TCMT110208-RM4 WSM30S RM4 Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating, the RM4 chipbreaker and a compact triangular form, this insert delivers consistent cutting stability and extended edge life when machining stainless steel and heat‑resistant alloys. Order the TCMT110208‑RM4 WSM30S directly via Metav Werkzeuge or contact our advisers for application guidance. TCMT110208‑RM4 WSM30S triangular indexable insert — Tiger·tec Silver coating, RM4 chipbreaker (Walter Tools) A TCMT110208‑RM4 WSM30S triangular indexable insert engineered for productive turning of stainless steel and high‑temperature alloys, combining a robust coated carbide grade with a fine 0.8 mm corner radius. Tiger·tec Silver coating for heat resistance Optimised RM4 chipbreaker for stable chips 7° clearance angle for smooth cutting Consistent performance on stainless steel and superalloys The combination of the Tiger·tec Silver coating and the WSM30S grade addresses the specific demands of machining stainless steel (ISO group M) and heat‑resistant superalloys (ISO group S). The coating enhances heat resistance and reduces chemical affinity at the cutting edge, which helps to avoid built‑up edge and supports a steadier machining process. For operations where thermal load and material toughness are limiting factors, this coated carbide grade improves cut‑to‑cut consistency and contributes to longer effective tool life without sacrificing surface quality. Reliable chip control and stable cutting geometry The insert’s RM4 chipbreaker is designed to form short, consistent chips under typical turning conditions, reducing the risk of entanglement and enhancing process security. With a 0.8 mm corner radius and a 7° clearance angle, the geometry balances edge strength with the ability to produce a clean surface finish. The triangular 60° shape allows three usable cutting edges per index, improving cost efficiency and ensuring rapid turnaround when re‑indexing is required. Practical benefits for production environments As a compact triangular indexable insert in the Tiger·tec Silver family, this component supports predictable performance in batch and continuous production. The coated carbide substrate promotes stable edge retention under elevated temperatures, while the RM4 chip control reduces downtime linked to chip handling. For workshops seeking a reliable turning solution for challenging materials, the insert offers a straightforward route to improved process stability and consistent part quality without extensive retooling. Contact Metav Werkzeuge for application advice on Walter Tools Tiger·tec Silver inserts and secure the optimal insert for machining stainless steel and superalloys Technical data Article number: TCMT110208-RM4-WSM30S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCMT110208-RM4 WSM30S Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WSM30S Designation: TCMT110208-RM4 WSM30S Facts Clearance angle: 7° Corner radius: 0.8 mm Insert shape: Triangle 60° Insert size: 11 Plate thickness: 02 Special features Coating: Tiger·tec Silver Chipbreaker: RM4 Execution: T Material suitability: stainless steel (M) Material suitability: heat‑resistant alloys / titanium (S) FAQ What materials is this insert suited for? The TCMT110208‑RM4 WSM30S insert from Walter Tools is designed primarily for stainless steel (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), where heat resistance and edge stability are critical. What does the WSM30S grade indicate? WSM30S is a Walter carbide grade within the Tiger·tec Silver coating technology that emphasises thermal resistance and reliable chip formation for demanding materials. How does the RM4 chipbreaker affect production? The RM4 chipbreaker promotes short, controlled chips and helps to maintain a stable cutting process, reducing rework and improving overall production uptime when using the TCMT110208‑RM4 WSM30S. Which geometric features influence surface finish? The 0.8 mm corner radius and the 7° clearance angle contribute to a balance between edge strength and surface quality; the triangle 60° form offers three indexable edges for efficient use. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
TCMT110208-RP4 WPP20G WPP20G Wendeplatten - Walter Tools
Combining Tiger·tec Gold wear resistance with the RP4 chipbreaker and a 0.8 mm nose radius yields reliable surface quality and extended tool life—ideal for productive steel turning. Order directly via Metav Werkzeuge or consult our specialists for application-specific setup. TCMT110208-RP4 WPP20G – indexable turning insert (triangle 60°, 0.8 mm) by Walter Tools The TCMT110208-RP4 WPP20G is a coated carbide indexable insert for turning and boring operations on steel, engineered for consistent chip control and long edge life in production environments. Tiger·tec Gold coated carbide for durable cutting Triangle 60° geometry for stable edge support 0.8 mm nose radius for reliable surface finish RP4 chipbreaker optimised for steel (P) High-performance coating for longer tool life and stable machining The combination of the Tiger·tec Gold coating and the WPP20G grade provides a balance of hardness and toughness that extends tool life under typical turning conditions for steel. The coated carbide substrate reduces flank wear and supports higher cutting parameters, which translates into fewer tool changes and improved uptime. This grade is designed for the thermal and mechanical demands of steel machining and offers process reliability by stabilising wear progression. The result is a repeatable cutting process that supports predictable batch output and consistent surface quality. Geometry and chip control that improve finishing and throughput The triangle 60° insert form paired with the RP4 chipbreaker delivers controlled chip formation in a wide range of steels. A 0.8 mm nose radius produces a stable contact zone for improved finish while still allowing for economical material removal; larger radii generally improve surface finish but can require more cutting force, so this geometry strikes a pragmatic balance. The RP4 chipbreaker is optimised for steel to break and evacuate chips safely, reducing recutting and minimising the risk of built-up edge. In practice, this means fewer surface defects and a reduced need for downstream rework. Practical integration into machining cells for predictable productivity Designed for indexable turning systems, the insert supports fast replacement and consistent orientation, which reduces downtime during tool changes. The M tolerance class and standard insert form make the component compatible with a broad range of toolholders, simplifying inventory and tool management. By choosing this insert, shops benefit from a pragmatic mix of edge life and cutting performance, enabling higher throughput with maintained part quality. For customers seeking process advice, Metav Werkzeuge offers application support to match feed and speed with machine capability and part requirements. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 for recommendations and delivery options Technical data Article number: TCMT110208-RP4-WPP20G-WALTER Name: TCMT110208-RP4 WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Product type: Indexable turning insert Numbers / Core technical data Nose radius: 0.8 mm Clearance angle: 7° Insert form angle: 60° Insert size: 11 Thickness code: 02 Designs / Special features Grade: WPP20G Chipbreaker: RP4 Coating: Tiger·tec Gold (coated carbide) Suitable for: Steel (P) Tolerance class: M FAQ What materials is this insert suitable for? The TCMT110208-RP4 WPP20G insert from Walter Tools is formulated for machining steel (P); the Tiger·tec Gold coating and WPP20G grade optimise wear behaviour for a broad range of unalloyed and alloyed steels. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker on this indexable insert controls chip shape and evacuation during turning of steel, reducing the risk of long, tangled chips and improving surface quality when using recommended cutting parameters. Can this insert be used for finishing and roughing? With a 0.8 mm nose radius and triangle geometry, the insert is suitable for medium-duty turning that requires a good surface finish; combined with appropriate feeds and depths of cut, it supports both finishing operations and economical material removal. Which toolholders are compatible with this insert form? The triangle 60° form and standard tolerance class M make the insert compatible with common indexable turning holders designed for TCMT-style inserts; check the holder seat and clamp system for TCMT compatibility before use. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and indicate no connection between our company and the named brands. The offered item is an original, factory-new product of Walter Tools.
TCMT110208-RP4 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of wear-resistant coating and a proven chipbreaker geometry for consistent productivity and low tooling costs; order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. TCMT110208-RP4 WPP30G – Indexable insert (turning/boring), Tiger·tec Gold, Walter Tools The TCMT110208-RP4 WPP30G is a triangular 60° indexable insert designed for efficient steel machining in turning and boring applications, combining a wear-resistant coating with a stable chip control geometry. Tiger·tec Gold coating for extended tool life Coated carbide grade WPP30G for steel machining Triangle 60° insert with 0.8 mm corner radius RP4 chipbreaker for stable chip control Proven coating and grade for longer productive runs The combination of Tiger·tec Gold technology with the WPP30G coated carbide grade provides a measurable improvement in wear resistance and edge stability during turning and boring of steel. Coatings in this class reduce abrasive wear and help maintain the cutting edge at elevated temperatures; the result is fewer indexings per component batch and a lower cost per produced part. For operations where consistent surface finish and predictable tool life are priorities, this insert offers a reliable balance between economy and performance. Geometry that stabilises the cut and chip flow A triangle 60° form with a 0.8 mm corner radius delivers a robust cutting edge suitable for general-purpose turning while allowing positive engagement in many workholding setups. The RP4 chipbreaker is designed to control chip formation for typical steel grades, reducing the risk of long, entangling swarf and improving process stability. The modest 7° clearance angle helps to minimise rubbing on the flank, which supports repeatable surface quality and reduces cutting forces in interrupted cuts. Engineered for process reliability and repeatability Manufactured by a leading precision-tool brand, this insert supports stable production through consistent geometry and tolerance class M, which aids reproducible seating and clamping in toolholders. The coated hardmetal construction is optimised for the heat and chip behaviour encountered when machining unalloyed and alloyed steel, delivering predictable performance across batch runs. Using a grade and series engineered for broad steel applications reduces the need for multiple grades and simplifies inventory management in busy workshops. Practical selection and application guidance For general turning and light boring in steel, the combination of the TCMT110208-RP4 WPP30G grade and geometry offers an efficient first choice: it balances edge strength and wear resistance while supporting good chip control. In applications requiring softer cutting action or finer finishes, consider smaller corner radii or alternative chipbreaker styles; for heavy interrupted cuts, choose a toolholder and clamping system that ensure positive location to exploit the insert’s full potential. The insert’s designation and series make it straightforward to match to established ISO toolholder systems and cutting data charts. Discuss application details and secure Tiger·tec Gold inserts from Metav Werkzeuge — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: TCMT110208-RP4-WPP30G-WALTER Article designation: TCMT110208-RP4 WPP30G Type: Indexable insert, turning/boring Brand: Walter Tools Series: Tiger·tec Gold Grade: WPP30G Facts Inscribed circle: 11 mm Corner radius: 0.8 mm Clearance angle: 7° Thickness designation: 02 Tolerance class: M Special features Coating technology: Tiger·tec Gold (coated carbide) Chipbreaker: RP4 Plate form: Triangle 60° Material application: Steel (P) Execution: T FAQ What materials is this insert suited for? The TCMT110208-RP4 WPP30G insert is specified for machining steel (P); the WPP30G grade and Tiger·tec Gold coating are optimised for the typical heat and chip behaviour of unalloyed and alloyed steel. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker on this insert promotes controlled chip formation in steel cutting, which helps maintain process stability and reduces the incidence of long, entangling chips during turning and boring. Is the triangle 60° geometry suitable for general turning tasks? Yes; the triangle 60° shape provides three usable cutting edges per index and a sturdy geometry suited to a broad range of turning and light boring operations in steel. What does the WPP30G designation indicate? WPP30G denotes Walter Tools’ coated carbide grade optimised for steel applications; the name reflects a balance of wear resistance and toughness under typical steel cutting conditions. Which SKU should be ordered for this insert? Order the SKU TCMT110208-RP4-WPP30G-WALTER for the described insert and grade to ensure the Tiger·tec Gold specification and RP4 chipbreaker are supplied. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT110304-FP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of robust wear resistance, reliable chip control and straightforward indexability to keep machining cycles productive and predictable; order the insert through Metav Werkzeuge or consult our specialists for application-specific cutting data. TCMT110304-FP4 WPP10G indexable insert (Triangle 60°) for steel — Walter Tools The TCMT110304-FP4 WPP10G is a triangular indexable insert intended for drilling, boring and turning on steel, engineered to deliver consistent cutting edge stability and dependable tool life in production environments. Tiger·tec Gold coating for extended tool life Designed for steel (ISO P) with stable chip control Triangle 60° form, 0.4 mm corner radius FP4 chipbreaker for consistent surface finish Optimised performance in steel machining The insert is supplied in the WPP10G carbide grade within the Tiger·tec Gold series, a coated carbide solution designed for high process stability when machining steels. The grade balances wear resistance and toughness to suit a wide range of steel applications, reducing the need for frequent index changes and supporting longer productive intervals. As a consequence, cycle-time variability is minimised and overall tool consumption is lowered, which supports predictable production planning and cost control. Consistent surface finish and dependable chip control Built with an FP4 chipbreaker and a triangle 60° geometry, the insert provides controlled chip formation and predictable evacuation in interrupted and continuous cuts. The 0.4 mm corner radius and 7° clearance angle help maintain a strong cutting edge while producing stable surface quality on steels. For less experienced users: the chipbreaker guides chips away from the cutting zone and reduces built-up edge, which improves part finish and reduces rework in serial production. Practical application guidance and compatibility This insert is dimensioned in the common TCMT format and is classified in tolerance class M, offering repeatable seating and interchangeability in compatible toolholders. It is primarily intended for ISO P materials (steel), where the combination of Tiger·tec Gold coating and the insert geometry supports both roughing and semi-finishing operations. The design facilitates quick indexing, so tool changeover is fast and machine downtime is reduced. For specific cutting parameters and holder recommendations, refer to standard cutting data for coated carbide inserts in steel applications. For tailored tooling recommendations on Walter Tools’ Tiger·tec Gold inserts or to obtain cutting data for your steel components, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TCMT110304-FP4-WPP10G-WALTER Designation: TCMT110304-FP4 WPP10G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP10G Facts Clearance angle: 7° Corner radius: 0.4 mm Plate size: 11 (format) Plate thickness: 03 Tolerance class: M Special features Coating: Tiger·tec Gold Chipbreaker: FP4 Material base: coated carbide Form: Triangle 60° Application group: Steel (ISO P) Execution: T FAQ What materials is this insert suitable for? The TCMT110304-FP4 WPP10G insert is formulated for ISO P steel applications; the WPP10G grade is optimised for typical heat and chip formation encountered when machining steel. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker on this insert directs chip formation for smoother evacuation and reduced built-up edge, improving surface finish and protecting the cutting edge during steel turning and boring. Is the insert compatible with standard TCMT toolholders? Yes, the TCMT110304-FP4 WPP10G follows the TCMT format and seating tolerances (class M), ensuring compatibility with conventional TCMT-compatible toolholders. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP10G grade increases wear resistance and process security during steel machining, extending usable tool life while maintaining cutting-edge stability. Can this insert be used for finishing passes? With its 0.4 mm corner radius and FP4 chipbreaker, the insert is suitable for semi-finishing and finishing operations on steel when correct cutting parameters are applied. Manufacturer: Walter AG; Tübingen; Germany — Brand: Walter Tools. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only; there is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
TCMT110304-FP4 WPP20G T Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, an FP4 chipbreaker and a triangular 60° design for reliable and economical steel machining. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. TCMT110304-FP4 WPP20G — Turning insert (triangle 60°) for steel by Walter Tools The TCMT110304-FP4 WPP20G is a triangular turning insert intended for ISO P (steel) applications, engineered for stable chip control and extended tool life in serial machining. Triangle 60° geometry for secure clamping Tiger·tec Gold coating for longer life FP4 chipbreaker for stable chip control Suited for steel machining (ISO P) Greater process stability through controlled chip formation The combination of the FP4 chipbreaker and the insert geometry provides improved chip control during steel turning. Stable chip formation reduces interruptions from manual chip removal and minimises the risk of chip-related surface defects, which leads to higher uptime and fewer rejected parts. The design supports consistent cutting forces, so cycle times remain predictable even under varying feed or depth conditions. In practice this translates into fewer machine stops and a smoother production flow for medium-duty steel turning operations. Reduced tooling costs due to advanced Tiger·tec Gold coating The Tiger·tec Gold coating on the coated carbide substrate reduces flank and crater wear, helping to extend useful tool life and lower the cost per component. Coating benefits include improved heat resistance and enhanced adhesion to the carbide body, which preserve the cutting edge at elevated temperatures typical for machining steel. This results in longer periods between index changes and a measurable reduction in tooling consumption for high-volume batches, delivering clear economic advantages in production environments. Versatile triangular form and precise edge geometry for finishing and roughing The triangle 60° form offers three indexable cutting edges per insert, increasing economical use of each item. A 0.4 mm corner radius provides a balance between edge robustness and surface finish, suitable for general turning tasks where a compromise of strength and quality is needed. The 7° relief angle reduces rubbing and helps to maintain cutting efficiency, while the insert thickness (03) and size (11) ensure compatibility with common toolholders for this family. This combination supports both light finishing cuts and moderate roughing, making the insert a versatile choice in mixed-production shops. Contact Metav Werkzeuge today to discuss the Walter Tools TCMT110304-FP4 WPP20G turning insert, request application advice or obtain a tailored quotation via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TCMT110304-FP4-WPP20G-WALTER Product type: Turning insert (indexable) Designation: TCMT110304-FP4 WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Relief angle: 7° Corner radius: 0.4 mm Insert form: Triangle 60° Insert size: 11 Thickness: 03 Tolerance class: M Special features Chipbreaker: FP4 Coated carbide grade: WPP20G Suitable for: Steel (ISO P) Execution: T Designation without grade: TCMT110304-FP4 ISO designation: TCMT110304-FP4 WPP20G FAQ Which materials is this insert designed for? The TCMT110304-FP4 WPP20G by Walter Tools is designed primarily for ISO P materials, i.e. unalloyed and alloyed steel grades where the coating and substrate perform reliably under the typical heat and chip-formation behaviour of steel. What advantages does the Tiger·tec Gold coating offer? Tiger·tec Gold provides improved thermal resistance and wear protection on the coated carbide substrate, which helps the WPP20G grade retain a sharp, durable cutting edge and extend tool life in steel turning applications. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker promotes short, controlled chips when turning steel, reducing the likelihood of entanglement and improving surface quality; this behaviour supports uninterrupted operation and consistent part finish with the Walter Tools insert. How many usable edges are available per insert and what does that mean economically? The triangular 60° form provides three indexable cutting edges per insert, increasing the number of usable edges and lowering the effective cost per cutting edge compared with single-edge solutions. Walter Tools / Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected product designations are used here for explanatory purposes only and do not imply any affiliation between Metav Werkzeuge and the quoted manufacturers. The item offered is an original, brand-new product from the manufacturer.
TCMT110304-MP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, consistent chip control and precise geometry to increase turning productivity while reducing tool changes; order applications advice from Metav Werkzeuge or consult their specialists for process optimisation. TCMT110304-MP4 WPP10G indexable turning insert, Tiger·tec Gold, for Stahl — Walter Tools The TCMT110304-MP4 WPP10G is an indexable turning insert designed for reliable medium to heavy-duty turning of Stahl, offering a coated-carbide grade and a stable chipformer for consistent results Tiger·tec Gold coating WPP10G Triangle 60° form for versatile turning MP4 chipbreaker for controlled chips 7° clearance and 0.4 radius for fine finishes Optimised grade and coating for productive turning The combination of Tiger·tec Gold technology and the WPP10G coated-carbide grade provides a reliable balance of wear resistance and toughness for machining Stahl. The coated structure reduces flank wear and extends tool life, which leads to fewer interruptions for insert changes and a more stable production rhythm. In practical terms, this means longer cutting windows at higher cutting data while maintaining acceptable surface quality, so cycle times can be reduced without sacrificing predictability. Geometry designed to stabilise cuts and improve surface finish The triangle 60° form combined with a 0.4 corner radius and a 7° clearance angle produces a geometry that resists chipping and promotes a steady cutting action. The MP4 chipbreaker shapes and evacuates chips efficiently during continuous turning operations, helping to avoid entanglement and enabling safer high-feed passes. The insert size 11 with thickness 03 supports robust toolholder clamping, increasing process stability and delivering consistent part finish over longer tool life. Clear application benefits and process reliability Specified for applications in Stahl, the insert is manufactured for dependable behaviour under the thermal and mechanical demands of steel turning. The WPP10G grade is tailored to typical steel chip formation and heat conditions, which enhances reproducibility across batches. For workshops aiming to raise productivity, this insert contributes to fewer tool changes and better repeatability; for process planners it offers a familiar, well-documented performance profile that integrates into existing turning strategies. For tailored machining recommendations for Walter Tools Tiger·tec Gold inserts such as the TCMT110304-MP4 WPP10G, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss optimal parameters and tooling systems Technical data Article number: TCMT110304-MP4-WPP10G-WALTER Designation: TCMT110304-MP4 ISO designation: TCMT110304-MP4 WPP10G Manufacturer: Walter Tools Series: Tiger·tec Gold Core measurements Size: 11 Thickness: 03 Corner radius: 0.4 Clearance angle: 7° Tolerance class: M Materials & features Grade: WPP10G (coated carbide) Chipbreaker: MP4 Insert shape: Triangle 60° Material application: Stahl Execution: T FAQ Which materials can be machined with this insert? The WPP10G grade is specified for machining Stahl; the TCMT110304-MP4 WPP10G insert is optimised for unalloyed and alloyed steels in standard turning applications. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP10G grade improves wear resistance and thermal stability, extending cutting life and supporting higher material removal rates with consistent edge behaviour. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker controls chip formation and evacuation during turning, reducing the risk of built-up edge and improving surface finish in continuous cuts on Stahl. Is this insert suitable for finishing or roughing operations? With its 0.4 corner radius and triangle geometry, the insert is versatile; it supports both stable finishing and productive roughing strategies depending on cutting data and toolholder setup. Are recommended cutting parameters available for this grade? Typical cutting data depend on application and machine; for precise parameter advice for the TCMT110304-MP4 WPP10G, Metav Werkzeuge can provide guidance based on workpiece grade and cycle requirements. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Brand names and protected trademarks are the property of their respective owners and are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original factory-new goods of the manufacturer Walter Tools. The Walter AG (marketed as Walter Tools) is part of the Sandvik group.
