ODMT050408-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Combining the wear‑resistant Tiger·tec Gold grade with a 0.8 mm corner radius and a dedicated D57 chipbreaker, this insert ensures stable cutting edges and improved chip control when machining stainless steels and heat‑resistant alloys. Order the ODMT050408‑D57 WSM35G insert via Metav Werkzeuge or consult their specialists for optimised cutting data and rapid supply. ODMT050408-D57 WSM35G — Indexable milling insert, Tiger‑tec Gold, Walter Tools The ODMT050408‑D57 WSM35G is an octagonal indexable milling insert engineered for demanding milling of stainless steels and heat‑resistant alloys, providing robust edge stability and reliable chip formation in interrupted and continuous cuts. Tiger·tec Gold coated carbide grade Optimised for stainless steels (ISO M) Octagonal shape, 8 usable cutting edges Corner radius 0.8 mm for robust edges Increase throughput with a wear-resistant grade The combination of the Tiger·tec Gold coating and the WSM35G formulation gives a coated carbide solution that balances heat resistance with edge strength. For materials classified under ISO M (rostfreie Stähle) and ISO S (heat‑resistant superalloys and titanium), this grade helps to maintain a stable cutting edge at elevated temperatures and reduces the tendency for built-up edge. The result is longer tool life and more consistent surface quality during extended production runs. Stable edges and controlled chip formation for secure machining A defined corner radius of 0.8 mm together with the D57 chipbreaker supports predictable chip segmentation and evacuation. The 15° clearance assists in reducing rubbing while maintaining a strong cutting edge, which is particularly important when machining tough, adhesive stainless grades. The chipbreaker geometry manages chip curl and thickness to lower cutting forces and reduce the risk of tool damage, translating to fewer interruptions and higher effective machining time. Lower cost per edge through eight usable cutting positions The octagonal insert geometry provides up to eight indexable edges, improving cost efficiency per insert compared with fewer‑edge designs. The insert format (ODMT050408 series) and tolerance class M ensure interchangeability in conventional milling toolholders that accept this form factor. Thanks to the combination of geometry and coated carbide grade, shops benefit from predictable edge changes and reduced setup complexity, supporting repeatable results across batch production. Practical considerations to secure process reliability For best results, pair the insert with toolholders designed for positive pocket support and use cutting parameters adapted for stainless steels and high‑temperature alloys; modest increases in feed per tooth and stable coolant or lubrication strategies often improve chip control. The Tiger·tec Gold technology and WSM35G grade from Walter Tools are designed to assist process engineers in maintaining cutting edge integrity and achieving consistent productivity under challenging conditions. For tailored cutting recommendations and immediate supply of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for expert guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number / SKU: ODMT050408-D57-WSM35G-WALTER Designation: ODMT050408-D57 Full designation: ODMT050408-D57 WSM35G Manufacturer: Walter Tools Product type: Indexable milling insert (milling insert) Series: Tiger‑tec Gold Grade: WSM35G Facts Clearance angle: 15° Corner radius: 0.8 mm Insert size: 05 Thickness: 04 Tolerance class: M Chipbreaker: D57 Shape: Octagon Special features Coating: Tiger·tec Gold Material/grade: Coated carbide Material suitability: stainless steels (ISO M), heat‑resistant alloys and titanium (ISO S) Stable cutting edge and optimised chip control Designed for productive milling of difficult‑to‑cut materials FAQ Is this insert suitable for machining stainless steels? The ODMT050408‑D57 WSM35G insert is optimised for ISO M applications and is engineered to manage the adhesion and heat issues typical of stainless steels, delivering improved chip control and edge life. How many times can the insert be indexed before replacement? Thanks to the octagonal geometry, the insert offers up to eight usable cutting edges; service life per edge depends on cutting parameters and workpiece material when used in Walter Tools milling systems. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WSM35G grade enhances heat resistance and wear performance while supporting stable chip formation in demanding materials such as rostfreie Stähle and superalloys. Which chipbreaker and edge geometry are included? This insert features the D57 chipbreaker combined with a 0.8 mm corner radius and 15° clearance, designed to promote controlled chip segmentation and robust cutting behaviour in intermittent and continuous milling. Is the insert compatible with standard ODMT pockets? The ODMT050408 format and tolerance class M conform to common ODMT‑type pockets; verify toolholder compatibility and clamping seat dimensions before mounting. Manufacturer: Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only; there is no affiliation. The offered item is original, factory‑new goods from the manufacturer.
ODMT050408-D57 WSP45G WSP45G Wendeplatten - Walter Tools
High wear resistance and process stability result from the Tiger·tec Gold coating and the robust geometry; the combination of WSP45G grade and a 0.8 mm corner radius ensures predictable edge life and consistent surface quality in milling of Stahl, rostfreier Stahl and heat-resistant alloys. Order directly via Metav Werkzeuge or request material-specific advice from our consultants. ODMT050408-D57 WSP45G milling insert (octagonal, 0.8 mm radius) — Walter Tools The ODMT050408-D57 WSP45G is a versatile milling insert engineered for productive finishing and roughing operations across Stahl, rostfreier Stahl and high-temperature alloys. Tiger·tec Gold PVD-coated grade WSP45G Suitable for Stahl, rostfreier Stahl and superalloys Octagonal insert with 0.8 mm corner radius 15° relief angle for secure chip control Longer tool life through advanced coating technology The Tiger·tec Gold PVD-coated carbide grade provides a high-performance wear barrier that reduces flank wear and maintains a sharp cutting edge under thermal and mechanical stress. For machining tasks in mixed-part production, this means fewer tool changes and steadier cycle times—an economic advantage for batch and continuous operations. The WSP45G chemistry is designed to balance toughness and hardness, supporting both interrupted cuts and steady finishing passes while resisting edge chipping. Predictable surface quality from defined edge geometry A defined 0.8 mm corner radius and the Octagonal shape deliver controlled cutting engagement and a reliable load distribution across the insert edge. Combined with the D57 chipbreaker and a 15° relief angle, this geometry helps maintain stable chip formation and reduces the risk of built-up edge on demanding materials. The result is consistent workpiece finish and repeatable dimensional accuracy, especially important where tolerance class M compliance is required. Broad material capability with clear application guidance The insert is specified for P / M / S workgroups: P = Stahl, M = rostfreier Stahl, S = heat-resistant superalloys and titanium‑based materials. That versatility allows a single grade to cover many components in mixed-material production. The octagonal configuration offers multiple indexing positions for extended usability before replacement. For process optimisation, pair the insert with suitable toolholders and adjust cutting data according to the material family; for bespoke recommendations, Metav Werkzeuge can provide application-specific guidance. For machining tasks that demand process stability and long edge life, request material-specific advice from Metav Werkzeuge for Walter Tools Tiger·tec Gold inserts — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ODMT050408-D57-WSP45G-WALTER Label: Fräswendeschneidplatte ODMT050408-D57 WSP45G Walter Tools Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Grade: WSP45G Core data Relief angle: 15° Corner radius: 0.8 mm Insert size: 05 Thickness: 04 Tolerance class: M Special features Coating: Tiger·tec Gold Shape: Octagonal Chipbreaker: D57 Material suitability: P / M / S → Stahl, rostfreier Stahl, superalloys Series: Tiger-tec Gold Execution: T ISO designation: ODMT050408-D57 WSP45G FAQ Which materials can this insert machine effectively? The ODMT050408-D57 WSP45G insert is suitable for Stahl, rostfreier Stahl and heat‑resistant superalloys (P / M / S), making it a flexible choice for mixed‑material production. What advantage does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WSP45G grade enhances wear resistance and thermal stability, prolonging edge life and supporting consistent performance in milling operations. How does the octagonal shape influence tool use? The octagonal shape offers multiple indexing positions, which extends usable cutting edges per insert and improves overall cost efficiency in Walter Tools milling systems. What role does the D57 chipbreaker play in machining? The D57 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of built-up edge and improving surface finish for demanding materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names remain the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation. The offered item is an original, factory‑new product of Walter Tools.
ODMT0504ZZN-D57 WKK25G Wendeplatten - Walter Tools
Benefit from productive cast‑iron machining thanks to the Tiger‑tec Gold WKK25G grade and the optimised D57 chipbreaker; the octagonal geometry and 15° relief angle reduce downtime and deliver consistent edge life. Order the ODMT0504ZZN‑D57 WKK25G milling insert via Metav Werkzeuge or consult our specialists for application support. ODMT0504ZZN‑D57 WKK25G milling insert (for cast iron) – Tiger‑tec Gold, Walter Tools ODMT0504ZZN‑D57 WKK25G is a coated carbide milling insert engineered for productive machining of cast iron components in a wide range of milling operations Tiger‑tec Gold coating for wear resistance Optimised D57 chipbreaker for short chips Octagonal indexable geometry for multiple edges 15° relief angle for stable cutting Consistent wear resistance for abrasive cast‑iron work The combination of the Tiger‑tec Gold coating and the WKK25G grade provides robust abrasion resistance in applications with short, breaking chips typical of cast iron. The insert’s coated carbide substrate maintains a stable cutting edge under intermittent loads, which translates into longer tool life and fewer tool changes. This reliability supports higher productivity and predictable process windows in series production and jobbing shops alike. Improved chip control cuts cycle times and rework The D57 chipbreaker is tuned for cast‑iron behaviour and promotes the formation of short, easily evacuated chips. Controlled chip flow reduces the risk of recutting and improves surface quality, helping to shorten cycle times and reduce secondary operations. Process stability is further enhanced by the insert’s geometry, which supports consistent chip formation even under varying depths of cut. Reduced setup time through octagonal indexable geometry The octagonal shape allows multiple indexed edges on a single insert, increasing usable cutting edges per tool and lowering per‑edge cost. The systematic indexing reduces machine downtime for tool changes and simplifies inventory management. For workshops aiming to boost uptime, the geometry provides a clear efficiency gain without complex retooling. Practical machining data and straightforward integration With a 15° relief angle and a tolerance class of M, the insert integrates easily into standard cutter bodies and holders designed for ODMT‑style inserts. The insert designation follows industry standards for unambiguous procurement and tool planning. Where process optimisation is required, the insert’s features support both conservative and more aggressive cutting strategies while maintaining surface quality in cast‑iron components. For demanding cast‑iron milling tasks, consider the Walter Tools ODMT0504ZZN‑D57 WKK25G with Tiger‑tec Gold coating and consult Metav Werkzeuge for specific application recommendations and availability. Technical data SKU: ODMT0504ZZN-D57-WKK25G-WALTER Article: ODMT0504ZZN-D57 WKK25G Manufacturer: Walter Tools Product type: milling insert Series: Tiger‑tec Gold Grade: WKK25G Execution: T Facts Relief angle: 15° Plate size designation: 05 Thickness designation: 04 Chipbreaker: D57 Shape: octagonal Tolerance class: M Special features Coating/grade: Tiger‑tec Gold (WKK25G) Substrate: coated carbide Optimised for: cast iron Multiple indexing edges due to octagonal form Short‑chip geometry for secure chip control FAQ What materials is this insert designed for? The ODMT0504ZZN‑D57 WKK25G insert is optimised for machining cast iron; the Tiger‑tec Gold grade and D57 chipbreaker are tuned for abrasive, short‑chip behaviour. How does the D57 chipbreaker benefit production? The D57 chipbreaker promotes short, controllable chips and consistent chip evacuation, which reduces recutting and helps to maintain surface quality during cast‑iron milling. How many edges are available per insert with the octagonal form? The octagonal geometry provides multiple indexable cutting edges, increasing the number of usable edges per insert and lowering replacement frequency. Is this insert compatible with standard ODMT cutter bodies? Yes, the insert follows the ODMT designation and standard geometry parameters, including a 15° relief specification and tolerance class M, allowing straightforward integration in compatible cutter systems. Can this insert handle interrupted cuts common in cast‑iron components? The coated carbide grade and Tiger‑tec Gold technology provide enhanced edge stability under intermittent loading, making the insert suitable for many interrupted‑cut scenarios in cast‑iron machining. Manufacturer: Walter AG; Headquarters: Tübingen, Germany. Walter Tools is a brand of Walter AG and forms part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only and do not imply any affiliation. The offered article is an original, brand‑new product of the manufacturer.
