TS16-ER-A60-F5 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the ER-A60-F5 chipbreaker for reliable stainless steel turning, delivering stable chip formation and extended tool life; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TS16-ER-A60-F5 WMP32G — Turning insert with Tiger·tec Gold coating by Walter Tools TS16-ER-A60-F5 WMP32G is an indexable turning insert engineered for secure chip control and robust performance in stainless steel turning operations Tiger·tec Gold coating for high heat resistance ER-A60-F5 chipbreaker for optimised chip control Designed for stainless steel (M) machining Stable cutting edge and improved tool life Consistent performance with a premium coating The combination of the Tiger·tec Gold technology and a coated carbide substrate provides a reliable basis for machining stainless steel under medium to robust conditions. The advanced coating reduces thermal and mechanical wear, which helps to maintain a consistent cutting edge over longer tool life. In practice this means fewer tool changes, more predictable machining cycles and the potential for higher productivity on series and batch work. The composition of the grade supports secure chip formation even where materials tend to form built-up edge. Controlled machining thanks to the ER-A60-F5 chipbreaker The ER-A60-F5 chipbreaker is designed to shape and evacuate chips efficiently, reducing the risk of entanglement and surface damage. By promoting short, segmented chips and minimising contact between chip and flank, the chipbreaker lowers cutting forces and helps to avoid the typical problems associated with turning austenitic and other stainless steels — such as spring-back and smearing. This feature supports stable machining at elevated temperatures and contributes directly to process reliability and surface finish stability. Practical benefits for workshop workflows Using this insert in appropriate toolholders yields tangible process advantages: improved edge retention, more consistent cycle times and reduced rework. The grade WMP32G is tuned for applications where thermal load and material toughness challenge standard inserts. For production environments that require reproducible results, the insert offers a balance between wear resistance and chip control that supports both roughing and finishing steps when selected with suitable cutting data. Technical guidance and application support For best results, select cutting parameters aligned with the workpiece alloy and the rigidity of the machine setup; coolant strategy and positive lead angles will influence chip behaviour with WMP32G grades. Where uncertainty exists about compatibility with a specific stainless steel grade or machining strategy, detailed cutting data and application charts are available on request. Metav Werkzeuge can assist with parameter setting and supply chain details to integrate this insert into existing turning processes. For tailored recommendations on the Tiger·tec Gold TS16-ER-A60-F5 WMP32G turning insert and supply options, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt technical advice and ordering assistance. Technical Data Article number: TS16-ER-A60-F5-WMP32G-WALTER Designation: TS16-ER-A60-F5 WMP32G Manufacturer: Walter Tools Facts Material group: M (stainless steels) Chipbreaker: ER-A60-F5 Series: Tiger·tec Gold Special features Coating: Tiger·tec Gold (coated carbide) Grade: WMP32G Application: Stainless steel machining, medium to robust conditions Benefit: Optimised chip control and stable edge retention FAQ What materials is this insert suitable for? The TS16-ER-A60-F5 WMP32G insert is formulated primarily for stainless steel (material group M) and performs reliably under medium to robust machining conditions. How does the ER-A60-F5 chipbreaker affect machining? The ER-A60-F5 chipbreaker promotes segmented, controllable chips and reduces built-up edge, which improves surface quality and reduces the likelihood of chip-related interruptions during turning. Is this grade suitable for finishing operations? Yes—with appropriate cutting data and a rigid setup, the WMP32G grade provides the edge stability and surface integrity needed for finishing passes as well as heavier cuts. Can Metav Werkzeuge provide application parameters for this insert? Metav Werkzeuge can supply recommended cutting speeds, feeds and coolant strategies tailored to the TS16-ER-A60-F5 WMP32G insert and the specific stainless steel grade being machined. What distinguishes Tiger·tec Gold from other coatings? Tiger·tec Gold offers enhanced thermal resistance and wear protection on coated carbide substrates, supporting longer tool life and consistent performance in demanding stainless steel applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, brand-new goods from the manufacturer and supplied as such. Walter Tools is a brand of Walter AG, a leading manufacturer of precision tools for metalworking.
TS16-ER-A60-M5 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of a high-performance Tiger·tec Gold grade and a specialised ER-A60-M5 chipbreaker to achieve stable chip control and longer tool life in rostfreier Stahl turning operations; order directly via Metav Werkzeuge or request advice from our specialists. TS16-ER-A60-M5 WMP32G turning indexable insert — Walter Tools, Tiger·tec Gold, for rostfreier Stahl TS16-ER-A60-M5 WMP32G is a coated carbide turning indexable insert designed for reliable performance in medium to robust rostfreier Stahl machining. Tiger·tec Gold coated carbide for longer tool life ER-A60-M5 chipbreaker for controlled chip formation Optimised for rostfreier Stahl machining Precision indexable insert for consistent surface quality Greater uptime from a specialised grade The WMP32G grade, part of the Tiger·tec Gold series, delivers improved wear resistance and stable cutting edge retention under demanding conditions. Coated carbide technology reduces flank wear and supports steady-cutting performance when machining rostfreier Stahl, a material group known for toughness and heat generation. By choosing a grade engineered for these challenges, process interruptions are reduced and tool change frequency is lowered, which translates into measurable gains in shop-floor efficiency. Predictable chip control for safer operations The ER-A60-M5 chipbreaker is designed to promote short, easily manageable chips in turning operations. A chipbreaker shapes the metal flow ahead of the insert, preventing long swarf and reducing the risk of entanglement or workpiece surface damage. In practice, this means fewer interruptions, improved surface finish and a safer environment at the machine. The geometry is particularly suited to the behaviour of rostfreier Stahl, where secure chip formation is essential to avoid built-up edge and thermal issues. Improved productivity through fewer indexings As an indexable insert, this design allows multiple cutting edges per insert body, so downtime for tool reversal is minimised. The combination of a resilient WMP32G coating and the ER-A60-M5 geometry supports longer cutting intervals under medium to heavy-duty conditions. For production environments where part-to-part consistency matters, this results in shorter cycle times and a better cost-per-cut ratio without compromising surface integrity. Practical application guidance and compatibility This insert is intended primarily for the ISO M group — notably rostfreier Stahl — and performs best in medium to robust cutting scenarios. While the grade excels in rostfreier Stahl, users should verify machine rigidity and cooling strategy to fully exploit the coated carbide benefits. The ER-A60-M5 chipbreaker assists in chip evacuation, but recommended cutting parameters depend on the specific machine and workpiece setup; Metav Werkzeuge can provide tailored recommendations if required. Trusted performance from Walter Tools technology Walter Tools’ Tiger·tec Gold range is developed for stable production results and reliable tool life under challenging conditions. The TS16-ER-A60-M5 WMP32G insert reflects that philosophy by combining an application-tailored coating with a proven chip control geometry. For workshops aiming to balance productivity and surface quality in rostfreier Stahl turning, this insert is a technically sound choice backed by a manufacturer reputation for consistency. For specification advice or to discuss suitability for a particular rostfreier Stahl application, contact Metav Werkzeuge — Metav Werkzeuge will advise on the TS16-ER-A60-M5 WMP32G and on optimised machining parameters via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TS16-ER-A60-M5-WMP32G-WALTER Product type: Drehwendeschneidplatte Designation: TS16-ER-A60-M5 WMP32G Manufacturer: Walter Tools Facts Insert size: TS16 Cutting angle: 60° Material code: M (rostfreie Stähle) Special features Series: Tiger·tec Gold Grade: WMP32G (coated carbide) Chipbreaker: ER-A60-M5 Application focus: rostfreier Stahl Type: indexable turning insert FAQ What materials is this insert suitable for? The TS16-ER-A60-M5 WMP32G insert is formulated for the ISO M material group and is particularly suited to machining rostfreier Stahl. What does the WMP32G grade offer? WMP32G is a Tiger·tec Gold coated carbide grade developed for improved wear resistance and stable edge life when turning rostfreier Stahl. How does the ER-A60-M5 chipbreaker affect machining? The ER-A60-M5 chipbreaker promotes short, controlled chips and helps to avoid long swarf, improving safety and surface quality during cutting with the TS16-ER-A60-M5 insert. Is this an indexable insert and what is the benefit? Yes — the TS16-ER-A60-M5 WMP32G is an indexable insert; multiple cutting edges per insert reduce downtime and improve cost-efficiency in production turning tasks. Can this insert be used for light finishing passes? While optimised for medium to robust conditions, the WMP32G grade and ER-A60-M5 geometry can deliver consistent surface results; specific finishing suitability depends on the chosen feeds and speeds. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is original, factory-new merchandise of the manufacturer.