TCMT110304-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, effective chip control and a robust cutting edge for consistent production results; the Tiger·tec Gold WPP20G grade delivers longer tool life and dependable performance in steel machining—order the insert via Metav Werkzeuge or consult our advisers for application-specific recommendations. TCMT110304-MP4 WPP20G turning/boring indexable insert by Walter Tools — Tiger·tec Gold coating, MP4 chipbreaker TCMT110304-MP4 WPP20G is a triangular indexable insert designed for versatile boring and turning operations on steel; it combines a coated-carbide grade with a controlled chipbreaker for stable cutting in ISO P applications Tiger·tec Gold coating for extended tool life WPP20G grade optimised for steel machining MP4 chipbreaker for controlled chip formation Triangle 60° shape with 0.4 mm corner radius Improved process reliability through advanced grade and coating The insert’s Tiger·tec Gold technology and WPP20G grade provide a measurable improvement in wear resistance and edge stability for steel machining. Coated carbide combines a wear-resistant surface layer with a tough substrate, which reduces flank wear and extends tool life under typical turning and boring conditions. The relief angle 7° and the moderate corner radius (0.4 mm) balance strength and edge sharpness, reducing the risk of premature chipping while maintaining a consistent surface finish. These attributes result in fewer tool changes and more predictable tool-life planning for production environments. Safer chip control and flexible edge utilisation for productive machining The MP4 chipbreaker is engineered to produce short, manageable chips in a wide range of cutting parameters, improving evacuation and reducing the risk of entanglement in bores and facing operations. The triangle 60° geometry gives three cutting edges per insert, enabling economical indexing without compromising rigidity. The insert dimensions (inscribed circle 11, thickness code 03) and tolerance class M suit standard toolholders for turning and boring, providing a reliable fit and repeatable clamping. Together, these features support higher uptime and reduced secondary handling, which enhances overall process efficiency. Clear application focus and handling benefits for workshop and production use Designed specifically for ISO P (steel) applications, this indexable insert offers a practical solution for both roughing and finishing operations thanks to its balanced edge geometry and coating. The coated carbide grade is formulated to accommodate the heat and chip formation typical of steel cutting, making it suitable for unalloyed and alloyed steels. In everyday use, the insert’s consistent performance simplifies tool selection for engineers and shop floor staff, promoting predictable component quality and a straightforward inventory of replaceable parts. For specialised material mixes or unusual geometries, the grade’s universality in steel machining reduces the need for multiple, dedicated inserts. Contact Metav Werkzeuge for tailored cutting data and availability of Walter Tools Tiger·tec Gold WPP20G inserts (SKU TCMT110304-MP4-WPP20G-WALTER) and arrange a technical consultation for machining optimisation Technical data SKU: TCMT110304-MP4-WPP20G-WALTER Article: TCMT110304-MP4 WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Shape: Triangle 60° Inscribed circle / size: 11 Thickness code: 03 Corner radius: 0.4 mm Relief angle: 7° Tolerance class: M Special features Grade: WPP20G (coated carbide) Chipbreaker: MP4 Application group: Steel (ISO P) Suitable for turning and boring indexable applications Coating technology: Tiger·tec Gold FAQ Which materials is this insert intended for? The TCMT110304-MP4 WPP20G insert is optimised for steel machining and classified for ISO P applications; the WPP20G grade and Tiger·tec Gold coating are tailored to the heat and chip formation typical of steels. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker on this Walter Tools insert promotes controlled chip formation and safer evacuation in turning and boring operations, reducing the likelihood of chip entanglement and improving surface consistency. What does the 0.4 mm corner radius mean for component finish? A 0.4 mm corner radius provides a compromise between edge strength and finish quality; on the TCMT110304-MP4 this helps maintain a stable cutting edge while delivering good surface results for a range of feeds. Is this insert compatible with standard triangular toolholders? Yes, the triangle 60° form and the size code 11 correspond to common toolholder interfaces for triangular indexable inserts, enabling straightforward replacement and indexing. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any affiliation. The offered article is an original, factory-new product from the manufacturer. Replace "Stainless Steel" with "rostfreier Stahl"; replace "Steel" with "Stahl"; replace "Brass" with "Messing"; replace "Wood and Plastic" with "Holz und Plastik"; replace "Stainless" with "rostfrei"
TCMT110304-MP6 WPP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, MP6 chip control and a compact triangular 60° design for reliable, productive turning of steel; order the TCMT110304‑MP6 WPP20G directly via Metav Werkzeuge or consult our specialists for process integration. TCMT110304‑MP6 WPP20G (TCMT110304‑MP6) — Turning insert for steel, Tiger‑tec Gold (Walter Tools) The TCMT110304‑MP6 WPP20G is a triangular 60° turning insert engineered for efficient steel machining, offering a 0.4 mm corner radius and a Tiger‑tec Gold coated grade for extended tool life. *Tiger‑tec Gold coated grade WPP20G *MP6 chipbreaker for reliable chips *Triangular 60° form, 0.4 mm corner radius *Optimised for steel machining (P group) High process reliability for demanding steel applications The Tiger‑tec Gold coating combined with the WPP20G grade provides a balance of wear resistance and toughness that suits many steel turning operations. The coated carbide substrate reduces flank wear under typical heat generation when machining steel, while the chosen grade composition supports consistent cutting-edge stability. For workshops aiming to keep cycle times short and tool change frequency low, this insert offers a predictable performance profile that helps maintain part tolerances and surface quality without frequent regrinds. Effective chip control and surface integrity Equipped with the MP6 chipbreaker, the insert actively manages chip formation to avoid long, tangled chips and to support secure chip evacuation. Controlled chip formation reduces interruptions and minimises the risk of surface scratching or tool interference, contributing to a steady production flow. The combination of a precise 0.4 mm corner radius and the triangular geometry delivers stable cutting conditions for light to medium finishing passes, helping to achieve reliable surface integrity on turned components. Compatibility, handling and integration benefits Designed in accordance with common insert dimensions, the TCMT110304‑MP6 WPP20G fits standard TCMT toolholders and is intended for the ISO P material group (steel). The 60° triangular form enables three indexable cutting edges per insert, supporting economical edge usage and quick indexing. Tolerance class M ensures reproducible seating and repeatable positioning in the pocket. For production planners, the result is a compact, robust insert that integrates easily into existing tool systems and contributes to predictable tool life and process stability. For operational advice or to place an order for Walter Tools inserts with Tiger‑tec Gold performance, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support Technical data SKU: TCMT110304-MP6-WPP20G-WALTER Designation: TCMT110304‑MP6 WPP20G Product type: Drehwendeschneidplatte (turning insert) Facts Relief angle: 7° Corner radius: 0.4 mm Inscribed circle / size: 11 mm Thickness code: 03 Tolerance class: M Special features Grade: WPP20G Series: Tiger‑tec Gold Chipbreaker: MP6 Form: Triangular 60° Material group: P (steel) Execution: T Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The TCMT110304‑MP6 WPP20G is formulated for ISO group P, i.e. mainly steel, and the WPP20G grade optimises wear resistance and toughness for common steel turning tasks. How does the MP6 chipbreaker affect machining? The MP6 chipbreaker shapes chips into short, controlled segments, improving evacuation and reducing the risk of rework caused by entangled chips when using the TCMT110304‑MP6 WPP20G insert. How many cutting edges are available per insert? The triangular 60° geometry provides three indexable cutting edges per insert, allowing economical use of the TCMT110304‑MP6 WPP20G before replacement. Can this insert be used for finishing passes? Yes — the 0.4 mm corner radius and the Tiger‑tec Gold coating make the insert suitable for light to medium finishing passes with good surface quality on steel. Which toolholders are compatible with this insert? The insert follows standard TCMT dimensions and fits conventional TCMT toolholders; ensure correct seating and clamping to maintain the tolerance class M and repeatability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is original, factory‑new merchandise of the manufacturer.
TCMT110308-FP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coated carbide for extended tool life, the FP4 chipbreaker for stable chip control, and precise geometry for consistent turning results — order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TCMT110308-FP4 TCMT110308-FP4 WPP10G — Indexable turning insert for steel (Tiger·tec Gold) by Walter Tools A TCMT110308-FP4 WPP10G indexable insert engineered for steel machining, combining a Tiger·tec Gold coated carbide grade with an FP4 chipbreaker to ensure reliable chip control and productive material removal. Tiger·tec Gold coated carbide FP4 chipbreaker for stable chip control 7° clearance angle for reliable cutting Triangle 60° form, 0.8 mm corner radius Efficient chip control for higher productivity The combination of the Tiger·tec Gold coating and coated carbide substrate provides enhanced resistance to wear and thermal loading, which translates into longer tool life and more stable cutting conditions. The integrated FP4 chipbreaker is optimised for typical steel chip formation, promoting controlled chip segmentation and safe evacuation. For workshops seeking steady cycle times and fewer interruptions, this design reduces the risk of built-up edge and improves process repeatability. The insert construction supports continuous and interrupted cuts alike while maintaining surface quality and dimensional consistency. Precise geometry for reproducible results Engineered geometry delivers predictable edge behaviour: the triangle 60° form offers three cutting edges per insert and straightforward indexability, while the 0.8 mm corner radius increases edge strength for semi-finishing and general turning tasks. The 7° clearance angle helps maintain positive cutting action and reduces rubbing on the flank face, improving surface finish and lowering cutting forces. Together, these attributes support consistent part tolerances and make tool set-up and referencing more efficient, which is especially valuable in batch production and CNC turning centres. Industrial suitability and application guidance Specified for steel under the ISO P group, the WPP10G grade balances wear resistance and toughness to cover a wide range of steel machining tasks (categories covering wear-resistant to more ductile steels). The insert’s tolerance class M and Walter Tools manufacturing standards ensure reproducible geometry across batches, aiding process stability in serial production. For engineers considering tooling systems, this insert provides a robust option for facing, longitudinal turning and light profiling where long tool life and consistent surface quality are required. For demanding steel turning applications, request availability of the Walter Tools TCMT110308-FP4 WPP10G from Metav Werkzeuge for specific advice on holder compatibility and process parameters — email info@metav-werkzeuge.com or call +49 2822 7131930 for a prompt consultation Technical data Article number: TCMT110308-FP4-WPP10G-WALTER Name: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCMT110308-FP4 WPP10G Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger-tec Gold Grade: WPP10G Facts Clearance angle: 7° Corner radius: 0.8 mm Inscribed circle / size: 11 Plate thickness: 03 Shape: Triangle 60° Chipbreaker: FP4 Special features Coating: Tiger·tec Gold (coated carbide) Suitable for: Steel (ISO P) Tolerance class: M Execution: T Designation: TCMT110308-FP4 ISO designation: TCMT110308-FP4 WPP10G FAQ What materials is this insert suitable for? The TCMT110308-FP4 WPP10G is designed primarily for machining steels, classified under ISO P, and is optimised for the typical heat and chip formation encountered when turning unalloyed and alloyed steels. How does the FP4 chipbreaker affect performance? The FP4 chipbreaker on this insert promotes controlled chip segmentation and reliable evacuation during steel turning, reducing the risk of long, tangled chips and improving surface finish and tool life when using the TCMT110308-FP4 WPP10G. Which operations are best suited to this insert? The TCMT110308-FP4 WPP10G is well suited to longitudinal turning, facing and semi-finishing operations where a balance of wear resistance and toughness is required to maintain consistent results on steel components. What geometric features support consistent results? Key contributors to reproducible performance are the triangle 60° form for multiple indexed edges, the 0.8 mm corner radius for edge strength, and the 7° clearance angle which reduces flank rubbing and supports improved surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, brand-new goods from the manufacturer.
