SDMT09T308-F57 WKP35G Wendeplatten - Walter Tools
Take advantage of the proven Tiger‑tec Gold coating and the WKP35G grade to maintain cutting-edge productivity in milling operations; the square 90° geometry with a 0.8 mm corner radius and 15° relief angle delivers stable cuts and consistent chip control. Order inserts via Metav Werkzeuge or consult their technical team for process parameters and availability. SDMT09T308-F57 WKP35G milling indexable insert – for steel and cast iron, Walter Tools SDMT09T308-F57 WKP35G is a square 90° milling indexable insert with Tiger‑tec Gold coating, designed for productive machining of steel and cast iron in a wide range of operations Tiger‑tec Gold coating for high wear resistance WKP35G grade for steel and cast iron machining Square 90° geometry with 0.8 mm corner radius 15° relief angle for stable cutting performance Chipbreaker F57 for controlled chip formation Increase throughput with durable coating and proven grade The combination of the Tiger‑tec Gold coating and the WKP35G cutting grade reduces flank and crater wear, translating into longer tool life and fewer insert changes during production. This coated carbide specification is optimised for the heat and chip behaviour typical of steel and cast iron, enabling higher cutting speeds where appropriate and a more predictable tool-change cadence. The result is measurable productivity gains and improved machine uptime. Achieve consistent surface finish and edge stability The insert’s square 90° geometry together with a 0.8 mm corner radius and a 15° relief angle provides a balance between edge strength and form accuracy. A moderate corner radius limits edge chipping under interrupted cuts, while the relief angle supports stable chip flow and reduces rubbing on the flank. These geometric choices contribute directly to consistent surface quality and repeatable dimensional results across batch production. Practical guidance for machining and chip control Equipped with chipbreaker F57, the insert controls chip formation for both continuous and semi‑continuous chip types commonly encountered in P (steel) and K (cast iron) materials. The size 09 and T3 thickness enable secure clamping in standard milling cutter bodies, while tolerance class M ensures consistent seat fit and interchangeability. For process optimisation, consider matching coolant strategy and cutting speed to the workpiece alloy and hardness to exploit the coated grade’s strengths. A reliable choice for demanding production environments Produced under the Walter Tools family, this insert suits workshops seeking a robust, repeatable solution for mixed steel and cast iron work. The product’s design focuses on predictable wear behaviour and efficient chip control, supporting both roughing and finishing passes where stability is essential. With its combination of geometry and cutting material, the insert supports sustained production with reduced rework and stable surface quality. Contact Metav Werkzeuge for tailored application advice and stock information on SDMT09T308-F57 WKP35G inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss process parameters and immediate supply Technical data Article number: SDMT09T308-F57-WKP35G-WALTER Designation: SDMT09T308-F57 WKP35G Series: Tiger‑tec Gold Grade: WKP35G Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 0.8 mm Plate form: Square 90° Plate size: 09 Thickness: T3 Tolerance class: M Special features Coated carbide (Tiger‑tec Gold) Chipbreaker: F57 Material applications: steel, cast iron Suitable for a range of milling operations Stable cutting edge and wear resistance FAQ Which materials are recommended for this insert? The SDMT09T308-F57 WKP35G insert is specified for machining steel (P) and cast iron (K) according to the grade characteristics and Tiger‑tec Gold coating. What are the key geometry specifications to note? Key dimensions are a square 90° form, 0.8 mm corner radius, 15° relief angle, size 09, thickness T3, and tolerance class M for consistent seating. What chip control can be expected? The chipbreaker F57 on this insert is designed to promote controlled chip formation across continuous and semi‑continuous chip types typical for steel and cast iron machining. Is this insert suitable for finishing or roughing? The geometry and grade make the insert versatile for both roughing and semi‑finishing operations; final selection should consider workpiece alloy, required surface finish and cutting parameters. Does the grade include a coating and what are its benefits? Yes — the Tiger‑tec Gold coating on the WKP35G grade improves wear resistance and thermal stability, supporting longer tool life and more consistent performance across production runs. Manufacturer: Walter Tools; Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered marks are used solely for descriptive purposes. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product of the respective manufacturer.
SDMT09T308-F57 WKP35S Wendeplatten - Walter Tools
The combination of a Tiger‑tec Silver coated carbide grade, a 15° clearance angle and an optimised F57 chipbreaker delivers reliable chip control and long edge life for productive machining of steel and cast iron; benefit from consistent performance and predictable tool wear. Order the SDMT09T308-F57 WKP35S directly via Metav Werkzeuge or consult the technical advisors for cutting data and application support. SDMT09T308-F57 WKP35S – Milling indexable insert (Tiger‑tec Silver) for Steel & Cast Iron by Walter Tools The SDMT09T308-F57 WKP35S is a square 90° milling indexable insert engineered for high-productivity roughing and finishing of steel and cast iron, combining a coated carbide grade with a chipbreaker tuned for stable swarf formation Tiger·tec Silver coated carbide grade WKP35S 15° clearance angle for positive cutting geometry 0.8 mm corner radius for improved edge strength Optimised F57 chipbreaker for stable chip control Consistent chip control for uninterrupted production The insert’s F57 chipbreaker is designed to shape and evacuate chips reliably during milling, reducing the risk of re-cutting and tool interruption. In practice, a well-matched chipbreaker minimises built-up edge and prevents long, stringy swarf from tangling in the cutter, which improves cycle stability. Reliable chip control translates directly into fewer machine stops and more predictable batch throughput for shops prioritising uptime and process repeatability. Coating and grade engineered for steel and cast iron The Tiger‑tec Silver coating combined with the WKP35S grade gives a balanced solution for the ISO groups P and K, i.e. steel and cast iron. Coated carbide reduces flank and crater wear by improving thermal resistance and hardness at the cutting edge; for the end user this means longer intervals between index changes and a better total cost of ownership. Where abrasive cast iron or heat-prone steels are machined, the coated grade helps maintain a stable cutting edge under variable cutting conditions. Geometry and edge design that boost edge life A 15° clearance angle and a 0.8 mm corner radius create a robust cutting geometry that resists chipping while maintaining favourable cutting forces. The modest corner radius distributes cutting loads across a larger area of the edge, improving resistance to mechanical shock during interrupted cuts. For shoulder milling and face operations, the square 90° format delivers predictable plunge and step-over behaviour, allowing process engineers to set feeds and depths with confidence. Integration into the toolchain and practical advantages The insert is specified as SDMT09T308‑F57 in ISO format and uses a T3 plate thickness in size 09, making it compatible with standard indexable milling cutters designed for square inserts. Its execution and tolerance class M support consistent repeatability in production series. By pairing the insert with the correct cutter body and clamping torque, workshops gain a reliable, serviceable solution that supports both roughing and semi-finishing operations, reducing the need for frequent requalification of tool settings. For productive milling with the Walter Tools Tiger‑tec Silver WKP35S grade, contact Metav Werkzeuge for tailored cutting data and ordering assistance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SDMT09T308-F57-WKP35S-WALTER Label: Fräswendeschneidplatte SDMT09T308-F57 WKP35S Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Facts Clearance angle: 15° Corner radius: 0.8 mm Plate form: Square 90° Plate size: 09 Plate thickness: T3 Chipbreaker: F57 Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WKP35S (coated carbide) Material applicability: Steel (P), Cast iron (K) Execution: T ISO designation: SDMT09T308-F57 WKP35S FAQ What materials is this insert suitable for? The SDMT09T308-F57 WKP35S is designed for ISO groups P and K, making it suitable for machining steel and cast iron in a range of production applications. How does the F57 chipbreaker affect machining? The F57 chipbreaker promotes short, controllable chips and reliable evacuation, which reduces the risk of chip-related interruptions and contributes to steady machining performance with the Walter Tools insert. Is the insert suitable for finishing as well as roughing? Yes; the combination of the 0.8 mm corner radius and Tiger‑tec Silver coating provides a compromise between edge strength and surface finish, allowing use in both heavy and semi-finishing operations when set up appropriately. Which cutter bodies are compatible with this ISO designation? The insert follows the ISO-style designation SDMT09T308‑F57 and fits standard milling cutters specified for square 90° inserts of size 09 and T3 thickness; selection of the correct body and clamping ensures repeatable performance. How does the Tiger‑tec Silver coating influence tool life? Tiger‑tec Silver enhances thermal and abrasive resistance at the cutting edge, typically extending edge life compared with uncoated grades and stabilising wear behaviour on both steel and cast iron. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
SDMT09T308-F57 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, robust WPP35G grade and optimised chip control for steady, economical milling of steel; order through Metav Werkzeuge or contact the consultants for specific cutting-data advice. SDMT09T308-F57 WPP35G – Milling indexable insert (Square 90°, 15° relief) by Walter Tools A SDMT09T308-F57 WPP35G milling indexable insert engineered for efficient steel machining with Tiger‑tec Gold coating and optimised chip control in medium to heavy milling applications Tiger‑tec Gold coated carbide grade WPP35G Optimised chip control F57 15° relief angle for robust cutting Square 90° form with 0.8 mm corner radius Consistent performance for steel machining The insert is based on the WPP35G coated carbide technology, which is designed for the thermal and mechanical demands of steel cutting. Because the grade combines wear resistance with toughness, the insert sustains consistent cutting edges under varying cutting speeds; this reduces uncontrolled flank wear and supports predictable tool-change intervals. The Tiger‑tec Gold coating contributes to reduced adhesion and improved heat resistance, so surface finish is stabilised and tool life is extended when compared with uncoated alternatives. Stable cutting and superior chip management With an integrated F57 chipbreaker and a 15° relief angle, the geometry directs and breaks chips reliably in typical steel machining scenarios. The square 90° form and 0.8 mm corner radius provide a compromise between strength and edge sharpness, offering good load-bearing capacity for interrupted cuts and the ability to maintain dimensional accuracy over longer runs. As a result, machining processes benefit from fewer interruptions for rework and improved component quality. Practical integration and productive handling The insert’s T3 thickness and standardised ISO designation allow straightforward insertion into a wide range of milling cutter bodies, enabling fast indexing and simple inventory management. Because the grade is aimed primarily at steel applications, cutters can be stocked for predictable production mixes, supporting efficient tool logistics. Advice and cutting data can be provided to align machining parameters with material grade and machine capability, ensuring that milling operations are both productive and reliable. Contact Metav Werkzeuge for tailored cutting-data sheets and application recommendations for Walter Tools Tiger‑tec Gold inserts, or request a quotation for immediate supply. Technical data Article number: SDMT09T308-F57-WPP35G-WALTER Manufacturer: Walter Tools Product type: Fräswendeschneidplatte / milling indexable insert ISO designation: SDMT09T308-F57 WPP35G Series: Tiger‑tec Gold Grade: WPP35G Chipbreaker: F57 Form: Square 90° Size: 09 Thickness: T3 Corner radius: 0.8 mm Relief angle: 15° Tolerance class: M Execution: T Facts Relief angle: 15° Corner radius: 0.8 mm Plate size: 09 Thickness: T3 Form angle: 90° Tolerance class: M Special features Coating: Tiger‑tec Gold Material: Coated carbide Suitability: Steel (P) Application: Milling indexable insert Optimised chip control with F57 chipbreaker FAQ What materials is this insert suitable for? The SDMT09T308-F57 WPP35G insert is specified for steel (P) applications; the WPP35G grade and Tiger‑tec Gold coating are optimised for the thermal and chip-formation behaviour typical of steel machining. How does the F57 chipbreaker affect performance? The F57 chipbreaker is designed to produce short, controllable chips in common milling conditions, improving surface finish and reducing the risk of chip entanglement when using the SDMT09T308-F57 WPP35G insert. Can this insert be used for interrupted cuts? Yes, the square 90° form combined with a 0.8 mm corner radius and 15° relief angle provides robust edge strength that is well suited to interrupted cuts and demanding milling operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMT09T308-F57 WSM35G WSM35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the F57 chipbreaker and a robust 15° clearance to ensure stable cutting edges and reliable chip control in demanding materials; order the insert directly via Metav Werkzeuge or consult the experts