TS16-ER-AG55 WMP32G WMP32G Wendeplatten - Walter Tools
Combine the proven Tiger‑tec Gold grade WMP32G with the ER‑AG55 chipbreaker to secure stable chip formation and long tool life when machining stainless steel; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TS16‑ER‑AG55 WMP32G indexable turning insert (stainless steel) by Walter Tools The TS16‑ER‑AG55 WMP32G is an indexable turning insert engineered for productive turning of stainless steel under medium to robust cutting conditions. Tiger‑tec Gold coated grade WMP32G Optimised for stainless steel (M) Stable chip control and edge security Suited to medium to robust cutting conditions Reliable cutting performance for stainless steel components The coated cemented carbide grade WMP32G, realised with Tiger‑tec Gold technology, is tailored for the challenges of machining stainless steel: material toughness, tendency to form built‑up edge and elevated heat at the cutting zone. The combination of a hard, wear‑resistant coating and a matched substrate enables stable chip formation and consistent edge integrity over multiple indexings. For production environments focused on repeatability, this insert reduces unscheduled tool changes and supports predictable cycle times while maintaining acceptable surface quality. Designed chip control and process security for turning operations The integrated ER‑AG55 chipbreaker is engineered to direct and segment chips in conditions where stainless alloys would otherwise produce long, stringy swarf. The result is easier chip evacuation from the cutting zone and reduced risk of re‑cutting, which conserves the cutting edge and improves component finish. These technical characteristics translate into tangible benefits on the shop floor: fewer interruptions, reduced secondary handling, and improved overall equipment effectiveness (OEE). The insert’s geometry and coating technology together enhance thermal stability and wear resistance under moderate to robust metal‑cutting loads. Practical integration and selection guidance for workshop use This indexable insert is intended for standard turning toolholders compatible with TS16‑style inserts and can be selected whenever the workpiece material and cutting conditions require focused resistance against built‑up edge. When specifying tooling combinations, pair the insert with a rigid holder and appropriate coolant strategy to exploit the WMP32G grade’s strengths. The configuration supports a balanced approach: maintain cutting speeds and feeds that prevent excessive heat concentration while benefiting from the coating’s wear protection and the chipbreaker’s control. For unfamiliar alloys or unusual part geometries, rely on process data sheets and Metav Werkzeuge’s application advice to determine optimal parameters. Contact Metav Werkzeuge for a tailored recommendation on the Walter Tools TS16‑ER‑AG55 WMP32G insert and to confirm availability and delivery options Technical data Article number: TS16-ER-AG55-WMP32G-WALTER Designation: TS16‑ER‑AG55 WMP32G Product type: Indexable turning insert Core data Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: ER‑AG55 Material group code: M Special features Coated cemented carbide Optimised for stainless steel machining Stable chip formation and edge security Suitable for medium to robust cutting conditions Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The TS16‑ER‑AG55 WMP32G insert is optimised for stainless steel (material group M), offering stable chip control and wear resistance in such applications. What does the WMP32G grade mean for tool life? The WMP32G grade, part of the Tiger‑tec Gold family, provides a wear‑resistant coating and substrate combination that extends tool life under moderate to robust conditions when machining stainless steel. How does the ER‑AG55 chipbreaker affect machining? The ER‑AG55 chipbreaker improves chip segmentation and evacuation, reducing the likelihood of built‑up edge and enhancing surface finish during turning operations. Is the insert compatible with standard TS16 toolholders? The designation TS16 indicates the insert geometry; it is intended for toolholders designed for TS16‑style indexable inserts—verify holder compatibility when assembling tooling. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks, including Walter Tools, are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
TS16-ER-AG55-F5 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, precise chip control and consistent edge life to maintain stable production when machining stainless steels; order this insert directly via Metav Werkzeuge or consult the team for application-specific advice. TS16-ER-AG55-F5 WMP32G — Indexable turning insert, coated carbide for stainless steel (Walter Tools) The TS16-ER-AG55-F5 WMP32G is an indexable turning insert engineered for secure chip formation and reliable performance when machining stainless steels under medium to robust conditions. Tiger·tec Gold coated carbide, high wear resistance Optimised for machining stainless steels (M) ER-AG55-F5 chipbreaker for stable chip control Consistent edge life for productive turning Stable cutting on rostfreie Stähle for predictable results The combination of the WMP32G grade and Tiger·tec Gold coating delivers coated carbide properties that reduce adhesive wear and help prevent built-up edge when machining stainless steel. The ER-AG55-F5 chipbreaker promotes controlled chip formation and evacuation, which directly benefits surface finish and reduces the risk of interrupted cuts. For workshop managers and production engineers this means fewer stoppages, more repeatable part quality and less scrap in serial turning operations. Increased productivity through prolonged tool life and process security Thanks to the engineered coating and grade chemistry, the insert offers consistent edge life across a range of cutting conditions typical for rostfreie Stähle. Stable wear characteristics contribute to predictable tool change intervals, simplifying production planning and improving throughput. The insert’s design supports productive material removal rates while maintaining dimensional accuracy, which is particularly valuable where process reliability and cycle time reduction are priorities. Practical application guidance and compatibility This indexable insert is intended for turning operations on stainless steels (material group M) in applications from semi-finishing to robust cutting, depending on setup and machining parameters. The ER-AG55-F5 chipbreaker is optimised for secure chip control under the thermal and adhesive tendencies of rostfreie Stähle; using appropriate coolant strategies and stable clamping will maximise the insert’s performance. For tool selection, match the insert geometry to the lathe holder and the intended depth of cut to achieve the balance between surface quality and productivity. Quality assurance and brand reliability Manufactured by a leading provider of precision tooling, the insert reflects Walter Tools’ focus on a stable cutting edge and productive machining. The WMP32G grade is a coated carbide solution tailored to the machining behaviours of rostfreie Stähle, delivering process security and repeatable results. For procurement and process optimisation, combine these inserts with advised cutting parameters and regular monitoring of tool wear to sustain high-quality output over longer production runs. Contact Metav Werkzeuge today to discuss the TS16-ER-AG55-F5 WMP32G insert from Walter Tools and receive tailored recommendations for stainless steel turning applications — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert support Technical Data Article number: TS16-ER-AG55-F5-WMP32G-WALTER Product: Indexable turning insert Designation: TS16-ER-AG55-F5 WMP32G Grade: WMP32G Series: Tiger·tec Gold Manufacturer: Walter Tools Data Material group: M Suitable for: rostfreier Stahl Special features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: ER-AG55-F5 Application: machining rostfreie Stähle Type: indexable turning insert FAQ What materials is this insert suitable for? The TS16-ER-AG55-F5 WMP32G insert is designed primarily for rostfreie Stähle (stainless steels) and supports stable chip formation under adhesive and heat-prone cutting conditions. How does the ER-AG55-F5 chipbreaker improve performance? The ER-AG55-F5 chipbreaker facilitates controlled chip formation and evacuation, reducing the likelihood of built-up edge and improving surface finish during turning of stainless steels with the WMP32G grade. Can this insert be used for finishing and semi-finishing operations? Yes, the geometry and grade make the insert versatile for semi-finishing to more robust turning operations, with process settings adjusted to the desired surface quality and removal rate. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-ER-AG60 WMP22G WMP22G Wendeplatten - Walter Tools
Take advantage of a durable, Tiger·tec Gold-based cutting grade together with an optimised chipbreaker to maintain process stability when machining rostfreien Stahl; the combination reduces tool changes and improves surface quality. Order the TS16-ER-AG60 WMP22G directly via Metav Werkzeuge or consult the team for application-specific recommendations. TS16-ER-AG60 WMP22G — indexable insert for rostfreien Stahl, Tiger·tec Gold by Walter Tools The TS16-ER-AG60 WMP22G is a coated carbide indexable insert designed for secure chip control and reliable cutting-edge stability in medium to robust machining of rostfreien Stahl. Tiger·tec Gold coated grade WMP22G Optimised chip control ER-AG60 Designed for rostfreien Stahl machining Coated carbide for medium to robust conditions Consistent performance where heat and toughness meet The combination of the Tiger·tec Gold technology and a coated carbide base ensures that the insert copes well with the specific challenges of machining rostfreien Stahl — a material group prone to toughness, built-up edge and high thermal loading. The WMP22G cutting grade is engineered for stable cutting edges and improved resistance to abrasion, which translates into fewer interruptions for tool changes and a more predictable process window. By using a grade optimised for these demands, manufacturers benefit from an overall uplift in throughput and reduced scrap rates, supporting continuous production flow. Predictable chip formation and reduced process variation The ER-AG60 chipbreaker is shaped to promote controlled chip formation under the medium to robust cutting conditions typical for rostfreien Stahl. Stable chips lower the risk of recutting and machine stoppages, while consistent chip evacuation contributes directly to surface quality and dimensional repeatability. In practice, this means a more reliable machining cycle and less variability between batches. The insert’s engineered geometry supports repeatable contact conditions at the cutting edge, which aids planning of tool life and minimises unexpected downtime. Practical advantages that support shop-floor productivity Using an indexable insert from the Tiger·tec Gold series reduces handling complexity compared with regrinding or brazed tooling. The WMP22G variety offers a balance between wear resistance and toughness, making it suitable for operations where both edge stability and flank wear control are required. The result is a lower frequency of insert changes and consistent component finish, contributing to leaner tool management and predictable maintenance intervals. These practical benefits support operational efficiency and offer a clear route to optimising cost per part in medium- to high-volume environments. Material guidance and application focus This insert is specified for the ISO material group M, explicitly for rostfreien Stahl, and is intended for medium to robust cutting regimes. The coated carbide substrate combined with the Tiger·tec Gold coating provides good thermal and adhesive resistance for common rostfreien Stahl alloys. For new applications or unusual alloys within the M group, a short qualification series under representative cutting conditions is recommended to establish optimal parameters. The insert is suitable for users aiming for a balance between productivity and surface integrity in demanding rostfreien Stahl machining tasks. For machining optimisation with Tiger·tec Gold technology, contact Metav Werkzeuge for availability and application advice on the TS16-ER-AG60 WMP22G by Walter Tools Technical data SKU: TS16-ER-AG60-WMP22G-WALTER Label: Drehwendeschneidplatte TS16-ER-AG60 WMP22G Walter Tools Product type: Drehwendeschneidplatte ISO designation: TS16-ER-AG60 WMP22G Grade: WMP22G Series: Tiger·tec Gold Facts Material group: M (rostfreien Stahl) Chipbreaker: ER-AG60 Substrate: coated carbide Application focus: medium to robust conditions Special features Tiger·tec Gold coating technology WMP22G cutting grade for rostfreien Stahl Stable chip formation and chip control Designed for reliable cutting-edge behaviour Manufacturer: Walter Tools FAQ What material is the TS16-ER-AG60 WMP22G intended for? The TS16-ER-AG60 WMP22G by Walter Tools is specified for the ISO material group M, making it suitable for machining rostfreien Stahl under medium to robust conditions. What does the Tiger·tec Gold designation mean for performance? Tiger·tec Gold indicates a high-performance coating and substrate combination that enhances wear resistance and edge stability; the TS16-ER-AG60 WMP22G therefore offers improved thermal management and longer effective life in rostfreien Stahl applications. How does the ER-AG60 chipbreaker affect machining? The ER-AG60 chipbreaker on the TS16-ER-AG60 WMP22G promotes controlled chip formation, which reduces recutting and helps maintain surface quality and process stability during continuous machining. Is the TS16-ER-AG60 WMP22G suitable for heavy interrupted cuts in rostfreien Stahl? The WMP22G grade is designed for medium to robust service conditions; while it provides enhanced toughness and wear resistance, specific suitability for heavy interruptions should be validated in trial cuts under representative conditions. Where can more technical specifications for the TS16-ER-AG60 WMP22G be found? Detailed cutting data and application notes for the TS16-ER-AG60 WMP22G are available from Metav Werkzeuge; the insert’s designation and series information will help to match optimal machining parameters. Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Trademarks and product names mentioned are the property of their respective owners. Brand names are cited for clarification only and imply no affiliation between Metav Werkzeuge and the brand owners. The offered article is an original, factory-new product from the manufacturer.
