ONHU050408-F67 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of a wear-resistant Tiger·tec Gold grade and a geometry optimised for stable cutting to increase uptime and surface quality when machining difficult-to-cut alloys; order directly via Metav Werkzeuge or consult our team for specific process recommendations. ONHU050408-F67 WSM35G Fräswendeschneidplatte by Walter Tools — Tiger·tec Gold coated, octagonal insert for rostfreier Stahl and superalloys The ONHU050408-F67 WSM35G is a coated carbide milling insert designed for heavy-duty machining of rostfreier Stahl and heat-resistant superalloys, offering high edge stability and consistent chip control. Tiger·tec Gold coating for wear resistance and thermal stability Suitable for rostfreier Stahl and superalloys Octagonal shape with 0.8 mm corner radius Negative rake 0° for robust cutting performance High-performance coating and grade for reliable edge life The combination of Tiger·tec Gold technology and the WSM35G grade means a coated carbide substrate that is tuned for heat resistance and controlled wear. Coatings reduce friction and protect the cutting edge against thermal and mechanical loading; this improves tool life and maintains a consistent cutting geometry during production runs. For rostfreier Stahl and other tough-to-cut materials the result is fewer interruptions for tool changes and a more reliable machining cycle. The term coated carbide refers to a cemented carbide substrate with a multi-layer protective film that enhances both toughness and hardness, enabling predictable performance under higher cutting temperatures. Geometry designed for process stability and chip control The octagonal insert form and the F67 chipbreaker are engineered to provide stable chip formation and uniform cutting forces. The 0.8 mm corner radius helps to distribute load across the cutting edge, reducing edge chipping in interrupted or heavy cuts. A negative rake 0° increases insert stability and allows the tool to withstand higher radial forces, which is particularly useful when roughing or when rigidity is limited. These geometric choices contribute to repeatable surface finishes and reduce the risk of built-up edge, which is a common cause of unpredictable tool wear when machining high-strength alloys. Practical integration into production and expected benefits This insert is suitable for job shops and production lines working with rostfreier Stahl and heat-resistant alloys where predictability and uptime matter. By choosing a grade optimised for difficult materials, machining processes gain from improved process security, fewer unplanned tool changes and a steadier surface quality. The insert is compatible with standard milling toolholders for its size class and can be introduced without altering clamping systems. If further process data or cutting parameters are required, technical advice can be provided to align feed and speed with the chosen toolholder and machine capabilities. For procurement or technical consultation on using the Tiger·tec Gold ONHU050408-F67 WSM35G insert for rostfreier Stahl and superalloys, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange supply and application support Technical data Item number: ONHU050408-F67-WSM35G-WALTER Product label: Fräswendeschneidplatte ONHU050408-F67 WSM35G Walter Tools Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Rake angle: 0° (negative) Insert size: 05 Plate thickness: 04 Special features Grade: WSM35G Coating/series: Tiger·tec Gold Chipbreaker: F67 Shape: Octagonal Material compatibility: S / M (rostfreier Stahl, superalloys) Tolerance class: H Execution: U FAQ What materials is this insert suited for? The ONHU050408-F67 WSM35G insert is specified for machining rostfreier Stahl and heat-resistant superalloys (material groups S and M), where thermal resistance and stable chip control are required. How does the Tiger·tec Gold coating benefit the cutting process? The Tiger·tec Gold coating on the WSM35G grade increases wear resistance and thermal stability on the cutting edge, which helps to extend tool life and maintain consistent cutting performance under elevated temperatures. Why choose an octagonal insert form for milling? An octagonal form offers multiple usable edges and a geometry that supports even load distribution; combined with the F67 chipbreaker and a 0.8 mm corner radius, it promotes predictable chip control and improved resistance to edge chipping. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanation; there is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ONMU050408-D57 WKP35G Wendeplatten - Walter Tools
Benefit from high process reliability and consistent tool life with the Tiger‑tec Gold grade and the robust WKP35G coating; the octagonal form and 0.8 mm corner radius support stable chip control in steel and cast iron. Order directly via Metav Werkzeuge or request advice from our consultants for optimal tool selection. Milling indexable insert ONMU050408-D57 WKP35G — Tiger‑tec Gold for steel and cast iron | Walter Tools ONMU050408-D57 WKP35G is a coated carbide milling insert designed for productive finishing and semi‑finishing in steel (P) and cast iron (K), featuring an octagonal form and a chipbreaker optimised for reliable machining Tiger‑tec Gold coating for long life WKP35G grade for steel and cast iron Octagonal insert with 0.8 mm corner radius Negative 0° rake for robust milling Efficient machining through proven grade and coating The combination of the Tiger‑tec Gold series and the WKP35G grade delivers a balanced performance for demanding milling tasks in steel and cast iron. The coated carbide substrate enhances wear resistance and thermal stability, which translates into longer tool life and fewer index changes. For manufacturing operations chasing uptime and repeatable part quality, this specification supports a lower cost per cut by reducing unplanned interruptions and enabling stable cutting parameters even under challenging chip formation conditions. Stable cutting geometry for consistent surface quality The octagonal plate form with a 0.8 mm corner radius and a dedicated D57 chipbreaker creates predictable chip flow and surface finish during shoulder and face milling. The negative 0° rake increases edge robustness, making the insert particularly suitable for interrupted cuts and mixed batch production where tool edge security matters. Engineers evaluating process windows will appreciate that the geometry reduces the sensitivity to minor fixture or material variances, keeping tolerances within expected ranges and improving first‑pass yield. Application guidance and process advantages This insert is tailored for use on unalloyed and alloyed steels as well as grey and nodular cast irons, meeting ISO 513 group classifications P and K. Thanks to its coated design and tolerance class M, the tool supports productive cutting at higher speeds or feed per tooth where appropriate, while preserving edge life. For toolroom and shop‑floor staff unfamiliar with coating technologies: a coated insert like this provides a thin protective layer that reduces abrasive wear and adhesion, which in practice means fewer tool changes and more consistent component surfaces across production runs. Contact Metav Werkzeuge today to discuss how this Walter Tools Tiger‑tec Gold insert can improve cycle times and tool life for specific applications, or to arrange a tailored recommendation from our technical team Technical Data Article number: ONMU050408-D57-WKP35G-WALTER SKU / Label: Fräswendeschneidplatte ONMU050408-D57 WKP35G Manufacturer: Walter Tools Product type: Milling indexable insert Facts Series: Tiger‑tec Gold Grade: WKP35G Plate size code: 05 Plate thickness code: 04 Corner radius: 0.8 mm Clearance angle: 0° (negative) Chipbreaker: D57 Tolerance class: M Special features Coated carbide cutting grade Suitable for steel (P) and cast iron (K) Octagonal insert shape Robust edge for interrupted cuts Optimised chip control for stable surface finish FAQ What materials can this insert machine effectively? The ONMU050408-D57 WKP35G insert from Walter Tools is designed for steel (ISO group P) and cast iron (ISO group K), offering reliable performance on both material classes. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on the WKP35G grade improves wear resistance and thermal stability of the insert, which in turn increases stand time and reduces index changes during continuous production. Why choose a 0° negative rake for milling? A 0° negative rake provides a stronger cutting edge and better resistance to chipping during interrupted cuts, which makes this insert suitable for mixed or unstable machining conditions. What role does the D57 chipbreaker play? The D57 chipbreaker is engineered to control chip formation and evacuation, helping to maintain consistent surface quality and prevent excessive built‑up edge when machining steels and cast irons. Is this insert compatible with standard toolholders for ONMU‑style plates? This insert follows the ONMU050408‑D57 designation and is intended for corresponding milling toolholders that accept the ONMU indexable insert geometry; ensure holder compatibility before assembly. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking. Protected trademarks and trade names are the property of their respective owners. The offered article is an original, factory‑new product of the manufacturer.
ONMU050408-D57 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of robust edge security, versatile material compatibility and proven Tiger‑tec Gold coating for consistently productive milling cycles; order the ONMU050408-D57 WSP45G insert directly via Metav Werkzeuge or consult our advisers for application support. ONMU050408-D57 WSP45G Milling insert — Tiger‑tec Gold, octagonal, 0° negative rake — Walter Tools The ONMU050408-D57 WSP45G is an octagonal milling indexable insert engineered for versatile milling in steel, stainless steel and heat‑resistant alloys, offering high process stability in demanding production environments Tiger‑tec Gold PVD coating for extended wear resistance WSP45G grade for steel, stainless and superalloys Octagonal insert with 0.8 mm corner radius D57 chipbreaker for secure chip control Robust coating and grade for longer tool life The combination of the Tiger‑tec Gold coating and the WSP45G grade provides high resistance to flank wear and thermal loading while maintaining a reliable cutting edge. This PVD‑coated cemented‑carbide composition is formulated to balance toughness and hardness, which reduces edge chipping during interrupted cuts and supports longer intervals between indexings. For production managers seeking predictable tool change intervals, this results in fewer unplanned stops and improved overall equipment effectiveness. The insert’s coated surface also reduces adhesion of built‑up edge when machining materials that tend to smear, contributing to consistent surface quality on workpieces. Geometry that supports secure cutting and repeatability The octagonal shape and corner radius 0.8 mm deliver a favourable mix of cutting strength and multiple usable cutting edges, helping to lower tooling cost per part through more indexings. The 0° negative rake gives a robust cutting geometry that tolerates heavy cuts and interrupted milling better than fragile positive‑rake alternatives; this geometry is particularly effective for roughing passes where edge strength is critical. The D57 chipbreaker has been designed to promote short, controllable chips across a wide range of feeds, reducing the risk of entanglement and improving process stability. For operators new to insert geometry, a chipbreaker channels and breaks chips to protect both the workpiece and the tool, thereby simplifying chip management at the machine. Application guidance and productivity benefits Specified for workpiece groups P / M / S, the insert is suitable for unalloyed and alloyed steels, rostfreie Stähle and heat‑resistant superalloys and titanium, making it a versatile choice across mixed production runs. Using this insert in combination with appropriate cutting data enables higher metal removal rates while maintaining consistent edge life, which often translates into lower cost per component. The tolerance class M supports interchangeability and repeatable seating in modern milling cutters, helping to preserve run‑out accuracy and surface finish. For planning purposes, the insert’s robustness favours operations where stability and repeatable quality are valued over maximal surface‑finish finesse. Practical advantages for workshop integration Because of its multiple indexable edges and stable geometry, the insert contributes to simplified inventory management and predictable tooling cycles. The octagonal format increases the number of available edges per insert, which can reduce purchase frequency and inventory turns. In addition, the combination of a well‑engineered grade and a proven coating supports reliable performance in series production and short runs alike. For technicians, the neutral rake and defined chip control reduce the need for micromanagement of cutting conditions during mixed‑material batches, supporting smoother handovers between shifts and fewer process deviations. Choose Walter Tools Tiger‑tec Gold inserts from Metav Werkzeuge for a measurable step up in milling process security and productivity; contact Metav Werkzeuge for tailored cutting data and application advice at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number / SKU: ONMU050408-D57-WSP45G-WALTER Designation: ONMU050408-D57 WSP45G Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Free rake angle: 0° (negative) Size code: 05 Thickness code: 04 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WSP45G (PVD‑coated cemented carbide) Insert shape: octagonal Chipbreaker: D57 Applicable material groups: P / M / S FAQ What materials can this insert machine effectively? The ONMU050408-D57 WSP45G insert is intended for machining groups P / M / S, meaning it is suitable for steels, rostfreie Stähle and heat‑resistant superalloys and titanium, providing reliable chip control across these materials. How does the D57 chipbreaker affect milling performance? The D57 chipbreaker on the ONMU050408-D57 WSP45G promotes short, manageable chips and more consistent cutting forces, which helps maintain surface quality and reduces the likelihood of chip re‑cutting or entanglement. Is the geometry suited to heavy roughing operations? Yes, the octagonal insert with a 0° negative rake is designed for robust edge strength and performs well in heavy milling and interrupted cuts, offering improved resistance to edge chipping. What tolerance and repeatability can be expected when changing inserts? With tolerance class M, the ONMU050408-D57 WSP45G insert supports consistent seating and repeatable positioning in compatible cutter bodies, aiding dimensional stability and surface finish across indexings. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
