TS16-ER19W-F5 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold technology, the WMP32G grade and the ER19W-F5 chipbreaker to achieve reliable, repeatable turning of stainless steels with stable edge life; order through Metav Werkzeuge or consult our specialists for application-matched recommendations. TS16-ER19W-F5 WMP32G – indexable turning insert, Tiger·tec Gold, Walter Tools The TS16-ER19W-F5 WMP32G is an indexable turning insert engineered for dependable machining of stainless steels under medium to robust cutting conditions Tiger·tec Gold coating for wear resistance Optimised for stainless steels (M) ER19W-F5 chipbreaker for controlled chips Stable cutting-edge performance for series production Longer tool life and reliable edge stability for stainless steels The combination of the WMP32G grade and Tiger·tec Gold coating provides a hardened, wear-resistant surface that supports secure chip formation when machining stainless steels. Coated cemented carbide resists the adhesive wear and work-hardening tendencies common with these materials, so the insert maintains a stable cutting edge over extended cycles. The result is fewer indexings, reduced tool-change frequency and a more predictable production flow for batch and continuous turning operations. Consistent surface quality and improved process security The ER19W-F5 chipbreaker geometry is tuned for controlled chip evacuation and reliable contact with the workpiece, which helps reduce built-up edge and improves finish consistency. By using a grade designed specifically for stainless applications, the insert reduces the risk of chatter and unexpected tool degradation; this enhances process security and supports repeatable part tolerances. For pragmatic workshops, that means less rework, a steadier output quality and better utilisation of machine time. Practical integration and selection guidance for workshop use The insert conforms to the ISO designation TS16-ER19W-F5 WMP32G and is compatible with standard indexable toolholders that accept this geometry. Its specification is suitable for medium to robust cutting strategies where reliable chip control and edge retention are priorities. For users planning tool inventories, pairing these inserts with appropriate holders and cutting parameters yields cost-effective performance. Technical consultation is available for matching insert grade, cutter body and machining strategy to specific stainless-steel alloys. Contact Metav Werkzeuge for tailored recommendations on the Walter Tools TS16-ER19W-F5 WMP32G — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com — expert advice and application data are available to support the correct selection and set-up Technical Data Article number: TS16-ER19W-F5-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-ER19W-F5 WMP32G Walter Tools Type: Indexable turning insert Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER19W-F5 ISO designation: TS16-ER19W-F5 WMP32G Material group: M Facts SKU: TS16-ER19W-F5-WMP32G-WALTER Material code: M Applicable material group: rostfreie Stähle Special features Coated cemented carbide grade (described as coated carbide) Optimised for stainless steels with medium to robust cutting conditions ER19W-F5 geometry for enhanced chip control Walter Tools grade designed for stable edge life FAQ What materials is this insert intended for? The TS16-ER19W-F5 WMP32G is intended primarily for stainless steels (material group M) and is formulated to manage the toughness and heat characteristics of these alloys. How does the Tiger·tec Gold technology benefit production? Tiger·tec Gold coating on the WMP32G grade enhances wear resistance and edge durability on the TS16-ER19W-F5, leading to more consistent performance and longer intervals between indexings. Which chipbreaker is integrated and what does it do? The ER19W-F5 chipbreaker is specified for controlled chip formation and evacuation; on the TS16-ER19W-F5 WMP32G it supports stable cutting and improved surface consistency. Is this insert compatible with standard ISO holders? Yes, the ISO designation TS16-ER19W-F5 WMP32G aligns with holders designed for that geometry; compatibility should be confirmed against the machine and holder catalogue. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-ER2.0ISO WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WMP22G grade for reliable machining of stainless steel; the result is stable chip formation and predictable tool life. Order the TS16-ER2.0ISO WMP22G turning insert through Metav Werkzeuge or consult our specialists for application advice. TS16-ER2.0ISO WMP22G indexable turning insert, Tiger‑tec Gold, for stainless steel — Walter Tools The TS16-ER2.0ISO WMP22G is an indexable turning insert designed to deliver consistent chip control and robust cutting-edge stability when machining stainless steel under medium to demanding conditions. Tiger‑tec Gold coating for extended tool life Optimised for stainless steel machining ER2.0ISO chipbreaker for reliable chip control Walter Tools grade WMP22G for stable edge retention Consistent cutting performance for demanding stainless applications The combination of Tiger‑tec Gold coating and the WMP22G grade provides a balance between wear resistance and toughness that is particularly suited to stainless steel. The coated carbide microstructure reduces adhesion and helps prevent built-up edge, which in turn maintains a consistent cutting edge and dimensional stability over longer tool life. For production environments where reproducible results matter, this insert supports steady metal removal rates while reducing the need for frequent index changes, contributing to fewer process interruptions and predictable cycle times. Increased process reliability and measurable productivity benefits Built around the ER2.0ISO chipbreaker, the insert delivers controlled chip formation that reduces the risk of entanglement and improves surface finish in turning operations. Stable chip evacuation lowers thermal load on the cutting zone, which supports improved tool life and fewer rejects. In practice, users can expect more consistent parts per shift and less unplanned downtime—practical advantages that translate directly into better throughput and lower unit production costs. The insert’s design therefore targets operational efficiency and repeatable performance in workshop and production settings. Clear application guidance and straightforward technical advantages The insert is classified for ISO group M and is intended primarily for stainless steels; this means it is engineered to manage affinity and heat-generation typical of these materials. As a coated carbide grade, it combines a wear-resistant layer with a tough substrate to resist chipping under moderate to robust cutting conditions. The chipbreaker geometry is optimised to form short, controllable chips at recommended feeds and depths, making setup simpler for machinists and reducing secondary handling. For less experienced staff, the key takeaways are: select cutting speeds and feeds matching stainless steel recommendations, ensure adequate coolant or flow, and monitor edge condition to time index changes for consistent quality. For reliable, repeatable machining of stainless steel, choose the Walter Tools TS16-ER2.0ISO WMP22G insert and contact Metav Werkzeuge for tailored advice and fast availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TS16-ER2.0ISO-WMP22G-WALTER Product: Drehwendeschneidplatte TS16-ER2.0ISO WMP22G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WMP22G Numbers / Core technical data Material group: M (stainless steels) Chipbreaker: ER2.0ISO Coating technology: Tiger‑tec Gold Designs / Special features Coated carbide grade WMP22G Suitability: stainless steel machining Stable chip formation and improved tool life Optimised for medium to robust cutting conditions FAQ What materials is this insert designed for? The TS16-ER2.0ISO WMP22G insert is designed for stainless steels and is classified in ISO group M for stainless applications. How does the Tiger‑tec Gold coating improve performance? Tiger‑tec Gold reduces adhesion and wear on the cutting edge of the WMP22G grade, which helps maintain dimensional stability and extend the effective tool life during continuous turning operations. What is the purpose of the ER2.0ISO chipbreaker? The ER2.0ISO chipbreaker controls chip form and evacuation, producing short, manageable chips that reduce the risk of entanglement and support consistent surface finish. Is this insert suitable for high-feed or heavy roughing operations? The insert is optimised for medium to robust conditions; selection of feeds and depths should align with stainless steel recommendations and machine capacity to ensure stable cutting-edge performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-ER2.0ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for reliable machining of stainless steel, ensuring stable chip formation and longer tool life; order directly via Metav Werkzeuge or consult our application specialists for tailored machining parameters. TS16-ER2.0ISO WMP32G indexable turning insert for stainless steel — Walter Tools The TS16-ER2.0ISO WMP32G is an indexable turning insert designed for demanding applications in stainless steel, combining a Tiger·tec Gold coating and an ER2.0ISO chipbreaker for secure chip control and consistent surface quality. Tiger·tec Gold coating for extended tool life ER2.0ISO chipbreaker for controlled chips WMP32G grade optimised for stainless steel Coated carbide for consistent surface finish Boosted productivity through predictable chip control The combination of the ER2.0ISO chipbreaker and the Tiger·tec Gold surface treatment delivers predictable chip control during continuous turning operations in stainless steel. The geometry reduces tendencies for built-up edge and supports steady material removal rates; this leads to fewer interruptions for chip clearing and a higher effective machining throughput. The insert’s construction from coated carbide ensures the cutting edge maintains its integrity under the thermal and mechanical stresses typical for stainless steel turning, translating into fewer index changes and improved cycle times. Longer tool life with modern coating technology The Tiger·tec Gold technology enhances the wear resistance of the substrate and stabilises the cutting edge for extended service life. This coating minimises flank wear and increases resistance to abrasive and adhesive wear mechanisms that occur when machining tough, heat‑retaining alloys. For production environments where tool change time directly affects costs, the WMP32G grade gives measurable benefits: longer edge life and more consistent component quality over extended runs, reducing downtime and supporting efficient tool inventory management. Reliable surface finishes with stable cutting performance A stable cutting edge provided by the coated carbide structure and the optimised chipbreaker geometry results in consistent surface integrity and repeatable dimensional outcomes. Where component finish and tight tolerances matter, the insert’s design supports fine adjustment of feeds and depths of cut while limiting chatter and vibration. The result is a reliable method to achieve target surface roughness in routine turning operations, especially with workpieces that are prone to work hardening or strain‑hardening during machining. Practical application and process guidance for workshop use The insert is engineered for standard turning toolholders compatible with the TS16 seat form and can be integrated into existing tool setups without major changes. When replacing uncoated or older grades, the Tiger·tec Gold insert typically allows for modest increases in cutting speed and stability while maintaining or improving tool life. For best results, pair the insert with appropriate coolant strategies and validated cutting data adapted to stainless steel; this balances thermal control with chip evacuation to protect the cutting edge and the component surface. For tailored advice on integrating Tiger·tec Gold inserts into turning operations for stainless steel, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: TS16-ER2.0ISO-WMP32G-WALTER Designation: TS16-ER2.0ISO WMP32G Product type: Indexable turning insert Manufacturer: Walter Tools Facts Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER2.0ISO Material group: M (stainless steels) Special features Coated carbide construction Suitable for stainless steel machining Optimised for stable chip formation and edge life Designed for consistent surface finish and process reliability FAQ What materials is this insert suited for? The TS16-ER2.0ISO WMP32G insert is specifically developed for machining stainless steel, delivering improved chip control and tool life in this material group. How does the Tiger·tec Gold coating benefit performance? The Tiger·tec Gold coating on the WMP32G grade increases wear resistance and thermal stability, which extends service life and helps maintain a stable cutting edge during stainless steel turning. Is a special chip evacuation strategy required? While the ER2.0ISO chipbreaker is optimised for controlled chips, using suitable coolant or high‑pressure flushing where appropriate enhances chip evacuation and supports consistent performance with the insert. Can this insert be used in existing TS16 toolholders? Yes, the insert is designed for the TS16 seat form and integrates into standard turning toolholders that accept the TS16 indexable insert format. