TS16-ER08UNJ WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Gold coating and the WMP32G grade for dependable machining of stainless steel; improved chip control and stable cutting edges support a smooth production flow. Order the TS16-ER08UNJ WMP32G directly via Metav Werkzeuge or ask our consultants for application advice. TS16-ER08UNJ WMP32G indexable turning insert — WMP32G for stainless steel, Walter Tools The TS16-ER08UNJ WMP32G is an indexable turning insert engineered for reliable turning of stainless steel in medium to robust machining conditions. Tiger‑tec Gold coating for longer tool life Optimised chip control for stainless steel Coated cemented carbide grade WMP32G Reliable edge stability in medium to robust conditions Predictable performance for stainless steel turning The insert is built around the WMP32G grade within the Tiger‑tec Gold family, a coated cemented carbide solution optimised for the demands of the ISO group M (stainless steels). These materials tend to be tough and generate heat at the cutting zone; the combination of this grade and coating supports consistent chip formation and reduces the risk of built‑up edge. For workshops seeking repeatable results, the insert provides a balance of wear resistance and toughness that translates into fewer unexpected tool changes and more predictable cycle times. Consistent chip control and stable cutting edge The ER08UNJ chipbreaker geometry delivers controlled chip evacuation and helps maintain a stable cutting edge under variable feed and depth conditions. The geometry is designed to break and eject chips efficiently when machining sticky, work‑hardening stainless steels, improving surface finish and reducing rework. By combining a purpose‑designed chipbreaker with a robust coating system, the solution addresses two core challenges of stainless‑steel turning: thermal load and chip behaviour, resulting in a more reliable turning process and improved component quality. Shop‑floor benefits: throughput and process security Selecting this insert supports higher productivity through longer edge life and fewer interruptions for tool changes. The Tiger‑tec Gold technology helps dissipate heat and preserves the cutting edge, which reduces consumable use and contributes to lower overall machining costs per part. Additionally, compatibility with standard toolholders and predictable wear characteristics make it easier to plan maintenance intervals and tool inventories, increasing overall process security and throughput on the shop floor. For precision stainless‑steel turning, specify the TS16-ER08UNJ WMP32G from Walter Tools — contact Metav Werkzeuge for ordering and application support at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: TS16-ER08UNJ-WMP32G-WALTER Product: Indexable turning insert ISO designation: TS16-ER08UNJ WMP32G Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: ER08UNJ Manufacturer: Walter Tools Material group: M (stainless steels) Facts No numerical data provided Special features Coated cemented carbide grade WMP32G (Tiger‑tec Gold) Chipbreaker geometry ER08UNJ for optimised chip control Intended for machining of stainless steels (ISO group M) ISO identification: TS16-ER08UNJ WMP32G FAQ What materials is this insert best suited for? The TS16-ER08UNJ WMP32G is intended primarily for stainless steel applications (ISO group M) and offers a good compromise between wear resistance and toughness for medium to robust cutting conditions. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold coating on the WMP32G grade increases wear resistance and heat management, which contributes to longer edge life and more consistent surface quality during turning operations. What role does the ER08UNJ chipbreaker play? The ER08UNJ chipbreaker is designed to control chip formation and evacuation when machining sticky or work‑hardening stainless steels, reducing the risk of built‑up edge and improving process stability. Is the insert compatible with standard turning toolholders? The TS16-ER08UNJ WMP32G uses a common ISO designation for indexable inserts, making it compatible with the corresponding TS16 toolholder interfaces designed for this geometry. Which benefit is most noticeable in production? Users typically see fewer tool changes and more predictable cycle times thanks to the combined effect of the WMP32G grade and Tiger‑tec Gold coating, which improves tool life and process reliability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names such as Walter Tools are mentioned for explanatory purposes only. There is no connection between our company and the named manufacturers. The offered item is original, factory‑new merchandise of the manufacturer.
TS16-ER08W WMP32G Wendeplatten - Walter Tools
Benefit from a combination of Tiger‑tec Gold coating and the WMP32G grade for reliable machining of rostfreier Stahl; the insert offers stable chip formation and extended tool life for medium to robust cutting conditions. Order genuine Walter Tools inserts directly via Metav Werkzeuge or consult our advisors for cutting parameters and application support. TS16-ER08W (TS16-ER08W WMP32G) WMP32G — Walter Tools turning insert, Tiger‑tec Gold for rostfreier Stahl TS16-ER08W WMP32G is an indexable turning insert engineered for medium to heavy-duty turning of rostfreier Stahl, delivering predictable performance and long service intervals. Tiger‑tec Gold coating for high wear resistance Optimised for rostfreier Stahl machining ER08W chipbreaker for stable chips Walter Tools quality and reproducibility Consistent productivity with advanced coating technology The combination of the Tiger‑tec Gold coating and the WMP32G grade provides high wear resistance and thermal stability in demanding turning operations. By using a coated carbide substrate designed specifically for machining rostfreier Stahl, the insert maintains edge integrity under increased temperature and adhesive wear. This improves productivity through longer cutting intervals and fewer interruptions for tool changes, translating into a more efficient production flow and predictable process windows. Stable chip formation and surface quality with ER08W The ER08W chipbreaker is engineered to produce short, controllable chips when processing tough, work‑hardening rostfreier Stahl. Stable chip control reduces the risk of built‑up edge and prevents chip entanglement, which helps to preserve the workpiece surface finish and minimise rework. For workshops seeking repeatable results, the insert’s geometry and chipformer work together to deliver a balanced compromise between shear stability and clearance, supporting consistent dimensional accuracy. Practical advantages for shopfloor use and process planning As a coated carbide turning grade, the insert supports medium to robust cutting parameters, offering a pragmatic route to economic machining of rostfreier Stahl. The grade’s focus on stable edge behaviour and broad material coverage simplifies tool selection across varied stainless steel alloys, reducing assortment complexity. In production terms, this means fewer tool variants to stock and the potential for lower total machining costs owing to extended life and reduced downtime. How the grade supports reliable machining decisions The WMP32G designation denotes Walter Tools’ coated carbide technology tailored to handle the adhesion and heat‑related challenges of rostfreier Stahl. The result is controlled wear progression rather than sudden edge failure, which aids in establishing baseline cutting data for process planners. When integrating the insert into machining cycles, planners can expect a combination of predictable flank wear and steady component finish, which simplifies quality monitoring and process optimisation. Contact Metav Werkzeuge to request tailored cutting data and order genuine Walter Tools Tiger‑tec Gold inserts for rostfreier Stahl machining via Metav Werkzeuge Technical Data SKU: TS16-ER08W-WMP32G-WALTER Product: Turning insert TS16-ER08W WMP32G Type: Indexable turning insert Manufacturer: Walter Tools Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: ER08W Application: rostfreier Stahl Material group: M Facts ISO designation: TS16-ER08W WMP32G Chipbreaker code: ER08W Series name: Tiger‑tec Gold Special features Coated carbide cutting grade Tiger‑tec Gold coating technology Designed for stable chip formation Optimised for rostfreier Stahl processing Walter Tools engineered performance FAQ What materials is this insert intended for? The TS16-ER08W WMP32G insert is intended primarily for machining rostfreier Stahl, the WMP32G grade and coating being tailored to handle typical stainless steel challenges. What benefits does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on this Walter Tools insert increases wear resistance and thermal stability, helping to extend tool life and support consistent surface quality when cutting rostfreier Stahl. Which chip shape does the ER08W breaker produce? The ER08W chipbreaker produces short, controllable chips suitable for medium to robust turning of rostfreier Stahl, aiding chip evacuation and reducing built‑up edge. Is this insert suitable for general production environments? Yes; the WMP32G grade and coated substrate are designed for repeatable results under industrial conditions, offering a reliable balance of wear resistance and edge stability for rostfreier Stahl applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Mention of brand names is for explanation of compatibility and quality only; there is no affiliation between our company and the referenced manufacturers. The offered item is an original, factory‑new product of the manufacturer.
TS16-ER09UN WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coated carbide performance, stable chip control and long edge life for efficient stainless steel turning; order the insert directly via Metav Werkzeuge or consult our technical team for application-specific advice. TS16-ER09UN WMP32G indexable turning insert – for stainless steel (Tiger‑tec Gold) by Walter Tools A versatile TS16-ER09UN WMP32G indexable turning insert engineered for reliable machining of stainless steel under medium to robust cutting conditions. TS16-ER09UN WMP32G indexable insert Tiger‑tec Gold coated carbide grade Optimised for stainless steel machining Stable chip formation and edge life Consistent performance for stainless steel turning The combination of Tiger‑tec Gold coating and the WMP32G grade provides a solution tailored to the challenges of machining stainless steel, where toughness and heat build‑up are common. The coated carbide substrate supports a stable cutting edge and reduces the risk of built‑up edge, which leads to more predictable tool life and fewer interruptions in production. This results in a measurable improvement in process reliability and component quality for series turning operations. Reliable chip control and improved surface finish The ER09UN chipbreaker is designed to generate short, controllable chips when turning ductile and work‑hardening alloys. Stable chip formation reduces the likelihood of entanglement, lowers cutting forces and diminishes vibration, which in turn helps to secure a better surface finish and fewer reworks. For manufacturers seeking consistent cycle times and repeatable part quality, this insert supports steady machining with less operator intervention. Economic machining and straightforward integration By extending edge life and maintaining sharpness under demanding conditions, the insert contributes to lower tool change frequency and improved uptime. Compatible with standard toolholders that accept the TS16 geometry, the insert integrates easily into existing tool sets and reduces setup complexity. The TS16-ER09UN WMP32G insert therefore supports higher overall equipment effectiveness and cost-efficient production runs without compromising on reliability. For demanding stainless‑steel turning tasks, contact Metav Werkzeuge to specify the Walter Tools TS16-ER09UN WMP32G insert and secure optimised performance — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: TS16-ER09UN-WMP32G-WALTER Description: Drehwendeschneidplatte TS16-ER09UN WMP32G Walter Tools Product type: Indexable turning insert Series: Tiger‑tec Gold Grade: WMP32G Chipbreaker: ER09UN Material group: M (stainless steel application) Manufacturer: Walter Tools Facts Designation: TS16-ER09UN WMP32G Coated carbide grade: WMP32G Application group: M Geometry: TS16 Special features Coating technology: Tiger‑tec Gold Optimised for rostfreier Stahl (stainless steel) Stable chip formation Suitable for medium to robust cutting conditions FAQ What materials is this insert suitable for? The TS16-ER09UN WMP32G insert is optimised for stainless steel (material group M) and performs reliably under medium to robust turning conditions. What benefits does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WMP32G grade improves wear resistance and helps maintain a stable cutting edge, which supports consistent tool life and process reliability. How does the ER09UN chipbreaker affect machining? The ER09UN chipbreaker is designed for controlled chip breaking and evacuation, producing short chips that reduce vibration and contribute to an improved surface finish. Is the insert compatible with standard toolholders? The TS16 geometry is a common indexable insert form; the TS16-ER09UN WMP32G will fit toolholders designed for TS16 inserts, simplifying integration into existing tool setups. Can this insert reduce downtime in production? By offering extended edge life and stable cutting behaviour on stainless steel, this insert helps lower the frequency of tool changes and supports more continuous production cycles. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Die Walter AG (Markenauftritt: Walter Tools) gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-ER09W WMP32G WMP32G Wendeplatten - Walter Tools
