ODMT0605ZZN-F57 WKP35G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the WKP35G grade to achieve stable chip formation and long tool life in demanding milling operations; the octagonal geometry and chipbreaker F57 combine for reliable performance on steel and cast iron. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. ODMT0605ZZN-F57 WKP35G — Milling indexable insert, Tiger‑tec Gold, Walter Tools The ODMT0605ZZN-F57 WKP35G is an octagonal milling insert designed for high‑productivity roughing and finishing of steel and cast iron components within general milling applications Tiger‑tec Gold coating for long life WKP35G: coated carbide grade Octagonal form for multiple cutting edges Chipbreaker F57 for controlled chip formation Boosted productivity with predictable tool life The Tiger‑tec Gold coating together with the WKP35G grade delivers a reliable combination of wear resistance and edge stability that reduces unplanned tool changes. Designed as a coated carbide solution, the insert supports continuous production by resisting abrasive wear common when machining steel and cast iron. The result is a measurable increase in uptime and lower tool consumption per part, which improves process economics without compromising surface quality. Consistent cutting behaviour across common workshop materials Thanks to the chip geometry defined by the chipbreaker F57 and the octagonal form, the insert ensures controlled chip formation and evacuation during heavy milling passes. This geometry is particularly effective when cutting medium to high tensile steel and typical grey or nodular cast iron, where short, breaking chips and abrasive wear can otherwise reduce stability. The design therefore supports reproducible results across batch and single‑piece production. Geometry and relief angle for secure edge engagement The insert’s 15° relief and octagonal shape provide stable cutting engagement and multiple indexed edges for extended service life. The particular form number and the tolerance class M ensure repeatable seating and positional accuracy in compatible toolholders, which simplifies tool management and reduces set‑up time. For shops seeking a balance between robust machining and consistent surface finish, this geometry offers a pragmatic solution. Practical integration and application guidance Integration into standard milling systems is straightforward thanks to the common ODMT designation; the insert is supplied in the Tiger‑tec Gold series and matches holders that accept the ODMT0605 family geometry. For optimal results, select cutting parameters aligned with the workpiece material and the insert’s coated carbide characteristics. If specific cutting data or process recommendations are required, technical consultation is available to tailor feed and speed for the intended application. Contact Metav Werkzeuge to discuss Walter Tools Tiger‑tec Gold inserts and secure the optimal grade for intended milling tasks via phone or e‑mail Technical data SKU: ODMT0605ZZN-F57-WKP35G-WALTER Label: Fräswendeschneidplatte ODMT0605ZZN-F57 WKP35G Walter Tools Manufacturer: Walter Tools Facts Relief angle: 15° Plate size: 06 Plate thickness: 05 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WKP35G Chipbreaker: F57 Shape: octagonal Material suitability: Steel, Cast iron Execution: T Product type: milling indexable insert FAQ What materials is this insert suited for? The ODMT0605ZZN-F57 WKP35G insert is designed primarily for machining steel and cast iron, matching the grade characteristics of the Tiger‑tec Gold family for these workpiece groups. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on the WKP35G grade increases wear resistance and edge life, which supports longer tool cycles and more consistent part quality in repetitive milling tasks. Can the insert be indexed to use multiple cutting edges? Yes, the octagonal form and the ODMT family geometry allow multiple indexings, providing several usable edges before replacement and improving cost efficiency per edge. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the brands referenced. The offered item is an original, factory‑new product of the manufacturer.
ODMT0605ZZN-F57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of a high-performance Tiger·tec Gold grade and a precision F57 chipbreaker to secure stable chip formation and extended tool life; the result is efficient machining of stainless steels and heat-resistant alloys with predictable productivity. Order the ODMT0605ZZN-F57 WSM35G insert directly via Metav Werkzeuge or ask the consultants for tailored recommendations. ODMT0605ZZN-F57 WSM35G — indexable milling insert, Tiger·tec Gold, 15° clearance (Walter Tools) A robust ODMT0605ZZN-F57 WSM35G milling insert engineered for demanding applications in stainless steels and heat-resistant superalloys, designed to provide controlled chip evacuation and consistent cutting-edge stability during roughing and medium finishing operations Tiger·tec Gold coating for extended wear resistance WSM35G grade for stainless and superalloys Octagonal 06 insert with 15° clearance F57 chipbreaker for stable chip formation Durable coating and carbide grade for demanding materials The combination of the Tiger·tec Gold coating with the WSM35G coated carbide composition delivers a balance of wear resistance and thermal stability that benefits long, uninterrupted production runs. This formulation is optimised for materials classified as M and S according to ISO 513 — namely stainless steels and heat‑resistant superalloys/titanium — where poor heat conduction and adhesive wear demand a coating that protects the cutting edge. The result is less frequent index changes and a more predictable life cycle for the toolholder ensemble. Geometry that improves chip control and process security An octagonal insert form with a 15° clearance works together with the F57 chipbreaker to control chip shape and evacuation under varying cutting depths and feeds. The geometry reduces the tendency for built‑up edge on ductile materials, supporting a stable cutting edge and consistent surface quality on the workpiece. For milling operations where repeatability and reduced scrap are priorities, this insert geometry contributes directly to higher first‑pass yields and dependable cycle times. Productivity gains through longer life and consistent performance Designed for productive material removal, the insert’s configuration focuses on reproducible cutting behaviour rather than purely aggressive metal removal. The tool life advantages of the coated grade reduce downtime for index changes and regrinds, increasing overall productivity while lowering unit machining cost. With predictable wear patterns and robust edge integrity, planning for tool maintenance and inventory becomes simpler and more cost‑efficient in jobbing and series production alike. Practical versatility and installation notes for process planners The ODMT06 size and 05 thickness deliver compatibility with common milling cutters that accept size 06 indexable inserts; the standard 15° clearance accommodates a wide range of milling strategies from roughing to semi‑finishing. As an indexable insert it provides fast replacement and minimal setup interruption when wear occurs. For selection of the optimal cutter body and clamping system, Metav Werkzeuge can advise on seat geometry and grade pairing to match machine dynamics and workholding conditions. For secure, high‑process‑security machining with Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge to discuss the ODMT0605ZZN-F57 WSM35G insert and suitable cutter systems for stainless steels and superalloys Technical data SKU: ODMT0605ZZN-F57-WSM35G-WALTER Label: Fräswendeschneidplatte ODMT0605ZZN-F57 WSM35G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte / milling indexable insert ISO designation: ODMT0605ZZN-F57 WSM35G Series: Tiger‑tec Gold Facts Clearance angle: 15° Insert shape: Achteck (octagonal) Insert size: 06 Thickness: 05 Tolerance class: M Chipbreaker: F57 Grade / sort: WSM35G Execution: T Special features Coating technology: Tiger·tec Gold (coated carbide) Material suitability: stainless steels (M), heat‑resistant superalloys / titanium (S) Stable chip formation and edge security Designed for productive machining of difficult‑to‑machine materials FAQ What materials is this insert suited for? The ODMT0605ZZN‑F57 WSM35G insert is designed chiefly for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), where the Tiger·tec Gold grade supports thermal stability and edge life. How does the F57 chipbreaker help in milling operations? The F57 chipbreaker promotes controlled chip formation and evacuation; with the octagonal form and 15° clearance it reduces built‑up edge and improves surface consistency during medium to heavy milling. Can this insert be used for finishing passes? While optimised for roughing and semi‑finishing in tough materials, the coated grade and geometry allow for limited finishing applications depending on the cutter setup and feed/speed parameters. What are the key geometry details to consider when retrofitting a cutter? Important parameters include the insert size (06), thickness (05), 15° clearance and octagonal indexable form; these determine seat compatibility and clamping requirements in the cutter body. Is this an original Walter Tools product? This is an original, factory‑new Walter Tools indexable milling insert produced in the Tiger·tec Gold series and graded WSM35G for challenging materials. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between the seller and the named brands. The offered article is an original, factory‑new product of the manufacturer Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
ODMT0605ZZN-F57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold performance and the versatile WSP45G grade for stable chip formation and extended edge life, ensuring smooth milling across steel, stainless steel and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. ODMT0605ZZN-F57 WSP45G milling insert – Walter Tools (Tiger·tec Gold, 15°) The ODMT0605ZZN-F57 WSP45G is a coated carbide milling insert from Walter Tools, engineered for reliable performance in steel, stainless steel and high‑temperature alloys with a 15° relief angle. Tiger·tec Gold PVD coating Versatile for steel, stainless steel, superalloys Octagonal form with 15° relief angle Stable chip control F57 chipbreaker Boosted productivity through a heat‑resistant grade The combination of Tiger·tec Gold coating and the WSP45G cutting grade delivers a measurable advantage when milling demanding materials. The PVD coating increases thermal resistance and reduces flank wear, which in turn stabilises tool life and cutting results. This grade is explicitly designed for the typical heat and chip formation during steel machining while also coping with the challenges of stainless and heat‑resistant superalloys, so production processes run with fewer interruptions and more predictable edge life. Stable machining and predictable edge life for process security The insert geometry, featuring an octagonal form and a dedicated F57 chipbreaker, promotes consistent chip control and balanced cutting forces. A stable chipformer reduces the risk of built‑up edge and improves surface finish, particularly in interrupted or mixed cutting conditions. The tolerance class M and the robust geometry help maintain repeatability across tool changes, supporting process reliability and lowering scrap rates in routine milling operations. Practical handling and application benefits in everyday milling With a 15° relief angle and compact dimensions (size 06, thickness 05), the insert combines accessibility with multiple indexing positions for cost‑effective use. The grade supports cutting across the ISO material groups P / M / S, enabling flexible job planning and reduced tooling complexity. For shops prioritising efficiency, the insert’s balanced design reduces downtime for tool changes and simplifies grade selection, while the coating and chipbreaker work together to extend productive cutting intervals and improve overall operation efficiency. For high process security and versatile material performance, contact Metav Werkzeuge to specify the Walter Tools ODMT0605ZZN-F57 WSP45G for the next milling operation — our technical consultants provide application advice and cutting data tailored to the task. Technical data Article number: ODMT0605ZZN-F57-WSP45G-WALTER Description: ODMT0605ZZN-F57 WSP45G milling insert Series: Tiger·tec Gold Grade: WSP45G Facts Relief angle: 15° Shape: octagonal (Achteck) Size: 06 Thickness: 05 Tolerance class: M Special features Coating: Tiger·tec Gold (PVD coated carbide) Material suitability: steel, stainless steel, heat‑resistant superalloys (P / M / S) Chipbreaker: F57 Execution: T Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The ODMT0605ZZN-F57 WSP45G insert is designed for machining steel, stainless steel and heat‑resistant superalloys, corresponding to the ISO groups P, M and S. How does the Tiger·tec Gold coating benefit milling operations? The Tiger·tec Gold coating on the WSP45G grade improves thermal resistance and wear protection, which enhances edge life and supports consistent surface quality during demanding milling. What advantage does the F57 chipbreaker provide? The F57 chipbreaker promotes controlled chip formation and evacuation, reducing the likelihood of built‑up edge and improving process stability in a wide range of milling applications. Is the insert suitable for interrupted cutting? Yes, the insert’s geometry and robust coating make it suitable for interrupted and mixed milling tasks where reliable chip control and edge stability are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, brand‑new product from the manufacturer; Walter Tools is mentioned to identify the product.