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-ER2.0ISO-2 WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and a dedicated ER2.0ISO-2 chipbreaker for consistent chip control and extended edge life in demanding stainless steel turning. Order original Walter Tools inserts directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. TS16-ER2.0ISO-2 ER2.0ISO-2 WMP32G — Indexable turning insert for stainless steel (Walter Tools) The TS16-ER2.0ISO-2 WMP32G is an indexable turning insert engineered for reliable machining of stainless steels in medium to robust cutting conditions, combining a coated carbide substrate with a chipbreaker optimised for secure chip formation. Tiger·tec Gold coating for improved tool life Optimised chip control for stainless steels Stable cutting edge under medium to robust conditions Compatible with TS16-ER2.0ISO-2 toolholders Increased process reliability through coated carbide technology The insert is built on a coated carbide substrate using the Tiger·tec Gold technology, which enhances wear resistance and thermal stability. For materials classified under ISO group M (stainless steels), the combination of coating and geometry supports reliable chip formation and reduces the risk of built-up edge. The ER2.0ISO-2 chipbreaker is designed to break and evacuate chips consistently during turning, which helps maintain steady cutting forces and reduces interruptions in automated and manual machining processes. This technical configuration typically leads to longer tool life and fewer tool changes, which supports uninterrupted production runs. Consistent surface quality and edge stability in demanding operations Under medium to robust cutting conditions the insert maintains a stable cutting edge, contributing to repeatable surface finishes and dimensional accuracy. The WMP32G grade is a Walter Tools development optimised for the typical challenges of stainless steel — toughness, tendency to work-harden, and high thermal loading. By promoting controlled chip flow and limiting edge wear, the insert helps to decrease rework and minimise scrap rates. For manufacturers seeking predictable cycle times and consistent part quality, the insert offers a sound balance between durability and performance. Practical selection and application guidance for turning processes Selection of the correct insert geometry and cutting data is crucial: the presented insert form and the ER2.0ISO-2 chipbreaking geometry suit a wide range of turning applications where stainless steels are processed. Adjustments to feed and cutting speed should reflect material hardness and component tolerance requirements; conservative initial parameters are recommended when switching to a new grade. For specific cutting speeds, feeds and depth of cut tailored to the workpiece and machine, Metav Werkzeuge can provide application data and machining strategies to get the best out of the WMP32G grade and the TS16 insert format. For application-specific recommendations and to secure original Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for expert consultation and order support at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data SKU: TS16-ER2.0ISO-2-WMP32G-WALTER Product name: TS16-ER2.0ISO-2 WMP32G Product type: Indexable turning insert Facts Applicable material group: M (stainless steel) Grade/series: WMP32G / Tiger·tec Gold Chipbreaker: ER2.0ISO-2 Special features Coating technology: Tiger·tec Gold Carbide substrate: coated hardmetal Typical application: turning of stainless steels Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The TS16-ER2.0ISO-2 WMP32G insert is designed primarily for stainless steel machining and is specified for ISO group M applications. What does the ER2.0ISO-2 chipbreaker achieve? The ER2.0ISO-2 chipbreaker promotes controlled chip formation and evacuation during turning, improving process stability and reducing the risk of built-up edge when machining stainless steels. Can this insert be used in automated production environments? Yes. The combination of the WMP32G grade and the Tiger·tec Gold coating is intended to provide consistent tool life and stable cutting behaviour that suits automated and high-repetition turning operations. How does Tiger·tec Gold benefit performance? Tiger·tec Gold offers enhanced wear resistance and thermal stability for the coated carbide, which helps to maintain the cutting edge and extend productive cutting times on tough, heat-generating materials like stainless steel. Where can cutting data and application support be obtained? Metav Werkzeuge can supply recommended cutting speeds, feeds and process advice for the TS16-ER2.0ISO-2 WMP32G insert to match specific machine and workpiece conditions. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TS16-ER2.0ISO-F5 WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WMP32G grade for reliable machining of stainless steel and improved chip control. The TS16-ER2.0ISO-F5 geometry with the ER2.0ISO-F5 chipbreaker provides a stable cutting edge under medium to robust conditions. Order the insert directly via Metav Werkzeuge or consult the advisors for application-specific recommendations. TS16-ER2.0ISO-F5 WMP32G — Indexable turning insert for stainless steel (Tiger·tec Gold) by Walter Tools TS16-ER2.0ISO-F5 WMP32G is an indexable turning insert from the Tiger·tec Gold series, designed to ensure secure chip formation and consistent cutting performance when machining stainless steel under medium to robust conditions. Tiger·tec Gold coating for extended tool life Optimised chip control for stainless steel machining Stable cutting edge for medium to heavy cuts Consistent cutting performance for stainless steel components The combination of Tiger·tec Gold technology and the WMP32G grade delivers a coated carbide solution tailored to the demands of stainless steel. The coating system promotes thermal stability and wear resistance, which reduces the tendency for edge build-up on tough, heat-prone alloys. As a result, chip formation becomes more predictable and the risk of undesirable built-up edge is lowered, enabling longer tool life and fewer component reworks. This makes the insert particularly suitable where dimensional accuracy and surface quality are essential in serial production. Increased productivity through robust geometry and chip control The insert’s designation, TS16-ER2.0ISO-F5, indicates a geometry paired with the ER2.0ISO-F5 chipbreaker that is optimised for medium to robust cutting. The chip control geometry actively fragments and evacuates chips, preventing recutting and improving process stability. For the production environment, this translates into higher productivity, reduced cycle-time variability and less unscheduled maintenance. The robust cutting edge supports repeatable performance during interrupted cuts and heavier cross-sections, offering a clear efficiency advantage in batch machining. Application guidance and integration into the process Intended primarily for stainless steel applications, the insert is best used with suitable toolholders that ensure correct seat and clamping for indexable inserts. Select cutting parameters that balance cutting speed and feed to exploit the WMP32G grade’s strengths: thermal resistance and stable edge retention. The indexable format eases handling and inventory management, since worn edges can be rotated instead of replacing an entire toolbody. The article is identified as TS16-ER2.0ISO-F5 WMP32G and is compatible with common ISO-standard toolholder systems, supporting straightforward integration into existing turning operations. Contact Metav Werkzeuge today to discuss optimal grades and application-specific tool recommendations for Tiger·tec Gold inserts, or request further technical data via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: TS16-ER2.0ISO-F5-WMP32G-WALTER Product: Drehwendeschneidplatte Designation: TS16-ER2.0ISO-F5 WMP32G Manufacturer: Walter Tools Facts Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: ER2.0ISO-F5 Material group: M (stainless steel applications) SKU: TS16-ER2.0ISO-F5-WMP32G-WALTER Special features Coated carbide construction Optimised chip control for stainless steel Stable cutting edge for medium to robust conditions Suitable for ISO-standard insert toolholders FAQ What materials is this insert intended for? The TS16-ER2.0ISO-F5 WMP32G insert is designed primarily for stainless steel machining and supports medium to robust application conditions. How does the Tiger·tec Gold technology benefit machining? Tiger·tec Gold provides enhanced thermal stability and wear resistance, enabling the WMP32G grade to maintain a stable cutting edge and improve chip control during stainless steel turning. What does ER2.0ISO-F5 indicate? ER2.0ISO-F5 refers to the chipbreaker and insert geometry; this configuration is optimised for efficient chip fragmentation and evacuation in medium to heavier cuts. Is the insert compatible with standard ISO toolholders? Yes, the TS16-ER2.0ISO-F5 WMP32G follows ISO insert designation conventions and is compatible with commonly used ISO-standard turning toolholders. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for clarification purposes only and do not imply any connection between our company and the named brands. The article offered is an original, factory-new product from the stated manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
TS16-ER2.0ISO-M5 WMP32G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Gold coating and the WMP32G grade for stable edge life and secure chip formation when machining stainless steels; the TS16-ER2.0ISO-M5 WMP32G insert delivers consistent surface finish and longer tool intervals — order directly via Metav Werkzeuge or consult their specialists for integration support. TS16-ER2.0ISO-M5 WMP32G indexable turning insert, Tiger‑tec Gold — Walter Tools The TS16-ER2.0ISO-M5 WMP32G is an indexable turning insert engineered for productive machining of stainless steels, offering robust chip control and long wear life under medium to heavy cutting conditions. Tiger‑tec Gold coating for long tool life WMP32G grade for reliable edge stability Optimised for stainless steel machining ER2.0ISO chipbreaker for predictable chips Increase productivity through optimised coating and grade The combination of the Tiger‑tec Gold coating with the WMP32G grade focuses on achieving stable chip formation and extended tool life when processing stainless steel. The coated cemented carbide formulation is designed to resist the adhesive tendencies and high temperatures typical of these materials, reducing the frequency of edge failures and unscheduled stops. For manufacturing environments where consistency of finish and predictable tool intervals matter, this insert supports higher uptime and repeatable part quality, translating directly into improved process reliability and lower overall machining cost per component. Predictable chip control that simplifies machining cycles Featuring the ER2.0ISO chipbreaker geometry, the insert creates short, controllable chips that evacuate reliably even under tougher cuttings. Predictable chip behaviour reduces the risk of surface damage and tool-clamping issues, which helps maintain a steady production flow. The specific geometry also supports consistent cutting forces and a stable cutting edge, which in turn produces an improved and repeatable surface finish. For engineers and operators seeking to reduce cycle variability, the insert’s design offers straightforward advantages: fewer interruptions for chip clearing and easier downstream handling of machined parts. Seamless fit into professional turning applications with proven brand backing Designed as an indexable solution for turning operations, the insert integrates easily into standard toolholders that accept the TS16-ER2.0ISO form and is suitable for series production as well as batch processing. The Walter Tools development combines application-focused grade selection with geometry tuned for the demands of stainless steels, delivering reliable cutting and consistent component quality. If an optimal balance between edge life and surface integrity is required, the TS16-ER2.0ISO-M5 WMP32G insert provides a pragmatic solution that supports both operational efficiency and quality assurance in industrial workshops. For machining stainless steels with high process security, choose the Walter Tools TS16-ER2.0ISO-M5 WMP32G — order through Metav Werkzeuge or contact their technical team at info@metav-werkzeuge.com or +49 2822 7131930 for application advice and prompt availability. Technical Data SKU: TS16-ER2.0ISO-M5-WMP32G-WALTER Product: Indexable turning insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WMP32G Designation: TS16-ER2.0ISO-M5 WMP32G Core technical data Application group: M (stainless steels) Chipbreaker: ER2.0ISO-M5 Material group code: M UID: TS16-ER2.0ISO-M5-WMP32G-WALTER Special features Coating technology: Tiger‑tec Gold Suitable for: rostfreier Stahl (stainless steel) Optimised for medium to robust cutting conditions Stable chip formation and edge stability FAQ What materials is this insert intended for? The TS16-ER2.0ISO-M5 WMP32G insert is intended primarily for stainless steel machining; the WMP32G grade and Tiger‑tec Gold coating are selected for this material group. How does the ER2.0ISO chipbreaker help on the shop floor? The ER2.0ISO chipbreaker produces short, predictable chips that simplify chip evacuation and reduce the chance of surface damage, supporting uninterrupted production runs. Can this insert be used for finishing operations? Yes, the combination of grade and geometry provides a reliable cutting edge suitable for consistent surface finishes in many turning applications on rostfreier Stahl. Is the TS16-ER2.0ISO-M5 WMP32G compatible with standard toolholders? The insert follows the TS16-ER2.0ISO form factor and can be mounted in toolholders designed for that ISO designation; compatibility should be confirmed against the holder specification. What performance benefits does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating enhances thermal and wear resistance, improving tool life and reducing edge deterioration during the machining of demanding stainless steels. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen. Protected trademarks and trade names are the property of their respective owners. The products listed are original, factory-new goods from the manufacturer Walter Tools; mention of brand names is for explanatory purposes only and does not imply any affiliation.
