ODHT0605ZZN-G88 WXN15 Wendeplatten - Walter Tools
Benefit from the combination of a very sharp uncoated carbide grade, the optimised G88 chipbreaker and a 15° clearance angle for clean, burr‑free machining of non‑ferrous materials; order directly via Metav Werkzeuge or ask our consultants for tailored advice. ODHT0605ZZN-G88 WXN15 – milling indexable insert for non‑ferrous metals, 15° clearance | Walter Tools ODHT0605ZZN-G88 WXN15 is a milling indexable insert designed for precise, productive machining of aluminium and other non‑ferrous alloys Sharp uncoated carbide grade WXN15 Optimised G88 chipbreaker for non‑ferrous metals 15° clearance angle for secure cutting Octagonal form for multiple effective edges Precise performance for non‑ferrous components The combination of WXN15 as an uncoated carbide grade and the G88 chipbreaker is aimed specifically at NE‑materials such as aluminium, copper and brass. This geometry reduces material build‑up on the cutting edge and promotes short, controllable chips; the result is improved surface finish and reduced secondary operations. Machining performance is therefore enhanced through a tailored edge form rather than relying on coating alone. Predictable edge life and efficient indexability Designed with an octagonal form and multiple cutting edges, the insert delivers predictable edge changes and economical use of each indexable face. The 15° clearance angle supports a stable engagement with the workpiece, lowering the risk of rubbing and heat accumulation; in practice, this reduces the need for frequent regrinding and keeps machine uptime high. The insert is supplied in a tolerance class H to fit standard milling toolholders precisely. Chip control that protects productivity The G88 chipbreaker is engineered to break and evacuate swarf reliably during high‑feed or interrupted milling in non‑ferrous materials. Short chips minimise entanglement and toolholder loading, which supports uninterrupted production runs. For customers less familiar with chipbreaker terminology: this feature shapes the flow and breakage of chips to avoid long, stringy swarf that can damage surfaces or tools. Application‑focused choice for demanding workshops Where sharp edges and low friction are required, an uncoated carbide insert often outperforms coated variants because coatings can promote built‑up edge in soft metals. The Walter Tools series offers an industrially proven solution for tasks where clean cutting and excellent surface integrity are priorities. The insert is particularly suited to finishing and semi‑finishing operations on non‑ferrous components, offering a balance of precision and cost effectiveness. Contact Metav Werkzeuge for expert recommendations on Walter Tools inserts like the ODHT0605ZZN-G88 WXN15 and to match the correct toolholder and machining parameters for specific non‑ferrous applications — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: ODHT0605ZZN-G88-WXN15-WALTER Designation: ODHT0605ZZN-G88 WXN15 Manufacturer: Walter Tools Facts Clearance angle: 15° Plate size: 06 Plate thickness: 05 Tolerance class: H Special features Grade: WXN15 (uncoated carbide) Chipbreaker: G88 Plate form: octagonal Series: Walter N‑Sortensystem Material suitability: non‑ferrous metals (N) FAQ Which materials are best machined with this insert? The ODHT0605ZZN‑G88 WXN15 insert is designed primarily for non‑ferrous metals such as aluminium, copper and brass; the geometry and grade reduce material adhesion on the cutting edge. Is the insert coated or uncoated? This milling insert uses an uncoated carbide grade (WXN15), which is advantageous for achieving sharp edges and avoiding built‑up edge when machining soft, non‑ferrous alloys. How does the G88 chipbreaker improve performance? The G88 chipbreaker produces short, controlled chips that prevent long swarf, improving evacuation and protecting both workpiece and toolholder during continuous machining. How many effective cutting edges are available per insert? Thanks to the octagonal form, multiple effective edges are provided; each face can be indexed in sequence to extend usable life before replacement. What does tolerance class H indicate for tool mounting? Tolerance class H denotes a standardised dimension tolerance to ensure secure seating in compatible milling toolholders and consistent run‑out for precise machining. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; there is no affiliation between Metav Werkzeuge and the named brands. The item offered is original, brand‑new merchandise from the manufacturer.
ODHW050412-A57 WSN10 Wendeplatten - Walter Tools
Combining reliable cutting performance, a 15° relief angle and a 1.2 mm corner radius, this insert delivers productive milling with consistent chip control and long edge life; order the ODHW050412-A57 WSN10 insert directly via Metav Werkzeuge or request application advice from our consultants. ODHW050412-A57 WSN10 – milling indexable insert, 15° relief, A57 chipbreaker (Walter Tools) ODHW050412-A57 WSN10 is a milling indexable insert engineered for productive milling operations where repeatable chip formation and stable cutting edges are required Octagonal form for eight usable edges 15° relief angle for controlled engagement 1.2 mm corner radius for robust edge strength A57 chipbreaker for consistent chip control Consistent performance from the WSN10 grade The insert is manufactured in a coated cemented carbide grade identified as WSN10, a Walter material family intended to balance wear resistance and edge stability. The coating and substrate combination supports repeatable cutting performance and reduced tool changes, which contributes to higher process efficiency. As the WSN10 designation indicates a specific Walter grade, material suitability should be verified against the official product matrix to ensure optimal selection for the intended milling task. Geometry designed for durability and surface quality An octagonal form offers multiple cutting edges per insert, giving economical use of each indexable element. The 15° relief angle reduces cutting forces at entry and stabilises tool engagement, while the 1.2 mm corner radius increases edge strength and contributes to improved surface finish on the workpiece. The integrated A57 chipbreaker optimises chip segmentation and evacuation, reducing risk of re-cutting chips and helping to maintain consistent surface integrity during continuous milling. Practical application advice and integration into production The insert suits a variety of milling operations where reliable edge life and controlled chips are priorities; check the detailed product matrix to confirm compatibility with specific materials. The format and designation (ODHW050412-A57 WSN10) simplify tool management and spare-part identification in toolrooms. For customers seeking predictable cycle times and fewer interruptions for tool replacement, the combination of geometry and grade supports efficient workflows and predictable maintenance intervals. For reliable milling results with the Walter Tools WSN10 grade, contact Metav Werkzeuge for tailored application recommendations or to place an order via Metav Werkzeuge. Technical data Article number: ODHW050412-A57-WSN10-WALTER Designation: ODHW050412-A57 WSN10 Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 1.2 mm Insert size: 05 Thickness designation: 04 Tolerance class: H Special features Coating: coated cemented carbide Chipbreaker: A57 Form: octagon Grade/series: WSN10 / Walter Schneidstoffsorte - Serie offen Execution: W Material designation: catalogue-dependent FAQ Which milling tasks is this insert intended for? The ODHW050412-A57 WSN10 insert is intended for general milling operations that prioritise stable chip formation and long edge life; specific material suitability should be confirmed in the Walter product matrix. How does the A57 chipbreaker influence machining? The A57 chipbreaker promotes consistent chip segmentation and evacuation, improving process stability and helping to protect the cutting edge of the ODHW050412-A57 WSN10 insert for Walter Tools. How many cutting edges are available per insert? The octagonal geometry provides eight usable edges, enabling economical indexing and consistent performance over multiple repositions. What does the WSN10 designation mean? WSN10 denotes a Walter coated cemented carbide grade tailored for balanced wear resistance and edge stability; detailed application limits are available in the official Walter product matrix. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
ODHW0504ZZN-A57 WAK15 Wendeplatten - Walter Tools
Combine targeted aluminium performance with the WAK15 uncoated carbide grade and a 15° clearance angle for low-adhesion, high-quality milling of non‑ferrous metals; order the ODHW0504ZZN-A57 WAK15 directly via Metav Werkzeuge or contact our consultants for tailored cutting data. ODHW0504ZZN-A57 WAK15 milling indexable insert — 15° clearance, octagonal, Walter Tools The ODHW0504ZZN-A57 WAK15 is a milling indexable insert optimised for aluminium and other non‑ferrous metals, offering a sharp edge geometry and chip control designed to reduce built-up edge and improve surface quality. Walter N-series uncoated carbide Optimised for aluminium and non‑ferrous metals 15° clearance angle for reduced adhesion Octagonal form for multiple indexable edges Faster, cleaner milling of non‑ferrous materials The octagonal insert form paired with the WAK15 uncoated grade enables economical indexable use while maintaining a very sharp cutting edge. In practice this means more consistent cut quality when machining aluminium and other N‑group materials, as the geometry reduces friction and minimises material sticking. The result is quicker machining cycles and fewer interruptions for edge cleaning, supporting higher throughput in repetitive milling operations. Predictable chip behaviour and improved surface finish The specified A57 chipbreaker and the insert’s geometry promote controlled chip formation and evacuation, which directly benefits surface integrity on delicate workpieces. For non‑ferrous machining, controlled chips prevent scratching and edge build‑up, delivering a superior surface finish and reduced secondary operations. The combination of chip control and sharp edge technology makes the insert particularly suitable for finishing and semi‑finishing passes where appearance and dimensional stability matter. Robust choice for production environments Built within the Walter N‑series philosophy, this uncoated carbide grade focuses on process reliability and broad material coverage within the N class. The 15° clearance angle supports clean shearing and reduces rubbing at the flank, which extends the effective life of each indexable edge when compared with blunt geometries. This reliability translates to predictable tool change intervals and stable cycle times, aiding production planning and cost forecasting. Simple integration and economical use The ODHW0504ZZN-A57 WAK15 insert fits standard indexable milling setups and, thanks to its octagonal shape, offers multiple usable edges per insert for a low cost per edge. Its specification is clear: uncoated WAK15 grade, octagonal form and A57 chipbreaker — essentials that simplify tooling selection for machining aluminium and similar non‑ferrous alloys. Operators benefit from straightforward tool data, and planners benefit from lower inventory complexity and better tool‑life predictability. Discuss project requirements with Metav Werkzeuge for the Walter Tools ODHW0504ZZN-A57 WAK15 — expert cutting data and application advice available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ODHW0504ZZN-A57-WAK15-WALTER Designation: ODHW0504ZZN-A57 WAK15 Product type: Milling indexable insert Manufacturer: Walter Tools Facts Clearance angle: 15° Insert size code: 05 Insert thickness code: 04 Tolerance class: H Chipbreaker: A57 Special features Series: Walter N‑Sortensystem Grade: WAK15 (uncoated carbide) Form: Octagonal Material group: N (non‑ferrous metals) Intended application: Aluminium and other N‑group materials FAQ Is this insert suitable for machining aluminium? The ODHW0504ZZN-A57 WAK15 is specifically designed for aluminium and other non‑ferrous metals, using a sharp edge geometry and chipbreaker A57 to minimise adhesion and improve surface quality. Does the insert require a coating for non‑ferrous work? The WAK15 grade is an uncoated carbide formulated for non‑ferrous machining where a sharp, low‑friction cutting edge is preferred over coated grades. What advantage does the 15° clearance angle provide? A 15° clearance angle reduces rubbing on the flank, promoting clean shearing and helping to prevent built‑up edge when milling soft, ductile materials such as aluminium. Is the form compatible with standard milling holders? The ODHW0504ZZN-A57 WAK15 follows common indexable insert conventions; compatibility depends on the specific holder system used, but the octagonal form offers multiple indexable edges for economical usage. What material class does this insert belong to? This insert is in the Walter N‑series and is intended for the N material group, which covers non‑ferrous metals like aluminium, copper and brass Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and brand names mentioned are the property of their respective owners. The referenced brand Walter Tools is used solely for product identification and description. The offered item is an original, factory‑new product of the manufacturer.
