SDMT09T3AZN-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WSM35G grade for reliable machining of difficult-to-cut materials; the square 90° geometry with a 15° clearance and chipbreaker D57 ensures stable chip control and edge life. Order directly via Metav Werkzeuge or consult the technical team for application advice. SDMT09T3AZN-D57 WSM35G Fräswendeschneidplatte by Walter Tools – coated carbide, Tiger·tec Gold, for stainless steels and superalloys The SDMT09T3AZN-D57 WSM35G is a square 90° indexable milling insert designed for productive machining of rostfreier Stahl and heat-resistant superalloys, offering a robust coated-carbide grade and a D57 chipbreaker for consistent chip control *Tiger·tec Gold coating for high thermal resistance *Suitable for rostfreie Stähle and superalloys *Square 90° insert with 15° clearance *Chipbreaker D57 for stable chip formation Productive machining of tough materials with consistent edge life The insert is manufactured in the Tiger·tec Gold series, a coated-carbide solution engineered for high thermal and mechanical stress. This coating supports a stable cutting edge when machining rostfreier Stahl and nickel-based superalloys, where heat generation and workpiece toughness challenge tool life. As a consequence, the insert offers improved process reliability and reduced downtime compared with uncoated grades, enabling higher metal removal rates under controlled conditions. Using a coated carbide grade means fewer tool changes and a steadier production flow for demanding components. Geometry and chip control that reduce rework and cycle time The square 90° geometry combined with a 15° clearance and the D57 chipbreaker gives predictable chip formation and efficient evacuation. A well-designed chipbreaker reduces the risk of built-up edge and helps maintain surface finish quality on long, interrupted cuts typical for stainless steels and superalloys. The T3 plate thickness contributes to mechanical stability in the pocket, supporting repeatable seating and secure clamping in modern toolholders. These factors together translate into measurable productivity improvements and fewer rejects during finishing operations. Practical advantages for workshop integration and selection The insert’s WSM35G grade and medium tolerance class (M) make it suitable for indexable-tool systems that require consistent seat accuracy. The SDMT09T3AZN-D57 form factor permits straightforward matching with standard square 90° milling bodies, and the clearly defined chipbreaker geometry simplifies process setup for new components. Choosing this grade supports a broad spectrum of applications from heavy-duty roughing to semi-finishing in components where heat resistance and edge stability are priorities, reducing the need for frequent tool qualification or complex cooling strategies. Contact Metav Werkzeuge for tailored recommendations on tooling combinations and application data, or request a consultation to confirm suitability for specific rostfreier Stahl or superalloy operations — Metav Werkzeuge is reachable at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: SDMT09T3AZN-D57-WSM35G-WALTER SKU: SDMT09T3AZN-D57-WSM35G-WALTER Product type: Fräswendeschneidplatte Brand: Walter Tools Series: Tiger-tec Gold Grade: WSM35G Facts Clearance angle: 15° Plate form: Square 90° Plate size: 09 Plate thickness: T3 Chipbreaker: D57 Tolerance class: M Special features Coating: Tiger·tec Gold Material: Coated carbide Suitable for: rostfreier Stahl (M) Suitable for: heat-resistant superalloys and titanium (S) Geometry: square 90° indexable insert FAQ Which materials is this insert suitable for? The SDMT09T3AZN-D57 WSM35G insert is suitable for rostfreier Stahl and heat-resistant superalloys (designation M and S), offering improved performance where heat resistance and stable edge life are required. What coating and substrate does the insert use? The insert uses the Tiger·tec Gold coating on a coated carbide substrate, designed for thermal resistance and wear protection in demanding milling operations. What are the key geometric features that affect cutting behaviour? Key features include the square 90° form, 15° clearance angle, T3 thickness, and the D57 chipbreaker, which together influence chip formation, tool stability and repeatable seating in the toolholder. How does the WSM35G grade help with machining stainless steels? The WSM35G grade is engineered for secure chip control and a stable cutting edge when machining tough and adhesive workpiece materials, improving process reliability and edge life under elevated temperatures. Is the insert compatible with standard toolholders for square 90° inserts? The SDMT09T3AZN-D57 WSM35G is produced in a common square 90° form factor intended for compatible indexable milling bodies; ensure the holder accepts the SDMT09T3AZN-D57 designation for correct fit. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMT09T3AZN-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold PVD technology, versatile material compatibility and a compact square 90° geometry with 15° relief for reliable, high-performance milling; order directly via Metav Werkzeuge or ask the consultants for cutting data and application advice. SDMT09T3AZN-D57 WSP45G milling insert — Tiger·tec Gold, square 90°, 15° relief | Walter Tools The SDMT09T3AZN-D57 WSP45G is a square milling insert engineered for versatile milling applications, delivering robust edge stability and controlled chip formation across a wide range of workpiece materials. Tiger·tec Gold PVD coating Versatile for Stahl, rostfreier Stahl, S-alloys Square 90° geometry with 15° relief Chipbreaker D57 for stable chip control Consistent performance through advanced coating and substrate The design combines a PVD-coated carbide substrate with the WSP45G grade from the Tiger·tec Gold family to provide outstanding wear resistance and thermal stability. This combination supports predictable tool life and reproducible results when machining Stahl, rostfreier Stahl and heat-resistant alloys (ISO group S). The PVD layer reduces adhesion and flank wear, while the substrate tolerates the heat and mechanical loads typical of medium to high cutting speeds, leading to fewer tool changes and a smoother production flow. Geometry and chip control for secure milling The insert’s square 90° format together with a 15° relief angle and T3 thickness gives a balance between rigidity and accessibility for common face and shoulder milling tasks. The integrated D57 chipbreaker promotes reliable chip formation, preventing stringing and minimising the risk of built-up edge on ductile materials. This geometry also helps maintain a stable cutting edge, which improves surface finish and reduces vibration during interrupted cuts or when working with variable material batches. Process reliability, tolerance and shop-floor benefits Produced to tolerance class M, the component ensures repeatable seating and clamping in indexable cutter bodies, supporting consistent run-out and predictable machining results. The insert’s versatility lowers tooling complexity in mixed-production environments, contributing to higher overall productivity and cost efficiency. Backed by the reputation of Walter Tools, the grade and series provide a technically transparent solution for operations that require a durable, all-round milling insert with good chip control and long edge life. Contact Metav Werkzeuge for tailored cutting data and application advice on Walter Tools Tiger·tec Gold inserts: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: SDMT09T3AZN-D57-WSP45G-WALTER Article designation: SDMT09T3AZN-D57 WSP45G Product type: milling insert (Fräswendeschneidplatte) Manufacturer: Walter Tools Facts Relief angle: 15° Insert geometry: Square 90° Insert size: 09 Thickness: T3 Tolerance class: M Chipbreaker: D57 Special features Series: Tiger·tec Gold Grade: WSP45G (PVD-coated carbide) Material suitability: Stahl; rostfreier Stahl; S (superalloys & titanium) Chip control: D57 Form: Quadrate 90° FAQ Which workpiece materials is this insert suitable for? The SDMT09T3AZN-D57 WSP45G is specified for machining Stahl, rostfreier Stahl and heat-resistant alloys (ISO group S), offering reliable chip control and wear resistance across these material groups. For which milling operations is the insert intended? This indexable insert is intended for general milling tasks including face and shoulder milling where a robust 90° corner and good chip control are required; the geometry supports both semi-finishing and finishing passes. How does the D57 chipbreaker improve machining? The D57 chipbreaker promotes short, controllable chips and reduces the tendency for build-up on the cutting edge, which improves surface finish and reduces unplanned interruptions during production. What does tolerance class M mean for shop-floor use? Tolerance class M indicates consistent manufacturing tolerances that help ensure reproducible seating and clamping in the cutter body, supporting steady run-out and predictable cutting performance. Is the insert compatible with standard indexable cutter bodies for SDMT geometry? The insert matches standard cutter bodies designed for the SDMT09T3AZN-D57 geometry; confirm seat and clamp specifications in the toolholder documentation to ensure correct fit and stability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is original and factory-new from Walter Tools.
SDMT09T3AZN-F57 WKP25S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Silver coating, the WKP25S grade and a 15° clearance that together deliver consistent wear resistance and stable chip control in steel and cast-iron milling; order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. SDMT09T3AZN-F57 WKP25S milling insert – Tiger·tec Silver, 15° clearance (Walter Tools) The SDMT09T3AZN-F57 WKP25S is a square 90° milling insert engineered for productive machining of steel and cast iron with a Tiger·tec Silver coated, T3-thickness construction. Tiger·tec Silver coating for high wear resistance WKP25S grade optimised for steel and cast iron Square 90° geometry with 15° clearance T3 thickness for stable cutting edge and repeatability Consistent chip control for more productive milling The square 90° geometry combined with the F57 chipbreaker provides reliable chip formation during interrupted and continuous cuts, which reduces secondary operations and machine downtime. Designed for common steel and cast-iron tasks, the insert’s geometry promotes predictable chip flow and lowers the risk of built-up edge. The result is improved process stability and fewer rejected parts when machining components where repeatable dimensions matter. Longer edge life thanks to advanced coating and grade The Tiger·tec Silver coating together with the WKP25S coated carbide grade reduces abrasive wear and resists thermal stress during typical steel and cast-iron applications. This coating technology is developed to preserve the cutting edge at elevated cutting speeds, extending tool life and cutting intervals. For production environments where tool change frequency affects cycle time, this combination is an economical choice that supports consistent surface finish and dimensional accuracy. Robust mechanical design for secure clamping and repeatability With a T3 thickness and M tolerance class, the insert offers mechanical stability and repeatable seating in standard milling toolholders. The square format with a 90° cutting corner enables straightforward indexation and multiple effective cutting edges per insert, improving usage efficiency. The 15° clearance angle reduces friction at the flank, lowering cutting temperatures and enabling stable performance in a wide range of feeds and depths of cut. Application focus and where the insert adds most value This insert is intended primarily for machining operations involving unalloyed and alloyed steels as well as cast irons, reflecting the P/K applicability classification. It suits face and shoulder milling tasks where robust edge retention and reliable chip breaking are required. For engineers seeking a balance between tool life and productivity, the SDMT09T3AZN-F57 WKP25S insert supports higher process reliability and predictable component quality in medium-to-high volume production settings. Contact Metav Werkzeuge for tailored application advice on Walter Tools’ SDMT09T3AZN-F57 WKP25S insert with Tiger·tec Silver coating and to arrange procurement or technical consultation directly through Metav Werkzeuge, eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: SDMT09T3AZN-F57-WKP25S-WALTER Designation: SDMT09T3AZN-F57 WKP25S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP25S Facts Clearance angle: 15° Shape: Square 90° Size designation: 09 Thickness: T3 Tolerance class: M Special features Chipbreaker: F57 Coating: Tiger·tec Silver Coated carbide grade: WKP25S Material applicability: P (steel), K (cast iron) Main application: productive milling of steel and cast iron FAQ What materials are suitable for this insert? The SDMT09T3AZN-F57 WKP25S insert is specified for P (steel) and K (cast iron) applications and is optimised for machining unalloyed/alloyed steels and cast-iron components. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating on the WKP25S grade reduces abrasive wear and improves thermal resistance, extending edge life and maintaining surface quality in typical milling operations. What does the 15° clearance provide in practice? A 15° clearance angle reduces flank contact and friction, which helps to lower cutting temperatures and supports stable tool performance across varying feeds and depths of cut. Is the insert suitable for interrupted cuts and heavy milling? Yes, the square 90° geometry and F57 chipbreaker are designed to provide controlled chip formation and stable cutting in many interrupted and continuous milling scenarios. How many cutting edges are available per insert and how is repeatability ensured? The square format provides multiple indexable cutting edges; the T3 thickness and M tolerance class ensure secure seating and repeatable positioning in compatible milling holders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