TCMT110308-FP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a precise FP4 chipbreaker and triangle geometry for efficient steel turning; order the insert directly via Metav Werkzeuge or ask the consultants for cutting data and availability. TCMT110308-FP4 WPP20G turning/boring indexable insert, Tiger‑tec Gold – Walter Tools The TCMT110308-FP4 WPP20G is a triangular 60° indexable insert designed for reliable turning and boring of steel components, offering consistent chip control and long tool life. Triangle 60° geometry for versatile turning Tiger‑tec Gold coated carbide for long tool life FP4 chipbreaker optimised for steel machining 0.8 mm corner radius and 7° clearance angle Consistent performance from Tiger‑tec Gold coating The coated carbide grade WPP20G, based on Tiger‑tec Gold technology, delivers consistently stable wear behaviour when machining steels. The multilayer coating reduces flank and crater wear, which translates into longer effective cutting life and fewer tool changes. For production environments where repeatable surface quality and predictable tool life matter, this coating technology supports uninterrupted runs and simpler process planning. The coating’s design balances toughness and wear resistance, making it suitable for both roughing and finishing cuts in many steel applications. Geometry and chip control that reduce rework A 60° triangular shape combined with the FP4 chipbreaker provides controlled chip formation and positive cutting engagement on steel. The indexable geometry offers three cutting edges per insert, improving economy, while the 0.8 mm corner radius helps maintain edge strength under higher feed rates. The 7° clearance angle reduces rubbing and minimises heat transfer to the flank, preserving dimensional accuracy. The FP4 chipbreaker is engineered to break and evacuate chips reliably in typical steel turning conditions, lowering the risk of built-up edge and improving surface finish. Productivity gains through stable process behaviour The matched combination of grade and geometry means fewer interruptions and a lower cost per component. The WPP20G grade is optimised for the thermal and mechanical demands of steel machining, enabling higher cutting speeds and longer intervals between index changes. Stable chip control and a robust cutting edge contribute directly to reduced cycle times and consistent part tolerances. For job shops and production lines alike, this leads to measurable productivity improvements and a simpler tool and spare parts workflow. Practical application and compatibility guidance This insert is intended for the ISO P material group and is suitable for unalloyed and alloyed steel. With an insert size of 11 and a plate thickness of 3.0 mm, the geometry is well suited to a wide range of lathe toolholders and boring bar systems designed for triangular TCMT inserts. The coated carbide substrate and chipbreaker combination favour common turning operations—from shoulder and profile turning to light roughing—while maintaining surface integrity. For best results, pair the insert with appropriate cutting parameters and coolant strategy tailored to the component and machine rigidity. For tailored cutting data, stock information and application advice on Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TCMT110308-FP4-WPP20G-WALTER Designation: TCMT110308-FP4 WPP20G Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Insert shape: Triangle 60° Corner radius: 0.8 mm Clearance angle: 7° Insert size: 11 Thickness: 3.0 mm Tolerance class: M Special features Chipbreaker: FP4 Coating: Tiger‑tec Gold (coated carbide) Material application: Steel (ISO P) Grade: WPP20G Product type: Turning/boring indexable insert FAQ What steels is this insert suitable for? The TCMT110308-FP4 WPP20G insert is designed for the ISO P material group and is suited to unalloyed and alloyed steel machining. How does the FP4 chipbreaker improve machining? The FP4 chipbreaker on this Walter Tools insert promotes consistent chip formation and evacuation when turning steel, reducing built‑up edge and improving surface finish. What are the key dimensions to check for toolholder compatibility? Confirm the insert shape (triangle 60°), insert size (11) and thickness (3.0 mm) against the toolholder specifications to ensure correct seating and clamping. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (marketed as Walter Tools) is part of the Sandvik group and is a leading manufacturer of precision metalworking tools, headquartered in Tübingen. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, brand‑new goods from the manufacturer.
TCMT110308-MP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger‑tec Gold coating, a reliable MP4 chipbreaker and a compact triangular geometry for efficient turning and boring of Stahl components; order directly via Metav Werkzeuge or speak with our consultants for tailored application advice. TCMT110308-MP4 WPP10G — Drill/boring and turning indexable insert for Stahl by Walter Tools TCMT110308-MP4 WPP10G is a multifunctional indexable insert designed for turning and boring operations in Stahl, featuring Tiger‑tec Gold coating and an MP4 chipbreaker for controlled cutting performance Tiger‑tec Gold coated carbide WPP10G MP4 chipbreaker for consistent chip control 7° relief angle for stable cutting 0.8 mm corner radius for edge strength Increased process reliability through coating and chip control The combination of the Tiger‑tec Gold coating and a dedicated MP4 chipbreaker delivers notably improved tool life and predictable chip formation when machining Stahl. The advanced coating reduces flank and crater wear while the chipbreaker shapes chips for safer evacuation, which in turn lowers downtime and enhances throughput. For operations where repeatability matters, this insert offers a measurable reduction in unexpected tool changes, helping to maintain stable production cycles. Compact geometry that balances strength and versatility The triangular 60° format with a 0.8 mm corner radius and 7° clearance provides a robust cutting edge that tolerates intermittent cuts and variable feed rates. This geometry is particularly suited to general-purpose turning and light boring tasks in the ISO P material group, enabling flexible use across batch sizes. The design supports confident roughing and finishing passes with a single indexable solution, reducing tool inventory and set-up complexity. Easy integration into existing toolpaths and holders With the ISO designation TCMT110308-MP4 WPP10G, the insert fits common toolholders designed for triangular inserts, permitting straightforward replacement and predictable seating. The coated carbide grade is optimised for the thermal and mechanical loads typical of Stahl machining, allowing stable cutting parameters and simpler process qualification. Where productivity gains are required, this insert provides a practical, low-risk upgrade that integrates seamlessly into established turning and boring setups. For high-productivity turning and boring of Stahl, contact Metav Werkzeuge for application guidance and procurement: info@metav-werkzeuge.com | +49 2822 7131930 — Metav Werkzeuge will assist with selection, availability and technical clarifications Technical data Article number: TCMT110308-MP4-WPP10G-WALTER Designation: TCMT110308-MP4 WPP10G Product type: Drill/boring and turning indexable insert Brand: Walter Tools Series: Tiger‑tec Gold Grade: WPP10G Chipbreaker: MP4 Form: Triangle 60° Code: TCMT110308-MP4 Tolerance class: M Version: T Core specifications Relief angle: 7° Corner radius: 0.8 mm Plate size: 11 mm Thickness code: 03 Shape angle: 60° Tolerance: M Features & applications Coating / material: Tiger‑tec Gold (coated carbide) Material group: P Suitable for: Stahl (ISO P) Typical uses: Turning, boring, general-purpose machining ISO designation: TCMT110308-MP4 WPP10G FAQ What materials is this insert suitable for? The TCMT110308-MP4 WPP10G is specified for the ISO P group and is suitable for machining Stahl, making it a reliable choice for a wide range of unalloyed and alloyed Stahl components. Which chip control is provided by this insert? The integrated MP4 chipbreaker on the TCMT110308-MP4 WPP10G creates short, controllable chips, improving evacuation and reducing potential for entanglement during turning and boring operations. How does the Tiger‑tec Gold coating help in production? The Tiger‑tec Gold coating enhances wear resistance and thermal stability of the coated carbide grade WPP10G, which prolongs tool life and supports consistent surface finish during extended runs on Stahl. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and product names are the property of their respective owners. Mention of brand names is for explanation only; the offered article is original, factory-new merchandise of the manufacturer.
TCMT110308-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the WPP20G grade delivers reliable wear resistance and consistent chip formation for steel machining; paired with the triangle 60° geometry and a 0.8 mm corner radius, this insert supports stable turning processes. Order the insert directly via Metav Werkzeuge or consult the team for application advice. TCMT110308-MP4 WPP20G — TCMT110308-MP4 WPP20G indexable turning insert for steel (Walter Tools) The TCMT110308-MP4 WPP20G is a triangle 60° indexable turning insert with Tiger·tec Gold coating, designed for productive steel machining in general turning applications Tiger·tec Gold coated for high wear resistance WPP20G grade optimised for steel machining Triangle 60° form with 0.8 mm corner radius 7° relief angle for stable chip control Greater productivity through optimised wear resistance The combination of the Tiger·tec Gold coating and the WPP20G cutting grade is engineered for high process reliability when machining steel. The coating technology reduces flank and crater wear, which translates into longer tool life and fewer interruptions for insert changes. For production environments where consistent component quality matters, this configuration lowers downtime and supports predictable cycle times without complex parameter adjustments. Stable chip control and repeatable edge performance Equipped with the MP4 chipbreaker and a 0.8 mm corner radius, the insert promotes controlled chip formation under common turning conditions. The moderate corner radius balances edge strength with surface finish, making the geometry suitable for medium-depth finishing and semi-finishing passes. Clear chip detachment improves swarf handling at the machine, reducing the risk of re-cutting and enhancing overall process stability. Geometry tailored for reliable clamping and cutting forces The triangle 60° shape offers three cutting corners per insert, supporting cost-effective indexability and quick corner changes. The specified 7° relief angle helps maintain a consistent cutting engagement and reduces rubbing at the flank, which supports lower cutting forces and reduced vibration in many setups. This geometric package is particularly effective on conventional lathes and CNC turning centres where predictable cutting behaviour is essential. Practical specification guidance for selection and use When specifying this insert, consider the WPP20G suitability for unalloyed and alloyed steels – it is balanced for the thermal and mechanical conditions typical of steel turning. The plate thickness code and size align with common toolholder standards for this insert family, enabling straightforward integration into existing holders. For unfamiliar setups, a short machining trial at moderate speeds and feeds will quickly validate the optimal cutting data for the component and machine combination. Contact Metav Werkzeuge for tailored application recommendations on Walter Tools Tiger·tec Gold inserts and to discuss the best cutting parameters for specific steel grades — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TCMT110308-MP4-WPP20G-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCMT110308-MP4 WPP20G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP20G Facts Relief angle: 7° Corner radius: 0.8 Plate size: 11 Plate thickness: 03 Shape: Dreieck 60° Tolerance class: M Materials & Features Coating: Tiger·tec Gold Chipbreaker: MP4 Material group: P (steel) Execution: T Bezeichnung without grade: TCMT110308-MP4 ISO designation: TCMT110308-MP4 WPP20G SKU / UID: TCMT110308-MP4-WPP20G-WALTER FAQ What materials is this insert suitable for? The TCMT110308-MP4 WPP20G insert is designed primarily for steel applications (material group P), matching the WPP20G grade’s balance between wear resistance and toughness. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on this insert reduces wear rates and improves thermal resistance, which helps maintain dimensional stability and extends edge life during continuous turning operations. Is the chipbreaker type important for process stability? Yes, the MP4 chipbreaker is configured to promote consistent chip formation for the insert geometry, which supports reliable swarf control and reduces the likelihood of chip-related interruptions. How many cutting edges are available per insert and what is the geometry? The triangular 60° form provides three usable cutting corners per insert, combined with a 0.8 mm corner radius to balance edge strength and surface finish. Can this insert be used on automated turning centres? The insert’s geometry and coating are suitable for CNC turning centres; however, final cutting data should be validated in a short trial to match machine stiffness, clamping and workpiece material. Walter Tools: The Walter AG (brand appearance: Walter Tools) is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are used for explanation only. There is no affiliation between our company and the mentioned brands. The offered item is an original, brand-new article from the manufacturer.
TCMT110308-MP6 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger·tec Gold coating and the MP6 chipbreaker for consistent chip control and extended tool life; order the insert directly via Metav Werkzeuge or consult the team for application advice. TCMT110308-MP6 WPP20G Drehwendeschneidplatte by Walter Tools — Triangle 60° insert with MP6 chipbreaker TCMT110308-MP6 WPP20G is an indexable turning insert designed for machining steel in ISO group P, offering robust performance for general and hardened operations. Tiger·tec Gold coating for long tool life MP6 chipbreaker for reliable chip control Triangle 60° form with 0.8 mm corner radius Designed for steel machining (ISO P) Faster, more consistent turning in steel production The combination of Tiger·tec Gold coating and the WPP20G carbide grade provides a balance between wear resistance and toughness, which translates into more stable cutting performance on steels. The MP6 chipbreaker is engineered to produce predictable chip shapes and to reduce built-up edge, improving surface finish and minimising machine stops for manual chip clearing. With a 7° clearance angle and a 0.8 mm corner radius, the insert supports secure seating and predictable edge engagement, which benefits cycle-time stability and repeatable part quality. These technical characteristics reduce unplanned downtime and help maintain a steady production flow. Simple integration and dependable process security Thanks to the universal TCMT geometry and the triangle 60° form, the insert fits many standard toolholders and applications, enabling quick changeover and reduced inventory complexity. The tolerance class M ensures consistent dimensional accuracy between inserts, supporting repeatable set-ups and predictable toolpath results. As an indexable solution, the component allows quick indexing of new cutting edges without regrinding, which cuts tool-change time and simplifies process planning. The overall package is aimed at machine shops and production lines seeking reliable turning performance with straightforward logistics. Lower costs through extended life and predictable wear The coated hardmetal grade WPP20G is optimised for steel machining and offers a longevity/versatility mix that lowers cost per part in medium- to high-volume operations. Fewer edge changes and a stable cutting edge mean less tool consumption and reduced waste. The insert’s geometry and coating work together to control temperature and wear, resulting in longer intervals between interventions and a measurable improvement in total machining efficiency. For manufacturing planners, this means better utilisation of machines and operators, and a quicker return on tooling investment in continuous production environments. Application guidance and recommended use cases This insert is intended primarily for turning applications in steels (ISO P), including unalloyed and alloyed steels where reliable chip formation and edge stability are required. Use the MP6 chipbreaker for general finishing and medium-depth cuts where controlled chips and good surface quality are priorities. For tool selection and cutting data, match the TCMT110308-MP6 WPP20G to holders specified for TCMT inserts and verify seat geometry and clamping method to maintain the designed 7° clearance and ensure the 0.8 mm corner radius functions as intended. If higher toughness or different coatings are needed, consult technical advisors for alternative grades within the Tiger·tec Gold family. For personalised application recommendations or to request availability information on TCMT110308-MP6 WPP20G inserts, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TCMT110308-MP6-WPP20G-WALTER SKU: TCMT110308-MP6-WPP20G-WALTER Product type: Drehwendeschneidplatte / indexable turning insert Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.8 Plate form: Triangle 60° Plate size: 11 Plate thickness: 03 Tolerance class: M Special features Series: Tiger·tec Gold Grade / sort: WPP20G Chipbreaker: MP6 Base designation: TCMT110308-MP6 ISO designation: TCMT110308-MP6 WPP20G Application group: ISO P (steel) FAQ Is this insert suitable for alloyed steels and general steel turning? Yes. The TCMT110308-MP6 WPP20G insert is specified for ISO P materials and is suitable for both unalloyed and alloyed steels where standard turning and finishing are required. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP20G grade increases wear resistance and edge stability, extending service life under typical steel cutting conditions while maintaining consistent surface finish. How does the MP6 chipbreaker affect machining? The MP6 chipbreaker is designed for reliable chip control and stable cut evacuation; it supports improved surface quality and reduces the need for manual chip handling during medium finishing operations. Can the insert be used in standard TCMT toolholders? Yes. The TCMT geometry is a standard indexable insert form and is compatible with toolholders designed for TCMT inserts; correct seating and clamping are required to maintain the specified clearance and radius performance. Walter Tools: Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only and do not imply any affiliation between our company and the trademark holders. The offered item is an original, factory-new product of the manufacturer.