ODHW0504ZZN-A57 WKP25S Wendeplatten - Walter Tools
The Tiger‑tec Silver coating and WKP25S grade combine to provide high wear resistance and consistent chip control for machining steel and cast iron; the octagonal form and 15° clearance angle enable multiple indexes and stable cutting. Order directly via Metav Werkzeuge or consult our specialists for optimal tooling strategies. ODHW0504ZZN-A57 WKP25S milling indexable insert (Tiger‑tec Silver, for steel & cast iron) — Walter Tools A versatile ODHW0504ZZN-A57 WKP25S milling indexable insert engineered for productive face and peripheral milling of steel and cast iron in industrial machining environments Tiger‑tec Silver coating technology Optimised for steel and cast iron 15° clearance angle for stable cutting Octagonal form for versatile indexing Increase process reliability with proven coating and grade The combination of the Tiger‑tec Silver coating and the WKP25S carbide grade is designed to keep cutting edges sharper for longer in demanding applications. The coating reduces abrasive wear and helps maintain edge geometry under thermal load, which leads to consistent component quality and fewer tool changes. For production runs where uptime matters, this results in more predictable cycle times and reduced scrap rates, delivering a measurable contribution to operational efficiency. Broad material coverage with controlled chip formation Optimised for ISO groups P (steel) and K (cast iron), the insert’s geometry and the A57 chipbreaker promote manageable, short chips typical of cast materials while handling continuous chips from steels. The octagonal shape allows several reindexes before disposal, and the 15° clearance angle supports stable engagement in shoulder and slotting passes. This combination simplifies process planning and reduces the need for multiple specialised grades on the shop floor. Practical handling and economical use in production The octagonal plate form and compact size enable fast indexing and economical stock management. With multiple effective cutting edges per insert, the insert reduces tooling consumption and maintenance intervals. In practice, fewer tool swaps mean shorter machine downtime between operations and lower overall tooling cost per component — a direct benefit for batch production and mixed‑model manufacturing where tool availability and quick changeover are crucial. Clear application guidance and integration into tooling systems Designed as a standard format insert for Walter Tools' Tiger‑tec Silver range, the insert suits face milling, shoulder milling and certain light shoulder profiling tasks where stable cutting and reproducible results are required. For integration, select a compatible milling cutter body accepting the OD‑style plate designation and the A57 chipbreaker. For tailored feed‑and‑speed values and mounting recommendations, consult the Metav Werkzeuge technical team to align the insert with machine power and workpiece specifications. For application advice or availability of Walter Tools inserts such as the ODHW0504ZZN-A57 WKP25S, contact Metav Werkzeuge for precise cutting data and local supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: ODHW0504ZZN-A57-WKP25S-WALTER Label: Fräswendeschneidplatte ODHW0504ZZN-A57 WKP25S Walter Tools SKU: ODHW0504ZZN-A57-WKP25S-WALTER Facts Clearance angle: 15° Plate form: Octagonal Plate size: 05 Plate thickness: 04 Tolerance class: H Special features Series: Tiger‑tec Silver Grade: WKP25S (coated carbide) Chipbreaker: A57 Material application: Steel (P) and Cast iron (K) Execution: W FAQ What materials is this insert suitable for? The ODHW0504ZZN-A57 WKP25S insert is intended for ISO groups P and K, meaning it is suitable for machining steel and cast iron with optimised chip control. How does the Tiger‑tec Silver coating help in production? The Tiger‑tec Silver coating enhances abrasive wear resistance and thermal stability, which supports longer edge life and more consistent surface finish during extended production runs. How many usable edges does the octagonal plate provide? The octagonal design allows multiple indexing positions, giving several fresh cutting edges before the insert must be replaced, improving tool economy and reducing downtime. Is this insert compatible with standard cutter bodies? The insert follows a common OD‑style designation; it requires a milling cutter body that accepts the ODHW0504ZZN‑A57 form and is compatible with the A57 chipbreaker geometry. Manufacturer: Walter Tools; Walter AG, Tübingen; The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group. Protected trademarks and trade names belong to their respective owners. Brand names and protected designations are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered item is original and brand‑new.
ODHW0504ZZN-A57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance from the Tiger·tec Gold technology, reliable chip control via the A57 chipbreaker and a 15° relief angle to maintain stable edge life in steel and cast‑iron milling operations. Order the ODHW0504ZZN-A57 WKP35G directly via Metav Werkzeuge or contact the consultants for application advice. ODHW0504ZZN-A57 WKP35G milling insert — Tiger·tec Gold for steel and cast‑iron | Walter Tools ODHW0504ZZN-A57 WKP35G is a coated indexable milling insert engineered for productive machining of steel and cast‑iron components Tiger·tec Gold coating for long life Optimised chipbreaker A57 15° relief angle for smooth cutting Octagonal insert form for multiple edges Consistent edge performance for demanding production The Tiger·tec Gold coating combined with the WKP35G carbide grade delivers elevated resistance to flank wear and thermal degradation, which translates into longer tool life and fewer insert changes. For industrial shops focused on cycle-time reduction, this translates into stable cutting conditions and fewer interruptions. The octagonal form provides several usable edges, increasing cost efficiency per insert while preserving surface integrity on workpieces in steel and cast iron. Controlled chip formation and surface quality The dedicated A57 chipbreaker geometry is optimised for the chip characteristics of P and K material groups, enabling consistent chip segmentation and evacuation. That targeted chip control reduces the risk of built-up edge and supports a reliable surface finish without complex process adjustments. Where component tolerances matter, the insert's geometry helps maintain dimensional stability and contributes to repeatable results on serial parts. Productivity-oriented design for workshop workflows A 15° relief angle and a robust coated substrate combine to reduce cutting forces and improve insert resilience under variable feeds and depths of cut. The design emphasis is on predictable performance in mixed-series production and short set‑up times thanks to a familiar insert form and proven grade. For engineering teams seeking to streamline operations, the insert supports higher uptime and consistent throughput in milling applications. Compatibility, applications and selection guidance The insert is suitable for machining unalloyed and alloyed steel as well as cast iron, following ISO 513 groupings P and K. As part of the Tiger·tec Gold series and specified as WKP35G, the grade is a coated cemented carbide designed to balance wear resistance and toughness. When selecting cutting parameters, the A57 chipbreaker should be matched to the chip thickness range typical for the job; conservative starting feeds and an incremental increase while monitoring surface quality is recommended for first‑use trials. Contact Metav Werkzeuge to arrange availability details for the Walter Tools ODHW0504ZZN-A57 WKP35G insert and to discuss suitable cutting data for the application — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ODHW0504ZZN-A57-WKP35G-WALTER Article: Fräswendeschneidplatte ODHW0504ZZN-A57 WKP35G Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WKP35G Shape: Octagonal (Achteck) Chipbreaker: A57 Execution: W Tolerance class: H Applicable materials: P (steel), K (cast iron) Facts Insert size: 05 Thickness: 04 Relief/clearance angle: 15° Coating/technology: Tiger·tec Gold Material family: coated cemented carbide Special features Coated carbide grade WKP35G Optimised chip control for P and K groups Multiple usable cutting edges due to octagonal form Engineered for stability and predictable wear behaviour Designed for productive milling operations FAQ Which materials is this insert suited for? The ODHW0504ZZN-A57 WKP35G insert from Walter Tools is specified for machining steel (P) and cast iron (K) according to ISO grouping, with the grade optimised for the thermal and abrasive conditions typical of those materials. How does the Tiger·tec Gold technology benefit machining? Tiger·tec Gold on the WKP35G grade enhances wear resistance and adhesion control, which helps the insert maintain cutting performance over longer operating periods and supports consistent surface quality in serial milling. What role does the A57 chipbreaker play? The A57 chipbreaker is designed to produce consistent chip segmentation for the insert's target materials, improving evacuation and reducing the risk of built‑up edge while aiding repeatable surface finishes. What is the relief angle and why is it important? The insert features a 15° relief angle; this geometry reduces friction at the clearance face, lowering cutting forces and helping to preserve the tool edge during interrupted and continuous milling operations. Is this insert compatible with standard Walter Tools milling cutters? The form and ISO designation align with common indexable cutter systems; compatibility depends on the cutter's pocket geometry and clamping — confirm the seat and clamping type against the ODHW0504ZZN-A57 WKP35G specification. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations, including Walter Tools, are used for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
ODHW0504ZZN-A57 WPP35G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the WPP35G grade delivers reliable wear resistance and consistent chip control for demanding production runs; benefit from stable edge life and predictable process results. Order the ODHW0504ZZN-A57 WPP35G directly via Metav Werkzeuge or contact the consultants for cutting-data and application advice. ODHW0504ZZN-A57 WPP35G – Indexable milling insert, Tiger·tec Gold, for Stahl (Walter Tools) The ODHW0504ZZN-A57 WPP35G is an octagonal indexable milling insert with a 15° relief angle, designed for high stability and controlled chip formation when machining Stahl. Tiger·tec Gold coating for extended tool life Optimised chipformer A57 for reliable chip control Octagonal insert with 15° relief angle Designed for Stahl machining (ISO material group P) Consistent performance through advanced coating technology The insert uses the Tiger·tec Gold coating together with a WPP35G coated-carbide substrate to provide a balance between wear resistance and toughness. This combination is engineered to slow flank and crater wear under the thermal and mechanical loads typical of machining Stahl, resulting in longer effective tool life. By reducing the rate of tool degradation, the solution supports higher uptime and fewer tool changes, improving overall productivity on batch and continuous production runs. Stable cutting behaviour and assured chip control An A57 chipformer is integrated to manage chips reliably under varied cutting conditions typical for Stahl machining. The octagonal geometry increases available cutting edges per insert and, together with the 15° relief, helps maintain a stable cutting line and reduces vibration. Reduced chatter and predictable chip flow lead to improved surface finish and dimensional repeatability, which is particularly valuable when consistent part quality is required in production environments. Economic advantages from predictable wear and repeatability The grade is tailored to the thermal characteristics and chip formation of machining Stahl, offering a compromise between hardness and toughness that helps avoid premature edge failure. Predictable wear behaviour simplifies tool-change planning and cost-per-part calculations, supporting a rational purchasing and process strategy. For operations prioritising throughput and lower tooling overheads, the grade’s reliability contributes to a measurable reduction in unplanned downtime. Practical integration and selection guidance The insert is compatible with standard indexable milling toolholders that accept the ODHW family and the specified size. While final cutting parameters depend on machine rigidity, holder type and workpiece condition, the WPP35G grade is intended for general to demanding applications in Stahl and is suitable for operators seeking a robust, versatile insert. For exact feeds, speeds and depth of cut recommendations, refer to manufacturer data sheets or consult technical advisors to tailor parameters to the specific machining scenario. Contact Metav Werkzeuge to request application sheets and personalised cutting-data for Walter Tools Tiger·tec Gold inserts and ensure the best process results with the ODHW0504ZZN-A57 WPP35G Technical Data Article number / SKU: ODHW0504ZZN-A57-WPP35G-WALTER Designation: ODHW0504ZZN-A57 WPP35G Product type: Indexable milling insert (fräswendeschneidplatte) Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP35G Chipformer: A57 Core data Relief angle: 15° Plate size: 05 Plate thickness: 04 Tolerance class: H Features / Applications Coating and substrate: Tiger·tec Gold, coated carbide Shape: Octagonal (Achteck) Material application: Suitable for Stahl (ISO group P) Typical advantages: Stable edge life, optimised chip control, broad applicability within Stahl machining FAQ What materials is this insert intended for? The ODHW0504ZZN-A57 WPP35G insert is designed primarily for machining Stahl and is categorised for ISO material group P. How does the Tiger·tec Gold coating benefit tool life? The Tiger·tec Gold coating on the WPP35G grade increases resistance to thermal and abrasive wear, extending effective edge life and improving process consistency. What is the purpose of the A57 chipformer? The A57 chipformer shapes and breaks chips reliably during cutting, aiding chip control and reducing the risk of tool or workpiece damage in Stahl machining. How many cutting edges does the octagonal shape provide? The octagonal geometry offers multiple indexable edges per insert, which increases usable life per insert and supports frequent indexation for sustained production. Where can cutting-data for this insert be obtained? Manufacturer cutting-data for the ODHW0504ZZN-A57 WPP35G are available; for tailored recommendations, consult Metav Werkzeuge or refer to Walter Tools documentation. Walter Tools: Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the brands mentioned. The offered article is original, factory-new goods of the manufacturer Walter Tools.
