SDMT06T208-F57 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of versatile Tiger·tec Gold performance, stable chip formation and precise 0.8 mm corner geometry for dependable milling across steel, stainless steel and superalloys; order directly via Metav Werkzeuge or consult our team for application advice. SDMT06T208-F57 WSP45G milling insert — Tiger·tec Gold, 15° clearance (Walter Tools) The SDMT06T208-F57 WSP45G is a square 90° milling insert designed for versatile PVD-coated carbide milling applications across steels, stainless steels and heat-resistant alloys. Tiger·tec Gold PVD-coated carbide Suitable for steel, stainless and superalloys Square 90° form with 0.8 mm corner radius 15° clearance, chipbreaker F57 Consistent cutting performance across demanding materials The SDMT06T208-F57 WSP45G insert delivers consistent cutting performance by combining a PVD-coated hardmetal grade with a geometry tuned for stable chip formation. The WSP45G grade, part of the Tiger·tec Gold series, is engineered to cope with the thermal and mechanical demands of machining steel, stainless steel and superalloys; this means fewer unexpected tool changes and more predictable cycle times. The inclusion of a defined chipbreaker F57 helps to fragment and evacuate chips efficiently, reducing the risk of built-up edge and improving surface finish in mixed-production environments. For production planners, this translates into reproducible results across different workpiece materials and a lower overall tooling overhead. Improved edge stability and extended tool life Edge life benefits from the combination of a robust coating and a controlled cutting geometry. The insert’s 0.8 mm corner radius increases edge strength for interrupted cuts and shoulder milling, while the Tiger·tec Gold coating enhances wear resistance under elevated temperatures. The tolerance class M supports consistent seating and repeatable indexability in tool holders, helping to maintain dimensional accuracy throughout tool life. Explained simply, a slightly larger corner radius trades minimal detail loss for substantially better edge stability, which is particularly valuable where tool-change downtime must be minimised. Seamless integration into productive milling operations The square 90° form and 15° clearance ensure the insert is suitable for a range of milling tasks from face and shoulder milling to more demanding slotting where a strong cutting edge is required. The plate thickness designation and standard SDMT format provide reliable clamping in common cutter bodies; this simplifies stocking and replacement logistics on the shop floor. Because the insert is optimised for a broad material spectrum (P/M/S), tool selection becomes more efficient and cycle planning simpler, supporting leaner workflows and higher machine uptime. For precise, high-process-security milling with Walter Tools’ Tiger·tec Gold inserts, contact Metav Werkzeuge for ordering and technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SDMT06T208-F57-WSP45G-WALTER Label: Fräswendeschneidplatte SDMT06T208-F57 WSP45G Walter Tools Manufacturer: Walter Tools Core characteristics Clearance angle: 15° Corner radius: 0.8 mm Plate form: Square 90° Plate size: 06 Thickness: T2 Tolerance class: M Designs and special features Series: Tiger·tec Gold Grade: WSP45G (PVD-coated carbide) Chipbreaker: F57 Material applicability: steel (P), stainless steel (M), superalloys/titanium (S) Execution: T Insert designation: SDMT06T208-F57 WSP45G FAQ What materials are suitable for this insert? The SDMT06T208-F57 WSP45G insert is suited for steel, stainless steel and heat-resistant superalloys, as the WSP45G grade and Tiger·tec Gold coating are formulated for these material groups. How does the chipbreaker F57 influence machining? The chipbreaker F57 on this Walter Tools milling insert promotes controlled chip formation and evacuation, reducing built-up edge and improving surface finish during continuous and moderate interrupted cuts. What advantages does the 0.8 mm corner radius provide? A 0.8 mm corner radius increases edge strength and resistance to chipping, offering longer tool life in shoulder milling and interrupted-cut applications while maintaining acceptable dimensional accuracy. Which milling applications are best for the square 90° geometry? The square 90° form is ideal for face and shoulder milling and general-purpose slotting where a solid cutting edge and efficient material removal are required. Is the insert compatible with standard cutter bodies? Yes; the SDMT format and T2 thickness ensure compatibility with common indexable milling cutter bodies, providing repeatable seating and easy replacement. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMT06T212-F57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WKP35G grade for reliable machining of steel and cast iron; the 15° clearance and 1.2 mm corner radius deliver consistent chip control and edge strength in demanding production environments. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. SDMT06T212-F57 WKP35G — Indexable Milling Insert for Steel & Cast Iron (Walter Tools) A SDMT06T212-F57 WKP35G insert designed for high-productivity milling of steel and cast iron in general workshop and production settings. Tiger·tec Gold coating for long tool life WKP35G grade for steel and cast iron 15° clearance angle for secure chip control 1.2 mm corner radius, square 90° geometry High-performance coating and material compatibility that reduces costs per part The combination of Tiger·tec Gold coating with the WKP35G carbide grade offers a measurable improvement in wear resistance and process stability when machining ISO groups P and K. The coating is engineered to withstand the thermal and abrasive stresses typical of turning and milling operations, which translates into longer tool life and fewer insert changes. For production planners this means more predictable tool cycles and reduced downtime; for operators it means steady cut quality across batch runs. The insert’s material compatibility is specified according to ISO 513: P denotes suitability for unalloyed and alloyed steel, while K indicates effectiveness on cast iron, so selection is clear and aligned with common industrial classifications. Geometry and edge design that secure surface finish and chip flow A designed clearance of 15° combined with a 1.2 mm corner radius and the square 90° plate form offers a robust cutting edge that resists chipping under interrupted cuts while helping to manage chip formation. The F57 chipbreaker geometry supports controlled fragmentation on a wide range of steels and grey or nodular cast irons, reducing the risk of built-up edge and improving surface finish. Edge strength from the thicker T2 plate body and the square geometry increases stability in heavier passes, enabling higher metal removal rates with consistent dimensional results. These geometric decisions result in a practical balance between productivity and component quality for batch and continuous machining. For application advice or order placement of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for a tailored recommendation: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: SDMT06T212-F57-WKP35G-WALTER Product: Fräswendeschneidplatte SDMT06T212-F57 WKP35G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WKP35G Facts Clearance angle: 15° Corner radius: 1.2 mm Plate form: Quadrat 90° Plate size: 06 Plate thickness: T2 Tolerance class: M Special features Material suitability: P / K (steel and cast iron) Chipbreaker: F57 Execution: T Series and grade description: coated carbide, Tiger·tec Gold Intended application: indexable milling insert for general machining FAQ What materials is this insert suitable for? The SDMT06T212-F57 WKP35G insert from Walter Tools is suitable for ISO groups P and K, meaning it is optimised for machining various steel grades and cast iron materials. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold on the WKP35G grade reduces abrasive wear and improves thermal stability, so the insert maintains cutting edge integrity longer during high-volume milling. What benefits does the 1.2 mm corner radius provide? A 1.2 mm corner radius increases edge strength, improving resistance to chipping during interrupted cuts and supporting better surface finish on challenging passes. Is the F57 chipbreaker suitable for mixed production runs? Yes, the F57 chipbreaker is configured to provide reliable chip control across a range of steels and cast irons, making the insert versatile for mixed-production environments. Can this insert be used for heavy roughing cuts? The square 90° geometry, T2 thickness and WKP35G grade give the insert sufficient edge robustness for many roughing applications, though final process parameters should be validated against specific machine and workpiece conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMT06T212-F57 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and a purpose-designed F57 chipbreaker for steady chip control and long tool life; the insert is ideal for efficient steel machining and stable production cycles. For ordering or machining advice, contact Metav Werkzeuge for tailored cutting data and availability. SDMT06T212-F57 WPP35G — Indexable milling insert for steel (Tiger·tec Gold) — Walter Tools The SDMT06T212-F57 WPP35G is a square indexable milling insert engineered for high-demand steel machining, combining a Tiger·tec Gold coated carbide grade with an F57 chipbreaker for reliable chip control and process stability. Tiger·tec Gold coated carbide grade WPP35G 1.2 mm corner radius for robust engagement 15° clearance angle for secure cutting geometry Square 90° form, size 06 for face and shoulder milling Reliable performance for steel applications The coated carbide grade from the Tiger·tec Gold series delivers consistent wear resistance and predictable tool life when machining steels. The insert’s composition and coating technology are optimised to handle the heat and chip formation typical for steels, which results in fewer unplanned tool changes and improved uptime. With the WPP35G grade, this geometry supports a balanced combination of toughness and wear resistance, making it suitable for a broad range of steel operations from roughing to semi-finishing. Secure chip control and machining quality Integrated into the insert is the F57 chipbreaker, designed to shape and evacuate chips efficiently under varying cutting conditions. This leads to more predictable surface finishes and reduced risk of re-cutting damaged chips. The moderate 1.2 mm corner radius enhances edge strength during interrupted cuts, while the 15° clearance angle helps to maintain a stable cutting edge. These features together support longer periods between tool inspections and more consistent component quality. Practical integration and process benefits The square 90° insert, size 06, offers versatile mounting options for face and shoulder milling operations, simplifying tool inventory and enabling straightforward tool path strategies. Its classification for steel (ISO group P) facilitates correct machining parameter selection according to standardised material groups. For production planning, the insert’s predictability contributes to improved process reliability and easier calculation of cost per part when compared with less consistent grades. Contact Metav Werkzeuge for application-specific cutting data, delivery options and to discuss how Walter Tools inserts can optimise machining of steel parts Technical Data SKU: SDMT06T212-F57-WPP35G-WALTER Name: SDMT06T212-F57 WPP35G Brand: Walter Tools Series: Tiger·tec Gold Grade: WPP35G Facts Clearance angle: 15° Corner radius: 1.2 mm Insert form: Square 90° Size: 06 Thickness: T2 Tolerance class: M Special features Coating: Tiger·tec Gold coated carbide Chipbreaker: F57 Material application: Steel (ISO group P) Execution: T (top/relevant geometry) Suitable for face and shoulder milling FAQ What materials is this insert best suited for? The SDMT06T212-F57 WPP35G from Walter Tools is specifically developed for machining steel (ISO group P), where its Tiger·tec Gold coated carbide provides robust wear resistance and good heat handling. How does the F57 chipbreaker affect machining? The F57 chipbreaker on this insert improves chip formation and evacuation, resulting in more consistent surface quality and reduced risk of chip-related tool damage during steel machining. What benefits does the 1.2 mm corner radius provide? A 1.2 mm corner radius increases edge strength and resistance to edge chipping, particularly useful in interrupted cuts and applications with varying engagement angles. Can this insert be used for finishing passes? Yes, the coated grade and geometry support a range of cutting conditions from roughing to semi-finishing on steel, offering a balance between toughness and wear resistance. Is there guidance available for cutting parameters? Walter Tools and Metav Werkzeuge can provide recommended cutting data for specific steels and machines; refer to the grade characteristics and the Tiger·tec Gold series recommendations when selecting speeds and feeds. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMT06T212-F57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of a heat-resistant Tiger·tec Gold grade and a robust geometry to secure stable cutting and predictable tool life. The insert’s WSM35G substrate and F57 chipformer deliver reliable chip control when machining challenging materials; order directly via Metav Werkzeuge or consult the team for application support. SDMT06T212-F57 WSM35G indexable milling insert — square 90° format, 15° relief The SDMT06T212-F57 WSM35G is an indexable milling insert engineered for heavy-duty finishing and semi-finishing of rostfreier Stahl and heat‑resistant superalloys, combining a Tiger·tec Gold coating with a geometry that prioritises edge stability. Tiger·tec Gold coated WSM35G Optimised chipformer F57 15° relief angle for consistent cutting Square 90° insert, 1.2 mm corner radius Durable grade for demanding alloys and predictable tool life The WSM35G grade, based on the Tiger·tec Gold coating technology, is a coated carbide designed to withstand the thermal and mechanical loads typical when machining rostfreier Stahl and other difficult alloys. The coating improves heat resistance and reduces flank wear, which translates into longer tool life and fewer tool changes on the shop floor. For production environments where consistency is essential, a grade that supports stable chip formation reduces unexpected downtime and helps maintain component tolerances throughout long runs. Geometry that improves process security and surface quality A square 90° plate with a 1.2 mm corner radius and a 15° relief angle offers a balance between edge strength and cutting performance. The integrated chipformer F57 is optimised to break and evacuate chips when cutting ductile, adhesive materials, thereby reducing built-up edge and minimising rework. Explaining the chipformer: it is a small, engineered groove and land on the insert face that controls chip curl and breakage, so the machining process becomes more repeatable and surface finish is improved without complex parameter changes. Workflow benefits: fewer interruptions, easier indexing Using a robust indexable milling insert reduces non-productive time because inserts can be rotated to a fresh cutting edge without regrinding. The plate’s standard format and tolerance class M ensure interchangeability and repeatable seating in compatible cutter bodies, supporting stable fixture set-up and simpler inventory management. In practice, this means fewer adjustment cycles and a steadier production pace. When combined with the thermal resilience of the coating, the result is a measurable reduction in process variability and improved overall equipment effectiveness. For tailored recommendations on using Tiger·tec Gold inserts for rostfreier Stahl or superalloy applications, contact Metav Werkzeuge—the team will advise on the correct grade, geometry and cutter match for each operation; eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data SKU: SDMT06T212-F57-WSM35G-WALTER Article: Fräswendeschneidplatte SDMT06T212-F57 WSM35G Walter Tools Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 1.2 mm Plate size: 06 Plate form: Quadrat 90° Thickness: T2 Tolerance class: M Special features Series: Tiger-tec Gold Grade: WSM35G Chipformer: F57 Material applicability: S / M Suitable for: rostfreier Stahl and heat‑resistant superalloys FAQ What materials is this insert designed for? The SDMT06T212-F57 WSM35G insert is designed primarily for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), offering thermal stability and edge robustness for these challenging materials. How does the chipformer F57 affect machining? The chipformer F57 on this plate directs and breaks chips efficiently; in combination with the WSM35G grade it promotes stable chip formation and reduces the risk of built‑up edge during high‑temperature cutting. Can the insert be used in finishing and semi‑finishing operations? Yes. The square 90° format with a 1.2 mm corner radius and 15° relief angle provides the edge strength required for semi‑finishing and finishing steps while maintaining good surface quality. Which series and manufacturer produce this plate? This plate belongs to the Tiger·tec Gold series from Walter Tools, produced to support productive machining of difficult alloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMT06T212-F57 WSM45X WSM45X Wendeplatten - Walter Tools
The combination of robust edge stability, optimised chip control and a coated‑carbide grade designed for high temperatures delivers consistently productive machining of stainless steels and heat‑resistant alloys. Order the SDMT06T212‑F57 WSM45X milling insert directly via Metav Werkzeuge or contact the consultancy team for tailored application advice. SDMT06T212‑F57 WSM45X milling indexable insert — optimised for stainless steel and superalloys — Walter Tools SDMT06T212‑F57 WSM45X is a coated carbide milling insert engineered for heavy‑duty machining of stainless steel (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), offering a balance of edge stability and chip control in demanding production environments. Coated carbide grade WSM45X Chipbreaker F57 for controlled chip formation 15° clearance and 1.2 mm corner radius Square 90° form, size 06, thickness T2 Consistent performance for demanding materials The SDMT06T212‑F57 WSM45X insert brings a material‑specific approach to milling: the WSM45X coating is formulated to withstand elevated cutting temperatures and the abrasive, adhesive tendencies of stainless steel and superalloys. This results in stable cutting edges and reduced built‑up edge, which translates into fewer interruptions and steadier component quality. Specified as a square 90° indexable insert with a 1.2 mm corner radius, the geometry supports both pocketing and shoulder operations where robustness and repeatable surface finish are required. Reliable chip control and longer tool life The integrated chipbreaker F57 and the coated carbide substrate work together to create predictable chip shapes and evacuation, reducing the risk of re‑cutting and tool breakage. The 15° clearance minimises rubbing on the flank face and helps maintain cutting‑edge integrity, while the insert’s tolerance class M ensures dimensional interchangeability in modular toolholders. These characteristics support higher average cutting speeds and steady feed rates, which improve process efficiency and contribute to extended tool life under industrial cycle conditions. Practical selection and application guidance For best results, pair the insert with a rigid toolholder matched to a square 90° seat and maintain consistent coolant application or appropriate cutting fluids for stainless steel and nickel‑based alloys. The size 06 format and T2 thickness offer a compact footprint with enough mass for stability; this makes the insert suitable for both series production and specialised workpieces where vibration damping and secure clamping are important. Selection of feeds and speeds should reflect material batch variability — conservative increases in feed per tooth will often yield better chip formation without compromising surface quality. For machining applications that demand heat resistance and reliable chip control, contact Metav Werkzeuge to discuss Walter Tools’ SDMT06T212‑F57 WSM45X insert and to obtain application‑specific recommendations — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data SKU: SDMT06T212‑F57‑WSM45X‑WALTER Label: Fräswendeschneidplatte SDMT06T212‑F57 WSM45X Walter Tools Manufacturer: Walter Tools Product type: milling indexable insert Grade/series: Walter Schneidstoffsorte - Serie offen Designation (without grade): SDMT06T212‑F57 ISO designation: SDMT06T212‑F57 WSM45X Facts Clearance angle: 15° Corner radius: 1.2 mm Insert form: Square 90° Insert size: 06 Thickness: T2 Tolerance class: M Special features Coating / grade: WSM45X (coated carbide) Chipbreaker: F57 Material suitability: stainless steel (ISO M), heat‑resistant superalloys / titanium (ISO S) Material family: S / M FAQ What materials is this insert best suited for? The SDMT06T212‑F57 WSM45X insert is optimised for stainless steel (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), where the WSM45X coating improves thermal resistance and edge stability. How does the chipbreaker F57 benefit machining? The chipbreaker F57 promotes consistent chip formation and evacuation, reducing re‑cutting and helping to preserve the integrity of the cutting edge during heavy or interrupted cuts with the Walter Tools insert. Which insert geometry helps with robustness and surface finish? The square 90° form combined with a 1.2 mm corner radius provides a good compromise between strength and surface quality, making the insert suitable for shoulder milling and roughing with stable clamping. Is the insert interchangeable in standard toolholders? Yes — the insert’s tolerance class M and standard SDMT designation enable interchangeability in compatible square‑seat toolholders designed for size 06 inserts. What operating measures extend tool life for these grades? Using appropriate coolant or cutting fluid for stainless steel and superalloys, maintaining consistent feeds, and ensuring rigid clamping will help the WSM45X coated carbide maintain edge life and process stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and product names remain the property of their respective owners. The offered article is an original, factory‑new product of the manufacturer.
SDMT06T212-F57 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold wear resistance, a reliable F57 chipbreaker and a compact square format that reduces downtime and extends tool life; order directly via Metav Werkzeuge or consult the technical team for optimisation and stocking. SDMT06T212-F57 WSP45G indexable milling insert (Tiger‑tec Gold) – Walter Tools SDMT06T212-F57 WSP45G is an indexable milling insert designed for general milling applications across steel, rostfreier Stahl and heat-resistant alloys Tiger‑tec Gold PVD coating for edge stability Square 90° form with 1.2 mm corner radius Grade WSP45G for P, M and S material groups M tolerance class, 15° clearance angle Durable PVD coating for consistent performance The insert is manufactured in the Tiger‑tec Gold family and the WSP45G grade, a PVD-coated carbide formulation engineered for edge stability and extended life in milling operations. This coating strategy improves resistance against abrasive wear and builds a predictable tool-life profile when machining Stahl and rostfreier Stahl, where chemical and thermal loads can otherwise shorten insert life. For operations that demand repeatable results, the coated grade reduces micro-chipping and supports longer intervals between indexings, which benefits both process reliability and cost-efficiency. Geometry that reduces downtime and improves surface quality A square 90° plate form with a 1.2 mm corner radius and a 15° clearance angle gives a robust cutting edge suited to shoulder and face milling. The combination of M tolerance and the T2 plate thickness ensures consistent seating in standard SDMT holders, limiting run-out and vibration. As a result, finish quality improves and tool-change frequency drops. The moderate corner radius balances edge strength with acceptable cutting forces, so productive parameters can be pushed without risking premature edge breakdown—especially important when alternating between Stahl and tougher alloys. Chip control and material versatility for milling shops The F57 chipbreaker is tuned for secure chip formation in a wide material range: P (Stahl), M (rostfreier Stahl) and S (Titan and heat-resistant superalloys). It promotes controlled chip segmentation and evacuation, reducing the risk of build-up and surface damage during interrupted cuts. This versatility makes the insert appropriate for mixed production environments where one indexable plate must perform reliably across different component materials. For process planners, the predictable chip behaviour simplifies coolant strategy and helps maintain stable cutting forces throughout a machining cycle. If machining parameters need refinement, Metav Werkzeuge provides further machining guidance. Contact Metav Werkzeuge today to specify the right Tiger‑tec Gold WSP45G grade for particular Stahl or rostfreier Stahl tasks and secure optimal insert allocation for the production line Technical Data SKU: SDMT06T212-F57-WSP45G-WALTER Article designation: SDMT06T212-F57 WSP45G Manufacturer: Walter Tools Product type: Indexable milling insert Facts Clearance angle: 15° Corner radius: 1.2 mm Plate size: 06 Plate form: Square 90° Thickness: T2 Tolerance class: M Edge breaker: F57 Special features Series: Tiger‑tec Gold Grade: WSP45G Applicable materials: P (Stahl), M (rostfreier Stahl), S (Titan and heat-resistant superalloys) Designed for versatile milling applications PVD coating technology for improved wear resistance FAQ Is this insert suitable for machining stainless steels? Yes. The SDMT06T212-F57 WSP45G insert from Walter Tools is specified for the M material group and is suitable for machining rostfreier Stahl with stable edge life and reduced risk of build-up. What advantages does the WSP45G grade offer? WSP45G is a Walter Tools grade within the Tiger‑tec Gold range; the PVD-coated carbide offers a balance of toughness and wear resistance for demanding milling tasks across Stahl, rostfreier Stahl and heat-resistant alloys. How does the square 90° geometry affect applications? The square 90° form provides four indexing edges per insert and, combined with a 1.2 mm corner radius, offers robust edge strength for shoulder milling while maintaining acceptable cutting forces for finishing passes. What is the role of the F57 chipbreaker? The F57 chipbreaker controls chip formation and evacuation for a variety of cutting conditions, promoting segmented chips and reducing the chance of workpiece marking or chip re-cutting in interrupted cuts. Which toolholders are compatible with this insert? The insert conforms to the SDMT-style designation and is compatible with standard holders designed for 06-sized square milling inserts using T2 thickness and M tolerance specifications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanation only; there is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer. The mention of Walter Tools refers to the brand as stated in the product data.