ODMW050408-A57 WAK15 Wendeplatten - Walter Tools
Take advantage of precise aluminium machining with the combination of a sharp uncoated carbide grade and an A57 chipbreaker that reduces built-up edge; the octagonal form and 15° relief ensure stable engagement and consistent surface quality. Order the insert directly via Metav Werkzeuge or ask the consultants for tailored application advice. ODMW050408-A57 WAK15 — Milling indexable insert, 15° relief, for aluminium — Walter Tools A ODMW050408-A57 WAK15 milling indexable insert designed for efficient high-quality machining of aluminium and non-ferrous metals with a sharp cutting geometry and dedicated chip control. WAK15 uncoated carbide for non-ferrous metals 15° relief angle for optimised engagement 0.8 mm corner radius for fine surface finish A57 chipbreaker reduces built-up edge in aluminium Lower machining costs through focused geometry and material choice The combination of the WAK15 cutting grade and uncoated carbide substrate targets the specific demands of aluminium and other non-ferrous materials. This composition delivers a sharp, durable cutting edge that reduces cutting forces and minimises material adhesion. The result is more productive cycles and extended edge life compared with non-specialist inserts. The choice of a dedicated grade for N‑materials provides a clear, measurable benefit in throughput and tool-change intervals, supporting leaner production planning and fewer unplanned stops. Reliable chip control for consistent process security Built-in A57 chipbreaker geometry promotes controlled chip formation and evacuation, which directly reduces the risk of built-up edge and surface defects when machining softer, sticky materials. Controlled chip flow also lowers the chance of re-cutting and tool damage, improving process security and component quality. For operators unfamiliar with chipbreaker design: it is a micro-geometry that shapes how the swarf breaks and moves away from the cutting zone, helping to maintain a steady cutting condition throughout the life of the insert. Geometry that improves surface finish and repeatability The octagonal form combined with a corner radius of 0.8 mm and 15° relief gives a balanced contact between cutting edge and workpiece, translating into a finer surface finish and predictable tool behaviour. The relieved flank angle reduces rubbing on the freshly cut surface, which is particularly beneficial when tight tolerances and repeatable part quality are required in serial production. This geometric setup supports stable machining strategies, especially at moderate to high feed rates typical for non-ferrous operations. Practical selection and clamping considerations The insert’s octagonal shape allows multiple effective cutting edges per index, improving economy in cyclic production. When mounting the indexable insert, verify seat type and clamping torque to ensure correct positioning and heat transfer; a secure clamping arrangement preserves edge life and repeatability. For customers integrating this insert into existing toolholders, the format and size code simplify replacement planning and spare-part logistics, reducing downtime during tool changes. Contact Metav Werkzeuge for individual cutting data, holder compatibility checks and to secure supply of the Walter Tools ODMW050408-A57 WAK15 insert — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: ODMW050408-A57-WAK15-WALTER SKU: ODMW050408-A57-WAK15-WALTER Designation: ODMW050408-A57 WAK15 Brand: Walter Tools Product type: Milling indexable insert Facts Corner radius: 0.8 mm Relief angle: 15° Plate thickness code: 04 Plate size code: 05 Tolerance class: M Special features Chipbreaker: A57 Cutting grade: WAK15 (uncoated carbide) Series: Walter N‑Sortensystem Insert shape: Octagonal Application: suitable for aluminium and other non‑ferrous metals FAQ Is this insert suitable for high‑speed aluminium milling? Yes. The WAK15 grade and A57 chipbreaker are optimised for aluminium at moderate to high cutting speeds, providing improved chip control and reduced tendency for material adhesion. Which toolholders are compatible with this insert format? Compatibility depends on the clamping system; the ODMW050408-A57 WAK15 follows standard indexable insert dimensions for its size code and is compatible with holders designed for this insert family. How does the A57 chipbreaker affect surface quality? The A57 chipbreaker promotes consistent chip breakage and evacuation, which reduces re-cutting and helps achieve a smoother surface finish when machining aluminium. Can this insert be used for brass or copper? Yes. The WAK15 cutting grade is intended for non‑ferrous materials, so it is suitable for machining brass and copper with appropriate cutting data. How many cutting edges are available on an octagonal insert? An octagonal insert provides multiple indexable edges; the exact usable edge count depends on the insert design and whether all edges are identical, allowing economical edge rotation for extended service life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is part of a worldwide group of precision tooling manufacturers. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are cited for explanation only. There is no connection between our company and the named brands. The offered item is original, brand‑new merchandise from the manufacturer.
ODMW050408-A57 WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, a 0.8 mm corner radius for reliable surface finish, and an octagonal geometry that increases usable cutting edges for economical cast iron production – order through Metav Werkzeuge or consult the technical team for process-matched selection. ODMW050408-A57 WKK25G milling indexable insert — Tiger·tec Gold for cast iron (Walter Tools) A robust ODMW050408-A57 WKK25G milling insert designed for stable, high‑productivity machining of cast iron components in industrial milling operations Tiger·tec Gold coating for extended tool life Optimised for abrasive cast iron machining 15° free angle for stable cutting geometry Octagonal form enables multiple indexings Maximise productivity and consistency in cast iron milling The combination of the Tiger·tec Gold technology and the WKK25G grade delivers a high level of wear resistance tailored to abrasive cast iron conditions. The coated carbide substrate is engineered to withstand the typical short, breaking chips of grey and nodular cast irons, which reduces flank wear and extends the interval between edge changes. This results in measurable productivity gains and fewer unscheduled tool swaps during batch production, supporting steady cycle times and predictable output. Stable cutting geometry for improved surface quality A 15° free angle together with a 0.8 mm corner radius preserves edge strength while providing a controlled engagement with the workpiece. The moderate corner radius helps to balance edge robustness with achievable surface finish, making the insert suitable where consistent part tolerances and repeatable finishes are required. The A57 chipbreaker is formed to control chip fragmentation in discontinuous cast iron cutting, improving evacuation and reducing the risk of built-up edge. Economical indexing and process security The octagonal geometry increases the number of usable cutting edges per insert, lowering cost per cutting edge and reducing tooling consumption over time. With a tolerance class of M, this insert supports reproducible clamping and stable seating in indexable holders, which contributes to process reliability and predictable tool life. The design emphasises efficiency for medium‑to‑high production runs where tool change downtime must be minimised. Application scope and industrial benefits Specifically developed for the machining of cast iron (ISO group K), this insert suits shoulder milling, ramping and interrupted cuts commonly encountered in automotive, pump and valve component production. The WKK25G grade combines good wear properties with universality across cast iron types, enabling flexible use in mixed production environments. For workshops aiming to improve throughput while maintaining surface integrity, this insert offers a pragmatic balance of performance and cost effectiveness. For tailored advice on integrating the Walter Tools Tiger·tec Gold insert into existing milling processes, contact Metav Werkzeuge for application guidance and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ODMW050408-A57-WKK25G-WALTER Designation: ODMW050408-A57 WKK25G Manufacturer: Walter Tools Series: Tiger·tec Gold Material application: Cast iron (K) Facts Free angle: 15° Corner radius: 0.8 mm Insert size: 05 Thickness: 04 Tolerance class: M Special features Chipbreaker: A57 Plate form: Octagonal Grade: WKK25G Target material group: K (cast iron) Coating/technology: Tiger·tec Gold FAQ What types of workpiece material is this insert designed for? The ODMW050408-A57 WKK25G insert is designed for machining cast iron (ISO group K); the WKK25G grade and Tiger·tec Gold technology are optimised for abrasive, breaking chips typical of cast iron. How does the A57 chipbreaker affect machining performance? The A57 chipbreaker promotes controlled chip fragmentation for discontinuous cast iron cuts, aiding chip evacuation and reducing the likelihood of built‑up edge when using the Walter Tools insert. How many cutting edges are available per insert? The octagonal form allows multiple indexings, increasing the number of usable edges and lowering the cost per edge for the ODMW050408-A57 WKK25G indexable insert. What advantages does the 15° free angle provide? The 15° free angle offers a balance between cutting edge engagement and edge strength, contributing to stable cutting geometry and consistent surface finish when machining cast iron. Is the WKK25G grade suitable for mixed production environments? Yes; WKK25G is a versatile Walter Tools grade within the Tiger·tec Gold family, offering wear resistance and robustness suitable for a range of cast iron types and production demands. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are used solely for explanation and identification purposes; there is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
ODMW050408-A57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a robust WKP25S carbide grade and the A57 chipbreaker for consistent chip control and long tool life; purchase this insert directly via Metav Werkzeuge or consult the Metav team for application advice. ODMW050408-A57 WKP25S — Walter Tools milling indexable insert for steel and cast iron, 15° relief ODMW050408-A57 WKP25S is an octagonal milling insert designed for productive roughing and finishing in steel (P) and cast iron (K) Tiger·tec Silver coated for wear resistance WKP25S grade for stable performance Octagonal shape for multiple edges 15° relief angle for secure cutting Increase machining uptime with a wear-resistant coated grade The Tiger·tec Silver series provides a coated carbide construction that improves resistance to abrasive wear and thermal loading. This results in more consistent tool life under the variable temperatures and chip formation typical when machining steel and cast iron. The WKP25S grade is engineered for general steel and cast-iron applications and balances edge robustness with reliable performance, making it suitable where operators require predictable indexable insert behaviour rather than frequent tool changes. Better chip control and process stability for higher productivity The integrated A57 chipbreaker and the 15° relief geometry support controlled, repeatable chip formation and evacuation. Controlled chips reduce the risk of recutting and machine downtime, improving cycle time and surface consistency. The octagon form provides multiple usable cutting edges per insert, which enhances economy per edge and lowers changeover frequency. In practice, this leads to improved process security and fewer interruptions on the shop floor. Practical benefits for workshop integration and part quality With a compact plate size and a 0.8 mm corner radius, the insert enables stable cutting engagement while delivering acceptable surface finish on roughing and semi-finish operations. The nominal plate thickness and standard dimensions ensure compatibility with common Walter milling cutter bodies and clamping systems, facilitating straightforward inventory management. For engineers seeking a balance of productive material removal and repeatable results, this insert offers a pragmatic compromise between cutting performance and tool-life economy. Contact Metav Werkzeuge for tailored selection and fast supply of Walter Tools Tiger·tec Silver inserts; reach out via info@metav-werkzeuge.com or call +49 2822 7131930 for application support and availability Technical data Article number: ODMW050408-A57-WKP25S-WALTER SKU: ODMW050408-A57-WKP25S-WALTER Designation: ODMW050408-A57 ISO designation: ODMW050408-A57 WKP25S Facts Free angle: 15° Corner radius: 0.8 mm Plate size: 05 Plate thickness: 04 Special features Series: Tiger·tec Silver Grade: WKP25S (coated carbide) Chipbreaker: A57 Plate form: octagon Application: steel (P) and cast iron (K) Execution: W Tolerance class: M FAQ What materials is this insert designed for? This insert is designed primarily for machining steel (P) and cast iron (K), using the WKP25S grade and Tiger·tec Silver coating to handle the typical wear and chip formation of these groups. How does the A57 chipbreaker affect performance? The A57 chipbreaker promotes controlled chip formation and evacuation, which enhances process stability and reduces the chance of recutting when using the ODMW050408-A57 WKP25S insert. What are the key geometry advantages of this insert? The octagon form and 0.8 mm corner radius increase the number of indexable edges and provide a compromise between edge strength and achievable surface finish when milling. Is this insert compatible with standard Walter cutter bodies? The insert uses standard dimensions and thickness typical for Walter systems; compatibility is generally assured with matching Walter milling cutter bodies that accept the ODMW050408 series. Can this insert be used for finishing operations? Yes—while primarily suited for productive roughing and semi-finishing, the combination of grade, radius and chipbreaker supports acceptable finishes in many finishing scenarios. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, brand-new goods from the manufacturer.