SDMT09T3AZN-F57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WKP35G grade and a 15° free angle to secure stable, productive milling in steel and cast iron; order or consult via Metav Werkzeuge for tailored recommendations. SDMT09T3AZN-F57 WKP35G — Indexable milling insert for steel and cast iron by Walter Tools, Tiger‑tec Gold, 15° free angle SDMT09T3AZN-F57 WKP35G is an indexable milling insert engineered for efficient material removal in steel and cast iron applications, combining a robust chipbreaker and Tiger‑tec Gold coating for extended cutting performance. Tiger‑tec Gold coating for extended tool life WKP35G grade for steel and cast iron machining 15° free angle for stable cutting geometry Square 90° form with T3 thickness, F57 chipbreaker Consistent performance and longer service life The insert is built on a coated carbide substrate and the Tiger‑tec Gold technology, which together reduce abrasive wear and maintain a stable cutting edge during prolonged cycles. The WKP35G grade has been matched to typical steel and cast iron machining demands to ensure consistent chip formation and predictable tool life. This engineered combination results in fewer tool changes and a lower cost per component while maintaining machining reliability. Optimised for steel and cast iron operations Thanks to the F57 chipbreaker and the 15° free angle, the geometry promotes controlled chip flow and reduces edge loading in interrupted or continuous cuts. The square 90° format provides robust cutting corners for both roughing and medium finishing tasks, offering flexibility across a range of operations. Where ISO group P (steel) and K (cast iron) are involved, the insert’s design helps to balance effective material removal with a stable surface finish. Economic machining and simple toolset integration With a T3 thickness and tolerance class M, the insert is compatible with standard insert holders and clamping systems, making retrofit and toolset standardisation straightforward. The Tiger‑tec Gold series is intended to deliver productive machining through improved wear resistance and consistent dimensional performance, which supports higher uptime and predictable process outcomes. This makes the insert a pragmatic choice for production environments seeking reproducible results. For procurement of the Walter Tools SDMT09T3AZN-F57 WKP35G insert or for application-specific advice, contact Metav Werkzeuge for a practical recommendation and rapid delivery support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: SDMT09T3AZN-F57-WKP35G-WALTER Label: Fräswendeschneidplatte SDMT09T3AZN-F57 WKP35G Walter Tools Product type: Indexable milling insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WKP35G Designation: SDMT09T3AZN-F57 Execution: T Chipbreaker: F57 Material designation: P / K Tolerance class: M Facts Free angle: 15° Plate form angle: 90° Plate size: 09 Thickness: T3 Tolerance class: M Special features Coating technology: Tiger‑tec Gold Substrate: Coated carbide Chip management: F57 chipbreaker Shape: Square 90° Main applications: Steel (ISO P) and Cast iron (ISO K) Series benefit: Stable chip formation and productive cutting FAQ What materials is this insert suitable for? The SDMT09T3AZN-F57 WKP35G insert by Walter Tools is specified for steel (ISO group P) and cast iron (ISO group K), reflecting the intended application areas of the Tiger‑tec Gold grade. How does the Tiger‑tec Gold coating improve tool life? The Tiger‑tec Gold coating on the SDMT09T3AZN-F57 WKP35G reduces abrasive wear and enhances edge stability, which extends service life and helps to maintain consistent surface quality over longer production runs. Which cutting geometry is offered and what are the benefits? The insert provides a square 90° shape with a 15° free angle and an F57 chipbreaker, promoting reliable corner strength, controlled chip evacuation and stable cutting forces suitable for a variety of milling scenarios. Is the insert aimed at roughing or finishing tasks? The combination of WKP35G grade and the F57 chipbreaker enables productive material removal while still supporting good surface quality; the geometry is therefore suitable for both roughing and medium finishing operations depending on cutting parameters. How precise is the insert for repeatable setups? With a tolerance class M and standard T3 thickness, the insert supports repeatable positioning in standard clamping systems, which aids consistent tool performance and process stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are cited for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of Walter Tools.
SDMT09T3AZN-F57 WPP35G Wendeplatten - Walter Tools
Take advantage of the coated‑carbide WPP35G grade and the Tiger·tec Gold technology for longer tool life and stable chip formation in steel machining; combine these strengths with the controlled‑chip design of the F57 chipbreaker for consistent surface quality and reduced downtime. Order the inserts directly via Metav Werkzeuge or consult our specialists for application advice. SDMT09T3AZN-F57 WPP35G milling insert — Tiger·tec Gold, 15° clearance (Walter Tools) The SDMT09T3AZN-F57 WPP35G is a coated carbide milling insert optimised for steel (ISO P) machining, offering reliable chip control for shoulder and face milling operations. Tiger·tec Gold coating for extended tool life Grade WPP35G optimised for steel machining Square 90° shape for robust shoulder milling 15° clearance and F57 chipbreaker for controlled chips Higher productivity through advanced coating and grade The combination of the Tiger·tec Gold coating and the WPP35G grade delivers a tangible productivity advantage in steel machining. The coating technology reduces flank wear and improves heat resistance, which extends tool life under cyclic loads and elevated temperatures. In practice, this means fewer index changes and longer cutting windows on medium and high‑strength steels. The insert’s coated carbide substrate is formulated for stability during continuous and interrupted cuts, helping maintain tool geometry and consistent part tolerances. Consistent chip control and surface quality for milling operations Designed with a Square 90° form and the F57 chipbreaker, this insert provides predictable chip formation and evacuation, which is essential for shoulder milling and face operations. The 15° clearance angle lowers cutting forces and reduces rubbing at the flank, supporting a steadier tool‑workpiece interaction and improved surface finish. The insert thickness T3 contributes to rigidity at the cutting edge, decreasing vibration and enabling reliable performance in demanding passes. These characteristics result in fewer reworks and a consistently high surface quality on components made from steel. Application flexibility and process reliability The insert is specified for the ISO group P (steel) and is suitable for a broad range of unalloyed and alloyed steels. The WPP35G grade balances wear resistance and toughness, making it effective across a range of cutting conditions where stable chip formation and edge integrity are required. For production environments seeking predictable cycle times, the coated grade supports higher productivity and repeatable results, while the geometry and chipbreaker reduce the need for extensive process tuning. Walter Tools’ proven substrate and coating combination supports repeatable tool life and consistent batch outcomes. For technical consultation and prompt supply of Walter Tools SDMT09T3AZN-F57 WPP35G inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application details and availability. Technical data Article number: SDMT09T3AZN-F57-WPP35G-WALTER Core data Thickness: T3 Free angle: 15° Shape: Square 90° Size: 09 Tolerance class: M Chipbreaker: F57 Special features Series: Tiger·tec Gold Grade: WPP35G Substrate: coated carbide Applicable to: Steel (ISO P) FAQ What materials is this insert intended for? The SDMT09T3AZN‑F57 WPP35G insert from Walter Tools is designed primarily for steels (ISO P), covering unalloyed and alloyed grades typically encountered in general machining. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating enhances heat resistance and wear protection, which prolongs cutting edge life and stabilises performance during extended and repeated cuts. Which milling tasks suit the Square 90° form with F57 chipbreaker? The square 90° geometry with the F57 chipbreaker is well suited to shoulder and face milling where robust edge support and controlled chip flow are required for consistent surface finish. What does the designation T3 signify for this insert? T3 indicates the insert’s thickness class, contributing to cutting‑edge rigidity and improved stability in interrupted cuts and heavier milling passes. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
SDMT09T3AZN-F57 WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of the combination of a specialised WSM45X grade, a chipbreaker F57 for controlled chip flow, and a robust square 90° geometry to secure consistent production on rostfreier Stahl and heat‑resistant superalloys. Order the insert directly via Metav Werkzeuge or consult our technical team for integration advice. SDMT09T3AZN-F57 WSM45X — Square 90° milling indexable insert, 15° clearance (Walter Tools) The SDMT09T3AZN-F57 WSM45X is a precision milling insert designed for face and shoulder operations on rostfreier Stahl and high‑temperature alloys, combining a coated carbide grade with a reliable chipbreaker for stable cutting. WSM45X grade for rostfreier Stahl and superalloys 15° clearance for secure chip control Square 90° geometry for versatile face milling Consistent machining of difficult alloys with proven grade technology The open‑series WSM45X is a coated carbide grade developed for machining materials that challenge standard inserts. Its formulation favours a stable cutting edge under thermal stress, which reduces the tendency for built‑up edge when working with rostfreier Stahl and heat‑resistant superalloys (designation S / M). The result is improved process reliability and predictable tool life, especially in demanding production environments where consistent surface finish and repeatability are required. Superior chip control and edge security for uninterrupted production Equipped with the chipbreaker F57 and a T3 thickness, this indexable cutting solution prioritises secure chip formation and evacuation. The moderate 15° clearance angle minimises rubbing while maintaining edge strength, so the insert delivers controlled chips and less frequent interruptions for manual clearing. Together, the geometry and chipbreaker support higher feed rates and steady tool performance, translating directly into increased throughput for milling operations. Geometry and applications that deliver practical benefits at the machine The square 90° insert form provides four usable cutting corners and is well suited to face milling and shoulder milling layouts. The insert size 09 and its standardised designation align with common milling toolholders, simplifying tool inventory and replacement. For shops transitioning between rostfreier Stahl and nickel‑based alloys, the insert offers a balance between edge robustness and coating protection, reducing setup changes and helping maintain stable cycle times. Integration advice and handling for best results To exploit the grade and geometry, pair the insert with rigid toolholders and a strategy that prioritises steady engagement and adequate coolant where appropriate. The coated carbide composition of the grade benefits from consistent cutting parameters: controlled depth of cut and stable spindle speeds will extend edge life. For initial trials, moderate feeds with incremental increases are advisable to confirm optimal chip formation with the F57 breaker and to fine‑tune surface finish parameters. Contact Metav Werkzeuge for application guidance and to arrange supply of Walter Tools inserts for your specific milling setup — Metav Werkzeuge’s technical team can advise on toolholder compatibility and cutting parameters. Technical data Article number: SDMT09T3AZN-F57-WSM45X-WALTER SKU: SDMT09T3AZN-F57-WSM45X-WALTER Product type: Fräswendeschneidplatte / milling indexable insert Brand: Walter Tools Facts Relief angle: 15° Insert shape: Square 90° Insert size: 09 Plate thickness: T3 Special features Grade: WSM45X (coated carbide) Chipbreaker: F57 Series: Walter Schneidstoffsorte - Serie offen Tolerance class: M Material suitability: S / M (rostfreier Stahl; heat‑resistant superalloys and titanium) FAQ What materials is this insert suitable for? The SDMT09T3AZN‑F57 WSM45X insert is tailored for rostfreier Stahl and heat‑resistant superalloys (designation S / M), offering secure chip control and edge stability in these materials. How does the chipbreaker F57 affect cutting performance? The F57 chipbreaker promotes predictable chip formation and evacuation; in combination with the coated WSM45X grade it reduces built‑up edge and supports continuous milling cycles. What benefits does the square 90° geometry provide? Square 90° geometry gives four usable cutting corners and robust edge strength for face and shoulder milling, improving tool economy and setup flexibility with the SDMT09T3AZN‑F57. Is the insert compatible with standard toolholders? The SDMT09T3AZN‑F57 follows common insert dimensions and can be mounted in standard square 90° cutter bodies; verify holder compatibility and clamping method before first use. What thickness and relief angle should be considered for heavy cuts? The T3 thickness together with a 15° relief angle provides a balance of edge strength and clearance, suitable for interrupted cuts and heavier face milling operations when used with appropriate feeds and rigid clamping. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