SDMT06T2ZDR-D57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance, precise square 90° form and reliable chip control for steady, productive milling of steel and cast iron; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. SDMT06T2ZDR-D57 WKP35G — Milling indexable insert, Tiger‑tec Gold coating, for steel and cast iron (Walter Tools) The SDMT06T2ZDR-D57 WKP35G is a square 90° milling indexable insert with a 15° relief angle, designed for reliable shoulder milling and versatile roughing operations in steel (P) and cast iron (K) Tiger‑tec Gold coated for wear resistance Suitable for steel (P) and cast iron (K) Square 90° geometry with 15° relief angle D57 chipformer for stable chip control Consistent performance through engineered coating and grade The combination of the Tiger‑tec Gold coating and the WKP35G grade provides consistent wear resistance and stable cutting performance in the machining of steel and cast iron. The coated carbide construction addresses the typical heat and abrasion encountered when machining group P and K materials, so the insert maintains cutting edge integrity for longer tool life. This stability translates into fewer tool changes and predictable process windows, which supports higher machine utilisation and reduced setup interruption. Geometry that simplifies process planning and improves reliability The square 90° form with a 15° relief angle offers a robust, low‑vibration profile for shoulder and contour milling. Square inserts deliver four usable cutting edges per index, improving cost efficiency when compared with single‑edge solutions. The defined D57 chipformer promotes controlled chip breaking and evacuation, reducing the risk of built‑up edge and workpiece surface defects. Together with the tolerance class M, the geometry supports repeatable mounting and dimensional consistency across tool holders and changeovers. Practical benefits for production and tool management Selecting this insert reduces process variation: the grade WKP35G is optimised for the thermal and mechanical demands of steel and cast iron, enabling reliable cutting at moderate to demanding conditions. The insert’s attributes support a balance between productivity and component quality — fewer rejects, steadier cycle times and simpler tool inventory management. When combined with appropriate cutter bodies and feeds, the insert helps to achieve stable chip forms and consistent surface finishes without over‑complicating machining parameters. Contact Metav Werkzeuge for personalised machining recommendations for Walter Tools Tiger‑tec Gold inserts or to request a supply and delivery proposal via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: SDMT06T2ZDR-D57-WKP35G-WALTER Designation: SDMT06T2ZDR-D57 WKP35G Product type: Fräswendeschneidplatte (milling indexable insert) Series: Tiger‑tec Gold Grade: WKP35G Manufacturer: Walter Tools Facts Relief / clearance angle: 15° Insert size: 06 Thickness: T2 Form: Square 90° Chipformer: D57 Tolerance class: M Special features Coating technology: Tiger‑tec Gold Material application: P (steel), K (cast iron) Indexable design with four cutting edges Coated carbide grade for thermal and abrasive resistance FAQ What materials is this insert suitable for? The SDMT06T2ZDR-D57 WKP35G insert from Walter Tools is designed primarily for steel (P) and cast iron (K) applications according to ISO groupings. How does the Tiger‑tec Gold series help in production? The Tiger‑tec Gold coating on the WKP35G grade improves wear resistance and thermal stability, which helps maintain cutting edge life and supports consistent cycle times in serial production. What advantages does the square 90° geometry provide? Square 90° inserts offer a strong cutting edge and four indexable edges, providing robustness for shoulder milling and a cost‑effective edge‑count for repeatable operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
SDMT06T2ZDR-D57 WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of a high‑performance Tiger‑tec Gold coating, a robust square 90° geometry and optimised chip control to maintain stable production and minimise tool changes; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. SDMT06T2ZDR-D57 WPP35G milling indexable insert (Square 90°, 15° relief) – Walter Tools The SDMT06T2ZDR-D57 WPP35G is a square 90° milling indexable insert designed for efficient steel machining, featuring a Tiger‑tec Gold coated carbide grade and a 15° relief for reliable chip formation. Tiger‑tec Gold coated carbide grade WPP35G Optimised for steel machining (ISO group P) Square 90° geometry with 15° relief Stable chip formation and extended tool life Consistent performance through advanced coating technology The Tiger‑tec Gold coating with the WPP35G grade combines wear resistance and toughness to meet the demands of steel machining. Coated carbide reduces flank and crater wear by providing a thermal barrier and enhanced hardness at the cutting edge; this results in longer edge life and more consistent component quality. For general turning and milling of steels (ISO group P), the coated surface helps to control the heat and reduce built‑up edge, which in turn supports predictable tool life and fewer interruptions in the production process. Geometry engineered for strength and precision A square 90° insert form provides a strong cutting edge and versatile cutting angles for face and shoulder milling operations. The 15° relief decreases friction behind the cutting edge and contributes to controlled chip flow when paired with the chipbreaker D57, improving surface finish and reducing cutting forces. The insert’s format and thickness classification (T2) are selected to balance rigidity with the ability to index fresh edges quickly, supporting both roughing and finishing passes while keeping machine load stable. Application range, economy and process reliability The insert is specified for machining steel and is formulated to handle a range of steel conditions from wear‑resistant to more ductile grades, offering a balance between edge stability and toughness. This combination supports higher productivity by extending indexable life and lowering the frequency of tool changes. The SDMT06T2ZDR‑D57 WPP35G from Walter Tools is particularly suited to standard production environments where predictable chip behaviour and repeatable part quality are required; its optimised chip control and robust edge geometry contribute directly to reduced downtime and better overall machining economy. Contact Metav Werkzeuge to specify the optimal Walter Tools SDMT06T2ZDR‑D57 WPP35G insert for the intended steel application and secure detailed cutting recommendations from a specialist at Metav Werkzeuge: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data SKU: SDMT06T2ZDR-D57-WPP35G-WALTER Designation: SDMT06T2ZDR-D57 WPP35G Product type: Milling indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP35G Facts Relief angle: 15° Geometry: Square 90° Plate size: 06 Plate thickness: T2 Chipbreaker: D57 Tolerance class: M Special features Coating technology: Tiger‑tec Gold Substrate: Coated carbide Application group: Steel (ISO P) Execution: T Optimised for stable chip formation and long tool life FAQ What materials is this insert suitable for? The SDMT06T2ZDR‑D57 WPP35G is specified primarily for steel (ISO group P); the WPP35G grade and Tiger‑tec Gold coating are tailored to the thermal and chip‑forming characteristics of steel machining. What does the square 90° geometry and 15° relief mean in practice? Square 90° geometry gives a robust cutting edge suitable for face and shoulder milling, while the 15° relief reduces contact behind the edge, aiding chip evacuation and lowering cutting forces when combined with the D57 chipbreaker. How many cutting edges are typically available per insert? A square 90° indexable insert commonly offers four usable cutting edges per index, enabling re‑indexing to fresh edges and economical edge utilisation. Can this insert be used for stainless steel applications? A specific suitability for stainless steel is not stated; the SDMT06T2ZDR‑D57 WPP35G is formulated and recommended for steel (ISO group P) rather than stainless applications. What are the key benefits for production environments? The combination of Tiger‑tec Gold coating, robust 90° geometry and D57 chip control delivers process reliability, extended tool life and more consistent surface finishes, which together reduce set‑up time and increase productive spindle time. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only; no commercial connection is implied between our company and the listed manufacturers. The offered article is original, factory‑new goods from the manufacturer. Walter Tools is a leading provider of precision tooling solutions and is part of the wider Sandvik group.
SDMT06T2ZDR-D57 WSP45G Wendeplatten - Walter Tools
Efficient, versatile and built for continuous production: the SDMT06T2ZDR‑D57 WSP45G combines the Tiger‑tec Gold PVD technology with a robust WSP45G grade to deliver long tool life, reliable chip control and consistent surface quality when machining steel, stainless steel and heat‑resistant alloys. Order directly via Metav Werkzeuge or consult the technical team for application support. SDMT06T2ZDR‑D57 WSP45G — Indexable milling insert (Tiger‑tec Gold) by Walter Tools, 15° clearance A SDMT06T2ZDR‑D57 WSP45G indexable milling insert engineered for productive milling of P, M and S material groups, offering a square 90° cutting geometry and a D57 chipbreaker for controlled chip formation. Tiger‑tec Gold PVD coating for extended life Universal WSP45G grade for P, M and S materials Square 90° geometry for stable cutting 15° clearance angle with T2 thickness High‑performance cutting across mixed materials The combination of Tiger‑tec Gold coating and the WSP45G grade provides a balanced solution for both roughing and finishing tasks. Designed for the thermal and mechanical demands of machining steel, stainless steel and heat‑resistant superalloys, this insert supports stable chip formation and resists edge chipping under variable cutting conditions. The coated carbide substrate improves wear resistance and helps maintain dimensional accuracy over long production runs, reducing unplanned tool changes and increasing net machining time. Precise geometry for reliable chip control and surface finish The square 90° insert form together with the chipbreaker D57 delivers predictable chip breaking and evacuation, which helps to avoid recutting and protects the cutting edge. A 15° clearance angle promotes a favourable contact angle at the tool tip, lowering cutting forces and improving surface integrity. The tolerance class M ensures consistent fitment and repeatable performance when installed in compatible cutter bodies, supporting high process security and reproducible results in series production. Engineered for productivity and lower unit costs By combining a coated carbide body with PVD technology, the insert is optimised to extend tool life while maintaining cutting performance. This results in fewer tool changes, lower tool consumption and improved throughput—advantages that are measurable in cycle time reductions and lower overall cost per component. The robust grade selection and coating mean the insert tolerates higher cutting parameters where material and machine conditions allow, enabling more productive machining without compromising component quality. Practical integration and workshop benefits The insert’s designation and dimensions (size 06, thickness T2) make it suitable for standard indexable milling systems that accept SDMT‑type plates; the straightforward specification simplifies inventory management and cutter assembly. The universal material compatibility reduces the need for multiple specialised grades, while the proven brand background supports reliable supply chains. For specific machining strategies, metallurgical combinations or recommended cutting data, the technical consultants at Metav Werkzeuge can provide tailored guidance. Contact Metav Werkzeuge for expert advice on Walter Tools Tiger‑tec Gold inserts and to discuss suitability, toolholder compatibility and delivery for the SDMT06T2ZDR‑D57 WSP45G Technical Data SKU: SDMT06T2ZDR‑D57‑WSP45G‑WALTER UID: SDMT06T2ZDR‑D57‑WSP45G‑WALTER Product: Indexable milling insert (SDMT06T2ZDR‑D57 WSP45G) Brand: Walter Tools Core Data Grade / Sort: WSP45G Series: Tiger‑tec Gold Material compatibility: P / M / S Free angle: 15° Insert form: Square 90° Insert size: 06 Thickness: T2 Chipbreaker: D57 Tolerance class: M Special features PVD coated carbide (Tiger‑tec Gold) Versatile for steel, stainless steel and superalloys Robust grade for combined roughing and finishing Execution: T FAQ Which materials can be machined with this insert? The SDMT06T2ZDR‑D57 WSP45G is suitable for machining steel (P), stainless steel (M) and heat‑resistant superalloys/titanium (S) thanks to the WSP45G grade and Tiger‑tec Gold coating. What are the benefits of the Tiger‑tec Gold coating on this insert? Tiger‑tec Gold on the SDMT06T2ZDR‑D57 WSP45G enhances wear resistance and thermal stability, extending tool life and maintaining edge integrity under demanding milling conditions. How does the chipbreaker D57 influence cutting performance? The D57 chipbreaker promotes reliable chip breaking and evacuation, reducing recutting and improving surface finish, which is particularly useful in mixed‑material production. What does tolerance class M indicate for this insert? Tolerance class M denotes standardised dimensional accuracy for consistent seating and repeatable performance when fitted into compatible toolholders. Which cutter geometry and applications suit this insert best? The square 90° form and 15° clearance angle make the insert suitable for operations that demand a robust engagement angle and stable cutting, such as general milling tasks that combine moderate roughing and finishing. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMT09T304-F57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance and reliable chip control to increase machining throughput while reducing tool change frequency; order the insert via Metav Werkzeuge or consult our technical team for application-specific advice. SDMT09T304-F57 WKP35G milling insert — Tiger‑tec Gold, square 90° (for steel & cast iron) — Walter Tools The SDMT09T304-F57 WKP35G is a square 90° milling insert engineered for efficient metal removal in steel and cast iron, combining a Tiger‑tec Gold coating with a defined 15° clearance for stable cutting performance. Tiger‑tec Gold coating for extended life Optimised for steel and cast iron machining Square 90° form with 0.4 mm corner radius Longer tool life through advanced coating and grade The combination of the Tiger‑tec Gold coating and the WKP35G coated‑carbide grade delivers increased resistance to abrasive and adhesive wear, improving interval lengths between indexings. This translates into a measurable productivity gain in continuous operations where downtime for tool change represents a real cost. The insert’s surface engineering reduces built‑up edge formation and helps maintain cutting geometry under elevated temperatures typical for machining steel and cast iron, supporting stable tool life and consistent part quality. Stable chip control and reliable process security With an integrated chipbreaker F57 and a square cutting form, the insert ensures predictable chip shape and evacuation during medium to heavy milling passes. Predictable chips reduce the risk of rework and machine downtime and simplify coolant and machine setup. The geometry, combined with the coated carbide specification, is optimised for the typical thermal and mechanical demands of P and K ISO material groups, providing reliable material removal rates and improved process security in production environments. Geometry tuned for surface quality and dimensional repeatability The square 90° shape and 0.4 mm corner radius produce a balance between robustness and edge definition: the radius supports strength at the cutting edge while allowing acceptable surface finish on the workpiece. The defined 15° clearance angle minimises rubbing on the flank face, lowering cutting forces and heat generation. Together, these features contribute to consistent component finish and dimensional stability across runs, especially when machining cast components and general steels where chip behaviour and edge integrity are critical. Practical integration and expert support for production use The insert is supplied in the Tiger‑tec Gold series format and is compatible with standard SDMT‑style milling toolholders, making it straightforward to integrate into existing tool inventories. For customers seeking optimisation, Metav Werkzeuge provides machining advice and application recommendations to align cutting data with part geometry and machine capability. Technical consultancy can help select cutting parameters that leverage the insert’s wear resistance and chip control to reduce overall machining cost per part. Contact Metav Werkzeuge for tailored application support and availability of Walter Tools Tiger‑tec Gold inserts Technical data Article number: SDMT09T304-F57-WKP35G-WALTER SKU: SDMT09T304-F57-WKP35G-WALTER Series: Tiger‑tec Gold Grade: WKP35G Facts Clearance angle: 15° Corner radius: 0.4 mm Plate form: Square 90° Plate size: 09 Thickness: T3 Chipbreaker: F57 Tolerance class: M Special features Coating: Tiger‑tec Gold Material base: coated carbide Suitable for: steel (P), cast iron (K) Application: general milling operations Design: indexable insert, square geometry FAQ What materials is this insert suitable for? The SDMT09T304-F57 WKP35G insert from Walter Tools is optimised for ISO material groups P (steel) and K (cast iron), offering balanced wear resistance and chip control for these materials. How does the Tiger‑tec Gold coating benefit production runs? The Tiger‑tec Gold coating on the WKP35G grade improves resistance to abrasive and adhesive wear, which lengthens tool life and supports longer uninterrupted production cycles with stable cutting behaviour. What does the 0.4 mm corner radius mean for surface finish? A 0.4 mm corner radius provides enhanced edge strength while still allowing a good surface finish on milled parts; it represents a compromise between robustness and the achievable finish level. Is the insert compatible with standard SDMT holders? Yes, the insert follows SDMT geometry and is compatible with standard SDMT‑style milling bodies designed for square 90° inserts and T3 thickness. The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Mention of brand names is for explanatory purposes only and does not imply any affiliation. Manufacturer: Walter Tools; Headquarters: Tübingen, Germany
SDMT09T304-F57 WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKP35S grade for consistent productivity in steel and cast iron machining, combined with a robust square 90° geometry and a 0.4 mm corner radius for reliable profile control. Order the insert via Metav Werkzeuge or consult our specialists for application support. SDMT09T304-F57 WKP35S milling indexable insert — Tiger·tec Silver, square 90° (Walter Tools) The SDMT09T304-F57 WKP35S is a square 90° milling indexable insert engineered for productive machining of steel and cast iron in general milling applications. Tiger·tec Silver coated carbide Suitable for steel and cast iron Square 90° shape for robust cutting 0.4 mm corner radius for precise profiles Increased process reliability for high-volume milling The combination of the Tiger·tec Silver coating and the WKP35S grade results in consistently stable cutting performance under challenging conditions. Coated carbide substrates are designed to resist abrasive wear and maintain edge stability, which reduces tool change frequency and supports uninterrupted production cycles. This leads to measurable improvements in machine utilisation and predictable batch runtimes, particularly when machining unalloyed or alloyed steel and abrasive cast iron. Clear machining advantages and application focus The square 90° geometry paired with a 0.4 mm corner radius and a dedicated F57 chipbreaker offers strong versatility across roughing and light finishing passes. The geometry provides robust cutting edges for shoulder milling and profile work, while the chipbreaker promotes reliable chip formation and evacuation. For operations where repeatable surface integrity and dimensional control matter, this insert yields a balance of stable tool life and acceptable surface quality without the need for excessive cutting parameter compromises. Coating, grade and handling explained for practical setups The WKP35S designation identifies a coated carbide grade optimised for the thermal and mechanical demands of P and K workpieces. In practice, this means effective performance on common steel grades and a good resistance to the abrasive tendencies of cast iron. The insert’s 15° clearance angle helps to reduce rubbing on the flank face, improving finish and reducing heat transfer into the cutting edge. Specifying the correct seat and clamping torque for the toolholder, and matching the insert geometry to the operation, will preserve the coating benefits and ensure consistent results. For application advice or to request availability of the Walter Tools Tiger·tec Silver insert, contact Metav Werkzeuge for tailored recommendations and fast delivery: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: SDMT09T304-F57-WKP35S-WALTER Designation: SDMT09T304-F57 WKP35S Product type: Milling indexable insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP35S Facts Tolerance class: M Plate size: 09 Plate thickness: T3 Corner radius: 0.4 mm Clearance angle: 15° Chipbreaker: F57 Special features Square 90° insert form Coating: Tiger·tec Silver (coated carbide) Suitable for: Steel (P) and Cast iron (K) Execution: T Series and grade description: WKP35S — coated carbide grade optimised for P and K groups FAQ What materials is this insert suitable for? The SDMT09T304-F57 WKP35S insert is specified for steel (P) and cast iron (K) applications and performs well on unalloyed and alloyed steels as well as cast components. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the WKP35S grade improves wear resistance and edge stability, extending tool life and helping to maintain dimensional consistency during longer runs. What is the significance of the 0.4 mm corner radius? A 0.4 mm corner radius gives a compromise between strength and finish capability: it supports robust cutting for shoulders and profiles while still allowing acceptable surface quality on finishing passes. Which chipbreaker is used and why does it matter? The insert uses an F57 chipbreaker, designed to produce controlled, short chips in common steel and cast iron operations, improving evacuation and reducing recutting risks. Is this insert compatible with my toolholder? Compatibility depends on the toolholder’s seat for an SDMT-style insert; use the SDMT09T304-F57 designation to verify correct seat geometry and clamping requirements with the toolholder specification. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are mentioned for clarification only. There is no affiliation between our company and the brands referenced. The offered item is original and brand-new from the manufacturer.
SDMT09T304-F57 WSP45G WSP45G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the F57 chipbreaker delivers a reliable balance of wear resistance and predictable chip control for high-productivity milling; the square 90° form and 15° relief angle contribute to stable edge life and process security. Order the SDMT09T304-F57 WSP45G directly via Metav Werkzeuge or consult the technical team for application guidance. SDMT09T304-F57 WSP45G – square 90° milling insert with Tiger·tec Gold coating (Walter Tools) The SDMT09T304-F57 WSP45G is a square 90° indexable milling insert designed for versatile face and slot milling of steel, stainless steel and heat‑resistant alloys. Tiger·tec Gold coating for high wear resistance Square 90° geometry for stable milling 15° relief angle improves edge strength Chipbreaker F57 for controlled chips and surface quality Higher throughput with consistent tool life The Tiger·tec Gold PVD coating combined with a coated carbide substrate provides enhanced wear resistance and thermal stability, which supports longer intervals between indexings. This results in fewer tool changes and a more continuous machining process, improving overall shop-floor throughput. The F57 chipbreaker promotes repeatable chip formation on common milling operations, reducing the risk of built-up edge and enabling steadier surface finish over serial production. Broad material capability for fewer tool variants The insert is specified for material groups P / M / S, meaning capability across unalloyed and alloyed steels, stainless steel and heat‑resistant superalloys or titanium. Such versatility reduces the need for multiple specialised grades in the tooling cabinet and simplifies job planning. The coated cemented carbide grade is optimised for the combination of toughness and hardness required when machining materials that generate high temperatures or abrasive wear. Geometry engineered for stability and programming ease A square 90° plate form and 0.4 mm corner radius deliver a balance of strength and profile control, while the 15° relief angle helps to maintain a robust cutting edge under intermittent or shoulder milling conditions. The standardised size code 09 and thickness T3 make the insert compatible with many common indexable milling cutter bodies, reducing setup complexity and making CAM programming predictable when defining engagement angles and stepovers. Clear benefits for production planning and cost control With a tolerance class M and a repeatable chipforming geometry, the insert supports reproducible results across batches, which aids process stabilisation and quality assurance. The combination of coating technology and chipbreaker design aims to lower total machining cost per component through extended edge life and consistent surface integrity—especially important in medium to high‑volume runs where tool-related variability impacts part rejects and rework rates. For application advice, cutting-data recommendations or to place an order for this Walter Tools SDMT09T304-F57 WSP45G milling insert, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — Metav Werkzeuge’s specialists can advise on grades, holders and optimal cutting parameters for the intended material and operation. Technical Data Article number: SDMT09T304-F57-WSP45G-WALTER Label: Fräswendeschneidplatte SDMT09T304-F57 WSP45G Walter Tools Product type: Fräswendeschneidplatte / milling insert Brand: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Designation: SDMT09T304-F57 WSP45G Execution: T Numbers / Core technical data Relief angle: 15° Corner radius: 0.4 mm Plate form: Square 90° Size code: 09 Thickness: T3 Tolerance class: M Designs / Special features Coating: Tiger·tec Gold (PVD) Chipbreaker: F57 Material groups: P / M / S (steel, stainless steel, superalloys/titanium) Sortenbeschreibung: coated cemented carbide for versatile milling Series description: zähe, vielseitige PVD‑sorten für Fräsanwendungen FAQ What materials are suitable for this insert? The SDMT09T304-F57 WSP45G is specified for P / M / S material groups, which covers steels, stainless steel and heat‑resistant superalloys or titanium. How does the F57 chipbreaker affect machining? The F57 chipbreaker on the SDMT09T304-F57 WSP45G promotes predictable chip formation and helps maintain surface quality, reducing the likelihood of built‑up edge during continuous milling. What benefits does the Tiger·tec Gold coating provide? Tiger·tec Gold coating increases thermal and abrasive resistance for the SDMT09T304-F57 WSP45G, extending edge life in demanding milling operations and supporting higher cutting speeds where appropriate. Is the insert compatible with standard cutter bodies? The insert uses a common 09 size code and T3 thickness, making it compatible with many standard indexable milling cutter bodies designed for square 90° plates. What is the effect of the 0.4 mm corner radius? A 0.4 mm corner radius on the SDMT09T304-F57 WSP45G balances edge strength and profile precision, providing improved robustness at shoulders while preserving acceptable corner definition. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMT09T308-D51 WKP25S Wendeplatten - Walter Tools
