TS16-ER14UN-F5 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G carbide grade for reliable machining of stainless steels; the ER14UN‑F5 chip former ensures stable chips and consistent edge life in medium to robust turning operations. Order the insert directly via Metav Werkzeuge or request application advice from their consultants. TS16-ER14UN-F5 WMP32G indexable turning insert – Tiger·tec Gold for stainless steel (Walter Tools) TS16-ER14UN-F5 WMP32G is an indexable turning insert engineered for medium to robust machining of stainless steels, combining a coated carbide grade with a chip former tailored for secure chip control. Tiger·tec Gold coated carbide grade WMP32G ER14UN‑F5 chip former for stable chips Optimised for stainless steel (ISO M) Consistent edge life and process security Reliable performance for stainless-steel turning The insert is based on a coated carbide substrate and the WMP32G grade, developed to address the typical challenges of machining stainless steel: toughness, built‑up edge and high heat generation. The Tiger·tec Gold coating provides thermal and wear resistance, which translates into consistent edge life and reduced flank wear under medium to heavy cutting conditions. For production environments that prioritise predictability, this geometry and grade combination supports repeatable results and stable cycle times. Coating and grade explained for production benefits A coated carbide like WMP32G pairs a hard substrate with a multi‑layer coating that protects the cutting edge at elevated temperatures. In practice, this means improved process security during longer cuts and intermittent work. The Tiger·tec Gold technology improves adhesion and thermal stability compared with standard PVD coatings, allowing higher feed rates or extended tool life where thermal load is a limiting factor. For shops seeking a balance of productivity and robustness, the coating‑substrate system reduces unplanned tool changes. How the ER14UN‑F5 chip former improves shopfloor results The ER14UN‑F5 chip former is shaped to produce manageable chip segments when turning stainless steel, preventing long, entangling chips and easing automated part handling. Controlled chip breaking reduces the risk of workpiece damage and tool interference, which in turn lowers scrap rates and secondary handling. The insert’s geometry also supports stable cutting forces, contributing to improved surface finish and less vibration during threading and turning operations. Practical integration and recommended applications This indexable insert is suited for conventional and CNC lathes in batch and single‑piece production where stainless steel is a primary workpiece material. Its design favours medium to robust conditions rather than fine finishing passes; however, the combination of grade and chip former can extend capable cutting windows for mixed operations. If uncertainty remains about matching toolbody, clamping system or cutting parameters, Metav Werkzeuge provides technical advice and can supply application data to support setup decisions. For direct inquiries: info@metav-werkzeuge.com or +49 2822 7131930. Contact Metav Werkzeuge for tailored recommendations on Tiger·tec Gold inserts and assistance procuring the TS16-ER14UN-F5 WMP32G indexable turning insert from Walter Tools Technical data Article number: TS16-ER14UN-F5-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-ER14UN-F5 WMP32G Walter Tools Manufacturer: Walter Tools Product type: indexable turning insert Series: Tiger·tec Gold Facts Grade: WMP32G Chip former: ER14UN‑F5 Material group: M (stainless steel) Designation: TS16‑ER14UN‑F5 WMP32G SKU / UID: TS16-ER14UN-F5-WMP32G-WALTER Special features Coated carbide (multi‑layer coating technology) Optimised for rostfreie Stahl / stainless steel applications Stable chip formation and controlled chip breaking Suitable for medium to robust cutting conditions FAQ What materials is this insert suitable for? The TS16‑ER14UN‑F5 WMP32G indexable turning insert is specified for stainless steel (ISO group M) and designed to handle the toughness and thermal demands typical of these alloys. What does the WMP32G grade offer compared with standard grades? WMP32G is a coated carbide grade within the Tiger·tec Gold family; it provides enhanced thermal resistance and wear protection, giving more consistent edge life under higher thermal loads than many uncoated or standard PVD grades. How does the ER14UN‑F5 chip former affect machining? The ER14UN‑F5 geometry promotes segmental chip formation when turning stainless steel, reducing long chip formation, improving process reliability and simplifying chip evacuation in automated environments. Can the insert be used for finishing passes? While optimised for medium to robust cutting conditions, the insert can be used for finishing with adjusted parameters; surface finish improvements are typically achieved by lowering feed rates and cutting depths while leveraging the Tiger·tec Gold coating for thermal stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanation only and do not imply any affiliation between our company and the named brands. The offered item is an original, brand‑new product from Walter Tools. The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group.
TS16-ER14UNJ WMP22G WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WMP22G grade for dependable machining of stainless steel, securing stable chip formation and extended cutting-edge life; order the insert directly via Metav Werkzeuge or consult the sales engineers for application-specific data. TS16-ER14UNJ WMP22G indexable turning insert, Tiger‑tec Gold – for stainless steel (Walter Tools) A TS16-ER14UNJ WMP22G indexable turning insert engineered to deliver stable chip control and consistent edge life during medium to robust machining of stainless steel. Tiger‑tec Gold coating for extended tool life WMP22G grade designed for rostfreie Stähle ER14UNJ chipbreaker for controlled chips Proven edge stability under higher loads Precision and productivity when machining stainless steel The insert is optimised for processing stainless steel (ISO group M) where high toughness and heat generation demand a reliable cutting geometry. The combination of the WMP22G carbide grade and the Tiger‑tec Gold coating supports stable chip formation and reduces the risk of built-up edge, which in turn maintains surface finish and dimensional consistency. For workshop planners and production engineers, this means fewer tool changes, reduced rework and a more predictable machining cycle time. Coating and grade that extend tool life A coated hardmetal grade with a modern PVD/CVD-style surface treatment delivers a practical balance between wear resistance and edge toughness. The Tiger‑tec Gold technology provides thermal protection and improved flank wear resistance while the WMP22G formulation is tuned for the particular demands of rostfreie Stähle. As a result, the indexable insert offers extended interval lengths between regrinds or replacements and supports higher overall process efficiency on turned components. Chip control and machining stability for robust operations The ER14UNJ chipbreaker geometry is engineered to promote predictable chip breakage even under variable depth-of-cut and feed conditions typical in stainless steel turning. Controlled chips reduce the chance of tool damage and workpiece surface problems, improving operator safety and downstream handling. The insert’s design supports repeatable performance in both semi-finishing and more demanding roughing passes, enabling consistent production runs. Practical integration and handling in production environments As an indexable insert, the component fits standard toolholders that accept the TS16 series designation, simplifying tool inventory and reducing setup time. The coated grade and chipbreaker combination reduce the need for frequent monitoring during runs, freeing technicians to focus on throughput and quality assurance tasks. Documentation and machining parameters can be standardised for series production, supporting process stability across batches. For machining applications where consistent performance in rostfreie Stähle matters, contact Metav Werkzeuge to discuss toolholder compatibility or to request cutting data tailored to the workpiece and machine tool. Technical data Article number: TS16-ER14UNJ-WMP22G-WALTER SKU: TS16-ER14UNJ-WMP22G-WALTER Type: Indexable turning insert Grade: WMP22G Series: Tiger‑tec Gold Chipbreaker: ER14UNJ Manufacturer: Walter Tools Facts Material group suitability: M (stainless steel) Coating technology: Tiger‑tec Gold Carbide type: coated hardmetal Application range: medium to robust machining conditions Special features Designed for stable chip formation Optimised for rostfreie Stähle Enhanced edge stability and wear resistance Fits TS16 indexable insert holders FAQ What materials is this insert intended for? The TS16-ER14UNJ WMP22G insert is intended primarily for stainless steel machining (ISO group M) and is engineered to manage the toughness and heat characteristics of those alloys. How does the Tiger‑tec Gold coating benefit production runs? The Tiger‑tec Gold coating increases thermal and wear resistance, which helps to prolong the cutting edge life of the WMP22G grade and reduces the frequency of tool changes during production. Is the ER14UNJ chipbreaker suitable for roughing and finishing? Yes, the ER14UNJ chipbreaker promotes controlled chip formation across a range of feeds and depths, making it suitable for both semi-finishing and more robust roughing operations. Can this insert be used in standard TS16 toolholders? The indexable insert matches the TS16 series designation and is compatible with toolholders designed for TS16 inserts; toolholder specifications should be checked for seat and clamping compatibility. What performance improvements can be expected compared with general-purpose grades? Compared with generic grades, the dedicated WMP22G formulation combined with Tiger‑tec Gold coating typically yields better edge stability, improved surface quality on rostfreie Stähle and longer usable tool life under comparable cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and Walter Tools. The item offered is original, factory‑new merchandise of the manufacturer.
TS16-ER14UNJ WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP32G coated-carbide grade and a dedicated ER14UNJ chipbreaker for reliable machining of rostfreier Stahl; order supply or request advice via Metav Werkzeuge for seamless tool integration. TS16-ER14UNJ WMP32G indexable turning insert for rostfreier Stahl — Walter Tools TS16-ER14UNJ WMP32G is a coated-carbide indexable turning insert engineered for robust, heat-challenging machining of rostfreier Stahl in medium to heavy cutting conditions. Tiger·tec Gold coating for edge stability WMP32G: coated carbide grade M ER14UNJ chipbreaker for controlled chips Designed for rostfreier Stahl machining Increased productivity when machining rostfreier Stahl The combination of the Tiger·tec Gold technology with the WMP32G grade delivers a balance of thermal resistance and toughness that supports sustained cutting performance when machining rostfreier Stahl. The coated-carbide construction reduces flank wear and helps to avoid built-up edge under high temperatures; this results in longer intervals between index changes and fewer interruptions to production. By focusing on measurable improvements to edge life and process reliability, the insert supports faster cycle times and a more predictable throughput in serial turning applications. Reliable chip control and consistent surface quality The ER14UNJ chipbreaker geometry is optimised to produce short, repeatable chips during turning of difficult-to-machine alloys. Stable chip formation reduces the risk of re-cutting and tool dwell, which in turn improves surface finish and reduces secondary operations. The indexable design also enables quick edge rotation, cutting downtime and tool handling time. For workshop planners and production engineers, this delivers a clear efficiency advantage: improved part quality with lower rework rates and dependable tool-change intervals. Simple integration and clear application scope The insert follows standard TS16 geometry and is compatible with tool holders designed for that form factor, making retrofitting into existing toolsets straightforward. As a turning insert from Walter Tools with the WMP32G grade it is aimed specifically at rostfreier Stahl under medium to robust cutting regimes; this focused application guidance helps to avoid misapplication and supports process stability. Selection of cutting parameters should follow manufacturer recommendations for coated carbide grades, with attention to coolant strategy and feed to maintain the optimised balance between tool life and productivity. For technical guidance or to secure component supply, contact Metav Werkzeuge for application advice and delivery arrangements — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the TS16-ER14UNJ WMP32G and integration into existing tooling systems. Technical Data Article number: TS16-ER14UNJ-WMP32G-WALTER Description: TS16-ER14UNJ WMP32G indexable turning insert Product type: indexable turning insert Brand: Walter Tools Facts Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER14UNJ Material group: M Special features Coating: Tiger·tec Gold (coated carbide) Application: rostfreier Stahl Geometry: TS16 form Target conditions: medium to robust cutting FAQ What materials is this insert intended for? The TS16-ER14UNJ WMP32G insert is optimised for machining rostfreier Stahl and performs best in medium to robust cutting conditions. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WMP32G grade increases thermal and abrasive resistance, resulting in improved edge life and reduced flank wear during turning of heat-prone alloys. How does the ER14UNJ chipbreaker affect machining? The ER14UNJ chipbreaker produces short, controllable chips that reduce the risk of chip entanglement and improve surface finish when turning difficult materials. Is the insert compatible with standard tool holders? The TS16 designation indicates standard TS16 geometry, so compatibility with tool holders for TS16-style inserts is expected; confirm holder specification before assembly. How often should the insert be indexed or changed? Indexing frequency depends on cutting data and workpiece batch size; the WMP32G grade with Tiger·tec Gold coating extends edge life, reducing total index changes compared with less wear-resistant grades. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used solely for explanatory purposes and do not imply any affiliation. The offered article is an original, factory-new product of the named manufacturer (Walter Tools).
