel machining, high wear resistance Consistent machining performance for demanding steel work The Tiger‑tec Gold coating and the WPP35G grade are designed specifically for the thermal and mechanical demands of steel cutting, resulting in stable chip formation and extended tool life. The insert’s geometry and the F57 chipformer reduce the risk of built‑up edge and improve heat dissipation, which translates into fewer interruptions on the shop floor and a more predictable cycle time. For operations requiring reproducible surface quality and repeatable dimensional results, this cutting solution offers measurable process stability. Practical design that reduces downtime and simplifies handling An octagonal insert form with a 0.8 mm corner radius provides multiple cutting edges and efficient indexability, increasing the number of usable cutting positions per insert. The 15° clearance angle supports secure engagement in typical milling holders while minimising rubbing and unnecessary flank wear. Together these design elements support rapid edge changes and lower tooling costs per part without compromising on surface integrity or component tolerances. Material and coating explained for application planning The coated cemented carbide grade WPP35G from the Tiger‑tec Gold series combines a wear‑resistant substrate with a multi‑layer surface treatment to balance toughness and hardness. The grade is optimised for ISO group P (steel) and is suitable for a wide range of unalloyed and alloyed steels where heat generation and chip control are critical. Specifying this insert for milling operations helps reduce the frequency of tool exchanges and supports higher material removal rates with consistent finish quality. Contact Metav Werkzeuge for tailored tooling recommendations on the Walter Tools ODHT050408-F57 WPP35G insert, including application parameters and holder compatibility: eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ODHT050408-F57-WPP35G-WALTER Product label: Fräswendeschneidplatte ODHT050408-F57 WPP35G Walter Tools Grade: WPP35G Series: Tiger‑tec Gold Facts Free cutting angle: 15° Corner radius: 0.8 mm Shape: Octagonal Size code: 05 Thickness code: 04 Tolerance class: H Special features Coating / technology: Tiger‑tec Gold (coated carbide) Chipformer: F57 Application group: Steel (ISO P) Execution: T FAQ What materials is this insert suitable for? The ODHT050408-F57 WPP35G insert is designed primarily for steel (ISO P); the Tiger‑tec Gold grade optimises wear resistance and chip control during steel machining. What does the F57 chipformer do? The F57 chipformer promotes steady chip breakage and controlled evacuation, improving machining stability and reducing the risk of built‑up edge during interrupted or continuous milling. How does the 0.8 mm corner radius affect results? A 0.8 mm corner radius provides a balance between edge strength and achievable surface finish, offering robust performance on medium to heavy milling passes while maintaining good part quality. Is the insert suitable for high‑speed cutting? The coated carbide grade and geometry are geared towards stable cutting in steel; recommended cutting parameters should be validated per machine capability and workpiece specifics. How many usable cutting edges does the octagonal form provide? The octagonal configuration yields multiple indexable edges, allowing for economical re‑indexing and extended in‑service life compared with single‑edge designs. Manufacturer: Walter AG; Tübingen; Germany; Part of the Sandvik Group Protected trademarks and trade names are the property of their respective owners. Brand names are used solely for explanation. There is no connection between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
ODHT050408-F57 WSP45G Wendeplatten - Walter Tools
Combining the Tiger‑tec Gold PVD coating and the robust WSP45G grade with a 15° clearance and 0.8 mm corner radius yields reliable edge stability and consistent chip control for productive milling across steel, stainless steel and heat‑resistant alloys. Order the ODHT050408‑F57 WSP45G milling insert directly via Metav Werkzeuge or consult our specialists for application support. ODHT050408‑F57 WSP45G Walter Tools — Milling insert with Tiger‑tec Gold PVD and 0.8 mm corner radius The ODHT050408‑F57 WSP45G is a coated carbide milling insert engineered for general‑purpose and demanding face and shoulder milling in steel, stainless steel and high‑temperature alloys. ODHT050408‑F57 WSP45G by Walter Tools Tiger‑tec Gold PVD coating for long life Optimised for steel, stainless and superalloys 15° clearance, 0.8 mm corner radius Reliable milling performance for higher throughput The Tiger‑tec Gold PVD‑coated WSP45G grade offers a balance of wear resistance and edge toughness that supports stable cutting under typical milling loads. Designed for the ISO material groups P / M / S, the grade accommodates unalloyed and alloyed steels, stainless steel and heat‑resistant superalloys or titanium variants. The combination of coating technology and substrate hardness reduces flank wear and extends tool life, which in turn lowers changeover frequency and increases productive spindle hours. Geometry and chip control tuned for practical production The insert’s octagonal shape provides multiple indexing positions, improving cost efficiency per cutting edge. The integrated chipbreaker F57 stabilises chip formation in a wide range of feeds and depths of cut, helping to avoid built‑up edge and interrupted chip evacuation. Key geometry values such as 15° clearance, 0.8 mm corner radius, size 05 and thickness 04 deliver an optimal compromise between edge strength and cutting accessibility, making the part suitable for both roughing and semi‑finishing tasks. Process reliability and reproducible part quality Tolerance class H ensures consistent seat and location in standard toolholders, which supports repeatable results in series production. The combination of coated carbide and a robust edge preparation leads to a stable cutting edge under thermal and mechanical stress, producing better surface finishes and reducing scrap rates. As part of a controlled tooling concept, this insert contributes to shorter setup times and predictable tool‑change intervals, which benefits milling operations that prioritise uptime and consistent component quality. For tailored advice on integrating Walter Tools’ Tiger‑tec Gold inserts into existing milling processes, contact Metav Werkzeuge for application recommendations and availability at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number / SKU: ODHT050408‑F57‑WSP45G‑WALTER Product designation: ODHT050408‑F57 WSP45G Product type: Milling insert (indexable) Facts Clearance angle: 15° Corner radius: 0.8 mm Size: 05 Thickness: 04 Tolerance class: H Special features Series: Tiger‑tec Gold Grade: WSP45G (PVD‑coated carbide) Chipbreaker: F57 Shape: Octagonal Material suitability: steel (P), stainless steel (M), superalloys and titanium (S) FAQ Which materials can be machined with this insert? The ODHT050408‑F57 WSP45G insert is suitable for steel, stainless steel and heat‑resistant superalloys / titanium in line with the P / M / S ISO groups; the WSP45G grade and Tiger‑tec Gold coating are chosen for these applications. What is the purpose of the F57 chipbreaker? The F57 chipbreaker is designed for controlled chip formation during face and shoulder milling, improving chip evacuation and reducing the risk of built‑up edge on the cutting face. How do the insert geometry values influence performance? The 15° clearance and 0.8 mm corner radius provide a robust cutting edge with good strength for roughing, while the octagonal form yields multiple indexable edges to extend usable life. Which series and coating technology does this insert use? This insert belongs to the Tiger‑tec Gold series and features a PVD‑coated carbide grade (WSP45G), selected to balance wear resistance and edge toughness for demanding milling tasks. Is the insert suitable for series production and automated cells? Yes. The combination of consistent tolerance class H, coated carbide grade and stable chip control makes the ODHT050408‑F57 WSP45G suitable for reliable, repeatable performance in production environments. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The item offered is original, factory‑new goods from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
ODHT0504ZZN-F57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP25S grade for robust performance in steel and cast iron machining, paired with an octagonal design and 15° clearance for secure, repeatable cutting. Order the insert directly via Metav Werkzeuge or consult the team for technical clarification. ODHT0504ZZN-F57 WKP25S — Tiger·tec Silver milling indexable insert, 15° clearance (Walter Tools) The ODHT0504ZZN-F57 WKP25S is a milling indexable insert designed for productive machining of steel and cast iron, offering a multi‑edge octagonal format and a Tiger·tec Silver coated, wear‑resistant grade. Tiger·tec Silver coating for enhanced wear resistance WKP25S grade optimised for steel and cast iron Octagonal shape for multiple indexable cutting edges 15° clearance for stable cutting performance Longer tool life through an advanced coating system The Tiger·tec Silver coating combined with the WKP25S substrate provides a measurable improvement in wear behaviour during interrupted and continuous milling of ISO groups P and K. This coating technology reduces flank and crater wear under typical steel and cast iron cutting temperatures, which translates into extended tool life and fewer insert changes. The result is a more predictable manufacturing process and lower downtime, helping to keep cycle times consistent in batch production. Consistent chip control and secure edge engagement Equipped with the F57 chipbreaker and an octagonal plate form, this indexable insert offers effective chip formation and evacuation when machining medium to heavy depths of cut. The 15° clearance angle supports stable cutting geometry, reducing the risk of rubbing and improving surface finish. Multiple indexable edges increase the usable life per insert, supporting both throughput and cost efficiency on horizontal and face milling operations. Precision and process stability for reliable results Manufactured to tolerance class H and an execution suited to industrial milling, the insert’s geometry and size provide repeatable seating in compatible cutters. The octagonal format and standardised designation ensure straightforward replacement and re‑indexing, while the WKP25S grade is tailored to cope with the typical heat and abrasion encountered in steel and cast iron machining. This combination is aimed at shops that prioritise process reliability and consistent component quality. Practical application and handling guidance This insert is intended for machining tasks covered by ISO material group P (steel) and K (cast iron). The robust coated carbide construction is suited to a wide range of steels and cast irons encountered in general engineering and production environments. For optimal results, ensure correct clamping torque and clean seat faces when mounting the insert; regular inspection of cutting edges will preserve component surface quality and help plan economical tool changes. If supplementary cutting data is required, technical consultants can advise feed and speed ranges based on the specific machine and workpiece. For machining steel and cast iron with the reliability of Tiger·tec Silver and the WKP25S grade, contact Metav Werkzeuge for tailored recommendations and ordering: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ODHT0504ZZN-F57-WKP25S-WALTER Label: Fräswendeschneidplatte ODHT0504ZZN-F57 WKP25S Walter Tools Manufacturer: Walter Tools Facts Grade: WKP25S Coating technology: Tiger·tec Silver Clearance angle: 15° Chipbreaker: F57 Plate form: octagonal Plate size: 05 Plate thickness: 04 Tolerance class: H Execution: T Special features Coated carbide insert Suitable for ISO P (steel) and ISO K (cast iron) Multi‑edge octagonal design Optimised for wear resistance and chip control FAQ What materials is this insert suitable for? The insert is designed for ISO material groups P and K, meaning it is suitable for machining steels and cast irons; the WKP25S grade is optimised for these materials. How does the Tiger·tec Silver coating benefit production? Tiger·tec Silver improves wear resistance and thermal stability under typical cutting conditions, which helps extend the insert life and maintain consistent cutting performance. What does the F57 chipbreaker do? The F57 chipbreaker promotes reliable chip formation and evacuation during milling operations, supporting stable cutting and improved surface finish. How many indexable edges does the octagonal shape provide? The octagonal plate form offers multiple usable edges, increasing edge rotations per insert and contributing to cost efficiency in serial production. Is the insert compatible with standard ODHT tool holders? The designation ODHT0504ZZN-F57 indicates the insert geometry and chipbreaker; compatibility depends on the cutter body designed for this insert profile and clamping method. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named manufacturers. The offered item is an original, factory‑new product from the manufacturer.
