P26300-0601-D67 WSM37G WSM37G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WSM37G grade for secure cutting-edge stability in demanding thread turning operations; the combination of wear-resistant coated carbide and an optimised chipformer ensures consistent productivity and reduced rework. Order the insert directly via Metav Werkzeuge or contact our consultants for application-specific advice. P26300-0601-D67 WSM37G thread cutting insert — Tiger·tec Gold by Walter Tools The P26300-0601-D67 WSM37G is a thread cutting insert engineered for high-demand applications in rostfreier Stahl and heat-resistant superalloys, combining a robust coating with optimised chip control Tiger·tec Gold coating for edge stability Suited for rostfreier Stahl and superalloys Coated carbide for enhanced wear resistance Optimised chip control for secure chipbreaking Consistent edge life from advanced coating technology The Tiger·tec Gold series delivers a balanced coating system that increases thermal resistance and adhesion to the substrate. By using a coated carbide body and a modern coating stack, the insert achieves a stable cutting edge under high thermal load, which reduces flank wear and helps maintain thread form over long production runs. For thread turning where heat generation is significant, this results in fewer changeovers and more predictable tool life. Reliable performance on rostfreier Stahl and heat-resistant alloys Designed for ISO groups M and S, this geometry and grade address the specific challenges of machining rostfreier Stahl and superalloys: material toughness, tendency to work-harden, and poor thermal conductivity. The WSM37G grade is formulated to support secure chip formation and minimise built-up edge, enabling accurate thread profiles and repeatable dimensional results even on difficult materials. The result is reduced machining risk and improved first-pass yield. Better process control through optimised chip formation An optimised chipformer and chipbreaking geometry aid controlled chip flow and evacuation, lowering the risk of chip entanglement and surface damage. With consistent chip control, cycle times are stabilised and interruption due to chip-related faults is minimised. The combination of geometry and Tiger·tec Gold surface treatment contributes directly to process security, making the insert a pragmatic choice for production environments requiring predictable throughput. Practical application guidance and integration The insert fits industry-standard toolholders for thread turning; selection of the correct geometry and coolant strategy depends on the workpiece material and machine dynamics. For operations in rostfreier Stahl, moderate cutting speeds with stable feed and controlled coolant application are recommended to exploit the coating and grade characteristics fully. For high-temperature alloys, prioritise steady cutting parameters to preserve the stable cutting edge and extend tool life. For further assistance with holder compatibility or parameter settings, technical consultation is available. For reliable thread turning in rostfreier Stahl and superalloys, contact Metav Werkzeuge for tailored recommendations on the Tiger·tec Gold WSM37G inserts and to determine the optimal insert geometry for the application. Technical Data Article number: P26300-0601-D67-WSM37G-WALTER Designation: P26300-0601-D67 Full designation: P26300-0601-D67 WSM37G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSM37G Chipbreaker: 0601-D67 Product type: thread cutting insert Material group: S / M Core data Grade designation: WSM37G Chipbreaker code: 0601-D67 Series name: Tiger·tec Gold Special features Coated carbide (coated hardmetal) Optimised chipformer for thread cutting Suited for rostfreier Stahl (ISO M) and heat-resistant superalloys/titanium (ISO S) Engineered for secure chip control and stable cutting edge Insert suitable for production thread turning applications FAQ What materials is this insert suitable for? The WSM37G grade is intended for machining rostfreier Stahl and heat-resistant superalloys (ISO groups M and S), offering thermal and edge stability for these demanding materials. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on this insert improves heat resistance and wear behaviour, which translates into longer, more predictable tool life and consistent thread quality under thermal load. Is the P26300-0601-D67 WSM37G compatible with standard thread turning holders? Yes, the insert designation P26300-0601-D67 corresponds to common industry geometries and mounts in standard thread turning toolholders; holder selection should match the required thread form. Can this insert reduce cycle times compared with uncoated grades? The combination of coated carbide and optimised chip control in the WSM37G grade supports stable cutting conditions that can enable higher productivity and fewer interruptions, potentially reducing overall cycle times. Manufacturer: Walter Tools Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P26300-0602-D61 WSM37G WSM37G Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, optimised chip control and durable coating for efficient thread manufacture; order directly via Metav Werkzeuge or consult our advisors for grade selection. P26300-0602-D61 WSM37G Threading Insert — Tiger·tec Gold, Walter Tools A P26300-0602-D61 WSM37G threading insert designed for secure chip formation and long life when machining stainless steels and heat‑resistant superalloys Tiger·tec Gold coated substrate Optimised for stainless and superalloys Stable cutting edge for extended tool life 0602‑D61 chipbreaker geometry Reliable thread turning in demanding materials The Tiger·tec Gold coating together with the WSM37G grade delivers a combination of thermal resistance and flank stability that benefits thread production in tough materials. The coated carbide substrate reduces adhesive wear and supports a consistent cutting action, which translates into fewer interrupted cycles and less rework. For manufacturers working with stainless steels or nickel‑based alloys, this results in improved process stability and a predictable surface finish on internal and external threads. Predictable chip control for smoother production A clearly defined chipbreaker geometry (0602‑D61) ensures chip control is repeatable across batch runs, lowering the risk of chip entanglement and machine stoppages. The geometry is tuned to thread profiles and feeds typical for turning operations, enabling steady evacuation even under high thermal load. This contributes to higher effective uptime and reduces the need for frequent operator intervention, so production lines remain consistent and efficient. Durable edge and consistent dimensional accuracy The substrate and edge treatment promote a stable cutting edge that resists flank wear during extended cycles. Edge integrity supports repeated thread cuts with minimal variance, so less inspection and fewer rejects occur. By maintaining a reliable edge, the insert helps to protect thread form tolerances, supporting assembly fit and reducing downstream quality costs. The result is a tangible contribution to throughput and component reliability. Practical application and process advice In practice, select a toolholder and cutting data that match the insert geometry to exploit the coated carbide performance fully. The grade is suited to applications where heat generation and material toughness are primary challenges; slower finishing passes or optimised coolant application can further extend tool life. For machining sectors handling corrosion‑resistant components and high‑temperature alloys, the design offers a balance of productivity and surface integrity that supports repeatable manufacturing outcomes. For recommendations on integration and grade choice for Walter Tools Tiger·tec Gold threading inserts, contact Metav Werkzeuge; our consultants provide technical advice and material‑specific cutting data at info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: P26300-0602-D61-WSM37G-WALTER Designation: P26300-0602-D61 WSM37G Series: Tiger‑tec Gold Manufacturer: Walter Tools Product type: Threading insert Core Data Chipbreaker: 0602‑D61 Grade: WSM37G Material group suitability: S / M SKU / UID: P26300-0602-D61-WSM37G-WALTER Features / Applications Coating technology: Tiger·tec Gold (coated carbide) Suitable for machining stainless steels and heat‑resistant superalloys Optimised for secure chip formation and edge stability Designed for productive thread turning and consistent dimensional results FAQ What materials is this threading insert suitable for? The P26300-0602-D61 WSM37G threading insert is suitable for stainless steels and heat‑resistant superalloys (ISO groups M and S) thanks to the Tiger·tec Gold coating and the WSM37G grade. How does the 0602‑D61 chipbreaker help in production? The 0602‑D61 chipbreaker geometry provides controlled chip separation and evacuation during thread turning, improving cycle reliability and reducing the likelihood of chip‑related interruptions. Can this insert be used for both internal and external threads? Yes, the design and grade of this threading insert allow it to be used for internal and external thread applications where material toughness and heat are key factors. What performance benefits does the Tiger·tec Gold series provide? Tiger·tec Gold coating enhances thermal resistance and wear performance, delivering longer tool life and more consistent cutting behaviour in demanding materials. Is the WSM37G grade suitable for titanium alloys? The WSM37G grade is optimised for heat‑resistant alloys and offers good edge stability; suitability for titanium should be evaluated against the specific alloy and machining conditions. Protected trademarks and trade names are the property of their respective owners. The mentioned brand is included for identification purposes only. There is no affiliation between our company and the named manufacturers. The offered item is original, factory‑new merchandise from the manufacturer. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
P26300-0602-D67 WSM37G WSM37G Wendeplatten - Walter Tools
Combining Tiger·tec Gold coating and the WSM37G grade, this threading insert delivers stable chip formation and extended edge life for demanding turning operations; order the P26300-0602-D67 WSM37G directly via Metav Werkzeuge or consult our technical advisors for application support. P26300-0602-D67 WSM37G threading insert — Walter Tools (Tiger·tec Gold, 0602-D67) The P26300-0602-D67 WSM37G is a compact threading insert engineered for heavy-duty machining of rostfreier Stahl and heat-resistant alloys, offering optimised chip control and reliable performance in production environments Threading insert for heavy-duty materials Tiger·tec Gold coated grade WSM37G Optimised 0602-D67 chipbreaker geometry Suitable for rostfreier Stahl and superalloys High-performance cutting for demanding materials The combination of Tiger·tec Gold coating and the WSM37G grade provides a thermally robust cutting edge designed for continuous performance when machining rostfreier Stahl and heat-resistant superalloys. The grade is a coated carbide developed to resist high temperatures and adhesive wear; this stabilises the cutting edge and reduces the risk of built-up edge, which otherwise compromises thread quality. For production engineers seeking predictable tool life, the coated grade supports consistent results in medium to heavy feeds and interrupted cuts, translating into fewer tool changes and higher uptimes. Consistent chip control reduces downtime and scrap The 0602-D67 chipbreaker geometry is tuned for controlled chip formation during threading cycles, promoting predictable breakage and evacuation. Stable chips mean fewer machine stoppages and reduced rework, which directly improves process efficiency. By combining a heat-resistant coating with an optimised chipbreaker, the insert lowers cutting forces and improves surface integrity of the thread flank. The technical design thereby offers a cost-effective route to higher productivity through extended tool life and improved part quality without extensive process tweaking. Practical integration and application benefits for workshop use As a specialised threading solution from Walter Tools, this insert is suitable for a range of industrial turning applications where material toughness and heat build-up are challenges. The insert’s compatibility with common toolholders and established threading routines simplifies adoption on existing lathes. For buyers and workshop planners, the clear material classification (S / M) and the Tiger·tec Gold series make grade selection straightforward; the result is a balanced mix of wear resistance and edge robustness that supports repeatable thread profiles in series production. For demanding threading applications, request the P26300-0602-D67 WSM37G from Metav Werkzeuge and discuss machining parameters with our specialists to ensure optimal integration into the production process Technical data Article number: P26300-0602-D67-WSM37G-WALTER Designation: P26300-0602-D67 WSM37G Product type: Gewindeschneidplatte Core specifications Material groups: S / M Chipbreaker: 0602-D67 Series: Tiger·tec Gold Special features Coating: Tiger·tec Gold (coated carbide) Grade: WSM37G Applications: rostfreier Stahl; heat-resistant superalloys and titanium Geometry: threading insert FAQ Which materials can this insert machine effectively? The P26300-0602-D67 WSM37G insert is formulated for rostfreier Stahl (ISO group M) and heat-resistant superalloys or titanium (ISO group S), offering thermal stability and controlled wear for these challenging materials. What does the grade WSM37G indicate? WSM37G denotes a Walter Tools cutting grade within the Tiger·tec Gold family; it is a coated carbide grade optimised for thermal resistance and reliable edge stability in heavy-duty turning and threading. How does the 0602-D67 chipbreaker improve threading? The 0602-D67 chipbreaker promotes predictable chip separation and evacuation during threading, reducing the chance of chip interference and helping to maintain consistent thread form and surface finish. Is the insert compatible with standard threading holders? Yes, the P26300-0602-D67 WSM37G is a standard-format threading insert designed for integration with common threading toolholders used in industrial turning operations. What advantages does the Tiger·tec Gold series provide? The Tiger·tec Gold series combines advanced coatings with robust carbide grades to increase wear resistance and process security, supporting longer tool life and consistent machining results. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mention of brand names serves explanatory purposes only and does not imply any affiliation between our company and the trademark owners. The offered article is an original, factory-new product of the manufacturer.
