TS16-ER28UNJ WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a carbide grade optimised for rostfreier Stahl, and a secure chipbreaker geometry for consistent production. Order the TS16-ER28UNJ WMP32G directly via Metav Werkzeuge or consult the team for application-specific advice. TS16-ER28UNJ WMP32G — Indexable turning insert for rostfreier Stahl, Tiger·tec Gold (Walter Tools) TS16-ER28UNJ WMP32G is an indexable turning insert designed for medium to robust turning conditions on rostfreier Stahl and similar alloys Tiger·tec Gold coating for extended tool life Optimised for rostfreier Stahl machining Stable cutting edge, reliable chip formation Consistent productivity for rostfreier Stahl components The insert delivers predictable performance when machining rostfreier Stahl, a material group that tends to work-harden and generate heat. The WMP32G grade is a coated carbide developed for such challenges: the coating stabilises the cutting edge and reduces built-up edge, which in turn helps maintain dimensional consistency over longer tool life. For production environments, this means fewer unscheduled tool changes and a more reliable machining cycle time. Coating and grade that extend tool life and process stability The Tiger·tec Gold coating technology is engineered to combine wear resistance with fracture toughness. This results in a balance between edge stability and longevity under medium to robust cutting parameters. The insert’s carbide composition and coating reduce flank wear and enhance resistance to adhesive wear mechanisms common when cutting rostfreier Stahl. The technical advantage is a lower rate of regrind and an increased number of parts produced per insert. Chip control and secure cutting geometry for reliable operation Equipped with the ER28UNJ chipbreaker geometry, the insert promotes stable chip formation and evacuation under conditions typical for rostfreie Stähle. Controlled chips reduce surface damage and the need for secondary cleaning operations, while a stable cutting edge limits vibrations that can compromise surface finish. The result is improved process repeatability and a cleaner shop-floor workflow when paired with appropriate toolholding and cutting data. Integration into the machining process and economic benefit As an indexable turning solution, the insert is straightforward to integrate into standard toolholders and tool systems. The combination of grade, coating and chip control supports higher material removal rates in many cases, shortening cycle times and increasing productivity per shift. For manufacturers prioritising efficiency, the insert’s attributes can translate into measurable improvements in throughput and a reduction in tooling-related downtime. For reliable machining of rostfreier Stahl components, contact Metav Werkzeuge to request the TS16-ER28UNJ WMP32G or to obtain tailored application support from the Metav team Technical data Article number: TS16-ER28UNJ-WMP32G-WALTER Item designation: TS16-ER28UNJ WMP32G Manufacturer: Walter Tools Facts Grade: WMP32G Material group: M Chipbreaker: ER28UNJ Special features Series: Tiger·tec Gold Coating: Tiger·tec Gold (coated carbide) Application: Optimised for rostfreie Stähle Typical use: Medium to robust turning operations FAQ What materials is this insert intended for? The TS16-ER28UNJ WMP32G insert is optimised for rostfreie Stähle (material group M) and designed for medium to robust turning conditions. How does the Tiger·tec Gold coating benefit the process? The Tiger·tec Gold coating on the WMP32G grade increases wear resistance while maintaining edge stability, which extends tool life and improves process reliability. Which chipbreaker is fitted and what advantage does it offer? The ER28UNJ chipbreaker promotes controlled chip formation and evacuation, reducing surface damage and improving repeatability in turning operations. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-ER28W WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WMP32G grade for predictable edge life and secure chip control when machining stainless steel; this increases uptime and reduces tool-change frequency. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. TS16-ER28W WMP32G indexable turning insert (Tiger‑tec Gold, stainless steel) — Walter Tools The TS16-ER28W WMP32G is a coated indexable insert from the Tiger‑tec Gold series, designed for dependable turning of stainless steel under medium to robust cutting conditions. Tiger‑tec Gold coated for wear resistance Optimised for stainless steel machining Stable chip formation under robust conditions Consistent edge life and process security Reliable performance for stainless steel turning The Tiger‑tec Gold series delivers a balanced combination of wear resistance and thermal stability that is particularly suited to stainless steel. This insert supports secure chip formation even when materials tend to stick and generate heat; the consequence is fewer unexpected edge failures and longer intervals between tool changes. By choosing a grade engineered for these conditions, operations gain measurable improvements in process stability and component consistency while maintaining high surface quality. Coating and grade explained for practical use The WMP32G grade denotes a coated carbide solution tuned to the demands of rostfreier Stahl. The coating reduces abrasive wear and improves the resistance to built-up edge, which is a common challenge when machining tough alloys. In practice, this means the insert keeps a sharper cutting geometry for longer and sustains cutting performance across a range of feeds and depths. For engineers and shop managers, that translates into predictable tool life and easier planning of production cycles. Designed for process security and cost-efficient production With an optimised chipbreaker and a geometry intended for medium to robust conditions, this indexable insert enhances process security and repeatability on the shop floor. Stable chips reduce the risk of rework and improve machine uptime; fewer interruptions mean lower unit costs and a smoother production flow. If clarification is needed on compatibility with specific toolholders or recommended cutting data, technical advisers are available to discuss application requirements and to support integration into existing machining setups. For assistance with application-specific recommendations or to secure supply of this Walter Tools Tiger‑tec Gold insert, contact Metav Werkzeuge for expert advice and prompt delivery: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: TS16-ER28W-WMP32G-WALTER Designation: TS16-ER28W WMP32G Manufacturer: Walter Tools Facts Series: Tiger‑tec Gold Grade: WMP32G Chipbreaker: ER28W Applicable workpiece group: M (stainless steels) Materials & features Coated carbide (Tiger‑tec Gold) Suitable for stainless steel machining Designed for medium to robust cutting conditions Optimised for stable chip formation and process security FAQ What materials is this insert designed for? The TS16-ER28W WMP32G insert is designed primarily for stainless steel machining; the WMP32G grade and Tiger‑tec Gold coating support stable cutting in these materials. What benefits does the Tiger‑tec Gold coating provide? Tiger‑tec Gold improves wear resistance and reduces built‑up edge on the Walter Tools insert, resulting in longer edge life and more consistent surface quality. Can this insert handle robust cutting conditions? Yes, the geometry and ER28W chipbreaker are optimised for medium to robust conditions, providing stable chip formation and process security during heavier cuts. Which toolholders are compatible with TS16-ER28W? The insert fits holders and tool systems that accept the TS16‑ER28W designation; consult tooling specifications or Metav Werkzeuge for holder compatibility. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not imply any affiliation with our company. Walter Tools is referred to where relevant. Manufacturer: Walter Tools; head office: Tübingen, Germany. Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
TS16-ER3.0ISO WMP22G Wendeplatten - Walter Tools
The Tiger‑tec Gold grade WMP22G combines long tool life and stable chip formation with an ER3.0ISO chipbreaker optimised for machining stainless steels; order the insert directly via Metav Werkzeuge or contact their consultants for application support. TS16-ER3.0ISO WMP22G turning indexable insert — Walter Tools (Tiger‑tec Gold) The TS16-ER3.0ISO WMP22G is a turning indexable insert designed for medium to robust machining of stainless steels, offering a coated carbide grade for secure chip control and repeatable performance. Tiger‑tec Gold coating for long tool life Optimised for stainless steel (ISO M) ER3.0ISO chipbreaker for stable chips Consistent edge stability and finish Reliable performance for stainless steel turning The WMP22G grade, built on Tiger‑tec Gold technology, is a coated cemented carbide solution developed for the specific demands of stainless steels. These materials are prone to work hardening and built‑up edge; the combination of coating and substrate ensures controlled heat resistance and improved wear behaviour. As a result, machining cycles are more predictable and tool change intervals can be planned reliably, supporting continuous production and process stability. Consistent chip control and improved process security The integrated ER3.0ISO chipbreaker is engineered to promote stable chip formation even under medium to robust cutting conditions. Stable chips reduce interruptions and the risk of surface damage, while the insert geometry supports a steady metal flow across the cutting edge. This leads to a measurable improvement in surface finish and reduces the likelihood of rework, contributing to overall process security on serial turning operations. Extended tool life with reproducible edge performance A core benefit of the Tiger‑tec Gold family is enhanced wear resistance and edge stability, which together extend usable tool life and keep component tolerances consistent across runs. The coated carbide composition minimises flank wear and delays crater development, translating into fewer tool changes and higher net output. The predictable degradation behaviour supports cost calculations and helps to optimise batch production cycles for increased high productivity. Easy integration into existing turning toolchains As an indexable insert, the TS16‑ER3.0ISO WMP22G is suitable for standard turning toolholders that accept the TS16 form factor and the specified chipbreaker. It is intended for typical applications in machining shafts, rings and rotational components made from stainless steels under medium to robust conditions. For precise cutting data and holder compatibility, coordination with the supplier is recommended to match insert geometry, coolant strategy and cutting parameters to the specific application. For tailored recommendations on Walter Tools Tiger‑tec Gold inserts and fast supply, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for expert advice and availability Technical data SKU: TS16-ER3.0ISO-WMP22G-WALTER Article: TS16-ER3.0ISO WMP22G Product type: turning indexable insert Series: Tiger‑tec Gold Grade: WMP22G Facts ISO material group: M (stainless steels) Chipbreaker: ER3.0ISO Material of grade: coated cemented carbide Intended application: medium to robust cutting conditions Special features Coating technology: Tiger‑tec Gold Designed for secure chip control and reduced built‑up edge Optimised for repeatable edge stability and surface finish Suitable for serial turning of shafts and rotational components FAQ What materials is this insert best suited for? The TS16-ER3.0ISO WMP22G insert is intended primarily for stainless steels (ISO group M) and performs well under medium to robust cutting conditions. What does the WMP22G grade provide? The WMP22G grade, part of the Tiger‑tec Gold family, offers a coated carbide combination that improves wear resistance and edge stability for reliable, repeatable machining. Which chipbreaker is fitted and what is its benefit? The insert features the ER3.0ISO chipbreaker, which promotes stable chip formation and helps maintain consistent surface quality during turning operations. Is the insert compatible with standard TS16 holders? Yes, the TS16 form factor is designed for standard turning toolholders that accept TS16 inserts; holder matching and cutting data should be confirmed for optimal results. How does this insert affect productivity? By reducing unplanned interruptions and extending tool life through improved edge stability, the insert supports high productivity and more predictable production cycles. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between Metav Werkzeuge and the named brands. The offered article is an original, factory‑new product from the manufacturer Walter Tools.