ODHT0504ZZN-F57 WKP35G Wendeplatten - Walter Tools
Benefit from the durable Tiger‑tec Gold coating combined with the WKP35G coated carbide grade and the F57 chipbreaker for consistently stable milling in steel and cast iron; the insert’s octagonal form and 15° clearance support economical edge changes and repeatable performance. Order and application advice available via Metav Werkzeuge. ODHT0504ZZN-F57 WKP35G — Indexable milling insert for steel and cast iron by Walter Tools A ODHT0504ZZN-F57 WKP35G indexable milling insert engineered for productive roughing and semi‑finishing across a wide range of steel and cast iron machining tasks Tiger‑tec Gold coated carbide grade WKP35G Chipbreaker F57 for reliable chip control Octagonal form for four cutting edges 15° clearance angle for stable milling Longer tool life through advanced coating and substrate The combination of Tiger‑tec Gold coating with a coated carbide substrate provides enhanced wear resistance and improved thermal stability, which together extend tool life under continuous milling cycles. The chosen grade emphasises stable chip formation and reduced flank wear, translating into fewer tool changes and longer productive runs. For manufacturing processes demanding consistent repeatability, this performance secures predictable cycle times and lower per‑component tooling cost. Predictable chip control and process security Built around the F57 chipbreaker, the insert offers controlled chip formation that supports steady evacuation and reduces the risk of built‑up edge or secondary‑operation downtime. The octagonal geometry provides multiple effective cutting edges, enabling quick index changes and maintaining cutting geometry integrity. As a result, process security improves and surface quality remains constant over extended tool life, supporting efficient batch production and shorter non‑productive times. Application versatility for steel and cast iron machining Designed for the ISO groups P and K, the grade is optimised for machining a broad spectrum of steel and cast iron materials. The 15° clearance angle balances cutting edge strength with clearance to avoid rubbing, making this insert suitable for both roughing passes and lighter finishing cuts depending on the selected cutter and parameters. Engineers benefit from a single, versatile insert that adapts across typical workshop load cases, simplifying tool inventories and setup choices. For application-specific recommendations and fast availability contact Metav Werkzeuge for expert advice and supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: ODHT0504ZZN-F57-WKP35G-WALTER Name: Fräswendeschneidplatte ODHT0504ZZN-F57 WKP35G Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger‑tec Gold Facts Free clearance angle: 15° Plate form: Achteck (octagonal) Plate size: 05 Plate thickness: 04 Tolerance class: H Special features Grade: WKP35G Chipbreaker: F57 Material suitability: P (steel), K (cast iron) Coating technology: Tiger‑tec Gold Execution: T FAQ What materials is this insert suitable for? The ODHT0504ZZN‑F57 WKP35G insert is specified for ISO groups P and K, making it suitable for a wide range of steel and cast iron machining applications. How does the Tiger‑tec Gold coating help in production? The Tiger‑tec Gold coating increases thermal and wear resistance on the insert, improving tool life and helping to maintain consistent cutting performance across longer production runs. How many usable edges does the octagonal form provide? The octagonal form provides multiple indexable cutting edges, enabling efficient edge changes and reducing tool change frequency in continuous operations. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and brands are the property of their respective owners. Brand names and protected trademarks are mentioned for clarification only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
ODHT0504ZZN-F57 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coated carbide, the F57 chipbreaker and a 15° relief for reliable steel machining and consistent productivity; order directly via Metav Werkzeuge or consult our specialists for cutting-parameter recommendations. ODHT0504ZZN-F57 WPP35G Milling indexable insert by Walter Tools — Tiger·tec Gold coated, 15° relief ODHT0504ZZN-F57 WPP35G is a coated carbide milling indexable insert designed for steel machining with an optimised F57 chipbreaker and octagonal form for multiple usable edges Tiger·tec Gold coated carbide Optimised F57 chipbreaker for steel 15° relief for secure chip flow Octagonal form for multiple edges Consistent productivity for steel machining The Tiger·tec Gold coating combined with the WPP35G grade provides a balanced mix of hardness and toughness, designed specifically for machining steel (ISO P). The insert's coating reduces friction at the cutting zone and increases thermal resistance, which translates into longer cutting times between indexings and a lower cost per component. The built-in chipbreaker F57 is engineered for the typical heat and chip characteristics of steels, supporting controlled chip formation and reducing tool-related interruptions during production. Geometry that extends tool life and reduces downtime The octagonal form supplies several indexable edges, allowing multiple reuses of the cutting geometry before replacement. This geometry, paired with the insert’s size and thickness, improves rigidity and stability in interrupted or continuous milling operations. The tolerance designation H ensures consistent seating and repeatability in the toolholder, so tool changes are faster and machine uptime is higher. Fewer tool changes mean less handling and predictable process cycles in the workshop. Efficient chip control and improved surface quality An optimised chipbreaker F57 promotes short, manageable chips when cutting unalloyed and alloyed steels, which lowers the risk of built-up edge and secondary finishing. The coated hardmetal substrate of the insert maintains a stable cutting edge under thermal load, contributing to a steady surface finish and repeatable dimensional results. In practical terms, stable chip evacuation reduces manual intervention at the machine and supports higher feed rates where appropriate. Application guidance and practical selection tips This insert is intended for use on steel components in general machining operations where balanced wear resistance and toughness are required. When selecting parameters, start with conservative feeds and moderate speeds and then increase steadily while monitoring edge wear and chip shape. For special steels or unusual geometries, consult Metav Werkzeuge for tailored parameter sets and holder recommendations to make best use of the insert’s Tiger·tec Gold properties and the F57 chip control. The insert’s format and coating make it a versatile choice across a wide range of steel machining tasks. Contact Metav Werkzeuge for application-specific cutting data and supply options for Walter Tools ODHT0504ZZN-F57 WPP35G inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: ODHT0504ZZN-F57-WPP35G-WALTER Product designation: ODHT0504ZZN-F57 WPP35G Manufacturer: Walter Tools Series: Tiger-tec Gold Execution: T Core data Relief angle: 15° Insert size: 05 Thickness: 04 Tolerance class: H Special features Tiger·tec Gold coating Grade WPP35G (coated carbide) Chipbreaker F57 Octagonal insert form Suitable for steel (ISO P) FAQ Which materials is this insert designed to machine? The ODHT0504ZZN-F57 WPP35G insert from Walter Tools is designed primarily for steel (ISO P), covering unalloyed and alloyed steels with the typical heat and chip behaviour encountered in steel machining. How does the F57 chipbreaker affect performance? The F57 chipbreaker on the ODHT0504ZZN-F57 WPP35G promotes controlled chip formation and evacuation when cutting steels, improving process stability and reducing the likelihood of built-up edge on the insert. How many usable edges does the octagonal form provide? The octagonal shape gives multiple indexable cutting edges, enabling several reindexes before insert replacement; this increases effective tool life and reduces downtime in series production. Is the insert suitable for finishing passes? Yes. The Tiger·tec Gold coating and the insert geometry support a good surface finish in finishing and semi-finishing operations on steel, provided cutting parameters are selected accordingly. What does the tolerance class H mean for mounting accuracy? Tolerance class H indicates a tight manufacturing tolerance that ensures consistent seating in the toolholder, improving repeatability and reducing variability in part dimensions when using the ODHT0504ZZN-F57 WPP35G insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original factory-new product of the manufacturer Walter Tools.