ODHW060516-A57 WSN10 W - Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide WSN10, a proven A57 chipbreaker and an octagonal form for efficient indexability to maintain smooth production flow; order the milling insert directly via Metav Werkzeuge or consult our team for application-specific advice. ODHW060516-A57 WSN10 milling insert — Walter Tools, A57 chipbreaker, octagonal, 15° clearance A robust ODHW060516-A57 WSN10 milling insert designed for general milling tasks where reliable chip control and repeatable edge performance are required. Coated carbide grade WSN10 A57 chipbreaker for reliable chip control Octagonal form provides eight indexable edges 15° clearance angle for stable cutting Consistent chip control that boosts machine uptime The combination of the A57 chipbreaker and a coated carbide substrate delivers stable chip formation across a broad range of common materials. Stable chips reduce the risk of recutting and protect the tool and workpiece, which contributes to fewer interruptions and longer uninterrupted production cycles. The chipformer geometry is engineered to ease evacuations in both finish and semi-finish passes, supporting improved cycle times and predictable throughput. Geometry optimised for repeatable edge life and rapid indexing An octagonal plate shape supplies eight usable cutting edges per index, lowering tooling costs per edge and simplifying spare-part logistics. The 15° clearance angle and a corner radius of 1.6 mm combine to balance edge strength with surface quality, making the insert suitable for typical finishing and medium-depth roughing operations. The design supports quick index changes and consistent seating in standard milling cutters, reducing downtime associated with regrinding or frequent replacements. Coating and grade engineered for reliable performance The grade WSN10 is a coated carbide class developed for a broad application spectrum; its coating promotes abrasion resistance and enhances wear behaviour under industrial milling loads. Material suitability should be checked against the specific application matrix, but the grade is intended to offer a strong compromise between wear resistance and toughness for productive machining. The result is dependable dimensional results and reproducible surface quality when used within the recommended cutting parameters. For application advice or to procure Walter Tools stops such as the ODHW060516-A57 WSN10 insert, contact Metav Werkzeuge for tailored guidance and ordering via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: ODHW060516-A57-WSN10-WALTER Product: Fräswendeschneidplatte / milling insert Designation: ODHW060516-A57 ISO designation: ODHW060516-A57 WSN10 Grade: WSN10 Chipbreaker: A57 Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Material: Katalogabhängig Core specifications Clearance angle: 15° Corner radius: 1.6 mm Plate form: octagonal Plate size code: 06 Thickness code: 05 Tolerance class: H Special features Coated carbide (beschichtetes Hartmetall) A57 chipbreaker geometry Eight indexable edges per plate Stable seating for standard milling cutters Series: Walter Schneidstoffsorte - Serie offen FAQ What materials is this insert suitable for? The ODHW060516-A57 WSN10 insert is a coated carbide grade intended for a wide material range; material suitability should be verified against the product matrix for specific workpiece materials. How many cutting edges are available per plate? The octagonal geometry provides eight indexable cutting edges on the ODHW060516-A57 WSN10, enabling economical edge changes and predictable tool usage. What does the A57 chipbreaker do? The A57 chipbreaker on the ODHW060516-A57 WSN10 promotes controlled chip formation and evacuation, aiding surface finish and reducing the likelihood of recutting. Is the corner radius fixed and what effect does it have? The corner radius of 1.6 mm is integral to the insert geometry and helps to combine edge strength with acceptable surface quality for finishing and medium roughing applications. How should users check compatibility with specific toolholders? Compatibility is confirmed by matching the ODHW060516-A57 seating and tolerance class H with the cutter body specifications and by consulting the supplier’s application sheets. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation or endorsement. The offered item is original and brand-new from the manufacturer.
ODHW0605ZZN-A57 WAK15 Wendeplatten - Walter Tools
Benefit from precise chip control and the economical performance of the WAK15 uncoated carbide grade in this octagonal insert with an optimised A57 chipformer; it delivers reliable machining of aluminium and other non‑ferrous metals. Order the ODHW0605ZZN‑A57 WAK15 directly via Metav Werkzeuge or consult our specialists for application support. ODHW0605ZZN-A57 WAK15 — Indexable milling insert, 15° clearance, Walter Tools The ODHW0605ZZN-A57 WAK15 is an octagonal indexable milling insert engineered for high‑quality processing of aluminium and non‑ferrous metals, combining a sharp uncoated carbide edge with an A57 chipformer for reduced built‑up edge and consistent surface finish. Uncoated carbide grade WAK15 for aluminium 15° clearance angle for smooth cutting Octagonal insert form for versatile indexing A57 chipformer optimised for non‑ferrous metals Faster, cleaner machining of non‑ferrous metals The combination of an uncoated carbide grade and a finely tuned A57 chipformer makes this insert particularly effective for materials in ISO 513 group N (aluminium and other non‑ferrous metals). The geometry promotes thin, controllable chips and reduces adhesion on the cutting edge, which in turn lowers the risk of built‑up edge and improves surface quality. For shops processing cast or extruded aluminium components, this means fewer interruptions for edge dressing and more consistent part tolerances over longer runs. Stable cutting performance and reduced setup time With a 15° clearance angle, the insert ensures a positive shear action that reduces cutting forces and vibration in lightweight alloys. The octagonal form allows multiple index positions, increasing usable edge life before a replacement is required and enabling quick re‑indexing during production. These characteristics combine to shorten effective machining time per component and to simplify tooling management on the shop floor, supporting dependable cycle times and predictable maintenance intervals. Material compatibility and application clarity Designed within the Walter N‑grade system, the cutting grade WAK15 is an uncoated hardmetal optimised for aluminium and other non‑ferrous metals, including copper and brass. The insert’s geometry and grade selection favour sharp cutting edges and low friction, which are crucial when machining soft, adhesive materials where chip control and surface integrity are priorities. The specification aligns with customers seeking efficient, repeatable finishing and semi‑roughing operations on non‑ferrous parts. Practical integration into existing toolchains This insert is supplied in the ODHW0605ZZN‑A57 format compatible with toolholders accepting octagonal inserts; its standard thickness and form codes make it straightforward to identify and stock. Choosing this grade reduces the need for coated alternatives when the primary concern is chip adhesion and shear behaviour in non‑ferrous alloys. When selecting cutting data, pair the insert with cutter bodies that provide stable clamping and appropriate helix geometry to maximise the benefits of the A57 chipformer and the WAK15 grade. For tailored cutting data or assistance selecting the right insert seat and cutting parameters for this Walter Tools ODHW0605ZZN‑A57 WAK15, contact Metav Werkzeuge for application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ODHW0605ZZN-A57-WAK15-WALTER ISO designation: ODHW0605ZZN-A57 WAK15 Manufacturer: Walter Tools Product type: Indexable milling insert Series: Walter N‑grade system Facts Clearance angle: 15° Plate size code: 06 Thickness code: 05 Tolerance class: H Special features Uncoated carbide grade WAK15 A57 chipformer Octagonal form (Achteck) Series: Walter N‑Sortensystem Execution: W FAQ What materials is this insert suited for? The ODHW0605ZZN‑A57 WAK15 insert is specified for aluminium and other non‑ferrous metals (ISO 513 group N) and is optimised to prevent material adhesion on the cutting edge. Is the grade coated or uncoated? The WAK15 grade is an uncoated carbide designed to provide sharp cutting edges and reduced friction when machining soft, adhesive alloys. How does the A57 chipformer help in practice? The A57 chipformer produces thin, controlled chips that lower the risk of built‑up edge and enable consistent surface finish and stable tool behaviour during continuous non‑ferrous machining. Can the insert be indexed multiple times? Yes — the octagonal form allows several index positions, extending usable edge life and simplifying in‑process rotations to maintain cutting performance. Which series or system does this grade belong to? The insert is part of the Walter N‑grade system, which groups grades optimised for use on non‑ferrous materials. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter AG (brand appearance: Walter Tools) is part of a global tooling group and its brand names are registered trademarks of their respective owners. Protected trademarks and product names are used for explanation only; no affiliation between our company and the trademark owners is implied. The offered item is original, factory‑new merchandise.
ODHW0605ZZN-A57 WKP25S Wendeplatten - Walter Tools
Benefit from a combination of predictable chip control, robust edge life and a versatile geometry that reduces downtime and improves throughput; order the insert through Metav Werkzeuge or consult their specialists for application advice. ODHW0605ZZN-A57 WKP25S Milling Insert — Tiger‑tec Silver, A57 chipbreaker (Walter Tools) A ODHW0605ZZN-A57 WKP25S indexable milling insert designed for productive machining of steel and cast iron, offering a stable cutting edge and reliable chip formation. Tiger‑tec Silver coating for process stability WKP25S grade suited to steel and cast iron A57 chipbreaker for predictable chip control Octagonal 06 form with 15° clearance Predictable chips and consistent surface quality The combination of the WKP25S carbide grade and the A57 chipbreaker delivers controlled chip formation in both short and semi-continuous chip regimes. The coated grade, derived from the Tiger‑tec Silver family, is engineered to withstand typical temperatures and abrasive wear encountered when machining steel and cast iron, which reduces the risk of edge chipping and unexpected tool changes. Controlled chips mean fewer process interruptions and a more consistent surface finish, supporting tighter production tolerances and stable cycle times on milling operations. Geometry that increases productive cutting time The insert’s octagonal form (size 06) and 15° clearance angle provide multiple effective cutting edges and good seating stability in typical milling cutters. Thanks to the form and the 05 plate thickness, the geometry supports axial and radial rigidity during interrupted cuts, which decreases vibration and promotes longer edge life. In practice this translates into fewer indexings per part and improved tool utilisation — a direct contribution to manufacturing efficiency and lower cost per component. Broad application range with economical performance Rated for ISO groups P and K, the insert is suitable for a wide spectrum of unalloyed and alloyed steel grades as well as most cast iron materials, making it a versatile choice for job shops and production environments. The Tiger‑tec Silver coating enhances thermal and abrasive resistance, extending service intervals and enabling higher metal-removal rates where process stability permits. For engineers managing tool inventories, the insert offers predictable behaviour across common materials, supporting consistent machining parameters and simpler tool selection. For tailored application advice and immediate availability contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 and quote ODHW0605ZZN-A57-WKP25S-WALTER Technical data Article number / SKU: ODHW0605ZZN-A57-WKP25S-WALTER Label: Fräswendeschneidplatte ODHW0605ZZN-A57 WKP25S Walter Tools Core data Form size: 06 Plate thickness: 05 Clearance angle: 15° Tolerance class: H Special features Series: Tiger‑tec Silver Grade: WKP25S Chipbreaker: A57 Plate form: octagonal Material suitability: steel (P), cast iron (K) Version: W Product type: milling indexable insert FAQ What materials is this insert suited to? The ODHW0605ZZN-A57 WKP25S insert is specified for machining steel (ISO group P) and cast iron (ISO group K), reflecting the intended scope of the WKP25S grade. What benefit does the A57 chipbreaker provide? The A57 chipbreaker on the ODHW0605ZZN-A57 WKP25S insert promotes controlled chip formation, improving process security and reducing the likelihood of chip-related interruptions. How does the octagonal form affect productivity? The octagonal 06 geometry increases the number of available cutting edges and enhances seating stability, which supports longer productive cutting times and fewer tool indexings. Why choose the Tiger‑tec Silver grade for production runs? Tiger‑tec Silver coating on the WKP25S grade offers improved thermal and abrasive resistance, enabling consistent performance across common workshop steels and cast irons and helping to extend edge life on repetitive jobs. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners; brand names are mentioned solely for explanatory purposes and do not imply any affiliation with or endorsement by our company. The offered article is original, factory-new goods of the manufacturer.