TS16-ER3.0ISO WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and an ER3.0ISO chipbreaker for dependable chip control and extended tool life; order or enquire via Metav Werkzeuge for reliable supply and application advice. TS16-ER3.0ISO WMP32G Drehwendeschneidplatte — Tiger·tec Gold coated insert for stainless steel turning | Walter Tools The TS16-ER3.0ISO WMP32G is a coated carbide indexable insert designed for turning operations on stainless steels under medium to robust conditions. Tiger·tec Gold coating for extended tool life Optimised ER3.0ISO chipbreaker for secure chips Designed for stainless steels (ISO group M) WMP32G grade for medium to robust cutting Stable chip control for productive stainless steel turning The combination of the ER3.0ISO chipbreaker and the WMP32G grade provides consistent chip formation when machining stainless steels, a group prone to work-hardening and high thermal input. The chip geometry reduces stringing and prevents chip entanglement at typical turning feeds, supporting uninterrupted production cycles. As a coated carbide insert from the Tiger·tec Gold series, it balances wear resistance and edge stability to maintain cutting performance over longer tool life, which in turn reduces downtime for grade changes and regrinding. Longer tool life and process security through advanced coating The Tiger·tec Gold coating enhances thermal resilience and adhesion control on the cutting edge, slowing flank wear during demanding stainless steel cuts. This results in fewer insert changes and more predictable tool lifetime, supporting cost-effective machining strategies. The WMP32G specification denotes a coated cemented carbide optimised for mid-to-heavy conditions, ensuring a robust cutting edge that keeps dimensional accuracy and surface finish consistent over batch runs. Such predictability improves process planning and reduces scrap rates in turning applications. Integrating the insert into production and selecting the right setup As an indexable insert specified for ISO group M materials, the item suits a range of turning tasks from roughing to semi-finishing where stainless steel workpieces require controlled heat and chip discharge. Selection of appropriate toolholder geometry and cutting parameters is crucial: combine the TS16-ER3.0ISO WMP32G with a rigid holder and adequate coolant strategy to exploit the coating and chipbreaker advantages. If further technical parameters are required for machine programming or cycle planning, Metav Werkzeuge can supply additional data and machining recommendations to match line speed and part tolerances. Practical benefit: reduced process variability and dependable results Deploying a dedicated grade for stainless steels reduces the risk of built-up edge and unpredictable wear, translating into fewer interruptions and more repeatable component quality. The mix of cutting-edge coating technology and a purpose-designed chipbreaker supports both production efficiency and operator confidence. For customers seeking predictable performance, this insert offers a pragmatic balance between wear resistance and edge robustness that suits many job-shop and production-line environments. Contact Metav Werkzeuge for detailed application advice and stock availability of the Walter Tools TS16-ER3.0ISO WMP32G insert Technical data Article number: TS16-ER3.0ISO-WMP32G-WALTER Designation: TS16-ER3.0ISO WMP32G Manufacturer: Walter Tools Facts Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: ER3.0ISO Material group: M (stainless steels) Special features Coated cemented carbide grade WMP32G Optimised for rostfreie Stähle (stainless steels) Stable chip formation and secure chip control Designed for medium to robust turning conditions FAQ What materials is this insert suitable for? The TS16-ER3.0ISO WMP32G insert is designed primarily for stainless steels (ISO group M), where its grade and chipbreaker promote secure chip formation during turning. Is the insert coated and what is the benefit? Yes, the insert uses the Tiger·tec Gold coating; this improves thermal resistance and wear behaviour, which extends tool life and stabilises cutting results when turning demanding materials. What does the ER3.0ISO chipbreaker do? The ER3.0ISO chipbreaker is configured to produce manageable chips on stainless steels, reducing stringing and facilitating safe removal from the cutting zone to support continuous machining. How does WMP32G compare to other grades? The WMP32G grade is a Walter Tools coated carbide specifically balanced for medium to robust stainless-steel applications, favouring edge stability and repeatable performance under tougher conditions. Can this insert be used for finishing passes? The insert is suitable for a range of turning operations; for fine finishing, pairing the insert with optimised feeds, speeds and a precise holder will help achieve the required surface quality with consistent results. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
TS16-ER3.0ISO-F5 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for reliable machining of stainless steels; the insert’s ER3.0ISO-F5 chipbreaker promotes stable chip formation and extended tool life. Order the insert directly via Metav Werkzeuge or contact the sales team for tailored recommendations. TS16-ER3.0ISO-F5 WMP32G turning insert – Tiger·tec Gold for stainless steel | Walter Tools The TS16-ER3.0ISO-F5 WMP32G is a precision indexable turning insert engineered for medium to robust machining of stainless steel, combining a Tiger·tec Gold coating with a chipformer optimised for secure chip control Tiger·tec Gold coating for long tool life WMP32G grade for stainless steel machining ER3.0ISO-F5 chipformer for stable chip control Increased productivity through targeted coating technology The combination of a Tiger·tec Gold coating and a wear-resistant substrate delivers a measurable improvement in process stability when machining stainless steel. The specialised coating reduces built-up edge and improves thermal resistance, which in turn extends the tool life and reduces downtime. This results in more consistent cycle times and fewer insert changes, supporting higher throughput in serial production environments. Predictable chips and safer turning operations Built around the ER3.0ISO-F5 chipbreaker, the insert ensures stable chip formation even under the demanding behaviour of stainless materials. The chipformer geometry promotes consistent swarf removal and lowers the risk of entanglement, so machining can proceed without frequent interruptions. This translates to fewer surface defects and more reliable adherence to dimensional tolerances on critical turned components. Material-focused grade and application scope The WMP32G grade is a coated carbide formulated for the specific challenges of austenitic and other stainless alloys. Its balance of toughness and hardness supports medium to heavy depth of cut operations while maintaining a sharp cutting edge. For customers requiring predictable performance, this insert provides a practical compromise between edge robustness and wear resistance, reducing the need for frequent index changes during batch runs. Robust brand engineering and consistent results Manufactured by Walter Tools, the insert is part of the Tiger·tec Gold family and benefits from validated production processes and quality control. The result is a repeatable cutting performance and integration into established tool schedules. For workshops seeking dependable inserts for stainless applications, this component offers a clear technical proposition: improved edge stability, predictable chips and supportive coating technology for extended service life. Contact Metav Werkzeuge for availability and tailored cutting data for Walter Tools Tiger·tec Gold inserts: email info@metav-werkzeuge.com or call +49 2822 7131930 for application advice and immediate order handling Technical Data Article number: TS16-ER3.0ISO-F5-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-ER3.0ISO-F5 WMP32G Walter Tools Series: Tiger-tec Gold Grade: WMP32G Chipformer: ER3.0ISO-F5 Facts Corner radius: 3.0 mm Insert size designation: TS16 Special features Coating: Tiger·tec Gold Material: coated carbide Suitable for: stainless steel Product type: indexable turning insert Manufacturer: Walter Tools FAQ What materials is this insert designed for? The TS16-ER3.0ISO-F5 WMP32G is engineered primarily for stainless steel machining and performs well under medium to robust cutting conditions. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WMP32G grade improves thermal resistance and reduces built-up edge, extending the service life of the insert and stabilising machining operations. What is the role of the ER3.0ISO-F5 chipformer? The ER3.0ISO-F5 chipbreaker promotes predictable chip control, reducing entanglement and interruptions during turning of stainless materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TS16-ER3.0ISO-M5 WMP32G Wendeplatten - Walter Tools