Reliable machining results for stainless steel are achieved through the combination of the Tiger‑tec Gold coating and the WMP32G grade, delivering stable chip formation and improved edge life; order the TS16‑ER09W WMP32G insert via Metav Werkzeuge or consult our specialists for application guidance. TS16-ER09W WMP32G indexable turning insert — Tiger‑tec Gold for stainless steel, Walter Tools The TS16-ER09W WMP32G is a coated indexable turning insert designed for reliable machining of stainless steel under medium to robust cutting conditions. Tiger‑tec Gold coated for longer life WMP32G grade tuned for stainless steel ER09W chipbreaker for controlled chips Consistent edge stability and wear resistance Stable process behaviour for stainless steel turning The combination of the Tiger‑tec Gold technology and the WMP32G grade produces a coated carbide chemistry that supports stable chip formation when machining stainless steel. The coating and substrate pairing reduces the tendency for built‑up edge and thermal softening, which commonly impair surface finish and tool life in this material class. This results in a more reliable cycle time and fewer unscheduled tool changes, improving throughput for serial turning operations. Fewer interruptions, higher productivity Designed for medium to robust cutting conditions, the insert offers edge stability and wear resistance that translate into sustained cutting performance. The ER09W chipbreaker shapes chips into manageable forms, lowering the risk of entanglement and aiding evacuation from the cutting zone. For production environments, this means fewer stoppages and a steadier output rate — a rational improvement to process security that contributes directly to higher overall productivity. Practical guidance for application and material groups The insert is intended for the ISO group M (stainless steel), which characteristically demands tools that handle toughness and heat generation. The ER09W chipbreaker provides consistent chip control across a range of feeds and depths, helping to prevent work‑hardening at the tool edge. As an indexable insert, it can be rotated to present a fresh cutting edge when permissible, reducing tooling costs and simplifying inventory management compared with solid tools. Compatibility and workshop integration Manufactured by Walter Tools, the insert is compatible with standard turning toolholders that accept the TS16 family geometry. Its coated carbide construction makes it suitable for series production as well as demanding one‑off jobs where secure chip control and repeatable surface quality are essential. Selection of cutting parameters should reflect the workpiece grade of stainless steel and the required surface finish, with the aim of balancing cutting speed and tool life for the specific operation. For robust stainless steel turning with Walter Tools' Tiger‑tec Gold WMP32G grade, contact Metav Werkzeuge for tailored machining advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TS16-ER09W-WMP32G-WALTER Article: TS16-ER09W WMP32G Product type: Indexable turning insert Manufacturer: Walter Tools Grade: WMP32G Series: Tiger‑tec Gold Core data Material group: M (stainless steel) Chipbreaker: ER09W Coating: Tiger‑tec Gold (coated carbide) ISO designation: TS16-ER09W WMP32G Special features Coated carbide grade optimised for stainless steel Stable chip formation and secure chip control Designed for medium to robust cutting conditions Suitable for repeatable industrial turning operations FAQ Is this insert suitable for machining stainless steels? Yes. The TS16-ER09W WMP32G insert is specifically designed for the ISO M group and performs well on stainless steels, offering stable chip formation and reduced built‑up edge. What role does the ER09W chipbreaker play? The ER09W chipbreaker shapes and controls chips to enable safe evacuation from the cut, improving process stability and reducing the risk of chip-related interruptions during turning. How does the Tiger‑tec Gold technology affect tool life? The Tiger‑tec Gold coating improves wear resistance and thermal performance of the WMP32G grade, which extends cutting edge life under the medium to robust conditions typical for stainless steel machining. Can the insert be indexed to use multiple corners? Yes. As an indexable turning insert, the TS16-ER09W WMP32G can be rotated to present unused cutting edges, lowering per‑edge cost and simplifying tool management. Which applications benefit most from this insert? Serial production and demanding one‑off turning operations on stainless steel benefit particularly, where consistent surface quality, chip control and extended tool life are priorities. Walter Tools is a brand of Walter AG and noted for precision cutting tools. Protected trademarks and product names belong to their respective owners. The mention of brand names serves explanation only and does not imply any partnership or endorsement. The offered article is an original factory‑new product of the manufacturer. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com
TS16-ER1.0ISO WMP22G WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP22G grade tuned for stainless steel and the ER1.0ISO chipbreaker to secure stable chip formation and reliable cutting-edge performance in medium to robust turning operations. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. TS16-ER1.0ISO WMP22G — indexable turning insert, Tiger·tec Gold coating for stainless steel by Walter Tools The TS16-ER1.0ISO WMP22G is an indexable turning insert designed to provide consistent chip control and durable cutting edges when machining stainless steel under medium to robust conditions Tiger·tec Gold coating for high process security WMP22G grade optimised for stainless steel machining Stable chip formation and consistent cutting edge Suitable for medium to robust machining conditions Consistent machining performance for stainless steel components The combination of the Tiger·tec Gold coating and the WMP22G cutting grade delivers a balance of wear resistance and chip control specifically for stainless steel applications. The coating reduces flank wear and supports a stable cutting edge at elevated temperatures, which is particularly relevant for austenitic and other tough stainless alloys that tend to produce built-up edge and high heat at the cutting zone. As a result, the insert helps to maintain dimensional consistency and surface quality over extended tool life, reducing unplanned interruptions in production. Predictability and process security that support productivity By choosing a coated carbide grade engineered for the M-material group, operations gain process security and fewer unexpected tool changes. The insert’s properties promote repeatable cutting behaviour, facilitating stable cycle times and lower scrap rates. For manufacturers seeking to optimise throughput while preserving surface finish, this grade offers a pragmatic compromise between edge robustness and economic performance. The improved tool life also contributes to lower overall tooling costs per part in medium to robust cutting conditions. Better chip control and surface integrity with the ER1.0ISO chipbreaker The ER1.0ISO chipbreaker is designed to enable reliable chip breaking and evacuation when turning stainless steels, which often produce long, stringy chips. Effective chip control reduces the risk of part damage, tool interference and secondary operations to clear swarf. In addition, the controlled chip flow helps to avoid built-up edge formation, supporting improved surface integrity and a more predictable finishing process without the need for complex cooling strategies. Application focus and integration into existing tooling systems The insert is provided in an indexable format that integrates with corresponding toolholders compatible with the TS16 geometry. This allows straightforward replacement and repositioning of cutting edges, simplifying tooling logistics on the shop floor. The coated carbide construction and the specific grade characteristics make the insert suitable for workshops producing medium to heavy stainless-steel components where reliability and reproducible results are priorities. For clients introducing new workpiece alloys or adjusting feeds and speeds, the insert’s known behaviour with M-group materials reduces the need for lengthy process development. For tailored advice on using the Walter Tools Tiger·tec Gold WMP22G insert in specific applications or to secure the TS16-ER1.0ISO WMP22G for production, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TS16-ER1.0ISO-WMP22G-WALTER Product: indexable turning insert (Drehwendeschneidplatte) Series: Tiger·tec Gold Grade: WMP22G Chipbreaker: ER1.0ISO Manufacturer: Walter Tools Facts Material group: M (stainless steel) Intended application: turning / external machining Coating technology: Tiger·tec Gold Grade type: coated carbide Special features Optimised for rostfreie Stähle (stainless steel) Designed for stable chip formation Balanced wear resistance and edge security Suitable for medium to robust cutting conditions FAQ What materials is this insert suitable for? The TS16-ER1.0ISO WMP22G insert by Walter Tools is optimised for stainless steel (material group M) and intended for medium to robust turning operations. How does the Tiger·tec Gold coating benefit heat-prone alloys? The Tiger·tec Gold coating on the WMP22G grade reduces flank wear and helps maintain a consistent cutting edge under elevated temperatures commonly encountered when machining stainless steel. Can the ER1.0ISO chipbreaker improve surface finish? Yes, the ER1.0ISO chipbreaker supports controlled chip formation and evacuation, which reduces built-up edge and contributes to improved surface integrity during turning. Is this insert suitable for high-speed turning? The WMP22G grade and Tiger·tec Gold coating are engineered for process security in medium to robust conditions; suitability for very high cutting speeds should be evaluated within the context of machine capability and cutting data. How does this insert affect tooling logistics on the shop floor? As an indexable insert with standard TS16 geometry, the product simplifies edge changes and inventory management while delivering consistent performance with compatible holders. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Trademarked names and product designations are the property of their respective owners. Brand names and protected product names are mentioned for clarification only. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
TS16-ER1.0ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of high process security, stable chip formation and the Tiger‑tec Gold coating for consistent performance in rostfreier Stahl turning; order or request supply via Metav Werkzeuge when planning tool refreshes. TS16-ER1.0ISO WMP32G indexable turning insert — ER1.0ISO chipbreaker, Tiger‑tec Gold — Walter Tools The TS16-ER1.0ISO WMP32G is an indexable turning insert designed for machining rostfreier Stahl in medium to robust cutting conditions, delivering secure chip control and prolonged tool life. Tiger‑tec Gold coated carbide grade WMP32G ER1.0ISO chipbreaker for secure chip control Designed for rostfreier Stahl machining Stable cutting edge for repeatable results Increased process reliability when machining rostfreier Stahl The Tiger‑tec Gold WMP32G grade is formulated for the specific demands of rostfreier Stahl, where material toughness and built-up edge formation present challenges. The combination of a coated carbide substrate and the Tiger‑tec Gold surface treatment improves thermal resistance and wear behaviour, so flank wear progresses more predictably. For production environments this means fewer unplanned insert changes and more consistent surface finishes, which contributes directly to higher uptime and lower manufacturing variance. Safer chip control with the ER1.0ISO chipbreaker The ER1.0ISO chipbreaker is engineered to produce short, controllable chips when cutting ductile, work‑hardening materials typical of rostfreier Stahl. Controlled chip formation reduces the risk of entanglement and tool interference, which in turn eases chip evacuation and shortens cycle interruptions. The feature is especially beneficial in automated or lights‑out turning operations, where reliable chip behaviour supports unattended runs and improves operational safety. Economical cutting through improved edge stability The WMP32G grade balances toughness and hardness to resist edge chipping on interrupted cuts and to delay abrasive wear during continuous operations. This coating technology is optimised for mixed conditions, giving a longer effective tool life compared with uncoated grades in comparable applications. The result is a lower total cost of tooling per component and improved predictability in tool replacement intervals, supporting leaner inventory and scheduling. Practical fit for workshop and production setups The insert’s designation and geometry (TS16 size with ER1.0ISO chipbreaker) make it compatible with a wide range of turning toolholders used in industrial machining centres and lathes. The insert is supplied as a plated, indexable component that can be rotated to present fresh cutting edges, which reduces downtime during tool changeovers and simplifies stock management. For customers establishing or scaling repetition production on rostfreier Stahl, the design supports straightforward integration into existing tool plans. For specific application recommendations on Walter Tools Tiger‑tec Gold inserts or to arrange supply and delivery through Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: TS16-ER1.0ISO-WMP32G-WALTER Product designation: TS16-ER1.0ISO WMP32G Product type: indexable turning insert Facts Insert size: TS16 Chipbreaker designation: ER1.0ISO Grade: WMP32G Coating family: Tiger‑tec Gold Special features Coated carbide (Tiger‑tec Gold) Suitable for rostfreier Stahl Designed for medium to robust cutting conditions Promotes stable chip formation and edge stability FAQ What materials is this insert suitable for? The TS16-ER1.0ISO WMP32G insert is specified for machining rostfreier Stahl and has been optimised for the toughness and thermal behaviour typical of these alloys. What does the WMP32G grade offer compared with uncoated alternatives? WMP32G, part of the Tiger‑tec Gold family, provides improved thermal resistance and wear control versus uncoated cemented carbide, resulting in more consistent cutting edge life for rostfreier Stahl applications. How does the ER1.0ISO chipbreaker affect production performance? The ER1.0ISO chipbreaker promotes short, controllable chips, which reduces the risk of chip entanglement and supports unattended or automated turning operations using the TS16 geometry. Is the TS16 designation compatible with common toolholders? TS16 denotes the insert size and fits standard turning toolholders designed for this insert family; the format supports quick indexing of multiple cutting edges to reduce downtime. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer.