ODHT0504ZZN-F57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold thermal stability, a robust F57 chipbreaker and an octagonal indexable design for consistent machining of stainless steels and heat‑resistant alloys. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. ODHT0504ZZN-F57 WSM35G — Milling indexable insert, Tiger·tec Gold, Walter Tools The ODHT0504ZZN-F57 WSM35G is a coated carbide milling insert engineered for demanding operations on stainless steels and heat‑resistant superalloys, offering stable cutting edges and secure chip control. Tiger·tec Gold coating for heat resistance Octagonal eight‑edged indexable design 15° clearance angle for secure cutting Optimised F57 chipbreaker for tough materials Increased process reliability when machining difficult alloys The Tiger·tec Gold technology and the WSM35G grade provide a combination of thermal resistance and edge stability that is especially beneficial for stainless steels and nickel‑based alloys. The coated carbide substrate supports controlled chip formation, reducing the risk of built‑up edge and unexpected tool wear. With the octagonal shape delivering multiple usable cutting edges, the insert offers economical re‑indexing and predictable performance under elevated cutting temperatures. This technical balance helps maintain component tolerances and reduces scrap rates in serial production. Fewer tool changes, higher throughput The octagonal geometry and compact size code (05) allow for rapid index changes and extended service life of the toolset. The F57 chipbreaker is designed to break and evacuate chips reliably in long, continuous cuts, which improves surface finish and lowers cycle times. Combined with the 15° clearance angle, the insert secures a constant engagement angle that supports stable chip flow and consistent cutting forces, translating into measurable productivity gains on milling operations of tough materials. Clear guidance for selection and application This indexable insert is a coated carbide grade developed by a recognised brand for heavy‑duty milling tasks. The designation and series data point to suitability for the ISO material groups M (stainless steels) and S (heat‑resistant superalloys and titanium), which are known for their poor heat dissipation and abrasive conditions. When selecting parameters, favour moderate feeds and adequate coolant strategies for optimum edge life; the insert’s coating and chipbreaker reduce sensitivity to thermal spikes, but correct machining data remains key for repeatable results. Dependable brand performance and production benefits Walter Tools’ design focus on stable cutting edges and reproducible performance supports long production runs and process stability. The combination of a specialised grade, proven coating technology and an indexable octagonal form means fewer unscheduled tool interventions and better throughput. For manufacturing environments where consistent quality and reduced downtime matter, this insert offers a rational, productivity‑focused choice with technical backing from an established manufacturer. For application recommendations or to reserve stock of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored advice and supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ODHT0504ZZN-F57-WSM35G-WALTER ISO designation: ODHT0504ZZN-F57 WSM35G Grade/series: WSM35G, Tiger·tec Gold Manufacturer: Walter Tools Core data Size code: 05 Thickness: 04 Clearance angle: 15° Tolerance class: H Chipbreaker: F57 Special features Coated carbide grade optimised for heat resistance Octagonal (eight‑edged) insert form for multiple indexes Designed for stainless steels (M) and superalloys/titanium (S) Suitable for demanding milling operations requiring stable edge control FAQ What materials is this insert suitable for? The ODHT0504ZZN‑F57 WSM35G insert is specified for stainless steels (M) and heat‑resistant superalloys/titanium (S) according to its Tiger·tec Gold coating and WSM35G grade properties. How many cutting edges are available per insert? With an octagonal geometry, the insert provides eight indexable cutting edges, allowing multiple re‑uses before disposal. What is the primary benefit of the F57 chipbreaker? The F57 chipbreaker promotes reliable chip segmentation and evacuation during milling, improving surface finish and reducing the likelihood of chip‑related disturbances. Does the insert require a special coolant strategy? The coated grade and chipbreaker reduce sensitivity to thermal loads, but employing appropriate coolant or lubrication for stainless steels and superalloys is recommended to maximise edge life. Which series and brand manufacture this insert? This insert belongs to the Tiger·tec Gold series and is supplied by Walter Tools, offering engineered wear resistance and predictable tool life. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only. There is no affiliation between our company and the manufacturers mentioned. The offered item is an original, brand‑new product from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ODHT0504ZZN-F57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold grade and the octagonal geometry with a 15° clearance angle to achieve consistent chip formation and extended tool life; order original Walter Tools inserts through Metav Werkzeuge for reliable supply and application advice. ODHT0504ZZN-F57 WSP45G milling insert by Walter Tools — Tiger·tec Gold, 15° clearance The ODHT0504ZZN-F57 WSP45G is a high-performance indexable milling insert engineered for versatile milling applications in Stahl, rostfreier Stahl and heat-resistant alloys, combining a robust PVD-coated carbide grade with an efficient chipbreaker design. Tiger·tec Gold PVD-coated carbide grade WSP45G Suitable for Stahl, rostfreier Stahl and superalloys Octagonal geometry with 15° clearance angle Robust chip control F57 for reliable machining High-performance grade for demanding milling operations The WSP45G grade from the Tiger·tec Gold range is a PVD-coated carbide developed for demanding milling tasks where a balance of wear resistance and edge stability is required. Specifically designed to cope with the thermal and mechanical loads typical when machining Stahl, rostfreier Stahl and certain high-temperature alloys, this grade provides consistent cutting-edge behaviour under intermittent and full-immersion cutting. For production environments seeking predictable tool life, the coating technology reduces flank wear and supports longer intervals between indexings, which contributes to improved cycle time and lower tooling overheads. Geometry and chip control that stabilise the process The octagonal insert shape and a 15° clearance angle give the insert inherent rigidity and multiple indexable positions, which reduces downtime for tool changes. Combined with the F57 chipbreaker, the geometry promotes controlled chip fragmentation and evacuation even under varying cutting parameters. For operators less familiar with chipbreaker nomenclature: the chipbreaker is a designed recess on the rake face that shapes chip flow and reduces the risk of long, entangling swarf; the result is improved surface quality and reduced risk of built-up edge during milling of tougher alloys. A practical choice for efficient production and inventory rationalisation With tolerance class H and a compact plate size (05, thickness 04), the insert supports repeatable seating and interchangeability across modular milling cutters, helping standardise tool holders and minimise inventory complexity. The combination of Walter Tools engineering and Tiger·tec Gold materials philosophy means a product aimed at stable chip formation and good tool life, making it suitable for batch production as well as one-off machining tasks where reliability matters. The insert’s versatility reduces the need for multiple grades on the shelf, permitting a leaner tooling strategy without compromising process security. Contact Metav Werkzeuge for tailored application advice and to secure original Walter Tools Tiger·tec Gold inserts for productive milling tasks; Metav Werkzeuge can advise on cutter compatibility and delivery. Technical data SKU: ODHT0504ZZN-F57-WSP45G-WALTER Product: Milling insert (indexable) Series: Tiger·tec Gold Grade: WSP45G Manufacturer: Walter Tools Designation: ODHT0504ZZN-F57 WSP45G Facts Clearance angle: 15° Shape: Octagonal Size: 05 Thickness: 04 Chipbreaker: F57 Tolerance class: H Special features Material grade: P / M / S (suitable for Stahl, rostfreier Stahl, superalloys) Tiger·tec Gold PVD-coated carbide (WSP45G) Versatile for a wide range of milling applications Robust chip control for consistent machining results FAQ What materials can this insert machine effectively? The ODHT0504ZZN-F57 WSP45G insert is suitable for machining Stahl, rostfreier Stahl and selected superalloys, as indicated by its P/M/S designation and the Tiger·tec Gold formulation. How does the F57 chipbreaker affect performance? The F57 chipbreaker on this indexable insert improves chip fragmentation and evacuation, which leads to more stable cutting, better surface finish and reduced risk of swarf-related interruptions during milling. How many times can the insert be indexed? The octagonal geometry provides multiple indexable edges; the exact number of indexings depends on cutting conditions and material, but the geometry is intended to maximise usable edges for cost-effective machining. Is this insert compatible with standard milling holders? The insert designation ODHT0504ZZN-F57 corresponds to standard indexable milling insert geometries; confirmation of fit should be made against the cutter manufacturer’s compatible insert list or tool holder specification. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original factory-new product of the manufacturer.
ODHT0504ZZN-G77 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the tough WSP45G grade in an octagonal ODHT geometry for consistent tool life and reliable chip control. Order the ODHT0504ZZN-G77 WSP45G insert directly via Metav Werkzeuge or request application advice from our consultants. ODHT0504ZZN-G77 WSP45G milling indexable insert — Tiger·tec Gold, 15° clearance (Walter Tools) The ODHT0504ZZN-G77 WSP45G is a PVD-coated carbide milling indexable insert designed for versatile milling of Stahl, rostfreier Stahl and heat-resistant alloys in demanding production environments. Tiger·tec Gold PVD-coated grade WSP45G 15° clearance for stable cutting Octagonal, eight-edge indexable geometry Suitable for Stahl, rostfreier Stahl and superalloys Maximum process reliability and extended tool life The combination of Tiger·tec Gold coating and the WSP45G cutting grade delivers a balance of wear resistance and toughness, optimised for milling applications where thermal loads and edge demands vary. The PVD-coated WSP45G grade is formulated to sustain cutting edges during interrupted cuts and elevated temperatures typical of cutting Stahl, rostfreier Stahl and superalloys. This results in fewer tool changes and a predictable wear curve, supporting stable cycle times and consistent component quality. Controlled chips and improved surface quality A precisely engineered G77 chipbreaker promotes effective chip control across a wide range of feeds and depths of cut, reducing the risk of chip entanglement and tool damage. The 15° clearance angle assists penetration and reduces rubbing on the flank, which supports a better surface finish and lower cutting forces. For shops targeting reproducible finish and reduced rework, the insert's geometry helps convert process stability into measurable manufacturing gains. Cost-efficient indexable design for production environments The octagonal insert form provides up to eight effective cutting edges, increasing the number of index positions per insert and lowering cost per cutting edge. The ODHT geometry and consistent manufacturing tolerance (H) ensure repeatable seating in holders and reliable repositioning after indexing. As an indexable insert, the ODHT0504ZZN-G77 reduces set‑up time and simplifies inventory management compared with brazed or solid tools. Practical application advice and shop-floor benefits This milling insert is suited for both roughing and finishing strategies when matched to appropriate toolholders and machining parameters. The WSP45G grade is particularly helpful where a compromise between wear resistance and edge stability is required. For tailored recommendations—such as preferred feeds, speeds or coolant strategies—Metav Werkzeuge provides application support and process recommendations to help integrate the insert into existing production workflows. For tailored machining advice on the Walter Tools Tiger·tec Gold ODHT0504ZZN-G77 WSP45G milling insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for Stahl, rostfreier Stahl and superalloys Technical Data SKU: ODHT0504ZZN-G77-WSP45G-WALTER Product: Fräswendeschneidplatte / milling indexable insert Brand: Walter Tools WPL designation: ODHT0504ZZN-G77 WSP45G Core specifications Free cutting angle: 15° Plate size: 05 Plate thickness: 04 Tolerance class: H Special features Grade: WSP45G Series: Tiger·tec Gold Chipbreaker: G77 Plate form: octagonal (eight edges) Material suitability: P / M / S (Stahl, rostfreier Stahl, heat-resistant superalloys/titanium) FAQ Which materials can this insert machine effectively? The ODHT0504ZZN-G77 WSP45G insert is engineered for Stahl, rostfreier Stahl and heat-resistant superalloys, reflecting the P / M / S designation of the grade. What does the WSP45G grade provide in daily machining? WSP45G, as a Tiger·tec Gold PVD-coated grade, offers a balance of wear resistance and toughness for the Walter Tools milling insert, helping to extend edge life in variable cutting conditions. How many usable cutting edges are available on the insert? Thanks to the octagonal form, the ODHT0504ZZN-G77 indexable insert provides multiple index positions, yielding up to eight effective cutting edges before replacement. What role does the G77 chipbreaker play? The G77 chipbreaker on the ODHT0504ZZN-G77 promotes controlled chip formation and evacuation, improving process stability and surface quality in both continuous and interrupted milling. Is the insert compatible with standard toolholders for ODHT geometry? The ODHT0504ZZN-G77 WSP45G is manufactured to the ODHT form standard and the declared tolerance H, enabling reliable seating in compatible indexable milling holders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original and brand-new from the manufacturer (Walter Tools).