TCMT16T302-FM4 WSM20S FM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver wear resistance, the WSM20S grade designed for stainless steel and superalloys, and a stable FM4 chipbreaker for consistent production results; order directly via Metav Werkzeuge or consult our specialists for machining advice. TCMT16T302-FM4 WSM20S — Triangle 60° insert, Tiger·tec Silver coating | Walter Tools The TCMT16T302-FM4 WSM20S is a coated carbide triangular insert for turning and drilling/boring applications, optimised for stainless steel and heat-resistant superalloys where edge stability and secure chip formation are essential Tiger·tec Silver coating for wear resistance Suitable for stainless steel and superalloys Triangle 60° form with 0.2 mm corner radius FM4 chipbreaker for stable chip control Reliable edge stability for demanding materials The combination of the Tiger·tec Silver coating and the WSM20S grade gives a durable, coated carbide tool body that is tailored to the thermal and mechanical demands of stainless steel and heat‑resistant alloys. This engineered coating reduces flank wear and helps to avoid built‑up edge under tough conditions, so machining runs remain stable for longer. For process planners, the result is improved tool life and fewer interruptions for insert changes, which supports higher overall equipment effectiveness and predictable production cycles. Consistent chips and improved surface quality Built around the FM4 chipbreaker and a 60° triangular geometry, the insert produces controlled, repeatable chip forms that ease chip evacuation and reduce the risk of entanglement in turning and boring operations. The 0.2 mm corner radius supports a fine surface finish in finishing passes while still offering sufficient edge strength for semi‑finishing. Operators benefit from reduced secondary operations and a more consistent part surface, which lowers rework rates and shortens downstream processing times. Geometry and tolerance for dependable integration With a plate size of 16 and a thickness of T3, plus a 7° clearance angle and tolerance class M, this insert integrates smoothly into standard toolholder systems designed for triangular inserts. The three cutting edges per indexable insert provide economical usage and quick indexing when wear begins to affect performance. Because the grade covers material groups S and M, the component is suitable for both high‑temperature alloys and stainless steel, enabling fleet rationalisation and fewer tool variants at the machine. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools Tiger·tec Silver WSM20S inserts or to request a tailored quotation from the Metav Werkzeuge team at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: TCMT16T302-FM4-WSM20S-WALTER Designation: TCMT16T302-FM4 WSM20S Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Facts Plate size: 16 Thickness: T3 Corner radius: 0.2 mm Relief angle: 7° Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WSM20S Chipbreaker: FM4 Plate form: Triangle 60° Material groups: S / M (superalloys, stainless steels) Suitable application: turning and drilling/boring FAQ What materials is this insert best suited for? The TCMT16T302-FM4 WSM20S is designed primarily for stainless steel and heat‑resistant superalloys (material groups M and S), offering thermal stability and secure chip formation. What does the FM4 chipbreaker achieve in practice? The FM4 chipbreaker on this Walter Tools insert promotes controlled chip formation and easier evacuation, which improves process reliability and reduces the risk of chip rework. How does the 0.2 mm corner radius affect finishing? A 0.2 mm corner radius provides a balance between edge strength and surface quality, allowing fine finishes on finishing passes while maintaining sufficient robustness during semi‑finishing. Is this insert compatible with standard triangular toolholders? Yes, the 60° triangular form and T3 plate thickness make this insert compatible with typical toolholders for triangular inserts; tolerance class M supports consistent fit and repeatability. How many usable cutting edges does each insert provide? The triangular geometry offers three indexed cutting edges, enabling economical use and quick indexing when an edge reaches its wear limit. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and imply no affiliation between our company and the named brands. The offered article is an original, factory‑new product from Walter Tools.
TCMT16T302-FP4 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and the FP4 chipbreaker geometry to keep machining predictable and productive; order through Metav Werkzeuge or request specialist advice for optimal tool selection. TCMT16T302-FP4 TCMT16T302-FP4 WPP20G – triangular indexable turning insert, Tiger·tec Gold for steel (Walter Tools) A TCMT16T302-FP4 WPP20G triangular indexable turning insert engineered for steel machining, offering a wear-resistant coated carbide grade and a chipforming geometry for stable production. Triangle 60° insert for robust turning Tiger·tec Gold coated, wear-resistant grade WPP20G FP4 chipbreaker for stable chip formation 0.2 mm corner radius with 7° clearance Longer tool life through a proven coating technology The combination of Tiger·tec Gold coating and the WPP20G grade provides consistent edge stability and extended tool life when machining steels (material group P). The multilayer coating reduces flank and crater wear under the thermal loads typical of steel turning, which means fewer interruptions for insert changes and a more predictable production rhythm. This economy of tool use translates directly into lower unit costs and more consistent component quality. Better component quality thanks to controlled chip formation The FP4 chipbreaker and the 0.2 mm corner radius deliver stable chip control and improved surface finish on turned parts. The geometry is optimised to break and evacuate chips reliably under a range of cutting conditions, reducing the risk of surface marks and tool interference. With a clearance angle of 7°, the insert maintains a secure cutting edge engagement while limiting rubbing — a balance that supports repeatable surface integrity and shorter downstream finishing cycles. Flexible triangular geometry for productive indexing and set-up The triangular 60° form with a 16 mm inscribed circle and a T3 body thickness provides three usable cutting edges per index, enabling economical tool use in batch production or single-part runs. The insert is suitable for both conventional turning and boring operations where a compact, robust geometry is required. As a coated carbide insert, it handles the heat and forces of steel machining effectively and simplifies tooling inventory by covering a broad range of common turning tasks. For tailored application advice on Walter Tools inserts such as the TCMT16T302-FP4 WPP20G, contact Metav Werkzeuge for specification support and quick supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TCMT16T302-FP4-WPP20G-WALTER Item designation: TCMT16T302-FP4 WPP20G Manufacturer: Walter Tools Product type: Indexable turning / boring insert Series: Tiger·tec Gold Grade: WPP20G Dimensions & tolerances Inscribed circle: 16 mm Corner radius: 0.2 mm Clearance angle: 7° Plate thickness: T3 Tolerance class: M Features & applications Coating: Tiger·tec Gold (coated carbide) Chipbreaker: FP4 Shape: Triangle 60° Material application: Steel (P) Execution: T FAQ What materials is this insert suited for? The TCMT16T302-FP4 WPP20G is designed for machining steel (material group P) and is optimised for typical heat and chip behaviour encountered in steel turning. What benefit does the Tiger·tec Gold coating deliver? The Tiger·tec Gold coating on the WPP20G grade improves wear resistance and process stability, giving longer tool life and more consistent cutting performance when turning steel. How does the FP4 chipbreaker help in production? The FP4 chipforming geometry ensures reliable chip control and evacuation, which reduces the chance of surface damage and supports steady-cycle machining with fewer interruptions. How many usable edges does the triangular insert provide? The triangular 60° geometry provides three indexable cutting edges, offering economical edge utilisation and quick re-indexing during production. Is this insert suitable for finishing or roughing operations? With a 0.2 mm corner radius and the WPP20G grade, the insert is suitable for a range of operations from medium finishing to general-purpose turning in steel, depending on cutting parameters and machine stability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original factory-new product from the manufacturer. The Walter AG (marketed as Walter Tools) is part of the Sandvik group.