TS16-ER1.0ISO-3 WMP32G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Gold coating and the WMP32G grade for stable cutting edges and reliable chip control in stainless steel machining; the ER1.0ISO‑3 chipbreaker supports secure chip formation and consistent surface quality. Order the insert or request application advice via Metav Werkzeuge for a tailored supply and cutting-data recommendation. TS16-ER1.0ISO-3 WMP32G — Turning indexable insert with Tiger‑tec Gold coating (Walter Tools) The TS16-ER1.0ISO-3 WMP32G is a coated carbide turning insert designed for medium to robust machining of stainless steels, offering enhanced wear resistance and improved process reliability. Tiger‑tec Gold coating for extended wear resistance Optimised ER1.0ISO‑3 chipbreaker for secure chip control Specialised for machining stainless steels (ISO group M) Boost in-process productivity through wear-resistant cutting grade The combination of Tiger‑tec Gold coating and the WMP32G carbide grade delivers a tangible improvement in tool life and component throughput. The advanced coating technology reduces flank wear and helps to maintain a stable cutting edge under the elevated temperatures typical of machining stainless steels, which are prone to work hardening. As a result, tool-change intervals extend and machine uptime increases, enabling a more predictable production rhythm and fewer interruptions for regrinding or replacement. Reliable chip control and surface quality for demanding turning tasks The ER1.0ISO‑3 chipbreaker is engineered to promote consistent chip formation, reducing the risk of built-up edge and long, tangled chips that disrupt unattended cycles. Improved chip control directly supports a better surface finish and reduces the need for secondary operations. For workshops focussing on repeatable part quality, this insert helps maintain process security during medium to robust cutting conditions, especially when machining components where thermal and mechanical loads are significant. Practical benefits for workshop workflow and process planning Adopting a coated insert with this specification contributes to predictable tool performance and easier process planning. The grade’s resistance to edge degradation supports repeatable part dimensions over longer tool life, which in turn reduces inventory turnover for spare inserts and minimises downtime. Combined with established Walter Tools manufacturing standards, the insert supports stable production routines and simpler sorting of cutting grades across similar turning applications. For precision stainless-steel turning with proven process security, contact Metav Werkzeuge for delivery options and customised cutting data for Walter Tools Tiger‑tec Gold WMP32G inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: TS16-ER1.0ISO-3-WMP32G-WALTER Designation: TS16-ER1.0ISO-3 WMP32G Manufacturer: Walter Tools Product type: Turning indexable insert Series: Tiger‑tec Gold Grade: WMP32G Core specifications Application group: M (stainless steels) Chipbreaker: ER1.0ISO‑3 Special features Coating: Tiger‑tec Gold (coated carbide) Material code: M Suitability: medium to robust machining conditions Brand characteristics: Walter Tools quality and process stability FAQ What materials is this insert intended for? The TS16-ER1.0ISO-3 WMP32G insert is intended primarily for stainless steels (ISO group M) and is optimised for medium to robust cutting conditions. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold coating increases wear resistance and supports a stable cutting edge, which helps to extend tool life and maintain surface quality during stainless-steel turning. What benefit does the ER1.0ISO‑3 chipbreaker provide? The ER1.0ISO‑3 chipbreaker promotes secure and consistent chip formation, reducing the risk of built-up edge and improving process reliability for unattended or long-cycle operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mention of brand names such as Walter Tools is for explanatory purposes only and does not imply any affiliation between Metav Werkzeuge and the brand owner. The offered item is an original, factory-new product from the manufacturer.
TS16-ER1.0ISO-F5 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for dependable performance when machining stainless steels; the insert delivers stable chip formation and robust edge life for continuous production. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TS16-ER1.0ISO-F5 WMP32G — Indexable turning insert, Tiger·tec Gold coating for stainless steel, Walter Tools TS16-ER1.0ISO-F5 WMP32G is an indexable turning insert designed to handle medium to robust conditions in the machining of stainless steels, offering secure chip control and reliable cutting-edge performance. Tiger·tec Gold coated grade WMP32G Optimised for stainless steel machining Stable chip control ER1.0ISO-F5 Reliable edge stability and repeatability Increased process reliability for stainless-steel turning The insert provides a repeatable cutting performance that reduces process interruptions and scrap. Built on the Tiger·tec Gold coating family, the grade promotes stable chip formation and resists edge damage under the high heat and toughness typical of stainless steels. As a result, machinists benefit from fewer tool changes and more predictable cycle times, supporting continuous production and improved overall equipment effectiveness. The design is oriented towards practical shop-floor demands, prioritising throughput and consistent workpiece quality. Precise chip control to cut downtime The ER1.0ISO-F5 chipbreaker geometry focuses on controlled chip shaping and evacuation during turning operations. By reliably breaking chips into manageable lengths, the insert minimises risks of entanglement, workpiece surface marks and machine stoppages. Such chip management directly translates into reduced manual intervention and safer machining cycles. For operations that require steady feeds and moderate to high cutting parameters, the geometry helps maintain surface finish while limiting built-up edge formation on the tool. Coating and grade explained for predictable tool life The WMP32G designation denotes a coated carbide grade tailored for use on stainless steels. The Tiger·tec Gold coating system combines advanced layers for heat resistance and adhesion, enabling longer edge life under thermal and mechanical stress. This technological combination supports a robust cutting edge that tolerates common stainless-steel challenges such as work hardening and material adhesiveness. For engineers and purchasing managers, the benefit is a lower cost per component over production runs thanks to fewer insert replacements and higher machining uptime. Practical application and workshop advantages In practice, this insert suits a range of turning tasks on stainless materials where medium to robust conditions apply — from batch production to continuous turning of shafts and fittings. The material grouping (M) signals suitability for rostfreie Stähle (stainless steels) that demand stable cutting behaviour. Integrating this insert into existing toolholders that accept the TS16-ER1.0ISO-F5 designation ensures quick changeover and consistent positioning repeatability. The predictable performance supports planning for tool inventories and reduces the variability of part outcomes across shifts. Contact Metav Werkzeuge to discuss how the Tiger·tec Gold WMP32G grade can be matched to specific stainless-steel turning operations and to arrange a supply tailored to production needs. Technical data Article number: TS16-ER1.0ISO-F5-WMP32G-WALTER SKU: TS16-ER1.0ISO-F5-WMP32G-WALTER Product type: Indexable turning insert Manufacturer: Walter Tools Facts ISO designation: TS16-ER1.0ISO-F5 Grade: WMP32G Coating family: Tiger·tec Gold Material group: M (stainless steels) Special features Coated carbide grade Optimised for stainless steel machining Stable chip control ER1.0ISO-F5 chipbreaker Reliable edge stability and repeatability FAQ What materials is this insert intended for? The TS16-ER1.0ISO-F5 WMP32G insert is intended primarily for stainless steels (material group M), where toughness and heat generation require a specialised coated grade. How does the Tiger·tec Gold coating affect tool life? Tiger·tec Gold coating on the WMP32G grade improves thermal resistance and adhesion, which helps preserve the cutting edge under challenging turning conditions and extends tool life. Can the ER1.0ISO-F5 geometry be used at higher feed rates? The ER1.0ISO-F5 chipbreaker is designed for controlled chip formation and can support higher feed rates within the limits of the machine and material; selection should consider workholding and rigidity. Is this insert suitable for automated production environments? Yes, the insert’s repeatable edge position and stable chip control make it suitable for automated turning processes where consistency and reduced intervention are priorities. Which brand supplies this insert and how does that influence quality? Walter Tools supplies the TS16-ER1.0ISO-F5 WMP32G insert; Walter’s product families, such as Tiger·tec Gold, are developed for stable cutting edges and consistent performance in industrial applications. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, brand-new manufacturer product. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
TS16-ER1.0ISO-M5 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for reliable chip control and extended edge life in stainless‑steel turning; order the TS16-ER1.0ISO-M5 WMP32G directly via Metav Werkzeuge or request application advice from their consultants. TS16-ER1.0ISO-M5 WMP32G – Indexable turning insert for rostfreier Stahl by Walter Tools The TS16-ER1.0ISO-M5 WMP32G is a coated carbide indexable turning insert engineered for secure chip formation and robust performance when machining rostfreier Stahl under medium to demanding conditions. Tiger·tec Gold coated grade WMP32G Optimised for rostfreier Stahl Stable chip formation and durable cutting edge Built for consistent stainless‑steel performance The insert combines the WMP32G grade with Tiger·tec Gold coating to address the specific challenges of machining rostfreier Stahl, such as material toughness and heat generation. The coating reduces built‑up edge tendency and improves thermal resistance, which translates into a more consistent cutting process and fewer interruptions. This results in higher first‑pass yields and reduced rework for components that demand close tolerances. Reliable edge life and secure chip control Thanks to its coated carbide substrate and optimised microstructure, the insert promotes stable chip formation and a durable cutting edge even in intermittent cuts or tougher stainless‑steel batches. Stable chips mean fewer machine stops for chip clearance and less risk of workpiece damage; the combination of grade and coating supports predictable wear behaviour, simplifying tool life planning and reducing unplanned downtime in production cycles. Chipbreaker geometry that keeps cycles moving The ER1.0ISO-M5 chipbreaker is designed to control chip flow and minimise tangling in longitudinal and light facing operations. As an indexable insert, the component can be rotated to present fresh cutting edges, maintaining part accuracy while lowering tooling cost per machined component. The ISO designation clarifies fit and compatibility with standard toolholders, helping shops integrate the insert quickly into existing turning setups without lengthy adjustments. Operational advantages for production environments Using this insert improves process reliability and can raise overall productivity in batch and single‑piece production where rostfreier Stahl is prevalent. Less frequent edge failure and consistent surface finish shorten inspection cycles and reduce the need for secondary operations. Supplied by Walter Tools, the insert suits workshops looking for a balance of stable cutting performance and economical tool life under medium to robust operating conditions. For application guidance or to check availability of the Walter Tools TS16-ER1.0ISO-M5 WMP32G, contact Metav Werkzeuge for tailored recommendations and technical support at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TS16-ER1.0ISO-M5-WMP32G-WALTER Description: Drehwendeschneidplatte TS16-ER1.0ISO-M5 WMP32G Product type: Indexable turning insert Manufacturer: Walter Tools Grade: WMP32G Facts ISO designation: TS16-ER1.0ISO-M5 WMP32G Material group code: M Applicable material: rostfreier Stahl Special features Coating technology: Tiger·tec Gold Chipbreaker: ER1.0ISO-M5 Coated carbide grade Suitable for medium to robust turning conditions FAQ What materials is this insert best suited for? The TS16-ER1.0ISO-M5 WMP32G is optimised for machining rostfreier Stahl and supports stable chip control and consistent surface quality in these alloys. What advantages does Tiger·tec Gold provide? Tiger·tec Gold coating enhances thermal resistance and wear behaviour; with the WMP32G grade it reduces built‑up edge and extends edge life under high heat and adhesive conditions. How does the ER1.0ISO-M5 chipbreaker affect machining? The ER1.0ISO-M5 chipbreaker shapes chip flow to avoid tangling and supports smooth evacuation in turning operations, improving process continuity and reducing machine interventions. Is this an indexable insert compatible with standard toolholders? Yes, the component is an indexable turning insert with an ISO designation that indicates compatibility with corresponding toolholder systems for quick integration. Which workshops benefit most from this insert? Production and jobbing shops working frequently with rostfreier Stahl—such as automotive, food‑industry components, and precision engineering—will see improved process stability and reduced rework. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer (Walter Tools).
