TCMT16T304-RM4 WSM30S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, controlled chip formation and consistent edge stability to increase process security in demanding turning and boring operations; order the insert directly via Metav Werkzeuge or consult the specialists for machining recommendations. TCMT16T304-RM4 WSM30S — turning/boring indexable insert (Tiger·tec Silver) by Walter Tools A TCMT16T304-RM4 WSM30S triangular insert engineered for heavy-duty cutting of stainless steel and heat-resistant superalloys, suited to turning and boring applications where chip control and tool life are decisive Tiger·tec Silver coated grade WSM30S Optimised RM4 chipbreaker for stable chips Triangular 60° shape with 0.4 mm radius Designed for stainless and superalloys Consistent performance for tough-to-cut materials The combination of the WSM30S coated carbide grade and the Tiger·tec Silver technology provides reliable wear resistance and improved thermal stability during machining of austenitic stainless steel and high-temperature alloys. The coating system reduces diffusion and protects the cutting edge under elevated temperatures, which in turn extends productive tool life. This results in fewer interruptions for insert changes and a more predictable process window, supporting sustained throughput in batch and single-piece production alike. Reliable chip control and surface quality The RM4 chipbreaker geometry is designed to produce short, controllable chips when machining sticky or work-hardening materials. Controlled chip formation reduces the risk of chip entanglement and protects the workpiece surface, helping to maintain consistent finish quality. For operations where surface integrity and repeatability matter, the combination of chipformer and coated substrate supports steady cutting forces and minimises unwanted built-up edge formation. Geometry optimised for secure clamping and edge strength The insert’s triangular 60° shape with a corner radius of 0.4 mm and a 7° relief angle balances edge strength with versatility in turning and boring setups. The T3 plate thickness and standard ISO designation make the insert compatible with a wide range of standard tool holders, ensuring stable seating and repeatable indexability. Robust geometry contributes to shock resistance and predictable wear patterns, which simplifies process planning and tool-change intervals. Practical benefits for workshop productivity Adopting this grade and geometry can shorten setup validation time and improve tool life in series production. The insert is particularly suitable for components made from stainless steel and nickel-based alloys where thermal loads and tenacity compromise conventional grades. By choosing this combination of coating and chip control, machining cycles become more economical through reduced downtime, less scrap and more consistent dimensional stability on finished parts. Discuss Walter Tools Tiger·tec Silver inserts with Metav Werkzeuge for tailored machining strategies and order guidance — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to request cutting-data recommendations or compatibility checks Technical data SKU: TCMT16T304-RM4-WSM30S-WALTER ISO designation: TCMT16T304-RM4 WSM30S Product type: turning/boring indexable insert Series: Tiger·tec Silver Core figures Grade: WSM30S Shape: triangular 60° Corner radius: 0.4 mm Relief angle: 7° Size: 16 Thickness: T3 Chipbreaker: RM4 Tolerance class: M Execution: T Special features Coated cemented carbide (Tiger·tec Silver technology) Optimised for stainless steels (ISO group M) Suitable for heat-resistant superalloys and titanium (ISO group S) Stable chip formation and edge stability Designed for turning and boring operations FAQ What materials is this insert suitable for? The TCMT16T304-RM4 WSM30S insert is designed primarily for stainless steel (ISO group M) and also for heat-resistant superalloys and titanium (ISO group S), offering thermal stability and controlled chip formation. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating enhances thermal resistance and reduces diffusion wear on the cutting edge, which increases tool life and maintains cutting performance under elevated temperatures when machining tenacious materials. Which tool holders are compatible with this triangular insert? Standard ISO tool holders for triangular turning/boring inserts that accept a 16 mm inscribed size and T3 thickness are compatible; the insert’s geometry ensures secure clamping and repeatable indexing. What advantage does the RM4 chipbreaker provide? The RM4 chipformer produces short, controllable chips that reduce entanglement and help protect the workpiece surface, improving process security and finish consistency in demanding materials. Is the corner radius suitable for finishing operations? With a 0.4 mm corner radius, the insert balances edge strength and surface finish capability; it is suitable for a range of semi-finishing and light-finishing conditions depending on cutting parameters. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The item offered is an original, brand-new product of the manufacturer. Manufacturer/Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
TCMT16T304-RP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WPP10G grade for high process security and extended tool life; the insert’s RP4 chipbreaker and 60° triangular form ensure consistent chip control when machining steel. Order directly via Metav Werkzeuge or consult the Metav team for application support and availability. TCMT16T304-RP10G WPP10G Triangle 60° indexable insert for steel machining — Tiger‑tec Gold (Walter Tools) TCMT16T304-RP4 WPP10G is a triangular 60° indexable insert engineered for reliable turning and boring performance in steel applications, combining a wear-resistant coating with a proven chip control geometry. Tiger‑tec Gold coating for long tool life Optimised RP4 chipbreaker for reliable chips 60° triangular form with 0.4 mm corner radius Specifically for steel machining (ISO P) Consistent productivity through optimised cutting geometry The combination of the Tiger‑tec Gold coating and the WPP10G grade yields a balanced performance tailored to the thermal and mechanical demands of steel machining. The RP4 chipbreaker is designed to generate predictable chip forms, reducing interaction with the workpiece and stabilising machining conditions. The triangular 60° form delivers three active cutting edges per index, which contributes to cost efficiency through multiple edge reuses. In practice, shops can expect improved cycle-time stability and fewer interruptions for chip management, supporting smoother production flows and higher overall equipment effectiveness. Durability and wear protection for repetitive operations A coated carbide substrate offers a consistent barrier against abrasive and adhesive wear mechanisms common in turning operations. The layer technology behind Tiger‑tec Gold supports a robust cutting edge that maintains form under thermal load, which in turn extends the tool life and reduces frequency of index changes. The small 0.4 mm corner radius helps to maintain edge strength while enabling acceptable surface finish in standard steel grades. These characteristics make the insert suitable where repeatability and low downtime are priorities, especially in batch production or continuous-turning environments. Compatibility and practical application guidance Designed for the ISO P group, this indexable insert is intended primarily for various steel grades, including unalloyed and alloyed steels. The marking and geometry indicate suitability for medium to high cutting speeds where stable chip formation is required. The indexable insert is available in size 16 with thickness T3 and fits toolholders matching the TCMT family. For application planning, select cutting parameters aligned with the recommended steel machining ranges and monitor edge condition at tool-changes to exploit the full advantage of the RP4 chip control and coated substrate. For high-productivity steel turning with Tiger‑tec Gold performance, contact Metav Werkzeuge for availability and tailored toolholder pairing to match production requirements. Technical Data Article number: TCMT16T304-RP4-WPP10G-WALTER Description: Triangle indexable insert TCMT16T304-RP4 WPP10G Manufacturer: Walter Tools Grade: WPP10G Series: Tiger‑tec Gold Form: Triangle 60° Chipbreaker: RP4 Core data Insert size: 16 mm Corner radius: 0.4 mm Clearance angle: 7° Thickness: T3 Tolerance class: M Special features Coated carbide (Tiger‑tec Gold) Optimised chip control geometry RP4 Designed for ISO P (steel) applications Triangular 60° plate with multiple cutting edges FAQ Is this insert suitable for stainless steel? The TCMT16T304-RP4 WPP10G from Walter Tools is specified for ISO P (steel) applications; stainless steel suitability is not listed for this grade. How many cutting edges are available per insert? The triangular 60° form provides three usable cutting edges on the TCMT16T304-RP4 WPP10G indexable insert. What does the RP4 chipbreaker support in practice? RP4 is designed to produce reliable, short to medium chip forms during turning, improving chip evacuation and process stability when machining steel. Can the TCMT16T304-RP4 be used in boring heads as well as turning holders? The insert geometry and designation allow use in compatible turning and certain boring applications; confirmation of holder compatibility is advised before use. What thickness and tolerance class are specified? The insert is T3 thickness with a tolerance class of M as supplied for TCMT16T304-RP4 WPP10G. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Mention of brand names such as Walter Tools is for identification and explanatory purposes only and does not imply any affiliation between Metav Werkzeuge and the brand owners.
TCMT16T304-RP4 WPP20G T Wendeplatten - Walter Tools
Optimise turning and boring operations with the coated carbide grade WPP20G and the RP4 chipbreaker for consistent chip control and extended edge life. Order the TCMT16T304-RP4 WPP20G directly via Metav Werkzeuge or consult our specialists for process recommendations. TCMT16T304-RP4 WPP20G – Triangle 60° indexable insert with Tiger·tec Gold coating by Walter Tools The TCMT16T304-RP4 WPP20G is a triangle 60° indexable insert for turning and boring, engineered for high-performance machining of steel components. Tiger·tec Gold coated carbide grade WPP20G RP4 chipbreaker for controlled chip formation Triangle 60° form for versatile turning 0.4 mm corner radius, 7° relief angle Reliable performance for steel machining The insert combines a coated carbide substrate with Walter Tools’ Tiger·tec Gold technology to deliver consistent edge life when machining steels (material group P). The WPP20G grade is formulated for the typical heat and chip-formation behaviour of steel, offering a balanced mix of wear resistance and toughness. In practice, this means fewer interruptions for tool changes, more predictable tool costs and a stable process window for medium to high cutting speeds. The technical design supports repeatable part quality and helps to maintain cycle time targets. Geometry that stabilises cutting and improves finish A triangular 60° shape with a 0.4 mm corner radius and a 7° relief angle provides a robust cutting edge and good strength in interrupted cuts. The RP4 chipbreaker is designed to control chip flow reliably across a range of feeds, breaking chips into manageable segments and reducing the risk of tangling or surface damage. For operators less familiar with chipbreaker design: the RP4 groove redirects and compresses the chip to encourage short, controllable chips, which simplifies swarf handling and reduces contaminant-related surface marks. Shop-floor advantages and process gains The insert’s T3 thickness and tolerance class M contribute to secure clamping and long-term repeatability in toolholders that accept the TCMT format. Stable clamping, combined with the grade’s wear resistance, reduces downtime and increases average tool life, yielding lower cost per component. Improved chip control from the RP4 geometry lowers manual cleaning and handling time, while the triangular form offers three usable cutting edges, extending service intervals and improving overall productivity in batch and single-piece production alike. Flexible integration and application scope Designed primarily for steel applications (ISO group P), this indexable insert suits a wide variety of turning and boring tasks where a balance of productivity and surface quality is required. The WPP20G grade is a universal choice within the Tiger·tec Gold family, enabling consistent results across commonly used steels without the need for frequent grade swaps. As a Walter Tools product, the insert benefits from a development focus on process stability and reproducible tool life, making it suitable for both jobbing shops and production lines that demand dependable performance. For application advice or to place an order for Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 — our team will recommend the optimum insert and grade for the intended steel and machining parameters. Technical data Article number: TCMT16T304-RP4-WPP20G-WALTER Item designation: TCMT16T304-RP4 WPP20G Product type: Boring/enlarging and turning indexable insert Manufacturer: Walter Tools Facts Plate size: 16 mm Corner radius: 0.4 mm Relief/clearance angle: 7° Plate thickness: T3 Plate form: Triangle 60° Tolerance class: M Special features Series: Tiger·tec Gold Grade/sort: WPP20G Chipbreaker: RP4 Base material/application: suitable for steel (P according to ISO 513) Designation without grade: TCMT16T304-RP4 ISO designation: TCMT16T304-RP4 WPP20G Execution: T FAQ Which materials is this insert suitable for? The TCMT16T304-RP4 WPP20G insert is designed primarily for machining steel (ISO group P); the WPP20G grade is optimised for the heat and chip-formation typical of steel. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker on the TCMT16T304-RP4 WPP20G produces short, controlled chips that simplify swarf handling and reduce surface contamination, improving process reliability. Is the triangular form suitable for heavy-duty cuts? The triangle 60° form with a 0.4 mm corner radius provides a robust edge for many turning and boring operations; the insert supports interrupted and steady cuts with a favourable balance of strength and edge life. Can this insert be used in standard TCMT toolholders? Yes, the TCMT16T304-RP4 WPP20G follows the TCMT format and is compatible with toolholders designed for that insert designation, offering three indexed cutting edges for extended service. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (brand: Walter Tools) with headquarters in Tübingen is among the leading manufacturers of precision tools for metalworking. Protected trademarks and product names belong to their respective owners. Mention of brand names serves explanation only; there is no affiliation implied. The offered item is an original, factory-new product of the manufacturer.
