TS16-ER10UNJ WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a dedicated ER10UNJ chipbreaker and Walter Tools' proven manufacturing to secure reliable machining of rostfreier Stahl under medium to robust conditions; order original inserts directly via Metav Werkzeuge or consult our specialists for process recommendations. TS16-ER10UNJ WMP32G — Walter Tools indexable turning insert, Tiger·tec Gold, ER10UNJ chipbreaker TS16-ER10UNJ WMP32G is a precision indexable turning insert designed for demanding operations on rostfreier Stahl; it combines a coated carbide grade with a specialised chipbreaker for controlled cutting and consistent performance. Tiger·tec Gold coating for long tool life Optimised ER10UNJ chipbreaker for stable chips Suited for rostfreier Stahl machining Original Walter Tools quality assurance Consistent performance for rostfreier Stahl workpieces The TS16-ER10UNJ WMP32G insert is engineered to improve process reliability when machining rostfreier Stahl, a material group known for toughness and heat generation. The WMP32G grade is a coated carbide designed to support secure chip formation and maintain a stable cutting edge, which reduces unexpected tool wear. In practice, this means fewer interruptions and a more predictable production rhythm, especially under medium to robust cutting conditions where edge integrity matters. Predictable chip control and improved surface quality With the ER10UNJ chipbreaker, chips are formed and evacuated more consistently, lowering the risk of built-up edge and re-cutting. The optimised geometry promotes a controlled chip curl, which supports both operator safety and machine uptime. As a result, workpiece surfaces benefit from fewer marks and a steadier finish, translating into reduced secondary operations and a more efficient workflow for series production. Tiger·tec Gold coating for extended tool life The Tiger·tec Gold technology offers a balanced combination of wear resistance and thermal stability. This coated system helps shield the substrate from heat and abrasion, keeping the cutting edge sharper for longer. For production environments that require repeatable results, the coating supports longer tool life without sacrificing dimensional accuracy, making the insert a practical choice for continuous or batch machining of corrosion-resistant alloys. Integration into standard tooling systems and productivity gains The insert is compatible with common indexable turning toolholders and can be integrated into existing tool setups without extensive reworking of clamping systems. By using a grade and chipbreaker tuned for rostfreier Stahl, process sheets can be standardised and cycle times stabilised. The outcome is less tool variance, fewer tool changes and an overall improvement in shop-floor productivity, backed by the manufacturing consistency associated with Walter Tools For application support or to source original Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored advice and ordering: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: TS16-ER10UNJ-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-ER10UNJ WMP32G Walter Tools Product type: Drehwendeschneidplatte Brand: Walter Tools Facts Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER10UNJ Special features Coating technology: Tiger·tec Gold Material group suitability: rostfreier Stahl (ISO M) Coated carbide grade Optimised chip control Walter Tools original insert FAQ What materials is this insert suitable for? The TS16-ER10UNJ WMP32G insert is specified for rostfreier Stahl (ISO group M), providing stable chip formation and edge life in such applications. Which chipbreaker does the insert use and what is its benefit? The insert features the ER10UNJ chipbreaker, which promotes consistent chip control and improved surface finish when machining rostfreier Stahl. Can the insert be used in standard turning holders? Yes, the indexable insert is designed for compatibility with common turning toolholders suitable for the TS16-ER10UNJ geometry. How does the Tiger·tec Gold series improve production? Tiger·tec Gold coating enhances thermal and wear resistance, extending tool life and supporting repeatable machining results in series production. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TS16-ER10W WMP32G WMP32G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the WMP32G grade ensures stable cutting edges and reliable performance in stainless steel turning; benefit from consistent chip control and long tool life for productive turning operations. Order directly via Metav Werkzeuge or consult our specialists for cutting data and process recommendations. TS16-ER10W WMP32G indexable turning insert by Walter Tools — optimised for stainless steel machining TS16-ER10W WMP32G is an indexable turning insert designed for robust turning of stainless steel, featuring a specialised ER10W chipbreaker and Tiger·tec Gold coating for enhanced edge stability and wear resistance Tiger·tec Gold coating for long tool life Optimised ER10W chipbreaker for stainless steel Robust WMP32G grade for medium to heavy cuts Consistent performance for stainless steel turning The WMP32G grade, developed within the Tiger·tec Gold series, provides a balanced solution for machining stainless steel where toughness and heat generation are common challenges. The coated carbide substrate delivers improved wear resistance while the coating reduces built-up edge tendency; this results in a stable cutting edge over longer tool life. In practice, shops benefit from fewer index changes and predictable tool behaviour, which supports higher machine utilisation and simplified process planning. Chip control and surface quality explained Equipped with the ER10W chipbreaker, the insert promotes controlled chip formation and evacuation under typical stainless steel cutting conditions. The chip geometry reduces the risk of long, stringy chips and supports consistent contact conditions at the cutting edge, improving surface finish and reducing the likelihood of workpiece damage. For operators less familiar with chipbreaker nomenclature: ER10W denotes a geometry optimised for medium-to-heavy feeds and materials that require active chip control, such as stainless steel. Operational benefits for production environments Using this indexable insert reduces downtime through extended edge life and reliable performance in tougher applications. The coated cutting material minimises flank wear and maintains dimensionally stable turning, which is particularly valuable for serial production and parts with tight tolerances. The insert is suited to a range of turning tasks where repeatability and process stability are prioritised; maintenance cycles are more predictable and tool inventory management becomes simpler. Contact Metav Werkzeuge to discuss the TS16-ER10W WMP32G for specific machining parameters or to request detailed cutting data and recommendations Technical data SKU: TS16-ER10W-WMP32G-WALTER Designation: TS16-ER10W WMP32G Product type: Indexable turning insert Brand: Walter Tools Core data Grade: WMP32G Coating technology: Tiger·tec Gold Material group: M (stainless steel) Features Chipbreaker: ER10W Material: coated carbide Application: machining stainless steel Series: Tiger·tec Gold FAQ What materials is this insert suitable for? The TS16-ER10W WMP32G insert is specifically designed for stainless steel machining; the WMP32G grade and Tiger·tec Gold coating support stable cutting in these materials. How does the ER10W chipbreaker affect operation? The ER10W chipbreaker on the indexable insert promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of long chips in stainless steel turning. Is this a coated carbide insert? Yes, the TS16-ER10W WMP32G is a coated carbide insert from the Tiger·tec Gold series, designed to extend edge life under demanding conditions. Can the insert be used for high-feed finishing? The insert is optimised for medium to robust cutting conditions; for finishing tasks with very light cuts, assess the specific cutting data to ensure the best surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer. Walter Tools is a trademark of the respective rights holder.
TS16-ER11.5NPT WMP32G WMP32G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold coating and the WMP32G grade delivers reliable chip control and extended edge life in demanding turning operations; the optimised ER11.5NPT chipbreaker enhances process stability when machining stainless steel. Order the insert via Metav Werkzeuge or consult the team for application-specific recommendations. TS16-ER11.5NPT WMP32G indexable turning insert — Tiger‑tec Gold, for stainless steel, Walter Tools The TS16-ER11.5NPT WMP32G is an indexable turning insert engineered for secure chip formation and robust cutting-edge performance in medium to heavy-duty machining of stainless steel. Tiger‑tec Gold coated carbide grade Optimised ER11.5NPT chipbreaker for chip control Suitable for ISO group M stainless steel Increased productivity through consistent chip formation The combination of the WMP32G grade and the Tiger‑tec Gold coating is designed for stable cutting under the thermal and mechanical demands of machining stainless steel. The coating reduces flank wear while promoting repeatable cutting-edge behaviour, which translates into fewer downtime intervals for insert changes. The ER11.5NPT chipbreaker is shaped to break long, ductile chips typically produced from stainless steel into manageable segments, supporting uninterrupted swarf evacuation and reducing the risk of built-up edge. For production environments, this means improved cycle-time reproducibility and a lower probability of tool-related stoppages. Safer machining of stainless steel with tailored geometry Materials in the ISO M group are prone to work-hardening and produce stringy chips that retain heat at the cutting zone. The insert’s geometry, combined with the specified chipbreaker, encourages a controlled shearing action and stable chip curl. This reduces heat concentration at the cutting edge and limits surface tearing on the workpiece, resulting in better surface quality and reduced need for secondary finishing. The grade’s composition supports a consistent contact zone between tool and part, which aids machinists and process engineers in achieving predictable results across serial production runs. Clear economic advantages through longer tool life The coated carbide composition of this insert is selected to balance wear resistance and toughness under intermittent loads. Where machining conditions are listed as medium to robust, the WMP32G grade provides a tangible extension of tool life compared with uncoated grades, lowering tooling consumption and contributing to a better total-cost-of-operation. The insert’s repeatable edge performance makes tool management and inventory planning more straightforward, helping maintenance and production planners forecast insert replacement intervals with greater confidence. Easy integration into turning operations and process security Marked as a TS16 style insert, the component is compatible with holders designed for that designation, enabling quick indexing and minimal set-up time. The clear labelling and standardised geometry support straightforward tool selection for turning centres and turret systems. With Walter Tools manufacturing standards behind the grade, the insert supports process security in batch production and jobbing alike, permitting machinists to rely on consistent cutting behaviour without prolonged trial-and-error on the shop floor. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger‑tec Gold inserts or to arrange procurement of the TS16-ER11.5NPT WMP32G; eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930 Technical Data Article number: TS16-ER11.5NPT-WMP32G-WALTER Designation: TS16-ER11.5NPT WMP32G Series: Tiger‑tec Gold Grade: WMP32G Chipbreaker: ER11.5NPT Facts ISO material group: M (stainless steel) Material base: coated carbide Product type: indexable turning insert SKU: TS16-ER11.5NPT-WMP32G-WALTER Special features Coating: Tiger‑tec Gold Optimised for stable chip control Intended for medium to robust cutting conditions Manufacturer: Walter Tools FAQ What materials is this insert intended for? The TS16-ER11.5NPT WMP32G is intended primarily for machining stainless steel (ISO group M), offering controlled chip formation and thermal resistance suited to those alloys. How does the ER11.5NPT chipbreaker improve machining? The ER11.5NPT chipbreaker shapes and segments chips produced during turning, reducing long, stringy swarf and supporting safer evacuations and improved process stability with the Walter Tools grade. Is the WMP32G grade suitable for continuous production? Yes, the WMP32G grade, with Tiger‑tec Gold coating, is formulated to provide repeatable edge life and wear resistance under continuous and batch-production scenarios. Can this insert reduce the need for secondary finishing? By promoting stable shearing and reduced built-up edge when cutting stainless steel, the insert can lead to improved surface finishes and a lower requirement for additional finishing steps. How is the insert integrated into existing toolholders? The TS16 designation indicates compatibility with holders that accept TS16-style indexable inserts, enabling straightforward insertion and quick indexing during tool changes. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-ER11.5NPT-F5 WMP32G Wendeplatten - Walter Tools
