TCMT16T304-FP4 WKP01G Wendeplatten - Walter Tools
Take advantage of the proven wear resistance of the Tiger·tec Gold grade together with the FP4 chipbreaker and 60° triangular form for reliable production performance; order directly via Metav Werkzeuge or consult our specialists for application support. TCMT16T304-FP4 WKP01G turning/boring indexable insert — Tiger·tec Gold for steel & cast iron | Walter Tools A TCMT16T304-FP4 WKP01G indexable insert engineered for precise external turning and boring operations in steel and cast iron. Tiger·tec Gold coating for enhanced wear resistance Optimised FP4 chipbreaker for consistent chips Designed for steel and cast iron applications Triangle 60° form with 0.4 mm corner radius 7° clearance angle for secure cutting geometry High-process reliability and longer tool life for demanding steels The Tiger·tec Gold technology combined with the WKP01G grade delivers a coated carbide substrate optimised for the thermal and mechanical stresses of steel machining. This results in improved wear resistance and stable flank life, which in turn reduces unplanned tool changes and supports higher tool life in serial production. The result is measurable improvement in cycle-time consistency and overall productivity when machining unalloyed and alloyed steels as well as many cast-iron grades according to ISO classifications. Stable cutting geometry for repeatable surface quality The triangular 60° form with a 0.4 mm corner radius and a 7° clearance angle provides a robust cutting edge that balances strength and surface finish. The FP4 chipbreaker is designed to produce controllable, short chips on interrupted and continuous cuts, improving chip flow and workpiece surface. A suitably chosen corner radius enhances component integrity while reducing vibration risk; the geometry therefore supports repeatable tolerances and a consistent finish on turned parts, even under varying cut conditions. Seamless integration into production and easy handling As an indexable insert, the TCMT16T304-FP4 WKP01G is compatible with standard toolholder systems and the triangular 60° form allows three usable cutting edges per insert, lowering per-edge cost. The plate thickness T3 and tolerance class M ensure stable clamping and repeatable seating in the toolholder. For workshops seeking balance between performance and economy, this insert offers straightforward replacement, predictable wear behaviour and reliable chip control—factors that reduce downtime and simplify inventory management. For reliable, repeatable turning with Walter Tools' Tiger·tec Gold technology, contact Metav Werkzeuge for tailored advice and order handling at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TCMT16T304-FP4-WKP01G-WALTER Designation: TCMT16T304-FP4 WKP01G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WKP01G Chipbreaker: FP4 Shape: Triangle 60° Size: 16 Thickness: T3 Execution: T Tolerance class: M Core specifications Corner radius: 0.4 mm Clearance angle: 7° Plate size: 16 mm Thickness: T3 Tolerance: M Materials & features Suitable for: steel (P) and cast iron (K) Coated carbide insert Triangle 60° form, three cutting edges Optimised for controlled chip formation Designed for turning and boring applications FAQ What materials can this insert machine effectively? The TCMT16T304-FP4 WKP01G is designed for machining steel (P) and cast iron (K) in accordance with ISO material groupings, providing reliable wear behaviour on these substrates. How does the FP4 chipbreaker influence machining? The FP4 chipbreaker produces short, controlled chips and improves chip evacuation, which benefits surface finish and reduces the risk of chip entanglement during turning with the TCMT16T304-FP4 WKP01G insert. Is the 0.4 mm corner radius suitable for finishing passes? A 0.4 mm radius offers a compromise between cutting-edge strength and achievable surface finish; it is suitable for general finishing and semi-finishing while improving edge robustness. How many cutting edges are available per insert and what is the benefit? The triangular 60° form provides three usable cutting edges per insert, which reduces tooling cost per edge and simplifies inventory management in series production. What tolerance and clamping stability can be expected? The insert is produced to M tolerance class and a T3 thickness, ensuring consistent seating in standard toolholders and reliable clamping stability for repeatable turning results. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. There is no connection between our company and the mentioned brands. The offered item is original, factory-new goods from the manufacturer.
TCMT16T304-FP4 WPP10G Wendeplatten - Walter Tools
Choose a high-performance combination of grade and geometry for efficient steel turning: the Tiger·tec Gold WPP10G grade provides reliable wear resistance while the triangular 60° form with a 0.4 mm corner radius ensures consistent edge strength and long tool life; order specification and application advice are available via Metav Werkzeuge for production-ready integration. TCMT16T304-FP4 WPP10G triangular 60° turning insert for steel – Walter Tools The TCMT16T304-FP4 WPP10G is a triangular 60° indexable insert with Tiger·tec Gold coating, engineered for productive and repeatable steel turning operations. Tiger·tec Gold coated grade WPP10G Triangle 60° with 0.4 mm corner radius Chipbreaker FP4 for controlled chip formation Relief angle 7° for stable cutting edge Increase process output with wear-resistant Tiger·tec Gold The combination of Tiger·tec Gold coating and the WPP10G carbide grade is designed for high productivity in steel machining (ISO P). The coated carbide composition provides improved resistance to abrasive wear and thermal loading, which translates into longer cutting intervals and fewer tool changes. As a result, cycle times are reduced and machining processes become more predictable. This grade is particularly suitable where a balance between durability and versatility is required, delivering consistent performance across a wide range of steel alloys. Reliable chip control and improved surface quality The embedded chipbreaker FP4 works with the insert’s triangle 60° geometry and 0.4 mm corner radius to promote favourable chip formation and evacuation. Controlled chips reduce risk of re-cutting and protect the machined surface, so that a superior finish is achieved without sacrificing material removal rates. The 7° relief angle supports stable engagement at typical turning depths, while the insert form contributes to secure edge strength during interrupted cuts or higher feed applications. Seamless fit into standard turning toolholders and workflows Dimensioned as a standard geometry insert (16 mm size, thickness T3) with tolerance class M, this indexable insert is compatible with widely used clamping systems and toolholder families. The designation and chipbreaker selection simplify grade matching for different steel groups, enabling consistent tool-life planning and inventory control. When specified as TCMT16T304-FP4 WPP10G, the component is ready for direct use in production setups where reproducible results and process stability are a priority. For application-specific recommendations on Walter Tools' Tiger·tec Gold WPP10G inserts and to arrange supply via Metav Werkzeuge, please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TCMT16T304-FP4-WPP10G-WALTER Designation: TCMT16T304-FP4 WPP10G Product type: Turning/indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Core specifications Plate size: 16 mm Corner radius: 0.4 mm Relief angle: 7° Plate thickness: T3 Geometry: Triangle 60° Tolerance class: M Materials & features Carbide grade: WPP10G (coated carbide) Coating: Tiger·tec Gold Chipbreaker: FP4 Application group: ISO P (steel) Suitable for a wide range of steel alloys FAQ What materials are suitable for this insert? The TCMT16T304-FP4 WPP10G insert is specified for ISO P materials and is optimised for turning different steel grades. How does the FP4 chipbreaker affect performance? The FP4 chipbreaker on this Walter Tools insert promotes consistent chip formation, aiding evacuation and improving surface finish during steel turning. Is the insert compatible with standard TCMT toolholders? Yes, the TCMT16T304-FP4 WPP10G follows standard TCMT geometry and tolerance class M, ensuring compatibility with common turning toolholders. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating enhances wear resistance and thermal stability of the coated carbide, resulting in extended tool life and more predictable machining performance. Which corner radius and relief angle are specified? This triangular insert features a 0.4 mm corner radius and a 7° relief angle, offering a balance between edge strength and cutting performance. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used here for explanatory purposes only and indicate no association between our company and the trademark owners. The offered item is original and factory-new.
TCMT16T304-FP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the proven combination of a Tiger·tec Gold grade and a precise FP4 chipbreaker to achieve stable, economical turning in steel; the geometry and coating together support consistent cutting performance and longer tool life. Order or request technical advice via Metav Werkzeuge for application-specific recommendations. TCMT16T304-FP4 WPP20G Triangle indexable insert with Tiger·tec Gold grade — Walter Tools The TCMT16T304-FP4 WPP20G is a triangle 60° indexable insert designed for turning and boring applications in steel (ISO P), offering a balanced mix of wear resistance and toughness for versatile workshop tasks. Tiger·tec Gold coated grade WPP20G FP4 chipbreaker for stable chip control 0.4 mm corner radius for edge robustness Triangle 60° insert, size 16 mm Increased process reliability for steel turning The Tiger·tec Gold coating in combination with the WPP20G grade provides a coated carbide chemistry optimised for the heat and chip characteristics of steel (ISO P). This results in reduced flank wear and a more consistent cutting edge life compared with uncoated grades. For production environments, that means fewer insert changes and a more predictable tool-replacement rhythm, which supports efficient shop-floor planning and lower overall tooling costs. Predictable chip control and improved surface finish The FP4 chipbreaker has been developed to manage chip formation during general turning of steels, promoting uniform chip shape and evacuation. Better chip control reduces the risk of chip re-cutting and tool edge damage and contributes directly to a better surface quality on the workpiece. In practice, stable chips support uninterrupted cycles and minimise secondary operations caused by poor finishes. Robust geometry for demanding operations The triangular 60° form and 0.4 mm corner radius deliver a reliable balance between strength and cutting performance. A 7° relief angle helps maintain cutting stability while the T3 thickness adds mechanical robustness under varying cutting forces. The insert’s tolerance class M ensures consistent seating and repeatable positioning in standard indexable holders, reducing setup variance and improving repeatability across batches. Practical advantages for workshop efficiency As a universal grade for steel, this insert reduces the number of separate grades required in inventory, simplifying stock management and speeding up tool selection. The combination of a versatile coated grade and a proven chipbreaker means fewer process adjustments when switching between similar steels. For procurement and application queries, Metav Werkzeuge can provide targeted recommendations to match holder types and cutting parameters to specific machining tasks. For application guidance or to request a quotation for the Walter Tools TCMT16T304-FP4 WPP20G insert, contact Metav Werkzeuge for fast technical advice and tailored recommendations at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TCMT16T304-FP4-WPP20G-WALTER Designation: TCMT16T304-FP4 WPP20G Product type: Indexable insert / turning and boring insert Brand: Walter Tools Facts Insert size: 16 mm Corner radius: 0.4 mm Relief angle: 7° Shape: Triangle 60° Thickness: T3 Tolerance class: M Special features Grade: WPP20G (Tiger·tec Gold) Chipbreaker: FP4 Coated carbide, universal for steel (ISO P) Application: Steel machining FAQ Which materials is this insert suitable for? The TCMT16T304-FP4 WPP20G is formulated for steel (ISO P) machining; the grade and coating address the thermal and chip-forming conditions typical of unalloyed and alloyed steels. What are the main benefits of the Tiger·tec Gold WPP20G grade? The Tiger·tec Gold WPP20G grade provides a balance of wear resistance and toughness that supports extended edge life and consistent cutting behaviour when machining steels. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker promotes stable chip formation and efficient evacuation, which helps protect the cutting edge and improves surface integrity during turning operations. Is the insert geometry suitable for heavy cuts? The triangle 60° geometry with a 0.4 mm corner radius offers good edge strength; combined with the T3 thickness and 7° relief angle, it is designed to withstand typical turning forces encountered in steel machining. Can this insert be used across different steel grades without frequent changes? Yes — the universal character of the WPP20G grade makes it suitable for a range of steels, helping to reduce the number of grades stocked and simplifying tool selection. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT16T304-FP6 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold wear resistance and the FP6 chipbreaker for consistent chip control and longer tool life in steel turning; order directly via Metav Werkzeuge or contact our advisors for application support. TCMT16T304-FP6 WPP20G – Turning and boring indexable insert, FP6 chipbreaker, Tiger·tec Gold (Walter Tools) The TCMT16T304-FP6 WPP20G is a triangular 60° indexable insert engineered for efficient steel turning and light boring tasks, featuring a 7° relief angle and a 0.4 mm nose radius for robust performance. Tiger·tec Gold coated carbide grade WPP20G FP6 chipbreaker for reliable chip control Triangular 60° format, 0.4 mm nose radius 7° relief angle, suitable for steel (ISO P) Increased productivity through optimised coating and grade The combination of the Tiger·tec Gold coating and the WPP20G cutting grade delivers measurable gains in productivity when machining steel. The coating reduces flank wear and improves heat resistance, which leads to extended tool life and fewer insert changes. With the FP6 chipbreaker, chip formation is stabilised across typical feeds for steel, reducing the need for operator intervention and lowering downtime. This results in a clearer cost-per-part advantage and steadier process parameters for series production. Precise geometry for consistent surface finish A 60° triangular layout and a 0.4 mm nose radius create a stable cutting geometry that balances edge strength with the ability to achieve fine surface finishes. The 7° relief angle supports secure cutting edge engagement while limiting rubbing and built-up edge in steel applications, and the declared tolerance class M ensures repeatable seating and indexing in compatible toolholders. These geometric choices translate directly into predictable component quality and reduced rework rates. Reliable selection for steel machining operations Designed primarily for ISO P materials, the insert is tailored to the thermal and chip-formation characteristics of unalloyed and alloyed steel. The coated cemented-carbide construction provides resistance to abrasive wear common in high-volume turning, and the FP6 chipbreaker assists with controlled swarf evacuation in through-cut and light-bore scenarios. For workshops aiming to maintain throughput without sacrificing surface integrity, the insert offers a dependable balance of life and performance. Practical benefits for production planning Using this triangular insert format simplifies inventory and tool-change routines: one geometry covers a range of turning tasks while the robust grade reduces frequency of replacements. The plate’s 16 format and T execution fit standard TCMT pockets, allowing straightforward integration into existing tool systems. For process engineers, the net effect is greater machine uptime and simplified tool management, contributing to overall process stability and predictable production costs. For robust, process-secure steel turning specify Walter Tools’ Tiger·tec Gold WPP20G inserts through Metav Werkzeuge and request tailored application advice from our specialists at Metav Werkzeuge. Technical Data Article number: TCMT16T304-FP6-WPP20G-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCMT16T304-FP6 WPP20G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP20G Format: Dreieck 60° Size: 16 Relief angle: 7° Corner radius: 0.4 Chipbreaker: FP6 Plate thickness: T3 Tolerance class: M Execution: T Facts Size designation: 16 Corner radius: 0.4 mm Relief: 7° Thickness code: T3 Tolerance: M Special features Coating technology: Tiger·tec Gold Coated cemented-carbide grade WPP20G Suitable material group: steel (ISO P) Chip control: FP6 chipbreaker Plate geometry: triangular 60° Application: turning and light boring operations Plate designation: TCMT16T304-FP6 FAQ What materials is this insert suitable for? The TCMT16T304-FP6 WPP20G is designed primarily for steel (ISO P) machining and performs well on unalloyed and alloyed steels thanks to the Tiger·tec Gold coating and the WPP20G grade. How does the FP6 chipbreaker influence performance? The FP6 chipbreaker promotes controlled chip formation and evacuation during turning, improving process stability and reducing the risk of chip-related interruptions when using the insert. What does the 0.4 mm nose radius mean for surface finish? A 0.4 mm nose radius offers a compromise between edge strength and the ability to achieve a smooth surface finish; it supports dimensional stability while providing adequate robustness for standard turning feeds. Can this insert be used in standard TCMT pockets? Yes, the TCMT16T304-FP6 format corresponds to common TCMT-style pockets and can be integrated into typical turning toolholders for straightforward replacement and indexing. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, brand-new goods from the manufacturer.