TS16-ER1.25ISO WMP22G Wendeplatten - Walter Tools
The combination of the WMP22G grade and Tiger·tec Gold coating delivers reliable chip control and extended tool life for stainless steel turning, improving process stability and reducing machining interruptions. Order the TS16-ER1.25ISO WMP22G insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. TS16-ER1.25ISO WMP22G — Indexable turning insert, Tiger·tec Gold coating by Walter Tools The TS16-ER1.25ISO WMP22G is an indexable turning insert engineered for robust machining of stainless steels (ISO M), combining a dedicated chipbreaker with a coated carbide grade for stable performance under medium to heavy cutting conditions. Tiger·tec Gold coating for extended tool life Optimised for stainless steel (ISO M) Stable chip control in medium to heavy cuts Consistent wear resistance and edge stability Improved reliability for stainless‑steel turning The WMP22G grade, integrated in the Tiger·tec Gold series, is a coated carbide formulation designed specifically for machining stainless steels. Its composition supports stable chip formation and resists the tendencies of work-hardening and edge build-up typical of these alloys. The result is fewer tool changes and a more predictable turning process that supports higher overall productivity. Predictable chip control and machining behaviour The ER1.25ISO chipbreaker geometry delivers controlled chip segmentation for a wide range of turning cuts. By combining a purpose‑designed chipbreaker with the coated carbide substrate, this indexable insert reduces entangling and contributes to a consistent surface finish. For manufacturing environments seeking repeatable cycles, the improved chip evacuation enhances throughput and minimises secondary handling. Lower process risk through advanced coating technology Tiger·tec Gold technology enhances thermal stability and wear resistance, which translates into longer tool life and steadier cutting edges. The coating supports reduced flank wear during demanding operations, which helps to maintain component tolerances and reduce scrap rates. In short production runs as well as longer series, the grade offers a balance between durability and reliable cutting performance. Selection guidance for best results This insert is aimed at operations where stainless steels (ISO M) are the primary material and where medium to robust cutting conditions are common. When choosing this type of insert, prioritise suitable cutting parameters and toolholder stability to exploit the edge stability and chip control properties. For detailed recommendations on feeds, speeds and holder compatibility, technical consultation is available to match the insert to the specific machining task. For machining stainless steels with the advantages of Tiger·tec Gold, contact Metav Werkzeuge for specimen quantities, technical pairing advice and to secure supply at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: TS16-ER1.25ISO-WMP22G-WALTER Name: Drehwendeschneidplatte TS16-ER1.25ISO WMP22G Walter Tools Grade: WMP22G Series: Tiger·tec Gold Material class: M Core data Chipbreaker: ER1.25ISO Substrate: coated carbide Application group: ISO M (stainless steels) Suitability: medium to robust cutting conditions Special features Tiger·tec Gold coating technology Stable chip formation and edge stability Optimised for stainless steel machining Coated carbide for improved wear resistance FAQ Is this insert suitable for machining austenitic stainless steels? The TS16-ER1.25ISO WMP22G insert from Walter Tools is developed for ISO M materials, including austenitic stainless steels, and offers chip control and edge stability appropriate for these alloys. What advantage does the Tiger·tec Gold treatment provide? Tiger·tec Gold on the WMP22G grade increases thermal resistance and wear performance, which improves tool life and maintains cutting-edge integrity when turning stainless steels. How does the ER1.25ISO chipbreaker affect surface finish? The ER1.25ISO chipbreaker on this turning insert promotes controlled chip formation, which supports consistent surface quality and reduces the risk of built-up edge during medium to heavy cuts. Can this insert be used for light finishing passes? While optimised for medium to robust conditions, the TS16-ER1.25ISO WMP22G can be employed for finishing with adjusted feeds and speeds; consult application parameters to ensure the desired surface results. How does WMP22G compare to other grades for stainless work? WMP22G balances wear resistance and chip control for stainless steels; it is particularly suited where process reliability and reduced edge build-up are priorities in turning operations. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners and are mentioned here for clarification only. There is no affiliation between our company and the named manufacturers. The offered article is an original, factory‑new product of the manufacturer Walter Tools. The brand Walter Tools appears in the product designation where applicable.
TS16-ER1.25ISO WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold technology, the WMP32G coated carbide grade and the ER1.25ISO chipbreaker to achieve stable chip formation and reliable turning of stainless steels; order the insert via Metav Werkzeuge or consult the team for application advice. TS16-ER1.25ISO WMP32G — Indexable turning insert for stainless steel (Walter Tools) The TS16-ER1.25ISO WMP32G is an indexable turning insert engineered for secure, repeatable machining of stainless steels under medium to robust cutting conditions Tiger·tec Gold coated carbide for improved wear resistance ER1.25ISO chipbreaker for controlled chip formation Designed for machining stainless steels (ISO group M) Stable cutting performance for stainless steels The combination of the Tiger·tec Gold coating and the WMP32G grade delivers consistent cutting performance when processing stainless steels, materials that typically demand secure chip control and thermal resilience. The ER1.25ISO chipbreaker is designed to promote short, manageable chips and prevent built-up edge, so process reliability is improved and unplanned interruptions are reduced. For production environments where repeatability and reduced scrap rates are priorities, this insert supports a measurable improvement in operational stability. Predictable tool life and reduced dressing frequency With a coated carbide base and a grade tuned for stainless steels, the insert offers enhanced wear resistance and predictable flank wear behaviour. This predictability aids in planning tool changes and extending productive tool life, which can lower tooling costs per component over time. The coating technology minimises adhesion and diffusion effects at elevated temperatures common in machining austenitic stainless steels, helping to maintain a sharper cutting edge for longer and to deliver consistent surface quality on turned components. Efficient chip control to protect component quality Effective chip control is central to machining stainless steel, and the ER1.25ISO geometry focuses on producing compact chips that are easier to evacuate from the cutting zone. Better chip behaviour reduces surface damage and avoids entanglement around the tool or workpiece, which in turn supports higher first-pass yield and reduces rework. The insert’s geometry supports stable cutting mechanics so that the tool path and surface finish remain consistent even in tougher workpiece conditions. Application notes and process orientation The insert is intended for use on materials classified under ISO group M (stainless steels) and performs best in medium to robust cutting regimes where secure chip formation and reduced edge build-up are required. Selection of cutting parameters should consider the workpiece grade, coolant strategy and rigidity of the setup; adjustments to feed and speed will help to balance tool life and component finish. Should geometry or process-specific data be required, technical datasheets are available and process trials are recommended for critical components. For tailored application advice or to request the Walter Tools TS16-ER1.25ISO WMP32G indexable insert, contact Metav Werkzeuge for direct ordering and technical consultation via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data SKU: TS16-ER1.25ISO-WMP32G-WALTER Product type: Indexable turning insert Manufacturer: Walter Tools Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER1.25ISO ISO designation: TS16-ER1.25ISO WMP32G Core data Material group suitability: M (stainless steels) Coating class: Tiger·tec Gold coated carbide Recommended application: Medium to robust cutting conditions Special features Coated carbide grade optimised for stainless steels ER1.25ISO chipbreaker for controlled chips Stable edge behaviour and reduced tendency to build up Developed for predictable tool life and process stability FAQ What materials is this insert suitable for? The TS16-ER1.25ISO WMP32G insert is designed primarily for machining materials in ISO group M, i.e. stainless steels, and performs best under medium to robust cutting conditions. What does the WMP32G grade offer? WMP32G is a Walter Tools coated carbide grade in the Tiger·tec Gold family that provides improved wear resistance and stable cutting behaviour when machining stainless steels. How does the ER1.25ISO chipbreaker benefit the process? The ER1.25ISO chipbreaker produces compact, controllable chips which reduce the risk of entanglement and help maintain component surface quality during turning operations. Can this insert improve tool life compared with uncoated grades? The combination of a coated carbide grade and the Tiger·tec Gold technology in the TS16-ER1.25ISO WMP32G insert is intended to extend tool life and deliver more predictable wear, especially when cutting austenitic stainless steels. Is the TS16-ER1.25ISO WMP32G suitable for high-temperature applications? The coating and grade selection support machining conditions where elevated temperatures occur, offering resistance to adhesion and diffusion mechanisms typical of stainless steel turning operations. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation and identification only. No affiliation between our company and the named trademark owners is implied. The offered item is an original, factory-new product of the manufacturer.
TS16-ER1.25ISO-F5 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for dependable machining of stainless steels; the insert delivers stable chip control and extended cutting-edge life under medium to robust turning conditions. Order the TS16-ER1.25ISO-F5 WMP32G directly via Metav Werkzeuge or consult our specialists for application advice. TS16-ER1.25ISO-F5 WMP32G indexable turning insert — Tiger·tec Gold coating for stainless steels | Walter Tools The TS16-ER1.25ISO-F5 WMP32G is an indexable turning insert with a dedicated chipbreaker, designed for efficient and reliable machining of stainless steels in medium to heavy turning operations. Tiger·tec Gold coating for long tool life WMP32G grade optimised for stainless steel Stable chip control under medium to heavy cuts Walter Tools quality and consistent edge stability Longer tool life from advanced coating technology The combination of the Tiger·tec Gold technology and the WMP32G carbide grade provides improved wear resistance and edge stability when turning stainless steels. Coated carbide minimises adhesive wear and reduces the tendency for built-up edge, which is common with tough, heat-generating stainless grades. The result is more predictable tool life and fewer unscheduled index changes, supporting steady production outputs and lowering overall machining cost per part. Consistent chip control and surface quality The integrated chipbreaker ER1.25ISO-F5 is engineered to promote controlled chip formation across a range of cutting parameters. By shaping chips into manageable forms and evacuating them reliably, the insert reduces the risk of entanglement and keeps the cutting zone clear. For operators, this means improved surface finish and reduced rework; for planners, it translates into fewer interruptions and more consistent cycle times on turning centres and lathes. Practical benefits for workshop productivity Designated as an insert in the TS16 family, this component fits toolholders engineered for TS16-style inserts and is suited to standard indexable turning setups. The coated, robust cutting edge supports medium to robust cutting conditions on stainless steels, making it a practical choice where repeatability and process security matter. Using a grade tuned to the demands of tough alloys yields measurable process stability, helping to maintain dimensional quality with fewer tool changes. For tailored recommendations on integrating the Walter Tools TS16-ER1.25ISO-F5 WMP32G into machining processes or to source this insert from Metav Werkzeuge, contact Metav Werkzeuge for fast procurement and application guidance. Technical data Article number: TS16-ER1.25ISO-F5-WMP32G-WALTER Product: Drehwendeschneidplatte TS16-ER1.25ISO-F5 WMP32G Manufacturer: Walter Tools Grade: WMP32G Series: Tiger·tec Gold Core specifications Material group: M Suitable for: stainless steels (per ISO 513) Chipbreaker: ER1.25ISO-F5 ISO designation: TS16-ER1.25ISO-F5 WMP32G Features and applications Coating technology: Tiger·tec Gold Coating type: coated carbide Application: medium to heavy turning conditions on stainless steels Insert designation: TS16 style FAQ What materials is this insert intended for? The TS16-ER1.25ISO-F5 WMP32G is specified for machining stainless steels (material group M) and performs reliably under medium to robust cutting conditions. How does the ER1.25ISO-F5 chipbreaker affect machining? The ER1.25ISO-F5 chipbreaker provides controlled chip formation and evacuation, which helps to improve surface finish and reduce the risk of chip-related interruptions when using the WMP32G insert. Is the WMP32G grade suited to high-temperature cutting? WMP32G is a coated carbide grade within the Tiger·tec Gold family designed for stable cutting on stainless steels, where heat and adhesion tendency are common; it therefore supports applications with elevated thermal load compared with uncoated grades. Can the TS16 insert be used in standard TS16 toolholders? The TS16-ER1.25ISO-F5 refers to the TS16 insert designation and is intended for toolholders that accept TS16-style indexable inserts; verify holder compatibility before assembly. What primary benefit does Tiger·tec Gold deliver for turning stainless steel? Tiger·tec Gold coating enhances wear resistance and edge stability on demanding stainless steel operations, resulting in more predictable tool life and consistent process performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and product names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