The combination of the Tiger‑tec Silver coating and the WKP25S grade delivers reliable wear resistance and stable chip formation for productive milling of steel and cast iron; this insert supports consistent cycle times and fewer tool changes. Order the insert directly via Metav Werkzeuge or consult their technical team for application-specific selection. SDMT09T308-D51 WKP25S indexable milling insert — Tiger‑tec Silver, for steel and cast iron (Walter Tools) A high-performance SDMT09T308-D51 WKP25S indexable milling insert engineered for productive machining across ISO P and K materials, combining a robust coated grade with a chipbreaker designed for stable cutting. Tiger‑tec Silver coated grade WKP25S Square 90° geometry, 0.8 mm corner radius Chipbreaker D51 for stable chip control Suitable for Steel (P) and Cast Iron (K) Durable grade for sustained productivity The WKP25S grade, part of the Tiger‑tec Silver series, is a coated cemented carbide development tailored to the thermal and abrasive demands of turning and milling steels and cast irons. Its coating improves wear resistance and heat tolerance, which results in longer indexable-insert life and predictable performance under industrial cycle loads. The integrated chipbreaker D51 supports consistent chip formation, reducing the risk of built-up edge and unplanned stoppages. Geometry tuned for reliable surface quality A square 90° plate form with a 0.8 mm corner radius provides a balance between edge strength and surface finish. The fairly large corner radius improves edge robustness for interrupted cuts and contributes to a stable contact area between tool and workpiece, while still enabling acceptable surface roughness on typical structural steels and grey cast iron. Tolerance class M and plate thickness T3 give consistent seating in the tool holder, aiding repeatable part quality. Predictable process economy and tool life The coated grade and the insert geometry combine to lower the cost per component through extended tool life and reduced regrinds. Stable chip control from the D51 chipbreaker helps maintain coolant flow and evacuation, which in turn reduces rework and cycle variability. For production environments where machining time and repeatability matter, the insert supports fewer tool interventions and steadier throughput without compromising safety margins. Simple identification and system compatibility Designation elements—plate size 09, chipbreaker D51, and the WKP25S grade—make tool management straightforward in a tool crib. The SDMT form fits common Walter toolholders for milling applications, enabling rapid replacement and minimal setup. The clear ISO-aligned material groupings (P for steel, K for cast iron) facilitate correct tool selection for a wide range of workshop jobs and production scenarios. Practical advantages in everyday use Operators benefit from the insert’s robustness in mixed-material batches and from the consistent edge behaviour across shifts. The combination of grade and geometry reduces the need for extensive trial-and-error, supporting a smoother ramp-up in series production. If further machining parameters are required for process tuning, technical documentation and cutting data from the manufacturer or Metav Werkzeuge can provide guidance tailored to specific operations. Contact Metav Werkzeuge for application advice and rapid supply of the Walter Tools SDMT09T308-D51 WKP25S insert; technical enquiries welcome at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: SDMT09T308-D51-WKP25S-WALTER ISO designation: SDMT09T308-D51 WKP25S Series: Tiger‑tec Silver Grade: WKP25S Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Free angle: 15° Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Coating technology: Tiger‑tec Silver Substrate: coated cemented carbide Chipbreaker: D51 Plate form: square 90° Material groups: Steel (P), Cast iron (K) Typical applications: productive milling of steels and cast irons FAQ Which materials are suitable for this insert? The SDMT09T308-D51 WKP25S insert and its WKP25S grade are designed primarily for Steel (P) and Cast Iron (K) according to ISO groupings, providing balanced performance on unalloyed, alloyed steels and common cast-iron grades. What does the chipbreaker D51 deliver in practice? Chipbreaker D51 ensures controlled chip formation and evacuation under typical milling feeds, which supports consistent surface quality and reduces the likelihood of chip-related interruptions during continuous production. How does the 0.8 mm corner radius affect cutting? A 0.8 mm corner radius improves edge strength for interrupted or heavy cuts while still allowing acceptable surface finish; it reduces edge chipping risk compared with finer radii and extends usable tool life in demanding applications. Is the insert compatible with standard Walter milling cutters? The SDMT09T308-D51 form is a standard indexable insert geometry intended for use in compatible Walter toolholders; correct seating and clamp torque ensure repeatable performance and dimensional stability. What does the Tiger‑tec Silver coating mean for tool life? The Tiger‑tec Silver coating enhances wear resistance and thermal stability of the coated cemented carbide substrate, promoting longer tool life and more consistent cutting forces across production batches. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names are used for explanatory purposes only. There is no affiliation between our company and the named manufacturers. The offered item is an original, factory-new product from the manufacturer Walter Tools.
SDMT09T308-D51 WKP35G Wendeplatten - Walter Tools
Combining the WKP35G carbide grade with the Tiger‑tec Gold coating delivers productive machining of steel and cast iron, while the D51 chipbreaker and 15° free angle provide stable chip control and predictable tool life; order the SDMT09T308-D51 directly via Metav Werkzeuge or consult their specialists for application advice. SDMT09T308-D51 WKP35G — Milling indexable insert by Walter Tools (Tiger‑tec Gold, for steel and cast iron) The SDMT09T308-D51 WKP35G is a square 90° milling insert engineered for high‑productivity face and shoulder milling in steel and cast iron, combining a robust geometry with a high‑performance coating. Tiger‑tec Gold coating for long tool life WKP35G grade optimised for steel and cast iron Chipbreaker D51 for reliable chip control 15° free angle and 0.8 mm corner radius Consistent productivity through proven coating and grade The combination of Tiger‑tec Gold coating and the WKP35G grade is designed for repeatable performance in demanding milling operations. The coating system improves wear resistance and reduces adhesion on the cutting edge, which leads to longer tool life and fewer insert changes per shift. The coated carbide substrate balances toughness and hardness, so the insert maintains a stable cutting edge under intermittent and continuous cuts alike. This results in measurable gains in uptime and predictable maintenance intervals for production lines machining steel and cast iron. Reliable chip control for safer, cleaner machining The D51 chipbreaker geometry and the 15° free angle provide effective chip formation and evacuation, reducing the risk of built‑up edge and chatter in medium to heavy milling passes. The 0.8 mm corner radius supports a robust cutting edge that lowers edge chipping under interrupted cuts, while the square 90° form allows four usable cutting corners per insert for cost efficiency. These features together improve surface finish consistency and reduce rework, enabling stable process parameters and easier downstream handling. Easy integration and application focus for production This insert is supplied in plate size 09 with a T3 thickness; the tolerance class M supports reliable seat fit and repeatable mounting. The grade is suitable for ISO groups P and K, i.e. steel and cast iron, making it a versatile choice for mixed production shops and jobbing environments. Specifying the correct chipbreaker and grade simplifies cutting‑data selection and shortens process qualification time. For shops seeking to raise throughput without sacrificing stability, the geometry and coating of this insert offer a pragmatic balance between productivity and tool life. Specifying the Walter Tools SDMT09T308-D51 WKP35G is recommended for demanding steel and cast‑iron machining; contact Metav Werkzeuge for application support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: SDMT09T308-D51-WKP35G-WALTER Designation: SDMT09T308-D51 WKP35G Product type: Milling indexable insert Series: Tiger‑tec Gold Grade: WKP35G Manufacturer: Walter Tools Core dimensions Free angle: 15° Corner radius: 0.8 mm Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: M Chipbreaker: D51 Special features Coating: Tiger‑tec Gold (coated carbide) Material suitability: Steel (P), Cast iron (K) Execution: T Series description: WKP35G coated carbide grade Application focus: Productive machining with stable chip formation FAQ What materials is this insert best suited for? The SDMT09T308-D51 WKP35G is formulated for ISO groups P and K, making it suitable for machining steel and cast iron with dependable wear resistance. How does the Tiger‑tec Gold coating benefit production? Tiger‑tec Gold improves surface hardness and reduces adhesion at the cutting edge, so the insert gives longer tool life and more consistent results in the SDMT09T308-D51 configuration. What advantage does the D51 chipbreaker provide? The D51 chipbreaker directs chips away from the cutting zone and promotes short, controlled chip shapes, which lowers the risk of built‑up edge and improves process stability. Is the insert compatible with standard square 90° milling holders? Yes, the square 90° plate form and T3 thickness are compatible with holders designed for SDMT‑style inserts and support predictable seating within tolerance class M. How many cutting edges are available per insert? The square geometry provides four usable cutting corners; combined with the 0.8 mm corner radius and robust grade, this yields a cost‑effective edge count for many milling tasks. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only and do not imply any affiliation between our company and Walter Tools. The offered article is original, brand‑new merchandise supplied by the manufacturer.
SDMT09T308-D51 WPP35G WPP35G Wendeplatten - Walter Tools
High wear resistance from the Tiger·tec Gold coating combined with a 15° clearance angle and a 0.8 mm corner radius delivers predictable tool life and consistent surface quality when machining steel. The WPP35G grade provides a balance of wear resistance and toughness for stable chip formation. Order the insert directly via Metav Werkzeuge or ask the consultants for application guidance. SDMT09T308-D51 WPP35G milling indexable insert — Tiger·tec Gold coated, 15° clearance (Walter Tools) SDMT09T308-D51 WPP35G is a square milling insert designed for productive steel machining, offering wear-resistant Tiger·tec Gold coating and a D51 chipbreaker for controlled chip formation. Tiger·tec Gold coated for steel 15° clearance angle for stable cutting 0.8 mm corner radius for versatile finishing Square 90° geometry for axial stability Durable coating and cutting grade for consistent productivity The combination of the Tiger·tec Gold coating and the WPP35G grade gives this indexable insert high wear resistance while maintaining sufficient toughness for a wide range of steel applications. The coating reduces flank and crater wear, which extends edge life and reduces downtime for tool changes. The D51 chipbreaker is tuned for typical steel chip shapes, improving evacuation and reducing the risk of built-up edge. For production environments this translates into fewer interruptions, steadier cycle times and more predictable tool costs. Geometry that supports quality surfaces and repeatable results A square 90° insert form with a 0.8 mm corner radius offers a reliable compromise between strength and finishing capability: the larger radius supports robust edge strength for roughing work, while still enabling acceptable surface finishes in semi-finishing operations. The 15° clearance angle ensures a stable cutting contact and helps to avoid rubbing at the flank, promoting consistent cutting forces. The specified tolerance class M contributes to repeatable seating and interchangeability in toolholders, which is essential for batch production or tool-change automation. Economic benefits through process stability and broad steel coverage Engineered for the machining of steels (ISO group P), this indexable insert provides long wear life and broad applicability across unalloyed and alloyed steels thanks to the WPP35G mix of wear resistance and toughness. Stable chip control and reduced edge failures lower scrap rates and increase first-pass yields, improving overall cost-efficiency. The insert’s design supports predictable tool life, easing planning for regrinds or replacements and enhancing process reliability in both job-shop and continuous production settings. For ordering or tailored application advice on Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for fast, experienced support and supply coordination Technical data Article number: SDMT09T308-D51-WPP35G-WALTER Designation: SDMT09T308-D51 WPP35G Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Facts Size designation: 09 Thickness: T3 Clearance angle: 15° Corner radius: 0.8 mm Plate form: Quadrat 90° Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP35G (coated carbide) Chipbreaker: D51 Material application: Steel (P) Execution: T FAQ What materials is this insert designed to machine? SDMT09T308-D51 WPP35G is specified for the machining of steels (ISO group P) and the WPP35G grade is optimised for the heat and chip characteristics typical when cutting steel. Which chipbreaker is fitted and what is its effect? The insert features the D51 chipbreaker; this geometry promotes controlled chip formation and evacuation, improving process stability when SDMT09T308-D51 WPP35G is used in continuous or interrupted milling. How does the corner radius influence application choices? The 0.8 mm corner radius provides a compromise between edge strength and surface quality, allowing the insert to be used for both robust roughing cuts and semi-finishing operations with predictable results. What seating and interchangeability can be expected from this insert? With tolerance class M, the insert ensures consistent seating accuracy and repeatable positioning in standard toolholders, supporting automated tool changes and batch-production repeatability for SDMT09T308-D51 WPP35G. Is the Tiger·tec Gold coating beneficial for high-speed applications? The Tiger·tec Gold coating on the WPP35G grade improves wear resistance and thermal stability, making the insert suitable for higher cutting speeds in many steel machining scenarios, while preserving edge life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SDMT09T308-D51 WSP45G Wendeplatten - Walter Tools