ODMW050408-A57 WPP35G W - Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, the WPP35G grade and the A57 chipbreaker for dependable steel machining; order the ODMW050408‑A57 WPP35G directly via Metav Werkzeuge or consult our specialists for process integration ODMW050408-A57 WPP35G — Milling insert, Tiger‑tec Gold, A57 chipbreaker (Walter Tools) The ODMW050408‑A57 WPP35G is a coated carbide milling insert designed for demanding steel machining, offering stable chip control and extended tool life in production environments Tiger‑tec Gold coating for long tool life WPP35G grade optimised for steel A57 chipbreaker for consistent chip control 15° clearance angle, 0.8 mm corner radius Durable cutting performance for steel production The insert combines Tiger‑tec Gold coating with the WPP35G grade to deliver high wear resistance and predictable tool life when machining steels (ISO P). The multilayer coating reduces thermal and abrasive wear, which leads to fewer tool changes and longer uninterrupted runs on the shop floor. As a result, the solution supports higher throughput and lower process costs, while the coated carbide substrate maintains a reliable cutting edge under typical steel cutting temperatures. Improved chip control and surface finish With the A57 chipbreaker and octagonal geometry, the insert promotes controlled chip formation and evacuation, reducing recutting and the risk of built‑up edge. The defined 0.8 mm corner radius and 15° clearance angle help to stabilise the cutting edge and produce a consistent surface quality on workpieces. These features are particularly beneficial in face and shoulder milling operations where repeatable finishes and predictable chatter behaviour are required. Compatibility and production reliability Tolerance class M, form octagon and the plate size and thickness codes ensure compatibility with standard clamping systems and toolholders used in serial production. The octagonal shape provides multiple indexable edges, increasing tool economy per insert and reducing tooling logistics. The overall design supports process repeatability and reduces machine downtime by extending run lengths between insert changes. Practical selection guidance and material suitability This insert is intended primarily for steel applications under the ISO P classification; the WPP35G grade balances toughness and wear resistance for universal steel machining tasks. The coated carbide construction is suited to the heat and chip conditions encountered when cutting unalloyed and alloyed steels, offering a robust choice for general milling operations. For specific cutting parameters or alternative material groups, consult the technical advisors to align the insert selection with feed rates and spindle speeds. For technical advice on integrating the Walter Tools Tiger‑tec Gold inserts or to place an order, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our specialists will advise on the best configuration for the application Technical Data SKU: ODMW050408-A57-WPP35G-WALTER Name: ODMW050408-A57 WPP35G Manufacturer: Walter Tools Product type: Milling insert Facts Clearance angle: 15° Corner radius: 0.8 mm Thickness code: 04 Plate size code: 05 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP35G Chipbreaker: A57 Shape: Octagon Coated carbide Application: Steel (ISO P) Execution: W FAQ What materials is this insert suitable for? The ODMW050408‑A57 WPP35G is designed for machining steels and is optimised for the ISO P material group, offering a balance of toughness and wear resistance for alloyed and unalloyed steels. How does the A57 chipbreaker affect machining? The A57 chipbreaker on this Walter Tools insert promotes stable chip formation and evacuation, which helps to reduce recutting and improves surface finish in typical milling operations. Is the insert compatible with standard indexable toolholders? Yes, the octagonal form and tolerance class M indicate compatibility with standard clamping systems for indexable milling inserts, allowing multiple edges per insert for economical use. What is the benefit of Tiger‑tec Gold coating here? The Tiger‑tec Gold coating enhances wear resistance and thermal stability, extending tool life during steel machining and enabling longer uninterrupted production cycles. Can this insert be used for finishing and roughing operations? The WPP35G grade is versatile; it provides enough toughness for roughing while maintaining wear resistance suitable for many finishing passes. Final parameter tuning depends on the specific machine and workpiece setup. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The item offered is original, factory‑new goods of the manufacturer.
ODMW050408T-A27 WKK25G Wendeplatten - Walter Tools
Take advantage of the WKK25G Tiger·tec Gold cutting grade and the A27 chipbreaker for reliable machining of cast iron; the octagonal form and 0.8 mm corner radius deliver consistent edge life and predictable performance. Order the inserts directly via Metav Werkzeuge or consult the Metav team for application-specific advice. ODMW050408T-A27 WKK25G milling indexable insert by Walter Tools — Tiger·tec Gold, for cast iron, A27 chipbreaker ODMW050408T-A27 WKK25G is a milling indexable insert designed for productive machining of cast iron components, combining a Tiger·tec Gold grade with an A27 chipbreaker and octagonal geometry. Tiger·tec Gold cutting grade WKK25G Optimised for cast iron machining A27 chipbreaker for reliable chip control 15° clearance for stable engagement 0.8 mm corner radius for extended edge life Stable chip control reduces interruptions and protects the process The Tiger·tec Gold WKK25G grade is formulated for the abrasive nature of cast iron, offering improved wear resistance compared with uncoated grades. The A27 chipbreaker actively shapes and breaks chips into manageable lengths, reducing the risk of entanglement and machine stoppages. This combination results in fewer interruptions, more predictable cycle times and a measurable gain in machining throughput. Coated carbide construction ensures the insert withstands high local temperatures and abrasive contact typical of cast materials. Predictable edge life for consistent quality and lower tooling costs An 0.8 mm corner radius distributes cutting forces over a larger area, which delays flank wear and reduces the frequency of indexings. The octagonal geometry enables multiple indexing positions, extending the effective life per insert and lowering tooling spend per component. The 15° free angle reduces axial engagement, stabilising cutting forces and improving surface finish on interrupted cuts. Together, these geometric features support repeatable results and minimise process variation in daily production. Faster setup and easier machining decisions on the shop floor The ISO-style designation and standard form factor make the insert straightforward to fit into existing milling holders and tool bodies. As an indexable insert, it removes the need for resharpening and simplifies inventory management: worn edges are rotated or replaced quickly, restoring cutting performance within minutes. The coated hardmetal composition and grade classification provide a clear reference for selecting cutting data, allowing machinists to adopt conservative starting parameters and ramp up to productive feeds and speeds with confidence. Where this insert adds most value in production This insert is especially suitable for cast iron roughing and semi-finishing operations where short, breaking chips and abrasive wear are common. The combination of Tiger·tec Gold coating, A27 chip control and robust geometry delivers reliable cutting edges under interrupted conditions, improving process security and part quality. For manufacturers seeking lower downtime, consistent surface integrity and an economical cutting edge solution, this insert supports higher uptime and a stable production rhythm. For application guidance or to acquire Walter Tools Tiger·tec Gold inserts, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and availability. Technical data Article number: ODMW050408T-A27-WKK25G-WALTER Article designation: ODMW050408T-A27 WKK25G Manufacturer: Walter Tools Product type: Milling indexable insert Execution: W Facts Free angle: 15° Corner radius: 0.8 mm Plate size: 05 Plate thickness: 04 Tolerance class: M Special features Cutting grade: Tiger·tec Gold WKK25G Chipbreaker: A27 Plate form: octagonal Coated carbide (coated hardmetal) Application focus: cast iron machining (K) Series: Tiger·tec Gold FAQ Which materials is this insert intended for? The ODMW050408T-A27 WKK25G insert from Walter Tools is engineered primarily for cast iron (material group K), with the WKK25G grade tuned to resist abrasive wear typical of those workpieces. What is the purpose of the A27 chipbreaker? The A27 chipbreaker on this insert controls chip formation and breaks chips into short, manageable lengths, improving swarf evacuation and reducing the risk of chip-related interruptions. How do the geometry parameters affect performance? The octagonal form and 0.8 mm corner radius spread cutting loads and enable multiple indexings, while the 15° free angle reduces axial stress—together these features enhance edge life and process stability. Is the insert coated and what benefit does that give? Yes, the insert uses the Tiger·tec Gold coating technology; the coating increases wear resistance and thermal stability, extending tool life during abrasive cast iron machining. Can this insert be used in standard milling holders? The ISO-style designation and standard form make the insert compatible with common milling tool bodies accepting this geometry and size. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original factory-new goods of the manufacturer Walter Tools.
ODMW050408T-A27 WKP25S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Silver coating and the WKP25S grade for reliable, productive machining of steel and cast iron; the insert’s octagonal form and A27 chipbreaker support stable chip control and long tool life. Order directly through Metav Werkzeuge or request bespoke application advice from our consultants. ODMW050408T-A27 WKP25S — indexable milling insert, Tiger·tec Silver, 15° free angle (Walter Tools) The ODMW050408T-A27 WKP25S is an indexable milling insert optimised for efficient machining of steel and cast iron, combining a robust coated carbide grade with a chipbreaker geometry suited to general milling tasks. Tiger·tec Silver coating for stable cutting WKP25S grade for steel and cast-iron machining 15° free angle with 0.8 mm corner radius A27 chipbreaker, octagonal insert form Boosted productivity through advanced coated carbide technology The combination of the Tiger·tec Silver coating and the WKP25S grade delivers a balance of wear resistance and toughness that is targeted at machining steel (P) and cast iron (K). The coating reduces adhesive wear and improves edge stability under the thermal and mechanical loads typical of these materials, which helps to extend tool life and reduce unplanned interruptions. By converting coating and grade performance into fewer tool changes, production flow becomes more predictable and cost per part is lowered. Geometry designed for edge strength and consistent surface quality The octagonal insert form with a 15° free angle and 0.8 mm corner radius provides a stable cutting edge that supports both roughing and finishing operations. The A27 chipbreaker is engineered for effective chip control across a range of cutting depths, reducing the risk of recutting and promoting consistent surface finish. The tolerance class M ensures manufacturing precision for reliable seating and repeatability in toolholders, translating into reproducible component quality and fewer setup adjustments. Application flexibility and process reliability on the shop floor This insert is suited to standard milling toolholders and is appropriate where a versatile, general-purpose solution is required for mixed batches of steel and cast iron components. The design emphasises consistent chip formation and a robust cutting edge, helping to maintain stable process windows across series production. For enquiries about compatibility with a specific milling cutter body or to discuss recommended cutting data for a particular alloy, Metav Werkzeuge can provide tailored guidance to match the insert’s properties to the application. For tailored application support and fast availability of Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge for individual advice and ordering assistance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ODMW050408T-A27-WKP25S-WALTER Name: Fräswendeschneidplatte ODMW050408T-A27 WKP25S Product type: Milling insert Manufacturer: Walter Tools Series: Tiger·tec Silver Numbers / Core technical data Free angle: 15° Corner radius: 0.8 mm Insert size: 05 Thickness: 04 Tolerance class: M Designs / Special features Coating: Tiger·tec Silver Grade: WKP25S Chipbreaker: A27 Shape: octagonal Material suitability: Steel (P), Cast iron (K) Execution: W FAQ Which workpiece materials is this insert suitable for? The insert is designed for machining steel (P) and cast iron (K); the WKP25S grade and Tiger·tec Silver coating are optimised for these groups. How does the A27 chipbreaker affect machining results? The A27 chipbreaker improves chip control and reduces the likelihood of recutting, supporting steady surface finish and easier swarf evacuation in both roughing and semi-finish operations. What benefits does the 15° free angle provide? A 15° free angle reduces cutting forces on the flank and helps maintain edge strength, contributing to longer tool life and more consistent component tolerances. Is the insert compatible with common milling cutter bodies? The octagonal form and standard designation make the insert compatible with many indexable milling cutter systems; for confirmation of fit, specify the cutter model when consulting Metav Werkzeuge. Can this insert improve overall process stability? Yes—the combination of Tiger·tec Silver coating and the WKP25S grade is intended to enhance wear resistance and reproducibility, helping to stabilise machining processes in production environments. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are property of their respective owners. Brand names are mentioned for identification and comparison purposes only and reflect genuine factory-new goods from the named manufacturer; there is no affiliation implied between our company and the trademark owners.