TCMT16T304-RP4 WPP30G WPP30G Wendeplatten - Walter Tools
Benefit from high productivity and extended tool life thanks to the Tiger‑tec Gold coating and the efficient RP4 chipbreaker; the insert is optimised for steel machining and its 0.4 mm corner radius ensures consistent edge stability — order via Metav Werkzeuge or consult the specialists for cutting data and delivery options. TCMT16T304-RP4 WPP30G — Turning insert, Tiger‑tec Gold coating, for steel | Walter Tools A TCMT16T304-RP4 WPP30G indexable insert designed for steel machining, combining a robust triangle 60° geometry with a chipbreaker tuned for predictable chip formation. Tiger·tec Gold coating for extended life Optimised for steel machining Triangle 60° insert geometry 0.4 mm corner radius for stable edges Increase throughput through controlled chip formation The combination of the Tiger‑tec Gold coating and the RP4 chipbreaker delivers predictable chip breakage and reduced cutting forces, which translates into higher process efficiency and longer uninterrupted running times. For operations where cycle time matters, the coating reduces flank wear and improves resistance to adhesive and abrasive wear, while the chipbreaker maintains short, controllable chips for safe evacuation. These characteristics support a smooth production flow and fewer tool changes, improving overall tool utilisation and lowering machining costs per part. Secure edges and consistent accuracy with proven geometry A triangle 60° insert shape with a 0.4 mm corner radius and a 7° clearance angle provides a balance between strength and accessibility in interrupted cuts and general turning. The modest corner radius increases edge stability under variable loads, reducing the risk of chipping during hard engagement, while the 7° relief minimises rubbing and heat build-up. This geometry is particularly effective in finishing and medium-depth turning where surface quality and dimensional repeatability are priorities, resulting in reliable component tolerances and reduced rework. Versatile performance for steel applications with reliable wear behaviour Specifically suited to the ISO P material group, this grade delivers a mix of wear resistance and toughness appropriate for a wide range of steels, from unalloyed to alloyed grades. The WPP30G coated carbide offers consistent performance across varying cutting conditions and supports both continuous and semi‑continuous cut regimes. As a Walter Tools product, the insert benefits from tested coating technology and manufacturing standards, contributing to reproducible tool life and steady process parameters — a practical choice for production environments seeking predictable results and reduced downtime. For productive steel turning with dependable chip control and extended tool life, contact Metav Werkzeuge to discuss Walter Tools inserts, cutting parameters and rapid delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: TCMT16T304-RP4-WPP30G-WALTER Description: Turning / boring indexable insert TCMT16T304-RP4 WPP30G Manufacturer: Walter Tools Series: Tiger‑tec Gold Core specifications Clearance angle: 7° Corner radius: 0.4 mm Insert form: Triangle 60° Insert size: 16 mm Thickness: T3 Tolerance class: M Chipbreaker: RP4 Materials & applications Suitable for steel (ISO P) Cutting material: coated carbide (WPP30G) Coating technology: Tiger‑tec Gold Intended operations: turning and boring FAQ What materials is the TCMT16T304-RP4 WPP30G best suited for? The TCMT16T304-RP4 WPP30G is optimised for steel (ISO P) applications and provides a balance of wear resistance and toughness for unalloyed and alloyed steels. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker on this Walter Tools insert produces short, controllable chips and reduces the risk of built-up edge, improving surface finish and process stability. What benefits does the Tiger‑tec Gold coating provide? Tiger‑tec Gold coating enhances flank wear resistance and reduces adhesive wear, resulting in longer tool life and more consistent machining results with the TCMT16T304-RP4 WPP30G. Is the insert geometry suitable for interrupted cuts? Yes, the triangle 60° form combined with the 0.4 mm corner radius offers robust edge strength suitable for interrupted turning and general finishing. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT16T308-FK6 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver wear resistance, an FK6 chipbreaker for controlled chip formation, and a compact triangular geometry to achieve reliable cast iron turning with low downtime; order directly via Metav Werkzeuge or consult our specialists for application guidance. TCMT16T308-FK6 WKK20S indexable insert for cast iron machining — Walter Tools A TCMT16T308-FK6 WKK20S indexable insert designed for turning and boring operations, optimised for cast iron machining and equipped with Tiger·tec Silver coating for extended tool life Tiger·tec Silver coating for wear resistance Optimised for cast iron machining (ISO K) Triangle 60° form with 0.8 mm corner radius FK6 chipbreaker for reliable chip control High productivity and predictable tool life for cast iron components The coated carbide grade is engineered for abrasive cast iron applications: the WKK20S grade within the Tiger·tec Silver family balances hardness and toughness to reduce flank wear and maintain a stable cutting edge. This results in a consistent tool life and fewer unexpected changeovers, which supports uninterrupted batch production. The dedicated chip control design mitigates short, brittle chips typical of cast materials, reducing the risk of tool clogging and machine interruptions while maintaining surface integrity on the workpiece. Geometry and tolerances that support repeatable accuracy A robust triangle 60° form with a 0.8 mm corner radius and 7° clearance provides an optimal compromise between edge strength and finishing capability. The insert’s T3 thickness and tolerance class M ensure precise seating in compatible toolholders, which reduces indexing errors and contributes to constant dimensional results. The relatively large corner radius helps absorb cutting forces during interrupted cuts, improving edge stability and surface finish without sacrificing component tolerances. Seamless integration into production systems and selection advice The FK6 chipbreaker is tailored for the fracture-prone chips of grey and nodular cast irons (ISO group K), promoting short, controllable chips under typical turning parameters. The insert is suitable for both roughing and finishing passes when appropriate feeds and speeds are selected. When specifying tooling, match the insert seat and clamping system to the triangular 60° form to ensure correct clamping and heat dissipation; compatible toolholders for turning and boring will accept the indexable geometry and allow straightforward re-indexing for minimal set-up time. For applications requiring predictable wear behaviour and broad cast iron coverage, this grade offers a practical balance of economy and performance. For reliable cast iron performance with Walter Tools’ Tiger·tec Silver grade, contact Metav Werkzeuge for tailored application support and fast supply — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: TCMT16T308-FK6-WKK20S-WALTER Product label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte TCMT16T308-FK6 WKK20S Walter Tools Manufacturer: Walter Tools Facts Insert size: 16 Thickness: T3 Clearance angle: 7° Corner radius: 0.8 mm Shape: Triangle 60° Grade: WKK20S Special features Coating technology: Tiger·tec Silver Chipbreaker: FK6 Series: Tiger-tec Silver Tolerance class: M Material group suitability: K (cast iron) FAQ What materials is this insert best suited to machine? The TCMT16T308-FK6 WKK20S is optimised for cast iron applications (ISO group K); the WKK20S grade and Tiger·tec Silver coating address the abrasive and brittle nature of these materials. What are the key geometric specifications of the insert? The insert has a triangle 60° form, size 16, T3 thickness, 0.8 mm corner radius and 7° clearance, which together ensure a stable cutting edge and consistent seating in compatible toolholders. Which chipbreaker is fitted and what benefit does it provide? The FK6 chipbreaker delivers controlled, short chips when turning cast iron, improving chip evacuation and reducing the likelihood of built-up edge or clogging during operation. Can this insert be used for both turning and boring operations? Yes, the product is designed as an indexable insert for turning and boring; correct toolholder matching is important to ensure secure clamping and optimal heat dissipation with the TCMT16T308-FK6 WKK20S. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, brand-new merchandise from the manufacturer.
TCMT16T308-FM4 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold performance, a reliable FM4 chipbreaker, and a robust 0.8 mm corner radius for consistent productivity when machining rostfreier Stahl; order precision inserts via Metav Werkzeuge or consult the sales team for application advice. TCMT16T308-FM4 WMP20G triangular 60° indexable insert — Tiger·tec Gold grade for rostfreier Stahl (Walter Tools) The TCMT16T308-FM4 WMP20G is a triangular turning and drilling indexable insert engineered for medium to robust machining of rostfreier Stahl, combining a coated carbide substrate with a dedicated chipbreaker for stable cutting performance. Tiger·tec Gold coated grade WMP20G Designed for rostfreier Stahl machining Triangular 60° insert, 0.8 mm corner radius 7° relief angle with FM4 chipbreaker Increased cutting reliability for rostfreier Stahl applications The combination of the WMP20G grade and the Tiger·tec Gold series delivers improved resistance to work-hardening and thermal loading common in rostfreier Stahl. The coated carbide structure supports stable chip formation and maintains a reliable cutting edge under demanding conditions. The integrated FM4 chipbreaker promotes predictable chip control, which reduces the risk of built-up edge and protects both the tool and the workpiece surface. For production environments where repeatability matters, this insert helps to keep cycle times steady and tool-change frequency low. Geometry that balances edge strength and surface quality A triangular 60° form with a 0.8 mm corner radius offers a compromise between robustness and finish: the radius increases edge strength for interrupted cuts and heavier feeds, while the insert geometry still allows fine surface quality when used with appropriate feeds and speeds. The 7° relief angle supports lower cutting forces on the flank and contributes to a consistent machining allowance. These geometric features make the insert suitable for both axial turning and light boring operations where a reliable edge and consistent dimensional control are required. Productivity and integration in demanding toolpaths Built as a coated carbide insert from the Tiger·tec Gold family, this grade is optimised for long tool life and stable machining in rostfreier Stahl. The FM4 chipbreaker is tuned for medium-to-robust cutting conditions, helping to avoid chip entanglement and improving process security on automated lathes and multi-task machines. Integration into standard toolholders is straightforward using the ISO designation; the insert supports process standardisation, enabling predictable tool management and easier batch planning. For teams aiming to improve throughput while keeping surface quality and repeatability high, this insert is a pragmatic choice. For application recommendations or to secure genuine Walter Tools TCMT16T308-FM4 WMP20G inserts, contact Metav Werkzeuge for specification guidance and prompt supply: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: TCMT16T308-FM4-WMP20G-WALTER Designation: TCMT16T308-FM4 WMP20G Manufacturer: Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Facts Corner radius: 0.8 mm Relief angle: 7° Insert size: 16 Plate thickness: T3 Insert form: Triangle 60° Special features Series: Tiger·tec Gold Grade: WMP20G (coated carbide) Chipbreaker: FM4 Suitable for: rostfreier Stahl FAQ Which materials is this insert best suited for? The TCMT16T308-FM4 WMP20G insert is specifically designed for rostfreier Stahl and performs best in medium to robust stainless-steel machining conditions thanks to the Tiger·tec Gold grade. What advantage does the FM4 chipbreaker provide? FM4 promotes controlled chip formation and efficient chip evacuation; when combined with the Tiger·tec Gold coating on the TCMT16T308-FM4, it reduces the likelihood of built-up edge and improves process stability. How does the 0.8 mm corner radius affect performance? A 0.8 mm radius increases edge robustness and reduces chipping risk during interrupted cuts, while still permitting acceptable surface finishes at appropriate feeds and speeds with the TCMT16T308-FM4 geometry. Is this insert suitable for both turning and boring operations? Yes, the TCMT16T308-FM4 WMP20G is an indexable insert intended for turning and certain boring/upboring tasks where the triangular form and grade match the cutting conditions. What benefits does the Tiger·tec Gold series add? Tiger·tec Gold coating enhances wear resistance, thermal stability and edge retention, extending tool life and supporting consistent machining results in rostfreier Stahl applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, brand-new goods from the manufacturer. The brand Walter Tools is used where appropriate.