for application-specific advice. SDMT09T308-F57 WSM35G indexable milling insert — Tiger·tec Gold for stainless steels and superalloys (Walter Tools) SDMT09T308-F57 WSM35G is an indexable milling insert engineered for heavy-duty and heat-generating applications, optimised for machining stainless steels and heat-resistant superalloys and titanium. Tiger·tec Gold coated for heat resistance Optimised F57 chipbreaker for secure chip control 15° clearance with 0.8 mm corner radius Square 90° form for versatile milling Consistent cutting performance in demanding alloys The Tiger·tec Gold coating combined with the WSM35G grade is designed to offer enhanced wear resistance and thermal stability when machining tough alloys. The insert’s F57 chipbreaker promotes predictable chip formation, reducing the risk of built-up edge and improving surface finish. With a 15° clearance angle and 0.8 mm corner radius, the geometry balances edge strength and cutting aggressiveness, allowing stable engagement in applications governed by ISO groups M (stainless steels) and S (superalloys / titanium). This results in longer tool life and fewer interruptions for tool changes, which supports continuous production. Robust geometry for adaptable milling strategies The square 90° plate form and T3 plate thickness provide mechanical stability for a variety of milling operations, from ramping to shoulder passes. The insert’s design supports straightforward indexing and repeatable positioning in standard toolholders, simplifying tool management on the shop floor. The optimised chip control reduces vibration and heat concentration, which helps maintain dimensional consistency and reduces rework. Where inserts are subject to heavy thermal and mechanical loads, this combination of form and grade contributes to predictable tool behaviour and process reliability. Reduced tooling costs through extended edge life and process security Selecting the SDMT09T308-F57 WSM35G insert aligns wear resistance with secure chip evacuation, yielding economic benefits through fewer indexings and replacements. The coated hardmetal grade is particularly suited to components prone to adhesion and high cutting temperatures, delivering stable cutting edges over longer runtimes. Walter Tools’ focus on precision tooling and process stability means the insert is a practical choice for production environments that demand repeatable surface quality and consistent cycle times across batches. Contact Metav Werkzeuge for tailored recommendations and availability at info@metav-werkzeuge.com or +49 2822 7131930 — consultants will advise on the most suitable Tiger·tec Gold grade and geometry for the application Technical Data Article number: SDMT09T308-F57-WSM35G-WALTER SKU: SDMT09T308-F57-WSM35G-WALTER Product type: Fräswendeschneidplatte (indexable milling insert) Brand: Walter Tools Series: Tiger·tec Gold Facts Clearance angle: 15° Corner radius: 0.8 mm Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Grade: WSM35G Chipbreaker: F57 Material group suitability: S / M Typical applications: stainless steels (M), superalloys and titanium (S) FAQ Is this insert suitable for stainless steels? The SDMT09T308-F57 WSM35G insert is specified for stainless steels (ISO group M) and is formulated to support secure chip formation and thermal stability when machining these alloys. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WSM35G grade enhances wear resistance and heat tolerance, which prolongs edge life and improves process stability in demanding materials. Which geometries and operations benefit most from this insert? The square 90° form and 0.8 mm corner radius are well suited to shoulder milling and general face-milling operations where a balance of strength and cutting freedom is required. Can this insert handle superalloys and titanium? Yes — the material group designation S indicates suitability for heat-resistant superalloys and titanium, with the grade engineered for thermal and edge stability under high cutting stresses. How does the F57 chipbreaker affect machining? The F57 chipbreaker is optimised for controlled chip formation, reducing the risk of tangled chips and promoting consistent surface quality and tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMT09T308-F57 WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of the combination of a WSM45X coated carbide grade, an optimised F57 chipbreaker, and a robust square geometry for steady machining of stainless steel and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult our specialists for process advice. SDMT09T308‑F57 WSM45X milling insert — square 90°, 15° clearance — Walter Tools SDMT09T308‑F57 WSM45X is a square 90° milling insert designed for secure machining of stainless steel and heat‑resistant superalloys in demanding milling operations WSM45X coated carbide grade for toughness Optimised F57 chipbreaker for stable chips Square 90° insert with 0.8 mm corner radius 15° clearance angle for improved edge life Predictable cutting performance on challenging materials The WSM45X grade is a coated carbide developed for machining stainless steel and heat‑resistant superalloys (ISO material groups M and S). The grade emphasises stable chip formation and edge resistance, which reduces the tendency for built‑up edge under elevated temperatures and adhesive wear. For production environments this translates into more consistent component quality and fewer unscheduled tool changes. The insert’s chip control geometry supports repeatable results across variable feed rates, making it suitable for a wide range of milling strategies where material behaviour is tough and thermal loads are high. Geometry that balances strength and surface finish A square 90° shape combined with a 0.8 mm corner radius provides a robust cutting edge with good versatility between positional milling and light slotting. The 15° clearance angle lowers cutting forces at the approach while maintaining a secure cutting zone, and the F57 chipbreaker is optimised to form controllable chips in ductile, adhesive materials. Together these design choices extend tool life and support steady surface integrity, enabling operators to achieve consistent finishes without excessive tool intervention. The plate thickness T3 improves insert stability in the pocket, reducing vibration sensitivity in interrupted cuts. Process security and shopfloor benefits The insert supports process‑oriented production: its composition and geometry reduce the risk of edge chipping and thermal damage when machining difficult alloys. This leads to lower scrap rates and improved machine utilisation. In serial production the combination of a coated carbide grade and an efficient chipbreaker provides economic advantages by lengthening tool change intervals and stabilising cycle times. For engineers seeking predictable performance, the insert offers a balance of productivity and reliability, suitable for workshops that prioritise consistent throughput with minimum rework. Practical application notes for integration The insert suits medium to heavy milling passes in stainless steel and nickel‑based or titanium alloys, depending on the chosen cutter body and cutting parameters. When replacing an existing grade, adjustments to cutting speed and feed per tooth may be needed to exploit the WSM45X heat resistance and wear properties; conservative initial settings are recommended to establish steady chip shapes with the F57 breaker. Toolholders with secure clamping and minimal runout enhance the insert’s performance, preserving edge life and surface finish in production cycles. Contact Metav Werkzeuge today for tailored machining recommendations on Walter Tools inserts with WSM45X grade and to arrange a process review with our technical consultants Technical data Article number: SDMT09T308-F57-WSM45X-WALTER Designation: SDMT09T308-F57 Grade: WSM45X Brand: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts Insert shape: Square 90° Corner radius: 0.8 mm Clearance angle: 15° Chipbreaker: F57 Insert size: 09 Thickness: T3 Tolerance class: M Execution: T Special features Coated carbide cutting grade Material groups: S / M (superalloys/titanium and stainless steel) Optimised chip control geometry Robust cutting edge for heavy milling FAQ What materials is this insert suited for? The SDMT09T308‑F57 WSM45X insert is intended for stainless steel and heat‑resistant superalloys (ISO groups M and S), offering thermal resistance and stable chip formation for these materials. How does the F57 chipbreaker affect machining? The F57 chipbreaker on this insert promotes controlled chip formation in ductile and adhesive materials, improving process stability and reducing the risk of built‑up edge during milling. Can this insert be used for slotting and face milling? Yes, the square 90° geometry with a 0.8 mm corner radius provides the strength for slotting and the versatility for face milling, though cutting parameters should be adapted to the material and machine dynamics. Which benefits does the WSM45X grade provide in production? The WSM45X coated carbide grade delivers enhanced edge stability and wear resistance under thermal load, resulting in longer tool life, fewer tool changes and more consistent part quality. Is the insert compatible with standard toolholders? The insert fits standard cutter bodies designed for SDMT‑style inserts; accurate clamping and low runout are recommended to realise the plate’s full performance. Manufacturer/Responsible: Walter Tools (brand of Walter AG, part of the Sandvik Group); AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
SDMT09T308-F57 WSP45G Wendeplatten - Walter Tools
Take advantage of the proven Tiger·tec Gold combination and the WSP45G grade for stable chip formation and extended tool life; the insert’s 15° relief and 0.8 mm corner radius provide repeatable edge strength in demanding milling operations. Order directly via Metav Werkzeuge or consult our specialists for application guidance. SDMT09T308-F57 WSP45G milling indexable insert — Tiger·tec Gold, Walter Tools, square 90° form, 15° relief The SDMT09T308-F57 WSP45G is a square 90° milling indexable insert designed for versatile PVD-coated carbide milling of steel, stainless steel and heat-resistant superalloys and titanium, offering robust edge stability for interrupted cuts and finish passes. Tiger·tec Gold PVD technology Suitable for steel, stainless steel, superalloys 15° relief angle for secure cutting 0.8 mm corner radius for edge strength Consistent performance across demanding materials The combination of the WSP45G grade and Tiger·tec Gold PVD technology delivers a balance of toughness and wear resistance that is optimised for milling tasks in groups P, M and S. This means reliable chip control when machining unalloyed and alloyed steel, a reduced tendency for built-up edge in stainless steel, and improved thermal stability for heat-resistant superalloys and titanium. The coating strategy supports longer tool life and fewer insert changes, directly contributing to more predictable cycle times and lower overall process costs. Geometry that improves productivity and surface quality With a square 90° form, 15° relief and a 0.8 mm corner radius, the insert provides a sturdy cutting edge that resists chipping during heavy engagement or interrupted cuts. The F57 chipbreaker is tuned to promote controlled chip formation across a wide range of cutting parameters, reducing rework and machine downtime. For workshops seeking a simple, robust solution, this geometry offers an excellent compromise between roughing capability and surface finish, so fewer tool types are needed for mixed workloads. Practical application and handling benefits The insert’s PVD-coated carbide substrate and medium tolerance class ensure interchangeability and consistent seating in toolholders, supporting reliable repeatability in series production. The design is appropriate for common milling operations where a blend of durability and surface integrity is required. For teams new to the grade, basic machining adjustments — modest reductions in cutting speed for high-alloy materials and monitoring feed for stainless steel — will rapidly reveal the insert’s performance advantages and enable immediate gains in productivity. Choose Walter Tools Tiger·tec Gold inserts like the SDMT09T308-F57 WSP45G for dependable milling performance — contact Metav Werkzeuge for detailed application advice or to discuss cutting data at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: SDMT09T308-F57-WSP45G-WALTER Designation: SDMT09T308-F57 ISO designation: SDMT09T308-F57 WSP45G Grade: WSP45G Facts Relief angle: 15° Corner radius: 0.8 mm Plate form: Square 90° Plate size: 09 Thickness: T3 Chipbreaker: F57 Tolerance class: M Special features Series: Tiger·tec Gold Coating: PVD (Tiger·tec Gold) Substrate: Coated carbide Material groups: Steel (P), Stainless steel (M), Superalloys/Titanium (S) Execution: T FAQ What materials is this insert suitable for? The SDMT09T308-F57 WSP45G insert is suitable for machining steel, stainless steel and heat-resistant superalloys or titanium, reflecting the P/M/S designation of the grade. How does the Tiger·tec Gold coating benefit milling operations? Tiger·tec Gold PVD coating on the WSP45G grade improves wear resistance and thermal stability, which extends the effective tool life of the SDMT09T308-F57 under mixed milling conditions. Which chipbreaker is fitted and what is its purpose? The insert uses the F57 chipbreaker, which promotes controlled chip formation and evacuation to reduce re-cutting and improve process reliability with varied feed rates. Is the insert suitable for interrupted cuts and heavy engagement? Yes, the square 90° geometry combined with a 0.8 mm corner radius provides edge robustness that helps withstand interrupted cuts and heavier engagements during milling. What tolerance and thickness should toolholders expect? The insert is manufactured to tolerance class M and thickness T3, ensuring consistent seating and repeatability when used with compatible toolholders. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are cited exclusively for explanatory purposes. There is no affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, factory-new product of the manufacturer.