ODMT0504ZZN-D57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coated carbide, reliable chip control (D57) and the octagonal ODMT form for consistent milling results in steel and cast iron; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. ODMT0504ZZN-D57 WKP25S milling indexable insert — for steel and cast iron (Walter Tools) The ODMT0504ZZN-D57 WKP25S is an indexable milling insert engineered for productive machining of steel and cast iron, featuring Tiger‑tec Silver coating and a D57 chipbreaker for reliable chip formation Tiger‑tec Silver coating for high wear resistance WKP25S grade optimised for steel and cast iron 15° clearance angle for versatile engagement Octagonal insert form ODMT, D57 chipbreaker Greater process reliability and consistent surface quality The combination of Tiger‑tec Silver coating and the WKP25S grade results in a coated carbide geometry that maintains a stable cutting edge under typical steel and cast iron conditions. This stability reduces flank wear and contributes to a more consistent surface finish, which is particularly valuable in serial production where repeatability matters. The insert is designed according to ISO material groupings P (steel) and K (cast iron), so the material interaction and heat management are optimised for these workpiece families. As a result, machining cycles become more predictable and scrap rates are reduced, supporting a cost-efficient production flow. Optimised chip control to shorten cycle times and lower downtime The D57 chipbreaker and the octagonal ODMT form work together to improve chip formation and evacuation, minimising the risk of built-up edge and erratic chip shapes. With a 15° clearance angle, the geometry allows reliable engagement across a range of feed rates and depths of cut, which supports flexible process planning and rapid changeovers. Improved chip control not only protects the tool and workpiece but also reduces interruptions from chip-related stoppages, contributing to shorter effective machining times and higher overall equipment effectiveness. Simple integration and repeatable performance across toolholders The compact dimensions (insert size 05 and thickness 04) and the ODMT designation mean this indexable insert integrates with standard milling toolholders, enabling straightforward replacement and indexing. The geometry and coating focus on delivering repeatable performance, which simplifies tool inventory and reduces qualification time for new operations. For engineering teams aiming to balance productivity with predictable tool life, the combination of form, chipbreaker and coated grade provides a practical solution that supports stable process windows and predictable outcomes in medium- to high-volume milling tasks. For application-specific recommendations or to check availability of the ODMT0504ZZN-D57 WKP25S insert from Walter Tools, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and rapid delivery options Technical data SKU: ODMT0504ZZN-D57-WKP25S-WALTER Article designation: ODMT0504ZZN-D57 WKP25S Product type: milling indexable insert Brand: Walter Tools Series: Tiger‑tec Silver Grade: WKP25S Execution: T Facts Clearance angle: 15° Insert size: 05 Thickness: 04 Tolerance class: M Chipbreaker: D57 Special features Insert form: octagonal (ODMT) Coating: Tiger‑tec Silver Material groups: P / K (steel and cast iron) Suitable for: steel, cast iron Base designation without grade: ODMT0504ZZN-D57 FAQ Which materials is this insert intended for? The ODMT0504ZZN-D57 WKP25S insert is specified for steel and cast iron according to the ISO material groups P and K, reflecting the design focus of the WKP25S grade. What is the advantage of the WKP25S grade and Tiger‑tec Silver coating? WKP25S in the Tiger‑tec Silver family is a coated carbide grade optimised for abrasive and thermal conditions encountered when machining steel and cast iron, providing improved wear resistance and longer edge life. How does the D57 chipbreaker influence machining? The D57 chipbreaker is designed to produce controllable chip forms for interrupted and continuous milling in steel and cast iron, aiding chip evacuation and reducing the chance of built‑up edge. What is the insert geometry and how does it fit toolholders? The octagonal ODMT form with size 05 and thickness 04 fits holders designed for ODMT inserts; the form offers multiple cutting edges per indexable insert and easy replacement in compatible milling cutters. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for clarification only and do not indicate any affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer Walter Tools.
ODMT0504ZZN-D57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, broad material coverage and economical edge utilisation for smooth production cycles; order the insert via Metav Werkzeuge or consult our experts for application-specific recommendations. ODMT0504ZZN-D57 WKP35G — Fräswendeschneidplatte by Walter Tools (Tiger·tec Gold, for steel & cast iron) The ODMT0504ZZN-D57 WKP35G is an indexable milling insert designed for robust machining of steel and cast iron, combining Tiger·tec Gold technology with an octagonal geometry for efficient edge rotation. Walter Tools Tiger·tec Gold grade WKP35G Suitable for steel and cast iron machining Octagonal shape for multiple indexable edges 15° relief angle for stable cutting Higher throughput through consistent cutting performance The ODMT0504ZZN-D57 WKP35G insert delivers reliable metal removal thanks to the Tiger·tec Gold coating and a coated carbide substrate engineered for abrasion resistance. The result is consistent cutting behaviour when machining steel and cast iron, which reduces process variation and minimises unplanned downtime. By favouring stable chip formation and predictable flank wear, this geometry supports higher table feedrates while keeping surface finish and tool life within controlled limits. The measurable benefit for production is fewer tool changes and more predictable batch output. Designed for versatile material ranges and secure chip control With a grade tailored to steel (P) and cast iron (K) applications, the WKP35G variety addresses the differing wear mechanisms of both groups — thermal softening in steels and abrasive wear in irons. The chipbreaker D57 promotes controlled chip segmentation, which reduces risks of built-up edge and improves evacuation in pocket and ramping operations. Together with the 15° relief angle, the insert offers a balance between edge strength and cutting entry geometry, contributing to process security and repeatable component quality on mixed-material production lines. Practical geometry that reduces cost per edge The octagonal plate form offers multiple usable cutting edges, allowing efficient indexing and economical use of each insert. The octagonal shape and compact plate size provide flexibility for a range of cutter bodies and pocket designs, while the moderate thickness ensures good rigidity in interrupted cuts. This design philosophy translates to lower cost per effective cutting edge and simplified inventory management: fewer SKUs can cover more jobs without sacrificing performance, supporting leaner toolholding strategies in the workshop. Handling, setup and expected advantages on the shop floor Installation and indexing are straightforward with standard Walter Tools seatings; the insert's execution and tolerance class ensure reproducible positioning for repeat operations. The grade's emphasis on abrasion resistance and process security means predictable wear progression, which simplifies tool-life monitoring and planning of preventive maintenance. For teams upgrading from conventional grades, this insert typically brings improved component finish and longer intervals between regrinds or exchanges, contributing to overall productivity gains. For application advice, availability or to discuss cutter compatibility for the Walter Tools ODMT0504ZZN-D57 WKP35G insert, please contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: ODMT0504ZZN-D57-WKP35G-WALTER Designation: ODMT0504ZZN-D57 WKP35G Product type: Fräswendeschneidplatte Brand: Walter Tools Series: Tiger-tec Gold Grade: WKP35G Execution: T UID: ODMT0504ZZN-D57-WKP35G-WALTER Facts Relief angle: 15° Plate form: Achteck (octagonal) Plate size: 05 Plate thickness: 04 Tolerance class: M Special features Material suitability: P / K (steel and cast iron) Chipbreaker: D57 Coating/substrate: coated carbide (Tiger·tec Gold) Main applications: general milling operations in steels and cast irons FAQ What materials is this insert suited for? The ODMT0504ZZN-D57 WKP35G insert is designed for machining steel and cast iron, reflecting the P and K suitability of the WKP35G grade. How does the Tiger·tec Gold technology benefit machining? Tiger·tec Gold on this Walter Tools insert improves abrasion resistance and thermal stability, which leads to more consistent cutting and extended edge life under typical milling conditions. What advantages does the octagonal plate form provide? An octagonal geometry offers multiple indexable edges, allowing more economical use of each insert and simplifying inventory by increasing the number of usable edges per plate. Is this insert suitable for interrupted cuts? Yes — the combination of plate thickness, execution and the WKP35G grade delivers good edge strength and wear resistance for many interrupted milling scenarios in steel and cast iron. Which chipbreaker should be selected for general-purpose milling with this plate? The ODMT0504ZZN-D57 comes with chipbreaker D57, which is intended to promote controlled chip formation for mixed milling tasks in steels and cast irons. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
ODMT0504ZZN-D57 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of a Tiger·tec Gold coated grade engineered for steel, combined with an optimised D57 chipbreaker and an octagonal form that enables multiple indexings for economical milling. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. ODMT0504ZZN-D57 WPP35G — Walter Tools indexable milling insert, octagonal, Tiger·tec Gold The ODMT0504ZZN-D57 WPP35G is an octagonal indexable milling insert designed for productive machining of steel, offering a Tiger·tec Gold coated, coated-carbide construction and a 15° clearance for stable cutting. Tiger·tec Gold coating for extended tool life Optimised D57 chipbreaker for steel machining Octagonal shape allows multiple indexings 15° clearance angle for stable cutting Higher productivity with predictable wear and economical edge usage The Walter Tools grade combines Tiger·tec Gold surface technology with the WPP35G grade to provide wear resistance tailored to the thermal and chip-formation behaviour of steels (ISO group P). The octagonal plate shape and size designation 05 allow several indexings, which reduces tool-change frequency and parts-per-edge cost. With a 15° clearance angle and thickness class 04, the insert maintains a consistent engagement geometry that supports repeatable chip formation and predictable flank wear. These technical attributes translate into measurable productivity gains in series milling operations. Reliable chip control for consistent surface quality and process security The integrated D57 chipbreaker is optimised for steel cutting and promotes controlled fragmenting of swarf, reducing the risk of built-up edge and improving surface finish. Controlled chip flow minimises interruptions from swarf entanglement and supports stable cutting forces, which in turn reduces spindle load variations. The coated-carbide substrate beneath the Tiger·tec Gold layer contributes to robust edge retention under the heat and mechanical stress typical of steel milling, supporting longer interval lengths between inspections and lower process variance. Economic performance through coating technology and multiple usable edges By combining a modern coating system with a multi-edge octagonal geometry, the insert delivers an advantageous cost-per-component footprint. The coated surface reduces flank wear and protects the substrate during high-material-removal-rate passes, while the availability of several indexing positions extends usable life before replacement. In practice this means fewer tool assemblies to inventory and less machine downtime for tool changes, supporting smoother production flows and predictable maintenance planning. Technical consultation is available for matching the insert grade to specific steel subgroups and machining strategies. Speak to Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and to optimise milling strategies — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: ODMT0504ZZN-D57-WPP35G-WALTER Designation: ODMT0504ZZN-D57 WPP35G Type: Fräswendeschneidplatte Brand: Walter Tools Facts Clearance angle: 15° Size designation: 05 Thickness class: 04 Tolerance class: M Special features Series: Tiger-tec Gold Grade: WPP35G Chipbreaker: D57 Plate form: octagonal Construction: coated carbide Application: steel (ISO group P) FAQ What materials is the ODMT0504ZZN-D57 WPP35G suited for? The ODMT0504ZZN-D57 WPP35G is formulated for steel machining (ISO group P) and its Tiger·tec Gold coating and D57 chipbreaker are optimised for the thermal and chip-formation characteristics of various steel grades. How does the D57 chipbreaker benefit the machining process? The D57 chipbreaker on this Walter Tools insert promotes predictable chip fragmentation and controlled evacuation, which improves surface quality and reduces the likelihood of workpiece or tool damage. How many indexings are available with the octagonal plate form? The octagonal geometry allows multiple usable edges per insert, extending service life and lowering the cost per cutting edge compared with single-edge solutions. Is the WPP35G grade suitable for heavy-duty roughing as well as finishing? WPP35G is designed as a balanced, coated-carbide grade that offers good wear resistance and toughness for productive milling of steels, making it appropriate for a range of roughing and finishing applications depending on cutting parameters. Where can further technical data or application advice be obtained? Detailed application guidance and compatibility information for the ODMT0504ZZN-D57 WPP35G are available from Metav Werkzeuge; technical enquiries can be directed to info@metav-werkzeuge.com or +49 2822 7131930. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
ODMT0504ZZN-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Benefit from Tiger·tec Gold wear resistance combined with the WSM35G grade and a 15° clearance angle for stable machining of stainless steels and heat‑resistant alloys; this combination supports consistent chip control and prolonged tool life. Order the insert directly via Metav Werkzeuge or request specialist advice from our consultants for application support. ODMT0504ZZN-D57 WSM35G milling indexable insert – Tiger·tec Gold, for stainless steels and superalloys | Walter Tools An ODMT0504ZZN-D57 WSM35G milling insert engineered for secure chip formation and reliable edge stability when machining stainless steels and heat‑resistant superalloys Tiger·tec Gold coated for high wear resistance WSM35G grade for stainless and superalloys 15° clearance angle for secure cutting action Octagonal ODMT form for versatile application Consistent performance in demanding materials The ODMT0504ZZN‑D57 WSM35G insert combines the Tiger·tec Gold coating with a WSM35G coated carbide grade to deliver dependable performance when machining stainless steels and superalloys. The coating reduces abrasive wear and enhances thermal resistance, which in turn supports a stable cutting edge under elevated temperatures. For shops processing tough, heat‑retaining workpiece materials, this geometry and grade reduce the risk of edge build‑up and unexpected downtime while preserving surface quality. Predictable chip control and extended tool life Equipped with a dedicated D57 chipbreaker and an octagonal ODMT shape, the insert promotes controlled chip formation and evacuation. Controlled chip flow reduces recutting and heat concentration at the cutting edge, which extends usable life and helps maintain dimensional accuracy. The 15° clearance angle improves shear conditions and lowers cutting forces, yielding a balance between productivity and tool durability — a practical benefit for production environments focused on repeatable cycle times. Practical advantages for productive milling operations The combination of indexable geometry, a medium tolerance class (M) and the WSM35G sortation supports productive machining strategies: predictable edge behaviour, adaptable cutting conditions and a broad material scope. Because the insert is indexable, worn edges can be quickly rotated to a fresh cutting face, reducing changeover time and simplifying tool logistics. This promotes efficient use of toolholders and keeps machine uptime high without sacrificing component quality. Contact Metav Werkzeuge to specify ODMT0504ZZN‑D57 WSM35G inserts for current applications or to request tailored machining recommendations from our technical team Technical Data Article number: ODMT0504ZZN-D57-WSM35G-WALTER Label: Fräswendeschneidplatte ODMT0504ZZN-D57 WSM35G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Gold Grade: WSM35G Form: Achteck (octagonal) Chipbreaker: D57 Execution: T Tolerance class: M Facts Clearance angle: 15° Plate size: 05 Plate thickness: 04 Material applicability: S / M SKU: ODMT0504ZZN-D57-WSM35G-WALTER Special features Tiger·tec Gold coating Coated carbide grade WSM35G Suitable for stainless steels and heat‑resistant superalloys Octagonal ODMT geometry Designed for secure chip formation and edge stability FAQ What materials is this insert intended for? The ODMT0504ZZN‑D57 WSM35G insert is intended for stainless steels (M) and heat‑resistant superalloys/titanium (S), as reflected by the WSM35G grade and Tiger·tec Gold coating. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating increases abrasive and thermal resistance, helping the insert maintain a stable cutting edge and longer wear life when machining heat‑generating or abrasive materials. What is the significance of the D57 chipbreaker? The D57 chipbreaker is engineered to promote consistent chip formation and evacuation, reducing the chance of recutting and improving surface finish during milling operations. Can the insert be indexed to restore the cutting edge? Yes, the octagonal ODMT form allows multiple cutting edges to be indexed; worn faces can be rotated to a fresh edge to reduce tool change times and support continuous production. Which feature most improves process stability? The combination of WSM35G grade, Tiger·tec Gold coating and a 15° clearance angle contributes most to process stability by preserving edge integrity and reducing thermal and mechanical stress. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected brand names and trademarks are the property of their respective owners. Trademarks are mentioned for explanatory purposes only and do not indicate any affiliation between our company and the trademark owners. The offered item is an original, factory‑new product from the manufacturer.
ODMT0504ZZN-D57 WSM45X Wendeplatten - Walter Tools
Take advantage of the WSM45X grade and the D57 chipbreaker to achieve stable edges and reliable chip control when machining stainless steel and heat‑resistant alloys; combine that with the economical eight‑edge indexing for lower tooling cost and consistent process security. Order directly via Metav Werkzeuge or consult our technical team for application advice. ODMT0504ZZN-D57 WSM45X milling insert — octagonal, 15° relief — Walter Tools A high‑performance indexable milling insert, the ODMT0504ZZN-D57 WSM45X is designed for secure chip control and edge stability when machining stainless steel and heat‑resistant superalloys. High wear resistance WSM45X grade Optimised D57 chip control 15° relief for reliable engagement Eight‑edge octagonal indexability Consistent cutting in stainless steel and superalloys The WSM45X cutting grade is a coated carbide designed for demanding materials; its formulation supports stable cutting edges and helps to reduce build‑up at the cutting zone. The D57 chipbreaker promotes predictable chip formation, which improves surface quality and reduces rework. For machining stainless steel and heat‑resistant alloys, this combination lowers the risk of edge failure and contributes to fewer machine stops, resulting in more productive cycles per shift. Economical tool life through eight‑edge indexing An octagonal insert form with a thin 04 thickness and 05 size delivers eight usable cutting edges per insert, cutting tooling costs and downtime for edge changes. The insert’s 15° relief angle provides balanced chip evacuation and mechanical stability in interrupted cuts. Together, these characteristics enable a cost‑effective process that preserves cutter bodies longer and supports batch production where repeatability and tool economy are priorities. Process security and versatile mounting options Marked with a clear designation, ODMT0504ZZN‑D57 WSM45X is compatible with standard cutter bodies accepting ODMT‑style inserts and is supplied in a tolerance class M for reliable seating. The insert’s specification and geometry simplify cutting data selection and reduce setup time. With its focus on secure chip control and edge stability, the insert supports both serial production and demanding single‑part operations where consistent results are essential. For machining stainless steel and heat‑resistant alloys with reliable edge life, contact Metav Werkzeuge for supply and technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: ODMT0504ZZN-D57-WSM45X-WALTER Label: Fräswendeschneidplatte ODMT0504ZZN-D57 WSM45X Walter Tools Product type: Fräswendeschneidplatte Designation: ODMT0504ZZN-D57 WSM45X Facts Relief angle: 15° Tolerance class: M Plate size: 05 Plate thickness: 04 Special features Coating: coated carbide (WSM45X) Chipbreaker: D57 Plate form: octagonal Series: Walter Schneidstoffsorte - Serie offen Execution: T Material application: stainless steel and heat‑resistant superalloys (S / M) FAQ What materials is this insert suitable for? The ODMT0504ZZN‑D57 WSM45X insert is specified for stainless steel and heat‑resistant superalloys (S / M), offering stable edge behaviour and chip control for these challenging groups. How does the D57 chipbreaker help in practice? The D57 chipbreaker on this Walter Tools insert shapes and breaks chips consistently, reducing the risk of tangled chips and improving surface finish during machining of stainless and high‑temperature alloys. How many cutting edges are available per insert? The octagonal geometry provides eight usable cutting edges, improving cost efficiency by maximising edge count before replacement. What does the tolerance class M indicate? Tolerance class M ensures consistent seating and repeatable positioning in suitable ODMT tool holders, supporting process stability in serial production. Is the insert compatible with standard ODMT holders? The ODMT0504ZZN‑D57 designation indicates compatibility with ODMT‑style cutter bodies; verify holder specification against the insert designation for a precise fit. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ODMT0504ZZN-D57 WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold wear resistance and the versatile WSP45G grade for consistent chip control and extended tool life across steel, stainless steel and heat‑resistant alloys; order the ODMT0504ZZN-D57 WSP45G directly via Metav Werkzeuge or request application advice from the consultants. ODMT0504ZZN-D57 WSP45G milling insert — Tiger·tec Gold, for steel / stainless steel / titanium (Walter Tools) A robust ODMT0504ZZN-D57 WSP45G milling insert engineered for versatile finishing and semi‑finishing of steel, stainless steel and heat‑resistant alloys in industrial milling operations. Tiger·tec Gold PVD coating for extended tool life WSP45G grade for steel, stainless and superalloys Octagonal form for stable cutting engagement 15° clearance angle with D57 chipbreaker High process reliability through modern coating and grade The combination of the Tiger·tec Gold coating and the WSP45G carbide grade delivers tangible performance gains in repetitive milling tasks. The PVD‑based coating improves wear resistance and reduces flank wear, which translates into longer tool life and fewer indexings. For operations that prioritise consistent output and predictable tool change intervals, this insert provides a measurable improvement in uptime and process stability, particularly when machining demanding workpiece materials. Consistent chip control and improved surface finish The insert’s D57 chipbreaker and octagonal geometry produce predictable chip formation and evacuation, which helps to avoid chip re‑cutting and to maintain a steady cutting force. The positive geometry and 15° clearance angle support low cutting forces and a refined surface quality in finishing passes. Chipbreaker function explained: it shapes and segments the chip to reduce heat concentration and prevent long, stringy chips that can damage the workpiece or interrupt the process. Versatile application range with industrial interchangeability Designed for the ISO material groups P / M / S, this insert is suitable for unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys and titanium. The coded dimensions (size 05, thickness 04) and tolerance class M ensure repeatable fitment and dimensional conformity in standard indexable cutter bodies. The series’ focus on toughness and edge stability makes the grade particularly useful for mixed‑material shops that require a single insert family for several alloys, reducing tool inventory complexity while maintaining machining quality. For application support or to place an order for the Walter Tools Tiger·tec Gold ODMT0504ZZN-D57 WSP45G insert, contact Metav Werkzeuge for tailored advice and procurement: info@metav-werkzeuge.com • +49 2822 7131930 Technical data SKU: ODMT0504ZZN-D57-WSP45G-WALTER Product: milling insert Brand: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Facts Clearance angle: 15° Shape: octagonal (8‑sided) Size code: 05 Thickness code: 04 Tolerance class: M Chipbreaker: D57 Execution code: T Special features Coating: Tiger·tec Gold (PVD coated carbide) Material applicability: steel, stainless steel, superalloys/titanium Typical uses: finishing, semi‑finishing Range: indexable milling insert family FAQ What materials can be machined with this insert? The ODMT0504ZZN-D57 WSP45G insert is designed for ISO groups P / M / S, covering steel, stainless steel and heat‑resistant superalloys/titanium. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating increases wear resistance and helps maintain a stable cutting edge, which extends effective tool life under continuous milling. How does the D57 chipbreaker affect machining? The D57 chipbreaker controls chip shape and breakage to improve evacuation, reduce heat concentration and contribute to consistent surface finish. What does tolerance class M mean for toolholders? Tolerance class M ensures consistent insert dimensions and repeatable seating in compatible cutter bodies, aiding interchangeability and precise indexing. Is this insert suitable for finishing operations? Yes, the insert’s positive geometry, 15° clearance angle and stable grade make it well suited to finishing and semi‑finishing tasks with demanding materials. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com
ODMT0504ZZN-F57 WKP35G Wendeplatten - Walter Tools
Take advantage of a high-performance Tiger·tec Gold grade and the WKP35G coated carbide to achieve consistent, repeatable machining of steel and cast iron; the octagonal form and chipbreaker F57 deliver economical edge life and controlled chip formation. Order through Metav Werkzeuge or consult our specialists for process optimisation. ODMT0504ZZN-F57 WKP35G milling indexable insert — Tiger·tec Gold grade for steel and cast iron (Walter Tools) The ODMT0504ZZN-F57 WKP35G is a coated carbide milling insert engineered for productive machining of steel and cast iron, offering robust cutting-edge stability and reliable chip control for serial and job-shop production. Tiger·tec Gold coated carbide grade WKP35G Optimised for steel and cast iron machining Octagonal form for multiple indexable edges Chipbreaker F57 for controlled chip formation Consistent machining with a premium cutting grade The combination of Tiger·tec Gold technology and the WKP35G grade provides a coated carbide chemistry tuned for the thermal and abrasive demands of P and K materials. This results in stable cutting edges and predictable wear behaviour, which supports higher feed rates and longer tool life. For manufacturing engineers, the key benefit is improved process stability: fewer unexpected tool changes, more uptime and a measurable increase in parts-per-tool, which contributes directly to lower unit costs. Geometry that increases productivity and reduces downtime The octagonal plate form supplies several indexable edges, enabling rapid edge changes and efficient utilisation of the insert. The geometry includes a 15° clearance and a chipbreaker F57, designed to manage chip flow and reduce recutting. Together with tolerance class M, these features ensure repeatable seating accuracy in the cutter body and consistent surface finish. Shops see tangible gains in cycle time and a reduction in rework due to the reliably controlled machining behaviour. Clear material suitability and practical advantages Specified for the ISO groups P (steel) and K (cast iron), the grade adapts to the typical heat generation and chip types of these materials. The insert’s coating and substrate combination help to resist abrasive wear from cast iron and thermal softening when cutting steel. For production planning, this means a single insert type can cover a broad range of component families, simplifying tool inventories and improving changeover speed between jobs. Integration into production and selection guidance The insert’s robust design supports standard milling cutters where indexable plates are required; the ODMT0504ZZN-F57 WKP35G aligns with common cutter pockets and clamping systems for quick replacement. When selecting inserts, consider clamping rigidity and cutting parameters: the grade favours moderate to high cutting speeds with stable feeds to maximise the life of the Tiger·tec Gold coating. If additional process data is required for specific machine-tool combinations, the technical team at Metav Werkzeuge can supply cutting-parameter recommendations and compatibility checks. Contact Metav Werkzeuge for tailored application advice and to discuss how Walter Tools Tiger·tec Gold inserts can optimise machining of steel and cast iron; reach us at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: ODMT0504ZZN-F57-WKP35G-WALTER SKU: ODMT0504ZZN-F57-WKP35G-WALTER Product type: milling indexable insert / milling insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade/sort: WKP35G Designation: ODMT0504ZZN-F57 WKP35G Facts Clearance angle: 15° Plate form: octagonal Plate size: 05 Plate thickness: 04 Chipbreaker: F57 Tolerance class: M Special features Coating technology: Tiger·tec Gold Material: coated carbide (Hartmetall, beschichtet) Suitable for: steel (P) and cast iron (K) machining Multiple indexable edges due to octagonal form Designed for stable chip formation and edge life FAQ What materials is this insert suitable for? The ODMT0504ZZN-F57 WKP35G insert is specified for ISO groups P and K, meaning it is designed for machining steel and cast iron where the Tiger·tec Gold coating and WKP35G grade provide wear resistance and thermal stability. What is the purpose of the F57 chipbreaker? The chipbreaker F57 on this insert controls chip shape and evacuation during milling, reducing the risk of recutting and improving surface finish when machining steels and cast irons. How many cutting edges are available per insert? The octagonal plate form offers multiple indexable edges; the exact number depends on the insert design and how many edges are designated as usable in the cutter geometry, enabling economical edge changes. What does the tolerance class M mean for assembly? Tolerance class M indicates medium dimensional accuracy for the insert, ensuring consistent seating and repeatable positioning in the cutter pocket for stable machining results. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and product names are the property of their respective owners. Brand names and protected designations are used for explanation only. There is no connection between our company and the named brands beyond supplying original, factory-new products of the manufacturer.
ODMT0504ZZN-F57 WSM35G WSM35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WSM35G grade for secure cutting of stainless steels and heat‑resistant superalloys; the F57 chipbreaker and a 15° relief deliver reliable chip control and edge stability for continuous milling. Order the inserts directly via Metav Werkzeuge or ask our consultants for application-specific guidance. ODMT0504ZZN-F57 WSM35G indexable milling insert (Tiger·tec Gold) by Walter Tools A ODMT0504ZZN-F57 WSM35G indexable milling insert engineered for heavy machining of stainless steels and heat‑resistant superalloys in demanding industrial milling operations Tiger·tec Gold coating for edge stability Optimised F57 chipbreaker for consistent chips 15° relief angle for secure cutting action Octagonal form for multiple indexed positions Reliable cutting performance where toughness matters The ODMT0504ZZN-F57 WSM35G cutting insert combines a coated carbide substrate with the Tiger·tec Gold technology to address the specific challenges of machining stainless steels and heat‑resistant superalloys. The grade promotes stable edge behaviour under high thermal and mechanical load, which translates into fewer unscheduled tool changes and more predictable process windows. For workshop managers the clear advantage is longer effective tool life and reduced variability in surface finish when processing hard‑to‑cut materials. Consistent chip control and productivity gains A decisive production benefit is the F57 chipbreaker, which is configured to produce manageable chips even in sticky or gummy materials. Effective chip control prevents re‑cutting, reduces heat accumulation at the cutting edge and lowers the risk of built‑up edge formation. In practical terms, this means fewer interruptions, improved surface integrity and the possibility to run more aggressive feed‑rates while maintaining component quality — all contributing to enhanced throughput on milling machines. Geometry and application advantages for workshop use The octagonal insert form provides several indexed cutting edges per insert, allowing economical blade changes and quick re‑indexing. The 15° relief supports stable cut entry and reduced rubbing on the flank, improving dimensional consistency across long runs. Supplied as a milling indexable insert, it is suitable for a range of milling cutter bodies that accept the ODMT geometry and is especially effective in operations that demand process security, such as aerospace and power‑generation component production. Choose the Walter Tools Tiger·tec Gold grade WSM35G for dependable machining of stainless steels and superalloys — contact Metav Werkzeuge for tailored technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ODMT0504ZZN-F57-WSM35G-WALTER Designation: ODMT0504ZZN-F57 WSM35G Product type: Indexable milling insert Brand: Walter Tools Series: Tiger·tec Gold Numbers / Core technical data Relief angle: 15° Insert size: 05 Thickness: 04 Tolerance class: M Special features / Versions Octagonal form Chipbreaker: F57 Grade: WSM35G (coated carbide) Suitable for: stainless steels (M) and heat‑resistant superalloys / titanium (S) FAQ What materials is this insert designed for? The ODMT0504ZZN‑F57 WSM35G insert is intended for stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), offering thermal stability and secure chip formation for these difficult‑to‑cut materials. How does the F57 chipbreaker benefit production? The F57 chipbreaker on this Walter Tools insert creates controlled, short chips that reduce re‑cutting and heat build‑up, thereby improving surface finish and enabling longer uninterrupted machining cycles. How many cutting edges are available per insert? The octagonal geometry provides multiple indexable edges per insert; the exact number depends on the cutter and mounting orientation, but the shape is chosen to maximise usable edges for economical tool usage. Is the WSM35G grade coated and suitable for high temperatures? Yes, the WSM35G grade is a coated carbide belonging to the Tiger·tec Gold family, engineered for thermal and mechanical stress resistance during machining of demanding alloys. Which relief angle does the insert use and why is it important? The insert features a 15° relief angle, which reduces flank contact and supports stable cutting action, helping to maintain dimensional accuracy and minimise rubbing in heavy milling operations. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trade names and trademarks are the property of their respective owners. Mention of brand names serves explanatory purposes only and does not indicate any affiliation between Metav Werkzeuge and the trademark owners. The offered article is original, brand‑new merchandise from the manufacturer.