TCMT16T304-FK6 WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of high process security, optimised chip control and a wear-resistant Tiger‑tec Silver grade for consistent machining of cast iron components; order directly via Metav Werkzeuge or consult our specialists for application advice. TCMT16T304-FK6 WKK10S — Boring/turning indexable insert for cast iron (Walter Tools) The TCMT16T304-FK6 WKK10S is a triangular 60° indexable insert from the Tiger‑tec Silver family, engineered for productive and reliable machining of cast iron in turning and boring operations. Tiger‑tec Silver coating for abrasive cast iron FK6 chipbreaker for controlled chip formation 7° clearance and 0.4 mm corner radius Triangular 60° insert, size 16, thickness T3 Stable chip control to keep production running The combination of the FK6 chipbreaker and the insert geometry delivers predictable chip formation, reducing the risk of chip build-up and improving process repeatability. For manufacturing environments where interrupted cuts and variable cast iron qualities occur, the controlled breakage behaviour supports a steady material removal rate and minimises tool-related stops. This leads to a measurable improvement in machine uptime and simplifies chip handling at the extraction stage. Coating and grade tailored for cast iron abrasion The Tiger‑tec Silver technology and the WKK10S grade are formulated to resist the abrasive wear typical of cast iron. The coated carbide construction provides a balance between surface protection and toughness, which helps to extend tool life under abrasive conditions. In practice, this means fewer insert changes and a more consistent surface finish over longer production runs, supporting efficient, cost-aware machining strategies. Geometry designed for rigidity and versatility The triangular 60° form and the specified dimensions — size 16, thickness T3, 7° clearance and 0.4 mm corner radius — combine to offer stable seating and multiple indexable edges. The insert's form factor is suitable for a variety of boring and turning setups where rigidity and repeatable seat location matter. The modest corner radius provides a compromise between edge strength and the ability to achieve reasonably fine contouring without excessive cutting forces. Practical advantages for workshop workflows As a coated carbide insert from a renowned supplier, this item supports productive machining of cast iron with consistent results. Its targeted design reduces the need for frequent tool intervention and aligns with lean production principles: fewer interruptions, predictable regrinding cycles, and straightforward inventory management for indexable parts. For operations prioritising process security and dependable repeatability, this insert contributes directly to smoother workflow and lower indirect production costs. For application guidance or to secure supply of Walter Tools Tiger‑tec Silver inserts, contact Metav Werkzeuge for tailored recommendations and prompt availability. Technical Data Article number: TCMT16T304-FK6-WKK10S-WALTER Description: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCMT16T304-FK6 WKK10S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKK10S Chipbreaker: FK6 Form: Dreieck 60° Size: 16 Thickness: T3 Clearance angle: 7° Corner radius: 0,4 Tolerance class: M Execution: T Core data Size: 16 Thickness: T3 Clearance: 7° Corner radius: 0,4 Tolerance class: M Special features Coated carbide grade WKK10S Tiger‑tec Silver coating technology Optimised for cast iron (ISO group K) FK6 chipformer for controlled chips Triangular 60° geometry Manufacturer: Walter Tools FAQ Which materials is this insert intended for? The TCMT16T304-FK6 WKK10S insert by Walter Tools is optimised for cast iron (ISO group K), with the grade and coating tuned to resist abrasive wear typical of these materials. What performance benefits does the Tiger‑tec Silver coating provide? Tiger‑tec Silver on the WKK10S grade increases resistance to abrasive wear and helps maintain a stable cutting edge, enabling longer tool life and more consistent surface quality in cast iron machining. How does the FK6 chipbreaker affect machining? The FK6 chipbreaker produces controlled, short chips during cutting, which improves chip evacuation and reduces the likelihood of entanglement, supporting reliable machining cycles with fewer interruptions. What does the 0.4 corner radius mean for component finish? A 0.4 mm corner radius provides a balance between edge strength and the ability to produce reasonably fine contours; it helps avoid fragile edges while still allowing acceptable surface finishes on cast iron parts. Is this insert suitable for turning and boring operations? Yes, the insert is designed for both turning and boring applications where a triangular 60° geometry and robust chip control are required; it fits typical indexable toolholders for these tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT16T304-FK6 WKK20S Wendeplatten - Walter Tools
TCMT16T304-FK6 WKK20S — Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte von Walter Tools Die TCMT16T304-FK6 WKK20S ist eine beschichtete Hartmetall-Wendeplatte der Serie Tiger-tec Silver, entwickelt für produktive Zerspanung von Gusseisen bei stabiler Spanbildung. Hohe Prozesssicherheit durch Tiger-tec Silver Speziell abgestimmt für Gusseisen Bearbeitung Dreieck 60° für vielseitige Einsetzbarkeit Freiwinkel 7° optimiert Spanabfuhr Eckradius 0,4 mm für präzise Schnittkante Höhere Produktivität bei Gussbearbeitung dank beschichtetem Hartmetall Die Kombination aus der WKK20S Schneidstoffsorte und der Tiger-tec Silver Beschichtung reduziert abrasiven Verschleiß beim Drehen von Gusseisen. Dadurch verbessert sich die Standzeit, was insbesondere in Serienfertigung zu geringeren Werkzeugwechseln führt. Diese Wendeplatte ist ideal für Anwendungen, in denen wiederholgenaue Ergebnisse und konstante Bearbeitungsqualität gefragt sind. Erläuterung: Die WKK20S Sorte ist auf die typischen, brechenden Späne von Gusswerkstoffen ausgelegt und sorgt für zuverlässige Spanformergebnisse. Geometrie und Spanformer sorgen für stabile Schnitte und saubere Oberfläche Mit der Dreieck 60° Plattenform und dem Spanbrecher FK6 lässt sich der Span gezielt brechen, was die Oberflächenqualität verbessert und die Standzeit verlängert. Der Freiwinkel 7° bietet eine gute Balance zwischen Schneidkantenstabilität und Spanabfuhr, während der Eckenradius 0,4 mm präzise Schnitte bei wiederholten Einsätzen ermöglicht. Kurz erklärt: Ein Spanbrecher formt den Span so, dass er kontrolliert abfließt und die Werkzeugkante schont. Einfache Integration in bestehende Werkzeugaufbauten Die Plattengröße von 16 mm und die Ausführung T3 ermöglichen den Einsatz in gängigen Plattenhaltern für Bohr- und Drehoperationen. Anwender profitieren von der standardisierten ISO-Bezeichnung TCMT16T304-FK6 WKK20S, die eine unkomplizierte Bestell- und Lagerhaltung erlaubt. Hinweis: Die Toleranzklasse M steht für mittlere Fertigungspräzision und ist geeignet für viele industrielle Einsätze ohne spezielle Feinjustierung. Zielgruppe und Anwendungsfeld Entwickelt für Fertigungsbetriebe und Lohnbearbeiter, die häufig Gusseisen zerspanen, bietet diese Wendeplatte eine wirtschaftliche Lösung für Serien- und Teilefertigung. Werkzeugbeschaffer und Produktionsleiter schätzen die Kombination aus Prozesssicherheit, einfacher Handhabung und guter Standzeit. Für Anwender mit wechselnden Werkstoffen empfiehlt sich die Abstimmung der Schnittdaten zusammen mit der Anwendungstechnik, um das volle Potenzial der Sorte WKK20S auszuschöpfen. Empfehlung: Für zuverlässige Gussbearbeitung die TCMT16T304-FK6 WKK20S von Walter Tools über Metav Werkzeuge beziehen oder eine individuelle Schnittdatenberatung anfordern — Kontakt: info@metav-werkzeuge.com · Tel. +49 2822 7131930 Leistungsmerkmale Artikelnummer: TCMT16T304-FK6-WKK20S-WALTER Marke: Walter Tools Serie: Tiger-tec Silver Fakten Plattengröße: 16 mm Freiwinkel: 7° Eckenradius: 0,4 mm Plattendicke: T3 Besonderheiten Sorte: WKK20S — beschichtetes Hartmetall Plattenform: Dreieck 60° Spanbrecher: FK6 — Spanformer für Gussoptimierung Toleranzklasse: M Ausführung: T Bearbeitbare Werkstoffe: Gusseisen — auf abrasiven Verschleiß und brechende Späne abgestimmt FAQ Welche Werkstoffe lassen sich mit der Platte bearbeiten? Die TCMT16T304-FK6 WKK20S von Walter Tools ist speziell für die Bearbeitung von Gusseisen ausgelegt und bietet hier optimale Spanformung sowie Verschleißresistenz. Wodurch profitiert die Fertigung von Tiger-tec Silver Beschichtung? Die Tiger-tec Silver Beschichtung reduziert abrasiven Verschleiß, verbessert die Standzeit und ermöglicht konstante Ergebnisse bei Serienläufen mit der TCMT16T304-FK6 WKK20S. Ist die Platte für Feinbearbeitung geeignet? Mit einem Eckenradius von 0,4 mm liefert die TCMT16T304-FK6 WKK20S präzise Schnitte; für sehr feine Oberflächen kann die Wahl kleinerer Radien oder spezifischer Schleifprozesse erforderlich sein. Wie unterstützt der Spanbrecher FK6 die Bearbeitung? Der Spanbrecher FK6 formt den Span so, dass er kontrolliert abbricht und abgeführt wird, was die Schnittstabilität erhöht und die Kantenlebensdauer verlängert. Kann die Platte in Standardhalter eingesetzt werden? Ja, die ISO-Bezeichnung TCMT16T304-FK6 WKK20S entspricht gängigen Normen, sodass die Platte in kompatiblen Haltern eingesetzt werden kann. Hersteller: Walter Tools; Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT16T304-FM4 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, secure chip control and precise edge geometry for consistent stainless steel turning; order the insert directly via Metav Werkzeuge or contact our consultants for specification support. TCMT16T304-FM4 WMP20G indexable insert by Walter Tools — Tiger·tec Gold coated, optimised for stainless steel The TCMT16T304-FM20G is a triangular 60° indexable insert for medium to robust machining of stainless steel, combining a Tiger·tec Gold coating with a dedicated FM4 chipbreaker for stable cutting performance. Tiger·tec Gold coating for long tool life Grade WMP20G optimised for stainless steel Triangular 60° insert, 0.4 mm corner radius 7° clearance angle, stable chip control Reliable grade and coating for demanding stainless steel applications The insert uses a Tiger·tec Gold coating on a coated carbide substrate, which supports secure chip formation and reduces the tendency for built-up edge that commonly affects austenitic and other stainless steels. This combination leads to improved cutting-edge life under the medium to robust cutting conditions for which this grade is specified. The material match and coating chemistry aim to maintain cutting performance where heat generation and material adhesion are greater than with general-purpose steels. Geometry engineered for edge stability and surface quality The triangular 60° insert geometry with a 0.4 mm corner radius and 7° clearance provides a stable cutting edge and predictable engagement, while the FM4 chipbreaker promotes controlled chip flow in interrupted or continuous cuts. The nominal plate size and T3 thickness offer mechanical rigidity for consistent results, helping to achieve repeatable surface finish and dimensional stability in serial production. Precise geometry reduces the need for frequent edge changes, supporting productive turning cycles. Ready integration into TCMT tool systems for efficient shopfloor use Designed in the TCMT16T304 format, this indexable tip integrates into corresponding toolholders for straightforward insertion and indexing, enabling fast tool changes and minimal setup time. The WMP20G grade from Walter Tools is intended for reliable performance across a broad stainless steel spectrum, delivering process stability and predictable wear patterns. For workshops seeking to standardise on robust inserts for rostfreier Stahl, this solution supports reduced downtime and simplified tooling logistics. Contact Metav Werkzeuge for specification assistance on Walter Tools Tiger·tec Gold inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored technical advice and rapid order processing Technical data SKU: TCMT16T304-FM4-WMP20G-WALTER ISO designation: TCMT16T304-FM4 WMP20G Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCMT16T304-FM4 WMP20G Walter Tools Numbers / Core technical data Plate size: 16 Plate thickness: T3 Corner radius: 0.4 mm Clearance angle: 7° Plate form: Triangle 60° Chipbreaker: FM4 Special features / Designs Series: Tiger·tec Gold Grade: WMP20G Coating: Tiger·tec Gold (coated carbide) Material application: stainless steel Brand: Walter Tools FAQ Is this insert suitable for machining stainless steel? Yes. The TCMT16T304-FM4 WMP20G is specifically optimised for stainless steel applications and the WMP20G grade supports secure chip formation in such materials. What chip control can be expected with this geometry? The FM4 chipbreaker combined with the triangular 60° geometry provides controlled chip flow and reduced risk of chip entanglement under medium to robust cutting conditions. Which series and coating does this insert belong to? The insert is part of the Tiger·tec Gold series; the coating provides enhanced wear resistance and process reliability for demanding stainless steel turning. How does the corner radius affect the application? A 0.4 mm corner radius offers a compromise between edge strength and surface finish, improving edge stability for heavier cuts while still enabling acceptable surface quality. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; Manufacturer brand: Walter Tools. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT16T304-FM4 WMP20S T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a WMP20S grade designed for rostfreien Stahl, and the FM4 chipbreaker for consistent chip control and extended edge life. Order the insert directly via Metav Werkzeuge or consult the team for application-specific recommendations. TCMT16T304-FM4 WMP20S Triangle 60° turning insert for rostfreien Stahl | Walter Tools TCMT16T304-FM4 WMP20S is a coated carbide turning insert engineered for reliable, medium-to-robust machining of rostfreien Stahl in turning and reaming-adjacent operations. Tiger·tec Silver coating for long tool life WMP20S grade for rostfreien Stahl machining FM4 chipbreaker for stable chip control Triangle 60° insert, 0.4 mm corner radius Proven cutting performance for rostfreien Stahl that reduces downtime The TCMT16T304-FM4 WMP20S insert combines a coated carbide substrate with Tiger·tec Silver technology to resist heat and edge degradation when machining rostfreien Stahl. The combination improves wear resistance and supports a stable cutting edge, which translates into longer intervals between indexings and fewer unplanned tool changes. The WMP20S grade is optimised for the toughness and built-up-edge tendency of rostfreien Stahl, enabling predictable tool life and consistent part quality—key factors for efficient batch production and reduced unit costs. Geometry and chip control explained for reliable process results The triangular 60° geometry provides three usable cutting corners per insert, while the 0.4 mm corner radius balances edge strength and surface finish: a larger radius increases edge robustness; a smaller radius favours finer finishes. The FM4 chipbreaker is designed to produce short, controllable chips in rostfreien Stahl, minimising the risk of entanglement and improving evacuation, especially in semi-finishing and finishing passes. The 7° relief angle reduces rubbing on the flank face and helps maintain dimensional accuracy over longer runs. For users less familiar with insert nomenclature, a chipbreaker is the engineered groove and land pattern on the insert face that shapes how material breaks and evacuates during cutting. Stability, productivity and workshop integration for everyday use Integrating this triangular insert into established toolholders yields immediate process benefits: enhanced edge stability, improved surface integrity of turned parts and fewer interruptions for regrinding or replacement. The Tiger·tec Silver coating and WMP20S grade combine to offer a wide material acceptance within rostfreien Stahl families, increasing flexibility across workpieces without frequent tool changes. Walter Tools’ design focus on process security supports reproducible results and makes the insert a pragmatic choice for job shops and production lines seeking measurable productivity gains. For application-specific cutting data or to confirm compatibility with a selected toolholder, Metav Werkzeuge’s advisers are available to provide technical clarification and help define cutting parameters. For reliable machining of rostfreien Stahl using Walter Tools’ Tiger·tec Silver technology, request tailored cutting data or a machining recommendation from Metav Werkzeuge to optimise cycle times and tool life. Technical data SKU: TCMT16T304-FM4-WMP20S-WALTER Designation: TCMT16T304-FM4 WMP20S Product type: Drill/bore and turning indexable insert / turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WMP20S Core data Relief angle: 7° Corner radius: 0.4 mm Insert size: 16 mm Plate thickness: T3 Insert form: Triangle 60° Special features Coating: Tiger·tec Silver Substrate: Coated carbide Chipbreaker: FM4 Suitable for: rostfreien Stahl Tolerance class: M Execution: T Base designation: TCMT16T304-FM4 FAQ What materials is this insert suited for? The insert is designed primarily for machining rostfreien Stahl; the WMP20S grade and Tiger·tec Silver coating are selected to handle the toughness and heat characteristics of these alloys. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker promotes short, controlled chips when turning rostfreien Stahl, improving chip evacuation and reducing the chance of chip-related interruptions. How many cutting edges are available on this triangle insert? The triangular 60° form provides three indexing positions, offering three cutting corners per insert to extend service life before disposal or regrinding. Will this insert fit standard TCMT toolholders? The designation matches common TCMT holders; however, confirm seat geometry and clamping style with the chosen toolholder to ensure secure mounting and correct cutting geometry. What impact does the 0.4 mm corner radius have on surface finish? A 0.4 mm corner radius improves edge strength and vibration resistance while delivering a balance between robustness and achievable surface finish on rostfreien Stahl. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT16T304-FM4 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of cost-effective reliability, Tiger·tec Silver coating and precise geometry for consistent productivity in stainless and heat-resistant alloys; order the insert via Metav Werkzeuge or consult their specialists for process planning. TCMT16T304-FM4 WSM10S indexable insert — Tiger·tec Silver, FM4 chipbreaker (Walter Tools) A TCMT16T304-FM4 WSM10S indexable insert designed for turning applications in stainless steel and heat‑resistant superalloys, offering robust chip control and high‑temperature stability for demanding production environments Tiger·tec Silver coating for heat resistance WSM10S grade for stainless and superalloys Triangle 60° indexable insert, 0.4 mm corner FM4 chipbreaker for stable chip control High‑temperature performance and material compatibility for secure cutting The coated carbide composition of the WSM10S grade, realised through Tiger·tec Silver technology, is developed specifically for machining stainless steel (ISO group M) and superalloys/titanium (ISO group S). This combination supports reliable chip formation and improves thermal resistance at elevated cutting temperatures, which reduces the risk of edge build‑up and premature wear. For operations that face poor heat conduction or adhesive tendencies in the workpiece, the chosen grade maintains a stable cutting edge and extends productive tool life while sustaining dimensional accuracy. Geometry tuned for consistent surface quality and reduced rework A triangular 60° shape with a 0.4 mm corner radius and a 7° relief angle provides a purposeful balance between strength and finishing capability. The compact geometry and T3 thickness deliver rigidity in interrupted cuts and help maintain a consistent contact zone, lowering chatter and improving surface finish. The FM4 chipbreaker is engineered to control chip flow at common feed ranges for these materials, minimising entanglement and ensuring predictable evacuation. For shops prioritising repeatable part quality, this insert geometry supports fewer secondary operations and shorter cycle times. Productivity benefits and process security in series production Integrating this indexable insert into a stable toolholder system enhances overall process security: fewer tool changes, less scrap and longer continuous runs. The coated surface reduces friction and heat transfer to the cutting edge, translating into longer intervals between insert indexings and fewer machine stoppages. By favouring coated carbide and a targeted chipbreaker, the insert supports operators seeking both throughput and surface integrity in one solution. For tailored recommendations on feeds, speeds and clamping, Metav Werkzeuge’s technical advisers can provide application‑specific guidance to match machine capability and workpiece characteristics. For reliable turning of stainless and heat‑resistant alloys with Walter Tools quality, contact Metav Werkzeuge for application advice and ordering: info@metav-werkzeuge.com, +49 2822 7131930 Technical data SKU: TCMT16T304-FM4-WSM10S-WALTER Designation: TCMT16T304-FM4 WSM10S Brand: Walter Tools Series: Tiger·tec Silver Facts Insert size: 16 Shape: Triangle 60° Corner radius: 0.4 mm Relief angle: 7° Thickness: T3 Tolerance class: M Special features Grade: WSM10S (coated carbide) Chipbreaker: FM4 Coating: Tiger·tec Silver Execution: T Suitable for: stainless steel (M), superalloys / titanium (S) FAQ Which materials is this insert best suited for? The TCMT16T304-FM4 WSM10S insert is optimised for stainless steel and heat‑resistant superalloys/titanium (ISO groups M and S) owing to the WSM10S grade and Tiger·tec Silver coating. How does the FM4 chipbreaker influence machining? The FM4 chipbreaker promotes predictable chip formation and evacuation during turning, reducing the chance of tangled chips and supporting steady productivity with the TCMT16T304-FM4 WSM10S. What advantages does the 0.4 mm corner radius deliver? A 0.4 mm corner radius balances edge strength with surface finish, helping to absorb cutting forces during interrupted cuts and improving part quality without excessive cutting force peaks. Can this insert be used for finishing and semi‑roughing? Yes; the combination of the triangular 60° geometry and the WSM10S grade allows both semi‑roughing and finishing passes, depending on feed and speed selection for the specific application. Is the insert compatible with standard triangular toolholders? The TCMT16T304-FM4 WSM10S follows common indexable insert dimensions for triangle 60° inserts and is compatible with matching triangular pockets and clamping systems designed for this format. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world‑leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, brand‑new product of the manufacturer.
TCMT16T304-FM4 WSM20S Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating and the WSM20S grade delivers reliable edge stability and productive machining of demanding materials; the FM4 chipbreaker supports consistent chip control for uninterrupted processes. Order the TCMT16T304-FM4 WSM20S directly via Metav Werkzeuge or consult the product specialists for application advice. TCMT16T304-FM4 WSM20S indexable insert — Tiger·tec Silver, for rostfreier Stahl & superalloys — Walter Tools TCMT16T304-FM4 WSM20S is an indexable insert engineered for drilling/reaming and turning operations on hard-to-machine materials, optimised for thermal stability and robust cutting-edge performance Tiger·tec Silver coating for thermal stability FM4 chipbreaker for controlled chip flow 0.4 mm corner radius for edge strength Triangle 60° format for versatile turning Suitable for rostfreier Stahl and superalloys Stable cutting performance for demanding materials This indexable insert is designed to provide consistent cutting performance when machining difficult materials. The WSM20S grade, a coated carbide in the Tiger·tec Silver series, is formulated to resist heat and maintain edge integrity, which reduces the risk of built-up edge and unpredictable tool wear. For workshop planners and production engineers, this means fewer interruptions and more predictable cycle times; the FM4 chipbreaker further ensures stable chip formation, improving surface finish and reducing the need for manual chip handling. Coating and grade deliver longer tool life The Tiger·tec Silver coating enhances heat resistance and oxidation protection at the cutting edge. Combined with the WSM20S substrate, the insert achieves a balance between hardness and toughness that is particularly effective on rostfreier Stahl and heat-resistant alloys. Explained simply: the coating acts as a thermal barrier while the substrate provides mechanical support, resulting in extended tool life and fewer insert changes during production runs, which lowers downtime and increases overall process efficiency. Geometry tailored for reliable turning and drilling Geometry plays a decisive role in performance: the triangle 60° shape offers stable positioning in standard tool holders, while the 0.4 mm corner radius supplies extra edge strength for interrupted cuts. A 7° relief angle helps to reduce rubbing and power draw, and the T3 thickness ensures consistent clamping and repeatable machining results. These design choices combine to give machinists a predictable cutting experience and make the insert suitable for a range of operations where robustness and repeatability are required. Practical application guidance and compatibility The insert is suitable for applications classified under ISO groups M and S, covering rostfreier Stahl as well as heat-resistant superalloys and titanium. In practice, this translates to use in industries such as aerospace, energy and specialised medical component machining where materials are challenging and tolerances are tight. When selecting cutting parameters, favour moderate speeds with attention to tool engagement and coolant strategy to exploit the coating’s thermal benefits while maintaining chip control via the FM4 breaker. Contact Metav Werkzeuge for technical sheets, cutting data recommendations or to order TCMT16T304-FM4 WSM20S directly; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: TCMT16T304-FM4-WSM20S-WALTER Description: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCMT16T304-FM4 WSM20S Manufacturer: Walter Tools Material group: S / M Facts Size: 16 mm Relief angle: 7° Corner radius: 0.4 mm Thickness: T3 Shape: Triangle 60° Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WSM20S (coated carbide) Chipbreaker: FM4 Suitable for: rostfreier Stahl, heat-resistant superalloys and titanium depending on geometry Series: Tiger-tec Silver FAQ What materials is this insert best suited for? The TCMT16T304-FM4 WSM20S is optimised for rostfreier Stahl and for heat-resistant superalloys (ISO groups M and S), providing reliable chip control and edge stability on tough materials. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the WSM20S grade improves thermal resistance and oxidation protection, which helps maintain a stable cutting edge and extends insert life under elevated temperatures. Is the FM4 chipbreaker suitable for finishing passes? Yes, the FM4 chipbreaker is designed to produce controllable chips and a consistent surface finish; its geometry balances chip control with the potential for fine finishing when combined with suitable feeds and speeds. What does the 0.4 mm corner radius mean for tool life? A 0.4 mm corner radius provides greater edge strength against mechanical shock and wear, helping to prolong tool life in applications with intermittent cuts or variable engagement. Can this insert be used in standard triangle tool holders? The triangle 60° format is compatible with common indexable insert holders for triangular inserts; ensure the clamping system matches the TCMT designation and thickness T3 for secure seating. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Mention of brand names is for explanatory purposes only and does not imply any affiliation or endorsement. The offered item is an original, factory-new product of the manufacturer. The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group.