ODMW050408T-A27 WKP35G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold grade with an optimised A27 chipbreaker and an octagonal format delivers consistent chip control and extended tool life; order the ODMW050408T-A27 WKP35G directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. ODMW050408T-A27 WKP35G milling indexable insert for steel and cast iron — Walter Tools, Tiger·tec Gold, A27 chipbreaker The ODMW050408T-A27 WKP35G is an octagonal milling indexable insert engineered for high-performance machining of steel and cast iron. Tiger·tec Gold for extended tool life Optimised A27 chipbreaker for stable chips Octagonal format with eight cutting edges 0.8 mm corner radius for improved surface finish Consistent performance for steel and cast iron machining The insert is based on the WKP35G grade within the Tiger·tec Gold family, developed to handle the thermal and mechanical demands of both steel and cast iron (ISO material groups P and K). The coated hardmetal construction provides high wear resistance and improved edge stability, which translates into longer tool life and fewer indexings during production. In practical terms, reduced tool change frequency leads to better machine uptime and more predictable batch processing — a clear advantage in volume production and job-shop environments where cycle time and repeatability are paramount. Controlled chips and reliable geometry for surface quality An A27 chipbreaker has been selected to promote controlled chip formation across a range of feeds and depths of cut, reducing risk of recutting and improving surface integrity. The insert’s octagonal shape offers multiple usable edges, increasing productivity per insert and lowering tooling cost per part. The 0.8 mm corner radius supports fine finishing while maintaining robustness during interrupted cuts, and the 15° free angle helps manage cutting forces for stable engagement. Together, these geometry choices deliver a balance between efficient material removal and consistent surface finish. Process integration, tolerance and production security Manufactured to tolerance class M, the seating precision ensures repeatable clamping and predictable performance in compatible milling cutters. The plate size and thickness conform to the ODMW designation, facilitating straightforward replacement in standard tool bodies that accept this insert format. With a focus on stable edge integrity and broad material coverage, the grade offers dependable behaviour in mixed-production environments and is well suited for users seeking a practical compromise between life and finish. For specific fixture or cutter compatibility, Metav Werkzeuge can advise on matching toolholders and cutting parameters to the machining task. Contact Metav Werkzeuge for tailored application advice and to secure Walter Tools ODMW050408T-A27 WKP35G inserts for dependable machining performance Technical Data SKU: ODMW050408T-A27-WKP35G-WALTER Article designation: ODMW050408T-A27 WKP35G Product type: milling indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WKP35G Measured values Free angle: 15° Corner radius: 0.8 mm Plate size: 05 Plate thickness: 04 Plate form: octagon Tolerance class: M Special features Chipbreaker: A27 Material groups: P / K Main applications: steel, cast iron Execution: W Series/grade description: coated cemented carbide (Tiger·tec Gold) FAQ What materials is this insert suitable for? The ODMW050408T-A27 WKP35G insert is designed for machining steel and cast iron (ISO groups P and K) using the Tiger·tec Gold grade. How does the A27 chipbreaker affect machining? The A27 chipbreaker on this Walter Tools insert promotes controlled chip formation and improved evacuation, helping to avoid recutting and to maintain surface quality. How many cutting edges are available per insert? The octagonal format provides eight usable cutting edges, increasing productivity and reducing tooling cost per edge for the ODMW050408T-A27 WKP35G. What advantage does the Tiger·tec Gold grade offer? The Tiger·tec Gold coating improves wear resistance and edge stability, extending service life and supporting consistent machining results under varying conditions. What does tolerance class M mean for installation? Tolerance class M indicates a standard seating precision that supports repeatable clamping and predictable performance when the insert is mounted in compatible cutter bodies. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no affiliation between our company and the listed brands. The offered item is an original, brand-new product from the manufacturer.
ODMW050408T-A27 WPP35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the octagonal geometry to combine long tool life with consistent chip control for steel machining; order directly via Metav Werkzeuge or contact the sales team for application advice and availability. ODMW050408T-A27 WPP35G indexable milling insert by Walter Tools — Tiger·tec Gold coating, for steel machining The ODMW050408T-A27 WPP35G is an octagonal indexable milling insert engineered for robust and efficient machining of steel components in industrial milling operations. Tiger·tec Gold coated for long tool life Optimised for steel machining (ISO group P) 15° clearance angle for stable cutting Octagonal insert with 0.8 mm corner radius Extended tool life through advanced coating technology The combination of Tiger·tec Gold coating and a coated carbide substrate delivers measurable wear resistance and thermal stability during continuous milling of steel. The coating reduces flank wear and increases resistance to abrasive and adhesive mechanisms that commonly shorten tool life. For production environments where predictable performance matters, this technical design translates into fewer insert changes and more consistent output quality, supporting higher overall equipment effectiveness. Geometry and chip control that promote process reliability Featuring an A27 chipbreaker, an octagonal plate form and a 0.8 mm corner radius, the insert is shaped to provide controlled chip formation and smooth evacuation under typical steel cutting conditions. The 15° clearance angle supports steady cutting forces and reduces rubbing at the cutting edge, which helps maintain surface finish and dimensional stability. The tolerance class M ensures repeatable seating and minimal runout when mounted in compatible toolholders, contributing to process security in serial production. Efficient productivity and predictable machining results Designed for operators and engineers seeking efficiency, the insert’s specification supports stable cutting parameters and reduced downtime for index changes. The grade WPP35G, part of the Tiger·tec Gold series, is tuned for the thermal and mechanical demands of steel machining and offers a balanced combination of wear resistance and toughness. This balance helps avoid premature chipping or crater wear, leading to consistent part quality and a lower total cost of ownership in medium- to high-volume milling tasks. For machining strategies that prioritise throughput and repeatability, this solution offers technical advantages that directly affect cycle time and scrap reduction. For tailored advice on integrating this Walter Tools insert into existing tooling systems or to check stock and delivery options, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge will assist with selection and availability. Technical Data Article number: ODMW050408T-A27-WPP35G-WALTER Designation: ODMW050408T-A27 WPP35G Label: Fräswendeschneidplatte ODMW050408T-A27 WPP35G Manufacturer: Walter Tools Product type: Milling indexable insert Facts Clearance angle: 15° Corner radius: 0.8 mm Thickness code: 04 Size code: 05 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP35G Chipbreaker: A27 Plate form: Octagonal Application: Steel (ISO group P) Execution: W FAQ What materials is this insert suitable for? The insert is designed for steel machining (ISO group P); the WPP35G grade and Tiger·tec Gold technology are optimised for unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit milling performance? The Tiger·tec Gold coating on the Walter Tools milling indexable insert reduces abrasive wear and improves thermal resistance, which extends tool life and stabilises cutting performance under higher temperatures. What is the purpose of the A27 chipbreaker? The A27 chipbreaker promotes controlled chip formation and evacuation when machining steel, contributing to improved surface finish and reduced risk of chip-related interruptions. Does the octagonal shape provide multiple usable edges? The octagonal plate form offers multiple usable edges per insert, helping to lower tooling costs by increasing the number of indexable cutting corners available during production. What does tolerance class M mean for assembly? Tolerance class M indicates a medium tolerance level for seating and dimensional accuracy, supporting reproducible mounting and reliable runout characteristics in standard toolholder systems. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes; there is no affiliation between our company and the mentioned brands. The offered item is original, brand-new goods from Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ODMW060508-A57 WAK15 Wendeplatten - Walter Tools
Take advantage of a highly economical, sharp-edged solution for aluminium and other non‑ferrous metals, combining WAK15 grade performance with precise chip control from the A57 chipbreaker; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. ODMW060508-A57 WAK15 Fräswendeschneidplatte – 15° relief angle, octagonal form | Walter Tools ODMW060508-A57 WAK15 is an indexable milling insert engineered for high-performance machining of aluminium and non‑ferrous metals, offering a specialised geometry for clean chip evacuation and long tool life Sharp geometry for non‑ferrous metals 15° relief angle for smooth cutting Octagonal form for multiple cutting edges Chipbreaker A57 for controlled chips Efficient machining of aluminium and non‑ferrous metals The combination of the WAK15 uncoated carbide grade and a dedicated A57 chipbreaker delivers efficient material removal when working with aluminium and other non‑ferrous metals. The insert’s geometry reduces built‑up edge and material adhesion, which commonly impair surface finish and cycle times. By favouring low cutting resistance and optimised chip flow, this solution supports higher feed rates with consistent results. The octagonal form extends usable edges, improving overall economy in production environments and reducing tool‑change frequency. Geometry that improves surface finish and process stability A 15° relief angle and a 0.8 mm corner radius provide a balance between edge strength and fine surface quality. The modest corner radius helps to prevent premature edge chipping while maintaining a fine finish on soft, ductile materials. The insert’s form and edge treatment ensure that chips are broken and evacuated predictably, reducing interruption from tangled swarf and minimising secondary operations. For workshops seeking repeatable part quality, these geometric choices translate into fewer rejects and more predictable cycle times. Practical benefits for workshop productivity Designed within the Walter N‑grade system, the insert emphasises practical industrial advantages: stable chip formation, broad material coverage for non‑ferrous machining and economical operation. The octagonal Achteck shape increases the number of indexable edges, which lowers tooling costs per part. The uncoated carbide substrate provides a sharp initial cutting edge ideal for softer metals where coatings can promote adhesion. This makes the insert especially useful for high‑volume finishing and semi‑finishing operations on aluminium alloys and similar materials. Application guidance and integration into tooling systems The insert is compatible with standard indexable milling toolholders that accept the ODMW060508-A57 geometry and size code. Its chipbreaker and relief angle are optimised for operations where chip control and surface integrity matter most, such as face milling, shoulder milling and light slotting in non‑ferrous components. For best results, select cutting parameters that favour moderate speeds with appropriate feed to maintain chip thickness and avoid smear. When in doubt about holder compatibility or cutting data, Metav Werkzeuge’s consultants can provide tailored recommendations based on the machine and workpiece material. For ordering advice, toolholder compatibility checks or to request cutting data for the Walter Tools ODMW060508-A57 WAK15 indexable insert, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our team will advise on the optimal setup for the application. Technical Data Article number: ODMW060508-A57-WAK15-WALTER SKU: ODMW060508-A57-WAK15-WALTER Label: Fräswendeschneidplatte ODMW060508-A57 WAK15 Walter Tools Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 0.8 mm Plate form: Achteck (octagonal) Plate size: 06 Plate thickness: 05 Special features Grade: WAK15 (uncoated carbide) Chipbreaker: A57 Series: Walter N‑grade system Application: Aluminium and non‑ferrous metals FAQ What materials is this insert suitable for? The ODMW060508-A57 WAK15 insert is designed for aluminium and other non‑ferrous metals; the WAK15 grade and A57 chipbreaker optimise performance for these material groups. Is the insert coated? No; the WAK15 designation indicates an uncoated carbide grade, chosen to provide a very sharp cutting edge and to reduce material adhesion during non‑ferrous machining. How many cutting edges are available per insert? The octagonal form provides multiple usable edges; exact indexing count depends on the holder and orientation but the shape maximises edge economy. What is the effect of the 0.8 mm corner radius? A 0.8 mm corner radius balances edge strength with surface finish, reducing the risk of chipping while maintaining a fine machined face on softer materials. Can this insert be used for roughing and finishing? The insert is best suited to finishing and light semi‑finishing operations in non‑ferrous materials, where chip control and surface quality are priorities. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ODMW060508-A57 WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating for abrasive cast-iron work, the robust WKK25G carbide grade and the octagonal form that provides multiple cutting edges for economical tool use; order the insert directly via Metav Werkzeuge or request advice from the Metav Werkzeuge consultants for process optimisation. ODMW060508-A57 WKK25G milling insert for cast iron — Walter Tools, Tiger·tec Gold, 15° free angle A ODMW060508-A57 WKK25G milling insert designed for productive machining of cast iron, combining a Tiger·tec Gold coating and a chipbreaker adapted to interrupted and abrasive chip formation. Tiger·tec Gold coating for wear resistance Optimised for cast iron machining Octagonal shape for multiple cutting edges 15° free angle for stable engagement Chipbreaker A57 tailored for cast iron Durable coating for abrasive cast-iron applications The Tiger·tec Gold coating and WKK25G grade deliver a reliable balance between wear resistance and toughness, specifically adapted to the short, brittle chips typical of cast iron. The coating reduces abrasive wear, which translates into longer tool life and fewer indexings per workpiece. For production runs where consistent dimensional results and fewer tool changes matter, this combination provides an efficient solution. The technical design helps to maintain a stable cutting edge under cyclic loads, improving reproducibility in CNC milling operations. Geometry engineered for process security and edge life An octagonal plate form gives up to eight usable cutting edges, increasing cost-efficiency per insert. The 0.8 mm corner radius and the 15° free angle support a stable cutting geometry that lowers vibration and improves surface finish in cast-iron components. The integrated chipbreaker A57 controls chip shape to prevent clogging and to assist coolant flow, which is particularly useful in interrupted cuts and roughing operations. These features together reduce rework rates and contribute to predictable cycle times on series parts. Practical benefits for shop-floor productivity Using this insert reduces non-productive time through fewer tool changes and consistent surface quality, which optimises downstream processes. The combination of grade, coating and chip control means machines can run at productive parameters with lower risk of premature edge failure. For process planners, the insert supports higher uptime and predictable maintenance intervals; for operators, it offers straightforward handling during indexing. The result is a measurable improvement in throughput without sacrificing component integrity. For tailored advice on integrating the Walter Tools Tiger·tec Gold insert into an existing process, contact Metav Werkzeuge by e‑mail or phone to discuss application parameters and stock availability. Technical Data Article number: ODMW060508-A57-WKK25G-WALTER SKU: ODMW060508-A57-WKK25G-WALTER Product type: Milling insert (indexable) Series: Tiger·tec Gold Grade: WKK25G Manufacturer: Walter Tools Facts Plate size: 06 Plate thickness: 05 Corner radius: 0.8 Free angle: 15° Tolerance class: M Special features Coating: Tiger·tec Gold Chipbreaker: A57 Plate form: Octagon Application: Cast iron (K) Material designation: carbide grade WKK25G Suitable for abrasive, short-breaking chips FAQ What materials is this insert suitable for? The insert is designed and specified for cast iron machining; the WKK25G grade and Tiger·tec Gold coating are optimised for abrasive cast-iron cutting behaviour. How many cutting edges are available per insert? Thanks to the octagonal plate form, the insert offers multiple indexable cutting edges, which improves cost-effectiveness in serial production. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WKK25G grade increases resistance to abrasive wear and maintains a stable cutting edge during interrupted cuts and cyclic loads. Is the chip control suitable for interrupted milling? Yes, the chipbreaker A57 is tailored to control short, brittle chips commonly found in cast iron, improving chip evacuation and process reliability. Which tolerance and geometry information should be considered for CAM programming? Refer to the tolerance class M, the plate thickness 05 and the corner radius 0.8 when programming tool offsets and establishing finishing allowances. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and designations are used for explanation only and do not indicate any affiliation with or endorsement by the respective rights holders. The offered item is original factory-new merchandise from the manufacturer.