TCMT16T304-FW4 WPP10G Wendeplatten - Walter Tools
Take advantage of a durable, high-performance turning solution that combines the Tiger·tec Gold coating with a robust FW4 chipbreaker for consistent steel machining; benefit from predictable tool life and reliable chip control. Order directly via Metav Werkzeuge or consult our specialists for application support. TCMT16T304-FW4 WPP10G turning insert — Tiger·tec Gold, for steel, Walter Tools TCMT16T304-FW4 WPP10G is an indexable turning insert designed for efficient machining of steels, combining a coated carbide grade with a controlled-chip geometry Tiger·tec Gold coated grade WPP10G Optimised for steel (ISO P) FW4 chipbreaker for stable chips Triangle 60° for secure clamping Long-lasting performance for demanding steel turning The WPP10G grade, belonging to the Tiger·tec Gold family, is a coated carbide solution developed to balance wear resistance and toughness for steel machining. Its microstructure and coating technology are tuned to withstand the heat and chip formation typical of ISO P materials, delivering extended tool life and consistent surface finish. The designation TCMT16T304 identifies the standard geometry that fits a wide range of toolholders, allowing predictable cutting behaviour across production batches. As a result, process planners can count on fewer tool changes and steadier cycle times, improving overall shop-floor efficiency. Precise chip control and edge integrity for safer machining Equipped with the FW4 chipbreaker and a triangle 60° plate form, the insert promotes controlled chip shapes that reduce entanglement and support stable turning operations. The geometry includes a 7° relief angle that helps reduce rubbing on the flank and a 0.4 mm corner radius that balances edge strength with surface quality. Together, these features reduce the likelihood of interrupted cuts and minimise the risk of poor finishes on workpieces, which contributes to lower scrap rates and less rework in small-batch and serial production alike. Simple integration and predictable results for production use The insert is supplied in the standard TCMT format with a T3 plate thickness and a nominal size of 16, making it compatible with common turret and toolholder systems. Its tolerance class M ensures dimensional reliability for repeatable clamping and cutting. For manufacturing engineers focused on process stability, the combination of a reliable coating system and a proven chipbreaker geometry delivers measurable improvements in productivity and component consistency. If additional technical data or cutting parameters are required for specific steels, the team at Metav Werkzeuge can provide tailored recommendations and cutting trial advice. Choose the Walter Tools TCMT16T304-FW4 WPP10G insert for robust, efficient steel turning and contact Metav Werkzeuge for precise application support: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: TCMT16T304-FW4-WPP10G-WALTER Label: Drehwendeschneidplatte TCMT16T304-FW4 WPP10G Walter Tools Product type: turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP10G Numbers / Core technical data Size: 16 Plate thickness: T3 Corner radius: 0.4 mm Relief angle: 7° Tolerance class: M Designs / Special features Chipbreaker: FW4 Plate form: Triangle 60° Coating: Tiger·tec Gold (coated carbide) Material application: Steel (ISO P) FAQ What steels is this insert suitable for? The TCMT16T304-FW4 WPP10G insert from Walter Tools is optimised for machining steels (ISO P) and offers a balanced combination of wear resistance and toughness for typical steel grades. How does the FW4 chipbreaker affect machining? The FW4 chipbreaker produces controlled chip forms that improve evacuation and reduce chip-related interruptions, enhancing process stability with the TCMT16T304-FW4 insert. Can this insert be used for finishing and light turning? Yes, the 0.4 mm corner radius and the coated grade make the insert suitable for operations where a good surface finish and reliable edge life are required. Which toolholders are compatible with this insert form? The TCMT geometry is a common standard for indexable turning inserts and fits most toolholders designed for triangular TCMT plates; verify holder compatibility with the insert designation. What are the main benefits of the Tiger·tec Gold coating? Tiger·tec Gold enhances wear resistance and thermal stability, which results in longer tool life and more consistent results when turning steels with the TCMT16T304-FW4 WPP10G insert. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only; there is no connection between our company and the named brands. The offered item is original, brand-new goods from the manufacturer, Walter Tools.
TCMT16T304-FW4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WPP20G grade and a precise 0.4 mm corner radius for stable chip control and extended tool life; order the insert via Metav Werkzeuge or consult their specialists for machining recommendations. TCMT16T304-FW4 WPP20G indexable turning insert (for Stahl) — Tiger‑tec Gold by Walter Tools A TCMT16T304-FW4 WPP20G indexable turning insert designed for reliable Stahl machining with a 7° relief angle and the FW4 chipbreaker Coated carbide Tiger‑tec Gold for reliable wear resistance Optimised FW4 chipbreaker for controlled chip formation 7° relief angle for secure cutting edge engagement Triangle 60° shape with 0.4 mm corner radius High-performance cutting for demanding Stahl machining The combination of the Tiger‑tec Gold coating and the WPP20G carbide grade delivers a balanced mix of wear resistance and toughness that suits a wide range of Stahl applications. The coating reduces flank wear and supports higher cutting speeds, while the substrate of the insert provides shock resistance where intermittent cuts occur. Explained simply, the coating acts as a protective layer that delays wear mechanisms, which leads to longer in‑tool life and fewer indexings. This results in improved process economy and more consistent cycle times on production lathes. Precision geometry for consistent surface quality A triangle 60° geometry with a 0.4 mm corner radius and a 7° relief angle produces predictable cutting forces and good dimensional stability. The medium tolerance class (M) ensures repeatable part accuracy across batches, and the compact plate size (16 mm) with thickness T3 is suited to many standard indexable toolholders. The modest corner radius supports a good surface finish without excessive radial loading, meaning fewer rejects and reduced rework. In practice, this geometry helps maintain concentricity and a uniform surface texture on turned parts. Controlled chips and reliable process integration The FW4 chipbreaker is engineered for steady chip formation when machining typical Stahl grades, producing short, segmented chips that are easy to evacuate and handle at the machine. Combined with the insert’s coated surface, the chip control reduces adhesion and the risk of built‑up edge, supporting uninterrupted production and lower machine downtime. The designation TCMT16T304-FW4 WPP20G fits conventional toolholders designed for TCMT geometry, enabling straightforward integration into existing tooling systems and streamlined inventory management. Speak to Metav Werkzeuge for tailor‑made machining guidance, availability and ordering of Walter Tools inserts — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: TCMT16T304-FW4-WPP20G-WALTER Article: TCMT16T304-FW4 WPP20G Brand: Walter Tools Series: Tiger‑tec Gold Grade: WPP20G Application: Stahl (P) Core specifications Relief angle: 7° Corner radius: 0.4 mm Plate size: 16 mm Geometry: Triangle 60° Thickness: T3 Tolerance class: M Special features Coating: Tiger‑tec Gold (coated carbide) Chipbreaker: FW4 Designation without grade: TCMT16T304-FW4 ISO designation: TCMT16T304-FW4 WPP20G FAQ What materials is this insert suitable for? This insert is specified for Stahl (ISO group P); the WPP20G grade and Tiger‑tec Gold coating are optimised for unalloyed and alloyed Stahl machining. What benefit does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WPP20G grade reduces flank wear and improves thermal stability, extending the service life of the insert under typical turning conditions. How does the FW4 chipbreaker influence machining? The FW4 chipbreaker produces short, controllable chips when cutting Stahl, improving chip evacuation and lowering the risk of entanglement or surface damage. What effect does a 0.4 mm corner radius have on finished parts? A 0.4 mm corner radius balances surface finish and strength at the cutting edge, helping to achieve consistent part geometry without excessive radial forces. Is the TCMT16T304-FW4 compatible with standard toolholders? The TCMT16T304 form is a standard insert geometry and fits toolholders designed for TCMT inserts; confirm seat and clamp compatibility before assembly. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and brand designations are the property of their respective owners and are used here for explanatory purposes only. There is no affiliation between our company and the named brands. The item offered is an original, factory‑new product of the manufacturer (Walter Tools).