TS16-ER14W WMP22G Wendeplatten - Walter Tools
Combine the proven Tiger‑tec Gold coating with the WMP22G grade to achieve stable chip formation and extended edge life when machining stainless steels; benefit from consistent productivity and reliable repeatability. Order the TS16-ER14W WMP22G directly via Metav Werkzeuge or request advice from our specialists. TS16-ER14W WMP22G indexable turning insert – Tiger‑tec Gold grade for stainless steels | Walter Tools TS16-ER14W WMP22G is an indexable turning insert optimised for secure chip control and durable cutting performance in stainless steel machining. Tiger‑tec Gold coating for long tool life Optimised chip control ER14W Designed for stainless steels (M) Consistent cutting performance under demanding stainless steel conditions The Tiger‑tec Gold coating combined with the WMP22G grade provides a robust, coated carbide solution tailored for the challenges of machining stainless steels. High toughness and a tendency to form built-up edge are common with these materials; the chosen grade supports a stable cutting edge and reduces the risk of premature wear. This results in fewer insert changes and more predictable cycle times, which contributes to improved machining throughput and lower unit costs in production. Reliable chip control and process stability Equipped with the ER14W chipbreaker geometry, the insert promotes consistent chip formation and evacuation, particularly in medium to robust cutting conditions. Stable chips reduce the likelihood of surface damage and protect both the tool and the workpiece, leading to improved surface quality and fewer reworks. For shops seeking process reliability, the combination of grade and chipbreaker supports repeatable results across batches and operators. Practical benefits for shop-floor productivity The coated carbide chemistry and proven series design translate into longer edge life and reduced tool consumption. That means fewer tool changes and less downtime per shift, supporting higher overall equipment effectiveness. The insert’s specification addresses the typical thermal and mechanical demands of stainless steel cutting, enabling reliable performance on parts where heat generation and material ductility would otherwise limit productivity. Choose Walter Tools Tiger‑tec Gold (WMP22G) for secure stainless steel turning and contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: TS16-ER14W-WMP22G-WALTER Product designation: TS16-ER14W WMP22G Product type: Indexable turning insert (Drehwendeschneidplatte) Grade: WMP22G Series: Tiger‑tec Gold Chipbreaker: ER14W Material group: M Facts No dimensional data provided Special features Coating: Tiger‑tec Gold Carbide: coated hardmetal grade Application: suited for rostfreier Stahl (stainless steels) Optimised for medium to robust cutting conditions Stable chip formation and improved edge life Manufacturer: Walter Tools FAQ What materials is this insert intended for? The TS16-ER14W WMP22G turning insert is intended primarily for machining stainless steels (material group M), offering stable cutting and controlled chip formation. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating increases wear resistance and thermal stability, which extends tool life and supports consistent performance under the thermal loads typical of stainless steel turning. What role does the ER14W chipbreaker play? The ER14W chipbreaker is designed to produce short, controllable chips in a range of cutting conditions, improving surface finish and minimising interference with the toolpath. Is this grade suitable for light finishing operations on stainless steel? Yes, the WMP22G grade delivers a balance of toughness and wear resistance appropriate for both finishing and medium robustness cuts in stainless steel applications. Can the insert improve machine uptime? By offering longer edge life and reliable chip control, the insert helps reduce tool changes and associated downtime, contributing to improved machine availability. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com The Walter AG (brand appearance: Walter Tools) is a leading provider of precision metalworking tools. The company is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners and are cited here for explanation only. There is no affiliation between our company and the trademark owners. The offered item is an original, factory-new product from the manufacturer.
TS16-ER14W WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WMP32G grade for reliable machining of stainless steel; the ER14W chipbreaker ensures controlled chip formation and consistent productivity. Order the insert directly via Metav Werkzeuge or consult the team for application advice. TS16-ER14W WMP32G Drehwendeschneidplatte – Tiger‑tec Gold grade for stainless steel | Walter Tools The TS16-ER14W WMP32G is a coated turning insert engineered for medium to robust turning of stainless steel, offering stable edge behaviour and reliable chip control in demanding shop‑floor conditions. Tiger‑tec Gold coated for extended tool life Optimised for stainless steel applications Stable chip formation with ER14W chipbreaker Reliable edge stability for demanding stainless steel work The insert’s WMP32G grade, developed within the Tiger‑tec Gold family, targets the specific challenges of machining stainless steel, which is prone to work hardening and high thermal loads. The combination of a coated carbide substrate and a dedicated chipbreaker delivers stable chip formation and reduced adhesion at the cutting edge. In practice, this means fewer unplanned tool changes and improved process predictability when turning tougher materials. The chip geometry contributes to consistent chip evacuation, lowering the risk of built‑up edge and supporting repeatable dimension control in series production. Increased productivity through predictable wear behaviour Designed for medium to robust conditions, the insert’s coating technology reduces flank and crater wear, extending usable tool life and maintaining surface quality over longer cycles. The ER14W chipbreaker is optimised to control chip shape and thickness, which reduces machining interruptions and improves cycle time. For operations where tool changeover time and machine uptime determine output, the grade’s balanced wear resistance supports a favourable cost‑per‑component ratio and simpler tool management. Technical teams benefit from clearer wear patterns that ease regrinding or replacement decisions and allow more accurate planning of production runs. Seamless integration and process security on the shop floor As part of the Tiger‑tec Gold series from Walter Tools, this turning solution is intended for quick integration into established turning systems and standard toolholders. The geometry and material pairing support predictable heat behaviour and repeatable cutting forces, which assists in stabilising downstream processes such as finishing and inspection. The insert is particularly suited where consistent surface integrity and component tolerances are essential, enabling operators and engineers to rely on process stability rather than frequent parameter adjustments. For procurement and process planning, the clear designation makes replacement and inventory management straightforward. For tailored recommendations on the Tiger‑tec Gold grade and fast ordering, contact Metav Werkzeuge for application support and delivery coordination. Technical data SKU: TS16-ER14W-WMP32G-WALTER Name: Drehwendeschneidplatte TS16-ER14W WMP32G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Grade: WMP32G Core data Material group: M Application: stainless steel Chipbreaker: ER14W ISO designation: TS16-ER14W WMP32G UID: TS16-ER14W-WMP32G-WALTER Special features Series: Tiger·tec Gold Carbide class: coated carbide Sort description: WMP32G for rostfreie Stähle, coated hardmetal Suitable for medium to robust machining conditions Optimised chip formation and stable cutting edge FAQ What materials is this insert intended for? The TS16-ER14W WMP32G is specified for machining stainless steel and was developed to handle the toughness and heat sensitivity typical of that material group. What is the benefit of the Tiger‑tec Gold technology? Tiger‑tec Gold provides a hard, wear‑resistant coating that increases tool life and improves edge stability for the WMP32G grade, reducing downtime and enhancing process reliability. Which chipbreaker does the insert use and why is it important? This insert features the ER14W chipbreaker, which controls chip shape and evacuation to prevent built‑up edge and maintain consistent surface quality during turning. How does the WMP32G grade affect production planning? The WMP32G grade shows predictable wear patterns and consistent performance on stainless steel, allowing more accurate scheduling of tool changes and improved machine uptime. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TS16-ER14W-F5 WMP32G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating and the WMP32G grade for reliable cutting-edge stability and improved chip control when machining stainless steels; this yields consistent results under medium to robust conditions. Order the TS16-ER14W-F5 WMP32G insert directly via Metav Werkzeuge or consult our specialists for application-specific guidance. TS16-ER14W-F5 WMP32G — Indexable turning insert with Tiger·tec Gold coating (Walter Tools) TS16-ER14W-F5 WMP32G is an indexable turning insert engineered for secure chip formation and repeatable performance when machining stainless steel in demanding production environments. Tiger·tec Gold coating for extended tool life Optimised chip formation for stainless steel Coated carbide grade WMP32G for robust conditions Stable cutting edge under medium to heavy cuts Extended tool life through advanced coating technology The combination of Tiger·tec Gold and the WMP32G coated carbide grade provides a clear advantage in wear resistance and thermal stability. This coating system reduces flank wear and preserves the geometry of the cutting edge over longer tool life, which translates into fewer indexings and less tooling changeover time. For operations that face elevated temperatures and built-up edge tendencies—typical with stainless steel—this insert supports a more consistent production flow and reduces intervention frequency on the machine. Reliable chip control tailored for stainless steel The integrated chipbreaker ER14W-F5 promotes controlled chip segmentation and evacuation when turning stainless materials. By managing chip flow, the insert lowers the risk of entanglement and surface defects, which improves process stability and reduces scrap. The chip control design also allows for safer high-feed passes and predictable behaviour during interrupted cuts, helping to secure cycle-time reductions without compromising surface integrity. Performance in medium to robust machining conditions Designed for repeatable performance, the insert maintains a stable cutting edge under tougher cutting regimes. The coated carbide structure supports machining strategies that prioritise productivity—such as slightly increased feeds or depths of cut—while retaining dimensional accuracy and surface quality. This makes the grade particularly suitable for batch production or components with frequent tool engagement where operator intervention must be minimised. Practical selection and application advice When integrating this insert into a toolholder system, consider tooling stiffness, coolant strategy and cutting parameters adapted for stainless steel to exploit the Tiger·tec Gold advantages fully. The indexable format eases replacement and inventory management compared with brazed or solid tools. For specific cutting-data recommendations and optimisation of feed and speed for a given stainless grade, lean on application data and Metav Werkzeuge’s consulting services to fine-tune process parameters and reach the expected productivity gains. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold WMP32G inserts and ensure optimal cutting results for stainless steel components — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TS16-ER14W-F5-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-ER14W-F5 WMP32G Walter Tools Product type: Drehwendeschneidplatte (indexable turning insert) Brand: Walter Tools Series: Tiger-tec Gold Grade: WMP32G Chipbreaker: ER14W-F5 Designation: TS16-ER14W-F5 WMP32G Facts Material group: M Suitable for: stainless steel (ISO M) Coating technology: Tiger·tec Gold Application conditions: medium to robust Special features Coated carbide grade WMP32G Optimised chip formation (ER14W-F5) Stable cutting edge for repeatable performance Intended for stainless steel machining Indexable insert format for quick indexing FAQ What materials is the TS16-ER14W-F5 WMP32G primarily intended for? The TS16-ER14W-F5 WMP32G insert is designed primarily for stainless steel (ISO M), providing secure chip formation and edge stability under medium to robust conditions. How does the Tiger·tec Gold coating benefit production runs? The Tiger·tec Gold coating on the WMP32G grade improves wear resistance and thermal stability, which reduces flank wear and extends effective tool life during continuous production. What is the role of the ER14W-F5 chipbreaker? The ER14W-F5 chipbreaker is engineered to control chip shape and evacuation when turning stainless steel, lowering the risk of entanglement and improving surface quality. Can this insert be used for high-feed or interrupted cutting? Yes — thanks to the combination of the coated carbide grade and the chipbreaker design, the insert supports higher-feed strategies and shows robust behaviour during interrupted cuts, maintaining a stable cutting edge. Where to get tailored cutting parameters for specific stainless grades? For application-specific cutting data and optimisation, Metav Werkzeuge can provide guidance and parameter recommendations for the TS16-ER14W-F5 WMP32G in given production scenarios. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is original, factory-new goods of the manufacturer (Walter Tools).