SDMT09T312-F57 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger-tec Gold coating, the WKP35G grade and robust geometry for consistent, high-productivity milling of steel and cast iron. Order the SDMT09T312-F57 WKP35G insert directly via Metav Werkzeuge or ask our consultants if needed. T SDMT09T312-F57 WKP35G milling insert, Tiger-tec Gold coating — Walter Tools T SDMT09T312-F57 WKP35G is a square indexable milling insert designed for precision machining of steel and cast iron, optimised for stable chip control and long tool life. Tiger-tec Gold coating for high process security WKP35G grade for steel and cast iron machining 15° clearance angle for stable cutting forces 1.2 mm corner radius for accurate edge strength Increased productivity through optimised grade and coating The WKP35G grade combined with Tiger-tec Gold coating is engineered to deliver improved wear resistance and consistent cutting performance when machining steel and cast iron. This combination reduces flank wear and maintains a stable cutting edge over longer periods, which leads to fewer insert changes and shorter non-productive times. For shops seeking a reliable balance between economy and performance, the grade’s tailored microstructure and multilayer coating technology particularly benefit medium to high cutting speeds. Clear machining benefits from geometry and chip control A 15° clearance angle and a 1.2 mm corner radius create a geometry that favours stable chip flow and robust edge strength. The F57 chipbreaker is configured to produce controlled chips for interrupted or continuous cuts, reducing the risk of built-up edge and improving surface integrity. For operators less familiar with insert geometry: the clearance angle helps prevent rubbing on the workpiece, while the corner radius determines both corner strength and achievable surface quality—larger radii increase robustness, smaller radii improve detail and finish. How the insert supports process reliability and application range This insert’s design and composition make it suitable for a broad range of applications within the P (steel) and K (cast iron) material groups according to ISO 513. The combination of substrate and coating is chosen to handle the typical heat and abrasion arising from these materials. In practice, this means more consistent dimensional outcomes on series production parts and reduced scrap rates when parameters are set according to workpiece material and machining strategy. Practical handling and integration into tooling systems The square 90° shape and the designation series allow straightforward integration into common milling cutter bodies. The plate size "09" and thickness "T3" correspond with standard clamping systems; operators can therefore replace worn inserts without major adjustments to existing toolholders. For process setup, start with recommended cutting data for the respective material group and fine-tune feeds for chip evacuation and surface finish. The insert’s tolerance class M supports repeatable seating and consistent geometry across changes. Contact Metav Werkzeuge for tailored advice on Walter Tools milling inserts: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: SDMT09T312-F57-WKP35G-WALTER Designation: SDMT09T312-F57 WKP35G Product: Milling insert (indexable) Brand: Walter Tools Facts Clearance angle: 15° Corner radius: 1.2 mm Insert size: 09 Thickness: T3 Tolerance class: M Special features Grade: WKP35G Coating: Tiger-tec Gold Chipbreaker: F57 Shape: Square 90° Applicability: P / K (steel and cast iron) Series: Tiger-tec Gold Execution: T FAQ Which materials are suitable for this insert? The SDMT09T312-F57 WKP35G insert is specified for steel (P) and cast iron (K) applications; the WKP35G grade and Tiger-tec Gold coating are optimised for these material groups. What advantages does the Tiger-tec Gold coating offer? Tiger-tec Gold on the WKP35G grade provides improved wear resistance and thermal stability, leading to longer tool life and steadier cutting conditions during production runs. How does the chipbreaker F57 affect machining? The F57 chipbreaker promotes controlled chip formation for both interrupted and continuous cuts, improving evacuation and surface integrity with the SDMT09T312-F57 WKP35G insert. What does the corner radius and clearance angle mean for performance? A 1.2 mm corner radius increases edge strength and durability, while the 15° clearance angle reduces rubbing and helps maintain stable cutting forces during milling. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no association between our company and the listed brands. The offered article is an original, brand-new product from the manufacturer.
SDMT09T312-F57 WKP35S Wendeplatten - Walter Tools
Taking advantage of the Tiger‑tec Silver coating and the WKP35S grade together with a 15° relief and a 1.2 mm corner radius ensures stable chip formation and long flank life in mixed steel and cast‑iron production. Order the SDMT09T312‑F57 WKP35S directly via Metav Werkzeuge or contact our consultants for application support. SDMT09T312‑F57 WKP35S — Milling insert, Tiger‑tec Silver, for steel & cast iron (square 90°) The SDMT09T312‑F57 WKP35S is a square milling insert designed for productive machining of steel and cast iron, offering a balanced geometry for reliable finishing and semi‑roughing operations. Tiger‑tec Silver coating for high wear resistance Suitable for steel and cast iron applications 15° relief angle for stable cutting 1.2 mm corner radius for robust edge Stable performance through advanced coating and grade The combination of the Tiger‑tec Silver coating and the WKP35S carbide grade provides enhanced resistance to abrasive wear while maintaining a dependable cutting edge under typical steel and cast‑iron temperatures. This coated carbide formulation was developed to manage the heat and chip behaviour associated with ISO‑classified P (steel) and K (cast iron) materials, which means fewer unplanned tool changes and more predictable cycle times. For production planners, this translates into consistent component quality and reduced downtime, as the insert sustains cutting forces over extended runs. Geometry that protects the edge and increases process stability A 15° relief angle combined with the 1.2 mm corner radius and square 90° form creates a robust cutting geometry that tolerates moderate interruptions and variable stock conditions. The larger corner radius increases edge strength, allowing slightly higher feed rates without premature edge chipping, while the 15° relief reduces rubbing on the flank, improving surface finish. The T3 thickness and tolerance M specification ensure mechanical stability in the seat and repeatable positioning in pocket tooling, which supports reliable re‑indexing and predictable tool life. Consistent chip control for cleaner swarf and surface quality The integrated F57 chipbreaker is tuned for controlled chip segmentation in both steels and cast irons, promoting short, manageable chips that evacuate efficiently from the cutting zone. Better chip control reduces the risk of recutting, helps maintain coolant contact where used, and supports an improved workpiece surface. In practice, this leads to fewer interruptions for chip clearing and a lower likelihood of surface defects, so cycle times and first‑pass quality both benefit. Versatility in workshop workflows and selection guidance With compatibility for ISO P and K materials and a general‑purpose execution, this insert suits operations where a single grade must cover a range of steels and cast‑iron components. The WKP35S grade is a coated carbide choice aimed at balancing wear resistance and edge toughness; it is particularly useful where production demands consistent dimensional results and a predictable tool‑change schedule. For process engineers considering cutting data, starting values with moderate speeds and feeds consistent with the workpiece grade and machine rigidity will reveal the insert’s strengths in both life and finish. Contact Metav Werkzeuge for application-specific recommendations and availabilities of Walter Tools Tiger‑tec Silver inserts — our technical advisors provide machining guidance and cutting‑data support to integrate this insert into existing production processes. Technical Data SKU: SDMT09T312-F57-WKP35S-WALTER Article designation: SDMT09T312‑F57 WKP35S Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Relief angle: 15° Corner radius: 1.2 mm Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Grade: WKP35S (coated carbide) Chipbreaker: F57 Material application: Steel (P) and Cast iron (K) Execution: T FAQ What materials is this milling insert best suited for? The SDMT09T312‑F57 WKP35S is tailored for steel (ISO P) and cast iron (ISO K), leveraging the Tiger‑tec Silver technology and WKP35S grade to manage wear and chip formation in these groups. How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius increases edge strength and allows higher feed rates with reduced risk of edge chipping, improving tool life and often yielding a better surface finish on the workpiece. What advantage does the F57 chipbreaker offer? The F57 chipbreaker delivers controlled, short chips in both steels and cast irons, enhancing chip evacuation, reducing recutting, and supporting consistent surface quality during extended runs. Can this insert be used for finishing operations? Yes, the geometry and grade of this indexable insert make it suitable for finishing and light semi‑roughing where dimensional stability and surface quality are required. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand appearance: Walter Tools) is among the world’s leading manufacturers of precision tools for metal machining and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, factory‑new merchandise from the manufacturer.
SDMT09T312-F57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, versatile material compatibility (P / M / S) and robust chip control to increase milling productivity and tool life; order the SDMT09T312-F57 WSP45G insert via Metav Werkzeuge or consult our specialists for application support. SDMT09T312-F57 WSP45G indexable milling insert — Tiger·tec Gold, square 90°, Walter Tools SDMT09T312-F57 WSP45G is a square, PVD-coated indexable insert designed for productive milling of steel, rostfreier Stahl and heat-resistant alloys Tiger·tec Gold coating for stability Versatile for P / M / S material groups Square 90° insert with 15° relief Increased productivity through a modern coating and grade The WSP45G grade, part of the Tiger·tec Gold series, is a PVD-coated cemented carbide formulated for high process reliability and extended tool life. The coated substrate supports stable cutting under the heat and strain typical of steels and high-temperature alloys, which leads to fewer interruptions and longer intervals between index changes. As a result, batch throughput is improved and the overall machining cycle becomes more predictable. Reliable chip control and consistent surface quality Designed with a chipbreaker F57, a 1.2 mm corner radius and a 15° relief angle, the insert balances strength and controlled chip formation. The combination of geometry and the coated carbide surface reduces the risk of built-up edge and makes evacuation of chips more efficient, which helps to secure a consistent surface finish and minimise rework. For students of metrology or production supervisors, this means better reproducibility of parts and reduced need for finishing passes. Robust design for varied milling tasks and easy integration The square 90° format and T3 thickness provide a stable seating and high radial rigidity, suitable for general milling tasks where tool life and repeatability matter. Tolerance class M and the insert size 09 make it compatible with many standard cutter bodies; the SDMT09T312-F57 WSP45G insert is therefore a practical choice for jobbing shops and OEM production requiring a single versatile grade across multiple materials (steel, rostfreier Stahl and nickel/titanium-based superalloys). The result is simplified tool management and fewer grade changes at the toolroom. Contact Metav Werkzeuge to discuss how Walter Tools Tiger·tec Gold inserts can be specified for current projects and to obtain matching cutter holders or technical guidance Technical data Article number: SDMT09T312-F57-WSP45G-WALTER Designation: SDMT09T312-F57 WSP45G Manufacturer: Walter Tools Series: Tiger·tec Gold Key figures Relief angle: 15° Corner radius: 1.2 mm Insert form: Square 90° Chipbreaker: F57 Size: 09 Thickness: T3 Tolerance class: M Features / Applications Grade: WSP45G (PVD-coated cemented carbide) Material compatibility: P / M / S (Steel / rostfreier Stahl / heat-resistant superalloys & titanium) Execution: T Typical use: milling applications requiring stable chip control and long tool life Suitable for general and demanding milling operations FAQ What materials can this insert machine effectively? The SDMT09T312-F57 WSP45G insert is formulated for P (steel), M (rostfreier Stahl) and S (heat-resistant superalloys and titanium) groups, offering versatile performance across these materials. How does the Tiger·tec Gold technology benefit milling operations? Tiger·tec Gold coating on the WSP45G grade increases wear resistance and thermal stability, which helps the insert maintain a stable cutting edge and extends service life in continuous milling. What does the chipbreaker F57 do for performance? The chipbreaker F57 improves chip control and evacuation, reducing the chance of built-up edge and supporting a consistent surface finish during interrupted or continuous cuts. Are these inserts compatible with standard cutter bodies? Yes, the insert’s form SDMT09T312-F57 and size 09 with tolerance class M are designed to fit common cutter bodies that accept this ISO-style insert designation. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarks and trade names mentioned are the property of their respective owners. Brand names are referenced for explanatory purposes only and do not indicate any affiliation or endorsement by our company. The offered article is original, factory-new goods supplied by the manufacturer.