SDMT09T3AZN-F57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of a versatile, PVD-coated insert that combines reliable cutting-edge stability with broad material capability for uninterrupted milling operations; its Tiger·tec Gold grade and F57 chipbreaker reduce edge wear and support consistent surface quality. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. SDMT09T3AZN-F57 WSP45G – milling indexable insert (Tiger·tec Gold, 15° relief) by Walter Tools A SDMT09T3AZN-F57 WSP45G indexable milling insert designed for general-purpose to demanding finishing work across steel, stainless steel and heat-resistant alloys, offered in a square 90° form for versatile toolpath options. Tiger·tec Gold PVD coating WSP45G 15° relief for secure chip control Square 90° form, size 09 F57 chipbreaker for stable cutting edge Precise performance across steels, stainless and superalloys The insert is engineered around the Tiger·tec Gold concept, delivering a balance of wear resistance and toughness through a high-quality PVD coating on coated carbide. The selected grade, WSP45G, is formulated for the heat and strain typical when machining steel, stainless steel and high-temperature alloys; this enables controlled chip formation and predictable tool life. By choosing a plate in square 90° geometry with a 15° relief angle, the design supports both shoulder milling and finishing passes while maintaining a stable cutting edge that helps achieve a consistent surface finish with fewer reworks. Robust cutting edge and predictable tool life The combination of a specific chipbreaker and plate thickness provides measurable machining advantages. The F57 chipbreaker promotes short, manageable chips in finishing and medium machining, reducing the risk of built-up edge and improving surface integrity. A T3 plate thickness contributes to rigidity in interrupted cuts and when changing depths of cut. The coated carbide substrate and coating pairing reduce flank wear and support longer intervals between indexings, which translates into fewer tool changes and higher machine uptime. Technical terms: PVD denotes the physical vapour deposition process used to apply the wear layer; this improves adhesion and hardness without compromising toughness. Practical selection and application notes for production workflows Selection should match the workpiece material group and the machining strategy: the grade targets the ISO groups P, M, S, so it is suitable where a mix of general-purpose and high-temperature alloy tasks occur. The square 90° plate offers flexibility for multiple cutting orientations, while the specified size supports popular tool body standards. For optimal results, pair the insert with a rigid toolholder and ensure correct clamp torque and coolant strategy depending on the alloy; stable fixturing and correct cutting data maximise the benefits of the WSP45G grade. For detailed cutting data tailored to specific machines and materials, professional application guidance is recommended. Contact Metav Werkzeuge for personalised application advice and availability – email info@metav-werkzeuge.com or call +49 2822 7131930 to review machining parameters and compatible toolholders Technical data Article number: SDMT09T3AZN-F57-WSP45G-WALTER Description: Fräswendeschneidplatte SDMT09T3AZN-F57 WSP45G Walter Tools Product type: Fräswendeschneidplatte / milling indexable insert Manufacturer: Walter Tools Facts Tolerance class: M Relief angle: 15° Plate form: Square 90° Plate size: 09 Plate thickness: T3 Special features Series: Tiger·tec Gold Grade: WSP45G Chipbreaker: F57 Material suitability: P / M / S Base designation: SDMT09T3AZN-F57 ISO designation: SDMT09T3AZN-F57 WSP45G FAQ What materials is this insert suitable for? The SDMT09T3AZN-F57 WSP45G insert from Walter Tools is suitable for ISO groups P (steel), M (stainless steel) and S (heat-resistant superalloys and titanium), offering controlled chip formation across these materials. How does the Tiger·tec Gold grade benefit milling applications? The Tiger·tec Gold coating on the WSP45G grade combines wear resistance with toughness, which helps the SDMT09T3AZN-F57 insert maintain a stable cutting edge and extend tool life in mixed machining tasks. What does the F57 chipbreaker provide in practical terms? The F57 chipbreaker is designed to produce short, controllable chips during finishing and medium cutting operations, reducing built-up edge and improving surface quality when using the SDMT09T3AZN-F57 WSP45G insert. Can this insert be used for shoulder milling and finishing? Yes; the square 90° form and 15° relief angle make the insert versatile for shoulder milling and finishing passes while maintaining rigidity and a consistent surface finish. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names, including Walter Tools, are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
SDMT09T3ZDR-D57 WKP35G Wendeplatten - Walter Tools
Take advantage of high process security and broad material coverage with a Tiger·tec Gold-coated grade and a proven chipbreaker geometry; the result is reliable edge life and consistent surface quality. Order the insert directly via Metav Werkzeuge or consult our specialists for cutting data and application support. SDMT09T3ZDR-D57 WKP35G – indexable milling insert, Tiger·tec Gold, for Steel and Cast iron (Walter Tools) SDMT09T3ZDR-D57 WKP35G is a square 90° indexable milling insert designed for stable chip formation and productive machining in steel and cast iron applications. Tiger·tec Gold coating for high productivity Suitable for Steel and Cast iron machining Square 90° insert with four cutting edges 15° relief angle and T3 thickness for rigidity Consistent productivity through coated-carbide technology The combination of the Tiger·tec Gold coating and the WKP35G grade provides coated carbide performance tuned for demanding milling. The multi-layer coating increases wear resistance and reduces built-up edge, which means more consistent tool life and fewer interruptions in production. The integrated chipbreaker D57 supports controlled chip formation on both Steel and Cast iron, reducing the risk of chip-related damage and improving process repeatability. This results in measurable improvements in machining stability and component surface quality. Robust geometry for reliable machining results The square 90° shape offers four usable cutting edges per insert, improving economy per edge change, while the 15° relief angle reduces rubbing and helps maintain cutting action under load. The T3 thickness contributes to rigidity, making the geometry well suited to interrupted cuts and medium-duty milling passes. The tolerance class M ensures interchangeability and predictable seating, which supports quick indexation and lower set-up times. Altogether, these characteristics deliver a balance of stiffness and edge security for catalogue-geometry dependent milling operations. Practical integration and application support for production use Engineered for common milling tasks, this insert is appropriate for semi-finishing and finishing operations in components made from Steel (ISO group P) and Cast iron (ISO group K). Its design facilitates reproducible chip control and consistent tool life across batch production. When incorporating the insert into tooling systems, select compatible cutter bodies and follow manufacturer cutting parameters for speed and feed; adjustments to depth of cut and coolant application will fine-tune performance. For specification-driven production environments, the insert merges process reliability with straightforward handling and economy of use. Contact Metav Werkzeuge for tailored cutting data, application advice or material‑specific recommendations for the SDMT09T3ZDR-D57 WKP35G insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for direct support and fast delivery options Technical data Article number: SDMT09T3ZDR-D57-WKP35G-WALTER Product type: Indexable milling insert (milling carbide insert) Brand: Walter Tools Series: Tiger·tec Gold Grade: WKP35G ISO designation: SDMT09T3ZDR-D57 WKP35G Facts Relief angle: 15° Insert size: 09 Plate thickness: T3 Tolerance class: M Shape: Square 90° Chipbreaker: D57 Special features Coated carbide, Tiger·tec Gold technology Material suitability: Steel (P) and Cast iron (K) Four cutting edges per insert (square geometry) Designed for stable chip formation and wear resistance Catalogue-geometry dependent main application FAQ Which materials is this insert suitable for? The SDMT09T3ZDR-D57 WKP35G insert from Walter Tools is designed for machining Steel (ISO group P) and Cast iron (ISO group K) as specified by the grade and chipbreaker geometry. What does the grade WKP35G signify? WKP35G denotes Walter’s coated-carbide grade within the Tiger·tec Gold technology, optimised for a balance of wear resistance and edge stability on common ferrous materials. How many cutting edges are available per insert? The square 90° geometry provides four cutting edges; combined with the T3 thickness and M tolerance class, this supports economical indexation and secure seating. What operations is this insert best used for? The insert is suited to semi-finishing and finishing milling passes where consistent surface quality and controlled chip formation are required in steel and cast iron components. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, brand‑new product from the manufacturer, Walter Tools.
SDMT09T3ZDR-D57 WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and a robust square geometry with 15° relief to secure stable, repeatable steel milling operations. Order the SDMT09T3ZDR-D57 WPP35G directly via Metav Werkzeuge or consult the team for application support. SDMT09T3ZDR-D57 WPP35G milling indexable insert — Tiger·tec Gold, for steel — Walter Tools The SDMT09T3ZDR-D57 WPP35G is a square 90° milling insert with a 15° relief angle, designed for productive roughing and medium finishing in steel using Walter Tools' Tiger·tec Gold coated carbide. Tiger·tec Gold coated grade WPP35G Optimised for machining steel (P) Square 90° geometry with 15° relief Chipbreaker D57 for stable chip control Increased process reliability through advanced coating The Tiger·tec Gold coating delivers enhanced wear resistance and consistent edge behaviour under the thermal and mechanical loads typical of steel machining. The WPP35G grade is a coated carbide formulation optimised for the P material group, balancing hardness and toughness to reduce flank wear and maintain cutting-edge stability. For production environments where repeatable tool life is essential, this combination reduces unexpected downtime and supports steady component quality by extending the interval between index changes. Robust geometry for heavy-duty and shoulder milling A Square 90° cutting geometry with 15° relief offers strong corner support and predictable cutting forces, which is beneficial for shoulder milling and interrupted cuts. The T3 thickness and the plate’s execution ensure good resistance to mechanical stress, while the D57 chipbreaker promotes controlled chip formation and evacuation. As an indexable insert, it provides economical edge renewal: multiple effective edges per insert lower tooling cost per part and simplify tool inventory management without compromising process security. Practical advantages for steel-focused workshops Designed for steel applications, the insert supports a wide range of production tasks from robust roughing to efficient semi-finishing. The Tiger·tec Gold technology contributes to improved surface finish and consistent dimensional results across runs, which is particularly valuable in batch production and job-shop scenarios. The Walter Tools engineering emphasis on stable chip formation and reliable cutting edges helps to lower rework rates and supports higher throughput, making the insert a practical choice where machining economy and repeatable quality are priorities. For tailored advice on integrating the SDMT09T3ZDR-D57 WPP35G into existing tooling systems or to confirm suitability for a specific steel grade, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for immediate application support and availability. Technical Data Article number: SDMT09T3ZDR-D57-WPP35G-WALTER SKU: SDMT09T3ZDR-D57-WPP35G-WALTER Designation: SDMT09T3ZDR-D57 WPP35G Manufacturer: Walter Tools Product type: milling indexable insert Series: Tiger·tec Gold Facts Relief angle: 15° Geometry: Square 90° Plate size: 09 Thickness: T3 Tolerance class: M Chipbreaker: D57 Special features Coating: Tiger·tec Gold Grade: WPP35G (coated carbide) Material suitability: steel (P) Execution: T Brand: Walter Tools FAQ Which materials is this insert best suited for? The SDMT09T3ZDR-D57 WPP35G is optimised for machining steel (ISO group P) and is formulated to manage the heat and chip characteristics typical of unalloyed and alloyed steels. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WPP35G grade improves wear resistance and edge stability, which supports longer effective tool life and consistent surface quality during extended milling cycles. How does the D57 chipbreaker influence performance? The D57 chipbreaker is designed for controlled chip formation and evacuation, enhancing process reliability and helping to prevent chip-related interruptions during medium to heavy milling operations. Why choose a square 90° insert with 15° relief for steel milling? A square 90° geometry offers strong corner support and is well suited to shoulder milling and robust strategies, while the 15° relief reduces rubbing and improves cutting engagement for stable metal removal in steel applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMT09T3ZDR-D57 WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and a D57 chipbreaker for stable chip formation and reliable milling performance; order the SDMT09T3ZDR-D57 WSP45G directly via Metav Werkzeuge or ask our consultants if needed. SDMT09T3ZDR-D57 WSP45G — Milling indexable insert, Tiger‑tec Gold, P/M/S application, Walter Tools The SDMT09T3ZDR-D57 WSP45G is a square 90° milling indexable insert with a Tiger‑tec Gold PVD coating, engineered for demanding milling of steel, rostfrei (stainless) steels and heat‑resistant alloys. Tiger‑tec Gold PVD coating Suitable for steel, stainless and superalloys Square 90° insert with 15° clearance D57 chipbreaker for secure chip control Consistent cutting performance under process conditions The combination of the Tiger‑tec Gold coating and the WSP45G grade delivers a balance of toughness and wear resistance that supports steady performance in milling operations. The coating technology enhances edge stability and reduces flank wear, which in turn maintains dimensional accuracy over longer tool life. The SDMT09T3ZDR-D57 WSP45G insert is optimised for interrupted and continuous cuts where reliable edge integrity and predictable wear behaviour are required, making it suitable for batch production and serial machining. Broad material versatility with controlled chip formation Designed for P/M/S applications, this cutting grade covers unalloyed and alloyed steel, rostfrei (stainless) steel and heat‑resistant superalloys or titaniferous materials. The D57 chipbreaker promotes stable chip control across varied workpiece materials, while the 15° clearance angle helps to reduce cutting forces and minimise rubbing on the flank face. Together, these features support secure chip evacuation and reduce the risk of built‑up edge, improving surface finish and process reliability. Economical machining through predictable tool life With a tolerance class M and a robust carbide substrate, the insert is engineered for repeatable indexing and steady tool life in production environments. The T3 thickness contributes to edge strength and resistance to fracture, reducing the frequency of tool changes and unplanned stoppages. These attributes lead to lower unit machining costs and higher uptime, so production planners can rely on stable performance and consistent components quality over time. Compact design that supports rigid setups and precise engagement The insert’s Square 90° geometry provides a rigid cutting edge orientation ideal for slotting and shoulder milling where axial stability matters. The size designation 09 makes it suitable for a wide range of milling cutters while maintaining compact engagement that limits vibration. As a Walter Tools product, the insert benefits from application‑oriented design and is compatible with standard toolholders that accept the SDMT form; the solid mount and defined chipbreaker ensure repeatable cutting behaviour in workshop and production settings. For reliable, productive milling with Walter Tools’ Tiger‑tec Gold inserts, contact Metav Werkzeuge for availability and application advice — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data Article number: SDMT09T3ZDR-D57-WSP45G-WALTER Label: Fräswendeschneidplatte SDMT09T3ZDR-D57 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series / grade: Tiger‑tec Gold / WSP45G ISO designation: SDMT09T3ZDR-D57 WSP45G Execution: T Numbers / Core Technical Data Size: 09 Thickness: T3 Free angle: 15° Chipbreaker: D57 Tolerance class: M Special features / Versions Coating: Tiger‑tec Gold (PVD) Grade: WSP45G (coated carbide) Insert shape: Square 90° Material suitability: P (steel), M (rostfrei / stainless steel), S (heat‑resistant alloys / titanium) Series name: Tiger‑tec Gold Manufacturer brand: Walter Tools FAQ What materials can be machined with this insert? The SDMT09T3ZDR-D57 WSP45G insert is suitable for steel (P), rostfrei (stainless) steel (M) and heat‑resistant superalloys or titanium (S) according to the grade’s design. How does the D57 chipbreaker affect machining? The D57 chipbreaker is designed to produce compact, controllable chips and to improve chip evacuation, which enhances surface finish and process stability when using this insert. What benefits does the Tiger‑tec Gold coating provide? Tiger‑tec Gold coating increases edge stability and wear resistance under thermal and mechanical loads, extending effective tool life and supporting consistent component quality. Is the insert suitable for interrupted cuts? Yes, the combination of the grade’s toughness and the insert geometry provides resilience in interrupted cutting conditions, offering reliable performance in such applications. Which insert geometry is used for shoulder milling and slotting? The square 90° geometry gives a rigid edge orientation ideal for shoulder milling and slotting operations where axial stability and edge strength are important. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The item offered is original, factory‑new goods from the manufacturer.