Benefit from the combination of the WMP32G grade and the Tiger·tec Gold coating for longer tool life and secure chip formation when machining rostfreier Stahl; the integrated chipbreaker reduces cycle interruptions and stabilises surface quality. Order the TS16-ER11.5NPT-F5 WMP32G directly via Metav Werkzeuge or contact our consultants for tailored cutting data. TS16-ER11.5NPT-F5 WMP32G — turning indexable insert, Tiger·tec Gold coating, for rostfreier Stahl (Walter Tools) TS16-ER11.5NPT-F5 WMP32G is a turning indexable insert designed for medium to robust machining tasks on rostfreier Stahl, offering reliable edge stability and consistent chip control in production environments Tiger·tec Gold coating for extended tool life Optimised chipbreaker ER11.5NPT-F5 for chip control Tailored for rostfreier Stahl machining Stable cutting edge for consistent surface finish Reliable machining of rostfreier Stahl with advanced coating technology The combination of the WMP32G carbide grade and the Tiger·tec Gold coating provides a balanced response to the high demands of rostfreier Stahl machining. Coated for enhanced thermal stability and wear resistance, this indexable insert reduces the tendency for built-up edge and supports consistent cutting forces over longer cycles. For workshops aiming to improve uptime, the result is fewer unscheduled tool changes and a predictable component quality under medium to robust cutting conditions. Efficient chip control to sustain cycle times and surface quality The ER11.5NPT-F5 chipbreaker geometry is engineered for secure chip formation when machining ductile, heat-generating materials. This design promotes short, controllable chips and reduces the risk of entanglement or re-cutting, maintaining process stability. As a consequence, machining operations experience reduced stoppages and improved surface integrity, which supports tighter production tolerances and fewer downstream rework steps. Productivity and repeatability for modern turning shops With a focus on repeatable performance, the insert’s stable cutting edge and robust substrate help to extend tool life and maintain consistent part finish across batches. The overall design minimises vibration susceptibility and contributes to dimensional accuracy, making the insert suitable for both series production and demanding single-part runs. Technical support and cutting recommendations are available for optimising feeds and speeds for specific rostfreier Stahl grades. For reliable rostfreier Stahl turning with Walter Tools’ Tiger·tec Gold technology, request the TS16-ER11.5NPT-F5 WMP32G via Metav Werkzeuge for tailored machining recommendations and supply options. Technical Data SKU: TS16-ER11.5NPT-F5-WMP32G-WALTER Article: turning indexable insert Grade: WMP32G Series: Tiger·tec Gold Manufacturer: Walter Tools Facts Material group: M (rostfreie Stähle) Chipbreaker: ER11.5NPT-F5 Coating technology: Tiger·tec Gold Special features Coated carbide grade for thermal and wear resistance Optimised chip control for ductile materials Designed for medium to robust cutting conditions Application focus: rostfreier Stahl machining FAQ What materials is this insert best suited for? This insert is optimised for machining rostfreier Stahl; the WMP32G grade and Tiger·tec Gold coating support secure chip formation and consistent cutting behaviour on these materials. How does the ER11.5NPT-F5 chipbreaker affect performance? The ER11.5NPT-F5 chipbreaker creates short, manageable chips and stabilises the cutting process, which reduces downtime and helps to maintain a consistent surface finish. Is this insert a good choice for series production? Yes. The combination of a coated substrate and a stable cutting edge delivers repeatable tool life and dimensional consistency suited to series production demands. Can this grade handle tougher rostfreier Stahl conditions? WMP32G is designed for medium to robust conditions on rostfreier Stahl; for very abrasive or highly hardened workpieces, specialised grades may be considered. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanatory purposes and do not imply any affiliation between our company and the trademark owners. The offered item is an original, factory-new product of Walter Tools.
TS16-ER11.5NPTF WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold wear resistance, reliable WMP32G chip control and extended tool life for productive stainless steel turning; order the insert directly via Metav Werkzeuge or consult the team for application support. TS16-ER11.5NPTF WMP32G indexable turning insert with Tiger·tec Gold coating for stainless steel — Walter Tools The TS16-ER11.5NPTF WMP32G is an indexable turning insert designed for stable performance in stainless steel machining, combining a dedicated chipbreaker with a high-wear resistance grade for demanding production environments Tiger·tec Gold coating for enhanced wear resistance WMP32G grade optimised for stainless steel ER11.5NPTF chipbreaker for stable chip control Consistent edge life and dimensional stability Longer tool life through advanced coating technology The combination of Tiger·tec Gold coating and the WMP32G grade delivers a clearly increased resistance to abrasion and built-up edge when machining stainless steels. Coated cemented carbide reduces flank wear and supports a predictable wear pattern, which in turn extends tool life and lowers regrinding or replacement frequency. For production planners this means fewer tool changes and more consistent part quality across longer shifts, while operators benefit from improved process reliability and fewer interruptions due to edge failure. Stable chip formation and improved process reliability The ER11.5NPTF chipbreaker geometry has been developed to promote controlled chip evacuation and minimise snarling when working with tough, ductile materials. This results in chip control that reduces cycle-time variability and lowers the risk of surface damage or machine stoppages. In automated turning centres, stable chip behaviour helps maintain cutting forces within expected ranges and supports reproducible surface finishes, aiding in meeting batch tolerances and reducing downstream inspection rejects. Practical integration and application guidance for production The insert designation TS16-ER11.5NPTF corresponds to a geometry that fits standard toolholders for indexable turning operations; setup focuses on optimising feeds and speeds for stainless steel to avoid thermal softening and to encourage favourable chip formation. For machining strategies, moderate cutting speeds paired with suitable coolant practices often provide the best compromise between productivity and edge life. If process parameter adaptation is required, Metav Werkzeuge offers application advice to match toolholders and machining conditions to the TS16-ER11.5NPTF insert, ensuring the grade and chipbreaker deliver consistent results on the shop floor. For stainless steel turning tasks where reliable chip control and long wear life matter, choose the Walter Tools Tiger·tec Gold WMP32G solution — contact Metav Werkzeuge for personalised technical advice or to order the TS16-ER11.5NPTF insert directly via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: TS16-ER11.5NPTF-WMP32G-WALTER ISO designation: TS16-ER11.5NPTF WMP32G Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER11.5NPTF Material group: M (rostfreier Stahl application true) Facts Coating: Tiger·tec Gold Base material: Coated cemented carbide Suitable for: rostfreier Stahl Designation (short): TS16-ER11.5NPTF SKU: TS16-ER11.5NPTF-WMP32G-WALTER Special features Stable chip formation for stainless steels Reduced susceptibility to built-up edge Optimised for medium to robust machining conditions Consistent edge life and dimensional stability Manufacturer: Walter Tools FAQ What materials is this insert optimised for? The TS16-ER11.5NPTF WMP32G insert is optimised for stainless steel applications; the WMP32G grade supports secure chip formation when machining these materials. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WMP32G grade improves wear resistance and reduces flank wear, contributing to longer tool life and more consistent part quality in series machining. Which chipbreaker should be selected for ductile stainless steels? The ER11.5NPTF chipbreaker featured on this insert is designed to promote stable chip control when turning ductile stainless steels, lowering the risk of chip-related interruptions. Is this insert suitable for automated turning centres? Yes, the geometry and grade of the TS16-ER11.5NPTF insert support process stability and predictable tool life, making it suitable for use in automated turning centres where reproducibility is required. Are there recommendations for cutting parameters? For stainless steel, moderate cutting speeds combined with appropriate feeds and coolant use are recommended to balance tool life and surface finish when using the TS16-ER11.5NPTF insert Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original and factory-new from the manufacturer.
TS16-ER11BSPT WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger·tec Gold coating and the WMP32G carbide grade for reliable machining of stainless steel, improved tool life and consistent chip control; order directly via Metav Werkzeuge or consult the product specialists for application-specific guidance. TS16-ER11BSPT WMP32G indexable turning insert — Tiger·tec Gold coating, for stainless steel, Walter Tools An TS16-ER11BSPT WMP32G indexable insert engineered for secure chip formation and robust performance in medium to heavy turning of stainless steel. Tiger·tec Gold coating for high process security Optimised ER11BSPT chipformer for stable chips WMP32G grade for stainless steel machining Robust, coated carbide for extended tool life Consistent process security for stainless-steel turning The combination of Tiger·tec Gold coating and the WMP32G grade delivers a focused improvement in thermal and mechanical stability when turning stainless steel. The deposit-style coating reduces friction at the cutting edge and supports steady cutting temperatures, which minimises edge build-up and the risk of unexpected tool failure. This results in higher machine uptime and fewer interruptions in production, particularly under the moderate to robust cutting conditions for which this insert was developed. Stable chip control that sustains cycle times The dedicated ER11BSPT chipformer is designed to promote predictable chip breakage and evacuation. By shaping chips into controllable segments, the geometry reduces the likelihood of entanglement and tool interference, supporting uninterrupted feeding and reliable cycle times. For workshop planners this means lower scrap rates and smoother downstream handling without complex fixture changes. Coating and grade explained for process planners The WMP32G designation indicates a coated carbide grade optimised for stainless steel; it balances toughness and wear resistance to handle the material’s tendency to gall and generate heat. The Tiger·tec Gold technology is a multi-layer coating approach that combines wear resistance with thermal shielding. In practical terms, this reduces the frequency of insert changes and contributes to predictable part tolerances over longer tool life. Economic and integration benefits on the shop floor Using a dedicated insert such as this one reduces setup complexity and supports consistent throughput. The insert’s geometry and coating synergy lower the need for trial-and-error parameter tuning, enabling faster process approval and repeatable quality. For procurement and production managers, the result is a measurable benefit in resource allocation: fewer tool changes, reduced tool inventory variation and more consistent production output. Contact Metav Werkzeuge today for tailored advice on integrating Tiger·tec Gold inserts like the TS16-ER11BSPT WMP32G into existing workflows and to request cutting data for specific stainless steel grades; 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 Technical Data Article number: TS16-ER11BSPT-WMP32G-WALTER Product: TS16-ER11BSPT WMP32G Brand: Walter Tools Core specifications Material group: M (stainless steel) Grade: WMP32G Chipformer: ER11BSPT Special features Coating technology: Tiger·tec Gold Product type: indexable turning insert Suitable for: stainless steel FAQ What materials is this insert suited for? The TS16-ER11BSPT WMP32G insert is qualified for machining stainless steel; the grade and coating are selected to address stainless-steel challenges. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold on the WMP32G grade reduces friction and thermal load, which helps to maintain a stable cutting edge and extends the insert’s service life. What is the purpose of the ER11BSPT chipformer? The ER11BSPT chipformer promotes predictable chip segmentation and evacuation, reducing the risk of chip entangling and improving process reliability. Can this insert be used in medium and heavy finishing feeds? WMP32G is designed for medium to robust cutting conditions in stainless steel and offers a balance of toughness and wear resistance suitable for those applications. Which toolholders are compatible with the TS16-ER11BSPT designation? Toolholders that accept the TS16-ER11BSPT ISO designation and provide secure clamping of the indexable insert are required; holders should match the insert geometry and clamping type. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners and are mentioned for explanation only. There is no affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, factory-new product of the manufacturer.