OPHN050412-A57 WSN10 N Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide grade WSN10, A57 chipbreaker and an 11° clearance angle for consistent chip control and reliable milling performance; order directly via Metav Werkzeuge or consult the specialists for an optimal tool selection. OPHN050412-A57 WSN10 — Milling indexable insert, A57 chipbreaker, octagonal form — Walter Tools The OPHN050412-A57 WSN10 is a coated carbide indexable insert designed for general milling applications where dependable chip control and reproducible cutting performance are required Coated carbide grade WSN10 11° clearance angle for secure cutting A57 chipbreaker for reliable chip control Octagonal form with 1.2 mm corner radius High-performance carbide grade for stable machining The coated carbide grade WSN10 provides a balance of wear resistance and edge security that supports efficient machining cycles. Combined with the A57 chipbreaker, the insert helps to control fragments and evacuate chips consistently, which reduces process interruptions and improves cycle times. The octagonal form and 1.2 mm corner radius contribute to edge strength, helping to maintain surface quality over repeated indexing. These characteristics promote a dependable performance profile suited to series production and mixed-batch machining where repeatability matters. Precision geometry that improves tool life and surface quality The 11° clearance angle reduces rubbing between insert flank and workpiece, lowering friction and the thermal load on the cutting edge during milling passes. The design of the chipbreaker optimises chip formation for predictable evacuation, which results in fewer built-up edges and a more uniform finish. The insert’s geometry and tolerance class H support stable seat positioning and consistent cutting geometry in compatible tool holders. For materials and the exact cutting-parameter window, the material suitability is catalogue-dependent; please check the product matrix to match the insert variant to the intended workpiece material. Practical benefits for production workflows Using the OPHN050412-A57 WSN10 indexable insert can reduce downtime associated with poor chip control and unexpected wear, thanks to the combination of coated carbide, robust chipbreaking and a compact octagonal form. The insert’s configuration supports straightforward indexing and predictable tool-change intervals, helping to simplify process planning. While the insert is engineered for productive cutting, the final choice of grade and geometry should be aligned with the specific machining task and holder system to achieve the best balance of tool life and productivity. Contact Metav Werkzeuge to discuss the OPHN050412-A57 WSN10 and ensure the correct insert variant for the intended application; Metav Werkzeuge specialists are available to advise on matching inserts to the process and tooling environment. Technical data SKU: OPHN050412-A57-WSN10-WALTER Label: Fräswendeschneidplatte OPHN050412-A57 WSN10 Walter Tools Product type: Milling indexable insert Manufacturer: Walter Tools Facts Clearance angle: 11° Corner radius: 1.2 mm Insert size code: 05 Thickness code: 04 Tolerance class: H Special features Grade: WSN10 (coated carbide) Chipbreaker: A57 Shape: Octagonal Series: Walter Schneidstoffsorte - Serie offen Execution code: N Material: catalogue-dependent FAQ What materials is this insert suitable for? Material suitability is catalogue-dependent; consult the product matrix to determine whether the OPHN050412-A57 WSN10 is specified for the intended workpiece material and application. How does the A57 chipbreaker benefit milling operations? The A57 chipbreaker on the OPHN050412-A57 WSN10 helps form and break chips predictably, improving evacuation and reducing the risk of built-up edge and tool damage during milling. What does the tolerance class H indicate for the insert? Tolerance class H signifies the manufacturing tolerance for seating and geometry; for critical applications, check that the tool holder and seat conform to the required tolerance for optimal stability. Can the corner radius influence surface finish? Yes, the 1.2 mm corner radius contributes to edge strength and helps achieve consistent surface quality while balancing cutting forces and edge life for milling passes. Is the OPHN050412-A57 WSN10 suitable for high-volume production? The coated carbide grade and chipbreaker design support repeatable performance, making the insert a practical option for production environments when matched to the correct holder and cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only and do not imply any affiliation with our company. The listed article is an original, factory-new product of the respective manufacturer.
OPHN0504ZZN-A57 WAK15 Wendeplatten - Walter Tools
Benefit from the combination of the WAK15 uncoated carbide grade, an octagonal insert format and the A57 chipbreaker to achieve reliable, low-adhesion machining of aluminium and other non‑ferrous metals; order the OPHN0504ZZN-A57 WAK15 directly via Metav Werkzeuge or consult our specialists for application advice. OPHN0504ZZN-A57 WAK15 milling insert (octagonal, 11° free angle) — Walter Tools The OPHN0504ZZN-A57 WAK15 is an octagonal milling insert engineered for efficient machining of aluminium and other non‑ferrous metals, suited to high‑productivity finishing and semi‑finishing operations Optimised for aluminium and non‑ferrous metals Octagonal design for eight cutting edges A57 chipbreaker reduces material adhesion 11° free angle for improved surface quality Improved aluminium machining with a sharp, low‑adhesion grade The WAK15 grade is an uncoated carbide developed for non‑ferrous materials, delivering a sharp cutting edge and consistent chip control. Combined with the A57 chipbreaker, the geometry reduces material adhesion and built‑up edge, which is especially relevant when working with sticky alloys such as aluminium and similar non‑ferrous metals. This leads to longer uninterrupted runs, fewer regrinds and a measurable uplift in process throughput while maintaining a stable cutting action. Consistent surface finish thanks to optimised geometry and clearance An 11° free angle and the insert’s precise geometry contribute directly to a smoother surface finish and reduced burr formation. The tolerance class H ensures repeatable positioning in the cutter body, which supports stable toolpaths and predictable component quality. These attributes make the insert appropriate where surface integrity and dimensional consistency are required, for example in finishing faces or lightweight structural components. Economy through multiple edges and simple indexing The octagonal format provides eight usable cutting edges per insert, reducing tool change frequency and the cost per edge. With a compact profile (size 05, thickness 04) and robust form, the insert offers a balance between edge strength and accessibility in tight pockets. The combination of shape and grade also simplifies inventory management: fewer unique items are needed to cover a wide range of non‑ferrous applications, while downtimes for tool replacement are minimised. Material range and practical application notes Designed within the Walter N‑Sortensystem, this insert is tailored for aluminium and similar non‑ferrous alloys such as copper and brass. The uncoated carbide substrate performs best with a suitably sharp geometry and recommended cutting parameters to avoid smearing; coolant strategy and feed choice should be matched to alloy and operation. For end‑users seeking consistent chip evacuation and clean edges in high‑speed milling of non‑ferrous components, this insert presents a pragmatic solution. For application guidance or to specify the Walter Tools OPHN0504ZZN-A57 WAK15 for a particular aluminium machining task, contact Metav Werkzeuge for tailored recommendations at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: OPHN0504ZZN-A57-WAK15-WALTER Article designation: OPHN0504ZZN-A57 WAK15 Manufacturer: Walter Tools Product type: milling insert Series: Walter N‑Sortensystem Key dimensions & tolerances Size: 05 Thickness: 04 Free angle: 11° Tolerance class: H Design & material compatibility Insert form: octagonal (eight cutting edges) Chipbreaker: A57 Grade: WAK15 (uncoated carbide) Execution: N Suitable for: aluminium and other non‑ferrous metals FAQ What materials is this insert designed for? The OPHN0504ZZN-A57 WAK15 insert is intended for aluminium and other non‑ferrous metals; the WAK15 grade and A57 chipbreaker provide low adhesion and controlled chip formation. How many cutting edges does the octagonal insert provide? The octagonal design offers eight usable cutting edges, which extends tool life per insert and reduces the frequency of index changes. What does the 11° free angle affect in machining? An 11° free angle improves clearance behind the cutting edge, reducing friction and supporting a finer surface finish when milling non‑ferrous components. Is the grade coated or uncoated and why does that matter? WAK15 is an uncoated carbide grade optimised for sharp edges and non‑ferrous alloys; the lack of coating helps avoid material smearing and built‑up edge with soft, sticky materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is a recognised global manufacturer of precision cutting tools. Protected trademarks and brand names mentioned are the property of their respective owners and are referenced solely for explanation. There is no affiliation between our company and the named brands; the offered item is an original, brand‑new product from the manufacturer.
OPHN0504ZZN-A57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP25S grade for consistent chip control and long tool life; the octagonal form offers multiple cutting edges for economical use. Order the OPHN0504ZZN-A57 WKP25S milling indexable insert directly via Metav Werkzeuge or ask the consultants for application advice. OPHN0504ZZN-A57 WKP25S milling indexable insert, Tiger‑tec Silver – for steel and cast iron | Walter Tools A OPHN0504ZZN-A57 WKP25S milling indexable insert from Walter Tools, designed for productive machining of steel and cast iron with a dedicated chipbreaker and robust coated grade. Tiger‑tec Silver coating for longevity Optimised for steel and cast iron machining Octagonal form for eight usable edges 11° relief angle for stable cutting Reliable productivity through advanced coating and grade The OPHN0504ZZN-A57 WKP25S insert combines the Tiger‑tec Silver coating with the WKP25S grade to deliver reliable wear resistance and consistent cutting performance in the machining of steel and cast iron. The coating improves thermal stability while the grade’s microstructure is tuned to handle the typical heat and abrasion of P and K materials. This results in extended tool life and fewer insert changes, which supports higher overall machine uptime and lower per-component manufacturing cost. Emphasis on consistent chip control reduces rework and improves process repeatability. Geometry that raises productivity and reduces handling time The octagonal plate form provides eight indexing positions, which increases tool economy by maximising usable edges per insert. The integrated A57 chipbreaker is shaped to promote reliable chip segmentation for the target materials, reducing the risk of long, tangled swarf. The moderate 11° relief angle helps maintain cutting-edge stability under interrupted or heavy engagement conditions, while the tolerance H ensures repeatable seating on the cutter body for precise machining. Together these design choices cut handling time, improve stability and support efficient batch runs. Practical integration and application guidance for workshop use The insert is tailored for slotting and peripheral milling operations where consistent surface finish and dimensional control on steel and cast iron are required. Its combination of coated substrate and chipgeometry allows productive cutting strategies with straightforward parameter selection: conservative feeds for roughing, then optimised speeds for finishing to exploit the coating’s thermal benefits. For toolroom planning, the octagonal design and standard plate size simplify inventory management and reduce tooling costs per part, making this insert suitable for both series production and flexible jobshop work. For tailored advice or to secure supply of Walter Tools OPHN0504ZZN-A57 WKP25S inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 for ordering and technical consultation Technical data SKU: OPHN0504ZZN-A57-WKP25S-WALTER Article: Fräswendeschneidplatte OPHN0504ZZN-A57 WKP25S Brand: Walter Tools Product type: Milling indexable insert Facts Free angle: 11° Plate size: 05 Plate thickness: 04 Tolerance class: H Plate form: Octagonal Special features Series: Tiger‑tec Silver Grade: WKP25S Chipbreaker: A57 Material suitability: Steel (P) and Cast iron (K) Execution: N FAQ What materials is this insert intended for? The OPHN0504ZZN-A57 WKP25S insert from Walter Tools is specified for machining steel (material group P) and cast iron (material group K) according to the grade and chipbreaker characteristics. How many usable cutting edges does each insert provide? The octagonal plate form gives eight usable cutting edges, which improves economy and reduces the frequency of index changes. What advantage does the Tiger‑tec Silver series bring? The Tiger‑tec Silver series provides enhanced thermal resistance and wear protection; in the WKP25S grade this supports stable cutting and predictable tool life in demanding steel and cast-iron applications. Which chipbreaker is fitted and what is its function? The insert features the A57 chipbreaker, designed to produce short, controlled chips on P and K materials, improving swarf handling and surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory-new goods from the manufacturer.