ODHT0504ZZN-G88 WK10 WK10 Wendeplatten - Walter Tools
Optimise milling processes with a focus on cost-efficiency and repeatable performance: the insert pairs the WK10 uncoated cemented carbide with a G88 chipbreaker for stable chip control and reliable cutting-edge behaviour. Order the insert directly via Metav Werkzeuge or consult the technical advisors for application-specific recommendations. ODHT0504ZZN-G88 WK10 — Indexable milling insert (uncoated, 15° free clearance) — Walter Tools The ODHT0504ZZN-G88 WK10 is a robust indexable milling insert designed for general milling applications where predictable chip formation and multiple indexing are required Octagonal insert for multiple cutting edges Uncoated cemented carbide grade WK10 Chipbreaker G88 for controlled chip formation 15° free clearance for versatile milling Consistent cutting behaviour that supports production targets The octagonal indexable insert geometry provides several usable edges per item, reducing tool change frequency and improving uptime. The WK10 uncoated cemented carbide base delivers a predictable cutting edge appropriate for a wide range of stable applications; the G88 chipbreaker shapes chips to aid evacuation and reduce the risk of re-cutting. Together, these characteristics support a smoother process flow and more consistent component quality while keeping handling straightforward for workshop staff. Precision fit and geometry that simplify set-up With a defined free clearance of 15° and tolerance class H, the insert is manufactured to tight dimensional standards that promote accurate seating in compatible toolholders. The octagonal form combined with plate size 05 and plate thickness 04 offers a balance between rigidity and edge availability, helping to reduce vibration and improve surface finish. The clear specification reduces set-up variability and assists process engineers in repeatable fixture and cutter configuration. Effective chip control to protect the workpiece and machine The integrated G88 chipbreaker is tailored to encourage short, controllable chips under steady cutting conditions, which benefits automated chip removal and downstream handling. As an uncoated grade, the insert facilitates predictable wear behaviour and can be a preferred option where coating compatibility or regrinding is considered. For complex alloys or specialised materials, the product matrix should be consulted to confirm suitability and cutting data. Easy specification, traceability and application advice The insert is identified by its ISO-style designation and can be matched to existing Walter tool systems and compatible holders by referencing the full code. Material designation is listed as catalogue-dependent; therefore, verification against the application matrix is recommended prior to final process release. For tailored selection and cutting-parameter guidance, Metav Werkzeuge can supply datasheets and advise on cutter/insert pairings to achieve the intended throughput and component quality. Contact Metav Werkzeuge for availability and application support on Walter Tools ODHT0504ZZN-G88 WK10, or request tailored cutting data and compatibility checks from our consultants Technical Data SKU: ODHT0504ZZN-G88-WK10-WALTER Designation: ODHT0504ZZN-G88 ISO designation: ODHT0504ZZN-G88 WK10 Manufacturer: Walter Tools Product type: Indexable milling insert Series: Walter Schneidstoffsorte - Serie offen Grade: WK10 Execution: T Core specifications Free clearance angle: 15° Plate form: octagonal Plate size: 05 Plate thickness: 04 Tolerance class: H Special features Chipbreaker type: G88 Material: uncoated cemented carbide (catalogue-dependent) Multiple usable cutting edges due to octagonal shape Designed for predictable chip formation and easy indexing FAQ What materials is this insert suitable for? The ODHT0504ZZN-G88 WK10 is an uncoated cemented carbide insert; material suitability should be checked in the product matrix and manufacturer datasheets to match the WK10 grade to specific workpiece materials. How many cutting edges does the octagonal insert provide? The octagonal shape permits multiple indexing positions; the exact number of usable edges depends on the holder and clamping arrangement for the chosen tool system. What benefit does the G88 chipbreaker offer in milling? The G88 chipbreaker is designed to produce short, controlled chips, aiding evacuation and reducing the likelihood of chip entanglement during continuous milling operations with stable cutting conditions. Is this insert compatible with coated holders or special tool systems? Compatibility is determined by the toolholder interface and clamping geometry; the ODHT0504ZZN-G88 WK10 designation allows exact matching—refer to holder documentation or consult Metav Werkzeuge for confirmation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the brands named. The offered item is original, factory-new goods from the manufacturer (Walter Tools).
ODHT0504ZZN-G88 WXN15 Wendeplatten - Walter Tools
Take advantage of the sharp, uncoated WXN15 carbide grade combined with the G88 chipbreaker and a 15° clearance for efficient machining of non‑ferrous metals; order genuine Walter Tools inserts directly via Metav Werkzeuge or consult our specialists for cutting data and application advice. ODHT0504ZZN-G88 WXN15 milling insert — octagonal, 15° clearance (Walter Tools) ODHT0504ZZN-G88 WXN15 is an octagonal milling insert designed for productive machining of non‑ferrous metals in the Walter N series *Octagonal shape for versatile index positions *WXN15 uncoated carbide for sharp edges *G88 chipbreaker for controlled chip formation *15° clearance for low cutting resistance Clean, controlled cutting for non‑ferrous components The ODHT0504ZZN-G88 WXN15 milling insert pairs an uncoated carbide grade with a geometry optimised for non‑ferrous metals such as aluminium, copper and brass. The WXN15 grade delivers very sharp cutting edges which reduce built‑up edge and promote consistent surface quality. Using an uncoated grade avoids coating adhesion on soft materials, helping to maintain edge sharpness and reduce rework. The result is reliable profile accuracy and improved cycle times when machining prone-to-adhesion alloys. Stable chip management and multiple indexing options The integrated G88 chipbreaker shapes chips for safe evacuation and steady cutting forces, improving process stability on long or interrupted cuts. The octagonal plate form allows multiple index positions for extended tool life and reduced tool change frequency, while the 15° clearance angle lowers friction at the cutting zone and reduces power draw. With tolerance class H and the compact size format, the insert supports repeatable positioning and straightforward seating in standard indexable toolholders, contributing to consistent batch quality. Practical benefits: throughput, surface and tool life Designed within the Walter N series, the insert emphasises rapid metal removal in non‑ferrous applications with minimal downtime. The combination of a keen, uncoated cutting edge and an effective chipformer reduces material adhesion and improves surface finish, which in turn lowers secondary operations. For manufacturers seeking steady production with predictable tool-change intervals, the insert offers a balance of sharpness and robustness that supports higher productivity in automated and manual milling environments. Speak to Metav Werkzeuge for tailored cutting data and to order genuine Walter Tools ODHT0504ZZN-G88 WXN15 inserts directly — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical data SKU: ODHT0504ZZN-G88-WXN15-WALTER Article designation: ODHT0504ZZN-G88 WXN15 Product type: milling insert (indexable) Brand: Walter Tools Core data Grade: WXN15 Chipbreaker: G88 Clearance angle: 15° Plate form: Octagonal Size: 05 Thickness: 04 Tolerance class: H Materials & special features Uncoated cemented carbide Walter N series Suitable for non‑ferrous metals (aluminium, copper, brass) Sharp edge geometry for reduced adhesion Multiple indexing positions FAQ What materials is this insert designed for? The ODHT0504ZZN-G88 WXN15 milling insert is optimised for non‑ferrous metals such as aluminium, copper and brass; the WXN15 uncoated grade and G88 chipbreaker minimise material adhesion and improve surface finish. Is this insert suitable for coated‑tool applications? This insert is an uncoated carbide grade (WXN15) intended for sharp‑edge performance on soft alloys; coating is not applied to avoid adhesion issues with non‑ferrous workpieces. How does the G88 chipbreaker affect machining? The G88 chipbreaker shapes chips to improve evacuation and reduce cutting force fluctuations, supporting stable machining and easier handling of long chips in milling operations. How many index positions are available with the octagonal form? The octagonal plate form provides multiple index positions, extending effective tool life and reducing the frequency of insert replacements in production. Does the insert require a special toolholder? The insert is compatible with standard indexable milling toolholders that accept the ODHT05 form factor; correct seating and clamping ensure the specified tolerance class H and repeatable positioning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes; there is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
ODHT060512-F57 WKP35G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger‑tec Gold wear resistance and the precise WKP35G grade for consistent chip control and extended tool life; order directly via Metav Werkzeuge or contact the consultants for application-specific recommendations. ODHT060512-F57 WKP35G milling indexable insert for steel and cast iron — Tiger‑tec Gold, 15° clearance | Walter Tools The ODHT060512-F57 WKP35G is a coated carbide milling indexable insert from the Tiger‑tec Gold series, engineered for high‑performance machining of steel and cast iron with reliable wear resistance and stable cutting behaviour. Tiger‑tec Gold coated carbide grade WKP35G 15° clearance angle for stable cutting 1.2 mm corner radius, octagonal geometry Optimised for steel (P) and cast iron (K) Reliable wear resistance for uninterrupted production The combination of Tiger‑tec Gold technology with the WKP35G grade delivers elevated resistance to abrasive and adhesive wear, reducing flank and crater wear rates in long production cycles. This coated carbide construction supports higher cutting parameters compared with conventional grades, translating into fewer tool changes and improved machine uptime. For operations processing medium to high hardness steels and typical cast iron compositions, the result is a measurable improvement in overall equipment effectiveness and predictable tool life. Geometry that balances strength and surface quality The insert’s 15° clearance and 1.2 mm corner radius provide a controlled cutting edge that minimises vibration while supporting a good surface finish on both roughing and semi‑finishing passes. The octagonal shape offers multiple indexing positions to reduce tooling costs per part, while the radial geometry ensures positive engagement and reduced cutting forces. In practical terms, this geometry helps maintain dimensional stability and aids in achieving repeatable component tolerances on serial production runs. Chip control and process security for mixed materials Equipped with the F57 chipbreaker, the insert manages chip formation effectively across the ISO P and K groups, making it suitable for operations that switch between steel and cast iron. The chip‑forming design mitigates the risk of built‑up edge and provides predictable chip flow, which supports safe unattended machining and reduces the likelihood of surface damage. The result is enhanced process security and fewer interruptions caused by poor chip evacuation. Precision fit and catalogue‑compatible handling Manufactured to tolerance class H and supplied in the ODHT060512‑F57 geometry, this insert integrates into standard Walter toolholders for the specified family and size. The thickness and size characteristics ensure correct seating and clamping, which preserves cutting accuracy and reduces the chance of premature edge failure. Overall, the insert delivers a cost‑effective balance between cutting performance and lifetime, making it a pragmatic choice for workshops focused on productivity and repeatable quality. For applications requiring high process reliability with Tiger‑tec Gold grade WKP35G, contact Metav Werkzeuge for tailored advice and prompt supply of Walter Tools inserts Technical data Article number: ODHT060512-F57-WKP35G-WALTER Product: Milling indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Core specifications Clearance angle: 15° Corner radius: 1.2 mm Insert size: 06 Thickness: 05 Tolerance class: H Features & materials Grade: WKP35G Chipbreaker: F57 Shape: Octagonal Coating: Tiger‑tec Gold (coated carbide) Suitable for: Steel (P), Cast iron (K) Execution: T FAQ What materials is this insert best suited for? The ODHT060512‑F57 WKP35G insert is designed for steel (P) and cast iron (K) applications according to the WKP35G capability, offering tailored wear resistance for those material groups. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold coating on the WKP35G grade reduces abrasive wear and increases heat resistance, enabling higher cutting parameters and longer service life compared with uncoated grades. What benefit does the F57 chipbreaker provide? The F57 chipbreaker controls chip formation for mixed steel and cast iron operations, improving chip evacuation and reducing the risk of built‑up edge during continuous cutting. Is the insert compatible with standard Walter toolholders? Yes, the ODHT060512‑F57 geometry and tolerance class H are manufactured to fit the corresponding Walter toolholder family for this insert size and form Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product from the manufacturer Walter Tools.