TS16-ER11UN WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WMP32G grade and the ER11UN chipbreaker to achieve reliable, repeatable performance when machining rostfreier Stahl; order directly via Metav Werkzeuge or consult the technical team for process data and application advice. TS16-ER11UN WMP32G – indexable turning insert, Tiger‑tec Gold, for rostfreier Stahl (Walter Tools) A TS16-ER11UN WMP32G indexable insert engineered for turning operations on rostfreier Stahl, offering a coated‑carbide grade optimised for medium to robust cutting conditions and designed to support stable chip formation and edge life. Tiger‑tec Gold coating for wear resistance Optimised for rostfreier Stahl (M group) ER11UN chipbreaker for stable chip control Improve process reliability when turning rostfreier Stahl The combination of the WMP32G grade and Tiger‑tec Gold coating delivers enhanced edge stability under the elevated temperatures and adhesive tendencies typical of rostfreier Stahl. The insert’s geometry and ER11UN chipbreaker work together to promote predictable chip formation, reducing the risk of built‑up edge and unplanned tool changes. For production environments that demand consistent cycle times, this results in fewer interruptions and more reliable component tolerances, particularly in medium to robust machining scenarios. Achieve better surface finish with prolonged tool life A coated carbide grade developed for demanding stainless‑steel applications helps maintain a sharp cutting edge for longer periods, translating into improved surface quality and fewer rework operations. The Tiger‑tec Gold treatment supports thermal stability and wear resistance, so the insert sustains performance over extended runs. Where class‑leading finish and uptime are priorities, the insert’s properties reduce tool‑handling events and contribute to predictable tool‑life planning. Integrate easily and predict process outcomes The insert format follows common turning standards, enabling straightforward integration into existing toolholders and turning strategies. Its specification supports process engineers in defining stable cutting windows for rostfreier Stahl, and the consistent behaviour of the grade simplifies standardisation across batches. For operations transitioning from a trial setup to serial production, the combination of proven coating technology and chip control offers dependable results and aids reproducible machining parameters. Discuss application requirements or request tailored cutting data for the Walter Tools TS16-ER11UN WMP32G via Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: TS16-ER11UN-WMP32G-WALTER Designation: TS16-ER11UN WMP32G Product type: Indexable turning insert Manufacturer: Walter Tools Facts Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: ER11UN Material group: M Special features Coated carbide (beschichtetes Hartmetall) Optimised for medium to robust cutting conditions Suitable for rostfreier Stahl Stable chip formation and edge stability FAQ What materials is this insert designed for? The TS16-ER11UN WMP32G is designed primarily for rostfreier Stahl (material group M), where the coated WMP32G grade helps control adhesion and heat during turning. Which chip control can be expected from the ER11UN geometry? The ER11UN chipbreaker promotes consistent chip formation and evacuation, supporting stable cutting forces and fewer interruptions in turning operations with rostfreier Stahl. Is this insert suitable for high‑volume production runs? Yes; the combination of Tiger‑tec Gold coating and the WMP32G grade offers wear resistance and thermal stability that support longer tool life and reproducible results in serial production. How does the coating influence surface finish? The Tiger‑tec Gold coating improves thermal resistance and reduces flank wear, which contributes to a more consistent surface finish and fewer rework cycles when machining rostfreier Stahl. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, brand‑new product from the manufacturer.
TS16-ER11W WMP22G WMP22G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WMP22G grade for secure chip control and extended tool life when machining rostfreier Stahl; order the insert directly via Metav Werkzeuge or consult our specialists for cutting-data recommendations. TS16-ER11W WMP22G – Indexable turning insert for rostfreier Stahl, Tiger‑tec Gold (Walter Tools) The TS16-ER11W WMP22G is an indexable turning insert from the Tiger‑tec Gold series, engineered to provide consistent chip formation and reliable cutting-edge stability when machining rostfreier Stahl under medium to robust conditions. Tiger‑tec Gold coating for long life WMP22G grade for rostfreier Stahl machining Stable chip control under medium to heavy cuts Coated carbide for reliable cutting edges Consistent productivity through a specialised grade and coating The Tiger‑tec Gold technology paired with the WMP22G grade delivers a combination of wear resistance and thermal stability that is particularly valuable when machining rostfreier Stahl. The insert’s coated carbide substrate reduces edge degradation and supports predictable tool behaviour, which lowers the frequency of tool changes and increases machine uptime. For production environments where repeatability matters, this engineered pairing improves process control and reduces scrap rates. Proven edge stability that reduces cycle-time variability A stable cutting edge translates directly into fewer interruptions and more consistent dimensional results. The insert’s design focuses on stable cutting-edge performance under the thermal and adhesive tendencies of rostfreier Stahl, helping to avoid built-up edge and premature wear. This technical reliability supports a better cost-to-performance ratio by extending tool life and smoothing batch production, making the tool a pragmatic choice for demanding turning operations. Better chip control for safer, more efficient turning The ER11W chipbreaker geometry is optimised for secure chip formation when taking medium to heavy cuts in tough materials, which enhances both process safety and surface quality. By producing controlled chips, the insert reduces the risk of entanglement and tool interference, improving operator confidence and downstream handling. The result is a machining cycle that is both more predictable and less labour intensive, supporting higher throughput in mixed-production shops. Clear guidance on material range and intended use The designation M indicates suitability for rostfreier Stahl, which encompasses alloys that are prone to toughness and heat-induced adhesion at the cutting edge. The coated carbide and Tiger‑tec Gold technology are selected to counter these effects, promoting safer chip evacuation and consistent surface finish. For integration, the insert follows the TS16 geometry and is intended for holders designed for that standard; matching the insert to a compatible toolholder ensures the expected performance. For precision turning of rostfreier Stahl, specify the Walter Tools TS16-ER11W WMP22G with Metav Werkzeuge and request tailored cutting-data advice from our consultants at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: TS16-ER11W-WMP22G-WALTER Article label: Drehwendeschneidplatte TS16-ER11W WMP22G Walter Tools Product type: Indexable turning insert Manufacturer: Walter Tools Facts Material code: M Series: Tiger‑tec Gold Grade: WMP22G Chipbreaker: ER11W ISO designation: TS16-ER11W WMP22G Rostfreier Stahl application: yes Special features Coated carbide substrate Optimised for stable chip formation Designed for medium to robust cutting conditions Suited to TS16 toolholder geometry FAQ Is this insert suitable for machining rostfreier Stahl? Yes. The TS16-ER11W WMP22G is formulated for rostfreier Stahl (material group M), offering coating and grade properties that promote secure chip formation and reduced edge build-up. What are the benefits of the Tiger‑tec Gold coating? Tiger‑tec Gold enhances thermal and wear resistance on the TS16-ER11W WMP22G, resulting in longer cutting-edge life and improved process reliability when working with challenging alloys. How does the ER11W chipbreaker affect machining? The ER11W chipbreaker on this insert controls chip shape and evacuation for medium to heavy cuts, improving safety, surface quality and consistency during turning operations. Will the TS16-ER11W fit standard toolholders? The insert follows the TS16 geometry and is compatible with toolholders designed for TS16 inserts; correct seating and clamping are essential for achieving the specified performance. Walter Tools (Walter Deutschland GmbH), Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation; no affiliation between Metav Werkzeuge and the brand owners is implied. The offered item is an original, factory-new product of the manufacturer.
TS16-ER11W WMP32G Wendeplatten - Walter Tools
High wear resistance and stable chip formation from the Tiger·tec Gold grade combined with the ER11W chipbreaker deliver consistent machining of stainless steel under medium to robust conditions; enjoy extended tool life and reliable surface quality — order the TS16-ER11W WMP32G directly via Metav Werkzeuge or ask the consultants for technical advice. TS16-ER11W WMP32G indexable turning insert, Tiger·tec Gold coating — Walter Tools TS16-ER11W WMP32G is an indexable turning insert designed for productive machining of stainless steel in medium to robust cutting conditions Tiger·tec Gold coating for long tool life Optimised chip control ER11W chipbreaker Designed for stainless steel (ISO group M) Stable cutting edge for robust applications Consistent performance with Tiger·tec Gold for stainless steel The Tiger·tec Gold technology, represented by the WMP32G grade, is a coated carbide solution engineered to improve wear resistance and maintain a sharp cutting edge under the typical demands of stainless steel machining. The coating system reduces adhesion and heat transfer at the cutting zone, which supports stable chip formation and lowers the risk of built-up edge. In practice this means extended tool life and fewer interruptions for insert changes, contributing to a more predictable production flow and lower running costs per component. Reliable chip control and improved surface quality Equipped with the ER11W chipbreaker, this insert provides controlled chip splitting and evacuation, which mitigates long, stringy chips and reduces tangling in turning operations. Controlled chips decrease the incidence of surface defects and support a better surface finish with fewer downstream finishing steps. The chip geometry is optimised for the toughness and heat characteristics of stainless steel, so process stability is improved and tool-related rework is reduced, increasing overall shop-floor productivity. Practical guidance for application and productivity The insert is intended for machining tasks classified under ISO group M and is suitable for medium to more demanding turning operations where a robust edge and consistent performance are required. As an indexable insert, it is compatible with standard toolholders that accept the TS16-ER11W form and can be integrated into multi-insert tool systems for higher output. The TS16-ER11W WMP32G is particularly useful in jobbing and series production where reproducible results and low tool-change frequency are priorities; technical clarification can be provided by Metav Werkzeuge for optimised tool setups and cutting data For high-demand stainless steel turning with Tiger·tec Gold performance, request availability and tailored technical advice from Metav Werkzeuge to ensure the correct tooling combination and fast supply Technical data Article number: TS16-ER11W-WMP32G-WALTER Designation: TS16-ER11W WMP32G Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: ER11W Manufacturer: Walter Tools Facts No numerical data available Special features Suitability: stainless steel (ISO group M) Coating / grade: coated carbide (Tiger·tec Gold technology) Product type: Indexable turning insert ISO designation: TS16-ER11W WMP32G FAQ What materials is this insert designed for? The TS16-ER11W WMP32G is formulated for machining stainless steel (ISO group M), where toughness and heat resistance are critical factors. What benefit does the Tiger·tec Gold grade provide? Tiger·tec Gold, as used in the WMP32G grade, increases wear resistance and reduces adhesion on the cutting edge, which helps to prolong insert life and maintain consistent performance. How does the ER11W chipbreaker affect machining? The ER11W chipbreaker promotes controlled chip formation and reliable evacuation, improving process stability and the resulting surface finish when turning stainless steel. Is this insert suitable for series production? Yes, the combination of the WMP32G grade and ER11W chipbreaker makes the insert well suited for series production where repeatable results and low downtime are required. Which toolholders are compatible with this ISO designation? Toolholders that accept the TS16-ER11W form are compatible; Metav Werkzeuge can advise on specific toolholder matches and recommended cutting conditions for optimal performance. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Brand names and trademarks are mentioned for explanatory purposes only and do not indicate any affiliation with our company. The offered item is an original factory-new product of the manufacturer.