TS16-ER16ACME WMP32G Wendeplatten - Walter Tools
Die Kombination aus der beschichteten Hartmetallsorte WMP32G, dem Tiger·tec Gold-System und dem ER16ACME-Spanformer sorgt für zuverlässige Schneidkanten und stabile Spanbildung bei der Bearbeitung von rostfreiem Stahl; für einkaufssichere Bestellungen steht Metav Werkzeuge zur Verfügung oder die technischen Berater können weiterhelfen. TS16-ER16ACME WMP32G — Turning indexable insert, Tiger·tec Gold, ER16ACME | Walter Tools TS16-ER16ACME WMP32G is a turning indexable insert optimised for machining rostfreier Stahl under medium to robust conditions, featuring the Tiger·tec Gold coating and an ER16ACME chipbreaker for secure chip control Tiger·tec Gold coating for edge stability WMP32G grade for rostfreier Stahl machining ER16ACME chipbreaker for reliable chip control Walter Tools quality and consistent performance Proven performance for rostfreier Stahl machining The insert uses the WMP32G grade, a coated carbide developed within the Tiger·tec Gold series to address the challenges of machining rostfreier Stahl. These materials tend to work-harden and generate heat; the combination of coating and substrate improves wear resistance and helps maintain a stable cutting edge under medium to robust cutting conditions. The result is fewer interruptions for edge changes and a predictable production flow, supporting higher machine uptime and consistent component quality. How the ER16ACME chipbreaker improves process reliability The ER16ACME chipbreaker is designed to produce short, controllable chips when cutting ductile, heat-prone alloys. By shaping chip flow and reducing the tendency for built-up edge formation, the chipbreaker reduces the risk of surface defects and tool damage. In practice, this means fewer stoppages for chip cleaning, improved surface finishes on turned parts and a lower rate of rework — clear advantages for batch and serial production of parts in rostfreier Stahl. Practical benefits and application guidance As an indexable insert from Walter Tools, this solution focuses on reproducible results and ease of handling: positive mounting geometry, a robust cutting edge and a coated substrate that supports reliable performance across a broad range of stainless grades (ISO group M). For workshops transitioning from uncoated grades, the coated substrate extends edge life; for operators it reduces the need for frequent tool changes. The indexable format simplifies stock management and speedily restores full capacity by replacing a single insert rather than an entire tool body. For machining rostfreier Stahl with consistent results, request Walter Tools' TS16-ER16ACME WMP32G inserts via Metav Werkzeuge or consult our specialists at info@metav-werkzeuge.com / +49 2822 7131930 to ensure optimal grade and chipbreaker selection Technical Data Article number: TS16-ER16ACME-WMP32G-WALTER Name: TS16-ER16ACME WMP32G Product type: Turning indexable insert Facts Grade designation: WMP32G ISO group suitability: M (rostfreier Stahl) Series: Tiger·tec Gold Special features Coating: Tiger·tec Gold Substrate: coated carbide Chipbreaker: ER16ACME Manufacturer: Walter Tools FAQ What materials is this insert intended for? This turning insert is intended primarily for machining rostfreier Stahl; the WMP32G grade targets the ISO M group. How does the Tiger·tec Gold coating benefit machining performance? The Tiger·tec Gold coating enhances wear resistance and edge retention on the WMP32G substrate, improving tool life during the turning of stainless materials. Can the insert be used for light finishing and roughing operations? The insert’s grade and ER16ACME chipbreaker support a spectrum of medium to robust cutting conditions, making it suitable for both finishing and modest roughing tasks on rostfreier Stahl. Is chip control improved with this chipbreaker? Yes, the ER16ACME chipbreaker produces shorter, controlled chips, which reduces handling issues and the risk of surface damage on workpieces. How is the insert identified for reordering? Order using the SKU TS16-ER16ACME-WMP32G-WALTER or the designation TS16-ER16ACME WMP32G from Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, brand‑new goods from the manufacturer.
TS16-ER16UN WMP22G WMP22G Wendeplatten - Walter Tools
Take advantage of the proven Tiger‑tec Gold coating and the WMP22G grade to secure stable chip formation and extended edge life when machining stainless steel; the ER16UN chipbreaker further improves process security and surface quality. Order or request application advice via Metav Werkzeuge for a reliable integration into production. TS16-ER16UN WMP22G – Indexable turning insert, Tiger‑tec Gold for stainless steel (Walter Tools) The TS16-ER16UN WMP22G is an indexable insert designed for turning operations in stainless steel, combining a coated‑carbide grade with a dedicated chipbreaker for medium to robust cutting conditions. Tiger‑tec Gold coating technology Optimised for stainless steel (M) ER16UN chipbreaker for secure chip control High edge stability for robust turning Consistent cutting performance and extended tool life The WMP22G grade, part of the Tiger‑tec Gold series, is a coated carbide developed for demanding machining of stainless steel. Its microstructure and coating promote stable chip formation, which reduces the risk of built‑up edge and minimises unexpected tool changes. For production contexts where cycle times and uptime matter, this behaviour translates into fewer interruptions and more consistent component quality. The result is predictable running behaviour and a longer effective tool life compared with uncoated grades in similar applications. Predictable chip control and surface quality The chipbreaker ER16UN is tailored to the cutting characteristics of the M group, shaping chips to avoid tangling and heat concentration. Controlled evacuation of chips supports a consistent cutting zone temperature and helps achieve improved surface finishes with reduced reliance on secondary operations. In short runs and longer production batches alike, the combination of the breaker geometry and the WMP22G coating reduces rework and supports stable process windows. Practical integration into machining processes This indexable insert is suitable for a wide range of turning tasks on stainless steel where medium to robust conditions apply. The insert’s behaviour allows for straightforward parameter selection: moderate feed rates with stable cutting speeds deliver the best compromise between tool life and productivity. In mixed‑shop environments, the grade’s versatility supports different stainless alloys without frequent grade changes, simplifying tool management. For specific cutting parameters or to confirm compatibility with a particular machine or holder, technical consultants at Metav Werkzeuge can advise on optimisation and selection. Contact Metav Werkzeuge for application advice and availability on Walter Tools Tiger‑tec Gold inserts — technical consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: TS16-ER16UN-WMP22G-WALTER Article: TS16-ER16UN WMP22G Product type: Indexable turning insert Brand: Walter Tools Facts Material group designation: M (stainless steel) Grade: WMP22G Chipbreaker designation: ER16UN Special features Series: Tiger‑tec Gold Coating: coated carbide grade (Tiger‑tec Gold) Application: machining of stainless steel (M) Chip control: ER16UN chipbreaker Designed for medium to robust cutting conditions FAQ Which materials is the TS16-ER16UN WMP22G intended for? This insert is specified for the ISO M group and is optimised for machining stainless steel under medium to robust conditions. What benefits does the Tiger‑tec Gold technology provide? Tiger‑tec Gold coating on the WMP22G grade enhances wear resistance and supports stable chip formation, improving tool life and surface consistency during turning operations. How does the ER16UN chipbreaker affect machining? The ER16UN geometry guides chip formation to safer shapes for evacuation, reducing heat concentration and promoting consistent surface finish when using the TS16-ER16UN WMP22G insert. Is the WMP22G grade suitable for high cutting speeds? WMP22G is intended to deliver balanced performance in typical turning speeds for stainless steel; specific speed and feed should be selected according to the alloy and setup to maintain edge stability. Can the insert be used across different stainless alloys without frequent grade changes? Yes, the combination of the WMP22G grade and ER16UN chip control provides versatility across many stainless alloys, reducing the need for frequent tool‑grade swaps. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (marketed as Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners. Mention of brand names is for explanation only and does not imply any affiliation. The offered item is an original, factory‑new product of Walter Tools.
TS16-ER16UN WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WMP32G grade and precise ER16UN chip control for dependable performance when machining rostfreier Stahl; order the TS16-ER16UN WMP32G directly via Metav Werkzeuge or consult our specialists for application advice. TS16-ER16UN WMP32G indexable turning insert — Tiger·tec Gold, ER16UN chipbreaker (Walter Tools) The TS16-ER16UN WMP32G is an indexable turning insert designed for secure chip formation and stable cutting when machining rostfreier Stahl under medium to robust conditions. Tiger·tec Gold coating for extended tool life WMP32G grade optimised for rostfreier Stahl ER16UN chipbreaker for predictable chip control Greater process reliability through optimised edge technology The insert’s Tiger·tec Gold coating and WMP32G substrate combine to reduce flank wear and support consistent cutting forces in demanding operations. This results in fewer unscheduled tool changes and a lower scrap rate. The ER16UN chipbreaker promotes controlled chip flow when turning tough, heat-prone materials, so machining cycles remain stable. For users transitioning from conventional grades, the coated carbide construction translates into longer effective tool life and more predictable tool-change intervals, improving throughput without requiring complex parameter adjustments. Efficiency gains that reduce downtime and increase output A focus on process efficiency underpins the design: the geometry and coating synergy deliver repeatable surface quality and reduced risk of built-up edge on rostfreier Stahl. The insert’s performance supports higher feeds and consistent cutting depths in many standard turning setups, which can shorten cycle times and reduce per-part costs. By promoting reliable chip formation and a stable cutting edge, the solution lowers the likelihood of rework and helps maintain steady production rates, which is particularly valuable in batch and continuous manufacturing environments. Practical application and toolholder compatibility This indexable turning insert is intended for conventional toolholders that accept TS16-style inserts and is suitable where medium to robust cutting conditions occur. The WMP32G grade is tailored for rostfreier Stahl, addressing the material’s tendency to work harden and generate heat. When integrating the insert into a machining cell, select cutting parameters that favour chip evacuation and take advantage of the ER16UN chipbreaker for shorter, controllable chips. For specification checks or machining trials, compatibility with existing clamping systems can be confirmed with Metav Werkzeuge’s technical advisors. Contact Metav Werkzeuge for tailored application support and to request the TS16-ER16UN WMP32G from Walter Tools; email info@metav-werkzeuge.com or call +49 2822 7131930 for fast, application-focused advice Technical data Article number: TS16-ER16UN-WMP32G-WALTER Name: Drehwendeschneidplatte TS16-ER16UN WMP32G Walter Tools Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: ER16UN Material group: M (rostfreier Stahl) Key figures No numerical data provided Design and features Coating technology: Tiger·tec Gold Substrate: coated carbide Suitable for: rostfreier Stahl Application: medium to robust cutting conditions FAQ What materials is this insert suitable for? The TS16-ER16UN WMP32G is specifically designed for machining rostfreier Stahl and performs reliably under medium to robust cutting conditions. What does the WMP32G grade provide? WMP32G is a Walter Tools coated-carbide grade within the Tiger·tec Gold family, offering improved wear resistance and stable cutting behaviour when working rostfreier Stahl. How does the ER16UN chipbreaker affect machining? The ER16UN chipbreaker promotes predictable chip formation and evacuation, which helps maintain consistent cutting forces and surface finish on rostfreier Stahl. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and trade designations are the property of their respective owners. Brand names and protected trademarks are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is original, brand-new goods from the manufacturer.