TS16-ER2.0TR WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and an optimised ER2.0TR chipbreaker for reliable, repeatable turning of rostfreiem Stahl; order through Metav Werkzeuge or consult their specialists for tool pairing and process advice. TS16-ER2.0TR WMP32G indexable turning insert, Tiger·tec Gold coating — Walter Tools TS16-ER2.0TR WMP32G is an indexable turning insert from Walter Tools engineered for medium to robust machining of rostfreiem Stahl in production environments Tiger·tec Gold coating for extended tool life ER2.0TR chipbreaker for controlled chip formation Designed for rostfreiem Stahl machining Walter Tools quality and repeatable performance Stable cutting in rostfreiem Stahl for predictable production The combination of the WMP32G grade and Tiger·tec Gold coating creates a reliable cutting behaviour when working with rostfreiem Stahl, a group of materials prone to toughness, built-up edge and elevated temperatures. The insert’s coated carbide substrate supports consistent cutting-edge stability and lowers the tendency for adhesive wear, which translates into fewer in-process interruptions and more predictable tool-change intervals. For shops that measure productivity in uptime and reproducible part quality, this results in less scrap and more consistent cycle times. Controlled chips and improved surface finish for fewer stoppages The ER2.0TR chipbreaker is designed to manage chip form during turning operations, producing short, controllable chips under medium to robust cutting conditions. Effective chip control reduces the risk of entanglement, minimises machine downtime and improves operator safety. In practical terms, stable chips contribute to a steadier cutting process and often a better initial surface finish, meaning less secondary work and a smoother workflow on the shop floor. Repeatability and integration for series manufacturing As an indexable insert, the TS16 geometry supports quick indexing and consistent edge positioning, which helps maintain dimensional accuracy across multiple workpieces. The WMP32G grade’s balanced wear resistance and toughness suit serial production where repeatable performance and predictable tool life matter. From process planning to production runs, the insert offers a combination of endurance and ease of replacement that assists in maintaining stable manufacturing output without complex parameter changes. For application-specific advice or to discuss toolholder compatibility and cutting data for the TS16-ER2.0TR WMP32G from Walter Tools, contact Metav Werkzeuge – email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support and supply options Technical Data Article number: TS16-ER2.0TR-WMP32G-WALTER Item designation: TS16-ER2.0TR WMP32G Product type: Indexable turning insert Manufacturer: Walter Tools Facts Suitable for rostfreiem Stahl: Yes Special features Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER2.0TR Substrate: coated carbide Application focus: medium to robust conditions for rostfreiem Stahl FAQ What materials is this insert suitable for? The TS16-ER2.0TR WMP32G is specified for machining rostfreiem Stahl and is tuned to handle the toughness and heat characteristics of such alloys. How does the ER2.0TR chipbreaker improve processes? The ER2.0TR chipbreaker on this Walter Tools insert produces controllable chips, reducing entanglement and stoppages and supporting consistent cycle times. Is the WMP32G grade coated? Yes, WMP32G is a coated carbide grade within the Tiger·tec Gold family, formulated for balanced wear resistance and edge stability in rostfreiem Stahl applications. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Walter Tools is mentioned for identification and descriptive purposes only; there is no affiliation between our company and the named manufacturer. The offered article is an original, factory-new product of Walter Tools.
TS16-ER2.5ISO WMP22G WMP22G Wendeplatten - Walter Tools
Benefit from reliable chip control and extended tool life thanks to the Tiger‑tec Gold coating and the WMP22G grade; these features combine for stable cutting results and fewer process interruptions. Order the TS16-ER2.5ISO WMP22G indexable turning insert directly via Metav Werkzeuge or ask our consultants if needed. TS16-ER2.5ISO WMP22G indexable turning insert, Tiger‑tec Gold coating, for stainless steel — Walter Tools The TS16-ER2.5ISO WMP22G is an indexable turning insert engineered to deliver stable chip formation and durable cutting performance in stainless steel machining applications. Tiger‑tec Gold coated for longer tool life WMP22G grade for stable chip formation ER2.5ISO chipbreaker optimised for stainless Precision fit for TS16 tool holders Predictable wear and longer tool life for stainless applications The Tiger‑tec Gold coating combined with the WMP22G grade provides a balanced mix of wear resistance and heat management that reduces the risk of built‑up edge when machining stainless steel. Coatings of this type use multilayer wear‑protective systems to lower friction and slow abrasive wear; as a result, machinists benefit from a consistent cutting edge over multiple indexings, which reduces unplanned tool changes and increases uptime. The insert's micro‑geometry supports a controlled transition between chip formation and chip evacuation, translating coated‑carbide technology into tangible process reliability. Improved chip control and fewer interruptions during production The chipbreaker ER2.5ISO is designed to produce short, manageable chips in materials that tend to form long, stringy swarf. By controlling chip shape at typical feed rates for stainless alloys, the insert minimises entanglement and tool‑holder fouling, allowing higher effective cutting feeds and more stable cycle times. This chip control improves process security and lowers the frequency of operator intervention, which contributes directly to improved overall equipment effectiveness. The result is a measurable efficiency gain in series turning operations. Seamless integration and economic productivity on the shop floor With the TS16 interface geometry, the insert offers a precision fit into standard TS16 tool holders, ensuring repeatable seating and secure clamping. That mechanical stability supports predictable performance, making it easier to set up programmes and maintain tolerances across batches. Because the system focuses on durable edge life and repeatability rather than peak single‑pass removal, the insert supports an economical workflow: fewer tool changes, consistent surface finish, and reduced scrap rates. For production planners, that means more predictable output and lower per‑component tooling costs. Contact Metav Werkzeuge today for tailored recommendations on the TS16-ER2.5ISO WMP22G insert and to discuss optimal cutting parameters for stainless steel applications Technical data Article number: TS16-ER2.5ISO-WMP22G-WALTER Designation: TS16-ER2.5ISO WMP22G Product type: Indexable turning insert (Drehwendeschneidplatte) Series: Tiger‑tec Gold Grade: WMP22G Chipbreaker: ER2.5ISO Material code: M Manufacturer: Walter Tools UID: TS16-ER2.5ISO-WMP22G-WALTER Facts Material group: M (stainless steel) Geometry: TS16 interface Coating: Tiger‑tec Gold (coated cemented carbide) Special features Optimised for machining stainless steel Stable chip formation and reduced built‑up edge Coated carbide grade for balanced wear resistance ER2.5ISO chipbreaker for short chips Precision seating for TS16 tool holders FAQ What materials is this insert suitable for? The TS16-ER2.5ISO WMP22G is specified for stainless steel applications (material group M) and is formulated to manage the particular chip and heat behaviour of these alloys. What does the WMP22G grade indicate? WMP22G is Walter's coated‑carbide grade within the Tiger‑tec Gold family, optimised for a balance of wear resistance and edge stability when machining stainless steels under medium to robust cutting conditions. How does the ER2.5ISO chipbreaker affect machining? The ER2.5ISO chipbreaker produces short, controlled chips in stainless materials, improving chip control and reducing the risk of swarf-related interruptions and tool‑holder fouling. Can this insert be used for hardened steels or general steel? The available data lists suitability for stainless steel (M); there is no indication that the insert is specified for hardened steels or for general unalloyed steel in this dataset. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered item is original and brand‑new from the manufacturer.
TS16-ER2.5ISO WMP32G Wendeplatten - Walter Tools
Combining the Tiger‑tec Gold coating with the WMP32G grade, the TS16‑ER2.5ISO insert delivers durable cutting performance and stable chip control for rostfreier Stahl applications; the ER2.5ISO chipbreaker reduces built‑up edge and supports predictable cycle times. Order the TS16‑ER2.5ISO WMP32G directly via Metav Werkzeuge or ask our consultants if needed TS16-ER2.5ISO WMP32G indexable turning insert — Tiger‑tec Gold for rostfreier Stahl (Walter Tools) TS16-ER2.5ISO WMP32G is an indexable turning insert designed for demanding machining of rostfreier Stahl, combining a Tiger‑tec Gold coating with an ER2.5ISO chipbreaker for stable, productive cutting Tiger‑tec Gold coating for extended tool life WMP32G grade optimised for rostfreier Stahl ER2.5ISO chipbreaker for stable chips Coated carbide for productive machining Improved process reliability when machining rostfreier Stahl The combination of the WMP32G grade and Tiger‑tec Gold technology targets the specific challenges of machining rostfreier Stahl, where toughness and heat build‑up commonly cause edge degradation. The coated carbide substrate provides a wear‑resistant surface that supports stable chip formation and reduces the tendency for built‑up edge. As a result, cycle times become more predictable and insert life is extended, which translates into fewer tool changes and higher overall machine availability. Better surface finish and consistent cutting performance The ER2.5ISO chipbreaker geometry controls chip flow and fragment size, leading to improved surface quality and reduced risk of seizing or stringy chips during medium to robust cutting conditions. The insert’s coated carbide construction offers a balance between hardness and fracture resistance, making it suitable for repeated machining operations on rostfreier Stahl without frequent edge failures. For operations where reproducible results matter, this translates directly into less rework and greater first‑pass quality. Seamless integration and handling benefits for production Marked as TS16‑ER2.5ISO, the insert fits standard toolholders for turning operations and is simple to replace when resharpening intervals are reached. Its specification supports cost‑effective planning: optimised chip control and a robust coating reduce maintenance intervals and promote continuous production. For process planners, the predictable behaviour of this insert simplifies cutting parameter selection and helps maintain consistent throughput in batch or continuous machining. For reliable machining of rostfreier Stahl with the Tiger‑tec Gold TS16-ER2.5ISO WMP32G, contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TS16-ER2.5ISO-WMP32G-WALTER Name: Drehwendeschneidplatte TS16-ER2.5ISO WMP32G Walter Tools Manufacturer: Walter Tools Core specifications Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: ER2.5ISO Material group: M (rostfreie Stähle) SKU: TS16-ER2.5ISO-WMP32G-WALTER Features & application Coated carbide (Tiger‑tec Gold technology) Optimised for rostfreier Stahl machining Stable chip formation and reduced built‑up edge Productive, repeatable cutting performance Suitable for medium to robust cutting conditions FAQ Is this insert suitable for machining rostfreier Stahl? Yes. The TS16‑ER2.5ISO WMP32G is specifically formulated for rostfreier Stahl, combining the WMP32G grade and Tiger‑tec Gold coating to manage toughness and heat during cutting. What benefits does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the TS16‑ER2.5ISO WMP32G improves wear resistance and supports stable chip control, which extends tool life and helps maintain consistent surface quality. Which chipbreaker does this insert use and why does it matter? The insert uses the ER2.5ISO chipbreaker; this geometry produces manageable chip forms and lowers the risk of built‑up edge, enhancing process stability for turning operations. Can the TS16‑ER2.5ISO insert be used in standard toolholders? Yes. The TS16 designation aligns with common indexable turning insert interfaces, allowing straightforward integration into compatible toolholders without special adaptation. What cutting conditions is the insert intended for? The WMP32G grade is intended for medium to robust cutting conditions on rostfreie Stähle, offering a compromise between wear resistance and fracture toughness for productive machining. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Brand names and registered trademarks are the property of their respective owners. Trademarks and brand names are mentioned solely for explanatory purposes and do not indicate any affiliation between our company and the manufacturers. The offered item is original, brand‑new merchandise from the manufacturer.