TS16-ER11W-F5 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for reliable stainless-steel turning, offering stable chip formation and consistent edge life; order directly via Metav Werkzeuge or contact the consultants for application support. TS16-ER11W-F5 WMP32G turning insert (Tiger·tec Gold) for stainless steel — Walter Tools The TS16-ER11W-F5 WMP32G is a coated turning insert engineered for secure, productive machining of stainless steels in moderate to robust cutting conditions. Tiger·tec Gold coating technology Optimised for stainless steels (M) Stable chip formation with ER11W-F5 Coated carbide grade WMP32G Reliable process security for stainless-steel turning The combination of Tiger·tec Gold coating and the WMP32G grade ensures high process reliability when machining stainless steels. The coated carbide composition reduces friction and supports a secure cutting edge under challenging conditions where material stickiness and heat buildup are common. This results in fewer interruptions for edge corrections and more predictable component quality over extended production runs. Consistent chip control and reduced built‑up edge The ER11W-F5 chipbreaker is designed to promote stable chip formation, which lowers the risk of built‑up edge and improves surface finish consistency. By guiding chips away from the cutting zone and encouraging short, controllable chip shapes, the insert reduces the likelihood of tool-induced marks and protects the workpiece integrity, particularly on austenitic stainless grades that tend to form long or gummy chips. Improved productivity through tool-life and stability A coated carbide grade tailored to stainless steels supports longer edge life and steady performance across varying feeds and depths of cut. The engineering behind the insert focuses on maintaining a robust cutting edge, which reduces tool change frequency and contributes to a smoother production flow. For operations seeking repeatability and fewer process variances, this insert offers measurable gains in machining uptime. Practical use and integration in the workshop The insert’s designation and geometry make it suitable for standard turning toolholders and common clamping systems. Mounting and indexation follow established workshop routines for turning inserts, enabling quick replacement and orientation changes to renew the cutting edge with minimal downtime. As part of Walter Tools’ portfolio, the component benefits from the manufacturer’s emphasis on precision tooling and edge stability, supporting predictable results in everyday production. For machining stainless steel with a focus on edge stability and process reliability, choose the Walter Tools Tiger·tec Gold WMP32G solution and contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: TS16-ER11W-F5-WMP32G-WALTER Name: Drehwendeschneidplatte TS16-ER11W-F5 WMP32G Walter Tools Product type: Turning insert Core data Grade: WMP32G Coating technology: Tiger·tec Gold Chipbreaker: ER11W-F5 Materials & features For stainless steels (M) Coated carbide Stable chip formation, optimised for moderate to robust conditions FAQ What materials is this insert intended for? The insert is intended for stainless steels (material group M) and the WMP32G grade with Tiger·tec Gold coating is tuned to handle the toughness and heat sensitivity of these alloys. How does the ER11W‑F5 chipbreaker benefit production? The ER11W-F5 chipbreaker produces short, controllable chips that reduce the risk of built‑up edge and improve surface finish stability during stainless‑steel turning. Is this insert compatible with standard turning holders? Yes, the insert follows common indexable insert geometries and is compatible with standard turning toolholder systems used for this insert type. Can the insert maintain performance under robust cutting conditions? The coated WMP32G carbide grade and Tiger·tec Gold technology are developed to sustain performance in moderate to robust conditions, offering stable cutting edges and extended tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the brands named. The item offered is an original, factory‑new product of the manufacturer.
TS16-ER12ACME WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold wear resistance and optimised ER12ACME chip control for reliable turning of stainless steel; the insert delivers consistent cutting-edge stability and predictable tool life. Order the insert directly via Metav Werkzeuge or request technical advice from our consultants. TS16-ER12ACME WMP32G – Indexable turning insert, Tiger‑tec Gold (Walter Tools) A TS16-ER12ACME WMP32G indexable turning insert engineered for secure and productive machining of stainless steel in medium to robust conditions Tiger‑tec Gold coating for extended tool life ER12ACME chipbreaker for stable chip control Optimised for stainless steel machining Consistent cutting performance for demanding stainless steel work The combination of the Tiger‑tec Gold coating and the WMP32G grade provides enhanced wear resistance and reduced tendency for built-up edge when machining austenitic and other stainless steels. The applied coating technology improves heat management at the cutting zone, which leads to a more stable cutting edge and fewer unplanned tool changes. For machining shops working to tight tolerances, this results in steadier cycle times and improved surface consistency on turned components. Reliable chip control that reduces downtime and rejects The ER12ACME chipbreaker geometry is designed to produce predictable chips in a wide range of stainless steel alloys under medium to robust cutting conditions. Controlled chip formation prevents tangling and facilitates safe evacuation, which reduces the risk of part damage and operator interruption. The insert’s coated carbide construction also contributes to sustained edge integrity over longer engagement periods, supporting continuous production and higher overall productivity. Practical integration into production and straightforward handling The insert’s ISO designation and format make it compatible with standard toolholders and turning stations, enabling quick indexing and minimal set-up time. Its design supports repeatable seating and accurate orientation, which simplifies tool management across batches. For workshop planners and production managers, the mix of process security and consistent tool life delivers measurable operational benefits, such as fewer tool regrinds and more predictable maintenance intervals. For dependable stainless steel turning with Tiger‑tec Gold, contact Metav Werkzeuge for availability and technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TS16-ER12ACME-WMP32G-WALTER Designation: TS16-ER12ACME WMP32G Type: Indexable turning insert Brand: Walter Tools Facts Material group: M (stainless steel) Coating/series: Tiger‑tec Gold Grade: WMP32G Chipbreaker: ER12ACME Special features Coated cemented carbide (coated hardmetal) Suited to stainless steel machining Designed for medium to robust cutting conditions ISO-style indexable insert format FAQ What materials is this insert designed for? The TS16-ER12ACME WMP32G is developed primarily for stainless steel applications; the WMP32G grade supports safe chip formation when machining tougher, heat‑sensitive stainless alloys. How does the Tiger‑tec Gold coating benefit machining? The Tiger‑tec Gold coating on this WMP32G grade improves heat resistance and wear resistance, which helps maintain a stable cutting edge and extends the effective tool life during continuous turning operations. What role does the ER12ACME chipbreaker play? The ER12ACME chipbreaker ensures controlled chip fragmentation and evacuation in a variety of stainless steel conditions, reducing the likelihood of chip entanglement and interruptions on the shop floor. Is the insert compatible with standard toolholders? Yes, the TS16-ER12ACME format follows common ISO indexable insert conventions and is compatible with matching toolholders designed for this insert geometry. Can this insert be used for light finishing passes? The WMP32G grade is versatile enough to perform both robust roughing and stable finishing passes on many stainless steel components, delivering consistent surface quality when cutting parameters are correctly set. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-ER12BUT WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and the ER12BUT chipbreaker for secure chip formation in stainless steel machining; order the insert directly via Metav Werkzeuge or ask the consultants for application-specific recommendations. TS16-ER12BUT WMP32G indexable turning insert — Tiger·tec Gold grade for stainless steel | Walter Tools The TS16-ER12BUT WMP32G is an indexable turning insert engineered for robust chip control and reliable edge stability in rostfreier Stahl (ISO group M) turning applications. Tiger·tec Gold coated grade WMP32G Optimised ER12BUT chipbreaker Designed for stainless steel machining Stable chip control for demanding stainless workpieces The combination of the ER12BUT chipbreaker and the WMP32G grade delivers consistent chip formation, reducing the risk of built-up edge and chatter when machining rostfreier Stahl. The chip geometry is developed to evacuate long, stringy chips typical of tough, ductile stainless alloys; this results in fewer interruptions, reduced rework and a steadier turning process. For production environments where repeatability matters, the insert supports predictable material removal and simplified post-process handling. Coated carbide for longer tool life and process security The Tiger·tec Gold technology provides a multilayer coating system optimised for heat management and wear resistance on coated cemented carbide. This means the cutting edge retains its integrity under elevated temperatures that occur when machining stainless steel, extending tool life and maintaining surface quality over longer tool cycles. The insert’s coated substrate supports higher cutting speeds and stable cutting conditions, which contributes to improved productivity and lower unit cost per component in serial production. Practical integration and measurable workshop benefits As an indexable insert with the ISO designation TS16-ER12BUT WMP32G, the component is easy to fit into common turning holders and to index when an edge change is required. The grade’s balance between toughness and wear resistance reduces unexpected interruptions and eases process planning; fewer tool changes mean higher machine utilisation. For small and medium batches as well as continuous production, the insert’s predictable behaviour under mids to robust cutting conditions supports tighter scheduling and easier process standardisation. For reliable rostfreier Stahl turning with Tiger·tec Gold performance, contact Metav Werkzeuge to specify TS16-ER12BUT WMP32G inserts from Walter Tools and ensure the optimum chipbreaker and grade are chosen for the application. Technical Data Article number: TS16-ER12BUT-WMP32G-WALTER Product type: Indexable turning insert ISO designation: TS16-ER12BUT WMP32G Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER12BUT Application group: M (rostfreie Stähle) Manufacturer: Walter Tools Data UID: TS16-ER12BUT-WMP32G-WALTER No further numeric specifications provided Special features Coating technology: Tiger·tec Gold Carbide type: Coated cemented carbide (WMP32G) Optimised chip control for stainless steel Suitable for medium to robust cutting conditions FAQ What materials is this insert suited to? The TS16-ER12BUT WMP32G insert is designed primarily for rostfreier Stahl (ISO group M); the WMP32G grade and ER12BUT chipbreaker support secure chip formation in stainless alloys. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold provides enhanced heat resistance and wear protection on the WMP32G coated carbide, which helps maintain edge stability and extend tool life during continuous turning of stainless steel. Can this insert be used with standard turning holders? Yes, the TS16-ER12BUT WMP32G conforms to common ISO insert geometries for turning and can be integrated into compatible holders; indexing the insert restores cutting performance quickly. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter brand and related trademarks are the property of their respective owners. Protected trademarks and product names are used solely for identification and explanation. There is no affiliation between our company and the trademark owners. The offered article is an original, factory-new product from the manufacturer.