SDMT09T316-F57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WKP35G grade for consistent wear resistance and reliable chip formation during demanding milling operations; order this insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. SDMT09T316-F57 WKP35G milling indexable insert — square 90°, 1.6 mm corner radius (Walter Tools) The SDMT09T316-F57 WKP35G is a square 90° milling insert with a 1.6 mm corner radius and a 15° relief angle, designed for productive machining of steel and cast iron. Tiger‑tec Gold coating for long life WKP35G grade for steel & cast iron 15° clearance for robust engagement Square 90° with 1.6 mm corner radius Consistent performance from advanced coating technology The application of Tiger‑tec Gold delivers a durable, multi‑layer coating that reduces abrasive wear and extends tool life under the thermal and mechanical loads typical of steel machining. This technology is particularly effective where high process reliability is required: the coating's thermal stability and wear resistance translate into fewer tool changes and steadier component quality. The combination of the coating with the WKP35G grade provides balanced toughness and hardness, so that the insert resists chipping while maintaining cutting-edge integrity. Geometry that improves chip control and surface quality A square 90° insert form and the specified 1.6 mm corner radius create a robust cutting edge, distributing cutting forces to reduce edge fracture risk in interrupted or variable cuts. The built‑in F57 chipbreaker and the insert relief of 15° encourage controlled chip formation and evacuation, which lowers the chance of recutting and improves surface finish. For operators moving from general‑purpose inserts, this geometry means fewer rejects and more predictable feed and speed settings on the machine. Clear material suitability and practical benefits This insert is specified for material groups P and K (steel and cast iron) according to ISO classifications, meaning it is optimised for the heat generation and chip behaviour associated with these materials. In practical terms, the coated cemented carbide formulation and the WKP35G specification allow stable machining of both unalloyed and alloyed steels as well as abrasive cast iron grades. The technical design reduces downtime through longer tool life and delivers repeatable component tolerances for batch production. Simple integration and economic productivity The ISO designation and the standard square form make the insert straightforward to integrate into existing milling toolholders and machining cycles, enabling quick setup and predictable cycle times. The SDMT09T316‑F57 WKP35G balances durability and edge stability to achieve a favourable cost‑per‑part ratio in medium to high production environments. For production planners, the result is a measurable improvement in process stability and tooling efficiency without complex parameter changes. Contact Metav Werkzeuge for tailored Walter Tools recommendations and ordering options to benefit from Tiger‑tec Gold performance on your steel and cast iron applications Technical data SKU: SDMT09T316-F57-WKP35G-WALTER Name: Fräswendeschneidplatte SDMT09T316-F57 WKP35G Walter Tools Brand: Walter Tools Series: Tiger‑tec Gold Key figures Relief angle: 15° Corner radius: 1.6 mm Insert size: 09 Thickness: T3 Tolerance class: M Design features ISO designation: SDMT09T316-F57 WKP35G Grade: WKP35G Chipbreaker: F57 Shape: Square 90° Execution: T Material suitability: P / K (Steel and Cast iron) FAQ What materials is this insert intended for? The insert is designed for steel (P) and cast iron (K) applications; the WKP35G grade and Tiger‑tec Gold coating together are optimised for these material groups. How does the corner radius affect performance? A 1.6 mm corner radius increases edge strength and distributes cutting forces, which reduces the risk of chipping in interrupted cuts and improves surface finish consistency. Is the chip control suitable for heavy milling? Yes, the combination of the F57 chipbreaker and the insert geometry supports controlled chip formation during robust engagement, making it suitable for demanding milling operations. Will this insert fit standard milling holders? The insert follows the ISO designation SDMT09T316‑F57 WKP35G and the square 90° form, so it is compatible with toolholders designed for that ISO insert type. What key advantage does the Tiger‑tec Gold series provide? Tiger‑tec Gold contributes high wear resistance and thermal stability, which improves tool life and process reliability in repetitive production environments. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are used solely for explanatory purposes; there is no affiliation between our company and the mentioned brands. The offered item is original and brand‑new.
SDMT09T316-F57 WKP35S Wendeplatten - Walter Tools
Take advantage of a high-performance, coated-carbide solution that combines consistent metal removal and extended tool life; the combination of Tiger·tec Silver technology and the WKP35S grade delivers reliable machining of steel and cast iron. Order this insert directly via Metav Werkzeuge or consult the technical team for application advice. SDMT09T316-F57 WKP35S milling insert — 15° relief angle, 1.6 mm corner radius — Walter Tools The SDMT09T316-F57 WKP35S is a coated carbide milling insert designed for productive machining of steel and cast iron, optimised within the Tiger·tec Silver series for stable chip formation and durable cutting performance. Tiger·tec Silver coated carbide grade WKP35S Optimised for steel and cast iron machining 15° relief angle for stable cutting 1.6 mm corner radius, square 90° geometry Consistent performance through a proven coating and grade The Tiger·tec Silver technology combined with the WKP35S grade is engineered to deliver consistent metal removal when machining common ferrous materials. Coated carbide provides wear resistance under the thermal and mechanical stresses typical of steel and cast iron operations, so cycle times remain predictable and tool changes are reduced. For shops seeking to improve throughput, this equates to fewer interruptions and a more stable machining process. Geometry that ensures repeatable, high-quality edges A 15° relief angle and a square 90° geometry produce a robust cutting edge that resists chipping during interrupted cuts. The 1.6 mm corner radius balances edge strength with achievable surface finish, permitting reliable entry and exit behaviour in peripheral milling. For engineers unfamiliar with insert geometry, the relief angle reduces rubbing behind the cutting edge, while the corner radius contributes to edge life and surface integrity. Productivity gains from optimised chip control and material match The integrated F57 chipbreaker and coated-carbine substrate are selected for efficient chip control when machining both steel (P) and cast iron (K). Effective chipbreaking prevents re-cutting, reduces heat concentration at the edge and helps maintain a uniform surface quality. In practical terms, shops can expect improved process stability and longer intervals between indexings, translating into measurable production gains. Application guidance and compatibility for workshop use This insert is supplied in the SDMT09T316-F57 geometry and a T3 plate thickness, making it compatible with toolholders designed for 09-size square inserts. The WKP35S coating/grade is particularly suited to general steel and cast-iron work under varying cutting conditions; it is not specified for stainless steel or high-temperature alloys in the provided data. For selection of optimal cutting parameters, refer to machine capability and workpiece specifications to fully exploit the grade’s balance of wear resistance and toughness. For high-productivity milling with the Walter Tools Tiger·tec Silver grade, contact Metav Werkzeuge for technical consultation and stock availability: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data SKU: SDMT09T316-F57-WKP35S-WALTER Name: SDMT09T316-F57 WKP35S Type: Milling insert Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Relief angle: 15° Corner radius: 1.6 mm Plate shape: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Grade/coating: WKP35S (coated carbide, Tiger·tec Silver) Suitable for: Steel (P) and Cast iron (K) Chipbreaker: F57 Geometry designation: SDMT09T316-F57 FAQ What materials is this insert suitable for? The SDMT09T316-F57 WKP35S insert is specified for steel (P) and cast iron (K), reflecting the design priorities of the WKP35S grade within the Tiger·tec Silver family. How does the 15° relief angle affect machining performance? A 15° relief angle reduces flank contact and helps maintain a stable cutting edge, which improves process reliability when the SDMT09T316-F57 WKP35S insert machines both steels and cast irons. What benefits does the WKP35S grade provide? WKP35S, as a coated carbide grade of the Tiger·tec Silver series, offers improved wear resistance and stable chip formation, supporting longer tool life and consistent part quality with this milling insert. Which chipbreaker is integrated and why does it matter? The insert features the F57 chipbreaker, which is optimised for controlled chip formation in ferrous materials, reducing the risk of re-cutting and contributing to process stability during milling. Is this insert compatible with 09-size square toolholders? Yes, the SDMT09T316-F57 geometry and 09 plate size indicate compatibility with toolholders designed for 09 square inserts and a T3 thickness. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is original, factory-new goods of the manufacturer Walter Tools.
SDMT09T316-F57 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of high process security, broad material versatility and low downtime for efficient milling operations; order the insert directly via Metav Werkzeuge or contact the consultants for application-specific guidance. SDMT09T316-F57 WSP45G Fräswendeschneidplatte (Tiger·tec Gold) – Walter Tools — PVD-coated carbide, 15° clearance, 1.6 mm corner radius SDMT09T316-F57 WSP45G is a square milling insert designed for general and heavy-duty milling of steels, stainless steels and heat-resistant alloys, offering stable cutting edges and consistent chip control. Tiger·tec Gold PVD coating for improved wear resistance Suitable for steel, stainless and superalloys Square 90° form with 1.6 mm corner radius Consistent performance for productive milling The Tiger·tec Gold grade WSP45G is a PVD-coated carbide cutting material formulated for a balance of toughness and wear resistance. This combination promotes stable chip formation and reduces the risk of built-up edge when machining common construction steels and more demanding materials. The PVD layer enhances flank and crater wear resistance, which translates into longer effective tool life and fewer insert changes, improving spindle utilisation and lowering indirect production costs. Versatility across materials and applications Designed for the ISO groups P, M and S, the insert supports machining of steel, stainless steels and heat-resistant superalloys/titanium, making it suitable for mixed-batch production or set-ups requiring flexible tooling. The chipbreaker F57 encourages predictable chips in a wide range of cutting conditions, assisting in secure evacuation and reducing the chance of re-cutting. For shops that handle both ferrous and high-temperature alloys, this grade offers a pragmatic compromise between toughness and hardness. Engineering features that reduce downtime The geometry—square 90° form with a 1.6 mm corner radius and 15° clearance angle—is optimised for rigidity and strength at the cutting edge. A larger corner radius increases edge robustness for interrupted cuts and shoulders, while the relief angle supports smooth entry and exit, limiting edge chipping. The insert’s tolerance class M and T3 thickness give consistent seating and repeatable results in toolholders, which reduces set-up time and contributes to stable surface finishes. Practical handling and process integration This insert is part of the Tiger·tec Gold series and is supplied in the ISO designation SDMT09T316-F57 WSP45G. The format and standard designation simplify tool planning and procurement in production environments. For milling strategies, pairing this insert with a suitable cutter body and optimising feeds to the material will deliver the best compromise between tool life and cycle time. Where higher temperatures or abrasive conditions occur, the PVD coating supports thermal and oxidative resistance to maintain cutting-edge integrity. Contact Metav Werkzeuge for availability and tailored cutting recommendations based on the Tiger·tec Gold WSP45G grade and machining requirements Technical data Article number: SDMT09T316-F57-WSP45G-WALTER Product type: Fräswendeschneidplatte Series: Tiger·tec Gold Grade: WSP45G Manufacturer: Walter Tools ISO designation: SDMT09T316-F57 WSP45G Facts Corner radius: 1.6 mm Clearance angle: 15° Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Gold (PVD) Chipbreaker: F57 Material suitability: P / M / S (steel, stainless steels, superalloys/titanium) Edge design: Robust for interrupted cuts and shoulders FAQ What materials is this insert suitable for? The SDMT09T316-F57 WSP45G insert is specified for ISO groups P, M and S, meaning it is suitable for machining steel, stainless steels and heat-resistant superalloys/titanium. What are the key geometry values of the insert? The insert features a 1.6 mm corner radius, a 15° clearance angle, a square 90° form and a T3 thickness for stable seating and robust cutting edges. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold PVD coating increases wear resistance on both flank and crater faces, helping to maintain a stable cutting edge and extend tool life under diverse cutting conditions. Which chipbreaker does this insert use and why is it important? This insert uses the F57 chipbreaker, which promotes predictable chip forms across a broad range of metals and cutting conditions, aiding chip evacuation and reducing re-cutting. Is this insert suitable for interrupted cuts and shoulder milling? Yes; the combination of the square 90° form and a 1.6 mm corner radius enhances edge strength, making the insert resilient under interrupted cutting and shoulder machining. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names are used for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, brand-new merchandise from the manufacturer.