TS16-ER2.5ISO-F5 WMP32G Wendeplatten - Walter Tools
Die robuste combination of high wear resistance and secure chip control makes this turning insert a reliable choice for consistent production results; its Tiger·tec Gold grade and ER2.5ISO-F5 chipbreaker deliver stable cutting under the demands of rostfreier Stahl machining. Order or request personal advice via Metav Werkzeuge for fast, application-specific guidance. TS16-ER2.5ISO-F5 WMP32G — Turning insert for rostfreier Stahl by Walter Tools TS16-ER2.5ISO-F5 WMP32G is a coated carbide turning insert designed for medium to heavy-duty machining of rostfreier Stahl, offering secure edge stability and reliable chip control. Tiger·tec Gold coated carbide grade WMP32G Optimised for rostfreier Stahl machining Stable chip control and extended edge life ISO TS16-ER2.5 insert geometry Improved throughput through consistent edge life The combination of Tiger·tec Gold technology and the WMP32G grade provides a balance between toughness and wear resistance that benefits serial turning operations. The advanced coating system increases resistance to abrasive wear while maintaining a stable cutting edge under thermal load; this reduces unscheduled tool changes and supports predictable tool life. For production planners, this means fewer interruptions and more predictable machining cycles—an economic gain that often pays back through reduced downtime and fewer insert replacements. Predictable surface quality and reliable chip behaviour The ER2.5ISO-F5 chipbreaker is engineered for the challenges of rostfreier Stahl, where material adhesion and built-up edge formation are common. With a geometry optimised to break and evacuate chips efficiently, the insert minimises surface damage and stabilises cutting forces. The result is a consistent surface finish with fewer rework steps and improved repeatability across batches. Technicians less familiar with insert geometry will benefit from the clear correlation between chipbreaker design and process stability. Application guidance and process fit This turning insert is suited to conventional turning operations in rostfreier Stahl where medium to robust cutting parameters are required. The coated carbide substrate addresses the high heat and ductility typical of these alloys, supporting secure chip formation and reducing tendencies to gall or stick. When integrating this insert into existing processes, pairing it with suitable cutting parameters and coolant strategy will leverage its stable chip control and maximise productivity. For conversion from other grades, expect improved edge retention under comparable cutting conditions. For tailored advice on applying Tiger·tec Gold inserts in rostfreier Stahl machining or to secure the TS16-ER2.5ISO-F5 WMP32G from Walter Tools, contact Metav Werkzeuge for application-specific recommendations and fast supply. Technical Data Article number: TS16-ER2.5ISO-F5-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-ER2.5ISO-F5 WMP32G Walter Tools Manufacturer: Walter Tools Type: Drehwendeschneidplatte Designation: TS16-ER2.5ISO-F5 WMP32G Facts Material group: M (rostfreie Stähle) Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: ER2.5ISO-F5 Special features Coated carbide (beschichtetes Hartmetall) ISO geometry TS16 Optimised for stable chip formation Suitable for rostfreier Stahl machining FAQ What materials is this insert designed for? This turning insert is optimised for rostfreier Stahl and specified as grade WMP32G within the Tiger·tec Gold series by Walter Tools. How does the ER2.5ISO-F5 chipbreaker affect machining? The ER2.5ISO-F5 chipbreaker promotes reliable chip segmentation and evacuation, improving surface finish and reducing edge build-up when machining rostfreier Stahl. Is the insert suitable for medium and heavy cutting conditions? Yes, the WMP32G grade and coated carbide substrate are intended for medium to robust cutting regimes, providing good edge stability under higher thermal loads. Which ISO designation should be referenced for holder compatibility? Refer to the TS16 geometry designation (TS16-ER2.5ISO-F5) for matching toolholders and clamping systems. Will using this insert reduce rework on finished parts? The combination of stable chip control and wear-resistant coating typically leads to fewer surface defects and less rework when applied with appropriate cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and product designations are used for explanatory purposes only and do not imply any affiliation with or endorsement by the trademark owners. The offered item is an original, factory-new product of Walter Tools.
TS16-ER2.5ISO-M5 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for reliable machining of stainless steel; the result is stable chip control and extended edge life. Order the insert directly via Metav Werkzeuge or consult the specialists for application support. TS16-ER2.5ISO-M5 WMP32G – Indexable turning insert with Tiger·tec Gold coating for stainless steel | Walter Tools The TS16-ER2.5ISO-M5 WMP32G is a coated carbide indexable turning insert engineered for secure chip formation and consistent performance when machining stainless steel in medium to robust cutting conditions Tiger·tec Gold coated carbide grade WMP32G Optimised for stainless steel machining Stable cutting edge and predictable chip control Designed for medium to heavy cutting conditions Consistent performance for stainless steel turning The combination of a coated carbide substrate and the Tiger·tec Gold technology gives this insert outstanding resistance to adhesion and thermal softening when machining stainless steel. The chemical and mechanical challenges of these alloys — high toughness, tendency to work-harden and heat generation — are addressed by the insert’s composition, which promotes stable chip formation and reduces the risk of built-up edge. As a result, process windows remain wider and machining parameters can be run with greater confidence, improving throughput on serial turning operations. Reduced interruptions through reliable edge life Designed with the WMP32G grade, the insert offers a predictable wear pattern that minimises unscheduled tool changes. The substrate and coating combination slows flank and crater wear, translating into longer intervals between indexings and a lower total number of inserts required. For production environments this means fewer stoppages for tooling intervention and a clearer view of cost-per-part. The indexable insert geometry TS16-ER2.5ISO-M5 supports repeatable seating in standard toolholders, ensuring consistent cutting geometry from one replacement to the next. Improved surface finish and process control The ER2.5ISO-M5 chipbreaker profile is tuned to break chips effectively during moderate to heavy cuts, which enhances coolant access and lowers the chance of entangling swarf. Better chip control leads directly to a more reliable surface quality and reduces the need for secondary finishing. In addition, the stable cutting edge mitigates vibration and irregular wear, so the component finish remains consistent across batches. For shops aiming to balance productivity with component quality, this insert provides a technical advantage in demanding stainless steel turning applications. For high‑performance stainless steel turning, choose the Walter Tools TS16-ER2.5ISO-M5 WMP32G and contact Metav Werkzeuge for tailored application advice and availability — eMail: info@metav-werkzeuge.com or Phone: +49 2822 7131930 Technical Data Article number: TS16-ER2.5ISO-M5-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-ER2.5ISO-M5 WMP32G Walter Tools Grade: WMP32G Series: Tiger·tec Gold Core data ISO designation: TS16-ER2.5ISO-M5 WMP32G Material group: M (stainless steel) Geometry: TS16 indexable insert form Special features Coating and substrate: Tiger·tec Gold coated carbide Chipbreaker: ER2.5ISO-M5 Application range: Medium to robust conditions for stainless steel machining FAQ Is this insert suitable for stainless steel turning? Yes. The WMP32G grade and Tiger·tec Gold coating are specifically optimised for stainless steel, providing secure chip formation and reduced adhesive wear during turning. What does the ER2.5ISO-M5 chipbreaker do? The ER2.5ISO-M5 chipbreaker promotes controlled chip segmentation during medium to heavy cuts, improving swarf evacuation and supporting a consistent surface finish with less risk of entanglement. Which toolholders accept this insert geometry? The TS16 designation indicates compatibility with toolholders designed for TS16 indexable inserts; the insert is intended for standard clamping systems that accept this geometry. Is the insert better for roughing or finishing? The insert is engineered for medium to robust cutting conditions, making it suitable for semi‑roughing and many finishing operations on stainless steel where stable cutting edges and chip control are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-ER20UN WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, optimised chip control and long tool life for efficient stainless steel turning. Order the insert via Metav Werkzeuge or consult the technical team for a tailored machining recommendation. TS16-ER20UN WMP32G indexable turning insert — Tiger‑tec Gold grade for stainless steels (Walter Tools) The TS16-ER20UN WMP32G is an indexable turning insert engineered for medium to robust machining of stainless steels, providing stable chip formation and consistent surface quality in production environments. Tiger‑tec Gold coating for long tool life Optimised for stainless steel (ISO M) ER20UN chipbreaker for stable chips Coated carbide grade WMP32G High-performance coating for demanding materials The Tiger‑tec Gold coating system and the WMP32G grade combine to deliver a balanced resistance against heat and adhesion during turning of stainless steels (ISO M). The multilayer coating reduces friction at the cutting edge, which helps to limit built-up edge and preserves the cutting geometry for extended periods. This technical pairing supports higher cutting speeds and consistent dimensional results under medium to robust conditions, translating into predictable cycle times and reduced process interruptions. Engineered chip control that stabilises the cut The ER20UN chipbreaker is designed to produce manageable chips when machining tough, ductile materials typical of the M group. By shaping chip flow and shortening chip length, the chipbreaker lowers the risk of entanglement and improves evacuation from the cutting zone. Improved chip formation reduces thermal spikes at the edge and contributes to repeatable surface finish, making the cutting process more reliable and easier to integrate into automated turning centres. Robust substrate and wear behaviour for production use The insert’s coated carbide substrate and the specific microstructure of the WMP32G grade ensure resistance to abrasive and adhesive wear mechanisms common in stainless steel turning. The result is a stable cutting edge that maintains a sharp profile for longer, which reduces the frequency of indexings and tool changes. Less downtime for tool handling helps to keep throughput steady and lowers indirect production costs associated with machine stoppages. Process advantages: consistent quality and efficiency Incorporating this insert into turning cycles contributes to shorter set-up times and more consistent part quality. The coating and grade combination supports a favourable cost-per-part calculation by extending effective tool life and allowing for more aggressive feeds where appropriate. These rational benefits are particularly relevant for batch production and contract manufacturers seeking to improve output without compromising surface integrity. Practical handling and compatibility in the workshop The indexable format simplifies stock management and tool change procedures: worn corners are re-indexed rather than replaced, which conserves tooling investment. The geometry and chipbreaker pairing are compatible with standard turning toolholders designed for this insert form, enabling straightforward integration into existing tool systems. Technical documentation supplied with the insert details recommended cutting directions and typical parameter windows for initial trials. Recommended applications and machining scope This insert suits turning operations on ferritic, austenitic and other stainless steels where moderate to robust cutting conditions occur. It is intended for shops prioritising process stability and surface quality in serial production. The SKU TS16-ER20UN-WMP32G-WALTER identifies the specific product variant within the Tiger‑tec Gold series and facilitates accurate ordering and stock control. Discuss selection and process parameters for Walter Tools Tiger‑tec Gold inserts with Metav Werkzeuge’s technical advisors via info@metav-werkzeuge.com or by phone at +49 2822 7131930 for a machining setup tailored to stainless steel turning applications. Technical Data SKU: TS16-ER20UN-WMP32G-WALTER Name: TS16-ER20UN WMP32G Brand: Walter Tools Product type: indexable turning insert Facts Material group: M (stainless steels, ISO M) Chipbreaker: ER20UN Coating system: Tiger‑tec Gold Special features Grade: WMP32G (coated carbide) Optimised for medium to robust conditions Designed for stable chip formation and reduced built-up edge Suitable for serial production turning of stainless steels FAQ What materials is this insert intended for? The insert is formulated for machining stainless steels (ISO M); the WMP32G grade and Tiger‑tec Gold coating target the adhesion and heat-related challenges of these materials. How does the ER20UN chipbreaker help in turning operations? The ER20UN chipbreaker shapes and fragments chips to improve evacuation and reduce entanglement, which stabilises the cutting process and supports consistent surface finish when turning ductile stainless steels. What machining benefits can be expected from the WMP32G grade? WMP32G offers a balance of wear resistance and edge stability under medium to robust conditions, extending tool life and enabling more predictable production cycles with fewer indexings. How is the product identified for ordering and stock control? The SKU TS16-ER20UN-WMP32G-WALTER uniquely identifies this Tiger‑tec Gold indexable turning insert for procurement and inventory purposes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the brands named. The offered item is an original, factory-new product of the manufacturer Walter Tools.