TS16-ER12UN WMP22G Wendeplatten - Walter Tools
Take advantage of the Tiger-tec Gold coating and the WMP22G grade for consistent chip formation and extended tool life; the ER12UN chipformer ensures secure machining of stainless steels. Order the TS16-ER12UN WMP22G insert directly via Metav Werkzeuge or consult our advisors for process-specific recommendations. TS16-ER12UN WMP22G — indexable turning insert for stainless steels — Walter Tools TS16-ER12UN WMP22G is an indexable turning insert designed for reliable machining of stainless steels under medium to robust conditions. Tiger·tec Gold coated carbide grade WMP22G Optimised for rostfreie Stähle machining ER12UN chipformer for stable chip control Higher throughput on stainless steels thanks to optimised grade and coating The combination of the WMP22G grade with the Tiger·tec Gold coating provides a balanced performance profile that addresses the specific challenges of stainless steels: adhesiveness, increased heat generation and difficult chip breakage. The coated carbide substrate reduces friction at the cutting edge and supports a secure cutting process that helps to maintain surface quality while allowing efficient feed rates. For operations where predictable tool behaviour matters, this insert offers measurable improvements in process stability and piece-to-piece consistency. Secure chip formation and prolonged tool life with ER12UN geometry Equipped with the ER12UN chipformer, the insert ensures repeatable chip control across a range of turning operations. Stable chip formation prevents built-up edge and reduces the risk of surface damage on the workpiece, translating into fewer rejects and less rework. The geometry works in concert with the coated grade to extend tool life under intermittent and continuous cuts, which supports a lower cost per part and better overall productivity in series production. Practical integration into workshop processes and setup The insert follows established ISO indexing conventions and is compatible with common tool holders for indexable turning. Its designation and dimensions adhere to industry standards, facilitating quick selection and replacement during tool changes. The combination of a robust grade and a proven chipbreaker reduces the need for frequent process adjustments, allowing machine time to be used more effectively and easing the planning of maintenance intervals. Clear technical rationale and application guidance For customers with limited metallurgical background, the insert’s suitability for group M (stainless steels) means it is intended for materials that demand heat-resistant cutting edges and consistent chip evacuation. The coated carbide construction provides thermal resilience, while the chipbreaker geometry actively shapes chips to avoid tangling or clogging. When paired with appropriate cutting parameters and coolant strategies, the insert supports efficient machining with reproducible surface finishes and tolerances. Contact Metav Werkzeuge for tailored application advice and to procure the Walter Tools TS16-ER12UN WMP22G insert; our technical consultants provide process optimisation and availability information at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: TS16-ER12UN-WMP22G-WALTER Designation: TS16-ER12UN WMP22G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WMP22G Chipformer: ER12UN Material group: M (stainless steels) Core specifications Indexable turning insert designation TS16 Suitable for ISO group M materials Coated carbide grade Special features Coating technology: Tiger·tec Gold Optimised for stable chip formation Intended use: machining of rostfreier Stahl Robust performance under medium to heavy conditions Proven grade for improved tool life and surface quality FAQ What materials is this insert designed for? The TS16-ER12UN WMP22G insert is optimised for stainless steels (ISO group M), offering secure chip control and thermal resistance for such materials. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WMP22G grade reduces friction and improves wear resistance, which helps the insert maintain a stable cutting edge and extend tool life during stainless steel turning. Is the ER12UN chipformer suitable for finishing cuts? The ER12UN chipformer provides controlled chip formation that benefits both medium and finishing operations by lowering the risk of built-up edge and preserving surface integrity. Can this insert be used in existing tool holders? The insert follows common ISO indexable insert conventions and can be integrated into standard turning tool holders compatible with the TS16 designation. What production advantages does this insert offer? By combining a specialised grade and proven chip geometry, the insert supports process stability, reduced downtime for tool changes and improved first-pass quality in serial production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, factory-new merchandise from the manufacturer.
TS16-ER12UN WMP32G Wendeplatten - Walter Tools
Benefit from a combination of the Tiger·tec Gold coating, the WMP32G grade and the ER12UN chipbreaker to achieve stable, productive stainless‑steel turning with reduced edge wear and reliable chip formation. Order the TS16-ER12UN WMP32G indexable insert directly via Metav Werkzeuge or consult the technical advisors for process-specific recommendations. TS16-ER12UN WMP32G indexable insert – coated carbide for stainless steels (Walter Tools) The TS16-ER12UN WMP32G is a coated indexable turning insert designed for machining stainless steel under medium to robust conditions, combining a wear‑resistant coating with a chipbreaker tuned for stable swarf control. Tiger·tec Gold coating for enhanced wear resistance WMP32G grade optimised for stainless steel machining ER12UN chipbreaker for stable chip formation Coated carbide for reliable edge life Consistent performance through advanced coating technology The insert’s Tiger·tec Gold coating delivers a measurable improvement in wear resistance and temperature tolerance compared with uncoated grades. As a coated carbide solution, the geometry and surface treatment reduce flank wear and adhesive built‑up when cutting tough, work‑hardening alloys. The result is a predictable tool life that supports stable cycle times and fewer tool changes, which in turn lowers process interruptions and contributes to a more efficient production flow. Technical buyers benefit from a product that balances durability with repeatable performance in series machining. Stable chip control and improved surface quality Equipped with the ER12UN chipbreaker, the insert promotes controlled swarf formation when machining stainless steels (ISO group M). The chip geometry reduces the tendency to form long, tangled chips and helps to evacuate heat from the cutting zone, improving surface finish and reducing rework. For operations where component quality and machine uptime matter, the combination of chip control and a wear‑resistant grade means fewer stalls and less operator intervention. This leads to a direct impact on throughput and contributes to cost efficiency over the tool life. Ready integration for mixed shop environments Designed for indexable turning applications, this insert fits common toolholder systems and can be specified where stainless steel is the primary material. The WMP32G grade targets the particular challenges of stainless steel—tendency to strain‑hardening, high thermal loads and adhesive wear—making it suitable for medium to robust cutting conditions. Process engineers will value the clarity of material compatibility and the simplified grade selection; the insert reduces the need for excessive trial cuts and supports consistent quality across batches. For application advice or detailed cutting data, Metav Werkzeuge’s technical advisers can provide tailored process parameters. For machining stainless steel with the proven Tiger·tec Gold technology, contact Metav Werkzeuge for ordering and process support: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS16-ER12UN-WMP32G-WALTER Product name: Drehwendeschneidplatte TS16-ER12UN WMP32G Walter Tools Manufacturer: Walter Tools Facts ISO designation: TS16-ER12UN WMP32G Grade: M (stainless steels) Special features Tiger·tec Gold coating WMP32G coated carbide grade ER12UN chipbreaker Suitable for stainless steel (ISO group M) Indexable turning insert type FAQ What materials is this insert intended for? The TS16-ER12UN WMP32G insert is formulated for stainless steel (ISO group M) applications and performs well under medium to robust cutting conditions. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on this grade increases wear resistance and thermal stability, which helps to extend edge life and maintain consistent cutting performance in serial machining. What advantage does the ER12UN chipbreaker provide? The ER12UN chipbreaker promotes controlled chip formation, reduces long or stringy swarf and aids heat evacuation, which improves surface finish and reduces interruptions. Is this insert compatible with standard turning toolholders? Yes, the TS16-ER12UN WMP32G is an indexable turning insert designed for common toolholder systems; check the toolholder clamping and seat geometry for full compatibility. Can the grade be used for mixed batches or variable cutting conditions? The WMP32G grade is optimised for stainless steels and tolerates medium to robust conditions, making it suitable where batch variability occurs; for optimised cutting data, consult Metav Werkzeuge’s technical advisers. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, factory‑new goods of the manufacturer.
TS16-ER12UN-F5 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP32G grade and the ER12UN-F5 chipbreaker for reliable machining of stainless steel; this results in stable chip formation and consistent cutting-edge performance. Order the insert directly via Metav Werkzeuge or consult the Metav team for application advice. TS16-ER12UN-F5 WMP32G Walter Tools — Indexable turning insert with Tiger·tec Gold coating for stainless steel A high-performance indexable turning insert designed for machining stainless steel, combining a Tiger·tec Gold coated grade with an ER12UN-F5 chipbreaker for predictable chip control and edge stability. Tiger·tec Gold coated grade WMP32G Optimised for machining stainless steel ER12UN-F5 chipbreaker for stable chips Consistent cutting-edge reliability Improve process reliability with a coated grade built for stainless steel The WMP32G grade, based on Walter Tools’ Tiger·tec Gold technology, is a coated carbide that supports machining of stainless steel under medium to robust conditions. The coating system improves wear resistance and thermal stability, so tool life is extended and recessing or edge build-up is reduced. For production environments where consistent component quality is essential, the coated grade contributes to fewer reworks and steadier cycle times. Predictable chip control and safer turning operations The ER12UN-F5 chipbreaker geometry is engineered to promote stable chip formation when turning ductile and work-hardening stainless steels. Stable chips reduce the risk of entanglement and tool damage; consequently, machine uptime is supported and handling time at the machine is lowered. In practice, the specified chipbreaker leads to more uniform chip segmentation, which is particularly beneficial when facing interrupted cuts or variable feed conditions. Clear specification for integration into tooling systems The ISO-style designation TS16-ER12UN-F5 indicates the insert geometry and the applied chipbreaker; this format ensures straightforward compatibility checks with tool holders and clamping systems. The insert is an indexable turning insert, supplied in the WMP32G grade and intended for use where a balance of edge stability and wear resistance is required. Using standardised designations simplifies tool inventory management and replacement procedures on the shop floor. Productivity gains through material-specific design Because the grade is optimised for the M workpiece group (stainless steel), the cutting performance is tailored to address common issues such as material toughness and heat generation. The result is a reduction in edge degradation and a more reliable surface finish over extended tool life. For manufacturers producing stainless components, this targeted performance can translate into measurable productivity improvements across batch production and single-piece flow alike. Contact Metav Werkzeuge for procurement details and application guidance on Walter Tools Tiger·tec Gold inserts; Metav’s specialists can advise on grade selection, holder compatibility and process parameters. Technical data SKU: TS16-ER12UN-F5-WMP32G-WALTER Designation: TS16-ER12UN-F5 WMP32G Product type: Drehwendeschneidplatte (indexable turning insert) Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER12UN-F5 Manufacturer: Walter Tools UID: TS16-ER12UN-F5-WMP32G-WALTER Core data Material group: M (stainless steel) Intended application: Turning / indexable insert operations Geometry code: TS16-ER12UN-F5 Chip control: ER12UN-F5 Special features Coating technology: Tiger·tec Gold Substrate: Coated carbide Performance focus: Stable cutting edge and wear resistance Recommended for: Medium to robust stainless steel machining FAQ What materials is this insert suitable for? The TS16-ER12UN-F5 WMP32G insert is formulated for stainless steel (ISO group M) and is optimised to manage the toughness and thermal characteristics of these alloys. How does the Tiger·tec Gold coating help in production? The Tiger·tec Gold coating on the WMP32G grade increases thermal stability and wear resistance, which enhances tool life and maintains cutting-edge integrity during prolonged turning operations. What benefit does the ER12UN-F5 chipbreaker provide? The ER12UN-F5 chipbreaker promotes consistent chip segmentation and safer chip evacuation, reducing the likelihood of entanglement and improving overall machine uptime when machining stainless steels. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand presentation: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands beyond the sale of original, factory-new products of the manufacturer.