ODHW0605ZZN-A57 WKP35G Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Gold grade and the WKP35G cutting grade for extended tool life and predictable wear; the octagonal geometry with a 15° relief angle offers multiple usable edges and stable cutting in steel and cast iron. Order the ODHW0605ZZN‑A57 WKP35G milling insert directly via Metav Werkzeuge or request technical clarification from the consultants. Indexable milling insert ODHW0605ZZN‑A57 WKP35G – Tiger‑tec Gold, for steel and cast iron (Walter Tools) The ODHW0605ZZN‑A57 WKP35G is an octagonal indexable milling insert engineered for high‑productivity machining of steels and cast irons, combining a wear‑resistant coated carbide grade with a chipbreaker tailored for stable chip formation Tiger‑tec Gold coating for long life Suitable for steel and cast iron 15° relief angle for stable cutting Octagonal shape for multiple indexed edges Improved process reliability through material and coating The combination of the WKP35G grade and the Tiger‑tec Gold coating is designed to deliver consistent edge life and reliable performance when machining common steels and cast irons. The coating technology reduces abrasive wear and supports heat resistance during interrupted cuts, which translates into fewer tool changes and a higher overall machine utilisation rate. This is particularly relevant in batch production and jobbing environments where reproducible tool life reduces planning uncertainty and increases throughput. Geometry and chip control that support productive milling The insert’s octagonal form provides several indexed cutting edges, enabling economical use of the insert body over its life cycle. The integrated A57 chipbreaker and the 15° relief angle contribute to controlled chip formation and deflection, improving surface finish and reducing the frequency of secondary operations. For applications where chip evacuation and stable engagement are critical, the geometry helps to maintain predictable cutting forces and reduces the risk of built‑up edge, especially in medium‑to‑high material removal rates. Application scope and practical benefits for workshops Designed for the machining of steels (ISO group P) and cast irons (ISO group K), the grade is well suited to mixed‑lot environments where material changeovers are common. The coated carbide base material and the grade’s optimisation for common steel and cast iron behaviours enable the insert to perform across a wide range of feeds and speeds. For workshops seeking to balance tool cost and part quality, the combination of wear resistance and stable cutting geometry results in fewer rejected parts and a smoother production flow. Contact Metav Werkzeuge for tailored recommendations on toolholder compatibility, recommended cutting data for the Tiger‑tec Gold WKP35G grade, or to place an order with full technical support Technical data Article number: ODHW0605ZZN-A57-WKP35G-WALTER Designation: ODHW0605ZZN-A57 WKP35G Manufacturer: Walter Tools Product type: indexable milling insert Facts Relief angle: 15° Plate size: 06 Plate thickness: 05 Tolerance class: H Special features Coating / grade: Tiger‑tec Gold, WKP35G (coated carbide) Chipbreaker: A57 Shape: octagonal Execution/version: W Material suitability: steel (P), cast iron (K) Series: Tiger‑tec Gold FAQ What materials is this insert suitable for? The ODHW0605ZZN‑A57 WKP35G insert is specified for machining steel (P) and cast iron (K) according to ISO groupings, making it suitable for mixed production of these materials. How does the Tiger‑tec Gold coating benefit machining? The Tiger‑tec Gold coating on the WKP35G grade increases abrasive wear resistance and supports thermal stability, which together extend tool life and reduce unplanned tool changes. How many usable edges does the octagonal form provide? The octagonal geometry allows multiple indexed edges per insert, improving cost efficiency by maximising the number of re‑indexable cutting edges before disposal. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and brand names remain the property of their respective owners. Walter Tools is mentioned for identification and explanation only; there is no affiliation implied. The offered article is an original, factory‑new product of the manufacturer.
ODHW0605ZZN-A57 WPP35G W - Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the WPP35G carbide grade for extended tool life and consistent edge stability. The octagonal geometry with a 15° relief angle delivers multiple indexable corners and secure chip control when machining steel, reducing tooling costs and interrupting production less often. Order this insert via Metav Werkzeuge or request specialist advice from our consultants. ODHW0605ZZN-A57 WPP35G indexable milling insert, Tiger‑tec Gold, Walter Tools The ODHW0605ZZN-A57 WPP35G is an octagonal indexable milling insert for steel machining, featuring the Tiger‑tec Gold coating and a 15° relief angle for stable cutting geometry and reliable chip guidance. Tiger‑tec Gold coated carbide grade WPP35G Octagonal insert for increased indexing options 15° relief angle for stable cutting geometry Optimised for machining steel (ISO group P) Extended life and consistent cutting performance The combination of the Tiger‑tec Gold coating and the WPP35G grade yields improved wear resistance and lower flank wear under the thermal and mechanical loads typical of steel machining. This results in a higher number of cutting edges per insert life and a reduced cost per component. The coated carbide substrate reduces friction and supports a reproducible edge condition, which contributes to stable tool life across serial production and shorter non-productive times. More indexable corners and predictable chip control An octagonal plate form increases available index positions, allowing more cuts per insert change and therefore fewer tool changes during a shift. The A57 chipbreaker combined with a 15° relief angle promotes controlled chip formation and evacuation in ISO P materials, improving process reliability and reducing the risk of built-up edge. The insert’s geometry supports a balance between strength and cutting accessibility, making it suitable for a range of milling strategies where stable chip control and consistent surface quality are priorities. Reliable process behaviour and surface quality in steel applications Manufactured to a tolerance class H and designed for steel machining (ISO group P), the insert delivers reproducible cutting results and good surface finish even under challenging feed and depth conditions. The combination of coating technology and substrate selection ensures stable cutting edges and predictable wear progression. If application parameters or cutting data are uncertain, Metav Werkzeuge offers technical advice to align machining strategy with the insert’s strengths and to help achieve the intended productivity and component quality. Contact Metav Werkzeuge for tailored cutting data, application advice or a quotation for the Walter Tools ODHW0605ZZN-A57 WPP35G indexable milling insert optimised for steel machining Technical Data Article number: ODHW0605ZZN-A57-WPP35G-WALTER Name: ODHW0605ZZN-A57 WPP35G Series: Tiger‑tec Gold Grade: WPP35G Manufacturer: Walter Tools Facts Relief angle: 15° Plate size: 06 Plate thickness: 05 Tolerance class: H Form: Octagonal Material group: P (steel) Special features Coating technology: Tiger‑tec Gold Chipbreaker: A57 Execution: W Applicable material: steel (ISO P) Series description: Tiger‑tec Gold coated cemented carbide FAQ What materials is this insert designed for? The ODHW0605ZZN-A57 WPP35G insert is optimised for steel machining and classified for ISO group P, reflecting its suitability for unalloyed and alloyed steels. What benefit does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WPP35G grade reduces friction and improves wear resistance, leading to longer tool life and more consistent edge stability in steel turning and milling tasks. How does the octagonal shape affect tooling costs? The octagonal form offers multiple indexable corners, enabling more re‑uses of the insert before replacement and thus lowering tooling costs per produced part. Which chipbreaker is fitted and what does it do? This insert uses the A57 chipbreaker, which promotes controlled chip formation and reliable evacuation in steel applications, supporting process stability and surface quality. Is the insert suitable for finishing and roughing operations? The combination of WPP35G substrate properties and the A57 chipbreaker provides versatility; it is suitable for a range of milling passes, with parameter adjustment recommended to match specific finishing or roughing requirements. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, brand‑new factory product of the manufacturer.
ODHX0504ZZR-A57 WAK15 Wendeplatten - Walter Tools
High-performance milling solution combining a razor‑sharp cutting geometry and an A57 chipbreaker for stable chip formation; economical edge indexing reduces tooling cost while maintaining consistent surface finish. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application support. ODHX0504ZZR-A57 WAK15 – Octagonal milling insert, 15° relief, Walter Tools ODHX0504ZZR-A57 WAK15 is an octagonal milling insert designed for high‑productivity machining of aluminium and other non‑ferrous metals, optimised for rapid material removal and reliable chip control Walter N‑series grade WAK15 for non‑ferrous metals Octagonal form with multiple usable edges 15° relief for reduced cutting forces A57 chipbreaker for stable chip control Faster, cleaner aluminium machining with a tailored carbide grade The WAK15 grade is an uncoated carbide engineered specifically for aluminium and non‑ferrous materials, delivering a combination of very sharp cutting edges and low friction geometry. This results in reduced built‑up edge and improved surface finish compared with general‑purpose grades. The A57 chipbreaker promotes controlled chip segmentation, which reduces machining interruptions and minimises the risk of chip entanglement. For production environments where cycle time and repeatability matter, the insert’s geometry supports efficient material evacuation and consistent part quality. Cost‑effective tool life through multiple indexable edges and stable shape The octagonal form provides several usable cutting edges, allowing quick indexing and effective cost distribution across the tool life. With a 15° relief angle, cutting forces are moderated, lowering spindle load and contributing to smoother feed rates in finishing and semi‑finishing passes. The insert’s standardised ISO designation ensures straightforward replacement in compatible toolholders from the Walter N‑series. These characteristics together enable a productive balance between longevity and machining performance, making the insert well suited to batch production and short‑cycle operations. Simple integration and predictable process behaviour on shop floors Produced to a H tolerance class, the insert fits precisely in dedicated toolholders and clamping systems, enabling repeatable set‑ups and fast changeovers. The designation ODHX0504ZZR‑A57 indicates the plate form and chipbreaker combination, while the size and thickness follow common indexable insert conventions for easy procurement and stocking. Material group N confirms the intended application range (aluminium, copper, brass and similar alloys). For workshops seeking predictable throughput and straightforward handling, this insert reduces complexity at the machine and helps maintain stable production rates without extensive tuning. For reliable results with Walter Tools inserts, contact Metav Werkzeuge for tailored recommendations and ordering assistance – eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ODHX0504ZZR-A57-WAK15-WALTER Label: Fräswendeschneidplatte ODHX0504ZZR-A57 WAK15 Walter Tools Manufacturer: Walter Tools Product type: Milling insert Series: Walter N‑Sortensystem Facts Relief angle: 15° Insert form: octagonal Size: 05 Thickness: 04 Tolerance class: H Special features Grade: WAK15 (uncoated carbide) Chipbreaker: A57 Execution: X Material group: N (aluminium, non‑ferrous) ISO designation: ODHX0504ZZR-A57 WAK15 FAQ What materials is this insert suitable for? The ODHX0504ZZR‑A57 WAK15 insert is designed primarily for aluminium and other non‑ferrous metals, matching the WAK15 grade’s low‑adhesion geometry. How does the A57 chipbreaker affect machining? The A57 chipbreaker on the ODHX0504ZZR‑A57 promotes stable chip formation and easier evacuation, which reduces interruptions and improves surface quality during high‑feed aluminium cuts. Can this insert be indexed to use multiple edges? Yes, the octagonal form allows several usable cutting edges, enabling economical indexing and extended service life before replacement. Is the insert compatible with Walter N‑series toolholders? The insert is part of the Walter N‑Sortensystem and is intended for integration with corresponding Walter toolholders that accept ODHX‑style inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer.