ODMW060508-A57 WKP25S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the A57 chipbreaker to achieve stable chip control and extended tool life across steel and cast iron applications; order directly via Metav Werkzeuge or consult our technical team for process alignment. ODMW060508-A57 WKP25S milling insert — Tiger·tec Silver, A57 chipbreaker | Walter Tools The ODMW060508-A57 WKP25S is a high-performance milling insert designed for versatile finishing and medium cutting in steel and cast iron applications Tiger·tec Silver coated carbide grade WKP25S Suitable for steel (P) and cast iron (K) A57 chipbreaker for stable chip control Octagonal form with 15° relief angle Consistent performance across steel and cast iron The ODMW060508-A57 WKP25S is specified for machining according to ISO 513 groups P (steel) and K (cast iron). The insert’s WKP25S coated carbide grade, realised in the Tiger·tec Silver series, is optimised for the heat and wear patterns typical of these workpiece families. This combination reduces flank and crater wear under stable cutting conditions, which translates into predictable tool life and fewer unscheduled tool changes in production. Use of an industry-grade coating is a rational measure to increase process robustness while maintaining surface quality. Predictable chip control and edge stability for secure cycles The integrated A57 chipbreaker is designed to break and guide chips reliably under varying cutting depths and feeds; this improves evacuation in through‑cutting and shoulder operations. The insert’s 15° relief angle lowers rubbing on the flank, while the 0.8 mm corner radius balances edge strength with attainable surface finish. The octagonal form offers multiple indexable edges, which increases cost efficiency by extending usable cutting life per insert and reduces downtime for tool changes. These geometry choices support stable, repeatable machining results in mixed‑batch and series production. Lower tooling costs through indexability and coating technology Adopting an indexable insert with the Tiger·tec Silver coating and the WKP25S grade gives a clear economy advantage: improved wear resistance reduces the frequency of insert replacement, and the octagonal geometry increases available cutting edges. The coating lowers friction and heat at the cutting zone, which can help maintain a consistent surface finish and reduce the risk of built-up edge when machining abrasive cast iron or tougher steel grades. Combined with Walter Tools’ system compatibility, this insert supports efficient inventory strategies and higher machine uptime. For robust milling performance with Walter Tools’ Tiger·tec Silver inserts, contact Metav Werkzeuge for technical advice or to place an order: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: ODMW060508-A57-WKP25S-WALTER Product: Fräswendeschneidplatte (milling insert) — ODMW060508-A57 WKP25S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP25S Chipbreaker: A57 Numbers / Core technical data Relief angle: 15° Corner radius: 0.8 mm Plate size: 06 Plate thickness: 05 Tolerance class: M Special features / Versions Coating: Tiger·tec Silver Carbide grade: coated carbide (WKP25S) Form: octagonal Material suitability: steel (P) and cast iron (K) according to ISO 513 Application focus: milling / indexable insert FAQ What workpiece materials is this insert suited for? The ODMW060508-A57 WKP25S milling insert by Walter Tools is specified for ISO 513 groups P (steel) and K (cast iron), making it suitable for a wide range of steel grades and cast iron parts. How does the A57 chipbreaker influence machining? The A57 chipbreaker on the Walter Tools insert promotes short, controllable chips and reliable evacuation, which stabilises the cutting process and reduces the risk of built-up edge and surface defects. How many indexable edges are available on this octagonal insert? The octagonal form provides multiple usable edges; the exact count of indexed positions depends on the toolholder and insert orientation but the geometry is chosen to maximise economical edge usage. What benefits does the Tiger·tec Silver coating deliver? The Tiger·tec Silver coating on the WKP25S grade improves wear resistance and reduces friction at the cutting zone, contributing to longer tool life and consistent surface finish when machining steel and cast iron. Is the insert suitable for finishing or roughing operations? The design and 0.8 mm corner radius position the insert for finishing and medium cutting operations; final suitability depends on process parameters and machine rigidity. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
ODMW060508-A57 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating, the WKP35G grade and a precisely defined A57 chipbreaker for stable chip control and extended tool life; the result is productive, predictable milling of steel and cast iron. Order the milling insert via Metav Werkzeuge or contact the consultants for application advice. ODMW060508-A57 WKP35G milling insert with Tiger·tec Gold, Walter Tools — for steel and cast iron ODMW060508-A57 WKP35G is a precision milling insert designed for reliable machining of steel and cast iron, combining Tiger·tec Gold coating technology with a chipbreaker optimised for stable chip formation Tiger·tec Gold coated grade WKP35G Octagonal insert form Achteck A57 chipbreaker for controlled chips 15° relief angle for robust engagement Productivity gains through optimised grade and coating The combination of the Tiger·tec Gold coating and the WKP35G hardmetal grade delivers increased process stability in interrupted and continuous milling. The coating reduces abrasive wear and improves heat resistance, which translates into longer edge life and fewer tool changes; this increases machining uptime and reduces overall production cost. The A57 chipbreaker fosters short, predictable chips when cutting both steel and cast iron, reducing the risk of chip entanglement and improving cycle reliability. Consistent surface quality and repeatable results A controlled cutting geometry produces reproducible part surfaces. The 0.8 mm corner radius and the 15° relief angle combine to give a robust cutting edge that resists chipping under moderate engagement. For shops requiring repeatability, the insert’s octagonal form provides multiple usable edges, making index changes straightforward and maintaining a consistent finish across batches. Material compatibility with P (steel) and K (cast iron) groups according to ISO guidelines helps select the right parameters for predictable outcomes. Geometry and chip control that support faster cycles The insert size and thickness coded in the designation are matched to common milling toolholders and offer stable clamping and heat dissipation. The A57 chipbreaker is engineered to produce manageable chips at typical cutting parameters for steel and cast iron, which assists coolant flow and tool life. This geometry enables higher effective cutting data in many applications, increasing removal rates without sacrificing surface integrity or dimensional control. Practical integration in production environments The insert’s standard designation ensures compatibility with established toolholder systems and spindle setups. Shops benefit from fewer variant types in stock thanks to the broad application range of the grade, which covers unalloyed and alloyed steels as well as cast irons. Documentation of the insert’s series and specifications eases process planning and helps maintenance teams schedule replacements before quality is affected. For application guidance or cutting-data recommendations, Metav Werkzeuge provides consultation tailored to machining strategies. Contact Metav Werkzeuge today to specify Walter Tools Tiger·tec Gold inserts for optimised milling of steel and cast iron — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: ODMW060508-A57-WKP35G-WALTER Designation: ODMW060508-A57 WKP35G Series: Tiger·tec Gold Grade: WKP35G Facts Relief angle: 15° Corner radius: 0.8 mm Plate size code: 06 Plate thickness code: 05 Tolerance class: M Special features Octagonal plate form (Achteck) Chipbreaker: A57 Material compatibility: P (steel), K (cast iron) Execution: W Brand: Walter Tools FAQ What materials are suitable for this insert? The ODMW060508-A57 WKP35G insert is designed for steel (P) and cast iron (K) machining, using the Tiger·tec Gold grade for improved wear resistance and chip control. How does the A57 chipbreaker benefit milling operations? The A57 chipbreaker on the Walter Tools insert produces short, controlled chips that reduce entanglement and support stable cutting conditions, improving cycle reliability and surface quality. Is this insert compatible with common milling holders? The designation ODMW060508-A57 WKP35G follows standard insert coding and is compatible with matching milling toolholders designed for that geometry and size. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original, factory-new merchandise of the stated manufacturer.