SDMT120408-D51 WKP25S WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Silver cutting-grade and the robust WKP25S geometry for reliable machining of steel and cast iron; the square 90° form with a 15° clearance angle ensures consistent chip control and repeatable results. Order directly via Metav Werkzeuge or contact our technical consultants for application-specific guidance. SDMT120408-D51 WKP25S – Indexable milling insert (square 90°, 15° clearance) — Walter Tools The SDMT120408-D51 WKP25S is a square indexable milling insert designed for productive finishing and semi-finishing of steel and cast iron, combining a coated carbide grade with a D51 chipbreaker for controlled chip formation. Tiger‑tec Silver coating technology Grade WKP25S for steel and cast iron 15° clearance angle for secure cutting Square 90° with 0.8 mm corner radius Consistent productivity through optimised cutting grade The combination of Tiger‑tec Silver coating and the WKP25S grade yields a balance between wear resistance and thermal stability that supports higher cutting parameters on a wide range of steels and cast iron. The coated carbide construction reduces abrasive wear and supports longer tool life, which in turn lowers downtime and contributes to more predictable machining cycles. For production environments where repeatability matters, this cutting grade translates directly into fewer insert changes and steadier output. Reliable geometry for chip control and surface quality The insert’s chipbreaker D51 geometry is developed to promote short, manageable chips in interrupted and continuous cuts, reducing the risk of tangling and tool rework. The square 90° shape provides four usable cutting corners, and the 0.8 mm corner radius helps to blend edge strength with surface finish requirements. For users less familiar with insert geometry: a chipbreaker channels the chip away from the cutting edge, while the corner radius distributes cutting forces to avoid premature edge failure. Practical benefits in a production setting With a 15° clearance angle, the insert reduces rubbing and heat build-up behind the cutting edge, improving consistency when machining typical carbon and alloy steels as well as cast iron. The design supports both ramping and shoulder milling operations where stability and surface integrity are required. These characteristics mean the insert is suitable for batch production as well as single-piece flow in mixed-shop environments, offering a pragmatic route to higher throughput without extensive process requalification. Selection and handling advice for longer tool life When selecting holders and cutters for this insert, match the insert pocket to the SDMT geometry and ensure correct clamp torque to avoid movement during cutting—this preserves the WKP25S edge and the coating performance. Light finishing passes with modest feed adjustments will prolong edge life, while conservative increases in cutting speed help exploit the coating’s thermal resilience. If in doubt about machining parameters for specific steel grades or cast iron types, Metav Werkzeuge’s technical team can advise on speeds, feeds and coolant strategy. For a tailored recommendation based on the Tiger‑tec Silver grade and the machining task at hand, contact Metav Werkzeuge for application support and fast availability. Technical data SKU: SDMT120408-D51-WKP25S-WALTER Designation: SDMT120408-D51 WKP25S Type: Indexable milling insert (milling insert) Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKP25S Core dimensions Plate size: 12 mm Thickness: 4 mm Corner radius: 0.8 mm Clearance angle: 15° Features & suitability Chipbreaker: D51 Shape: Square 90° Material suitability: P (steel) / K (cast iron) Tolerance class: M Execution code: T UID: SDMT120408-D51-WKP25S-WALTER FAQ What materials is this insert best suited for? This SDMT120408-D51 WKP25S insert is optimised for steel (P) and cast iron (K) applications owing to its coated carbide grade and chipbreaker geometry. How does the Tiger‑tec Silver coating benefit machining? The Tiger‑tec Silver coating improves thermal stability and wear resistance, enabling more consistent tool life and the option to run increased cutting speeds on suitable steels and cast irons. What does the D51 chipbreaker provide in daily use? The D51 chipbreaker promotes short, controllable chips, which simplifies chip evacuation and reduces rework due to chip entanglement in mixed or interrupted cuts. How many cutting edges are available per insert? The square 90° insert provides four usable cutting corners per indexable insert, offering efficient corner rotation for extended service life. Are there any special clamping recommendations? Ensure the insert pocket matches the SDMT geometry and apply correct clamp torque to guarantee stability; correct clamping preserves edge life and coating performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMT120408-D51 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance, stable chip control from the D51 chipbreaker and the robust square 90° geometry for predictable tool life and consistent surface quality; order direct or consult Metav Werkzeuge for application support. SDMT120408-D51 WKP35G – Milling indexable insert, Tiger‑tec Gold, square 90° (Walter Tools) The SDMT120408-D51 WKP35G is a square 90° milling insert designed for productive machining of steel and cast iron in serial and batch production environments Tiger‑tec Gold coating for long life Optimised for steel (P) and cast iron (K) Square 90° geometry with 15° relief Corner radius 0.8 mm for consistent edge Higher throughput through tailored grade and coating The combination of the WKP35G carbide grade with Tiger‑tec Gold coating delivers a balance of wear resistance and fracture toughness that benefits moderate to high cutting speeds. The grade is formulated for the thermal and mechanical loads typical when machining steel and cast iron, which makes it suitable for stable, repeatable runs. The coated surface reduces flank wear and helps maintain a predictable tool life, contributing directly to improved productivity and lower process variability in the workshop. Geometry engineered for reliability and surface quality A square 90° insert form with a 15° relief angle and 0.8 mm corner radius provides a strong cutting edge and reliable chip formation. The D51 chipbreaker promotes controlled chip segmentation on both unalloyed and alloyed steels as well as grey and ductile irons, reducing the risk of built-up edge and improving surface finish. These geometry choices support consistent part quality and reduce secondary operations, as edge strength and chip flow are optimised for typical milling conditions. Practical application and measurable benefits in production Designed as an indexable milling insert, the item fits standard cutter bodies for flexible tool set‑ups and fast index changes. The combination of grade and chipbreaker enables longer intervals between tool changes and predictable scheduling for replacement, which lowers downtime. The robust design and coating support mixed‑lot production where both steel and cast iron are machined, delivering economic advantages through extended life and steady cutting performance on series parts For technical consultation or to secure the SDMT120408-D51 WKP35G inserts from Walter Tools, contact Metav Werkzeuge for application advice and order support: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: SDMT120408-D51-WKP35G-WALTER Designation: SDMT120408-D51 WKP35G Series: Tiger‑tec Gold Grade: WKP35G Manufacturer: Walter Tools Product type: Milling indexable insert Facts Size: 12 Relief angle: 15° Corner radius: 0,8 mm Plate form: Square 90° Chipbreaker: D51 Plate thickness: 04 Tolerance class: M Special features Coating: Tiger‑tec Gold Material suitability: Steel (P) Material suitability: Cast iron (K) Execution: T Material designation: P / K FAQ What materials is this insert suitable for? The SDMT120408-D51 WKP35G insert is intended for machining steel (ISO group P) and cast iron (ISO group K), utilising the WKP35G grade and Tiger‑tec Gold coating for balanced wear resistance How does the D51 chipbreaker affect machining? The D51 chipbreaker on this insert promotes controlled chip segmentation and evacuation, improving surface finish and reducing the likelihood of built‑up edge when cutting steels and cast irons Is the geometry suitable for shoulder milling and general face milling? The square 90° geometry with a 15° relief and a 0.8 mm corner radius is designed for robust shoulder operations and general milling where edge strength and a reliable cutting angle are required Can this insert be indexed for quick tool changes? Yes, the insert is designed as an indexable milling insert compatible with standard cutter bodies, enabling rapid index changes and predictable tool replacement intervals Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
SDMT120408-D51 WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, precise 0.8 mm corner geometry, and a square 90° design for reliable, repeatable milling of Stahl components. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. SDMT120408-D51 WPP35G milling indexable insert for Stahl, Tiger·tec Gold – Walter Tools A robust SDMT120408-D51 WPP35G milling insert engineered for medium-to-heavy-duty milling of Stahl components, delivering stable chip control and extended tool life in production environments Tiger·tec Gold coating, high wear resistance Designed for Stahl machining Square 90° shape for stable cutting 15° relief angle, 0.8 mm corner radius High-performance grade for consistent material removal The WPP35G grade, based on Tiger·tec Gold coating technology, provides a balanced combination of hardness and toughness tailored to the thermal and chip-formation characteristics of Stahl. The coated carbide substrate promotes stable chip control and reduces flank wear, which translates into longer cutting edge life and fewer insert changes during batch runs. By choosing this grade, shops achieve higher process reliability and more consistent surface finish without sacrificing productivity. Geometry that supports precision and tool stability The insert’s square 90° format and 15° relief angle produce a predictable cutting engagement and a secure clamping interface, improving dimensional repeatability on prismatic and contour milling tasks. The 0.8 mm corner radius smooths the transition at the cutting edge to lower peak stresses while still allowing for efficient material removal; this reduces the risk of premature chipping and helps maintain part tolerances. Clear geometry benefits include reduced downtime for rework and fewer tool changes in continuous production. Practical advantages for workshop and production use With a design focused on machinability of Stahl (ISO group P), this insert suits a variety of milling operations from roughing to semi-finishing where a durable, general-purpose grade is required. The tolerance class M ensures consistent interchangeability, facilitating rapid re-indexing in multi-insert cutter systems. The combination of a coated carbide grade and robust chipbreaker geometry delivers a pragmatic balance between cutting speed, tool life and surface quality — a dependable choice for shops aiming to keep cycles efficient and predictable. Contact Metav Werkzeuge for tailored cutting data, availability and to place an order for the Walter Tools SDMT120408-D51 WPP35G insert with Tiger·tec Gold technology Technical data Article number: SDMT120408-D51-WPP35G-WALTER Label: Fräswendeschneidplatte SDMT120408-D51 WPP35G Walter Tools Product type: Fräswendeschneidplatte / milling indexable insert Manufacturer: Walter Tools ISO designation: SDMT120408-D51 WPP35G Core numerical data Relief angle: 15° Corner radius: 0.8 mm Insert size: 12 mm Plate thickness: 4 mm Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP35G (coated carbide) Chipbreaker: D51 Shape: Square 90° Material group: P (suitable for Stahl) Execution: T Base designation: SDMT120408-D51 FAQ What materials is this insert suitable for? The SDMT120408-D51 WPP35G milling insert by Walter Tools is designed for ISO group P, explicitly intended for machining Stahl such as unalloyed and alloyed steels. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating on the WPP35G grade increases wear resistance and improves thermal stability, which helps extend cutting-edge life and maintain consistent chip formation during longer cycles. Can this insert be used for finishing operations? Yes — the combination of a controlled chipbreaker and a 0.8 mm corner radius makes the insert suitable for semi-finishing and certain finishing passes where dimensional stability and surface quality are required. What does the D51 chipbreaker provide? The D51 chipbreaker is configured to promote predictable chip formation when machining Stahl, aiding evacuation and reducing the risk of built-up edge, which improves surface finish and process reliability. Is the geometry compatible with standard square milling cutters? The square 90° format and the stated tolerance class M ensure compatibility with common clamping systems for square inserts; confirm cutter seat compatibility with the cutter supplier before mounting. Walter Tools is a brand of Walter AG, part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanation only. There is no affiliation between our company and the named brands; the offered item is original, factory-new merchandise of the manufacturer.