TS16-ER-AG60 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for stable chip formation and high process security when machining stainless steel; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. TS16-ER-AG60 WMP32G indexable turning insert — Tiger·tec Gold coating, for stainless steel | Walter Tools TS16-ER-AG60 WMP32G is an indexable turning insert optimised for medium to robust machining of stainless steel, delivering consistent edge stability and reliable chip control Tiger·tec Gold coating for extended tool life Secure chip control with ER-AG60 chipbreaker Optimised for stainless steel machining Consistent performance for stainless steel machining The TS16-ER-AG60 WMP32G insert combines a WMP32G grade with the Tiger·tec Gold coating to address the challenges of machining stainless steel. The coated carbide substrate supports stable chip formation under higher temperatures and tougher cut conditions, which translates into fewer interruptions and more predictable cycle times. As a result, process reliability and surface integrity are improved, reducing rework and enhancing overall productivity. Coating and geometry that boost productivity The insert is manufactured as a coated carbide grade with a dedicated ER-AG60 chipbreaker designed to control chip flow during medium to robust cutting. The coating reduces abrasive wear and helps maintain a sharp cutting edge, while the chipbreaker geometry encourages manageable chip shapes that reduce workpiece contact and heat concentration. For operations seeking to increase machining throughput without compromising finish, this combination offers a clear technical advantage. Practical integration and process guidance Integration into turning applications is straightforward: the insert’s designation and chipbreaker indicate suitability for holding systems compatible with TS16-style indexable solutions. The construction supports secure clamping and stable cutting conditions, contributing to enhanced process security during longer runs. When adapting cutting data, prioritise stable fixture setup and adequate coolant strategy to exploit the insert’s strengths in stainless steel applications. For tailored recommendations on Walter Tools’ TS16-ER-AG60 WMP32G and optimal machining parameters for stainless steel, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TS16-ER-AG60-WMP32G-WALTER Description: Indexable turning insert TS16-ER-AG60 WMP32G Walter Tools Manufacturer: Walter Tools Facts Grade designation: WMP32G Material group: M (stainless steels) Special features Series: Tiger·tec Gold Chipbreaker: ER-AG60 ISO designation: TS16-ER-AG60 WMP32G Substrate: coated carbide FAQ What materials is this insert designed for? The TS16-ER-AG60 WMP32G insert is designed primarily for machining stainless steel, specified by its material group M rating and the WMP32G grade. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating on the WMP32G grade reduces abrasive wear and improves thermal resistance, which helps the insert maintain a sharp cutting edge and consistent performance during prolonged turning operations. What role does the ER-AG60 chipbreaker play? The ER-AG60 chipbreaker provides controlled chip formation for medium to robust cuts, improving chip evacuation and reducing the risk of built-up edge during stainless steel machining. Is this insert compatible with standard TS16 holder systems? Yes, the ISO designation TS16-ER-AG60 WMP32G indicates compatibility with toolholders designed for TS16-style indexable turning inserts; confirm holder specifications before use. Where can one get application support for cutting parameters? Application support and parameter recommendations for the TS16-ER-AG60 WMP32G can be obtained from Metav Werkzeuge, who can advise on feed, speed and coolant strategies for stainless steel machining. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and brand names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanation. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
TS16-ER-AG60-F5 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WMP32G grade for reliable machining of stainless steel under medium to robust conditions; the result is stable chip formation and consistent cutting-edge life. Order the TS16-ER-AG60-F5 WMP32G via Metav Werkzeuge or consult the team for material-specific advice. TS16-ER-AG60-F5 WMP32G indexable turning insert by Walter Tools — Tiger‑tec Gold for stainless steel A TS16-ER-AG60-F5 WMP32G indexable turning insert designed for reliable performance when machining stainless steel in medium to robust operating conditions. Tiger‑tec Gold coating for high wear resistance WMP32G grade optimised for stainless steel Stable chip formation for secure cutting edges Suitable for medium to robust cutting conditions Consistent cutting performance for stainless steel The Tiger‑tec Gold coating combined with the WMP32G grade delivers a coated carbide substrate engineered to resist wear and to maintain a stable cutting edge when machining stainless steel. This chemistry and coating technology reduce the tendency for built‑up edge and thermal softening at the cutting zone, which in turn supports longer intervals between index changes and steadier component quality. For production environments where repeatability matters, the material pairing helps to lower rejects and stabilise cycle times. Efficiency and process reliability in turning operations The insert features the ER‑AG60‑F5 chipbreaker geometry that promotes controlled chip formation and evacuation under tougher cutting conditions. Controlled chips reduce downtime caused by chip entanglement and improve surface finish consistency, which supports higher process reliability and predictable tool life. In logical terms, improved chip control and edge stability translate into fewer tool changes and a more cost‑effective machining cycle for stainless steel components. Application fit and handling guidance Designed for the ISO group M (stainless steels), this insert suits a range of tasks from finishing to more robust turning operations where material ductility and heat generation present a challenge. The insert’s designation indicates its geometry and chipbreaker style, ensuring compatibility with standard turning toolholders sized for TS16 inserts. For best results, match cutting conditions and coolant strategy to the component material and toolholder rigidity; if clarification is required, technical advice is available to align machining parameters with production goals. The result is efficient material removal and consistent surface integrity. For machining stainless steel with confidence, select the Walter Tools TS16-ER-AG60-F5 WMP32G — contact Metav Werkzeuge for availability and tailored process recommendations at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical details SKU: TS16-ER-AG60-F5-WMP32G-WALTER Product: indexable turning insert Designation: TS16-ER-AG60-F5 WMP32G Series: Tiger‑tec Gold Manufacturer: Walter Tools Core data Grade: WMP32G Material group: M (stainless steel) Substrate: coated carbide Chipbreaker: ER‑AG60‑F5 Application: medium to robust conditions Special features Tiger‑tec Gold coating Stable chip formation Optimised cutting edge stability Suitable for stainless steel machining FAQ What materials is this insert designed for? The TS16-ER-AG60-F5 WMP32G insert is optimised for stainless steel (ISO group M) and performs best under medium to robust cutting conditions. What does WMP32G indicate? WMP32G denotes the Walter Tools grade within the Tiger‑tec Gold family; it is a coated carbide formulation designed for wear resistance and stable cutting edges when machining stainless steels. How does the ER‑AG60‑F5 chipbreaker help in practice? The ER‑AG60‑F5 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of chip snarling and improving surface finish consistency in turning operations. Is this insert compatible with standard TS16 toolholders? Yes, the TS16 designation specifies the insert geometry and fits toolholders designed for TS16 turning inserts; check the holder’s clamping style and seat geometry for correct interchange. Manufacturer: Walter Tools; Walter AG, Tübingen, Germany; www.walter-tools.com Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used for identification and explanation only. There is no affiliation between Metav Werkzeuge and the mentioned brands beyond the distribution of original, factory‑new products. The offered item is an original, brand‑new product from the manufacturer.
TS16-ER-AG60-M5 WMP32G Wendeplatten - Walter Tools
Combining the durability of the Tiger·tec Gold coating with the WMP32G grade and the ER‑AG60‑M5 chipbreaker, this insert delivers stable cutting edges and reliable chip control when machining stainless steel. Order the TS16‑ER‑AG60‑M5 WMP32G directly via Metav Werkzeuge or consult our technical advisers for application support. TS16-ER-AG60-M5 WMP32G — Indexable turning insert, Tiger·tec Gold (Walter Tools) The TS16-ER-AG60-M5 WMP32G is an indexable turning insert engineered for turning stainless steel under medium to robust cutting conditions, offering consistent chip formation and extended edge life. Tiger·tec Gold coating for extended tool life Optimised chip control for stainless steel machining Coated carbide grade WMP32G for robust performance Predictable performance in stainless steel turning The combination of the Tiger·tec Gold coating and the WMP32G carbide grade is engineered to address the typical challenges of machining stainless steel, such as work hardening and a tendency to form built-up edges. The specialised surface treatment reduces friction at the cutting zone and supports a stable cutting edge, which results in steadier cutting forces and improved process stability. For production environments where repeatable component quality matters, this solution reduces the frequency of tool changes and contributes to consistent dimensional and surface-finish results. Longer tool life and fewer interruptions to production With the ER‑AG60‑M5 chipbreaker geometry, the insert promotes controlled chip formation and efficient evacuation in tough stainless applications. The result is a lower risk of chip entanglement and fewer unscheduled stops, translating into measurable productivity gains. Highlighting the rational benefits, improved edge retention and predictable wear behaviour support higher throughput and lower tooling costs per part. The coated carbide construction further enhances resistance to abrasive and adhesive wear, delivering reliable performance across batch and continuous turning operations. Practical integration into workshop rigs and toolholders Designated by the ISO-style name TS16‑ER‑AG60‑M5 WMP32G, the insert interfaces with common indexable holder systems for turning and is suitable for use in mixed-production shops and specialised stainless steel lines. The ER‑AG60‑M5 chipbreaker is optimised for medium to heavy cuts where robust chip control is required. Operators and process engineers benefit from a solution that balances cutting security with handling simplicity: inserts are indexable for fast renewal of the cutting edge, supporting shorter setup times and improved overall equipment effectiveness. For application-specific recommendations on the Walter Tools Tiger·tec Gold WMP32G insert or to discuss compatibility with existing holders, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS16-ER-AG60-M5-WMP32G-WALTER Description: Drehwendeschneidplatte TS16-ER-AG60-M5 WMP32G Manufacturer: Walter Tools ISO designation: TS16-ER-AG60-M5 WMP32G Facts Grade: WMP32G Material group: M (stainless steel application) Chipbreaker: ER-AG60-M5 Series: Tiger·tec Gold Special features Coated carbide (Tiger·tec Gold technology) Optimised chip control for stainless steel Indexable turning insert type Suitable for medium to robust turning conditions FAQ What materials is this insert suited for? The TS16‑ER‑AG60‑M5 WMP32G insert from Walter Tools is specifically suited for machining stainless steel and is optimised to manage the associated heat and chip‑forming behaviour. What does the WMP32G grade and Tiger·tec Gold series offer? The WMP32G grade, as part of the Tiger·tec Gold series, combines a coated carbide formulation with a surface technology designed for improved edge life and reduced friction when turning stainless steel. How does the ER‑AG60‑M5 chipbreaker affect machining? The ER‑AG60‑M5 chipbreaker on the TS16‑ER‑AG60‑M5 supports controlled chip formation and efficient evacuation, which helps maintain process stability and lowers the risk of chip-related interruptions. Is this insert suitable for heavy-duty turning operations? The Walter Tools TS16‑ER‑AG60‑M5 WMP32G is intended for medium to robust cutting conditions; suitability for very heavy-duty turning should be evaluated against specific cutting parameters and machine capabilities. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is part of the Sandvik group and is recognised as a leading manufacturer of precision metal‑cutting tools. Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the brands named. The offered item is an original, factory‑new product of the manufacturer.
TS16-ER-G55 WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from a combination of Tiger·tec Gold coating and the WMP32G grade for predictable, durable performance when machining stainless steels; the optimised ER‑G55 chipbreaker supports stable chip control and consistent surface quality. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TS16-ER-G55 WMP32G — Indexable turning insert, coated carbide for stainless steel (Walter Tools) The TS16-ER-G55 WMP32G is a coated carbide indexable turning insert designed for secure, repeatable machining of stainless steel in medium to robust cutting conditions. Tiger·tec Gold coating for extended tool life ER‑G55 chipbreaker for stable chip control WMP32G grade optimised for stainless steels Reliable performance under medium to robust cuts Longer tool life through advanced coating technology The combination of the Tiger·tec Gold coating and the WMP32G grade provides a measurable extension of tool life when turning stainless steel. The coating reduces friction and thermal load at the cutting edge, which in turn minimises edge wear and the tendency for built-up edge formation. For production environments where component consistency matters, this results in fewer tool changes, reduced variance in surface finish and lower overall tooling costs. The benefit is a more predictable machining cycle and less unplanned downtime. Stable chip control that protects the process An optimised ER‑G55 chipbreaker promotes orderly, short chips and enhances repassable machining, which is particularly valuable when working with tough, strain-hardening stainless alloys. Improved chip control reduces the risk of chip entanglement and machine interruptions, leading to higher machine availability and safer handling. The more consistent chips also support a better surface condition on the workpiece, reducing follow-up finishing operations and increasing first-pass yield. Practical integration into turning operations for consistent results The TS16‑ER‑G55 geometry is engineered to fit standard toolholders for indexable turning and to deliver repeatable edge stability under a range of cutting parameters. As an indexable turning insert, it is suitable for shops looking to balance productivity and tool life in demanding stainless-steel applications. Walter Tools’ engineering focus on process security and a stable cutting edge supports predictable results across batch production and single-piece flows, helping to standardise setups and reduce operator adjustments. For machining stainless steels with Tiger·tec Gold reliability, contact Metav Werkzeuge for availability and application advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: TS16-ER-G55-WMP32G-WALTER Designation: TS16-ER-G55 WMP32G Product type: Indexable turning insert Facts Grade group: WMP32G Material group: M (suitable for stainless steel, ISO M) Chipbreaker: ER‑G55 Special features Coating technology: Tiger·tec Gold Base material: Coated carbide Suitable application: stainless steel machining Series: Tiger‑tec Gold Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The TS16‑ER‑G55 WMP32G indexable turning insert is formulated for stainless steel (ISO M) and performs reliably under medium to robust cutting conditions. How does the ER‑G55 chipbreaker improve production? The ER‑G55 chipbreaker produces controlled, short chips that reduce interruptions and enhance surface quality when machining stainless steels with the TS16‑ER‑G55 insert. Is the Tiger·tec Gold coating beneficial for high-temperature cutting? Yes, the Tiger·tec Gold coating lowers friction and thermal load at the cutting edge, which helps to reduce wear and extend tool life in demanding stainless‑steel applications. Which toolholders are compatible with this insert? The insert is compatible with standard toolholders designed for TS16‑ER‑G55 geometry; confirm holder specification matches the TS16‑ER‑G55 designation before assembly. Can this insert be used for fine finishing as well as roughing? The WMP32G grade provides a balance of edge stability and wear resistance suitable for both medium roughing and finishing passes in stainless‑steel machining, depending on cutting data and machine rigidity. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. They are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The item offered is original, factory-new goods of the manufacturer.