P26300-09005-D61 WSM37G WSM37G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WSM37G grade for secure chip formation and extended edge life when machining stainless steels and heat-resistant alloys; order the P26300-09005-D61 insert via Metav Werkzeuge or consult our technical team for application-specific recommendations. P26300-09005-D61 WSM37G — Thread-cutting insert for stainless steels and superalloys by Walter Tools P26300-09005-D61 WSM37G is a dedicated thread-cutting insert engineered for demanding materials, combining a Tiger·tec Gold coating with a carbide substrate for high thermal stability and predictable tool life Tiger·tec Gold coating for heat resistance WSM37G grade for tough materials Designed for stainless steels and superalloys Chipbreaker code 09005-D61 for controlled chips High-performance grade that extends productive machining The WSM37G grade from Walter Tools pairs a coated carbide substrate with the Tiger·tec Gold technology to deliver improved thermal resistance and edge stability. This combination reduces wear rates in high-temperature cutting, which translates into fewer insert changes and longer uninterrupted machining cycles. For operations involving thread turning in stainless steels (ISO group M) or heat-resistant alloys and titanium (ISO group S), the coated grade supports steady cutting conditions and helps avoid common issues such as built-up edge and premature flank wear. The result is a measurable improvement in process efficiency and part consistency. Stable chip control and improved surface quality for critical threads The dedicated chipbreaker identified by code 09005-D61 promotes predictable chip formation during thread production, lowering the risk of chip-related interruptions. Predictable chips assist in maintaining a clean thread profile and contribute to a consistent surface finish, which is critical for mating parts and assembly applications. Conforming to material classifications under ISO 513, the insert’s geometry and grade are optimised for the challenging cut characteristics of stainless steels and superalloys, where poor thermal conductivity and work-hardening tendencies demand robust cutting behaviour. Practical integration and application advice for workshop use The insert P26300-09005-D61 is supplied as part of the Tiger·tec Gold series and is suitable where durable, coated carbide grades are required for thread cutting in difficult-to-machine materials. The specification emphasises long tool life and repeatable performance, supporting stable production runs and simplified tool management. For selection of the correct holder, pitch and geometry for a particular thread form, contact the distributor or refer to tooling charts; matching the insert geometry to the machine and workpiece reduces the number of trials and accelerates set-up times. For supplemental technical parameters or advice on process windows, our technical team is available to support machining trials and parameter optimisation. Contact Metav Werkzeuge today for application-specific recommendations on the Walter Tools P26300-09005-D61 WSM37G insert or to request availability and delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: P26300-09005-D61-WSM37G-WALTER Designation: P26300-09005-D61 WSM37G Product type: Thread-cutting insert Core data Series: Tiger·tec Gold Grade: WSM37G Chipbreaker: 09005-D61 Material suitability: S / M Special features Coated carbide grade Optimised for stainless steels (M) and superalloys/titanium (S) Engineered for stable chip formation and edge life FAQ Which materials can this insert machine effectively? The P26300-09005-D61 WSM37G insert is designed for stainless steels (ISO group M) and for heat-resistant superalloys and titanium (ISO group S), providing stable cutting in materials that demand thermal resistance and edge strength. What does the WSM37G designation indicate? WSM37G denotes a Walter Tools cutting grade within the Tiger·tec Gold technology family; it is a coated carbide grade selected for heat resistance and reliable wear behaviour in demanding materials. How does the Tiger·tec Gold coating help in threading operations? The Tiger·tec Gold coating increases thermal stability and reduces adhesive wear on the cutting edge, improving tool life and maintaining consistent thread quality during extended runs. Is the chipbreaker 09005-D61 suitable for fine-pitch threads? The chipbreaker coded 09005-D61 is specified for controlled chip formation in thread cutting; selection for a specific pitch should consider the thread form and machine chip evacuation requirements. Where can detailed application data or cutting parameters be obtained? Application-specific cutting data and recommendations for the P26300-09005-D61 WSM37G insert are available from Metav Werkzeuge and the Walter Tools technical literature for the Tiger·tec Gold series. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only and do not imply any connection between our company and the named brands. The offered item is original, brand-new goods from the manufacturer Walter Tools.
P26300-09005-D67 WSM37G WSM37G Wendeplatten - Walter Tools
Take advantage of the combination of a coated carbide grade, a 09005‑D67 chipbreaker geometry and the Tiger‑tec Gold series to secure stable thread quality and extended tool life; order the threading insert directly via Metav Werkzeuge or ask our consultants for application support. P26300-09005-D67 WSM37G Threading insert — Tiger‑tec Gold, for stainless steels & superalloys (Walter Tools) The P26300-09005-D67 WSM37G is a coated carbide threading insert from the Tiger‑tec Gold series, designed for reliable thread cutting in stainless steels and heat‑resistant superalloys. Tiger·tec Gold coating for enhanced wear resistance WSM37G grade for difficult‑to‑machine alloys 09005‑D67 chipbreaker for controlled chip formation Optimised for stainless steels and superalloys High wear resistance for longer productive runtimes The Tiger‑tec Gold technology combines a robust coating with a tough substrate to deliver sustained performance under thermally demanding conditions. The WSM37G grade is a coated carbide designed to reduce flank wear and maintain a stable cutting edge when machining materials that typically cause built up edge and rapid tool degradation. This results in fewer indexings, steadier cycle times and improved component repeatability without sacrificing surface finish. Consistent chip control and superior thread quality Thread cutting in austenitic stainless steels or superalloys places high demands on chip evacuation and heat management. The integrated 09005‑D67 chipbreaker geometry supports predictable chip formation, reducing the risk of entanglement and improving centring during thread engagement. By focusing on chip control and geometry‑driven stability, the insert produces more consistent thread flank profiles and lowers scrap rates in serial production. Process security and application versatility The insert is intended for use where process reliability and tool life are priorities. Combined with appropriate cutting data, the grade’s thermal stability and edge robustness enhance process security in interrupted cuts and variable feed conditions. As part of the Tiger‑tec Gold family from Walter Tools, the component offers a balance between abrasive wear resistance and toughness, making it suitable for demanding threading tasks on stainless steels and many high‑temperature alloys. Discuss Walter Tools Tiger‑tec Gold threading solutions with Metav Werkzeuge for tailored application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: P26300-09005-D67-WSM37G-WALTER Label: Gewindeschneidplatte P26300-09005-D67 WSM37G Walter Tools Type: Threading insert Series: Tiger‑tec Gold Grade: WSM37G Core specifications Geometry / chipbreaker: 09005‑D67 Material designation: S / M ISO designation: P26300-09005-D67 WSM37G Special features Coated carbide (Tiger‑tec Gold) Suitable for stainless steels and heat‑resistant superalloys Stable cutting edge for demanding thread cuts Optimised chip formation and reduced built up edge FAQ Which materials is this threading insert intended for? The P26300-09005-D67 WSM37G threading insert is formulated for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), where thermal and material‑adhesive effects challenge cutting edges. What advantage does the Tiger‑tec Gold series provide? Tiger‑tec Gold offers a high‑performance coating combined with a wear‑resistant substrate that improves edge stability and wear life under elevated temperatures typical of stainless steels and superalloys. What does the 09005‑D67 chipbreaker do? The 09005‑D67 chipbreaker controls chip geometry to promote regular chip breakage and evacuation during thread cutting, helping to protect the flank and maintain thread form integrity. Can the WSM37G grade be used on titanium components? Yes; the S designation in the grade indicates suitability for heat‑resistant superalloys and titanium, where resistance to thermal degradation and edge strength are essential. How does this insert contribute to production reliability? By combining a robust coating, the WSM37G substrate properties and a controlled chipbreaker shape, the insert reduces unexpected tool wear and improves consistency in repeated threading operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
P26300-0901-D61 WSM37G WSM37G Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, consistent chip control, and high thread quality for demanding materials; order the threading insert directly via Metav Werkzeuge or contact the consultants for material-specific recommendations. P26300-0901-D61 WSM37G threading insert — Tiger·tec Gold coated, for rostfreier Stahl and superalloys (Walter Tools) P26300-0901-D61 WSM37G is a coated threading insert optimised for secure chip formation and a stable cutting edge in hard-to-machine alloys and rostfreier Stahl Tiger·tec Gold coating for extended life Optimised chip control with 0901-D61 breaker Suited to rostfreier Stahl and superalloys Stable cutting edge for repeatable threads Proven lifetime and process security for difficult materials The WSM37G grade, part of the Tiger·tec Gold series, is a coated carbide solution engineered for prolonged service in demanding applications. Its composition supports thermal resistance and edge stability, which translates into fewer index changes and longer run intervals in the production cycle. Where rostfreier Stahl and heat-resistant superalloys cause work-hardening and rapid wear, this grade promotes consistent performance and predictable tool life, helping to lower overall machining costs through reduced downtime and improved tool utilisation. Consistent thread integrity through controlled chip formation The integrated chipbreaker 0901-D61 delivers predictable chip flow and reduces the risk of built-up edge that can affect surface quality and dimensional accuracy. For thread cutting operations, this means more uniform flank geometry and fewer rework cycles. The insert’s geometry and chip control features minimise interruptions during threading, improving the repeatability of components and supporting smoother downstream processes such as assembly or inspection. Explaining briefly: a well-designed chipbreaker redirects and breaks chips, preventing entanglement and heat concentration at the cutting zone. Practical advantages for production workflows As a component in a coherent tooling strategy, the insert supports higher process stability and reproducible results on components made from rostfreier Stahl and other tough alloys. The Tiger·tec Gold series is geared towards productivity: stable edges and optimised coatings reduce wear mechanisms common in thread cutting. This reduces scrap risk and contributes to predictable cycle times, which is particularly valuable in small-batch runs and serial production alike. For customers uncertain about compatibility with specific alloys or clamping systems, technical advice is available to ensure the selected insert matches the application and holder system. Contact Metav Werkzeuge today for application-specific selection of the Walter Tools P26300-0901-D61 WSM37G threading insert, sample availability and delivery options — 📧 info@metav-werkzeuge.com • ☎️ +49 2822 7131930 Technical data SKU: P26300-0901-D61-WSM37G-WALTER Designation: P26300-0901-D61 WSM37G Series: Tiger·tec Gold Grade: WSM37G Chipbreaker: 0901-D61 Material class: S / M Product type: Threading insert Manufacturer: Walter Tools Core specifications Applicable material group M: rostfreier Stahl Applicable material group S: heat-resistant superalloys and titanium Coating technology: Tiger·tec Gold Insert geometry: thread cutting geometry Special features Coated cemented carbide grade for high thermal load Optimised chip control for thread quality Designed for stable cutting edges and long life Suitable for heavy-duty and precision threading tasks FAQ What materials is this threading insert suitable for? The P26300-0901-D61 WSM37G threading insert is designed for rostfreier Stahl (ISO group M) and for heat-resistant superalloys and titanium (ISO group S), offering improved edge stability in these materials. How does the 0901-D61 chipbreaker improve thread quality? The 0901-D61 chipbreaker controls chip formation and evacuation, reducing built-up edge and thermal concentration; this helps the Walter Tools threading insert produce consistent thread flanks and fewer reworks. Can this insert be used for serial production of threaded components? Yes, the WSM37G grade and Tiger·tec Gold coating are optimised for process security and repeatability, making the insert suitable for both small-batch and serial production where rostfreier Stahl or superalloys are involved. Is this insert part of a wider system or series? The insert belongs to the Tiger·tec Gold series; combining it with appropriate holders and clamping systems ensures stable performance and longer tool life for threading tasks. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P26300-0901-D67 WSM37G WSM37G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the WSM37G grade and the 0901‑D67 chipformer, this threading insert delivers reliable chip control and extended cutting-edge life for stainless steels and heat‑resistant superalloys; order the insert via Metav Werkzeuge or contact our consultants for application support. P26300-0901-D67 WSM37G Threading insert – Tiger·tec Gold for stainless steels and superalloys (Walter Tools) A P26300-0901-D67 WSM37G threading insert engineered for robust thread production in stainless steels and heat‑resistant superalloys, featuring a Tiger·tec Gold coated carbide grade. Tiger·tec Gold coated grade WSM37G Optimised chipformer 0901‑D67 Designed for stainless and superalloys Stable cutting edge for long tool life High-performance grade for demanding materials The combination of the Tiger·tec Gold coating and the WSM37G grade provides an optimised balance between wear resistance and thermal stability, tailored for machining stainless steels and heat‑resistant superalloys/titanium. The coated carbide substrate reduces abrasive wear while the advanced coating controls heat transfer at the cutting edge, which improves process security and reduces the risk of edge chipping. For operations where stable chip formation and repeatable thread geometry matter, this grade supports consistent production and fewer tool changes. Consistent thread quality through geometric optimisation The integrated 0901‑D67 chipformer is engineered to produce predictable chips and support stable cutting conditions during threading cycles. A controlled chipflow reduces built‑up edge formation on ductile materials and lowers the chance of thread damage, translating into fewer reworks and higher first‑pass quality. The result is a measurable improvement in machining efficiency: longer in‑service life of the insert and reduced downtime for tool changes, helping to maintain throughput and part accuracy in series production. Easy selection and reliable integration into tooling systems Standardised ISO designation P26300‑0901‑D67 WSM37G simplifies tool planning and inventory management while ensuring compatibility with common clamping and holder systems used for threading inserts. The clear material coding (S / M) indicates suitability for both superalloys and stainless steels, enabling process engineers to make informed grade choices for challenging materials. Technical documentation and grade data allow for faster decision making and smoother integration into existing process sheets. Practical application advice for stable machining When working with stainless steels and superalloys, the focus should be on maintaining edge stability and effective chip evacuation; the WSM37G grade and the 0901‑D67 chipformer are designed for precisely these tasks. Use appropriate coolant strategies and stable workholding to exploit the grade’s strengths: controlled temperatures at the cutting zone, consistent chip breakage and reduced edge wear. Selecting the correct holder rigidity and minimising vibration will further extend insert life and ensure repeatable thread form. Contact Metav Werkzeuge for application advice, quoting and availability for the Walter Tools P26300-0901-D67 WSM37G threading insert; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: P26300-0901-D67-WSM37G-WALTER ISO designation: P26300-0901-D67 WSM37G Product type: Threading insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSM37G Facts Material compatibility: S / M Suitable for stainless steels: Yes Chipformer: 0901‑D67 SKU: P26300-0901-D67-WSM37G-WALTER Special features Coated carbide grade Tiger·tec Gold coating technology Optimised chip control for threading Suited to hard‑to‑machine materials and stainless steels Stable cutting edge for extended tool life FAQ What materials is this threading insert suitable for? The P26300‑0901‑D67 WSM37G threading insert is suitable for stainless steels and heat‑resistant superalloys/titanium, as indicated by the S / M compatibility of the grade. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WSM37G grade enhances wear resistance and thermal stability, improving process security and edge life when machining demanding materials. How does the 0901‑D67 chipformer affect machining? The 0901‑D67 chipformer is designed to produce predictable chip shapes and support stable cutting conditions, which reduces built‑up edge and helps maintain accurate thread form. Is the insert compatible with standard threading holders? Yes, the ISO designation P26300‑0901‑D67 WSM37G defines the insert geometry and allows compatibility with corresponding ISO‑standard threading holders. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools: The Walter AG (brand Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Brand names and trademarks mentioned are the property of their respective owners and are used here for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original factory‑new product of the manufacturer.
P26300-0902-D61 WSM37G WSM37G Wendeplatten - Walter Tools
Take advantage of the WSM37G grade combined with Tiger·tec Gold coating for reliable performance in demanding threading tasks; the result is improved tool life and consistent chip control. Order the P26300-0902-D61 WSM37G threading insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. P26300-0902-D61 WSM37G Threading Insert – Tiger·tec Gold, for stainless steels and superalloys – Walter Tools The P26300-0902-D61 WSM37G is a precision thread-cutting insert designed for heavy-duty threading in stainless steels and heat-resistant superalloys, utilising Tiger·tec Gold coating for enhanced wear resistance. Tiger·tec Gold coating for enhanced wear resistance WSM37G grade for stainless steels and superalloys Coated carbide for a stable cutting edge 0902‑D61 chipbreaker for controlled chip formation High-performance grade for heat‑resistant and tough materials The insert’s combination of a coated carbide substrate and the Tiger·tec Gold coating delivers tangible improvements in wear resistance and thermal stability. This material pairing is particularly beneficial when working with stainless steels and nickel‑based alloys, which are prone to work hardening and elevated cutting temperatures. The WSM37G grade has been formulated to maintain a stable cutting edge under high thermal load, reducing flank wear and extending tool life. For production environments where repeatable results matter, this translates to fewer changeovers and steadier cycle times. Consistent chip control that protects cycle efficiency Built with the 0902‑D61 chipbreaker, the insert promotes predictable chip formation and evacuation, reducing the risk of built-up edge and surface damage during threading. Controlled chips minimise machine downtime and improve part finish, supporting higher productivity and process reliability. The microgeometry of the cutting edge, together with the coating’s properties, helps dissipate heat at the cutting zone and maintains edge integrity, which contributes to superior surface quality on internal and external threads. Practical integration and workshop benefits The insert is compatible with common insert housings for thread turning and is offered in the standard ISO designation for straightforward procurement and replacement. The P26300-0902-D61 WSM37G supports stable machining strategies and is especially suited for applications where material stickiness and temperature sensitivity challenge conventional grades. Further technical guidance and cutting data are available from Metav Werkzeuge to adapt feeds and speeds to specific machines and head geometries, helping to secure an efficient production flow and predictable tool consumption. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold threading inserts and immediate ordering assistance via eMail: info@metav-werkzeuge.com or telephone: +49 2822 7131930 Technical data Article number: P26300-0902-D61-WSM37G-WALTER Name: Gewindeschneidplatte P26300-0902-D61 WSM37G Walter Tools Product type: Gewindeschneidplatte (thread-cutting insert) Brand: Walter Tools Series: Tiger‑tec Gold Grade: WSM37G Chipbreaker: 0902‑D61 Material group: S / M Facts UID: P26300-0902-D61-WSM37G-WALTER SKU: P26300-0902-D61-WSM37G-WALTER Material group code: S / M Chipbreaker code: 0902‑D61 Special features Tiger·tec Gold coating technology Coated carbide grade WSM37G Optimised for stainless steels and heat‑resistant superalloys Designed for secure chip formation and stable cutting edge FAQ Which materials are best suited for this grade? The WSM37G grade is formulated for demanding materials; it is particularly effective in stainless steels and heat‑resistant superalloys where thermal stability and edge strength are required. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating increases wear resistance and heat tolerance, helping to preserve the cutting edge and extend insert life in tough threading operations. Is the chipbreaker suitable for internal and external thread turning? The 0902‑D61 chipbreaker promotes controlled chip formation suitable for both internal and external threading, improving surface finish and reducing the risk of built‑up edge. How does this insert affect production consistency? Using the WSM37G grade with its coated substrate and optimised microgeometry enhances process stability, resulting in fewer interruptions and more consistent part quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand presentation: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Swedish Sandvik Group. Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is original, factory‑new merchandise from the manufacturer.
P26300-0902-D67 WSM37G WSM37G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WSM37G grade for reliable chip control and extended tool life; the compact chipformer 0902‑D67 stabilises cutting forces for consistent threading in demanding materials. Order the insert directly via Metav Werkzeuge or consult our technical advisors for tailored process parameters. P26300-0902-D67 WSM37G Gewindeschneidplatte by Walter Tools — Tiger·tec Gold, chipformer 0902‑D67 The P26300-0902-D67 WSM37G is a precision threading insert designed for use in high-temperature and hard-to-machine materials, offering optimised chip control and thermal stability for production environments Tiger·tec Gold coating for thermal resistance Optimised 0902‑D67 chipformer for stable chips Grade WSM37G — coated carbide for hard materials Suitable for rostfreier Stahl and superalloys Consistent thread quality through optimised coating and grade The combination of the Tiger·tec Gold coating and the WSM37G carbide grade provides a balance between thermal resistance and edge strength. This results in stable chip formation and reduced risk of built-up edge when threading rostfreier Stahl or heat-resistant superalloys. The coating reduces friction at the cutting zone, which helps maintain surface finish and repeatability over longer production runs. For production managers, this translates into fewer interruptions for insert changes and more predictable cycle times. Precision chip control for efficient machining The integrated chipformer 0902‑D67 is engineered to shape and evacuate chips reliably during the threading operation. Controlled chip breaking prevents entanglement and reduces secondary operations, improving process security in automated or manual lathes. Explaining briefly: a chipformer is a small geometric feature on the insert that directs the chip flow; when matched to the material group, it lowers cutting forces and supports a cleaner thread flank. This technical alignment makes the insert a pragmatic choice for workshops seeking efficiency and repeatable thread profiles. Application spectrum and process guidance Designed for material groups S and M, the insert is particularly suited to machining high-temperature alloys and rostfreier Stahl, materials that typically generate heat and demand robust cutting edges. The coated carbide substrate delivers resistance to thermal softening while the geometry reduces edge chipping under intermittent cutting loads. For users new to these materials: choosing the correct feed, speed and coolant strategy is essential — consult process charts or our technical advisors to define the optimal parameters for tool life and thread accuracy. Contact Metav Werkzeuge for tailored cutting data or to request a technical evaluation and order the Walter Tools P26300-0902-D67 WSM37G threading insert by phone at +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com Technical Data Article number: P26300-0902-D67-WSM37G-WALTER SKU: P26300-0902-D67-WSM37G-WALTER Product type: Gewindeschneidplatte (threading insert) Series: Tiger·tec Gold Grade: WSM37G Chipformer: 0902‑D67 Manufacturer: Walter Tools Facts Material groups: S / M Suitable for rostfreier Stahl: yes Coating type: Tiger·tec Gold Substrate: coated carbide Special features Coated carbide for thermal stability Optimised chipformer for controlled chip breaking Designed for hard-to-machine alloys and rostfreier Stahl Aimed at production and demanding threading applications FAQ What materials is this threading insert suitable for? The P26300-0902-D67 WSM37G insert is suitable for material groups S and M, explicitly including superalloys and rostfreier Stahl. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating improves thermal resistance and reduces friction at the cutting edge, which helps extend tool life and maintain consistent thread quality with the WSM37G grade. What is the role of the 0902‑D67 chipformer? The 0902‑D67 chipformer shapes and breaks chips reliably during threading, aiding evacuation and preventing chip entanglement that can affect thread finish. Can this insert be used for small-batch as well as volume production? Yes, the insert’s combination of coating and geometry supports both prototype work and serial production by providing repeatable cutting behaviour and extended periods between insert changes. Is there specific process data available for machining rostfreier Stahl? Process recommendations for rostfreier Stahl depend on the machine and setup; technical cutting data for the P26300-0902-D67 WSM37G can be provided by Metav Werkzeuge or the manufacturer for optimisation. Die Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names belong to their respective owners. Brand names and protected terms are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the manufacturer. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