ODHT060512-F57 WPP35G WPP35G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with an optimised F57 chipbreaker and an octagonal insert form delivers productive, repeatable machining of steels; order the ODHT060512-F57 WPP35G milling insert directly via Metav Werkzeuge or consult their application specialists for integration into production. ODHT060512-F57 WPP35G milling insert — Tiger·tec Gold, F57 chipbreaker, for steel (Walter Tools) ODHT060512-F57 WPP35G is a coated carbide milling insert engineered for productive steel machining; it combines a wear-resistant Tiger·tec Gold coating with a robust chipbreaker and an octagonal form to maximise usable cutting edges Tiger·tec Gold coating for extended tool life Optimised F57 chipbreaker for reliable chip control Octagonal insert form for multiple cutting edges 15° free angle and 1.2 mm corner radius Greater productivity through advanced grade and coating The Walter Tools grade from the Tiger·tec Gold series is a coated carbide solution designed to maintain a stable cutting edge under the typical thermal and mechanical loads encountered when machining steels. As a result, the insert supports longer effective tool life and consistent component quality during medium to high-volume production. The material and coating combination reduces flank wear and helps maintain surface finish, which translates into fewer tool changes and improved process uptime. Reliable chip control and economical edge use An F57 chipbreaker combined with an octagonal insert form provides both predictable chip formation and economical use of the cutting edges. The octagonal geometry increases the number of indexable edges per insert, lowering tooling cost per edge, while the 1.2 mm corner radius and 15° free angle balance edge strength and cutting force. These geometric characteristics contribute to secure chip evacuation and steady cutting conditions—particularly important when machining unalloyed and alloyed steels (ISO group P). Simple selection, clear application scope The insert is specified for steel applications and carries tolerance class H, making it suitable for standardised production environments requiring reproducible results. The grade designation WPP35G indicates a coated hardmetal specifically tuned for the P material group; this simplifies grade selection for typical turning and milling operations on steel. Integration into existing toolholders is straightforward where the ODHT060512-F57 geometry is accepted, enabling a quick route to improved process stability without extensive setup changes. Contact Metav Werkzeuge for availability, technical datasheets and application advice on Walter Tools Tiger·tec Gold inserts — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: ODHT060512-F57-WPP35G-WALTER Label: Fräswendeschneidplatte ODHT060512-F57 WPP35G Walter Tools Product type: Milling insert Manufacturer: Walter Tools Grade: WPP35G Series: Tiger-tec Gold Measurements and codes Free angle: 15° Corner radius: 1.2 mm Insert size code: 06 Insert thickness code: 05 Tolerance class: H Chipbreaker: F57 Execution/type code: T Materials & special features Coating: Tiger·tec Gold (coated carbide) Suitable for: Steel (ISO group P) Insert form: Octagon Material application: steel processing Series description: Tiger·tec Gold; WPP35G is a Walter grade for coated carbide FAQ Which materials is this insert intended for? The ODHT060512-F57 WPP35G milling insert is specified for machining steels (ISO group P), covering unalloyed and alloyed steels as described in the grade documentation. What advantages does the octagonal form and corner radius provide? The octagonal form increases available indexable edges per insert to reduce tooling cost per edge, while the 1.2 mm corner radius adds edge strength and helps maintain surface finish under load when using the ODHT060512-F57 WPP35G in milling operations. How does the F57 chipbreaker affect machining? The F57 chipbreaker on the ODHT060512-F57 WPP35G promotes controlled chip formation and evacuation, improving process security and enabling consistent cutting conditions in steel machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools: Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanation. There is no connection between our company and the named brands. The offered article is original, brand-new merchandise from the manufacturer.
ODHT060512-F57 WSP45G Wendeplatten - Walter Tools
Combine the high process security of the Tiger·tec Gold grade with robust geometry and reliable chip control to keep milling operations productive and predictable; order directly via Metav Werkzeuge or consult our specialists for application‑specific advice. ODHT060512-F57 WSP45G — Milling indexable insert (Tiger·tec Gold), 15° relief, 1.2 mm corner radius, Walter Tools The ODHT060512-F57 WSP45G is a coated carbide milling insert engineered for demanding milling of steel, stainless steel and heat‑resistant alloys in productive machining environments. Tiger·tec Gold PVD coating for stability Versatile for steel, stainless and superalloys 15° relief angle for reduced rubbing 1.2 mm corner radius for robust edge life Consistent productivity from the Tiger·tec Gold coating The Tiger·tec Gold coating and the WSP45G grade deliver a balance of wear resistance and edge stability that supports longer tool life and predictable machining cycles. As a coated carbide solution, the insert tolerates the thermal and mechanical loads typical of milling steels and superalloys, which reduces the frequency of tool changes and contributes directly to higher overall equipment effectiveness. The surface finish and coating technology assist in maintaining a consistent cutting edge under varying cutting conditions, improving throughput without sacrificing reliability. Secure chip control and material versatility for diverse workpieces Marked for P / M / S applications, the insert is suitable for unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys/titanium. The F57 chipbreaker is tuned to promote reliable chip formation across these groups, lowering the risk of built‑up edge and enabling safer evacuation in interrupted cuts. For operations that demand flexibility—switching between roughing and semi‑finishing or handling mixed batches—the adaptable grade minimises process setup time and helps maintain dimensional stability throughout runs. Geometry engineered to extend edge life and reduce rework With a 15° relief angle and a 1.2 mm corner radius, the octagonal plate shape provides a stable cutting geometry that resists chipping while offering predictable flank wear progression. This geometry reduces rubbing on the flank face and distributes cutting forces across a larger contact zone, which supports longer life in both continuous and interrupted milling. The robust corner radius is particularly beneficial when encountering intermittent engagement or slight run‑out, lowering the chance of premature edge failure and consequent rework. Practical process recommendations to enhance productivity The ODHT060512‑F57 WSP45G insert performs best when paired with a rigid toolholder and stable workholding to exploit its process security advantages. The combination of the Tiger·tec Gold coating and the F57 chipbreaker supports higher cutting speeds in many steels and provides improved surface integrity in finishing passes. For stainless steel and superalloys, moderate feeds and careful cooling strategy will preserve the cutting edge and maintain surface quality. Overall, the insert is designed to reduce downtime, simplify grade selection and support consistent results across mixed manufacturing tasks. Contact Metav Werkzeuge for tailored application advice and to source Walter Tools Tiger·tec Gold inserts for optimised process security — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: ODHT060512-F57-WSP45G-WALTER Article designation: ODHT060512-F57 WSP45G Product type: Fräswendeschneidplatte Series: Tiger-tec Gold Grade: WSP45G Facts Relief angle: 15° Corner radius: 1.2 mm Plate form: octagonal Plate size: 06 Plate thickness: 05 Chipbreaker: F57 Tolerance class: H Execution: T Special features Coating: Tiger·tec Gold (PVD) Material compatibility: P / M / S (steel, stainless steel, superalloys/titanium) Carbide: coated cemented carbide Application: milling operations requiring robust edge life and chip control Brand: Walter Tools FAQ Which materials are best machined with this insert? The ODHT060512‑F57 WSP45G is intended for P / M / S groups; it handles steel, stainless steel and heat‑resistant superalloys with reliable chip control thanks to the Tiger·tec Gold coating. What does the F57 chipbreaker achieve? The F57 chipbreaker on the ODHT060512‑F57 WSP45G supports consistent chip formation and evacuation, especially useful in mixed‑material production where stable chips reduce downtime and clamp contamination. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius on this insert increases edge robustness, lowering the risk of chipping during interrupted cuts and improving durability for medium‑ to heavy‑duty milling operations. Is this insert suitable for finishing and roughing? Yes, the ODHT060512‑F57 WSP45G offers a balance between wear resistance and toughness that makes it suitable for both roughing and semi‑finishing applications, provided the cutting parameters are adjusted to the workpiece material. Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, factory‑new merchandise of the manufacturer. The Walter AG (brand: Walter Tools) with headquarters in Tübingen is part of the Sandvik group.