ODMT0504ZZN-F57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WSP45G grade for consistent edge stability and broad material capability; the octagonal form and 15° clearance angle support efficient indexing and reliable chip control. Order the insert via Metav Werkzeuge or request advice from our technical team for application-specific recommendations. ODMT0504ZZN-F57 WSP45G milling insert — Tiger·tec Gold, for steel, stainless steel and superalloys (Walter Tools) The ODMT0504ZZN-F57 WSP45G is a coated carbide milling insert engineered for versatile milling across P, M and S material groups, offering a balanced combination of wear resistance and stable chip formation for demanding shop-floor applications. Tiger·tec Gold coated carbide grade WSP45G Octagonal insert form for indexable use 15° clearance angle for stable cutting Suited for steel, stainless and superalloys Higher productivity through coating and grade optimisation The combination of the Tiger·tec Gold coating and the WSP45G grade delivers a measurable improvement in cutting edge life and process stability. Coating technology designed for milling reduces abrasive wear and helps maintain the cutting geometry under thermal load, which in turn extends tool life and reduces downtime. This is particularly relevant when machining steels and work-hardening stainless grades; the coating supports stable chip formation and prevents premature edge breakdown, enabling more productive feeds and longer tool cycles. Robust design for straightforward indexable milling The octagonal plate form provides multiple usable edges, making the component a cost-effective choice for indexable milling systems. The geometry with a 15° clearance angle and the F57 chipbreaker promotes secure chip control and consistent surface finishes over repeated indexing. The plate thickness and size are optimised for rigidity in light to medium-duty milling operations, and the construction supports predictable behaviour under varying cutting conditions. As a result, set-up times are minimised and the machining process can be standardised across similar operations. Broad material scope with clear application logic Rated for P / M / S, the grade covers conventional steels, stainless steels and heat-resistant superalloys or titanium alloys. The classification reflects tailored behaviour: the cutting grade manages the heat and adhesion tendencies typical of stainless steels, while remaining tough enough for many steel machining tasks and resilient under the thermal stress of superalloys. For workshop planners this means fewer grade changes and simpler tool inventories when working across mixed material batches. Practical recommendations for integration and handling The insert is intended for use in compatible milling cutters that accept the ODMT indexable geometry. Correct clamping and the use of appropriate cutting parameters—matching feed, depth of cut and coolant strategy to the material group—will leverage the grade’s strengths. The octagonal form enables several indexings per insert, so economical usage is achievable when tool management and inspection routines are in place. For assistance with parameter selection or mounting considerations, technical guidance is available from Metav Werkzeuge. For tailored application advice on the ODMT0504ZZN-F57 WSP45G Tiger·tec Gold milling insert from Walter Tools, please contact Metav Werkzeuge's technical team at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: ODMT0504ZZN-F57-WSP45G-WALTER Label: Fräswendeschneidplatte ODMT0504ZZN-F57 WSP45G Walter Tools Product type: Milling insert Brand: Walter Tools Series: Tiger-tec Gold Grade: WSP45G Facts Clearance angle: 15° Plate size: 05 Plate thickness: 04 Tolerance class: M Special features Insert form: Octagon Chipbreaker: F57 Material suitability: P / M / S Execution: T FAQ What materials is the ODMT0504ZZN-F57 WSP45G suitable for? The ODMT0504ZZN-F57 WSP45G is specified for machining steels (P), stainless steels (M) and heat-resistant superalloys/titanium (S) due to its Tiger·tec Gold coated carbide composition. How does the Tiger·tec Gold coating benefit milling operations? Tiger·tec Gold on the WSP45G grade enhances wear resistance and thermal stability, which improves edge life and stabilises chip formation during prolonged milling cycles. What advantages does the octagonal form provide for indexable milling? The octagonal geometry allows multiple usable edges per insert, supporting economical indexing and consistent reconditioning of the cutting edge within compatible milling systems. Manufacturer: Walter Tools (Walter Deutschland GmbH); Derendinger Straße 53; 72072 Tübingen; Germany
ODMT060512-D57 WKK25G WKK25G Wendeplatten - Walter Tools
Achieve reliable, high‑productivity cast‑iron machining with the combination of Tiger‑tec Gold coating and a 1.2 mm corner radius for improved tool life and consistent chip control; order the insert via Metav Werkzeuge or consult their application specialists for cutting data and optimisation. ODMT060512-D57 WKK25G milling insert — Walter Tools — Tiger‑tec Gold, 1.2 mm radius The ODMT060512-D57 WKK25G is a milling indexable insert engineered for productive machining of cast iron, combining a specialised chipbreaker with Walter Tools' Tiger‑tec Gold coating for process stability. Tiger‑tec Gold coating for wear resistance Optimised chipbreaker D57 for short chips 1.2 mm corner radius for stable cutting edge Increase throughput with a coated grade tuned for cast iron The combination of a coated cemented carbide grade and a purpose‑designed chipbreaker delivers consistent material removal in abrasive cast‑iron applications. The WKK25G grade, part of the Tiger‑tec Gold family, is formulated to resist abrasive wear while maintaining a stable cutting edge over extended cycles. For production environments the result is fewer tool changes and reduced downtime, which translates into measurable improvements in machining efficiency and predictable process windows. Secure chip control and surface quality on brittle materials Short, controlled chips are crucial when machining grey and nodular cast iron to avoid interruptions and protect the workpiece. The D57 chipbreaker is optimised for the typical short, breaking chips of cast‑iron work, enabling reliable evacuation and consistent surface finish. Combined with a 15° front angle and the octagonal insert form, the geometry supports stable engagement and repeatable performance, simplifying toolpath planning and reducing the risk of edge damage during heavy‑duty passes. Robust edge design for repeatable performance and cost efficiency A 1.2 mm corner radius and the proven Tiger‑tec coating provide a robust cutting edge that tolerates the abrasive characteristics of cast iron, extending indexable life and lowering unit machining costs. The insert’s tolerance class M and the coded plate thickness and size ensure interchangeability within systemised toolholders, aiding quick replacement and consistent runout behaviour. For contract manufacturers and job shops, this translates into reliable batch throughput and fewer scrap incidents. Application guidance and process assurance For challenging components or unfamiliar alloys, application data and trial parameters can make the difference between success and costly rework. Metav Werkzeuge supplies cutting data sheets and can recommend speeds, feeds and depth‑of‑cut settings matched to the WKK25G grade and the specific cast‑iron class. This practical support complements the product’s technical advantages and helps integrate the insert into established machining processes with confidence. Contact Metav Werkzeuge for bespoke cutting data and to order the ODMT060512-D57 WKK25G; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: ODMT060512-D57-WKK25G-WALTER Product: Milling indexable insert Brand: Walter Tools Grade: WKK25G (Tiger‑tec Gold) Facts Corner radius: 1.2 mm Free cutting angle: 15° Plate size: 06 Plate thickness: 05 Tolerance class: M Special features Chipbreaker: D57 Plate form: Octagon Coating: Tiger‑tec Gold Material code: K (cast iron applications) Series: Tiger‑tec Gold Execution: T FAQ What materials is this insert intended for? The ODMT060512-D57 WKK25G is specified for cast iron; the WKK25G grade is optimised for abrasive, short‑chipping cast‑iron machining. Which geometry provides chip control with this insert? Chip control is achieved by the D57 chipbreaker combined with the octagonal plate form and a 15° front angle, delivering short, predictable chips in cast‑iron cuts. How does the Tiger‑tec Gold coating benefit production? Tiger‑tec Gold enhances wear resistance and cutting‑edge stability under abrasive conditions, improving tool life and reducing the frequency of index changes. Is the insert suitable for heavy‑duty roughing? The robust 1.2 mm corner radius and coated grade offer good resistance to edge breakdown in high‑material‑removal conditions typical of cast‑iron roughing. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is original, brand‑new goods from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ODMT060512-D57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a versatile P/K grade for steel and cast iron, and a compact octagonal form for reliable chip control and extended tool life; order this insert directly via Metav Werkzeuge or consult the specialists for application support. ODMT060512-D57 WKP35G milling insert — Tiger‑tec Gold, for steel and cast iron — Walter Tools ODMT060512-D57 WKP35G is an octagonal milling insert with a Tiger‑tec Gold coated carbide grade, engineered for robust milling of steel and cast iron in both productive roughing and dependable finishing operations Tiger‑tec Gold coating for extended wear Suitable for steel and cast iron machining 15° clearance for controlled chip flow Octagonal form with 1.2 mm corner radius Consistent performance from Tiger‑tec Gold for demanding materials The Tiger‑tec Gold coating combined with the WKP35G grade provides a balanced solution for productive milling of steel and cast iron. As a coated carbide insert, it is designed to resist abrasive wear common with cast materials while coping with the thermal and mechanical loads present when cutting steels. This results in more stable machining conditions and extended tool life, which supports predictable cycle times and fewer insert changes in serial production. Controlled chips and edge strength minimise rework The D57 chipbreaker geometry and the 15° free clearance angle optimise chip formation and evacuation, reducing the risk of built-up edge and workpiece damage. The 1.2 mm corner radius gives a favourable compromise between edge strength and achievable surface finish, allowing both robust roughing passes and improved finishing where required. The octagonal plate form increases the number of indexable edges, improving cost efficiency per insert and reducing the need for frequent tool replacements. Practical suitability and process reliability in milling applications Designed for general-purpose milling tasks where steel and cast iron predominate, this insert supports a range of machining strategies from heavier material removal to controlled finishing runs. The coated grade helps maintain a stable cutting edge under varying conditions, contributing to reproducible surface quality and dependable cycle outputs. For application-specific parameter settings or to confirm compatibility with a particular toolholder or machine, Metav Werkzeuge provides tailored advice and process recommendations. Choose Walter Tools' Tiger‑tec Gold ODMT060512-D57 WKP35G insert for production-reliable milling and contact Metav Werkzeuge for application guidance or to arrange supply Technical data Article number: ODMT060512-D57-WKP35G-WALTER Product designation: ODMT060512-D57 WKP35G Product type: Milling insert Manufacturer: Walter Tools Data Free clearance angle: 15° Corner radius: 1.2 mm Plate size: 06 Plate thickness: 05 Tolerance class: M Chipbreaker: D57 Special features Series: Tiger‑tec Gold Grade: WKP35G (coated carbide) Material suitability: P (steel), K (cast iron) Plate form: octagonal (Achteck) Execution: T FAQ Which materials is this insert suitable for? The ODMT060512-D57 WKP35G insert from Walter Tools is specified for machining steel (P) and cast iron (K) according to the grade characteristics. What benefits does the Tiger‑tec Gold coating provide? Tiger‑tec Gold on the WKP35G grade improves wear resistance and thermal stability, helping the insert maintain a sharp cutting edge and consistent performance during extended milling cycles. What are the key geometry values to consider when programming cuts? Relevant values are a 15° clearance angle and a 1.2 mm corner radius; the D57 chipbreaker influences chip formation and evacuation during milling. Is this insert suitable for stainless steel? Stainless steel suitability is not indicated for this specific grade; the ODMT060512-D57 WKP35G is optimised for steel and cast iron applications. How does the octagonal plate form aid in production? The octagonal form provides multiple indexable edges and flexible orientation options, which increases the effective life per insert and supports economical tool usage in repetitive production runs. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group. The referenced brand names are used for explanatory purposes only and do not imply any affiliation between Metav Werkzeuge and the respective trademark owners. The offered article is original, factory-new merchandise of the manufacturer.
ODMT060512-D57 WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the octagonal geometry with a 15° clearance and 1.2 mm corner radius for consistent chip control and extended tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for cutting data and application advice. ODMT060512-D57 WPP35G indexable milling insert for steel – Tiger·tec Gold | Walter Tools The ODMT060512-D57 WPP35G is an octagonal indexable milling insert engineered for high-productivity milling of steel, featuring the Tiger·tec Gold coated carbide grade for improved wear resistance and stable edge performance. Tiger·tec Gold coated carbide Optimised chip control with D57 breaker 15° clearance for stable cutting Octagonal form with 1.2 mm corner radius Higher productivity through advanced coating and substrate The combination of the Tiger·tec Gold coating and the WPP35G coated carbide substrate provides a measurable improvement in cutting performance during steel machining. The coating technology reduces flank wear and enhances thermal resistance, which leads to longer tool life and fewer index changes on the toolholder. For production environments that prioritise cycle-time reduction, the improved wear behaviour translates into predictable tool change intervals and lower overall machining costs without sacrificing surface quality. Reliable chip control and consistent edge stability The dedicated D57 chipbreaker together with the octagonal geometry ensures controlled chip formation and evacuation when cutting steel. The insert’s 15° free angle and 1.2 mm corner radius contribute to reduced cutting forces and stable engagement, which supports consistent dimensional accuracy and repeatable surface finish. These geometry attributes are particularly beneficial in interrupted cuts and mixed-geometry components, where reliable chip flow reduces the risk of built-up edge and unplanned stoppages. Broad suitability for steel applications and process robustness Designed specifically for machining steel, the grade composition covers a wide range of steel types encountered in industrial milling. The insert balances toughness and wear resistance to handle both general-purpose and more demanding steel operations, delivering consistent results across batch runs. By selecting this insert within the Tiger·tec Gold series, process planners gain a tool that favours process stability and predictable outcomes, making it suitable for both jobbing shops and serial production. Practical benefits for the workshop and integration in setups The octagonal form offers multiple cutting edges per index, improving overall economy by extending the usable life of each insert. The insert’s nominal size code and thickness allow straightforward integration into common milling cutter bodies and toolholding systems. For users seeking tailored cutting data, Metav Werkzeuge provides application guidance and can assist with selecting cutter geometry and feeds/speeds to match specific machine capabilities and workpiece conditions. Contact Metav Werkzeuge for personalised cutting data and availability of the ODMT060512-D57 WPP35G insert and discuss suitable holders for the intended milling application Technical data Article number: ODMT060512-D57-WPP35G-WALTER Label: Fräswendeschneidplatte ODMT060512-D57 WPP35G Walter Tools Product type: Indexable milling insert Grade: WPP35G Series: Tiger-tec Gold Facts Free angle: 15° Corner radius: 1.2 mm Plate size: 06 Plate thickness: 05 Special features Coating: Tiger·tec Gold Substrate: coated carbide Chipbreaker: D57 Plate form: octagon Suitable for: steel FAQ What materials is this insert suited for? The ODMT060512-D57 WPP35G insert is formulated for machining steel, offering a balance of toughness and wear resistance suited to common unalloyed and alloyed steels. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WPP35G grade enhances thermal resistance and reduces flank wear, which results in longer tool life and more consistent machining performance during steel milling. What advantages does the octagonal form provide? The octagonal plate shape increases the number of usable cutting edges per insert, improving overall economy and reducing the frequency of insert replacement in production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (trading as Walter Tools) is among the world's leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. The described article is an original, factory-new product of the manufacturer.