P26300-11005-D61 WSM37G WSM37G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a WSM37G coated‑carbide grade and the 11005‑D61 chipbreaker for extended tool life and stable chip formation when machining difficult materials; order the insert directly via Metav Werkzeuge or consult our specialists for process optimisation. P26300-11005-D61 WSM37G thread‑cutting insert — Tiger·tec Gold, Walter Tools P26300-11005-D61 WSM37G is a thread‑cutting insert developed for demanding turning and threading operations in rostfreier Stahl and heat‑resistant superalloys, utilising a dedicated 11005‑D61 chipbreaker for controlled chip evacuation Tiger·tec Gold coating for wear resistance Optimised 11005‑D61 chipbreaker for reliable chips Suitable for rostfreier Stahl and superalloys Coated carbide grade WSM37G for tough jobs Longer tool life through Tiger·tec Gold technology The combination of the Tiger·tec Gold coating and the WSM37G carbide grade delivers consistently improved wear resistance and edge stability during threading operations. For workshops processing demanding alloys, this translates into fewer insert changes and less unplanned downtime. The coating reduces adhesion and built‑up edge on reactive materials, so cutting edges retain geometry longer; the result is predictable component quality and a lower cost per thread. Stable chip control for reliable production cycles Built around an optimised chipbreaker (11005‑D61), the insert promotes short, controllable chips that clear quickly from the cutting zone. Controlled chip formation reduces the risk of entanglement and machine stoppages and supports higher feeds where process windows allow. That practical benefit is particularly relevant for automated production environments, where consistent chip behaviour helps to maintain cycle times and safeguard downstream processes. Broad material coverage for specialised applications Engineered for ISO groups M and S (rostfreier Stahl and heat‑resistant superalloys/titanium), the coated carbide composition supports secure cutting in materials that tend to work‑harden or generate high cutting temperatures. The design ensures a balance between toughness and thermal resistance, enabling repeatable threads in challenging batches. For shops addressing aerospace, medical or energy sectors, this versatility simplifies tooling strategies and reduces the need for frequent tool changes. Process security and practical handling in everyday use The thoughtful geometry and coating synergy provide process security through stable cutting edges and reliable regrinding potential where applicable. The insert’s controlled chip behaviour and wear resistance help maintain surface finish and dimensional consistency, supporting first‑pass quality and fewer secondary operations. Available in standard industry dimensions, the insert integrates into common holders without special adaptation, making it an efficient choice for production and rework alike. For secure procurement of genuine Walter Tools Tiger·tec Gold inserts and tailored application advice, contact Metav Werkzeuge — our specialists will recommend the optimal insert grade and chipbreaker for specific rostfreier Stahl or superalloy tasks. Technical Data SKU: P26300-11005-D61-WSM37G-WALTER Designation: P26300-11005-D61 WSM37G Product type: thread‑cutting insert Series: Tiger·tec Gold Grade: WSM37G Chipbreaker: 11005‑D61 Material suitability: rostfreier Stahl; superalloys (ISO M, S) Facts ISO groups covered: M, S Coating: Tiger·tec Gold Carbide type: coated carbide (WSM37G) Format / designation: P26300-11005-D61 WSM37G Special features Enhanced wear resistance for difficult materials Stable cutting edge and predictable chip formation Designed for productive threading and reduced downtime Compatible with standard threading holders FAQ Which materials is this insert suitable for? The P26300‑11005‑D61 WSM37G thread‑cutting insert machines rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), offering reliable performance in materials that tend to work‑harden or generate high cutting temperatures. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WSM37G grade improves wear resistance and reduces adhesion, so the insert maintains edge integrity longer and produces more consistent thread quality during extended runs. How does the 11005‑D61 chipbreaker affect production? The 11005‑D61 chipbreaker produces short, controllable chips that evacuate cleanly from the cutting zone, reducing the risk of entanglement and supporting uninterrupted automated or manual production cycles. Is this insert compatible with standard threading holders? Yes; the insert follows industry‑standard designation and fits conventional threading holders intended for the P26300 series geometry, easing integration into existing tool setups. Walter AG (marketed as Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are used for explanatory purposes only; there is no affiliation between our company and the named brands.
P26300-1101-D61 WSM37G WSM37G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold surface and the WSM37G coated‑carbide grade for reliable thread cutting in stainless and heat‑resistant alloys; benefit from consistent chip control with the 1101‑D61 chipformer and reduce rework in demanding applications — order directly via Metav Werkzeuge or consult our specialists for tailored recommendations. P26300-1101-D61 WSM37G Threading insert — Tiger·tec Gold coated carbide for stainless steels and superalloys | Walter Tools The P26300-1101-D61 WSM37G is a Tiger·tec Gold series threading insert from Walter Tools, designed to deliver stable cutting edges and secure chip formation when machining stainless steels and heat‑resistant superalloys. Tiger·tec Gold coating for edge stability WSM37G coated carbide grade for stainless steels 1101‑D61 chipformer for consistent chip control Higher productivity on tough materials with proven coating technology The combination of the Tiger·tec Gold coating and the WSM37G grade provides a measurable increase in process robustness when tackling workpieces that are prone to workhardening or high thermal load. The coated‑carbide structure supports a stable cutting edge, which extends tool life and reduces unscheduled insert changes. For workshops processing stainless steels or heat‑resistant superalloys, this results in fewer interruptions and a more predictable production rate. The technical design focuses on converting demanding material behaviour into repeatable, economical machining cycles. Consistent chip control and secure thread geometry for fewer rejects Built around the 1101‑D61 chipformer, the insert promotes controlled chip breakage and evacuation during thread cutting, lowering the risk of chip‑related surface damage or tool jamming. Controlled chip flow protects the thread flank and helps maintain the required profile tolerances; this is especially valuable when tolerance stacks are tight. The threading geometry is optimised for secure chip formation, which directly supports higher first‑pass quality and reduces the need for secondary finishing operations. Practical advantages for workshop integration and process reliability Selection of the WSM37G grade means a coated, wear‑resistant carbide tailored to the thermal and mechanical stresses of difficult‑to‑machine alloys. This leads to longer edge life and consistent performance across batches, simplifying tooling strategies and inventory handling. For production environments, the insert’s attributes translate into repeatable results and a reduced risk of rejects — an economic benefit through fewer machine hours and lower scrap rates. Clear specification of the grade and chipformer supports easier tool planning and safer process windows. Contact Metav Werkzeuge for application advice and reliable supply of the Tiger·tec Gold WSM37G threading insert, including recommendations for optimal cutting parameters and availability Technical data SKU: P26300-1101-D61-WSM37G-WALTER Item designation: P26300-1101-D61 WSM37G Product type: Threading insert Series: Tiger·tec Gold Brand: Walter Tools Data Grade: WSM37G Chipformer: 1101‑D61 Material applicability: S / M Special features Coated carbide (Tiger·tec Gold) Suitable for stainless steels (M) and heat‑resistant superalloys/titanium (S) Optimised for secure chip formation and edge stability FAQ What materials is this threading insert suitable for? The P26300-1101-D61 WSM37G threading insert is designed for stainless steels (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), where its coating and grade support stable cutting behaviour. How does the Tiger·tec Gold coating benefit the insert? The Tiger·tec Gold coating on the WSM37G grade improves heat resistance and wear behaviour, which helps maintain the cutting edge during continuous thread cutting operations and enhances overall tool life. What role does the 1101‑D61 chipformer play in performance? The 1101‑D61 chipformer shapes and breaks chips reliably during thread cutting, reducing the chance of chip entanglement and protecting the thread profile, which supports consistent production quality. Is this insert suitable for serial production? Yes, the WSM37G grade and Tiger·tec Gold series are engineered for process stability and repeatable performance, making the insert a good choice for serial manufacturing of components in demanding materials. How should one choose between different insert grades for similar applications? Selection depends on material, cutting conditions and desired tool life; the WSM37G grade is recommended where heat resistance and edge stability are priorities, particularly with stainless steels and high‑temperature alloys. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, brand‑new goods from the manufacturer. The Walter AG (brand: Walter Tools) is part of the Sandvik Group.
P26300-1102-D61 WSM37G WSM37G Wendeplatten - Walter Tools
Take advantage of the proven wear resistance of the Tiger·tec Gold grade combined with an optimised chipbreaker for secure chip formation and consistent thread quality; order the insert directly from Metav Werkzeuge or request tailored application advice from our consultants. P26300-1102-D61 WSM37G thread cutting insert – Tiger·tec Gold coating for stainless steels and superalloys (Walter Tools) The P26300-1102-D61 WSM37G is a thread cutting insert engineered for reliable production threading in rostfreie Stähle and heat-resistant alloys, optimised to support stable cutting edges and effective chip control. Tiger·tec Gold coating for enhanced wear resistance Optimised 1102-D61 chipbreaker for secure chips For stainless steels and heat-resistant alloys Fits P26300 series insert holders Increased component quality through a high-performance grade The combination of the Tiger·tec Gold coating and the WSM37G carbide grade delivers a measurable improvement in abrasion resistance and thermal stability during thread turning of difficult-to-cut materials. The coated carbide substrate reduces flank wear and slows crater development, which maintains thread profile accuracy over longer tool life. The integrated 1102-D61 chipbreaker supports repeatable chip segmentation, reducing built-up edge and helping to secure consistent pitch and surface finish on internal and external threads. These technical characteristics translate directly into fewer rejected parts and longer uninterrupted production runs. Process reliability and production efficiency Thanks to the grade’s emphasis on edge robustness and heat resistance, the insert offers enhanced process reliability for demanding batches. Stable cutting edges reduce the frequency of tool changes and rework, improving overall equipment effectiveness. Where stainless steels and superalloys tend to work-harden or form long, stringy chips, the chip control geometry ensures predictable chip flow and reduced cycle interruptions. The result is a practical cost benefit: lower tooling consumption per finished component and steadier machining cycles that support higher throughput without sacrificing surface quality. Application scope and compatibility across machining systems The thread insert is suitable for use in CNC lathes and turning centres equipped for ISO-compatible threading inserts. Designed to fit holders compatible with the P26300 insert family, the solution suits a range of production environments from prototype runs to series manufacturing. Material suitability includes stainless steels and heat-resistant superalloys (ISO group M and S), where thermal load and edge stability are critical. Operators and process engineers can expect consistent thread geometry when the insert is used in appropriately rigid setups and with coolant strategies that match the workpiece material. Practical handling and integration benefits Installation and replacement follow standard insert-handling procedures; the geometry and designation simplify tool management in production departments that run mixed materials. The coated grade minimises the need for frequent dressing or reconditioning, while the clear ISO-style designation aids rapid tool identification and inventory control. For contract manufacturers and in-house production teams alike, the insert supports predictable maintenance planning and contributes to overall operational discipline by standardising thread cutting performance across shifts. For detailed machining recommendations or to confirm holder compatibility with the Walter Tools P26300-1102-D61 WSM37G thread cutting insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support and application advice. Technical data Article number: P26300-1102-D61-WSM37G-WALTER Designation: P26300-1102-D61 WSM37G Core data Material group: S / M Product type: thread cutting insert Special features Series: Tiger·tec Gold Grade: WSM37G (coated carbide) Chipbreaker: 1102-D61 Suitable for: stainless steels and heat-resistant superalloys FAQ What materials is the P26300-1102-D61 WSM37G suitable for? The P26300-1102-D61 WSM37G insert is specified for rostfreie Stähle (stainless steels) and heat-resistant superalloys (ISO groups M and S), offering thermal stability and secure chip control during threading operations. Which holders are compatible with this thread cutting insert? Holders designed for the P26300 series of inserts are compatible; the P26300-1102-D61 designation indicates the insert form and fitment required for correct seating and clamping. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating enhances wear resistance and thermal protection, extending edge life and supporting consistent thread quality under elevated cutting temperatures common with rostfreie Stähle and superalloys. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P26300-1102-D67 WSM37G WSM37G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WSM37G carbide grade together with the 1102‑D67 chipbreaker for stable cutting edges and reliable chip control when machining stainless steel and heat‑resistant alloys. Order the P26300-1102-D67 WSM37G threading insert directly via Metav Werkzeuge or ask our consultants if needed. P26300-1102-D67 WSM37G thread-cutting insert by Walter Tools — Tiger·tec Gold coating, for stainless steel and superalloys A P26300-1102-D67 WSM37G indexable threading insert engineered for consistent chip formation and extended tool life when working with high-temperature alloys and stainless steel. Tiger·tec Gold coating for thermal stability WSM37G grade for hard-to-machine materials 1102-D67 chipbreaker for controlled chips Robust cutting edge for reliable process security Higher productivity through coating and grade advantages The combination of the Tiger·tec Gold coating and the WSM37G coated carbide substrate provides a measurable improvement in thermal resistance and edge stability during interrupted or continuous threading operations. This coating technology reduces adhesive wear and supports secure chip control, which helps to avoid built-up edge and improve cycle consistency. For production environments where material variability and heat generation are relevant factors, this pairing supports steady cutting conditions and fewer tool changes, resulting in higher uptime and predictable output. Predictable chip formation and geometry benefits The dedicated 1102‑D67 chipbreaker geometry is designed to channel chips away from the cutting zone and reduce entanglement during thread cutting. In practical terms, this leads to improved surface quality and fewer interruptions for chip clearing. The geometry is particularly effective when paired with the specified grade for materials that are prone to work hardening or that generate long, stringy swarf. Clear chip evacuation therefore contributes directly to process reliability and a reduction in rework rates. Suitability for stainless steel and heat‑resistant alloys Chosen for jobs involving stainless steel and high‑temperature superalloys, the insert’s WSM37G specification emphasises resistance to thermal loading and edge breakdown. These workpiece groups demand materials and coatings that maintain a sharp, stable cutting edge under intense heat; the supplied grade meets that need by offering optimised wear resistance. For operations that require repeatable thread profiles and minimal downtime, this insert provides a balance of performance and durability that supports consistent part quality. Application and handling guidance for shops and production As an indexable threading insert, the insert is compatible with standard thread holders designed for the P26300 series designation; correct seat and clamping ensure the expected performance of the 1102‑D67 chipbreaker. When integrating into multi‑shift or automated cells, attention to cutting parameters—speed, feed and coolant strategy—will extend tool life and maintain surface finish. The information provided supports straightforward process setup and reduces trial cycles when switching to this grade and geometry. Contact Metav Werkzeuge to specify the correct insert and cutting data for the application or to arrange technical consultation regarding the P26300-1102-D67 WSM37G threading insert by Walter Tools Technical data Article number: P26300-1102-D67-WSM37G-WALTER Designation: P26300-1102-D67 WSM37G Product type: thread-cutting insert (indexable) Manufacturer: Walter Tools Facts Material groups: S / M Chipbreaker: 1102-D67 Grade/Coating: WSM37G, Tiger·tec Gold Special features Coated carbide grade for thermal resistance Target materials: stainless steel; heat‑resistant superalloys and titanium (ISO groups M, S) Application: thread cutting with optimised chip control FAQ What materials is this insert intended for? The P26300-1102-D67 WSM37G threading insert by Walter Tools is suitable for stainless steel and heat‑resistant superalloys (ISO groups M and S), with the grade optimised for thermal resistance and stable cutting edges. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WSM37G grade increases thermal resilience and reduces adhesive wear, which supports longer edge life and more consistent chip formation during demanding thread-cutting operations. Which chipbreaker is fitted and what is its benefit? The insert features the 1102‑D67 chipbreaker, specifically designed to control chip flow and prevent entanglement, improving surface finish and lowering the need for manual chip clearing. Is this insert compatible with standard thread holders? Yes, the design corresponds to the P26300 family seating and is compatible with common thread holders that accept this indexable insert designation; correct seating and clamping are essential for performance. Can this insert be used for serial production in automated cells? The WSM37G grade with Tiger·tec Gold coating and the 1102‑D67 geometry is well suited to serial production where thermal loads and chip control are critical; appropriate cutting data and coolant strategy are recommended for maximum life. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, brand‑new goods from the manufacturer.
P26300-14005-D61 WSM37G WSM37G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WSM37G grade and a purpose-designed chipbreaker for secure chip formation and long tool life; order directly via Metav Werkzeuge or consult the specialists for application advice. P26300-14005-D61 WSM37G Threading Insert — Tiger·tec Gold, Walter Tools The P26300-14005-D61 WSM37G is a threading insert designed for high-performance thread turning in demanding materials, optimised for rostfreier Stahl and heat‑resistant superalloys. Tiger·tec Gold coating for wear resistance Optimised for rostfreier Stahl and superalloys Stable chip formation with 14005‑D61 geometry Robust, coated cemented carbide grade WSM37G High-efficiency threading for challenging alloys The combination of a coated cemented carbide grade and the Tiger·tec Gold technology delivers a measurable improvement in process reliability when machining hard-to-cut materials. This grade supports secure cutting edges under elevated temperatures and helps to prevent built-up edge formation when working with rostfreier Stahl and ni‑based superalloys. The result is fewer rejects and more consistent thread quality, which benefits batch production and critical single‑part manufacture alike. Consistent chip control and extended edge life A chipbreaker coded 14005‑D61 gives controlled chip segmentation and evacuation, reducing the risk of workpiece surface damage and tool interference. The optimised geometry reduces cutting forces and heat concentration at the cutting edge, which in turn extends tool life and stabilises dimensional repeatability. For process planners this translates into longer tool cycles between indexings and a steadier production output with predictable maintenance intervals. Application guidance and material compatibility The insert is specified for the ISO material groups indicated by the grade designation S / M, meaning suitability for heat‑resistant superalloys and rostfreier Stahl. In practice, selecting this grade is advisable where thermal resistance and edge stability are priorities—typical in aerospace, energy and specialist engineering components. The coated grade supports dry and minimum‑quantity lubrication strategies where compatible with the workpiece and process documentation. Discuss application specifics with Metav Werkzeuge to ensure the P26300-14005-D61 WSM37G threading insert fits the machining strategy and material mix; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice Technical Data Article number: P26300-14005-D61-WSM37G-WALTER Designation: P26300-14005-D61 WSM37G Product type: Threading insert Facts Grade: WSM37G Series: Tiger·tec Gold Chipbreaker: 14005‑D61 Material class: S / M Special features Coating: Tiger·tec Gold (coated cemented carbide) Suitable for rostfreier Stahl and heat‑resistant superalloys Application: Thread turning / thread cutting Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The P26300-14005-D61 WSM37G insert is intended for rostfreier Stahl and heat‑resistant superalloys, corresponding to the S / M ISO groups. How does the Tiger·tec Gold coating benefit threading operations? Tiger·tec Gold increases thermal resistance and wear protection, improving edge life and consistency during high‑temperature cutting of difficult alloys. Which chipbreaker should be selected for secure chip control? The 14005‑D61 chipbreaker offers controlled chip segmentation and reliable evacuation for thread turning tasks with this grade. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P26300-14005-D67 WSM37G WSM37G Wendeplatten - Walter Tools
Take advantage of a high-performance combination: the Tiger·tec Gold coating together with the WSM37G grade offers secure chip formation and extended cutting-edge stability, helping to reduce rework and machine downtime. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. P26300-14005-D67 WSM37G – Threading insert, Tiger·tec Gold, Walter Tools A P26300-14005-D67 WSM37G threading insert engineered for reliable thread turning in difficult-to-machine materials and, depending on geometry, stainless steels. Tiger·tec Gold coated carbide grade WSM37G Optimised for stainless steels and superalloys Geometry 14005-D67 for reliable chip control High cutting-edge stability for long tool life Consistently precise threads in demanding materials The combination of the Tiger·tec Gold coating and the WSM37G grade provides a balance of hardness and toughness that is particularly suitable for machining stainless steels and heat-resistant alloys. Coated cemented carbide is used to withstand elevated cutting temperatures and to reduce build-up on the cutting edge. This results in consistent thread profiles and fewer rejects, which supports predictable cycle times in production environments. The material properties are selected to favour stable chip formation, reducing the risk of thread damage and improving process reliability. Geometry that improves chip control and surface quality The specified chipbreaker 14005-D67 is designed to manage chip flow during threading operations, minimising entanglement and promoting continuous evacuation. Controlled chip formation reduces the likelihood of built-up edge on the insert and helps maintain a stable cutting edge over longer tool life. In practice, this means fewer interruptions for manual chip removal and a reduced need for secondary finishing. The geometry is therefore a direct contributor to higher productivity and a better surface finish on internal and external threads. Application benefits and process economy When machining tough alloys and stainless steels, a coated grade such as WSM37G supports a reproducible cutting performance and extended tool life. The insert’s properties are focused on heat resistance and wear protection, which lower the frequency of tool changes and help to maintain dimensional accuracy across batches. For manufacturers, this translates into a more economical process: fewer tool holders and less downtime, while preserving surface quality and thread accuracy. If specific cutting data are required, technical consultation is recommended to match cutting parameters to the machine and material. Contact Metav Werkzeuge for application advice on Walter Tools Tiger·tec Gold threading inserts and to identify the optimal grade for stainless steels and superalloys — eMail: info@metav-werkzeuge.com or Tel: +49 2822 7131930 Technical data SKU: P26300-14005-D67-WSM37G-WALTER Article designation: P26300-14005-D67 WSM37G Product type: Threading insert Series: Tiger·tec Gold Grade: WSM37G Chipbreaker: 14005-D67 Manufacturer: Walter Tools Core specifications Material group: S / M Suitable for: Stainless steels (M), heat‑resistant superalloys and titanium (S) Special features Coating technology: Tiger·tec Gold Coated cemented carbide grade WSM37G Application: Difficult-to-machine materials and stainless steels Geometry/chipbreaker: 14005-D67 FAQ What materials is this insert suitable for? The P26300-14005-D67 WSM37G insert by Walter Tools is specified for stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), depending on the chosen geometry. What are the advantages of the Tiger·tec Gold coating? The Tiger·tec Gold coating on the WSM37G grade increases thermal and wear resistance, which helps the insert maintain cutting-edge integrity and reduces the tendency for built-up edge during threading. How does the 14005-D67 geometry affect performance? The 14005-D67 chipbreaker is engineered for controlled chip flow and minimised chip entanglement, leading to improved process stability and consistent thread quality. Can this insert improve overall process economy? Yes. The WSM37G grade and Tiger·tec Gold coating contribute to longer tool life and fewer tool changes, which reduces machine downtime and supports a more cost‑efficient production flow. Is the P26300-14005-D67 WSM37G compatible with common thread holders? The insert designation corresponds to standard threading insert formats; compatibility should be verified with the chosen toolholder and machine setup before initial use. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only; there is no affiliation between our company and the mentioned brands. The offered item is original factory‑new goods of the manufacturer (Walter Tools).