TS16-ER3.0ISO-M5 WMP32G Drehwendeschneidplatte von Walter Tools Die TS16-ER3.0ISO-M5 WMP32G ist eine hochproduktive Drehwendeschneidplatte für die sichere Bearbeitung von rostfreiem Stahl in mittleren bis robusten Einsatzbedingungen. Tiger‑tec Gold Beschichtung für stabile Schneidkante Speziell für rostfreie Stahlwerkstoffe optimiert ER3.0ISO-M5 Spanbrecher für sichere Spanbildung Zuverlässige Standzeit und konstante Bearbeitung Kompatibel mit gängigen Drehwerkzeugen und Haltern Beschichtung und Schneidstoff für sichere Spanbildung Die WMP32G gehört zur Tiger·tec Gold Familie und ist als beschichtetes Hartmetall ausgelegt, um die typischen Herausforderungen bei der Bearbeitung von rostfreien Stählen zu meistern. Die Beschichtung reduziert das Aufbauschneiden und stabilisiert die Schneidkante, sodass sich eine gleichmäßige Spanbildung einstellt und Nacharbeit reduziert wird. Anwender profitieren von einer beständigen Werkstückoberfläche und planbaren Standzeiten. Prozesssicherheit und Produktivitätsvorteile Der integrierte ER3.0ISO-M5 Spanbrecher sorgt für kontrollierten Spanbruch und verringert Maschinenstillstände durch Spanprobleme. Durch die Kombination aus Schneidstoff und Spanformer ergeben sich konstante Schnittergebnisse sowie eine höhere Ausbringung in der Serienfertigung. Für Fertigungsleiter und Betriebsingenieure bedeutet das messbare Prozesssicherheit und weniger Ausschuss. Zielgruppenorientierte Anwendung und wirtschaftlicher Nutzen Die Wendeschneidplatte richtet sich an Lohnfertiger, Maschinenbauer und Großserienfertiger, die rostfreie Stähle prozesssicher und wirtschaftlich bearbeiten wollen. Die robuste Auslegung der Sorte macht die Platte zum Allrounder für mittlere bis anspruchsvolle Schnittbedingungen, wodurch Werkzeugwechsel seltener und Produktionskosten vergleichsweise niedriger ausfallen. Setzen Sie auf die WMP32G Tiger‑tec Gold Sorte für zuverlässige Bearbeitungsqualität bei rostfreiem Stahl und fordern Sie technische Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 an Produktmerkmale Artikelnummer: TS16-ER3.0ISO-M5-WMP32G-WALTER Marke: Walter Tools Produktart: Drehwendeschneidplatte Bezeichnung: TS16-ER3.0ISO-M5 Sorte: WMP32G Serie: Tiger-tec Gold Spanbrecher: ER3.0ISO-M5 Zahlen Besonderheiten Schneidstoffklasse: beschichtetes Hartmetall Geeignet für: rostfreie Stähle (ISO‑Gruppe M) Materialcode: M Sortenbeschreibung: WMP32G ist eine Walter‑Schneidstoffsorte Einsatzbedingungen: mittlere bis robuste Einsatzbedingungen FAQ Für welche Werkstoffe ist die Platte geeignet? Die TS16-ER3.0ISO-M5 WMP32G von Walter Tools ist speziell für rostfreie Stähle (ISO‑Gruppe M) ausgelegt und unterstützt sichere Spanbildung unter mittleren bis robusten Bedingungen. Welchen Nutzen bringt die Tiger·tec Gold Beschichtung? Die Tiger·tec Gold Beschichtung der WMP32G verbessert die Schneidkantenstabilität und reduziert das Aufbauschneiden, was zu konstanteren Oberflächen und längeren Standzeiten führt. Wie unterstützt der ER3.0ISO-M5 Spanbrecher die Fertigung? Der ER3.0ISO-M5 Spanbrecher formt Späne kontrolliert, verhindert Spanverwicklungen und trägt so zu weniger Maschinenstillstand und höherer Ausbringung bei. Für welche Fertigungsumgebungen ist die Wendeschneidplatte gedacht? Die TS16-ER3.0ISO-M5 WMP32G eignet sich für Lohnfertigung, Serienproduktion und mechanische Werkstätten, die rostfreie Stähle zuverlässig und effizient zerspanen müssen. Welche Hauptvorteile bietet die WMP32G gegenüber Standardsorten? Die WMP32G kombiniert beschichtetes Hartmetall mit einer prozesssicheren Beschichtungstechnologie, was in stabiler Schneidkante, verbesserter Spanformung und planbaren Standzeiten resultiert. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-ER3.0TR WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP32G grade and the ER3.0TR chipformer for reliable chip control and consistent cutting-edge stability when machining rostfreien Stahl; order directly via Metav Werkzeuge or consult the technical team for application support. TS16-ER3.0TR WMP32G Turning indexable insert — Tiger·tec Gold, for rostfreien Stahl, Walter Tools The TS16-ER3.0TR WMP32G is a turning indexable insert designed to provide stable cutting edges and secure chip formation for medium to robust machining conditions on rostfreien Stahl. Tiger·tec Gold coating technology WMP32G grade for rostfreien Stahl applications ER3.0TR chipformer for stable chip control Walter Tools original turning insert Optimised chip control for demanding rostfreien Stahl work The TS16-ER3.0TR WMP32G combines the Tiger·tec Gold coating with a grade engineered for rostfreien Stahl to promote secure chip formation and resist edge build-up. In practice, the ER3.0TR chipformer directs and breaks chips reliably under medium to robust cutting conditions, reducing interruptions and improving process stability. The result is more consistent cycle times and less manual intervention during long production runs. Consistent cutting-edge life and process reliability Coated carbide in the WMP32G variety provides a balance between toughness and wear resistance, supporting a stable cutting edge in materials that tend to work-harden. This balance helps to maintain dimensional accuracy over repeated indexings, which contributes to fewer tool changes and a steadier production flow. The combination of coating and grade supports repeatable performance across batches, helping to reduce scrap and rework. Practical guidance for machining rostfreien Stahl Selection of this insert fits turning operations where control of built-up edge and heat generation is critical. The geometry and chipbreaker work together to evacuate chips and moderate temperatures; the WMP32G grade is recommended where material toughness and poor thermal conductivity of rostfreien Stahl can challenge surface finish and tool life. For best results, match the insert with an appropriate holder and cutting parameters aligned to the workpiece alloy and operation type. Integration into the production environment and supply The insert is supplied as a single indexed cutting edge product within Walter Tools' Tiger·tec Gold family, facilitating straightforward replacement practices in existing tooling systems. Inventory planning benefits from the known series designation and grade coding, which simplifies ordering and ensures interchangeability. Procuring through Metav Werkzeuge ensures access to technical advice and consistent supply lines for production continuity. Contact Metav Werkzeuge for tailored application advice or to secure supply of the TS16-ER3.0TR WMP32G; email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: TS16-ER3.0TR-WMP32G-WALTER Product: Turning indexable insert (Drehwendeschneidplatte) Designation: TS16-ER3.0TR WMP32G Grade: WMP32G Brand: Walter Tools Facts Series: Tiger·tec Gold Chipbreaker: ER3.0TR Material group: M Suitable for: rostfreien Stahl Special features Coating: Tiger·tec Gold (coated carbide) Sortenbeschreibung: coated carbide grade optimised for rostfreien Stähle Intended use: medium to robust machining conditions FAQ What materials is this insert intended for? The TS16-ER3.0TR WMP32G is intended primarily for rostfreien Stahl and is specified for medium to robust operating conditions. What is the main benefit of the Tiger·tec Gold coating? The Tiger·tec Gold coating on the WMP32G grade increases wear resistance while retaining toughness, supporting stable cutting edges during machining of rostfreien Stahl. How does the ER3.0TR chipformer affect performance? The ER3.0TR chipformer promotes consistent chip breaking and evacuation, reducing the risk of built-up edge and interruptions in turning operations. Is this an original Walter Tools product? The insert is an original Walter Tools product, supplied under the TS16-ER3.0TR WMP32G designation. Hersteller: Walter Tools; Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any affiliation between our company and the named manufacturers. The offered item is original factory-new merchandise from Walter Tools.
TS16-ER32UN WMP32G Wendeplatten - Walter Tools
Take advantage of process reliability, stable chip control and the Tiger‑tec Gold coating for consistent turning of rostfreier Stahl; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TS16-ER32UN WMP32G indexable turning insert – Tiger‑tec Gold for rostfreier Stahl (Walter Tools) TS16-ER32UN WMP32G is an indexable turning insert engineered for medium to robust machining of rostfreier Stahl, optimised for secure chip formation and long tool life Tiger‑tec Gold coating for durability WMP32G grade for rostfreier Stahl machining ER32UN chipbreaker for predictable chips Designed for medium to robust cutting conditions Increased process reliability when machining rostfreier Stahl The combination of the Tiger‑tec Gold coating and the WMP32G grade delivers improved resistance to adhesion and flank wear when working with rostfreier Stahl. The coating technology reduces heat build‑up at the cutting edge, which in turn supports stable chip control and a lower risk of built‑up edge formation. For production environments, this means fewer unscheduled tool changes and more predictable cycles per tool, raising overall efficiency and process security. Better surface finish with reduced rework A consistent cutting geometry and a chipbreaker designed as ER32UN help to produce a regular chip form even under tougher conditions, which contributes directly to a more consistent surface finish on the machined component. Stable chips reduce vibration and thermal fluctuation at the cutting zone, decreasing the need for downstream rework. The result is improved part quality and a smaller share of non‑conforming parts, which supports cost‑effective manufacturing. Easy integration and predictable tool life The insert fits standard indexable turning toolholders that accept the TS16 designation and offers straightforward indexing for multiple cutting edges. Thanks to the combination of grade and coating, the component gives longer tool life under the specified conditions, allowing planning of tool replacement intervals and reducing inventory uncertainty. The clear ISO group assignment supports correct tool selection for rostfreier Stahl applications and simplifies process documentation. Contact Metav Werkzeuge for tailored advice on tools and machining parameters for Tiger‑tec Gold inserts and to arrange a supply of TS16‑ER32UN WMP32G; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TS16-ER32UN-WMP32G-WALTER Product type: Indexable turning insert Designation: TS16-ER32UN WMP32G Series: Tiger‑tec Gold Manufacturer: Walter Tools Facts ISO group: M Chipbreaker: ER32UN Suitable material: rostfreier Stahl Special features Coating: Tiger‑tec Gold (coated carbide) Grade: WMP32G Application: medium to robust cutting conditions for rostfreier Stahl Benefit: stable chip formation and reliable cutting edge performance FAQ What material is this insert designed for? The TS16‑ER32UN WMP32G insert is specified for rostfreier Stahl (ISO group M) and its grade and coating are optimised for the toughness and heat characteristics of these steels. What does ER32UN indicate? ER32UN denotes the insert’s chipbreaker geometry, engineered to produce predictable chips and improve surface finish during turning operations with the WMP32G grade. How does the Tiger‑tec Gold coating help in production? The Tiger‑tec Gold coating reduces thermal stress and adhesion at the cutting edge, which supports longer tool life and more consistent machining performance when turning rostfreier Stahl. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory‑new goods of the manufacturer.