ODHT0605ZZN-F57 WKP25S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger‑tec Silver coating and the WKP25S grade for stable, productive machining of steel and cast iron; the octagonal geometry and F57 chipformer support reliable chip control and economical indexing. Order or request application advice via Metav Werkzeuge for precise process integration. ODHT0605ZZN-F57 WKP25S indexable milling insert — Walter Tools, Tiger‑tec Silver, 15° clearance The ODHT0605ZZN-F57 WKP25S is an indexable milling insert designed for productive finishing and roughing operations on steel and cast iron, featuring a coated carbide grade within the Tiger‑tec Silver family. Tiger‑tec Silver coating technology Optimised chip control F57 Suitable for steel and cast iron Octagonal form for multiple indexing positions Increased throughput thanks to Tiger‑tec Silver and WKP25S The combination of Tiger‑tec Silver surface technology with the WKP25S coated carbide grade delivers enhanced wear resistance and a stable cutting edge, which together reduce the need for unplanned tool changes. This engineered coating minimises adhesive and abrasive wear during the high temperatures typical of machining steel and cast iron, helping to keep cycle times predictable and production flow continuous. The result is measurable productivity gains where consistent tool life is critical. Predictable chip formation for stable machining and surface quality The F57 chipformer is designed to control chip shape and evacuation, improving process stability in interrupted cuts and mixed-material batches. Better chip control reduces the risk of re-cutting and tool damage, which contributes to consistent surface quality and fewer rejects. For shops that alternate between heavier roughing and lighter finishing passes, this insert maintains performance across varying cutting conditions. Economical indexing and geometry that supports uptime The octagonal plate form offers multiple indexing positions for extended usage of each insert, increasing cost-efficiency per cutting edge while reducing downtime for index changes. The 15° clearance provides a balanced approach between strength at the cutting edge and clearance against the workpiece, supporting both side milling and light shoulder operations. Compact dimensions and a robust execution make the insert suitable for modular cutters and stable toolholders, improving overall process security. Application reliability and shop-floor guidance Classified for the ISO material groups P (steel) and K (cast iron), the insert is manufactured to tolerance class H and benefits from Walter Tools’ quality standards within the Tiger‑tec Silver series. For practical selection, match the insert geometry and the WKP25S grade to the specific workpiece material and cutting data; this combination is especially suitable where a balance of edge life and surface finish is required. For tailored recommendations, consider cutter diameter, spindle power and coolant strategy to unlock the insert’s full potential. Contact Metav Werkzeuge for application support, availability and tailored cutter recommendations — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical data Article number: ODHT0605ZZN-F57-WKP25S-WALTER SKU / Label: Fräswendeschneidplatte ODHT0605ZZN-F57 WKP25S Walter Tools Facts Plate size: 06 Plate thickness: 05 Free angle: 15° Tolerance class: H Special features Series: Tiger‑tec Silver Grade: WKP25S (coated carbide) Chipformer: F57 Shape: Octagonal Material suitability: P (steel), K (cast iron) Execution: T FAQ What materials is this insert suitable for? The ODHT0605ZZN-F57 WKP25S indexable milling insert from Walter Tools is specified for ISO groups P and K, meaning it is suitable for steel and cast iron applications. How does the Tiger‑tec Silver series improve performance? Tiger‑tec Silver coating on the WKP25S grade reduces adhesive and abrasive wear, extending edge life and supporting higher productivity in the Walter Tools insert family. What benefit does the F57 chipformer provide? The F57 chipformer improves chip control, leading to more stable machining and consistent surface finishes when using this Walter Tools milling insert. Is the octagonal geometry advantageous for production runs? The octagonal form provides multiple indexing positions for economical reuse of the cutting edges, reducing changeover frequency and supporting continuous production with the Walter Tools insert. Which tolerance and execution should be expected? The insert is produced to tolerance class H with execution T, ensuring dimensional reliability for precise tool assemblies. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the brands mentioned. The item offered is original factory‑new goods of the manufacturer.
ODHT0605ZZN-F57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WKP35G carbide grade for reliable productivity and extended tool life; the octagonal 06 insert with a 15° relief and F57 chipbreaker ensures stable chip control when machining steel and cast iron. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. ODHT0605ZZN-F57 WKP35G – Milling indexable insert by Walter Tools, Tiger‑tec Gold for steel & cast iron (15°) ODHT0605ZZN-F57 WKP35G is a high-performance milling insert designed for versatile face and shoulder milling operations in steel and cast iron using a robust coated‑carbide grade. Tiger‑tec Gold coating for long tool life WKP35G: robust coated carbide grade 15° relief for versatile milling Octagonal 06 insert with F57 chipbreaker Consistent productivity through advanced coating and grade The combination of the Tiger‑tec Gold coating and the WKP35G coated carbide grade delivers a balance of wear resistance and edge robustness that reduces downtime. The advanced coating lowers flank wear under the thermal conditions typical for machining ISO P (steel) and ISO K (cast iron), which improves tool life and keeps part tolerances stable over longer runs. This translates into fewer indexings and predictable process windows, supporting improved machine utilisation and a better cost‑per‑part ratio. Geometry and chip control for secure machining The octagonal size 06 insert form, together with the F57 chipbreaker and a 15° relief angle, provides reliable chip formation and evacuation in interrupted and continuous cuts. The insert geometry is optimised for secure seating and even loading, which reduces vibration and supports consistent surface finish. For users less familiar with insert technology: the chipbreaker shapes and directs chips to prevent clogging and protect the cutting edge, making the tool especially suitable for mixed production environments that process both cast iron and a variety of steels. Application focus and practical advantages on the shop floor Engineered for common milling operations in steel and cast iron, this insert offers a practical solution where productivity and repeatability matter. The coated‑carbide composition improves resistance to abrasive wear when machining grey cast iron and maintains edge integrity in alloyed steels. As a result, operators benefit from predictable regrinding intervals and lower overall tooling costs. For integrators and production planners, the insert supports stable process parameters and simpler tool planning due to its broad material coverage. Contact Metav Werkzeuge for tailored machining parameters or ordering support for the Walter Tools Tiger‑tec Gold WKP35G insert; our consultants assist with cutting data and application selection to ensure optimal performance Technical Data Article number: ODHT0605ZZN-F57-WKP35G-WALTER Label: Fräswendeschneidplatte ODHT0605ZZN-F57 WKP35G Walter Tools Manufacturer: Walter Tools Facts Relief angle: 15° Insert size: 06 Thickness: 05 Tolerance class: H Special features Tiger‑tec Gold series WKP35G coated carbide grade Material suitability: P / K (steel and cast iron) Chipbreaker: F57 Insert form: octagonal Execution: T Product type: milling indexable insert FAQ What materials is this insert suitable for? The ODHT0605ZZN-F57 WKP35G insert from Walter Tools is designed for ISO P (steel) and ISO K (cast iron) applications, reflecting the WKP35G grade and Tiger‑tec Gold coating. How does the Tiger‑tec Gold coating benefit machining? The Tiger‑tec Gold coating on the WKP35G grade reduces abrasive and thermal wear, improving tool life and enabling more consistent cutting performance when milling steels and cast irons. Which chipbreaker should be expected and what is its effect? This insert features the F57 chipbreaker, which promotes controlled fragmentation and reliable chip evacuation, reducing the risk of chip entanglement and helping to protect the cutting edge. Is the insert suitable for interrupted cuts and heavy engagement? The octagonal geometry and robust WKP35G grade make the insert well suited for interrupted milling and moderate heavy engagements, providing edge security and reduced chipping. How is the insert referenced for ordering and identification? Order using the SKU ODHT0605ZZN-F57-WKP35G-WALTER or the ISO designation ODHT0605ZZN-F57 WKP35G to ensure the correct Tiger‑tec Gold coated insert is supplied. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are cited for explanatory purposes only; no affiliation between our company and the named brands is implied. The offered item is original factory‑new goods from the manufacturer.
ODHT0605ZZN-F57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP35S grade for extended tool life and reliable chip control; the octagonal form and 15° relief angle ensure versatile indexing and consistent milling performance. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. ODHT0605ZZN-F57 WKP35S milling indexable insert – Tiger·tec Silver, for steel and cast iron | Walter Tools The ODHT0605ZZN-F57 WKP35S is a coated carbide milling insert designed for productive machining of steel and cast iron, combining a controlled-chip geometry with Tiger·tec Silver surface technology Tiger·tec Silver coating for long tool life Optimised chipbreaker F57 for stable chip control 15° relief angle for universal milling Octagonal insert form, size 06 for versatile indexing Greater productivity through material-adapted grade and coating The combination of the WKP35S grade and the Tiger·tec Silver coating is designed to improve process stability when machining steel and cast iron (ISO groups P and K). The coated carbide composition provides resistance to abrasive wear and helps maintain a stable cutting edge under the typical heat and chip-formation conditions encountered with these materials. This results in fewer tool changes and more predictable tool life, which supports cost-efficient production cycles and reduces unexpected downtime. The designation is suitable for a broad range of general milling applications where consistent performance and predictable wear behaviour are prioritised. Reliable chip management and geometry for consistent surface quality The insert’s optimised chipbreaker F57 and octagonal format support stable chip control and versatile indexing. The 15° relief angle contributes to controlled cutting forces and improved entry behaviour in interrupted cuts. Together these geometric characteristics reduce vibration and help achieve a repeatable surface finish with lower burr formation. The octagonal geometry increases the number of usable edges per insert, promoting economical use of the cutting material and simplifying inventory management for batch production or versatile job-shop work. Integration into workflows and practical application guidance With tolerance class H and the design features of the Tiger·tec Silver series, the insert is intended for integration into standard milling tool systems that accept the ODHT geometry. The product is supplied in the ODHT0605ZZN-F57 designation, allowing direct matching with compatible toolholders and clamping systems. For choice of cutting parameters, the grade is optimised for general steel and cast-iron conditions; conservative feeds and speeds may be used initially, then adjusted according to observed tool life and surface result. For process-critical or novel material mixes, consult technical