TS16-ER12UNJ WMP22G WMP22G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the WMP22G grade for secure, repeatable machining of rostfreier Stahl; order directly via Metav Werkzeuge or consult our specialists for application advice. TS16-ER12UNJ WMP22G indexable turning insert – Walter Tools, Tiger·tec Gold, ER12UNJ chipbreaker TS16-ER12UNJ WMP22G is an indexable turning insert designed for reliable metalcutting in demanding rostfreier Stahl applications Tiger·tec Gold coating for high durability Optimised ER12UNJ chipbreaker geometry Designed for rostfreier Stahl machining Walter Tools quality and stable cutting edge Consistent productivity through proven cutting-grade technology The combination of the WMP22G grade and Tiger·tec Gold technology delivers a coated carbide solution that prioritises consistent cutting performance and predictable tool life. In practice, this means fewer interruptions for tool change and a more stable process window when machining rostfreier Stahl, a material class that tends to work-harden and produce built-up edge. The engineered coating and substrate pair support controlled wear behaviour and maintain cutting-edge integrity under medium to robust cutting conditions. Controlled chip formation and surface integrity for stainless applications The ER12UNJ chipbreaker geometry is optimised for interrupted and continuous turning of tough alloys, promoting stable chip formation and reducing the risk of tangled chips or workpiece damage. For shops seeking repeatable surface quality, this insert helps to manage heat and material flow at the cutting zone, which in turn reduces the tendency for smearing or edge build-up common with austenitic rostfreier Stahl. The result is improved component finish and fewer rework cycles. Durable coating and edge security for extended tool life The coating system in this range combines adhesion and thermal protection to resist the high temperatures encountered when turning rostfreier Stahl. The Tiger·tec Gold platform enhances edge robustness and reduces flank wear, supporting longer intervals between indexings. This benefit directly contributes to higher uptime and lower unit costs in batch production, while preserving dimensional consistency across serial parts. Simple integration into existing turning systems and toolholders Compatibility with standard clamping systems and common insert seats makes the part straightforward to adopt. The geometry and grade are selected to match conventional turning strategies for medium to heavy-duty rostfreier Stahl tasks, allowing process engineers to focus on optimising speeds, feeds and coolant strategies rather than altering toolset basics. The design supports predictable behaviour across varied part geometries and contributes to process security in daily operations. Contact Metav Werkzeuge for tailored application advice on Walter Tools indexable turning inserts — quote requests and technical enquiries handled at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: TS16-ER12UNJ-WMP22G-WALTER Designation: TS16-ER12UNJ WMP22G Product type: Indexable turning insert Brand: Walter Tools Core data Material group: M (rostfreie Stähle) Chipbreaker: ER12UNJ Coating series: Tiger·tec Gold Special features Grade: WMP22G (coated carbide) Suitable for rostfreier Stahl Stable chip formation and edge security FAQ What materials is this insert intended for? The TS16-ER12UNJ WMP22G insert from Walter Tools is intended primarily for rostfreier Stahl machining and performs best under medium to robust cutting conditions. What does the WMP22G grade offer? WMP22G is a coated carbide grade within the Tiger·tec Gold family that provides enhanced edge robustness and wear resistance for demanding rostfreier Stahl applications. How does the ER12UNJ chipbreaker affect performance? The ER12UNJ chipbreaker on this insert promotes controlled chip formation, reducing the likelihood of chip entanglement and supporting consistent surface finishes when turning tougher alloys. Can the insert be used with standard turning toolholders? Yes, the TS16-ER12UNJ WMP22G is designed for straightforward integration with conventional turning toolholders and clamping systems used in industrial turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, brand-new goods from the manufacturer.
TS16-ER12UNJ WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, Tiger·tec Gold wear resistance and optimised chip control for consistent production results; order the TS16-ER12UNJ WMP32G directly via Metav Werkzeuge or consult our specialists for application advice. TS16-ER12UNJ WMP32G – indexable turning insert, Tiger·tec Gold (rostfreier Stahl) by Walter Tools The TS16-ER12UNJ WMP32G is an indexable turning insert engineered for dependable machining of rostfreier Stahl where medium to robust cutting conditions occur. *Tiger·tec Gold coating for extended durability *Optimised chip control for rostfreier Stahl *Coated carbide grade WMP32G for stable edges *Suitable for medium to robust machining conditions Reliable cutting in rostfreier Stahl for fewer interruptions The insert is designed to address the specific challenges of machining rostfreier Stahl: material toughness, tendency to form built-up edge and high heat generation. The WMP32G grade combines a coated carbide substrate with the Tiger·tec Gold technology to support consistent chip control and reduced edge wear. For production environments this means fewer unplanned tool changes and a more predictable machining cycle — a clear advantage for batch-oriented and continuous turning operations. Consistent surface finish with controlled chip formation The integrated ER12UNJ chipbreaker promotes controlled chip breakage and evacuation when working in stainless grades, which helps avoid long stringy chips and the associated surface defects. Controlled chip flow contributes to a steady contact zone between tool and workpiece, improving surface quality while maintaining a stable cutting edge. For operators with limited specialist knowledge, the chipbreaker concept can be understood as a geometric aid that breaks and channels chips away from the cut, preventing nests and tool damage. Longer tool life and improved process efficiency The combination of a robust carbide substrate and advanced coating technology delivers higher wear resistance and thermal stability compared with conventional grades. This results in extended tool life and lower consumption of inserts per production run, supporting an improved cost-per-part ratio and higher uptime. In production terms, a more durable cutting edge promotes repeatable results and contributes directly to downstream productivity gains through fewer machine stoppages and more consistent part tolerances. Practical integration and machining advice for easy adoption The insert fits established tooling systems for indexable turning and integrates without the need for special fixtures. Its application range is defined for rostfreier Stahl under medium to robust conditions, making it a pragmatic choice for workshops that machine a variety of stainless alloys. When specifying cutting data, standard practice is to select parameters conservatively at first and adapt feed and speed according to observed chip form and surface finish. For tailored recommendations on holder geometry and cutting strategy, experts at Metav Werkzeuge can provide application-specific guidance. For high process reliability with Walter Tools’ Tiger·tec Gold grade, contact Metav Werkzeuge for detailed recommendations or to request a quotation by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: TS16-ER12UNJ-WMP32G-WALTER Name: Drehwendeschneidplatte TS16-ER12UNJ WMP32G Walter Tools Manufacturer: Walter Tools Product type: indexable turning insert Facts Grade designation: WMP32G Series: Tiger·tec Gold Material group: M (rostfreie Stähle) Chipbreaker: ER12UNJ ISO designation: TS16-ER12UNJ WMP32G Special features Coating/grade: Tiger·tec Gold (coated carbide) Application: machining of rostfreier Stahl Tool function: turning indexable insert Cut conditions: medium to robust machining applications FAQ What materials is this insert suitable for? The TS16-ER12UNJ WMP32G is intended primarily for rostfreier Stahl and is optimised for the thermal and mechanical demands of stainless grades. What does the WMP32G grade offer compared with standard grades? WMP32G, part of the Tiger·tec Gold family, provides enhanced wear resistance and thermal stability compared with standard coated carbide grades, improving consistency and tool life. How does the ER12UNJ chipbreaker affect machining? The ER12UNJ chipbreaker is designed to produce short, controllable chips when machining rostfreier Stahl, aiding evacuation and helping to protect the cutting edge and finished surface. Is the insert suitable for continuous production runs? Yes, the combination of the WMP32G grade and Tiger·tec Gold coating supports extended tool life and stable cutting edges, making it suitable for continuous or batch production where rostfreier Stahl is machined. Which toolholders are compatible with the ISO designation? The ISO designation TS16-ER12UNJ WMP32G indicates a standard indexable insert form; compatible toolholders follow the same ISO geometry for turning inserts. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Protected trademarks and product names are mentioned for explanation only. There is no affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the stated manufacturer.
TS16-ER12W WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a robust WMP32G grade and an ER12W chipbreaker for reliable machining of stainless steels; these features deliver consistent chip control and improved tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TS16-ER12W WMP32G — Turning indexable insert, Tiger·tec Gold, ER12W chipbreaker for stainless steels (Walter Tools) The TS16-ER12W WMP32G is a turning indexable insert designed for machining stainless steels under medium to robust cutting conditions, combining a coated carbide grade with a dedicated chipbreaker for stable performance. Tiger·tec Gold coating for long tool life WMP32G grade optimised for stainless steel ER12W chipbreaker for stable chip control Precise insert for medium to heavy turning Increased process reliability through advanced coating The combination of the Tiger·tec Gold coating and the WMP32G grade creates a resilient cutting surface that resists adhesive wear and edge deformation when machining stainless steels. This coated carbide formulation supports a stable cutting edge under elevated temperatures and heavy loadings, which reduces the risk of built-up edge formation and unplanned rework. The result is a measurable improvement in process reliability and a reduction in scrap rates for repetitive turning operations. Better chip control and surface quality with ER12W The ER12W chipbreaker is engineered to break and evacuate chips consistently in the demanding material group ISO M. Through controlled chip formation, the insert minimises friction at the cutting zone and thereby contributes to an improved surface finish and extended tool life. For production environments where cycle time and part accuracy matter, this leads to fewer interruptions for manual chip clearing and more predictable machining results. Productivity gains for medium to robust turning tasks Selected for medium to robust cutting regimes, the insert supports stable machining strategies that favour longer tool life and fewer indexings. The grade’s balance between toughness and wear resistance helps maintain cutting performance over longer tool paths, enabling operators to plan economical tool-change intervals and maintain machine uptime. As a Walter Tools product, the design intent focuses on repeatable outcomes and consistent performance across serial production runs. Discuss machining requirements with Metav Werkzeuge — request application-specific recommendations for the TS16-ER12W WMP32G and receive tailored guidance from our specialists at Metav Werkzeuge (info@metav-werkzeuge.com / +49 2822 7131930) Technical data Article number: TS16-ER12W-WMP32G-WALTER Manufacturer: Walter Tools Product type: Turning indexable insert ISO designation: TS16-ER12W WMP32G Series: Tiger·tec Gold Facts Grade: WMP32G Material group: M (stainless steels) Chipbreaker: ER12W Special features Coating: Tiger·tec Gold (coated carbide) Suitable for: rostfreier Stahl Design intent: stable chip formation and wear resistance FAQ What materials is this insert intended for? The TS16-ER12W WMP32G is specified for ISO group M materials, which covers stainless steels and similar alloys suited to the WMP32G grade. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating on the WMP32G grade enhances resistance to adhesive wear and heat, which typically extends tool life and maintains a stable cutting edge during prolonged turning operations. What benefit does the ER12W chipbreaker provide? The ER12W chipbreaker produces consistent chip segmentation and evacuation, improving chip control and contributing to better surface finish and reduced machine downtime for chip clearing. Is this insert suitable for heavier cutting conditions? Yes. The combination of a tough coated carbide grade and the ER12W chipbreaker makes the insert suitable for medium to robust cutting conditions where process stability is required. Which brand manufactures this insert and what can be expected from it? The insert is from Walter Tools; the design focuses on consistent performance and process reliability for industrial turning applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original, factory-new merchandise of the manufacturer.