Benefit from the combination of productive chip control, a Tiger·tec Gold PVD-coated grade and a robust square geometry for consistent milling performance. Order the SDMT09T308-D51 WSP45G milling insert through Metav Werkzeuge or consult the team for application advice. SDMT09T308-D51 WSP45G milling insert — Tiger·tec Gold, versatile PVD grade — Walter Tools The SDMT09T308-D51 WSP45G is a square 90° milling insert with a 0.8 mm nose radius and a 15° relief angle, designed for versatile milling in steel, stainless steel and heat-resistant alloys. Tiger·tec Gold PVD coating Suitable for steel, stainless and superalloys 15° clearance for versatile milling Square 90° form with 0.8 mm corner radius Deliver consistently higher productivity with Tiger·tec Gold The insert employs the WSP45G PVD-coated carbide grade from the Tiger·tec Gold series, optimised for stable edge life and predictable chip formation. This translates into fewer tool changes and higher machine uptime — a direct gain in productivity for batch and continuous milling. The coating and substrate combination promotes heat resistance and reduces flank wear, making the component suitable for both moderate and demanding milling tasks without compromising process reliability. One insert for multiple materials reduces process complexity Marked for ISO material groups P / M / S, the grade is suitable for machining unalloyed and alloyed steel, stainless steel, and heat-resistant superalloys or titanium. This broad compatibility reduces tool inventory and simplifies tool selection when production mixes different material families. The designated material letters reflect the insert’s capability to manage typical heat generation and chip behaviour of each group, ensuring secure chip flow and consistent surface quality across applications. Geometry and tolerance for stable machining and surface finish The square 90° shape combined with a 0.8 mm nose radius offers a balance between strength and edge definition, supporting both semi-finishing and profile milling with good surface integrity. A 15° relief angle provides clearance for varied cutting strategies, while the chipbreaker D51 aids controlled chip segmentation in interrupted and continuous cuts. The tolerance class M and thickness T3 ensure repeatable seating and secure clamping, which reduces vibration and improves dimensional consistency during production runs. Integration into machining processes and practical benefits The insert suits applications where steady edge life and process security are priorities, such as general face milling, shoulder milling and mixed-operation batches. The combination of coating and chip control supports a conservative to medium cutting data window, allowing operators to favour tool life or throughput as required. For shops aiming to reduce setups and increase overall equipment effectiveness, this insert offers a pragmatic route to fewer interruptions and more consistent part quality. Contact Metav Werkzeuge for tailored recommendations on integrating Walter Tools Tiger·tec Gold inserts into production — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: SDMT09T308-D51-WSP45G-WALTER Designation: SDMT09T308-D51 WSP45G Brand: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Form: Square 90° Corner radius: 0.8 mm Relief angle: 15° Thickness: T3 Chipbreaker: D51 Tolerance class: M Numbers / Core technical data Plate size: 09 Corner radius: 0.8 mm Relief angle: 15° Thickness code: T3 Tolerance: M Special features / Materials PVD-coated carbide (WSP45G) Material suitability: Steel (P), Stainless steel (M), Superalloys/Titanium (S) Chipbreaker: D51 Square 90° plate shape Series: Tiger·tec Gold FAQ What materials can this insert machine effectively? The SDMT09T308-D51 WSP45G insert is specified for ISO groups P, M and S, which covers a wide range including steel, stainless steel and heat-resistant superalloys or titanium, making it suitable for mixed-production environments. What does the WSP45G grade offer compared with standard grades? WSP45G is a PVD-coated Walter Tools grade in the Tiger·tec Gold family, offering enhanced heat resistance and improved chip control for milling operations, which supports longer tool life and stable cutting results. How does the chipbreaker D51 affect machining? The D51 chipbreaker is designed to promote controlled chip segmentation and evacuation during both continuous and interrupted cuts, reducing the risk of built-up edge and supporting consistent surface finishes. Why choose a square 90° insert with a 0.8 mm radius? A square 90° insert with a 0.8 mm nose radius provides robust cutting edges for shoulder and face milling while maintaining sufficient detail for semi-finish work, delivering a compromise between corner strength and surface quality. What does tolerance class M mean for tool setting? Tolerance class M indicates standard repeatability for seating and clamping; it supports reliable positional accuracy when inserts are indexed or replaced, helping to maintain process stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany — Protected trademarks and trade names remain the property of their respective owners. The mention of brand names serves explanatory purposes only and does not imply any affiliation with the vendor. The offered item is an original, factory-new product of the manufacturer.
SDMT09T308-D57 WKK25G WKK25G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Gold coating, optimised chip control for cast iron and a robust 0.8 mm corner radius that extends edge life and process stability. Order the insert directly via Metav Werkzeuge or consult the Metav team for application-specific recommendations. SDMT09T308-D57 WKK25G – indexable milling insert, Tiger‑tec Gold, for cast iron | Walter Tools The SDMT09T308-D57 WKK25G is an indexable milling insert engineered for high‑performance machining of cast iron, combining the Tiger‑tec Gold coating with a D57 chipbreaker for controlled chips and consistent surface quality. Tiger‑tec Gold coating for long tool life Optimised D57 chipbreaker for cast iron Square 90° geometry for robust milling Corner radius 0.8 mm for stable edge strength Longer tool life through advanced coating and grade The Tiger‑tec Gold technology and the WKK25G grade mean this insert is a coated carbide solution optimised for abrasive cast iron conditions. The combination of a wear‑resistant coating and a substrate tuned for brittle, short‑breaking chips reduces flank wear and makes machining runs more predictable. For production environments where repeatability matters, the insert’s composition delivers reduced regrinds and fewer tool changes, which translates into lower per‑component cost and fewer interruptions to the machining cycle. Precision geometry that improves productivity The square 90° form with a 0.8 mm corner radius and a 15° free angle gives a balance between edge strength and cutting impact resistance. The D57 chipbreaker promotes consistent chip shape in cast iron, helping to avoid chip entanglement and to maintain stable cutting forces. Together, these features reduce vibrations and allow for higher feed rates in many operations; shorter cycle times are achieved without sacrificing surface integrity. Tolerance class M and thickness T3 ensure reliable seating and repeatable positioning in standard toolholders. Stable process behaviour and application support for series production Designed for productive milling in cast iron, this insert supports both roughing and more controlled finishing passes where chip control and edge stability are required. The Tiger‑tec Gold-treated surface lowers the friction at the cutting zone, which often improves surface finish and extends tool life under interrupted cuts. Backed by Walter Tools’ manufacturing standards, the component contributes to consistent output and predictable maintenance intervals, supporting lean production and predictable cost planning. Contact Metav Werkzeuge for tailored application advice on using the Walter Tools SDMT09T308-D57 WKK25G insert in cast iron processes — email info@metav-werkzeuge.com or call +49 2822 7131930 for a technical consultation Technical data SKU: SDMT09T308-D57-WKK25G-WALTER Name: Fräswendeschneidplatte SDMT09T308-D57 WKK25G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WKK25G Facts Free angle: 15° Corner radius: 0.8 mm Insert shape: Square 90° Insert size: 09 Thickness: T3 Tolerance class: M Chipbreaker: D57 Special features Coating: Tiger‑tec Gold (coated carbide) Application: Cast iron Execution: T ISO designation: SDMT09T308-D57 WKK25G Material code: K (cast iron suitability) FAQ Which materials is this insert designed for? The SDMT09T308-D57 WKK25G is formulated for machining cast iron; the WKK25G grade and Tiger‑tec Gold coating are optimised for the abrasive, short‑chip behaviour typical of cast materials. What advantages does the Tiger‑tec Gold coating provide? Tiger‑tec Gold on the SDMT09T308-D57 WKK25G reduces friction and increases wear resistance, resulting in extended tool life and more consistent part quality during longer production runs. How do the geometry and chipbreaker affect machining? The square 90° geometry combined with the D57 chipbreaker produces controlled chips and stabilises cutting forces, while the 0.8 mm corner radius improves edge robustness for interrupted cuts. Is this insert suitable for finishing as well as roughing? Yes. The WKK25G grade offers a balance between wear resistance and toughness, allowing the SDMT09T308-D57 WKK25G to perform in both productive roughing and controlled finishing operations on cast iron. What should be considered when integrating this insert into a tool system? Ensure correct seating for tolerance class M and match holder geometry to the square 90° form; the insert’s T3 thickness and ISO designation SDMT09T308-D57 WKK25G define the compatible toolholders. Walter Tools (Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen) Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only and do not indicate any affiliation with our company. The offered item is an original, brand‑new product from the manufacturer.
SDMT09T308-D57 WKP25S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating and the WKP25S carbide grade for stable chip formation and productive milling of steel and cast iron; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. SDMT09T308-D57 WKP25S indexable milling insert — Tiger·tec Silver, 15° clearance, Walter Tools The SDMT09T308-D57 WKP25S is an indexable milling insert designed for general-purpose and finishing operations in steel and cast iron, offering a balanced geometry and a dedicated chipbreaking system for predictable machining results Tiger·tec Silver coating technology WKP25S coated carbide grade 15° clearance angle for general milling Suitable for steel and cast iron applications High-performance grade for mixed-material milling The combination of Tiger·tec Silver coating and the WKP25S coated carbide delivers a reliable balance between wear resistance and edge strength, tailored for the thermal and abrasive conditions encountered when machining steel and cast iron. The 15° clearance contributes to stable tool engagement and reduced rubbing, while the 0.8 mm corner radius supports a good surface finish without excessive cutting forces. This insert is intended where consistent tool life and predictable regrind intervals are priorities, enabling a smoother manufacturing flow and fewer unscheduled tool changes. Predictable chip control and edge stability for uninterrupted production Equipped with the D57 chipbreaker, the insert promotes short, manageable chips that clear reliably from the cutting zone, reducing the risk of recutting and improving process stability. The chipbreaker geometry is optimised for both continuous and interrupted cuts, resulting in stable chip formation and productive machining across a range of feeds and depths. For applications where repeatable part quality and uptime are essential, the chip control design helps maintain dimensional consistency and reduces secondary operations. Geometry and tolerance for repeatable results on the shop floor The square 90° form and defined features such as tolerance class M, plate T3 thickness and size 09 ensure straightforward indexing and predictable seating in standard toolholders. The square shape allows multiple cutting edges per insert, improving economy per edge, while the defined tolerance supports consistent clamping and minimal runout. These geometrical and tolerance choices contribute directly to repeatable performance and a reliable surface finish in series production. Easy integration and brand-backed reliability As an indexable insert from Walter Tools, the design emphasises practical integration into existing milling systems, offering compatibility with common clamping concepts and replacement schedules. The coated carbide construction and chipbreaker choice make the component suitable for both catalogue-referenced and geometry-dependent applications in mixed-material environments. For procurement and process planning, the insert represents a technically clear, economical option to raise the stability of daily machining tasks. Contact Metav Werkzeuge to discuss Walter Tools Tiger·tec Silver inserts and receive application-oriented advice for optimised milling performance Technical data Article number: SDMT09T308-D57-WKP25S-WALTER Designation: SDMT09T308-D57 WKP25S Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Clearance angle: 15° Corner radius: 0.8 mm Plate size: 09 Thickness: T3 Tolerance class: M Special features Coated carbide (Tiger·tec Silver) Grade: WKP25S Chipbreaker: D57 Plate form: square 90° Material suitability: P (steel) / K (cast iron) Execution: T FAQ Which materials are suitable for this insert? The SDMT09T308-D57 WKP25S from Walter Tools is designed for machining steel and cast iron, reflecting the P/K suitability of the WKP25S grade. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver treatment on the WKP25S grade improves wear resistance and edge stability for the SDMT09T308-D57 WKP25S, supporting longer tool life and more consistent cutting performance. How does the D57 chipbreaker affect machining? The D57 chipbreaker on the SDMT09T308-D57 WKP25S produces short, controllable chips that aid evacuation and reduce recutting, which benefits surface quality and process reliability. What does tolerance class M mean for toolholding? Tolerance class M for this indexable insert indicates machining and seating accuracy that supports consistent clamping and reduced runout when used in appropriately matching toolholders. Is the square 90° shape beneficial for economy? Yes; the square 90° format of the SDMT09T308-D57 WKP25S offers multiple usable edges per insert, improving cost-efficiency per edge while maintaining stable cutting geometry. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not imply any connection between our company and the named manufacturers. The offered item is an original, factory-new product of the manufacturer.