ODHX0504ZZR-A57 WHH15X WHH15X Wendeplatten - Walter Tools
Take advantage of the combination of a WHH15X coated carbide grade, a 15° clearance angle and an octagonal geometry for reliable chip control and extended cutting life; order directly via Metav Werkzeuge or consult our specialists for material-specific recommendations. ODHX0504ZZR-A57 WHH15X — Milling indexable insert by Walter Tools, 15° clearance A robust milling indexable insert, ODHX0504ZZR-A57 WHH15X, designed for productive profiling and face milling where consistent chip formation and tool life are crucial WHH15X coated carbide grade 15° clearance angle for stable cutting Octagonal insert for eight usable edges Consistent performance through optimised grade and geometry The combination of the WHH15X coated carbide grade and the chipbreaker A57 delivers reliable cutting behaviour across a broad range of general applications. The coating and substrate focus on wear resistance and stable edge retention, which reduces the frequency of index changes and supports longer tool life. With a 15° clearance angle, the cutting geometry lowers rubbing on the flank, improving surface finish and reducing cutting forces; this rational advantage increases throughput and predictable cycle times in production environments. Reduced downtime thanks to indexable octagonal design The octagonal shape provides multiple indexing positions, which translates into more usable edges per insert and less machine downtime for replacements. The compact size codes (05 and thickness code 04) suit modular milling cutters where space and repeatability matter. As part of the Walter open series, the insert’s geometry emphasises stable chip formation and straightforward seating in standard clamping systems, so changeovers are faster and tool inventory is used more efficiently. Easy specification and quality assurance for series production Tolerance class H ensures consistent interchangeability and repeatable results when inserts are swapped between tools. The ISO designation ODHX0504ZZR-A57 WHH15X identifies the geometry and grade for straightforward ordering and inventory control. Material suitability should be verified against the manufacturer's product matrix because the catalog-dependent material information indicates that the exact substrate options may vary; for tailored advice on workpiece materials and cutting parameters, Metav Werkzeuge provides application guidance and technical data. Discuss the WHH15X application with Metav Werkzeuge for a tailored selection and rapid supply; email info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and availability Technical data SKU: ODHX0504ZZR-A57-WHH15X-WALTER Designation: ODHX0504ZZR-A57 WHH15X Product: Milling indexable insert Manufacturer: Walter Tools Core specifications Clearance angle: 15° Insert size: 05 Thickness code: 04 Chipbreaker: A57 Tolerance class: H Materials & special features Coating / grade: WHH15X (coated carbide) Geometry: Octagonal insert Series: Walter Schneidstoffsorte - Serie offen Catalog-dependent material information: Katalogabhängig ISO designation: ODHX0504ZZR-A57 WHH15X FAQ How many usable cutting edges does the insert provide? The octagonal geometry of the ODHX0504ZZR-A57 WHH15X milling indexable insert provides eight usable edges, which extends time between index changes and supports continuous production. What does the WHH15X grade mean for tool life? The WHH15X coated carbide grade in the ODHX0504ZZR-A57 insert is designed to improve wear resistance and deliver stable edge life under typical milling loads, which helps maintain consistent machining quality. Is the insert suitable for stainless or hardened materials? Material suitability depends on the specific substrate and coating variant listed in the catalogue; please refer to the manufacturer’s product matrix for WHH15X or consult Metav Werkzeuge for application-specific recommendations. What benefit does the 15° clearance angle provide? A 15° clearance angle reduces flank contact and heat generation during cutting, promoting better surface finish and reducing cutting forces when using the ODHX0504ZZR-A57 WHH15X insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners and are cited here for explanation only. There is no affiliation or partnership implied between our company and the brands mentioned. The offered article is an original, brand-new product from the manufacturer.
ODHX0504ZZR-A57 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger·tec Gold coating, a precise A57 chipbreaker and an octagonal, indexable design to increase throughput and reduce tool changes; order directly via Metav Werkzeuge or consult the technical team for application support. ODHX0504ZZR-A57 WPP35G Milling indexable insert for steel (Tiger·tec Gold) — Walter Tools The ODHX0504ZZR-A57 WPP35G is a coated carbide milling insert designed for efficient machining of steel with an octagonal form and a 15° relief angle, optimised for stable chip formation and repeatable performance. *Tiger·tec Gold coating for extended tool life *WPP35G: optimised for steel (ISO P) *Octagonal insert with 15° relief for versatile indexing *A57 chipbreaker for reliable chip control Faster, consistent machining of steel components The combination of the WPP35G grade and Tiger·tec Gold coating delivers measurable gains in cycle time and tool life when machining steel (ISO P). The specially designed A57 chipbreaker promotes controlled chip separation under typical steel cutting temperatures, which reduces built-up edge and enables higher cutting parameters. For production environments seeking improved throughput, the coated carbide substrate and coating technology provide stable wear behaviour and predictable performance, helping to shorten process windows and reduce unplanned interventions. Coating and grade: longer life, predictable results The Tiger·tec Gold coating system is engineered to resist abrasion and thermal stress on coated carbide grades. In practice, this means the insert sustains cutting-edge integrity for longer and maintains surface finish across runs. The WPP35G grade balances wear resistance and toughness to suit a range of unalloyed and alloyed steels, offering an economical option where both productivity and component quality are priorities. This technical pairing translates into fewer indexings per component and a lower cost per part over extended production batches. Geometry and indexability increase uptime An octagonal plate form with size 05 and thickness 04 allows multiple effective cutting edges per insert, reducing tooling consumption and downtime for replacements. The 15° relief angle contributes to a reliable cutting geometry across interrupted and continuous cuts, while the insert’s execution X and tolerance class H support consistent seating and repeatability in compatible toolholders. Together, these design choices simplify inventory management and enable predictable tool-change intervals on CNC milling centres. Application guidance and workshop benefits Designed for steel machining, this insert is suitable for a broad range of turning and milling tasks where controlled chip formation and surface integrity are required. The insert’s coated carbide construction and defined chipbreaker suit stable, repeatable operations on production lines and job-shop environments alike. For planning feeds and speeds, the combination of A57 chip control and WPP35G grade allows engineers to prioritise higher material removal rates with maintained surface quality. Contact Metav Werkzeuge for tailored application advice and to secure supply of Walter Tools ODHX0504ZZR-A57 WPP35G inserts for stable production — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ODHX0504ZZR-A57-WPP35G-WALTER Designation: ODHX0504ZZR-A57 ISO designation: ODHX0504ZZR-A57 WPP35G Brand: Walter Tools Series: Tiger·tec Gold Facts Size: 05 Thickness: 4 mm Relief angle: 15° Shape: Octagonal Tolerance class: H Special features Grade: WPP35G Chipbreaker: A57 Coating: Tiger·tec Gold (coated carbide) Material application: Steel (ISO P) Execution: X FAQ What material range is this insert intended for? The insert is formulated for machining steel (ISO P); the WPP35G grade and Tiger·tec Gold coating are tuned to typical steel cutting temperatures and chip formation. How does the A57 chipbreaker affect machining? The A57 chipbreaker promotes controlled chip segmentation during steel cutting, improving chip evacuation and reducing the risk of edge build-up on the insert. How many usable edges are available on the octagonal form? The octagonal geometry provides multiple indexable cutting edges per insert, which reduces tool consumption and increases intervals between replacements. What does tolerance class H mean for toolholders? Tolerance class H indicates precise dimensions and seat accuracy, supporting consistent seating in compatible toolholders for repeatable machining results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. There is no affiliation between Metav Werkzeuge and the mentioned brands beyond the factual reference to original new products.
ODHX0605ZZN-A57 WAK15 Wendeplatten - Walter Tools
Take advantage of precise aluminium machining, reliable chip control and the robust geometry of this Walter Tools insert; the result is improved process stability and consistent surface quality. Order the ODHX0605ZZN‑A57 WAK15 directly via Metav Werkzeuge or request technical advice from our consultants. ODHX0605ZZN‑A57 WAK15 milling insert — uncoated carbide for aluminium | Walter Tools The ODHX0605ZZN‑A57 WAK15 is an octagonal milling indexable insert with a 15° clearance angle, designed for efficient machining of aluminium and other non‑ferrous metals. Octagonal geometry for versatile indexing 15° clearance for reduced rubbing Uncoated carbide WAK15 for aluminium A57 chipbreaker for controlled chips High‑precision aluminium machining with optimised cutting material The insert is made from uncoated carbide in the Walter WAK15 grade, explicitly tuned for aluminium machining and other non‑ferrous metals (ISO group N). The use of an uncoated grade provides a razor‑sharp cutting edge and low adhesion tendency, which reduces the risk of built‑up edge and keeps the cutting gap clear. This characteristic supports stable cutting forces and consistent surface finish when facing, slotting or high‑feed milling aluminium alloys. Geometry tailored to chip control and tool life The octagonal form and the A57 chipbreaker combine to deliver reliable chip control and multiple indexing positions, extending usable life per insert. The 15° clearance reduces flank contact and minimises rubbing on the workpiece, which lowers heat generation and contributes to an extended service interval. For operations where chip evacuation and consistent edge condition are decisive, this geometry helps maintain throughput and reduces the need for rework. Productivity advantages and process security As part of the Walter N‑series, this insert offers process‑oriented performance for mass and batch production in non‑ferrous materials. The sharp edge geometry enables high material removal rates while maintaining acceptable surface quality, so cycle times decrease without compromising result repeatability. The insert’s characteristics support predictable tool change intervals and make process planning more economical over longer production runs. Compatibility with standard milling toolholders and easy handling The insert size and thickness coding match industry conventions for straightforward mounting into compatible milling cutters. The octagonal shape allows several index positions, which reduces downtime for edge changes. Maintenance routines are simplified because the uncoated grade is forgiving to light edge repairs and easier to inspect visually for wear. These handling benefits lead to smoother shop‑floor workflows and quicker tool turnover. For precise aluminium milling, choose the Walter Tools WAK15 insert — contact Metav Werkzeuge for ordering or detailed application guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ODHX0605ZZN-A57-WAK15-WALTER Designation: ODHX0605ZZN-A57 WAK15 Series: Walter N-Sortensystem Grade: WAK15 Manufacturer: Walter Tools Data Geometry: Achteck (octagonal) Clearance angle: 15° Chipbreaker: A57 Insert size: 06 Thickness code: 05 Tolerance class: H Execution: X Material code: N Aluminium application: yes Special features Uncoated carbide suitable for aluminium and NE‑metals Designed for ISO group N materials Part of the Walter N‑series for non‑ferrous machining Multiple indexing positions for extended tool life Optimised for chip control in aluminium alloys FAQ What materials is this insert suitable for? The WAK15 grade is developed for aluminium and other non‑ferrous metals; it is designated for ISO group N and performs well on alloys that require sharp cutting edges and low adhesion. Does the insert require a coating for aluminium applications? No; the uncoated carbide composition of the WAK15 grade is intentional to preserve a sharp edge and reduce built‑up edge when machining aluminium, so a coating is not necessary for the intended applications. How does the A57 chipbreaker affect milling performance? The A57 chipbreaker facilitates controlled chip formation and evacuation, which improves surface finish and reduces the likelihood of chip entanglement in aluminium milling operations. Can the insert be indexed multiple times? Yes; the octagonal geometry provides several index positions, enabling extended usable life per insert and reducing the frequency of replacements. Is this insert part of a product family for easier tool selection? The insert belongs to the Walter N‑series, which is a systemised range for non‑ferrous machining, helping to match insert geometry and grade to specific aluminium processing needs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names remain the property of their respective owners and are mentioned for explanatory purposes only. There is no connection between our company and the referenced brands beyond the sale of original, factory‑new goods of the manufacturer.