ODMW060508-A57 WPP35G Wendeplatten - Walter Tools
The combination of a wear-resistant Tiger‑tec Gold coating and the WPP35G grade delivers consistent performance when machining steel; the octagonal form with an A57 chipbreaker ensures reliable chip control and repeatable results. Order directly via Metav Werkzeuge or consult our specialists for application advice. ODMW060508-A57 WPP35G milling indexable insert for steel — Walter Tools, Tiger‑tec Gold, 15° clearance The ODMW060508-A57 WPP35G is a Tiger‑tec Gold milling indexable insert engineered for productive steel machining in demanding industrial environments Tiger‑tec Gold coated grade WPP35G Optimised A57 chipbreaker for steel machining 15° clearance angle for stable cutting Octagonal form with 0.8 mm corner radius High-performance grade for steel machining The coated carbide grade WPP35G from the Tiger‑tec Gold family is formulated for machining steel and delivers a balance of wear resistance and toughness. As a coated hardmetal grade, it reduces flank wear under typical steel cutting temperatures and supports longer tool life. The classification P denotes suitability for steel according to ISO standards, which translates into stable heat management and predictable chip formation during medium to heavy cuts. The result is fewer tool changes and more consistent part quality on production runs. Reliable chip control and surface consistency Equipped with an A57 chipbreaker, this insert provides controlled chip separation that reduces re-cutting and improves surface finish. The 15° clearance angle optimises the cutting geometry for robust engagement with the workpiece, while the 0.8 mm corner radius helps maintain edge strength at interrupted cuts. These features combine to lower the risk of built-up edge and minimise vibration in many milling applications, producing tighter tolerances and smoother surfaces with fewer secondary operations. Design and handling benefits for production workshops The octagonal insert form offers multiple indexed cutting edges, enhancing utilisation and reducing tooling costs per edge change. The designation ensures compatibility with standard toolholders that accept the ODMW form factor, while the W execution and tolerance class M indicate consistent fit and repeatability in clamping systems. As an indexable insert, it enables quick replacement without regrinding, supporting short changeover times and uninterrupted machining cycles—advantages that matter in high-mix, high-volume environments. For process-secure machining with Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge for delivery options and tailored application recommendations via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: ODMW060508-A57-WPP35G-WALTER Article designation: ODMW060508-A57 WPP35G Grade: WPP35G Series: Tiger‑tec Gold Manufacturer: Walter Tools Facts Clearance angle: 15° Corner radius: 0.8 mm Plate form: Octagonal Plate size designation: 06 Thickness designation: 05 Special features Coating technology: Tiger‑tec Gold Chipbreaker: A57 Material application: Steel (P) Execution: W Tolerance class: M FAQ What materials is this insert intended for? The ODMW060508-A57 WPP35G milling indexable insert is specified for steel applications (ISO group P) and the WPP35G grade is optimised for the temperatures and chip behaviour typical of steel machining. How does the A57 chipbreaker affect productivity? The A57 chipbreaker improves chip control and reduces re-cutting, so the insert helps achieve smoother surfaces and fewer interruptions, which enhances overall productivity with the WPP35G grade. Can the insert be indexed multiple times? Yes, the octagonal form provides several usable cutting edges; indexing the insert restores a fresh cutting edge without regrinding, reducing downtime in production. Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; sales@walter-tools.com Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only. There is no affiliation between our company and the manufacturers named. The offered item is an original, factory‑new product from the manufacturer.
ODMW060508T-A27 WKK25G Wendeplatten - Walter Tools
Robust performance for abrasive cast iron: the combination of the WKK25G grade and Tiger‑tec Gold coating delivers predictable edge life and reduced tool changes. The octagonal form and A27 chipbreaker improve chip control, raising productivity in series milling operations. Order the inserts directly via Metav Werkzeuge or consult their specialists for process optimisation. ODMW060508T‑A27 WKK25G indexable milling insert — Tiger‑tec Gold grade, octagonal, 15° by Walter Tools The ODMW060508T‑A27 WKK25G is an indexable milling insert engineered for productive and reliable cast iron machining in industrial milling applications Tiger‑tec Gold coating technology Optimised for cast iron machining 15° free angle for stable cutting Octagonal shape for economical indexing Predictable edge life for abrasive cast iron components The combination of the WKK25G cutting grade and Tiger‑tec Gold coating has been developed specifically for cast iron, where abrasive wear and short, breaking chips are the norm. The grade balances wear resistance and toughness, which translates to more consistent cutting performance and fewer unscheduled tool changes. For production environments, this reliability reduces downtime and improves process repeatability, supporting higher overall equipment effectiveness. Geometry that improves chip control and process stability The insert’s octagonal plate form and the dedicated A27 chipbreaker manage the typically discontinuous chips of cast iron, promoting controlled fragmentation and safe evacuation. The 15° free angle combined with a 0.8 mm corner radius helps maintain a stable cutting edge under varying loads, lowering vibration and improving surface integrity. These geometry features result in smoother spindle loads and support higher, more consistent metal removal rates. Designed for cost‑efficient milling and reproducible results Tolerance class M and the ISO designation ensure compatibility with standard holders and predictable fit in milling cutters. The insert’s multiple usable edges from its shape increase the number of indexings possible before replacement, providing a clear cost benefit per edge. Using a coated grade optimised for abrasive materials reduces flank wear and maintains dimensional control, which is especially important for repeat production runs and mixed‑batch operations. Practical integration and operational advantages As a coated indexable insert from Walter Tools, the product is suitable for integration into established toolsets where robust performance and consistent life are priorities. The insert’s execution and series (Tiger‑tec Gold) simplify grade selection for cast iron tasks, making it straightforward to standardise tooling across machines. Fewer adjustments and predictable replacement intervals help planners and operators streamline inventory and maintenance schedules while preserving component quality. For machining abrasive cast iron with dependable edge life, contact Metav Werkzeuge for tailored recommendations and supply of Walter Tools Tiger‑tec Gold inserts at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: ODMW060508T-A27-WKK25G-WALTER Label: Fräswendeschneidplatte ODMW060508T-A27 WKK25G Walter Tools ISO designation: ODMW060508T-A27 WKK25G Manufacturer: Walter Tools Facts Free angle: 15° Corner radius: 0.8 mm Size designation: 06 Thickness code: 05 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WKK25G Chipbreaker: A27 Plate form: octagonal Execution: W Material/application group: suitable for cast iron FAQ Which materials is this insert intended for? The insert is optimised for cast iron machining; the WKK25G grade and Tiger‑tec Gold coating are tuned to resist abrasive wear and to handle the short, breaking chips typical of cast materials. What benefits does the WKK25G grade provide compared with general grades? WKK25G, as used in the Tiger‑tec Gold series, offers a balance of wear resistance and toughness that yields consistent edge life and fewer tool changes during high‑volume cast iron milling. How does the A27 chipbreaker affect chip formation? The A27 chipbreaker promotes controlled chip segmentation in cast iron, improving evacuation and reducing the risk of recutting; this supports process stability and surface quality. Is the octagonal form suitable for economical use in production? The octagonal plate form increases the number of indexable positions and allows economical rotation of the cutting edge, which helps lower the cost per cutting edge in serial production. Can this insert be used for both roughing and finishing operations? The grade’s balance of toughness and wear resistance makes it suitable for many cast iron operations ranging from medium cutting to finishing passes, depending on cutting data and machine rigidity. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners and are mentioned for explanation only. There is no affiliation between our company and the trademark owners. The described article is an original, factory‑new product of the manufacturer.
ODMW060508T-A27 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, octagonal geometry with a 0.8 mm corner radius and a 15° clearance angle for reliable, high-productivity milling of steel and cast iron; order the insert directly via Metav Werkzeuge or ask the consultants for application support. ODMW060508T-A27 WKP25S Milling Insert — Tiger·tec Silver for Steel & Cast Iron (Walter Tools) The ODMW060508T-A27 WKP25S is a coated carbide milling insert designed for productive roughing and finishing of steel and cast iron, offering a balanced geometry and a chipbreaker tailored to stable chip formation. Tiger·tec Silver coating for extended tool life Optimised for steel (P) and cast iron (K) Octagonal form with 0.8 mm corner radius Chipbreaker A27 for controlled chip formation Consistent chip control for sustained productivity The combination of the Tiger·tec Silver coating and the dedicated chipbreaker A27 delivers predictable chip formation under typical steel and cast-iron cutting conditions. Coated carbide minimises abrasive wear and supports higher cutting parameters compared with uncoated grades, which translates into improved productivity and longer service intervals. This leads to fewer indexings and a smoother production flow when machining steels and grey or ductile cast irons, as defined by ISO groups P and K. If machining stability or process windows need to be confirmed for a specific application, Metav Werkzeuge can provide cutting parameter guidance and material-specific recommendations. Geometry engineered for robust edge life and surface quality The insert’s octagonal form combines multiple usable cutting edges with a compact layout, while the 0.8 mm corner radius reduces edge chipping when entering interrupted cuts or working with harder cast-iron grades. The 15° clearance angle supports secure engagement in milling pockets and enhances tool life by lowering friction at the cutting edge. Together, these characteristics contribute to consistent part quality and an improved surface finish, particularly in serial production where reproducibility is essential. The coated hardmetal grade WKP25S is selected to balance wear resistance and toughness for mixed production runs. Application advice and material compatibility Designed for conventional and high-productivity milling tasks, the insert performs well in shoulder and face milling operations on steel and cast iron. The grade selection and coating suit a range of applications from roughing to semi-finishing, depending on the chosen cutting data. The insert’s dimensions and form match standard toolholders specified for the ODMW format, enabling straightforward integration into existing tool assemblies. For specific feeds, speeds and depth-of-cut recommendations that match machine capability and workpiece material, contact Metav Werkzeuge for practical machining data and optimisation tips. Contact Metav Werkzeuge for application advice and availability of Walter Tools Tiger·tec Silver WKP25S inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: ODMW060508T-A27-WKP25S-WALTER Designation: ODMW060508T-A27 WKP25S Brand: Walter Tools Series: Tiger·tec Silver Grade: WKP25S Format: ODMW060508T-A27 Facts Clearance angle: 15° Corner radius: 0.8 mm Plate form: Octagon Plate size: 06 Plate thickness: 05 Chipbreaker: A27 Tolerance class: M Execution: W Special features Coated carbide cutting material Suitable for steel (ISO P) Suitable for cast iron (ISO K) Stable chip control for mixed production Multiple indexable cutting edges FAQ What materials is this insert suited to machine? The insert is intended for steel and cast iron machining as designated by the ISO groups P and K; the Tiger·tec Silver-coated WKP25S grade is tuned for those materials. What is the corner radius and why does it matter? The corner radius is 0.8 mm; this radius improves edge robustness and reduces chipping in interrupted cuts while contributing to a reliable surface finish. Which chipbreaker does the insert use and what is its benefit? This geometry uses the A27 chipbreaker, which promotes controlled chip formation and evacuation, helping to maintain stable cutting forces and consistent productivity. Is the Tiger·tec Silver coating beneficial for higher cutting speeds? Yes, the Tiger·tec Silver coating enhances wear resistance and thermal stability, supporting more aggressive cutting parameters compared with uncoated variants in many steel and cast-iron applications. How many usable edges does the octagonal form provide? The octagonal plate form offers multiple indexable edges, enabling cost-effective edge changes and extended utilisation of the insert’s cutting potential. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ODMW060508T-A27 WKP35G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold wear resistance, the WKP35G grade and a 15° clearance angle ensures consistent productivity and reliable chip control in demanding milling operations; benefit from extended tool life and stable cutting results. Order the ODMW060508T‑A27 WKP35G milling insert directly via Metav Werkzeuge or request application advice from the consultants if required. ODMW060508T‑A27 WKP35G Milling insert (steel & cast iron) – Walter Tools The ODMW060508T‑A27 WKP35G is an octagonal milling insert engineered for productive machining of steel and cast iron in general milling applications. Tiger‑tec Gold coating for extended tool life Grade WKP35G for steel and cast iron 15° clearance angle for stable cutting Octagonal 06 shape with 0.8 mm corner radius Maximised productivity through coating and grade The combination of the Tiger‑tec Gold coating and the WKP35G grade provides a high‑performance solution for interrupted and continuous milling. The multi‑layer coating system reduces adhesive and abrasive wear, which extends tool life and keeps cutting edges sharper for longer. As a result, cycle times are reduced and tool change frequency is lower, translating directly into improved machine utilisation and lower process costs. The coated carbide substrate is balanced to withstand the thermal and mechanical loads typical when machining P (steel) and K (cast iron) workpieces. Reliable material compatibility and process stability Designed for P and K groups according to ISO 513, this insert is tailored to the specific chip formation and wear mechanisms of steel and cast iron. The specified geometry supports controlled chip breakage and evacuation, limiting the risk of rework due to poor surface finish or edge failure. By using an insert with proven material compatibility, shops gain predictable tool life and repeatable part quality, which simplifies planning for production runs and reduces scrap rates. Geometry that supports cutting performance and edge security The octagonal form (06) and the 0.8 mm corner radius deliver a compromise between edge strength and cutting finesse. The 15° clearance angle provides secure engagement and reduces rubbing on the flank face, improving dimensional accuracy and surface integrity. The built‑in chipbreaker A27 is optimised to assist fracture and control of chips in typical milling tasks, helping to avoid long, entangling swarf and to maintain a stable cutting process under varying cutting conditions. Practical handling, mounting and application benefits The insert’s standard designation and tolerance class M make it straightforward to integrate into established milling systems and toolholders, simplifying inventory and changeover. The octagonal shape allows multiple indexings per insert, increasing the number of usable cutting edges and lowering per‑edge cost. For workshops aiming to increase uptime and reduce tooling overhead, this indexable insert presents a practical balance of performance and economy while remaining compatible with common milling setups. Request application advice from Metav Werkzeuge for the Walter Tools ODMW060508T‑A27 WKP35G insert to optimise cutting data and tool life, and to check current availability in the required grade and geometry Technical data SKU: ODMW060508T-A27-WKP35G-WALTER Article: ODMW060508T-A27 WKP35G Manufacturer: Walter Tools Core specifications Clearance angle: 15° Corner radius: 0.8 mm Plate size: 06 Plate thickness: 05 Tolerance class: M Features Grade: WKP35G Series: Tiger‑tec Gold Substrate/coating: coated carbide Suitable for: steel (P) and cast iron (K) Chipbreaker: A27 Shape: octagonal FAQ Which materials are suitable for this insert? The insert is specified for machining steel (P) and cast iron (K); the WKP35G grade and Tiger‑tec Gold coating are optimised for these material groups. What are the key geometry parameters to consider? Important values are the 15° clearance angle and the 0.8 mm corner radius; these influence edge strength, cutting forces and surface finish for typical milling tasks. How many cutting edges are available per insert? The octagonal shape (06) provides multiple indexable edges, permitting several re‑uses of the insert before replacement, which improves cost efficiency. Is the chip control suitable for interrupted cuts? Yes, the A27 chipbreaker combined with the coated grade supports stable chip formation and evacuation in both continuous and interrupted milling conditions. Can this insert be used with standard Walter toolholders? The designation and tolerance class M are compatible with common milling systems; confirmation with the chosen toolholder is recommended for correct seating and clamping. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is an original, brand‑new product of the manufacturer.