TS16-ER-G55-F5 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold performance and the WMP32G grade for secure chip formation and extended tool life when turning rostfreier Stahl; order this insert through Metav Werkzeuge or consult our specialists for application support. TS16-ER-G55-F5 WMP32G — Indexable turning insert for rostfreier Stahl (Tiger·tec Gold) — Walter Tools The TS16-ER-G55-F5 WMP32G is a precision indexable turning insert designed to deliver consistent cutting performance in rostfreier Stahl, combining a Tiger·tec Gold coating with an ER-G55-F5 chipbreaker for stable machining under medium to robust conditions. Tiger·tec Gold coated for high wear resistance Optimised chip control with ER-G55-F5 breaker Specifically for rostfreier Stahl (ISO group M) Stable cutting edge for consistent productivity Achieve longer tool life and reliable cutting under challenging conditions The combination of a coated carbide substrate and the Tiger·tec Gold technology provides improved wear resistance and edge stability in demanding turning operations. This grade, WMP32G, is tailored to handle the heat and adhesion tendencies typical of rostfreier Stahl; as a result, built-up edge formation is reduced and tool life is extended. The design supports consistent cutting forces and helps to decrease unscheduled interruptions, which contributes directly to higher machine utilisation and predictable production output. Consistent chip control that protects surface finish and downstream processes The integrated ER-G55-F5 chipbreaker promotes secure chip formation, lowering the risk of long, entangling swarf that can impair surface quality or damage parts and fixtures. For components requiring repeatable surface integrity, the insert’s chip management enhances process stability and reduces the frequency of manual intervention. The technical layout of the insert supports a balance between shear and ploughing action, which helps to maintain a steady surface finish while enabling reliable material removal rates in stainless steel machining. Simple procurement and predictable integration into production The insert’s ISO-style designation simplifies compatibility checks with existing toolholders and standard turning systems; the recognised geometry ensures straightforward replacement and consistent clamping. In production environments where uptime and repeatability matter, choosing a coated grade that emphasises stable cutting edges reduces the need for frequent requalification. For assistance on matching the insert to a specific holder or application scenario, Metav Werkzeuge can provide application-oriented advice and technical data to support an informed selection. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts; call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss suitability and availability Technical data SKU: TS16-ER-G55-F5-WMP32G-WALTER Product: Indexable turning insert, TS16-ER-G55-F5 WMP32G Brand: Walter Tools Facts Grade: WMP32G Series: Tiger·tec Gold Material group: M (rostfreie Stähle) ISO designation: TS16-ER-G55-F5 WMP32G Special features Coated carbide (Tiger·tec Gold) Chipbreaker: ER-G55-F5 Intended application: machining rostfreier Stahl Designed for medium to robust cutting conditions FAQ What materials is this insert suited for? The TS16-ER-G55-F5 WMP32G insert is specified for rostfreier Stahl (ISO group M) and performs well where high ductility and thermal sensitivity demand a grade that supports secure chip formation. What advantages does the WMP32G grade offer? WMP32G, part of the Tiger·tec Gold family, provides enhanced wear resistance and edge stability for stainless steel turning, helping to reduce built-up edge and to extend effective tool life. How does the ER-G55-F5 chipbreaker affect machining? The ER-G55-F5 chipbreaker promotes controlled fragmentation of chips, which improves swarf handling, protects workpiece surfaces and contributes to steady, repeatable machining results. Is this insert suitable for robust cutting conditions? Yes. The insert is designed for medium to robust applications in rostfreier Stahl, offering a balance between toughness and wear resistance to handle demanding turning operations. How to ensure compatibility with existing toolholders? Check the ISO designation TS16-ER-G55-F5 WMP32G against the holder geometry and seat type; for specific matching advice, consult technical documentation or the advisory services at Metav Werkzeuge. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, factory-new goods from the manufacturer Walter Tools.
TS16-ER-G60 WMP22G WMP22G Wendeplatten - Walter Tools
Efficient and reliable turning of stainless steel is achieved by combining the Tiger·tec Gold coating, the WMP22G coated-carbide grade and the ER‑G60 chipbreaker for controlled chips and extended tool life; order the insert directly via Metav Werkzeuge or ask their consultants for grade and application advice. TS16-ER-G60 WMP22G indexable turning insert – for stainless steel (Walter Tools) A compact TS16-ER-G60 WMP22G indexable turning insert designed for medium to robust turning operations in stainless steel, offering stable chip control and long wear life. Tiger·tec Gold coating for long tool life WMP22G coated carbide grade for stainless steel ER‑G60 chipbreaker for stable chip control Consistent edge stability under medium to heavy cuts Predictable performance for demanding stainless-steel turning The Tiger·tec Gold coating together with the WMP22G grade offers a balance of wear resistance and toughness that is particularly suited to the challenges of machining stainless steel. The combination reduces the tendency for built-up edge and supports stable chip formation, which in turn preserves the cutting edge and improves process reliability. This results in fewer tool changes and more consistent production cycles when machining parts that demand repeatable surface quality. Why the chipbreaker and substrate matter for process security The ER‑G60 chipbreaker is engineered to produce short, controllable chips under medium to heavy cutting conditions, which lowers the risk of entanglement and improves swarf handling in automated and manual turning centres. Coupled with a coated carbide substrate, the geometry and coating work together to manage heat at the cutting zone and maintain edge stability during extended runs. For manufacturers aiming to reduce downtime, these features translate into steadier cycle times and fewer interruptions. Real benefits on the shop floor and for production planning In practice, the insert delivers measurable advantages: improved repeatability in surface finish and dimensional stability, and reduced tool wear variance across batches. The design supports versatile use in series production and job-shop environments where stainless-steel components are common. Selection of the correct grade and chipbreaker helps to achieve predictable tool life and cost-efficiency per component. For complex applications, material-specific planning with matched cutting data will further enhance productivity and part quality. For application guidance and supply, contact Metav Werkzeuge to discuss the Walter Tools TS16-ER-G60 WMP22G insert and compatible holders — Metav Werkzeuge can advise on grade selection and delivery options, reachable at info@metav-werkzeuge.com or +49 2822 7131930. Technical data SKU: TS16-ER-G60-WMP22G-WALTER Product: Indexable turning insert TS16-ER-G60 WMP22G Manufacturer: Walter Tools Core data Grade: WMP22G Series: Tiger·tec Gold Chipbreaker: ER‑G60 Substrate: Coated carbide Material group: M (stainless steel) Special features Suitable for stainless steel (M), medium to robust conditions Stable chip formation and edge stability Optimised to reduce built-up edge and extend tool life Designed for consistent production results FAQ What materials is this insert intended for? The TS16-ER-G60 WMP22G indexable turning insert from Walter Tools is intended primarily for machining stainless steel (material group M) under medium to robust cutting conditions. What does the Tiger·tec Gold series deliver in everyday use? Tiger·tec Gold provides a high-performance coating that enhances thermal resistance and wear resistance of the WMP22G grade, improving tool life and consistency in stainless-steel turning. How does the ER‑G60 chipbreaker affect chip behaviour? The ER‑G60 geometry promotes short, controlled chips for reliable swarf management and reduced risk of chip-related interruptions during turning operations. Is the WMP22G grade a coated or uncoated substrate? WMP22G is a coated carbide grade within the Tiger·tec Gold family, combining a robust substrate with a protective, performance-oriented coating. Which production benefits can be expected when switching to this insert? Switching to the TS16-ER-G60 WMP22G can lead to more consistent surface quality, longer tool life per edge and improved process reliability in series production of stainless-steel components. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, factory-new merchandise from the manufacturer (Walter Tools).