ODMT060512-D57 WSM35G T Wendeplatten - Walter Tools
Take advantage of a high-performance, Tiger·tec Gold-coated grade combined with a controlled chipformer and octagonal geometry for reliable machining of stainless steels and heat-resistant alloys; order directly via Metav Werkzeuge or consult our specialists for cutting data and process recommendations. ODMT060512-D57 WSM35G indexable milling insert – Tiger·tec Gold coating, for stainless steels (Walter Tools) The ODMT060512-D57 WSM35G is an octagonal indexable milling insert engineered for demanding machining of rostfreie Stähle and heat‑resistant superalloys, offering thermal stability and secure chip control Tiger·tec Gold coating for thermal resistance Optimised chipformer D57 for stable chips Octagonal shape for multiple cutting edges 15° clearance angle for secure cutting geometry Thermal resilience and cutting-grade benefits for longer runs The combination of Tiger·tec Gold coating and the WSM35G grade provides a coated carbide solution optimised for high temperatures and abrasive conditions. This coating system increases resistance to flank wear and overheating, which directly translates into longer effective tool life and fewer insert changes during production. For operations that struggle with workhardening and built‑up edge when machining stainless steels, this performance-oriented grade supports consistent material removal rates and repeatable surface finish, reducing process variability and downtime. Geometry that controls chips and preserves edges The insert’s chipformer D57 and octagonal design work together to produce predictable chip shapes and breakage. The corner radius 1.2 mm and 15° clearance angle maintain a robust cutting edge while moderating cutting forces, which helps to avoid vibration and edge collapse on difficult alloys. Stable chip control reduces the risk of re‑cutting and tool damage, so cycle times remain steady and machine productivity improves. The multiple usable edges provided by the shape also increase cost efficiency per insert. Suited materials and process security for critical components This grade is targeted at ISO material groups M and S, making it suitable for stainless steels and heat‑resistant superalloys or titanium where heat concentration and poor thermal conductivity challenge conventional inserts. The formulation supports secure chip formation and edge integrity when machining tough or sticky materials, offering mechanical reliability and predictable wear behaviour. For shops producing aerospace, medical or chemical‑industry components, the combination of grade and geometry contributes to higher first‑piece yields and consistent surface quality. Practical compatibility, handling and selection advice Available in the common insert size and thickness specified by the designation, the ODMT060512-D57 WSM35G insert suits a wide range of milling cutters designed for indexable inserts and is manufactured to tolerance class M. Its robust construction and coated grade simplify process setup: moderate feeds with stable axial engagement typically yield the best balance between tool life and productivity. When integrating this insert, ensure toolholder rigidity and coolant strategy match the material and machining parameters to fully exploit the grade’s thermal advantages. Discuss specific applications and request tailored cutting data from Metav Werkzeuge to optimise machining performance with this Walter Tools grade Technical data SKU: ODMT060512-D57-WSM35G-WALTER Product: Indexable milling insert ODMT060512-D57 WSM35G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Clearance angle: 15° Corner radius: 1.2 mm Insert size: 06 Thickness: 05 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WSM35G (coated carbide) Chipformer: D57 Shape: octagonal Material suitability: stainless steels (M), superalloys/titanium (S) Product type: indexable milling insert FAQ What materials is this insert designed to machine? The ODMT060512-D57 WSM35G insert is engineered primarily for rostfreie Stähle and for heat‑resistant superalloys or titanium, corresponding to ISO groups M and S. How does the Tiger·tec Gold coating benefit performance? The Tiger·tec Gold coating on the WSM35G grade increases thermal resistance and wear protection, improving edge stability and extending life under high‑temperature cutting conditions. What does the chipformer D57 provide? Chipformer D57 is designed to create controlled chip shapes for reliable evacuation and reduced risk of recutting, supporting stable cutting in tough materials. Is the insert suitable for high‑speed milling? The coated carbide grade and robust geometry support elevated cutting speeds for the target materials, provided the toolholder and machine rigidity are adequate. How many edges are usable on the octagonal insert? The octagonal form offers multiple indexable cutting edges, increasing usable life per insert and improving economy in series production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names and trademarks are mentioned for explanation only; there is no affiliation between our company and the named manufacturers. The offered item is an original, factory‑new product of the manufacturer.
ODMT060512-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the robust WSP45G grade for reliable milling across a wide range of materials; combine high process security, stable chip formation and a compact octagonal design for efficient indexable insert changes — order directly via Metav Werkzeuge or ask our consultants if needed. ODMT060512-D57 WSP45G milling insert (Tiger·tec Gold, 15° clearance) — Walter Tools ODMT060512-D57 WSP45G is a precision milling indexable insert for versatile face and slot milling applications, optimised for demanding materials and stable chip control. Tiger·tec Gold PVD coating Suitable for Stahl, rostfreier Stahl and superalloys 15° clearance angle for secure cutting Corner radius 1.2 mm for robust edges High-performance coating and grade for consistent throughput The combination of the Tiger·tec Gold coating and the WSP45G carbide grade delivers a balance between wear resistance and edge toughness. This PVD-treated cutting grade is developed for long tool life under cyclic loads and supports stable chip formation in medium to high cutting speeds. The chipbreaker D57 provides predictable chip control, reducing the risk of built-up edge and interruptions in automated or manual milling cycles. Such technical choices translate directly into reduced downtime and more consistent part quality. Broad material compatibility with practical guidance Designed for the ISO material groups P / M / S, the insert is suitable for machining Stahl, rostfreier Stahl and heat-resistant superalloys including Titan. For Stahl, the coating and edge geometry manage typical heat generation and chip behaviour; for rostfreier Stahl, the grade promotes secure chip formation where toughness and adhesion are challenges; for S materials, the emphasis is on heat resistance and edge stability. Recommended starting parameters and adaptive feeds can be supplied to match the component material and machine rigidity. Geometry that improves edge life and indexability The octagonal form with a 1.2 mm corner radius and 15° clearance combines multiple usable cutting edges with a robust cutting corner for interrupted cuts and slotting operations. The compact insert size (designation 06, thickness 05) keeps the clamping footprint small while enabling quick index changes; octagonal geometry typically provides several indexable edges, making tool management economical. Tolerance class M ensures consistent seating and repeatable positioning across toolholders. Workshop benefits and process integration In practice, the insert's PVD coating and geometry reduce frequency of tool changes and support a wide range of milling strategies from high-feed to conventional slotting. The robust edge preparation assists in finishing passes while retaining the ability to withstand tougher roughing stages. For production lines seeking predictable cycle times and fewer rejects, this insert supports stable operation and straightforward tool inventory handling — backed by Walter Tools' reputation for precision tooling. For tailored cutting data, batch supply or to discuss application parameters for the Walter Tools Tiger·tec Gold range, contact Metav Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 — specialist advice and order assistance are available. Technical data SKU: ODMT060512-D57-WSP45G-WALTER Label: Fräswendeschneidplatte ODMT060512-D57 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte (milling indexable insert) Series: Tiger·tec Gold Sort: WSP45G ISO designation: ODMT060512-D57 WSP45G Facts Clearance angle: 15° Corner radius: 1.2 mm Plate form: Octagonal Plate size: 06 Plate thickness: 05 Tolerance class: M Chipbreaker: D57 Special features Coating: Tiger·tec Gold (PVD) Material compatibility: P / M / S (Stahl, rostfreier Stahl, superalloys/Titan) Execution: T Series description: PVD-coated carbide designed for versatile milling applications FAQ Which materials can be machined with this insert? The insert is specified for P / M / S materials; it machines Stahl, rostfreier Stahl and heat-resistant superalloys such as Titan effectively thanks to the Tiger·tec Gold coating and the WSP45G grade. What is the chip control solution for the insert? Chip formation is managed by the D57 chipbreaker; this geometry supports stable chips and reduces the risk of built-up edge during both roughing and finishing operations with the ODMT060512-D57 WSP45G insert. How many usable cutting edges does the octagonal insert provide? The octagonal design yields multiple indexable corners, enabling several renewed cutting edges per insert and economical tool usage in serial milling setups. What advantages does the Tiger·tec Gold coating offer? Tiger·tec Gold PVD coating increases wear resistance while maintaining edge toughness, which is beneficial under fluctuating loads and high-temperature cutting conditions encountered with difficult-to-machine materials. Is the insert suitable for automated production lines? Yes; the combination of consistent geometry, PVD coating and chip control makes the ODMT060512-D57 WSP45G well suited for automated milling processes where repeatability and reduced tool interventions are priorities. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for clarification only. The offered article is an original, factory-new product from the manufacturer; there is no affiliation between Metav Werkzeuge and the trademark owners.