SDMT09T308-D57 WKP35G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold wear resistance and the WKP35G grade ensures consistent tool life and stable chip formation when machining steel and cast iron; order the SDMT09T308‑D57 WKP35G insert directly via Metav Werkzeuge or consult the technical team for process integration. SDMT09T308‑D57 WKP35G indexable milling insert by Walter Tools — Tiger‑tec Gold for steel and cast iron SDMT09T308‑D57 WKP35G is a square 90° indexable milling insert from the Tiger‑tec Gold series, designed for high‑productivity face and shoulder milling of steels and cast‑iron materials. Tiger‑tec Gold coating for wear resistance Grade WKP35G optimised for steel and cast iron Square 90° form with 0.8 mm corner radius D57 chipbreaker for stable chip control Longer tool life through advanced grade technology The Tiger‑tec Gold series, embodied in the WKP35G grade, combines a wear‑resistant coating with a robust substrate to reduce flank and crater wear under typical steel and cast iron cutting conditions. This insert offers improved process consistency: the coating slows abrasive wear while the substrate maintains edge stability, resulting in fewer tool changes and a higher effective cutting time per tool. The result is measurable productivity gain with predictable performance in serial production. Geometry that stabilises the cut and improves surface quality A square 90° insert geometry with a 0.8 mm corner radius and 15° relief provides a stable cutting edge that dampens vibration and supports predictable chip flow. The D57 chipbreaker is designed for controlled chip formation in both short and medium‑chip scenarios, helping to avoid entanglement and reduce rework. For the workshop, this geometry translates into better surface finish and more reproducible part quality when face milling or finishing shoulders. Practical advantages for process planners and operators Tolerance class M ensures dimensional consistency across batches, simplifying tool‑holder setup and repeatability in automated cells. The insert thickness T3 and proven chip control enable reliable performance with standard Walter Tools tool holders. Compatibility with material groups P (steel) and K (cast iron) makes this grade a versatile choice for mixed‑material production. The combination of a coated carbide grade and the specified geometry provides a cost‑effective solution where stable cycle times and low scrap rates are priorities. For high‑productivity milling with Walter Tools' Tiger‑tec Gold grade, contact Metav Werkzeuge for tailored recommendations and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: SDMT09T308‑D57‑WKP35G‑WALTER Product type: Indexable milling insert (milling insert) Designation: SDMT09T308‑D57 WKP35G Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Free angle: 15° Corner radius: 0.8 mm Plate form: Square 90° Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Grade: WKP35G (coated carbide) Chipbreaker: D57 Suitable for materials: steel (P) and cast iron (K) Coating technology: Tiger‑tec Gold FAQ What materials is this insert suited for? The SDMT09T308‑D57 WKP35G insert is engineered for ISO groups P (steel) and K (cast iron), with the WKP35G grade optimised to manage the heat and abrasive wear typical of these materials. How does the D57 chipbreaker affect machining? The D57 chipbreaker promotes reproducible chip segmentation and evacuation, reducing the risk of surface damage and enabling more stable cycle times when using the SDMT09T308‑D57 WKP35G in milling operations. What benefit does the 0.8 mm corner radius provide? A 0.8 mm corner radius increases edge strength and improves surface finish during finishing passes; it balances robustness and detail to suit a range of face‑milling tasks with the SDMT09T308‑D57 geometry. Is the Tiger‑tec Gold technology mainly a coating or substrate feature? Tiger‑tec Gold is a coating technology applied to a carefully matched carbide substrate; for the SDMT09T308‑D57 WKP35G this combination enhances wear resistance and edge stability under elevated temperatures common when machining steels and cast irons. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; there is no affiliation between our company and the mentioned manufacturers. The offered article is an original, factory‑new product of the specified manufacturer.
SDMT09T308-D57 WPP35G WPP35G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the WPP35G grade and a 15° free angle, this insert ensures durable performance and stable chip control in steel milling operations. Order the insert directly via Metav Werkzeuge or consult the technical team for tailored application advice. SDMT09T308-D57 WPP35G milling insert (for steel) — Tiger·tec Gold, 15° free angle | Walter Tools A SDMT09T308-D57 WPP35G milling insert designed for productive steel machining, offering a coated-carbide grade optimised for consistent wear resistance and chip formation in ISO P applications Tiger·tec Gold coating for long tool life Grade WPP35G optimised for steel 15° free angle for stable cutting Square 90° insert with r0.8 corners Reliable performance for steel milling with Tiger·tec Gold The combination of the Tiger·tec Gold coating and the WPP35G grade provides a balance of wear resistance and toughness specifically tuned for steel machining (ISO P). The coating reduces flank wear and increases thermal stability during continuous and interrupted cuts, which translates into longer tool life and fewer indexings. For workshop planners and process engineers, this means improved machining consistency and reduced tooling costs per part when compared with uncoated or generic grades. The cutting material is coated carbide, selected to handle the typical heat and chip formation associated with steel cutting. Geometry engineered for stability and surface quality A 15° free angle combined with the square 90° form and an r0.8 corner radius yields a robust cutting edge that resists chipping while supporting dimensional stability. The designated chipbreaker D57 promotes controlled chip formation, helping to evacuate chips reliably and maintain process security on medium- to heavy-duty milling operations. These geometric features improve the surface finish and allow stable feeds and depths of cut, which benefits productivity and reduces the likelihood of rework. Application guidance and process advantages With a tolerance class M and a thickness of T3, the insert is suitable for a wide range of steel types and machining conditions within the ISO P group. The WPP35G grade is a versatile, coated-carbide option that covers applications requiring a compromise between wear resistance and toughness. Where consistent cycle times and reproducible results are required, this insert supports efficient material removal while maintaining edge integrity. For optimal results, match the insert to compatible cutter bodies specified for the SDMT09T308 series and adjust cutting parameters to the workpiece grade and machine capacity. For high-productivity steel milling with a reliable coated-carbide solution, specify the Walter Tools SDMT09T308-D57 WPP35G insert and contact Metav Werkzeuge for application recommendations at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: SDMT09T308-D57-WPP35G-WALTER Article designation: SDMT09T308-D57 WPP35G Product type: Milling indexable insert Manufacturer: Walter Tools Facts Free angle: 15° Corner radius: 0.8 mm Insert size: 09 Thickness: T3 Tolerance class: M Special features Grade: WPP35G (Tiger·tec Gold coated carbide) Series: Tiger·tec Gold Chipbreaker: D57 Shape: Square 90° Material application: steel (ISO P) FAQ Which materials can this insert machine effectively? The SDMT09T308-D57 WPP35G insert from Walter Tools is optimised for steel machining and is designated for ISO P workpieces, making it suitable for unalloyed and alloyed steels. What benefit does the 15° free angle deliver? A 15° free angle on this insert improves cutting edge strength and reduces rubbing, supporting stable cutting and consistent surface quality in milling operations. How does the r0.8 corner radius affect performance? An r0.8 corner radius increases edge robustness, reducing the risk of chipping during interrupted cuts while contributing to a better surface finish on machined components. What does the WPP35G grade mean for tool life and toughness? WPP35G is a Walter Tools coated-carbide grade within the Tiger·tec Gold family that balances wear resistance and toughness, offering extended tool life under typical steel machining conditions. Is the insert compatible with standard SDMT clamping systems? The insert follows the SDMT09T308 designation and is compatible with cutter bodies designed for that insert format; ensure the cutter body accepts SDMT09T308 inserts and follow manufacturer mounting specifications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanation and product identification. There is no affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, factory-new product of the named manufacturer.
SDMT09T308-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the WSM35G grade and Tiger‑tec Gold coating combined with a 0.8 mm corner radius and D57 chipbreaker for extended tool life and reliable chip control in demanding stainless steel and superalloy applications. Order the SDMT09T308-D57 WSM35G milling insert directly via Metav Werkzeuge or ask our consultants if needed. SDMT09T308-D57 WSM35G milling insert — Walter Tools (Tiger‑tec Gold, for stainless steel and heat‑resistant alloys) SDMT09T308-D57 WSM35G is a coated carbide milling insert designed for heavy‑duty machining of stainless steel and heat‑resistant superalloys; square 90° form with a 15° clearance angle and D57 chipbreaker SDMT09T308-D57 WSM35G Tiger‑tec Gold coating Optimised for stainless steel and superalloys 0.8 mm corner radius for stable cutting edge Square 90° form with 15° clearance angle Durable coating that extends cutting life and process stability The Tiger‑tec Gold coating combined with the WSM35G grade is a coated carbide solution engineered for applications where heat generation and built‑up edge are critical. The coating increases surface hardness and thermal stability, which delays wear and reduces flank and crater damage during extended cuts. For series production on stainless steel and nickel‑based alloys, this translates into fewer tool changes and more predictable component tolerances, improving overall machining economy and process security. Geometry crafted for reliable chip formation and edge integrity A 0.8 mm corner radius and the D57 chipbreaker work together to control chip shape and minimise fracturing at the cutting edge. The square 90° form with a 15° clearance angle provides a rigid seating and a consistent cutting geometry that helps maintain surface finish and dimensional repeatability. The result is stable chip evacuation in tough materials and a reduced risk of edge chipping, which supports higher average metal removal rates and consistent cycle times. Designed for demanding materials with repeatable results Classified for material groups S and M, the insert supports machining of heat‑resistant superalloys, titanium and stainless steel. Tolerance class M ensures interchangeability and repeatable performance within tooling systems, which is essential for automated setups and quick tool changes. By combining a robust grade with a proven chipbreaker, the insert enables secure chip formation and contributes to a predictable tool life profile—benefits that directly affect throughput and scrap reduction. Practical integration and selection guidance for workshops The insert’s designation and compact form factor allow straightforward integration into compatible milling cutters and toolholders; the T3 thickness ensures sufficient rigidity for medium to heavy milling passes. When adapting cutting data for the grade, prioritise conservative feeds with progressive increases to monitor edge behaviour on stainless steel or nickel alloys. For detailed toolholder compatibility or cutting‑data recommendations, consult Metav Werkzeuge’s technical advisors to align the insert’s capabilities with specific machining strategies. Contact Metav Werkzeuge for tailored application advice and to secure genuine Walter Tools Tiger‑tec Gold inserts; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: SDMT09T308-D57-WSM35G-WALTER Product label: Fräswendeschneidplatte SDMT09T308-D57 WSM35G Walter Tools Designation: SDMT09T308-D57 WSM35G Manufacturer: Walter Tools Key figures Corner radius: 0.8 mm Clearance angle: 15° Plate size: 09 Thickness: T3 Plate form: Square 90° Tolerance class: M Special features Grade: WSM35G (Tiger‑tec Gold) Chipbreaker: D57 Coating: Tiger‑tec Gold coated carbide Material suitability: S / M Application focus: stainless steel; heat‑resistant superalloys and titanium Execution: T Series: Tiger‑tec Gold FAQ What materials is this insert suitable for? The SDMT09T308-D57 WSM35G insert is specified for material groups S and M and is particularly suited to stainless steel, heat‑resistant superalloys and titanium, offering enhanced edge stability for these demanding alloys. How does the Tiger‑tec Gold coating benefit machining? Tiger‑tec Gold on the WSM35G grade improves thermal resistance and wear behaviour for coated carbide inserts, enabling longer tool life and more consistent performance when machining high‑temperature alloys. What is the role of the D57 chipbreaker? The D57 chipbreaker is designed to shape and control chips in heavy or interrupted cuts, reducing the risk of built‑up edge and improving surface finish during the machining of stainless steel and superalloys. Can this insert be used for finish and roughing operations? The combination of a 0.8 mm corner radius and the Tiger‑tec Gold grade provides a balance between edge strength and geometry; it is suitable for both stable roughing and many finishing passes, depending on cutting conditions and toolholder rigidity. Which tolerance and form should be expected from the insert? The insert is manufactured to tolerance class M and has a square 90° plate form, ensuring accurate positioning and interchangeability in standard milling tool systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is original, factory‑new merchandise from the manufacturer.