TS16-ER-G60 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold performance and the WMP32G grade for reliable stainless-steel turning, combining consistent chip control and extended tool life for stable production. Order directly via Metav Werkzeuge or consult our specialists for process matching. TS16-ER-G60 WMP32G — Turning indexable insert, Tiger·tec Gold for stainless steel (Walter Tools) The TS16-ER-G60 WMP32G is a turning indexable insert optimised for machining stainless steels, offering stable chip formation and enhanced wear resistance in medium to robust conditions Tiger·tec Gold coating for longer tool life WMP32G grade tailored for stainless steels ER-G60 chipbreaker for stable chip control Reliable Walter Tools quality and consistency Increased productivity for stainless-steel turning The combination of the Tiger·tec Gold coating and the WMP32G grade gives a clear performance advantage when machining stainless steels. The coated carbide substrate reduces adhesion and softening at elevated temperatures, which means fewer interruptions for tool changes and a more predictable process. As a result, cycle times can be shortened under comparable cutting conditions while maintaining component integrity. This benefit is particularly relevant in batch production and contract machining where repeatability and uptime are decisive. Predictable chip control and improved surface quality The ER-G60 chipbreaker is engineered to produce manageable chips and reduce the risk of built-up edge, a common challenge with tough, work-hardening stainless-steel grades. Improved chip formation leads directly to a more consistent tool–workpiece interaction and a finer surface finish on turned components. In practical terms, stable chip control reduces machine downtime and eases swarf handling, contributing to a safer, cleaner shopfloor and fewer downstream operations to correct surface imperfections. Durable cutting edge and economical machining Optimised for medium to robust cutting conditions, this indexable insert combines a stable cutting edge geometry with the wear-resistant properties of its coating to extend tool life and lower tooling cost per part. The grade supports predictable wear patterns, which simplifies process planning and tool-change schedules. Integration into existing toolholder systems is straightforward because the TS16-ER-G60 designation follows standard insert geometry conventions, allowing quick adoption without special adapters. The result is a pragmatic balance of performance and economy for production environments. For high-process reliability with Tiger·tec Gold performance, contact Metav Werkzeuge for tailored technical advice and prompt supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: TS16-ER-G60-WMP32G-WALTER Article: TS16-ER-G60 WMP32G Product type: Turning indexable insert Brand: Walter Tools Series: Tiger·tec Gold Core data Grade: WMP32G Chipbreaker: ER-G60 Material designation: M (stainless steels) Material base: Coated carbide Special features Coating: Tiger·tec Gold (coated carbide) Application: stainless steels Stable chip formation Optimised cutting-edge stability FAQ Is the TS16-ER-G60 WMP32G suitable for machining austenitic stainless steels? Yes. The TS16-ER-G60 WMP32G insert from Walter Tools is specified for the material group M and is designed to handle the toughness and tendency to work harden typically found in austenitic stainless steels. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WMP32G grade improves thermal resistance and reduces adhesion, which enhances wear behaviour and contributes to longer tool life during stainless-steel turning. Which cutting conditions are recommended for the ER-G60 chipbreaker? The ER-G60 chipbreaker is aimed at medium to robust cutting conditions where reliable chip control and prevention of built-up edge are priorities; it performs well in common roughing and semi-finishing passes. Can the insert be used for finishing operations? Yes. With appropriate feeds and speeds and the ER-G60 geometry, the insert can deliver good surface quality for finishing passes while maintaining edge stability. Is the TS16-ER-G60 WMP32G compatible with standard toolholders? Yes. The TS16-ER-G60 designation follows standard insert geometry conventions and is compatible with matching toolholders for indexable turning inserts. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TS16-ER-G60-F5 WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WMP32G grade for reliable machining of rostfreier Stahl; the ER‑G60‑F5 chipbreaker ensures controlled chip formation and consistent surface quality. Order the TS16-ER-G60-F5 WMP32G directly via Metav Werkzeuge or ask our consultants if needed. TS16-ER-G60-F5 WMP32G — Indexable insert for rostfreier Stahl (Tiger·tec Gold, ER‑G60‑F5) by Walter Tools The TS16-ER-G60-F5 WMP32G is an indexable insert designed for robust turning of rostfreier Stahl, combining Tiger·tec Gold coating with an ER‑G60‑F5 chipbreaker to support stable cutting and secure chip evacuation. Tiger·tec Gold coating for longer tool life WMP32G grade optimised for rostfreier Stahl ER‑G60‑F5 chipbreaker for stable chip control Consistent edge reliability from Walter Tools High process reliability for rostfreier Stahl turning The insert is based on the WMP32G carbide grade within the Tiger·tec Gold family, offering a balanced combination of wear resistance and toughness tailored to the demands of rostfreier Stahl. In practice, this means fewer tool changes and more consistent part quality under variable cutting conditions. The coated carbide construction reduces built-up edge and thermal degradation, which supports predictable tool life and contributes to stable production cycles. Improved chip control and surface consistency Equipped with the ER‑G60‑F5 chipbreaker, the geometry directs chips away from the cutting zone, reducing the risk of entanglement and improving surface finish. For operators less familiar with chipbreaker nomenclature: the chipbreaker modifies the local flow of the swarf to produce short, controllable chips even when machining ductile or gummy rostfreier Stahl. The result is reduced secondary operations and lower scrap rates, with a direct improvement in throughput and process reproducibility. Durable coating and economic operation The Tiger·tec Gold technology combines a modern multilayer coating with optimised substrate properties to handle the heat and adhesion tendencies of rostfreier Stahl. This coated carbide solution delays flank wear and maintains edge geometry over extended cutting periods, translating into lower tooling cost per part. For businesses focused on efficiency, the insert supports continuous production and reduces maintenance intervals, aligning with industrial goals of predictable output and lower unit costs. Practical use and compatibility in production The insert suits a range of turning applications where rostfreier Stahl is present, from finishing to medium turning when parameters are chosen accordingly. The component integrates with standard toolholders that accept the TS16 form and benefits from Walter Tools' dimensional stability and quality control. For shops seeking improved process control, the insert offers a straightforward upgrade path: swap to the WMP32G grade and adjust feeds to exploit the chipbreaker geometry for optimal results. Contact Metav Werkzeuge for tailored advice on integrating Walter Tools' TS16-ER-G60-F5 WMP32G into existing turning operations, or request machining recommendations and parameter sheets via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TS16-ER-G60-F5-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-ER-G60-F5 WMP32G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Series: Tiger·tec Gold Grade: WMP32G ISO designation: TS16-ER-G60-F5 WMP32G Key classifications Application group: M (rostfreier Stahl) Chipbreaker: ER‑G60‑F5 Material code: M Series code: Tiger·tec Gold Features & compatibility Coating and substrate: Tiger·tec Gold, coated carbide Suitable for: rostfreier Stahl Grade designation: WMP32G Intended use: turning with controlled chip formation FAQ What materials is this insert suited for? The TS16-ER-G60-F5 WMP32G is designed primarily for machining rostfreier Stahl and performs best where secure chip formation and heat resistance are required. How does the ER‑G60‑F5 chipbreaker affect machining? The ER‑G60‑F5 chipbreaker on the Walter Tools insert shapes chips to be short and controllable, improving surface finish and reducing the risk of swarf issues during rostfreier Stahl turning. Is the WMP32G grade coated or uncoated? WMP32G is a coated carbide grade (Tiger·tec Gold technology) that combines wear resistance and toughness for extended tool life when cutting rostfreier Stahl. Can the insert be used for roughing and finishing? The insert is suitable for a range of turning operations; adjust cutting parameters to match the intended operation—higher feeds for tougher cuts, finer feeds for finishing—while benefiting from stable chip control. Does Walter Tools provide data for cutting parameters? Walter Tools supplies recommended parameters for the WMP32G grade and ER‑G60‑F5 geometry; for shop-specific optimisation the TS16-ER-G60-F5 WMP32G can be matched to tooling systems and machining conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-ER0.5ISO WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WMP32G grade for dependable chip control and wear resistance in rostfreier Stahl turning; the ER0.5ISO chipbreaker supports predictable chip formation and process stability. Order the insert directly via Metav Werkzeuge or consult our team for application advice. TS16-ER0.5ISO ER0.5ISO WMP32G indexable turning insert for rostfreier Stahl by Walter Tools The TS16-ER0.5ISO WMP32G is a coated carbide indexable insert from the Tiger‑tec Gold range, developed for consistent performance when turning rostfreier Stahl under medium to robust conditions. Tiger‑tec Gold coating for enhanced wear resistance WMP32G grade for rostfreier Stahl applications ER0.5ISO chipbreaker for controlled chip formation Stable cutting edge for repeatable performance Greater process reliability through optimised coating technology The Tiger‑tec Gold technology delivers a coated carbide surface engineered to reduce flank wear and extend tool life during prolonged turning operations. By combining a wear‑resistant coating with the WMP32G grade, the insert provides stable cutting edge behaviour that lowers the risk of built‑up edge when machining rostfreier Stahl. This stability translates into fewer interruptions, more consistent surface quality and predictable tool change intervals, supporting higher machine utilisation in production environments. Controlled chip formation for safer, more efficient turning The ER0.5ISO chipbreaker is designed to produce short, manageable chips when cutting materials classified as group M under ISO 513, specifically rostfreier Stahl. Reliable chip control reduces the need for manual chip handling and minimises the chance of chip entanglement with rotating parts, improving operator safety and machining efficiency. The result is a smoother process with less downtime for chip clearing and reduced risk of surface damage to the workpiece. Material focus and application advantages for stainless applications Selected for its suitability on rostfreier Stahl, the WMP32G grade balances toughness and wear resistance to cope with the material’s tendency for work hardening and high thermal loading. The insert’s formulation supports secure chip formation and a consistent cutting edge under medium to robust machining conditions. For shops aiming to optimise turning of stainless components, this solution helps to maintain surface integrity while managing abrasive and adhesive wear mechanisms common to these alloys. Discuss specific cutting parameters or request an application recommendation from Metav Werkzeuge for the Walter Tools Tiger‑tec Gold WMP32G insert; contact via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS16-ER0.5ISO-WMP32G-WALTER Product name: TS16-ER0.5ISO WMP32G Series: Tiger‑tec Gold Facts Grade: WMP32G Chipbreaker: ER0.5ISO Material group: M (rostfreier Stahl) Special features Coated carbide (beschichtetes Hartmetall) Optimised for secure chip formation Suitable for rostfreier Stahl machining FAQ What materials is this insert designed to machine? The TS16-ER0.5ISO WMP32G insert is optimised for rostfreier Stahl (ISO group M) and performs well where secure chip formation and heat management are required. How does the Tiger‑tec Gold technology benefit tool life? Tiger‑tec Gold coating on the WMP32G grade reduces wear and provides a stable cutting edge, helping the insert maintain performance over longer runs. What is the purpose of the ER0.5ISO chipbreaker? The ER0.5ISO chipbreaker produces short, controlled chips during turning, improving safety and reducing the need for manual chip intervention when machining rostfreier Stahl. Can the insert handle medium to robust cutting conditions? Yes, the WMP32G grade in the Tiger‑tec Gold series is intended for medium to robust conditions, offering a compromise between toughness and wear resistance for consistent results. Is this insert suitable for automated production environments? With predictable chip control and a stable cutting edge, the TS16-ER0.5ISO WMP32G insert supports repeatable cycles and reduced process interruptions in automated machining cells. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
TS16-ER0.70ISO WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WMP32G grade and the ER0.70ISO chipbreaker for dependable machining of stainless steel; order directly via Metav Werkzeuge or contact our consultants for cutting data and application support. TS16-ER0.70ISO WMP32G — Indexable turning insert, Tiger·tec Gold, Walter Tools The TS16-ER0.70ISO WMP32G is an indexable turning insert designed for secure, productive machining in stainless steel under medium to robust cutting conditions Tiger·tec Gold coating for high wear resistance Optimised for stainless steel (ISO group M) ER0.70ISO chipbreaker for stable chip control Coated cemented carbide for extended tool life Increased productivity when machining stainless steel The combination of the WMP32G grade with Tiger·tec Gold coating addresses typical challenges of stainless steel such as toughness and built-up edge. The grade is a coated cemented carbide engineered to support secure chip formation and to maintain a sharp cutting edge under elevated temperatures. This results in fewer interruptions for tool changes and a more consistent component finish. For production environments seeking repeatable cycle times, the engineered interaction between grade and coating helps to reduce unplanned downtime and supports higher throughput. Stable chip control for process security and surface quality The ER0.70ISO chipbreaker geometry is designed to produce short, controllable chips in turning operations on stainless steel. By promoting stable chip formation, the chipbreaker reduces the risk of entanglement and improves coolant access at the cutting zone, which in turn supports a consistent surface quality. The insert’s micro-geometry and coating together contribute to improved flank and crater wear behaviour, allowing for longer tool engagement and fewer regrinds. For operators, this means less manual intervention and a steadier production rhythm. Practical integration and application benefits This insert is suitable for medium to robust turning tasks where reliable performance on stainless steel is required. The insert’s geometry and grade make it a good match for general turning toolholders that accept the TS16 designation. Selecting the correct insert grade and chipbreaker can shorten set-up times and simplify inventory by standardising on a robust solution for stainless steel components. For users less familiar with fine-tuning cutting parameters, a short trial cut under shop conditions will quickly demonstrate improvements in process stability and tool life. Contact Metav Werkzeuge for tailored advice on Walter Tools Tiger·tec Gold inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for cutting data and application recommendations Technical Data SKU: TS16-ER0.70ISO-WMP32G-WALTER Article name: Drehwendeschneidplatte TS16-ER0.70ISO WMP32G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Facts Chipbreaker: ER0.70ISO Material group: M (stainless steels) Grade: WMP32G Series: Tiger·tec Gold Special features Coating technology: Tiger·tec Gold (coated cemented carbide) Application: stainless steel, medium to robust conditions Benefit: stable chip formation and optimised chipformer Geometry designation: TS16 FAQ Is the insert suitable for stainless steel? The TS16-ER0.70ISO WMP32G from Walter Tools is optimised for stainless steel and designed to handle the material group M under medium to robust conditions. What advantage does the ER0.70ISO chipbreaker offer? The ER0.70ISO chipbreaker provides short, controllable chips and improved coolant action, enhancing process stability and surface finish when machining stainless steel with the WMP32G grade. Which coating and substrate are used on this grade? The insert uses the Tiger·tec Gold coating on a coated cemented carbide substrate, delivering higher wear resistance and reliable cutting-edge stability in demanding stainless steel applications. Will this insert extend tool life compared with standard uncoated grades? Yes, the combination of the WMP32G grade and Tiger·tec Gold coating is formulated to resist wear and reduce built-up edge, which generally leads to longer tool life and fewer tool changes in stainless steel machining. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