SDMT120408-D51 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, versatile material compatibility and a secure chipbreaker geometry to maintain stable, repeatable milling cycles with reduced rework. Order the insert directly via Metav Werkzeuge or contact the consultants for application support. SDMT120408-D51 WSP45G — Milling indexable insert, Tiger·tec Gold, Walter Tools The SDMT120408-D51 WSP45G is a square 90° milling insert designed for versatile PVD-coated machining of Stahl, rostfreier Stahl and heat-resistant alloys in general milling applications Tiger·tec Gold PVD coating for long tool life Suited for Stahl, rostfreier Stahl and superalloys 15° clearance angle for secure chip formation Square 90° insert with 0.8 mm corner radius Consistent cutting performance across mixed materials The insert from the Tiger·tec Gold series delivers consistent cutting performance when machining mixed batches or varying component materials. The PVD-coated cutting grade WSP45G combines toughness and wear resistance, helping to avoid premature flank wear and edge breakdown. Designed for typical milling conditions, the geometry and coating support secure chip formation when processing Stahl and rostfreier Stahl, reducing the risk of built-up edge and keeping cycle times stable. Reliable surface quality and repeatable edge stability A square 90° shape with a 0.8 mm corner radius provides a predictable edge for profile work and general shoulder milling. The moderate corner radius balances strength and finish, enabling good surface quality with reduced need for secondary finishing. Tolerance class M ensures consistent seat and clamping accuracy, which contributes to repeatable results across tool changes and supports tighter production tolerances for batch manufacturing. Effective chip control that minimises interruptions The D51 chipbreaker geometry is calibrated to improve chip control in a range of feed and depth conditions, which lowers the incidence of machine stoppages due to poor chip evacuation. By promoting short, controllable chips and stable cutting forces, the insert supports higher process reliability when machining alloys classified under P, M and S. The result is fewer interruptions, less manual cleaning and a smoother production flow. Easy integration and clear material guidance The insert is supplied in the SDMT120408-D51 configuration and integrates with standard indexable milling holders designed for square 90° plates. Marked for material groups P / M / S, it is appropriate for general-purpose milling of Stahl, rostfreier Stahl and heat-resistant superalloys or titanium, offering a single-grade solution where operational flexibility is required. The balanced specification simplifies tooling decisions and streamlines inventory management. For application advice, availability and ordering of Walter Tools Tiger·tec Gold inserts contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for expert support and tailored recommendations Technical data SKU: SDMT120408-D51-WSP45G-WALTER Article designation: SDMT120408-D51 WSP45G Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Gold Numbers / Core technical data Insert size: 12 Plate thickness: 04 Clearance/relief angle: 15° Corner radius: 0.8 mm Plate form: Quadrat 90° Tolerance class: M Designation without grade: SDMT120408-D51 Special features / Materials / Coating Grade: WSP45G (PVD-coated hard metal) Chipbreaker: D51 Material groups: P / M / S Execution: T FAQ What materials is this insert suitable for? The SDMT120408-D51 WSP45G insert is rated for material groups P / M / S, meaning it is suitable for Stahl, rostfreier Stahl and heat-resistant superalloys including applications with titanium. How does the D51 chipbreaker affect machining? The D51 chipbreaker promotes secure chip formation and improved evacuation, enhancing process stability and reducing interruptions during milling with the WSP45G grade. What is the benefit of the 0.8 mm corner radius? A 0.8 mm corner radius provides a robust cutting edge that balances edge strength and surface finish, making the insert versatile for shoulder milling and general profiling. Is this insert part of a recognised series? Yes, the insert belongs to the Tiger·tec Gold series by Walter Tools, characterised by tough, PVD-coated grades designed for versatile milling. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMT120408-D57 WKK25G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating, a precise 15° clearance angle and a 0.8 mm corner radius for consistent, productive machining of cast iron; order the SDMT120408-D57 WKK25G indexable milling insert directly via Metav Werkzeuge or ask our consultants for tailored cutting data. SDMT120408-D57 WKK25G — Indexable milling insert, Tiger·tec Gold, for cast iron | Walter Tools The SDMT120408-D57 WKK25G is a square indexable milling insert engineered for high-productivity machining of cast iron, combining a wear-resistant coating with a chipbreaker designed for short, broken chips. Tiger·tec Gold coating for extended life Optimised for cast iron (ISO K) 15° clearance angle for secure cutting Square 90° form with 0.8 mm corner radius Maximise productivity when machining cast iron The Tiger·tec Gold coating delivers improved wear resistance and stability under the intermittent cutting typical of cast iron. This allows for longer tool life and fewer insert changes, which reduces downtime and increases throughput. The specified WKK25G grade is balanced for abrasive wear control and toughness, making it suitable for the frequent, short-chipping behaviour of cast iron. By selecting a coating and grade designed for this material class, firms achieve predictable performance and a lower total cost per component produced. Achieve consistent surface quality with secure cutting geometry A 15° clearance angle and the square 90° form of the insert provide reliable cutting engagement and predictable chip flow in milling operations. The integrated D57 chipbreaker supports controlled chip formation, reducing the risk of chip jamming and improving surface finishes. For operators and process planners, this translates into fewer interruptions for chip management and a more consistent dimensional result without complex fixture changes. Reduce process variability through stable tool life The insert’s combination of coated hardmetal substrate and the Tiger·tec Gold technology is designed for stable edge performance over extended cycles. Stable cutting edges lower the likelihood of sudden tool failure and contribute to reproducible machining rates. In production environments where repeatability is essential, the insert supports consistent cycle times and reduces the need for frequent tool qualification or corrective adjustments. Simple selection and integration into existing tool systems The SDMT120408-D57 geometry fits common indexable milling holder systems and is straightforward to map into existing tool lists. The clear identification of the WKK25G grade and the chipbreaker code helps maintenance teams and buyers choose the correct insert for cast iron tasks without extensive trial cuts. For shops aiming to streamline tooling inventories, the insert offers a balanced, general-purpose solution for a wide range of cast-iron milling applications. Contact Metav Werkzeuge for cutting parameters, integration advice and sample orders for the SDMT120408-D57 WKK25G indexable milling insert — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number / SKU: SDMT120408-D57-WKK25G-WALTER Label: Fräswendeschneidplatte SDMT120408-D57 WKK25G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WKK25G ISO designation: SDMT120408-D57 WKK25G Core measurements and codes Clearance angle: 15° Corner radius: 0.8 mm Plate size code: 12 Thickness code: 04 Tolerance class: M Designs and special features Coating: Tiger·tec Gold Chipbreaker: D57 Plate form: Square 90° Application: Optimised for cast iron (ISO K) Execution / style code: T FAQ What materials is this insert intended for? The SDMT120408-D57 WKK25G insert is designed and optimised for machining cast iron (ISO K) and is balanced to manage abrasive wear and short, breaking chips. What does the WKK25G grade mean for tool life? WKK25G denotes a Walter Tools coated hardmetal grade within the Tiger·tec Gold family; it is formulated to provide stable wear resistance and consistent performance in cast-iron applications. How does the D57 chipbreaker affect machining? The D57 chipbreaker on the SDMT120408-D57 supports controlled chip formation and evacuation, improving surface quality and reducing the chance of chip-related interruptions during milling. Is this insert compatible with standard square milling holders? Yes, the SDMT120408-D57 geometry and square 90° form are compatible with common indexable milling holders that accept this ISO-style insert format. Which production benefits can be expected from using this insert? Using the SDMT120408-D57 WKK25G typically results in longer tool life, fewer insert changes and more consistent cycle times when machining cast iron, supporting higher overall productivity. Manufacturer: Walter Tools; The Walter AG (brand: Walter Tools) with headquarters in Tübingen, Germany, is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners and are mentioned here for explanatory purposes only. There is no affiliation between our company and the brands referenced. The article offered is an original, factory-new product of the manufacturer.