TCMT16T304-FW4 WSM20S FW4 Wendeplatten - Walter Tools
The combination of a high‑performance WSM20S grade and the FW4 chipbreaker delivers secure chip formation and extended edge life for demanding materials; procure the insert through Metav Werkzeuge or consult our advisors for application‑specific recommendations. TCMT16T304‑FW4 WSM20S indexable turning insert — Tiger·tec Silver, FW4 chipbreaker (Walter Tools) A TCMT16T304‑FW4 WSM20S indexable turning insert engineered for heavy‑duty machining of stainless steel and heat‑resistant superalloys, offering Tiger·tec Silver coating and a proven FW4 chipbreaker for stable production. Tiger·tec Silver coating for high temperature stability Optimised for stainless steel and superalloys FW4 chipbreaker for consistent chip control 0.4 mm corner radius for fine surface finishes Greater process reliability with advanced grade and chip control The coated carbide WSM20S, utilising Tiger·tec Silver technology, is designed to maintain a stable cutting edge under high thermal load, which directly improves productivity in continuous turning operations. Combined with the FW4 chipbreaker, the insert supports predictable chip formation and fewer interruptions for chip clearing. This results in a measurable reduction in downtime and more consistent component quality when working with stainless steel and similar difficult‑to‑cut materials. Geometry that balances durability and surface quality A triangle 60° configuration with a 0.4 mm corner radius and a 7° relief angle provides a stable contact geometry that resists chipping while enabling fine surface finishes where required. The specified plate thickness T3 contributes to stiffness at the cutting edge, reducing vibration and maintaining dimensional accuracy over longer tool life. These geometric choices help deliver repeatable results on batch production and small series alike. Versatile application scope and user benefits This insert is suitable for machining in the ISO groups M and S — specifically stainless steel and heat‑resistant superalloys/titanium — offering a practical solution where thermal resistance and edge stability are critical. The combination of a coated carbide substrate and a dedicated chipbreaker supports a broad range of cutting parameters, allowing shops to increase material removal rates without compromising surface integrity. Compatibility with standard triangular toolholders makes implementation straightforward in existing turning toolbanks. Discuss application details for the Walter Tools TCMT16T304‑FW4 WSM20S with Metav Werkzeuge’s technical team — advisors available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TCMT16T304‑FW4‑WSM20S‑WALTER Product name: TCMT16T304‑FW4 WSM20S Product type: Indexable turning insert Series: Tiger·tec Silver Grade: WSM20S Core dimensions Size: 16 mm Plate form: Triangle 60° Corner radius: 0.4 mm Relief angle: 7° Thickness: T3 Special features Coating: Tiger·tec Silver Chipbreaker: FW4 Substrate: Coated carbide (WSM20S) Tolerance class: M Suitable for: stainless steel (M), heat‑resistant superalloys / titanium (S) FAQ What materials is this insert best suited for? The TCMT16T304‑FW4 WSM20S indexable turning insert (Walter Tools, SKU TCMT16T304‑FW4‑WSM20S‑WALTER) is optimised for stainless steel and heat‑resistant superalloys, reflecting the WSM20S grade focus. How does the FW4 chipbreaker affect machining performance? The FW4 chipbreaker on this insert promotes consistent chip formation and evacuation, which improves process stability and reduces the risk of built‑up edge on the WSM20S coated carbide grade. Can the insert provide fine surface finishes on stainless parts? Yes; the combination of the triangle 60° geometry and a 0.4 mm corner radius supports fine surface quality while maintaining edge robustness during turning of stainless steel components. The Walter AG (brand presentation: Walter Tools) is one of the leading manufacturers of precision metal‑cutting tools and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered marks are mentioned solely for explanation. There is no affiliation between our company and the named manufacturers. The offered item is an original, factory‑new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TCMT16T304-MK4 WKK10S WKK10S Wendeplatten - Walter Tools
Efficient machining of cast iron is delivered by the Tiger·tec Silver coating combined with the WKK10S grade and MK4 chipbreaker; order the TCMT16T304-MK4 WKK10S insert via Metav Werkzeuge or consult the in-house specialists for cutting data and availability TCMT16T304-MK4 WKK10S turning insert — Triangle 60°, for cast iron | Walter Tools The TCMT16T304-MK4 WKK10S is a triangular 60° indexable turning insert designed for productive machining of cast iron, offering a stable cutting edge and controlled chip formation for series production environments Tiger·tec Silver coating for extended tool life WKK10S grade optimised for cast iron MK4 chipbreaker for controlled chip formation Triangle 60° shape with 0.4 mm corner radius Boosted productivity for cast iron turning The combination of Tiger·tec Silver coating and the WKK10S coated-carbide grade is engineered to resist the abrasive wear typical of cast iron machining, so tool changes and unexpected stops are reduced. The MK4 chipbreaker promotes predictable, short chips that evacuate reliably, lowering the risk of workpiece damage and machine downtime. This results in a measurable increase in process efficiency and a more consistent cycle time for lot production, making the insert particularly suitable for workshops and small series manufacturing where uptime is essential. Consistent surface finish through stable geometry A triangle 60° insert geometry with a 0.4 mm corner radius and a 7° relief angle delivers repeatable cutting conditions and stable tool positioning. The nominal T3 thickness provides rigidity for interrupted cuts and facing operations, while the triangular form offers up to three usable cutting edges per insert, improving economy per index. These geometric features are selected to maintain surface quality with minimal vibration, so final part tolerances are easier to hold and rework is reduced. Practical integration and machining guidance Compatibility with standard TCMT toolholders and clear ISO classification (ISO 513 group K) means the insert can be integrated quickly into existing toolsets for cast iron applications. The tolerance class M ensures consistent fit and repeatability across production batches. For best results, start with moderate cutting speeds and increase based on tool wear observations; the coated surface is optimised for abrasive materials, leading to extended tool life and stable chip control. The Walter Tools design and the Tiger·tec Silver technology together support a cost-effective machining strategy for abrasive cast iron components. Contact Metav Werkzeuge for tailored recommendations on the TCMT16T304-MK4 WKK10S insert and guidance on suitable cutting parameters and delivery options Technical data Article number: TCMT16T304-MK4-WKK10S-WALTER Product designation: TCMT16T304-MK4 WKK10S Manufacturer: Walter Tools Core specifications Insert size: 16 mm Corner radius: 0.4 mm Relief angle: 7° Insert shape: Triangle 60° Thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKK10S (coated carbide) Chipbreaker: MK4 Suitable for: cast iron (ISO group K) Series: Tiger-tec Silver FAQ What materials is this insert intended for? The TCMT16T304-MK4 WKK10S insert is intended primarily for cast iron machining (ISO group K) and is optimised to handle the abrasive wear and short, breaking chips typical of these materials. What advantages does the Tiger·tec Silver coating provide? Tiger·tec Silver extends tool life through improved wear resistance and thermal stability; combined with the WKK10S grade, the coating reduces flank and crater wear during continuous cast iron turning. How many cutting edges are available per insert? The triangular TCMT design offers up to three usable cutting edges per insert, allowing economical indexing and straightforward replacement during scheduled maintenance. Is the insert compatible with standard toolholders? Yes; the TCMT16T304-MK4 form follows common TCMT insert standards and is compatible with matching TCMT toolholders for turning applications Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT16T304-MK4 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide durability, Tiger·tec Silver wear resistance and precise MK4 chip control for efficient cast iron production — order directly via Metav Werkzeuge or consult our experts for application support. TCMT16T304-MK4 WKK20S — Drilling/boring & turning indexable insert, triangle 60°, for cast iron — Walter Tools The TCMT16T304-MK4 WKK20S is a coated carbide indexable insert engineered for drilling, boring and turning operations on cast iron, offering a balance of durability and reliable chip control. Tiger·tec Silver coating for enhanced wear resistance Designed for machining cast iron (ISO group K) Triangle 60° form with 0.4 mm corner radius MK4 chipbreaker for controlled chip formation Consistent chip control for abrasive cast‑iron work The combination of the MK4 chipbreaker and the WKK20S grade gives a predictable chip flow when machining cast iron, addressing the typical short, brittle chips of these materials. In practice, this means fewer interruptions from chip jamming and a steadier machining cadence. The insert’s chipformer is optimised for abrasive wear, which helps to maintain cutting-edge integrity over longer tool life and reduces unplanned stops in production. Geometry tuned for repeatable surface quality Featuring a triangle 60° shape with a corner radius of 0.4 mm and a 7° clearance, the insert provides a stable cutting geometry that supports dimensional consistency and reliable surface finish. The acute form suits both radial and axial engagement conditions commonly found in drilling and turning operations. Such geometry helps to reduce vibration and ensures repeatable results when inserted into standard toolholders. Tiger·tec Silver coating extends productive lifetime The insert’s affiliation with the Tiger·tec Silver series indicates a coated carbide technology focused on wear resistance and broad applicability across cast‑iron grades. The coating reduces flank wear under the high abrasion typical of cast materials, extending the period between index changes and contributing to lower overall tooling consumption. As a consequence, process reliability improves and the frequency of machine downtime for insert replacement is reduced. Simple specification for easy integration into production The insert is coded as TCMT16T304‑MK4 WKK20S, with a plate size of 16 mm and plate thickness T3, enabling straightforward selection for holders specified to this ISO designation. The clear labelling and standard geometry support quick inventory management and predictable interchangeability across machines. For production planning, this insert is suitable wherever cast‑iron components require efficient, stable machining with controlled chip formation. For reliable cast‑iron machining with proven wear performance, choose Walter Tools’ Tiger·tec Silver grade — order the TCMT16T304‑MK4 WKK20S via Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TCMT16T304-MK4-WKK20S-WALTER ISO designation: TCMT16T304-MK4 WKK20S Series: Tiger·tec Silver Grade: WKK20S Manufacturer: Walter Tools Facts Plate size: 16 mm Corner radius: 0.4 mm Relief angle: 7° Plate form: Triangle 60° Plate thickness: T3 Special features Chipbreaker: MK4 Coating: Tiger·tec Silver (coated carbide) Material group: K (cast iron) Tolerance class: M Execution: T FAQ What materials is this insert intended for? The TCMT16T304‑MK4 WKK20S is designed for cast iron machining (ISO group K), with the WKK20S grade optimised for abrasive cast materials. How does the Tiger·tec Silver coating benefit performance? The Tiger·tec Silver coating on this Walter Tools insert reduces flank wear and extends productive life under the abrasive conditions typical of cast‑iron turning and drilling. Which chip behaviour can be expected with the MK4 chipbreaker? The MK4 chipbreaker promotes controlled, short chip formation suited to cast iron, reducing the risk of entanglement and improving process stability. Is the insert compatible with standard TCMT toolholders? Yes, the ISO designation TCMT16T304‑MK4 corresponds to standard TCMT holders; the triangle 60° form and size ensure straightforward interchangeability. What dimensional features support consistent surface finish? The combination of 0.4 mm corner radius and 7° clearance provides a stable cutting geometry that helps achieve repeatable surface quality and dimensional control. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names belong to their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original factory‑new goods of Walter Tools.