OPHN0504ZZN-A57 WSN10 Wendeplatten - Walter Tools
Benefit from WSN10 coated carbide performance, chipbreaker A57 for stable chip formation and the octagonal geometry with an 11° clearance angle to keep milling cycles productive and precise; order the OPHN0504ZZN-A57 WSN10 directly via Metav Werkzeuge or ask their consultants for application advice. OPHN0504ZZN-A57 WSN10 – milling indexable insert, octagonal form, 11° clearance | Walter Tools The OPHN0504ZZN-A57 WSN10 is a coated carbide milling indexable insert designed for versatile industrial milling tasks, offering a balanced combination of edge life and reliable chip control across a broad range of applications Coated carbide grade WSN10 Octagonal insert form 11° clearance angle for stable cutting Chipbreaker A57 for controlled chips Consistent productivity through coated carbide performance The core advantage of this insert is the coated carbide cutting material in WSN10, which is engineered to deliver durable edge life under continuous milling conditions. The applied coating enhances wear resistance and reduces flank abrasion, resulting in longer intervals between indexing or replacement and therefore lower downtime. Combined with the chipbreaker A57, the geometry promotes stable chip formation, reducing the risk of built-up edge and helping to maintain consistent feed rates and surface finishes. For production environments focused on efficiency, these features translate into fewer interruptions and a more predictable tool lifecycle. Geometry that improves edge utilisation and surface quality The octagonal form gives multiple usable cutting edges per insert and a compact footprint for secure clamping; this contributes to economical edge rotation and predictable repeatability in serial machining. The 11° clearance angle supports smooth entry and exit from the cut, helping to reduce cutting forces and heat concentration at the cutting edge. The tolerance class H indicates a high-precision manufacturing standard, which aids in achieving consistent runout and repeatable part quality. Together, geometry and tolerance support reliable surface finishes and reduce the need for rework in batch production. Practical integration, material guidance and handling benefits The insert is specified as catalogue-dependent for base material options, so the OPHN0504ZZN-A57 WSN10 should be matched to the machine setup and clamping system according to the toolholder matrix. The size and thickness designations simplify selection for compatible holders and cutters, while the series description highlights that the grade is a Walter Tools offering intended for industrial milling. For components where material compatibility or cutting data are uncertain, verification against the product matrix is recommended to optimise cutting speeds and feeds. Careful selection based on this guidance helps to ensure repeatable performance and reliable tool life. Consult Metav Werkzeuge for tailored recommendations on using the Walter Tools WSN10 grade and the OPHN0504ZZN-A57 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 for technical matching and ordering support Technical data Article number: OPHN0504ZZN-A57-WSN10-WALTER SKU: OPHN0504ZZN-A57-WSN10-WALTER Product type: milling indexable insert Designation: OPHN0504ZZN-A57 WSN10 Manufacturer: Walter Tools Key figures Shape: octagonal Size: 05 Thickness: 04 Clearance angle: 11° Chipbreaker: A57 Tolerance class: H Features and materials Grade: WSN10 (coated carbide) Series: Walter Schneidstoffsorte - Serie offen Base material: catalogue-dependent Execution: N ISO designation: OPHN0504ZZN-A57 WSN10 FAQ Which materials is this insert suitable for? The OPHN0504ZZN-A57 WSN10 is a coated carbide insert; check the Walter Tools product matrix to confirm suitability for specific materials, as base material options are catalogue-dependent. What advantage does the A57 chipbreaker provide? The chipbreaker A57 improves chip control and promotes stable chip formation during milling, helping to reduce interruptions and supporting consistent surface quality. How does the octagonal form benefit production? The octagonal form provides multiple usable cutting edges and compact seating for secure clamping, which increases edge utilisation and reduces tooling costs per part. What does tolerance class H mean for assembly? Tolerance class H denotes a precise manufacturing tolerance that helps ensure consistent seating and repeatable runout when the insert is mounted in a compatible toolholder. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. There is no connection between our company and the mentioned brands; references are for explanatory purposes only. The offered article is original, factory-new merchandise from the manufacturer.
OPHX0504ZZN-A57 WAK15 Wendeplatten - Walter Tools
The combination of a sharp WAK15 cutting grade, an A57 chipbreaker and an 11° clearance angle delivers reliable chip control and excellent performance in aluminium machining; this reduces machining time and improves surface finish. Order the insert directly via Metav Werkzeuge or consult the team for cutting data and holder compatibility. OPHX0504ZZN-A57 WAK15 — Walter Tools milling indexable insert, octagonal, 11° clearance OPHX0504ZZN-A57 WAK15 is a specialised milling insert for high-productivity machining of aluminium and other non-ferrous metals in industrial production environments. Uncoated carbide grade WAK15 Optimised for aluminium and non-ferrous metals A57 chipbreaker for consistent chip control Octagonal form with 11° clearance Precision geometry for non‑ferrous machining and improved cycle times The insert’s geometry, based on the Walter N-grade system, combines a very sharp cutting edge with the A57 chipbreaker, specifically developed for non‑ferrous materials. This combination helps to prevent material adhesion and to produce continuous, controlled chips when cutting aluminium, copper or brass. The result is reduced burr formation and more stable cycle times in series production. The uncoated carbide substrate ensures a crisp edge for high‑quality surface finishes while maintaining economical tool life in softer alloys. Robust design that simplifies process reliability and tool handling An octagonal form and a standardised tolerance class H enable flexible indexing and multiple cutting edges per insert, increasing productivity per tool change. The 11° clearance reduces rubbing on the flank face, lowering heat build‑up and wear during high feed operations. These mechanical benefits support consistent dimensional accuracy and repeatability in milling operations, which is especially valuable where component tolerances and surface quality are critical. Material suitability and system integration for workshop efficiency The WAK15 grade is an uncoated carbide selected for N‑group materials according to ISO 513; it is thus particularly suited to aluminium and other non‑ferrous metals. Integration into existing milling heads is straightforward thanks to the standardised OPHX geometry and the A57 chipbreaker form. Process engineers will value the clear correspondence between insert geometry and expected machining behaviour, allowing easier selection of cutting speeds and feeds for optimised throughput. Operational advantages and application scenarios In finish and semi‑finish milling of non‑ferrous components—such as housing faces, profiles and thin‑walled parts—the insert offers a balance of edge sharpness and chip control that minimises rework. The design reduces the risk of built‑up edge on the tool, contributing to longer intervals between inspections and steady production output. For applications requiring predictable surface quality and efficient material removal, the combination of WAK15 and the A57 chipbreaker delivers tangible gains in process stability. Contact Metav Werkzeuge for tailored cutting data, holder suggestions and availability of Walter Tools OPHX0504ZZN-A57 WAK15 — info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: OPHX0504ZZN-A57-WAK15-WALTER Name: OPHX0504ZZN-A57 WAK15 Manufacturer: Walter Tools Product type: milling indexable insert Facts Clearance angle: 11° Plate form: octagonal Plate size: 05 Plate thickness: 04 Tolerance class: H Special features Walter N‑grade system Grade: WAK15 (uncoated carbide) Optimised for aluminium and non‑ferrous metals A57 chipbreaker for chip control Series: Walter N‑Sortensystem FAQ Is this insert suitable for aluminium alloys? Yes. The OPHX0504ZZN-A57 WAK15 insert is specifically designed for aluminium and other non‑ferrous alloys, with the WAK15 grade and A57 chipbreaker providing controlled chip formation. Can the insert be used for stainless steel or hardened steel? No. The uncoated WAK15 grade and the insert geometry are optimised for non‑ferrous materials and are not intended for stainless or hardened steels. How many cutting edges are available per insert? The octagonal form allows multiple indexing positions, providing several usable cutting edges before replacement; exact count depends on orientation and holder type. Does the insert require a coated grade for high‑speed milling? For aluminium machining, the uncoated WAK15 grade often provides superior edge sharpness; coating is not required and may even worsen adhesion in some non‑ferrous applications. Which system or holders are compatible with the OPHX geometry? The insert conforms to OPHX standard dimensions; it is compatible with milling heads and toolholders that accept OPHX0504 style inserts and support the A57 chipbreaker form. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and product names remain the property of their respective owners. Brand names and registered marks are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is original, factory‑new merchandise of the manufacturer.
OPHX0504ZZN-A88 WPM15G WPM15G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger‑tec Gold coating and the WPM15G grade for extended tool life and consistent chip control; the octagonal form with an A88 chipbreaker ensures stable machining and easy indexation. Order the insert through Metav Werkzeuge or consult Metav Werkzeuge for application recommendations and availability. OPHX0504ZZN-A88 WPM15G indexable milling insert – Tiger‑tec Gold, A88 chipbreaker (Walter Tools) OPHX0504ZZN-A88 WPM15G is an octagonal indexable milling insert designed for productive milling operations and geared towards broad material coverage with a Tiger‑tec Gold coated carbide grade. Tiger‑tec Gold coated for enhanced wear resistance A88 chipbreaker for consistent chip control Octagonal form with 11° relief for versatile milling WPM15G grade for broad material coverage Longer tool life through premium coating and grade The insert is supplied in the Tiger‑tec Gold family and uses the WPM15G grade, a coated carbide formulation developed for durable performance. The coating reduces flank and crater wear, which leads to fewer insert changes and more uninterrupted production time. In practice, this means a measurable reduction in tool-change downtime and improved component consistency, especially in batch or series production. The technological advantage of the coating is translated directly into cost-efficiency and predictable process windows. Predictable chips and process stability with a dedicated chipbreaker The integrated A88 chipbreaker is engineered to control chip formation under varying cutting conditions. By breaking and directing chips reliably, the insert reduces the risk of recutting and tool damage, thereby increasing safety and repeatability in the machining process. For automated or heavily loaded milling operations, this chip control contributes to higher first-pass yields and fewer disturbances to downstream operations. The chipbreaker’s behaviour is optimised for the grade and geometry, providing a coherent system rather than an add-on feature. Flexible geometry for a range of milling tasks The octagonal form combined with an 11° relief angle offers eight usable cutting edges and a geometrical setup that balances edge strength with accessibility. This geometry suits a wide variety of roughing and finishing tasks and is especially beneficial where quick indexation is required to maintain tool economy. The insert’s form factor supports stable engagement in interrupted cuts and offers a compact seating that integrates with common cutter bodies, enabling efficient tooling layouts on modern milling heads. Consistency and application support for production environments Supplied by Walter Tools, the insert is manufactured to a production standard that emphasises repeatability and process security. The designation OPHX0504ZZN-A88 defines the contour and size family, while the WPM15G grade signals the intended application window; empirical testing in the production environment is recommended to fine-tune cutting parameters. Documentation and grade data are available for process engineers to match speeds and feeds to material families, supporting a rapid learning curve and stable results across shifts. For reliable, high‑productivity milling with Walter Tools’ Tiger‑tec Gold inserts, contact Metav Werkzeuge for tailored advice and stock information. Technical Data SKU: OPHX0504ZZN-A88-WPM15G-WALTER Item: Fräswendeschneidplatte OPHX0504ZZN-A88 WPM15G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPM15G Execution: X ISO designation: OPHX0504ZZN-A88 WPM15G Facts Relief angle: 11° Size designation: 05 Thickness designation: 04 Tolerance class: H Special features Chipbreaker: A88 Form: octagonal Coating: Tiger‑tec Gold (coated carbide) Series description: WPM15G is a Walter grade; coated carbide; check product matrix for material suitability FAQ What materials is this insert suitable for? The WPM15G grade in the OPHX0504ZZN-A88 WPM15G insert is designed for broad material coverage; material suitability should be verified against the product matrix for optimal cutting parameters. How many cutting edges are available per insert? The octagonal form provides multiple indexable edges; the exact count depends on the seating and orientation in the chosen cutter body. What benefit does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WPM15G grade enhances wear resistance and contributes to longer tool life and more stable machining results. Is the A88 chipbreaker suitable for interrupted cuts? The A88 chipbreaker offers controlled chip formation that supports process stability in interrupted and continuous milling operations. Can the insert be used with common Walter toolholders? The OPHX0504ZZN-A88 WPM15G geometry is compatible with standard indexable cutter bodies specified for this insert family; verify seating and clamping specifications before assembly. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer.