SDMT09T320-F57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WKP35G grade and a square 90° geometry to ensure stable chip control and long tool life in steel and cast iron machining; order the insert directly via Metav Werkzeuge or consult our technical team for process integration. SDMT09T320-F57 WKP35G milling insert (for Steel & Cast iron) — Walter Tools The SDMT09T320-F57 WKP35G is a square 90° milling insert engineered for productive roughing and finishing operations in steel and cast iron, offering optimised chip control and high wear resistance. *Tiger·tec Gold coated carbide for high wear resistance *Optimised for steel (P) and cast iron (K) machining *Square 90° form with 2 mm corner radius *Rake angle 15° and F57 chipbreaker geometry Increased process reliability through advanced coating and grade The combination of the Tiger·tec Gold coating and the WKP35G coated carbide grade provides a measurable improvement in wear resistance and edge stability during continuous production. By using a cutting grade designed specifically for metallic abrasion and intermittent chip breakage, the insert supports consistent cycle times and reduces unplanned tool changes. The engineered coating lowers friction and thermal impact at the cutting edge, which in turn prolongs service intervals and contributes to predictable tool-life planning for series production. Designed geometry for efficient chip formation and secure seating A square 90° insert form with a 2 mm corner radius and a 15° relief produces robust cutting edges suited to both heavy roughing and stable semi-finish passes. The incorporated F57 chipbreaker promotes controlled fragmentation of swarf when machining both steel and cast iron, reducing the risk of built-up edge and improving surface quality. The insert geometry also simplifies fixture planning as the 90° shape enables versatile orientation in standard milling cutter bodies. Practical benefits for shop-floor productivity and part quality Adopting this insert in machining strategies leads to tangible productivity gains: fewer interruptions for edge changes, improved repeatability between batches and a better balance between material removal rate and surface finish. The coated carbide composition and chip control design mean that the cutting edge tolerates the typical heat and abrasive wear encountered with unalloyed and alloyed steel as well as the short, breaking chips of cast iron. For workshops aiming to standardise tooling across mixed-material programmes, the insert offers a reliable compromise between performance and versatility. For reliable supply and technical advice on integrating the Walter Tools SDMT09T320-F57 WKP35G milling insert into existing processes, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav Werkzeuge can advise on tooling bodies and order fulfilment Technical data SKU: SDMT09T320-F57-WKP35G-WALTER Article: SDMT09T320-F57 WKP35G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WKP35G Type: milling insert Facts Relief angle: 15° Corner radius: 2 mm Form: square 90° Size: 09 Thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Gold Chipbreaker: F57 Material suitability: steel (P), cast iron (K) Coated carbide grade for enhanced wear resistance Optimised for stable chip control and productive machining FAQ What materials is this insert suitable for? The SDMT09T320-F57 WKP35G from Walter Tools is specified for machining steel (P) and cast iron (K) according to ISO group classifications; the grade and chipformer are matched to these material characteristics. What does the Tiger·tec Gold coating provide? Tiger·tec Gold on the SDMT09T320-F57 WKP35G enhances thermal and abrasive resistance, improving edge life and process stability during continuous and interrupted cuts in steel and cast iron. How does the F57 chipbreaker affect machining? The F57 geometry on the SDMT09T320-F57 WKP35G promotes defined chip fragmentation, which supports safer swarf evacuation and better surface integrity when cutting both unalloyed and alloyed materials. Is the square 90° form suitable for heavy milling operations? Yes, the square 90° insert with a 2 mm corner radius provides robust cutting corners for demanding roughing passes while remaining versatile for semi-finishing work when mounted in appropriate cutter bodies. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; info@walter-tools.com Protected trademarks and product names mentioned are the property of their respective owners. Markennamen and geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMT09T320-F57 WPP35G Wendeplatten - Walter Tools
Combine high process security and wide material coverage with the productive Tiger‑tec Gold grade; the SDMT09T320‑F57 WPP35G insert delivers stable chip formation and extended tool life for steel machining. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. SDMT09T320‑F57 WPP35G indexable milling insert — Tiger‑tec Gold grade, for steel machining (Walter Tools) The SDMT09T320‑F57 WPP35G is a square indexable milling insert designed for productive machining of steel, combining a Tiger‑tec Gold coated carbide grade with a robust 2 mm corner radius and a dedicated F57 chipformer for controlled chip flow. Tiger‑tec Gold coating for long tool life Optimised chipformer F57 Square 90° geometry, 2 mm corner radius Designed for steel machining (ISO P) Consistent cutting performance for steel components The Tiger‑tec Gold WPP35G grade is a coated carbide solution optimised for machining steel (ISO group P). The coating strategy combines thermal resistance with a durable substrate to reduce flank wear under typical steel cutting temperatures. The F57 chipformer promotes predictable chip breakage and evacuation, which lowers cycle-time variability and reduces the risk of built-up edge. For production environments that prioritise repeatability, these material and chip-control characteristics translate directly into fewer interruptions and more consistent part quality. Robust geometry that protects tool life and surface finish A square 90° plate shape with a 2 mm corner radius and 15° clearance angle delivers a balance of edge strength and finishing capability; the larger corner radius increases edge resilience during interrupted cuts and heavy reductions, while the geometry still supports good surface integrity on workpieces. The plate thickness T3 and nominal size 09 contribute to stable clamping in suitable cutters, reducing vibration susceptibility. The tolerance class M indicates consistent dimensional accuracy for reliable seating and indexability in multi-edge toolholders. Application focus and selection guidance for process optimisation This insert is specified for machining unalloyed and alloyed steel grades, mapped under the ISO P designation where wear resistance and versatile performance are required. The WPP35G sort is characterised by wear grades that balance resistance and toughness, making it suitable across a range of common steel turning and milling tasks. When integrating the insert into a toolset, pairing with the right cutter body and cutting data adapted to the F57 chipformer yields the best economic return: reduced tool changes and stable component output without sacrificing cycle times. Contact Metav Werkzeuge for tailored recommendations on cutter bodies and cutting data for the Walter Tools SDMT09T320‑F57 WPP35G insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for direct technical advice Technical Data SKU: SDMT09T320-F57-WPP35G-WALTER Article: SDMT09T320-F57 WPP35G Product type: Indexable milling insert Brand: Walter Tools Grade: WPP35G Series: Tiger‑tec Gold Facts Clearance angle: 15° Corner radius: 2 mm Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: M Chipformer: F57 Special features Coating: Tiger‑tec Gold (coated carbide) Material application: Steel (ISO P) Series description: WPP35G coated carbide grade Designation: SDMT09T320-F57 FAQ Is this insert suitable for stainless steel? The specification for the SDMT09T320‑F57 WPP35G targets steel (ISO P); there is no listed qualification for stainless steels in the provided data. What is the purpose of the F57 chipformer? The F57 chipformer is designed to control chip shape and breakage during milling, improving evacuation and promoting stable cutting conditions for the WPP35G grade. How does the 2 mm corner radius affect performance? A 2 mm corner radius increases edge strength and improves resistance to chipping during interrupted cuts, supporting longer tool life and consistent surface finish in heavy or variable milling operations. Can the SDMT09T320‑F57 be used in high‑precision finishing? The square geometry with a moderate corner radius and the Tiger‑tec Gold coating allow a compromise between robustness and finish; for demanding finishing passes, adjustment of feed and depth of cut is recommended to meet required tolerances. What cutting applications is this insert optimised for? The insert is optimised for productive machining of general unalloyed and alloyed steel grades where stable chip formation and tool life are priorities, as indicated by the WPP35G grade and Tiger‑tec Gold series. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMT09T320-F57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSM35G grade for secure chip control and extended tool life when machining stainless steels and heat-resistant alloys; order the SDMT09T320-F57 WSM35G milling insert via Metav Werkzeuge or request application advice from their consultants. SDMT09T320-F57 WSM35G milling indexable insert by Walter Tools — Tiger·tec Gold, for stainless steels and superalloys SDMT09T320-F57 WSM35G is a square 90° milling insert designed for demanding materials, offering robust edge security and optimised chip control for high-performance milling. Tiger·tec Gold coating for thermal stability Optimised F57 chipformer for consistent chips 15° clearance angle for reduced friction 2.0 mm corner radius, square 90° geometry Increase productivity when machining stainless and heat‑resistant alloys The combination of the WSM35G grade and Tiger·tec Gold coating delivers a reliable mix of wear resistance and thermal management, particularly for stainless steels and superalloys. The coating reduces adhesion and heat build-up on the cutting edge, which in turn supports stable cutting-edge performance and predictable tool life. For production environments where consistent component quality and cycle times matter, this behaviour translates directly into fewer tool changes and improved overall productivity. Robust geometry for reliable milling and repeatable accuracy A square 90° shape with a 2.0 mm corner radius and 15° clearance provides mechanical strength and reduced rubbing on the workpiece. The F57 chipformer helps to break and evacuate chips, lowering the risk of built-up edge and improving surface finish on the workpiece. These geometric attributes make the insert well suited to interrupted cuts and heavy engagement, where durability and steady performance are essential for maintaining process reliability. Clear technical advantages explained for practical use The F57 chipformer is engineered to generate short, controllable chips in materials that tend to form long, stringy swarf; this improves tool life and simplifies chip handling. The WSM35G grade is a coated carbide developed for materials that quickly generate heat or challenge the cutting edge, supporting machining of the ISO groups S and M (heat‑resistant alloys/titanium and stainless steels). For shops seeking a straightforward upgrade in robustness and surface quality, this insert provides a measurable improvement without complex process changes. For machining advice, availability and to specify the SDMT09T320-F57 WSM35G for a particular application, contact Metav Werkzeuge: eMail info@metav-werkzeuge.com or phone +49 2822 7131930 — Metav Werkzeuge can advise on cutting data and supply options Technical Data Article number / SKU: SDMT09T320-F57-WSM35G-WALTER Product name: SDMT09T320-F57 WSM35G Series: Tiger·tec Gold Facts Clearance angle: 15° Corner radius: 2.0 mm Insert size: 09 Thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Grade: WSM35G Chipformer: F57 Geometry: Square 90° Version: T Suitable for: Stainless steels (M) and heat‑resistant superalloys/titanium (S) Application focus: Milling of difficult‑to‑machine materials FAQ What materials is this insert designed for? The SDMT09T320-F57 WSM35G insert is formulated for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering thermal stability and edge security for these demanding materials. How does the F57 chipformer affect machining? The F57 chipformer on the SDMT09T320-F57 WSM35G helps produce short, controllable chips, reducing the likelihood of built‑up edge and improving surface finish during milling operations. Is this insert suitable for interrupted cuts? Yes, the square 90° geometry with a 2.0 mm corner radius provides mechanical strength suitable for interrupted cuts and heavier engagements, supporting repeatable performance. What does the Tiger·tec Gold coating provide? Tiger·tec Gold coating on this Walter Tools insert enhances heat resistance and reduces adhesion at the cutting edge, which supports longer tool life and more consistent machining results in stainless steels and superalloys. Which feature most affects tool life in challenging materials? The combination of the WSM35G grade and the Tiger·tec Gold coating is the key factor for extended tool life when machining heat‑generating materials, by improving wear resistance and cutting‑edge stability. Manufacturer: Walter Tools; Headquarters: Tübingen, Germany; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMT09T320-F57 WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide performance, precise chip control, and a geometry optimised for stainless steels and superalloys to maintain stable production cycles. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. SDMT09T320-F57 WSM45X – Fräswendeschneidplatte by Walter Tools (coated carbide for stainless steels & superalloys) SDMT09T320-F57 WSM45X is a square milling insert designed for demanding machining of stainless steels and heat-resistant alloys, offering a robust combination of cutting-edge substrate and chip control geometry Coated carbide grade WSM45X Optimised F57 chipbreaker geometry 15° clearance angle for secure cutting Consistent machining performance for tough materials The WSM45X grade is a coated carbide formulation developed for high thermal and mechanical load, which directly supports safe chip formation when machining stainless steels and heat-resistant superalloys. This insert combines a wear-resistant coating with a substrate engineered to withstand the adhesion and built-up edge tendencies of these materials. For production, that means fewer interruptions for tool changes and a lower risk of unexpected workpiece rejects. The design allows for reliable cutting forces and contributes to a predictable tool life under appropriately set cutting parameters. Geometry that stabilises the cut and improves surface outcome A square 90° form with a 2 mm corner radius and a 15° relief angle gives a clear balance between edge strength and achievable surface finish. The F57 chipbreaker actively controls chip flow, reducing the likelihood of long, stringy swarf and improving evacuation in deep slotting or shoulder milling. For operators less familiar with insert terminology: the corner radius helps absorb shock and protect the cutting edge, while the relief angle prevents unwanted rubbing; together they reduce chatter and help achieve a consistent surface quality on each component. Productivity gains through fewer tool interventions The insert’s construction and geometry are aimed at keeping machines cutting longer. With the WSM45X composition and the F57 chip control, regrinding or early replacement is less frequent compared with general-purpose grades when applied to the specified material groups. This translates into a measurable improvement in process economy: reduced setup time, fewer tool changes and more predictable production output. In short, the insert supports continuous, efficient operation for batch and series production where material properties would otherwise limit cutting speeds. For precise selection, batch planning or to discuss how the SDMT09T320-F57 WSM45X from Walter Tools can be integrated into existing machining processes, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored application advice and reordering options. Technical data SKU: SDMT09T320-F57-WSM45X-WALTER Designation: SDMT09T320-F57 WSM45X Product type: Fräswendeschneidplatte Series: Walter Schneidstoffsorte - Serie offen Numbers / Core technical data Relief angle: 15° Corner radius: 2 mm Size designation: 09 Thickness: T3 Special features / Versions Coated carbide (beschichtetes Hartmetall) Suitable for stainless steels (M) and superalloys/titanium (S) Chipbreaker: F57 Square plate, 90° form Grade designation: WSM45X Tolerance class: M Execution/form: T FAQ What materials is this insert suitable for? The SDMT09T320-F57 WSM45X insert is optimised for stainless steels (material group M) and heat-resistant superalloys and titanium (group S), offering stable cutting edges under high thermal loads. How does the F57 chipbreaker benefit production? The F57 chipbreaker on this insert helps control chip form and evacuation, reducing long swarf and improving process reliability when milling difficult-to-machine alloys. What are the key geometry parameters to consider for setup? Focus on the 15° relief angle and 2 mm corner radius for stability and surface finish; adjust cutting parameters to account for the insert’s strength and the workpiece material. The Walter AG (marketed as Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision metalworking tools and is part of the Sandvik Group. Protected trademarks and product names belong to their respective owners. Brand names and trademarks are used for explanation only; there is no affiliation between our company and the trademark owners. The offered article is an original, factory-new product from the manufacturer.