TS16-ER16UN-2 WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WMP32G grade for reliable machining of stainless steel with secure chip formation; the ER16UN-2 chipbreaker supports stable cutting edges and consistent performance. Order the TS16-ER16UN-2 WMP32G directly via Metav Werkzeuge or ask our consultants if needed. TS16-ER16UN-2 WMP32G indexable turning insert — Tiger·tec Gold for stainless steel, Walter Tools The TS16-ER16UN-2 WMP32G is an indexable turning insert developed for machining stainless steels under medium to robust conditions, combining a Tiger·tec Gold coated carbide grade with an ER16UN-2 chipbreaker to promote secure chip control and reliable edge life. Tiger·tec Gold coating for high wear resistance Designed for machining stainless steel ER16UN-2 chipbreaker for secure chip control Reliable cutting edge from Walter Tools Reliable stainless-steel machining with secure chip formation The combination of the WMP32G grade and Tiger·tec Gold coating is engineered specifically for ISO group M materials (stainless steel). In practice, this means improved chip formation and reduced tendency for built-up edge when turning ductile, work-hardening alloys. The ER16UN-2 chipbreaker geometry promotes predictable chip breakage, which reduces interruptions at the tool edge and supports longer uninterrupted cuts. These attributes translate into steadier process behaviour and fewer unplanned interventions on the shop floor. Longer service life through advanced coated carbide technology The insert’s coated carbide substrate and the Tiger·tec Gold surface treatment are selected to balance toughness and wear resistance, helping to maintain a sharp cutting edge over extended operation. For workshops focused on productivity, this leads to more consistent component quality and fewer insert changes per production batch. The grade is suited to the thermal challenges of stainless-steel turning, where control of heat and adhesion at the cutting zone is critical to extend tool life and preserve dimensional accuracy. Process stability and improved surface quality The ER16UN-2 chipbreaker is optimised for controlled chip evacuation, which improves both safety and surface finish on turned parts. Stable chip control reduces the risk of entanglement and machine downtime, while the combination of geometry and coating supports a fine and repeatable surface finish under varying feed and depth-of-cut conditions. For milling strategies that require predictable tool performance, the insert’s repeatability contributes to fewer reworks and a more efficient machining cycle. Practical application notes and integration in the workshop This insert is intended for use on toolholders compatible with its designation and is particularly effective for medium to robust stainless-steel turning tasks where secure chip control and edge stability are priorities. The ISO marking (M) clarifies material suitability and helps in tool selection for batch production or bespoke component machining. For further application data, tooling recommendations or assistance with integration, Metav Werkzeuge provides technical advice and can supply the insert alongside compatible holders and documentation. Contact information: info@metav-werkzeuge.com, +49 2822 7131930. For reliable stainless-steel performance with Walter Tools’ Tiger·tec Gold grade, contact Metav Werkzeuge for tailored recommendations and procurement assistance: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: TS16-ER16UN-2-WMP32G-WALTER Product type: Indexable turning insert Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER16UN-2 Facts Material group: M (stainless steel) Coating: Tiger·tec Gold (coated carbide) Suitability: medium to robust machining conditions Special features Coated carbide grade optimised for stainless steel ER16UN-2 chipbreaker for secure chip control Designed by Walter Tools for consistent cutting-edge stability FAQ Which materials is this insert suitable for? The TS16-ER16UN-2 WMP32G by Walter Tools is intended primarily for stainless steel (ISO group M), offering improved chip control and edge stability in medium to robust turning applications. What does the WMP32G grade indicate? WMP32G denotes a Walter Tools coated carbide grade within the Tiger·tec Gold technology, optimised for a balance of toughness and wear resistance during stainless-steel machining. How does the ER16UN-2 chipbreaker help in production? The ER16UN-2 chipbreaker on this insert promotes predictable chip formation and evacuation, reducing interruptions and contributing to a more stable machining process and improved surface quality. Can the insert be used for light finishing cuts? While the TS16-ER16UN-2 WMP32G is designed for medium to robust conditions, its coating and edge stability also support controlled finishing operations when selected with appropriate feeds and toolholders. Is this insert part of a recognised product series? Yes, the insert belongs to the Tiger·tec Gold series by Walter Tools, which focuses on enhanced process reliability and consistent tool life for demanding materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used here solely for explanation and identification of original factory-new products. There is no affiliation between our company and the named brands.
TS16-ER16UN-F5 WMP32G Wendeplatten - Walter Tools
Taking advantage of Tiger‑tec Gold technology and the WMP32G grade ensures stable chip formation and reliable edge life when machining rostfreier Stahl; combine this with the ER16UN‑F5 chipbreaker for controlled swarf evacuation and expect consistent productivity in demanding turning operations — order via Metav Werkzeuge or request application advice from our consultants. TS16-ER16UN-F5 WMP32G turning insert — Tiger‑tec Gold coated for rostfreier Stahl | Walter Tools TS16-ER16UN-F5 WMP32G is a coated carbide turning insert from the Tiger‑tec Gold series, optimised for safe chip control and robust performance when machining rostfreier Stahl under medium to demanding conditions Tiger‑tec Gold coating for heat resistance WMP32G grade for rostfreier Stahl ER16UN‑F5 chipbreaker for controlled chips Reliable machining performance for rostfreier Stahl The Tiger‑tec Gold WMP32G grade combines a coated carbide substrate with a surface engineering designed to resist thermal loading and adhesive wear during turning of rostfreier Stahl. This results in stable chip formation and reduced tendency to build up on the cutting edge, which in turn leads to more predictable tool life and fewer interruptions for edge dressing. For production environments seeking repeatability, the coated chemistry supports consistent dimensional results when using appropriate cutting data and coolant strategies. Predictable edge life and process security for productive turning The integrated ER16UN‑F5 chipbreaker is engineered to generate short, controllable chips in medium to robust cutting regimes, which improves swarf handling and machine uptime. The combination of grade and chip geometry enhances process security by maintaining a stable cutting edge under variable loads. For operations where cycle stability and tool-change planning are priorities, this insert type contributes directly to higher throughput and lower rework rates without sacrificing surface quality. Practical use and machining guidance in the workshop The TS16 designation denotes the insert geometry and clamping interface; paired with compatible tool holders, the insert offers straightforward installation and repeatable seating accuracy. When machining rostfreier Stahl, favour moderate cutting speeds and sufficient lubrication or cooling to prevent excessive heat concentration, and monitor chip form as an indicator of optimal cutting parameters. The insert’s design supports operators and process engineers in achieving a balance between productivity and component surface integrity. For application-specific recommendations on Walter Tools Tiger‑tec Gold inserts and availability, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and ordering support Technical data SKU: TS16-ER16UN-F5-WMP32G-WALTER Name: TS16-ER16UN-F5 WMP32G Type: Turning indexable insert Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: ER16UN‑F5 Core data Application group: M (rostfreie Stahl) Material code: M Geometry designation: TS16‑ER16UN‑F5 Manufacturer code: Walter Tools UID: TS16-ER16UN-F5-WMP32G-WALTER Special features Coating technology: Tiger‑tec Gold Substrate: coated carbide Optimised for: rostfreie Stahl machining Designed for stable chip formation and reliable edge life Suitable for medium to robust cutting conditions FAQ What materials is this insert suited to machine? The TS16-ER16UN-F5 WMP32G insert is optimised for rostfreie Stahl (ISO group M) and provides controlled chip formation for stainless applications. How does the Tiger‑tec Gold coating affect performance? The Tiger‑tec Gold coating on the WMP32G grade improves resistance to heat and adhesive wear, supporting longer edge life and consistent results when turning rostfreie Stahl. Which chipbreaker is integrated and what is its benefit? The ER16UN‑F5 chipbreaker delivers short, manageable chips in medium to robust cuts, improving swarf evacuation and process stability for continuous turning operations. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any affiliation between Metav Werkzeuge and the named manufacturers. The described article is an original, factory‑new product of the respective manufacturer.