OPHX0504ZZR-A57 WAK15 Wendeplatten - Walter Tools
High-performance machining of aluminium and other non‑ferrous metals is achieved through the combination of the WAK15 uncoated carbide grade and a precise 11° relief geometry; the octagonal design and A57 chipbreaker support consistent chip control and reduced downtime. Order the insert directly via Metav Werkzeuge or consult our specialists for application recommendations. OPHX0504ZZR-A57 WAK15 milling insert — uncoated carbide for aluminium and non‑ferrous metals | Walter Tools The OPHX0504ZZR-A57 WAK15 is an octagonal milling insert designed for efficient, low‑adhesion machining of aluminium and other non‑ferrous metals within modular Walter N‑system toolholders. Uncoated carbide WAK15 for aluminium Octagonal geometry for versatile orientation 11° relief angle for sharp cutting action Chipbreaker A57 for improved chip control Faster, cleaner aluminium machining with sharp uncoated carbide The combination of the WAK15 grade — an uncoated carbide specifically developed for N‑materials — and a reamed cutting geometry delivers low friction and reduced material adhesion during aluminium cutting. This minimises built‑up edge and the risk of smearing on the workpiece, which in turn supports higher effective cutting speeds and more consistent part quality. Where softer, ductile non‑ferrous metals are in use, this insert’s geometry reduces the need for excessive lubricant, offering a pragmatic balance between productivity and process cleanliness. Consistent surface finish and dependable chip control The octagonal shape together with the 11° relief creates multiple indexed cutting edges and a reliable contact angle for light to medium finishing passes. The integrated chipbreaker A57 promotes predictable chip formation and evacuation, which reduces the likelihood of re‑cutting or surface blemishes. With a tolerance class H, the insert supports repeatable positioning and minimal run‑out in the tool body, contributing to reproducible surface integrity and reduced rework in series production. Simple integration into Walter N‑system applications Designed for the Walter N‑Sortensystem, the insert fits toolholders configured for the OPHX geometry and is produced in the compact size 05 with thickness 04, allowing compact cutter assemblies and high index counts per cutter. For process planning, the insert is coded for N‑materials and is therefore recommended for aluminium and other non‑ferrous alloys according to ISO 513. For machining parameter recommendations or holder compatibility, Metav Werkzeuge can provide cutting data and holder suggestions tailored to the workpiece alloy and required surface finish. Durable choice for specialised non‑ferrous production Backed by the Walter Tools heritage in precision cutting, this insert is intended for production environments demanding consistent results and reduced cycle interruption. The uncoated carbide base yields excellent edge clarity for soft metals, while the geometry and chip control features reduce operator intervention. In short runs or in larger batches where aluminium components must meet tight tolerances, the insert offers a focused solution that supports both productivity and process reliability. Request cutting data and tailored application advice for the Walter Tools OPHX0504ZZR-A57 WAK15 from Metav Werkzeuge via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: OPHX0504ZZR-A57-WAK15-WALTER Designation: OPHX0504ZZR-A57 WAK15 Product type: Milling indexable insert Brand: Walter Tools Series: Walter N‑Sortensystem Grade: WAK15 (uncoated carbide) Shape: Octagonal Facts Relief angle: 11° Size: 05 Thickness: 04 Tolerance class: H Special features Chipbreaker: A57 Execution: X Material code: N (non‑ferrous metals) Suitable for: Aluminium and other non‑ferrous metals Series description: Walter N‑Sortensystem FAQ Which materials is this insert intended for? The OPHX0504ZZR-A57 WAK15 insert is optimised for aluminium and other non‑ferrous metals (material group N) and is recommended where sharp edges and low adhesion are required. Is the WAK15 grade coated? No, WAK15 is an uncoated carbide grade, selected to provide very sharp cutting edges and to reduce friction and material build‑up when machining softer non‑ferrous alloys. How does the A57 chipbreaker improve machining? The A57 chipbreaker promotes predictable chip formation and evacuation, reducing re‑cutting and improving surface quality during machining of aluminium and similar alloys. Which toolholders accept this geometry? This insert is part of the Walter N‑Sortensystem and is compatible with milling cutters and holders designed for the OPHX0504 geometry and associated clamping systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; there is no connection between our company and the named brands. The item offered is original, factory‑new goods of the manufacturer. Walter Tools is referenced as the producing brand.
P20200-1.1 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of the high-performance Tiger·tec Silver coating combined with a robust WKP35S carbide grade for consistent productivity and reliable chip control in machining tasks; order the insert directly via Metav Werkzeuge or consult our technical team for application support. P20200-1.1 WKP35S – milling indexable insert, Tiger·tec Silver coating, for Stahl and Gusseisen (Walter Tools) The P20200-1.1 WKP35S is a coated carbide milling insert from Walter Tools designed for efficient roughing and finishing operations in Stahl and Gusseisen, offering a balance of wear resistance and stable chip formation Tiger·tec Silver coating technology Coated carbide grade WKP35S Optimised for Stahl and Gusseisen Chipbreaker geometry 1.1 Consistent productivity through advanced coating and substrate The combination of the Tiger·tec Silver coating and a coated carbide substrate provides a reliable foundation for sustained cutting performance. This surface technology improves heat resistance and reduces abrasive wear, which in turn extends the effective cutting life of the insert and lowers tool-change frequency. For machining Stahl and Gusseisen, a coated substrate helps tolerate the higher temperatures and the abrasive conditions typical of these material groups, resulting in fewer interruptions and a steadier production flow. Predictable chip control and process stability The integrated chipbreaker 1.1 geometry is engineered to influence chip formation predictably, breaking long or stringy swarf into manageable fragments and reducing the risk of built-up edge. Stable chip evacuation contributes directly to surface quality and tool life, while lowering the load on fixturing and workpiece handling systems. Process planners will find that controlled swarf behaviour improves repeatability on multi-pass operations and simplifies coolant and extraction requirements. Broad applicability and straightforward integration in toolchains As a member of the Tiger·tec Silver series, this insert supports a range of common milling strategies across mixed-production environments. The grade WKP35S is tailored to the demands of both roughing and semi-finishing when machining Stahl and Gusseisen, so fewer insert types are needed across varied jobs. The insert simplifies inventory decisions and helps achieve consistent component quality when paired with standard toolholders and established cutting parameters. The clear ISO designation aids in straightforward procurement and process documentation. For secure, productive milling with Walter Tools' Tiger·tec Silver WKP35S inserts—reach out to Metav Werkzeuge for detailed recommendations, availability and application advice at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: P20200-1.1-WKP35S-WALTER Designation: P20200-1.1 WKP35S Manufacturer: Walter Tools Product type: milling indexable insert Facts Series: Tiger·tec Silver Grade: WKP35S Chipbreaker: 1.1 Suitable material groups: P / K Special features Coated carbide insert Optimised for Stahl and Gusseisen Stable chip formation Reduced abrasive wear FAQ What materials is this insert suitable for? The P20200-1.1 WKP35S insert is specified for machining Stahl and Gusseisen, using the Tiger·tec Silver coating to handle the typical heat and wear mechanisms of these groups. What does the chipbreaker 1.1 mean for process control? Chipbreaker 1.1 on the WKP35S grade offers controlled fragmentation to improve swarf evacuation and surface finish when milling, aiding consistent cycle times and reduced rework. Is this suitable for finishing passes as well as roughing? Yes, the coated carbide WKP35S grade balances wear resistance and toughness, making this insert appropriate for both roughing and semi-finishing applications in many machining setups. How does the Tiger·tec Silver series benefit tool life? The Tiger·tec Silver coating increases thermal and abrasive resistance, which typically extends tool life and provides more stable cutting conditions across long production runs. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P20200-1.2 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and a precise chipbreaker 1.2 to achieve stable chip formation and extended tool life in milling operations; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. P20200-1.2 WKP35S indexable milling insert – Tiger·tec Silver, chipbreaker 1.2 (Walter Tools) The P20200-1.2 WKP35S is an indexable milling insert engineered for high‑productivity machining of steel and cast iron under demanding conditions. Tiger·tec Silver coating for improved wear resistance WKP35S grade for stable chip formation Optimised for steel and cast iron applications Chipbreaker 1.2 for controlled chip flow Longer tool life through advanced coating technology The Tiger·tec Silver multi‑layer coating provides a balance of wear resistance and thermal stability that translates into fewer tool changes and more uptime. On the shop floor, the coating reduces abrasive and adhesion wear mechanisms that typically shorten insert life, so the cutting edge maintains geometry for longer. This leads to measurable gains in productivity and consistent part quality when machining unalloyed or alloyed steel. Controlled chip management for safer, cleaner machining The integrated chipbreaker 1.2 is designed to produce short, controlled chips when cutting tougher materials, helping avoid long, tangled swarf and minimising interruptions. The controlled chip flow reduces the risk of rework and tool damage, and supports a stable cutting process with predictable forces. In practice, improved chip control contributes directly to reduced cycle times and fewer machine stoppages, enhancing overall process reliability. Versatile performance across steel and cast iron Designed for ISO groups P and K, the insert offers application flexibility across both steel and cast iron components. The WKP35S tungsten‑carbide grade and coating combination is tuned to the thermal and abrasive characteristics of these material families, allowing a single insert type to cover multiple workpiece types. This versatility reduces tool inventory complexity while maintaining cutting performance for a range of turning and milling tasks. Precision geometry for consistent results and reduced rework The insert geometry delivers a stable cutting edge and consistent engagement with the workpiece, supporting high surface quality and predictable tool wear. Stable edge behaviour reduces the need for frequent inspection and adjustment, which in turn lowers handling time and the probability of scrap. The result is improved process security and better repeatability across production batches. For tailored application advice or to secure the P20200-1.2 WKP35S indexable milling insert from Walter Tools, contact Metav Werkzeuge for delivery and technical consultancy at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: P20200-1.2-WKP35S-WALTER Product type: Indexable milling insert Designation: P20200-1.2 WKP35S Brand: Walter Tools Facts Chipbreaker: 1.2 Grade/series: WKP35S / Tiger·tec Silver Material groups: P / K (steel / cast iron) Special features Coated carbide grade Optimised for steel and cast iron machining Stable chip formation and consistent cutting edge Suitable for high‑productivity milling FAQ What materials is this insert suitable for? The P20200-1.2 WKP35S insert is optimised for ISO groups P and K, meaning it is intended primarily for steel and cast iron machining. How does the Tiger·tec Silver coating benefit operation? The Tiger·tec Silver coating on the P20200-1.2 WKP35S increases wear resistance and thermal stability, which prolongs tool life and supports consistent surface finish under higher cutting temperatures. What is the purpose of the 1.2 chipbreaker? The 1.2 chipbreaker on this insert promotes controlled chip flow, producing short, manageable chips that reduce swarf issues and improve process stability. Can this insert reduce tool inventory complexity? Yes. The versatility of the WKP35S grade with Tiger·tec Silver coating allows one insert type to cover multiple jobs in steel and cast iron, which can simplify tooling assortments. Is the cutting geometry suitable for repeatable production runs? The precision geometry of the P20200-1.2 WKP35S is designed for a stable cutting edge, delivering repeatable results and reducing the likelihood of rework in series production. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (marketed as Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Brand names and protected product designations are used for explanatory purposes only and remain the property of their respective owners. No connection or endorsement by the named manufacturers is implied. The offered article is original, factory‑new goods of the manufacturer.