SDMT120408-D57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a WKP25S carbide grade and a compact square geometry for consistent, economical milling of steel and cast iron; order directly via Metav Werkzeuge or consult our technical team for application-specific advice. SDMT120408-D57 WKP25S indexable milling insert — Tiger·tec Silver, 15° clearance (Walter Tools) SDMT120408-D57 WKP25S is an indexable milling insert designed for robust general milling of steel and cast iron, combining a coated carbide grade with a geometry tuned for reliable chip control and repeatable results. Tiger·tec Silver coating WKP25S coated carbide grade 15° clearance angle 0.8 mm corner radius For steel and cast iron Consistent performance with a premium coated grade The Tiger·tec Silver coating and WKP25S grade deliver a balanced combination of wear resistance and toughness that suits mixed-production environments. The coating reduces flank and crater wear under typical milling temperatures, which lengthens tool life and lowers the frequency of insert changes. As a result, production runs on steel and cast iron materials remain productive and predictable, with fewer unexpected interruptions. The designation SDMT120408-D57 signals the insert geometry and chipbreaker that together support controlled chip formation. Geometry that stabilises cutting and surface quality A 15° clearance angle and a 0.8 mm corner radius give this square (90°) insert good edge strength while still enabling acceptable surface finishes on general-purpose passes. The corner radius increases edge robustness for interrupted cuts and heavy engagement, whereas the clearance angle helps to avoid rubbing on the flank face and reduces heat transfer to the insert body. The square format and the specified insert size provide four usable cutting edges per indexable body, improving the overall cost efficiency of the milling system. Clear material application and machining benefits Marked for P (steel) and K (cast iron) applications according to ISO groupings, the insert is tailored to the thermal and abrasive challenges typical of these materials. The chipbreaker D57 assists in fragmenting chips to manageable lengths, enhancing process reliability and reducing the risk of chip entanglement. With a tolerance class M, the insert supports repeatable seating in the cutter body so that run-out and positional variance are minimised, contributing to stable dimensional results and less rework. Practical advantages for workshop integration Using this indexable insert reduces setup complexity: inserts are mounted in standard square-pocket milling bodies, enabling quick indexing and fast replacement compared with solid tools. The compact plate thickness and standard form factor simplify inventory management and permit economic stocking across diverse jobs. Combined with the protective Tiger·tec Silver coating and the WKP25S grade, the system offers a pragmatic route to improved uptime and predictable tool consumption. Contact Metav Werkzeuge for tailored recommendations on cutter bodies, cutting parameters and grading choices for specific steel or cast iron alloys, and obtain professional application support from our consultants. Technical data Article number: SDMT120408-D57-WKP25S-WALTER SKU: SDMT120408-D57-WKP25S-WALTER Product type: Indexable milling insert Designation: SDMT120408-D57 WKP25S Series/grade: Tiger·tec Silver / WKP25S Manufacturer: Walter Tools Facts Shape: Square 90° Size: 12 (designation) Thickness: 04 Corner radius: 0.8 mm Clearance angle: 15° Chipbreaker: D57 Tolerance class: M Special features Coating: Tiger·tec Silver Carbide type: Coated cemented carbide (WKP25S) Material application: Steel (P); Cast iron (K) Geometry suited to general-purpose milling and interrupted cuts FAQ What materials is this insert suitable for? This insert is specified for steel (P) and cast iron (K) machining; the WKP25S grade and Tiger·tec Silver coating are optimised for those ISO groups. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength for heavier cuts and interrupted milling, improving resistance to edge chipping while maintaining acceptable surface quality. Can this insert be indexed to use all cutting edges? Yes. The square 90° form provides four usable edges per insert; correct seating according to the tolerance class M ensures repeatable alignment in the cutter body. What role does the chipbreaker D57 play? The D57 chipbreaker promotes short, controlled chips on mixed steel and cast iron operations, aiding chip evacuation and reducing risks of entanglement. Is this insert compatible with standard cutter bodies? The SDMT geometry and dimensions align with widely used square-pocket milling bodies; verify compatibility with the chosen cutter's clamping and seat geometry before ordering. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered marks are referenced exclusively for explanation and identification of compatibility or origin; there is no affiliation between our company and the mentioned manufacturers. The offered item is an original, factory-new product from the stated manufacturer.
SDMT120408-D57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold grade WKP35G and the D57 chipbreaker for stable chip control and productive milling of steel and cast iron; order directly via Metav Werkzeuge or contact our consultants for material-specific recommendations. Fräswendeschneidplatte SDMT120408-D57 WKP35G — Milling insert for steel and cast iron (Walter Tools) A SDMT120408-D57 WKP35G milling insert engineered for high‑productivity machining of steel and cast iron, featuring the Tiger‑tec Gold coated grade for extended tool life and consistent results. Tiger‑tec Gold coated grade WKP35G D57 chipbreaker for stable chip control Square 90° insert with 0.8 mm corner radius Suitable for steel and cast iron machining Maximise throughput with a high‑performance cutting grade The coated carbide WKP35G grade within the Tiger‑tec Gold series is formulated for consistent performance when machining steel and cast iron, delivering a reliable balance between wear resistance and toughness. This results in reduced tool changes and stable cutting edges under typical milling temperatures, which directly supports higher machine utilisation and lower unit costs. The D57 chipbreaker is designed to shape chips predictably, improving evacuation and reducing the risk of recutting; the outcome is a smoother process window and fewer surface defects on workpieces. Precision geometry that supports repeatable quality With a square 90° plate form and a 0.8 mm corner radius, the geometry promotes a clear, defined cutting edge suited to medium‑duty finishing and semi‑finishing operations. The 15° relief angle contributes to effective cutting engagement while controlling contact stresses, which helps maintain dimensional accuracy over long runs. These geometrical choices, combined with the tolerance class M, provide predictable behaviour in multi‑pass operations and simplify toolpath planning for CNC milling systems, enabling consistent part quality and reduced inspection effort. Robust chip control and operational reliability for demanding shops The combination of Tiger‑tec Gold coating and the D57 chipbreaker supports stable chip formation across a range of steel grades and cast irons, reducing downtime associated with chip handling and tool wear. The insert’s thickness code 04 and compact 12 size suit modern cutter bodies that require reliable seating and minimal runout sensitivity. For manufacturing environments that demand process security and constant output, this insert offers a pragmatic balance of productivity and predictable life, making it a suitable choice for job shops and production lines alike. The SDMT120408‑D57 WKP35G demonstrates the advantages of coating technology paired with optimized geometry for everyday machining challenges. Contact Metav Werkzeuge for application advice and to discuss the optimal Walter Tools SDMT120408‑D57 WKP35G configuration for specific steel or cast‑iron components Technical data SKU: SDMT120408‑D57‑WKP35G‑WALTER Designation: SDMT120408‑D57 WKP35G Product type: Fräswendeschneidplatte / milling insert Series: Tiger‑tec Gold Core dimensions Insert size: 12 Thickness code: 04 Corner radius: 0.8 mm Relief angle: 15° Shape: Square 90° Tolerance class: M Materials & special features Grade: WKP35G (coated carbide) Chipbreaker: D57 Material suitability: P (steel), K (cast iron) Execution: T Series description: Tiger‑tec Gold — wear resistant coating technology FAQ What materials is this insert suitable for? The SDMT120408‑D57 WKP35G insert is designed for machining steel (ISO group P) and cast iron (ISO group K), utilising the Tiger‑tec Gold coated WKP35G grade for balanced wear resistance and toughness. How does the D57 chipbreaker affect machining? The D57 chipbreaker provides controlled chip formation and evacuation, improving process stability and reducing the likelihood of entangled chips when milling steel and cast iron with this Walter Tools insert. What are the key geometry features that influence tool life? The square 90° form, 0.8 mm corner radius and 15° relief angle combine to deliver a stable cutting edge, predictable wear progression and compatibility with standard cutter bodies for repeatable tool life. Can this insert be used for finishing operations? Yes. With its 0.8 mm corner radius and coated WKP35G grade, the insert is suitable for semi‑finishing and finishing passes where a combination of surface quality and tool life is required. Is this a coated or uncoated insert? The insert is supplied in the Tiger‑tec Gold series with the WKP35G coated carbide grade for enhanced wear resistance and process reliability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory‑new goods from the manufacturer.
SDMT120408-D57 WPP35G WPP35G Wendeplatten - Walter Tools
High-performance milling with proven wear resistance: the coated WPP35G grade and Tiger·tec Gold technology deliver extended tool life and consistent chip formation for steel machining. The square 90° geometry with a 15° clearance angle ensures stable cutting and reliable surface finish. Order directly via Metav Werkzeuge or contact our consultants for tailored application advice. SDMT120408-D57 WPP35G — milling indexable insert, Tiger·tec Gold, Walter Tools The SDMT120408-D57 WPP35G is a square 90° milling insert engineered for efficient steel machining, combining a wear-resistant coated grade with a chipbreaker optimised for stable cutting. Tiger·tec Gold coating Optimised for steel (ISO group P) Square 90° insert geometry 15° clearance angle for stable cutting Increase throughput with a coating designed for milling The combination of the Tiger·tec Gold coating and the WPP35G carbide grade targets higher machining speeds and longer tool life, reducing downtime for insert changes. The coating technology stabilises the cutting edge against adhesion and thermal wear, which converts into fewer interruptions and a more predictable production rhythm. The design with a 15° clearance angle and a modest corner radius provides a balance between robustness and edge sharpness, so cycle times can be optimised while maintaining surface integrity on typical steels. Consistent chip control for fewer reworks Built around the D57 chipbreaker, the geometry promotes repeatable chip control and reliable swarf evacuation under the thermal and mechanical conditions of steel machining. Better chip formation reduces the risk of edge build-up and improves surface finish, lowering the need for secondary operations. The square 90° shape contributes to stable tool positioning and even wear, which helps achieve consistent part tolerances across runs and increases process reliability on mixed-series production. Simple selection and predictable performance in production Specified with tolerance class M and a compact 12 mm inscribed circle, the insert fits common cutter bodies and is suitable for a wide range of medium-duty milling tasks in the P material group. The combination of WPP35G and the Tiger·tec Gold series supports a broad spectrum of steels with an emphasis on balanced wear resistance and toughness. For workshops seeking a dependable, ready-to-fit solution, this insert offers straightforward integration and reproducible results in component machining. Contact Metav Werkzeuge for an application check and order support — Metav Werkzeuge provides technical guidance and local availability to ensure the insert matches the intended machining scenario (info@metav-werkzeuge.com • +49 2822 7131930) Technical Data SKU: SDMT120408-D57-WPP35G-WALTER Article: SDMT120408-D57 WPP35G Manufacturer: Walter Tools Product type: milling indexable insert Series: Tiger-tec Gold Core specifications Free angle: 15° Corner radius: 0.8 mm Inscribed circle: 12 mm Thickness: 4 mm Tolerance class: M Features & Applications Coating: Tiger·tec Gold Grade / sort: WPP35G Chipbreaker: D57 Shape: Square 90° Suitable for: Steel (ISO group P) Execution: T Plate designation without grade: SDMT120408-D57 FAQ What materials is this insert suitable for? The SDMT120408-D57 WPP35G insert is designed for machining steels (ISO group P) and offers a balanced combination of wear resistance and toughness for general steel applications. How does the Tiger·tec Gold coating benefit milling operations? Tiger·tec Gold on the SDMT120408-D57 WPP35G improves thermal and adhesive wear resistance, leading to longer tool life and more consistent edge retention in steel machining. What effect does the 0.8 mm corner radius have on performance? A 0.8 mm corner radius enhances edge strength and reduces the risk of chipping during interrupted cuts, while still enabling acceptable surface quality for most finishing operations. Is the insert compatible with standard cutter bodies? Yes; the 12 mm inscribed circle and 4 mm thickness conform to common cutter body interfaces for this insert family, making the SDMT120408-D57 WPP35G straightforward to fit. Which chipbreaker is integrated and what advantage does it offer? The D57 chipbreaker promotes controlled chip formation and evacuation, decreasing the likelihood of built-up edge and improving consistency across workpieces. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking. Protected trademarks and brand names are the property of their respective owners. Where applicable, brand names are mentioned for clarification; there is no affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the manufacturer.