ODMW060508T-A27 WPP35G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold cutting grade and the octagonal geometry for reliable steel machining, combining high process stability and consistent edge life with precise chip control. Order the insert directly via Metav Werkzeuge or ask the consultants for application-specific cutting data. ODMW060508T-A27 WPP35G indexable milling insert by Walter Tools — Tiger‑tec Gold, for steel machining, octagonal form The ODMW060508T-A27 WPP35G is an octagonal indexable milling insert designed for efficient machining of steel under the Tiger‑tec Gold coating technology, offering optimised chip control and a strong cutting edge for demanding production environments. Tiger‑tec Gold coating for durable cutting edge Optimised chip control with A27 chipbreaker 15° relief angle for secure engagement 0.8 mm corner radius for higher edge strength Consistent performance with a premium coating The coated grade WPP35G is engineered for the thermal and mechanical demands of steel machining; its Tiger‑tec Gold technology combines a wear-resistant substrate with a controlled coating system to deliver longer edge life and reduced flank wear. By favouring stable chip formation and predictable wear behaviour, the insert helps to increase machining uptime and reduces the need for frequent tool changes. This results in tangible efficiency gains on batch runs and makes process planning more reliable, a clear advantage for production-focused environments. Robust geometry that stabilises cutting and surface quality The octagonal shape and the 0.8 mm corner radius provide a balance between edge strength and form accuracy. The insert’s 15° relief (free) angle ensures secure engagement and low cutting forces in shoulder and slotting operations, while the A27 chipbreaker actively manages chip flow for common steel grades. For engineers and buyers, these features translate into fewer burrs, improved surface finishes and more predictable tool life — important when replacing finished parts or meeting tight tolerances. Practical application and selection guidance This indexable insert is intended primarily for unalloyed and alloyed steel (ISO group P). As a Walter Tools grade, it is suitable where reliable performance with a focus on durability and process security is required. When specifying tooling systems, match the insert to compatible toolholders that accept the ODMW06 size and A27 chipbreaker geometry; the insert’s labelled designation simplifies cross-referencing. For newcomers: the chipbreaker type affects how the material breaks away from the workpiece, the corner radius influences part fillets and strength, and the coating determines wear resistance — selecting the correct combination reduces rework and improves overall shop throughput. For targeted recommendations on Walter Tools Tiger‑tec Gold inserts and help matching toolholders or cutting data, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — the Metav team will advise on the best option for steel machining applications. Technical Data SKU: ODMW060508T-A27-WPP35G-WALTER Article description: ODMW060508T-A27 WPP35G Product type: Indexable milling insert Brand: Walter Tools Series: Tiger‑tec Gold Facts Free angle: 15° Corner radius: 0.8 mm Plate size: 06 Plate thickness: 05 Tolerance class: M Special features Chipbreaker: A27 Shape: octagonal Grade: WPP35G Material application: Steel (P) Execution: W FAQ What materials is this insert optimised for? The WPP35G grade is optimised for steel (ISO group P); the Tiger‑tec Gold coating and chipbreaker suit unalloyed and alloyed steels typically encountered in general machining. How does the A27 chipbreaker improve performance? The A27 chipbreaker controls chip form and evacuation during steel machining, reducing the risk of built-up edge and improving surface finish when using this Walter Tools indexable insert. When should a 0.8 mm corner radius be chosen? A 0.8 mm corner radius offers a compromise between edge strength and part geometry; it is recommended for operations where enhanced edge stability is required without significantly altering the intended fillet size. Is the 15° relief angle suitable for shoulder milling? Yes, the 15° relief (free) angle provides secure engagement and manageable cutting forces for typical shoulder and slotting operations in steel using this insert. Trademarks and trade names mentioned are the property of their respective owners. Brand names and protected designations are cited solely for explanation and reference; there is no affiliation implied between Metav Werkzeuge and the named manufacturers. The offered article is original and supplied as factory‑new goods. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ONHF050408-F67 WAK15 Wendeplatten - Walter Tools
Take advantage of a dedicated WAK15 uncoated carbide grade combined with a precise 0.8 mm corner radius and the F67 chipbreaker to improve chip control and surface quality in aluminium machining; order via Metav Werkzeuge or contact our consultants for machine-specific recommendations. ONHF050408-F67 WAK15 milling indexable insert by Walter Tools — octagonal, 0.8 mm corner radius ONHF050408-F67 WAK15 is a milling indexable insert engineered for high-efficiency machining of aluminium and other non-ferrous materials, providing reliable chip control and multiple cutting edges for uninterrupted production. *WAK15 uncoated carbide for aluminium machining *Octagonal shape ensures four cutting positions *0.8 mm corner radius for fine detail finishing *F67 chipbreaker for improved chip control Consistent chip control for aluminium and non‑ferrous materials The WAK15 grade is an uncoated carbide specifically intended for the reliable machining of aluminium and other non-ferrous metals according to ISO 513. Combined with the F67 chipbreaker, the insert reduces tendency to material adhesion and supports clean chip formation even at higher feeds. This leads to a more consistent surface finish and minimises downtime for manual cleaning or secondary operations, making the insert a pragmatic choice where productivity and process stability are priorities. Geometry that increases tool life and reduces tooling costs An octagonal insert shape provides multiple usable cutting edges, enabling rapid indexation and extended service life per insert. The 0.8 mm corner radius offers a balance between strength at the cutting edge and the ability to achieve fine finishing results, while the 0° negative rake contributes to secure seating and predictable cutting behaviour in interrupted or continuous cuts. Together, these design aspects help reduce tooling consumption and improve cost efficiency within standard shop-floor workflows. Practical shop-floor benefits and application guidance Belonging to the Walter N‑Sortensystem, this insert benefits from a clear sort allocation and compatibility with established holders. The coded size and thickness designation supports simple inventory management and interchangeability. For tailored cycle times and feed recommendations, machine-specific conditions should be considered; specialist advice is available to match cutting parameters to the spindle power and workpiece setup. The combination of grade and chip geometry is especially suited to series production of aluminium components where repeatability and low burr formation are required. Quality standards and process reliability Manufactured to a tolerance class H and supplied in the design variant ONHF050408-F67, the insert offers the precision demanded in industrial environments. Its uncoated nature reduces thermal build-up on soft metals and avoids coating-related adhesion issues, while the F67 chipbreaker helps maintain stable cutting forces. For operations seeking steady, repeatable results from a recognised tooling system, the insert represents a robust technical solution with defined material applicability and clear handling advantages. Contact Metav Werkzeuge today for application-specific advice and availability of the Walter Tools ONHF050408-F67 WAK15 insert — our technical team will support selection and machining parameter optimisation Technical data Article number: ONHF050408-F67-WAK15-WALTER Designation: ONHF050408-F67 ISO designation: ONHF050408-F67 WAK15 Facts Shape: Achteck (octagonal) Corner radius: 0.8 mm Plate size designation: 05 Plate thickness designation: 04 Free angle: 0° (negative) Tolerance class: H Special features Series: Walter N-Sortensystem Grade: WAK15 (uncoated carbide) Chipbreaker: F67 Application: Aluminium and non-ferrous metals (ISO 513) Execution: F FAQ What materials is this insert suitable for? The ONHF050408-F67 WAK15 insert is designed primarily for aluminium and other non-ferrous materials as specified by its WAK15 grade and ISO 513 applicability. How many cutting edges are available per insert? Due to the octagonal form, the insert allows multiple indexings; the exact number of usable edges depends on machining conditions and edge wear for the ONHF050408-F67 WAK15. Does the insert have a coating? The WAK15 grade in this insert is an uncoated carbide variant, chosen to reduce material adhesion when machining soft, sticky metals. What is the purpose of the F67 chipbreaker? The F67 chipbreaker on the ONHF050408-F67 WAK15 helps shape chips for safe evacuation and reduces built-up edge, supporting consistent surface quality in series production. Is this insert compatible with standard Walter tool holders? Yes, the insert is part of the Walter N‑Sortensystem and is intended for use with holders designed for the ONHF050408-F67 form and size. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (market appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are used for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is original, factory-new goods from the manufacturer.