TS16-ER16UNJ WMP22G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WMP22G grade for stable chip formation and reliable edge life; order genuine Walter Tools inserts through Metav Werkzeuge or consult our application specialists for tailored advice. TS16-ER16UNJ WMP22G indexable turning insert by Walter Tools — Tiger·tec Gold, ER16UNJ chipbreaker for rostfreier Stahl TS16-ER16UNJ WMP22G is an indexable turning insert designed for medium to robust machining of rostfreier Stahl, offering high edge stability and consistent chip control Tiger·tec Gold coated grade WMP22G Optimised chip control ER16UNJ geometry Designed for rostfreier Stahl machining Coated cemented carbide with high edge stability Reliable cutting performance for demanding rostfreier Stahl applications The coated cemented carbide grade WMP22G, realised through Tiger·tec Gold technology, provides consistent performance when machining rostfreier Stahl. The coating improves thermal resistance and reduces built-up edge, which in turn stabilises the cutting edge under elevated cutting temperatures typical for these alloys. For production environments this means fewer insert changes, more predictable tool life and a smoother process flow. The described combination supports safe chip formation and reduces the risk of surface defects that can arise from material adhesion or excess heat. Predictable chip control and geometry benefits for efficient turning The ER16UNJ chipbreaker geometry is engineered to guide chips away from the cutting zone and to promote short, controllable chip forms on ductile materials. Short, consistent chips improve process safety and ease chip evacuation in automated machines or multi-tool setups. The insert geometry also reduces cutting forces spikes, which benefits machine spindle loads and contributes to a steady surface finish. Understanding this, planners can optimise feed and cutting speed windows for higher throughput with reduced downtime for chip management. Process economy through durability and reproducible results Using a coated grade with stable edge behaviour reduces the frequency of index changes and toolholder adjustments. The result is improved overall equipment effectiveness: longer uninterrupted cycles, fewer quality rejects and reduced labour for inspection and rework. The insert’s coated cemented carbide composition supports repeatable performance across serial production, making it suitable for medium to robust cutting conditions often encountered in component manufacturing and repair workshops. Selection and handling guidance for consistent outcomes When choosing an insert for rostfreier Stahl, consider the interaction of grade, coating and chipbreaker geometry. The TS16-ER16UNJ geometry paired with WMP22G is optimised for materials that tend to work-harden and produce adhesives on the cutting edge; the coated surface helps prevent adhesion while maintaining wear resistance. For best results, combine appropriate coolant strategy and steady feeds; monitor tool wear patterns rather than aiming solely for maximum cutting speeds. Spare inserts should be stocked to match production cycles to avoid interruptions. Contact Metav Werkzeuge for application-specific recommendations and to source genuine Walter Tools TS16-ER16UNJ WMP22G inserts through our catalogue or technical sales team Technical Data Article number: TS16-ER16UNJ-WMP22G-WALTER Article name: Drehwendeschneidplatte TS16-ER16UNJ WMP22G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Insert designation: TS16-ER16UNJ WMP22G Grade: WMP22G Series: Tiger-tec Gold Facts Material group: M (rostfreie Stähle) Chipbreaker: ER16UNJ Geometry: TS16-ER16UNJ Special features Coating technology: Tiger·tec Gold Substrate: coated cemented carbide Application: medium to robust conditions on rostfreier Stahl Benefit: stable chip formation and reliable edge life FAQ What materials is this insert designed for? The TS16-ER16UNJ WMP22G insert is designed primarily for machining rostfreier Stahl, with the grade and chipbreaker tailored to handle the toughness and heat-sensitivity of these alloys. What does the WMP22G grade offer compared with standard grades? WMP22G, part of the Tiger·tec Gold family, combines a wear-resistant coating and a robust substrate to deliver improved thermal stability and longer edge life when turning rostfreier Stahl. How does the ER16UNJ chipbreaker improve machining? The ER16UNJ chipbreaker promotes short, controllable chips, reducing chip entanglement and enabling safer evacuation, which is especially useful in automated and multi-station operations. Is this insert suited for finishing operations? Yes, the geometry and coating support consistent surface quality in finishing when cutting parameters are adjusted to the intended final tolerance and surface requirement. Can the insert be used in high-volume production? The combination of WMP22G grade and Tiger·tec Gold coating provides reproducible tool life and stable cutting behaviour, making it a sound choice for serial production of rostfreier Stahl components. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-ER16UNJ WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the ER16UNJ chipformer for secure chip control and consistent tool life in stainless steel turning; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TS16-ER16UNJ WMP32G turning insert – coated carbide, for stainless steel | Walter Tools The TS16-ER16UNJ WMP32G is a coated carbide turning insert engineered for dependable chip control and consistent performance in stainless steel turning applications. Tiger·tec Gold coated carbide grade WMP32G Optimised ER16UNJ chipformer for secure chip control Designed for stainless steel (ISO M) applications Robust performance in medium to heavy cutting Consistent machining of stainless steels through targeted coating technology The Tiger·tec Gold WMP32G grade combines a wear-resistant coating with a substrate tailored for demanding turning operations in stainless steel (ISO M). This pairing minimises built-up edge and reduces flank wear, which directly translates into longer tool life and fewer tool changes. The ER16UNJ chipformer is designed to produce stable, controllable chips under the typical heat and work-hardening tendencies of austenitic and martensitic stainless grades; as a result, cycle times remain predictable and surface finish quality is maintained across varying depths of cut. Improved productivity and process security in series production A coated carbide insert from the Tiger·tec Gold family offers predictable performance in medium to heavy cutting conditions. The combination of a stable cutting edge and a tailored chipformer supports higher metal removal rates with reduced risk of interruption. This leads to measurable productivity gains and lower per-part tooling costs over extended production runs. By focusing on repeatable cutting behaviour and reduced wear, the insert helps secure process windows and simplifies setup parameters for batch machining. Practical application notes and shop-floor advantages The insert is intended primarily for turning operations in stainless steels and similar challenging alloys where secure chip formation is critical. The indexable format enables quick replacement and consistent geometry, reducing spindle downtime. In practice, pairing the insert with suitable grade-appropriate cutting data and coolant strategies will enhance performance: moderate cutting speeds, controlled feeds and optimised depths of cut prevent excessive heat build-up and promote stable chip breaking. For bespoke machining scenarios or material mixes, Walter Tools application data provides further guidance to align cutting parameters with part finish and tool life goals. For application-specific advice or to place an order for Walter Tools turning inserts, contact Metav Werkzeuge for technical consultation and fast delivery assistance. Technical Data SKU: TS16-ER16UNJ-WMP32G-WALTER Designation: TS16-ER16UNJ WMP32G Product type: Turning insert Grade: WMP32G Series: Tiger·tec Gold Facts Chipformer: ER16UNJ Material code: M (stainless steel / ISO M) Intended application: Turning of stainless steels Manufacturer: Walter Tools Special features Coating technology: Tiger·tec Gold Coated carbide (hardmetal) grade Stable cutting edge for medium to heavy conditions Optimised chip control for reduced built-up edge FAQ What materials is this insert suitable for? The TS16-ER16UNJ WMP32G insert is formulated for machining stainless steel (ISO M) and performs well under the typical heat and toughness conditions of those alloys. How does the ER16UNJ chipformer benefit production? The ER16UNJ chipformer promotes stable, short chips in turning applications, which improves machine uptime and reduces the risk of chip entanglement during continuous operations. Is this insert part of a larger Walter Tools series? Yes, the grade belongs to the Tiger·tec Gold series from Walter Tools, combining advanced coating technology with a robust substrate for enhanced wear resistance. Can the insert be used for finishing and semi-finishing passes? The insert is suitable for both finishing and semi-finishing in stainless steel when cutting data is adjusted to the required surface finish and tool-life expectations. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
TS16-ER16W WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WMP32G grade for secure chip formation and stable cutting edges when machining stainless steel; order directly via Metav Werkzeuge or consult the team for application support. TS16-ER16W WMP32G Turning Insert for stainless steel (ER16W, Tiger‑tec Gold) — Walter Tools The TS16-ER16W WMP32G is a coated carbide turning insert engineered for reliable chip control and stable edge life in the machining of stainless steel, suitable for medium to robust cutting conditions. Tiger‑tec Gold coating for secure chip control WMP32G coated carbide grade for stainless steel ER16W chipbreaker for medium to heavy cuts Walter Tools quality with stable cutting edges Consistent performance on stainless steel for fewer interruptions The insert belongs to the Tiger‑tec Gold series and the WMP32G grade, a coated carbide combination developed for the particular demands of stainless steel. These materials tend to be tough and generate heat and built-up edge; therefore, the insert’s coating and grade support secure chip formation and a durable cutting edge, which reduces unscheduled stoppages and regrinds. In practice, that means greater process stability and fewer tool changes on series production runs, improving overall machine utilisation without complex parameter changes. Predictable chip control that raises productivity Equipped with the ER16W chipbreaker, the geometry is optimised to form controllable chips under medium to heavier cutting regimes. Predictable chip flow reduces the risk of component damage and shortens intermittent machining interruptions, which in turn leads to more consistent cycle times and lower rework rates. The chipbreaker’s design works in concert with the WMP32G grade to maintain a stable edge over extended runs, giving tangible benefits to throughput and workplace safety in industrial turning applications. Clear application range and simple integration into tooling systems The designation indicates suitability for ISO group M, i.e. rostfreie Stähle, and the insert matches standard toolholders that accept the TS16 form. The technical focus is on achieving reliable cutting under the higher heat and ductility typical of these alloys; the coated carbide composition offers wear resistance while promoting a repeatable cutting behaviour. For shops seeking a pragmatic solution for stainless steel components, this insert provides a balance of tool life and cutting performance that integrates readily into existing production setups without the need for extensive trial-and-error. For application advice, compatibility checks or availability of the Walter Tools TS16-ER16W WMP32G turning insert, please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical support and ordering assistance Technical data Article number: TS16-ER16W-WMP32G-WALTER Article designation: TS16-ER16W WMP32G Product type: Turning insert Manufacturer: Walter Tools Facts Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: ER16W Material group: M (rostfreie Stähle) ISO designation: TS16-ER16W WMP32G Special features Coated carbide construction Optimised for secure chip formation Stable cutting edge for medium to robust conditions Designed by Walter Tools for industrial turning FAQ What materials is this insert designed for? The TS16-ER16W WMP32G turning insert is designed specifically for stainless steel (ISO group M) and is optimised for the challenges those alloys present. Which chipbreaker does the insert use and what is its benefit? The insert features the ER16W chipbreaker; this geometry promotes predictable chip control under medium to heavier cutting, reducing interruptions and improving cycle stability. Is the TS16-ER16W WMP32G suitable for delicate finishing operations? The WMP32G grade and ER16W geometry are aimed at medium to robust conditions; for very fine finishing, alternative geometries or grades may better match the required surface specification. How does the Tiger‑tec Gold series improve performance? The Tiger‑tec Gold coating enhances wear resistance and supports consistent chip formation, which together contribute to longer tool life and improved process reliability in stainless steel machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is a brand of Walter AG and part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
TS16-ER18NPT WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of reliable edge life, stable chip control and the Tiger·tec Gold coating for repeatable results in rostfreier Stahl turning operations. Order the insert directly via Metav Werkzeuge or contact our consultants for application-specific advice. TS16-ER18NPT WMP32G indexable turning insert — Tiger·tec Gold grade by Walter Tools The TS16-ER18NPT WMP32G is an indexable turning insert designed for secure machining of rostfreier Stahl in medium to robust cutting conditions. Tiger·tec Gold coating for increased wear resistance WMP32G grade optimised for rostfreier Stahl machining ER18NPT chipbreaker ensures stable chip formation Suitable for medium to robust cutting conditions Consistent edge performance for rostfreier Stahl machining The WMP32G grade, developed within the Tiger·tec Gold series, delivers a balance of wear resistance and toughness tailored to the demands of rostfreier Stahl. Coated carbide substrates resist thermal degradation and promote stable chip formation, which reduces edge build-up and prolongs effective cutting life. For operations that require repeatable dimensional accuracy, this combination reduces interruptions for tool changes and supports continuous production runs with fewer quality deviations. Controlled chips and improved surface results The ER18NPT chipbreaker is engineered to manage the typical adhesion and ductility of rostfreier Stahl, producing short, stable chips even under higher temperatures. Controlled chip shape reduces the risk of surface damage and tool nose wear, helping to maintain consistent workpiece finish and reducing secondary operations. Explained simply: a dedicated chip geometry diverts energy away from forming long, stringy swarf and towards predictable shearing, resulting in better productivity and fewer stopped cycles. Productivity gains through material and coating synergy Combining a coated carbide grade with a process-oriented chipbreaker leads to measurable productivity benefits. The coating chemistry of Tiger·tec Gold enhances the insert’s tolerance to heat and abrasion, enabling longer cutting intervals and higher throughput with unchanged clamping and set-up times. The insert’s construction supports repeatable indexability, so tool bodies can be used more efficiently and inventory complexity is reduced — a practical advantage for job shops and production lines seeking cost-effective stability. Discuss specific machining parameters and selection for your rostfreier Stahl applications with Metav Werkzeuge; contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to determine the best insert configuration for the process Technical data Article number: TS16-ER18NPT-WMP32G-WALTER Designation: TS16-ER18NPT WMP32G Brand: Walter Tools Product type: Indexable turning insert Facts Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER18NPT Material group: M (rostfreier Stahl) Special features Coated carbide (Tiger·tec Gold technology) Optimised for rostfreier Stahl applications Suitable for medium to robust cutting conditions Stable chip formation and improved edge life FAQ What materials is this insert intended for? The TS16-ER18NPT WMP32G is developed for machining rostfreier Stahl and supports medium to robust cutting conditions with good chip control. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold increases resistance to heat and abrasion, extending the insert’s cutting intervals and contributing to consistent performance in rostfreier Stahl turning. What advantage does the ER18NPT chipbreaker provide? The ER18NPT chipbreaker produces short, controllable chips, reducing workpiece surface damage and lowering the frequency of interruptions for chip removal. Can this insert be used for finishing operations? Yes — with appropriate cutting parameters the insert supports consistent surface quality; adjust feed and speed according to the workpiece specification and machine capability. Is the TS16-ER18NPT WMP32G suitable for automated turning centres? The coated grade and chip control characteristics make this insert well suited to automated environments where stability and repeatability are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods from the manufacturer. Walter Tools is used here in relation to the product data provided.