SDMT09T320-F57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a 15° clearance angle and the proven F57 chipbreaker for reliable, long‑run milling in demanding materials; order the insert via Metav Werkzeuge or contact the technical consultants for application advice. SDMT09T320-F57 WSP45G milling indexable insert — Tiger·tec Gold, 15° clearance — Walter Tools The SDMT09T320-F57 WSP45G is a square milling indexable insert engineered for versatile face and shoulder milling in Stahl, rostfreier Stahl and heat‑resistant alloys, combining robust edge stability with consistent chip control. Tiger·tec Gold PVD coating for long tool life Designed for Stahl, rostfreier Stahl and superalloys Square 90° shape with 2 mm corner radius 15° clearance and F57 chipbreaker for stable chips High performance where consistency matters The coated carbide grade from the Tiger·tec Gold family delivers a balance of toughness and wear resistance that is particularly effective in intermittent and continuous milling. The PVD-coated substrate combines hardness for abrasion resistance with sufficient edge stability to resist chipping under moderate interruptions. This results in a real productivity gain where consistent component quality is required and tool change intervals must be predictable. The insert’s geometry supports stable cutting conditions, reducing the risk of built‑up edge and preserving surface finish. Optimised chip control for repeatable results The integrated F57 chipbreaker is designed to form and evacuate chips reliably across the intended material groups P, M and S. Effective chip control prevents re-cutting and protects the cutting edge, which in turn maintains dimensional accuracy during long batches. For shops that machine a mix of Stahl and rostfreier Stahl, the combination of the chipbreaker and the grade’s balanced toughness helps to keep surface integrity and tool life consistent, even when feeds and depths vary slightly between operations. Geometry tuned for versatile milling operations A square 90° form offers full‑profile engagement for shoulder and face milling, while the 2 mm corner radius increases edge strength and contributes to improved tool life when producing fillets or step transitions. The 15° clearance angle reduces rubbing at the flank, lowering heat build‑up and supporting stable cutting forces. For technicians less familiar with cutting geometry, the clearance angle is the relief between the flank face and the workpiece; in practice, this geometry helps to avoid frictional damage and extends productive run times. Practical application advice and machining benefits When used under appropriate cutting parameters for the target material group, the grade provides secure chip formation and repeatable performance. For machining operations in rostfreier Stahl, moderate feeds with controlled cutting speeds reduce thermal loading; in Stahl, higher speeds are possible while maintaining the same insert to shorten cycle times. The insert’s replaceable‑edge concept reduces downtime: when an edge wears, indexing restores original geometry without the need for regrinding, supporting lean production and predictable tool change scheduling. For reliable, high‑productivity milling choose the Walter Tools SDMT09T320‑F57 WSP45G — contact Metav Werkzeuge for a tailored machining recommendation or technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: SDMT09T320-F57-WSP45G-WALTER Product: milling indexable insert Designation: SDMT09T320-F57 Grade: WSP45G Series: Tiger·tec Gold Manufacturer: Walter Tools Shape: square 90° Corner radius: 2 mm Clearance angle: 15° Thickness: T3 Chipbreaker: F57 Size: 09 Tolerance class: M Data Corner radius: 2 mm Clearance angle: 15° Thickness: T3 Size code: 09 Tolerance: M Special features Coating: Tiger·tec Gold (PVD) Material groups: P / M / S Suitable for: Stahl, rostfreier Stahl, superalloys and titanium Application focus: face and shoulder milling Series characteristics: balanced toughness and wear resistance FAQ What materials is the SDMT09T320-F57 WSP45G suitable for? The SDMT09T320-F57 WSP45G is specified for the ISO groups P, M and S, meaning it is suitable for machining Stahl, rostfreier Stahl and heat‑resistant superalloys or titanium. How does the Tiger·tec Gold coating benefit milling operations? The Tiger·tec Gold PVD coating increases wear resistance and supports stable edge life, which reduces downtime and delivers more consistent component quality over extended runs with the SDMT09T320-F57 WSP45G. When should the 2 mm corner radius be preferred? The 2 mm corner radius strengthens the cutting edge for applications involving fillets, shoulder passes or intermittent cutting, improving durability compared with smaller radii. Can the insert handle interrupted cuts? Yes—its combination of a tough base grade and the F57 chipbreaker provides improved edge stability for moderate interruptions, offering safer performance in interrupted milling scenarios. Is this insert indexed or disposable? This is an indexable insert: worn edges are indexed to a fresh cutting edge, restoring geometry and reducing total toolholding costs for serial production. Walter Tools: Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and designations mentioned are the property of their respective owners and are used here for explanation only. There is no affiliation between Metav Werkzeuge and the named brands. The offered article is original, factory‑new merchandise from the manufacturer.
SDMT09T3AEN-D57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, the WKP35S grade and a robust D57 chipbreaker to secure consistent chip control and extended tool life; order the insert directly via Metav Werkzeuge or contact their consultants for application-specific advice. SDMT09T3AEN-D57 WKP35S – Milling indexable insert (Tiger‑tec Silver) for steel and cast iron | Walter Tools The SDMT09T3AEN-D57 WKP35S is a square 90° milling insert with 15° clearance, designed for productive roughing and medium finishing of steel and cast iron components *Tiger‑tec Silver coated grade WKP35S *Optimised for steel and cast iron *Square 90° insert, 15° clearance *T3 thickness with D57 chipbreaker Proven productivity for steel and cast iron machining The coated carbide grade WKP35S from the Tiger‑tec Silver family delivers a balanced combination of wear resistance and toughness tailored to the heat and chip formation typical of steel and cast iron. The insert’s D57 chipbreaker is engineered to produce short, controllable chips in abrasive cast materials and continuous to segmented chips in steels, reducing tool downtime and improving process stability. As a result, users benefit from predictable tool life and lower overall machining costs compared with unoptimised grades. Geometry that stabilises cutting and surface quality A square 90° plate geometry with a 15° clearance angle provides a reliable cutting edge for shoulder and peripheral milling where axial and radial loads vary. The T3 plate thickness and tolerance class M ensure secure clamping and repeatable positioning in the tool holder, which contributes to consistent dimensional accuracy and surface finish. The specified geometry also simplifies tool management on the shop floor: fewer insert changes and fewer tool variations are required to cover common milling tasks. Process advantages and ease of use in production environments The insert is a ready-to-fit solution for high-volume and jobbing environments that demand both productivity and robustness. The coated carbide construction of this grade supports elevated cutting parameters while maintaining a stable cutting edge, which helps to reduce cycle times. With its focus on efficient chip formation, the insert lowers the risk of built‑up edge and improves evacuation, decreasing the likelihood of rework. Compatibility with standard square milling cutters also makes integration into existing tool setups straightforward, helping to streamline tool logistics. Practical guidance for selection and application Choose the SDMT09T3AEN-D57 WKP35S where reliable performance in P (steel) and K (cast iron) material groups is required. For best results, pair the insert with a cutter body designed for square 90° plates and select cutting parameters that exploit the grade’s wear resistance—moderate to high speeds for steel and reduced depth of cut for abrasive cast irons. The insert’s chipbreaker is particularly effective during interrupted cuts or variable material sections, where chip control and edge stability are critical. For tailored application advice or to request a quotation for the SDMT09T3AEN-D57 WKP35S milling insert, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SDMT09T3AEN-D57-WKP35S-WALTER Product: Milling indexable insert Manufacturer: Walter Tools Grade: WKP35S Series: Tiger‑tec Silver Facts Clearance angle: 15° Plate form: Square 90° Size: 09 Plate thickness: T3 Chipbreaker: D57 Tolerance class: M Special features Coating / grade: Tiger‑tec Silver, WKP35S (coated carbide) Material suitability: Steel (P) and Cast iron (K) Execution: T Plate shape: Quadrate 90° FAQ What materials is this insert designed for? The SDMT09T3AEN-D57 WKP35S is specified for ISO groups P (steel) and K (cast iron); the grade and D57 chipbreaker support the typical chip formation and wear characteristics of these materials. How does the Tiger‑tec Silver coating benefit machining? The Tiger‑tec Silver coating on the WKP35S grade reduces abrasive wear and improves edge stability at higher cutting speeds, which helps to extend tool life and maintain consistent surface quality. What does the D57 chipbreaker achieve in practice? The D57 chipbreaker promotes controlled chip segmentation and easier evacuation, reducing the risk of chip entanglement and aiding process reliability during both continuous and interrupted cuts. Which cutter geometries are compatible with this insert? The square 90° configuration and T3 thickness are compatible with standard square milling cutter bodies that accept 09‑sized inserts, enabling secure clamping and repeatable positioning. What are the key geometric specifications for setup? Key specifications: 15° clearance angle, Square 90° plate form, size 09, thickness T3, and tolerance class M; SKU: SDMT09T3AEN-D57-WKP35S-WALTER Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between Metav Werkzeuge and the mentioned brands. The offered item is original, brand‑new merchandise supplied by the manufacturer.