TCMT16T308-FM4 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver wear resistance and the FM4 chipbreaker geometry to secure consistent chip control and longer edge life in rostfreier Stahl applications; order the inserts directly via Metav Werkzeuge or consult our team for machining advice. TCMT16T308-FM4 WMP20S – Turning and drilling insert, Tiger‑tec Silver, for rostfreier Stahl | Walter Tools The TCMT16T308-FM4 WMP20S is a triangular 60° indexable insert designed for turning and light boring operations, offering a coated cemented‑carbide grade optimised for rostfreier Stahl and medium to heavy duty use. Tiger‑tec Silver grade WMP20S Triangular 60° form for stable seating FM4 chipbreaker for secure chip control 0.8 mm corner radius for robust edges Increased process stability where it matters The combination of the WMP20S grade and Tiger‑tec Silver coating delivers balanced wear resistance and thermal stability specifically for rostfreier Stahl machining. The coated cemented‑carbide composition supports a predictable cutting edge under the heat and work‑hardening typical of austenitic stainless steels. The FM4 chipbreaker actively shapes chips to reduce entanglement and vibration, which helps maintain surface finish and lowers the risk of built‑up edge. By selecting this insert, workshops gain a measurable improvement in cycle consistency and fewer unplanned interventions during serial turning. Geometry that reduces tool changes and downtime A triangle 60° form and a 0.8 mm corner radius provide a robust cutting edge that tolerates occasional interrupted cuts and offers good load distribution. The insert’s 7° clearance angle reduces rubbing on flank faces while keeping cutting forces manageable; the nominal 16 mm inscribed circle and T3 thickness ensure secure clamping in standard toolholders. These geometric choices mean fewer indexings and a more economical use of each insert, so set‑ups remain stable and predictable. For operations where repeatability matters, the engineered geometry contributes directly to shorter non‑productive time. Practical application and machining guidance The FM4 chipbreaker and the WMP20S composition are intended for rostfreier Stahl where chip control and edge robustness are priorities. In practice, start with moderate cutting speeds and increased coolant flow when machining heat‑sensitive alloys; the coated grade tolerates elevated temperatures but benefits from consistent cooling. The insert is suitable for both conventional and high‑volume turning cells where stable edge life and reproducible results are required. Walter Tools’ production standards and the Tiger‑tec Silver technology together support efficient metal removal with an emphasis on steady process windows and achievable surface qualities. Contact Metav Werkzeuge today for tailored machining recommendations or to secure TCMT16T308-FM4 WMP20S inserts for rostfreier Stahl work: eMail info@metav-werkzeuge.com, Tel +49 2822 7131930 Technical data SKU: TCMT16T308-FM4-WMP20S-WALTER Designation: TCMT16T308-FM4 ISO designation: TCMT16T308-FM4 WMP20S Manufacturer: Walter Tools Facts Insert shape: Triangle 60° Inscribed circle: 16 mm Thickness: T3 Clearance angle: 7° Corner radius: 0.8 mm Special features Grade: WMP20S Series: Tiger‑tec Silver Chipbreaker: FM4 Application: rostfreier Stahl Execution: T FAQ What materials is this insert intended for? The TCMT16T308-FM4 WMP20S insert is designed primarily for rostfreier Stahl; the WMP20S grade and Tiger‑tec Silver coating support secure chip formation in stainless applications. Can the insert be used for both turning and boring? Yes, this indexable insert is suitable for turning and light drilling/boring operations when mounted in the appropriate Walter Tools toolholder. How does the FM4 chipbreaker help in machining? The FM4 chipbreaker on the TCMT16T308-FM4 WMP20S shapes and controls chips to reduce entanglement and vibration, improving surface finish and tool life in rostfreier Stahl cutting. What is the benefit of the 0.8 mm corner radius? A 0.8 mm corner radius offers a compromise between edge strength and profile fidelity, giving the insert robustness for interrupted cuts while maintaining good form accuracy. Is this insert compatible with standard TCMT toolholders? The TCMT designation indicates compatibility with standard TCMT toolholder pockets; ensure correct clamping torque and seat condition for optimal performance. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned here exclusively for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is original, factory‑new merchandise of the manufacturer Walter Tools.
TCMT16T308-FM4 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WSM10S grade for stable cutting edges and reliable performance when machining stainless steel and superalloys; the 60° triangular form with FM4 chipbreaker and a 0.8 mm corner radius supports consistent chip control and longer tool life. Order the TCMT16T308-FM4 WSM10S insert directly via Metav Werkzeuge or consult our specialists for application advice. TCMT16T308-FM4 WSM10S indexable insert for drilling, boring and turning — Walter Tools (Tiger‑tec Silver, 7° clearance) The TCMT16T308-FM4 WSM10S is a triangular 60° indexable cutting insert designed for heavy-duty machining of stainless steel and heat‑resistant superalloys; it combines a coated carbide grade from the Tiger‑tec Silver series with a dedicated FM4 chipbreaker to promote secure chip formation and process stability. Tiger‑tec Silver coated grade WSM10S For stainless steel and superalloys (M, S) 60° triangular insert, 16 mm size FM4 chipbreaker with 0.8 mm corner radius Reliable edge stability for tough materials The coated carbide WSM10S grade from the Tiger‑tec Silver series is formulated to maintain a stable cutting edge under thermal and mechanical load when machining tough alloys. Because the grade emphasises heat resistance and wear control, it reduces the risk of built‑up edge and premature flank wear, which leads to more predictable tool life and fewer interruptions in the production flow. The insert’s substrate and coating combination therefore supports higher average cutting speeds and longer intervals between indexings. Controlled chip formation for improved surface finish With the FM4 chipbreaker geometry and a 0.8 mm corner radius, the insert delivers consistent chip control even in difficult-to-cut stainless steel and superalloys. Controlled chip flow lowers the chance of chip entanglement and diminishes workpiece surface damage, which results in improved surface integrity and less downstream finishing. This geometry is particularly advantageous when tight surface quality and repeatability are required across serial production. Optimised geometry for secure clamping and versatility The triangular 60° form and 16 mm size provide three cutting edges per index and a compact seat that is compatible with a wide range of toolholders for drilling, boring and turning applications. The 7° clearance angle balances cutting action and edge support, reducing radial forces and improving stability in interrupted cuts. These geometric choices translate into a practical combination of productivity and mechanical security for mixed‑batch machining environments. Process benefits and integration into production Using this insert contributes to predictable cycle times and easier process planning by combining a robust grade with an effective chipbreaker design. The insert is intended for applications classified under ISO groups M (stainless steels) and S (heat‑resistant superalloys and titanium), which helps with tool selection for specific workpiece materials. For implementation, recommend pairing the insert with appropriate Walter toolholders and machining parameters tuned to the material group to achieve the best cost‑per‑part outcome. For application advice or to secure the Walter Tools TCMT16T308-FM4 WSM10S insert with Tiger‑tec Silver, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TCMT16T308-FM4-WSM10S-WALTER Designation: TCMT16T308-FM4 WSM10S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM10S Product type: Indexable insert for drilling/boring and turning Facts Shape: Triangular 60° Size: 16 mm Clearance angle: 7° Corner radius: 0.8 mm Thickness: T3 Tolerance class: M Special features Coated carbide grade WSM10S FM4 chipbreaker Suitable for stainless steel (ISO M) Suitable for heat‑resistant superalloys / titanium (ISO S) Three usable cutting edges per insert FAQ What materials is this insert intended for? The TCMT16T308-FM4 WSM10S insert (Walter Tools) is specified for stainless steel and heat‑resistant superalloys (ISO groups M and S), making it suitable for demanding stainless and high‑temperature alloy applications. How does the FM4 chipbreaker benefit machining? The FM4 chipbreaker on the TCMT16T308-FM4 WSM10S promotes controlled chip formation, which improves surface finish and reduces chip management issues during continuous or interrupted cutting. What is the significance of the Tiger‑tec Silver series? Tiger‑tec Silver denotes a coated carbide technology that enhances thermal and abrasive resistance; in this insert, the combination of coating and substrate increases process stability and tool life for challenging materials. How many cutting edges are available per insert and what is the form? The triangular 60° form provides three indexable cutting edges per insert, with a 0.8 mm corner radius to balance edge strength and surface quality for Walter Tools’ TCMT16T308-FM4 WSM10S. Is this insert suitable for mixed production and tool standardisation? Yes, the insert’s geometry and grade support a predictable performance profile that helps standardise tooling across batches, particularly where stainless steel and superalloys are frequently machined. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory‑new goods of the manufacturer.
TCMT16T308-FM4 WSM20S WSM20S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating and the FM4 chipbreaker for stable chip control and extended tool life in stainless steels and superalloys; order through Metav Werkzeuge or consult our technical advisers for tailored application guidance. TCMT16T308-FM4 WSM20S – Triangular turning insert, Tiger·tec Silver (Walter Tools) The TCMT16T308-FM4 WSM20S is a triangular indexable turning insert designed for precision turning and boring in stainless steels and heat‑resistant alloys. Tiger·tec Silver coating for heat and wear resistance FM4 chipbreaker for stable chip control 60° triangular geometry with 0.8 mm nose radius Optimised for stainless steels and superalloys Reliable cutting performance for tough alloys The combination of a coated carbide substrate and the Tiger·tec Silver technology delivers improved wear resistance and thermal stability when machining difficult materials. The WSM20S grade is formulated to maintain a stable cutting edge under high temperatures, which reduces the risk of built‑up edge and supports consistent cycle times. This results in measurable process stability and contributes to longer effective tool life in production environments. Geometry engineered for repeatable surface quality A 60° triangular form with a 0.8 mm nose radius and 7° clearance provides a robust cutting edge that balances strength and finish capabilities. The insert’s tolerance class M and T3 thickness ensure repeatable seating and minimal runout in standard holders, supporting accurate dimensions and surface integrity. These geometric choices make the insert suitable for both medium‑ and finishing cuts where a predictable profile and repeated part quality are essential. Practical application guidance and process advantages With a dedicated FM4 chipbreaker, the insert promotes controlled chip formation and evacuation in both stainless steels and superalloys, reducing interruptions and improving cycle productivity. Use the triangular indexable insert in stable toolholders and prioritise rigid setups to exploit the grade’s thermal resistance and edge stability. The result is fewer tool changes and steady component throughput in continuous production or batch machining of demanding materials. For demanding turning tasks in stainless steels and superalloys, request the Walter Tools TCMT16T308-FM4 WSM20S from Metav Werkzeuge or contact our specialists at Metav Werkzeuge for application‑specific recommendations and support. Technical data Article number: TCMT16T308-FM4-WSM20S-WALTER Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Designation: TCMT16T308-FM4 WSM20S Core data Insert size: 16 mm Nose radius: 0.8 mm Clearance angle: 7° Thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Silver Chipbreaker: FM4 Material base: Coated carbide Geometry: Triangle 60° Material suitability: Stainless steels (M), Superalloys/Titanium (S) Application focus: Turning and boring operations FAQ What materials is this insert best suited for? The TCMT16T308-FM4 WSM20S is optimised for stainless steels and heat‑resistant superalloys (ISO groups M and S), offering enhanced edge stability when machining these demanding materials. How does the FM4 chipbreaker improve performance? The FM4 chipbreaker on this insert promotes reliable chip control and evacuation, which reduces interruptions from entangled chips and supports steady cutting forces and improved surface quality. What are the key geometry specifications of the insert? The insert features a 60° triangular form with a 0.8 mm nose radius, 7° clearance angle and T3 thickness, manufactured to tolerance class M for consistent seating and repeatable results. Can this insert be used for finishing as well as roughing? Yes, the grade and geometry combination supports both medium‑cut and finishing operations in stainless steels and superalloys, provided a rigid toolset and appropriate cutting parameters are applied. Is the insert coated and what benefit does the coating provide? The TCMT16T308-FM4 WSM20S carries the Tiger·tec Silver coating on a coated carbide substrate, which increases thermal resistance and wear protection, extending tool life in high‑temperature applications. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, brand‑new goods from the manufacturer.