TS16-ER18NPTF WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, WMP32G carbide grade and the ER18NPTF chipbreaker for reliable stainless steel turning, delivering improved tool life and consistent surface quality; order the TS16-ER18NPTF WMP32G indexable turning insert directly via Metav Werkzeuge or ask our consultants if needed. TS16-ER18NPTF WMP32G indexable turning insert – Tiger·tec Gold for stainless steel | Walter Tools The TS16-ER18NPTF WMP32G is an indexable turning insert engineered for medium to robust turning operations in stainless steel, offering stable cutting behaviour and predictable chip formation. Tiger·tec Gold coating for extended tool life WMP32G grade optimised for stainless steel ER18NPTF chipbreaker for reliable chip control Greater process stability when machining stainless steel The combination of the WMP32G cemented carbide grade and the Tiger·tec Gold coating provides stable cutting under the demanding conditions typical of stainless steel machining. Austenitic and other stainless grades tend to generate heat and cause material adhesion on the cutting edge; the coated substrate promotes thermal resistance and reduces the risk of built-up edge, resulting in fewer interruptions and a more predictable production flow. This leads to a measurable reduction in tool changes and improved component consistency in serial manufacturing. Reliable chip control and surface quality Chip formation is a decisive factor for efficiency in turning processes. The ER18NPTF chipbreaker is designed to promote short, controllable chips when working in sticky or gummy materials, aiding swarf evacuation and reducing the risk of surface damage. Controlled chip flow contributes directly to a consistent surface finish and lower rework rates, while the combination of geometry and coating supports a durable cutting edge that maintains dimensional accuracy over longer tool life. Practical guidance for machining and fixture setup For best results with this insert, a stable machine setup and rigid toolholding are recommended to harness the indexable insert’s full potential in medium to robust operations. The insert’s geometry is optimised for reliable engagement and repeatable performance; in practice this means steady feeds and avoidance of chatter produce the most consistent outcomes. Where process stability is critical, pairing this insert with appropriate holder and clamping choices minimises vibrations and secures the expected productivity gains. Application range and economic impact Designed specifically for the ISO group M, this insert supports a wide range of stainless steel applications where toughness and heat generation challenge conventional grades. The WMP32G grade promotes stable chip formation and edge retention across common austenitic and corrosion-resistant steels, which can translate into longer intervals between indexings and lower tooling consumption. Over multiple production cycles, the improved tool life and reduced scrap rates contribute to measurable cost-efficiency and a more predictable machining process. For process-stable stainless steel turning applications, specify the Walter Tools TS16-ER18NPTF WMP32G via Metav Werkzeuge for rapid availability and professional specification support — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930. Technical data SKU: TS16-ER18NPTF-WMP32G-WALTER Article designation: TS16-ER18NPTF WMP32G Product type: Indexable turning insert Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: ER18NPTF Manufacturer: Walter Tools Core data Size/code: TS16 Chipbreaker code: ER18NPTF Material group code: M ISO designation: TS16-ER18NPTF WMP32G SKU code: TS16-ER18NPTF-WMP32G-WALTER Special features Coating technology: Tiger·tec Gold Carbide type: coated cemented carbide Application: stainless steel (ISO group M) Intended use: medium to robust turning conditions Benefit: optimised chip control and edge stability FAQ What material range is this insert suitable for? The TS16-ER18NPTF WMP32G is specified for ISO group M and is therefore suitable for machining stainless steel, offering stable performance in alloys prone to heat-induced adhesion. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating increases thermal resistance and wear protection on the cutting edge, which enhances tool life and maintains surface quality during prolonged turning cycles. Which chipbreaker is integrated and what is its effect? The ER18NPTF chipbreaker promotes short, controlled chips in sticky materials, improving swarf evacuation and reducing the incidence of surface defects caused by uncontrolled chips. Is this insert intended for finishing or roughing? The geometry and grade are optimised for medium to robust operations; it performs well in both profiles but is particularly advantageous where consistent chip control and edge stability are required under heavier cutting conditions. Can this insert be used for high-speed turning? The TS16-ER18NPTF WMP32G is designed for process security in demanding stainless steel applications; selection for high-speed turning should take into account machine rigidity, clamping and cooling strategy to ensure stable performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer. The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group.
TS16-ER18UN WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for secure chip formation and long tool life when machining stainless steel; order directly via Metav Werkzeuge or consult the team for application-specific advice. TS16-ER18UN WMP32G indexable turning insert (for stainless steel) by Walter Tools — Tiger·tec Gold TS16-ER18UN WMP32G is a coated carbide indexable turning insert engineered for robust and reliable machining of stainless steel under medium to heavy cutting conditions. Tiger·tec Gold coating for extended tool life WMP32G grade optimised for stainless steel Secure chip control under medium to heavy cuts Consistent edge stability and repeatability Reliable performance when machining stainless steel The combination of the Tiger·tec Gold coating and the WMP32G carbide grade provides a stable cutting edge under the demands of stainless steel turning. Designed for ISO group M materials, this insert supports secure chip formation and reduces the risk of built-up edge — common issues when machining tough, ductile alloys. The result is a predictable process with fewer interruptions, which helps maintain throughput and reduces the need for rework. The coated cemented carbide construction balances wear resistance with toughness, making it suitable for medium to robust cutting conditions. Efficient chip control that boosts productivity Equipped with the ER18UN chipbreaker geometry, the insert is configured to produce controllable, short chips even in heavier cuts. This targeted chip control improves swarf evacuation and reduces interruptions at the tool–workpiece interface, enabling higher metal removal rates without sacrificing surface quality. The technical design emphasises a balance between edge strength and heat management, so machining cycles remain productive while tool life is extended. In practice, the controlled chip behaviour contributes directly to processing efficiency and overall shop-floor reliability. Consistent surface finish and easy process integration The insert delivers consistent edge stability, which translates into repeatable surface quality and dimensional reliability across batches. Its designation and geometry fit standard toolholder systems for turning operations, so incorporation into existing tool setups is straightforward and does not require extensive requalification. The predictable performance of this grade supports process standardisation in production environments, reducing variability and enabling more reliable downstream operations. For operations where traceability and repeatability matter, the graded coated insert offers measurable gains in process security. For reliable stainless steel turning with the Tiger·tec Gold grade, contact Metav Werkzeuge for ordering and tailored technical advice — eMail: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data SKU: TS16-ER18UN-WMP32G-WALTER Designation: TS16-ER18UN WMP32G Type: Indexable turning insert Grade: WMP32G Series: Tiger·tec Gold Manufacturer: Walter Tools Core technical data ISO group: M Suitable material: Stainless steel Chipbreaker: ER18UN Material grade: Coated cemented carbide Special features Coating technology: Tiger·tec Gold Application range: Medium to robust cutting conditions Key benefits: Secure chip formation, stable cutting edge Typical use: Turning of stainless steels according to ISO 513 FAQ What materials is this insert designed for? The TS16-ER18UN WMP32G insert is designed primarily for stainless steel (ISO group M), offering secure chip formation and stable cutting edges for ductile, heat-generating alloys. How does the Tiger·tec Gold coating help in production? The Tiger·tec Gold coating improves wear resistance and thermal stability, which enhances the service life of the WMP32G grade and supports consistent performance during extended turning operations. What role does the ER18UN chipbreaker play? The ER18UN chipbreaker is engineered to produce compact, controllable chips in medium to heavy cuts, aiding swarf control and reducing interruptions at the tool–workpiece interface. Is the insert suitable for heavy-duty turning applications? Yes. The combination of the WMP32G grade and chipbreaker geometry makes this insert suitable for medium to robust cutting conditions commonly encountered when machining stainless steels. Which brand manufactures this insert and what is the product type? This is an indexable turning insert from Walter Tools, listed under the designation TS16-ER18UN WMP32G. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-ER18UN-F5 WMP32G Wendeplatten - Walter Tools
Combine the high wear resistance of the Tiger‑tec Gold grade with the ER18UN‑F5 chipbreaker for predictable chip formation and stable cutting behaviour — order the insert directly via Metav Werkzeuge or consult our technical team for tailored recommendations. TS16-ER18UN-F5 WMP32G – Turning indexable insert (Tiger‑tec Gold) for rostfreier Stahl by Walter Tools The TS16-ER18UN-F5 WMP32G is a coated turning indexable insert engineered for reliable machining of rostfreier Stahl under medium to robust cutting conditions Coated Tiger‑tec Gold grade WMP32G Optimised for rostfreier Stahl machining ER18UN‑F5 chipbreaker for stable chips Reliable edge life and process security Reliable performance when machining rostfreier Stahl The insert is built on the Tiger‑tec Gold platform and uses the WMP32G grade, a coated carbide formulation optimised for the challenges of rostfreier Stahl (ISO group M). These materials tend to be tough, prone to work hardening and generate significant heat at the cutting zone; the selected grade supports controlled chip formation and reduces the tendency to build up material on the cutting edge. In practice this means longer tool engagement between changes and fewer interruptions to production, enhancing throughput and repeatability. Predictable chip control that protects throughput The ER18UN‑F5 chipbreaker is designed to shape chips reliably when turning rostfreier Stahl. Controlled chip geometry prevents long, tangled swarf and facilitates safe evacuation from the tool zone, reducing the risk of surface damage and machine stoppages. For operations that combine roughing and semi‑finishing, stable chip control contributes directly to consistent surface quality and fewer unplanned tool changes, improving the overall process efficiency on production lines. Industrial benefits: process security and edge stability Selecting this grade and geometry supports measurable gains in process reliability: the coated substrate offers abrasion resistance while the coating minimises built‑up edge and thermal loading. The result is improved edge life and repeatable cutting behaviour, which is especially valuable in batch production or lights‑out machining where tool consistency is critical. Walter Tools’ engineering focus on stable cutting edges ensures reproducible results across comparable setups and workpiece batches. Practical guidance and further support for integration As an indexable insert the TS16‑ER18UN‑F5 WMP32G is compatible with standard turning holders that accept the corresponding insert shape and clamping style; correct clamping and seat condition are essential for optimum performance. Where specific cutting data, holder recommendations or dimensional checks are required, Metav Werkzeuge provides technical support to match the right insert to the machine and application. For supplementary technical data or to discuss parameter windows for rostfreier Stahl machining, consult the Metav Werkzeuge team at info@metav-werkzeuge.com or call +49 2822 7131930 for practical advice. Contact Metav Werkzeuge for tailored advice on Walter Tools Tiger‑tec Gold inserts and secure the right WMP32G grade for rostfreier Stahl applications Technical data SKU: TS16-ER18UN-F5-WMP32G-WALTER Name: TS16-ER18UN-F5 WMP32G Product type: Turning indexable insert Brand: Walter Tools Facts Grade: WMP32G Series: Tiger‑tec Gold Material group: M (rostfreier Stahl) Chipbreaker: ER18UN‑F5 Special features Coated carbide Suitable for rostfreier Stahl Stable chip control Medium to robust cutting conditions Original Walter Tools grade FAQ Which materials is this insert suited for? The WMP32G grade is formulated for rostfreier Stahl (ISO group M), providing stable cutting behaviour when machining stainless‑type alloys. What benefit does the ER18UN‑F5 chipbreaker provide? The ER18UN‑F5 chipbreaker controls chip shape to avoid long, entangling swarf, supporting consistent surface finish and safer chip evacuation during turning. Is the insert coated and how does the coating help? Yes — the TS16‑ER18UN‑F5 WMP32G uses a coated carbide grade from the Tiger‑tec Gold family; the coating reduces adhesion and thermal wear, extending edge life in demanding rostfreier Stahl conditions. For which turning operations is this insert