SDMT120408-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of a high‑performance Tiger·tec Gold grade and the D57 chipbreaker to maintain stable cutting edges in demanding materials; the combination of reliable chip control and a 0.8 mm corner radius supports consistent productivity. Order genuine Walter Tools inserts directly via Metav Werkzeuge or consult our technical team for selection advice. SDMT120408-D57 WSM35G milling indexable insert by Walter Tools — Tiger·tec Gold grade, for stainless steels and superalloys SDMT120408‑D57 WSM35G is a square milling insert designed for high thermal and mechanical loads, suited to machining stainless steels and heat‑resistant superalloys and titanium in demanding production environments Tiger·tec Gold grade WSM35G Optimised D57 chipbreaker 15° free angle for secure cutting Square 90° form with 0.8 mm radius Enhanced performance where heat and toughness are critical The Tiger·tec Gold coating and the WSM35G carbide grade combine a wear‑resistant, coated carbide substrate with advanced surface treatments to resist abrasion and maintain edge stability during high temperatures. For materials that form tough, glued‑on chips—particularly stainless steel and heat‑resistant superalloys—the coated grade promotes reliable chip formation and reduces the risk of built‑up edge. This leads to longer effective tool life and fewer unplanned tool changes, supporting measurable gains in process efficiency and cost per component. Geometry engineered for chip control and surface quality The integral D57 chipbreaker is tailored to break and evacuate swarf consistently under the typical cutting conditions for these alloys; that results in controlled chip flow and reduces the chance of re‑cutting or surface damage. The 15° free angle and square 90° form deliver axial and radial stability when milling, while the 0.8 mm corner radius helps achieve a robust cutting edge that balances strength and finish. In practical terms, this geometry enables steadier feeds and feeds into finishing passes with improved surface integrity. Practical integration into production and application guidance As a modular, indexable solution, the insert fits common milling pocket systems with thickness code 04 and size designation 12, offering repeatable seating and replacement without complex setup. The tolerance class M indicates manufacturing precision suited for stable mounting and predictable performance across tool changes. For workshop planning, this translates to reproducible cycle times and easier tool inventory management. Where material lists include both stainless steels and nickel‑based or titanium alloys, selecting a coated WSM35G insert supports a single‑grade strategy that simplifies procurement while maintaining quality. For technical selection and to obtain genuine Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored advice and rapid supply — Metav Werkzeuge will assist with grade selection, application parameters and logistics Technical data SKU: SDMT120408-D57-WSM35G-WALTER Name: SDMT120408-D57 WSM35G Manufacturer: Walter Tools Key figures Free angle: 15° Corner radius: 0.8 mm Plate form: Square 90° Size: 12 Thickness code: 04 Tolerance class: M Materials & features Series: Tiger·tec Gold Grade: WSM35G (coated carbide) Chipbreaker: D57 Suitable for: stainless steel (M) and heat‑resistant superalloys/titanium (S) Application focus: heavy‑duty milling and demanding materials FAQ What materials is this insert suitable for? The SDMT120408‑D57 WSM35G insert by Walter Tools is optimised for stainless steels and heat‑resistant superalloys/titanium, reflecting the grade’s focus on thermal and edge stability. How does the D57 chipbreaker affect machining? The D57 chipbreaker provides consistent chip segmentation and evacuation, improving surface finish and reducing the risk of built‑up edge when milling tough or gummy materials. What does the tolerance class M mean for mounting? Tolerance class M denotes a manufacturing precision that helps ensure reliable seating in the tool holder and consistent repeatability during insert changes. Can this insert be used for finishing passes? Yes — the combination of a 0.8 mm corner radius and the coated WSM35G grade supports both robust roughing and controlled finishing, depending on feed and depth‑of‑cut settings. Is this a genuine Walter Tools product? The SDMT120408‑D57 WSM35G is offered as an original Walter Tools indexable insert and is supplied through authorised distribution channels. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMT120408-D57 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, stable D57 chip control and a compact 15° clearance geometry to maintain consistent productivity across steel, stainless steel and heat-resistant alloys; order the insert directly via Metav Werkzeuge or consult the team for application advice. SDMT120408-D57 WSP45G milling insert — Tiger·tec Gold, for steel, stainless steel and superalloys — Walter Tools A SDMT120408-D57 WSP45G milling insert engineered for reliable milling of steels, stainless steels and high-temperature superalloys with optimised chip control and robust edge stability Tiger·tec Gold PVD coating Optimised D57 chipbreaker 15° clearance angle for stable cutting 0.8 mm corner radius, square 90° Longer tool life through advanced coating and grade selection The combination of the Tiger·tec Gold coating with the WSP45G cutting grade results in a PVD-coated carbide that balances wear resistance and edge toughness. This pairing reduces flank wear and supports consistent tool life when machining demanding materials. The coated substrate helps to manage the temperatures that typically arise in steel and stainless steel operations, so cycle times remain predictable and surface quality is preserved. For manufacturers seeking fewer tool changes per shift, this insert provides a technical route to lower downtime and improved throughput. Consistent chip control and surface quality from geometry The insert's D57 chipbreaker and 15° clearance geometry are intended to create predictable chip formation and reduced re-cutting. The square 90° shape with a 0.8 mm corner radius delivers a balance between strength at the cutting edge and the capability to produce acceptable surface finishes; a larger radius supports robustness during heavier engagement, while the chipbreaker guides swarf away from the cutting zone. These geometric choices translate into steadier process behaviour, especially where interrupted cuts or varying depths of cut would otherwise destabilise the machining operation. Broad applicability across common and specialised materials Designed for the ISO material groups P, M and S, this grade addresses conventional steels, stainless steel and heat-resistant superalloys or titanium alike. The grade philosophy prioritises a compromise between toughness and thermal wear resistance so that the single insert can be deployed across mixed production runs. For workshops handling mixed batches, the versatility reduces tool inventory complexity while maintaining process reliability when facing materials that differ in thermal conductivity and work-hardening tendencies. Integration into production and handling benefits The insert is provided in the standard SDMT size with tolerance class M and plate thickness designation 04, enabling straightforward integration into commonly used milling holders. The square 90° form provides simple indexing options to use multiple edges before replacement, supporting cost-effective utilisation in batch and single-part production. The concise specification and familiar geometry allow operators and CAM programmers to adopt the insert without extensive redesign of toolholders, which aids faster shop-floor introduction and predictable performance in serial machining. Contact Metav Werkzeuge to discuss the best Walter Tools Tiger·tec Gold WSP45G insert for the intended material mix and cutting conditions — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: SDMT120408-D57-WSP45G-WALTER Name: SDMT120408-D57 WSP45G Manufacturer: Walter Tools Series: Tiger-tec Gold Type: milling insert Facts Size: 12 Clearance angle: 15° Corner radius: 0.8 mm Plate thickness designation: 04 Form: square 90° Tolerance class: M Special features Coating: Tiger·tec Gold (PVD) Grade: WSP45G (coated carbide) Chipbreaker: D57 Applicable materials: P (steel), M (stainless steel), S (superalloys / titanium) Execution: T FAQ What materials is this insert suitable for? The SDMT120408-D57 WSP45G insert is specified for ISO groups P, M and S, making it suitable for steel, stainless steel and heat-resistant superalloys including titanium alloys. How does the D57 chipbreaker influence machining? The D57 chipbreaker on this Walter Tools insert promotes controlled chip formation and evacuation, reducing the risk of built-up edge and improving process stability during interrupted or continuous milling. What does the 15° clearance angle mean for cutting performance? A 15° clearance angle provides a compromise between edge strength and cutting action; on this insert it contributes to stable cutting forces and helps maintain a secure cutting edge under thermal load. Is the square 90° form advantageous for indexing? Yes, the square 90° geometry allows the insert to be indexed to multiple cutting edges, enabling economical use of each insert before disposal or regrinding. What is the benefit of the Tiger·tec Gold coating on this grade? The Tiger·tec Gold PVD coating enhances thermal and abrasive wear resistance while preserving edge toughness, which supports longer tool life and consistent surface quality across mixed materials. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMT120408-F57 WAK15 Wendeplatten - Walter Tools
Benefit from the combination of sharp WAK15 grade geometry, effective F57 chip control and a sturdy 0.8 mm corner radius to improve aluminium machining efficiency and process reliability; order the SDMT120408-F57 WAK15 insert directly via Metav Werkzeuge or consult the sales team for application advice. SDMT120408-F57 WAK15 milling indexable insert (square 90°, 15° free angle) – Walter Tools The SDMT120408-F57 WAK15 is a square milling insert designed for high-performance cutting of aluminium and other non‑ferrous metals, optimised for stable chip formation and long tool life in production milling. Square 90° geometry for precise milling 15° free angle for reduced rubbing Corner radius 0.8 mm for robust edge Chipbreaker F57 prevents material build-up Faster, cleaner aluminium machining with targeted grade design The WAK15 grade is an uncoated cemented carbide developed for non‑ferrous materials, notably aluminium, where sharp cutting edges and low adhesion are crucial. The insert’s geometry and the F57 chipbreaker promote effective chip control, reducing the risk of built‑up edge and minimising interruptions. For production environments aiming to maintain higher feed rates, this combination leads to improved surface finish and fewer tool changes, which enhances throughput without compromising dimensional accuracy. Stable cutting edges for consistent production performance A corner radius of 0.8 mm and a square 90° form provide mechanical support at the cutting edge, translating into repeatable cutting behaviour and predictable wear patterns. The 15° free angle reduces flank contact and friction, which helps to maintain edge integrity when machining softer, gummy alloys. These geometric choices lower the incidence of edge deformation and make the insert suitable for slotting and face milling operations where edge stability is required for consistent part quality. Simple specification and integration into machining cycles The insert is supplied in the well‑established Walter N‑series and carries the designation SDMT120408‑F57 WAK15, allowing straightforward selection for existing toolholders that accept square inserts. The size code 12 and thickness code 04 match common indexable systems, while the tolerance class M ensures compatibility with typical clamping and seating conditions. With its focus on chip formation and minimal adhesion, the component reduces cleaning intervals and supports continuous operation, contributing to lower overall cycle costs in aluminium processing. Contact Metav Werkzeuge for tailored recommendations on Walter Tools SDMT120408-F57 WAK15 inserts and to confirm suitability for specific aluminium alloys—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: SDMT120408-F57-WAK15-WALTER Name: SDMT120408-F57 WAK15 Product type: Milling indexable insert Brand: Walter Tools Grade: WAK15 Series: Walter N‑Sortensystem Facts Insert shape: Square 90° Free angle: 15° Corner radius: 0.8 mm Size code: 12 Thickness code: 04 Chipbreaker: F57 Tolerance class: M Applications & features Material application: Aluminium / non‑ferrous metals Material of insert: uncoated cemented carbide Execution: T Series description: WAK15 suited for aluminium and NE‑metals FAQ What materials is this insert suitable for? The SDMT120408‑F57 WAK15 insert from Walter Tools is optimised for aluminium and other non‑ferrous metals, as indicated by the WAK15 grade and the insert’s chip control geometry. How does the F57 chipbreaker benefit machining? The F57 chipbreaker promotes controlled chip segmentation and reduced material adhesion, which improves surface finish and lowers the likelihood of built‑up edge when machining soft, sticky alloys. Why select the WAK15 grade for aluminium work? WAK15 is an uncoated cemented carbide grade developed for non‑ferrous applications; it provides sharp, wear‑resistant cutting edges and reliable performance in continuous milling of aluminium components. What do the geometry codes mean for process stability? The square 90° shape and 0.8 mm corner radius give mechanical support and repeatable cutting behaviour, while the 15° free angle reduces flank contact to help preserve edge life during milling. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group and a leading provider of precision cutting tools. Protected trademarks and trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
SDMT120408-F57 WKP25S Wendeplatten - Walter Tools