advisors to align insert selection with machine capability and component tolerances. For procurement and application support with Walter Tools' Tiger·tec Silver inserts, contact Metav Werkzeuge for tailored advice and supply coordination: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: ODHT0605ZZN-F57-WKP35S-WALTER Product label: Fräswendeschneidplatte ODHT0605ZZN-F57 WKP35S Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP35S Facts Relief angle: 15° Insert size: 06 Plate thickness: 05 Tolerance class: H Special features Chipbreaker: F57 Shape: octagonal Material suitability: P / K (steel and cast iron) Execution: T ISO designation: ODHT0605ZZN-F57 WKP35S Designation without grade: ODHT0605ZZN-F57 FAQ Which materials is this insert optimised for? The ODHT0605ZZN-F57 WKP35S insert is optimised for steel and cast iron applications (ISO groups P and K) in accordance with the Tiger·tec Silver grade characteristics. What does the WKP35S grade offer compared with other grades? WKP35S, as used on this Walter Tools insert, provides a coated carbide combination focused on wear resistance and stable chip formation for steel and cast iron machining. How does the F57 chipbreaker influence machining? The F57 chipbreaker promotes controlled chip splitting and evacuation, which improves process reliability and surface quality when machining the recommended materials. Is the insert compatible with standard ODHT toolholders? The insert uses the ODHT0605 geometry; it is intended for holders and clamping systems designed for the ODHT insert family and size 06 geometry. Does this insert suit high-speed machining? The Tiger·tec Silver series and WKP35S grade are engineered for productive machining; actual suitability for high-speed conditions should be verified against machine capabilities and cutting parameter recommendations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade names are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
ODHT0605ZZN-F57 WPP35G Wendeplatten - Walter Tools
Take advantage of the WPP35G grade and Tiger‑tec Gold coating for sustained tool life and reliable chip control in steel machining; the octagonal form and 15° free angle combine to reduce vibration and secure repeatable finishes. Order the insert via Metav Werkzeuge or consult the technical team for application-specific recommendations. ODHT0605ZZN-F57 WPP35G milling indexable insert — Tiger‑tec Gold coated, for steel | Walter Tools A ODHT0605ZZN-F57 WPP35G milling insert designed for productive roughing and semi-finishing of steel, combining a coated carbide grade with a dedicated chipbreaker for stable machining. Tiger‑tec Gold coated grade WPP35G Designed for steel (ISO group P) Octagonal insert for multiple cutting edges 15° free angle for reduced cutting forces Longer tool life and predictable performance for steel machining The combination of the Tiger‑tec Gold coating with the WPP35G carbide grade delivers enhanced wear resistance and thermal stability during heavy-duty milling of steel. The coating acts as a thermal barrier and reduces adhesion of workpiece material to the cutting edge, which extends the interval between indexing or replacement and supports a more consistent surface finish. For production environments this means fewer interruptions, improved uptime and a clearer basis for planning tool change schedules. Geometry that stabilises cuts and improves chip control An octagonal plate form paired with the F57 chipbreaker provides reliable chip control and allows multiple indexed edges per insert, improving economy per cutting edge. The 15° free angle reduces radial cutting forces and helps to lower vibration and tool deflection, particularly in interrupted cuts or heavy engagement. These geometric choices translate into more consistent dimensional accuracy and repeatable component quality across batches. Process benefits and integration into machining strategies The insert’s specification supports robust roughing and flexible semi‑finishing workflows in mixed‑batch production. The coated carbide grade is tuned for the heat and chip formation typical of the P material group, enabling higher metal removal rates while maintaining edge integrity. For process setup, the insert is compatible with standard toolholders that accept the ODHT series geometry, and its repeatable performance facilitates predictable cycle times and cost calculations per part. For application advice or cutting-parameter recommendations, the Metav Werkzeuge technical consultants can provide tailored guidance. For tailored tooling advice or to request this Walter Tools ODHT0605ZZN-F57 WPP35G insert for steel applications, contact Metav Werkzeuge for application support and ordering details at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ODHT0605ZZN-F57-WPP35G-WALTER Description: Fräswendeschneidplatte ODHT0605ZZN-F57 WPP35G Walter Tools Manufacturer: Walter Tools Core specifications Grade/series: WPP35G, Tiger‑tec Gold Suitable material group: P (steel) Free angle: 15° Plate form: Octagonal (Achteck) Plate size: 06 Plate thickness: 05 Chipbreaker: F57 Tolerance class: H Execution: T Design and special features Coated carbide cutting material Optimised for stable chip formation and wear resistance Multiple indexable cutting edges due to octagonal shape Tailored for roughing and semi‑finishing in steel Walter Tools product family: Tiger‑tec Gold FAQ Is this insert suitable for stainless or alloyed steels? The insert is specified for the ISO material group P (steel); the WPP35G grade in the Tiger‑tec Gold series is optimised for unalloyed and alloyed steels, while stainless variants may require alternative grades or geometries. How many cutting edges are available per insert? The octagonal shape provides multiple indexable edges; the exact number of usable edges depends on wear and the specific cutting conditions used with the ODHT0605ZZN-F57 insert. What is the primary advantage of the F57 chipbreaker? The F57 chipbreaker is designed to deliver controlled chip formation during heavy cuts in steel, reducing the risk of entangling chips and supporting consistent surface quality. Can this insert be used in existing ODHT toolholders? Yes, the ODHT0605ZZN-F57 insert follows the ODHT series geometry and is intended for compatible toolholders that accept this insert designation. Manufacturer/Responsible: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for descriptive purposes only and do not imply any affiliation or endorsement by the respective trademark owners. The offered article is original and brand‑new from the manufacturer.
ODHT0605ZZN-F57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold surface technology, the WSM35G grade and the octagonal 15° relief geometry for stable chip formation and longer tool life when machining stainless steel and heat‑resistant alloys; order the ODHT0605ZZN‑F57 WSM35G milling indexable insert directly via Metav Werkzeuge or ask our consultants for technical advice. ODHT0605ZZN-F57 WSM35G milling indexable insert — Tiger‑tec Gold, 15° relief (Walter Tools) ODHT0605ZZN‑F57 WSM35G is a Tiger‑tec Gold coated milling indexable insert designed for demanding roughing and semi‑finishing operations in stainless steel and superalloys, delivering consistent edge stability and chip control Tiger‑tec Gold coating for durable edges Optimised F57 chipbreaker for secure chip control Octagonal form with 15° relief angle WSM35G grade for stainless steel and superalloys Higher productivity through proven coating and grade The combination of Tiger‑tec Gold surface technology and the WSM35G carbide grade provides a balanced compromise between wear resistance and edge toughness. This results in noticeably improved tool life and more predictable performance under thermal and mechanical load. The insert is produced as coated carbide, which reduces flank wear and supports repeatable machining results. For production environments where uptime and repeatable component quality matter, the measured advantages translate directly into fewer tool changes and steadier cycle times. Reliable chip control and secure cutting when machining challenging alloys Materials in groups S and M are demanding: heat builds up quickly, and the cutting edge is exposed to adhesive wear and high mechanical stress. The ODHT0605ZZN‑F57 WSM35G insert, equipped with the F57 chipbreaker, promotes stable chip formation and evacuation even under heavy cuts. This reduces the risk of built‑up edge and uneven surface finish when working with stainless steel and heat‑resistant superalloys or titanium. The technical design focuses on preventing common failure modes, translating into fewer rejects and more consistent part quality. Geometry engineered to reduce downtime and maintain surface quality The octagonal form combined with a 15° relief angle and a compact size code ensures multiple usable cutting edges and a reliable seating in standard milling toolholders. The insert’s tolerance class H and clearly defined size and thickness codes support accurate clamping and repeatable positioning, which in turn secures surface finish consistency between inserts. The design therefore reduces setup variability and shortens mean time to repair: fewer interruptions, predictable tool budgets and sustained shop‑floor productivity. Practical applications and integration into production flows This insert is suitable for high‑load milling operations in sectors such as aerospace, energy and medical component production where stainless steel and superalloys are commonly used. The compact form factor and robust grade make the insert a good choice for both roughing passes and controlled semi‑finishing, depending on cutter geometry and machining parameters. For optimisation of feeds and speeds or to confirm compatibility with specific toolholders and cutters, Metav Werkzeuge can provide supplementary technical information and application consultancy. Choose Walter Tools Tiger‑tec Gold inserts like the ODHT0605ZZN‑F57 WSM35G for reliable machining of stainless steel and demanding alloys — contact Metav Werkzeuge for availability, sample orders and application support. Technical data Article number: ODHT0605ZZN‑F57‑WSM35G‑WALTER Designation: ODHT0605ZZN‑F57 WSM35G Product type: milling indexable insert Series: Tiger‑tec Gold Grade: WSM35G Coating / substrate: coated carbide Form: octagonal Relief angle: 15° Chipbreaker: F57 Tolerance class: H Execution: T Applicable material groups: S / M Core specifications Size code: 06 Thickness code: 05 Relief angle: 15° Tolerance class: H SKU: ODHT0605ZZN‑F57‑WSM35G‑WALTER Features & suitability Tiger‑tec Gold surface technology WSM35G grade — for tough, heat‑loaded machining Coated carbide construction Suitable for stainless steel Suitable for heat‑resistant superalloys and titanium Optimised F57 chipbreaker for secure chip control FAQ What materials is this insert suitable for? The ODHT0605ZZN‑F57 WSM35G insert is designed primarily for stainless steel and for heat‑resistant superalloys and titanium, thanks to the WSM35G grade and Tiger‑tec Gold coating that improve edge stability under thermal load. How does the chipbreaker F57 improve machining? The F57 chipbreaker on this Walter Tools insert promotes compact, controllable chips and efficient evacuation, which reduces the risk of built‑up edge and supports consistent surface finish when milling demanding materials. How many usable edges does the octagonal form offer? The octagonal form provides multiple indexable cutting edges per insert, allowing efficient edge rotation and reduced downtime for tool changes while maintaining repeatable clamping accuracy. Is this insert suitable for both roughing and semi‑finishing? Yes, with appropriate cutter geometry and machining parameters the ODHT0605ZZN‑F57 WSM35G can be used for heavy roughing and for controlled semi‑finishing passes where a balance of material removal and surface quality is required. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only; there is no affiliation between our company and the brands. The offered item is an original, factory‑new product from the named manufacturer (Walter Tools).