SDMT09T308-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSP45G grade for consistent chip control and stable edge life; order directly via Metav Werkzeuge or consult our specialists for application guidance. SDMT09T308-D57 WSP45G milling indexable insert by Walter Tools — PVD‑coated carbide for P / M / S The SDMT09T308-D57 WSP45G is a square, 90° milling indexable insert designed for robust performance when machining steel, stainless steel and heat‑resistant alloys, offering a 15° clearance and a 0.8 mm corner radius for reliable cutting stability. Tiger·tec Gold PVD coating Suitable for P / M / S materials Square 90° geometry, 0.8 mm corner radius D57 chipbreaker for improved chip control Consistent cutting in demanding materials for fewer process interruptions The Tiger·tec Gold PVD technology combined with the WSP45G grade delivers a PVD-coated carbide formulation designed to manage the thermal and mechanical loads typical of steel, stainless steel and superalloys. This results in stable chip formation and reduced tendency for built‑up edge when machining tough materials. The square 90° geometry and the 0.8 mm corner radius provide a robust cutting corner that tolerates shock and intermittent cuts, helping to maintain part accuracy and reduce the need for frequent insert changes. Predictable tool life and improved process security through optimised chip control With a dedicated D57 chipbreaker and tolerance class M, the insert offers controlled chip formation and reproducible seating in the toolholder, which supports consistent cycle times and fewer quality deviations. The chipbreaker geometry assists swarf evacuation and reduces heat concentration at the cutting edge, contributing to consistent tool life and overall productivity gains. These technical advantages translate into fewer unplanned stoppages and a more economical machining process. Practical mounting and application guidance for reliable integration The insert is specified as SDMT09T308-D57 WSP45G, with a T3 thickness and 09 size, making it compatible with standard square milling cutter bodies that accept SDMT indexable inserts. The 15° clearance angle assists in edge engagement during face and shoulder milling, while the D57 chipbreaker suits a range of feed and speed settings typical for general milling operations. For tailored selection—whether priority is roughing stability or high‑quality finishing—Metav Werkzeuge can advise on the correct cutter bodies and recommended cutting parameters for each material group. For tailored application advice or to check availability of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SDMT09T308-D57-WSP45G-WALTER Article: SDMT09T308-D57 WSP45G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Facts Clearance angle: 15° Corner radius: 0.8 mm Plate form: Square 90° Plate size: 09 Plate thickness: T3 Chipbreaker: D57 Tolerance class: M Special features Coated carbide grade WSP45G Suitable for steel, stainless steel and superalloys (ISO P / M / S) Execution: T Robust edge for intermittent cuts Designed for controlled chip formation FAQ What materials can this insert machine effectively? The SDMT09T308-D57 WSP45G insert from Walter Tools is engineered for ISO groups P, M and S, meaning it is suitable for machining steel, stainless steel and heat‑resistant superalloys. How does the D57 chipbreaker affect performance? The D57 chipbreaker improves chip control and evacuation, which reduces heat concentration at the cutting edge and helps to extend the insert’s effective life during standard milling cycles. What does tolerance class M indicate for toolholders? Tolerance class M denotes a standardised seating accuracy that supports consistent clamping and reproducible cutting geometry when used with compatible cutter bodies for square inserts. Is the insert usable for interrupted or heavy engagement milling? Yes, the square 90° geometry and the 0.8 mm corner radius give the insert mechanical robustness suitable for intermittent cuts and moderate shock loads in milling. Which product designation should be ordered for this insert? Order the SDMT09T308-D57 WSP45G indexable insert by Walter Tools; reference SKU SDMT09T308-D57-WSP45G-WALTER when enquiring. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany. Protected trademarks and trade names remain the property of their respective owners. Brand names are used for explanation only and do not indicate any affiliation between our company and the trademark holders. The offered item is an original, factory‑new product from the manufacturer.
SDMT09T308-F57 WAK15 Wendeplatten - Walter Tools
Take advantage of the combination of high process stability, efficient chip control and precise fit for reliable aluminium machining — order directly via Metav Werkzeuge or consult our specialists for application support. SDMT09T308-F57 WAK15 milling insert (square 90°, 0.8 mm) – Walter Tools The SDMT09T308-F57 WAK15 is a square milling indexable insert engineered for high-performance machining of aluminium and other non‑ferrous metals, offering sharp cutting geometry and optimised chip evacuation. Uncoated carbide grade WAK15 for aluminium Square 90° insert form 0.8 mm corner radius 15° clearance angle Tolerance class M for consistent fit Faster, cleaner results for aluminium and non‑ferrous work The combination of the WAK15 grade and the chipbreaker F57 delivers a machining solution tailored to aluminium and similar non‑ferrous materials. The uncoated carbide substrate provides a very sharp cutting edge that reduces material adhesion and minimises built‑up edge, while the chipbreaker geometry encourages short, controlled chips. The direct benefit is improved surface quality and fewer interruptions for manual cleaning, which raises throughput and reduces non‑productive time. For shops aiming to increase part quality in series production, this geometry balances cutting performance with reliable tool life. Consistent assembly and repeatable machining accuracy With tolerance class M and a square 90° form, the insert ensures predictable positioning in compatible tool holders. The 15° clearance angle supports a stable cutting geometry that reduces rubbing on the flank and lowers cutting forces during engagement. The nominal size designation (09) and thickness T3 give a compact, stiff insert body suitable for medium‑feed milling operations. These features translate into reproducible results across batches and simplify tool change procedures, helping to maintain tight tolerances in repetitive production environments. Reliable chip control and surface finish with low rework risk A 0.8 mm corner radius provides a practical balance between edge strength and finish capability: it improves resistance to edge chipping while still enabling a fine surface on finishing passes. The F57 chipbreaker is configured to break and eject chips effectively when cutting non‑ferrous materials, reducing the chance of recutting or surface marks. The insert’s uncluttered geometry makes it well suited to high feed rates where consistent chip behaviour is essential, supporting higher material removal rates with fewer quality deviations and less manual rework. Contact Metav Werkzeuge for an application assessment and tailored supply of Walter Tools SDMT09T308-F57 WAK15 inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: SDMT09T308-F57-WAK15-WALTER Designation: SDMT09T308-F57 WAK15 Manufacturer: Walter Tools Product type: milling indexable insert Series: Walter N-Sortensystem Facts Clearance angle: 15° Corner radius: 0.8 mm Insert size: 09 Thickness: T3 Form: Square 90° Tolerance class: M Special features Grade: WAK15 (uncoated carbide) Chipbreaker: F57 Material application: Aluminium and non‑ferrous metals Series: Walter N‑Series Execution: T FAQ Which materials are best suited to this insert? The SDMT09T308-F57 WAK15 insert is optimised for aluminium and other non‑ferrous metals; the WAK15 grade and F57 geometry reduce material adhesion and ensure controlled chips. Is the cutting grade coated? The WAK15 grade used in the SDMT09T308-F57 is an uncoated carbide formulation designed to maintain a very sharp edge for non‑ferrous machining. What does the 0.8 mm corner radius affect in practice? A 0.8 mm corner radius on the SDMT09T308-F57 increases edge strength and improves surface finish on light to medium finishing passes while maintaining acceptable cutting forces. How does the chipbreaker F57 influence machining? The F57 chipbreaker promotes short, controllable chips when cutting aluminium and similar materials, reducing the risk of chip entanglement and improving process consistency with the SDMT09T308-F57 WAK15. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned exclusively for clarification and comparison. There is no affiliation between our company and the brands named. The offered article is an original, factory‑new product of the manufacturer Walter Tools.
SDMT09T308-F57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Silver grade, precise square geometry and robust chip control for consistent productivity in steel and cast iron machining; order directly via Metav Werkzeuge or ask their consultants for application support. SDMT09T308-F57 WKP25S milling indexable insert – Square 90°, 15° relief, Tiger‑tec Silver (Walter Tools) A high-performance milling indexable insert, SDMT09T308-F57 WKP25S, developed for productive machining of steel and cast iron in general milling operations. Tiger‑tec Silver coating technology Designed for steel and cast iron Square 90° insert, corner radius 0.8 mm 15° relief angle, chipbreaker F57 Deliver consistent metal removal with a coated, wear‑resistant grade The Tiger‑tec Silver grade WKP25S combines a durable coating with a coated carbide substrate to deliver stable tool life and predictable wear rates when machining steel and cast iron. The specific combination of substrate and surface finish improves resistance to abrasive wear and thermal loading typical in P‑ and K‑class materials. With the integrated chipbreaker F57, chip formation is controlled to reduce interruptions and improve surface integrity, helping to maintain cycle times and reduce secondary operations. Exact geometry for repeatable results and secure clamping The square 90° geometry with a 0.8 mm corner radius and 15° relief angle creates a robust cutting edge suitable for shoulder milling and general profiling where edge strength is required. The insert’s T3 thickness and size code 09 provide mechanical stability, while tolerance class M ensures interchangeability and reproducible seat fit in standard toolholders. These dimensional characteristics reduce vibration and enable predictable process windows, which supports both throughput and part quality in serial production. Practical integration in shop‑floor tooling systems Built as a conventional indexable insert, this plate fits established milling tool systems and is straightforward to replace during tool changes. The grade’s focus on stable chip formation and broad workpiece compatibility cuts set‑up time and minimises trial‑and‑error when switching from roughing to finishing passes. For manufacturers seeking to reduce downtime, the combination of a proven coated carbide grade and a dedicated chipbreaker offers a clear route to longer edge life and consistent surface finish with fewer tool interventions. Contact Metav Werkzeuge today for application-specific recommendations on the Tiger‑tec Silver WKP25S inserts and to secure supply through Metav Werkzeuge. Technical Data SKU: SDMT09T308-F57-WKP25S-WALTER Label: Fräswendeschneidplatte SDMT09T308-F57 WKP25S Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKP25S Product type: Milling indexable insert Core data Insert size: 09 Thickness: T3 Relief angle: 15° Corner radius: 0.8 mm Plate form: Square 90° Tolerance class: M Special features Coating/grade: Tiger‑tec Silver, WKP25S Chipbreaker: F57 Material applicability: Steel (P), Cast iron (K) Construction: T‑type Material code: P / K Series description: coated carbide FAQ What materials is this insert suitable for? The SDMT09T308-F57 WKP25S insert (Walter Tools, Tiger‑tec Silver) is designed for machining steel (P) and cast iron (K) as indicated by its grade and chipbreaker geometry. How does the WKP25S grade affect tool life? WKP25S, as part of the Tiger‑tec Silver family, provides a wear‑resistant coating and substrate pairing that extends edge life under thermal and abrasive loads typical when machining steel and cast iron. What is the purpose of the F57 chipbreaker? The F57 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of entanglement and supporting stable cutting conditions in both roughing and semi‑finishing operations. Can this insert be used for shoulder milling? Yes; the square 90° geometry and 0.8 mm corner radius make the insert suitable for shoulder milling and other operations requiring robust cutting edges. Is the SDMT09T308-F57 compatible with standard holders? The insert follows common indexable plate dimensions and tolerance class M, allowing compatibility with standard T‑type milling holders designed for this plate size. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not indicate any affiliation. The offered article is original, brand‑new product of the manufacturer Walter Tools.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com