P26300-1401-D61 WSM37G WSM37G Wendeplatten - Walter Tools
Take advantage of the combination of a heat‑resistant Tiger‑tec Gold coating, a chipforming grade for demanding materials, and proven holder compatibility to maintain steady production. Order directly via Metav Werkzeuge or contact our consultants for machining recommendations. P26300-1401-D61 WSM37G Threading Insert — Tiger‑tec Gold coated for stainless steels and superalloys | Walter Tools The P26300-1401-D61 WSM37G is a threading insert engineered for secure chip control when machining stainless steels and heat‑resistant superalloys, combining a coated‑carbide grade with a dedicated chipbreaker for demanding threading applications. Tiger‑tec Gold coated for high heat resistance Grade WSM37G for stable chip formation Optimised for stainless steel and superalloys Compatible with standard P26300 holders High‑performance grade for challenging materials The combination of Tiger‑tec Gold coating and the WSM37G grade provides a balance of heat resistance and edge stability, which is essential when machining materials that generate high temperatures and tend to work‑harden. The coated carbide composition reduces flank wear and supports consistent cutting conditions, so cycle times remain predictable even under elevated thermal loads. This makes the insert particularly suited to series production where reproducible results and longer tool life contribute directly to lower unit costs and fewer tool changes. Predictable threading and improved chip control Equipped with the chipbreaker 1401‑D61, the insert promotes controlled chip formation during threading operations, reducing the risk of built‑up edge and thread‑distorting chip strings. Predictable chip breakage improves surface finish and reduces secondary operations. In practical terms, this means fewer interruptions for chip clearing, a steadier machining process and a measurable increase in throughput for components made from stainless steels or titanium‑alloy categories. Designed for integration and reliable assembly The geometry and seat form are designed for compatibility with the P26300 family of holders, enabling straightforward replacement without modification of existing tool setups. The insert’s design supports repeatable positioning and clamping force distribution, which assists in achieving consistent thread quality. For workshops aiming to streamline tooling logistics, the ability to use established holders while upgrading the cutting grade offers an efficient path to improved performance without additional fixture investment. Application guidance and technical support Recommended for production environments processing rostfreier Stahl (stainless steels) and heat‑resistant superalloys, this threading solution answers needs for durability and process security in demanding materials. If further machining parameters are required—such as feeds, speeds or coolant strategy—Metav Werkzeuge provides technical consultation to match the insert grade and geometry to the workpiece and the machine tool. Contact details are available for rapid support by e‑mail or phone for application checks and supplementary data. Contact Metav Werkzeuge for tailored application advice and secure supply of Walter Tools Tiger‑tec Gold threading inserts Technical Data Article number: P26300-1401-D61-WSM37G-WALTER Designation: P26300-1401-D61 WSM37G Product type: Gewindeschneidplatte Series: Tiger‑tec Gold Grade: WSM37G Manufacturer: Walter Tools Facts Applicable material groups: S / M Chipbreaker: 1401-D61 Suitable for: rostfreier Stahl (stainless steels) Material base: coated carbide Special features Coating: Tiger‑tec Gold Purpose: threading insert for demanding materials Benefits: stable chip formation, heat resistance, wear resistance Compatibility: P26300 insert geometry and holders FAQ What materials is this insert suitable for? The P26300-1401-D61 WSM37G threading insert is specified for stainless steels and heat‑resistant superalloys, reflecting the WSM37G grade’s focus on heat resistance and edge stability. Which chipbreaker does the insert use and why does it matter? This insert uses the 1401‑D61 chipbreaker; it controls chip shape during threading, which improves surface finish and reduces the likelihood of chip entanglement in thread grooves. Can the insert be used in existing P26300 toolholders? Yes, the geometry is compatible with standard P26300 holders, allowing straightforward integration into current tooling systems without additional adapters. How does the Tiger‑tec Gold coating benefit production runs? The Tiger‑tec Gold coating enhances thermal resistance and wear behaviour, helping to maintain cutting edge integrity over longer runs and reducing tool change frequency. Where to get help with cutting data for this insert? For cutting data and machining recommendations, Metav Werkzeuge can provide application support and parameter suggestions tailored to the selected workpiece and machine. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P26300-1401-D67 WSM37G WSM37G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, stable chip control and compatibility with stainless steels and superalloys for efficient, repeatable thread production. Order the inserts directly via Metav Werkzeuge or consult our team for suitability and availability. P26300-1401-D67 WSM37G Threading Insert — Tiger·tec Gold, for stainless steels and superalloys (Walter Tools) The P26300-1401-D67 WSM37G is a threading insert optimised for heavy-duty thread turning in stainless steels and heat-resistant superalloys, combining a coated carbide grade with Tiger·tec Gold technology for improved tool life. Tiger·tec Gold coating for long tool life Optimised for stainless steels and superalloys Stable cutting edge and secure chip control Coated carbide for high wear resistance Efficient thread turning in demanding materials This threading insert delivers a reliable balance of toughness and wear resistance through the WSM37G grade, a coated cemented carbide designed for challenging workpiece materials. The combination of a robust substrate and the Tiger·tec Gold coating supports consistent cutting-edge stability, reducing the frequency of index changes and downtime. For operations involving a tendency to build up edge or high heat generation, the insert’s formulation promotes secure chip formation, which helps maintain dimensional accuracy and repeatability in production runs. Coating and material advantages that reduce process risk The Tiger·tec Gold technology enhances thermal resistance and wear behaviour, which is especially important when machining materials classified under ISO 513 as M (stainless steels) and S (heat-resistant superalloys and titanium). Coated carbide inserts benefit from a graded coating system that improves resistance to abrasion and adhesive wear; this means the tool sustains cutting performance over longer cycles and withstands the severe conditions typical in thread turning. Technical terms such as “chip control” refer here to the insert’s geometry and chipbreaker combination that guide swarf away from the cutting zone, lowering the risk of re-cutting and surface damage. Practical benefits for workshop efficiency and process reliability Selecting a grade tailored to the application reduces scrap and rework. The insert’s stable cutting edge and controlled chip evacuation contribute to improved surface finish and repeatable thread form, which in turn shortens downstream inspection and assembly time. For production environments where consistency matters, this insert supports higher uptime and predictable tool-change intervals. Where thread quality and process security are priorities, the use of a specialised coated grade such as this one provides a measurable advantage in throughput and lifecycle costs. Contact Metav Werkzeuge for a technical consultation on suitability and stock availability of Walter Tools Tiger·tec Gold threading inserts and to arrange sample trials or delivery coordination. Technical data Article number: P26300-1401-D67-WSM37G-WALTER Product type: Threading insert Manufacturer: Walter Tools SKU / UID: P26300-1401-D67-WSM37G-WALTER Facts Grade: WSM37G Chipbreaker / geometry: 1401-D67 Series: Tiger·tec Gold Material suitability: S / M ISO designation: P26300-1401-D67 WSM37G Special features Coating: Tiger·tec Gold Carbide: coated cemented carbide Suitable for: stainless steels (M), superalloys and titanium (S) Application: heavy-duty and hard-to-machine materials FAQ What materials is this threading insert intended for? The P26300-1401-D67 WSM37G insert is designed primarily for stainless steels (M) and heat-resistant superalloys/titanium (S) according to ISO 513 classifications. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating increases thermal and abrasive resistance, extending tool life and improving performance when machining tough or heat-sensitive materials with the Walter Tools threading insert. Is the WSM37G grade suitable for high-temperature cutting? Yes; WSM37G is developed for elevated thermal loads encountered when machining superalloys and stainless steels, offering stable cutting edges under demanding conditions. Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original factory-new product of the manufacturer.
P26300-1402-D61 WSM37G WSM37G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a dedicated 1402‑D61 chipbreaker and a grade engineered for demanding alloys to secure consistent thread quality and extended tool life; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. P26300-1402-D61 WSM37G Threading insert by Walter Tools — Tiger·tec Gold for stainless steel and superalloys A P26300-1402-D61 WSM37G threading insert optimised for stable cutting and controlled chip formation when machining stainless steels and heat‑resistant superalloys. Tiger·tec Gold coated carbide grade WSM37G Designed for stainless steel and superalloys Chipbreaker geometry 1402‑D61 for reliable chips High cutting‑edge stability from Walter Tools Greater productivity in difficult materials The combination of Tiger·tec Gold technology and the WSM37G grade delivers improved thermal resistance and wear protection, which translates into longer intervals between tool changes and a steadier cutting process. This coated carbide formulation is aimed at components where heat accumulation and material adhesion threaten surface quality; in such cases the insert's enhanced coating helps to maintain a stable cutting edge and predictable performance. The result is fewer interruptions on the shop floor and a more consistent rate of production for threading operations in demanding metals. Reliable chip control for consistent thread form The 1402‑D61 chipbreaker is designed to produce compact, controllable chips during thread cutting, reducing the risk of chip entanglement and surface damage. Good chip control is essential for maintaining thread geometry and minimising rework; the geometry channels material away from the cutting zone and supports continuous chip evacuation. For threading applications where process stability and repeatable quality matter, this feature improves cycle reliability and reduces downtime related to chip clearance. Extended tool life and process stability Built as a coated tungsten carbide insert, the grade emphasises resistance to abrasion and thermally induced edge breakdown. The interaction of coating and substrate reduces flank wear and supports a longer tool life, which lowers tooling consumption and contributes to a better cost‑per‑part ratio in production. In addition, the insert’s robustness supports stable cutting conditions that help protect machine time and maintain consistent thread tolerances over longer batches. Clear guidance on application and material groups The insert is suitable for ISO material groups M and S: ISO M denotes applications in stainless steel where toughness and built‑up edge formation can occur, while ISO S covers heat‑resistant superalloys and titanium, materials that demand thermal stability and edge integrity. Selection of the appropriate geometry and machining parameters remains essential; the combination of the WSM37G grade and the 1402‑D61 chipbreaker provides a versatile option for many thread‑cutting scenarios in such materials. For specific component requirements, refer to machining guidelines or request technical support for parameter optimisation. For threaded part manufacturing in stainless steel or superalloys, rely on the Walter Tools P26300‑1402‑D61 WSM37G insert and contact Metav Werkzeuge for tailored application advice and rapid supply Technical Data Article number: P26300-1402-D61-WSM37G-WALTER Product designation: P26300-1402-D61 WSM37G Product type: Gewindeschneidplatte Series: Tiger·tec Gold Grade: WSM37G Chipbreaker: 1402-D61 Manufacturer: Walter Tools Material classification: S / M Facts ISO material groups: M, S Coating technology identifier: Tiger·tec Gold Format code: P26300-1402-D61 SKU/UID: P26300-1402-D61-WSM37G-WALTER Special features Coated carbide for thermal and wear resistance Optimised for secure chip formation in threading Suitable for stainless steel (ISO M) Suitable for heat‑resistant superalloys and titanium (ISO S) Engineered for stable cutting edge and extended tool life FAQ What materials can this insert machine effectively? The P26300‑1402‑D61 WSM37G threading insert is designed for ISO M and ISO S groups, making it suitable for stainless steel and heat‑resistant superalloys, with proven stability in demanding applications. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold on the WSM37G grade enhances thermal resistance and wear protection, helping the insert keep a stable cutting edge and delivering longer tool life under elevated temperatures. Which chipbreaker should be selected for reliable threading? The 1402‑D61 chipbreaker used on this insert provides controlled chip formation for threading operations, reducing the risk of chip interference and improving overall thread quality. Is this insert suitable for titanium machining? Yes, when used within the ISO S material group guidance, the insert’s thermal stability makes it applicable to titanium and other heat‑resistant alloys, with appropriate cutting data. Who manufactures the insert and where can more application data be obtained? The insert is supplied by Walter Tools; further machining recommendations and application support are available through Metav Werkzeuge or the Walter Tools technical literature. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