TS16-ER0.75ISO WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G carbide grade for secure chip formation and extended tool life when machining stainless steel; order the TS16-ER0.75ISO WMP32G indexable insert directly via Metav Werkzeuge or consult our technical advisers for process optimisation. TS16-ER0.75ISO WMP32G indexable turning insert — Tiger·tec Gold for stainless steel (Walter Tools) A TS16-ER0.75ISO WMP32G indexable turning insert engineered for stable cutting and reliable chip control in the machining of stainless steels under medium to robust conditions Tiger·tec Gold coating for long tool life Optimised for stainless steel machining Stable chip formation under robust loads Coated carbide grade WMP32G for repeatability Secure chip control for stainless steel turning The TS16-ER0.75ISO WMP32G insert combines the Tiger·tec Gold coating with the WMP32G coated carbide grade to address common challenges when machining stainless steel, such as work hardening and built-up edge. The coating improves thermal resistance while the substrate maintains a stable cutting edge, which reduces the frequency of edge changes and supports a consistent surface finish. This results in fewer process interruptions and more predictable cycle times on demanding components. Measurable productivity and lower cost per part Designed to extend service intervals, this insert contributes to higher overall productivity by maintaining performance over longer tool life and allowing sustained cutting parameters. The combination of coating and grade promotes reliable wear behaviour, leading to more parts produced per insert and improved machine uptime. For production runs where process stability and reproducible results matter, the insert reduces the operational overhead associated with frequent tool changes. Geometry and chipbreaker engineered for robustness The ER0.75ISO chipbreaker provides controlled chip formation tailored to the specific demands of stainless steels and is compatible with ISO-based toolholder systems. By promoting predictable chip evacuation and minimising serration or stringing, the chipbreaker helps avoid interruptions caused by poor chip flow. Conforming to material group M under ISO 513, the geometry supports safe cutting under medium to robust conditions while simplifying set-up and cycle programming. Applications, material guidance and process support Best suited for components manufactured from stainless steel where a balance of edge stability and thermal resistance is required, this insert performs well in operations that demand repeatable surface quality and reliable tool life. Typical uses include medium-depth turning and general finishing passes where secure chip control is essential. For tailored feeds, speeds and holder recommendations, technical assistance is available to align cutting data with production goals. For ordering and application advice on the TS16-ER0.75ISO WMP32G from Walter Tools, contact Metav Werkzeuge for detailed process support and procurement at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: TS16-ER0.75ISO-WMP32G-WALTER Product type: indexable turning insert Designation: TS16-ER0.75ISO WMP32G Facts Chipbreaker: ER0.75ISO Material group suitability: M (stainless steel) Series: Tiger·tec Gold Special features Coated carbide grade WMP32G Engineered for stable chip formation Intended for machining stainless steel Manufacturer: Walter Tools FAQ What stainless steels is this insert suitable for? The TS16-ER0.75ISO WMP32G is aimed at stainless steels classified in material group M (ISO 513), including austenitic grades that require secure chip control and thermal resistance. How does the Tiger·tec Gold coating benefit performance? Tiger·tec Gold on the WMP32G grade enhances thermal stability and wear resistance for the insert, helping to maintain the cutting edge during continuous stainless steel turning operations. What is the role of the ER0.75ISO chipbreaker? The ER0.75ISO chipbreaker is designed to produce controlled chips and reliable evacuation under medium to robust cutting conditions, reducing the risk of workpiece damage and machine stoppages. Can the insert be used in standard ISO holders? Yes, the TS16-ER0.75ISO WMP32G follows ISO-related designations and is intended for use with compatible indexable turning holders that accept the TS16-style insert form. Where can one obtain cutting data for this insert? Cutting recommendations and process parameters for the TS16-ER0.75ISO WMP32G are available from Metav Werkzeuge and can be supplied to match specific stainless steel grades and machining conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only and do not indicate any affiliation between our company and the trademark holders. The offered article is original, factory-new merchandise from the specified manufacturer.
TS16-ER0.8ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating, the WMP32G grade optimised for rostfreier Stahl and the ER0.8ISO chipbreaker for reliable chip control and stable cutting performance; order the insert directly via Metav Werkzeuge or consult our application specialists for process integration. TS16-ER0.8ISO WMP32G indexable turning insert for rostfreier Stahl (Tiger·tec Gold) by Walter Tools The TS16-ER0.8ISO WMP32G is an indexable turning insert designed for secure machining of rostfreier Stahl, combining a coated carbide grade with a dedicated chipbreaker for medium to robust turning operations. Tiger‑tec Gold coating for extended life WMP32G grade optimised for rostfreier Stahl ER0.8ISO chipbreaker for stable chip control Robust edge stability under heavy conditions Higher throughput with proven coating technology The combination of Tiger·tec Gold and the WMP32G grade delivers a measurable advantage in everyday turning operations on rostfreier Stahl. The coated carbide composition supports stable cutting edges under the thermal and adhesive stresses typical of these alloys, reducing the frequency of edge failure. As a result, cycle times remain consistent and interruptions for tool change are minimised. The overall effect is a dependable improvement in machining efficiency and an increase in effective production time. Fewer tool changes, lower process cost By favouring a grade that is tailored to the demands of rostfreier Stahl, the insert achieves longer tool life under medium to robust conditions without sacrificing surface quality. The enhanced wear resistance means fewer interruptions on the machining centre and less handling in the workshop, which contributes to higher net productivity. This pragmatic performance profile is particularly beneficial for job shops and production lines that require repeatable results and reduced per‑component tooling expense. Predictable chip behaviour for safer turning The ER0.8ISO chipbreaker is engineered to produce controlled, breakable chips when machining sticky, work‑hardening alloys. Controlled chip formation reduces the risk of entanglement and flank damage, helps maintain coolant access to the cutting zone and supports consistent surface integrity. Explaining the chipbreaker function in plain terms: it influences how the metal curls and fractures, making swarf easier to evacuate and reducing the mechanical and thermal loads that can shorten tool life. Practical application and workflow integration In practical terms, the insert is suited to turning operations where rostfreier Stahl machining demands a balance between edge life and surface finish. It is applicable in serial production as well as in small‑batch precision work where process stability is crucial. The design is compatible with standard indexable turning toolholders that accept the TS16 size, enabling straightforward integration into existing toolsets while maintaining the operational benefits of the Tiger·tec Gold technology. For tailored cutting data, availability and advice on integrating the Tiger·tec Gold WMP32G inserts into current turning processes, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for direct consultancy and supply information. Technical data SKU: TS16-ER0.8ISO-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-ER0.8ISO WMP32G Walter Tools Product type: Drehwendeschneidplatte (indexable turning insert) Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER0.8ISO ISO designation: TS16-ER0.8ISO WMP32G Manufacturer: Walter Tools Core data Material group: M Suitable for: rostfreier Stahl Special features Coating: Tiger·tec Gold Carbide: coated carbide grade Application focus: rostfreier Stahl machining Sorteneinsatz: medium to robust cutting conditions Designed for stable chip formation and edge stability FAQ Which materials are best machined with this insert? The insert is optimised for rostfreier Stahl; the WMP32G grade and Tiger·tec Gold coating support secure chip formation and edge retention when turning stainless alloys. What role does the ER0.8ISO chipbreaker play? The ER0.8ISO chipbreaker controls chip form to reduce entanglement and improve evacuation, which helps preserve the cutting edge and maintain consistent surface quality. How does the Tiger·tec Gold coating benefit everyday production? Tiger·tec Gold enhances wear resistance and thermal stability, extending effective tool life and supporting repeatable machining results under the conditions common with rostfreier Stahl. Is the insert suitable for both finishing and medium roughing? Yes; the combination of grade and chipbreaker allows a balance between surface finish and robustness, making the insert adaptable across a range of turning operations. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, brand‑new goods from the manufacturer.
TS16-ER06RD WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold grade and the ER06RD chipbreaker to secure stable chip formation and consistent edge life in stainless steel turning; order or request advice through Metav Werkzeuge for swift, application-focused support. TS16-ER06RD WMP32G indexable turning insert — Tiger‑tec Gold for stainless steel (Walter Tools) A TS16-ER06RD WMP32G indexable turning insert engineered for reliable, medium to robust stainless steel machining with optimised chip control. Tiger‑tec Gold coated WMP32G ER06RD chipbreaker for stable chips Optimised for stainless steel (ISO M) Improved process reliability through coated‑grade performance The coated‑carbide WMP32G grade, part of the Tiger‑tec Gold family, is engineered to deliver stable chip formation and improved wear resistance when machining stainless steels. As a coated indexable insert, it combines a hard, wear‑resistant surface with a substrate that sustains cutting loads, so cutting edges remain reliable under the higher temperatures and adhesive tendencies typical for stainless steel. The net effect is fewer interruptions for insert changes and a more predictable production flow. Consistent chip control and edge security with ER06RD The integrated ER06RD chipbreaker promotes defined chip segmentation, reducing the risk of long, entangling swarf and minimising the chance of built‑up edge. Controlled chips help maintain a steady cutting force and reduce vibration, which supports surface finish consistency and extends effective tool life. For workshops seeking repeatable turning results, the combination of a dedicated chipbreaker and a coated carbide grade yields measurable gains in process stability. Application guidance for stainless steel turning Designed for ISO group M, the insert is intended for turning operations on stainless steel where material toughness and heat generation can challenge tool performance. The grade suits medium to robust cutting conditions and is particularly useful where secure chip forming and edge integrity are priorities. Selecting this insert will be beneficial in serial production or jobbing environments where downtime for tool change must be kept to a minimum and surface quality matters. Economic handling and reliable brand backing As an indexable insert, the component enables fast replacement and cost‑efficient tool management: only the insert is changed rather than the entire tool body, which reduces inventory costs and machine downtime. Backed by Walter Tools engineering, this insert provides consistent results and is compatible with standard tool holders that accept the TS16 form. The result is a practical, productivity‑oriented solution for demanding stainless steel applications. Discuss suitability and order options with Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to evaluate the Walter Tools TS16-ER06RD WMP32G for specific turning tasks Technical data Article number: TS16-ER06RD-WMP32G-WALTER SKU: TS16-ER06RD-WMP32G-WALTER Product type: indexable turning insert Series: Tiger‑tec Gold Grade: WMP32G Manufacturer: Walter Tools Facts ISO designation: TS16-ER06RD WMP32G Applicable material group: M (stainless steel) Chipbreaker: ER06RD Special features Coated carbide grade Tiger‑tec Gold coating technology Optimised for stable chip formation and edge life Suitable for medium to robust cutting conditions FAQ Which materials is this insert suitable for? The TS16-ER06RD WMP32G is specified for stainless steel (ISO group M) and is designed to manage the toughness and heat‑related behaviour of these alloys. What does the WMP32G grade provide? WMP32G is a coated carbide grade in the Tiger‑tec Gold range that balances wear resistance and edge security to maintain cutting performance in demanding stainless steel turning. How does the ER06RD chipbreaker help in practice? The ER06RD geometry promotes controlled chip segmentation, reducing swarf issues and supporting consistent cutting forces, which improves surface finish and reduces insert wear. Is this an original Walter Tools component? Yes, the item is offered as an original Walter Tools indexable turning insert with the TS16-ER06RD WMP32G designation. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only; no affiliation is implied. The offered article is original, brand‑new manufacturer's goods.