TS16-ER32UNJ WMP32G WMP32G Wendeplatten - Walter Tools
Combine the high-performance Tiger·tec Gold coating with the WMP32G grade for reliable chip control and long tool life in stainless steel machining; order directly via Metav Werkzeuge or contact the consultants for specification support. TS16-ER32UNJ WMP32G indexable turning insert — Tiger·tec Gold for stainless steel | Walter Tools TS16-ER32UNJ WMP32G is an indexable turning insert designed to deliver secure chip formation and consistent cutting-edge stability in medium to robust machining of stainless steel Tiger·tec Gold coating for long tool life Optimised chip control for stainless steel Robust, stable cutting edge performance Suitable for medium to heavy cutting Reliable machining where stainless steels cause work hardening The TS16-ER32UNJ WMP32G insert combines a coated carbide substrate with the Tiger·tec Gold family to address the specific challenges of machining stainless steel. These alloys tend to be tough and generate high temperatures at the cutting zone, which increases the risk of built-up edge and premature wear. The graded WMP32G coating supports stable chip formation and reduces adhesion, which in turn improves process security and maintains surface quality over longer tool life. As a result, the insert helps sustain productivity in continuous and batch production environments. Coating and substrate interaction explained for predictable performance The insert’s performance is driven by the interplay between the base carbide and the multilayer Tiger·tec Gold coating. This combination enhances thermal stability and wear resistance without sacrificing cutting-edge integrity. The included ER32UNJ chipbreaker geometry is engineered to control chips from stainless steels, promoting consistent evacuation and reducing the likelihood of workpiece damage. For engineers and process planners, the pragmatic outcome is fewer interruptions, steadier cycle times and more reproducible component finish in demanding material groups. Practical benefits for workshop efficiency and process reliability In practice, the TS16-ER32UNJ WMP32G insert delivers measurable advantages: improved process security, repeatable surface quality and a robust cutting edge that tolerates medium to heavy cutting conditions. The coating-grade pairing reduces the frequency of insert changes and supports predictable wear behaviour, which aids in planning tool-change intervals and optimising throughput. For production managers, the result is a more stable machining window and better utilisation of machine time, particularly in stainless steel turning operations. Contact Metav Werkzeuge to specify the optimal Walter Tools TS16-ER32UNJ WMP32G insert for stainless steel applications or request tailored process advice via info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: TS16-ER32UNJ-WMP32G-WALTER Article: TS16-ER32UNJ WMP32G Product type: indexable turning insert Brand: Walter Tools Core data Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER32UNJ Material group: M (stainless steel) Suitable for: stainless steel (ISO M) Special features Coating: Tiger·tec Gold (coated carbide) Sort: WMP32G Application: medium to heavy machining of stainless steel Designation: TS16-ER32UNJ FAQ What materials is this insert intended for? The TS16-ER32UNJ WMP32G insert is designed primarily for stainless steel (ISO M) machining and performs well under medium to robust cutting conditions. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating improves thermal resistance and wear behaviour, which helps maintain cutting-edge integrity and delivers more consistent cycle times in stainless steel turning. Which chipbreaker is fitted and why does it matter? The ER32UNJ chipbreaker is specified to promote controlled chip formation for stainless steels, aiding evacuation and reducing the risk of surface damage. Is this insert suitable for heavy-duty turning operations? Yes, the combination of the WMP32G grade and Tiger·tec Gold series is intended for medium to heavy machining where stability and process reliability are required. Can this insert reduce downtime and tool-change frequency? The coating and robust grade contribute to improved tool life and predictable wear, supporting longer intervals between changes and fewer production interruptions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only and indicate no affiliation between Metav Werkzeuge and the named companies. The item offered is original, brand-new merchandise from the manufacturer Walter Tools.
TS16-ER40UN WMP32G Wendeplatten - Walter Tools
Combine the Tiger·tec Gold coating with the WMP32G carbide grade to achieve consistent performance and stable chip formation when machining stainless steel; order via Metav Werkzeuge or consult the technical team for application support. TS16-ER40UN WMP32G – Indexable turning insert, Tiger·tec Gold coating (for stainless steel) by Walter Tools The TS16-ER40UN WMP32G is an indexable turning insert engineered for secure chip control and robust cutting performance in stainless steel applications. Tiger·tec Gold coating for improved wear resistance Optimised chip control for stainless steel (M) Coated carbide grade WMP32G for stable cutting edges Reliable performance under medium to robust conditions Consistent cutting performance with controlled chip formation The insert delivers stable cutting edges and consistent behaviour in demanding stainless steel machining. Thanks to the combination of grade and geometry, chip control is improved and the risk of built-up edge is reduced, which helps maintain process reliability. This results in fewer interruptions and a more uniform workpiece finish. The design is intended for turning operations where secure chip evacuation and predictable tool life are priorities for production workflows. Coating and grade explained for practical benefits The Tiger·tec Gold technology denotes a multi-layer coating applied to a coated carbide substrate, optimised for tough-to-machine materials. The WMP32G grade is tuned for the ISO group M (stainless steels), supporting a stable edge under medium to robust conditions. Coatings reduce flank wear and improve thermal resistance; the carbide core sustains mechanical strength. For operators with limited coating expertise, the combination means fewer tool changes and lower scrap rates owing to prolonged, more predictable performance. Process reliability that supports productivity With an emphasis on repeatable results, the insert contributes to steady cycle times and reduced process variance. The integrated chipbreaker ER40UN promotes short, controllable chips in turning, lowering the risk of workpiece surface damage and machine downtime. Where stability and reproducibility are demanded, the tool supports higher effective productivity by enabling longer intervals between inspections and tool swaps. The overall effect is a smoother manufacturing flow and improved output quality. Practical application and compatibility in workshop setups The insert is suitable for conventional indexable turning toolholders that accept the TS16 series geometry; the chipbreaker ER40UN is particularly effective in stainless steel contexts. Selection of cutting data should follow material and machine capability; surface finish and dimensional stability are supported when recommended feeds and depths are observed. For integration into existing tool systems, the insert is designed to deliver immediate operational benefits without complex adjustments to tooling strategy. For machining stainless steel with enhanced wear resistance and dependable chip control, contact Metav Werkzeuge for ordering and tailored application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TS16-ER40UN-WMP32G-WALTER Name: Drehwendeschneidplatte / indexable turning insert Manufacturer: Walter Tools Type: TS16-ER40UN WMP32G Facts Material group: M Series: Tiger·tec Gold Grade / Sort: WMP32G Chipbreaker: ER40UN Special features Coating: Tiger·tec Gold (coated carbide) Application: stainless steel (ISO group M) Performance: medium to robust cutting conditions FAQ What materials is this insert intended for? The TS16-ER40UN WMP32G insert by Walter Tools is designed primarily for stainless steel (ISO group M) and performs well under medium to robust cutting conditions. How does the Tiger·tec Gold coating benefit tool life? The Tiger·tec Gold coating on the WMP32G grade reduces flank wear and increases thermal resistance, which extends tool life and supports consistent machining performance. What is the role of the ER40UN chipbreaker? The ER40UN chipbreaker is shaped to produce short, controllable chips in stainless steel turning, improving chip evacuation and protecting the workpiece surface. Is the insert compatible with standard TS16 toolholders? Yes, the geometry corresponds to the TS16 series and is suitable for toolholders that accept this indexable insert format. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, brand-new product from the manufacturer Walter Tools.
TS16-IL-A55 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WMP32G grade and an IL‑A55 chipbreaker for stable machining of stainless steels; order the insert directly via Metav Werkzeuge or consult the Metav team for application advice and availability. TS16-IL-A55 WMP32G indexable turning insert — Tiger‑tec Gold, IL‑A55 chipbreaker (Walter Tools) The TS16-IL-A55 WMP32G is an indexable turning insert designed for robust and reliable machining of stainless steel in medium to heavy-duty turning operations. Tiger‑tec Gold coating for enhanced wear resistance IL‑A55 chipbreaker for reliable chip control Grade WMP32G optimised for stainless steel Walter Tools engineering for consistent tool life Consistent performance when machining stainless steel The combination of Tiger‑tec Gold technology and the WMP32G grade produces a coated cemented‑carbide insert tailored to the demands of stainless steel (ISO group M). The coating reduces flank and crater wear under elevated temperatures, while the substrate provides the required toughness for the material’s tendency to work‑harden. This results in predictable tool life and fewer unplanned tool changes, supporting continuous production and improved process reliability. Improved chip control and edge stability for dependable cycles The IL‑A55 chipbreaker is engineered to promote short, controllable chips when turning ductile and heat‑sensitive stainless steels, reducing the risk of built‑up edge and entanglement. Stable chip formation minimises surface irregularities and lowers secondary machining effort. By combining chipbreaker geometry with a coated cutting grade, the insert supports stable cutting edges even in interrupted cuts or tougher feed conditions, which enhances overall machining efficiency. Production advantages and practical tool management Specification and repeatability are central to efficient workshop routines: the insert’s grade and chipbreaker enable reproducible results across batches, helping to reduce scrap rates and inspection overhead. The product’s design aligns with common turning systems, making tool assortment and inventory management more straightforward. With emphasis on wear resistance and consistent edge behaviour, the insert contributes to higher uptime and better cost‑per‑component metrics in serial production. For application support or to arrange supply of this Walter Tools insert, contact Metav Werkzeuge for tailored advice and delivery information at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TS16-IL-A55-WMP32G-WALTER Item: Drehwendeschneidplatte TS16-IL-A55 WMP32G Walter Tools Product type: Indexable turning insert Designation: TS16-IL-A55 WMP32G Series: Tiger‑tec Gold Grade: WMP32G Chipbreaker: IL‑A55 Manufacturer: Walter Tools UID: TS16-IL-A55-WMP32G-WALTER Core data Application group: M (stainless steel) Material group: coated cemented carbide Intended use: medium to robust cutting conditions Special features Coating technology: Tiger‑tec Gold Optimised for stable chip formation in stainless steel Designed for reliable edge stability and consistent tool life Suitable for production environments requiring reproducible results FAQ What materials is this insert suitable for? The TS16-IL-A55 WMP32G insert is specified for stainless steel (ISO group M); the WMP32G grade and Tiger‑tec Gold coating are matched to the toughness and heat characteristics of these alloys. How does the IL‑A55 chipbreaker help the process? The IL‑A55 chipbreaker promotes short, controlled chips and supports stable chip evacuation, which reduces built‑up edge and improves surface consistency during turning of stainless steels. Is the WMP32G grade a coated or uncoated substrate? WMP32G is a coated cemented‑carbide grade developed within the Tiger‑tec Gold family to combine wear resistance with sufficient toughness for ductile, heat‑generating materials. What production benefits can be expected from this insert? Expect enhanced tool life consistency, fewer unscheduled tool changes and reduced rework due to the balanced combination of coating and chipbreaker geometry, supporting efficient serial machining. Can this insert handle intermittent cuts and varying feeds? The insert’s grade and chipbreaker geometry are intended to maintain edge stability under varied feed conditions, making it suitable for many practical turning scenarios encountered in production. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanation and identification. There is no affiliation between Metav Werkzeuge and the mentioned brands. The offered item is original, factory‑new merchandise of Walter Tools.