P20200-1.3 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating and the WKP35S carbide grade for extended tool life and consistent edge stability. The optimised 1.3 chipbreaker delivers reliable chip control when machining steel and cast iron. Order the insert directly via Metav Werkzeuge or consult their technical team for tailored application advice. P20200-1.3 WKP35S indexable milling insert – Tiger·tec Silver, 1.3 chipbreaker (Walter Tools) The P20200-1.3 WKP35S is an indexable milling insert designed for productive machining of steel and cast iron, combining a coated carbide grade with a dedicated chipbreaker for stable, repeatable cutting performance. Tiger·tec Silver coated carbide grade WKP35S Optimised 1.3 chipbreaker for reliable chip control Designed for steel and cast-iron machining Compatible with P20200-1.3 tool geometries Longer tool life and consistent cutting performance The Tiger·tec Silver coating, applied to the WKP35S grade, provides enhanced wear resistance and thermal stability under typical milling conditions. This combination of coating and coated carbide ensures a more stable cutting edge, which translates into fewer insert changes and improved uptime. For process-oriented production environments, the improved lifecycle reduces non-productive time and contributes to a steadier output without compromising surface quality or dimensional repeatability. Predictable chip formation and surface quality The 1.3 chipbreaker is engineered to control chip form when cutting both steel (P) and cast iron (K), reducing the risk of long, entangling chips and promoting secure evacuation. Predictable chip flow improves operator safety and toolpath reliability while supporting consistent surface finishes. Explaining the function in plain terms: the chipbreaker geometry modifies how the metal separates during cutting, so the machining process remains stable even under varying depths of cut or feed rates. Easy integration and reliable brand performance Designed to fit P20200-1.3 tool geometries, this indexable insert allows straightforward retrofitting into compatible milling bodies, enabling rapid changeovers and inventory standardisation. The product benefits from Walter Tools’ focus on precision tooling and stable cutting edges, offering process security for repeat production. For application-specific recommendations or to confirm geometry compatibility with existing toolholders, Metav Werkzeuge provides technical guidance and practical support to ensure the insert matches the machining strategy. Contact Metav Werkzeuge for tailored application guidance and to order genuine Walter Tools inserts: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: P20200-1.3-WKP35S-WALTER Designation: P20200-1.3 WKP35S Product type: Indexable milling insert (Fräswendeschneidplatte) Brand: Walter Tools Facts Chipbreaker: 1.3 Grade/Sort: WKP35S Series: Tiger·tec Silver Materials applicable: P (steel), K (cast iron) Special features Coating: Tiger·tec Silver (coated carbide) Material: coated carbide (WKP35S) Application: milling Compatibility: P20200-1.3 tool geometries Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The insert is suitable for machining steel (P) and cast iron (K); the WKP35S grade and Tiger·tec Silver coating are optimised for these groups. How does the 1.3 chipbreaker affect machining? The 1.3 chipbreaker promotes controlled chip formation and secure evacuation, improving surface finish and reducing the chance of chip-related interruptions during milling. Is the insert compatible with existing P20200-1.3 tool holders? Yes, the P20200-1.3 WKP35S is intended for use with P20200-1.3 geometries and can be integrated where that tool interface is specified. What performance improvements can be expected from the Tiger·tec Silver coating? Tiger·tec Silver enhances wear resistance and thermal stability, resulting in longer tool life and more consistent cutting-edge behaviour across production runs. Can this insert deliver consistent surface quality in production? When combined with the WKP35S grade and correct cutting parameters, the insert supports repeatable surface quality and reliable dimensional control during series machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mention of brand names serves explanatory purposes only and does not indicate any affiliation. The described article is an original, factory-new product from the manufacturer.
P20200-1.4 WKP35S WKP35S Wendeplatten - Walter Tools
High-performance Tiger‑tec Silver coating and the WKP35S grade combine to deliver extended tool life and stable chip control; the 1.4 chipbreaker is optimised for predictable chip formation in steel and cast iron. Order the insert directly via Metav Werkzeuge or consult the technical advisers for application-specific recommendations. P20200-1.4 WKP35S indexable milling insert — Tiger‑tec Silver for steel and cast iron | Walter Tools The P20200-1.4 WKP35S is an indexable milling insert engineered for efficient face and peripheral milling of steel (ISO P) and cast iron (ISO K), offering a balance of wear resistance and reliable cutting behaviour in demanding production environments. Tiger‑tec Silver coating for long tool life WKP35S grade for reliable performance Optimised for steel and cast iron machining 1.4 chipbreaker for controlled chip formation High durability and consistent cutting performance The Tiger‑tec Silver-coated grade delivers enhanced wear resistance and thermal stability, which translates into longer tool life and fewer interruptions for insert changes. The WKP35S composition is a coated carbide specifically tuned to cope with the typical heat and chip characteristics of steel and cast iron; this reduces flank wear and helps preserve cutting-edge geometry over extended runs. By choosing a coated solution, machining programmes gain greater predictability and the need for frequent regrinds is minimised, supporting uninterrupted production and consistent component quality. Predictable chip control and surface finish The integrated 1.4 chipbreaker geometry moulds the chips for controlled evacuation and reduced risk of entanglement, especially when machining ductile steels and abrasive cast irons. Controlled chip formation lowers the probability of workpiece damage and eases swarf management in automated cells. As a result, the cutting process promotes a stable surface finish and reduces secondary handling. The chipbreaker design is particularly helpful where repeatability and shop-floor cleanliness are priorities. Productivity advantages for steel and cast iron applications Designed for the ISO P and K material groups, the insert supports a wide range of steel grades and cast-iron types commonly encountered in production workshops. The combination of a robust grade and an effective coating improves edge stability under fluctuating loads, contributing to higher material removal rates without compromising component accuracy. This balance of process reliability and efficiency can shorten cycle times and lower total machining costs across medium- to high-volume operations. Integration and application guidance for manufacturing workflows Selection of an indexable insert is best aligned with the machine, spindle capability and workholding strategy; the presented grade and chipbreaker simplify this decision by offering versatile performance across common substrates. Technical documentation from the manufacturer explains recommended usage contexts and handling. For process planning, note the benefits of a coated grade in reducing unplanned stoppages and achieving consistent tool-change intervals, which supports more efficient scheduling and less downtime on the shop floor. Contact Metav Werkzeuge for application advice on Walter Tools Tiger‑tec Silver inserts and to secure tailored recommendations for cutting conditions and availability Technical Data SKU: P20200-1.4-WKP35S-WALTER Article designation: P20200-1.4 WKP35S Product type: Indexable milling insert Manufacturer: Walter Tools Grade / series: WKP35S / Tiger‑tec Silver Core data Chipbreaker: 1.4 Special features Coating: Tiger‑tec Silver Grade: WKP35S Suitable for: Steel (P), Cast iron (K) Material designation: P / K FAQ Which materials is this insert suitable for? The P20200-1.4 WKP35S insert from Walter Tools is specified for ISO P (steel) and ISO K (cast iron) applications, making it suitable for a broad range of unalloyed and alloyed steels and typical cast-iron types. What does Tiger‑tec Silver mean for machining? Tiger‑tec Silver denotes a multilayer coating technology that enhances thermal resistance and wear behaviour; in practice, the Tiger‑tec Silver coating on this grade increases service life and supports stable cutting under varying loads. How does the 1.4 chipbreaker improve production? The 1.4 chipbreaker geometry shapes chips for controlled evacuation, lowering the risk of clogging and helping to maintain consistent surface quality during face and peripheral milling. Is this insert recommended for stainless steel? Stainless steel suitability is not specified for this grade; the P20200-1.4 WKP35S is modelled for steel and cast-iron machining according to the provided data. How should this insert be selected for a milling tool assembly? Selection should consider the cutter diameter, helix and axial engagement; the WKP35S grade and the 1.4 chipbreaker offer a versatile starting point for steel and cast-iron programmes, with final parameter selection based on machine capability and workpiece conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group.
P20200-1.5 WKP35S WKP35S Wendeplatten - Walter Tools
Combine the Tiger‑tec Silver coating with the WKP35S grade and a 1.5 chipbreaker to achieve stable chip formation and long tool life in steel and cast iron machining; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. P20200-1.5 / P20200-1.5 WKP35S WKP35S milling insert for steel and cast iron — Walter Tools (Tiger‑tec Silver, chipbreaker 1.5) The P20200-1.5 WKP35S is a Tiger‑tec Silver coated milling insert engineered for productive machining of steel (P) and cast iron (K), combining a robust carbide substrate with a coating system optimised for wear resistance and consistent chip control. Tiger‑tec Silver coated for enhanced wear resistance WKP35S grade for reliable performance in steel Optimised for steel and cast iron machining Chipbreaker 1.5 for controlled chip formation Longer tool life through optimised coating and grade The combination of the Tiger‑tec Silver coating and the WKP35S carbide grade delivers a measurable improvement in wear resistance and edge stability during medium to heavy milling. The coating reduces flank and crater wear under the thermal loads typical for machining steel, while the substrate’s composition supports repeatable cutting-edge performance. For production environments this means fewer insert changes and a more predictable tool‑life profile, contributing directly to machine uptime and lower cost per component. Predictable chip behaviour for smoother machining cycles A clearly defined chipbreaker 1.5 geometry ensures the formation of short, controllable chips when cutting steel and cast iron, reducing the risk of entanglement and improving swarf evacuation. Controlled chip formation helps maintain a steady surface finish and reduces interruptions for chip clearing. In practical terms, the engineered chip control of the insert supports higher material removal rates with less manual intervention and improved process reliability. Easy identification and integration into tool systems The ISO designation P20200-1.5 WKP35S denotes the insert geometry and grade for straightforward identification in tool inventories and ordering systems. The insert fits standard toolholders designed for this geometry, enabling simple replacement without extensive tooling changes. Clear labelling and consistent grade performance assist planners and operators in standardising tool sets across similar machining operations. Application-focused advantages and support options Designed specifically for the ISO material groups P (steel) and K (cast iron), the insert is optimised for the typical heat generation and abrasive wear mechanisms encountered in these materials. Together with the Tiger‑tec Silver technology, this provides a robust solution for workshops seeking both productivity and repeatability. For further process data such as cutting speeds, feeds and recommended depths of cut, Metav Werkzeuge can supply application sheets and consultation to match the insert to the exact machining scenario. Contact Metav Werkzeuge for tailored application advice and to arrange supply of the P20200-1.5 WKP35S insert — Metav Werkzeuge’s consultants are ready to support selection and delivery Technical data Article number: P20200-1.5-WKP35S-WALTER Designation: P20200-1.5 WKP35S Series: Tiger‑tec Silver Grade: WKP35S Chipbreaker: 1.5 Manufacturer: Walter Tools Core data Chipbreaker size: 1.5 Geometry designation: P20200-1.5 Materials & special features Coating: Tiger‑tec Silver Carbide type: coated carbide (WKP35S) Suitable for: Steel (P) Suitable for: Cast iron (K) Product type: Milling indexable insert FAQ What materials is this insert suitable for? The P20200-1.5 WKP35S milling insert is specified for steel (P) and cast iron (K) applications and is optimised for the thermal and abrasive conditions typical of those material groups. How does the Tiger‑tec Silver coating benefit machining? The Tiger‑tec Silver coating on the WKP35S grade reduces wear and improves heat resistance, which helps extend insert life and maintain cutting performance during extended milling cycles. What role does the chipbreaker 1.5 play? The chipbreaker 1.5 geometry promotes short, manageable chips and reliable evacuation, supporting continuous machining and a consistent surface finish when processing steel and cast iron. Can the insert be used in existing toolholders? The ISO designation P20200-1.5 indicates the insert geometry for compatibility with holders designed for that form; the P20200-1.5 WKP35S insert is intended for straightforward replacement in matching tool systems. How can additional technical parameters be obtained? Application‑specific recommendations, including cutting speeds and feeds for the P20200-1.5 WKP35S insert, are available from Metav Werkzeuge on request to ensure optimal integration into the production process. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The article offered is original, factory‑new goods of the manufacturer Walter Tools.