TCMT16T304-MM4 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold performance, secure chip formation with the MM4 chipbreaker and a compact triangle 60° geometry for reliable machining of stainless steel; order directly via Metav Werkzeuge or consult the team for tailored tool advice. TCMT16T304‑MM4 WMP20G – Indexable Turning/Boring Insert, Tiger‑tec Gold, Walter Tools The TCMT16T304‑MM4 WMP20G is an indexable insert for turning and boring, optimised for machining stainless steel under medium to robust conditions. TCMT16T304‑MM4 WMP20G, Tiger‑tec Gold Optimised for stainless steel (ISO M) 7° clearance angle for secure cutting 0.4 mm nose radius, triangle 60° form Consistent edge stability under stainless loads The Tiger‑tec Gold series combines a coated carbide substrate and engineered microstructure to deliver stable cutting edges when machining stainless steel. The insert’s WMP20G grade is designed to resist the common issues of work hardening and built‑up edge in these materials, which improves process reliability and reduces scrap rates. With a controlled rake and a 7° clearance the geometry helps maintain a predictable contact zone, making the cutting action more consistent across varied stainless grades. This results in fewer tool changes and a steadier production flow. Predictable chip control and surface quality Equipped with the MM4 chipbreaker, the insert supports controlled chip formation, which is essential for stainless steel where chips can be stringy and hazardous. The 0.4 mm nose radius balances strength and finish: it supports a robust cutting edge for medium cuts while enabling a good surface result on finishing passes. For process planners and shopfloor engineers, that means fewer interruptions and improved throughput without sacrificing workpiece integrity. The combination of chip geometry and coating technology also contributes to longer effective cutting times before indexation is required. Mounting compatibility and application notes The insert follows the TCMT designation and fits toolholders designed for this geometry, offering flexible use in turning and boring tool assemblies. The triangle 60° form provides three cutting edges per index, which supports economical indexation strategies in batch production. As a turning/boring insert manufactured by Walter Tools, the design is suited to both conventional and CNC lathe setups and is particularly recommended where stainless steel is the main workpiece material. Attention to holder rigidity and coolant strategy will further enhance tool life and component quality. Cost efficiency through reduced downtime By combining a proven coating system with a carbide grade tuned for stainless conditions, the insert helps to extend intervals between indexations and reduces the need for premature tool replacement. Fewer tool changes and improved process stability offer measurable savings in labour and machine idle time. Integrating these inserts into a cutting programme can lead to quicker cycle stabilisation and a more predictable output — advantages that are especially relevant in small and mid‑volume production runs where uptime is critical. Contact Metav Werkzeuge for an application consultation for the Walter Tools Tiger‑tec Gold inserts; call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss sample trials and holder recommendations Technical Data SKU: TCMT16T304-MM4-WMP20G-WALTER Designation: TCMT16T304‑MM4 WMP20G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WMP20G Facts Clearance angle: 7° Nose radius: 0.4 mm Insert size: 16 mm Thickness: T3 Form angle: Triangle 60° Special features Chipbreaker: MM4 Suitable for: stainless steel (ISO M) Tolerance class: M Coating technology: Tiger‑tec Gold Application: Turning and boring indexable insert FAQ Is this insert suitable for machining stainless steel? The TCMT16T304‑MM4 WMP20G from Walter Tools is specifically developed for stainless steel (ISO M), providing enhanced edge stability and chip control for these challenging materials. What does the 0.4 mm nose radius mean for component finish? A 0.4 mm nose radius gives a compromise between edge strength and surface quality; the TCMT16T304‑MM4 offers improved finish on semi‑finishing passes while keeping the edge robust for medium cuts. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker promotes predictable chip segmentation with the WMP20G grade, reducing the risk of long stringy chips and improving handling and evacuation during turning operations. Can the insert be used in standard TCMT toolholders? Yes, the insert follows the TCMT designation and is compatible with toolholders designed for this insert form and size; ensure the holder supports triangle 60° inserts and provides adequate rigidity. Is the Tiger‑tec Gold series suitable for heavy machining? The Tiger‑tec Gold family, including this WMP20G grade, is intended for medium to robust conditions with stainless steel; for very heavy interrupted cuts further grade selection and cutting data adjustments may be required. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for informative purposes. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
TCMT16T304-MM4 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the MM4 chipbreaker for reliable machining of stainless steel; the triangular 60° geometry and 0.4 mm corner radius deliver consistent edge stability and predictable chip control. Order the insert directly via Metav Werkzeuge or ask the consultants for application-specific recommendations. TCMT16T304-MM4 WMP20S — Triangular turning/boring indexable insert for stainless steel by Walter Tools The TCMT16T304-MM4 WMP20S is a triangular turning and boring indexable insert designed for medium to robust stainless steel machining, optimised for stable chip formation and consistent edge life. Tiger·tec Silver coating for stainless steel performance MM4 chipbreaker for controlled chip formation 7° relief angle, 0.4 mm corner radius Triangular 60° insert, 16 mm size, T3 thickness Stable machining and process security for stainless steel components The Tiger·tec Silver coating combined with the WMP20S grade provides a balanced response to the challenges of stainless steel: high work-hardening tendency, sticky chips and elevated heat. The coating reduces friction and supports a stable cutting edge, which in turn lowers the risk of built-up edge and unplanned rework. For production environments that demand repeatability, this insert delivers consistent results across medium to robust cutting conditions, improving throughput and reducing downtime. Controlled chip formation and safer turning cycles The MM4 chipbreaker is engineered to shape chips reliably during interrupted and continuous turning. By influencing chip curl and breakage, the breaker reduces entanglement and helps maintain a clear cutting zone. This controlled chip behaviour simplifies chip evacuation and minimises the risk to part quality and operator safety, making machining cycles more efficient and predictable. Geometry that balances strength and surface quality The triangular 60° form with a 0.4 mm corner radius and 7° relief angle provides a compromise between edge robustness and surface finish. The modest corner radius increases resistance to edge chipping during heavier cuts, while the 60° shape allows three indexed cutting edges per insert, optimising tool utilisation. The insert’s T3 thickness and 16 mm designation ensure compatibility with standard toolholders designed for TCMT geometry, enabling straightforward integration into existing tool systems. Coated carbide composition for long tool life The cutting material is a coated carbide grade from the Tiger·tec Silver family, formulated to withstand the thermal and mechanical stresses typical of stainless steel machining. The coating helps to preserve the cutting edge and reduce flank wear, which supports longer intervals between indexings and insert changes. In practice, this means fewer interruptions for tool handling and a more economical production flow when compared to uncoated alternatives. Practical benefits for workshop and production use By combining a modern coating technology with a purpose-designed chipbreaker and a robust cutting geometry, this insert supports higher process stability and fewer quality deviations. The result is improved component consistency, reduced scrap rates and easier planning of machining cycles. For operations seeking to increase productivity without sacrificing surface integrity, this insert represents a pragmatic choice. Contact Metav Werkzeuge for tailored advice on Walter Tools TCMT16T304‑MM4 WMP20S inserts and to discuss optimal insert selection for specific stainless steel applications Technical data SKU: TCMT16T304-MM4-WMP20S-WALTER Designation: TCMT16T304-MM4 WMP20S Manufacturer: Walter Tools Series: Tiger·tec Silver Core specifications Shape: Triangle 60° Size: 16 Thickness: T3 Relief angle: 7° Corner radius: 0.4 mm Chipbreaker: MM4 Materials & features Grade: WMP20S (coated carbide) Application: stainless steel (ISO group M) Material code: M Tolerance class: M Suitable for medium to robust cutting conditions FAQ Which materials is this insert suitable for? The TCMT16T304‑MM4 WMP20S is specifically designed for stainless steel (ISO group M) and performs under medium to robust machining conditions, benefiting from the Tiger·tec Silver coating for improved edge stability. What advantages does the WMP20S grade provide? WMP20S is a coated carbide grade within the Tiger·tec Silver family; it combines reduced friction, enhanced heat resistance and reliable edge strength to support consistent performance on stainless steel components. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker shapes and breaks chips to reduce entanglement and improve evacuation; this leads to clearer cutting zones, fewer interruptions and more predictable cycle times when turning stainless steel. Which cutting geometry and features support tool life? The triangular 60° form with a 0.4 mm corner radius and 7° relief angle provides a robust cutting edge that resists chipping while allowing multiple indexed edges, supporting longer in-process life and lower tooling costs. Is the insert compatible with standard TCMT toolholders? The TCMT designation corresponds to standard indexable insert geometries; the TCMT16T304‑MM4 insert is intended for holders accepting TCMT inserts and will integrate into conventional turning and boring tool assemblies. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT16T304-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Take advantage of the combination of high process security, Tiger·tec Silver-coated performance, and a reliable MM4 chipbreaker for consistent productivity; order or request application advice directly via Metav Werkzeuge for a smooth machining transition. TCMT16T304-MM4 WSM20S triangle 60° indexable insert for turning/boring (Walter Tools) The TCMT16T304-MM4 WSM20S is a triangle 60° indexable insert engineered for demanding turning and boring tasks, especially in rostfreier Stahl and heat-resistant alloys; its coated-carbide grade and robust chip control are aimed at production environments seeking stable cutting edges and repeatable part quality. Tiger·tec Silver-coated carbide grade WSM20S Triangle 60° form for versatile toolholders 0.4 mm corner radius for controlled cutting Optimised MM4 chipbreaker for secure chip control Precision and process stability for high-alloy materials The combination of the Tiger·tec Silver coating and the WSM20S grade supports machining of tough, heat-resistant alloys by improving thermal stability and wear resistance. Coating technology reduces friction at the rake face, which helps to maintain a sharp cutting edge under elevated temperatures and reduces the risk of built-up edge. For production applications this means fewer unplanned tool changes, more predictable tool life, and higher first-pass accuracy when working with rostfreier Stahl or nickel‑based alloys. The insert’s engineered surface finish also helps to promote consistent chip control, which is crucial when machining sticky or gummy materials that otherwise compromise cycle time and surface quality. Geometry designed to increase usable edges and stability A triangle 60° form provides three indexed cutting edges per insert, improving economy per index change and offering flexibility in tool‑holder fitment. The insert’s 0.4 mm corner radius balances edge strength with the ability to achieve a fine surface finish, while the 7° clearance angle reduces rubbing and lowers cutting forces during light finishing passes. The plate thickness T3 supports secure clamping and helps retain rigidity under interrupted cuts. Together with the MM4 chipbreaker, these geometric attributes ensure controlled chip formation and more uniform cutting loads, which results in steady component tolerances and a reduced chance of chatter on medium‑duty turning operations. Shop-floor benefits: repeatability, compatibility and lower downtime As an indexable insert produced for industrial turning, this component is compatible with standard triangle insert toolholders and supports quick indexation for minimal machine downtime. The MM4 chipbreaker promotes shorter, more manageable chips that simplify automatic chip evacuation and reduce handling effort. Because the grade is optimised for tough alloys and rostfreier Stahl, the insert contributes to predictable wear patterns and fewer disruptive regrinds, which supports higher overall equipment effectiveness (OEE). The net result for production teams is fewer process interruptions, a clearer maintenance schedule, and improved batch consistency without complex process adjustments. Contact Metav Werkzeuge for a cutting‑edge evaluation and application recommendation on Walter Tools inserts; technical consultants can advise on holder compatibility and sample allocation Technical data Article number: TCMT16T304-MM4-WSM20S-WALTER Product designation: TCMT16T304-MM4 WSM20S Brand: Walter Tools Facts Insert size: 16 Corner radius: 0.4 mm Clearance angle: 7° Thickness: T3 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WSM20S Chipbreaker: MM4 Shape: Triangle 60° Coating: Tiger·tec Silver-coated carbide Material groups: S / M Suitable application: rostfreier Stahl FAQ What materials is this insert suitable for? The TCMT16T304-MM4 WSM20S insert is specified for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), offering improved thermal stability on these materials. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker on this Walter Tools insert produces short, controllable chips, which helps to improve chip evacuation, surface finish, and process reliability during turning operations. How many cutting edges are available per insert? The triangular 60° geometry provides three usable cutting edges per insert, increasing economy through multiple indexations. Which series and coating technology does the grade belong to? This insert is part of the Tiger·tec Silver series; the coated‑carbide grade WSM20S is formulated for wear resistance and thermal stability in demanding applications. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