TCMT16T308-FM4 WSM30S T Wendeplatten - Walter Tools
Take advantage of a coated carbide grade and an FM4 chipbreaker to achieve stable chip control and longer tool life when machining stainless steels and heat‑resistant alloys; the result is fewer interruptions and consistent surface quality. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. TCMT16T308-FM4 WSM30S – Triangle indexable insert for drilling, boring and turning by Walter Tools TCMT16T308-FM4 WSM30S is a triangle 60° indexable insert designed for machining rostfreier Stahl (stainless steels) and heat‑resistant superalloys in demanding industrial applications. Tiger‑tec Silver coating for extended life FM4 chipbreaker for secure chip control 0.8 mm corner radius for profile versatility 7° relief angle for stable cutting High process reliability for stainless steels and superalloys The coated carbide grade from the Tiger‑tec Silver family combines thermal stability with wear resistance to support continuous operation in challenging materials. The design addresses the typical issues of machining stainless steel and heat‑resistant alloys — built‑up edge formation and high cutting temperatures — by promoting consistent chip formation and reducing the risk of edge deterioration. This results in fewer interruptions and more predictable production cycles. Consistent chip control and improved surface finish The integrated FM4 chipbreaker is tuned to evacuate chips reliably under variable cutting conditions, lowering the likelihood of chip jamming and surface damage. In practical terms, stable chip control reduces rework and tool changes, which contributes to higher throughput and better part quality. For shops requiring reproducible finishes, the combination of geometry and chip control supports a dependable and measurable improvement in output. Geometry that balances strength and adaptability A 0.8 mm corner radius and a 7° relief angle give the insert a good compromise between edge strength and cutting sensitivity. The triangular 60° shape allows three usable cutting corners per index, improving cost efficiency on batch runs. The insert thickness designation T3 supports secure clamping in typical toolholders used for drilling, boring and turning operations, enabling flexible deployment across common setups. Coating and material pairing for lasting performance The WSM30S grade is a coated carbide specifically developed for materials that are hard to machine. The Tiger‑tec Silver coating enhances resistance to adhesion and thermal wear, while the substrate maintains the mechanical support required for interrupted cuts. This technical pairing extends tool life and keeps cutting forces within predictable limits, helping shops to plan maintenance and tooling consumption more accurately. Practical application notes and benefits Suitable for workpieces classified under ISO group M (rostfreier Stahl) and S (superalloys, titanium), the insert performs best with cutting data adjusted to the material and the machining operation. Using the right coolant strategy and optimised feeds will make the most of the Tiger‑tec Silver technology and the FM4 chip geometry, reducing the incidence of build‑up and promoting repeatable results across production batches. For application advice or to specify the TCMT16T308‑FM4 WSM30S for a particular process, contact Metav Werkzeuge for tailored recommendations and availability. Technical data Article number / SKU: TCMT16T308-FM4-WSM30S-WALTER Product designation: TCMT16T308-FM4 WSM30S Product type: Indexable insert for drilling/boring and turning Series: Tiger‑tec Silver Manufacturer: Walter Tools Core technical data Relief angle: 7° Corner radius: 0.8 mm Insert shape: Triangle 60° Inscribed circle / size: 16 mm Thickness: T3 Grade / sort: WSM30S Tolerance class: M Special features Coating technology: Tiger‑tec Silver Chipbreaker: FM4 Substrate: Coated carbide Application groups: rostfreier Stahl (stainless steels), heat‑resistant superalloys and titanium Designed for productive machining and stable chip formation FAQ What materials is this insert suitable for? The TCMT16T308‑FM4 WSM30S is designed for rostfreier Stahl (stainless steels) and heat‑resistant superalloys (ISO groups M and S), offering secure chip control and thermal resistance for these materials. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker on this Walter Tools insert promotes reliable chip evacuation and reduces build‑up, which helps to maintain surface quality and extend cutting edge life during continuous operation. How many cutting edges are available per insert? The triangular 60° geometry provides three usable cutting corners per indexable insert, enabling efficient corner changes and economical use of the insert. Is the Tiger‑tec Silver coating beneficial for interrupted cuts? Yes; the Tiger‑tec Silver coating improves adhesion resistance and thermal stability, which contributes to a more durable edge under interrupted cutting and elevated temperatures. Which insert size and clamping should be used? The insert has an inscribed circle of 16 mm and a thickness designation T3; use a matching toolholder designed for TCMT‑type triangular inserts to ensure secure clamping and correct seating. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) is one of the world's leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the listed brands. The offered item is original, factory‑new goods from the manufacturer.
TCMT16T308-FM6 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a robust WSM20S grade and precise geometry for stable machining of rostfreier Stahl and heat‑resistant alloys — order directly via Metav Werkzeuge or contact our advisors for application support. TCMT16T308-FM6 WSM20S — Turning insert for rostfreier Stahl and superalloys | Walter Tools The TCMT16T308-FM6 WSM20S is a triangular, coated carbide turning insert developed for demanding turning applications on rostfreier Stahl and heat‑resistant superalloys. Tiger·tec Silver coating for high process security Grade WSM20S for rostfreier Stahl and superalloys Triangle 60° with 0.8 mm corner radius 7° relief angle for reliable chip control Optimised for tough materials and thermal loads The Tiger·tec Silver coating in conjunction with the WSM20S grade provides thermal stability and improved resistance to built‑up edge when machining rostfreier Stahl and nickel‑based alloys. This combination reduces flank wear and supports a stable cutting edge, which in practice means longer tool life and fewer insert changes per shift. The insert’s coated carbide substrate is engineered to dissipate heat more effectively than conventional uncoated grades, helping to maintain dimensional accuracy over extended runs and reducing unscheduled stoppages in production. Consistent chip formation and surface quality With the FM6 chipbreaker and a 0.8 mm corner radius on a triangle 60° platform, this insert is designed for controlled chip segmentation and predictable flow. The 7° relief angle contributes to low friction at the cutting zone and minimises the risk of edge build‑up, resulting in a superior surface finish and reduced rework. For operations where consistent cycle times matter, such as batch turning of shafts or components in rostfreier Stahl, the predictable chip behaviour helps maintain productivity and reduces machine downtime caused by poor chip evacuation. Process reliability and economic machining The TCMT format with T3 thickness and tolerance class M offers mechanical stability for moderate to heavy cuts while remaining compatible with standard toolholder systems. The grade’s focus on heat resistance and edge stability allows higher cutting parameters on difficult alloys, so the investment repays through fewer tool changes and improved throughput. In addition, the standardised triangular geometry simplifies inventory management and interchangeability across turning centres, supporting a lean toolroom strategy and consistent part quality across multiple machines. Contact Metav Werkzeuge today for detailed application recommendations on Walter Tools turning inserts such as the TCMT16T308-FM6 WSM20S, or call +49 2822 7131930 / email info@metav-werkzeuge.com Technical data Article number: TCMT16T308-FM6-WSM20S-WALTER Product type: turning insert (Drehwendeschneidplatte) Designation: TCMT16T308-FM6 WSM20S Facts Insert size: 16 mm Corner radius: 0.8 mm Relief angle: 7° Insert shape: Triangle 60° Thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WSM20S Chipbreaker: FM6 Series: Tiger‑tec Silver Material suitability: S / M (superalloys and rostfreier Stahl) Execution: T FAQ What materials is this insert suitable for? The TCMT16T308-FM6 WSM20S insert from Walter Tools is formulated for rostfreier Stahl and heat‑resistant superalloys (S / M), providing thermal stability and reliable chip control. Which chipbreaker and geometry are used for chip control? This insert features the FM6 chipbreaker on a triangular 60° platform with a 0.8 mm corner radius to promote consistent chip formation and good surface finish. Is the insert compatible with standard toolholders? Yes, the TCMT format and T3 thickness conform to common turning‑insert standards and are compatible with standard clamping systems for indexable turning. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating enhances heat resistance and edge stability on high‑temperature materials, helping to extend tool life and maintain dimensional accuracy during longer cutting cycles. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is a leading manufacturer of precision cutting tools and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners and are mentioned solely for explanation. There is no affiliation between our company and the named brands; the offered item is original, factory‑new merchandise of the manufacturer.
TCMT16T308-FP4 WEP10C WEP10C Wendeplatten - Walter Tools
Reliable finishing performance through the combination of a WEP10C cermet grade and an FP4 chipbreaker, delivering consistent surface quality and controlled chips; the 60° triangular geometry with a 0.8 mm corner radius and 7° clearance ensures repeatable seating and good edge stability. Order the insert directly via Metav Werkzeuge or consult our specialists for application matching. TCMT16T308-FP4 WEP10C — Walter Tools triangular 60° turning and drilling indexable insert, cermet grade The TCMT16T308-FP4 WEP10C is a triangular indexable insert designed for finishing in turning and boring operations, providing fine-edge behaviour and dependable chip control. Cermet grade WEP10C for finishing Triangular 60° insert form 0.8 mm corner radius for fine edges FP4 chipbreaker for stable chips Consistent finishing thanks to cermet technology The combination of WEP10C and the Walter Cermet series aims to deliver a high-quality surface finish with extended edge life. Cermet is a ceramic-based cutting material with a metallic binder that offers high hardness and excellent wear resistance at cutting temperatures typical for finishing operations. This results in lower flank wear and improved part quality in light to medium finishing passes. For machinists seeking predictable results, the cermet grade is a rational choice where surface integrity matters. Stable chips and fewer interruptions on the shop floor The FP4 chipbreaker is engineered to promote short, controlled chip formation during finishing cycles. Effective chip control reduces the risk of entanglement, tool damage and unplanned stoppages, contributing to higher process efficiency. Together with the 7° clearance angle, the geometry reduces cutting forces and helps maintain a steady cut, which supports continuous production and fewer machine interventions. Rigidity and repeatability from proven geometry The 60° triangular shape provides three indexed cutting edges per insert, enabling quick rotation to a fresh edge and minimising downtime. The 0.8 mm corner radius balances strength and the ability to generate fine features, while the T3 thickness ensures solid support in the toolholder for repeatable seating and dimensional stability. These design choices favour repeatability and consistent tolerances in precision turning and boring tasks. Guidance on grade selection and material compatibility The insert is supplied in the WEP10C cermet grade; suitability for specific workpiece materials should be verified against the manufacturer’s matrix — material data is catalogue-dependent. The product carries a M tolerance class and is supplied under the Walter Cermet series designation. For shops or production planners uncertain about the optimal grade for a given alloy or surface finish requirement, technical consultation is recommended to align grade, geometry and cutting data for best results. For precision finishing and reliable chip control with Walter Tools cermet grades, contact Metav Werkzeuge for application advice and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TCMT16T308-FP4-WEP10C-WALTER Product type: drill/ream indexable insert / turning indexable insert ISO designation: TCMT16T308-FP4 WEP10C Series: Walter Cermet Grade: WEP10C Manufacturer: Walter Tools Core specifications Corner radius: 0.8 mm Clearance angle: 7° Insert form: triangular 60° Insert size: 16 Thickness: T3 Tolerance class: M Features & versions Chipbreaker: FP4 Execution: T Label: TCMT16T308-FP4 Material: catalogue-dependent Sort/grade description: cermet cutting material FAQ What machining operations suit this insert best? The TCMT16T308-FP4 WEP10C is intended for finishing in turning and light boring; its WEP10C cermet composition and FP4 chipbreaker favour fine surface quality and stable chips. How many cutting edges are available per insert? The triangular 60° geometry provides three indexed cutting edges, enabling quick rotation to a fresh edge when required. Is the WEP10C grade suitable for stainless or hardened steels? Material compatibility depends on the specific product matrix; the WEP10C cermet grade often excels in finishing, but suitability for stainless or hardened steels should be checked against the Walter Cermet data sheet. What advantages does the FP4 chipbreaker offer? The FP4 chipbreaker promotes short, controlled chips and stable evacuations during finishing passes, reducing the chance of chip-related interruptions in production. How does the 0.8 mm corner radius affect part quality? A 0.8 mm corner radius combines edge strength with the ability to produce fine, controlled radii on workpieces, helping to maintain dimensional stability and surface integrity. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are cited for clarification only and do not imply any affiliation between our company and the named manufacturers. The offered item is original, factory-new goods from the manufacturer.