P20200-2.1 WKP35S Wendeplatten - Walter Tools
High-performance Tiger‑tec Silver coating plus the WKP35S grade deliver consistent chip control and reliable wear resistance for demanding milling tasks. The 2.1 chipbreaker ensures predictable chip formation when machining steel and cast iron. Order the insert directly via Metav Werkzeuge or consult our advisors for tailored specifications. P20200-2.1 WKP35S milling indexable insert — Tiger‑tec Silver, Walter Tools The P20200-2.1 WKP35S is a coated carbide milling insert engineered for productive machining of steel (P) and cast iron (K) applications. Tiger‑tec Silver coated carbide Grade WKP35S for steel and cast iron 2.1 chipbreaker for controlled chips Optimised for milling productivity Predictable chip control for stable milling processes The combination of the 2.1 chipbreaker and the coating structure provides reliable chip control, which reduces interruptions and helps maintain stable cutting forces during milling. For production environments where consistent chip evacuation matters, this geometry supports continuous operation and lowers the risk of workpiece damage. The result is improved process stability and fewer unplanned tool changes, which contributes to a smoother workflow and higher machine utilisation. Coating and grade designed to extend tool life The Tiger‑tec Silver coating paired with the WKP35S grade offers enhanced wear resistance under the thermal and mechanical loads typical for steel and cast iron machining. The coated carbide construction balances toughness and hardness to resist abrasive wear while maintaining edge integrity. This combination supports longer indexable insert life and predictable wear progression, making it suitable for milling strategies that prioritise both component quality and production economy. Clear process benefits for productive machining Integration of this insert into established milling cycles provides measurable benefits: more consistent surface quality, fewer tool interventions and more predictable cycle times. The design supports a range of common milling operations, helping to reduce process variation and increase reproducibility. Where productivity and part-to-part consistency are priorities, the insert contributes to a leaner machining process and reduced overall operating costs. Practical application notes for steel and cast iron The grade is specified for the ISO groups P and K, which means suitability for various unalloyed and alloyed steels as well as cast irons. Selection of cutting parameters should follow machine capability and workpiece characteristics; coolant strategy and feed rates play an important role in maximising the insert performance. For precise application or geometry-specific advice, consult cutting data tables or contact technical advisors to align the insert with the intended milling strategy. For tailored specification support or to secure Walter Tools Tiger‑tec Silver WKP35S inserts for production, contact Metav Werkzeuge for expert advice and ordering assistance Technical Data Article number: P20200-2.1-WKP35S-WALTER Designation: P20200-2.1 WKP35S Product type: milling indexable insert Grade: WKP35S Series: Tiger‑tec Silver Chipbreaker: 2.1 Material designation: P / K Manufacturer: Walter Tools Core data Compatible material groups: P (steel), K (cast iron) Coating technology: Tiger‑tec Silver Construction: coated carbide Special features Coated carbide grade for demanding milling Optimised chip control geometry Suited to productive milling strategies Designed for consistent wear behaviour FAQ Which materials is this insert suitable for? The P20200-2.1 WKP35S is specified for ISO groups P and K, meaning it is suitable for machining a wide range of steels and cast irons. What does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating on the WKP35S grade improves wear resistance and thermal stability, contributing to longer tool life and process reliability. How does the 2.1 chipbreaker affect performance? The 2.1 chipbreaker promotes controlled chip formation and evacuation, reducing interruptions and helping to maintain consistent cutting forces during milling. Is this insert recommended for stainless steel machining? No suitability for stainless steel is indicated for the P20200-2.1 WKP35S in the provided data; selection should follow the specified ISO material groups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade designations are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer. The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group.
P20200-2.2 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of the high wear resistance of the Tiger·tec Silver coating, the targeted chip control provided by the 2.2 chipbreaker and the suitability for both steel and cast iron to maintain consistent cycle times and surface quality; order the insert directly via Metav Werkzeuge or consult our technical team for application-specific advice. P20200-2.2 WKP35S milling indexable insert – Tiger·tec Silver coating, for steel & cast iron | Walter Tools The P20200-2.2 WKP35S is a coated carbide milling insert designed for productive machining of steels and cast irons in demanding production environments Tiger·tec Silver coated carbide Optimised for steel and cast iron machining Chipbreaker 2.2 for reliable chip control Walter Tools grade WKP35S for process repeatability Stable cutting performance for productive milling The P20200-2.2 WKP35S insert delivers a predictable combination of wear resistance and edge stability through the Tiger·tec Silver coating technology. This grade is formulated as a coated carbide to withstand the thermal and mechanical loads typical of ISO P (steel) and K (cast iron) groups, translating into longer tool life and fewer insert changes. For production runs where uptime matters, the insert’s balance of toughness and abrasion resistance helps reduce process deviations and supports consistent part quality across batches. Controlled chips and improved surface integrity Equipped with a chipbreaker 2.2, this indexable insert promotes reliable chip control, which reduces interruptions and minimises the risk of re-cutting or workpiece damage. Better chip formation directly contributes to a superior surface finish and simplified chip handling in automated setups. The combination of geometry and coating means feeds and speeds can be stabilised faster, supporting shorter set-up times and a more efficient machining cycle — an advantage in both small-batch and continuous operations. Broad applicability and reliable process security Designed for versatility, the cutting grade is suitable for the prevalent materials in metalworking workshops: steel and cast iron, according to ISO group alignment. The WKP35S grade provides a practical compromise between edge life and toughness, making it an appropriate choice for mixed production environments where material mix and component complexity vary. Backed by the quality standards of Walter Tools, this insert supports reproducible results and contributes to predictable tool-change scheduling, helping to streamline production planning and cost accounting. Contact Metav Werkzeuge for technical consultation, availability and to discuss the best insert options for a specific application; Metav Werkzeuge can advise on parameters suited to the P20200-2.2 WKP35S from Walter Tools Technical Data Article number: P20200-2.2-WKP35S-WALTER SKU: P20200-2.2-WKP35S-WALTER Designation: P20200-2.2 WKP35S Facts Chipbreaker: 2.2 Grade/series: Tiger·tec Silver Material groups: P / K Special features Coating: Tiger·tec Silver Cutting material: coated carbide Manufacturer: Walter Tools Main applications: Steel (ISO P), Cast iron (ISO K) Series: Tiger-tec Silver Grade: WKP35S FAQ What materials is this insert suitable for? The P20200-2.2 WKP35S insert is designed for machining steel (ISO P) and cast iron (ISO K), using the Tiger·tec Silver coating to balance wear resistance and toughness. How does the chipbreaker 2.2 affect machining? Chipbreaker 2.2 on this Walter Tools milling insert improves chip control, reducing recutting and aiding consistent surface quality in both interrupted and continuous cuts. Is this grade appropriate for high-feed milling? The WKP35S grade is formulated for reliable tool life under typical milling loads; application parameters should be validated with Metav Werkzeuge to match feed rates and depths for specific setups. Can the Tiger·tec Silver coating extend tool life? Yes, the Tiger·tec Silver coating increases resistance to abrasive wear and thermal softening, which commonly leads to extended insert life and fewer tool changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P20200-2.3 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, reliable chip control and consistent surface finish for efficient milling operations; order the insert directly via Metav Werkzeuge or consult our technical advisers for application support. P20200-2.3 WKP35S Fräswendeschneidplatte – Tiger·tec Silver, for steel and cast iron | Walter Tools The P20200-2.3 WKP35S is a milling indexable insert engineered for productive roughing and finishing in steel and cast iron applications. Tiger·tec Silver coating for enhanced tool life Optimised for steel and cast iron machining Chipbreaker 2.3 for controlled chip formation Coated carbide grade WKP35S for stable cutting Longer tool life through advanced coating technology The combination of the Tiger·tec Silver coating and the WKP35S grade creates a balanced surface treatment that reduces flank wear and extends tool life during interrupted and continuous cuts. The coating minimises adhesive and abrasive wear mechanisms commonly encountered when machining ISO P (steel) and ISO K (cast iron), which means fewer insert changes and lower tool consumption. For production environments this translates into predictable process windows and reduced downtime, improving overall equipment effectiveness. Consistent chip control for safer, faster machining The chipbreaker 2.3 geometry is designed to promote short, controllable chips when cutting a wide range of steels and cast irons. Controlled chip formation reduces the risk of re-cutting and tool damage, and contributes to stable cutting forces—valuable when machining complex geometries or thin-walled components. The indexable insert’s geometry supports reliable chip evacuation, which helps maintain surface integrity and reduces secondary operations. Productivity gains with a coated carbide construction Manufactured as a coated carbide insert, this grade delivers a reliable balance between toughness and hardness. The result is robust performance under typical milling conditions: acceptable resistance to chipping at interrupted cuts and sufficient hardness for wear resistance at higher cutting speeds. These characteristics make the insert well suited for demanding milling tasks where both tool life and component quality are priorities, offering a measurable contribution to cycle-time reduction. Easy integration into existing toolholders and processes This milling insert is specified as an indexable plate compatible with standard toolholder systems used in face and shoulder milling. Its designation simplifies ordering and tool data management: the ISO-style marking helps production planners and purchasing to match the correct grade and geometry. Integration into existing tool lists and cutting-data libraries is straightforward, allowing rapid adoption without extensive process requalification. Trusted manufacturing and application competence Produced under the Walter Tools brand, the insert benefits from the manufacturer's focus on consistent cutting-edge geometry and process-oriented product families. The Tiger·tec Silver family is developed to provide stable chip formation and good tool life across a broad material range. For companies seeking reproducible machining results and reliable supplier performance, this indexable insert supports process stability and part quality. Contact Metav Werkzeuge for cutting-data sheets, application recommendations or to request sample inserts for trials — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: P20200-2.3-WKP35S-WALTER Designation: P20200-2.3 WKP35S Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Chipbreaker: 2.3 Special features Coated carbide grade WKP35S Suitable for ISO P (steel) and ISO K (cast iron) Optimised for controlled chip formation Indexable milling insert for face and shoulder milling FAQ What materials is this insert designed to machine? The P20200-2.3 WKP35S insert is intended for ISO P (steel) and ISO K (cast iron) applications and is optimised for those material groups. How does the Tiger·tec Silver coating benefit machining? Tiger·tec Silver on the P20200-2.3 WKP35S reduces abrasive and adhesive wear, extending insert life and improving process consistency under typical milling conditions. Which chip behaviour can be expected with the 2.3 chipbreaker? The chipbreaker 2.3 promotes short, controllable chips suitable for efficient evacuation and reduced risk of re-cutting during both roughing and semi-finish passes. Is this insert suitable for interrupted cuts? Yes, the coated carbide construction and the WKP35S grade provide a balanced toughness that handles interrupted cutting conditions commonly found in milling. How should the insert be specified when ordering or planning tooling? Refer to the ISO designation P20200-2.3 WKP35S and the manufacturer Walter Tools when matching the insert to toolholders and cutting data. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer Walter Tools.