TCMT16T304-MP4 WPP10G MP4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, precise MP4 chip control and a compact triangular form to maximise productivity in steel turning operations — order original Walter Tools inserts directly from Metav Werkzeuge or contact our consultants for application advice. TCMT16T304‑MP4 WPP10G (TCMT16T304‑MP4 WPP10G) – Triangle 60° turning insert for steel, Tiger‑tec Gold, Walter Tools A compact indexable turning insert, TCMT16T304‑MP4 WPP10G, designed for reliable steel machining with a coated‑carbide grade optimised for wear resistance and consistent chip formation. Tiger‑tec Gold coating for long tool life Triangle 60° form for versatile clamping 0.4 mm corner radius for fine finishes Built for consistent productivity in steel turning The insert combines a coated carbide substrate from the Tiger‑tec Gold family with the WPP10G grade, engineered to handle the typical heat and chip formation of steel machining. The MP4 chipbreaker promotes stable chip flow and reduces the risk of built‑up edge, which contributes to longer uninterrupted cutting times and fewer tool changes. For production environments where cycle times and repeatability matter, this configuration offers a cost‑efficient balance between wear resistance and toughness. Precision geometry for surface quality and tool life With a triangle 60° shape and a 0.4 mm corner radius, the insert enables secure seating in standard toolholders while supporting shallow to medium depth finishing passes that deliver improved surface finish. The 7° clearance angle helps to reduce rubbing on the flank face, lowering cutting forces and heat at the edge. These geometric choices translate into predictable tool behaviour and easier process window definition when working with unalloyed and alloyed steels. Practical benefits and material compatibility explained The grade is specified for material group P, which stands for steel according to ISO classifications; this makes the insert suitable for a broad range of steel grades encountered in general turning. The design tolerances (class M) and the T3 thickness provide mechanical stability at moderate cutting parameters, while the coated surface reduces adhesion and wear. In practice, this means fewer interruptions for regrinds or insert changes and a more stable production flow on lathes and turning centres using standard clamping systems. Contact Metav Werkzeuge today for tailored recommendations on Walter Tools Tiger‑tec Gold inserts and to discuss the ideal insert geometry for specific steel grades and machining strategies Technical data SKU: TCMT16T304‑MP4‑WPP10G‑WALTER Designation: TCMT16T304‑MP4 WPP10G Manufacturer: Walter Tools Product type: Turning/boring indexable insert Series: Tiger‑tec Gold Grade: WPP10G Chipbreaker: MP4 Tolerance class: M Facts Corner radius: 0.4 mm Clearance angle: 7° Insert shape: Triangle 60° Size: 16 (insert size designation) Thickness: T3 Special features Coating: Tiger‑tec Gold (coated carbide grade) Material suitability: Steel (ISO group P) Application focus: Reliable chip control and wear resistance Execution: T (relief/ground style as supplied) FAQ What steels is this insert suitable for? The TCMT16T304‑MP4 WPP10G insert is designed for ISO material group P, covering unalloyed and alloyed steels; the WPP10G grade balances wear resistance and toughness for typical steel turning tasks. Which chipbreaker is fitted and what is its advantage? This insert uses the MP4 chipbreaker, which improves chip control and promotes consistent evacuation, reducing the likelihood of chip entanglement and aiding unattended machining. How does the Tiger‑tec Gold coating improve performance? Tiger‑tec Gold increases thermal and abrasive wear resistance on coated carbide inserts; for Walter Tools inserts this means longer edge life and greater process security under typical steel cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TCMT16T304-MP4 WPP20G MP4 Wendeplatten - Walter Tools
High wear resistance and controlled chip formation from the Tiger‑tec Gold grade and MP4 chipbreaker make this insert a reliable choice for productive Stahl turning; its 0.4 mm corner radius and 7° relief angle support consistent surface quality — order the TCMT16T304‑MP4 WPP20G directly via Metav Werkzeuge or consult the technical advisors if required. TCMT16T304-MP4 WPP20G — Triangle 60° turning insert, Tiger‑tec Gold by Walter Tools The TCMT16T304-MP4 WPP20G is a triangle 60° turning insert designed for efficient Stahl machining, featuring an MP4 chipbreaker and a Tiger‑tec Gold coated grade for stable tool life and reproducible performance Tiger‑tec Gold coating WPP20G for Stahl machining MP4 chipbreaker for stable chip formation Triangle 60° insert with 0.4 mm corner radius 7° relief angle and T3 plate thickness Greater productivity through controlled chip formation The combination of a Tiger‑tec Gold coating and the WPP20G grade delivers enhanced thermal resistance and abrasive wear protection, which translates into longer intervals between indexings and fewer unexpected tool changes. The MP4 chipbreaker is engineered for consistent chip segmentation when machining Stahl, reducing the risk of built‑up edge and improving cycle-time stability. Explaining briefly: the chipbreaker geometry modulates chip curl and breakage so that chips evacuate reliably even in interrupted cuts, which supports uninterrupted production and reduces manual post‑processing time. Consistent surface quality and predictable tool life A 0.4 mm corner radius together with the 7° relief angle balances edge strength and surface finish, allowing both general turning and light finishing passes with the same insert. The coated hardmetal base provides a robust cutting edge that withstands typical heat generation during Stahl turning. As a result, repeatable dimensional accuracy and a uniform surface texture are achievable across batches, supporting quality control targets and lowering scrap rates. This predictability converts directly into cost-efficiency on serial runs. Designed for straightforward integration into tooling systems The triangular 60° form and T3 plate thickness ensure compatibility with common indexable toolholders, simplifying inventory and setup procedures. The designation TCMT16T304‑MP4 WPP20G aligns with standard tooling nomenclature, making it easier to match the insert to existing holders and CNC programmes. For application advice or cutting-parameter recommendations, Metav Werkzeuge provides technical documentation and consultancy to support process optimisation; support is available for selecting speeds, feeds and coolant strategies to suit the specific Stahl grade and machining conditions. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger‑tec Gold inserts — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TCMT16T304‑MP4‑WPP20G‑WALTER Designation: TCMT16T304‑MP4 WPP20G Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Plate form: Triangle 60° Plate size: 16 Corner radius: 0.4 mm Relief angle: 7° Plate thickness: T3 Tolerance class: M Special features Coating/grade: WPP20G (Tiger‑tec Gold) Chipbreaker: MP4 Execution: T Material application: suitable for Stahl Intended application: turning / boring indexable insert FAQ What materials is this insert suitable for? The TCMT16T304‑MP4 WPP20G is specified for machining Stahl; the WPP20G grade and Tiger‑tec Gold technology are optimised for the thermal and chip‑formation characteristics typical of steel turning. Which chipbreaker is integrated in this insert and what is its benefit? The insert features the MP4 chipbreaker, which promotes stable chip formation and reliable evacuation, helping to reduce interruptions and enhance process stability when turning Stahl. How does the Tiger‑tec Gold coating affect performance? The Tiger‑tec Gold coating increases thermal and abrasive resistance of the cutting edge, resulting in longer tool life and more consistent surface quality in continuous and batch production. Is this insert compatible with standard holders? Yes; the triangle 60° form and T3 thickness conform to common indexable insert standards, making the TCMT16T304‑MP4 WPP20G straightforward to fit into compatible toolholders. Manufacturer: Walter Tools. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. The offered item is original factory‑new goods of the manufacturer.
TCMT16T304-MP6 WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the MP6 chipbreaker for reliable, productive turning in Stahl; the triangular 60° geometry with a 0.4 mm corner radius ensures stable cutting behaviour and repeatable edge performance. Order directly via Metav Werkzeuge or request expert consultation for application-specific recommendations. TCMT16T304-MP6 WPP10G triangular turning insert, Tiger‑tec Gold coating (for Stahl) — Walter Tools A TCMT16T304-MP6 WPP10G indexable turning insert designed for medium-to-high performance Stahl machining, combining Tiger‑tec Gold coating with MP6 chip control for productive, consistent results. Tiger‑tec Gold coating for longer tool life MP6 chipbreaker for stable chip control Triangle 60° insert with 0.4 mm corner radius Suitable for machining Stahl (ISO P) Consistent chip control for dependable cycle times The combination of the MP6 chipbreaker and the insert geometry delivers controlled chip formation, reducing interruptions and improving process stability. This results in fewer stoppages for chip disposal and a more predictable tool life in routine turning operations. The indexable insert design permits rapid seat changes, keeping spindle uptime high and supporting efficient batch production in job shops and component manufacturing. Coating and grade engineered for extended wear resistance The Tiger‑tec Gold coating and the WPP10G grade form a wear‑resistant system optimised for typical thermal loads encountered when machining Stahl. Coating technology reduces flank wear and helps maintain cutting edge integrity, which in turn supports consistent surface finish and dimensional accuracy over longer tool life. This means fewer insert changes and a lower total cost per part in medium-duty turning tasks. Geometry tailored to versatile turning tasks With a 60° triangular form and a 0.4 mm corner radius, the insert provides a good balance between edge strength and versatility for common turning profiles. The 7° relief angle supports smooth entry and exit during cuts while the T3 thickness contributes to stable clamping and reduced vibration. Such geometry is particularly useful for general turning, light profiling and finishing passes where repeatability is important. Integrating the insert into production workflows As an indexable solution from Walter Tools, this insert is straightforward to specify for existing tool holders that accept the TCMT format. The modular nature of indexable inserts simplifies logistics—stocking a single insert style covers a wide range of diameters and operations—helping to streamline tool inventory and procurement. For process planning, the grade’s focus on Stahl machining aids in standardising cutting data across parts families. For precision and productivity with Walter Tools’ Tiger‑tec Gold inserts, contact Metav Werkzeuge for tailored application advice and procurement: info@metav-werkzeuge.com · +49 2822 7131930 Technical data SKU: TCMT16T304-MP6-WPP10G-WALTER Article designation: TCMT16T304-MP6 WPP10G Manufacturer: Walter Tools Facts Insert size: 16 mm Shape: Triangle 60° Corner radius: 0.4 mm Relief angle: 7° Thickness: T3 Chipbreaker: MP6 Special features Coating: Tiger‑tec Gold Grade: WPP10G (coated carbide) Tolerance class: M Suitable material group: P (Stahl) FAQ What materials is this insert suitable for? This TCMT16T304-MP6 WPP10G insert is optimised for Stahl (ISO group P) and is designed to manage the typical heat and chip characteristics of these materials. How does the MP6 chipbreaker benefit production? The MP6 chipbreaker on the WPP10G grade improves chip control and reduces the risk of entanglement, resulting in more stable cutting conditions and fewer production interruptions. Can the insert be used for finishing operations? Yes; the 0.4 mm corner radius and Tiger‑tec Gold coating support good surface finish and edge durability, making the insert suitable for both medium finishing and light profiling. Is the Tiger‑tec Gold coating appropriate for higher cutting speeds? Tiger‑tec Gold is formulated to provide wear resistance under common thermal loads for Stahl machining, supporting sustained performance in many medium-to-high speed applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
TCMT16T304-MP6 WPP20G Wendeplatten - Walter Tools
Taking advantage of a Tiger·tec Gold wear‑resistant grade and the MP6 chipbreaker, this insert delivers reliable chip control and consistent edge life for steel turning; order the TCMT16T304‑MP6 WPP20G directly via Metav Werkzeuge or ask our consultants if needed. TCMT16T304‑MP6 WPP20G indexable turning insert — Tiger·tec Gold, for steel — Walter Tools The TCMT16T304‑MP6 WPP20G is a triangular 60° indexable turning insert designed for general steel machining (ISO P), combining a wear‑resistant Tiger·tec Gold grade with an MP6 chipbreaker for stable, predictable cutting performance. Tiger·tec Gold coated, wear‑resistant grade WPP20G MP6 chipbreaker for reliable chip control Triangle 60° form with 0.4 mm corner radius Designed for steel machining (ISO P), thickness T3 High‑performance grade for efficient steel turning The combination of Tiger·tec Gold coating and the WPP20G substrate is engineered for sustained cutting under the thermal and mechanical demands of steel turning. The coated cemented carbide improves wear resistance and preserves the cutting edge over extended shifts, which reduces tool changes and supports higher parts-per-shift productivity. The provided MP6 chipbreaker produces short, controllable chips in a wide range of cutting conditions; this lowers the risk of built-up edge and helps maintain surface finish quality. For operations seeking predictable tool life and lower overall process costs, the choice of a coated grade tailored to ISO P materials is a rational, efficiency‑driven decision. Geometry and chip control that simplify machining A triangle 60° plate form with a 0.4 mm corner radius offers a balance between edge strength and accessibility for medium turning tasks. The chipbreaker geometry is matched to the plate form and the grade to ensure consistent chip formation across feed and speed windows typical for steel. The 0.4 mm corner radius increases resistance to edge chipping when interrupted cuts or variable material hardness occur, while the T3 thickness stabilises seating in most standard toolholders. These design choices translate into fewer interruptions, improved component surface quality and smoother setup procedures for shopfloor staff. Practical application guidance and measurable benefits This insert is suitable for a broad range of steel grades as indicated by the ISO P designation, making it a versatile option for batch production and general turning tasks. The insert size (16 mm inscribed circle) and the 7° clearance angle contribute to predictable contact mechanics between tool and workpiece, supporting consistent tool forces and surface finish. By selecting an insert with these specifications, process planners can expect reduced variation in component tolerances and a lower scrap rate. For users transitioning from uncoated grades, the coated Tiger·tec Gold technology typically enables higher cutting speeds or extended tool life, offering a clear cost‑benefit rationale. For robust steel turning with Tiger·tec Gold performance and dependable chip control, contact Metav Werkzeuge for ordering and application advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: TCMT16T304‑MP6‑WPP20G‑WALTER Product: Drehwendeschneidplatte / indexable turning insert Designation: TCMT16T304‑MP6 WPP20G Brand: Walter Tools Facts Inscribed circle / size: 16 mm Clearance angle: 7° Corner radius: 0.4 mm Thickness: T3 Tolerance class: M Special features Grade: WPP20G (Tiger·tec Gold coating) Chipbreaker: MP6 Plate form: Triangle 60° Application: ISO P (steel machining) Execution: T FAQ What materials is this insert suitable for? The TCMT16T304‑MP6 WPP20G is formulated for ISO P applications; it is intended for machining unalloyed and alloyed steel. How does the MP6 chipbreaker affect machining? The MP6 chipbreaker on the Walter Tools insert promotes short, controlled chips in typical steel turning operations, improving safety and surface finish consistency. Is the Tiger·tec Gold coating beneficial for higher cutting speeds? Yes. The Tiger·tec Gold coating increases wear resistance and thermal stability, which commonly allows either increased cutting speeds or longer tool life in steel turning. Can the insert be used in interrupted cuts? The 0.4 mm corner radius and the coated grade enhance edge strength, making the insert more tolerant of light interruptions compared with very fine‑radius alternatives. Which toolholders are compatible with the TCMT16T304‑MP6 WPP20G? Standard toolholders that accept TCMT‑style triangular inserts and clamp thickness T3 are compatible; ensure the seat and clamp match the TCMT form for secure mounting. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are used solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is an original, brand‑new product from the manufacturer.