ODMT0605ZZN-D57 WKK25G Wendeplatten - Walter Tools
Combining high wear resistance and reliable chip control, this insert delivers consistent productivity for cast-iron machining; benefit from the Tiger‑tec Gold coating and the WKK25G grade for longer tool life and stable edge performance — order or request application advice via Metav Werkzeuge. ODMT0605ZZN-D57 WKK25G milling indexable insert, Tiger‑tec Gold for cast iron — Walter Tools The ODMT0605ZZN-D57 WKK25G is an octagonal milling insert from Walter Tools engineered for productive, abrasion-resistant machining of cast iron components. Tiger‑tec Gold coating for long life WKK25G grade optimised for cast iron Octagonal shape for multiple cutting edges D57 chipbreaker for controlled chip formation Consistent lifetime and reduced tool changes The combination of the WKK25G grade with the Tiger‑tec Gold coating provides elevated wear resistance and reliable flank performance when machining cast iron. Coated carbide inserts resist abrasive attack better than uncoated grades, which translates into fewer tool changes and higher uptime on the machine. The octagonal geometry increases the number of usable cutting edges, reducing cost per edge and improving overall productivity. Explained simply, a tougher, coated grade keeps the cutting edge stable for longer, so surface finish and dimensional repeatability remain consistent across batches. Reliable chip control that stabilises the process A precise D57 chipbreaker and a 15° clearance angle are responsible for predictable chip formation and reduced cutting forces during interrupted cuts typical in cast-iron work. Controlled chip flow lowers vibration and heat input, which supports stable machining and better surface quality. The octagonal form also allows quick index changes, restoring a sharp edge within seconds and maintaining cycle times. For production environments where repeatability matters, this combination reduces scrap rates and helps keep production schedules on track. Application guidance and integration into the workflow The insert is delivered in the execution code T and tolerance class M, and it is explicitly designed for machining cast iron (material class K). As a coated carbide insert tailored to abrasive, brittle workpieces, it is suitable for both roughing and mixed finishing tasks when cutting parameters are chosen accordingly. For parameter recommendations, tool path strategies or to confirm compatibility with specific tool holders and cutters, Metav Werkzeuge can supply cutting data and integration advice by e‑mail or phone. Practical support and clear process recommendations help shorten ramp-up time and reduce the need for trial-and-error testing. Contact Metav Werkzeuge for tailored cutting data and application recommendations for Walter Tools Tiger‑tec Gold inserts, and request advice on holder compatibility and indexation strategies Technical Data SKU: ODMT0605ZZN-D57-WKK25G-WALTER Label: Fräswendeschneidplatte ODMT0605ZZN-D57 WKK25G Walter Tools Manufacturer: Walter Tools Product type: Milling indexable insert Series: Tiger‑tec Gold Grade: WKK25G Execution: T Tolerance class: M Facts Clearance angle: 15° Insert size: 06 Thickness code: 05 Chipbreaker code: D57 Special features Shape: Octagonal Coating technology: Tiger‑tec Gold (coated carbide) Material suitability: Cast iron (K) Multiple indexable edges for cost efficiency FAQ What materials is this insert intended for? This insert is optimised for machining cast iron; the WKK25G grade and Tiger‑tec Gold coating are selected for abrasive, brittle materials. How does the D57 chipbreaker affect performance? The D57 chipbreaker promotes controlled chip formation and reduced cutting forces, which supports process stability and improved surface quality when working with cast iron. Can the insert be indexed to restore cutting edges? Yes, the octagonal design provides multiple cutting edges that can be indexed to return a fresh edge, extending the usable life of each insert. Where can cutting data and holder compatibility be obtained? Metav Werkzeuge can provide cutting parameters and advice on tool holder compatibility to ensure optimal integration of these Walter Tools inserts. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ODMT0605ZZN-D57 WKP25S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver grade WKP25S and the D57 chipbreaker for extended tool life and reliable chip control; this results in consistent machining of Stahl and Gusseisen with fewer interruptions. Order the ODMT0605ZZN-D57 WKP25S directly via Metav Werkzeuge or request process advice from our consultants. Fräswendeschneidplatte ODMT0605ZZN-D57 WKP25S for Stahl and Gusseisen — Walter Tools A versatile milling indexable insert in ODMT format, optimised for high productivity applications in Stahl and Gusseisen using the Tiger·tec Silver coating technology. Tiger·tec Silver coated grade WKP25S For Stahl and Gusseisen machining Octagonal insert, 15° clearance angle Stable chipbreaker D57, size 06 High-performance grade for longer productive runs The WKP25S grade, part of the Tiger·tec Silver family, is designed to deliver wear resistance and consistent cutting performance in demanding milling operations. As a coated carbide grade, it balances toughness and hardness to resist abrasive wear typical when machining Stahl and Gusseisen. This balance reduces unscheduled tool changes and supports stable machining, leading to improved process reliability and a lower cost per component. The technology emphasises repeatable results across batch production. Clear material suitability and machining behaviour Selected for ISO groups P and K, the insert is suitable for Stahl (P) and Gusseisen (K). The coating and substrate combination supports the heat and chip formation conditions characteristic of these materials, helping to avoid premature edge breakdown. For operations where short, breaking chips or abrasive wear occurs, the insert’s grade and geometry help maintain surface quality and dimensional stability across successive passes. This makes it a practical choice for mixed-component production where both material types are present. Geometry and chip control that aid process stability The octagonal geometry and the D57 chipbreaker deliver reliable chip formation and evacuation, reducing recutting and the risk of tool-induced marks. The 15° clearance angle lowers flank contact and friction, which helps maintain a sharp cutting edge under interrupted cutting typical in milling. The ODMT format ensures compatibility with standard ODMT toolholders, providing a secure seat and predictable positioning for consistent indexation and repeatability in multi-edge utilisation. Shop-floor advantages and operator benefits By combining a robust grade with a proven chipbreaker, the insert supports smoother process flows and fewer interventions for chip management. Maintenance routines benefit from predictable wear patterns, and the insert’s tolerance class M supports consistent fit and interchangeability in tool assemblies. For operations aiming to increase throughput without compromising surface finish, this insert provides a balance of edge stability and chip control that contributes to higher overall productivity and fewer quality deviations. For application advice or to check availability of Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav Werkzeuge will assist with process matching and stock enquiries. Technical data Article number: ODMT0605ZZN-D57-WKP25S-WALTER Type: Fräswendeschneidplatte ISO designation: ODMT0605ZZN-D57 WKP25S Manufacturer: Walter Tools Series: Tiger·tec Silver Core specifications Insert size: 06 Thickness: 05 Clearance angle: 15° Tolerance class: M Chipbreaker: D57 Materials and features Grade: WKP25S Coating technology: Tiger·tec Silver Suitable for: Stahl (P) and Gusseisen (K) Shape: octagonal Format: ODMT FAQ What materials is this insert designed for? The ODMT0605ZZN-D57 WKP25S insert is specified for machining Stahl (ISO group P) and Gusseisen (ISO group K), combining a coated carbide grade with a chipbreaker tuned to these material characteristics. What does WKP25S and Tiger·tec Silver indicate? WKP25S is the Walter Tools grade classification within the Tiger·tec Silver coating technology, indicating a coated carbide designed for improved wear resistance and process stability in milling of Stahl and Gusseisen. How does the D57 chipbreaker improve milling? The D57 chipbreaker shapes and controls chip formation to produce short, manageable chips, aiding evacuation and reducing the risk of recutting; this supports consistent surface finish and safer machining with the ODMT0605ZZN-D57 WKP25S insert. Is the ODMT0605ZZN-D57 WKP25S compatible with standard ODMT holders? Yes, the insert follows the ODMT indexable insert format and is intended for use in matching ODMT toolholders, providing secure seating and repeatable positioning for multi-edge indexation. What advantage does the 15° clearance angle offer in practice? A clearance angle of 15° minimises rubbing on the flank face, reducing heat and friction during cutting; this helps to preserve the cutting edge and improve tool life under typical milling conditions. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. There is no connection between our company and the named brands; the item offered is an original, factory-new product of the manufacturer Walter Tools.
ODMT0605ZZN-D57 WKP35G Wendeplatten - Walter Tools
The combination of a Tiger‑tec Gold coated grade and a dedicated D57 chipbreaker delivers consistently high productivity and surface quality in steel and cast‑iron milling. Benefit from robust cutting geometry and secure seating for repeatable results. Order original Walter Tools inserts via Metav Werkzeuge or consult our specialists for application advice. ODMT0605ZZN-D57 WKP35G – Indexable milling insert, Tiger‑tec Gold, 15° relief (Walter Tools) A ODMT0605ZZN-D57 WKP35G indexable milling insert engineered for efficient machining of steel and cast‑iron components in production and jobbing environments Tiger‑tec Gold coated grade WKP35G Optimised for steel and cast‑iron machining 15° clearance angle for secure cutting geometry Octagonal 06 format with D57 chipbreaker Consistent productivity for steel and cast‑iron components The WKP35G grade from the Tiger‑tec Gold series is formulated for high demands in steel and cast‑iron machining. Coated carbide construction improves wear resistance and thermal stability, which results in extended tool life and fewer insert changes during long runs. Because the geometry is adapted to the heat and chip behaviour typical of these materials, the insert supports stable cutting conditions and repeatable part tolerances—important for maintaining a steady production flow and minimising unplanned downtime. Secure cutting geometry for better surface finish An integrated D57 chipbreaker combined with the octagonal plate form ensures controlled chip formation and evacuation, reducing the risk of chip re-cutting and tool edge overload. The 15° clearance angle helps maintain a constant engagement angle and protects the cutting edge during interrupted cuts. Together these features enhance surface finish and dimensional consistency, enabling reliable finishing passes with fewer operations. The design therefore supports both roughing and semi‑finishing steps in one tool set‑up. Practical handling and process reliability on the shop floor The octagonal 06 format and standard insert dimensions make handling and indexing straightforward, helping to keep set‑up times short. The coated grade and robust chip control promote process reliability, lowering scrap rates and increasing throughput. For production planners and machinists this means predictable performance over batch runs and simpler inventory management thanks to a widely used insert geometry and grade family. Material and application clarity Classified for ISO groups P and K, the grade is optimised specifically for unalloyed and alloyed steel as well as abrasive cast‑iron, addressing the typical heat generation and chip forms encountered in these materials. The coated microstructure of the Tiger‑tec Gold series contributes to stable edge retention and improved resistance against built‑up edge, which is particularly beneficial during continuous machining and higher cutting speeds. Contact Metav Werkzeuge for application‑specific recommendations and to secure the original Walter Tools Tiger‑tec Gold ODMT0605ZZN‑D57 WKP35G insert for your milling operations Technical data Article number: ODMT0605ZZN-D57-WKP35G-WALTER Label: Fräswendeschneidplatte ODMT0605ZZN-D57 WKP35G Walter Tools Manufacturer: Walter Tools Product type: Indexable milling insert Facts Clearance angle: 15° Plate size: 06 Plate thickness: 05 Tolerance class: M Special features Grade: WKP35G Series: Tiger‑tec Gold Applicable material groups: P / K (steel / cast‑iron) Plate form: Octagonal Chipbreaker: D57 Designation without grade: ODMT0605ZZN-D57 ISO designation: ODMT0605ZZN-D57 WKP35G FAQ What materials is this insert suitable for? The ODMT0605ZZN‑D57 WKP35G insert is intended for ISO groups P and K, meaning it is optimised for machining steel and cast‑iron applications. How does the Tiger‑tec Gold coating benefit cutting performance? The Tiger‑tec Gold coating on the WKP35G grade increases thermal stability and wear resistance, which enhances tool life and maintains cutting edge integrity during continuous milling cycles. Can the octagonal format be indexed multiple times? Yes, the octagonal 06 format permits multiple indexing positions, helping to extend usable life per insert and reduce tool change frequency. What is the role of the D57 chipbreaker? The D57 chipbreaker is designed to control chip shape and evacuation, improving surface finish and reducing the chance of chip re‑cutting or edge overload during interrupted cuts. Is this insert suitable for both roughing and finishing operations? With its controlled chip formation and stable cutting geometry, the insert supports roughing and semi‑finishing; process parameters should be selected according to the specific workpiece and machine capability. The Walter AG (brand: Walter Tools) with headquarters in Tübingen belongs to the Sandvik group and is among the leading manufacturers of precision tools for metalworking. Protected trademarks and product names are the property of their respective owners. The product described is an original, factory‑new item from the manufacturer.
ODMT0605ZZN-D57 WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WPP35G grade for extended tool life and consistent chip control in Stahl machining; benefit from the octagonal form and D57 chipbreaker for predictable performance. Order directly via Metav Werkzeuge or consult our specialists for machining data. ODMT0605ZZN-D57 WPP35G — milling indexable insert for Stahl, Walter Tools The ODMT0605ZZN-D57 WPP35G is a Tiger·tec Gold-coated milling insert engineered for robust, reproducible performance in a wide range of Stahl turning and milling applications. Tiger·tec Gold coated carbide grade WPP35G Designed for Stahl machining (ISO group P) Octagonal insert form with 15° relief Chipbreaker D57 for controlled chip formation Tolerance class M, insert size 06 Higher productivity through balanced wear resistance The combination of the Tiger·tec Gold coating and the WPP35G cut grade provides a balanced mix of wear resistance and toughness that is optimised for Stahl. The coating reduces adhesive wear and enhances thermal stability, so tool life is extended under typical production loads. With fewer insert changes, machine uptime is improved and total machining costs are lowered — a clear efficiency gain for production environments that prioritise throughput and predictable component quality. Repeatable accuracy and reliable chip control The octagonal geometry offers multiple cutting edges per insert, while tolerance class M and insert size 06 ensure consistent seating and repeatability in positive milling cutters. The chipbreaker D57 is designed for controlled chip formation when machining Stahl, reducing the risk of built-up edge and improving surface finish stability. These characteristics make the insert suitable where dimensional consistency and process reliability are required across batch production. Practical application and process guidance The insert is intended for machining tasks within the ISO P group (Stahl) and is suitable for a broad spectrum of unalloyed and alloyed steels thanks to its coated carbide substrate. As an octagonal milling insert with a 15° relief angle, it is best applied in milling cutters engineered for ODMT-style inserts and positive rake geometries. For optimal results, cutting parameters should be selected in line with workpiece grade and machine rigidity; detailed cutting data is available from Metav Werkzeuge for specific Stahl alloys and setups. The ODMT0605ZZN-D57 variant delivers predictable performance where a balance between wear resistance and toughness is needed. For precision Stahl milling with Tiger·tec Gold and the WPP35G grade, contact Metav Werkzeuge for stock information and application advice: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data Article number: ODMT0605ZZN-D57-WPP35G-WALTER Manufacturer: Walter Tools Product type: milling indexable insert Series: Tiger·tec Gold Grade: WPP35G Facts Insert size: 06 Plate thickness: 05 Relief angle: 15° Form: octagon Tolerance class: M Special features Chipbreaker: D57 Material group suitability: Stahl (ISO P) Execution: T Wendeplatte ISO designation: ODMT0605ZZN-D57 WPP35G FAQ What materials is this insert suitable for? The ODMT0605ZZN-D57 WPP35G milling insert is specified for the ISO P group and is suitable for machining a wide range of Stahl grades. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating on the WPP35G grade improves thermal stability and reduces adhesive wear, so the insert achieves longer life and more consistent performance in Stahl machining. What is the purpose of the D57 chipbreaker? The D57 chipbreaker is designed to produce controlled chip forms during milling operations, which supports improved surface finish and safer chip evacuation when machining Stahl. Is the ODMT0605ZZN-D57 available in other grades or series? This SKU denotes the ODMT0605ZZN-D57 in WPP35G within the Tiger·tec Gold series; alternative grades and series may be offered by Walter Tools for different workpiece demands. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The item offered is original, brand-new merchandise from the manufacturer.