TS16-ER1.25ISO-M5 WMP32G Wendeplatten - Walter Tools
Drehwendeschneidplatte TS16-ER1.25ISO-M5 WMP32G von Walter Tools Die TS16-ER1.25ISO-M5 WMP32G ist eine beschichtete Wendeschneidplatte für die produktive Zerspanung von rostfreiem Stahl. Tiger·tec Gold Beschichtung für hohe Standzeit Speziell für rostfreie Stähle (Werkstoffgruppe M) Stabile Spanbildung bei mittleren bis robusten Bedingungen ER1.25ISO-M5 Spanbrecher für kontrollierte Späne Höhere Produktivität durch stabile Schneidkanten Die TS16-ER1.25ISO-M5 WMP32G wurde entwickelt, um die Prozesssicherheit in der Bearbeitung von rostfreiem Stahl deutlich zu erhöhen. Die Kombination aus beschichtetem Hartmetall und optimiertem Spanformer sorgt für konstante Schneidkanten und reduziert Nacharbeit sowie Werkzeugwechsel. Das Resultat ist eine messbare Steigerung der Produktivität und eine Verringerung der Stillstandszeiten in der Fertigung. Beschichtung und Sorteneigenschaft für sichere Spanbildung Die Tiger·tec Gold Beschichtung der Sorte WMP32G bietet eine robuste Schutzschicht gegen Verschleiß und sorgt für zuverlässige Spanabbildung bei hoher Wärmeentwicklung. Die Sorte ist als beschichtetem Hartmetall klassifiziert und auf die spezifischen Anforderungen der Werkstoffgruppe M abgestimmt. Erklärung: M steht für rostfreie Stähle, die zur Zähigkeit und Neigung zum Aufbauschneiden neigen; passende Sorten fördern eine kontrollierte Spanbildung. Einsatzbereiche und Zielgruppe Die Wendeschneidplatte eignet sich für Zerspanungsaufgaben in Werkstätten und industriellen Fertigungen, die häufig mit rostfreiem Stahl arbeiten. Besonders vorteilhaft ist die Platte bei mittleren bis robusten Schnittbedingungen, wenn konstante Oberflächengüte und reproduzierbare Ergebnisse gefordert sind. Anwender profitieren von hoher Prozesssicherheit, geringerer Ausschussrate und planbaren Standzeiten. Einfache Integration und handhabungsorientierte Vorteile Durch das standardisierte ISO-Format und den Spanbrecher ER1.25ISO-M5 lässt sich die Platte unkompliziert in bestehende Haltersysteme integrieren. Die stabile Spanbildung reduziert das Risiko von Spanverwicklungen und vereinfacht die Kühlmittelzufuhr. Anwender mit Fokus auf Wirtschaftlichkeit und konstante Fertigungsqualität erzielen so direkt spürbare Effizienzvorteile. Empfehlung: Für prozesssichere Bearbeitung von rostfreiem Stahl die TS16-ER1.25ISO-M5 WMP32G von Walter Tools wählen und technische Beratung bei Metav Werkzeuge GmbH anfordern: info@metav-werkzeuge.com, +49 2822 7131930 Produktmerkmale Artikelnummer: TS16-ER1.25ISO-M5-WMP32G-WALTER Marke: Walter Tools Serie/Baureihe: Tiger-tec Gold Produktart: Drehwendeschneidplatte Fakten Besonderheiten Beschichtung: Tiger·tec Gold Sortenbezeichnung: WMP32G Spanbrecher: ER1.25ISO-M5 (kontrollierte Spanform) Material: beschichtetem Hartmetall Anwendung: rostfreie Stähle (ISO Werkstoffgruppe M) FAQ Welche Werkstoffe bearbeitet die Wendeschneidplatte am besten? Die Wendeschneidplatte ist speziell für rostfreie Stähle ausgelegt; die Sorte WMP32G und die Tiger·tec Gold Beschichtung unterstützen eine sichere Spanbildung bei diesen Werkstoffen. Ist die TS16-ER1.25ISO-M5 WMP32G für Hochleistungsanwendungen geeignet? Ja, die Kombination aus beschichtetem Hartmetall und Tiger·tec Gold Beschichtung bietet gute Standzeiten und eignet sich für produktive Anwendungen unter mittleren bis robusten Bedingungen. Welchen Vorteil bietet der ER1.25ISO-M5 Spanbrecher? Der Spanbrecher ER1.25ISO-M5 sorgt für kontrollierte Späne und reduziert Spanverwicklungen, was die Maschinenverfügbarkeit und die Oberflächengüte verbessert. Wie lässt sich die Platte in bestehende Systeme integrieren? Die ISO-konforme Form ermöglicht die direkte Nutzung in standardisierten Haltern; dadurch ist ein einfacher Austausch ohne Maschinenanpassung möglich. Welche Marke steht hinter der Platte? Die Wendeschneidplatte stammt von Walter Tools und ist Teil der Tiger-tec Gold Baureihe, bekannt für konstante Schneidkanten und hohe Produktivität. Hersteller/Verantwortlich: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-ER1.5ISO WMP22G WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of a purpose‑made WMP22G grade, the Tiger‑tec Gold coating and an ER1.5ISO chipbreaker for reliable performance when machining stainless steel; order availability and further application advice are provided via Metav Werkzeuge or consult the team for process recommendations. TS16-ER1.5ISO WMP22G indexable turning insert — Tiger‑tec Gold coating, ER1.5ISO chipbreaker, Walter Tools TS16-ER1.5ISO WMP22G is a coated indexable turning insert engineered for medium to robust stainless steel turning operations and for integration into standard turning toolholders Tiger‑tec Gold coated carbide grade WMP22G ER1.5ISO chipbreaker for controlled chip formation Optimised for stainless steel machining Stable cutting edge for medium to robust conditions Improved chip control for consistent surface quality The combination of the ER1.5ISO chipbreaker and a tailored rake geometry provides predictable chip control, which reduces the risk of built‑up edge and improves component finish when machining stainless steel. In practice this means fewer interruptions for chip clearing and a more consistent workpiece surface, especially under conditions that tend to generate long, stringy chips. The chipforming design supports a steady evacuation path and helps maintain cutting forces within a narrow window, improving process stability and reducing the likelihood of unexpected downtime. Coated grade for extended cutting life and heat resistance The WMP22G grade, implemented in the Tiger‑tec Gold coating system, is a coated carbide composition developed to handle the heat and adhesion tendencies of stainless steels. This coating combination enhances wear resistance and preserves the cutting edge under elevated temperatures, leading to longer in‑service life compared with uncoated grades. The result is fewer insert changes and more productive machining cycles, which supports cost‑efficient batch production and repeatable results across series parts. Process reliability and workplace advantages When incorporated into a turning cell, this insert offers reliable edge stability for medium to robust cutting regimes. The design reduces variability in results, helping to maintain tolerances and surface quality part after part. Because the insert belongs to a widely used series, toolset standardisation and stock management are simplified. The brand backing from Walter Tools supports reproducible geometry and consistent batch quality, which in turn reduces the margin for process errors and supports predictable spindle loads and cycle times. For machining stainless steel with a robust, coated solution from Walter Tools, contact Metav Werkzeuge for tailored application advice and stock availability — eMail: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: TS16-ER1.5ISO-WMP22G-WALTER Designation: TS16-ER1.5ISO WMP22G Product type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WMP22G Chipbreaker: ER1.5ISO Facts Chipbreaker identification: ER1.5ISO Grade designation: WMP22G Series name: Tiger‑tec Gold Special features Coating: Tiger‑tec Gold Material base: coated carbide Suitable material group: M (stainless steels) Application: medium to robust stainless steel turning Stable cutting edge for process security FAQ What materials is this insert designed for? The TS16-ER1.5ISO WMP22G insert is designed primarily for stainless steel (stainless steels), in line with its M material classification for adhesion‑prone, heat‑generating alloys. What does the WMP22G grade offer? The WMP22G grade, part of the Tiger‑tec Gold family, provides a coated carbide formulation that increases wear resistance and thermal stability for longer tool life on stainless steel. How does the ER1.5ISO chipbreaker affect machining? The ER1.5ISO chipbreaker on this indexable insert ensures controlled chip formation and evacuation, reducing built‑up edge and improving surface finish during turning operations. Can this insert be used for finishing passes? Yes — the insert is suitable for a range of turning operations; its coated grade and chipbreaker combination make it appropriate for both robust cutting and finishing within the recommended parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-ER1.5ISO WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WMP32G grade optimised for rostfreier Stahl and the ER1.5ISO chipbreaker for reliable chip control — order the TS16-ER1.5ISO WMP32G insert directly via Metav Werkzeuge or ask the consultants for application advice. TS16-ER1.5ISO WMP32G indexable turning insert — Tiger·tec Gold for rostfreier Stahl (Walter Tools) The TS16-ER1.5ISO WMP32G is an indexable turning insert engineered for dependable performance when machining rostfreier Stahl under medium to robust cutting conditions Tiger·tec Gold coating for enhanced wear resistance Optimised for rostfreier Stahl machining ER1.5ISO chipbreaker for stable chip control WMP32G grade for consistent edge life Proven coating technology for longer tool life and fewer tool changes The combination of the Tiger·tec Gold coating and the WMP32G hardmetall grade delivers measurable improvements in wear resistance and edge stability when machining rostfreier Stahl. The multilayer coating reduces flank and crater wear by lowering friction and improving thermal resistance, which in turn supports longer tool life and more consistent part quality. For production environments where cycle time and reproducibility matter, this insert reduces the frequency of index changes and contributes to predictable tool-change intervals. The technical design targets the typical challenges of rostfreier Stahl, such as material toughness and a tendency for built-up edge, by promoting secure chip formation and a stable cutting edge. Stable chips and process security increase productivity The ER1.5ISO chipbreaker is designed to produce controlled, short chips in a wide range of turning conditions, improving chip evacuation and reducing the risk of entanglement. Stable chip control reduces interruptions and protects the workpiece surface, which supports higher spindle speeds and feed rates in many cases. This functional advantage translates into tangible productivity gains and less rework, making the insert suitable for serial production and demanding single-part machining alike. Where reliable process security is essential, the insert’s geometry and grade contribute to consistent surface finish and repeatable results. Practical application notes for workshop integration Intended primarily for rostfreier Stahl applications, the insert suits operators seeking a balance between wear resistance and edge robustness under medium to heavy engagement. The grade performs well in interrupted cuts and higher thermal loads that are typical with austenitic rostfreier Stahl. Selection of cutting data should follow general guidelines for rostfreier Stahl with attention to coolant strategy and tool overhang; the Tiger·tec Gold technology helps mitigate thermal issues but does not replace correct machining practice. For shops upgrading from general-purpose grades, this insert offers a clear step up in performance while keeping tool-handling straightforward and predictable. For tailored recommendations on cutting data, toolholders and delivery times for Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — expert advice and rapid supply are available. Technical data Article number: TS16-ER1.5ISO-WMP32G-WALTER Product type: Indexable turning insert Brand: Walter Tools Grade: WMP32G Facts Series: Tiger·tec Gold Chipbreaker: ER1.5ISO Material group: M (rostfreier Stahl) SKU: TS16-ER1.5ISO-WMP32G-WALTER Special features Coating: Tiger·tec Gold Suitable for: rostfreier Stahl Application: Turning, medium to robust cutting conditions Sortenbeschreibung: Beschichtetes Hartmetall FAQ What materials is this insert designed for? The TS16-ER1.5ISO WMP32G insert is designed primarily for machining rostfreier Stahl, with the WMP32G grade and Tiger·tec Gold coating optimised for these material characteristics. How does the ER1.5ISO chipbreaker affect machining? The ER1.5ISO chipbreaker promotes short, controlled chips, improving chip evacuation and process security when turning rostfreier Stahl with Walter Tools inserts. Can this insert be used for interrupted cuts? Yes, the WMP32G grade and the insert geometry provide robustness suitable for interrupted cuts and medium to heavy engagement in rostfreier Stahl applications. What advantage does the Tiger·tec Gold coating provide? Tiger·tec Gold reduces friction and improves thermal resistance, which enhances wear resistance and helps maintain a stable cutting edge during extended production runs with rostfreier Stahl. Is the TS16-ER1.5ISO WMP32G suitable for series production? Yes, the combination of consistent edge life, controlled chip formation and the Tiger·tec Gold coating makes this insert well suited to serial machining tasks where reproducibility is critical. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes; there is no affiliation between our company and the mentioned brands. The offered item is original, brand-new goods supplied by the manufacturer.