P26300-1402-D67 WSM37G WSM37G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WSM37G grade and the 1402‑D67 chipbreaker for secure chip control and long tool life when machining stainless steel and heat‑resistant alloys; order directly via Metav Werkzeuge or contact our consultants for application advice. Gewindeschneidplatte P26300-1402-D67 WSM37G — thread cutting insert for stainless steel and superalloys | Walter Tools The Gewindeschneidplatte P26300-1402-D67 WSM37G is a purpose‑built thread cutting insert optimised for use on stainless steel and difficult‑to‑machine superalloys, delivering consistent chip formation and edge stability. Tiger·tec Gold coated carbide grade WSM37G Optimised for stainless steel and superalloys Stable cutting edge with 1402‑D67 chipbreaker High‑performance thread cutting for demanding materials The insert employs a coated carbide substrate combined with the Tiger·tec Gold technology and the WSM37G grade to provide high thermal resistance and reliable wear behaviour during thread cutting. This combination reduces the risk of built‑up edge formation when working with stainless steel, where adhesion and heat generation are common challenges. The result is a reproducible cutting action with fewer process interruptions, which supports higher productivity in series production and shortens rework times. Controlled chip formation and process security Equipped with the 1402‑D67 chipbreaker, the insert ensures predictable chip geometry and evacuation even on sticky materials. Stable chips reduce the likelihood of surface damage and thread distortion, and the optimised chipformer contributes directly to process security in CNC operations. For shops producing threaded components in corrosion‑resistant alloys and superalloys, the predictable chip flow lowers cycle variability and enables repeatable quality across batches. Coating and grade explained — longer life, consistent accuracy The Tiger·tec Gold coating enhances heat resistance and abrasive wear properties, while the WSM37G wear‑resistant grade maintains a sharp cutting edge under thermal and mechanical stress. Together these features extend tool life and help preserve thread form accuracy over longer cutting intervals. The term “coated carbide” refers to a hardmetal body with a thin, adherent coating that improves surface hardness and reduces friction; this is particularly beneficial when machining materials that tend to work‑harden. Integration into production and practical tips When integrating the insert into existing toolholders, ensure the seating is clean and that recommended cutting data for stainless steel and superalloys are followed to avoid premature edge failure. Monitoring cutting forces and chip shape during the first pieces provides quick feedback on feed and speed settings. The insert’s design supports automated turning centres and multi‑spindle machines, offering a balance of process reliability and cost‑effective performance for medium to high‑volume production. Contact Metav Werkzeuge for tailored cutting data and to discuss how Walter Tools Tiger·tec Gold inserts can improve thread quality and productivity — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data SKU: P26300-1402-D67-WSM37G-WALTER WPL ISO designation: P26300-1402-D67 WSM37G Product type: thread cutting insert (Gewindeschneidplatte) Manufacturer: Walter Tools UID: P26300-1402-D67-WSM37G-WALTER Facts Grade / coating: WSM37G, Tiger·tec Gold Chipbreaker: 1402-D67 Material groups: S / M Special features Coated carbide wear grade Optimised for stainless steel and heat‑resistant superalloys Stable cutting edge and controlled chipformer FAQ What materials is this insert suitable for? The Gewindeschneidplatte P26300-1402-D67 WSM37G is suited to stainless steel and heat‑resistant superalloys (ISO groups S and M), offering secure chip control and reduced built‑up edge. How does the Tiger·tec Gold coating help in thread cutting? The Tiger·tec Gold coating on the WSM37G grade increases thermal resistance and wear protection, which prolongs edge life and maintains thread form when cutting tough, heat‑sensitive materials. What is the role of the 1402‑D67 chipbreaker? The 1402‑D67 chipbreaker is designed to produce compact, controllable chips that evacuate cleanly from the thread form, improving surface finish and reducing the chance of thread deformation. Can this insert be used on automated turning centres? Yes, the geometry and secure chip control of this insert make it suitable for automated turning centres and multi‑spindle production where consistent cycle times and repeatability matter. How does the WSM37G grade differ from standard carbide grades? WSM37G is a wear‑resistant, coated carbide grade optimised for adhesive and thermally aggressive materials; it focuses on edge stability and longer life under elevated cutting temperatures. Manufacturer: Walter Tools; Walter AG, Tübingen, Germany
P26300-1404-D61 WSM37G WSM37G Wendeplatten - Walter Tools
Take advantage of the high wear resistance and stable cutting-edge behaviour of the Tiger·tec Gold grade together with the optimised chipformer for reliable thread quality and fewer interruptions in production; order the insert directly via Metav Werkzeuge or contact the consultants for tailored advice. P26300-1404-D61 WSM37G — Threading insert, Tiger·tec Gold grade (Walter Tools) A P26300-1404-D61 WSM37G threading insert engineered for secure chip control and consistent thread form when machining rostfreier Stahl and heat-resistant superalloys Tiger·tec Gold coating for edge stability WSM37G grade for hard-to-machine alloys Optimised chipformer for secure chip control Suitable for rostfreier Stahl and superalloys Improved process reliability through a coated carbide grade The combination of a Tiger·tec Gold coating and the WSM37G cutting grade delivers pronounced edge stability and extended tool life under demanding conditions. The coated cemented-carbide structure reduces flank wear and supports reproducible cutting behaviour when producing threads, which means fewer tool changes and higher machine uptime. This stability is particularly beneficial in series production where consistent dimensional results are essential and process interruptions are costly. Consistent chip control for predictable thread quality An optimised chipformer geometry enables controlled chip breakage and evacuation, reducing the risk of built-up edge and improving surface finish on internal and external threads. The insert’s chip management properties translate into shorter secondary operations and more reliable cycle times. When machining materials prone to stringy or adhesive chips, this geometry helps maintain a steady cutting force and contributes to repeatable thread profiles with minimal rework. Machining scope and practical guidance for demanding materials The grade is tailored for the material groups M and S: M for rostfreier Stahl (stainless alloys) and S for heat-resistant superalloys and titanium, both of which demand thermal and mechanical robustness from the cutting edge. Selection of cutting parameters should account for workpiece alloy, component geometry and machine rigidity; appropriate coolant application and conservative feed adjustments will support the insert’s wear behaviour and help achieve the specified thread tolerance. The insert’s design benefits workshops seeking dependable performance on difficult-to-machine components without complex tool management. Contact Metav Werkzeuge for project-specific recommendations on the Walter Tools Tiger·tec Gold threading inserts and for availability and delivery options Technical Data SKU: P26300-1404-D61-WSM37G-WALTER Article designation: P26300-1404-D61 WSM37G Product type: Threading insert Brand: Walter Tools Facts Grade: WSM37G Series: Tiger·tec Gold Chipbreaker: 1404-D61 Material designation: S / M Special features Coated cemented-carbide cutting material Optimised chipformer for secure chip control Suited for rostfreier Stahl and heat-resistant superalloys Designed for stable cutting edge and reproducible results FAQ What materials is this insert suitable for? The P26300-1404-D61 WSM37G threading insert is suitable for rostfreier Stahl and heat-resistant superalloys (material groups M and S), offering enhanced edge stability for these demanding alloys. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WSM37G grade increases wear resistance and thermal stability, which supports longer tool life and more consistent thread quality in repetitive machining processes. Can this insert be used for both internal and external threading? Yes, the insert design and its optimised chipformer support controlled chip evacuation for both internal and external threading applications when proper geometry and parameters are selected. What should be considered when machining rostfreier Stahl with this insert? When machining rostfreier Stahl, use appropriate coolant strategies and conservative feeds to reduce heat build-up; the WSM37G grade helps maintain a stable cutting edge under these conditions. Which series and chipbreaker are specified for this SKU? The insert belongs to the Tiger·tec Gold series with chipbreaker designation 1404-D61 for the listed SKU. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P26300-1404-D67 WSM37G WSM37G Wendeplatten - Walter Tools
High-temperature stability and the Tiger·tec Gold coating combine to deliver extended tool life and consistent thread form; the proven WSM37G grade supports productive machining of rostfreier Stahl and heat‑resistant alloys. For straightforward procurement or application advice, order the insert directly via Metav Werkzeuge or consult the team for process recommendations. P26300-1404-D67 WSM37G threading insert — Tiger·tec Gold coating, for rostfreier Stahl and superalloys | Walter Tools The P26300-1404-D67 WSM37G is a threading insert engineered for stable thread generation in rostfreier Stahl and heat‑resistant superalloys, combining a coated carbide grade with a geometry optimised for secure chip formation. Tiger·tec Gold coated carbide grade WSM37G Optimised for rostfreier Stahl and superalloys Robust cutting edge stability at high temperatures Precision thread form with 1404-D67 geometry Achieve repeatable thread quality under thermal stress The combination of Tiger·tec Gold coating and the WSM37G cutting grade delivers a surface treatment and substrate pairing designed for heat resistance and wear control during demanding thread turning. Coating technology reduces friction and improves oxidation resistance, which in turn supports consistent cutting performance when machining materials with poor thermal conductivity. This results in fewer tool changes and a reduction in defective threads, improving overall process efficiency for batch and single‑piece production. Minimise rework with stable edges and accurate thread profiles The 1404‑D67 geometry provides a reliable thread form and consistent chip segmentation, which reduces the risk of built‑up edge and dimensional drift. Stable cutting edges lower the incidence of surface defects and thread discrepancies, so operators see fewer rejects and less post‑machining correction. By converting geometric precision into measurable time savings, the insert supports predictable cycle times and a more economical production flow. Broad material compatibility for versatile use Marked for ISO M and ISO S groups, the insert is suited to rostfreier Stahl (M) and heat‑resistant superalloys and titanium (S). The grade’s microstructure and coating balance toughness and hardness to cope with the toughness of rostfreier Stahl and the thermal demands of superalloys. Clear identification of compatible groups simplifies tool selection and reduces set‑up risk in mixed‑material workshops, supporting stable chip control and repeatable results across varied workpieces. Practical benefits and process reliability in daily use Designed for productive machining, the insert offers a compromise between tool life and cutting performance that favours extended productive runs. Reduced edge wear and consistent chip formation translate into improved productivity and predictable maintenance intervals. For applications where reproducible thread accuracy and dependable tool life are priorities, this solution helps maintain uptime and lowers total machining cost through fewer interventions and stable component quality. For process recommendations or to confirm suitability for a specific rostfreier Stahl grade with Walter Tools’ Tiger·tec Gold technology, contact Metav Werkzeuge for expert advice and stock information via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: P26300-1404-D67-WSM37G-WALTER ISO designation: P26300-1404-D67 WSM37G Product type: Threading insert Facts Grade / series: WSM37G / Tiger·tec Gold Geometry: 1404-D67 Material groups: ISO M, ISO S Special features Coating: Tiger·tec Gold (coated cemented carbide) Application: rostfreier Stahl, heat‑resistant superalloys, titanium Sort description: coated carbide grade optimised for hard‑to‑cut materials FAQ What materials is this insert best suited for? The P26300-1404-D67 WSM37G insert is intended for rostfreier Stahl and heat‑resistant superalloys (ISO M and ISO S), with the WSM37G grade and Tiger·tec Gold coating tuned for tough cutting conditions. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold on the WSM37G grade reduces friction and improves thermal resistance, which helps maintain cutting‑edge integrity and consistent thread quality in demanding rostfreier Stahl and superalloy applications. What does the geometry code 1404‑D67 indicate? The 1404‑D67 code defines the insert’s thread form and chip‑breaking characteristics; this geometry provides reliable thread accuracy and controlled chip formation for secure machining. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory‑new goods of the manufacturer Walter Tools.