TS16-ER20UN-F5 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WMP32G grade for reliable machining of stainless steel, delivering stable chip formation and consistent edge life; order directly via Metav Werkzeuge or request application advice from our consultants. TS16-ER20UN-F5 WMP32G indexable turning insert – Tiger‑tec Gold, for stainless steel (Walter Tools) The TS16-ER20UN-F5 WMP32G is an indexable turning insert from the Tiger‑tec Gold series, designed for dependable performance in medium to robust stainless steel turning applications Tiger‑tec Gold coated carbide grade Optimised for stainless steel machining Stable chip formation under robust conditions Consistent edge life for productive runs Increased process security when machining stainless steel The Tiger‑tec Gold WMP32G grade combines a modern coated carbide substrate with an optimised edge structure to address typical challenges when machining stainless steel: high toughness, tendency to build up material on the cutting edge and elevated thermal load. The coating and grade work together to improve chip control and reduce the risk of edge breakdown, which translates into fewer interruptions and more predictable cycle times on turning operations. This results in a measurable gain in operational reliability for workshops handling a range of austenitic and martensitic stainless steels. Greater productivity through consistent edge life Designed for medium to robust conditions, the insert’s geometry and the ER20UN‑F5 chipbreaker promote stable cutting behaviour across varying depths of cut. The result is consistent edge life, which supports longer runs between indexings and reduces tool change frequency. For production environments where uptime and throughput matter, this stability means improved process economics and less setup variability. The combination of grade and chipbreaker also supports repeatable surface quality, helping to meet dimensional and finish requirements with fewer reworks. Practical application and machine compatibility for turning The TS16‑ER20UN‑F5 geometry is compatible with standard clamping systems for indexable turning, enabling straightforward integration into existing toolholders and toolpacks. The insert is suitable for conventional and CNC lathes where reliable stainless steel turning is required; the WMP32G grade offers a balance of wear resistance and toughness to handle interrupted cuts common in everyday shop work. For shops seeking a versatile insert that reduces process variation while keeping machining cycles efficient, this indexable solution is a pragmatic choice. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger‑tec Gold inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TS16-ER20UN-F5-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-ER20UN-F5 WMP32G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Series: Tiger‑tec Gold Grade: WMP32G Chipbreaker: ER20UN-F5 Designation: TS16-ER20UN-F5 WMP32G Facts Material group: M Applicable material class: ISO M (stainless steel) Material code: M SKU: TS16-ER20UN-F5-WMP32G-WALTER Special features Coating technology: Tiger‑tec Gold Carbide grade: WMP32G (coated cemented carbide) Optimised for rostfreier Stahl (stainless steel) Chip control: ER20UN‑F5 breaker Typical use: Indexable turning operations FAQ What materials is this insert intended for? The TS16-ER20UN-F5 WMP32G insert is specifically intended for machining stainless steel (ISO group M), offering improved chip control and edge stability for austenitic and similar alloys. Which coating and grade does the insert use? The insert uses the Tiger‑tec Gold coating technology and the WMP32G coated carbide grade, a combination that balances wear resistance and toughness for robust stainless steel turning. How does the ER20UN‑F5 chipbreaker affect cutting performance? The ER20UN‑F5 chipbreaker on the TS16-ER20UN-F5 WMP32G promotes controlled chip formation and evacuation, reducing built‑up edge and helping to maintain consistent surface finish and dimensional stability. Is this insert suitable for interrupted cuts and heavier engagement? Yes, the WMP32G grade and insert geometry are designed for medium to robust conditions, providing the toughness required for intermittent engagement and variable cutting forces. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (marketed as Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Mentioned brand names are used for explanatory purposes only and do not imply any affiliation with Metav Werkzeuge.
TS16-ER20UNJ WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP22G carbide grade for reliable machining of stainless steel, ensuring stable chip formation and extended edge life; order the insert directly through Metav Werkzeuge or consult the specialists for application advice. TS16-ER20UNJ WMP22G — Indexable turning insert, Tiger·tec Gold coating, Walter Tools (for stainless steel) The TS16-ER20UNJ WMP22G is an indexable turning insert engineered to provide consistent cutting performance for stainless steel in medium to robust machining conditions. Tiger·tec Gold coating for long tool life Optimised ER20UNJ chipbreaker for stainless steel Coated carbide WMP22G for stable cutting edges Designed for medium to heavy machining Greater process reliability when machining stainless steel The combination of Tiger·tec Gold technology and the WMP22G grade produces a coated carbide surface that resists edge wear and reduces the tendency for built-up edge when machining stainless steel. This results in more predictable tool behaviour and fewer unscheduled tool changes, which directly supports higher uptime in production environments. The insert’s geometry promotes controlled chip formation, helping to avoid clogging and thermal spikes that typically challenge stainless alloy machining. Predictable edge life and improved chip control The integrated ER20UNJ chipbreaker is tailored for stainless materials to enhance chip control and reduce cutting forces during interrupted cuts. By favouring continuous, manageable chips, the insert contributes to steadier surface quality and reduces the likelihood of rework. The coated indexable insert therefore supports consistent part tolerances and lowers overall process variance, offering a measurable productivity advantage for batch production and subcontract machining. Practical guidance for shop-floor integration The TS16-ER20UNJ WMP22G insert suits conventional lathe and turning operations where robust performance is required. As a coated carbide product, it benefits from appropriate coolant strategies and stable clamping to exploit its tool life potential; good fixture rigidity and correct axial engagement help maintain the stable cutting edge. For workshops with mixed stainless work, the grade’s balance between wear resistance and toughness simplifies tool allocation and reduces the need for frequent grade switching. Contact Metav Werkzeuge for availability and application recommendations for the Walter Tools TS16-ER20UNJ WMP22G insert — technical advice and stock information are available via eMail: info@metav-werkzeuge.com or by phone: +49 2822 7131930 Technical data Article number: TS16-ER20UNJ-WMP22G-WALTER Article designation: TS16-ER20UNJ WMP22G Product type: Drehwendeschneidplatte (indexable turning insert) Series: Tiger·tec Gold Facts No numerical data provided Special features Grade: WMP22G (coated carbide) Chipbreaker: ER20UNJ Suitable for: stainless steel (ISO group M) Coating technology: Tiger·tec Gold Application: medium to robust machining conditions FAQ What materials is this insert intended for? The TS16-ER20UNJ WMP22G insert from Walter Tools is intended primarily for stainless steel, corresponding to ISO material group M. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WMP22G grade increases wear resistance while maintaining edge toughness, which supports longer intervals between indexings and steadier productivity. What role does the ER20UNJ chipbreaker play? The ER20UNJ chipbreaker improves chip formation and evacuation when machining stainless steel, reducing built-up edge and promoting consistent surface finish. Is this insert suitable for heavy interrupted cuts? The combination of WMP22G grade and the ER20UNJ geometry is designed for medium to robust conditions; however, machine rigidity and correct clamping are essential for demanding interrupted cutting operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-ER20UNJ WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WMP32G grade for reliable chip control and extended tool life in rostfreier Stahl turning; purchase and technical advice are available via Metav Werkzeuge. TS16-ER20UNJ WMP32G indexable turning insert — Tiger‑tec Gold coating, for rostfreier Stahl | Walter Tools The TS16-ER20UNJ WMP32G is an indexable turning insert engineered for secure, repeatable machining of rostfreier Stahl under medium to robust cutting conditions. Tiger‑tec Gold coating for wear resistance WMP32G grade for rostfreie Stähle ER20UNJ chipformer for stable chip control Coated carbide construction for extended tool life Consistent cutting performance for rostfreier Stahl The combination of the Tiger‑tec Gold technology and the WMP32G grade provides a balance of hardness and toughness tailored for rostfreier Stahl. The coating system supports temperature resistance and reduces adhesion on the cutting edge, which in turn improves chip control and minimises the risk of built‑up edge. For workplaces where interrupted cuts or variable workpiece conditions occur, this insert delivers process stability and predictable tool behaviour, helping to reduce downtime and scrap rates. Reliable tool life and economical machining Designed as a coated carbide insert, this grade emphasises long service intervals and repeatable edge integrity. A stable cutting edge reduces frequency of index changes and tool regrinds, which translates into lower tool‑related throughput costs and higher machine availability. The insert’s material composition and coating are chosen to withstand the typical heat and strain of rostfreier Stahl machining, making it a practical choice where longevity and predictable reconditioning cycles are priorities. Practical guidance for application and mounting The ER20UNJ chipformer is designed to support secure chip breaking and guided chips in turning operations on rostfreier Stahl. When mounted in a compatible tool holder, the insert’s geometry promotes controlled chip flow and consistent surface finish. Careful selection of cutting parameters—moderate speeds and stable feed—will leverage the insert’s strengths; reach out to technical advisors for suggested starting values based on the specific rostfreier Stahl grade and machine capabilities. Integration into production and quality assurance From a process‑planning perspective, the insert is suitable where repeatability and process reliability are required. It integrates into established tool families and inventory systems as a standard indexable component, simplifying tool management. The Walter Tools brand underpins the design with an emphasis on precision and consistent performance; when combined with methodical cutting data, the insert supports reproducible part quality and efficient batch production. Contact Metav Werkzeuge for tailored recommendations on integrating the Walter Tools TS16-ER20UNJ WMP32G insert into existing setups and to receive machining parameter guidance for rostfreier Stahl applications Technical data SKU: TS16-ER20UNJ-WMP32G-WALTER Article designation: TS16-ER20UNJ WMP32G Product type: indexable turning insert Manufacturer: Walter Tools Facts Material group: M (rostfreie Stähle) Special features Series: Tiger‑tec Gold Grade: WMP32G (coated carbide) Chipformer: ER20UNJ ISO designation: TS16-ER20UNJ WMP32G Intended application: rostfreier Stahl machining Story trigger: indexable inserts FAQ What materials is this insert suitable for? The TS16-ER20UNJ WMP32G is specified for machining rostfreier Stahl; the WMP32G grade is optimised for these material groups. What does the Tiger‑tec Gold series offer? Tiger‑tec Gold is a coating and substrate combination that enhances wear resistance and heat tolerance, improving the insert’s durability in demanding rostfreier Stahl applications. How does the ER20UNJ chipformer affect machining? The ER20UNJ geometry promotes controlled chip breaking and stable chip evacuation, contributing to consistent surface finish and reduced risk of built‑up edge when turning rostfreier Stahl. Is this insert a coated carbide type? Yes, the WMP32G designation indicates a coated carbide construction designed for extended tool life in rostfreier Stahl machining. Can the insert be used in interrupted cuts? The material and coating combination of this insert are intended to perform under medium to robust conditions, including many interrupted‑cut scenarios; final suitability depends on the specific rostfreier Stahl grade and cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation between our company and the listed manufacturers. The offered item is original, factory‑new goods of the manufacturer Walter Tools.