recommended? The geometry and grade are suitable for medium to robust roughing and semi‑finishing turns on rostfreier Stahl where stable chip control and process security are required. Is this an original Walter Tools product and how is it identified? This is an original Walter Tools turning indexable insert, identifiable by the SKU TS16-ER18UN-F5-WMP32G-WALTER and the WMP32G grade designation. The Walter AG (brand appearance: Walter Tools) is recognised as a leading manufacturer of precision metalworking tools and forms part of the Sandvik group. Protected trademarks and brand names are used here only for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TS16-ER18UNJ WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP22G grade for reliable machining of stainless steels, resulting in stable chip control and extended edge life; order via Metav Werkzeuge or consult our specialists for application advice. TS16-ER18UNJ WMP22G indexable turning insert for stainless steels — Walter Tools TS16-ER18UNJ WMP22G is an indexable turning insert designed for machining stainless steels under medium to robust cutting conditions High-performance Tiger·tec Gold coating Optimised for stainless steels (M) Coated carbide grade WMP22G Stable chip formation under medium to robust cuts Consistent performance for stainless-steel turning The combination of the Tiger·tec Gold coating with the WMP22G grade delivers a reliable balance between hardness and toughness, engineered specifically for stainless steels. This coating technology reduces flank wear and improves thermal resistance, which translates into longer tool life and fewer interruptive tool changes. For production environments where predictable performance is essential, the insert supports continuous machining with stable cutting edges and reduced risk of built-up edge. Better chip control and process stability Equipped with the ER18UNJ chipbreaker, the insert promotes stable chip formation, even when cutting materials prone to stringing and heavy work-hardening. The carefully designed chip control reduces clogging in the cutting zone and lowers the likelihood of surface damage, which improves process reliability and reduces rework rates. These characteristics make the component suitable for applications where consistent surface quality and continuous throughput are required. Efficient integration into turning operations As an indexable turning insert, this component is straightforward to fit into typical toolholders that accommodate the TS16 designation, allowing rapid index changes and minimal downtime. The coated carbide construction ensures compatibility with standard coolant strategies and common lathe setups. By simplifying tool handling and maintenance, the insert contributes to smoother workflow integration and helps maintain high machine utilisation. Durable in medium to robust cutting conditions Designed for medium to robust conditions on stainless steels, the insert maintains a stable cutting edge under higher temperatures and challenging chip-forming behaviour. The coated carbide substrate supports repeatable performance across batches, helping to sustain component tolerances and surface finish requirements. This durability supports longer intervals between tool rotations and replacements, contributing to overall production economy. For reliable stainless-steel turning with Tiger·tec Gold performance, contact Metav Werkzeuge for tailored application advice and ordering: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS16-ER18UNJ-WMP22G-WALTER SKU: TS16-ER18UNJ-WMP22G-WALTER Label: Drehwendeschneidplatte TS16-ER18UNJ WMP22G Walter Tools Series: Tiger-tec Gold Grade: WMP22G Facts Application group: M (stainless steels) Chipbreaker: ER18UNJ ISO designation: TS16-ER18UNJ WMP22G Special features Coating: Tiger·tec Gold Material: coated carbide Suitable for medium to robust cutting conditions Promotes stable chip formation Manufacturer: Walter Tools FAQ Which materials can be machined with this insert? The TS16-ER18UNJ WMP22G insert is intended primarily for stainless steels (ISO group M) and performs well under the medium to robust conditions typical for these alloys. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating enhances heat resistance and wear protection on the WMP22G grade, which extends tool life and improves process reliability during stainless-steel turning. How does the ER18UNJ chipbreaker influence machining? The ER18UNJ chipbreaker shapes chips into controllable forms, reducing the risk of stringing and accumulation and promoting consistent surface quality in turning operations. Is this an indexable solution for standard toolholders? The TS16 designation indicates an indexable turning insert format compatible with toolholders designed for TS16 inserts, facilitating quick indexing and reduced machine downtime. For which cutting conditions is the insert optimised? The insert is optimised for medium to robust cutting conditions on stainless steels, offering a compromise between toughness and wear resistance for stable edge life. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names remain the property of their respective owners and are used here for explanation only. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
TS16-ER18UNJ WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP32G grade and the ER18UNJ chipbreaker for reliable stainless steel machining; these features deliver stable chip control and extended tool life. Order the insert directly via Metav Werkzeuge or contact our consultants for application guidance. TS16-ER18UNJ TS16-ER18UNJ WMP32G Drehwendeschneidplatte — Tiger·tec Gold for stainless steel, Walter Tools TS16-ER18UNJ WMP32G offers a robust, coated carbide geometry designed for medium to demanding machining of rostfreier Stahl Tiger·tec Gold coating for extended life and stability ER18UNJ chipbreaker for optimised chip control WMP32G grade tailored for stainless steel (M) Stable cutting edge for repeatable performance Enhanced productivity through optimised tool geometry The insert combines a coated carbide grade with a specifically designed chipbreaker to reduce interruptions and maintain a continuous process flow. The Tiger·tec Gold technology provides a thin, hard coating that lowers flank wear and helps resist built-up edge on tougher alloys; as a result, cycle times are less likely to be affected by early tool changes. For manufacturers facing frequent machining of stainless steel, the geometry promotes stable cutting forces and predictable tool life, which directly supports higher first-pass yields and fewer unscheduled interventions. Consistent results on rostfreier Stahl with predictable chip control Classified for material group M under ISO guidelines, the insert's WMP32G grade is engineered for the specific challenges of stainless steels — toughness, tendency to adhere and elevated heat generation. The ER18UNJ chipbreaker encourages short, consistent chips and improves evacuation in shoulder and turning operations, reducing the risk of surface damage and machine downtime. Operators benefit from clearer process windows: feeds and speeds can be set with confidence, and surface quality remains consistent throughout batch production. Practical benefits for workshop integration and handling This turning insert is suitable for standard toolholders that accept the TS16 geometry and can be adopted without complex retooling. The coated grade supports higher productive cutting parameters compared with uncoated alternatives, making it a pragmatic choice where uptime and repeatability matter. Maintenance routines are simplified by the coating’s resistance to edge chipping, which reduces frequency of insert checks and replacements. For procurement, the product aligns with industrial demands for reproducible performance and economical metal removal rates. For application-specific advice or to secure TS16-ER18UNJ WMP32G inserts from Walter Tools, contact Metav Werkzeuge — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — consultants can advise on cutting data and holder compatibility Technical Data Article number: TS16-ER18UNJ-WMP32G-WALTER Designation: TS16-ER18UNJ WMP32G Product type: Turning indexable insert Facts Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER18UNJ Material group: M (rostfreie Stähle) Special features Coated carbide grade Optimised chip control for stainless steel Stable cutting edge for medium to robust conditions Suitable for standard TS16 toolholders FAQ What materials is this insert intended for? The TS16-ER18UNJ WMP32G insert is formulated for machining rostfreier Stahl (stainless steel), indicated by the M material group and the WMP32G grade. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WMP32G grade reduces wear and improves edge stability on tough materials, resulting in longer useful life and more predictable results when machining stainless steel with Walter Tools inserts. Which chipbreaker should be chosen for heavy stainless steel turning? The ER18UNJ chipbreaker integrated with this insert is optimised for consistent chip formation in medium to robust turning operations on rostfreier Stahl, promoting reliable evacuation and surface integrity. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-ER18W WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold grade performance, a defined ER18W chipbreaker and proven suitability for stainless steels to increase turning productivity and process stability. Order the indexable turning insert directly via Metav Werkzeuge or consult the specialists for application-specific recommendations. TS16-ER18W WMP32G indexable turning insert — Tiger‑tec Gold, for stainless steel (Walter Tools) TS16-ER18W WMP32G is an indexable turning insert designed for medium to robust machining of stainless steels in general turning applications High-performance Tiger‑tec Gold grade Chipbreaker ER18W for stable chip control Coated carbide for improved edge life Optimised for rostfreiem Stahl machining Increased productivity from a robust grade The combination of the WMP32G grade and the Tiger‑tec Gold technology supports stable cutting edges under demanding conditions. The coated carbide composition is engineered to resist premature wear and to maintain edge integrity when machining tough, temperature‑sensitive alloys. As a result, cycle times can be reduced through longer tool life and fewer tool changes, which leads to measurable productivity gains on production lines where consistent performance matters. Predictable chip control and process security The ER18W chipbreaker geometry is developed for reliable chip formation when turning stainless steel, a material group prone to stringing and built‑up edge. By promoting short, controllable chips and a steady metal removal pattern, the insert reduces the risk of interrupted cuts and improves surface finish consistency. This predictable behaviour supports higher first‑pass yields and eases downstream handling of swarf. Practical benefits for workshop routines Thanks to the insert’s indexable design and coated substrate, maintenance routines become more economical: fewer tool changes and extended intervals between regrinds or replacements. The grade’s tolerance to the heat and strain typical for rostfreiem Stahl machining allows setups to run with confidence, and the geometry minimises secondary operations for finish passes. Documentation and tool selection become simpler when an insert is clearly matched to the material group and the intended cutting strategy. Materials and application guidance The insert is specified for machining the material group denoted as M, i.e. stainless steels according to ISO classifications. It is suitable for medium to robust cutting conditions where stable chip control and resistance to adhesion are required. Selection of feeds and speeds should follow machine capability and workpiece specifications; the insert is intended to provide a balance between tool life and surface quality in demanding turning tasks. Contact Metav Werkzeuge for tailored cutting data and fast supply of Walter Tools inserts; Metav Werkzeuge can advise on the right insert geometry and grade for specific rostfreiem Stahl applications — info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: TS16-ER18W-WMP32G-WALTER Product type: indexable turning insert Grade: WMP32G Chipbreaker: ER18W Series: Tiger‑tec Gold Facts Material group: M (stainless steel) Coating: Tiger‑tec Gold coated carbide Geometry family: TS16 series Intended use: medium to robust turning conditions Special features Coated carbide for improved wear resistance Designed for stable chip formation in stainless steel Supports long edge life and process reliability Manufacturer: Walter Tools — professional tooling for turning FAQ What materials is this insert suitable for? The TS16-ER18W WMP32G insert is specified for the ISO material group M; it is intended for machining stainless steels and performs well under the thermal and mechanical demands associated with those alloys. What is the benefit of the Tiger‑tec Gold grade? Tiger‑tec Gold enhances wear resistance and thermal stability on the insert, helping the WMP32G grade maintain a stable cutting edge during medium to robust turning operations in rostfreiem Stahl. How does the ER18W chipbreaker affect machining? The ER18W chipbreaker promotes short, controlled chips and reduces the tendency for stringing and built‑up edge, resulting in safer swarf management and more consistent surface finishes. Is this insert suitable for finishing passes? The insert is optimised for a balance between productivity and finish quality; depending on the final tolerance requirements, it can be used for semi‑finish and certain finishing tasks with appropriately adjusted cutting parameters. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany. Protected trademarks and trade names are the property of their respective owners. Walter Tools is mentioned for clarification of the product origin and does not imply any commercial relationship. The offered item is an original, brand‑new product from the manufacturer.