Take advantage of the coated carbide grade and the proven chipcontrol geometry to increase productivity and surface quality while reducing tool change intervals. Order the inserts via Metav Werkzeuge or consult our technical team for application-specific recommendations. SDMT120408-F57 WKP25S indexable milling insert — Tiger‑tec Silver, for Steel and Cast iron (Walter Tools) SDMT120408-F57 WKP25S is an indexable milling insert designed for medium to high‑productivity operations in steel and cast iron machining. *Coated Tiger‑tec Silver grade WKP25S *Chipbreaker F57 for controlled chip formation *Square 90° shape with 15° clearance angle *Corner radius 0.8 mm for balanced strength and finish Increase throughput with a wear‑resistant, coated grade The coated carbide composition of the Tiger‑tec Silver grade WKP25S offers a durable cutting edge tailored for the thermal and abrasive conditions of machining steel and cast iron. The combination of a modern coating system and a stable substrate results in consistently low flank wear and longer tool life, which directly contributes to fewer tool changes and higher machine uptime. Users will benefit from improved process stability during both roughing and semi‑finishing operations, with predictable tool performance under increased cutting speeds and depths. Predictable geometry for consistent part quality A square 90° shape combined with a 15° clearance angle and a corner radius of 0.8 mm ensures reliable engagement and repeatable results across batches. The controlled geometry reduces vibration and supports a steady tool‑workpiece interface, improving surface finish and dimensional accuracy. Tolerance class M supports reproducible seating in standard cutters, which simplifies tool presetting and reduces variability between inserts. Efficient chip control and reduced cycle times The F57 chipbreaker is engineered to produce short, manageable chips when machining the defined material groups, helping to prevent entanglement and improve evacuation in slotting and peripheral milling. Better chip control lowers the risk of workpiece damage and tool interruptions, enabling tighter cycle planning and, consequently, a more economical production rhythm. The insert’s balanced design supports stable cutting forces, which in turn permits higher feed rates without sacrificing surface quality. Application spectrum and process recommendations Designed for ISO group P / K, this insert is suitable for unalloyed and alloyed steel as well as cast iron applications as indicated in the technical grade description. The coated grade is optimised for a broad workpiece material range and common milling tasks; it performs well in both continuous and interrupted cuts. For best results, pair the insert with a rigid cutter body and an appropriate coolant strategy or MQL setup to extend life and maintain surface integrity. Discuss the machining requirements for your application with Metav Werkzeuge and secure the SDMT120408‑F57 WKP25S inserts from Walter Tools — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SDMT120408-F57-WKP25S-WALTER Name: Fräswendeschneidplatte SDMT120408-F57 WKP25S Walter Tools Series: Tiger‑tec Silver Grade: WKP25S Brand: Walter Tools Facts Shape: Square 90° Clearance angle: 15° Corner radius: 0.8 mm Size: 12 mm Thickness code: 04 Chipbreaker: F57 Tolerance class: M Special features Coating: Tiger‑tec Silver (coated carbide) Material suitability: Steel (P), Cast iron (K) Execution: T Insert designation: SDMT120408-F57 WKP25S Indexable milling insert for medium to high productivity FAQ What materials is this insert suitable for? The SDMT120408‑F57 WKP25S insert from Walter Tools is rated for ISO groups P and K, i.e. steel and cast iron, making it suitable for a wide range of turning and milling tasks on those materials. Which chipbreaker is fitted and what is its benefit? The insert features the F57 chipbreaker, designed to produce short, controlled chips in steel and cast iron machining, which improves evacuation and reduces the risk of rework due to chip interference. How does the Tiger‑tec Silver coating improve performance? Tiger‑tec Silver is a multi‑layer coating system on a carbide substrate that increases wear resistance and thermal stability, helping the WKP25S grade to maintain a sharper cutting edge for longer and to support higher cutting speeds. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and brand names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the named manufacturers. The offered item is original, factory‑new merchandise of the manufacturer.
SDMT120408-F57 WKP35G WKP35G Wendeplatten - Walter Tools
High process stability and the Tiger·tec Gold coating provide extended tool life and consistent chip control for demanding steel and cast-iron milling. The combination of WKP35G grade and a defined F57 chipbreaker enables reliable, productive machining; order the inserts via Metav Werkzeuge or consult our specialists for tailored cutting data. SDMT120408-F57 WKP35G milling indexable insert — Tiger·tec Gold, Walter Tools SDMT120408-F57 WKP35G is a square 90° indexable milling insert developed for productive machining of steel and cast iron, combining a robust coated-carbide grade with a chipbreaker tuned for controlled chips Tiger·tec Gold coating for extended tool life WKP35G coated carbide grade for robust edge Suitable for steel and cast iron machining Square 90° form with 0.8 mm corner radius Consistent performance through advanced coating and grade The insert is built around the Tiger·tec Gold technology and the WKP35G coated-carbide grade, a pairing engineered for wear resistance and stable edge life in cyclic and continuous milling. Coating layers reduce flank and crater wear, which results in fewer tool changes and longer uninterrupted runs; this translates into measurably higher process reliability in both series production and job-shop environments. According to ISO classification, the grade addresses the thermal and chip-formation characteristics typical of steel and cast iron, helping to maintain dimensional stability under varying cutting conditions. Geometry that supports productivity and surface quality Designed in a square 90° format with a 15° clearance angle and a 0.8 mm corner radius, the geometry balances edge strength and accessibility for general milling tasks. The defined F57 chipbreaker promotes short, controllable chips in heavy interrupted cuts and common finishing passes, reducing the risk of built-up edge and improving surface integrity. The tolerance class M ensures interchangeability and predictable fit in standard tool holders compatible with the SDMT120408-F57 designation, simplifying tool management and replacement procedures on the shop floor. Practical advantages for machining shops and toolrooms With a compact thickness and standardised form, this insert supports efficient tool indexing and inventory management while delivering repeatable results across batches. The coated carbide composition and chip control features lower overall machining costs by extending cutting-edge life and reducing scrap from poor chip evacuation. For customers seeking reliable performance from a recognised supplier, the Walter Tools series offers stable cutting behaviour and easy integration into established milling processes — a pragmatic choice for mixed-material production involving steel and cast iron. Contact Metav Werkzeuge for application-specific cutting data and to secure Walter Tools Tiger·tec Gold inserts for demanding steel and cast-iron milling Technical data SKU: SDMT120408-F57-WKP35G-WALTER ISO designation: SDMT120408-F57 WKP35G Product type: Milling indexable insert Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WKP35G Execution: T Chipbreaker: F57 Facts Size: 12 mm Thickness: 4 mm Corner radius: 0.8 mm Clearance angle: 15° Shape: Square 90° Tolerance class: M Special features Coating/series: Tiger·tec Gold Carbide grade: WKP35G (coated carbide) Suitable for: Steel (P) and Cast iron (K) Material designation: P / K Chip control: F57 Product designation without grade: SDMT120408-F57 FAQ Which materials can be machined with this insert? The SDMT120408-F57 WKP35G milling indexable insert (Walter Tools) is specified for ISO material groups P and K, meaning it is suitable for a wide range of steel grades and for cast iron applications. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating on the WKP35G grade enhances wear resistance and thermal stability, which extends cutting-edge life and improves consistency under higher cutting temperatures. What is the benefit of the F57 chipbreaker and 0.8 mm corner radius? The F57 chipbreaker produces short, manageable chips for interrupted and continuous milling, while the 0.8 mm corner radius increases edge robustness and reduces the likelihood of chipping during heavy cuts. Is the insert compatible with standard SDMT holders? Holders and tool systems that accept the SDMT120408-F57 designation will accommodate this insert; the tolerance class M supports predictable fit and repeatable clamping. For which machining tasks is this geometry particularly suitable? The square 90° form with a 15° clearance angle is versatile for a range of operations, from roughing to general finishing, offering a good compromise between strength and surface access. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanation and identification. There is no affiliation or partnership between Metav Werkzeuge and the named brands; the offered article is an original, factory-new product of the manufacturer Walter Tools.
SDMT120408-F57 WPP35G Wendeplatten - Walter Tools
Benefit from the combination of high wear resistance, consistent chip control and proven steel performance for dependable milling results — order the SDMT120408-F57 WPP35G directly via Metav Werkzeuge or consult our experts for application-specific advice. SDMT120408-F57 WPP35G milling insert (Tiger·tec Gold, 15° relief) — Walter Tools SDMT120408-F57 WPP35G is a square 90° milling insert engineered for steel machining, featuring a Tiger·tec Gold coated carbide grade and a 0.8 mm corner radius for robust edge performance. Tiger·tec Gold coated for high wear resistance Optimised chipbreaker F57 for controlled chips 15° relief angle for stable cutting performance Square 90° form with 0.8 mm corner radius Consistent performance for steel machining The combination of the WPP35G grade and the Tiger·tec Gold coating delivers a balance of wear resistance and toughness tailored for P‑group materials (steel). Designed to cope with the heat and chip forms typical of steel turning and milling, this coated carbide insert ensures longer tool life under productive cutting conditions. The result is fewer tool changes, predictable wear behaviour and improved process reliability in series production. Controlled chip formation and surface quality The integrated F57 chipbreaker is optimised for chip control during steel machining, reducing rework and minimising downtime caused by irregular chips. By managing chip flow and fragmentation, the geometry supports stable cutting forces and contributes to consistent surface finish. For applications where repeated dimensional accuracy matters, the chipforming design reduces the risk of built-up edge and supports repeatable part quality. Geometry that stabilises heavy cuts The square 90° form combined with a 0.8 mm corner radius and a 15° relief angle provides a stable cutting edge that withstands intermittent loads and supports higher feed rates. The compact size 12 format lends itself to a range of milling bodies that accept SDMT-style inserts, offering rigidity in the clamped position and enabling efficient material removal with reliable edge strength. Practical advantages in production environments With a tolerance class M and the proven material pairing of coated carbide, the insert is suitable for general and demanding steel applications where a mix of economy and process security is required. The grade’s balance—leaning toward wear resistance while retaining enough toughness—allows for productive cutting windows and reduces scrap risk. For shops aiming to increase throughput without sacrificing component integrity, this insert provides a dependable compromise between life and performance. Contact Metav Werkzeuge for tailored machining recommendations on Walter Tools Tiger·tec Gold inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: SDMT120408-F57-WPP35G-WALTER Designation: SDMT120408-F57 WPP35G Brand: Walter Tools Series: Tiger-tec Gold Relief angle: 15° Corner radius: 0.8 mm Size: 12 Thickness: 04 Tolerance class: M Grade: WPP35G Coating: Tiger·tec Gold (coated carbide) Chipbreaker: F57 Shape: Square 90° Application group: Steel (P) Execution: T FAQ Is this insert suitable for machining standard steels? Yes. The SDMT120408-F57 WPP35G milling insert is specifically designed for the P material group (steel) and the WPP35G grade with Tiger·tec Gold coating supports the thermal and chip‑forming characteristics of steel machining. What does the F57 chipbreaker provide? The F57 chipbreaker is configured to control chips during steel cutting operations; it promotes predictable chip fragmentation, supports consistent cutting forces and helps maintain surface quality during continuous production. Can the insert be used for stainless steel or other alloys? No specific suitability for stainless steel is stated in the data. The insert is optimised for steel (P). For stainless or high‑alloy materials, selection of a grade specified for those groups should be considered. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength and allows for more stable machining under intermittent loads, improving tool life and reducing the likelihood of chipping compared with very small radii. Which cutter bodies are compatible with this insert form? The SDMT geometry corresponds to standard SDMT‑style milling housings. The square 90° form and size 12 designation are intended for holders designed to accept SDMT indexable inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers (Walter Tools).
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com