P20200-3.1 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, precise chip control (3.1) and wide applicability for steel and cast iron to keep production stable and predictable; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. P20200-3.1 WKP35S – milling indexable insert, Tiger‑tec Silver by Walter Tools A P20200-3.1 WKP35S indexable milling insert engineered to deliver consistent performance in machining steel and cast iron with a Tiger‑tec Silver coated, carbide-based grade. Tiger‑tec Silver coated WKP35S Chipbreaker 3.1 for controlled chip formation Optimised for steel and cast iron machining High wear resistance and consistent edge life Consistent productivity through advanced coating technology The Tiger‑tec Silver technology provides a robust, wear‑resistant surface that extends tool life and keeps process windows wide. By reducing flank and crater wear, the coated grade maintains cutting parameters for longer, which supports higher productivity and fewer unscheduled tool changes. This results in more stable cycle times and improved cost-efficiency in medium‑ to high‑volume milling operations. Controlled chip formation to reduce interruptions The integrated chipbreaker 3.1 is designed to create predictable, short chips when machining both unalloyed and alloyed steels as well as cast iron. Controlled chip formation reduces the risk of chip re-cutting and machine stoppages, improving surface finish and lowering the likelihood of tool or workpiece damage. For operations where cycle reliability matters, this geometry contributes directly to reduced downtime and simplified chip handling. Broad material capability simplifies tooling decisions Classified for ISO groups P (steel) and K (cast iron), the grade suits a wide range of ferrous materials encountered in general engineering and automotive production. The cutting material is a coated carbide composition optimised for the thermal and mechanical demands of these workpiece groups, allowing one insert type to cover multiple applications and reducing inventory complexity for the workshop. Practical designation and integration into existing tooling systems The ISO designation P20200-3.1 WKP35S identifies the insert geometry and chipbreaker combination for easy replacement and ordering. The indexable format allows economical rotation of cutting edges and predictable reconditioning intervals, supporting lean tooling strategies. Where catalogue geometry or holder compatibility is a concern, selecting this insert ensures repeatable cutting behaviour and straightforward integration into common milling cutter bodies. For tailored recommendations on Walter Tools Tiger‑tec Silver inserts and their application in specific machining tasks, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for a technical consultation and fast availability information Technical data Article number: P20200-3.1-WKP35S-WALTER SKU: P20200-3.1-WKP35S-WALTER Designation: P20200-3.1 WKP35S Product type: Milling indexable insert Facts Series: Tiger‑tec Silver Grade: WKP35S Chipbreaker: 3.1 Applicable materials: Steel (P), Cast iron (K) Special features Coated carbide cutting material Optimised for typical steel heat and chip behaviour Suited to abrasive wear conditions of cast iron ISO‑designation for straightforward replacement FAQ What workpiece materials suit this insert best? The P20200-3.1 WKP35S is specified for ISO groups P and K, making the insert appropriate for machining a range of steel grades and cast iron components. How does the chipbreaker 3.1 help in everyday machining? Chipbreaker 3.1 on this Walter Tools insert produces short, controlled chips, improving chip evacuation, surface finish and minimising interruptions during milling operations. Is this insert suitable for high‑speed applications? The Tiger‑tec Silver coating and carbide substrate of the WKP35S support robust performance; final suitability for high‑speed milling depends on cutter body, machine stability and selected cutting data. How is the insert identified for reordering? Order using the ISO designation P20200-3.1 WKP35S or the article number P20200-3.1-WKP35S-WALTER to ensure the correct coated grade and chipbreaker geometry. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany The Walter AG (marketed as Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners. Mention of brand names is for explanation only and does not imply any affiliation between our company and the brand owners. The offered item is an original, factory‑new product of the manufacturer.
P20200-3.2 WKP35S W endeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Silver coating and the WKP35S grade for durable, repeatable performance in steel and cast iron milling; the 3.2 chipbreaker ensures controlled chip formation and stable cutting. Order the original inserts via Metav Werkzeuge or contact our consultants for application guidance. P20200-3.2 WKP35S milling indexable insert (Tiger·tec Silver) by Walter Tools — for steel and cast iron A P20200-3.2 WKP35S milling insert optimised for productive machining of steels and cast irons, combining a coated-carbide substrate with a chipbreaker designed for reliable chip control Tiger·tec Silver coating for enhanced wear resistance WKP35S grade — coated carbide for stable cutting edges 3.2 chipbreaker for consistent chip formation Designed for milling in steel and cast iron Durable coating and grade for extended tool life The insert benefits from the Tiger·tec Silver coating technology and the WKP35S coated-carbide grade, a combination engineered to resist abrasive and adhesive wear during heavy milling. This results in a stable cutting edge over longer tool life, reducing the frequency of index changes and unplanned stoppages. For production environments where repeatability is crucial, the coating-layer architecture improves thermal stability and supports consistent surface finishes on workpieces made from common alloyed and unalloyed steel grades. Controlled chip flow for safer, faster machining With a 3.2 chipbreaker, the geometry of the insert actively shapes and breaks chips typical for the ISO groups P (steel) and K (cast iron). The controlled chip formation reduces the risk of entanglement and minimises vibration, which supports higher material removal rates and more predictable cycle times. The insert’s chip management characteristics are particularly beneficial in semi-roughing operations where stable evacuation of chips contributes directly to surface quality and tool life. Geometry and designation that simplify process planning The P20200-3.2 form factor indicates a standard milling insert geometry that integrates into established cutter bodies accepting this family of inserts. The combination of insert geometry and WKP35S grade delivers a balance between toughness and hardness suitable for a wide range of milling tasks, from moderate roughing to general finishing in ferrous materials. Process planners will appreciate the reduced need for multiple tool families: one well-chosen insert can cover several operating windows, simplifying tool inventory and setup. Practical advantages for workshop productivity Using this insert supports efficient shopfloor routines: fewer changeovers, predictable wear behaviour and reliable edge integrity translate into lower downtime and fewer scrapped parts. The coated carbide structure and optimised chipbreaker work together to maintain cutting stability, helping maintain component tolerances and surface condition. For teams aiming to improve throughput without adding complexity, the insert offers a straightforward route to consistent, measurable improvements in daily machining output. Contact Metav Werkzeuge for tailored application advice and to secure original Walter Tools P20200-3.2 WKP35S milling inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: P20200-3.2-WKP35S-WALTER Designation: P20200-3.2 WKP35S Product type: milling indexable insert Manufacturer: Walter Tools Numbers / Core technical data Chipbreaker: 3.2 Material groups: P (steel), K (cast iron) Grade: WKP35S Special features / Versions Series: Tiger·tec Silver Material of insert: coated carbide (beschichtetes Hartmetall) Optimised for stable chip formation and broad material coverage FAQ What materials is this insert suitable for? The P20200-3.2 WKP35S insert is designed for ISO groups P and K, meaning it is suitable for machining various types of steel and cast iron. What does the WKP35S grade offer? The WKP35S grade is a coated-carbide grade within the Tiger·tec Silver family; it provides a balance of wear resistance and edge stability suited for demanding milling of ferrous materials. How does the 3.2 chipbreaker affect machining? The 3.2 chipbreaker controls chip shape and evacuation for safer, more consistent machining in both steel and cast iron applications, reducing the likelihood of chip-related interruptions. Is the insert compatible with standard cutter bodies for P20200 geometry? The insert follows the P20200-3.2 designation, which corresponds to common milling insert geometries; compatibility should be confirmed against the specific cutter body seat and clamping system. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is part of the Walter AG group and is one of the world’s leading manufacturers of precision metalcutting tools. Protected trademarks and brand names remain the property of their respective owners. Brand names and registered trademarks are used solely for explanation. There is no affiliation between our company and the mentioned brands. The offered item is an original, brand-new product from the manufacturer.
P20200-3.3 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger·tec Silver coating, precise WKP35S grade geometry and controlled chip formation for consistent, productive milling of steel and cast iron. Order directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. P20200-3.3 WKP35S milling indexable insert – Tiger·tec Silver coating, for steel & cast iron | Walter Tools The P20200-3.3 WKP35S is a coated carbide milling insert engineered for efficient roughing and finishing operations in steel and cast iron, delivering stable cutting behaviour and reproducible results across production runs. Tiger·tec Silver coating for extended tool life WKP35S grade for stable chip formation Chipbreaker 3.3 for controlled chips Suited for machining steel and cast iron Consistent metal removal through advanced coating and grade The combination of Tiger·tec Silver coating and the WKP35S carbide grade provides a measurable increase in tool life and process reliability. This coating system is optimised to reduce abrasive wear and to maintain a stable cutting edge under the thermal and mechanical stresses typical when machining steel. For operations where repeatability matters, the improved wear resistance translates into fewer tool changes and a higher effective machine uptime, which supports a lower cost per component in series production. Better chip control for fewer interruptions and improved finishes The integrated chipbreaker 3.3 is designed to produce short, predictable chips when machining cast iron and steel, reducing the risk of entanglement and machine stoppages. Controlled chip formation also contributes to a more uniform tool load and a more consistent surface finish, which can reduce downstream rework. In practical terms, this means less manual clearance of chips, reduced cycle variability and a smoother transition between roughing and semi-finishing passes. Easy integration into milling systems and clear application scope The insert’s ISO designation and form factor make it straightforward to integrate into common face and shoulder milling cutters used in industrial settings. As a coated carbide insert intended for ISO groups P and K, it suits mixed production environments where both steel and cast iron components are manufactured. The technical clarity of the grade and series supports straightforward tool selection and inventory management, simplifying procurement and spare-part logistics for manufacturing planners and production engineers. For reliable, production-ready milling performance from Walter Tools’ Tiger·tec Silver line, contact Metav Werkzeuge for tailored advice and procurement: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: P20200-3.3-WKP35S-WALTER ISO designation: P20200-3.3 WKP35S Series: Tiger·tec Silver Facts Chipbreaker: 3.3 Grade: WKP35S Material group: P / K Special features Coating technology: Tiger·tec Silver Material: coated carbide Suitable for: steel (P), cast iron (K) FAQ What materials is this insert suitable for? The P20200-3.3 WKP35S milling indexable insert from Walter Tools is optimised for steel (ISO group P) and cast iron (ISO group K), matching the typical wear and chip behaviour of those material families. What advantages does the Tiger·tec Silver series provide? Tiger·tec Silver offers enhanced wear resistance and thermal stability, which supports longer tool life and more consistent cutting edge performance when using the P20200-3.3 WKP35S insert. How does the chipbreaker 3.3 improve production? Chipbreaker 3.3 creates short, controlled chips that reduce entanglement and machine interruptions, improving the stability of milling cycles and enabling a better surface finish with fewer secondary operations. Can the insert be used across different milling cutters? Yes; the ISO designation and standard insert geometry allow the P20200-3.3 WKP35S to be mounted in compatible milling cutter bodies commonly used in industrial machining centres. Why is the ISO designation important for tooling planners? The ISO designation P20200-3.3 WKP35S provides clear information on geometry, grade and intended application, simplifying tool selection, inventory control and ensuring consistent process documentation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; Protected trademarks and trade names are the property of their respective owners. Brand names such as Walter Tools are cited for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product from the manufacturer.