TCMT16T304-MW4 WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKK20S grade for stable chip formation and extended tool life in cast-iron turning; order directly via Metav Werkzeuge or consult our specialists for application advice. TCMT16T304-MW4 WKK20S — Indexable turning insert (triangle 60°, 0.4 mm radius) by Walter Tools TCMT16T304-MW4 WKK20S is an indexable turning insert designed for efficient machining of cast iron components, combining a specialised chipbreaker and Tiger·tec Silver technology for reproducible performance in production turning. Tiger·tec Silver coating for high wear resistance Optimised for cast iron machining Triangle 60° form for secure clamping 0.4 mm corner radius for precise finishing Higher productivity through tailored grade and coating The WKK20S grade in the Tiger·tec Silver series is a coated cemented carbide developed specifically for the demands of cast iron. Its surface treatment improves resistance to the abrasive wear typical of grey and ductile castings, so machining cycles remain consistent over longer tool life. The result is fewer tool changes, more predictable production schedules and reduced downtime. Because the grade is tuned to cope with short, brittle chips common in cast iron, the machining process becomes more economical and stable in everyday turning operations. Geometry and chip control for reliable surface quality The triangle 60° geometry and 0.4 mm corner radius deliver a balance between strength and access to the cutting edge. The MW4 chipbreaker is engineered to form short, controlled chips during interrupted cuts and heavy cuts in casting materials, which reduces the risk of chip entanglement and improves process safety. A 7° clearance angle helps to avoid rubbing and supports a crisp cutting action, which in turn contributes to improved surface finish and dimensional consistency on each turned component. Practical handling and integration into production This indexable insert is supplied in the standard TCMT format and is compatible with indexable toolholders that accept the TCMT insert range; the T3 thickness ensures rigidity for many turning operations. For shops transitioning to a grade optimised for cast iron, the WKK20S insert offers straightforward implementation: its robustness reduces frequent regrinding, while predictable wear patterns simplify tool-change planning. For companies aiming to raise throughput without compromising component quality, this insert supports reproducible results in series production and jobbed work alike. Contact Metav Werkzeuge for tailored recommendations on toolholder pairing and inventory availability for Walter Tools’ Tiger·tec Silver inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: TCMT16T304-MW4-WKK20S-WALTER Label: Drehwendeschneidplatte TCMT16T304-MW4 WKK20S Walter Tools Product type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKK20S Chipbreaker: MW4 Shape: Triangle 60° Application: Cast iron (ISO group K) Facts Size: 16 mm Corner radius: 0.4 mm Clearance angle: 7° Thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Silver (coated cemented carbide) Optimised for abrasive cast-iron machining Short-chip behaviour for improved chip control Robust edge for interrupted cuts FAQ Is this insert suitable for all types of cast iron? The TCMT16T304-MW4 WKK20S is formulated for machining a wide range of cast-iron materials and performs well on abrasive grey and ductile cast iron within the ISO group K. What is the benefit of the MW4 chipbreaker? The MW4 chipbreaker on this Walter Tools insert produces short, controlled chips that reduce entanglement and improve process safety during turning of cast-iron components. How does the Tiger·tec Silver coating help in production? Tiger·tec Silver on the WKK20S grade enhances wear resistance against the abrasive nature of cast iron, extending tool life and ensuring more consistent machining results. Can the insert provide a good surface finish with a 0.4 mm radius? A 0.4 mm corner radius offers a compromise between edge strength and finishing capability; in many applications this geometry helps to achieve stable dimensional accuracy and an improved surface texture. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. The mention of brand names such as Walter Tools and Tiger·tec Silver serves explanatory purposes only and does not imply any affiliation. The offered item is original and factory-new.
TCMT16T304-MW4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a MW4 chipbreaker and a compact triangular geometry for reliable steel turning and predictable tool life. Order the insert directly via Metav Werkzeuge or consult the team for application advice. TCMT16T304-MW4 WPP20G — Indexable turning insert, triangle 60°, WPP20G (Walter Tools) TCMT16T304-MW4 WPP20G is a triangle 60° indexable insert for productive turning of steel components, optimised for stable chip control and consistent cutting-edge performance. Triangle 60° geometry for versatile turning Tiger·tec Gold coated carbide grade WPP20G MW4 chipbreaker for controlled chip formation 0.4 mm corner radius for repeatable edge life Higher throughput through predictable cutting performance The combination of a Tiger·tec Gold coating with the WPP20G grade delivers a robust, coated carbide cutting edge designed for the thermal and mechanical demands of steel turning. The insert’s geometry and coating reduce flank wear and maintain a stable cutting edge, which translates into fewer tool changes and more uninterrupted production time. For operators seeking quantifiable benefits, this means improved machine utilisation and more predictable component quality during series production. Stable chip control and surface finish from the right geometry A triangle 60° form with a MW4 chipbreaker offers dependable chip control in a wide range of cutting conditions. The chipbreaker design helps to break and evacuate swarf reliably, reducing the risk of chip entanglement and improving operator safety. Combined with a 0.4 mm corner radius, the insert supports consistent surface finish and dimensional repeatability on turned parts, making it suitable for both semi-finish and finish turning tasks in steel applications. Coating and grade engineered for steel (ISO P) machining The WPP20G grade belongs to the Tiger·tec Gold series and is a coated carbide formulation optimised for steels (ISO P). The coating system improves wear resistance while the substrate toughness counters chipping under variable cutting forces. In practise, this results in a balanced performance: enough wear resistance for longer life and sufficient toughness to withstand interruptions or slight feed variations. For production planners, the outcome is a cost-effective mix of life and reliability. Practical selection and integration into machining processes The insert’s designation and geometry make it straightforward to select replacements and set up toolholders compatible with triangular inserts. The standard relief angle and T3 thickness allow for rigid clamping and minimal vibration when mounted properly. For shops introducing these inserts into production, matching the MW4 chipbreaker to the workpiece material and adjusting feeds to account for the 0.4 mm corner radius will deliver the best balance of productivity and surface quality. Application advice and cutting data adjustments are available from the supplier to support process integration. For consistent performance in steel turning tasks, contact Metav Werkzeuge for Walter Tools Tiger·tec Gold inserts and tailored cutting data; email info@metav-werkzeuge.com or call +49 2822 7131930 for application support and ordering. Technical Data SKU: TCMT16T304-MW4-WPP20G-WALTER Article designation: TCMT16T304-MW4 ISO designation: TCMT16T304-MW4 WPP20G Product type: Indexable turning insert Facts Geometry: Triangle 60° Corner radius: 0.4 mm Relief angle: 7° Size: 16 Thickness: T3 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: MW4 Coating: Tiger·tec Gold (coated carbide) Application group: P (steel) Execution: T FAQ What materials is this insert designed for? The insert is specified for steel machining (ISO P); the WPP20G grade and Tiger·tec Gold coating are tuned for typical steel heat generation and chip formation. How does the MW4 chipbreaker affect machining? The MW4 chipbreaker promotes controlled chip formation and evacuation, improving swarf control and helping maintain consistent surface finish during turning. Which geometry parameters improve repeatability? The triangle 60° form combined with a 0.4 mm corner radius provides robust cutting edges and repeatable dimensional results, especially in serial turning operations. Can the insert tolerate interrupted cuts? The coated carbide WPP20G grade offers a balance of wear resistance and toughness suitable for many interrupted and continuous turning tasks in steel. Is this insert compatible with standard triangular toolholders? Yes, the designation and T3 thickness align with common triangular insert toolholders used in industry; correct clamping ensures rigidity and process stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is a brand of Walter AG, a leading manufacturer of precision tools for metalworking and part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned solely for explanation. There is no affiliation between our company and the referenced brands. The offered article is an original, factory-new product of the manufacturer.