TS16-ER20W WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, optimised ER20W chip control and a carbide grade tuned for rostfreier Stahl to ensure consistent turning performance and reduced tool changes. Order the TS16-ER20W WMP32G indexable turning insert directly via Metav Werkzeuge or ask our consultants for guidance. TS16-ER20W WMP32G indexable turning insert (for rostfreier Stahl) – Walter Tools, Tiger‑tec Gold The TS16-ER20W WMP32G is an indexable turning insert engineered for reliable machining of rostfreier Stahl under medium to robust conditions, combining a coated carbide grade with a dedicated chipbreaker for stable cutting. Tiger‑tec Gold coating Optimised chip control ER20W For rostfreier Stahl (M group) Coated carbide for longer tool life Consistent cutting performance for rostfreier Stahl The combination of the WMP32G grade and Tiger‑tec Gold coating delivers a balance of wear resistance and edge stability that is particularly suited to rostfreier Stahl. This coated carbide grade counters common challenges such as material toughness and built-up edge by supporting secure chip formation and improved thermal management. For workshops focused on predictable cycle times, the insert’s specification reduces the frequency of tool changes and helps maintain surface quality across batch runs. Reduced interruptions through optimised chip control The ER20W chipbreaker is designed to control chip shape and evacuation during turning operations, which lowers the risk of entanglement and machine downtime. The insert’s geometry contributes to a stable cutting edge that tolerates medium to robust cutting conditions; this translates into fewer stoppages for chip clearing and a more continuous production flow. In practice, better chip control can lead to measurable improvements in throughput and a reduction in secondary handling. Practical choice for machining stability and repeatability Specified for the M material group, this indexable insert supports rostfreier Stahl applications where both surface finish and tool life matter. The coated, hardmetal construction ensures that edge wear progresses predictably, facilitating repeatable part quality. For decision-makers, the clear technical concept behind the insert—coating technology, grade selection and chipbreaker design—offers a rational argument for selection when process reliability and component consistency are priorities. For precision turning of rostfreier Stahl with Walter Tools’ Tiger‑tec Gold technology, contact Metav Werkzeuge for specialist advice and rapid availability. Technical Data SKU: TS16-ER20W-WMP32G-WALTER Article designation: TS16-ER20W WMP32G Type: Indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Core data Grade: WMP32G Material group: M (rostfreie Stähle) Chipbreaker: ER20W Series: Tiger‑tec Gold Special features Coating: Tiger‑tec Gold Coated carbide Application: rostfreier Stahl, medium to robust conditions Optimised chip control Stable cutting edge FAQ What materials is this insert designed for? The TS16-ER20W WMP32G insert is specified for machining rostfreier Stahl (material group M) under medium to robust conditions. How does the Tiger‑tec Gold coating benefit machining? The Tiger‑tec Gold coating on the TS16-ER20W WMP32G increases wear resistance and supports stable edge life when turning rostfreier Stahl. What advantage does the ER20W chipbreaker provide? The ER20W chipbreaker on this insert offers optimised chip control, reducing the risk of chip entanglement and interruptions during turning. Is this insert suitable for continuous production runs? Yes; the grade and coating combination of the TS16-ER20W WMP32G is designed for repeatable performance and longer tool life, making it suitable for continuous batch production. Which toolholders are compatible with TS16-ER20W inserts? Toolholders that accept the TS16-ER20W geometry and clamping interface are compatible; the insert designation TS16-ER20W WMP32G indicates the required form and seat. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Walter Tools is part of the Walter AG group and is mentioned here for clarification. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are used for explanatory purposes only; there is no connection between our company and the named brands. The item offered is original, factory-new goods of the manufacturer.
TS16-ER24UN WMP22G Wendeplatten - Walter Tools
TS16-ER24UN WMP22G Drehwendeschneidplatte von Walter Tools Die TS16-ER24UN WMP22G ist eine Drehwendeschneidplatte zur produktiven Zerspanung von rostfreiem Stahl unter mittleren bis robusten Bedingungen. TS16-ER24UN WMP22G von Walter Tools Optimiert für rostfreien Stahl (ISO M) Tiger·tec Gold Beschichtung für lange Standzeit ER24UN Spanformer für stabile Spanbildung Beschichtetes Hartmetall für konstante Schneidkante Höhere Prozesssicherheit durch stabiles Spanverhalten Die TS16-ER24UN WMP22G bietet eine gezielte Kombination aus beschichtetem Hartmetall und moderner Beschichtungstechnologie, die stabiles Spanverhalten fördert. Das Ergebnis ist eine reduzierte Neigung zum Aufbauschneiden und eine konstante Schneidkante, was sich direkt in höherer Werkzeugstandzeit und planbaren Rüstintervallen niederschlägt. Ein Vorteil für Betriebe, die konstante Fertigungsqualität und wirtschaftliche Zyklen benötigen. Beschichtung und Materialkompetenz für rostfreie Stähle Die Sorte WMP22G nutzt die Tiger·tec Gold Technologie und ist speziell für die Bearbeitung von rostfreiem Stahl (ISO M) ausgelegt. Beschichtetes Hartmetall in dieser Ausführung unterstützt sichere Spanbildung bei zähen Werkstoffen und reduziert thermische Belastungen an der Schneidkante. Für Anwender bedeutet das weniger Ausfälle und bessere Oberflächengüten bei Serienfertigungen. Geeignet für Produktionsbetriebe mit mittleren bis robusten Bedingungen Werkstätten und Fertigungsbetriebe, die regelmäßig rostfreien Stahl bearbeiten, profitieren von der zuverlässigen Performance und der breiten Werkstoffabdeckung. Die Wendeschneidplatte ermöglicht konstante Ergebnisqualität bei variierenden Schnittbedingungen und trägt zur Prozessstabilität bei. Dadurch lassen sich Ausschussraten senken und Nacharbeit reduzieren, was die Gesamtkosten senkt. Einfache Integration und praxisnahe Einsatzvorteile Der ER24UN Spanformer wurde entwickelt, um auch bei wechselnden Zustellungen stabile Späne zu erzeugen. Wendeschneidplatten sind aufgrund ihrer modularen Nutzung einfach in gängige Werkzeughalter integrierbar, wodurch Rüstzeiten minimiert werden. Technische Anwender erhalten so ein zuverlässiges Werkzeug, das in Serienprozessen die Produktivität unterstützt. Empfehlen wir den Einsatz der WMP22G Sorte von Walter Tools für alle Anwendungen mit rostfreiem Stahl; bei Fragen zur Prozessauslegung oder Verfügbarkeit steht Metav Werkzeuge gern zur Verfügung – eMail: info@metav-werkzeuge.com / Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: TS16-ER24UN-WMP22G-WALTER Marke: Walter Tools Serie: Tiger-tec Gold Bezeichnung: TS16-ER24UN WMP22G Produktart: Drehwendeschneidplatte Sorte: WMP22G Spanbrecher: ER24UN Fakten Besonderheiten Beschichtungstechnologie: Tiger·tec Gold Sorte: WMP22G (beschichtetes Hartmetall) Spanformer: ER24UN Werkstoffgruppe: M (rostfreie Stähle) Bearbeitbar: rostfreier Stahl FAQ Welche Werkstoffe lassen sich mit der TS16-ER24UN WMP22G bearbeiten? Die TS16-ER24UN WMP22G von Walter Tools ist speziell für rostfreien Stahl (ISO M) ausgelegt und liefert hier aufgrund der WMP22G-Sorte und der Tiger·tec Gold Beschichtung sichere Spanbildung und konstante Schneidkante. Ist die Wendeschneidplatte für Serienfertigung geeignet? Ja, die Kombination aus beschichtetem Hartmetall und dem ER24UN Spanformer macht die Platte für Serienprozesse mit mittleren bis robusten Bedingungen geeignet, da sie Prozesssicherheit und längere Standzeiten bietet. Wie unterstützt die Tiger·tec Gold Technologie die Bearbeitung? Die Tiger·tec Gold Beschichtung der WMP22G-Sorte verbessert Verschleißwiderstand und Wärmebeständigkeit, was zu stabileren Zyklen und besserer Oberflächengüte bei der Bearbeitung von rostfreiem Stahl führt. Welche Vorteile bringt der ER24UN Spanformer? Der ER24UN Spanformer sorgt für kontrollierte Spanabfuhr und reduziert Aufbauschneiden, wodurch Schnittkraftspitzen und thermische Belastungen an der Schneidkante minimiert werden. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-ER24UN WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, ER24UN chip control and high edge stability to ensure productive and reliable stainless‑steel turning; order the TS16‑ER24UN WMP32G directly via Metav Werkzeuge or consult our technical team for application support. TS16-ER24UN WMP32G — indexable turning insert, Tiger‑tec Gold, for stainless steel by Walter Tools TS16-ER24UN WMP32G is an indexable turning insert engineered for reliable machining of stainless steels in medium to robust cutting conditions Tiger-tec Gold coated carbide grade WMP32G Optimised for stainless steel (ISO M) ER24UN chipbreaker for controlled chips High edge stability and wear resistance Consistent performance for demanding stainless‑steel turning The TS16‑ER24UN WMP32G is based on a coated carbide technology that addresses the typical challenges of machining stainless steel: material toughness, propensity for built‑up edge and high thermal loads. The Tiger‑tec Gold grade provides a balanced combination of hardness and toughness, which promotes stable chip formation and reduces the risk of premature edge failure. As a consequence, process reproducibility is improved and component tolerances can be maintained with fewer interruptions. Improved productivity through reliable chip control The ER24UN chipbreaker geometry is designed to produce short, manageable chips when turning ISO M materials, which enhances chip control and reduces secondary handling. Better chip formation contributes directly to a more constant cutting force, which in turn supports a consistent surface finish and lowers the probability of workpiece damage. The result is a measurable gain in process security and reduced machine downtime during series production. Simplified process planning and longer operating intervals Choosing the WMP32G grade helps to extend tool life under moderate to aggressive operating conditions by combining wear‑resistant properties with good edge stability. This leads to fewer indexings and lower tooling consumption over comparable cycles, supporting higher overall productivity. For specification assistance or confirmation that this insert suits a particular stainless‑steel grade or machining strategy, Metav Werkzeuge’s technical consultants are available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Speak with Metav Werkzeuge’s machining specialists to specify the TS16‑ER24UN WMP32G for optimised stainless‑steel turning and to align cutting data with shop conditions — Metav Werkzeuge is ready to advise and support application setup. Technical Data Article number: TS16-ER24UN-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-ER24UN WMP32G Walter Tools Product type: Indexable turning insert Facts Grade/series: WMP32G / Tiger‑tec Gold Chipbreaker: ER24UN Material suitability: M (stainless steels) Special features Coated carbide grade for robust cutting conditions Optimised for stable chip formation and edge stability Intended application: turning of stainless steels Manufacturer: Walter Tools FAQ What materials is this insert designed to machine? The TS16‑ER24UN WMP32G is specified for stainless steels (ISO group M) and is manufactured as a coated‑carbide insert within the Tiger‑tec Gold family for medium to robust operating conditions. How does the ER24UN chipbreaker improve production? The ER24UN geometry on the TS16‑ER24UN WMP32G produces controlled, short chips that improve chip control, support a consistent surface finish and reduce interruptions due to chip entanglement. Is this insert suitable for high‑temperature turning of stainless steel? The Tiger‑tec Gold coating and the WMP32G grade enhance thermal and wear resistance, making the insert suitable for the elevated temperatures encountered when turning many stainless‑steel alloys. Where can application data and cutting parameters be obtained? Application advice and cutting‑data recommendations for the TS16‑ER24UN WMP32G are available from Metav Werkzeuge’s technical team; the insert’s behaviour is best matched to specific machine, workpiece and coolant conditions. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) is part of the Sandvik group and is a recognised manufacturer of precision cutting tools. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation implied between our company and the named manufacturers. The offered item is an original, factory‑new product of the manufacturer.