TS16-IL-A60 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold performance, a dedicated IL‑A60 chipbreaker and the WMP32G grade for reliable machining of rostfreiem Stahl; the result is stable chip formation and consistent cutting-edge life under medium to robust conditions. Order the TS16-IL-A60 WMP32G insert directly via Metav Werkzeuge or ask our consultants if needed. TS16-IL-A60 WMP32G — Indexable turning insert with Tiger·tec Gold for rostfreiem Stahl (Walter Tools) The TS16-IL-A60 WMP32G is an indexable turning insert engineered to deliver secure chip control and durable cutting performance when machining rostfreiem Stahl under medium to robust conditions Tiger·tec Gold coated WMP32G grade Optimised IL‑A60 chipbreaker design For rostfreiem Stahl and tough materials Reliable edge life in medium to robust conditions Greater process reliability with modern coating technology The combination of the WMP32G grade and the Tiger·tec Gold coating provides enhanced resistance to wear and thermal influence during turning of rostfreiem Stahl. As a coated carbide product, the insert supports stable chip formation and reduces the risk of built‑up edge, which commonly affects toughness-prone stainless alloys. This technical pairing translates into fewer interruptions and more predictable component quality, particularly in series production where repeatability matters. Controlled chips and improved surface quality under load The IL‑A60 chipbreaker is designed specifically to manage chip flow in the demanding behaviour of rostfreiem Stahl, promoting short, controllable chips and minimising surface damage. The insert geometry delivers a balanced contact area that maintains a robust cutting edge while enabling consistent surface finish in medium to robust machining scenarios. For shop floors focusing on productivity, this means longer intervals between index changes and a steadier machining cycle time. Practical application benefits and selection guidance Selected for its suitability to the ISO M group, this indexable insert is appropriate where rostfreiem Stahl requires secure material removal without excessive flank wear. Integration into compatible toolholders offers straightforward toolset-up and repeatable clamping accuracy. When paired with correct feeds and cooling strategies, the insert supports dependable productivity and reduced scrap rates. For specific machining parameters, matching holder geometry and a stable machine setup are essential to exploit the insert’s full potential. For reliable machining of rostfreiem Stahl with Tiger·tec Gold performance and proven IL‑A60 chip control, contact Metav Werkzeuge for tailored technical advice and availability of Walter Tools inserts via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: TS16-IL-A60-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-IL-A60 WMP32G Walter Tools Product type: Drehwendeschneidplatte (indexable turning insert) Manufacturer: Walter Tools Series/designation: TS16-IL-A60 WMP32G Core technical data Material group: M Suitable for rostfreiem Stahl: Yes Grade: WMP32G Chipbreaker: IL‑A60 Series: Tiger·tec Gold Special features Coated carbide (beschichtetes Hartmetall) Optimised chip control for rostfreiem Stahl Designed for medium to robust cutting conditions ISO 513 M application Indexable turning insert format FAQ What materials is this insert intended for? The TS16-IL-A60 WMP32G is specified for machining rostfreiem Stahl and is classified for ISO M applications. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold on the WMP32G grade increases wear resistance and thermal stability, enabling more consistent cutting-edge life during continuous turning operations. What advantage does the IL‑A60 chipbreaker provide? The IL‑A60 geometry promotes short, controlled chips and reduces the tendency for workpiece surface damage when cutting rostfreiem Stahl. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
TS16-IL-AG55 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, precise IL-AG55 chip control and a grade optimised for stainless steel to keep cycles running with fewer tool changes; order via Metav Werkzeuge or request tailored advice from our consultants. TS16-IL-AG55 WMP32G indexable turning insert – Walter Tools (for stainless steel) TS16-IL-AG55 WMP32G is an indexable turning insert designed for reliable performance when machining stainless steel under medium to robust cutting conditions Tiger·tec Gold coated carbide grade WMP32G IL-AG55 chipbreaker for controlled chip formation Optimised for stainless steel machining Walter Tools quality and process stability Consistent chip control for dependable productivity The IL-AG55 chipbreaker is engineered to promote predictable chip formation when machining stainless steel, a material group prone to work-hardening and high thermal loads. The combination of chip geometry and the WMP32G cutting grade reduces built-up edge and helps maintain a stable cutting edge over longer intervals. For production environments where process stability matters, this results in fewer interruptions for regrinding or index changes and a lower risk of scrapped parts owing to surface defects. The term "chipbreaker" refers to the small groove and flank geometry that shapes chips away from the cutting zone, making swarf evacuation more reliable and reducing the likelihood of entanglement or tool damage. Longer tool life and predictable wear under demanding conditions A coated carbide in the Tiger·tec Gold family provides a hard, wear-resistant surface while maintaining a tough substrate to resist chipping. This balance is particularly beneficial for stainless steel, which generates higher temperatures at the cutting edge; the coating helps to lower adhesion and abrasive wear, while the carbide core sustains the cutting forces. The result is a higher number of parts produced per index and improved repeatability of surface finish and dimensional accuracy. In practice, this translates to better throughput and lower tooling-related downtime—advantages that are measurable in batch and continuous production work. Practical selection and integration guidance for workshop use The ISO-style designation TS16-IL-AG55 WMP32G simplifies matching to compatible toolholders and holders with the corresponding seat form. Selecting the correct insert geometry and chipbreaker ensures compatibility with existing turning systems and supports efficient setting of speeds and feeds for stainless steel. Where agreement on cutting data is required or for unusual material conditions, technical consultation will help tailor cutting speeds and feed rates to balance tool life and component quality. Indexable inserts like this one allow quick replacement without complex regrinding, aiding fast tool changes and consistent process control. For machining stainless steel with a focus on reliability and process security, contact Metav Werkzeuge for availability and application advice on Walter Tools Tiger·tec Gold grade WMP32G — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical Data Article number: TS16-IL-AG55-WMP32G-WALTER Type: Indexable turning insert Brand: Walter Tools Facts Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IL-AG55 Special features Application: stainless steel Coating: coated carbide Designed for medium to robust cutting conditions ISO designation: TS16-IL-AG55 WMP32G FAQ What materials is the TS16-IL-AG55 WMP32G intended for? The TS16-IL-AG55 WMP32G insert from Walter Tools is intended primarily for machining stainless steel and is optimised for the thermal and mechanical characteristics associated with those alloys. What does the WMP32G grade indicate? WMP32G denotes a Walter Tools cutting grade in the Tiger·tec Gold family, a coated carbide formulation designed to balance wear resistance and toughness for consistent performance on stainless steel. How does the IL-AG55 chipbreaker benefit the machining process? The IL-AG55 chipbreaker improves chip control and evacuation, reducing the risk of built-up edge and helping to maintain consistent surface finish when turning stainless steel. How should the insert be matched to a toolholder? Match the ISO-style designation TS16-IL-AG55 to a compatible toolholder seat; confirming the seat form and clamping method ensures correct positioning and secure clamping of the insert. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com Protected trademarks and trade names belong to their respective owners. Walter Tools is used here for explanation of the product origin and performance characteristics. There is no commercial affiliation implied between Metav Werkzeuge and the trademark owners. The offered item is an original, factory-new product of its manufacturer.
TS16-IL-AG60 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold performance and the WMP32G grade for reliable stainless steel machining; the combination of advanced coating and an optimised chipformer yields stable cutting edges and predictable tool life. Order via Metav Werkzeuge or consult our specialists for integration into existing turning processes. TS16-IL-AG60 WMP32G indexable turning insert — Tiger·tec Gold coating, for stainless steel (Walter Tools) The TS16-IL-AG60 WMP32G is an indexable turning insert engineered for stable chip formation and long tool life when machining stainless steels under medium to robust conditions Tiger·tec Gold coating for extended tool life Optimised chipformer IL‑AG60 for stable chips Designed for machining stainless steel (M) Walter Tools quality and consistent edge stability Consistent performance for challenging stainless steel applications The WMP32G grade is a coated carbide solution developed within the Tiger·tec Gold family to address the specific demands of machining stainless steel. Stainless materials tend to work-harden, produce high cutting temperatures and form built-up edge; the insert’s coating and substrate combination reduces edge degradation and supports a stable cutting edge. This leads to more predictable tool life and fewer unplanned tool changes, improving process throughput and reducing cycle-time variability. Reliable chip control that protects the process The IL‑AG60 chipformer is tailored to produce short, controllable chips when machining sticky or ductile stainless alloys. Effective chip control reduces the risk of entanglement, improves surface finish consistency and lowers the chance of secondary part damage. For production environments where machine downtime and part rework are costly, the insert’s chipforming geometry contributes directly to improved process reliability and smoother material flow in automated turning cycles. Productivity gains through coating and material design Combining Tiger·tec Gold coating technology with a robust substrate provides a balance of wear resistance and toughness that supports higher cutting parameters compared with conventional grades. The coating enhances heat resistance and reduces adhesive wear, while the carbide body maintains strength under interrupted cuts. As a result, the insert helps to increase metal removal rates or to extend intervals between index changes, offering tangible gains in workshop productivity without sacrificing surface quality. Practical integration and application guidance Selection of the correct insert variant and machining parameters remains essential for optimal results. The indexable insert is intended for ISO group M applications and pairs well with appropriate tool holders and coolant strategies for stainless steel. For shop floors seeking to standardise setups, the insert integrates into common clamping systems and benefits from routine process monitoring. If additional process data or parameter recommendations are required, technical support can advise on feeds, speeds and coolant options based on component geometry and alloy. Contact Metav Werkzeuge for tailored advice on integrating Walter Tools Tiger·tec Gold inserts into production and to discuss availability and delivery options Technical Data SKU: TS16-IL-AG60-WMP32G-WALTER Article: Drehwendeschneidplatte TS16-IL-AG60 WMP32G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WMP32G Chipformer: IL‑AG60 Application group: M (stainless steel) ISO designation: TS16-IL-AG60 WMP32G Facts No dimensional or cutting-edge radius specifications supplied Special features Coating technology: Tiger·tec Gold Carbide type: coated carbide (WMP32G) Suitable for: stainless steel (ISO group M) Chipformer: IL‑AG60 for stable chip formation FAQ What materials is this insert intended for? The TS16-IL-AG60 WMP32G insert is specified for ISO group M applications and is designed primarily for machining stainless steel. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WMP32G grade increases heat resistance and reduces adhesive wear, extending the insert’s cutting life under the elevated temperatures common in stainless steel turning. What benefit does the IL‑AG60 chipformer provide? The IL‑AG60 geometry produces short, controlled chips that reduce entanglement and improve surface consistency when using the Walter Tools indexable insert. Can the insert be used for heavy interrupted cuts? The WMP32G grade balances toughness and wear resistance; it is suited to medium to robust conditions, helping maintain a stable cutting edge in applications with occasional interruptions. Is special tooling required to use this insert? The TS16-IL-AG60 WMP32G fits standard indexable turning tool holders compatible with its ISO designation; toolholder choice and coolant strategy should be matched to the workpiece and process for optimal results. The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only and do not imply any affiliation with Metav Werkzeuge.