P26300-06005-D61 WSM37G WSM37G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the WSM37G grade for robust machining of demanding alloys; this reduces downtime through stable chip formation and extended edge life. Order the insert directly via Metav Werkzeuge or consult their specialists for specification advice. P26300-06005-D61 WSM37G Thread-cutting insert — Tiger·tec Gold for rostfreier Stahl and superalloys | Walter Tools P26300-06005-D61 WSM37G is a precision threading insert engineered for high-demand applications in rostfreier Stahl and heat‑resistant superalloys, offering a coated carbide grade optimised for stable cutting and reliable chip control High-performance Tiger·tec Gold coating Optimised chip control for tough alloys High edge stability for prolonged life Suitable for rostfreier Stahl and superalloys Consistent cutting performance where heat and toughness matter The WSM37G grade, applied to the P26300-06005-D61 geometry, combines a coated carbide substrate with Tiger·tec Gold technology to maintain cutting-edge integrity in short‑chipping and adhesive-prone materials. For components made of rostfreier Stahl or nickel‑based alloys, the coating promotes secure chip formation and reduces the tendency to build up material on the cutting edge. This translates into fewer interruptions for tool changes, predictable cycle times and a measurable improvement in process stability for series production. Longer tool life and reliable surface quality Designed to deliver edge stability, this insert reduces flank wear and helps preserve the cutting geometry over longer runs. The result is a more constant surface finish and reduced rework. The combination of grade and geometry aims to lower the frequency of index changes, which supports higher overall equipment effectiveness. For production environments that demand repeatable results, the insert’s wear resistance contributes directly to productivity and fewer scrap parts. Practical application guidance for productive threading When applied in a suitable indexable holder, the insert offers controlled chip evacuation thanks to the 06005-D61 chipbreaker form, which is particularly effective with sticky or heat‑prone materials. The insert is intended for conventional and CNC lathes where threading demands both precision and durability. Process engineers benefit from its predictable behaviour: consistent engagement, manageable heat generation and a cutting action tuned to the mechanical characteristics of rostfreier Stahl and titanium‑group alloys. Why this insert supports a stable production flow Choosing this Walter Tools insert supports a production strategy focused on uptime and quality assurance. The coated grade and robust chip management reduce unexpected tool failures and contribute to a safer machining window when cutting difficult-to-machine materials. For workshops seeking a balance of productivity and repeatable accuracy, the insert helps to stabilise process parameters and deliver the component tolerances required for modern assemblies. For application-specific advice or to specify the P26300-06005-D61 WSM37G threading insert for rostfreier Stahl and superalloy workpieces, contact Metav Werkzeuge for expert guidance: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: P26300-06005-D61-WSM37G-WALTER Item designation: P26300-06005-D61 WSM37G Manufacturer: Walter Tools Product type: Thread-cutting insert Facts Chipbreaker: 06005-D61 Grade: WSM37G Series: Tiger·tec Gold Material groups: S / M Special features Coated carbide grade (Tiger·tec Gold) Suitable for rostfreier Stahl machining Suitable for heat‑resistant superalloys and titanium Optimised chip control and stable edge life Designed for indexable holder systems FAQ What materials is this insert suitable for? The P26300-06005-D61 WSM37G threading insert is specified for rostfreier Stahl and heat‑resistant superalloys (material groups M and S), with a geometry and coating tuned for secure chip formation. Is this insert intended for high-production environments? Yes, the Tiger·tec Gold grade and the insert’s chipbreaker design are aimed at maintaining edge stability and reducing the need for frequent indexing in series production. How does the WSM37G grade improve process reliability? WSM37G combines a coated carbide substrate with heat- and wear-resistant properties that support predictable cutting behaviour, which helps to avoid premature edge failure and variability in component quality. Can this insert be used for titanium alloys? Depending on the component geometry and machining setup, the grade supports machining of titanium and similar heat‑resistant alloys; application parameters should be checked against machine and holder capabilities. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P26300-06005-D67 WSM37G WSM37G Wendeplatten - Walter Tools
Take advantage of the combination of a wear-resistant Tiger·tec Gold coating, a WSM37G carbide grade tailored for stainless steels and superalloys, and the 06005‑D67 chipbreaker for secure chip formation and repeatable thread quality; order or request application advice via Metav Werkzeuge if further consultation is required. P26300-06005-D67 WSM37G Thread Cutting Insert — Tiger·tec Gold, Walter Tools A P26300-06005-D67 WSM37G thread cutting insert designed for reliable machining of stainless steels and heat‑resistant superalloys in demanding production environments Tiger·tec Gold coating for high wear resistance WSM37G grade for stainless and superalloys 06005‑D67 chipbreaker for reliable chip control Consistent thread quality in demanding materials The Tiger·tec Gold WSM37G grade is optimised for machining stainless steels (ISO group M) and heat‑resistant superalloys and titanium alloys (ISO group S). Its coated carbide composition balances toughness and heat resistance to reduce build‑up at the cutting edge, which directly improves thread form accuracy and surface finish. Explaining the ISO groups: M indicates materials prone to work hardening and high heat generation, while S denotes materials with poor thermal conductivity that stress the cutting edge; the chosen grade addresses both by supporting stable chip formation and edge integrity. Coating and geometry that extend tool life The combination of Tiger·tec Gold surface technology and the 06005‑D67 chipbreaker geometry reduces flank wear and improves heat management during the threading process. The chipbreaker is engineered to control chip flow and break long, stringy chips into manageable fragments, lowering the risk of surface damage and machine stoppages. This results in extended tool life and more predictable tool replacement intervals, supporting uninterrupted productivity and reduced tooling costs per manufactured part. Process reliability and practical application guidance Applied in appropriate holders and under controlled cutting parameters, the insert delivers repeatable results across series production. The geometry supports secure seating in common thread toolholders and contributes to consistent pitch fidelity and profile accuracy. For integration, select axial and radial feed values consistent with the workpiece material and thread form; modest adjustments to cutting speed often yield immediate improvements in surface finish and tool life. For tailored parameter sets or material‑specific recommendations, Metav Werkzeuge provides application support and process consultation. For application advice or to arrange supply of the Walter Tools Tiger·tec Gold WSM37G thread cutting insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for fast, practice‑oriented assistance. Technical Data Article number: P26300-06005-D67-WSM37G-WALTER ISO designation: P26300-06005-D67 WSM37G Product type: Gewindeschneidplatte (thread cutting insert) Data Material group: S / M Chipbreaker: 06005-D67 Series: Tiger·tec Gold Special features Grade: WSM37G (coated carbide) Suitable for stainless steels and heat‑resistant superalloys Application: thread cutting insert FAQ What materials is this insert suitable for? The P26300-06005-D67 WSM37G insert is designed for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering stable cutting behaviour in these demanding materials. How does the 06005‑D67 chipbreaker improve machining? The 06005‑D67 chipbreaker on the Walter Tools insert controls chip flow and promotes fragmentation, which reduces surface damage risk and facilitates safe chip evacuation during threading operations. What is the benefit of the Tiger·tec Gold coating? The Tiger·tec Gold coating provides enhanced wear resistance and thermal protection for the cutting edge, contributing to longer tool life and more consistent thread quality with reduced flank wear. Is this insert compatible with standard thread toolholders? The geometry of the insert is intended for common thread cutting holders; correct seating and clamping are essential for achieving the stated performance and dimensional repeatability. Can the insert be used for high‑temperature alloy threading? Yes, the WSM37G grade is formulated for heat‑resistant alloys and titanium, delivering improved edge stability under thermal load compared with general‑purpose grades. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; info@walter-tools.com Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, brand‑new product from the manufacturer.
P26300-0601-D61 WSM37G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WSM37G grade for a combination of reliable edge stability and secure chip formation when machining stainless steel and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult the advisors for process optimisation. P26300-0601-D61 WSM37G – Threading insert with Tiger·tec Gold coating, Walter Tools The P26300-0601-D61 WSM37G is a threading insert engineered for secure chip control and consistent edge life when machining stainless steel and heat‑resistant superalloys in demanding turning applications Tiger·tec Gold coating for high wear resistance WSM37G grade for stainless steel and superalloys Optimised 0601‑D61 chipbreaker for secure chip control Walter Tools quality for consistent edge stability Longer tool life thanks to coating and grade The combination of the Tiger·tec Gold coating and the WSM37G grade offers enhanced heat resistance and wear protection, which translates into a longer effective tool life and fewer index changes. Coated carbide substrates reduce flank wear and support a stable cutting edge, critical when machining materials that tend to work‑harden or generate high temperatures. For production environments this means fewer interruptions and improved process consistency, particularly when turning threads in stainless steel or other ISO group M components. Predictable chip control and improved thread quality The 0601‑D61 chipbreaker geometry is optimised to produce short, controllable chips and to guide material flow away from the cutting zone. That controlled chip formation reduces the risk of built‑up edge and helps maintain thread form accuracy, which is especially important on ductile materials and heat‑resistant alloys. Explaining the term: a chipbreaker is a machined relief or contour on the insert that modifies how the chip curls and breaks; an effective design reduces downtime and protects the workpiece surface finish. Practical application guidance and compatibility This threading insert is suitable for heavy‑duty machining tasks and, depending on insert geometry, for stainless steel and high‑temperature nickel and cobalt alloys (ISO groups M and S). When selecting an indexable insert for thread turning operations, the combination of grade and chipbreaker determines both wear behaviour and surface outcome. For process planning, pair the insert with stable toolholders and ensure appropriate cutting parameters for the chosen material group to exploit the WSM37G performance fully. For further technical details or cutting data, Metav Werkzeuge provides advisory support to align tool choice with production goals. Contact Metav Werkzeuge today to discuss suitability of the Tiger·tec Gold P26300-0601-D61 WSM37G threading insert for stainless steel and superalloys — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: P26300-0601-D61-WSM37G-WALTER Article designation: P26300-0601-D61 WSM37G Type: Threading insert Grade: WSM37G Series: Tiger·tec Gold Chipbreaker: 0601‑D61 Material class: S / M Manufacturer: Walter Tools UID: P26300-0601-D61-WSM37G-WALTER Facts ISO material groups: M, S Chipbreaker code: 0601‑D61 Material class designation: S / M Special features Coating: Tiger·tec Gold Substrate: coated carbide Application: stainless steel and heat‑resistant superalloys Design: thread‑cutting insert Benefit: optimised chip control and edge stability FAQ Which materials can be machined with this insert? The insert is designed for machining stainless steel and heat‑resistant superalloys (ISO groups M and S); the WSM37G grade supports secure chip formation in these materials. What does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating increases heat resistance and reduces flank wear, resulting in longer tool life and more consistent thread quality when using the P26300‑0601‑D61 WSM37G insert. How does the 0601‑D61 chipbreaker affect machining? The 0601‑D61 chipbreaker promotes short, manageable chips and guides chip flow away from the cutting zone, improving surface finish and reducing the risk of built‑up edge during thread turning. Is this insert suitable for high‑speed machining? The coated grade and robust chipbreaker are suitable for elevated cutting conditions typical of challenging materials, but optimal speeds depend on machine rigidity, toolholder choice and the specific workpiece alloy. Manufacturer: Walter Tools (Walter AG), Tübingen, Germany
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com