TCMT16T304-MW4 WSM20S MW4 Wendeplatten - Walter Tools
Take advantage of the combination of Walter Tools' Tiger‑tec Silver coating and the MW4 chipbreaker for secure chip control and extended tool life — ideal for stainless steel and heat‑resistant alloys. Order directly via Metav Werkzeuge or consult the technical team for application‑specific recommendations. TCMT16T304-MW4 WSM20S — Turning insert (Triangle 60°), Tiger‑tec Silver, Walter Tools A TCMT16T304-MW4 WSM20S triangle insert engineered for reliable machining of stainless steel and heat‑resistant superalloys, offering stable cutting edges and predictable chip formation for production environments Tiger‑tec Silver coated carbide grade WSM20S MW4 chipbreaker for controlled chip formation 7° relief angle for stable cutting performance Triangle 60° form with 0.4 mm corner radius High process reliability for demanding materials The Tiger‑tec Silver coating combined with the WSM20S cemented carbide grade targets the specific challenges of machining stainless steel and heat‑resistant alloys. Coated carbide provides improved thermal resistance and wear protection, which results in longer tool life and fewer interruptions for tool changes. The coating and substrate choice promote stable edge retention, reducing the risk of built‑up edge and preserving dimensional accuracy in series production. These material and coating characteristics translate directly into higher process reliability and more consistent part quality in demanding applications. Precision geometry that improves surface finish and chip control The insert’s MW4 chipbreaker and Triangle 60° geometry control chip flow and cutting forces to benefit both roughing and semi‑finishing cuts. The 0.4 mm corner radius balances strength and finish capability, while the 7° relief angle reduces rubbing and heat generation at the contact point. Together, these features support improved surface integrity and predictable tool behaviour, which simplifies parameter selection and lowers the risk of unexpected rework. Clear chip control also reduces downtime caused by clogged evacuation paths on automatic lathes. Economic operation through fewer indexings and consistent performance Built for production, the insert’s geometry and coating reduce the frequency of indexing and replacement. The tolerance class M and the standard insert thickness T3 ensure interchangeability across compatible toolholders, easing logistics and inventory management. Fewer tool changes and longer-lasting cutting edges contribute to a measurable reduction in cycle interruptions and tooling costs per part. The combination of robust edge stability and reliable chip forming makes the insert a cost‑effective choice for shops seeking steady throughput when machining difficult alloys. Practical applicability and technical support for integration Compatibility with common triangular turning toolholders and the insert’s clear specification make this solution straightforward to integrate into existing tooling systems. The design supports machining strategies for facing, profiling and shoulder turning in stainless steel and nickel‑based alloys. For assistance with machining parameters, insert orientation or toolholder selection, Metav Werkzeuge’s technical advisers provide tailored guidance to ensure the insert performs optimally in the intended process. Practical application advice helps translate the insert’s technical strengths into production‑ready results. Contact Metav Werkzeuge today to discuss how Walter Tools’ Tiger‑tec Silver TCMT16T304‑MW4 WSM20S insert can increase process reliability in stainless steel and superalloy applications; Metav Werkzeuge’s technical team is available at info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations Technical data Article number: TCMT16T304-MW4-WSM20S-WALTER Product: Turning insert TCMT16T304-MW4 WSM20S (triangle) Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM20S Facts Relief angle: 7° Corner radius: 0.4 mm Insert size: 16 mm Thickness: T3 Tolerance class: M Special features Chipbreaker: MW4 Geometry: Triangle 60° Material/coating: coated carbide (Tiger‑tec Silver) Suitable for: stainless steel (ISO group M); heat‑resistant superalloys and titanium (ISO group S) Execution: T FAQ What materials is this insert intended for? The TCMT16T304‑MW4 WSM20S insert from Walter Tools is designed primarily for stainless steel (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), where thermal stability and edge integrity are critical. How does the MW4 chipbreaker affect machining? The MW4 chipbreaker on the TCMT16T304‑MW4 WSM20S promotes controlled chip formation and evacuation, which improves surface finish and reduces the likelihood of chip entanglement on automatic and CNC lathes. Can this insert be used for semi‑finishing and finishing operations? Yes. The combination of a 0.4 mm corner radius and Tiger‑tec Silver coating provides a balance between edge strength and surface quality, making the insert suitable for semi‑finishing and finishing passes in appropriate cutting conditions. Is the insert compatible with standard toolholders? The triangular 60° form and standard sizing (16 mm, thickness T3, tolerance class M) mean the insert fits compatible triangular turning toolholders that accept the TCMT series geometry. Where to get machining parameter advice for this insert? Metav Werkzeuge’s technical advisers can provide application‑specific recommendations for the TCMT16T304‑MW4 WSM20S insert, including cutting speeds, feeds and coolant strategies for stainless steel and superalloys. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanation; there is no affiliation between our company and the mentioned brands. The item offered is an original, factory‑new product of the manufacturer, Walter Tools.
TCMT16T304-RK4 WKK20S WKK20S Wendeplatten - Walter Tools
TCMT16T304-RK4 WKK20S — Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte von Walter Tools Die TCMT16T304 WKK20S ist eine beschichtete Hartmetall-Wendeschneidplatte der Serie Tiger·tec Silver, ausgelegt für die produktive Bearbeitung von Gusseisen. Hohe Prozesssicherheit bei Gussbearbeitung Tiger·tec Silver Beschichtung für lange Standzeit Dreieck 60° Geometrie für stabile Schneidkanten RK4 Spanbrecher optimiert für kurze, brechende Späne 7° Freiwinkel und 0,4 mm Eckenradius sorgen für Stabilität Wirtschaftliche Beschichtung reduziert Verschleiß und Stillstand Die Kombination aus Tiger·tec Silver Beschichtung und der Schneidstoffsorte WKK20S ist speziell auf abrasiven Verschleiß bei Gusswerkstoffen abgestimmt. Dadurch reduziert sich der Werkzeugverschleiß messbar, was Ausfallzeiten verringert und die Produktivität steigert. Anwender profitieren von konstanter Schneidkante und längeren Standzeiten, was sich direkt auf die Durchlaufzeiten und Werkzeugkosten auswirkt. Die Wendeschneidplatte eignet sich besonders für Serienprozesse in Gießereien und Lohnfertigungen. Präzise Geometrie für saubere Spanführung und Stabilität Die Dreieck 60° Form mit RK4 Spanbrecher sorgt für kontrollierte Spanbildung und sichere Spanabfuhr bei kurzen, brechenden Spänen. Der Freiwinkel 7° und der Eckenradius 0,4 mm liefern eine stabile Schneidkante, die Oberflächengüte verbessert und Nachbearbeitungsaufwand reduziert. Durch den kompakten Plattensitz TCMT16T304-RK4 bleibt die Aufspannung steif, was Vibrationen minimiert und die Bearbeitungsqualität erhöht. Anwendungsfokus und Zielgruppe Die Wendeschneidplatte ist für die Bearbeitung von Gusseisen (ISO K) optimiert und richtet sich an Fertigungsbetriebe, Werkzeugmacher und technische Dienstleister, die hohe Standzeiten und reproduzierbare Ergebnisse benötigen. Die Sorte WKK20S bietet eine ausgewogene Mischung aus Verschleißfestigkeit und Zähigkeit, ideal für wechselnde Schnittbedingungen und anspruchsvolle Serienfertigung. Dank der robusten Beschichtung ist die Platte auch bei höheren Zerspanungsvolumina wirtschaftlich. Mit der Tiger·tec Silver-Sorte WKK20S von Walter Tools gezielt Gusseisen fertigen; Beratung und Lieferung direkt über Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produkteigenschaften Artikelnummer: TCMT16T304-RK4-WKK20S-WALTER Marke: Walter Tools Serie: Tiger-tec Silver Produktart: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Sorte: WKK20S Toleranzklasse: M Fakten Freiwinkel: 7° Plattengröße: 16 Eckenradius: 0,4 Plattendicke: T3 Plattenform: Dreieck 60° Besonderheiten Spanbrecher: RK4 Schneidstoffklasse: beschichtetes Hartmetall Beschichtung: Tiger·tec Silver Bearbeitbar: Gusseisen (ISO K) Bezeichnung: TCMT16T304-RK4 WKK20S FAQ Für welche Werkstoffe ist die Wendeschneidplatte geeignet? Die TCMT16T304-RK4 WKK20S von Walter Tools ist speziell für die Bearbeitung von Gusseisen ausgelegt und bietet durch die Tiger·tec Silver Beschichtung optimierten Verschleißwiderstand bei abrasiven Werkstoffen. Welche Vorteile bringt der RK4 Spanbrecher in der Praxis? Der RK4 Spanbrecher der TCMT16T304-RK4 WKK20S sorgt für kurze, kontrollierte Späne, erleichtert die Spanabfuhr und reduziert Störungen im Fertigungsprozess, was die Effizienz erhöht. Ist die Wendeschneidplatte für Serienfertigung geeignet? Ja, die TCMT16T304-RK4 WKK20S von Walter Tools ist auf Prozesssicherheit und lange Standzeit ausgelegt, wodurch sie sich besonders für wiederkehrende Serienprozesse eignet. Wie wirkt sich der Eckenradius auf die Bearbeitung aus? Der Eckenradius 0,4 mm der TCMT16T304-RK4 WKK20S trägt zu stabiler Schneidkante und verbesserter Oberflächengüte bei, was Nachbearbeitung reduziert. Gibt es Empfehlungen für Schneiddaten bei Gusseisen? Für die TCMT16T304-RK4 WKK20S empfiehlt sich eine Anpassung der Schnittgeschwindigkeit und Zustellung an die Werkstückqualität; in vielen Fällen führt höhere Vorschubstabilität in Kombination mit der Tiger·tec Silver Beschichtung zu besseren Standzeiten. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT16T304-RM4 WMP20G RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, a precise 0.4 mm nose radius, and stable RM4 chip control for reliable turning in rostfreier Stahl; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TCMT16T304-RM4 WMP20G – Indexable turning insert, triangle 60°, for rostfreier Stahl (Walter Tools) TCMT16T304-RM4 WMP20G is a coated carbide indexable insert designed for turning applications in rostfreier Stahl, offering a balance of process security and tool life. Tiger·tec Gold coating for extended wear resistance RM4 chipbreaker for stable chip control Triangle 60° form, 0.4 mm nose radius Suitable for rostfreier Stahl (ISO group M) Greater process security when machining rostfreier Stahl The combination of the Tiger·tec Gold technology and the grade WMP20G provides a coated carbide solution optimised for the challenges of machining rostfreier Stahl. These materials tend to be tough and prone to built-up edge; the specialised coating reduces adhesion and thermal impact, which promotes stable cutting performance and longer intervals between index changes. The RM4 chipbreaker contributes to consistent swarf formation, lowering the risk of unpredictable tool loads and improving cycle reliability. Geometry designed for repeatable turning quality A triangle 60° plate shape with a 0.4 mm nose radius and a 7° clearance angle combines rigidity with the ability to produce good surface finish and repeatable profiles. The insert thickness T3 and size 16 mm ensure secure seating in compatible toolholders, supporting accurate positioning and stable cutting forces. The modest nose radius helps achieve a balance between surface quality and tool strength, especially under the medium to robust cutting conditions common when working with rostfreier Stahl. Economical performance and easy integration on the shop floor Using a coated grade such as WMP20G reduces tooling costs through longer usable life and predictable wear patterns. The insert’s construction and chip control minimise interruptions for rework or tool adjustment, enhancing throughput and reducing overall machining costs. As an indexable insert from Walter Tools, it integrates with standard clamping systems and is suitable for operations where consistent edge life and process security are priorities. Contact Metav Werkzeuge for application-specific recommendations or to request batch availability of TCMT16T304-RM4 WMP20G from Walter Tools; specialists at Metav Werkzeuge provide tailored advice and swift order handling. Technical data SKU: TCMT16T304-RM4-WMP20G-WALTER Designation: TCMT16T304-RM4 WMP20G Manufacturer: Walter Tools Product type: Indexable turning insert / cutting insert Grade: WMP20G Series: Tiger-tec Gold Numbers / Core technical data Plate form: Triangle 60° Plate size: 16 mm Plate thickness: T3 Nose radius: 0.4 mm Clearance angle: 7° Chipbreaker: RM4 Tolerance class: M Special features / Materials & applications Coating technology: Tiger·tec Gold (coated carbide) Material group suitability: rostfreier Stahl (ISO group M) Execution: T (top style variant) Robust indexable insert geometry for medium to robust cutting conditions FAQ Is this insert suitable for machining stainless steels? Yes. The TCMT16T304-RM4 WMP20G from Walter Tools is specifically graded and coated for rostfreier Stahl, providing improved chip control and wear resistance for those materials. What does the RM4 chipbreaker deliver in practice? The RM4 chipbreaker stabilises chip formation and evacuation during turning, which helps maintain consistent cutting forces and reduces the likelihood of built-up edge with the TCMT16T304-RM4 WMP20G insert. Can the insert produce a fine surface finish with a 0.4 mm nose radius? A 0.4 mm nose radius offers a compromise between strength and finish; when using the TCMT16T304-RM4 WMP20G with appropriate feeds and speeds, it supports good surface quality while preserving edge durability. Which toolholder form is recommended for this triangle insert? Triangle 60° indexable inserts are typically used in matching triangular toolholders; the TCMT16T304-RM4 WMP20G is designed for standard holders that accept 16 mm triangular inserts. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating on the WMP20G grade enhances wear resistance and thermal stability, resulting in longer usable life and more consistent performance when machining rostfreier Stahl. Hersteller: Walter Tools The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanation only and do not imply any affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the manufacturer.