TS16-IL-G55 WMP32G WMP32G Wendeplatten - Walter Tools
High wear resistance and reliable chip control deliver consistent machining results, while the Tiger·tec Gold coating and the WMP32G grade reduce downtime and extend tool life. Order the insert directly via Metav Werkzeuge or consult the technical team for application support. TS16-IL-G55 WMP32G indexable turning insert – Walter Tools for stainless steels, Tiger·tec Gold coated The TS16-IL-G55 WMP32G is an indexable turning insert designed for secure chip formation and productive machining of stainless steels in medium to robust conditions Tiger·tec Gold coating for stainless steels WMP32G grade with stable cutting edge IL‑G55 chipbreaker for controlled chips Suited to medium and robust machining conditions Productivity gains through a robust coated grade The combination of Tiger·tec Gold coating and the WMP32G grade delivers tangible productivity advantages: higher wear resistance and sustained cutting-edge stability lead to longer tool life and fewer interruptions for insert changes. The coated carbide composition reduces flank wear and supports stable chip formation, which in turn lowers cycle-time variability on serial turning operations. For production contexts where repeatable surface quality and consistent tool life are required, this grade offers a measurable reduction in maintenance and set-up frequency while maintaining cutting performance in demanding stainless steel applications. Reliable chip control for stainless steels (ISO M) Stainless steels often exhibit toughness and a tendency to form long, tenacious chips; the IL‑G55 chipbreaker geometry is engineered to produce short, controllable chips under the heat and ductility conditions typical of ISO M materials. By promoting predictable chip breakage and evacuation, the insert reduces the risk of workpiece damage and machine downtime. The chipbreaker functions by guiding the chip flow and managing local deformation ahead of the cutting edge; this makes roughing passes safer and finishing passes more consistent without sacrificing material removal rate. Integration into production lines and process security The TS16‑IL‑G55 geometry and ISO designation ensure compatibility with a broad range of tool holders and turning systems, enabling straightforward integration into existing tool kits. Using a coated grade designed for stainless steels improves process security: fewer regrinds, stable tolerances and constant surface finish across batches. When introducing a new insert grade into a shop, trial a standardised cutting parameter set and monitor tool wear; the predictable behaviour of this coated insert simplifies parameter optimisation and supports a faster ramp-up to full production. Contact Metav Werkzeuge for application-specific recommendations and procurement assistance for Walter Tools inserts and compatible tool holders. Technical data Article number (SKU): TS16-IL-G55-WMP32G-WALTER ISO designation: TS16-IL-G55 WMP32G Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IL‑G55 Material group: M Facts Suitable for: stainless steels (ISO M) Coating technology: Tiger·tec Gold Material of grade: coated carbide Typical use: medium to robust turning operations Special features Stable chip formation for ISO M materials Enhanced wear resistance and cutting-edge life Designed for productive machining and process reliability Walter Tools engineered grade FAQ What materials is this insert suitable for? The TS16‑IL‑G55 WMP32G indexable turning insert by Walter Tools is designed primarily for stainless steels (ISO M), addressing the toughness and heat-related challenges typical of these alloys. How does the IL‑G55 chipbreaker help in practice? The IL‑G55 chipbreaker promotes controlled, short chips by guiding chip flow and reducing chip length, which improves safety and reduces the need for manual chip handling during turning. Is this grade suitable for finishing operations? Yes, the WMP32G grade and Tiger·tec Gold coating support both robust roughing and consistent finishing passes when cutting parameters are optimised for stainless steels. Can the insert be used in existing tool holders? The TS16‑IL‑G55 geometry follows a standard ISO designation, enabling compatibility with a wide range of holding systems; verification of seat and clamping dimensions is recommended before production use. What performance benefits can be expected compared with uncoated grades? Compared with uncoated carbide, the coated WMP32G grade typically offers improved wear resistance, longer cutting-edge life and more consistent surface quality under the thermal loads associated with stainless steel turning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, factory-new goods from the manufacturer.
TS16-IL-G60 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of a coated-cemented-carbide grade engineered for demanding stainless steel work: long-lasting cutting edges and stable chip formation reduce downtime and raise process reliability. Order the insert directly via Metav Werkzeuge or ask their consultants for compatibility and delivery information. TS16-IL-G60 WMP32G indexable turning insert, Tiger·tec Gold coating — for stainless steel, Walter Tools TS16-IL-G60 WMP32G is an indexable turning insert designed for secure machining of stainless steels under medium to robust conditions Tiger·tec Gold coated carbide Grade WMP32G for stainless steel IL‑G60 chipbreaker for stable chips Consistent edge life and process security High-performance grade for stainless steel that secures chip control The TS16-IL-G60 WMP32G insert combines a coated cemented carbide substrate with the Tiger·tec Gold coating technology to address the particular challenges of machining stainless steel: material toughness, heat generation and a tendency to form built-up edge. The WMP32G designation denotes a Walter Tools grade optimised for these conditions, promoting stable chip formation and preserving the cutting edge. For workshops seeking predictable cutting behaviour, the improved friction properties of the coating support a controllable chip flow and reduce rework caused by adhesion or poor surface finish. Improved process security and extended tool life through targeted geometry The IL‑G60 chipbreaker provides the geometric basis for effective chip control when combined with the grade and coating. The tailored chipbreaker geometry manages chip curl and evacuation, lowering the risk of chatter and interrupted cuts, which in turn enhances process security and prolongs tool life. In practice, this means fewer tool changes and more consistent component tolerances during longer production runs. The insert’s ISO-style designation identifies its compatibility with toolholders engineered for TS16 inserts, enabling straightforward integration into existing turning setups. Practical guidance for integration and predictable results Integrating this insert into a production process typically requires attention to feed, depth of cut and cutting speed adapted to stainless steels; the combination of Tiger·tec Gold coating and the IL‑G60 chipbreaker supports stable cutting over a broad range of conditions. Selection should focus on toolholder clamping for TS16 geometry and a machining strategy that prioritises steady coolant application and controlled chip evacuation. For customers seeking rapid, reliable results, the insert offers a balance of wear resistance and toughness that suits batch production and demanding single-part machining alike. Request compatibility checks or a machining recommendation from Metav Werkzeuge to ensure seamless integration of Walter Tools inserts into the production line Technical Data SKU: TS16-IL-G60-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-IL-G60 WMP32G Walter Tools Product type: Indexable turning insert Manufacturer: Walter Tools Facts Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: IL‑G60 Material group: M (suitable for stainless steel) Design and special features Coated cemented carbide Suitable for stainless steel machining Stable chip formation and cutting edge security ISO designation: TS16‑IL‑G60 WMP32G Intended for toolholders accepting TS16 inserts FAQ Which materials is this insert intended for? The TS16‑IL‑G60 WMP32G insert is specified for stainless steel (material group M) and is optimised for medium to robust machining conditions. What coating and substrate are used on the insert? Walter Tools supplies the insert in a coated cemented carbide design using the Tiger·tec Gold coating technology to improve wear resistance and reduce adhesion on stainless steels. How does the IL‑G60 chipbreaker affect cutting performance? The IL‑G60 chipbreaker controls chip curl and evacuation, supporting stable chips and reducing the likelihood of built‑up edge and chatter during turning operations. Is the insert compatible with existing toolholders? The ISO designation TS16‑IL‑G60 indicates compatibility with toolholders designed for TS16 inserts; verification of clamping and seat geometry is recommended prior to use. What production benefits can be expected from using this grade? When applied correctly, the WMP32G grade with the Tiger·tec Gold coating delivers consistent edge life and improved process security, resulting in fewer tool changes and steadier part quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TS16-IL0.5ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of reliable chip control, a wear-resistant Tiger·tec Gold grade and compact TS16 form for consistent turning of rostfreier Stahl components; order genuine Walter Tools inserts via Metav Werkzeuge or request application advice from our technical team. TS16-IL0.5ISO WMP32G turning indexable insert — Tiger·tec Gold grade for rostfreier Stahl by Walter Tools The TS16-IL0.5ISO WMP32G is a compact turning insert designed for secure chip formation and stable cutting when machining rostfreier Stahl in medium to robust conditions Tiger·tec Gold coated for stable cutting edges WMP32G grade optimised for rostfreier Stahl IL0.5ISO chipbreaker for reliable chip control TS16 designation for compact turning operations Consistent cutting performance under heat and toughness The TS16-IL0.5ISO WMP32G insert combines the Tiger·tec Gold coating with a WMP32G coated-carbide grade to address the particular challenges of machining rostfreier Stahl. These alloys tend to be tough and generate high cutting temperatures; the selected grade promotes stable cutting edges and controlled wear, reducing the risk of built-up edge. The result is a more predictable tool life and improved surface integrity on turned parts, which supports high process reliability in production environments. Controlled chips and secure machining for shorter cycle times The IL0.5ISO chipbreaker geometry delivers consistent chip control, helping to avoid long, stringy chips that can interrupt automated turning cycles. Effective chip formation decreases manual intervention and cleaning, and it also helps maintain consistent cutting conditions throughout a batch. For compact turning operations identified by the TS16 form, this geometry supports efficient material evacuation close to the toolholder, which contributes to stable feed and speed settings and therefore to measurable productivity gains. Application guidance and benefits for workshop efficiency Designed primarily for rostfreie Stähle, the insert is suitable for medium to robust cutting applications where reliability and repeatable performance matter. The combination of grade and chipbreaker reduces unexpected tool changes and supports consistent surface finish quality. For advice on cutting data, toolholding or adapting the insert to specific part geometries, Metav Werkzeuge provides technical consultation; lightweight adjustments to speeds or feeds often yield significant improvements in tool life and finished-part tolerances. The specification favours users seeking process stability and reproducible results. Contact Metav Werkzeuge for tailored application advice and to secure genuine Walter Tools Tiger·tec Gold WMP32G inserts for rostfreier Stahl operations Technical data Article number: TS16-IL0.5ISO-WMP32G-WALTER Name: Drehwendeschneidplatte TS16-IL0.5ISO WMP32G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Series: Tiger-tec Gold Grade: WMP32G Designation: TS16-IL0.5ISO WMP32G Core specifications Cutting geometry: IL0.5ISO Size code: TS16 Material group: M Suitable for: rostfreier Stahl Materials & special features Coating technology: Tiger·tec Gold (coated carbide) Carbide sort: WMP32G Chipbreaker: IL0.5ISO Intended application: turning / compact turning operations FAQ What materials is this insert designed for? The TS16-IL0.5ISO WMP32G insert is specifically engineered for rostfreier Stahl machining according to the grade and chipbreaker combination. Which feature improves chip control on this insert? The IL0.5ISO chipbreaker geometry ensures reliable chip control, helping to maintain uninterrupted turning cycles with the Walter Tools insert. Is the WMP32G grade suitable for high-temperature cutting? Yes, the WMP32G grade with Tiger·tec Gold coating is tailored to withstand the higher temperatures and adhesive tendencies typical of rostfreie Stähle. How does the TS16 form affect toolholder selection? The compact TS16 designation suits toolholders for close-clearance turning operations and supports stable engagement when machining smaller diameters. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, factory-new goods of the manufacturer.