ODHX0605ZZN-A57 WHH15X Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide grade WHH15X, a reliable A57 chipbreaker and the octagonal form for fast indexing. This insert supports stable, productive milling with a 15° relief angle — order via Metav Werkzeuge or consult our team for application-specific recommendations. ODHX0605ZZN-A57 WHH15X milling indexable insert — 15° relief, octagonal, Walter Tools ODHX0605ZZN-A57 WHH15X is an octagonal milling indexable insert intended for versatile milling operations where controlled chip formation and secure edge engagement are required Octagonal insert for flexible indexing 15° relief angle for stable cutting engagement A57 chipbreaker for controlled chip formation Coated carbide grade WHH15X for wide material range Higher throughput through controlled chips and stable engagement The octagonal form combined with the A57 chipbreaker provides consistent chip control and reduces unplanned interruptions. The geometry allows multiple indexing positions, which shortens tool-change cycles and increases uptime. The 15° relief angle improves entry behaviour in shoulder cuts and ramps, lowering cutting forces while maintaining a robust cutting edge. These design choices translate directly into measurable productivity gains on both small-batch and serial milling tasks. Precision positioning for repeatable surface quality Tolerance class H and the defined insert dimensions ensure reproducible clamping and repeatable surface results with every index. The coated carbide grade WHH15X delivers wear resistance and thermal stability over extended tool life; verify the exact workpiece compatibility in the manufacturer’s product matrix. Because the insert is ISO-designated and octagonal, setup time is reduced and consistency between cycles is improved — a benefit for shops that prioritise predictable quality and minimal rework. Integrating the insert into machining processes This insert is suited for a broad spectrum of milling strategies where indexable insert reliability is essential. The combination of grade, chipbreaker and relief geometry supports both entry-heavy machining and continuous finishing passes when parameters are adapted accordingly. For specific machining data, feed and speed recommendations should be derived from the cutting material and toolholder system; consult Metav Werkzeuge for tailored parameter sheets and stocking information to ensure optimal process integration. Contact Metav Werkzeuge for application guidance on Walter Tools WHH15X inserts and to discuss suitable machining parameters or availability — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data SKU: ODHX0605ZZN-A57-WHH15X-WALTER Designation: ODHX0605ZZN-A57 WHH15X Product type: Milling indexable insert Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WHH15X Facts Insert size: 06 Thickness: 05 Relief angle: 15° Shape: Octagonal Chipbreaker: A57 Tolerance class: H Special features Coated carbide grade (WHH15X) Versatile material suitability (check product matrix) Execution: X ISO designation: ODHX0605ZZN-A57 WHH15X FAQ What workpiece materials is this insert suitable for? Material suitability must be checked against the product matrix; the WHH15X grade is a coated carbide class designed for a broad material range, but specific recommendations depend on the workpiece and cutting conditions. How does the A57 chipbreaker improve machining? The A57 chipbreaker shapes chips for consistent evacuation and reduced entanglement, improving process stability and surface finish in interrupted and continuous milling operations. Can the insert be indexed multiple times? Yes, the octagonal geometry allows multiple index positions, extending effective tool life and reducing changeover frequency. What does tolerance class H mean for clamping? Tolerance class H specifies the dimensional tolerance band for the insert and contributes to repeatable seating and clamping accuracy in standard indexable insert holders. Is WHH15X a coated or uncoated grade? WHH15X is specified as a coated carbide grade; consult the product matrix for coating details and recommended cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarks and trade names are the property of their respective owners. Brand names and protected trade names are used for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original factory-new goods of the manufacturer Walter Tools.
ODHX0605ZZN-A88 WAK15 Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, sharp cutting geometry and efficient chip control for clean aluminium machining. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. ODHX0605ZZN-A88 WAK15 milling indexable insert, octagonal, 15° clearance — Walter Tools The ODHX0605ZZN-A88 WAK15 is a milling indexable insert designed for aluminium and other non-ferrous metals, optimised for high-speed, adhesion-minimising performance in production environments. Uncoated carbide grade WAK15 Optimised A88 chipbreaker Octagonal format for multiple indexings 15° clearance angle for clean aluminium cuts Reliable performance for non-ferrous machining The octagonal indexable insert offers up to eight usable cutting edges, reducing tool changes and improving uptime in series production. The uncoated WAK15 grade provides a very sharp cutting edge and a geometry tailored to minimise material adhesion on aluminium and related alloys (ISO 513 group N). Combined with the A88 chipbreaker, this configuration promotes short, controllable chips and a steady cutting force, which translates into consistent surface finish and fewer interruptions from built-up edge. For workshops aiming to raise throughput, this insert contributes directly to process efficiency and repeatable part quality. Reduced finishing work through optimised geometry A relief of 15° and a compact plate thickness deliver a cutting geometry that prioritises low friction and clean shearing in soft, sticky materials. The octagonal plate form supports multiple reclamp cycles before replacement, while the A88 chip control mitigates long, stringy swarf that can damage workpieces or tools. As a result, secondary finishing is often reduced, saving time on deburring and inspection. The combination of shape and chipbreaker design is particularly advantageous when working at elevated feed rates or with light interrupted cuts typical of aluminium machining. Practical handling and process integration The insert’s compact size and standard designation ensure straightforward integration into common cutter bodies and toolholders used across milling operations. Familiar ISO-style identification and clear tolerance class facilitate inventory management and quick selection for specific operations. The robust indexable format lowers tooling costs per cutting edge and simplifies maintenance routines: change an insert in minutes rather than replacing or regrinding complete cutters. For teams with mixed workloads, the insert provides a reliable option when switching between aluminium and other non-ferrous components. Application advice for consistent results To make the most of the insert, pair the plate with a stiff toolholder and appropriate coolant or air blast to evacuate chips and prevent heat build-up. Moderate cutting speeds with higher feed per tooth often produce the best surface finishes in aluminium; the sharp carbide and A88 chipbreaker support this approach. Where adhesion is a recurrent issue, verify tool runout and use low-friction coatings on mating components if available, while keeping the insert itself uncoated to preserve the acute edge required for clean shearing. Contact Metav Werkzeuge for tailored toolholder and machining recommendations for Walter Tools inserts — our consultants provide application-specific advice and rapid delivery options. Technical data SKU: ODHX0605ZZN-A88-WAK15-WALTER Label: Fräswendeschneidplatte ODHX0605ZZN-A88 WAK15 Walter Tools Series: Walter N-Sortensystem Grade: WAK15 Designation: ODHX0605ZZN-A88 WAK15 Core dimensions Plate size: 06 Plate thickness: 05 Relief / clearance angle: 15° Plate form: Achteck (octagonal) Chipbreaker: A88 Materials & features Material group suitability: Aluminium / non-ferrous metals (ISO 513 N) Carbide type: uncoated carbide Tolerance class: H Execution: X FAQ What materials is this insert suitable for? The insert is optimised for aluminium and other non-ferrous metals (ISO 513 group N); the WAK15 grade and A88 chipbreaker reduce adhesion and improve chip control in these materials. How many cutting edges are available on the octagonal plate? The octagonal plate form provides multiple indexable cutting edges, enabling several repositions before replacement and lowering cost per edge. Is the grade coated or uncoated? The WAK15 grade is an uncoated carbide designed to maintain a very sharp edge for clean shearing in soft, adhesive materials. Which chip control can be expected with this geometry? The A88 chipbreaker promotes short, controllable chips ideal for aluminium, reducing the risk of long swarf and improving surface finish consistency. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ODHX0605ZZN-A88 WPM15G WPM15G Wendeplatten - Walter Tools
Benefit from the proven combination of Tiger‑tec Gold coating and the WPM15G grade for stable cutting performance and long tool life; the A88 chipbreaker ensures reliable chip formation and process security. Order directly via Metav Werkzeuge or ask the consultants for a tailored application assessment. ODHX0605ZZN-A88 WPM15G milling insert — Walter Tools, Tiger‑tec Gold, A88 chipbreaker The ODHX0605ZZN-A88 WPM15G is a coated carbide milling indexable insert designed for productive milling operations where consistent edge life and dependable chip control are required Tiger‑tec Gold coating for consistent edge life WPM15G grade for versatile coated carbide performance A88 chipbreaker for stable chip control Octagonal shape for eight indexing positions Longer productive life through advanced coating technology The heart of performance is the Tiger‑tec Gold coating, a multi‑layer surface treatment that enhances wear resistance and reduces flank wear during heavy use. This coated carbide grade, WPM15G, is formulated for broad applicability and stable edge behaviour, reducing the frequency of index changes and downtime. For workshops aiming to keep cycle times low, the result is a measurable improvement in productivity and tool life without sacrificing surface quality. Consistent chip control for secure machining results The dedicated A88 chipbreaker geometry promotes predictable chip formation across common milling conditions. Combined with the insert’s octagonal form, the geometry supports secure evacuation of chips and reduces the risk of re‑cutting, which helps maintain consistent surface finishes. The insert’s 15° clearance contributes to smooth entry and lowers cutting forces, making it suited to many standard milling strategies where process stability is essential. Design that maximises economy and flexibility With an octagonal plate form and six‑by‑five nominal dimensions (size 06, thickness 05), the insert offers multiple indexing positions to extend usable life per insert. The ODHX geometry provides favourable engagement characteristics for peripheral and face milling tasks, enabling cost‑efficient use in batch and single‑piece production. Where tool changeover and inventory rationalisation matter, the combination of form and grade delivers a practical advantage. Application guidance and process assurance This insert belongs to the Tiger‑tec Gold series and carries the WPM15G designation; selection for specific materials should follow the manufacturer’s product matrix to ensure optimum results. The cartridge‑style chip control and robust coated carbide substrate make the insert suitable for a wide range of general milling duties. For unusual alloys or hardened materials, consult technical data to confirm compatibility and recommended cutting parameters. For process‑secure milling with Walter Tools’ Tiger‑tec Gold inserts, contact Metav Werkzeuge for expert advice and application support at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss tool selection and stocking options Technical data Article number: ODHX0605ZZN-A88-WPM15G-WALTER SKU: ODHX0605ZZN-A88-WPM15G-WALTER Product type: Milling indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPM15G Core measurements Clearance angle: 15° Plate size: 06 Plate thickness: 05 Tolerance class: H Special features Coating technology: Tiger‑tec Gold (coated carbide) Chipbreaker: A88 Plate form: Octagonal Designation: ODHX0605ZZN-A88 ISO designation: ODHX0605ZZN-A88 WPM15G FAQ What materials is this insert suitable for? The Walter Tools ODHX0605ZZN-A88 WPM15G is a coated carbide solution; suitability depends on the specific workpiece material — consult the product matrix to confirm material compatibility. How does the A88 chipbreaker affect machining? The A88 chipbreaker is engineered for reliable chip formation and evacuation, reducing the chance of re‑cutting and helping to maintain consistent surface quality with the ODHX geometry. How many indexing positions are available with the octagonal shape? The octagonal plate form provides multiple indexing positions, extending the effective life of the insert and improving economy in continuous production. Is this insert appropriate for high‑speed milling? The combination of the Tiger‑tec Gold coating and the WPM15G grade supports stable performance; final cutting parameters should follow manufacturer recommendations for high‑speed applications. Where can detailed cutting parameters be obtained? Detailed speeds, feeds and depth‑of‑cut data for the ODHX0605ZZN-A88 WPM15G are supplied in the technical documentation and product matrix from Walter Tools Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ODHX0605ZZR-A57 WAK15 Wendeplatten - Walter Tools