TS16-ER13UN WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WMP32G grade for reliable machining of stainless steels; the ER13UN chipbreaker ensures stable chip control and extended edge life. Order the TS16-ER13UN WMP32G directly via Metav Werkzeuge or consult our specialists for application support. TS16-ER13UN WMP32G indexable turning insert – Tiger‑tec Gold coating, for stainless steel (Walter Tools) The TS16-ER13UN WMP32G is a precision indexable turning insert designed for the safe and productive machining of stainless steels under medium to robust cutting conditions. Tiger‑tec Gold coated for improved wear resistance WMP32G grade optimised for stainless steel ER13UN chipbreaker for stable chip control Reliable edge life under medium to heavy conditions Consistent performance on stainless steels for predictable production The combination of the WMP32G carbide grade with the Tiger‑tec Gold coating provides a balanced package of toughness and wear resistance that is specifically matched to the challenges of machining stainless steels. The grade supports stable cutting edges under conditions that typically cause rapid tool wear, while the coating reduces flank and crater wear. For production environments where repeatability matters, this results in fewer tool changes and more consistent cycle times. The design of the insert — specified as TS16-ER13UN — includes the ER13UN chipbreaker form, which promotes secure chip formation and reduces the risk of built-up edge, improving surface quality and dimensional stability. Reduced downtime through enhanced edge life and chip control Equipped with technology tailored for tough alloys, the insert offers extended tool life and improved process stability. The chipbreaker geometry controls fragmenting and evacuation of chips, which lowers the likelihood of recutting and tool damage in interrupted or continuous cuts. As a consequence, machines run longer between tool interventions and tool life is extended without sacrificing component quality. The material designation M signals clear suitability for stainless steels, making selection straightforward for engineers and tool planners seeking robust, long-running solutions. Practical benefits for shop-floor use and easy integration The form factor TS16-ER13UN fits established clamping systems for indexable turning inserts and allows quick replacement during machining cycles. The insert’s coated carbide composition balances resistance to thermal and mechanical loads while keeping cutting forces predictable. For manufacturers aiming to improve throughput, the insert converts technical advantages into operational benefits: consistent surface finish, reduced rework, and predictable maintenance intervals. Select holders and cutting parameters that match the ER13UN chipbreaker to exploit the full advantages of the grade and coating. Application guidance and compatibility notes This insert is primarily intended for turning operations on stainless steels in medium to heavy duty contexts; selection of cutting data should reflect material condition and heat generation typical for those alloys. Where corrosion-resistant or austenitic grades are present, the Tiger‑tec Gold coating helps to mitigate adhesion tendencies. For integration into existing tool lists, the TS16-ER13UN format and ER13UN chipbreaker are widely compatible with common indexable turning systems, permitting seamless substitution and fast deployment in multi-shift production. For machining that demands the reliability of Walter Tools’ Tiger‑tec Gold technology, contact Metav Werkzeuge to procure the original TS16-ER13UN WMP32G insert and obtain application advice from our technical consultants at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TS16-ER13UN-WMP32G-WALTER Designation: TS16-ER13UN WMP32G Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Core data Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: ER13UN Material group: M (stainless steels) Special features Coating technology: Tiger‑tec Gold Suitable for: stainless steel machining Insert format: TS16-ER13UN Material composition: coated carbide FAQ What materials is this insert suitable for? The TS16-ER13UN WMP32G insert is optimised for stainless steels (material group M) and performs reliably under medium to robust cutting conditions. How does the Tiger‑tec Gold coating help in practice? The Tiger‑tec Gold coating on this Walter Tools insert enhances wear resistance and reduces adhesion, which helps to maintain a stable cutting edge and prolong tool life on demanding stainless steel applications. Which chipbreaker is integrated and what is its benefit? The insert features the ER13UN chipbreaker, designed for controlled chip formation and evacuation, reducing the risk of built‑up edge and improving surface finish. Can the TS16-ER13UN WMP32G replace other M‑grade inserts in existing toolholders? In most cases the TS16-ER13UN form is compatible with standard indexable turning holders; toolholders must be checked against the TS16 insert geometry before substitution. Is this insert suitable for high‑temperature or interrupted cuts? The combination of the WMP32G grade and Tiger‑tec Gold coating gives the insert good resistance to thermal loads and mechanical shock, making it a suitable choice for many interrupted and elevated‑temperature stainless steel operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and imply no affiliation between our company and the named manufacturers. The offered item is an original, factory‑new product from the manufacturer.
TS16-ER14ACME WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the WMP32G grade and Tiger·tec Gold technology to maintain a stable cutting edge and reliable chip formation when machining stainless steel; order directly via Metav Werkzeuge or consult our technical team for tailored cutting data. TS16-ER14ACME WMP32G indexable turning insert — Tiger·tec Gold, for stainless steel (Walter Tools) The TS16-ER14ACME WMP32G is an indexable turning insert optimised for machining stainless steel under medium to robust conditions, combining a Tiger·tec Gold coated carbide grade with an ER14ACME chipbreaker for improved process stability. Tiger·tec Gold coated carbide grade WMP32G Optimised chip control ER14ACME geometry Designed for stainless steel (ISO M) Stable cutting edge for robust conditions Maximise productivity when machining stainless steel with a coated WMP32G grade The combination of Tiger·tec Gold technology and the WMP32G grade provides a balance between wear resistance and fracture toughness that yields consistent performance in demanding stainless steel operations. Coated carbide reduces adhesive built-up and heat-related edge degradation, so the indexable plate delivers longer periods between tool changes and more predictable component quality. This translates directly into improved throughput and fewer interruptions on the shop floor. The result is a pragmatic increase in machining efficiency while maintaining surface integrity on parts made from ISO M materials. Predictable chip control through the ER14ACME geometry The ER14ACME chipbreaker is designed to form short, controllable chips when cutting tough, ductile stainless steels, minimising the risk of entanglement and tool nose damage. Reliable chip control reduces secondary operations and machine downtime, supporting a smoother production flow. Where machinability is limited by work hardening or high heat generation, the geometry helps to evacuate chips consistently and protect the cutting edge, lowering the incidence of built-up edge and extending effective tool life. This predictability supports tighter process windows and repeatable results in batch production. Practical integration and application guidance for production environments The insert is suitable for a range of turning tasks from medium roughing to semi-finish passes on stainless steel, offering process security and consistent surface finishes when used with appropriate feeds and speeds. As an indexable insert from Walter Tools, it is compatible with standard tooling systems that accept TS16-type inserts and benefits from the manufacturer’s focus on stable cutting edges. For marking up feeds and speeds, consult Metav Werkzeuge for application-specific recommendations; tailored cutting data will help to exploit the Tiger·tec Gold coating and ER14ACME chipbreaker fully while protecting component tolerances and minimising rework. Contact Metav Werkzeuge for application-specific data and to secure TS16-ER14ACME WMP32G inserts from stock; technical consultation and fast supply are available Technical Data SKU: TS16-ER14ACME-WMP32G-WALTER Name: TS16-ER14ACME WMP32G indexable turning insert Brand: Walter Tools Grade: WMP32G Facts Material group: M (stainless steel) Chipbreaker: ER14ACME Series: Tiger-tec Gold Special features Coating technology: Tiger·tec Gold Coated carbide grade optimised for ductile stainless steels Stable cutting edge for medium to robust conditions Designed for predictable chip formation and reduced built-up edge FAQ Which materials is this insert intended to machine? The TS16-ER14ACME WMP32G insert is designed primarily for stainless steel (ISO M) applications where ductility and heat generation require reliable chip control and edge stability. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WMP32G grade improves wear resistance and reduces adhesion, helping the insert maintain a sharp and stable cutting edge during extended runs in stainless steel. How does the ER14ACME chipbreaker affect machining? The ER14ACME geometry promotes short, consistent chips and lowers the likelihood of entanglement, supporting uninterrupted machining and reduced secondary cleaning or rework. Is the insert suitable for finishing passes? Yes, when paired with appropriate feeds and cutting conditions, the TS16-ER14ACME WMP32G can be used for semi-finish and finishing operations, delivering consistent surface quality on stainless components. How does Walter Tools’ WMP32G grade support process reliability? Walter Tools’ WMP32G grade combines coated carbide and design optimisation to offer process security, extended tool life, and stable performance across batch and continuous production. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not indicate any affiliation between our company and the named brands. The offered item is original, factory-new merchandise of the manufacturer.
TS16-ER14BSPT WMP32G WMP32G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the WMP32G carbide grade ensures reliable chip control and extended edge life in demanding stainless steel applications; benefit from consistent productivity and low tooling costs. Order the TS16-ER14BSPT WMP32G directly via Metav Werkzeuge or consult the technical advisors for specific machining data. TS16-ER14BSPT WMP32G indexable turning insert by Walter Tools — Tiger·tec Gold, ER14BSPT chipbreaker The TS16-ER14BSPT WMP32G is an indexable turning insert engineered for secure chip formation and robust performance when machining stainless steels under medium to heavy cutting conditions. Tiger·tec Gold coating for wear resistance Optimised for stainless steel machining Stable chip control with ER14BSPT breaker Improved machining performance for stainless steels The coated carbide composition and the Tiger·tec Gold technology deliver higher wear resistance and a more consistent cutting edge compared with conventional grades. The WMP32G grade is developed specifically for stainless steels (M), materials that are prone to work hardening and built-up edge formation; the coating and substrate combination reduces friction and thermal load at the cutting zone, which supports stable machining and helps to maintain dimensional accuracy over longer tool life. This results in fewer tool changes and improved process reliability on batch and continuous production runs. Geometry and chip control explained for reliable results The plate geometry identified by the designation TS16 and the ER14BSPT chipbreaker are matched to provide predictable chip flow and to avoid entangling swarf in turning operations. An indexable insert such as this allows quick rotation to a fresh cutting edge, reducing machine downtime. The ER14BSPT breaker fosters short, controllable chips in many stainless-steel turning situations, lowering the risk of surface damage and facilitating safe evacuation. In production terms, this means smoother cycle times and less manual intervention at the machine. Process integration and practical benefits on the shop floor Integration of this insert into existing toolholders is straightforward where the TS16 form is supported; the result is a reliable cutting edge that contributes to consistent surface finish and repeatable component quality. The coated grade supports longer intervals between regrinds or indexings, which lowers tooling consumption and overall operating costs. For workshops aiming to improve throughput and reduce variability when machining rostfreiem Stahl, the combination of geometry, chipbreaker and Tiger·tec Gold coating provides a pragmatic route to enhanced productivity and lowered scrap rates. Contact Metav Werkzeuge for tailored application advice on the Walter Tools TS16-ER14BSPT WMP32G indexable insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS16-ER14BSPT-WMP32G-WALTER Item designation: TS16-ER14BSPT WMP32G Type: indexable turning insert Grade: WMP32G Series/coating: Tiger·tec Gold Chipbreaker: ER14BSPT Material group: M (stainless steels) Core Data SKU: TS16-ER14BSPT-WMP32G-WALTER UID: TS16-ER14BSPT-WMP32G-WALTER Special features Suitable for stainless steels Coated carbide grade Optimised for medium to heavy cutting conditions Stable chip formation Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The TS16-ER14BSPT WMP32G is designed for stainless steels (M group), offering secure chip formation and reduced tendency to build up on the cutting edge. How does the Tiger·tec Gold coating help in turning operations? The Tiger·tec Gold coating enhances surface hardness and wear resistance, lowering friction and heat at the cutting zone for longer insert life and consistent results. What is the role of the ER14BSPT chipbreaker? The ER14BSPT chipbreaker shapes and breaks chips into short, controllable segments suitable for typical turning applications in rostfreiem Stahl, improving evacuation and surface protection. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered marks are used solely for identification and explanation. There is no affiliation between Metav Werkzeuge and the mentioned manufacturers; the offered article is an original, factory-new product of the stated brand. The Walter brand is mentioned in this context where relevant.