TS16-ER24UNJ WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a grade engineered for stainless steel, and a chipbreaker designed for robust cutting to ensure consistent productivity and stable chip control; order the TS16-ER24UNJ WMP22G directly via Metav Werkzeuge or ask the consultants for application advice. TS16-ER24UNJ WMP22G — Indexable turning insert (Tiger·tec Gold) by Walter Tools The TS16-ER24UNJ WMP22G is a coated indexable turning insert optimised for machining stainless steels under medium to robust cutting conditions. Tiger·tec Gold coating for high thermal resistance Grade WMP22G tuned for rostfreie Stähle ER24UNJ chipbreaker for stable chip formation Efficient stainless-steel turning with consistent edge life The combination of the Tiger·tec Gold coating and the WMP22G grade delivers a balance of heat resistance and edge stability that suits the demanding nature of stainless steel machining. Coated carbide reduces friction and protects the carbide substrate during high-temperature contact, which supports longer tool life and fewer tool changes. As a result, production runs benefit from increased uptime and predictable consumable intervals, helping to streamline process planning and reduce unplanned downtime. Predictable chip control and process reliability A well-matched chipbreaker such as ER24UNJ promotes consistent chip formation even under tougher feeds and interrupted cuts. Stable chips reduce the risk of workpiece surface damage and make automated chip handling more reliable. The insert’s geometry and coating combination also help to maintain a secure cutting edge, which improves surface finish quality and reduces the need for secondary operations in many turning applications. Application guidance and compatibility Designed for the ISO material group M, this insert is suited to stainless steels that typically present toughness and heat-related challenges. The TS16-ER24UNJ WMP22G performs best in medium to robust cutting regimes where chip formation and edge security are priorities. For shops seeking to move to more productive turning strategies, the grade’s behaviour supports higher process security and repeatable results across batch and single-piece runs. For ordering, specification support or to discuss the best grade for a given stainless-steel application, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and swift supply. Technical data SKU: TS16-ER24UNJ-WMP22G-WALTER Article designation: TS16-ER24UNJ WMP22G Product type: Indexable turning insert Manufacturer: Walter Tools Grade: WMP22G Series: Tiger·tec Gold Core data Material group: M (stainless steels) Chipbreaker: ER24UNJ Coating type: Tiger·tec Gold Substrate: Coated carbide Features Optimised for medium to robust cutting conditions Stable chip formation and secure cutting edge Suited to applications prone to built-up edge and heat Engineered for repeatable machining performance FAQ What materials is this insert designed for? The TS16-ER24UNJ WMP22G insert is designed primarily for stainless steels (ISO group M), offering secure chip formation and thermal resistance for demanding turning tasks. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on this indexable insert increases surface hardness and thermal protection, which supports longer edge life and improved performance when turning stainless steel. Is the ER24UNJ chipbreaker suitable for interrupted cuts? Yes, the ER24UNJ chipbreaker is engineered to produce stable chips and maintain edge security, making it appropriate for interrupted and robust cutting conditions. Can this insert improve process reliability in serial production? By combining the WMP22G grade and a reliable chipbreaker geometry, the insert helps achieve consistent tool life and predictable chip flow, which enhances overall process reliability in serial production. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and product names remain the property of their respective owners and are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands; the offered item is an original, factory-new product of the manufacturer.
TS16-ER24UNJ WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WMP32G grade and the ER24UNJ chipbreaker for reliable machining of stainless steel; order directly via Metav Werkzeuge or ask our consultants for cutting data and availability. TS16-ER24UNJ WMP32G indexable turning insert — Tiger‑tec Gold coated carbide, for stainless steel — Walter Tools The TS16-ER24UNJ WMP32G is an indexable turning insert engineered for productive turning of stainless steel under medium to robust cutting conditions Tiger·tec Gold coated carbide grade WMP32G Optimised for stainless steel machining Stable cutting edge and reliable chip control Suited to medium to robust cutting conditions High-performance coating and grade for consistent cutting results The combination of Tiger‑tec Gold coating and the WMP32G grade delivers a balanced mix of wear resistance and toughness that supports stable cutting edges when machining stainless steel. The coated carbide construction reduces flank wear and improves resistance to the elevated temperatures typical of these materials, while the composition of the grade promotes secure chip formation. For production environments where consistent component quality is required, this insert reduces unexpected tool changeovers and helps maintain a predictable process window. Predictable productivity and reduced machining risk Designed for medium to robust conditions, this insert offers a predictable service life and contributes to steady cycle times. The ER24UNJ chipbreaker is configured to manage the often gummy chips produced when turning stainless steel, improving evacuation and lowering the risk of built-up edge. Improved chip control combined with a robust cutting edge means fewer interruptions and a cleaner surface finish, which supports higher overall productivity and lower rework rates in serial production. Clear application guidance and safe process margins The insert’s specification signals suitability specifically for stainless steel, which characteristically work-hardens and generates heat during cutting; the WMP32G grade addresses these challenges with a coating and substrate combination that balances adhesion resistance and edge strength. The chipbreaker and grade together allow the insert to be applied where moderate to tougher cutting conditions occur, providing a safety margin for process variability. For customers seeking straightforward selection criteria, the insert is a reliable choice for turning tasks on corrosion‑resistant alloys and similar tough-to-cut steels. For reliable stainless steel turning with Walter Tools’ Tiger‑tec Gold WMP32G inserts, contact Metav Werkzeuge for specific cutting data, availability and expert advice. Technical data Article number: TS16-ER24UNJ-WMP32G-WALTER Product type: indexable turning insert Grade/Sort: WMP32G Series: Tiger‑tec Gold Chipbreaker: ER24UNJ Material group designation: M Application: stainless steel Manufacturer: Walter Tools Facts No dimensional data provided No tolerance class provided No corner radius or thickness specified Special features Coated carbide (Tiger‑tec Gold technology) Optimised for stainless steel machining Stable cutting edge and reliable chip control Medium to robust cutting condition suitability ISO designation: TS16-ER24UNJ WMP32G FAQ What materials is this insert suitable for? The TS16-ER24UNJ WMP32G insert from Walter Tools is optimised for machining stainless steel and performs reliably under medium to robust cutting conditions. How does the Tiger‑tec Gold coating benefit the tool life? The Tiger‑tec Gold coating on the WMP32G grade improves wear resistance and reduces adhesion at elevated temperatures, extending effective tool life during stainless steel turning. What role does the ER24UNJ chipbreaker play? The ER24UNJ chipbreaker promotes controlled chip formation and evacuation, which reduces the risk of built‑up edge and helps maintain surface finish stability when turning stainless steel. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between Metav Werkzeuge and the mentioned manufacturers. The offered item is an original, factory-new product of the specified manufacturer.