ODHT0605ZZN-F57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and a robust F57 chipbreaker for consistent tool life and efficient metal removal; order the ODHT0605ZZN-F57 WSP45G directly via Metav Werkzeuge or consult the technical team for process optimisation. ODHT0605ZZN-F57 WSP45G milling indexable insert — Tiger‑tec Gold, octagonal design, Walter Tools A high‑performance insert designed for demanding milling applications, the ODHT0605ZZN-F57 WSP45G offers a versatile PVD grade for steels, stainless steels and heat‑resistant alloys. Tiger‑tec Gold PVD coating Suitable for steel, stainless steel and titanium Octagonal shape for multiple cutting edges Stable chip control with F57 breaker Maximised productivity through advanced coating and grade The combination of the Tiger‑tec Gold coating with the WSP45G carbide grade provides a balance of toughness and thermal stability that benefits continuous and interrupted milling. The PVD technology improves resistance to wear and reduces flank abrasion, which translates into longer tool life and fewer tool changes. Classified for P / M / S workpiece groups, the grade is optimised for the heat and chip characteristics encountered when machining unalloyed and alloyed steels, stainless steel and heat‑resistant superalloys or titanium, offering a reliable baseline for process planning and predictable productivity gains. Predictable chip management and economical edge utilisation The F57 chipbreaker has been developed to promote controlled chip formation across a range of feeds and depths of cut, supporting improved surface finish and reduced rework. The insert’s octagonal form delivers multiple usable cutting edges, increasing cost‑efficiency per insert and simplifying inventory management. With a relief angle of 15°, the geometry reduces rubbing at entry and maintains cutting‑edge stability during radial engagement. Together these features ensure the insert remains a dependable choice for both roughing and finishing passes in versatile milling setups. Practical machining guidance for consistent results Designed for standard toolholders and clamping systems, this indexable insert with plate size 06 and plate thickness 05 offers a compact, secure seating suited to a wide range of cutter bodies. The ODHT0605ZZN-F57 WSP45G is especially appropriate where a balance between edge stability and toughness is required, for example when alternating between roughing and semi‑finishing in mixed‑material production. For process reliability, match cutting data to the workpiece group (P, M or S), and consider coolant strategy and toolpath to exploit the coating’s heat resistance while ensuring efficient chip evacuation. For rapid availability and machining advice on the ODHT0605ZZN-F57 WSP45G from Walter Tools, contact Metav Werkzeuge for tailored recommendations and stock information: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: ODHT0605ZZN-F57-WSP45G-WALTER Description: Fräswendeschneidplatte / milling indexable insert ODHT0605ZZN-F57 WSP45G Manufacturer: Walter Tools Series / Grade: Tiger‑tec Gold / WSP45G Designation: ODHT0605ZZN-F57 Facts Free angle: 15° Plate size: 06 Plate thickness: 05 Tolerance class: H Special features Coating technology: Tiger‑tec Gold (PVD) Chipbreaker: F57 Shape: Octagonal Material suitability: Steel, stainless steel, superalloys and titanium Grade type: Coated carbide (WSP45G) Execution: T FAQ Which materials can this insert machine effectively? The ODHT0605ZZN-F57 WSP45G insert from Walter Tools is specified for the P / M / S material groups, making it suitable for steel, stainless steel and heat‑resistant superalloys including titanium. What advantages does the Tiger‑tec Gold coating bring? Tiger‑tec Gold on the WSP45G grade increases wear resistance and thermal stability on the ODHT0605ZZN-F57 WSP45G insert, which supports longer tool life and dependable performance in mixed‑material milling. How does the F57 chipbreaker influence performance? The F57 chipbreaker of the ODHT0605ZZN-F57 WSP45G promotes controlled chip formation across varied feeds, improving evacuation and surface finish while reducing the risk of built‑up edge. How many cutting edges are available per insert? Thanks to the octagonal geometry, the ODHT0605ZZN-F57 WSP45G insert provides multiple indexable cutting edges, increasing cost efficiency by extending the usable life of each insert. Which cutter setups are recommended for this insert? The ODHT0605ZZN-F57 WSP45G is intended for conventional milling cutter bodies with secure clamping; match speeds and feeds to the P, M or S group and consider coolant to exploit the coating’s benefits. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Mention of brand names such as Walter Tools is for identification and explanation only; there is no affiliation between Metav Werkzeuge and the trademark owners. The offered article is original, factory‑new merchandise from the respective manufacturer.
ODHT0605ZZN-G77 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the WSP45G grade for sustained productivity and reliable chip control in demanding milling operations; order the insert through Metav Werkzeuge or consult the team for application support and availability. ODHT0605ZZN-G77 WSP45G indexable milling insert — Tiger·tec Gold, Walter Tools A ODHT0605ZZN-G77 WSP45G indexable milling insert engineered for versatile face and slot milling of steels, stainless steels and heat‑resistant alloys in demanding production environments Tiger·tec Gold PVD coating for high productivity Versatile for steel, stainless steel and superalloys 15° clearance angle for secure chip control Octagonal 06 insert for economical indexing Higher productivity through advanced grade and coating The combination of the Tiger·tec Gold coating and the WSP45G grade delivers a balance of wear resistance and edge toughness that supports longer tool life and more consistent cycle times. As a PVD-coated carbide solution, the insert resists abrasive wear while maintaining edge stability under the thermal loads typical for machining steel, stainless steel and superalloys. For production managers this means fewer tool changes, more reliable surface finishes and a measurable improvement in process efficiency; the coated grade is particularly suited to milling applications where both tool life and secure chip formation are decisive. Reliable chip control and versatile geometry for milling tasks The integrated G77 chipbreaker and the 15° clearance angle promote effective chip formation and evacuation, reducing the risk of built-up edge and minimising rework. The octagonal insert shape with the standard 06 size enables multiple indexings, offering a low cost per cutting edge and simplified inventory handling. The moderate insert thickness 05 and the specified tolerance class support stable clamping and predictable cutting behaviour, which helps planners and operators set feeds and speeds with confidence even in mixed‑material production runs. Seamless integration into production and application support Designed as an indexable milling insert, this item suits face, shoulder and roughing/finishing operations where a combination of robustness and surface quality is required. The grade’s suitability for P/M/S material groups ensures flexibility across part families, while the insert form and chipbreaker simplify process setup. Application advice and adaptation to specific machining centres are readily available; for tailored recommendations Metav Werkzeuge can assist with cutting data and inventory planning, helping to shorten ramp-up times and secure consistent results on the shop floor. For dependable high‑performance milling choose the Walter Tools ODHT0605ZZN-G77 WSP45G insert and contact Metav Werkzeuge for detailed cutting data, availability and application advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: ODHT0605ZZN-G77-WSP45G-WALTER Article designation: ODHT0605ZZN-G77 WSP45G Product type: indexable milling insert Brand: Walter Tools Facts Clearance angle: 15° Insert size: 06 Thickness: 05 Tolerance class: H Special features Series: Tiger·tec Gold Grade: WSP45G (P / M / S) Chipbreaker: G77 Insert form: octagonal Coated carbide grade for milling Execution: T FAQ What materials can be machined with this insert? The ODHT0605ZZN-G77 WSP45G insert is specified for machining steel, stainless steel and heat‑resistant superalloys/titanium (P/M/S), offering versatility across typical workshop and production applications. How does the G77 chipbreaker influence performance? The G77 chipbreaker is designed to support secure chip formation and efficient evacuation, improving surface finish and reducing the likelihood of built‑up edge during continuous milling operations with the WSP45G grade. Is this insert suitable for finishing as well as roughing? Yes; the coated grade and the insert geometry deliver a combination of edge stability and wear resistance that makes the insert suitable for both roughing and finishing passes when process parameters are set accordingly. How many indexable positions are available on the insert? The octagonal shape provides multiple indexable cutting edges, enabling economical edge use and straightforward replacement strategies in production environments. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand Walter Tools) is one of the world’s leading manufacturers of precision cutting tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners and are mentioned for explanation only. The offered item is an original, brand‑new product from the manufacturer.
ODHT0605ZZN-G88 WK10 T Wendeplatten - Walter Tools
Take advantage of the combination of WK10 uncoated cemented carbide, precise G88 chip control and a compact 15° relief for predictable edge life and efficient milling. The octagonal form provides versatile indexing; this results in reduced tool change time and steady productivity. Order the ODHT0605ZZN‑G88 WK10 directly via Metav Werkzeuge or ask the consultants for application advice. ODHT0605ZZN-G88 WK10 – milling indexable insert, octagonal, 15° relief | Walter Tools The ODHT0605ZZN-G88 WK10 is an octagonal milling indexable insert designed for stable chip formation and consistent edge performance in general milling operations Octagonal insert for flexible indexing 15° relief angle for reliable cutting engagement G88 chipbreaker for consistent chip control WK10 uncoated cemented carbide grade Consistent productivity through proven cutting geometry The octagonal shape and compact geometry deliver frequent indexing options without complex handling, supporting continuous operation and lower tool consumption. The combination of the G88 chipbreaker and the 15° relief angle produces controlled chip formation, which reduces vibration and helps achieve stable edge life. For production environments, this translates into fewer interruptions and a more predictable machining cycle time. The grade WK10 denotes an uncoated cemented carbide solution selected for general-purpose milling; specific workpiece suitability should be verified in the product matrix for best results. Reduced setup time and clear handling advantages Thanks to the insert’s standardised form factor and clearly defined seating, tool change and indexing are straightforward, helping to shorten fixture downtime. The octagonal contour offers multiple cutting edges from a single insert, making the component cost-effective in high‑mix, high‑throughput shops. The design emphasises straightforward handling and repeatable clamping, which together support consistent part quality and efficient shopfloor workflows. Practical guidance and terminology explained An indexable insert is a replaceable cutting tip that can be rotated or exchanged without replacing the whole tool body; using an insert such as this reduces waste and simplifies inventory. The designation includes the chipbreaker code G88 (geometry for chip control), a plate size code 06 and plate thickness 05, with tolerance class H indicating dimensional tolerance. Where material compatibility or cutting parameters are critical, consult the detailed product matrix or contact technical sales to align feed, speed and coolant strategy for the intended application. Choose Walter Tools' WK10 grade for reliable, general‑purpose milling and contact Metav Werkzeuge for procurement and technical support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: ODHT0605ZZN-G88-WK10-WALTER Designation: ODHT0605ZZN-G88 WK10 Product type: milling indexable insert Manufacturer: Walter Tools Facts Relief angle: 15° Plate size: 06 Plate thickness: 05 Tolerance class: H Special features Chipbreaker: G88 Grade: WK10 (uncoated cemented carbide) Form: octagonal Series: Walter Schneidstoffsorte - Serie offen Execution: T FAQ Is this insert coated or uncoated? The ODHT0605ZZN‑G88 WK10 is supplied as an uncoated cemented carbide insert in the WK10 grade, intended for general milling tasks. Which clamping or toolholders are compatible? Compatibility depends on the cutter body and seat type; the octagonal indexable insert fits standard indexable milling cutter systems designed for the ODHT form factor. Can this insert be used for stainless steel or hardened materials? Material suitability should be confirmed in the product matrix; the WK10 grade is an uncoated general‑purpose carbide, so verify specific application data before machining stainless steel or hardened workpieces. How does the G88 chipbreaker affect performance? The G88 chipbreaker is engineered for consistent chip control and reduced vibration, which supports more predictable edge life and part finish in interrupted and continuous cuts. What does the H tolerance class indicate? Tolerance class H refers to the manufacturing tolerance level of the insert and affects seat and clamping precision; ensure cutter body tolerance matches for accurate seating. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com