TS16-IL0.75ISO WMP32G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the WMP32G grade ensures reliable chip control and extended tool life in demanding stainless steel applications; pairing these benefits with the IL0.75ISO chipbreaker supports stable cutting edges and consistent productivity. Order the TS16-IL0.75ISO WMP32G turning insert directly via Metav Werkzeuge or consult the team for application advice. TS16-IL0.75ISO WMP32G turning insert with IL0.75ISO chipbreaker for stainless steel — Walter Tools The TS16-IL0.75ISO WMP32G is a coated carbide turning insert from Walter Tools engineered for secure chip formation and reliable performance when machining stainless steel under medium to robust conditions. Tiger·tec Gold coating for extended tool life IL0.75ISO chipbreaker for stable chip control Optimised for stainless steel (ISO group M) Consistent stainless-steel machining for predictable output The combination of the WMP32G grade and Tiger·tec Gold technology promotes stable cutting edges and predictable wear behaviour when working with stainless steel. The coated carbide substrate reduces adhesion and built-up edge tendencies that typically affect austenitic and martensitic alloys, which improves cycle consistency and lowers the risk of unscheduled tool changes. This specification supports production runs where repeatability and surface integrity are priorities, enabling a steady process window without frequent rework. Chip control and geometry that reduce interruptions The integrated IL0.75ISO chipbreaker is designed to guide swarf away from the cutting zone, providing reliable chip formation even under varying feed rates. Effective chip control reduces downtime associated with chip entanglement and improves machine availability. The insert’s geometry, paired with the coating, helps maintain a sharp contact zone and reduces friction, contributing to improved process reliability and smoother finishing. For operators transitioning to higher feeds or interrupted cuts, the design offers practical advantages in keeping operations continuous. Benefits that matter on the shop floor Selecting this insert delivers tangible operational benefits: longer tool life, fewer insert changes and improved surface quality on stainless parts. The WMP32G grade, as a coated carbide, is tuned for toughness and wear resistance in corrosion-resistant alloys where heat generation and work hardening can be challenging. This makes the insert suitable for serial turning of shafts, fittings and components where consistent dimensional control and surface finish are required. Technical teams will find the insert straightforward to integrate into existing toolholders and process set-ups, with familiar handling and secure clamping characteristics. For application support or to discuss suitability for specific stainless-steel grades, contact Metav Werkzeuge—consultants can advise on optimal cutting data and insertion strategies to maximise the benefits of Walter Tools Tiger·tec Gold technology. Technical data SKU: TS16-IL0.75ISO-WMP32G-WALTER Name: TS16-IL0.75ISO WMP32G Product type: Turning insert Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IL0.75ISO Material group: M (stainless steel) Designation: TS16-IL0.75ISO WMP32G Manufacturer: Walter Tools Facts Size/designation: TS16 Chipbreaker code: IL0.75ISO Grade code: WMP32G Special features Coating and substrate: Tiger·tec Gold (coated carbide) Optimised for stainless steel (ISO group M) Suitable for medium to robust cutting conditions Stable chip formation and reliable cutting edge behaviour FAQ What stainless-steel grades is this insert suitable for? The TS16-IL0.75ISO WMP32G insert is tuned for ISO group M materials; the WMP32G grade and Tiger·tec Gold coating support machining of common stainless grades with improved chip control and wear resistance. How does the IL0.75ISO chipbreaker affect machining? The IL0.75ISO chipbreaker promotes consistent chip formation and evacuation, reducing chip-related interruptions and helping to maintain surface finish and tool life during turning operations. Can this insert be used for finishing and medium turning? Yes, the coated carbide composition and geometry of this insert balance toughness and wear resistance, making it suited to both finishing and medium turning tasks in stainless steel components. Is the TS16-IL0.75ISO WMP32G compatible with standard toolholders? The designation TS16 corresponds to conventional insert sizing; the insert fits typical turning toolholders designed for that format, enabling straightforward integration into existing tooling systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation or partnership implied between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
TS16-IL08UN WMP32G Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Gold coated WMP32G grade and the IL08UN chipbreaker for reliable chip control and durable cutting edges; ideal for demanding stainless‑steel turning. Order the insert via Metav Werkzeuge or consult the technical team for tailored application advice. TS16-IL08UN WMP32G indexable turning insert by Walter Tools — Tiger‑tec Gold coating, for stainless steel A TS16-IL08UN WMP32G indexable turning insert engineered for secure chip formation and repeatable performance when machining stainless steel under medium to robust cutting conditions. Tiger‑tec Gold coating for extended tool life IL08UN chipbreaker for consistent chip control WMP32G coated carbide suited to stainless steel Stable cutting edge for medium to robust cuts Controlled chips and fewer interruptions in stainless‑steel turning The optimised IL08UN chipbreaker delivers predictable chip formation when machining stainless steel (ISO M), reducing interruptions caused by long, tangled chips and minimising the risk of built‑up edge. The combination of geometry and the dedicated chip‑control design enables a steady evacuation of chips, which supports uninterrupted cycles and reduces manual intervention. For production environments where process reliability is essential, the chipbreaker offers a tangible improvement in machining stability and surface integrity. Longer tool life thanks to Tiger‑tec Gold coating and WMP32G grade The WMP32G grade, part of the Tiger‑tec Gold family, is a coated carbide developed for stainless‑steel applications that tend to cause adhesion and high heat at the cutting zone. The multi‑layer coating enhances thermal resistance and helps preserve the cutting edge under elevated temperatures, extending service intervals and lowering tooling costs per component. This material and coating combination is particularly suited to operations that demand a balance of wear resistance and edge security. Productivity gains from stable cutting edges and repeatable results A stable cutting edge reduces process variability and contributes directly to higher productivity: fewer index changes, more consistent component quality and predictable tool life. The insert’s configuration supports medium to robust cutting parameters while maintaining surface finish and dimensional repeatability. In setups where cycle times and throughput matter, adopting this insert will support faster, more reliable turning operations and fewer unexpected stoppages. Practical application and selection guidance for shop floors The insert is intended for turning tasks on stainless steel in production or job‑shop environments that require robust performance. Selection should consider workpiece alloy and part geometry; the combination of WMP32G coated carbide and the IL08UN chipbreaker is a strong starting point for ferritic and austenitic stainless grades prone to built‑up edge. If further optimisation is required for specific alloys or feeds and speeds, Metav Werkzeuge can provide cutting data recommendations and process support to match the insert to the machining task. For tailored machining advice or to secure supply of this Walter Tools TS16-IL08UN WMP32G indexable turning insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 and discuss application requirements with the technical team Technical data Article number: TS16-IL08UN-WMP32G-WALTER Article designation: TS16-IL08UN WMP32G Manufacturer: Walter Tools Product type: Indexable turning insert Core data Material group: M (stainless steel application) Chipbreaker: IL08UN Coating series: Tiger‑tec Gold Features Coated carbide grade WMP32G Suited for stainless steel (ISO M) Stable cutting edge for medium to robust conditions FAQ Which materials is this insert suitable for? The TS16-IL08UN WMP32G insert is designed primarily for stainless steel machining (ISO group M) and performs well in applications where adhesion and heat build‑up are characteristic. What is the role of the IL08UN chipbreaker? The IL08UN chipbreaker enforces consistent chip geometry and evacuation, improving chip control and reducing occurrences of built‑up edge during turning of stainless‑steel components. Is the WMP32G grade coated and what advantages does it bring? Yes; WMP32G is a coated carbide grade belonging to the Tiger‑tec Gold technology, offering enhanced thermal resistance and improved edge life when turning stainless steel. For which cutting conditions is the insert recommended? The insert is aimed at medium to robust cutting conditions on stainless steel where a stable edge and secure chip control support higher productivity and repeatable surface quality. How can the insert be identified in stock and ordering systems? The SKU for ordering and stock identification is TS16-IL08UN-WMP32G-WALTER, listed as an indexable turning insert from Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Mention of brand names such as Walter Tools is for explanatory purposes only and does not imply any affiliation or endorsement. The offered article is an original, factory‑new product of the manufacturer.