TS16-ER19BSPT WMP32G WMP32G Wendeplatten - Walter Tools
Thanks to its combination of Tiger·tec Gold coating and a grade tuned for stainless steels, this insert delivers stable chip control and consistent edge life under medium to robust cutting conditions. Invest in the WMP32G grade for reduced rework and steady production output, and order directly via Metav Werkzeuge or consult their specialists for application advice. TS16-ER19BSPT WMP32G indexable turning insert — Walter Tools — Tiger·tec Gold, for stainless steels A high-performance indexable turning insert, the TS16-ER19BSPT WMP32G is designed for secure chip formation and reliable cutting-edge stability when machining stainless steels under medium to robust conditions Tiger·tec Gold coating for longer tool life Optimised for stainless steels (M) Stable chip formation under robust cuts Precision indexable insert by Walter Tools Higher process stability through optimised coating and grade The combination of the Tiger·tec Gold coating and the WMP32G cutting grade provides predictable wear behaviour and improved edge security when turning stainless steels. Coated hardmetal reduces adhesive wear and helps avoid built-up edge, which in turn lowers the frequency of tool changes and unplanned rework. For operations where consistent part surface and dimensional accuracy are required, this insert supports a steady production flow and contributes to lower overall machining costs. Clear advantages in chip control and cutting performance The ER19BSPT geometry promotes stable chip formation, even in materials prone to toughness and heat generation. By guiding chips effectively away from the cutting zone, the insert reduces vibration and improves surface finish quality. In practice, this means fewer interruptions for chip management and more reliable cycle times; machinists and process planners benefit from predictable behaviour at both moderate and more demanding cutting parameters. Practical application guidance and compatibility This grade is classified for the ISO group M, indicating suitability for a wide range of stainless steel machining tasks, from general turning to heavier finishing passes. The insert is coated carbide, making it appropriate for operations that require a balance between toughness and wear resistance. When selecting cutting parameters, favour conservative feeds and appropriate cutting speeds for the specific stainless alloy to exploit the grade’s advantages in edge security and to avoid thermal softening. For dependable stainless-steel turning with Walter Tools’ Tiger·tec Gold grade, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss stock and suitability for the intended application Technical data SKU: TS16-ER19BSPT-WMP32G-WALTER Designation: TS16-ER19BSPT WMP32G Type: Indexable turning insert (Drehwendeschneidplatte) Brand: Walter Tools Core data Grade: WMP32G Coating technology: Tiger·tec Gold Material group: M (stainless steels) Cutting geometry: ER19BSPT Special features Coated carbide Stable chip formation Suitable for medium to robust machining conditions Classified for stainless-steel machining per ISO 513 FAQ What materials is this insert designed to machine? The TS16-ER19BSPT WMP32G is intended for stainless steels (ISO group M) and performs well under medium to robust cutting conditions typical for these alloys. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WMP32G grade enhances wear resistance and edge stability, resulting in longer tool life and improved process reliability during stainless-steel turning. Which cutting characteristics can be expected from the ER19BSPT geometry? ER19BSPT promotes effective chip breaking and evacuation, leading to stable chip formation, reduced vibration and a consistent surface finish in demanding stainless-steel applications. Is this insert suitable for finishing and semi-finishing passes? Yes—the combination of coated carbide and the WMP32G grade provides enough toughness for semi-finishing and the edge integrity needed for reliable finishing of stainless-steel components. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany. The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. The named brands are used solely for explanatory purposes; there is no affiliation between our company and the listed manufacturers.
TS16-ER19W WMP22G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, the WMP22G coated carbide grade and secure chip control for productive machining of stainless steels; order directly via Metav Werkzeuge or consult our technical advisers for application-specific support. TS16-ER19W WMP22G Turning indexable insert – Tiger‑tec Gold for stainless steel, Walter Tools The TS16-ER19W WMP22G is a coated carbide turning insert engineered for reliable performance when machining stainless steel in medium to robust cutting conditions. Tiger‑tec Gold coating for edge stability Optimised for stainless steel machining Coated carbide grade WMP22G for durability Stable chip control under robust cuts Consistent results when turning stainless steels The insert is designed to deliver repeatable performance in demanding turning operations with rostfreier Stahl. The combination of a wear-resistant coating and a carbide substrate yields a predictable flank and crater wear behaviour, which reduces the frequency of tooling changes and supports uninterrupted production runs. By favouring controlled cutting temperatures and a reliable cutting edge, this solution helps maintain workpiece tolerances and surface quality across successive batches. Improved chip formation and process security The integrated chipbreaker (ER19W) and the WMP22G grade focus on secure chip control and stable machining under elevated heat and adhesion tendencies typical for stainless steels. This results in consistent swarf evacuation and minimised risk of built-up edge formation. For shop floors aiming to increase cycle stability, the enhanced chip management reduces interruptions and contributes to a smoother tool life profile. Coating and grade explained for practical benefit The insert uses the Tiger‑tec Gold coating technology applied to a coated carbide substrate. This combination offers improved resistance to abrasive and adhesive wear while keeping the cutting edge robust under intermittent and continuous cuts. In practice, this means longer intervals between indexings and fewer unscheduled interventions, supporting higher overall equipment effectiveness and lower tooling costs per part. Integration into production: handling and selection tips When selecting this insert for turning operations, consider the grade WMP22G for its suitability in medium to heavy conditions on stainless steel. The geometry TS16‑ER19W provides a balance between strength and accessibility in common toolholders. For best outcomes, match cutting parameters to machine rigidity and workpiece clamping, and favour cooling or lubricant strategies that control temperature at the cutting zone to further extend edge life. Discuss machining parameters and batch recommendations with Metav Werkzeuge to ensure optimal use of Walter Tools Tiger‑tec Gold inserts; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS16-ER19W-WMP22G-WALTER Designation: TS16-ER19W WMP22G Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Grade: WMP22G Chipbreaker: ER19W Material group: M (rostfreie Stähle) Product type: Turning indexable insert Special features Coating: Tiger‑tec Gold Substrate: coated cemented carbide Application: machining stainless steel Typical use: medium to robust cutting conditions FAQ What materials is this insert suited for? This insert is optimised for stainless steel (material group M); the WMP22G grade supports secure chip formation and edge stability in such applications. Which chipbreaker does the insert feature and why is it important? The insert is equipped with the ER19W chipbreaker, which improves chip control during turning operations and helps avoid entanglement or re-cutting of swarf. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating increases resistance to adhesive and abrasive wear, stabilising the cutting edge and extending service intervals for higher productivity. Is this insert suitable for heavy interrupted cuts? The combination of WMP22G grade and the TS16‑ER19W geometry provides robustness for medium to robust cuts; assess holder rigidity and process parameters before heavy interrupted operations. Can the insert reduce downtime in series production? Yes, the wear characteristics and chip control offered by WMP22G and the Tiger‑tec Gold technology help reduce the need for frequent tool changes and unscheduled stops. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-ER19W WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP32G grade tailored for stainless steels, and the ER19W chipbreaker to secure consistent edge life and reliable chip control; order the TS16-ER19W WMP32G insert directly via Metav Werkzeuge or consult the advisers for application details. TS16-ER19W TS16-ER19W WMP32G (WMP32G) — Indexable Turning Insert for Stainless Steels | Walter Tools TS16-ER19W WMP32G is an indexable turning insert engineered for robust machining of stainless steels under medium to heavy conditions, benefiting from the Tiger·tec Gold coating and a dedicated ER19W chipbreaker. Tiger·tec Gold coating for extended tool life WMP32G grade optimised for stainless steels ER19W chipbreaker for stable chip formation Coated carbide for robust machining performance Reliable performance for stainless-steel turning The TS16-ER19W WMP32G insert combines a coated carbide substrate with the Tiger·tec Gold coating, delivering enhanced wear resistance and temperature management during machining of stainless steels. The WMP32G grade is specified for materials in ISO 513 group M, which are prone to work-hardening and elevated cutting temperatures; the coating technology reduces flank wear and supports predictable tool life. As a result, production runs achieve fewer interruptions for tool changes and more consistent component tolerances, translating directly into improved throughput. Consistent edge life and higher productivity A hard-wearing coating and optimised grade mean extended tool life and less frequent insert replacement. The insert’s substrate and surface treatment minimise abrasive and adhesive wear mechanisms common with austenitic and duplex stainless steels, allowing higher cutting parameters where appropriate. That efficiency supports shorter cycle times and lower tooling consumption per part, improving machining economy while preserving surface integrity on finished components. Secure chip control and process stability The integrated ER19W chipbreaker shapes chips reliably even under varying cut depths and feeds, which reduces the risk of entanglement and tool damage. Stable chip formation helps maintain a constant heat distribution at the cutting edge, supporting process security and reproducible surface finishes. For shops seeking predictable behaviour in mixed-batch production, this insert reduces the need for constant parameter adjustments and simplifies tool management in the machining cell. Practical selection and application guidance This indexable insert is intended primarily for stainless-steel applications per ISO 513 (material group M) and performs well in medium to robust cutting conditions. When replacing legacy grades, consider the insert’s coating benefits and choose cutting speeds and feeds that account for the higher thermal loads of stainless steels. For best results, pair the insert with appropriate toolholders and coolant strategies to balance thermal control and chip evacuation for consistent component quality. For robust stainless-steel machining with Tiger·tec Gold reliability, contact Metav Werkzeuge for supply and application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: TS16-ER19W-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-ER19W WMP32G Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Grade: WMP32G Facts Material code: M ISO 513: group M (stainless steels) Special features Series: Tiger·tec Gold Chipbreaker: ER19W Base designation: TS16-ER19W Suitable for: stainless steels Coating: Tiger·tec Gold FAQ What materials is this insert suitable for? The TS16-ER19W WMP32G insert is designed for machining stainless steels (ISO 513 group M) and performs well under medium to robust cutting conditions. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WMP32G grade reduces wear and improves heat resistance, which extends tool life and helps maintain consistent surface quality when turning stainless steels. What is the role of the ER19W chipbreaker? The ER19W chipbreaker promotes controlled chip formation, reducing the risk of entanglement and supporting stable cutting conditions for safer, more reliable machining cycles. Can this insert be used for finishing operations? Yes, with appropriate cutting parameters and stable toolholding, the insert can deliver consistent surface finishes; the choice of feed and speed should reflect the workpiece material and desired finish. Is the TS16-ER19W WMP32G compatible with standard indexable toolholders? The insert’s base designation TS16-ER19W aligns with conventional holders for that geometry; confirm holder compatibility and clamping specifications before assembly. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; info@walter-tools.com Protected trademarks and trade names belong to their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original factory-new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com