TCMT16T308-FP4 WPP10G WPP10G Wendeplatten - Walter Tools
TCMT16T308-FP4 — TCMT16T308-FP4 WPP10G — WPP10G Drehwendeschneidplatte für Stahl von Walter Tools Die TCMT16T308-FP4 WPP10G ist eine robuste Wendeschneidplatte für präzise Stahlzerspanung im Drehsupport und beim Aufbohren. Tiger·tec Gold Beschichtung für längere Standzeit FP4 Spanbrecher für kontrollierte Spanbildung Dreieck 60° mit drei Schneidkanten für Wirtschaftlichkeit Freiwinkel 7° für gute Spanabfuhr und Oberflächengüte Plattendicke T3 und Eckenradius 0,8 mm für stabile Schnitte Höhere Produktivität durch moderne Beschichtung Die Kombination aus Tiger·tec Gold Beschichtung und der WPP10G Schneidstoffklasse sorgt für verlängerte Standzeit und konstante Werkzeugleistung bei der Bearbeitung von Stahl. Diese Beschichtung reduziert Verschleiß bei typischer Wärmeentwicklung und ermöglicht damit längere Einsatzzyklen in der Serienfertigung. Für Anwender bedeutet das weniger Werkzeugeinsätze pro Bauteil und niedrigere Stückkosten. Präzise Geometrie für saubere Spanbildung Mit dem FP4 Spanbrecher, dem Eckenradius 0,8 mm und dem Freiwinkel 7° liefert die Platte eine stabile Spanbildung und gleichbleibende Oberflächen. Die Dreieck 60° Form bietet drei nutzbare Schneidkanten pro Plattenlage, was die Wirtschaftlichkeit erhöht. Diese Geometrie reduziert Nacharbeit und verbessert die Maßhaltigkeit von Dreh- und Aufbohrprozessen. Effizienz in der Serienfertigung und Prozesssicherheit Die Wendeschneidplatte richtet sich an Produktionsbetriebe und Lohnfertiger, die hohe Stückzahlen mit reproduzierbarer Qualität benötigen. WPP10G bietet eine ausgewogene Mischung aus Verschleißfestigkeit und Zähigkeit, speziell optimiert für ISO P Werkstoffe. Das Ergebnis ist eine zuverlässige, produktive Zerspanung mit guter Span Kontrolle und stabiler Schneidkante. Einfache Einbindung und technische Hinweise Die Platte ist ausgelegt als Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte und passt in entsprechende Plattenhalter für Dreieckige Einsätze. Der Eckenradius beeinflusst Schnittkraft und Oberflächenbild — kleiner Radius für feine Schnitte, größerer Radius für höhere Stabilität. Der Spanbrecher FP4 erleichtert das Einfangen und Ablenken der Späne, was die Maschinenlaufzeiten erhöht. Mit der Tiger·tec Gold WPP10G Wendeschneidplatte von Walter Tools die Produktivität steigern — Bestellanfrage und Beratung über Metav Werkzeuge, eMail info@metav-werkzeuge.com, Tel. +49 2822 7131930 Produktmerkmale Artikelnummer: TCMT16T308-FP4-WPP10G-WALTER Marke: Walter Tools Baureihe: Tiger-tec Gold Ausführung: T Plattenform: Dreieck 60° Spanbrecher: FP4 Fakten Freiwinkel: 7° Eckenradius: 0,8 mm Plattengröße: 16 Plattendicke: T3 Toleranzklasse: M Besonderheiten Beschichtung: Tiger·tec Gold (beschichtetes Hartmetall) Material: beschichtetes Hartmetall Bearbeitbar: Stahl (ISO P) Produktart: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Sorteneigenschaften: WPP10G — 10 verschleißfest, 20 universell, 30/35 zäh FAQ Für welche Werkstoffe ist die Platte geeignet? Die TCMT16T308-FP4 WPP10G von Walter Tools ist primär für Stahl ausgelegt und deckt die ISO P Werkstoffgruppe ab, speziell unlegierte und legierte Stähle. Welche Vorteile bietet die Tiger·tec Gold Beschichtung? Die Tiger·tec Gold Beschichtung erhöht die Verschleißfestigkeit und verbessert die Standzeit, sodass die Walter Tools WPP10G Sorte längere Einsatzintervalle bei stabiler Schneidkante ermöglicht. Wie wirkt sich der Eckenradius auf das Bearbeitungsergebnis aus? Ein Eckenradius von 0,8 mm bietet einen Kompromiss aus Maßstabilität und Schnittkraft, führt zu guter Oberflächenqualität und reduziert Schneidkantenausbrüche bei Stahlbearbeitung. Wie viele Schneidkanten sind nutzbar? Die dreieckige Form (60°) ermöglicht drei Schneidkanten pro Wendeschneidplatte, was die Wirtschaftlichkeit gegenüber einseitigen Platten erhöht. Welchen Nutzen hat der FP4 Spanbrecher? Der FP4 Spanbrecher verbessert die Spanformung und erleichtert die Spanabfuhr, was die Prozesssicherheit steigert und Maschinenlaufzeiten reduziert. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT16T308-FP4 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from a combination of consistent cutting performance, wide suitability for steel applications and long tool life thanks to Tiger·tec Gold technology — order directly via Metav Werkzeuge or ask our consultants for application advice. TCMT16T308-FP4 WPP20G indexable insert for drilling/boring and turning, Tiger·tec Gold – Walter Tools A TCMT16T308-FP4 WPP20G is an indexable insert engineered for robust steel machining in turning, drilling and boring operations. Tiger·tec Gold coating for enhanced tool life Optimised chipformer FP4 for stable chip control 7° clearance angle for reliable cutting action Triangle 60° form with 0.8 mm nose radius Consistent cutting performance for steel workpieces The design focuses on delivering predictable productivity when machining steel (ISO P). The combination of a coated carbide substrate and the WPP20G grade provides a balance between wear resistance and toughness, reducing the frequency of insert changes. The indexable insert geometry and the specified 7° clearance minimise rubbing and ensure the cutting edge engages cleanly, which results in steady metal removal rates and improved process reliability. Predictable chip control and surface quality The FP4 chipformer is engineered to produce controllable chip shapes across typical steel cutting conditions. Controlled chip formation reduces the risk of workpiece damage and tool interference, supporting consistent surface finish. With a triangle 60° form and 0.8 mm nose radius, the insert gives a compromise between edge strength and the ability to achieve acceptable surface roughness for routine turning and boring tasks. Coating technology and grade advantages for productivity Belonging to the Tiger·tec Gold family, the WPP20G grade incorporates modern coating layers optimised for higher process security and longer life in interrupted and continuous cuts. The coating improves heat resistance at the cutting edge, aiding dimensional stability and reducing flank wear. For production runs where uptime and repeatability matter, this translates into fewer tool interventions and more predictable cycle times. Practical application guidance and support The insert is supplied in the TCMT geometry for compatibility with a wide range of toolholders and tool systems, and the T3 thickness offers a stable seating for demanding operations. For selection, the insert is primarily intended for steel (P) machining; adjustments to feeds and speeds are recommended based on part rigidity and machine power. If further specification data or machining suggestions are required, the Metav Werkzeuge team can provide tailored recommendations and cutting-parameter guidance. Contact Metav Werkzeuge for matched tooling advice on Walter Tools Tiger·tec Gold inserts — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to discuss the best insert selection for steel machining. Technical Data Article number: TCMT16T308-FP4-WPP20G-WALTER Part designation: TCMT16T308-FP4 WPP20G Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.8 mm Plate form: Triangle 60° Plate size: 16 mm Plate thickness: T3 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: FP4 Substrate/coating: coated carbide Application group: steel (ISO P) Execution: T FAQ What materials is this insert best suited for? The insert is formulated for machining steel (ISO P); the WPP20G grade is optimised for typical heat and chip formation encountered in steel. How does the FP4 chipbreaker influence machining? The FP4 chipformer improves chip control and evacuation, promoting consistent surface finish and reducing the risk of chip-related interruptions when machining steel. Which geometry and nose radius does the insert feature? The insert has a triangle 60° form with a 0.8 mm nose radius, offering a balance of edge strength and finish capability for turning and boring. Is the insert compatible with standard TCMT toolholders? Yes, the insert follows the TCMT geometry and is compatible with holders designed for TCMT cartridges and clamping systems. Can this grade handle interrupted cuts? The coated Tiger·tec Gold family provides enhanced toughness and wear resistance, making the grade suitable for many interrupted cutting scenarios common in steel machining. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Walter Tools is part of a globally recognised group of precision tooling. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are cited solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, factory-new goods of the manufacturer.
TCMT16T308-FP6 WPP20G Wendeplatten - Walter Tools
Take advantage of reliable chip control and a high-performance Tiger·tec Gold grade for consistent steel machining and long tool life; the combination of stable geometry and a wear-resistant coating keeps production steady. Order the insert directly via Metav Werkzeuge or consult our experts for application-specific advice. TCMT16T308-FP6 WPP20G – triangle 60° indexable turning insert, FP6 chipbreaker, Walter Tools The TCMT16T308-FP6 WPP20G is a coated carbide turning insert developed for machining steel (ISO P), offering a balance of wear resistance and toughness for predictable, productive turning operations. Tiger·tec Gold coated carbide WPP20G Designed for steel machining (ISO P) FP6 chipbreaker for controlled chips Triangle 60° with 0.8 mm corner radius Consistent performance in steel turning The Tiger·tec Gold grade WPP20G combines a coated carbide substrate with a P-class formulation that is specifically tuned for the heat and chip behaviour encountered when machining steel. This results in a stable cutting edge and reduced wear rates, which supports longer cutting intervals and fewer tool changes. For production environments where repeatability matters, the insert’s engineered balance of hardness and toughness reduces process variation and contributes to consistent surface quality and component tolerances. Geometry and chip control that stabilise the process The triangular 60° form provides multiple usable edges per insert, while the FP6 chipbreaker helps to break and evacuate chips reliably when cutting steel. A 0.8 mm corner radius and 7° clearance angle give a compromise between edge strength and a fine surface finish, making the geometry suitable for finishing and light semi-finishing passes. The T3 thickness further enhances rigidity in the toolholder, lowering vibration and improving dimensional stability during interrupted cuts. Practical advantages for workshop and production use With a medium tolerance class M and a designation tailored to ISO P materials, this insert integrates smoothly into existing turning processes for steels of varying strength and alloy content. The clear specification of series and grade simplifies tool selection and inventory management: the Tiger·tec Gold series is designed for economical machining with reliable chip formation. For batch production or high-mix turning tasks, the insert’s consistent wear behaviour supports predictable tool-life planning and reduces unplanned downtime. For machining steel with Walter Tools’ Tiger·tec Gold grade, contact Metav Werkzeuge for application advice or to arrange supply: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: TCMT16T308-FP6-WPP20G-WALTER Designation: TCMT16T308-FP6 WPP20G Manufacturer: Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Core technical data Size: 16 mm Corner radius: 0.8 mm Clearance angle: 7° Insert shape: Triangle 60° Thickness: T3 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: FP6 Material suitability: Steel (ISO P) Execution: T Base designation: TCMT16T308-FP6 FAQ What materials is this insert suitable for? The insert is formulated for machining steel (ISO P); the WPP20G grade and Tiger·tec Gold coating are optimised for typical steel cutting temperatures and chip formation. How does the FP6 chipbreaker affect performance? The FP6 chipbreaker promotes controlled chip formation and evacuation when turning steel, helping to maintain stable cutting conditions and consistent surface finish. How many cutting edges are available per insert? The triangular 60° geometry provides multiple usable edges, allowing economical index changes and efficient use of the insert’s cutting life. Is the insert suitable for finishing operations? Yes. The 0.8 mm corner radius and 7° clearance angle support good surface quality in finishing and light semi-finishing passes on steel. What series and coating technology does the insert use? This insert belongs to the Tiger·tec Gold series and uses a coated carbide grade WPP20G, designed for a balance of wear resistance and toughness. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; Walter Tools as a brand belongs to Walter AG and forms part of the Sandvik group. Trademarked names and designations are the property of their respective owners. Brand names are mentioned for explanation only; there is no affiliation between our company and the manufacturers. The offered article is original, brand-new goods of the manufacturer.