TCMT16T304-FM4 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating and the WSM30S grade for secure chip flow and extended tool life when machining stainless steel and superalloys; order directly via Metav Werkzeuge or consult our specialists for application support. TCMT16T304-FM4 WSM30S turning/boring indexable insert, Tiger·tec Silver — Walter Tools A TCMT16T304-FM4 WSM30S indexable insert designed for hard-to-machine materials, optimised for turning and bore-enlargement operations on stainless steel and heat-resistant alloys. Tiger·tec Silver coating for extended tool life WSM30S grade for stainless steel and superalloys Triangle 60° form with r0.4 corner radius FM4 chipbreaker for controlled swarf removal Consistent performance on stainless steel and superalloys The combination of the WSM30S grade and Tiger·tec Silver coating delivers a balance of wear resistance and thermal stability that benefits long production runs. Specifically developed for applications in group M (stainless steel) and S (heat‑resistant superalloys and titanium), this insert supports a stable cutting edge at elevated temperatures. The result is reduced notch wear and more predictable component quality, which helps maintain cycle times and lowers scrap rates. Reliable chip control for uninterrupted machining Equipped with the FM4 chipbreaker, the insert enables controlled swarf formation and evacuation in interrupted and continuous cuts. Good chip control reduces the risk of re-cutting and tool damage, contributing to steady process behaviour in automated turning centres. The geometry and chipbreaker design combine to ease chip flow even when working with sticky or work‑hardening stainless steel, improving surface finish and reducing secondary operations. Precision geometry that supports repeatable tolerances The triangle 60° shape with r0.4 corner radius and a 7° free angle provides a robust cutting edge suitable for medium‑to‑heavy cuts while maintaining dimensional stability. The tolerance class M ensures consistent seat fit and repeatable positioning in toolholders, aiding reproducible part accuracy across batches. Users benefit from predictable tool life and simplified tool changeovers, which are essential for high‑mix, medium‑volume production environments. Practical handling and compatibility on the shop floor With a nominal size of 16 mm and T3 thickness, the insert integrates with standard triangular indexable housings for turning and boring heads. The indexable insert concept reduces setup time and inventory complexity: a single insert position offers multiple usable corners, lowering per‑edge costs. For workshops aiming to consolidate tooling, the Walter Tools Tiger·tec Silver range provides a pragmatic option that balances economy and performance. For machining stainless steel and demanding superalloys with proven stability, contact Metav Werkzeuge for product availability and application advice — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the TCMT16T304-FM4 WSM30S and suitable toolholder options Technical Data Article number: TCMT16T304-FM4-WSM30S-WALTER Designation: TCMT16T304-FM4 WSM30S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM30S Dimensions & Key Numbers Size: 16 mm Corner radius: 0.4 mm Free angle: 7° Thickness: T3 Plate form: Triangle 60° Tolerance class: M Features & Applications Coating: Tiger·tec Silver Chipbreaker: FM4 Suitable for: stainless steel (ISO group M) Suitable for: heat-resistant superalloys and titanium (ISO group S) Application: turning, bore enlargement, indexable insert use FAQ What materials is this insert suitable for? The TCMT16T304-FM4 WSM30S insert from Walter Tools is specified for stainless steel (ISO group M) and for heat‑resistant superalloys/titanium (ISO group S), providing thermal stability and edge strength for these challenging materials. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker on the TCMT16T304-FM4 WSM30S supports controlled chip formation and evacuation, which improves surface finish and reduces the chance of re‑cutting chips during turning and boring operations. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WSM30S grade enhances wear resistance and heat management, extending tool life and maintaining consistent edge integrity under higher cutting temperatures. Is the insert compatible with standard triangular toolholders? Yes, the triangle 60° form and tolerance class M ensure compatibility with common triangular insert seats; the TCMT16T304-FM4 WSM30S fits standard indexable housings for turning and bore‑enlargement. What corner radius and geometry should be expected for finish or roughing? With an r0.4 corner radius and a 7° free angle, the TCMT16T304-FM4 WSM30S offers a compromise between strength and finish; it is suitable for medium cuts and can be used for both semi‑finish and productive roughing strategies depending on cutting data. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
TCMT16T304-FM6 WSM20S FM6 Wendeplatten - Walter Tools
Benefit from the combination of WSM20S carbide grade, FM6 chip control and compact triangle geometry for dependable machining of rust‑resistant steels; order the insert directly via Metav Werkzeuge or consult our application specialists for tailored cutting data. TCMT16T304-FM6 WSM20S indexable turning insert – FM6 chipbreaker, Tiger·tec Silver (Walter Tools) The TCMT16T304-FM6 WSM20S is an indexable turning insert designed for reliable machining of stainless steels and heat‑resistant superalloys in demanding turning operations. Tiger·tec Silver coating for high process security Grade WSM20S for stainless and heat‑resistant alloys Triangle 60° form with 0.4 mm nose radius 7° clearance angle, T3 plate thickness Consistent chip control when machining difficult materials The insert’s WSM20S grade, part of the Tiger·tec Silver series, is formulated for materials that generate heat and tend to work‑harden. This leads to stable chip formation and helps avoid built‑up edge, which in turn reduces unscheduled downtime. The coated carbide substrate improves thermal resistance and wear behaviour so that the cutting edge maintains its geometry for longer. For production environments that demand reproducible results, this combination delivers measurable gains in process reliability and component quality. Geometry that supports surface finish and dimensional accuracy A triangle 60° plate form with a 0.4 mm nose radius provides a predictable cutting edge for both light finishing passes and more demanding semi‑finishing work. The FM6 chipbreaker is optimised to break and evacuate chips from the cutting zone, reducing the risk of surface defects and improving tool stability. The modest clearance of 7° and the T3 plate thickness ensure secure clamping in standard indexable toolholders while minimising vibration—advantages that translate directly into improved surface quality and repeatable dimensions. Productivity and tool life for cost‑efficient batch production Designed for high‑duty cycles in rust‑resistant steels and superalloys, the insert balances cutting-edge robustness with predictable wear behaviour. The coated surface reduces thermal and abrasive wear, contributing to long tool life and fewer indexings per component batch. This reliability supports shorter cycle times and lower per‑part tooling costs across repetitive production runs. Choosing coated carbide inserts like this one typically reduces changeover frequency and increases effective machine availability. Practical application notes and compatibility The insert is suitable for a range of turning tasks on conventional and CNC lathes where stainless steels and heat‑resistant alloys are present. Its ISO designation ensures compatibility with standard triangular indexable holders sized for 16 mm plates. While specific cutting parameters depend on the workpiece alloy, machine rigidity and coolant strategy, the geometry and chipbreaker make the insert a versatile choice for both roughing and controlled finishing. For exact process windows and recommended feeds and speeds, consult the technical advisors at Metav Werkzeuge. Contact Metav Werkzeuge today for tailored machining advice and to secure the Walter Tools TCMT16T304‑FM6 WSM20S insert for demanding stainless and superalloy turning tasks Technical Data SKU: TCMT16T304-FM6-WSM20S-WALTER ISO designation: TCMT16T304-FM6 WSM20S Name: Indexable turning insert (Drehwendeschneidplatte) TCMT16T304-FM6 WSM20S Manufacturer: Walter Tools Facts Clearance angle: 7° Nose radius: 0.4 mm Plate size: 16 mm Plate form: Triangle 60° Plate thickness: T3 Tolerance class: M Special features Grade: WSM20S (Tiger·tec Silver coated carbide) Chipbreaker: FM6 Series: Tiger‑tec Silver Material suitability: S / M (heat‑resistant superalloys / stainless steels) Product type: Indexable turning insert FAQ What materials is this insert designed for? The TCMT16T304‑FM6 WSM20S insert is formulated for stainless steels and heat‑resistant superalloys (ISO groups M and S), offering thermal stability and controlled chip formation. How does the FM6 chipbreaker influence machining? The FM6 geometry promotes consistent chip segmentation and evacuation, improving surface integrity and reducing the chance of built‑up edge when machining tough alloys. Is the insert compatible with standard triangular toolholders? Yes, the insert’s 60° triangle form and 16 mm size fit standard indexable toolholders designed for triangular plates of that dimension. What are the expected benefits of the Tiger·tec Silver coating? The Tiger·tec Silver coating enhances wear resistance and thermal stability, which contributes to longer cutting edge life and more consistent production results with difficult‑to‑machine materials. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT16T304-FM6 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of a proven combination of edge stability and heat-resistant performance for reliable turning in stainless steel and high-temperature alloys; the coated carbide grade delivers predictable chip formation and long tool life. Order supply or request technical advice directly via Metav Werkzeuge for efficient tool integration. TCMT16T304-FM6 WSM30S indexable turning insert, Tiger·tec Silver – Walter Tools TCMT16T304-FM6 WSM30S is an indexable turning insert optimised for machining stainless steel and heat-resistant superalloys in demanding turning operations Tiger·tec Silver coated carbide for high temperatures Chipbreaker FM6 for controlled chip formation Triangular 60° geometry for multiple indexing 7° clearance angle for secure cutting action Consistent edge stability for demanding materials The insert is manufactured in a coated carbide grade from the Tiger·tec Silver family, providing improved resistance to thermal load and flank wear. This composition promotes stable chip formation when cutting tough alloys and stainless steel (ISO group M), reducing the risk of built-up edge and unexpected tool changes. The combination of coating and substrate results in a more predictable flank-life curve, which supports higher productive uptime and fewer unscheduled interventions. Geometry engineered for repeatable turning cycles A triangular 60° shape with a corner radius of 0.4 mm and 7° clearance means the insert offers both indexability and form consistency. The three-index design increases usable cutting edges per insert, while the defined corner radius supports light profiling and general turning without compromising edge strength. Thickness designation T3 and a nominal 16 mm inscribed size provide mechanical stability in standard toolholders, translating into steady cutting forces and repeatable part quality. Chip control and process security for high-temperature cutting The FM6 chipbreaker has been chosen to balance chip segmentation and evacuation under elevated cutting temperatures typical of stainless steel and nickel-base alloys. Effective chip control reduces contact time between chips and the cutting edge, lowering heat transfer and minimising the likelihood of surface damage. As a result, component finish and cycle time remain consistent, supporting lean production and lower scrap rates on serial turning operations. Practical application guidance for tool selection Suitable for ISO groups M (stainless steels) and S (superalloys/titanium), this insert is best applied where thermal resistance and edge robustness are priorities. For newcomers: a chipbreaker defines how chips are split and guided away from the cutting zone; a coated carbide grade combines a hard substrate with thin protective layers to withstand abrasion and thermal loads. Integrating this insert into an appropriately rated holder and using stable clamping is essential to exploit the grade’s full potential. For reliable machining of stainless steel and heat-resistant alloys with Tiger·tec Silver performance, contact Metav Werkzeuge for tailored recommendations or to secure supply of Walter Tools inserts via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TCMT16T304-FM6-WSM30S-WALTER Product designation: TCMT16T304-FM6 WSM30S Product type: Drehwendeschneidplatte Facts Clearance angle: 7° Corner radius: 0.4 mm Inscribed size: 16 mm Thickness: T3 Special features Series: Tiger·tec Silver Grade: WSM30S Chipbreaker: FM6 Shape: Triangle 60° Material designation: S / M Execution: T FAQ What materials is this insert suitable for? The TCMT16T304-FM6 WSM30S insert from Walter Tools is designed for stainless steel (ISO group M) and heat-resistant superalloys/titanium (ISO group S), offering thermal stability and reliable chip formation. How does the FM6 chipbreaker affect performance? The FM6 chipbreaker on the Walter Tools insert promotes segmented chips and controlled evacuation, which reduces heat build-up at the cutting edge and supports consistent surface finish in turning. What does the corner radius 0.4 mm mean for part finishing? A 0.4 mm corner radius on the insert provides a compromise between edge strength and surface finish, enabling light profiling and general turning while maintaining edge robustness for repeated indexing. Can this insert be used in standard turning holders? Yes, the triangular 60° form and T3 thickness are compatible with common toolholders designed for indexable turning inserts; correct clamping and holder rigidity are recommended for optimal results. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com The Walter AG (brand appearance: Walter Tools) is part of the Sandvik group. Protected trademarks and product names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com