TS16-ER08ACME WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of a high-performance, coated carbide grade that combines Tiger·tec Gold technology with an ER08ACME chipbreaker to secure stable cutting when machining rostfreier Stahl; order the insert via Metav Werkzeuge or consult the team for specification advice. TS16-ER08ACME WMP32G indexable turning insert — Tiger·tec Gold for rostfreier Stahl by Walter Tools TS16-ER08ACME WMP32G is an indexable turning insert developed for robust machining of rostfreier Stahl under medium to heavy cutting conditions Tiger·tec Gold coating for stable cutting Optimised ER08ACME chip control Coated carbide grade WMP32G Designed for rostfreier Stahl machining Stable edge life and predictable process results The Tiger·tec Gold coating combined with the WMP32G grade provides consistent edge stability when working with rostfreier Stahl, a material group prone to work hardening and built-up edge formation. The coated carbide composition reduces adhesion to the cutting edge and supports secure chip formation, which in turn lowers the risk of unexpected tool wear. For production environments seeking repeatable part quality, this insert offers an engineered balance between wear resistance and toughness to keep cycle times steady and scrap rates low. Improved productivity through optimized chip control The ER08ACME chipbreaker is designed to break and evacuate chips efficiently during turning operations, reducing interruptions for chip clearing and minimising surface damage. Stable chip evacuation helps maintain consistent cutting forces, which benefits machine tool life and operator safety. By combining a proven chip geometry with the coated carbide WMP32G grade, the insert supports higher usable cutting parameters and more reliable machining windows, contributing directly to improved throughput and lower overall production cost per component. Application-focused grade for demanding stainless work Selected for its suitability for rostfreier Stahl applications, the WMP32G grade is aimed at medium to robust cutting conditions where heat generation and material toughness are significant factors. The insert’s design enables secure engagement at moderate feed rates without compromising surface finish. Where finishing and semi-finishing passes must meet narrow tolerances, this indexable solution helps maintain dimensional stability and repeatability over longer tool life intervals. For reliable machining of rostfreier Stahl with Walter Tools’ Tiger·tec Gold technology, choose the TS16-ER08ACME WMP32G insert and contact Metav Werkzeuge for ordering and technical assistance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TS16-ER08ACME-WMP32G-WALTER Product label: Drehwendeschneidplatte TS16-ER08ACME WMP32G Walter Tools Manufacturer: Walter Tools Data Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER08ACME Material group: M Special features Coating technology: Tiger·tec Gold Suitable for: rostfreier Stahl Designation: TS16-ER08ACME ISO designation: TS16-ER08ACME WMP32G UID: TS16-ER08ACME-WMP32G-WALTER FAQ Which materials is this insert intended for? The insert is specified for machining rostfreier Stahl; the WMP32G grade and Tiger·tec Gold technology are tuned to handle the toughness and heat sensitivity of those steels. What chipbreaker is fitted and what benefit does it bring? The ER08ACME chipbreaker provides reliable chip segmentation and evacuation, reducing interruptions and supporting consistent surface quality during turning. How does the Tiger·tec Gold series improve tool life? The Tiger·tec Gold coating enhances wear resistance and reduces edge adhesion on challenging materials, resulting in more predictable performance and longer service intervals. Is this insert suitable for medium and heavy cuts? Yes, the WMP32G grade is intended for medium to robust cutting conditions, offering the toughness required for such applications while maintaining good cutting edge stability. Walter Tools; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are mentioned exclusively for explanation and comparison. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
TS16-ER08NPT WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP32G grade optimised for stainless steels and the ER08NPT chipbreaker for secure chip control to maintain steady material removal and long tool life; order directly via Metav Werkzeuge or contact their consultants for application support. TS16-ER08NPT WMP32G indexable turning insert – Tiger·tec Gold coated, ER08NPT chipbreaker for stainless steel | Walter Tools TS16-ER08NPT WMP32G is an indexable turning insert designed for reliable machining of stainless steels under medium to robust conditions TS16-ER08NPT WMP32G indexable insert Tiger·tec Gold coating for extended tool life ER08NPT chipbreaker for stable chip control Optimised for machining stainless steel (M) Reliable cutting performance on stainless steels The insert combines the WMP32G grade with the Tiger·tec Gold coating to address the typical challenges of machining stainless steel: high ductility, tendency to form built-up edges and elevated heat at the cutting zone. The ER08NPT chipbreaker supports controlled chip formation, reducing interruptions and the risk of entanglement. This results in improved process stability and consistent surface finish while reducing the frequency of tool changes. The design is suitable for shops seeking reproducible throughput in demanding turning operations. Better process security and economy in production With a focus on reproducibility, the coated carbide grade and chipbreaker geometry provide stable cutting edges and predictable wear behaviour. These characteristics support higher tool life and minimise unscheduled downtime, which contributes to lower overall cost per component and better machine utilisation. The combination of coating technology and grade promotes efficient heat management and reliable chip evacuation, enabling smoother cycle times and fewer interventions on the machine. Practical application notes and fitting guidance The insert is intended for typical turning set-ups where stainless steels are the primary workpiece material. The chipbreaker geometry is optimised to guide swarf into manageable shapes for automatic extraction in both light and more robust cuts. For mounting, follow the toolholder manufacturer’s torque and clamping recommendations; the insert series is compatible with standard toolholders matching the TS16 designation. For tailor-made machining parameters and to confirm suitability for a specific stainless-steel grade, consult Metav Werkzeuge’s technical advisors or request the material pairing recommendations. Contact Metav Werkzeuge for bespoke application advice and fast supply of Walter Tools TS16-ER08NPT WMP32G indexable inserts Technical data SKU: TS16-ER08NPT-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-ER08NPT WMP32G Walter Tools Product type: Indexable turning insert Facts Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER08NPT Material group: M Special features Coated cemented carbide (Tiger·tec Gold) Designed for rostfreier Stahl machining Stable chip formation and secure edge behaviour Suitable for medium to robust machining conditions FAQ What materials is this insert suited for? The TS16-ER08NPT WMP32G insert is optimised for rostfreier Stahl (stainless steel) applications and performs well under medium to robust cutting conditions. How does the Tiger·tec Gold coating help in production? The Tiger·tec Gold coating on this Walter Tools insert enhances heat resistance and wear behaviour, extending tool life and improving process stability in turning operations. What role does the ER08NPT chipbreaker play? The ER08NPT chipbreaker on the TS16-ER08NPT WMP32G promotes stable chip formation and reliable evacuation, reducing interruptions and assisting consistent surface quality. Is this insert compatible with standard TS16 toolholders? Yes, the insert follows the TS16 designation and is intended for use with toolholders designed for that insert type; verify clamping recommendations with the holder manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes; there is no affiliation between our company and the mentioned brands. The offered item is original and factory-new.
TS16-ER08RD WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WMP32G grade for reliable, long-lasting performance when machining rostfreier Stahl; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. TS16-ER08RD WMP32G – Indexable turning insert for rostfreier Stahl | Walter Tools TS16-ER08RD WMP32G is a coated indexable turning insert designed to provide stable cutting and consistent chip control in the machining of rostfreier Stahl across medium to robust cutting conditions. *Tiger·tec Gold coating for extended tool life *Optimised chip control ER08RD geometry *WMP32G grade for rostfreier Stahl machining *Reliable performance under medium to heavy cuts Durable coated grade for secure rostfreier Stahl machining The WMP32G grade, integrated into the Tiger·tec Gold family, is a coated carbide solution developed specifically for the demands of rostfreier Stahl. Its composition supports stable chip formation and resists common issues such as built-up edge and rapid flank wear. For production environments that require predictable tool life and fewer tool changes, this insert offers a measurable benefit: consistent cutting edge behaviour leads to reduced stoppages and a steadier cycle time without sacrificing dimensional control. Geometry tuned for chip control and surface consistency The ER08RD chipbreaker geometry delivers targeted chip control that reduces entanglement and eases chip evacuation in both roughing and semi-finishing operations. This geometry helps maintain a clean cutting zone, which directly contributes to improved surface finish and enhanced process security when machining tough, heat‑generating materials. By lowering the likelihood of unstable cutting conditions, the insert supports smoother toolpaths and more reliable results across serial production runs. Productivity gains through fewer interventions and simple tool selection Adopting this insert can increase overall productivity by extending the interval between tool changes and minimising manual intervention. The ISO-style designation and clear grade marking simplify easy tool selection for workshop planners and purchasing teams, ensuring compatible replacements and uniform performance across toolholders. Where operation reliability matters, the Tiger·tec Gold technology provides the hard-wearing characteristics necessary for sustained manufacturing throughput while keeping setup straightforward. Benefit from Walter Tools' Tiger·tec Gold performance — contact Metav Werkzeuge for a tailored tool recommendation and procurement assistance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: TS16-ER08RD-WMP32G-WALTER Designation: TS16-ER08RD WMP32G Product type: Indexable turning insert Manufacturer: Walter Tools Facts Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER08RD Applicable material group: M (rostfreie Stähle) Special features Coated carbide (beschichtetes Hartmetall) Optimised for stable chip formation Suitable for medium to robust cutting conditions Consistent cutting-edge behaviour for rostfreier Stahl FAQ What materials is this insert intended for? The TS16-ER08RD WMP32G insert is intended for machining rostfreier Stahl, designated by material group M and optimised through the Tiger·tec Gold grade. Which chipbreaker does the insert feature and why does it matter? The insert uses the ER08RD chipbreaker; this geometry improves chip control and evacuation, reducing rework and supporting a consistent surface finish in demanding cuts. How does the WMP32G grade affect tool life? WMP32G, as part of the Tiger·tec Gold family, provides a protective coating and substrate combination that enhances wear resistance and promotes longer, more predictable tool life under medium to robust conditions. Can the insert be used for both roughing and finishing operations? Yes, the ER08RD geometry and the WMP32G grade make the insert suitable for a range of operations from roughing to semi-finishing where rostfreier Stahl is processed. Is the TS16-ER08RD WMP32G compatible with standard indexable toolholders? The TS16-ER08RD WMP32G follows ISO-style designation conventions for indexable inserts, facilitating compatibility with common toolholder systems designed for this insert form. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and product names belong to their respective owners. Brand names and trademarks are mentioned exclusively for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original factory-new goods of the manufacturer.