TS16-ER1.5ISO-2 WMP32G Wendeplatten - Walter Tools
Reliable chip control and extended tool life result from the combination of the Tiger·tec Gold coating and the WMP32G grade; the ER1.5ISO-2 chipbreaker secures stable chips when machining stainless steel. Order the insert directly via Metav Werkzeuge or consult our technical team for tailored application advice. TS16-ER1.5ISO-2 WMP32G – indexable turning insert with Tiger·tec Gold coating (Walter Tools) The TS16-ER1.5ISO-2 WMP32G is an indexable turning insert engineered for reliable machining of stainless steel in medium to robust cutting conditions. Tiger·tec Gold coating for extended life WMP32G grade for stainless steel machining ER1.5ISO-2 chipbreaker for stable chip control TS16 variant for precision turning Stable chip formation for uninterrupted production The combination of the ER1.5ISO-2 chipbreaker and the Tiger·tec Gold coating ensures consistent chip control, reducing interruptions caused by long or tangled chips. The chipbreaker geometry was developed to convert material flow into shorter, controllable segments during cutting; this reduces the risk of built-up edge and improves surface finish. For production environments where tool-change frequency and scrap must be minimised, the insert’s behaviour supports predictable cycle times and less machine downtime. Coated carbide grade tuned to stainless steel The WMP32G cutting grade is a coated carbide formulation optimised for stainless steel. Such materials are prone to toughness, adhesion and elevated heat at the cutting zone; the WMP32G chemistry together with the Tiger·tec Gold surface treatment provides enhanced thermal resistance and a robust cutting edge. This results in longer tool life under medium to robust conditions and lowers the likelihood of edge deformation. For applications requiring dependable performance on corrosion-resistant alloys, the grade offers a balance between wear resistance and edge stability. Geometry and system compatibility for precise turning Designed as a TS16-style indexable insert, this component delivers repeatable seating and indexing in standard toolholders that accept the TS16 geometry. The precise flank and rake relationships deliver precision in tool path control and help maintain dimensional accuracy across serial runs. Indexable inserts like this simplify inventory management and reduce setup time compared with brazed or solid tools, because a worn edge can be rotated to a fresh cutting corner rather than replacing the entire tool body. Practical benefits for workshop and production planning Specification clarity is important when selecting cutting tools: the insert’s designation, chipbreaker and grade (TS16‑ER1.5ISO‑2 WMP32G) make procurement and process documentation straightforward. The Tiger·tec Gold coating supports higher cutting temperatures and extended tool life, while the ER1.5ISO-2 chipbreaker contributes to reliable machining and improved surface quality. For operational planning, fewer interruptions and predictable wear behaviour help to improve throughput and reduce overall machining costs without compromising part quality. For technical clarification or geometry compatibility checks, Metav Werkzeuge’s advisory service is available. For machining stainless steel with a focus on process security and longevity, specify the Walter Tools TS16‑ER1.5ISO‑2 WMP32G insert and contact Metav Werkzeuge for personalised technical consultation or to place an order. Technical data SKU: TS16-ER1.5ISO-2-WMP32G-WALTER Designation: TS16-ER1.5ISO-2 WMP32G Product type: Indexable insert / Drehwendeschneidplatte Grade: WMP32G Series: Tiger·tec Gold Manufacturer: Walter Tools Core technical data Chipbreaker: ER1.5ISO-2 Material code: M Suitable material group: stainless steel Geometry: TS16 variant Coating: Tiger·tec Gold Special features Coated carbide cutting grade Optimised for medium to robust conditions Stable cutting edge and improved thermal resistance Designed for precision turning and repeatable indexing FAQ Which materials is this insert best suited for? The TS16-ER1.5ISO-2 WMP32G insert is specifically formulated for stainless steel; the WMP32G grade and Tiger·tec Gold coating address the adhesion and heat characteristics of these alloys. What advantage does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WMP32G grade increases thermal resistance and wear performance, helping the TS16-ER1.5ISO-2 WMP32G to deliver longer tool life and more consistent results under robust cutting conditions. How does the ER1.5ISO-2 chipbreaker improve machining? The ER1.5ISO-2 chipbreaker produces short, controllable chips during turning operations, reducing chip entanglement and the risk of built-up edge while improving surface finish and process stability with the TS16 geometry. Is this insert compatible with standard TS16 toolholders? Yes, the TS16 designation indicates compatibility with toolholders designed for TS16 indexable inserts, enabling precise seating and repeatable indexing. For which machining applications is this insert recommended? The insert is recommended for turning operations on stainless steel where medium to robust cutting parameters are required and where stable chip control and edge security are priorities. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are used for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original factory-new goods of the manufacturer.
TS16-ER1.5ISO-F5 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for secure chip formation and prolonged tool life when machining stainless steel; order the insert via Metav Werkzeuge or consult our specialists for application advice. TS16-ER1.5ISO-F5 WMP32G – Turning indexable insert, Tiger·tec Gold, for stainless steel (Walter Tools) TS16-ER1.5ISO-F5 WMP32G is an indexable turning insert designed for reliable performance in medium to robust turning operations on stainless steel Tiger·tec Gold coated carbide Optimised chip control for stainless steel Robust cutting edge for medium to heavy use Walter Tools grade WMP32G for reliable standtime Consistent chip control for predictable production The coated carbide grade from the Tiger·tec Gold series delivers stable chip formation even under the elevated temperatures and work-hardening tendencies of stainless steel. The integrated ER1.5ISO-F5 chipbreaker geometry supports short, controllable chips, which reduces the risk of built-up edge and improves reproducibility across batches. For production environments where cycle time and process reliability matter, this turning insert offers a tangible advantage: fewer interruptions for chip clearing and more consistent part quality from batch to batch. Coating and grade that extend tool life and productivity The WMP32G variety is a coated cemented carbide designed specifically for stainless applications, providing enhanced wear resistance and a balanced toughness-to-hardness ratio. The coating lowers flank wear rates and supports a stable cutting edge under variable cutting conditions, which extends effective tool life and reduces tool-change frequency. As a result, operators can expect improved overall equipment effectiveness and lower per-part tooling cost without compromising surface finish or dimensional control. Practical benefits for workshop and industrial turning Engineered for medium to robust conditions, this insert reduces process variability and supports repeatable results on challenging alloys. The combination of grade and chipbreaker reduces thermal and mechanical stresses on the cutting edge, which helps maintain surface integrity and dimensional accuracy. For manufacturers seeking straightforward integration, the insert’s ISO-style designation makes toolholder selection and indexing predictable, helping to standardise tooling across machines and fixtures. Application guidance and compatibility The insert grade is indicated for machining stainless steel according to the material group classification relevant to stainless alloys. The ER1.5ISO-F5 chipbreaker is optimised for turning operations that require short-to-medium chip evacuation and stable cutting when feeds and speeds vary. While exact cutting parameters depend on machine rigidity and workpiece geometry, the combination of Tiger·tec Gold coating and WMP32G grade favours conservative increases in cutting speed to gain productivity while retaining edge stability. Contact Metav Werkzeuge today for tailored recommendations on Walter Tools turning inserts and guidance on integrating the TS16-ER1.5ISO-F5 WMP32G into existing tool inventories — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data SKU: TS16-ER1.5ISO-F5-WMP32G-WALTER Product type: Drehwendeschneidplatte / Turning indexable insert Designation: TS16-ER1.5ISO-F5 WMP32G Facts Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: ER1.5ISO-F5 Manufacturer: Walter Tools Special features Coated cemented carbide Optimised for stainless steel Suitable for medium to robust turning conditions ISO-style insert designation for standard holders FAQ What materials is this insert suited for? The insert is specified for machining stainless steel; the WMP32G grade and Tiger·tec Gold coating support safe chip formation and edge stability on stainless alloys. How does the ER1.5ISO-F5 chipbreaker affect performance? The ER1.5ISO-F5 chipbreaker produces short, controllable chips suited to turning operations, improving process reliability and reducing chip-related interruptions when using the WMP32G grade. Is this grade suitable for high cutting speeds? The Tiger·tec Gold coating on the WMP32G grade enhances wear resistance, permitting higher cutting speeds than uncoated grades while maintaining a stable cutting edge on stainless steel. Can the insert be used in standard ISO toolholders? Yes, the TS16-ER1.5ISO-F5 designation corresponds to ISO-style insert geometries, making it compatible with standard toolholders designed for that insert shape and size. How does WMP32G differ from general-purpose carbide grades? WMP32G is tuned for the specific demands of stainless steel: a balance of toughness and wear resistance together with a coating optimised for preventing build-up and extending usable life in stainless applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are cited for explanatory purposes only and do not imply any affiliation between our company and the named manufacturers. The offered item is original, brand-new goods supplied by the manufacturer. Walter Tools is mentioned as the product brand.
TS16-ER1.5ISO-M5 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating performance, the WMP32G carbide grade and the ER1.5ISO‑M5 chipbreaker for reliable machining of rostfreiem Stahl; order the insert directly via Metav Werkzeuge or consult their technical advisors for process matching. TS16-ER1.5ISO-M5 WMP32G indexable turning insert – Tiger·tec Gold, for rostfreiem Stahl | Walter Tools The TS16-ER1.5ISO-M5 WMP32G is an indexable turning insert designed for secure chip formation and consistent performance when turning rostfreiem Stahl under medium to robust conditions. Tiger·tec Gold coating technology Optimised for rostfreiem Stahl (M) ER1.5ISO‑M5 chipbreaker for stable chips High-performance grade for demanding rostfreiem Stahl applications The grade from the Tiger·tec Gold series combines a coated carbide substrate with a tailored coating system to improve wear resistance and maintain a stable cutting edge during elevated temperatures typical of rostfreiem Stahl machining. This results in fewer interruptions for edge changes and a more predictable tool life, which supports higher process uptime and reduces unexpected downtime. The combination of material and coating is engineered to support reliable chip formation even when the workpiece material tends to be tough and prone to built-up edge. Predictable chip control and improved surface consistency With the ER1.5ISO‑M5 chipbreaker, the insert promotes repeatable chip segmentation that reduces entanglement and makes chip evacuation easier in turning operations. Better chip control translates into fewer machine stoppages and less manual clearing, while the improved cutting dynamics contribute to a more consistent surface finish on the component. For production environments where cycle time and surface quality matter, this insert offers measurable advantages in process stability and throughput. Practical benefits for workshop productivity The combination of the WMP32G grade and the specified chip geometry provides a balance between robustness and edge retention. This balance reduces the frequency of index changes and supports stable dimensional results over longer tool life. For operations processing rostfreiem Stahl in medium to heavy cutting regimes, the insert delivers a favourable cost‑benefit ratio through reduced tool handling and more consistent part quality. Integration into standard indexable toolholders is straightforward, keeping changeover simple and predictable. Application guidance and process considerations The insert is intended primarily for rostfreiem Stahl workpieces classified under ISO group M. To exploit its performance fully, pair the insert with coolant strategies and cutting parameters geared to prevent heat concentration at the cutting edge; modest depths of cut with optimised feed rates often yield the best combination of surface finish and tool life. When selecting speeds and feeds, the insert’s coated carbide construction supports moderate to elevated cutting speeds, but final settings should be validated on the specific machine and workholding arrangement. For process consultation or to specify the TS16-ER1.5ISO-M5 WMP32G for a particular application, contact Metav Werkzeuge for tailored recommendations and availability. Technical data Article number: TS16-ER1.5ISO-M5-WMP32G-WALTER Product: TS16‑ER1.5ISO‑M5 WMP32G indexable turning insert Manufacturer: Walter Tools Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER1.5ISO‑M5 Application group: M (rostfreiem Stahl) Facts Material group suitability: M (rostfreie Stähle) Coating: coated carbide (Tiger·tec Gold) Intended use: turning / indexable insert SKU: TS16-ER1.5ISO-M5-WMP32G-WALTER Special features Optimised for stable chip formation Improved wear resistance for elevated temperatures Balanced edge stability and toughness Designed for medium to robust cutting conditions FAQ What materials is this insert suitable for? The TS16-ER1.5ISO‑M5 WMP32G insert is specified for machining rostfreiem Stahl (ISO group M), offering secure chip control in tougher stainless materials. Which chipbreaker does the insert use and why is it important? The insert features the ER1.5ISO‑M5 chipbreaker; it is important because it promotes predictable chip segmentation and easier evacuation during turning operations. How does the Tiger·tec Gold series influence tool life? The Tiger·tec Gold coating enhances wear resistance and thermal stability, so the WMP32G grade often achieves longer tool life and more consistent cutting performance versus uncoated grades. Can this insert be used in standard indexable toolholders? Yes, the geometry is intended for conventional indexable turning toolholders that accept the TS16 format; verify holder compatibility before mounting. Is the insert suitable for heavy roughing operations? The insert is designed for medium to robust conditions; while it can be used for heavier cuts, application-specific validation is recommended to optimise speeds, feeds and coolant. Manufacturer/Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names are used solely for explanation. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the respective manufacturer.