TCMT16T308-FW4 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold wear resistance and the FW4 chipbreaker for consistently productive steel turning. Take advantage of precise geometry and reliable grade performance—order via Metav Werkzeuge or consult their advisors for application-specific guidance. TCMT16T308-FW4 WPP10G indexable turning insert by Walter Tools — Tiger‑tec Gold, FW4 chipbreaker The TCMT16T308-FW4 WPP10G is a triangle 60° indexable turning insert engineered for steel machining; its coated carbide grade and robust geometry suit medium to heavy cutting conditions. Tiger‑tec Gold coating for long tool life WPP10G grade optimised for steel machining FW4 chipbreaker for reliable chip control Triangle 60° insert with 0.8 mm corner radius Proven coating and grade for extended tool life The combination of the Tiger‑tec Gold coating and the WPP10G carbide grade delivers a wear‑resistant cutting edge designed specifically for machining steel (ISO P). The coating reduces abrasive wear and improves thermal stability, which means more consistent tool life under cyclic heat loads. For production environments seeking fewer insert changes and predictable performance, this coating‑grade pairing reduces downtime and contributes to stable process economics. Controlled chips and consistent surface finish Geometry and chip management are decisive for reliable turning. The integrated FW4 chipbreaker is tailored to produce stable, segmented chips in common steel grades, while the triangle 60° form and 0.8 mm corner radius help maintain edge strength and part integrity. The 7° clearance angle supports secure cutting without rubbing, promoting consistent surface quality and dimensional repeatability. These features translate into fewer interruptions and a smoother workflow on batch and continuous runs. Practical integration and production advantages As an indexable insert, this format enables quick tool changes and inventory efficiency for workshop and shop‑floor operations. The insert’s size and designation suit common tool holders, simplifying replacement and minimising setup time. With a tolerance class of M and a robust execution, the component supports stable chip formation and repeatable results, improving overall productivity. The Walter Tools pedigree and Tiger‑tec Gold technology offer a balance of wear resistance and toughness, making the insert a practical choice for mixed steel workloads. For reliable, high‑performance steel turning choose the Tiger‑tec Gold TCMT16T308-FW4 WPP10G from Walter Tools — contact Metav Werkzeuge for technical advice or to secure supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TCMT16T308-FW4-WPP10G-WALTER Label: Drehwendeschneidplatte TCMT16T308-FW4 WPP10G Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Designation: TCMT16T308-FW4 WPP10G Series: Tiger‑tec Gold Grade: WPP10G Core specifications Size: 16 mm Thickness: T3 Clearance angle: 7° Corner radius: 0.8 mm Geometry: Triangle 60° Tolerance class: M Execution: T Features & applications Coating technology: Tiger‑tec Gold (coated carbide) Chipbreaker: FW4 Material suitability: Steel (ISO P) Grade characteristics: wear resistant and versatile for steel machining FAQ What materials is this insert intended for? The TCMT16T308-FW4 WPP10G is specified for steel machining (ISO P); the WPP10G grade and Tiger‑tec Gold coating are optimised for typical steel heat and chip formation. Does the insert provide effective chip control? Yes, the FW4 chipbreaker on this triangle insert is designed for predictable chip formation and evacuation when turning steel, supporting consistent surface finish. What are the key dimensional specifications? The insert is a 16 mm triangle form with T3 thickness, a 7° clearance angle and a 0.8 mm corner radius, matching common TCMT tool holders. Is the cutting material coated? The insert uses a coated carbide grade from the Tiger‑tec Gold series (WPP10G), combining wear resistance and thermal stability for prolonged edge life. What tolerance and execution are specified? This insert is supplied in tolerance class M with execution T, offering suitable precision for standard turning applications. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation or partnership between our company and the named brands. The item offered is an original, brand‑new product from the manufacturer.
TCMT16T308-FW4 WPP20G WPP20G Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Gold coating and the WPP20G grade delivers extended tool life and stable chip formation in steel turning; the triangle 60° geometry with a 0.8 mm corner radius adds edge robustness and versatility in a wide range of turning tasks. Available to order through Metav Werkzeuge or via consultation with their technical advisors. TCMT16T308-FW4 WPP20G – Turning indexable insert, triangle 60°, for steel | Walter Tools TCMT16T308-FW4 WPP20G is a triangular 60° indexable insert designed for steel turning, combining Tiger·tec Gold-coated carbide and an FW4 chipbreaker for consistent chip control and reduced machining interruptions. Tiger·tec Gold coated for high wear resistance Grade WPP20G optimised for steel machining Triangle 60° geometry for versatile cutting 0.8 mm corner radius for robust edge strength Proven productivity for steel turning The combination of Tiger·tec Gold coating and the WPP20G carbide grade provides a balance between wear resistance and toughness specifically for steel (ISO P) applications. This results in longer tool life and fewer tool changes, which increases machine uptime and lowers process costs. The coated carbide substrate is formulated to withstand the thermal and mechanical stresses typical of steel machining, so cycle times can be maintained without compromising surface integrity. Such measurable reliability supports higher throughput in production environments that demand consistent component quality. Secure edge performance and effective chip control The triangle 60° geometry paired with the FW4 chipbreaker and a 0.8 mm corner radius delivers a robust cutting edge that resists chipping during interrupted cuts and parting operations. The 7° relief promotes stable cutting conditions by reducing rubbing at the flank, improving surface finish and lowering cutting forces. These design choices directly translate into fewer rejects and predictable tool life, which simplifies process planning and reduces the need for frequent tool requalification. The insert’s construction also aids in controlled chip formation, easing chip evacuation and minimising the risk of built-up edge. Practical handling, tolerant clamping and broad applicability With T3 thickness and tolerance class M, the insert offers secure clamping and interchangeability across standard toolholders, which streamlines inventory management. The FW4 chipbreaker is suited to a variety of feed and depth-of-cut combinations, providing flexibility for roughing and finishing passes without changing cutting geometry. The insert is particularly suitable for general steel turning where a balance of productivity and surface quality is required. Clear identification via the ISO designation ensures straightforward substitution and process documentation for CNC programmes and tool lists. Contact Metav Werkzeuge for tailored application advice on Walter Tools turning inserts and to confirm the optimal WPP20G configuration for specific steel machining tasks Technical data SKU: TCMT16T308-FW4-WPP20G-WALTER Article designation: TCMT16T308-FW4 ISO designation: TCMT16T308-FW4 WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Insert size: 16 mm Corner radius: 0.8 mm Relief angle: 7° Plate form: Triangle 60° Thickness: T3 Tolerance class: M Chipbreaker: FW4 Execution: T Materials & special features Grade: WPP20G (Tiger·tec Gold coated carbide) Application: Steel (ISO P) Balance of wear resistance and toughness for general steel turning FAQ What materials is this insert suitable for? The TCMT16T308-FW4 WPP20G from Walter Tools is designed for steel machining (ISO P), offering a good balance of wear resistance and toughness for general turning tasks. How does the FW4 chipbreaker affect machining? The FW4 chipbreaker on the insert promotes predictable chip formation and evacuation, improving surface finish and reducing the risk of built-up edge during steel turning. Can this insert be used for finishing and roughing? Yes, the combination of the 0.8 mm corner radius and the FW4 chipbreaker provides versatility for both finishing and moderate roughing operations in steel. Is the insert compatible with standard toolholders? With a T3 thickness and tolerance class M, the insert is compatible with common clamping systems and can be substituted in standard indexable toolholders for turning operations. How is the TCMT16T308-FW4 WPP20G identified in documentation? The ISO designation TCMT16T308-FW4 WPP20G and the SKU TCMT16T308-FW4-WPP20G-WALTER should be used for exact identification and reordering. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for clarification purposes only. There is no affiliation between Metav Werkzeuge and the brand owners; the offered item is an original, factory-new product of the manufacturer.
TCMT16T308-FW4 WSM20S FW4 Wendeplatten - Walter Tools
Take advantage of a robust combination of Tiger‑tec Silver coating and the WSM20S grade for secure chip control and prolonged edge life when machining stainless steel and heat‑resistant alloys; order directly via Metav Werkzeuge or consult our specialists for tailored application advice. TCMT16T308-FW4 WSM20S indexable turning insert — Triangle 60°, 0.8 mm radius, Walter Tools A TCMT16T308-FW4 WSM20S indexable turning insert designed for demanding turning of stainless steel and high‑temperature alloys, featuring a Tiger‑tec Silver coating and an FW4 chipbreaker for stable cutting performance Tiger‑tec Silver coating for higher wear resistance Optimised FW4 chipbreaker for stable chips 0.8 mm corner radius for robust edge life Suited to stainless steel and heat‑resistant alloys Consistent productivity through coating and geometry The combination of the Tiger‑tec Silver coating and the WSM20S grade provides a reliable foundation for high‑temperature turning tasks. The coating supports thermal resistance and reduces flank wear, which in turn stabilises machining cycles and extends tool life. With the FW4 chipbreaker, chips are formed predictably, lowering the risk of built‑up edge and minimising interruptions. These technical choices translate into measurable process improvements: longer uninterrupted runtime and fewer insert changes, which supports leaner production and reduced throughput variability. Precision and application flexibility for difficult materials This insert’s Triangle 60° form and 0.8 mm corner radius create a balance between cutting edge strength and geometric versatility. The modest corner radius reduces edge chipping when machining tough, adhesive materials, while the 7° clearance angle enables consistent contact conditions along the cutting edge. The grade is formulated specifically for stainless steel and for heat‑resistant superalloys and titanium, so the insert is suitable where conventional grades would struggle with heat‑related degradation. Operators benefit from a predictable performance envelope and easier tool selection for challenging workpieces. Process security, repeatability and shopfloor advantages The tolerance class M and the standardised geometry ensure straightforward replacement and repeatable part quality across batches. The TCMT16T308-FW4 geometry and T3 thickness are compatible with common turning toolholders, allowing quick index changes and minimal re‑setup times. For production teams this means greater process security, fewer quality deviations and more consistent surface finishes. The result is not only technical reliability but also an economic one: less scrap, reduced rework and a clearer maintenance schedule for tooling stocks. Contact Metav Werkzeuge for application recommendations and to secure Walter Tools Tiger‑tec Silver inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TCMT16T308-FW4-WSM20S-WALTER Name: TCMT16T308-FW4 WSM20S Product type: Indexable turning insert (drehwendeschneidplatte) Series: Tiger‑tec Silver Grade: WSM20S Facts Clearance angle: 7° Corner radius: 0.8 mm Insert size: 16 mm Thickness: T3 Plate form: Triangle 60° Special features Chipbreaker: FW4 Tolerance class: M Suitable for: stainless steel; heat‑resistant superalloys and titanium Application focus: tough, heat‑generating turning operations FAQ What materials is this insert best suited for? The TCMT16T308-FW4 WSM20S insert is optimised for stainless steel and for heat‑resistant superalloys and titanium, offering stable cutting under high thermal loads. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating on the WSM20S grade increases thermal resistance and reduces flank wear, which prolongs the service life of the TCMT16T308-FW4 insert under demanding turning conditions. What benefits does the FW4 chipbreaker provide? The FW4 chipbreaker creates compact, controllable chips and supports continuous chip evacuation, reducing the risk of built‑up edge and improving surface finish when using the TCMT16T308-FW4 geometry. Is this insert compatible with standard turning holders? Yes; the TCMT16T308-FW4 format and T3 thickness match common toolholder systems for triangle‑insert turning, enabling quick index changes and repeatable positioning. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