The combination of the uncoated carbide WAK15 grade, the A57 chipbreaker and an octagonal form delivers precise, low-adhesion machining of aluminium and other non‑ferrous metals while extending usable edge life; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. ODHX0605ZZR-A57 WAK15 milling indexable insert — Walter Tools (15° clearance, octagonal) The ODHX0605ZZR-A57 WAK15 is an octagonal milling indexable insert designed for sharp‑edge, low‑adhesion performance when machining aluminium and other non‑ferrous materials. *Uncoated carbide for sharp edges and low adhesion *15° clearance angle for light cutting engagement *Octagonal form providing multiple indexable edges *A57 chipbreaker optimised for aluminium alloys High‑performance uncoated grade for non‑ferrous machining The insert uses an uncoated carbide grade (WAK15) specifically developed for non‑ferrous applications, offering the combination of a very sharp cutting edge and wear resistance appropriate for aluminium and similar materials. In practice, this means reduced material build‑up on the cutting edge and improved consistency of surface finish when compared with general‑purpose grades. The classification as a non‑ferrous grade indicates suitability for applications where adhesion and smear are the most common challenges. Geometry and clearance for reliable metal removal A 15° clearance angle and an octagonal plate form create a geometry that balances cutting action and edge strength. The 15° free angle reduces rubbing on the workpiece while maintaining a stable cutting edge during light to medium engagement. The octagonal shape yields several indexable edges per plate, increasing the number of usable cutting corners and contributing to economical tool use in cyclic production environments. Optimised chip control tailored to aluminium The A57 chipbreaker is tuned for the ductile behaviour of aluminium and other non‑ferrous metals; its contour promotes controlled chip formation and evacuation, lowering the risk of built‑up edge and reducing rework. Improved chip control shortens cycle times in many milling operations because fewer interruptions are required for chip clearing. For operators new to chipforming geometries, the chipbreaker can be understood as a micro‑geometry that shapes how the material fractures and curls away from the cutter. System compatibility and practical deployment Designed for the Walter N system, the insert integrates into established tooling platforms and benefits from consistent clamping and repeatability. The designation ODHX0605ZZR‑A57 denotes the basic geometry and chipbreaker type, while the size 06 and thickness 05 identify the plate dimensions within the system. Use in modular milling holders compatible with the Walter N‑series enables quick replacement of indexed edges and predictable performance across batches, which supports process stability in small‑batch and serial production alike. Contact Metav Werkzeuge for application recommendations and stock availability of Walter Tools ODHX0605ZZR-A57 WAK15 inserts; the team can advise on clamping options and best practice for aluminium milling Technical Data SKU: ODHX0605ZZR-A57-WAK15-WALTER Label: Fräswendeschneidplatte ODHX0605ZZR-A57 WAK15 Walter Tools Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Core data Grade: WAK15 Series: Walter N‑Sortensystem Free angle: 15° Plate form: Achteck (octagonal) Plate size: 06 Plate thickness: 05 Chipbreaker: A57 Features / Applications Material group: N (non‑ferrous metals) Primary application: Aluminium and NE‑metals Coating: uncoated carbide (WAK15) System compatibility: Walter N system Tolerance class: H FAQ Is this insert suitable for machining aluminium alloys? Yes. The ODHX0605ZZR‑A57 WAK15 insert is specified for aluminium and other non‑ferrous materials; the WAK15 uncoated grade and the A57 chipbreaker are optimised to reduce adhesion and improve chip control. How many usable edges does the octagonal plate provide? The octagonal form gives multiple indexable edges per plate, allowing several re‑indexes before replacement, which supports economical edge utilisation in the Walter N system. Does the WAK15 grade include a coating? No. WAK15 is an uncoated carbide grade designed for sharp cutting and low adhesion when machining non‑ferrous metals. Which tooling system is this insert intended for? The insert is designed for the Walter N‑system; the geometry and clamping seats conform to holders and tool bodies specified for that series. What benefits does the A57 chipbreaker bring for aluminium? The A57 chipbreaker promotes predictable chip formation and evacuation in ductile aluminium alloys, reducing built‑up edge and improving surface finish. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
ODHX0605ZZR-A57 WHH15X Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide durability, the A57 chipbreaker for controlled chip formation and the 15° relief angle for reduced cutting forces to secure consistent milling performance and lower tool change frequency. Order the insert directly via Metav Werkzeuge or contact the consultants for application advice. ODHX0605ZZR-A57 WHH15X milling indexable insert — octagonal 15° relief, A57 chipbreaker (Walter Tools) A ODHX0605ZZR-A57 WHH15X milling indexable insert designed for productive general milling applications where coated carbide performance and reliable chip control are required Coated carbide grade WHH15X 15° relief angle for versatile milling Octagonal shape for eight indexings Boosted productivity through consistent cutting behaviour The insert is supplied in a coated carbide grade (WHH15X) that is designed to offer stable chip formation and wear resistance under varied conditions. The integrated A57 chipbreaker controls chips to reduce interruptions and enable uninterrupted machining cycles; a chipbreaker is a ground or engineered geometry on the cutting face that breaks and directs chips away from the cutting zone. With a 15° relief angle, the insert reduces radial engagement at the cutting edge, which lowers cutting forces and helps maintain tool life while allowing higher feeds where the machine and component geometry permit. These factors combine to increase machine uptime and contribute to predictable process outputs. Reduced tooling costs through multi-index functionality The octagonal format delivers up to eight indexings per insert, which means the edge can be rotated several times before disposal. This configuration supports reduced tooling consumption and fewer changeovers in batch production. The insert’s designation (size 06, thickness 05) allows simple allocation in stock management and makes it straightforward to match with compatible milling cutters. As indexable solutions are changed quickly, set-up time is minimised and shop-floor efficiency benefits directly from the geometry and form factor of the insert. Clear application guidance and verification of material suitability This insert is a coated carbide type from the Walter series and its workpiece suitability must be checked against the product matrix provided by the manufacturer. The term product matrix refers to the documented pairing of grades, geometries and cutting data that indicates optimal material matches and cutting parameters. Because substrate and process variables influence performance, the matrix should be consulted to confirm whether the grade WHH15X and the A57 chipbreaker are appropriate for a specific application. Where exact process windows are required, the matrix helps to define cutting speeds, feeds and coolant strategies for consistent surface finish and tool life. For tailored application advice on Walter Tools inserts such as the ODHX0605ZZR-A57 WHH15X, contact Metav Werkzeuge for fast technical support at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: ODHX0605ZZR-A57-WHH15X-WALTER Label: Fräswendeschneidplatte ODHX0605ZZR-A57 WHH15X Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Material designation: Katalogabhängig Facts Relief angle: 15° Shape: Achteck (octagonal) Size designation: 06 Thickness designation: 05 Chipbreaker: A57 Grade: WHH15X Tolerance class: H Special features Coated carbide (beschichtetes Hartmetall) Series: Walter Schneidstoffsorte - Serie offen Designation: ODHX0605ZZR-A57 ISO designation: ODHX0605ZZR-A57 WHH15X UID/SKU: ODHX0605ZZR-A57-WHH15X-WALTER FAQ What material types is this insert suitable for? Material suitability must be verified in the manufacturer product matrix; the ODHX0605ZZR-A57 WHH15X is a coated carbide insert and a wide range of materials may be possible depending on the selected cutting data. How many indexings are available with this insert? The octagonal form allows up to eight indexings, so multiple cutting edges can be used before the insert requires replacement. What benefit does the A57 chipbreaker provide? The A57 chipbreaker is engineered to control chip shape and evacuation; it supports consistent chip flow and reduces interruptions caused by long or tangled chips during milling with the ODHX0605ZZR-A57 WHH15X. Is the 15° relief angle suitable for heavy roughing? A 15° relief angle generally reduces radial cutting forces and can be beneficial in many operations; suitability for heavy roughing should be confirmed via the product matrix and by testing under the intended cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mark names and protected designations are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
ODHX0605ZZR-A57 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance, an A57 chipbreaker for controlled chips and an octagonal form with 15° clearance for consistently productive steel machining; order the ODHX0605ZZR-A57 WPP35G through Metav Werkzeuge or consult our specialists for cutting-data recommendations. ODHX0605ZZR-A57 WPP35G — milling insert Tiger‑tec Gold, chipbreaker A57 (for steel) by Walter Tools The ODHX0605ZZR-A57 WPP35G is a coated carbide milling insert engineered for productive steel machining, combining the Tiger‑tec Gold coating with an A57 chipbreaker and an octagonal shape for stable engagement in a range of milling operations. Tiger‑tec Gold coating for long life Octagonal geometry for versatile clamping 15° clearance for smooth cutting Chipbreaker A57 for controlled chips Proven performance for steel machining The grade brings together a coated carbide substrate and the Tiger‑tec Gold technology to deliver extended tool life under typical steel cutting conditions. Designed primarily for the P material group (steel), the insert supports a balanced mix of wear resistance and toughness, which helps sustain consistent cutting edge performance during medium to high material-removal rates. This translates into fewer index changes per shift and higher machine uptime, improving the process economy in batch and series production. Coating and grade: why it matters The WPP35G designation identifies a Walter Tools cutting grade optimised for steel: a coated, hardmetal composition that resists abrasion while maintaining a reliable cutting edge. The WPP35G coating improves thermal and abrasive resistance, reducing flank wear and preserving surface finish over longer cycles. For engineers evaluating tool suites, this means predictable tool life and easier process planning, since the coating addresses the heat and chip characteristics typically encountered when machining unalloyed and alloyed steels. Geometry and chip control for reliable feeds The octagonal plate form and the A57 chipbreaker work together to stabilise chip formation and evacuation. The eight-sided geometry gives flexibility for multiple indexing positions and secure clamping, while the chipbreaker dictates chip flow and fragmentation for better evacuation in slotting, ramping or shoulder milling. The 15° clearance reduces rubbing on the flank, promoting smooth entry and exit of the cutting edge and helping to achieve consistent surface quality with reduced cutting forces. Practical application and integration Suitable for universal steel applications, the insert performs well across a range of feed rates and depths when paired with appropriate cutter bodies. The combination of grade and geometry supports both roughing and semi‑finishing operations where process reliability and repeatable tool life are priorities. For integration into existing tool systems, compatibility with standard ODHX06-sized cutter bodies and standard clamping methods simplifies toolstocking and changeover routines, aiding lean manufacturing workflows. Contact Metav Werkzeuge for tailored cutting data and application advice on the Walter Tools ODHX0605ZZR-A57 WPP35G milling insert; technical consultants are available by e‑mail or phone to recommend optimal parameters and compatible cutter bodies Technical Data Article number: ODHX0605ZZR-A57-WPP35G-WALTER Label: Fräswendeschneidplatte ODHX0605ZZR-A57 WPP35G Walter Tools Manufacturer: Walter Tools Product type: milling insert Series: Tiger‑tec Gold Core specifications Grade: WPP35G Chipbreaker: A57 Free angle: 15° Plate size: 06 Plate thickness: 05 Plate form: Achteck Tolerance class: H Special features Coated carbide (Tiger‑tec Gold) Optimised for material group P (steel) Versatile octagonal geometry Balanced wear resistance and toughness FAQ What materials is this insert designed for? The ODHX0605ZZR-A57 WPP35G milling insert by Walter Tools is optimised for the P group, i.e. a wide range of steels including unalloyed and alloyed steels. Which operations benefit most from this chipbreaker and geometry? Slotting, shoulder milling and semi‑finishing operations profit from the A57 chipbreaker and octagonal plate, as they support controlled chips and stable cutting forces with the ODHX0605ZZR-A57 WPP35G. How does the Tiger‑tec Gold coating affect tool life? The Tiger‑tec Gold coating on the WPP35G grade enhances abrasive and thermal resistance, which typically extends tool life and maintains surface finish across longer production runs. Is the insert compatible with standard ODHX06 cutter bodies? Yes, the ODHX0605ZZR-A57 WPP35G corresponds to ODHX06 plate dimensions and is intended for use in compatible cutter bodies and standard clamping systems. What operational benefits can be expected in a production environment? Customers can expect improved productivity through reduced index changes, consistent surface quality and predictable wear behaviour when using the ODHX0605ZZR-A57 WPP35G in steel machining. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are used for explanation only. There is no connection between our company and the mentioned brands beyond the sale of original, factory‑new products of the manufacturer.