TS16-ER1.75ISO WMP22G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WMP22G grade for secure chip formation and extended tool life in stainless steel turning; optimised for medium to robust conditions. Order the insert directly via Metav Werkzeuge or consult our specialists for tailored cutting data and application advice. TS16-ER1.75ISO WMP22G indexable turning insert – Tiger‑tec Gold, for stainless steel | Walter Tools TS16-ER1.75ISO WMP22G is an indexable turning insert designed to deliver reliable chip control and consistent surface quality when machining stainless steels. Tiger‑tec Gold coating for extended tool life WMP22G grade for stainless steel machining ER1.75ISO chipbreaker ensures secure chip control Coated carbide for stable cutting edges Consistent performance when machining stainless steels The combination of Tiger‑tec Gold coating and the WMP22G cutting grade provides a consistent machining platform for stainless steel (ISO group M). The coating reduces friction and thermal load at the cutting edge, which means the insert maintains a stable cutting edge for longer periods; this translates into fewer tool changes and higher machine uptime. For workshops that face sticky material behaviour and rapid heat build-up, the result is a measurable improvement in process reliability. The technical design focuses on secure chip formation to reduce built-up edge and maintain surface integrity. Secure chip control for uninterrupted production Engineered chip geometry (ER1.75ISO) promotes controlled chip formation, which reduces the risk of entanglement and machine stoppages. Controlled chips improve coolant reach and evacuation, lowering cycle-time variability and waste handling. In practical terms, secure chip control leads to fewer interruptions and a smoother production flow, which supports predictable output and easier scheduling. The insert’s coated carbide substrate provides the rigidity required for repeatable cutting performance under medium to robust cutting conditions. Lower process costs through extended tool life and productivity By reducing edge wear and improving thermal stability, the insert contributes to a better cost-per-part ratio. The coated carbide substrate combined with the grade’s wear characteristics supports longer tool life and consistent part quality, which reduces rework and inspection time. For manufacturers aiming to increase throughput without sacrificing surface finish, this solution offers a rational upgrade: fewer tool changes, stable dimensional results and improved overall equipment effectiveness. Technical users will appreciate the repeatable performance across batches. Contact Metav Werkzeuge to discuss recommended cutting parameters and optimise the Walter Tools Tiger‑tec Gold solution for specific stainless steel applications Technical Data Article number: TS16-ER1.75ISO-WMP22G-WALTER Product: Indexable turning insert Brand: Walter Tools Grade: WMP22G Series: Tiger‑tec Gold Chipbreaker: ER1.75ISO Data Applicable material group: M (stainless steel) Designation: TS16-ER1.75ISO WMP22G SKU: TS16-ER1.75ISO-WMP22G-WALTER Special features Coating technology: Tiger‑tec Gold Substrate: Coated carbide (cemented carbide) Typical application: Turning of stainless steels under medium to robust conditions Benefit: Optimised chip formation and stable cutting edge FAQ Which materials is this insert suitable for? The TS16-ER1.75ISO WMP22G insert is intended primarily for stainless steel (ISO group M) machining and is optimised for medium to robust cutting conditions. What advantage does the Tiger‑tec Gold coating deliver? Tiger‑tec Gold on the WMP22G grade reduces friction and thermal stress at the cutting edge, improving wear resistance and supporting longer tool life for Walter Tools inserts. What type of chip behaviour can be expected with the ER1.75ISO chipbreaker? The ER1.75ISO chipbreaking geometry promotes controlled, segmented chips for secure evacuation, reducing machine stoppages and improving process stability with this insert. Is the insert compatible with standard turning tool holders? The TS16-ER1.75ISO designation follows established insert geometries; compatibility depends on the holder type and clamping system but the insert is designed for conventional indexable turning systems. How does the WMP22G grade compare for productivity and surface finish? WMP22G balances wear resistance and edge stability to deliver consistent surface quality and longer intervals between tool changes, supporting higher productivity in stainless steel turning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product from the manufacturer.
TS16-ER1.75ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and the ER1.75ISO chipbreaker for steady, repeatable performance when machining stainless steels; the compact geometry offers reliable cutting-edge stability and predictable chip control. Order or specify the insert via Metav Werkzeuge for fast delivery and expert application advice. TS16-ER1.75ISO WMP32G indexable turning insert – Tiger·tec Gold, for stainless steel | Walter Tools The TS16-ER1.75ISO WMP32G is an indexable turning insert from Walter Tools, engineered to deliver stable chip formation and long tool life when machining stainless steel under medium to robust cutting conditions. Tiger·tec Gold coated grade WMP32G Optimised chip control ER1.75ISO Designed for stainless steel machining Reliable cutting‑edge stability Proven productivity through optimised grade and coating The combination of the WMP32G grade with Tiger·tec Gold technology is designed to extend cutting performance in demanding stainless‑steel operations. The coating system reduces flank wear and supports thermal stability, so the insert sustains a consistent cutting edge over longer cycles. This results in fewer interruptions for index changes and a measurable rise in process efficiency, particularly in serial production where run‑to‑run reproducibility is essential. Controlled chips and improved surface finish The ER1.75ISO chipbreaker has been shaped to promote dependable chip segmentation when turning tough, work‑hardening materials. Predictable chip flow lowers the risk of built‑up edge formation and enables a smoother interaction between tool and workpiece. The outcome is an improved surface quality with fewer secondary operations required, helping to streamline downstream processes and reduce overall machining costs. Application focus: stainless‑steel turning with confidence Developed for the ISO group M, this insert is targeted at the typical challenges of stainless‑steel machining: high toughness, tendency to work‑harden and elevated cutting temperatures. The welded combination of substrate and coating supports secure chip formation and edge robustness, making it suitable for both semi‑finishing and heavier turning passes where stability is a priority. Technical teams benefit from a grade that balances wear resistance with edge reliability. Integration and handling in the production environment As an indexable turning insert, the item integrates directly into standard toolholders that accept the TS16 designation, allowing quick replacement and minimal set‑up time. The standardised geometry simplifies tool inventory and contributes to predictable cycle times. For process planners, the clear allocation to stainless‑steel applications reduces trial‑and‑error and supports faster tool selection during job planning. Discuss specification and delivery with Metav Werkzeuge to ensure optimal deployment of Walter Tools Tiger·tec Gold inserts for stainless‑steel turning; contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for application advice and order coordination Technical data Article number: TS16-ER1.75ISO-WMP32G-WALTER Product name: TS16-ER1.75ISO WMP32G Product type: indexable turning insert Brand: Walter Tools Facts ISO group: M (stainless steel) Grade: WMP32G Series: Tiger·tec Gold Special features Chipbreaker: ER1.75ISO Coating technology: Tiger·tec Gold Material designation: M (suitable for stainless steel) ISO designation: TS16-ER1.75ISO WMP32G FAQ What materials is this insert intended for? The TS16-ER1.75ISO WMP32G insert is intended primarily for stainless steel applications; the WMP32G grade and Tiger·tec Gold coating support secure chip formation and edge stability when machining ISO group M materials. How does the ER1.75ISO chipbreaker affect machining? The ER1.75ISO chipbreaker promotes controlled chip segmentation and reduces built‑up edge risk, which leads to improved surface finish and more consistent cutting forces during turning operations with Walter Tools inserts. Can this insert be used for roughing and finishing? Yes, the balance of wear resistance and cutting‑edge stability in the WMP32G grade allows usage across semi‑finishing and more robust passes; final application parameters should be set according to the workpiece grade and machine capabilities. Is this a standard TS16 geometry for toolholder compatibility? The insert follows the TS16 designation, enabling straightforward integration into toolholders designed for that geometry and simplifying tool changeover and inventory management. What advantages does the Tiger·tec Gold series bring? Tiger·tec Gold offers enhanced thermal and wear performance, improving tool life and process reliability in demanding stainless‑steel turning scenarios when using the Walter Tools insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names are mentioned for explanation only; there is no connection between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer. The Walter AG (brand appearance: Walter Tools) is a worldwide leading manufacturer of precision tools for metalworking and is part of the Sandvik Group.
TS16-ER1.75ISO-F5 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a dedicated WMP32G grade for rostfreier Stahl and the ER1.75ISO-F5 chipbreaker for reliable chip control — this yields stable machining and predictable tool life. Order the insert directly via Metav Werkzeuge or consult the team for application support. TS16-ER1.75ISO-F5 WMP32G indexable insert — for rostfreier Stahl | Walter Tools TS16-ER1.75ISO-F5 WMP32G is a turning indexable insert optimised for machining rostfreier Stahl under medium to robust cutting conditions Tiger·tec Gold coated grade WMP32G ER1.75ISO-F5 chipbreaker for stable chips Optimised for rostfreier Stahl machining Walter Tools quality and repeatability Stable chip control reduces interruptions and improves security of process The ER1.75ISO-F5 chipbreaker is designed to generate short, controllable chips when machining rostfreier Stahl, reducing the risk of entanglement and tool damage. In practice, reliable chip formation translates into fewer stoppages, safer operations and more predictable cycle times. The combination of a dedicated chip geometry and the WMP32G grade supports consistent cutting behaviour in conditions where heat and material adhesiveness can otherwise cause built-up edge. Coating and grade extend tool life and surface quality The Tiger·tec Gold technology applied to this coated carbide grade provides enhanced wear resistance and stable cutting edges for demanding stainless applications. The result is improved surface finish and extended tool life in medium to robust cuts, which supports higher productivity and lower tooling costs per component. Where process security and repeatability matter, the coated grade helps maintain edge stability and reduces the need for frequent insert changes. ISO conformity and workshop compatibility for efficient tooling The ISO-style designation of the insert ensures interchangeability with standard toolholders and simplifies inventory management. The TS16-ER1.75ISO-F5 WMP32G format fits established tool systems, enabling quick replacement and consistent setup repeatability across machines. For production environments, this means reduced setup time and easier standardisation of turning operations without sacrificing cutting performance. Recommended applications and practical handling notes This insert grade is intended primarily for machining rostfreier Stahl under medium to robust conditions; uses include general turning, face turning and light hard-lean operations where stable chip control is required. As a coated carbide indexable insert with a purpose-built chipbreaker, it is not intended for non-metallics or specialised superalloy turning without further trial. For tailored recommendations on cutting data and toolholder selection, Metav Werkzeuge’s consultants can provide application-specific guidance. Contact Metav Werkzeuge for a tailored recommendation on Walter Tools' TS16-ER1.75ISO-F5 WMP32G for rostfreier Stahl machining — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: TS16-ER1.75ISO-F5-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-ER1.75ISO-F5 WMP32G Walter Tools Manufacturer: Walter Tools Product type: Turning indexable insert Series: Tiger·tec Gold Grade: WMP32G Core data ISO designation: TS16-ER1.75ISO-F5 WMP32G Material group: M (rostfreie Stähle) Chipbreaker: ER1.75ISO-F5 Coating technology: Tiger·tec Gold Special features Coated carbide grade optimised for rostfreier Stahl Stable chip formation for reduced interruptions Designed for medium to robust cutting conditions Repeatable performance and process security Brand: Walter Tools FAQ What materials is this insert suitable for? The TS16-ER1.75ISO-F5 WMP32G insert is formulated for machining rostfreier Stahl and comparable austenitic stainless materials under medium to robust conditions. How does the ER1.75ISO-F5 chipbreaker affect machining? The ER1.75ISO-F5 chipbreaker on the WMP32G grade promotes short, controllable chips, which improves operator safety and process stability during turns and facing. Is this insert compatible with standard ISO toolholders? Yes. The TS16-ER1.75ISO-F5 designation conforms to ISO-style insert geometries and is compatible with matching ISO toolholders, allowing straightforward tool changes and inventory alignment. Can this insert be used for finishing operations? The coated WMP32G grade delivers good surface quality in many turning operations; however, final finish depends on cutting data and machine rigidity — testing under actual conditions is recommended. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation and identification; there is no connection between our company and the named brand. The offered article is an original, factory-new product from the manufacturer.