TS16-ER08UN WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, optimised ER08UN chip control and robust coated‑carbide construction for secure machining of rostfreier Stahl; order the insert directly via Metav Werkzeuge or consult our specialists for process‑specific recommendations. TS16-ER08UN WMP22G – Indexable turning insert, Tiger‑tec Gold coating, for rostfreier Stahl (Walter Tools) A TS16-ER08UN WMP22G indexable turning insert engineered for dependable performance in moderate to demanding stainless‑steel machining applications Tiger·tec Gold coating for longer tool life ER08UN chipbreaker for controlled chips Coated carbide suited to rostfreier Stahl machining Stable cutting edge for consistent surface quality Consistent performance when machining rostfreier Stahl The insert combines the WMP22G grade with Tiger‑tec Gold coating to address the typical challenges of rostfreier Stahl: material toughness, tendency to form a built‑up edge and elevated cutting temperatures. The coated carbide substrate and tailored micro‑layer reduce flank wear and promote predictable wear behaviour, which translates into longer tool life and fewer insert changes. By specifying a grade optimised for these alloys, process stability is increased and scrap risk is reduced through improved dimensional accuracy. Precision chip control that cuts cycle times The integrated ER08UN chipbreaker is designed for dependable chip control, producing short, segmented chips under common turning conditions for rostfreier Stahl. Controlled chips improve surface finish and lower the risk of workpiece damage, while consistent chip flow reduces secondary handling. The combination of a stable geometry and the Tiger‑tec Gold surface treatment results in a stable cutting edge that supports higher metal removal rates without compromising component quality. Durable coating and geometry for productive machining Tiger‑tec Gold coating delivers enhanced thermal resistance and friction behaviour at the cutting zone, which helps to maintain the cutting edge under intermittent and continuous turning operations. The result is improved process security and fewer interruptions for insert changes. As an indexable insert, the design allows quick indexing to a fresh cutting edge, keeping machine uptime high and making the grade a cost‑effective choice for batch or serial production of rostfreie Stahl components. For specification advice or to obtain TS16-ER08UN WMP22G inserts for rostfreier Stahl applications, contact Metav Werkzeuge for application‑specific guidance and rapid supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: TS16-ER08UN-WMP22G-WALTER SKU: TS16-ER08UN-WMP22G-WALTER Label: Drehwendeschneidplatte TS16-ER08UN WMP22G Walter Tools Key specifications ISO designation: TS16-ER08UN WMP22G Grade code: WMP22G Material group: M (rostfreier Stahl) Features & suitability Coating technology: Tiger·tec Gold Chipbreaker: ER08UN Material of insert: coated carbide Application: machining of rostfreier Stahl Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The TS16-ER08UN WMP22G insert is specified for machining rostfreier Stahl; the WMP22G grade and Tiger‑tec Gold coating support secure chip formation and edge stability in these alloys. What does the ER08UN designation mean? ER08UN identifies the insert’s chipbreaker geometry, optimised to produce controlled, short chips during turning operations on rostfreie Stahl, improving surface finish and chip evacuation. How does Tiger‑tec Gold improve productivity? The Tiger‑tec Gold coating enhances thermal and abrasive resistance at the cutting edge, which maintains cutting performance longer and reduces the frequency of index changes for the insert. Is this a solid‑carbide tool or an indexable insert? This article is an indexable turning insert made from coated carbide; the indexable format allows rapid repositioning to a fresh edge and supports efficient shopfloor workflows. Which manufacturer produces this grade and what are its strengths? Walter Tools produces the WMP22G grade; the combination of robust edge geometry and Tiger‑tec Gold coating offers consistent performance, stable chip control and good wear resistance in rostfreie Stahl machining. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; Walter Tools is part of the Walter AG group and is recognized for precision cutting tools and engineering solutions. Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
TS16-ER08UN WMP32G WMP32G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the WMP32G grade and the ER08UN chipbreaker ensures stable chip formation and dependable edge life in stainless steel turning; this increases process security and reduces unplanned downtime. Benefit from a robust, coated carbide solution that is optimised for medium to robust cutting conditions. Order the TS16-ER08UN WMP32G insert directly via Metav Werkzeuge or ask our consultants if needed. TS16-ER08UN WMP32G turning indexable insert — Tiger·tec Gold, ER08UN chipbreaker (Walter Tools) The TS16-ER08UN WMP32G is a coated turning insert engineered for reliable performance when machining stainless steel under medium to robust conditions. Tiger·tec Gold coating for thermal stability Optimised for machining stainless steel ER08UN chipbreaker for controlled chips Consistent edge life with WMP32G grade Higher stability and predictable tool life for stainless steel The combination of the Tiger·tec Gold technology and the WMP32G grade gives a coated carbide solution that addresses the typical challenges of stainless steel: high ductility, heat generation and tendency to form built-up edge. The coating improves thermal resistance and protects the substrate, while the grade supports a stable cutting edge, which means fewer interruptions for edge changes. For production environments this translates into more consistent cycle times and a measurable improvement in process security, especially where medium to robust machining conditions are the norm. Improved chip control and surface quality for repeatable parts The ER08UN chipbreaker is designed to shape chips reliably when turning ISO M materials. Controlled chip formation reduces risk of entanglement and protects the workpiece from surface damage, resulting in better and more repeatable surface finishes. In practice, this means fewer rework operations and steadier results across batches. The insert’s geometry and the coated substrate work together to promote a predictable shearing action, helping to avoid build-up on the cutting edge and maintaining consistent surface quality throughout the tool life. Operational benefits and fit for workshops seeking productivity Selection of a dedicated grade for stainless steel reduces process variability. The robust behaviour of the WMP32G grade supports longer service intervals and stable performance under varying cutting forces. For workshops this can reduce indexing frequency and minimise toolholder downtime, contributing to lower overall machining costs and improved throughput. The TS16-ER08UN WMP32G insert integrates into standard turning tool systems and is particularly suitable where reliability and steady production results are priorities. Contact Metav Werkzeuge for availability, technical matching and ordering of the Walter Tools TS16-ER08UN WMP32G turning insert Technical data Article number: TS16-ER08UN-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-ER08UN WMP32G Walter Tools Designation: TS16-ER08UN WMP32G Series: Tiger-tec Gold Grade: WMP32G Chipbreaker: ER08UN Material group: M (stainless steel) Product type: Turning indexable insert Manufacturer: Walter Tools Facts No numerical characteristics provided Special features Coating technology: Tiger·tec Gold (coated carbide) Optimised for: stainless steel (ISO M) Chip control: ER08UN chipbreaker Intended conditions: medium to robust machining FAQ What materials is this insert suitable for? The TS16-ER08UN WMP32G insert is formulated for machining stainless steel and is designated for ISO M materials. How does the Tiger·tec Gold technology help in turning stainless steel? Tiger·tec Gold improves thermal resistance and substrate protection, which helps the WMP32G grade maintain a stable cutting edge during stainless steel turning. What is the role of the ER08UN chipbreaker? The ER08UN chipbreaker promotes controlled chip formation, reducing chip entanglement and supporting consistent surface finish when using the TS16-ER08UN WMP32G insert. Is this insert intended for high-production environments? Yes, the combination of the coated grade and chipbreaker is designed to enhance process security and repeatability, making it suitable for series production where reliable edge life is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners and are mentioned here for explanatory purposes only. There is no affiliation between our company and Walter Tools. The offered item is an original, factory-new product of the manufacturer.
TS16-ER08UN-F5 WMP32G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold combination of a wear-resistant coated carbide grade and an optimised chip breaker to secure consistent machining of stainless steel; order directly via Metav Werkzeuge or request application advice from our consultants. TS16-ER08UN-F5 WMP32G indexable turning insert – Tiger·tec Gold for stainless steel | Walter Tools The TS16-ER08UN-F5 WMP32G is an indexable turning insert engineered for machining stainless steel under medium to robust cutting conditions, providing controlled chip formation and reliable edge life. Tiger·tec Gold coated grade WMP32G Optimised chip control for stainless steel ER08UN-F5 chip breaker for reliable chips Robust coated carbide for medium to heavy cuts Proven performance for challenging stainless-steel machining The Tiger·tec Gold coating combined with the WMP32G grade delivers a balance between wear resistance and toughness, which is especially beneficial when facing the adhesive tendencies of stainless steel. The coating reduces flank wear and extends the useful life of the cutting edge, while the substrate supports edge stability under thermal stress. As a result, the insert enables steadier cutting parameters and fewer tool changes, which contributes to improved machine uptime and a more predictable production flow. Predictable chip control and reduced built-up edge risk The integrated ER08UN-F5 chip breaker is designed to promote controlled chip segmentation when turning tough, low-thermal-conductivity alloys. Controlled chip formation lowers the likelihood of a built-up edge, a common cause of poor surface finish and premature tool failure in austenitic and other stainless grades. Explaining briefly: a chip breaker shapes the flow and curl of the chip so that heat is distributed and the chip evacuates reliably, permitting higher feed rates without compromising finish or edge life. Practical workshop advantages and process stability Using this indexable insert standardises process behaviour across batches where ISO M materials are common. The coated carbide construction provides repeatable performance and easier process setup, which shortens ramp-up time for new production runs. For manufacturers seeking higher throughput with consistent surface quality, the insert reduces corrective rework and contributes to predictable cycle times. The combination of the Walter Tools engineering approach and the Tiger·tec Gold technology supports stable machining in both single-shift and continuous production environments. Contact Metav Werkzeuge for tailored cutting-data, availability and application advice on Walter Tools Tiger·tec Gold inserts: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: TS16-ER08UN-F5-WMP32G-WALTER Product type: Indexable turning insert Designation: TS16-ER08UN-F5 WMP32G Grade: WMP32G Series: Tiger-tec Gold Chip breaker: ER08UN-F5 Manufacturer: Walter Tools Facts Material group: M (stainless steel) Suitable for: rostfreier Stahl (ISO M) Special features Coating: Tiger·tec Gold Material base: Coated carbide Application focus: Medium to robust cutting conditions Intended benefit: Stable chip formation and edge life FAQ What materials is this insert suitable for? The TS16-ER08UN-F5 WMP32G is specified for machining stainless steel (ISO M); the WMP32G grade and Tiger·tec Gold coating are selected to manage adhesion and heat in these alloys. How does the ER08UN-F5 chip breaker improve machining? The ER08UN-F5 chip breaker promotes controlled chip curl and segmentation, which reduces built-up edge and enables more reliable chip evacuation when turning stainless materials with the Walter Tools insert. Can this insert be used for finishing and roughing operations? The robust coated carbide of the WMP32G grade is suitable for medium to heavier cutting conditions; depending on insert geometry and machine setup, it can be applied for both stable finishing and productive semi-finishing cuts. What process benefits can be expected when switching to this insert? Expect fewer unscheduled tool changes, more consistent surface quality and improved process stability on stainless-steel batches thanks to the coating and optimised chip control of the insert. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com