P26300-2204-D61 WSM37G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Gold coating and the WSM37G grade for stable cutting in demanding materials; reliable chip control and extended tool life allow for more productive machining and lower rework rates. Order directly via Metav Werkzeuge or consult their technical advisors for application matching. P26300-2204-D61 WSM37G Threading Insert — Tiger‑tec Gold for rostfreier Stahl and superalloys (Walter Tools) The P26300-2204-D61 WSM37G is a coated threading insert designed for heavy-duty machining of rostfreier Stahl and heat-resistant superalloys, providing thermal stability and consistent edge life. Tiger‑tec Gold coating for thermal stability and wear resistance WSM37G grade optimised for difficult-to-cut materials Chipbreaker 2204‑D61 for controlled chip formation Designed for rostfreier Stahl and superalloys Stable cutting performance in demanding materials The Tiger‑tec Gold coating together with the WSM37G carbide grade delivers thermal stability and improved resistance to abrasive and adhesive wear when processing rostfreier Stahl and superalloys. These material combinations generate high temperatures and tend to form built-up edge; the coating technology reduces friction at the cutting edge and helps maintain a predictable tool life. As a result, the insert supports consistent cycle times and fewer interruptions for tool changes, which is beneficial for medium- to large-batch production. Predictable chip control and thread quality An optimised chipbreaker design — the 2204‑D61 — focuses on controlled chip formation during thread cutting. Controlled chips reduce the risk of workpiece damage and minimise secondary operations. The insert geometry is tuned to produce reliable thread form accuracy and surface finish in challenging materials, lowering the probability of rework and enhancing first-pass yield. This predictability supports tighter process windows and a more efficient machining flow. Economic advantages through longer life and process security The combination of grade and coating provides higher resistance to edge degradation, which extends tool life under strenuous cutting conditions. Longer life and fewer interruptions translate into lower tooling consumption per part and a reduced total cost of ownership over time. The insert is particularly suitable where machining stability and repeatable performance are priorities, offering a balance of productivity and tool economy that suits job shops and production environments alike. Application guidance and integration into existing processes The insert is intended for threading operations on rostfreier Stahl and superalloys (ISO groups M and S). When paired with appropriate tool holders and optimised cutting data, the insert supports steady chip evacuation and reliable mating of thread flanks. Technical advisors can assist with recommended feeds, speeds and coolant strategies to adapt the insert to specific machine and fixture setups and to ensure process robustness. Contact Metav Werkzeuge for tailored advice on implementing the Walter Tools Tiger‑tec Gold WSM37G insert in production and to arrange precise holder and parameter recommendations Technical data SKU: P26300-2204-D61-WSM37G-WALTER Article: P26300-2204-D61 WSM37G Product type: Threading insert Brand: Walter Tools Series: Tiger‑tec Gold Grade: WSM37G Chipbreaker: 2204‑D61 Material groups: S / M Core data Applicable to ISO material groups: M (rostfreie Stähle), S (superalloys / titanium) Coating technology: Tiger‑tec Gold Substrate: Coated carbide Special features Designed for heavy-duty and difficult-to-cut materials Improved thermal stability for extended edge life Optimised chip control for consistent thread form Suitable for industrial thread-cutting applications FAQ Is this threading insert suitable for rostfreier Stahl? Yes. The P26300-2204-D61 WSM37G from Walter Tools is specifically formulated for ISO group M materials, offering secure chip formation and edge stability when machining rostfreier Stahl. What does the WSM37G designation indicate? WSM37G is the Walter Tools grade within the Tiger‑tec Gold series; it denotes a coated carbide formulation optimised for heat resistance and toughness in demanding applications. Which chipbreaker is included and why does it matter? The insert uses the 2204‑D61 chipbreaker, engineered to produce short, controllable chips during thread cutting, which helps to protect thread flanks and support consistent surface quality. For which component groups is this insert recommended? The insert is recommended for threading operations in rostfreier Stahl and heat-resistant superalloys (ISO groups M and S), where thermal stability and secure edge life are required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Walter Tools is mentioned for product identification purposes only; no affiliation with the seller is implied. The offered article is original, brand-new merchandise of the manufacturer.
P26310-06G14-D61 WSM37G WSM37G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WSM37G grade for secure chip formation and extended tool life when machining demanding materials; order directly via Metav Werkzeuge or consult the technical team for application-specific guidance. P26310-06G14-D61 WSM37G threading insert – Tiger·tec Gold coated carbide for rostfreier Stahl and superalloys (Walter Tools) P26310-06G14-D61 WSM37G is a high-performance threading insert designed for precision thread production in difficult-to-machine alloys Tiger·tec Gold coating for heat resistance Optimised for rostfreier Stahl machining Coated carbide grade WSM37G for stable edges Effective chip control with 06G14‑D61 breaker Stable cutting in demanding alloys for predictable production The combination of the Tiger·tec Gold coating and the WSM37G grade delivers a balance of heat resistance and edge stability that is essential when machining rostfreier Stahl and heat-resistant superalloys. The coated carbide substrate reduces the tendency for built-up edge and supports consistent cutting conditions over longer cycles, which lowers process variability. For production environments where repeatability and minimal scrap are priorities, the engineered wear characteristics of the grade contribute directly to predictable tool life and reduced interventions at the machine. Consistent thread form and improved chip control for reliable finishing Thread quality depends on geometry and chip evacuation. The 06G14‑D61 chipbreaker geometry is tailored to provide controlled chip segmentation and evacuation, improving surface integrity and reducing the risk of thread distortion. With controlled chip formation, cycle times stay stable and rework is minimised. The insert’s geometry supports a clean flank finish and reliable pitch accuracy, which helps maintain assembly tolerances in serial production and improves overall process yields. Reduced downtime and lower overall machining costs through longer tool life Using a grade optimised for difficult materials yields measurable efficiency gains: fewer insert changes, less machine idle time and more predictable maintenance windows. The coated carbide construction and the protective Tiger·tec Gold layer extend usable life under elevated temperatures and abrasive conditions common with rostfreier Stahl and superalloys. These effects translate into improved per-thread cost and a clearer return on tooling investment, particularly in mixed-batch and continuous production scenarios where process security and uptime are decisive performance indicators. Application scope and selection guidance for safe integration The insert is specified for material groups S and M (heat-resistant superalloys, titanium and rostfreier Stahl) and is intended for operations where thermal load and edge wear are significant factors. Selection of feed, speed and coolant strategy should follow the workshop’s validated parameters for these groups; if uncertainties remain, Metav Werkzeuge’s consultants can advise on adaptations for holder type, thread profile and process strategy. With appropriate setup, this threading insert supports reproducible results across a broad range of demanding machining tasks. For tailored recommendations on integrating Walter Tools threading inserts into production, contact Metav Werkzeuge to review the P26310-06G14-D61 WSM37G application and machining parameters Technical Data Article number: P26310-06G14-D61-WSM37G-WALTER Designation: P26310-06G14-D61 WSM37G Type: threading insert Brand: Walter Tools Series: Tiger‑tec Gold Facts Material groups: S / M Grade: WSM37G Chipbreaker: 06G14‑D61 SKU: P26310-06G14-D61-WSM37G-WALTER Special features Tiger·tec Gold coating Coated carbide (Hartmetall) Optimised for rostfreier Stahl and superalloys Stable cutting edge and controlled chip formation FAQ Which materials are suitable for this insert? The P26310-06G14-D61 WSM37G threading insert is designed for machining rostfreier Stahl and heat‑resistant superalloys (material groups S and M), offering thermal resistance and stable cutting behaviour. How does the 06G14‑D61 chipbreaker affect thread quality? The 06G14‑D61 geometry promotes controlled chip segmentation and evacuation, improving thread flank finish and reducing the likelihood of thread distortion during the Walter Tools threading process. Is this insert compatible with standard threading holders? The insert fits holders specified for the P26310‑06G14‑D61 designation; compatibility with existing toolholders should be confirmed against the holder’s clamping and indexation requirements before first use. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating enhances heat resistance and reduces wear on the coated carbide substrate, extending insert life and supporting consistent cutting when machining demanding alloys. When should consultation be sought before choosing this insert? Consultation is recommended for atypical thread forms, very hard or unusual alloys, or when integrating the insert into new production processes; Metav Werkzeuge can assist with parameter selection and trial planning. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, brand-new article of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
P26310-09G11-D61 WSM37G Wendeplatten - Walter Tools
Take advantage of the combination of advanced Tiger·tec Gold coating, a geometry optimised for chip control and the suitability for stainless steels and heat‑resistant alloys to keep threading processes consistent and productive. Order the insert directly via Metav Werkzeuge or consult the team for cutting data and application advice. P26310-09G11-D61 WSM37G threading insert — Tiger·tec Gold, suited for stainless and superalloys — Walter Tools The P26310-09G11-D61 WSM37G is a coated carbide threading insert from Walter Tools, engineered for reliable performance when machining stainless steels and heat‑resistant superalloys in demanding production environments Tiger·tec Gold coating for long tool life Designed for stainless steel and superalloys Stable cutting edge under high thermal load Coated carbide for consistent chip control Consistent chip control for demanding materials The insert’s 09G11‑D61 chipbreaker and the WSM37G grade form a system that prioritises consistent chip control when tackling materials classified under ISO 513 as M and S. For stainless steels, which tend to produce built‑up edge and retain heat, the geometry reduces adhesion and promotes predictable chip evacuation. For superalloys and heat‑resistant materials, the design limits deformation at the cutting zone, helping to maintain dimensional integrity of threads and reducing the frequency of edge failures. Extended tool life through advanced coating technology The combination of a coated carbide substrate and the Tiger·tec Gold coating improves wear resistance and thermal stability, which translates into longer service intervals on the toolholder. The coating supports a stable cutting edge under elevated temperatures, so thread quality remains consistent over longer runs. This leads to fewer tool changes and less unplanned downtime, supporting a more economical machining cycle without sacrificing surface finish or thread accuracy. Predictable productivity and process reliability In production settings where repeatability matters, the insert’s properties deliver measurable process benefits: reduced scrap, consistent thread form and longer indexable life. The grade’s balance between toughness and wear resistance helps to avoid premature chipping during interrupted cuts or variable feeds. As a result, workshop throughput becomes more predictable and setup validation times are shortened, supporting higher overall equipment effectiveness and dependable batch outcomes. Practical application and handling advantages The insert is supplied in the Tiger·tec Gold series and is intended for use where stainless steels and heat‑resistant superalloys are present; its 09G11‑D61 chipbreaker is tuned to promote stable chip formation and straightforward tool management. Toolroom and production engineers will appreciate the reduced need for corrective passes and the improved surface integrity of threaded components. For parameter selection and clamping recommendations, reference cutting data from Walter Tools or consult Metav Werkzeuge for optimisation to the specific machine and material combination. Contact Metav Werkzeuge for tailored cutting data, availability and to source Walter Tools threading inserts with Tiger·tec Gold technology. Technical Data Article number: P26310-09G11-D61-WSM37G-WALTER Designation: P26310-09G11-D61 WSM37G Product type: threading insert Manufacturer: Walter Tools Series: Tiger·tec Gold Chipbreaker: 09G11-D61 Grade: WSM37G Material groups: S / M Facts ISO material groups: M (stainless steels), S (heat‑resistant superalloys) Coating technology: Tiger·tec Gold Substrate: coated cemented carbide Intended application: thread cutting Special features Coated cemented carbide for thermal stability Optimised chipformer for consistent chips Stable cutting edge for reduced edge wear Suitable for stainless steels and superalloys FAQ What materials is this threading insert suitable for? The P26310-09G11-D61 WSM37G threading insert is designed for stainless steels (ISO group M) and heat‑resistant superalloys (ISO group S), delivering stable cutting performance in both families. What makes the Tiger·tec Gold series beneficial for threading? The Tiger·tec Gold coating on the WSM37G grade increases thermal resistance and wear protection, which helps maintain a stable cutting edge during thread turning and reduces the need for premature index changes. How does the 09G11‑D61 chipbreaker affect machining? The 09G11‑D61 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of built‑up edge and improving surface integrity of the produced threads. Can this insert improve overall process reliability? Yes, the WSM37G grade combined with the Tiger·tec Gold coating contributes to longer tool life and more predictable thread quality, which supports higher process reliability in production environments. Is this product offered as original Walter Tools stock? The article is listed as an original, new insert from Walter Tools and intended for industrial threading applications. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article consists of original, factory‑new products from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com