SDMT09T3AEN-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSM35G grade for reliable chip control and extended tool life in demanding materials; the square 90° form with a 15° relief angle ensures stable cutting edges and predictable performance. Order the SDMT09T3AEN-D57 WSM35G directly via Metav Werkzeuge or ask our consultants if needed. SDMT09T3AEN-D57 WSM35G — Fräswendeschneidplatte (Tiger·tec Gold, 15° relief) by Walter Tools The SDMT09T3AEN-D57 WSM35G is a square 90° milling insert engineered for machining rostfreier Stahl and heat-resistant superalloys, delivering consistent chip formation and robust edge stability in heavy-duty turning and milling operations Tiger·tec Gold coating for extended life Optimised chip control D57 15° relief angle for stable cutting Square 90° insert, size 09 Reliable performance in demanding alloys The combination of the WSM35G grade and the Tiger·tec Gold coating provides a balance between wear resistance and edge toughness that is especially beneficial when machining rostfreier Stahl and nickel-based alloys. Coated cemented carbide, as used in this insert, increases thermal stability and reduces flank wear under elevated cutting temperatures. The D57 chipbreaker is optimised for secure chip control, reducing the risk of built-up edge and improving process repeatability, which in turn helps maintain consistent cycle times and surface finish quality on critical components. Predictable geometry for consistent results A square 90° format and a 15° relief angle give this insert a predictable cutting behaviour and good radial strength for shoulder and face milling operations. The T3 thickness ensures sufficient rigidity for interrupted cuts and higher feed rates, while the well-defined geometry supports uniform chip splitting and evacuation. For production environments that require reproducible outcomes, these geometric characteristics simplify process parameter settings and shorten setup verification times, supporting higher first-pass yields. Efficiency and tool-life benefits The coated carbide grade focuses on maintaining a stable cutting edge under thermal and mechanical loads, which pays off in longer tool life and fewer indexings. With the Tiger·tec Gold platform, the coating architecture is optimised for adhesion and thermal barrier performance, which helps to extend usable time between tool changes. As a result, throughput improves and overall tooling costs per component can be reduced, particularly when machining materials that tend to work-harden or generate tight chips. Application guidance and integration into production This insert is designed for use in machining rostfreier Stahl and heat-resistant superalloys (ISO groups M and S) and can be integrated into standard indexable milling cutters that accept the SDMT09 form. When adapting cutting data, increase emphasis on coolant strategies and moderate entry feeds to avoid excessive heat concentration at the cutting zone. For process reliability, prefer tool holders and spindle speeds that reduce vibration; the insert’s geometry tolerances (class M) support stable seating and repeatable positioning. Discuss the suitability of the Tiger·tec Gold SDMT09T3AEN-D57 WSM35G for specific production tasks with Metav Werkzeuge — technical consultation and application support are available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data SKU: SDMT09T3AEN-D57-WSM35G-WALTER Label: Fräswendeschneidplatte SDMT09T3AEN-D57 WSM35G Walter Tools Designation: SDMT09T3AEN-D57 ISO designation: SDMT09T3AEN-D57 WSM35G Series: Tiger·tec Gold Grade: WSM35G Manufacturer: Walter Tools Facts Relief angle: 15° Insert size: 09 Thickness: T3 Shape: Square 90° Chipbreaker: D57 Tolerance class: M Special features Coating technology: Tiger·tec Gold Material: coated cemented carbide (WSM35G) Material application: S / M Suitable for rostfreier Stahl and heat-resistant superalloys and titanium Optimised chipformer and stable cutting edge for heavy-duty machining FAQ What materials is this insert best suited for? The SDMT09T3AEN-D57 WSM35G insert is designed for rostfreier Stahl and heat-resistant superalloys (ISO groups M and S), where heat resistance and edge stability are crucial. What does the WSM35G grade provide? WSM35G is a coated cemented carbide grade within the Tiger·tec Gold family that balances thermal resistance and toughness, improving tool life when machining demanding alloys. How does the D57 chipbreaker influence machining? The D57 chipbreaker provides controlled chip formation and evacuation, reducing built-up edge and helping to maintain surface quality and process stability during milling. Is the insert compatible with standard SDMT holders? Yes, the SDMT09T3AEN-D57 form complies with standard SDMT interfaces; the M tolerance class supports repeatable seating in suitable tool holders. Which cutting parameters should be prioritised for best results? Prioritise stable clamping, appropriate coolant or lubrication, and moderate entry feeds; these measures, combined with the insert’s geometry, support consistent performance and longer life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMT09T3AEN-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating, D57 chipbreaker and a 15° relief to achieve reliable milling results across steel, stainless steels and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult the Metav advisors for application support. SDMT09T3AEN‑D57 WSP45G milling insert (Tiger‑tec Gold) — Walter Tools SDMT09T3AEN‑D57 WSP45G is a square 90° milling insert for versatile face and shoulder milling in demanding materials Tiger‑tec Gold PVD coating Square 90° insert form 15° relief angle for robust cutting D57 chipbreaker for consistent chip control Consistent productivity from Tiger‑tec Gold technology The SDMT09T3AEN‑D57 WSP45G insert combines a PVD‑coated carbide grade with the proven Tiger‑tec Gold system to deliver predictable wear behaviour and extended tool life. The WSP45G grade is formulated for a broad material range, supporting efficient machining of steel, stainless steels and heat‑resistant superalloys. This balanced specification reduces unplanned tool changes and maintains surface quality, which contributes to smoother production cycles and lower overall operating costs. Reliable cutting geometry and controlled chip breaking A square 90° form with a 15° relief angle offers robustness at corners and stability during interrupted cuts, while the D57 chipbreaker promotes repeatable chip formation in a variety of cutting conditions. These geometry features translate into improved process stability and easier chip evacuation in both conventional and climb milling. The defined relief and chipcontrol geometry also protect the cutting edge against build‑up, supporting consistent component tolerances and finishing requirements. Durable grade and fit for diverse applications The insert's T3 thickness and tolerance class M ensure precise seating and safe clamping in standard indexable cutter bodies, reducing vibration and improving repeatability. The WSP45G grade is optimised for toughness and edge stability, making it suitable for mixed production runs and applications where heat and adhesion are critical factors. For workshop planners this means fewer tool variants are required, simplifying inventory while maintaining flexibility across workpieces and materials. Secure high‑performance milling with Walter Tools Tiger‑tec Gold inserts — contact Metav Werkzeuge for availability and technical consultation Technical data Article number: SDMT09T3AEN‑D57‑WSP45G‑WALTER Product type: milling insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WSP45G Facts Insert form: Square 90° Relief angle: 15° Chipbreaker: D57 Thickness: T3 Size designation: 09 Tolerance class: M Special features PVD‑coated carbide (Tiger‑tec Gold) Material application: steel (P), stainless steels (M), superalloys/titanium (S) Robust edge stability and broad material coverage Suitable for face and shoulder milling FAQ What materials is this insert designed to machine? The SDMT09T3AEN‑D57 WSP45G insert is suitable for steel, stainless steels and heat‑resistant superalloys or titanium, reflecting the P/M/S designation of the WSP45G grade. How does the D57 chipbreaker influence performance? The D57 chipbreaker provides controlled chip formation and evacuation under a wide range of cutting conditions, helping to maintain surface finish and reduce the risk of built‑up edge when using the WSP45G grade. Is the insert compatible with standard indexable cutter bodies? Yes; the T3 thickness and tolerance class M ensure precise seating and compatibility with common milling cutter systems designed for SDMT‑style inserts. What production benefits does the Tiger‑tec Gold coating offer? The Tiger‑tec Gold PVD coating improves wear resistance and edge stability, extending tool life and supporting consistent part quality across mixed‑material production. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMT09T3AZN-D57 WKK25G WKK25G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WKK25G grade, optimised for abrasive cast iron applications, to achieve stable chip formation and extended edge life. The square 90° geometry with a 15° relief ensures robust engagement in heavy milling passes. Order the insert directly via Metav Werkzeuge or consult our machining specialists for tailored recommendations. SDMT09T3AZN-D57 WKK25G milling indexable insert — square 90°, Tiger·tec Gold | Walter Tools SDMT09T3AZN-D57 WKK25G is a high-performance indexable milling insert designed for productive machining of cast iron components with consistent chip control. Tiger·tec Gold coating for wear resistance Optimised for cast iron machining Square 90° geometry for robust milling D57 chipbreaker for consistent chips Reliable machining of cast iron components The combination of the WKK25G grade and the Tiger·tec Gold coating is engineered for the specific demands of cast iron machining. The grade is tuned to resist abrasive wear and handle the frequently short, brittle chips produced by grey and ductile cast irons. The insert’s D57 chipbreaker promotes repeatable chip formation and evacuation, which reduces the risk of built-up edge and minimises interruptions in production. For shops that run uninterrupted milling cycles, this leads to fewer tool changes and steadier component quality. Consistent productivity and longer edge life With a 15° relief angle and square 90° geometry, the insert delivers a balance between cutting stability and edge strength; the larger contact zone supports heavy cuts while limiting chipping. The tolerance class M indicates manufacturing precision suitable for serial production where repeatability matters. These technical attributes translate into measurable productivity: stable cutting behaviour, predictable wear patterns and reduced scrap. The coated carbide substrate, as part of the Tiger·tec Gold family, offers a wear-resistant surface that extends service intervals under high-abrasion conditions. Easy integration and predictable handling in the workshop The insert’s designation (SDMT09T3AZN‑D57 WKK25G) and the T3 thickness conform to common tool-holder standards for indexable milling systems, which simplifies replacement and tool management. The square 90° form provides straightforward orientation and is suitable for face and shoulder milling operations where robustness is required. For less experienced technicians, the terms are straightforward: a chipbreaker shapes and directs chips; a grade defines the coating and substrate behaviour; tolerance class refers to dimensional precision. These characteristics ensure predictable results when the insert is applied in the intended cast iron range. For tailored application advice or fast supply of Walter Tools SDMT09T3AZN-D57 WKK25G inserts, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SDMT09T3AZN-D57-WKK25G-WALTER Manufacturer: Walter Tools Product type: Milling indexable insert Designation: SDMT09T3AZN-D57 WKK25G Core data Insert size: 09 Thickness: T3 Relief angle: 15° Tolerance class: M Chipbreaker: D57 Geometry: Square 90° Special features Coating: Tiger·tec Gold Grade: WKK25G Series: Tiger‑tec Gold Material suitability: Cast iron (K) Execution: T FAQ Which materials is this insert intended for? The WKK25G grade is optimised for cast iron; the SDMT09T3AZN‑D57 WKK25G insert is specifically tuned to handle abrasive cast‑iron materials with short, breaking chips. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating improves wear resistance and thermal stability, which helps maintain cutting-edge integrity under the abrasive conditions typical of cast‑iron machining. How does the D57 chipbreaker affect machining? The D57 chipbreaker is designed to shape and evacuate chips reliably, promoting stable cutting and reducing the likelihood of built‑up edge during intermittent or continuous milling. What does the tolerance class M mean for production use? Tolerance class M denotes a production precision that supports repeatable seating and consistent indexing in series production, contributing to uniform component quality. Is the geometry suitable for heavy milling operations? Yes; the square 90° geometry combined with a 15° relief provides a robust contact area that is well suited to heavier face and shoulder milling where stability is critical. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; Walter Tools is a brand of Walter AG Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; there is no connection between our company and the named brands. The offered article is original, factory‑new goods from the manufacturer Walter Tools.