TCMT16T308-MK4 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKK10S grade for reliable, wear‑resistant performance in cast iron turning. The triangular 60° geometry with a 0.8 mm corner radius and MK4 chipbreaker provides stable chip formation and predictable tool life; order via Metav Werkzeuge or consult the specialists for application support. TCMT16T308-MK4 WKK10S — Turning insert (triangle 60°, for cast iron) by Walter Tools TCMT16T308-MK4 WKK10S is an indexable turning insert designed for machining abrasive cast iron materials with a focus on process security and repeatable results TCMT16T308-MK4 WKK10S by Walter Tools Tiger‑tec Silver coated carbide grade WKK10S Optimised for cast iron machining (ISO K) Triangle 60° insert, 0.8 mm corner radius Reliable wear resistance for abrasive cast iron work The WKK10S grade in the Tiger‑tec Silver series is a coated carbide formulation optimised specifically for cast iron (ISO K). This composition balances wear resistance and sufficient toughness to handle the typically short, brittle chips produced during cast iron turning. The result is more consistent edge life and reduced frequency of index changes, which helps to maintain steady production rates and predictable tool consumption. Stable chip control and secure process behaviour The MK4 chipbreaker geometry combined with the triangle 60° shape ensures controlled chip formation and reliable evacuation in turning operations. A 0.8 mm corner radius increases edge strength for interrupted or heavy engagement scenarios, while the tolerance class M supports repeatable seating and stable clamping in compatible toolholders. These features work together to reduce the risk of unexpected edge failure and to support consistent surface quality across batches. Practical integration and application benefits Designed for straightforward integration into standard triangular insert pockets, this insert suits a broad range of cast iron turning tasks where process security and predictability are required. The insert's execution (T) and T3 thickness provide the necessary mechanical robustness, while the 7° free angle helps to balance cutting engagement and strength. For detailed cutting‑parameter recommendations or to assess suitability for a specific cast iron grade, consult the technical documentation or Metav Werkzeuge for tailored application advice. For cast iron turning operations, specify the TCMT16T308-MK4 WKK10S from Walter Tools and contact Metav Werkzeuge for expert technical advice at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data SKU: TCMT16T308-MK4-WKK10S-WALTER Designation: TCMT16T308-MK4 WKK10S Manufacturer: Walter Tools Core specifications Corner radius: 0.8 mm Insert size: 16 Free angle: 7° Plate thickness: T3 Plate form: Triangle 60° Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WKK10S Chipbreaker: MK4 Coating: coated carbide Suitable for: cast iron (ISO K) Execution: T FAQ Which materials is this insert intended for? The TCMT16T308-MK4 WKK10S from Walter Tools is specified for machining cast iron (ISO K), where the WKK10S grade provides abrasion resistance and chip behaviour optimised for that material group. What advantages does the Tiger‑tec Silver coating offer? The Tiger‑tec Silver coating on the WKK10S grade enhances wear resistance and helps to maintain cutting‑edge stability under abrasive conditions common in cast iron turning. How does the MK4 chipbreaker influence machining? The MK4 chipbreaker is designed to produce short, controllable chips in cast iron, improving evacuation and reducing the likelihood of entanglement, which supports reliable production cycles. What is the effect of the 0.8 mm corner radius? A 0.8 mm corner radius increases edge strength and contributes to a stable cutting edge, offering improved resistance to chipping and better performance in heavier engagement scenarios. Is this insert suitable for toolholders with standard triangular pockets? The triangle 60° geometry and tolerance class M are intended for standard triangular insert pockets; verification of seat fit and clamping dimensions with the chosen toolholder is recommended. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
TCMT16T308-MK4 WKK20S WKK20S Wendeplatten - Walter Tools
Combine high wear resistance, optimised chip control and a secure 7° relief angle for reliable cast-iron turning; order the insert directly via Metav Werkzeuge or consult our specialists for application support. TCMT16T308-MK4 WKK20S turning insert – triangular 60°, 7° relief | Walter Tools A TCMT16T308-MK4 WKK20S indexable turning insert engineered for productive cast-iron turning and boring applications. Tiger·tec Silver coating, WKK20S grade Optimised chip control MK4 chipbreaker 7° relief angle for secure cutting Triangular 60° insert, 0.8 mm corner radius Achieve consistent productivity in cast-iron machining The combination of Tiger·tec Silver technology and the WKK20S grade delivers measurable benefits when machining abrasive cast-iron alloys. The coated-carbide composition is tailored to the short, breaking chips and high abrasive wear typical for these materials, offering extended tool life and fewer insert changes. In practice this means more uninterrupted spindle time and a reduction in fixture handling — a direct contribution to lower unit costs and steadier throughput in serial production. Geometry that secures engagement and surface quality The insert’s triangular 60° form with a 0.8 mm corner radius provides a robust cutting edge for both interrupted cuts and steady axial engagement. The 7° relief reduces rubbing at the flank, improving cutting stability and decreasing heat build-up. The MK4 chipbreaker is optimised for cast-iron behaviour, promoting predictable chip formation and easier evacuation; the result is improved surface finish and reliable repeatability across batches, reducing rework and inspection effort. Practical benefits for process reliability and tool handling Designed as an indexable insert for turning and boring, this solution supports rapid edge changes and consistent set-up parameters. The insert’s execution (T) and plate designation make tool management straightforward within standard clamping systems, while the coated grade supports both roughing and mixed-operation scenarios in cast-iron production. Partnering this insert with proven clamping hardware and consistent tool-setting practices leads to higher process security and fewer unexpected interruptions on the shop floor. Integration into workflow and material suitability The TCMT16T308-MK4 WKK20S is explicitly suited to cast iron applications and benefits workshops seeking a balance between durability and versatile cutting performance. The triangular shape allows multiple indexing opportunities per insert, enhancing cost efficiency in high-volume environments. For best results, combine the insert with stable toolholders and verified cutting data for cast-iron grades; this approach ensures safe chip control and consistent part quality while reducing frequency of tool changes. Contact Metav Werkzeuge today for application advice or to secure the appropriate Walter Tools TCMT16T308-MK4 WKK20S insert; specialists are available by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: TCMT16T308-MK4-WKK20S-WALTER Designation: TCMT16T308-MK4 WKK20S Brand: Walter Tools Series: Tiger-tec Silver Grade: WKK20S Tolerance class: M Facts Relief angle: 7° Corner radius: 0.8 mm Insert size: 16 Plate form: Triangular 60° Chipbreaker: MK4 Thickness: T3 Special features Coating: Tiger·tec Silver Material suitability: Cast iron (K) Execution: T Application: Turning / boring indexable insert FAQ What materials is this insert intended for? The TCMT16T308-MK4 WKK20S from Walter Tools is optimised for cast iron applications and is designed to handle the abrasive wear and short-chip behaviour typical of these materials. How does the MK4 chipbreaker affect performance? The MK4 chipbreaker on this Walter Tools insert promotes controlled, short chips in cast-iron turning, improving evacuation and contributing to a more consistent surface finish. How many usable cutting edges does the triangular insert provide? Its triangular 60° geometry allows for multiple indexings; the shape offers up to three usable cutting edges before the insert requires replacement. What does the 7° relief angle mean for machining? A 7° relief reduces flank contact and heat generation during cutting, which improves stability and helps to extend the life of the cutting edge when machining cast iron. Is this insert suitable for both roughing and finishing operations? Yes — the combination of WKK20S grade and the MK4 chipbreaker makes the insert versatile for roughing and mixed-operation tasks in cast-iron machining, supporting both material removal and acceptable surface quality. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; www.walter-tools.com; info@walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT16T308-MM4 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold grade and the MM4 chipbreaker for reliable machining of stainless steel; the 16 mm triangular plate with a 0.8 mm corner radius and 7° relief angle supports stable cutting and repeatable results. Order the insert directly via Metav Werkzeuge or consult the technical team for tailored cutting data and application advice. TCMT16T308-MM4 WMP20G – Indexable turning and drilling insert, designed for stainless steel, Walter Tools The TCMT16T308-MM4 WMP20G is a triangular indexable insert engineered for medium to robust machining of stainless steel, combining the Tiger·tec Gold coating technology with an optimised chipbreaker for stable chip formation. Tiger·tec Gold coated grade WMP20G Optimised MM4 chipbreaker 16 mm triangular plate, 60° included angle 0.8 mm corner radius, 7° relief angle Higher process reliability through coating and grade The combination of the Tiger·tec Gold coating and the WMP20G cutting grade delivers consistent edge protection under higher temperatures common with stainless steel. Coated carbide substrates reduce friction and delay wear, which translates into longer tool life and fewer interruptions for tool changes. For production environments this means improved uptime and more predictable component quality. Predictable chip control and surface quality The MM4 chipbreaker is optimised to manage the chips that form when turning stainless steel, reducing the risk of built-up edge and promoting steady material evacuation. A stable chip flow helps to maintain tool engagement and supports reproducible surface finishes, decreasing rework and ensuring components meet tolerance requirements with less inspection effort. Accurate geometry for repeatable performance A 16 mm triangular plate with a 60° included angle, a 0.8 mm corner radius and a 7° relief angle provides a balance between robustness and cutting precision. The modest corner radius gives strength for interrupted cuts while still allowing fine-detail finishing where required. These geometric parameters support process stability across batch production and one-off runs. Application guidance and machining advantages This insert is intended mainly for stainless steel under medium to robust cutting conditions. The coated carbide chemistry of the WMP20G grade supports safe chip formation and good edge retention. For set-up recommendations, match feed and speed to the component OD and material condition; the combination of the Tiger·tec Gold coating and the MM4 chipbreaker reduces the likelihood of workhardening and enables efficient machining cycles. Contact Metav Werkzeuge for cutting data, availability and application support for the Walter Tools TCMT16T308-MM4 WMP20G insert Technical data Article number: TCMT16T308-MM4-WMP20G-WALTER Designation: TCMT16T308-MM4 WMP20G Series: Tiger·tec Gold Grade: WMP20G Manufacturer: Walter Tools Facts Plate size: 16 mm Plate thickness: T3 Corner radius: 0.8 mm Relief angle: 7° Plate form: Triangle 60° Tolerance class: M Special features Chipbreaker: MM4 Coating / technology: Tiger·tec Gold (coated carbide) Execution: T Application: stainless steel Designation (ISO): TCMT16T308-MM4 WMP20G FAQ Is this insert suitable for machining stainless steel? Yes. The TCMT16T308-MM4 WMP20G by Walter Tools is specified for stainless steel and the WMP20G grade supports secure chip formation under medium to robust cutting conditions. What is the function of the MM4 chipbreaker? The MM4 chipbreaker on this insert promotes controlled chip formation and evacuation, helping to prevent built-up edge and supporting consistent surface finish when machining stainless steel. How does the Tiger·tec Gold coating benefit production runs? Tiger·tec Gold reduces friction and increases thermal resistance, which extends tool life and contributes to more predictable tool-change intervals and stable production quality for the TCMT16T308-MM4 WMP20G. Which geometric features support interrupted cuts? The 0.8 mm corner radius and the 60° triangular form provide mechanical strength for interrupted and semi-finishing operations while maintaining the ability to achieve acceptable surface quality. How is the TCMT16T308-MM4 WMP20G identified in spare parts lists? The insert is listed as TCMT16T308-MM4 WMP20G or by SKU TCMT16T308-MM4-WMP20G-WALTER for ordering and inventory purposes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, brand-new goods of the manufacturer Walter Tools.