TS16-ER27NPT WMP32G Wendeplatten - Walter Tools
Take advantage of a proven combination of high process reliability and extended tool life thanks to the Tiger·tec Gold technology and the WMP32G coated carbide grade. The result is stable chip formation in stainless steel and predictable machining performance — order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. TS16-ER27NPT WMP32G — Indexable turning insert TS16-ER27NPT WMP32G for stainless steel, Tiger·tec Gold, Walter Tools TS16-ER27NPT WMP32G is a coated indexable turning insert engineered for medium to robust machining of stainless steel, combining a specialised chipbreaker with a high-performance coating to improve edge stability and process security. Tiger·tec Gold coating for extended tool life Optimised ER27NPT chip control Suitable for stainless steel machining Coated carbide grade WMP32G for stability Longer tool life where heat and adhesion are a concern The combination of the Tiger·tec Gold coating and the WMP32G grade offers a durable, wear-resistant cutting edge tailored to the demands of stainless steel. Coating technology reduces friction and increases thermal resistance, which in turn lowers the risk of built-up edge and premature flank wear during turning operations. For production environments where repeatability and tool-change intervals matter, this leads to fewer interruptions and a more consistent surface finish. Predictable chip formation and reliable machining stability The ER27NPT chipbreaker geometry is designed to promote controlled chip evacuation under the tougher conditions typical of stainless steels. Stable chip control reduces the likelihood of entanglement, improves heat dissipation at the cutting zone and helps maintain cutting-edge integrity. As a consequence, process security increases and cycle times remain consistent, supporting higher throughput in serial and batch operations. Grade and series engineered for productive results Belonging to the Tiger·tec Gold series, the cutting material is a coated carbide that balances toughness and hardness for mid-to-robust cutting conditions. The WMP32G specification targets adhesion-prone materials and contributes to a reliable cutting edge life. In practice, this means fewer insert indexes per workpiece and predictable tool performance across varying part geometries, which supports efficient planning of machining operations and tool inventories. For professional machining inquiries about the Walter Tools Tiger·tec Gold range or to request material-specific cutting recommendations, contact Metav Werkzeuge for personalised advice and order placement. Technical data Article number: TS16-ER27NPT-WMP32G-WALTER Product: Drehwendeschneidplatte / Indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: ER27NPT ISO designation: TS16-ER27NPT WMP32G Core data Material group: M Application: stainless steel Coating technology: Tiger·tec Gold Special features Coated carbide grade WMP32G Optimised chipbreaker ER27NPT Designed for medium to robust stainless steel machining Stable cutting-edge performance and predictable wear FAQ What materials is this insert intended for? This indexable turning insert is specified for machining stainless steel (material group M) and is optimised for the adhesion and heat characteristics associated with those alloys. What coating and grade does the insert use? The insert uses the Tiger·tec Gold coating combined with the WMP32G coated carbide grade to improve thermal resistance and wear performance in demanding turning operations. Which chipbreaker is fitted and what benefit does it bring? The ER27NPT chipbreaker promotes controlled chip formation and evacuation, improving process security and reducing the risk of chip-related interruptions. Is this insert suitable for medium to heavy turning conditions? Yes, the combination of WMP32G and Tiger·tec Gold is intended for medium to robust cutting conditions typical of stainless steel machining. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names belong to their respective owners. Mention of brand names serves informational purposes only and does not imply any affiliation or endorsement. The offered article is an original, brand-new product from the manufacturer. Are there any doubts about suitability or need for further technical data? Contact information: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930
TS16-ER28UN WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating and a dedicated ER28UN chipbreaker to ensure stable chip formation and reliable performance when machining stainless steels; order the insert via Metav Werkzeuge or contact their consultants for integration advice. TS16-ER28UN WMP22G — Turning indexable insert, Tiger·tec Gold, for stainless steel — Walter Tools The TS16-ER28UN WMP22G is a turning indexable insert engineered for secure chip control and consistent edge life in the machining of stainless steels under medium to robust conditions. Tiger·tec Gold coating for wear resistance Optimised for stainless steel (M) ER28UN chipbreaker for stable chips Consistent edge life under robust conditions Minimise downtime with reliable stainless-steel performance The TS16-ER28UN WMP22G insert is optimised for machining stainless steel (ISO group M), a family of materials known for toughness and heat sensitivity. The combination of a coated carbide substrate and a grade tuned to resist adhesion reduces the tendency for built-up edge and improves surface finish without aggressive parameter changes. For production environments, this translates into fewer tool changes, reduced scrap rates and improved process repeatability. Explaining the technical advantage: coated carbide provides a protective barrier that slows wear mechanisms, while the grade composition supports a stable cutting edge under the higher temperatures typical of stainless-steel turning. Coating and grade for longer edge life and process security The Tiger·tec Gold technology paired with the WMP22G grade focuses on balancing wear resistance and toughness. This balance helps maintain a sharp cutting profile through varying loads and interrupted cuts. The coating assists in lowering friction and thermal load at the cutting zone, thereby extending edge life and keeping surface quality within tighter tolerances. In practice, shops benefit from predictable tool performance and simplified tool management: fewer insert variants are required to cover common stainless-steel turning cases, which supports cost-efficiency and consistent output. Effective chip control that protects tool and workpiece Chip geometry is a decisive factor in turning productivity. The ER28UN chipbreaker on this family of inserts promotes short, controllable chips for typical stainless-steel turning operations, reducing the risk of entanglement and workpiece damage. Stable chip formation eases swarf handling and enables higher feed reliability, supporting automated processes and downstream handling. The result is an improved workflow with fewer interruptions and a better return on machining time — a practical advantage in batch production and continuous manufacturing environments. For precise application advice or to specify the TS16-ER28UN WMP22G for a machining task, contact Metav Werkzeuge — their specialists will recommend compatible toolholders and parameter windows to integrate Walter Tools inserts into existing processes; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS16-ER28UN-WMP22G-WALTER Description: Drehwendeschneidplatte TS16-ER28UN WMP22G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Material designation: M (stainless steel) Grade: WMP22G Chipbreaker: ER28UN Special features Coating: Tiger·tec Gold (coated carbide) Recommended application: medium to robust conditions for stainless steels Plate designation: TS16-ER28UN Suitable for ISO group M materials FAQ Which materials is this insert designed for? The TS16-ER28UN WMP22G insert is designed primarily for stainless steel (ISO group M), offering stable cutting performance in medium to robust machining conditions. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WMP22G grade reduces friction and thermal load at the cutting edge, leading to improved wear resistance and more consistent surface quality during stainless-steel turning. How does the ER28UN chipbreaker affect production? The ER28UN chipbreaker promotes short, controllable chips that ease swarf management and reduce risks to the workpiece and tool, supporting continuous production and automated handling. Is this insert suitable for interrupted cuts or heavy feeds? The WMP22G grade is balanced for toughness and wear resistance, making the insert suitable for more robust conditions and providing process security in cases of variable cutting forces. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanation only; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
TS16-ER28UN WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for reliable machining of rostfreier Stahl, ensuring stable chip formation and extended tool life; order the insert directly via Metav Werkzeuge or consult our experts for application advice. TS16-ER28UN WMP32G turning indexable insert – Tiger·tec Gold, for rostfreier Stahl (Walter Tools) The TS16-ER28UN WMP32G is a coated turning indexable insert designed for productive machining of rostfreier Stahl under medium to robust conditions, offering enhanced edge stability and dependable chip control Tiger·tec Gold coated grade WMP32G For rostfreier Stahl (ISO group M) Stable chip formation in medium–heavy cuts Coated carbide for extended service life Maximum process reliability for rostfreier Stahl The insert combines the Tiger·tec Gold series technology with the WMP32G grade to address the typical challenges of machining rostfreier Stahl: high toughness, adhesion tendency and elevated thermal load. The coated cemented carbide substrate supports stable chip formation and preserves cutting-edge geometry longer under intermittent or continuous turns. As a result, operational consistency improves, rework is reduced and cycle times remain predictable in production environments where component quality is critical. Reduce downtime with longer insert life A focus on coating and grade selection delivers measurable benefits for shop-floor efficiency. The coated carbide construction reduces flank wear and helps maintain surface finish with fewer indexings, which lowers tool-change frequency and total tool cost per part. Process planners will appreciate the predictable wear behaviour that enables more accurate scheduling and inventory control. In short, the insert provides a balance between productivity and longevity that supports higher throughput and lower process variability. Practical application advice for consistent results This insert is optimised for ISO group M applications and performs best when paired with stable clamping and appropriate coolant strategies for rostfreier Stahl. Use the specified chipbreaker to promote controlled evacuation in medium to robust cuts and monitor cutting edge condition to decide on indexing intervals. For mixed-batch production, the consistent behaviour of the grade simplifies parameter selection across similar workpieces, helping maintain surface quality and dimensional repeatability with minimal trial runs. Discuss the TS16-ER28UN WMP32G with Metav Werkzeuge for tailored recommendations and secure the right inserts for rostfreier Stahl machining—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TS16-ER28UN-WMP32G-WALTER Product: Drehwendeschneidplatte Designation: TS16-ER28UN WMP32G Manufacturer: Walter Tools Core data ISO material group: M Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER28UN Special features Coated cemented carbide Suitable for rostfreier Stahl (ISO M) Stable chip formation under medium–heavy conditions Insert designation TS16-ER28UN WMP32G FAQ What materials is this insert suitable for? The TS16-ER28UN WMP32G insert is designed specifically for machining rostfreier Stahl and is classified for ISO group M applications. Which series and grade does the insert belong to? The insert belongs to the Tiger·tec Gold series and uses the WMP32G grade from Walter Tools, optimised for secure chip formation and robust cutting. How does the chipbreaker ER28UN affect performance? The ER28UN chipbreaker promotes controlled chip formation in medium to robust cuts, improving evacuation and reducing the risk of built-up edge when machining rostfreier Stahl. Can this insert reduce total tooling costs? Using the TS16-ER28UN WMP32G can lower tooling costs per part by extending index life and reducing the number of tool changes required for consistent batch runs. Is the insert suitable for mixed production environments? Yes, the combination of Tiger·tec Gold coating and the WMP32G grade provides predictable behaviour across similar rostfreier Stahl workpieces, simplifying parameter selection for mixed batches. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The item offered is an original, brand-new product from the manufacturer.
TS16-ER28UNJ WMP22G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold coating and the WMP22G grade delivers stable edge life and reliable chip formation in demanding stainless steel turning; pairing these properties supports continuous production and reduced tool changes. Order the TS16-ER28UNJ WMP22G indexable insert via Metav Werkzeuge or request further advice from their technical consultants. TS16-ER28UNJ WMP22G indexable turning insert — coated carbide, Tiger‑tec Gold for stainless steel (Walter Tools) TS16-ER28UNJ WMP22G is a coated indexable turning insert designed for machining rostfreier Stahl under medium to robust cutting conditions Tiger‑tec Gold coating for durability Optimised chip control ER28UNJ Engineered for stainless steel machining Coated carbide grade WMP22G Greater process reliability for stainless steel turning The Tiger‑tec Gold series, embodied in this insert, is engineered for rostfreier Stahl where heat generation and built‑up edge are common challenges. The WMP22G coating system combines a wear‑resistant surface with substrate toughness to support a stable cutting edge and predictable performance. This results in fewer unscheduled interruptions and more consistent component tolerances—important where repeatability and surface integrity determine downstream processing and inspection outcomes. Improved chip control to reduce machine downtime The ER28UNJ chipbreaker geometry is optimised to shape and evacuate chips when machining tough, ductile stainless grades. Controlled chip formation minimises entanglement and tool‑holder interference, cutting the frequency of manual interventions. By reducing chip‑related disturbances, cycle times become more stable and tool life can be leveraged more effectively, delivering measurable productivity gains in batch and continuous operations. Durable coated carbide for extended edge life A coated carbide substrate provides a balance between hardness and fracture resistance suited to mixed stainless work. The coating helps resist abrasive and adhesive wear mechanisms typical in rostfreier Stahl machining, while the substrate maintains edge robustness under interrupted cuts. The result is a reduced rate of edge degradation and longer intervals between index changes, which supports overall cost efficiency and more predictable tooling overheads. Easy integration into turning tool systems As an indexable insert, this grade integrates with standard toolholders that accept the TS16‑ER28UNJ form. The insert’s geometry and chipbreaker are selected to match typical process setups for shaft turning, facing and profile operations in stainless steels. For best results, align cutting parameters with material grade and clamping stiffness; technical consultation can provide suggested starting values and tips for optimising coolant use and feed/speed windows. For reliable stainless steel performance and production‑oriented advice, contact Metav Werkzeuge for availability and process recommendations by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: TS16-ER28UNJ-WMP22G-WALTER Product: TS16-ER28UNJ WMP22G indexable turning insert Brand: Walter Tools Series: Tiger‑tec Gold Facts Grade: WMP22G Material group suitability: M (rostfreier Stahl) Chipbreaker: ER28UNJ Special features Coated carbide cutting material Designed for medium to robust stainless steel conditions Stable chip formation and edge performance Optimised for industrial turning applications FAQ Which materials is this insert suitable for? The TS16‑ER28UNJ WMP22G insert is specified for rostfreier Stahl (stainless steel) and is designed to handle the toughness and heat‑sensitivity typical of those alloys. What benefits does the Tiger‑tec Gold coating provide? Tiger‑tec Gold on the WMP22G grade increases wear resistance and supports a stable cutting edge during prolonged stainless steel machining, improving overall process reliability. How does the ER28UNJ chipbreaker affect production? The ER28UNJ chipbreaker promotes controlled chip formation and evacuation, reducing interruptions and the risk of chip entanglement in turning operations. Is this insert compatible with standard toolholders? The TS16‑ER28UNJ form conforms to common indexable insert geometries and is suitable for holders designed for this designation; matching the holder type ensures proper seat and clamping. Can this insert be used for interrupted cuts? Yes; the coated carbide substrate and WMP22G grade provide a balance of toughness and wear resistance that supports interrupted cutting typical in turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (market appearance: Walter Tools) is a leading manufacturer of precision metal‑cutting tools. Brand names and trademarks mentioned are the property of their respective owners and are used for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the named brands. The offered article is original, factory‑new merchandise from the stated manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com