TS16-ER1.75ISO-M5 WMP32G Wendeplatten - Walter Tools
Combine the Tiger·tec Gold wear resistance of the WMP32G grade with the ER1.75ISO-M5 chipbreaker for predictable chip control during rostfreier Stahl turning; benefit from longer tool life and stable cutting performance. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. TS16-ER1.75ISO-M5 WMP32G — Indexable turning insert for rostfreier Stahl machining by Walter Tools The TS16-ER1.75ISO-M5 WMP32G is an indexable turning insert engineered for medium to robust turning of rostfreier Stahl, combining a coated-carbide grade with a dedicated chipbreaker for reliable production performance Tiger·tec Gold coating for longer tool life WMP32G grade for rostfreier Stahl machining ER1.75ISO-M5 chipbreaker for secure chip control Walter Tools quality for stable cutting results Maximise uptime with a wear-resistant grade designed for rostfreier Stahl The TS16-ER1.75ISO-M5 WMP32G insert pairs WMP32G — a coated carbide grade within the Tiger·tec Gold family — with a geometry optimised for the specific challenges of rostfreier Stahl. Coated carbide combines a hard substrate with a thin hard coating to reduce abrasive wear and increase thermal resistance; this slows flank and crater wear and extends service intervals. The result is a lower frequency of insert changes and fewer unscheduled stops, which translates directly into improved throughput and reduced unit costs. Emphasis on stable chip formation helps control built-up edge tendencies typical of rostfreie Stähle, supporting consistent cycle times in batch production. Predictable surface quality through controlled chip formation A dedicated chipbreaker such as ER1.75ISO-M5 organises chip flow and reduces the risk of entangling or long stringy chips that can damage the workpiece or tool. Controlled chips minimise vibration and cutting force peaks, which improves surface finish and reduces the need for rework. In practice, this means a more reproducible part quality and fewer rejects when machining components rated to tight tolerances. The insert’s combination of geometry and coating therefore supports a more stable process window, making it easier to reach target roughness values on demanding rostfreier Stahl grades. Quick replacement and straightforward process integration The ISO-style designation indicates compatibility with standard toolholders in the TS16 family, enabling rapid indexation and replacement without complex set-up. Using indexable inserts reduces overhaul time compared with solid tools because worn cutting edges are replaced by indexing or swapping inserts rather than regrinding. This insert’s design therefore supports efficient line-side logistics and predictable tool-change intervals. Clear designation and consistent grade behaviour simplify tool life planning and inventory control, helping production managers achieve better OEE (overall equipment effectiveness). Proven brand engineering for industrial reliability Walter Tools’ Tiger·tec Gold technology and the WMP32G grade focus on a wide workpiece range and secure chip formation under demanding conditions — attributes valued in precision metalworking. Choosing this insert supports process security and reproducible performance across serial production runs; the grade’s balance of wear resistance and edge stability reduces downtime and supports longer intervals between tool inspections. For operations processing rostfreie Stähle, the combination of dedicated chip control and a high-performance coated grade provides a measurable productivity advantage while maintaining the consistency required in industrial environments. For application guidance or to specify the TS16-ER1.75ISO-M5 WMP32G insert for rostfreier Stahl turning, contact Metav Werkzeuge’s advisors at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss recommended holders and process parameters. Technical Data SKU: TS16-ER1.75ISO-M5-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-ER1.75ISO-M5 WMP32G Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WMP32G (coated carbide) ISO designation: TS16-ER1.75ISO-M5 WMP32G Product type: Indexable turning insert Facts No dimensions provided No corner radius specified No thickness data provided No tolerance class provided Special features Coated carbide grade WMP32G (Tiger·tec Gold) Chipbreaker: ER1.75ISO-M5 Suitable for rostfreier Stahl (M group) Designed for medium to robust cutting conditions Focus on stable chip formation and longer tool life FAQ What materials is this insert intended for? The TS16-ER1.75ISO-M5 WMP32G insert is intended for machining rostfreier Stahl (stainless steels), where the WMP32G grade supports secure chip formation and wear resistance. What does the WMP32G grade mean in practice? WMP32G denotes a Walter Tools coated carbide grade within the Tiger·tec Gold family; it provides high wear resistance and edge stability for demanding rostfreier Stahl applications. How does the ER1.75ISO-M5 chipbreaker affect performance? The ER1.75ISO-M5 chipbreaker organises chip flow to reduce entanglement and long chips, improving surface finish and process security when using the WMP32G-grade insert. Is the TS16-ER1.75ISO-M5 compatible with standard toolholders? The TS16 ISO-style designation indicates compatibility with holders designed for the TS16 family, allowing quick indexation and replacement of the insert. Can the insert be used in high-speed applications? WMP32G is tailored to medium to robust conditions for rostfreie Stähle; suitability for specific high-speed parameters depends on the machine, holder set-up and cooling strategy — Metav Werkzeuge can advise on recommended cutting data. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, brand-new product of the manufacturer Walter Tools.
TS16-ER10ACME WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WMP32G grade for reliable performance, and the ER10ACME chipbreaker for stable chip formation to keep stainless steel turning processes consistent and productive; order directly via Metav Werkzeuge or request application advice from the consultants. TS16-ER10ACME WMP32G indexable turning insert — Tiger‑tec Gold for stainless steel (Walter Tools) The TS16-ER10ACME WMP32G is an indexable turning insert designed for machining stainless steel, combining a coated‑carbide grade with a geometry optimised for secure chip control in medium to robust conditions Tiger‑tec Gold coated carbide grade WMP32G ER10ACME chipbreaker for stable chip control Suited for stainless steel machining Indexable insert format TS16 for turning applications Reliable cutting in stainless steel applications The combination of the WMP32G grade and the Tiger‑tec Gold coating provides a chemistry and coating stack engineered for the particular challenges of stainless steel: toughness, built‑up edge tendency and elevated cutting temperatures. This results in a coated carbide surface that supports predictable wear behaviour and helps maintain dimensional accuracy over multiple indexings. For production environments that require consistent tool life under moderate to demanding loads, this specification gives a reliable baseline for process planning. Stable chip formation and extended edge life The integrated ER10ACME chipbreaker is designed to control long, stringy chips typical of austenitic and other stainless alloys, reducing the risk of chip entanglement and improving surface integrity. Controlled chip formation reduces interruptions and tool change frequency, which in turn supports higher effective machine uptime. The insert geometry promotes a stable cutting edge, lowering the likelihood of sudden edge failure and enabling smoother transitions between passes. Enhanced process reliability and productivity Choosing an insert from the Tiger‑tec Gold series targets both tool life and cutting security: the coated surface and grade composition work together to deliver repeatable performance that supports predictable cycle times. In practice, this translates into fewer variant adjustments during series production and improved overall efficiency on turning centres. The performance balance of wear resistance and toughness helps to protect the tool edge under variable cutting conditions, contributing to sustained productivity. Straightforward integration and handling The TS16 style designation indicates compatibility with standard TS16 turning toolholders; the insert is indexable, enabling quick edge changes and efficient stock use. For applications planning and holder selection, knowledge of the precise seat and clamping is essential — Metav Werkzeuge’s technical advisors can confirm suitable toolholders and cutting parameters. For mixed‑material production, recognising that this grade targets stainless steel ensures appropriate selection for components where elevated heat and adhesion are expected. Contact Metav Werkzeuge for tailored application support on Walter Tools Tiger‑tec Gold inserts and ensure optimum machining results for stainless steel parts Technical data Article number: TS16-ER10ACME-WMP32G-WALTER Designation: TS16-ER10ACME WMP32G Product type: Indexable turning insert Brand: Walter Tools Facts Grade: WMP32G Coating series: Tiger‑tec Gold (coated carbide) Chipbreaker: ER10ACME Material group: M (stainless steel) Special features Suitable for stainless steel machining Stable chip control for demanding conditions Designed for medium to robust cutting parameters Indexable format for economical edge usage FAQ What materials is this insert intended for? The TS16-ER10ACME WMP32G insert is specified for stainless steel applications and is optimised to manage the toughness and heat generation typical of those alloys. How does the ER10ACME chipbreaker improve machining? The ER10ACME geometry promotes controlled chip formation and reduces the risk of long, stringy chips, improving surface finish and lowering interruption rates in turning operations. Which toolholders are compatible with the TS16 designation? TS16 indicates the insert format for compatible turning toolholders; confirmation of specific holder models and clamping methods can be provided when matching the insert to the machine setup. Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-ER10UN WMP32G WMP32G Wendeplatten - Walter Tools
Reliable performance for stainless steel turning is achieved by the combination of the WMP32G grade and the Tiger·tec Gold coating, while the ER10UN chipbreaker ensures controlled chip formation and consistent surface quality; order the insert directly via Metav Werkzeuge or consult the technical advisers for holder matching. TS16-ER10UN WMP32G indexable turning insert — Tiger·tec Gold, for stainless steel (Walter Tools) The TS16-ER10UN WMP32G is an indexable turning insert optimised for the machining of stainless steel under medium to robust cutting conditions Indexable insert TS16-ER10UN WMP32G by Walter Tools Tiger·tec Gold coating for improved wear resistance Engineered for stainless steel (ISO group M) ER10UN chipbreaker for secure chip control Extended edge life through advanced coating and grade The insert uses the Tiger·tec Gold coating combined with the WMP32G carbide grade to deliver consistent edge life in challenging stainless steel operations. This combination reduces flank and crater wear under the higher temperatures and adhesive tendencies typical of ISO group M materials. The coated substrate supports repeatable cutting performance, which contributes directly to reduced insert changes and steadier process windows on production lines. Reliable chip formation for improved surface finish Thanks to the ER10UN chipbreaker geometry and optimised rake geometry, the insert provides stable chip control and reduced built-up edge in common stainless steel turning tasks. Stable chip flow leads to fewer interruptions and a more uniform surface quality, while helping to avoid rework. The geometry is especially useful where medium to robust cuts are required and where predictable chips simplify handling and disposal in automated setups. Compatibility with standard toolholders and production workflows Designed around the TS16 seat geometry, the insert integrates into conventional indexable turning systems and supports high tool change efficiency. Emphasis on precision and reproducible seating improves assembly repeatability and reduces setup time, while the material and coating selection target higher productivity by extending tool life. The product benefits from Walter Tools' engineering background, offering a practical balance between wear resistance and reliable cutting behaviour for series production. For reliable, high-performance stainless steel turning with the TS16-ER10UN WMP32G insert, contact Metav Werkzeuge to check availability and technical matching of toolholders: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: TS16-ER10UN-WMP32G-WALTER Product type: Indexable turning insert Designation: TS16-ER10UN WMP32G Manufacturer: Walter Tools Facts Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER10UN Material group: M (stainless steel) Special features Coated carbide grade (Tiger·tec Gold) Suitable for stainless steel machining Stable chip formation and wear-resistant coating FAQ Which materials is this insert intended for? The TS16-ER10UN WMP32G insert is intended primarily for machining stainless steel (ISO group M) and performs well under medium to robust cutting conditions where adhesion and heat build-up are common. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WMP32G grade enhances wear resistance and helps to maintain edge integrity, resulting in longer tool life and more consistent component quality during series turning operations. How does the ER10UN chipbreaker affect machining? The ER10UN chipbreaker promotes reliable chip control and reduces the tendency for built-up edge in stainless steel turning, which improves surface finish and reduces process interruptions. Is the insert compatible with standard TS16 toolholders? The insert is designated TS16 and is compatible with standard indexable turning seats and holders designed for TS16 geometry, enabling straightforward integration into existing tool systems. What cutting conditions suit this insert best? This insert is engineered for medium to robust cutting operations in stainless steel where stable chip formation and wear resistance are priorities; specifics depend on machine rigidity and holder selection. Protected trademarks and trade names are owned by their respective proprietors. Brand names and registered trademarks are mentioned for explanation only; there is no affiliation implied between our company and the named brands. The item offered is an original, factory-new product of the listed manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com