SDMT09T3AZN-D57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, robust square geometry and a dedicated chipbreaker for stable, repeatable milling results; order directly via Metav Werkzeuge or consult the team for cutting data and grade recommendations. SDMT09T3AZN-D57 WKP25S milling insert by Walter Tools — Tiger·tec Silver, for steel and cast iron SDMT09T3AZN-D57 WKP25S is a square 90° indexable milling insert designed for medium to heavy machining of steel and cast iron, offering a wear-resistant coating and a chipbreaker matched to typical milling chips and forces. Tiger·tec Silver coating for durability For steel and cast iron machining Square 90° geometry for secure clamping 15° clearance and T3 thickness Coating and grade that sustain process stability The combination of the Tiger·tec Silver coating and the WKP25S grade provides high abrasive resistance and a stable cutting edge across interrupted and continuous cuts. The coated cemented carbide composition is optimised for the thermal and mechanical loads encountered when machining ISO P (steel) and ISO K (cast iron) workpieces. This means fewer insert changes and more predictable tool life, which directly supports higher machine utilisation. The D57 chipbreaker controls chip formation and evacuation to reduce the risk of re-cutting and to promote consistent surface finish, even under variable feed conditions. Geometry that enhances clamping security and surface quality The square 90° plate form with a 15° clearance angle and T3 thickness offers structural rigidity and reliable seat contact in standard milling toolholders. The geometry minimises deflection and vibration for interrupted cuts or shoulder milling, translating into improved dimensional stability and lower scrap rates. The M tolerance class ensures repeatable positioning in multi-insert cutters, while the defined chipbreaker reduces cutting forces and helps maintain consistent roughness values on the machined component. Real workshop benefits: productivity and predictable results In practice, choosing this insert supports faster setup cycles and fewer unplanned stops. The design and coating combination of this grade aim to reduce flank wear and maintain a sharper cutting edge for longer, which often results in lower overall tooling costs per produced part. For production environments where short-term variability occurs — mixed batch sizes or varying heat-treated states of workpieces — the insert’s balanced performance for steel and cast iron assists in keeping process windows tight and surface quality consistent. The result is a measurable improvement in throughput without compromising on finish or tolerance control. Contact Metav Werkzeuge for tailored cutting data, sample recommendations and integration advice for the SDMT09T3AZN-D57 WKP25S milling insert Technical data SKU: SDMT09T3AZN-D57-WKP25S-WALTER Article: SDMT09T3AZN-D57 WKP25S Manufacturer: Walter Tools Type: Milling insert (indexable) Facts Free angle: 15° Insert size: 09 Thickness: T3 Form: Square 90° Tolerance class: M Chipbreaker: D57 Special features Coating: Tiger·tec Silver Grade: WKP25S Material suitability: Steel (P) and Cast iron (K) Series: Tiger-tec Silver Execution: T FAQ What materials is this insert recommended for? This insert is specified for machining steel (ISO P) and cast iron (ISO K); the WKP25S grade and Tiger·tec Silver coating are tailored to these material groups. Which insert geometry ensures stable clamping for face milling? The square 90° plate form and T3 thickness provide a rigid seating and stable clamping when used in compatible milling cutters. How does the D57 chipbreaker affect machining? The D57 chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of chip-related interruptions. Is the insert suitable for interrupted cuts and heavy-duty milling? Yes; the combination of grade, coating and geometry is designed to withstand the loads of interrupted and moderate-heavy milling operations. Can the SDMT09T3AZN-D57 WKP25S be used in multi-insert tooling with tight runout requirements? The M tolerance class supports repeatable positioning in multi-insert cutters, aiding dimensional consistency under typical shop conditions. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMT09T3AZN-D57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WKP35G grade for durable, productive milling in steel and cast iron; the square 90° geometry and 15° relief deliver stable cutting and reliable edge life. Order the SDMT09T3AZN-D57 WKP35G milling insert directly via Metav Werkzeuge or ask our consultants for machining advice. SDMT09T3AZN-D57 WKP35G – milling insert, Tiger·tec Gold, for steel and cast iron | Walter Tools The SDMT09T3AZN-D57 WKP35G is a square 90° milling insert with a 15° relief and D57 chipbreaker, engineered for productive face and shoulder milling in steel and cast iron applications Tiger·tec Gold coating for extended tool life WKP35G grade tailored for steel and cast iron Square 90° geometry for robust milling edges 15° relief and T3 thickness for stable cutting High-efficiency machining with a premium coating The combination of the Tiger·tec Gold coating and the WKP35G carbide grade enhances wear resistance and thermal stability, which translates into longer tool life and fewer index changes during series production. As a milling insert from Walter Tools, this grade is optimised for the heat and chip formation typical of steel and the abrasive nature of cast iron, reducing unplanned downtime. The coating reduces built-up edge and improves surface finish while maintaining consistent performance over longer tool cycles. Robust geometry that stabilises the cutting process The square 90° configuration together with T3 thickness and a 15° relief provides a solid seat and strong cutting edge for heavy-duty milling tasks. The integrated chipbreaker D57 controls chip form and evacuation, reducing the risk of re-cutting and improving process stability. In practice this geometry supports predictable tool behaviour under intermittent or interrupted cuts, helping to keep machining tolerances stable and part quality high. Clear material suitability and practical application guidance Designed for ISO groups P (steel) and K (cast iron), this insert is suitable for a broad range of steel grades and common cast irons according to ISO 513 recommendations. The WKP35G grade is aimed at productive finishing and medium‑to‑roughing operations where a balance of wear resistance and toughness is required. When selecting cutting parameters, prioritise feed and depth values recommended for the workpiece material family to exploit the insert’s strength while avoiding excessive thermal load. Process benefits: productivity and predictable outcomes Using this insert helps to reduce cycle time through stable edge life and consistent chip control, contributing to overall productivity improvements on the shop floor. Fewer index changes and dependable cutting behaviour support downstream operations by delivering parts with consistent surface quality and dimensional accuracy. For production environments seeking lower tooling costs per part, the combination of geometry and grade offers a measurable advantage in repeatability and tool consumption. For specification assistance or to secure fast delivery of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and availability Technical data Article number: SDMT09T3AZN-D57-WKP35G-WALTER Designation: SDMT09T3AZN-D57 WKP35G Series: Tiger·tec Gold Grade: WKP35G Manufacturer: Walter Tools Facts Geometry: Square 90° Relief angle: 15° Thickness code: T3 Plate size: 09 Tolerance class: M Special features Chipbreaker: D57 Applicable materials: Steel (P) and Cast iron (K) Execution: T Material WPL: P / K Plate form: Quadrat 90° Series description: Coated carbide, Tiger·tec Gold technology FAQ What materials is this insert suited for? The SDMT09T3AZN-D57 WKP35G insert from Walter Tools is specified for machining steel (P) and cast iron (K) according to ISO 513 material groups. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on this insert improves wear resistance and thermal stability, prolonging cutting edge life and enabling consistent performance in the SDMT09T3AZN-D57 WKP35G. How does the D57 chipbreaker affect machining? The chipbreaker D57 controls chip formation and evacuation, promoting stable chip flow and reducing re-cutting, which enhances process reliability for the Walter Tools milling insert. Is this insert suitable for stainless steel? Stainless steel is not listed among the specified applications for the SDMT09T3AZN-D57 WKP35G; suitability for rostfreier Stahl is not indicated in the available data. What is the plate geometry and how does it influence application? The square 90° geometry offers strong cutting edges for face and shoulder milling, making the insert robust for intermittent cuts and heavy engagement situations. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SDMT09T3AZN-D57 WPP35G Wendeplatten - Walter Tools
High-performance coated carbide and a tailored chipbreaker provide durable, consistent milling of steel components while maintaining low cost per part. The combination of Tiger·tec Gold coating and the D57 chipformer ensures stable span formation and extended life. Order the SDMT09T3AZN-D57 WPP35G via Metav Werkzeuge or contact our consultants for application recommendations. SDMT09T3AZN-D57 WPP35G milling insert — Tiger·tec Gold coated, for steel (Walter Tools) The SDMT09T3AZN-D57 WPP35G is a square indexable milling insert engineered for productive steel machining, combining a coated carbide grade with an optimised chipbreaker for stable, repeatable results in general milling operations. Tiger·tec Gold coating for extended tool life Optimised D57 chipbreaker for reliable chip control Square 90° insert with 15° relief, T3 thickness Consistent throughput through advanced coating and grade The coated carbide grade WPP35G from the Tiger·tec Gold family is formulated for machining steel, specifically to cope with the typical heat and chip formation encountered in such materials. The coating reduces flank wear and improves thermal stability, which translates directly into longer tool life and fewer tool changes on the production line. For production environments where cycle time and predictable tool-change intervals matter, this insert offers a measurable improvement in uptime and a lower cost per finished part. The composition of the grade balances wear resistance and toughness, making it suitable for a wide spectrum of steel applications from standard unalloyed steels to more demanding grades. Geometry and tolerance that support precision and process reliability The square 90° plateform combined with a 15° relief angle and T3 thickness provides robust cutting geometry for milling operations that demand stability and repeatability. The integrated D57 chipbreaker is designed to control chip flow during varying depths of cut, reducing the risk of built-up edge and improving surface finish. The insert’s tolerance class M ensures interchangeability and consistent clamping in standard toolholders, which is essential for automated set-ups and repeat production runs. These geometric choices enhance cutting stability and reduce vibration, improving dimensional accuracy and surface quality while simplifying tool selection for mixed-production shops. Practical handling and application guidance for workshop use This indexable insert is delivered in the SDMT09T3AZN-D57 format, allowing quick replacement and minimal set-up time when mounted in compatible cutters. It is particularly effective in operations that prioritise stable span formation and consistent tool life. The grade’s balance—listed as wear-resistant to universal—means the insert handles a range of steel machining tasks, from general finishing to semi-roughing, while preserving edge security. For best results, pair the insert with appropriate cutter geometry and cutting parameters tuned to the steel grade being machined; the D57 chipbreaker performs best with medium to positive feeds where controlled chip segmentation is required. Clear labelling and standard dimensions support fast inventory management and straightforward integration into existing tooling systems. Contact Metav Werkzeuge for tailored cutting parameters or application support on Walter Tools inserts at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SDMT09T3AZN-D57-WPP35G-WALTER Product: Fräswendeschneidplatte Designation: SDMT09T3AZN-D57 WPP35G Series: Tiger·tec Gold Grade: WPP35G Manufacturer: Walter Tools Facts Free angle: 15° Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: M Chipbreaker: D57 Special features Coating technology: Tiger·tec Gold Suitable for: Steel (P) Insert type: SDMT09T3AZN-D57 Execution: T FAQ What materials is this insert suitable for? The SDMT09T3AZN-D57 WPP35G is designed primarily for steel machining; the WPP35G grade is optimised for the heat and chip characteristics typical of steel. How does the D57 chipbreaker affect machining? The D57 chipbreaker promotes controlled chip segmentation and consistent chip evacuation, improving surface finish and reducing the risk of built-up edge when milling steel with the SDMT09T3AZN-D57 WPP35G insert. Is this insert suitable for automated, repeat production? Yes. The combination of tolerance class M, standard square geometry and the Tiger·tec Gold coating makes the SDMT09T3AZN-D57 WPP35G well suited to automated and repeatable milling processes. Can this insert be used for both roughing and finishing? The WPP35G grade offers a balance between wear resistance and toughness, allowing the insert to perform in a range of operations from semi-roughing to finishing in steel applications. What is the main benefit of the Tiger·tec Gold coating? The Tiger·tec Gold coating increases thermal stability and wear resistance, which extends tool life and supports higher productivity for the SDMT09T3AZN-D57 WPP35G. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are used solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is original, factory-new merchandise of the manufacturer Walter Tools.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com