TS16-ER14NPT WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of a specialised grade for stainless steel, the protective Tiger‑tec Gold coating and a dedicated ER14NPT chipbreaker for controlled chip formation; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. TS16-ER14NPT WMP32G indexable turning insert for stainless steel machining by Walter Tools The TS16-ER14NPT WMP32G is an indexable turning insert engineered for reliable cutting in stainless steel applications, offering stable chip control and long tool life under medium to robust conditions Tiger‑tec Gold coating for longer tool life WMP32G grade for stainless steel machining Stable chip control under heavy cuts Coated cemented carbide, robust cutting edge Consistent performance when machining stainless steel The insert is optimised for machining stainless steel, a material group that typically produces high heat and tends towards built-up edge formation. Thanks to the WMP32G cemented carbide grade, the insert promotes stable chip formation and a predictable cutting process. This results in fewer interruptions, reduced rework and a more consistent cycle time. The chipbreaker geometry labelled ER14NPT is designed to control chip flow even under heavier cuts, helping to avoid entanglement and improving operator safety. Coating and grade that reduce wear and extend service intervals The Tiger‑tec Gold coating combines wear resistance with thermal protection so the cutting edge maintains its geometry longer in demanding stainless steel work. The coated cemented carbide substrate offers a balance between toughness and hardness, reducing the risk of chipping while preserving wear resistance. For production environments this means longer tool life, fewer insert changes and a lower cost per part over time, boosting overall equipment effectiveness without sacrificing surface integrity. Predictable surface quality and improved process reliability A stable cutting edge and consistent chip control translate directly into improved surface finishes and repeatability. The insert’s design supports secure cutting under medium to robust conditions, which benefits shops seeking reliable results across batch runs. By choosing an insert with a proven grade like WMP32G and coated with Tiger‑tec Gold, the machining process becomes more tolerant to variable feed and speed settings, reducing scrap rates and increasing throughput for stainless steel components. For tailored grade selection and toolholder compatibility for your stainless steel applications, contact Metav Werkzeuge for specific recommendations and immediate availability. Technical Data SKU: TS16-ER14NPT-WMP32G-WALTER Product type: Indexable turning insert Designation: TS16-ER14NPT WMP32G Series: Tiger‑tec Gold Grade: WMP32G Chipbreaker: ER14NPT Material group: M Facts ISO material group: M Suitable for: stainless steel Application range: medium to robust machining conditions Special features Coated cemented carbide Tiger‑tec Gold coating ER14NPT chipbreaker for chip control Robust cutting edge for repeatable performance Manufacturer: Walter Tools FAQ Which materials is this insert suitable for? The TS16-ER14NPT WMP32G indexable turning insert by Walter Tools is specified for stainless steel (ISO group M) and performs well under medium to robust cutting conditions. What benefit does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WMP32G grade increases wear resistance and thermal protection, extending insert life and improving stability during stainless steel machining. What does ER14NPT mean for chip control? ER14NPT denotes the chipbreaker geometry; the ER14NPT design on this insert promotes stable chip formation and safer chip evacuation during heavier cuts. Is the grade suitable for finishing operations? The WMP32G grade is optimised for reliable cutting and good surface quality in stainless steel; it is particularly effective for medium to robust operations, while finish requirements should be validated against specific cutting parameters. Which toolholders are compatible with this insert? This indexable turning insert fits holders designed for the TS16 family; verify clamping and seat geometry to ensure correct fit and secure positive seating. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners. Mention of brand names such as Walter Tools is for clarification and comparison only and does not indicate any connection between our company and the trademark owners. The offered product is an original, factory‑new article of the manufacturer.
TS16-ER14UN WMP22G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the WMP22G grade for secure chip control and extended edge stability in demanding stainless steel turning. For a reliable upgrade to production processes, order through Metav Werkzeuge or consult their specialists for cutting-data recommendations. TS16-ER14UN WMP22G – Indexable turning insert for stainless steel, Tiger·tec Gold (Walter Tools) The TS16-ER14UN WMP22G is an indexable turning insert engineered for machining stainless steel under medium to robust cutting conditions, offering controlled chip formation and consistent edge performance. Tiger·tec Gold coating Optimised for stainless steel Stable chip formation Consistent edge stability Reliable machining of stainless steels with higher cutting rates The coated carbide grade provides a balance between hardness and toughness that favours processing of stainless steel (ISO group M). The Tiger·tec Gold technology enhances thermal resistance and wear behaviour, which reduces the risk of built-up edge and supports stable cutting over longer tool life. For production environments, this means fewer interruptions for tool changes and a more predictable machining cycle, so cycle times can be optimised while maintaining component quality. Better productivity through chip control and repeatable results The integrated chip control geometry ER14UN is designed to break and evacuate chips reliably when turning ductile, work-hardening materials. Improved chip handling reduces rework and machine downtime and contributes to a superior surface finish with fewer secondary operations. The combination of grade and chipbreaker delivers consistent tool life, allowing process planners to specify cutting data with confidence and to improve overall throughput in series and batch production. Practical guidance for selection and application As an indexable turning insert in the TS16 format, the item is intended for secure clamping in standard toolholders that accept TS16 inserts; the geometry supports moderate to robust cut parameters typical for demanding stainless steel tasks. Cutting data should be chosen to balance heat generation and feed per revolution; lean coolant strategies or appropriate cutting fluids are recommended where thermal control is critical. For tailored recommendations on feeds, speeds and holder compatibility for the TS16-ER14UN WMP22G, Metav Werkzeuge can provide application-specific advice and documented cutting examples. Contact Metav Werkzeuge for tailored cutting-data support on Walter Tools Tiger·tec Gold inserts and secure the optimal insert for stainless steel production needs — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TS16-ER14UN-WMP22G-WALTER Description: Drehwendeschneidplatte TS16-ER14UN WMP22G Walter Tools Product type: Indexable turning insert Grade: WMP22G Series: Tiger·tec Gold Core data ISO designation: TS16-ER14UN WMP22G Material group: M (stainless steels) Chipbreaker: ER14UN Material code: M Special features Coating/technology: Tiger·tec Gold (coated carbide) Application: medium to robust conditions on stainless steels Benefits: stable chip formation, edge stability, predictable tool life Manufacturer: Walter Tools FAQ What materials is this insert designed for? The TS16-ER14UN WMP22G is specified for ISO material group M, meaning it is optimised for machining stainless steels under medium to robust conditions. How does the Tiger·tec Gold technology help in turning stainless steel? Tiger·tec Gold provides improved thermal resistance and wear behaviour, which supports stable cutting, reduces built-up edge and contributes to longer, more predictable tool life with the WMP22G grade. Which chipbreaker is fitted and what is its benefit? The insert features the ER14UN chipbreaker, engineered to produce short, controllable chips in ductile materials, improving evacuation and surface finish during turning. Is the TS16-ER14UN format compatible with standard holders? The TS16 format is a common indexable insert form; compatibility depends on the holder design, but the insert is intended for holders accepting TS16-type inserts and offers secure clamping and repeatable positioning. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for identification and explanation only; there is no affiliation between our company and the named brands. The offered item is an original, brand-new product from the manufacturer Walter Tools.
TS16-ER14UN WMP32G Wendeplatten - Walter Tools
Die Kombination aus der beschichteten Hartmetallsorte WMP32G und der Tiger·tec Gold-Technologie sorgt für sichere Spanbildung und eine stabile Schneidkante bei rostfreien Stählen; dies führt zu längerer Standzeit und konstanteren Ergebnissen. Order the TS16-ER14UN WMP32G indexable turning insert directly via Metav Werkzeuge or ask our consultants if needed. TS16-ER14UN WMP32G indexable turning insert — Tiger‑tec Gold, for stainless steels | Walter Tools TS16-ER14UN WMP32G is an indexable turning insert engineered for machining stainless steels under medium to robust cutting conditions, offering enhanced chip control and predictable wear behaviour. Tiger·tec Gold coated carbide grade Optimised for stainless steels (ISO group M) ER14UN chipbreaker for secure chip control Consistent cutting-edge wear resistance High-performance grade tailored to stainless steels The combination of the WMP32G grade with Tiger·tec Gold coating provides a wear-resistant surface and thermal stability specifically for stainless steels, materials that typically cause built-up edge and heat concentration. The coated carbide substrate reduces adhesive wear and supports secure chip formation, which helps maintain cutting geometry over longer cycles. For production environments this means fewer insert changes and more consistent part quality, translating into measurable throughput gains. Greater process reliability and extended tool life A predictable cutting behaviour is a rational advantage on the shop floor: the insert's design promotes a stable cutting edge and controlled flank wear, improving process reliability. Under medium to robust conditions the insert sustains performance without aggressive edge degradation, reducing downtime for tool changes and rework. The technical benefit is clear — a longer effective tool life and more predictable maintenance intervals, which supports planning and reduces unplanned stoppages. Tangible shop-floor benefits: chip control and surface finish The ER14UN chipbreaker is optimised to break and direct chips reliably when cutting tough, ductile stainless steels, reducing entanglement and stabilising machining forces. Improved chip control lowers the risk of workpiece damage and enhances operator safety, while the controlled cutting action contributes to a finer surface finish with fewer secondary operations. These practical benefits reduce handling and inspection time, improving overall operational efficiency. Compatibility, typical uses and handling advice This indexable insert is identified as TS16-ER14UN WMP32G and is intended for holders and tool systems that accept the TS16 form factor and ER14UN chipbreaker geometry. Suitable applications include general turning and semi-finishing of ISO group M materials, where medium to robust parameters are required. When programming feeds and speeds, favour stable cutting parameters and adequate coolant or flow to mitigate heat at the cutting zone and to exploit the coated carbide's strengths. Contact Metav Werkzeuge for tailored machining parameters or to reserve TS16-ER14UN WMP32G from Walter Tools — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: TS16-ER14UN-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-ER14UN WMP32G Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Facts Grade: WMP32G Series: Tiger-tec Gold Insert designation: TS16-ER14UN WMP32G Material group: M (stainless steels) Special features Coating technology: Tiger·tec Gold Substrate: Coated carbide Chipbreaker: ER14UN Suitable for: stainless steels, medium to robust conditions FAQ What materials is this insert intended for? The TS16-ER14UN WMP32G insert from Walter Tools is formulated for ISO group M — stainless steels — and performs well under medium to robust cutting conditions. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WMP32G grade offers improved thermal stability and wear resistance, helping to reduce built-up edge and maintain cutting geometry during stainless-steel machining. Which chipbreaker does the insert use and what is its benefit? The ER14UN chipbreaker promotes reliable chip control when cutting ductile stainless steels, improving chip evacuation and reducing the risk of material adhesion on the cutting edge. Is the TS16-ER14UN WMP32G compatible with standard toolholders? The insert is compatible with toolholders and clamping systems designed for the TS16 form and ER14UN geometry; selection should match the insert seat and clamping specification. Is this insert suitable for finishing or roughing operations? The insert is suitable for both general turning and semi-finishing of stainless steels; parameter adjustment allows a balance between productivity and surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com