ODMT0605ZZN-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WSM35G grade to achieve stable edge life and reliable chip control when machining stainless steel and high‑temperature alloys; order directly via Metav Werkzeuge or request tailored advice from our specialists for process optimisation. ODMT0605ZZN-D57 WSM35G indexable milling insert (15° clearance) by Walter Tools A ODMT0605ZZN-D57 WSM35G indexable milling insert designed for heavy milling of stainless steel and heat‑resistant superalloys, offering stable cutting edges and efficient chip formation Tiger·tec Gold coated carbide grade WSM35G Suitable for stainless steel and superalloys 15° clearance angle for secure cutting Octagonal form, size 06 High process reliability through advanced coating and grade The combination of Tiger·tec Gold coating and the WSM35G coated carbide grade provides a balance of wear resistance and edge toughness that suits demanding milling tasks. For components made from stainless steel or other heat‑resistant superalloys, this insert supports stable chip formation and reduces the tendency to build up material on the cutting edge. The result is a consistent surface finish and fewer index changes, which increases overall productivity and reduces cycle‑time variability. Durable geometry for controlled cutting and indexing economy The octagonal insert shape with size designation 06 and the integrated D57 chipbreaker enable multiple indexable cutting edges, improving cost efficiency per edge. The 15° relief angle contributes to reliable penetration and helps to manage contact stresses during interrupted or heavy cuts. This geometry is particularly useful where repeatable edge strength and controlled chip flow make a measurable difference in process yield and tool life. Clear advantages in application and handling Because the insert belongs to a Tiger·tec Gold family, it is optimised for heat and adhesion resistance; this supports machining strategies that demand both surface quality and tool endurance. The coated carbide composition reduces flank wear and helps maintain dimensional accuracy over longer tool life. As a consequence, workshop throughput benefits from fewer tool changes and reduced scrap rates when machining difficult materials. Integration into existing tool systems and process planning The ODMT form factor is compatible with many standard milling toolholders that accept octagonal indexable inserts; the insert’s specification supports straightforward replacement and re‑indexing. Planning for cutting data should consider the workpiece material group and the insert’s intended use for M and S groups (stainless steel and heat‑resistant alloys/titanium) to select appropriate feeds and speeds. The result is a more predictable machining process and a better return on tooling investment. For machining stainless steel and superalloys with high process reliability, contact Metav Werkzeuge for expert recommendations on Walter Tools Tiger·tec Gold inserts and specific cutting data: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: ODMT0605ZZN-D57-WSM35G-WALTER ISO designation: ODMT0605ZZN-D57 WSM35G Manufacturer: Walter Tools Series: Tiger‑tec Gold Numbers / Core Technical Data Clearance angle: 15° Insert size: 06 Thickness: 05 Tolerance class: M Execution: T Special features Grade: WSM35G (coated carbide) Coating technology: Tiger·tec Gold Shape: octagonal Chipbreaker: D57 Material suitability: stainless steel (M); heat‑resistant superalloys and titanium (S) FAQ What materials is this insert best suited for? The ODMT0605ZZN‑D57 WSM35G insert is optimised for stainless steel and heat‑resistant superalloys (material groups M and S), offering improved chip control and edge stability in these applications. How does the Tiger·tec Gold coating benefit machining? Tiger·tec Gold increases thermal and adhesive resistance on the cutting edge, which helps the WSM35G grade maintain a stable geometry and extend tool life during aggressive milling operations. What does the D57 chipbreaker provide? The D57 chipbreaker is designed to control chip flow for interrupted and heavy cuts, improving evacuation and reducing the risk of chip re‑cutting, which in turn supports consistent surface quality. Is the octagonal shape primarily for indexing economy? Yes, the octagonal form provides multiple usable cutting edges per insert, lowering the cost per edge and reducing downtime for replacements. Can this insert be used in standard ODMT toolholders? The ODMT designation corresponds to a common octagonal insert form that is compatible with many standard milling toolholders; process planning should confirm seat and clamping compatibility. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
ODMT0605ZZN-D57 WSM45X WSM45X Wendeplatten - Walter Tools
Benefit from the combination of a heat-resistant, coated carbide grade and effective chip control to maintain productive milling in demanding materials; reduced tool changes and stable cutting edges support continuous production. Order the ODMT0605ZZN-D57 WSM45X milling insert directly via Metav Werkzeuge or request application advice from the technical team. ODMT0605ZZN-D57 WSM45X milling indexable insert — 15° relief, octagonal (Walter Tools) A Walter Tools ODMT0605ZZN-D57 WSM45X milling insert engineered for secure chip formation when machining stainless steels and heat-resistant superalloys. Coated carbide grade WSM45X For stainless steels and superalloys 15° relief angle for stable cutting Octagonal insert with D57 chipbreaker High-performance grade for demanding alloys The Walter Schneidstoffsorte WSM45X is a coated carbide class designed specifically for materials that challenge conventional grades. Because the grade emphasises heat resistance and edge stability, it supports secure chip formation when machining tough, work-hardening materials such as stainless steels (ISO group M) and heat-resistant alloys (ISO group S). That technical focus reduces the risk of built-up edge and helps to sustain consistent component quality during longer production runs. Consistent chip control that raises productivity A dedicated D57 chipbreaker combined with the insert’s 15° relief angle and octagonal geometry delivers controlled chip flow and predictable cutting forces. The result is fewer unscheduled tool changes and a reduction in machine downtime, which translates directly into improved throughput. By ensuring stable edge life and repeatable performance, the insert supports economic machining strategies and simplifies process planning for serial production. Practical dimensions and workshop compatibility The ODMT geometry in size 06 with a thickness of 05 and a tolerance class of M is compatible with standard indexable milling holders designed for ODMT inserts. The octagonal shape offers multiple usable edges, increasing per-insert economy. Material suitability (M / S) and the open series configuration mean the insert is suitable for application-specific setups where heat resistance and edge robustness are required. For application optimisation or cutting data, Metav Werkzeuge provides technical support and further documentation. Contact Metav Werkzeuge for application support and stock information on Walter Tools ODMT0605ZZN-D57 WSM45X milling inserts — technical advice and rapid delivery options are available from Metav Werkzeuge. Technical Data Article number: ODMT0605ZZN-D57-WSM45X-WALTER Manufacturer: Walter Tools Product type: Milling indexable insert (Fräswendeschneidplatte) Grade: WSM45X Series: Walter Schneidstoffsorte - Serie offen Dimensions & Core Data Insert size: 06 Thickness: 05 Relief angle: 15° Tolerance class: M Materials & Special Features Coating / substrate: coated carbide Suitable for: stainless steels (M) and heat-resistant superalloys / titanium (S) Chipbreaker: D57 Shape: octagonal ISO designation: ODMT0605ZZN-D57 WSM45X FAQ Which materials are recommended for this insert? The ODMT0605ZZN-D57 WSM45X insert from Walter Tools is recommended for stainless steels (ISO group M) and heat-resistant superalloys (ISO group S); the grade supports secure chip formation and edge stability in these materials. What does the D57 chipbreaker provide? The D57 chipbreaker on the ODMT0605ZZN-D57 promotes controlled chip flow and reduced cutting forces, improving surface finish and extending edge life under the conditions typical for WSM45X. How does the octagonal shape affect tool economy? The octagonal geometry allows multiple indexing positions, which increases the number of available cutting edges per insert and improves cost-efficiency in serial production. What is the relevance of the 15° relief angle? A 15° relief angle balances strength and cutting action, helping to protect the cutting edge while maintaining effective material removal in demanding alloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
ODMT0605ZZN-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a 15° relief angle and the octagonal form for stable, economical milling of steels, stainless steels and heat‑resistant alloys; order directly via Metav Werkzeuge or consult our technical team for tailored cutting data and availability. ODMT0605ZZN-D57 WSP45G – Milling indexable insert with Tiger‑tec Gold coating (Walter Tools) ODMT0605ZZN-D57 WSP45G is a coated carbide milling insert designed for versatile face and slot milling in steel, stainless steel and heat‑resistant superalloys *Tiger‑tec Gold coating for high process stability *Suitable for steel, stainless steel and superalloys *15° relief angle for secure cutting geometry *Octagonal form ODMT06 with D57 chipbreaker Increased productivity through robust cutting performance The insert’s Tiger‑tec Gold PVD coating and the WSP45G grade combine to deliver stable chip formation and extended tool life when milling demanding materials. The tailored coating system improves wear resistance and reduces adhesion at the cutting edge, which directly increases machining uptime and lowers tooling costs per part. The design supports efficient heat management during heavy interrupted cuts, enabling higher metal removal rates while maintaining surface quality. Reliable versatility across common workshop materials Engineered for the ISO groups P, M and S, this geometry is suitable for unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys or titanium. The insert’s substrate and coating are developed to resist the high temperatures and strain typical of these materials, ensuring consistent cutting edge stability. For operations requiring predictable results across mixed batches of components, the grade offers an economical balance between wear resistance and toughness. Practical geometry for fast indexability and process security The octagonal form provides multiple usable edges, reducing tool change frequency and increasing effective cutting life per indexable insert. The D57 chipbreaker is optimised for controlled chip flow in a range of feeds and depths, improving operator safety and coolant effectiveness. The 15° relief angle secures the cutting geometry for stable engagement and predictable tool behaviour, which simplifies setup and reduces scrap rates in production environments. Discuss specific applications and request cutting data from Metav Werkzeuge; contact via info@metav-werkzeuge.com or call +49 2822 7131930 for availability and bespoke recommendations Technical Data Article number: ODMT0605ZZN-D57-WSP45G-WALTER Name: ODMT0605ZZN-D57 WSP45G Manufacturer: Walter Tools Facts Relief angle: 15° Insert size: 06 Insert thickness: 05 Tolerance class: M Special features Coating technology: Tiger·tec Gold Grade: WSP45G (PVD‑coated carbide) Chipbreaker type: D57 Form: octagonal (Achteck) Execution: T Material suitability: steel, stainless steel, heat‑resistant superalloys FAQ What materials can this insert machine effectively? This insert machines ISO groups P, M and S, meaning it is suitable for steel, stainless steel and heat‑resistant superalloys; the WSP45G grade is tuned for these applications. How does the Tiger‑tec Gold coating help in milling? The Tiger‑tec Gold coating increases wear resistance and reduces edge adhesion, resulting in improved process stability and longer life under the thermal and mechanical loads common in milling. How many cutting edges are available per insert? The octagonal form provides multiple indexable edges; actual usable edges depend on the selected cutting geometry and wear management practices for the specific operation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com