TCMT16T304-RM4 WMP20S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WMP20S grade for secure chip control and extended edge life in stainless applications; the triangular 60° geometry with 0.4 mm corner radius delivers reliable surface quality. Order this insert directly via Metav Werkzeuge or consult the team for process-specific recommendations. TCMT16T304-RM4 WMP20S turning/boring indexable insert — triangle 60°, RM4 chipbreaker — Walter Tools TCMT16T304-RM4 WMP20S is a coated carbide indexable insert designed for drill/ream and turning tasks, optimised for rostfreier Stahl and medium to heavy-duty conditions Tiger·tec Silver coated grade WMP20S Optimised for rostfreier Stahl machining Triangle 60° form with 0.4 mm corner radius RM4 chipbreaker for secure chip control High process security for rostfreier Stahl machining The combination of the Tiger·tec Silver coating and the WMP20S carbide grade offers a balanced response to the typical machining challenges of rostfreier Stahl: material toughness, built-up edge tendency and heat generation. The coating reduces friction and supports stable chip formation, which translates into fewer interruptions and more predictable tool life. For operators unfamiliar with coating technology: Tiger·tec Silver is a multi-layer PVD/CVD-inspired system that enhances wear resistance and thermal stability, enabling consistent cutting performance under varying cutting speeds and feeds. Geometry and chip control that improve surface finish and cycle times The triangular 60° plate form combined with the RM4 chipbreaker and a 0.4 mm corner radius is engineered to produce short, controllable chips while maintaining a robust cutting edge. The 7° free or relief angle and the plate thickness T3 contribute to a stable cutting action and load distribution across the insert, which helps to reduce vibrations and protect the cutting edge during interrupted cuts. This geometry is particularly suitable where a fine surface finish and dimensional consistency are required in production turning and boring operations. Economical productivity through predictable edge life and versatile application Using a coated, purpose‑matched grade for rostfreier Stahl leads to lower tooling cost per part thanks to extended edge life and reduced rework. The RM4 chipbreaker and the plate’s geometry reduce downtime for chip-handling and enable reliable swarf evacuation in many toolholder systems. For process engineers looking to standardise tooling, this insert supports productive machining across a range of medium to robust cutting conditions and helps simplify grade selection for rostfreier Stahl operations. If additional cutting data or holder compatibility checks are required, Metav Werkzeuge’s technical advisors can provide process recommendations. Contact Metav Werkzeuge for targeted recommendations on integrating Walter Tools Tiger·tec Silver inserts into the production line — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number / SKU: TCMT16T304-RM4-WMP20S-WALTER Product designation: TCMT16T304-RM4 WMP20S Manufacturer: Walter Tools Series: Tiger·tec Silver Data Inscribed circle: 16 mm Corner radius: 0.4 mm Relief (free) angle: 7° Plate thickness: T3 Plate form: Triangle 60° Tolerance class: M Special features Grade / coating: WMP20S, Tiger·tec Silver coated carbide Chipbreaker: RM4 Application suitability: rostfreier Stahl Product type: Drill/ream and turning indexable insert FAQ What workpiece materials are recommended for this insert? The Walter Tools TCMT16T304-RM4 WMP20S insert is optimised for machining rostfreier Stahl and performs well under medium to robust cutting conditions. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker promotes secure chip formation and short chips, improving swarf control and reducing the risk of edge damage during rostfreier Stahl turning or boring. Which toolholders are compatible with the triangular TCMT insert? Triangular indexable holders designed for TCMT-type inserts are compatible; the insert’s 60° geometry is standard for many turning and boring tool families. What cutting-edge radius and relief angle should be considered for fine finishing? The insert’s 0.4 mm corner radius combined with a 7° relief angle delivers a balance between edge strength and surface finish for many finishing and semi-finishing operations. Is this insert suitable for interrupted cuts or heavy feed rates? The combination of the Tiger·tec Silver coating and the WMP20S grade provides enhanced edge robustness, making the insert suitable for many interrupted cuts and heavier engagement scenarios in rostfreier Stahl Manufacturer: Walter Tools; Headquarters: Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
TCMT16T304-RM4 WSM10S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of high thermal resistance, secure chip control and a compact triangle geometry for reliable turning and drilling operations in difficult-to-cut materials; order directly via Metav Werkzeuge or consult our specialists for application support. TCMT16T304-RM4 WSM10S turning insert — Walter Tools, Tiger·tec Silver grade, RM4 chipbreaker The TCMT16T304-RM4 WSM10S is a coated turning and drilling insert designed for heavy-duty machining of stainless steel and heat-resistant alloys, offering stable cutting edges and consistent chip control in demanding production environments Tiger·tec Silver coating performance Optimised for stainless steel and superalloys Triangle 60° insert with 0.4 mm corner radius RM4 chipbreaker for secure chip control Reliable edge integrity for challenging materials The Tiger·tec Silver grade WSM10S is formulated as a coated cemented carbide designed to withstand the thermal and mechanical stresses typical of machining stainless steel and high-temperature alloys. The combination of coating technology and carbide substrate increases resistance to heat and flank wear, which results in improved edge life and fewer tool changes. For process planners this translates into steadier cycle times and a reduced risk of built-up edge when confronting long, continuous cuts or interrupted feeds. Predictable chip formation and stable machining Equipped with an RM4 chipbreaker, the insert provides controlled chip shaping that supports safe evacuation of swarf in both turning and bore‑facing operations. The chipbreaker geometry promotes short, manageable chips under a wide range of cutting conditions, reducing the chance of entanglement and improving surface quality. As a direct benefit, machine downtimes related to chip clearing are minimised and operator handling becomes simpler, enhancing overall shop-floor efficiency. Compact geometry for versatile tool set-up The triangle 60° form and 0.4 mm corner radius deliver a balance between robustness and cutting precision. The triangular shape enables three effective cutting edges per indexable plate, while the modest corner radius supports fine surface finishes without sacrificing edge strength. A relief angle of 7° helps maintain an accurate cutting profile and reduces rubbing at the flank, which is particularly useful when addressing narrow shoulders or tight tolerances in shafts and bores. Application guidance and process benefits This insert is specified for S / M applications — that is, for heat-resistant superalloys and stainless steel — and is therefore recommended where high thermal loads and material ductility challenge standard grades. The coated design and dedicated chipbreaker mean the insert performs well under higher cutting speeds and in operations requiring consistent surface integrity. Process engineers will appreciate the grade’s focus on repeatable performance, enabling predictable tool life forecasts and straightforward sort allocation in production planning. Contact Metav Werkzeuge for availability and process consultancy on Walter Tools inserts and application recommendations Technical data Article number: TCMT16T304-RM4-WSM10S-WALTER Designation: TCMT16T304-RM4 WSM10S Product type: Drilling/bore turning insert / turning insert Manufacturer: Walter Tools Series: Tiger-tec Silver Facts Insert size: 16 mm Relief angle: 7° Corner radius: 0.4 mm Plate thickness: T3 Shape: Triangle 60° Tolerance class: M Special features Coating / grade: WSM10S (Tiger·tec Silver) Chipbreaker: RM4 Material groups: S (superalloys, titanium) and M (stainless steel) Substrate: coated cemented carbide Intended use: heavy machining of difficult-to-cut materials FAQ What materials is this insert suitable for? The TCMT16T304-RM4 WSM10S insert is specified for S and M groups, meaning it is suitable for heat-resistant superalloys and stainless steel, offering thermal stability and controlled wear behaviour. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker shapes chips into short, controllable segments, improving swarf evacuation and lowering the risk of chip entanglement during turning and drilling operations with the insert. What advantages does the Tiger·tec Silver grade provide? Tiger·tec Silver (WSM10S) combines a robust coated substrate with thermal-resistant properties, delivering longer tool life and consistent edge behaviour when machining challenging materials. Can the triangle geometry be indexed multiple times? Yes, the triangle 60° form provides three usable cutting edges per insert, enabling cost-effective indexing and straightforward edge replacement during scheduled tool maintenance. Is this insert suitable for finishing passes? With a 0.4 mm corner radius and the 7° relief angle, the insert is capable of producing good surface finishes in semi-finish and certain finish operations when cutting parameters are optimised. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; support@walter-tools.com Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are cited for explanation only and do not imply any affiliation with our company. The item offered is an original, factory-new product from the manufacturer.
TCMT16T304-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Achieve consistent chip control and extended edge life by combining the Tiger‑tec Silver coated grade WSM20S with the RM4 chipbreaker and a robust 0.4 mm corner radius; order directly via Metav Werkzeuge or consult our specialists for process integration. TCMT16T304-RM4 WSM20S — triangle turning/drilling indexable insert for stainless steels & superalloys (Tiger‑tec Silver) — Walter Tools TCMT16T304-RM4 WSM20S is a triangular indexable insert designed for demanding machining of stainless steels and heat‑resistant superalloys Triangle 60° indexable insert Tiger‑tec Silver coating for heat resistance RM4 chipbreaker for controlled chips 7° clearance; 0.4 mm corner radius Reliable cutting performance for difficult materials The coated carbide grade WSM20S, part of the Tiger‑tec Silver series, is engineered to handle the thermal and mechanical demands of ISO group M (rostfreie Stähle / stainless steels) and S (superalloys and titanium). The combination of a high‑temperature resistant coating and a stable substrate promotes predictable chip formation and reduced tendency for built‑up edge, which directly lowers scrap rates and interrupts fewer production cycles. For shop floors seeking measurable process stability, this insert offers longer tool life and consistent surface quality under elevated cutting temperatures. Geometry that balances strength and surface finish The triangular 60° shape provides three usable cutting corners, while the 0.4 mm corner radius increases edge strength without sacrificing finish when set to appropriate feeds. The 7° clearance angle reduces rubbing and heat generation at the flank, improving dimensional repeatability on turned features. The plate thickness T3 and size designation 16 contribute to mechanical robustness in interrupted or heavy‑cut conditions. These geometric choices ensure a practical compromise between resistance to edge chipping and the capacity to achieve fine surface tolerances in stainless steels and high‑temperature alloys. Process advantage and application focus Equipped with the RM4 chipbreaker, the insert promotes short, manageable chips across a range of cutting parameters, aiding chip evacuation and tool‑holder life. The tolerance class M supports consistent seat fitment and repeatability during index changes. The design suits precision engineering environments and production turning operations where reproducible results and low downtime are priorities. The TCMT16T304‑RM4 insert from Walter Tools delivers a combination of thermal resistance, chip control, and mechanical stability that benefits both serial production and jobbing work on difficult‑to‑cut materials. For reliable machining of stainless steels and superalloys, choose the Walter Tools Tiger‑tec Silver TCMT16T304‑RM4 WSM20S insert and contact Metav Werkzeuge for tailored process advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: TCMT16T304-RM4-WSM20S-WALTER Designation: TCMT16T304-RM4 WSM20S Product type: Drill/boring and turning indexable insert Brand: Walter Tools Series: Tiger‑tec Silver Facts Plate size: 16 Corner radius: 0.4 mm Clearance angle: 7° Plate form: Triangle 60° Thickness: T3 Tolerance class: M Special features Coating / grade: Tiger‑tec Silver (WSM20S) Coated carbide insert Chipbreaker: RM4 Material applicability: M (stainless steels), S (superalloys / titanium) Suitable for demanding machining and elevated cutting temperatures FAQ What materials is this insert suited for? The TCMT16T304‑RM4 WSM20S insert is optimised for ISO group M (rostfreie Stähle / stainless steels) and S (superalloys and titanium), where heat resistance and edge stability are essential. How does the RM4 chipbreaker help in production? The RM4 chipbreaker on this Walter Tools insert produces short, controlled chips that improve evacuation, reduce tool‑holder wear and support continuous, interruption‑free machining cycles. What benefit does the Tiger‑tec Silver grade provide? Tiger‑tec Silver coating increases thermal resistance and reduces adhesion on the cutting edge, resulting in extended tool life and more consistent surface quality when machining difficult alloys. Is the insert available in other geometries or radii? This SKU is a triangular 60° insert with a 0.4 mm corner radius and thickness T3; alternative geometries or radii may be available under different designations from Walter Tools. What does tolerance class M mean for assembly? Tolerance class M indicates a medium tolerance standard for seat fit and repeatability, ensuring reliable index changes and consistent positioning in compatible tool holders. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners and are mentioned here for explanation only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product of the stated manufacturer (Walter Tools).
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com