ONHF050408-F67 WHH15X F Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide grade WHH15X, chipbreaker F67 and an octagonal form with 0° negative rake for reliable, repeatable milling operations. Order the insert directly via Metav Werkzeuge or ask the consultants for cutting data and application advice. ONHF050408-F67 WHH15X — milling indexable insert by Walter Tools, chipbreaker F67 The ONHF050408-F67 WHH15X is an octagonal milling indexable insert designed for stable chip control and robust performance in a wide range of milling tasks. Octagonal insert for multiple cutting edges Coated carbide grade WHH15X Chipbreaker F67 for controlled chips 0° negative rake for stable cutting Consistent edge life for predictable production The octagonal shape and the coated carbide grade WHH15X deliver a balanced combination of wear resistance and multiple indexable edges, which reduces downtime for tool changes. An octagonal form provides more usable cutting corners per insert compared with standard geometries, helping to maintain cycle times and minimise operational interruptions. The tolerance class H supports repeatable seating and secure clamping in standard toolholders, contributing to process stability on production lines. Controlled chips and improved surface quality The integrated chipbreaker F67 is engineered to influence chip formation, producing smaller, manageable chips that ease evacuation from the cut and reduce the risk of re-cutting. Better chip control directly helps to maintain surface finish and decreases post-machining cleaning. Where finishing or semi-finishing is required, the combination of chip geometry and the insert’s profile enhances surface consistency and reduces the likelihood of secondary operations. Robust geometry for demanding conditions A 0° negative rake (negative cutting angle) increases the effective strength of the cutting edge, making the insert suited to interrupted cuts, varied engagement conditions and tougher milling scenarios. Negative rake geometry typically provides greater tool life under shock loading and when machining less predictable workpiece surfaces. This makes the insert a practical choice for mixed-production environments where reliability is paramount. Practical handling and selection advice This indexable insert is provided in the Walter Tools open grade series and is described as a coated cemented carbide product; material specifics are catalogue-dependent and should be checked against the manufacturer’s product matrix before selection. For application matching, confirm seat type and toolholder compatibility and consult the cutting data for optimal speeds and feeds. Metav Werkzeuge can supply detailed recommendations based on the intended workpiece and machining strategy. Contact Metav Werkzeuge to discuss application requirements and request cutting data for the Walter Tools ONHF050408-F67 WHH15X; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ONHF050408-F67-WHH15X-WALTER Product label: Fräswendeschneidplatte ONHF050408-F67 WHH15X Walter Tools Manufacturer: Walter Tools Product type: milling indexable insert Facts Plate form: octagonal Plate size designation: 05 Plate thickness designation: 04 Corner radius: 0.8 mm Free angle: 0° (negative) Tolerance class: H Chipbreaker: F67 Special features Grade: WHH15X (coated cemented carbide) Series: Walter grade series — open Material specification: catalogue-dependent Base designation: ONHF050408-F67 ISO designation: ONHF050408-F67 WHH15X UID: ONHF050408-F67-WHH15X-WALTER FAQ What is the primary advantage of the octagonal form? The octagonal form increases the number of usable cutting corners per insert, improving cost efficiency and reducing changeover frequency for the ONHF050408-F67 WHH15X. For which cutting situations is a 0° negative rake recommended? A 0° negative rake is recommended where a stronger cutting edge is needed, such as interrupted cuts or unstable engagements; the insert’s geometry supports robustness in such conditions. How does the chipbreaker F67 affect machining? The chipbreaker F67 promotes controlled chip formation and easier evacuation, which improves surface finish and reduces the risk of chip interference during milling with this Walter Tools insert. Is the WHH15X grade suitable for all materials? The WHH15X is a coated cemented carbide grade; material suitability must be checked against the manufacturer’s product matrix and the catalogue-dependent specifications for the ONHF050408-F67 WHH15X. How many indexable edges does the insert provide? The octagonal shape offers multiple indexable edges; the exact number of usable corners corresponds to the octagonal geometry and standard indexing practice for this insert type. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original factory-new goods of the manufacturer.
ONHF050408-F67 WKP25S WKP25S Wendeplatten - Walter Tools
Benefit from consistent chip control and extended tool life provided by the WKP25S Tiger·tec Silver grade together with the robust F67 chipbreaker and 0° negative rake geometry; ideal for productive steel and cast-iron machining. Order the insert directly via Metav Werkzeuge or contact our consultants for geometry and application advice. ONHF050408-F67 WKP25S indexable milling insert by Walter Tools — Tiger·tec Silver, negative 0° rake A high-performance indexable milling insert designed for machining steel and cast iron, combining the WKP25S coated carbide grade with an octagonal form and F67 chipbreaker for dependable chip control Tiger·tec Silver coated carbide grade WKP25S Octagonal shape for multiple cutting edges 0° negative rake for stable cutting conditions 0.8 mm corner radius for reliable edge strength Durable grade optimised for steel and cast iron The insert uses the Tiger·tec Silver coating technology paired with the WKP25S grade, which is developed specifically for the thermal and abrasive demands of ISO groups P (steel) and K (cast iron). This combination provides improved resistance to flank wear and stable chip formation, reducing unscheduled tool changes. The engineered coating and substrate balance wear resistance and toughness so that the cutting edge preserves geometry over longer production runs, resulting in more consistent component quality and fewer interruptions. Geometry and chip control that enhance process security With an octagonal plate shape and the F67 chipbreaker, the insert offers multiple effective cutting edges and optimised chip evacuation for interrupted and continuous cuts. The 0° negative rake design increases edge robustness and dampens cutting forces, which benefits operations with variable depths of cut or unstable setups. A 0.8 mm corner radius contributes to edge strength while maintaining surface finish; explained simply, a larger corner radius reduces local stress on the edge and improves repeatable performance. Practical benefits for productivity and tool life The insert’s configuration supports stable machining under higher feed and moderate cutting speeds, translating into better productivity per tool index. The combination of coated carbide technology and a proven chipbreaker yields measurable reductions in wear progression and the frequency of index changes. For planning, this means fewer tool interventions and steadier cycle times, helping to improve overall process throughput in milling operations that prioritise both component quality and machine uptime. Handling, typical uses and set-up notes Intended primarily for end and face milling applications in steel and cast iron, the insert is compatible with toolholders that accept the ONHF050408-F67 geometry. During initial implementation, follow the machine builder’s recommendations for cutting data and ensure secure clamping of the insert seat for best results with the WKP25S grade. If uncertain about feed, speed or clamping, technical support is available to match cutting parameters to the component material and machine capabilities. Contact Metav Werkzeuge for tailored cutting data and supply of Walter Tools Tiger·tec Silver inserts to ensure optimal machining performance Technical Data Article number: ONHF050408-F67-WKP25S-WALTER Item name: Fräswendeschneidplatte ONHF050408-F67 WKP25S Series: Tiger·tec Silver Grade: WKP25S Geometry: ONHF050408-F67 Chipbreaker: F67 Shape: octagonal Size: 05 Thickness: 04 Corner radius: 0.8 mm Free rake angle: 0° (negative) Tolerance class: H Material designation: P / K (steel and cast iron) Manufacturer: Walter Tools SKU: ONHF050408-F67-WKP25S-WALTER Facts Compatible with ISO groups P and K Coated cemented carbide grade Designed for stable chip formation and wear resistance Multiple cutting edges per insert due to octagonal form Special features Tiger·tec Silver coating technology WKP25S: coated carbide grade optimised for steel and cast iron F67 chipbreaker for controlled chip formation 0° negative rake for increased edge strength FAQ What materials is this insert suitable for? The ONHF050408-F67 WKP25S indexable milling insert is specified for ISO groups P and K, meaning it is suitable for steel and cast iron machining. How does the Tiger·tec Silver grade benefit production? Tiger·tec Silver with the WKP25S grade enhances wear resistance and edge stability, helping the insert maintain cutting geometry and extend tool life under typical milling conditions. What does the 0° negative rake mean for cutting performance? A 0° negative rake increases edge robustness and reduces the tendency for edge chipping, making the insert suitable for interrupted cuts and less rigid setups when used in Walter Tools tooling systems. Is the octagonal shape advantageous? Yes — the octagonal form provides multiple usable cutting edges per insert, improving cost efficiency and reducing downtime between index changes. Which chipbreaker should be chosen for heavy roughing? The F67 chipbreaker fitted to this insert is designed for reliable chip control in a range of milling operations; for very heavy roughing consult cutting data to confirm best performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ONHU050408-F67 WKP35G U Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold coating and the WKP35G grade delivers reliable wear resistance and wide material coverage for efficient machining; benefit from the octagonal geometry and 0° negative rake for consistent edge life. Order the insert via Metav Werkzeuge or request tailored application advice from the consultants. ONHU050408-F67 WKP35G — Indexable milling insert (for steel and cast iron) by Walter Tools A ONHU050408-F67 WKP35G indexable milling insert designed for high productivity machining of steel (P) and cast iron (K), featuring the Tiger‑tec Gold coated WKP35G grade and an octagonal form for versatile cutter use Tiger‑tec Gold coated grade WKP35G Suitable for steel (P) and cast iron (K) Octagonal form for multiple indexing 0° negative rake for robust cutting Durable grade that extends productive tool life The WKP35G grade, part of the Tiger‑tec Gold family, is a coated cemented carbide solution optimised for the thermal and abrasive demands of machining steel and cast iron. Its coating technology enhances resistance to flank and crater wear, which translates into longer edge life and fewer insert changes during batch runs. For operations where tool change time affects cycle efficiency, this insert supports steady production by reducing unscheduled stoppages and maintaining consistent cutting performance under typical shopfloor conditions. Geometry and chip control for stable, repeatable results The octagonal insert shape combined with a 0° negative rake provides a sturdy cutting edge that tolerates interrupted cuts and heavy engagement. The 0.8 mm corner radius balances strength and surface finish: it increases edge robustness while still enabling fine control of workpiece roughness. The integrated F67 chipbreaker is tailored for predictable chip formation in both short, brittle cast‑iron chips and the longer, more ductile chips from steels, helping to avoid chip entanglement and to improve process security during medium to high material removal rates. Practical integration and selection guidance for production use Compatibility with standard indexable milling cutters is simplified by the insert’s 05 size and common thickness class, allowing easy retrofitting into existing tool bodies where this format is supported. The insert is produced to tolerance class H, ensuring interchangeability and repeatability across batches. For process planners and toolroom staff, pairing this insert with appropriate cutting parameters for steel and cast iron—considering feeds, speeds and coolant strategy—will yield the best balance between tool life and productivity. For additional data or parameter recommendations, the Metav Werkzeuge team provides practical application advice. Contact Metav Werkzeuge for specific application recommendations on Walter Tools Tiger‑tec Gold inserts or to arrange rapid supply and technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: ONHU050408-F67-WKP35G-WALTER Label: Fräswendeschneidplatte ONHU050408-F67 WKP35G Walter Tools SKU: ONHU050408-F67-WKP35G-WALTER Numbers / Facts Corner radius: 0.8 mm Plate size: 05 Plate thickness: 04 Free cutting angle: 0° (negative) Tolerance class: H Special features Grade: WKP35G (Tiger‑tec Gold coating) Breaker: F67 Shape: Octagon Application: Steel (P) and cast iron (K) Execution: U FAQ What materials is this insert suitable for? The ONHU050408-F67 WKP35G insert from Walter Tools is formulated for machining steel (P) and cast iron (K) according to ISO groupings, leveraging the WKP35G grade performance. How does the Tiger‑tec Gold coating benefit machining? The Tiger‑tec Gold coating on the WKP35G inserts reduces abrasive and thermal wear, improving tool life and helping maintain consistent surface quality during prolonged milling cycles. What is the advantage of the octagonal shape? The octagonal form allows multiple indexing positions, increasing usable edges per insert and supporting cost‑effective tool usage in high‑output milling applications with the Walter Tools insert. Which chipbreaker is integrated and what does it do? The insert features an F67 chipbreaker, designed to produce controlled chips for both brittle cast iron and ductile steel, aiding chip evacuation and stable cutting. Is this insert suitable for interrupted cuts or heavy engagement? Yes, the 0° negative rake and 0.8 mm corner radius provide a robust edge geometry that tolerates interrupted cuts and heavier radial depths typical in roughing operations with Walter Tools inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and product names remain the property of their respective owners. Brand names are used solely for explanatory purposes and do not imply any affiliation between our company and the named manufacturers. The offered item is an original, factory‑new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com