TCMT16T308-MM4 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a robust WMP20S grade and precise geometry for dependable turning of stainless steels; this results in stable chip formation, extended edge life and consistent component quality. Order or request tailored advice via Metav Werkzeuge for smooth integration into production. TCMT16T308-MM4 WMP20S — triangle 60° indexable insert, Tiger·tec Silver, for stainless steel — Walter Tools A TCMT16T308-MM4 WMP20S triangle insert engineered for reliable turning of stainless steel under medium to robust conditions, combining advanced coating technology with a controlled chipformer for process stability Tiger·tec Silver coating for process security Optimised chip control MM4 Triangle 60° with 0.8 mm corner radius Engineered for stainless steel M-group High process reliability through advanced coating and grade The use of Tiger·tec Silver together with the WMP20S carbide grade provides a clear advantage when machining stainless steel: improved thermal resistance and reduced tendency for built-up edge translate into stable cutting and longer intervals between index changes. The coated hardmetal is designed to handle the heat and toughness typical of M-group materials, so tool life is extended and the repeatability of components is increased. This technical combination supports higher material removal rates while maintaining surface integrity. Consistent surface finish thanks to geometry and chip control A triangle 60° shape with 0.8 mm corner radius and the MM4 chipbreaker optimise the contact geometry and chip formation for turning tasks. The modest corner radius balances edge strength and finishing capability, reducing the risk of edge chipping in interrupted cuts. With a 7° clearance and a compact T3 thickness in a 16 mm plate format, the insert offers rigidity and clearance to minimise rubbing, leading to improved surface finish and predictable dimensional results in series production. Practical advantages for workshop integration and cost efficiency The insert's specification makes it suitable for a range of turning operations where stainless steel is predominant, from semi-finishing to more robust cuts. The standard triangular format allows for multiple indexing positions, which reduces tooling cost per component. The MM4 chip control helps avoid long, stringy chips that interrupt cycle times, enhancing machine uptime. Selecting this insert allows process engineers to achieve a balance of productivity and tool economy while maintaining component quality. For machining stainless steel with proven Tiger·tec Silver performance, contact Metav Werkzeuge for individual application advice or to arrange supply: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: TCMT16T308-MM4-WMP20S-WALTER Designation: TCMT16T308-MM4 WMP20S Product type: Indexable insert (triangle) Manufacturer: Walter Tools Series: Tiger-tec Silver Facts Free angle: 7° Corner radius: 0.8 mm Shape: Triangle 60° Insert size: 16 mm Thickness: T3 Grade: WMP20S Materials & features Coating technology: Tiger·tec Silver Chipbreaker: MM4 Material group suitability: stainless steel (M) Intended use: reliable chip formation under medium to robust conditions FAQ What materials is this insert suitable for? The TCMT16T308-MM4 WMP20S is designed primarily for machining stainless steel (ISO group M) and supports stable chip formation and edge life when working with these materials. What does the MM4 chipbreaker do? The MM4 chipbreaker on this insert controls chip shape and evacuation, helping to avoid long chips and improving process security during turning operations with stainless steel. How does the Tiger·tec Silver coating benefit production? Tiger·tec Silver coating increases thermal resistance and reduces built-up edge, which in turn extends effective edge life and supports consistent surface quality with the TCMT16T308-MM4 WMP20S. Walter Tools is a brand of Walter Deutschland GmbH. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not indicate any affiliation between our company and the named brands. The offered item is original, brand-new goods of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
TCMT16T308-MM4 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of a high‑performance cutting solution that combines the Tiger‑tec Silver coating with the WSM10S grade for reliable machining of stainless steel and heat‑resistant alloys; the MM4 chipbreaker and a 0.8 mm corner radius deliver controlled chips and consistent edge life. Order directly via Metav Werkzeuge or contact our consultants for cutting data and integration advice. TCMT16T308‑MM4 WSM10S — Turning indexable insert, Tiger‑tec Silver (Walter Tools) The TCMT16T308‑MM4 WSM10S is a triangular turning indexable insert optimised for the machining of stainless steel and high‑temperature alloys in demanding turning and boring operations. Tiger‑tec Silver coating for high durability WSM10S grade for stainless steel and superalloys MM4 chipbreaker for reliable chip control Triangle 60° with 0.8 mm corner radius Maximise process stability and tool life with advanced coating technology The Tiger‑tec Silver coating, combined with the WSM10S carbide grade, provides a balance of wear resistance and edge robustness, designed specifically for tough turning tasks. This coating reduces flank wear under elevated temperatures and helps maintain a stable cutting edge when machining stainless steel and heat‑resistant alloys. The result is fewer interruptions for tool changes and a reproducible tool life that supports predictable production planning and cost‑efficiency. Predictable chip formation and surface quality for smoother cycles The MM4 chipbreaker geometry promotes segmented, controllable chips that evacuate cleanly from the cutting zone, reducing the risk of built‑up edge on sensitive surfaces. Combined with the 0.8 mm corner radius and a 7° clearance angle, this geometry supports a reliable cutting pattern and enhances surface finish, particularly when finishing passes are required. The design emphasises consistency: less rework, fewer rejects, and improved throughput for serial production. Tailored for stainless steel and demanding materials This insert is specified for ISO group M (rostfreie Stähle) and ISO group S (heat‑resistant superalloys and titanium) applications. The grade’s composition and coating strategy address the specific challenges of these materials—poor heat conduction, work‑hardening tendencies and aggressive edge loading—by favouring thermal stability and controlled wear. For machine shops tackling stainless components or aerospace alloys, the insert supports safer chip behaviour and sustained cutting performance under interrupted cuts or high thermal loads. Integration advice and lean implementation in production With a triangle 60° form and a 16 mm size, the insert is compatible with common turning and boring toolholders and offers easy indexing for rapid tool renewals. The T3 thickness and the M tolerance class ensure repeatable seating and concentricity in systems that demand precision. For best results, combine the insert with appropriate coolant strategies and validated cutting parameters; technical consultations are available to adapt feeds, speeds and depths of cut to specific machine tool and workpiece combinations, helping to shorten ramp‑up time and reduce trial‑and‑error. Discuss the application of Walter Tools’ TCMT16T308‑MM4 WSM10S with Metav Werkzeuge for tailored cutting data and seamless integration into production: contact Metav Werkzeuge for expert advice and parameter support. Technical data SKU: TCMT16T308-MM4-WSM10S-WALTER Product type: drilling/boring and turning indexable insert Designation: TCMT16T308-MM4 WSM10S Series: Tiger‑tec Silver Grade: WSM10S Manufacturer: Walter Tools Core specifications Plate size: 16 mm Corner radius: 0.8 mm Clearance angle: 7° Plate thickness: T3 Plate form: Triangle 60° Tolerance class: M Chipbreaker: MM4 Features / Applications Coating: Tiger‑tec Silver Material groups: S / M Suitable for: stainless steel (ISO M), heat‑resistant superalloys and titanium (ISO S) Indexable insert designation: TCMT16T308‑MM4 Typical use: demanding turning and boring in tough materials FAQ What materials is this insert intended for? The TCMT16T308‑MM4 WSM10S insert is designed primarily for stainless steel (ISO M) and for heat‑resistant superalloys and titanium (ISO S), offering stability under high thermal load. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker in the TCMT16T308‑MM4 WSM10S promotes segmented chip formation and controlled evacuation, which improves surface quality and reduces the risk of built‑up edge in continuous and interrupted cuts. Is this insert compatible with standard turning toolholders? Yes, the triangle 60° form and 16 mm size of TCMT16T308‑MM4 WSM10S are compatible with common turning and boring toolholders that accept TCMT‑style triangular inserts. What are the main advantages of the Tiger‑tec Silver coating? Tiger‑tec Silver on the TCMT16T308‑MM4 WSM10S improves wear resistance and thermal stability, extending edge life and supporting longer uninterrupted production runs on challenging materials. Can Metav Werkzeuge provide cutting data for this insert? Metav Werkzeuge can supply recommended feeds, speeds and coolant strategies for the TCMT16T308‑MM4 WSM10S to help optimise tool life and part quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered item is original, brand‑new goods from the manufacturer.
TCMT16T308-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Take advantage of the combination of reliable edge stability and a heat‑resistant Tiger‑tec Silver grade for secure machining of demanding alloys; the insert’s MM4 chipbreaker and triangle form ensure consistent chip control. Order the TCMT16T308‑MM4 WSM20S directly via Metav Werkzeuge or ask our consultants if needed. TCMT16T308‑MM4 WSM20S — Drilling/Boring and Turning Indexable Insert, Triangle 60°, Walter Tools TCMT16T308‑MM4 WSM20S is a triangle turning and boring insert designed for demanding applications in rostfreier Stahl and heat‑resistant alloys Tiger‑tec Silver coating for heat resistance Optimised MM4 chipbreaker for stable chips Triangle 60° form for robust indexing 0.8 mm nose radius for precise finishing 7° clearance angle reduces rubbing Increased productivity through a heat‑resistant grade The insert uses the Tiger‑tec Silver coating and the WSM20S grade, which together provide enhanced thermal resilience and wear resistance when machining rostfreier Stahl and other difficult‑to‑cut alloys. This combination reduces edge build‑up and extends tool life, meaning fewer tool changes and higher uptime on the workshop floor. The technical advantage is expressed in improved process stability: the coating manages heat at the cutting edge while the substrate maintains toughness, resulting in reliable performance in continuous turning and boring cycles. Geometry designed for predictable chip control and surface quality A triangle 60° form with an MM4 chipbreaker and a 0.8 mm nose radius delivers both robustness and the potential for fine surface finishes. The chipbreaker shapes and breaks chips to avoid entanglement, especially important when machining sticky or work‑hardening materials. The 7° clearance angle reduces flank rubbing and heat generation. For users less familiar with insert geometry: the nose radius determines the achievable surface finish and strength at the cutting tip; a 0.8 mm radius is a balanced option for general turning tasks that seek a good compromise between finish and edge stability. Practical benefits for production and toolroom planning The TCMT format allows fast indexing on standard toolholders and reduces setup time in mixed‑operation environments. The insert’s combination of coated carbide grade and MM4 chipbreaker supports a predictable tool change rhythm and consistent part quality, which simplifies process documentation and reduces scrap. For procurement and planning, the insert’s robust configuration means fewer tool variants are necessary across rostfreier Stahl and nickel‑based alloys, supporting leaner tool cabinets and lower logistical effort. Choosing the insert for specific applications When machining components with challenging material behaviour—such as low thermal conductivity or a tendency to work‑harden—the WSM20S grade is tailored to keep the cutting edge intact and produce regular chips. The insert is particularly suitable for medium to heavy turning operations and for boring where secure edge life is required. Selecting the appropriate cutting data (speed, feed, depth of cut) in line with the machine’s rigidity and material condition will unlock the insert’s full potential. For customers who need help translating material characteristics into cutting parameters, consultation is available to align the insert’s advantages with exact production targets. For stable, heat‑resistant performance choose the Walter Tools Tiger‑tec Silver TCMT16T308‑MM4 WSM20S — contact Metav Werkzeuge for tailored advice and prompt delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TCMT16T308‑MM4‑WSM20S‑WALTER SKU: TCMT16T308‑MM4‑WSM20S‑WALTER Brand: Walter Tools Facts Insert size: 16 Insert shape: Triangle 60° Nose radius: 0.8 mm Clearance angle: 7° Thickness: T3 Special features Coating / series: Tiger‑tec Silver Grade / sort: WSM20S Chipbreaker: MM4 Suitable for: rostfreier Stahl; heat‑resistant superalloys and titanium (ISO groups M and S) Application: Drilling/boring and turning indexable insert FAQ What materials is this insert intended for? The TCMT16T308‑MM4 WSM20S is optimised for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), offering improved edge stability in these challenging materials. Which chipbreaker does the insert use and why is it important? This insert features the MM4 chipbreaker; the MM4 geometry promotes consistent chip formation and evacuation, reducing the risk of chip‑related interruptions in turning and boring operations. How does the Tiger‑tec Silver coating benefit production? The Tiger‑tec Silver coating on the WSM20S grade increases thermal resistance at the cutting edge, which contributes to longer tool life and steadier cutting conditions during continuous machining of difficult alloys. Can the insert be used for finishing passes? With a 0.8 mm nose radius, the insert balances strength and surface finish capability; it can be used for semi‑finishing and certain finishing operations depending on cutting parameters and machine rigidity. Is the insert compatible with standard toolholders? The TCMT form is a common indexable insert format; the TCMT16T308‑MM4 fits standard toolholders designed for TCMT‑style triangular inserts, allowing quick indexing and replacement. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com