ODMT050408-D57 WKK25G WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, consistent chip control and economical edge count for reliable cast-iron machining; order the insert directly via Metav Werkzeuge or consult our technical advisors for process integration. ODMT050408-D57 WKK25G — Milling indexable insert for cast iron by Walter Tools (Tiger·tec Gold, 15°) ODMT050408-D57 WKK25G is a coated carbide milling insert designed for efficient machining of cast iron, offering a balance of wear resistance and stable chip formation Tiger·tec Gold coating for high wear resistance WKK25G grade optimised for cast iron cutting Octagonal form with multiple usable edges 15° relief angle for controlled cutting geometry Predictable chip control and surface consistency The Tiger·tec Gold coating combined with the WKK25G grade provides a wear-resistant cutting edge that is tuned to the abrasive nature of cast iron. Because the grade is engineered for short, brittle chips typical of this material group, chip formation is stabilised and tool life is extended. This leads to a more consistent surface finish and reduced vibration during milling, which benefits repeatable production processes and minimises rework. Economical edge usage and tool economy The octagonal plate form and compact dimensions mean multiple cutting edges are available before indexation is required. With a corner radius of 0.8 mm and a robust chipbreaker (D57), the geometry supports productive material removal while maintaining predictable edge wear. In practice, this increases the number of effective cutting edges per insert and lowers cost per component, making the insert suitable for batch production and series machining. Geometry tuned for stable cutting forces A 15° relief angle and medium tolerance class ensure the insert provides a reliable cutting geometry that is compatible with a range of toolholders and milling strategies. The moderate relief reduces cutting forces at the edge while preserving strength at the corner, so machining parameters can be set for steady performance rather than conservative idle speeds. This characteristic is particularly advantageous when selecting feeds and speeds for cast-iron operations. Application guidance and integration in production The insert is specified under the designation ODMT050408-D57 WKK25G and is supplied in the Tiger·tec Gold series; it is primarily intended for the machining of cast iron where abrasive wear and chip breakage must be controlled. For integration, standard indexable milling toolholders for ODMT-format inserts are used and the plate thickness designation supports stable clamping. Process trials are recommended to determine optimum cutting data for a given machine, workpiece and coolant strategy. Contact Metav Werkzeuge to confirm suitability for the intended cast-iron application and to request cutting-data recommendations for Walter Tools Tiger·tec Gold inserts Technical data Article designation: ODMT050408-D57 WKK25G SKU: ODMT050408-D57-WKK25G-WALTER Product type: Milling indexable insert Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 0.8 mm Plate form: octagonal Plate size designation: 05 Plate thickness designation: 04 Chipbreaker: D57 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WKK25G (coated carbide) Optimised for: cast iron machining Series: Tiger·tec Gold Execution: T FAQ How suitable is this insert for grey cast iron versus nodular cast iron? The ODMT050408-D57 WKK25G insert is optimised for cast iron in general; the WKK25G grade and Tiger·tec Gold coating handle abrasive wear well and offer stable chip formation across grey and nodular cast iron, though cutting data should be adapted to material hardness and chip-break behaviour. How many cutting edges are available on the octagonal plate? An octagonal plate form provides multiple usable edges before indexation; the exact number depends on the chosen clamping position, but the geometry is intended to maximise edge economy for series milling operations. What effect does the 0.8 mm corner radius have on the workpiece finish? A 0.8 mm corner radius balances edge strength and surface finish: it supports higher feed rates while producing a consistent surface, reducing the tendency for edge chipping during interrupted cuts in cast iron. Is the insert compatible with standard ODMT toolholders? Yes, the ODMT050408-D57 format corresponds to standard ODMT-style indexable milling holders; the insert can be mounted and clamped using holders designed for this designation. What process advantages does the Tiger·tec Gold coating deliver for cast-iron machining? The Tiger·tec Gold coating increases wear resistance and thermal stability under the abrasive conditions typical of cast-iron machining, which translates into longer tool life and more consistent component quality. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ODMT050408-D57 WKP35G Wendeplatten - Walter Tools
The combination of a robust Tiger‑tec Gold coating and the proven WKP35G grade delivers consistent productivity and long tool life in mixed milling operations; its D57 chipbreaker and 0.8 mm corner radius ensure reliable chip control and surface quality. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. ODMT050408-D57 WKP35G – Milling Insert (Tiger‑tec Gold) for Stahl and Gusseisen | Walter Tools A ODMT050408-D57 WKP35G milling insert engineered for productive face and profile milling of Stahl and Gusseisen, combining the Tiger‑tec Gold coating with a D57 chipbreaker for stable cutting performance. Tiger‑tec Gold coating for extended tool life Optimised chip control with D57 chipbreaker Suitable for Stahl and Gusseisen machining Octagonal form with 0.8 mm corner radius Proven productivity through advanced coating and substrate The combination of the Tiger‑tec Gold coating and the WKP35G substrate provides an optimised balance between oxidation resistance and edge toughness. This reduces flank wear under typical milling heat loads and extends usable life, which in turn lowers tool-change frequency and increases uptime. For operations where cycle times and repeatability matter, the coated grade supports higher sustained cut parameters without sacrificing stability. Predictable chip formation and surface finish Equipped with the D57 chipbreaker and an octagonal geometry, the insert delivers controlled chip segmentation that shortens cycle times and simplifies material handling. The modest 0.8 mm corner radius helps maintain a strong cutting edge while contributing to consistent surface quality during finishing passes. These design choices mean fewer interruptions for chip clearing and predictable results on the shop floor. Versatile performance across common engineering materials Designed for the ISO groups P and K, the insert is tailored to machine Stahl and Gusseisen efficiently. The geometry and coating combination addresses both the thermal demands of steel machining and the abrasive tendencies of cast materials, enabling one tool concept to cover roughing and semi‑finishing steps in mixed runs. This versatility supports leaner tooling inventories and more flexible process planning. Robust indexability and handling advantages The octagonal form provides multiple effective cutting edges, improving cost‑efficiency per index. A 15° relief angle ensures secure engagement in a range of cutter bodies while promoting stable chip flow. Together, the geometry and grade simplify insert handling and indexing in production environments, making performance predictable and maintenance straightforward. For tailored recommendations or to order ODMT050408-D57 WKP35G inserts from Walter Tools, contact Metav Werkzeuge for technical consultation and rapid supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number / SKU: ODMT050408-D57-WKP35G-WALTER Designation: ODMT050408-D57 WKP35G Series: Tiger‑tec Gold Grade: WKP35G Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 0.8 mm Plate size: 05 Plate thickness: 04 Tolerance class: M Special features Coating: Tiger‑tec Gold (coated carbide) Chipbreaker: D57 Plate form: Octagonal Material groups: P (Stahl), K (Gusseisen) Substrate: Coated cemented carbide (WKP35G) Application: Face and profile milling FAQ What materials can this insert machine effectively? The ODMT050408-D57 WKP35G insert from Walter Tools is designed for ISO groups P and K, meaning it is suitable for machining Stahl and Gusseisen with good wear resistance and chip control. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold coating on the WKP35G grade enhances oxidation resistance and edge stability, allowing Walter Tools inserts to run at higher cutting parameters with improved tool life versus uncoated grades. What is the benefit of the D57 chipbreaker? The D57 chipbreaker promotes predictable chip segmentation and evacuation during milling, which reduces recutting and supports stable surface finishes with fewer interruptions. How many cutting edges are available per insert index? The octagonal plate form provides multiple indexing positions; exact counts depend on the cutter body and mounting, but the form maximises the number of usable edges for cost efficiency. Is the insert suitable for finishing as well as roughing? Yes. The combination of a 0.8 mm corner radius, 15° relief and the WKP35G grade offers a compromise between toughness and edge definition suitable for both semi‑finishing and certain finishing operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the indicated brands. The offered item is an original, factory‑new product from the manufacturer.
ODMT050408-D57 WPP35G WPP35G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold cutting grade and a D57 chipbreaker, this insert delivers reliable chip control and extended tool life for steel applications; ideal where consistent productivity matters. Order directly through Metav Werkzeuge or consult their specialists for process adaptation and cutting data. ODMT050408-D57 WPP35G milling indexable insert — Tiger·tec Gold for steel (Walter Tools) The ODMT050408-D57 WPP35G is a coated milling indexable insert designed for steel machining, offering robust performance, predictable wear and optimised chip formation. Tiger·tec Gold coating for extended tool life Optimised for steel machining (ISO P) 15° clearance for reliable chip control Octagonal form with 0.8 mm corner radius Increased productivity through a wear-resistant grade The combination of Tiger·tec Gold technology and the WPP35G grade provides a coated carbide substrate engineered for long tool life in steel machining. The grade balances wear resistance and toughness to reduce unexpected edge failures, which contributes to higher uptime and lower tooling costs per part. For operations that prioritise cycle-time consistency, the insert’s geometry and coating reduce thermal degradation and maintain cutting-edge stability, generating fewer interruptions in continuous production. Better surface finish and predictable chip behaviour Thanks to the D57 chipbreaker and a 15° clearance angle, this insert offers controlled chip separation that supports a stable cutting process and improved surface quality. The octagonal shape and the 0.8 mm corner radius help distribute wear across several usable edges, enhancing repeatability in milling passes. For machinists adapting to mixed batch sizes or varying feed rates, the geometry reduces the need for rework and contributes to a smoother downstream process. Flexible use in general and demanding steel applications The ODMT designation signals compatibility with common clamping systems for indexable inserts, while the WPP35G composition targets the ISO P group for unalloyed and alloyed steels. The insert’s execution and tolerance class support repeatable positioning in toolholders, enabling predictable results in serial production and job-shop work. Process planners will appreciate the proven balance between economy and performance when specifying inserts for finishing and semi-finishing operations on steel components. For reliable steel milling with Walter Tools’ Tiger·tec Gold inserts, contact Metav Werkzeuge for ordering and technical consultation at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: ODMT050408-D57-WPP35G-WALTER Designation: ODMT050408-D57 WPP35G Manufacturer: Walter Tools Product type: milling indexable insert Facts Corner radius: 0.8 mm Clearance angle: 15° Plate size code: 05 Plate thickness code: 04 Tolerance class: M Special features Grade: WPP35G (Tiger·tec Gold) Coating: Tiger·tec Gold coated carbide Chipbreaker: D57 Plate form: octagonal Material application: steel (ISO P) Execution: T FAQ Which materials is this insert suitable for machining? The ODMT050408-D57 WPP35G is formulated for machining steel (ISO P); the WPP35G grade is optimised for the typical heat and chip characteristics encountered when cutting unalloyed and alloyed steels. What benefits does the Tiger·tec Gold coating offer? Tiger·tec Gold reduces flank and crater wear on the WPP35G insert, extending usable life and improving process stability during continuous milling operations on steel. How does the D57 chipbreaker affect performance? The D57 chipbreaker promotes consistent chip control and reduces the risk of long, stringy chips, which supports better surface finish and safer material removal in milling operations. Is the geometry suitable for finishing and semi-finishing passes? Yes; the octagonal form and 0.8 mm corner radius are suitable for both finishing and semi-finishing, providing multiple indexable edges and a balance between edge strength and surface quality. Can this insert be indexed several times? The octagonal plate form is designed to provide multiple indexable edges, enabling economical use of the insert across several positions before replacement. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for explanation only; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com