TS16-IL08W WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold technology and the WMP32G grade to achieve reliable, repeatable turning in stainless steel with excellent chip control and edge stability; order directly via Metav Werkzeuge or consult our specialists for application advice. TS16-IL08W WMP32G indexable turning insert — Tiger·tec Gold, IL08W chipbreaker, Walter Tools TS16-IL08W WMP32G is an indexable turning insert designed for robust machining tasks in stainless steels, combining a coated carbide grade with an optimised chipbreaker for stable cutting under medium to heavy conditions Tiger·tec Gold coated carbide Optimised IL08W chipbreaker Designed for stainless steel (M) Stable cutting edge and process security Consistent productivity through coating and geometry The combination of the Tiger·tec Gold coating and the WMP32G coated carbide grade delivers a measurable improvement in process reliability when turning austenitic and ferritic stainless steel. The coating reduces friction at the cutting zone and helps to limit adhesion and built‑up edge formation, while the substrate sustains mechanical loads. Together these characteristics result in improved tool life and a more consistent surface finish, reducing unplanned tool changes and boosting overall machining output. Safer chip formation and reduced rework The IL08W chipbreaker geometry is optimised for secure chip control in challenging stainless steel grades that tend to form long, stringy chips. By promoting regular, controlled chip segmentation the insert minimises the risk of entanglement and helps maintain stable cutting forces. This targeted chip management lowers the likelihood of surface damage and subsequent rework, supporting leaner production flows and greater operator confidence at the machine. Application benefits and process integration As a coated indexable insert from Walter Tools, this grade is intended for medium to robust cutting conditions in the group M category. The engineered interplay between substrate and coating enables predictable wear behaviour and repeatable results across shifts. For production environments seeking a balance of productivity and reproducibility, the insert supports stable cutting edges and easier process set‑up, which translates into fewer machine stoppages and improved cost per part over time. For reliable stainless steel turning with Walter Tools’ Tiger·tec Gold technology, contact Metav Werkzeuge for tailored recommendations and technical data at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: TS16-IL08W-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-IL08W WMP32G Walter Tools Type: Indexable turning insert (Drehwendeschneidplatte) Designation: TS16-IL08W WMP32G Brand: Walter Tools Core specifications Grade/Coating: Tiger·tec Gold (coated carbide) Grade name: WMP32G Chipbreaker: IL08W Material group: M (stainless steel) Features & suitability Coated carbide, Tiger·tec Gold technology Optimised for stainless steel machining Stable cutting edge and improved chip control Series: Tiger·tec Gold FAQ What materials is this insert designed for? The TS16-IL08W WMP32G is specified for the material group M, i.e. machining stainless steel, where the grade supports secure chip formation and stable cutting edges. How does the Tiger·tec Gold coating help in practice? The Tiger·tec Gold coating reduces friction and heat at the cutting zone, improving wear resistance and helping the WMP32G grade maintain edge integrity during prolonged turning of stainless steel. Is the IL08W chipbreaker suitable for demanding cuts? Yes. The IL08W chipbreaker is engineered to produce controlled chip segmentation in tougher stainless materials, reducing entanglement and supporting continuous production. Can this insert be used for light finishing operations? While optimised for medium to robust conditions, the insert can deliver consistent surface quality; for fine finishing, machining parameters should be adjusted to suit the specific workpiece and machine setup. What advantage does Walter Tools’ grade offer over generic inserts? Walter Tools’ WMP32G grade, in the Tiger·tec Gold series, provides a coated carbide formulation and geometry designed to counter common stainless steel issues like built‑up edge, offering improved repeatability and process security. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group.
TS16-IL1.0ISO WMP22G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WMP22G coated‑carbide grade and the IL1.0ISO chipbreaker for reliable chip formation and extended tool life when machining stainless steel; order directly via Metav Werkzeuge or consult their specialists for cutting data and application support. TS16-IL1.0ISO WMP22G turning indexable insert — IL1.0ISO chipbreaker, for stainless steel | Walter Tools The TS16-IL1.0ISO WMP22G is a turning indexable insert designed to provide secure chip control and consistent performance when machining stainless steel in medium to robust operating conditions. Tiger·tec Gold coating for extended tool life Optimised IL1.0ISO chipbreaker for stable chips Suited for stainless steel machining Maximise uptime with robust grade and coating The combination of the WMP22G grade and Tiger·tec Gold technology yields a coated carbide insert engineered for durability and consistent wear behaviour. In practical terms, this means fewer tool changes and reduced downtime: the coating supports thermal stability at the cutting edge and delays abrasive wear, while the substrate maintains edge integrity under intermittent or continuous cuts. This rational advantage translates directly into higher process reliability and more predictable component output in series production. Predictable chip control for safer turning The IL1.0ISO chipbreaker is optimised to deliver controlled chip formation when machining stainless steel, materials that typically cause tough, heat‑sensitive chips and a propensity for built‑up edge. By shaping the chip flow and fragmenting swarf reliably, the chipbreaker reduces the risk of entanglement and improves machine stability. The result is a safer turning process and a more consistent surface finish, especially on parts where repeatability matters. Built for stainless steel under medium to robust conditions Classified for the ISO M group, this insert addresses the typical challenges of stainless steel: high ductility, work hardening and thermal concentration at the cutting zone. The WMP22G grade supports secure chip formation and a stable cutting edge in these conditions, helping to mitigate common issues such as edge build‑up and premature flank wear. For applications requiring dependable performance across varying feed rates and cut depths, this insert offers a pragmatic balance between life and machining security. Simple adoption and efficient production flow Marked with the TS16‑designation and equipped with the IL1.0ISO chipbreaker, the insert integrates with holders that accept this ISO-style family, enabling straightforward replacement and indexing. Fewer tool changes and stable cutting behaviour reduce process variability and contribute to predictable cycle times. For production planners and shopfloor engineers, that means easier process documentation and a clearer return on tooling investments. For specific clamping or holder compatibility, consult Metav Werkzeuge’s technical advisors. For tailored machining advice on Walter Tools Tiger·tec Gold inserts and to secure the correct TS16-IL1.0ISO WMP22G solution for stainless steel applications, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TS16-IL1.0ISO-WMP22G-WALTER Label: Drehwendeschneidplatte TS16-IL1.0ISO WMP22G Walter Tools Product type: turning indexable insert Series: Tiger·tec Gold Grade: WMP22G Chipbreaker: IL1.0ISO Material group: M Manufacturer: Walter Tools Facts Application: stainless steel (ISO M) Coated carbide grade Designation: TS16-IL1.0ISO WMP22G Special features Tiger·tec Gold coating technology Optimised IL1.0ISO chipformer for stable chips Stable cutting edge for medium to robust conditions Broad material coverage within ISO M FAQ Which materials is this insert intended for? The TS16-IL1.0ISO WMP22G turning insert from Walter Tools is intended primarily for stainless steel and is classified for the ISO M material group under medium to robust cutting conditions. What advantage does the Tiger·tec Gold technology provide? Tiger·tec Gold provides a multilayer coating system that increases thermal and abrasive resistance, improving the performance and life of the WMP22G coated‑carbide grade under demanding cutting conditions. How does the IL1.0ISO chipbreaker affect machining? The IL1.0ISO chipbreaker shapes and breaks the swarf to deliver predictable chip control, which reduces the risk of entanglement, improves machine stability and supports a consistent surface finish when turning stainless steel. Is WMP22G a coated carbide grade? Yes, WMP22G is a coated‑carbide grade designed for the Tiger·tec Gold family; it balances wear resistance and edge stability for machining stainless steels. Will this insert help with surface finish and tool life? The combination of the WMP22G grade and Tiger·tec Gold coating promotes a stable cutting edge and controlled chip formation, which together contribute to improved surface quality and extended tool life in many stainless steel turning applications. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
TS16-IL1.0ISO WMP32G Wendeplatten - Walter Tools
Take advantage of high wear resistance and stable chip control when machining rostfreier Stahl; the Tiger·tec Gold grade WMP32G combines durable, coated carbide with a chipbreaker designed for medium to robust cutting, helping to reduce interruptions and extend time between index changes. Order directly via Metav Werkzeuge or request advice from the consultants if further specification matching is required. TS16-IL1.0ISO WMP32G – Tiger·tec Gold turning indexable insert for rostfreier Stahl, Walter Tools The TS16-IL1.0ISO WMP32G is a coated carbide turning indexable insert from the Tiger·tec Gold series, engineered for reliable performance when machining rostfreier Stahl under medium to robust cutting conditions. Tiger·tec Gold coating for enhanced tool life Optimised for rostfreier Stahl machining Coated carbide grade WMP32G for robust cutting Stable chip formation and reliable edge performance Higher uptime through tailored grade and coating The combination of the WMP32G grade with Tiger·tec Gold coating delivers increased wear resistance and consistent cutting performance. For materials in the M group, i.e. rostfreier Stahl, this coated carbide reduces the tendency for built-up edge and work hardening by maintaining a stable cutting edge over longer cycles. The result is fewer tool indices and a smoother production flow, which supports predictable planning and lower machine idle times. Predictable chip control and process reliability The IL1.0ISO chipbreaker geometry is designed to generate manageable chips and controlled evacuation at typical turning feeds. By promoting uniform chip formation and breaking, the insert reduces the risk of entanglement and machine stoppages; this improves process reliability and contributes to safer, more efficient operations. For production teams unfamiliar with chipbreakers: the geometry channels and compresses the material flow so chips curl and fracture before contacting the workpiece or toolholder. Practical benefits for workshop integration and productivity Integration into existing toolholders is straightforward thanks to the standard insert designation TS16-IL1.0ISO WMP32G, permitting fast index changes and minimal setup time. The coated carbide formulation supports higher cutting intervals between inspections, which lowers handling and replacement frequency. For batch and continuous work on rostfreier Stahl, this combination delivers a balance of edge stability and throughput that helps maintain consistent surface quality and dimensional control. For specification checks or to secure supply of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for application advice and availability: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TS16-IL1.0ISO-WMP32G-WALTER Product label: Drehwendeschneidplatte TS16-IL1.0ISO WMP32G Walter Tools Product type: Turning indexable insert Facts Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IL1.0ISO Material group: M (rostfreie Stähle) Special features Coated carbide cutting grade Optimised for rostfreier Stahl machining Stable chip formation and edge performance Standard ISO insert designation TS16-IL1.0ISO WMP32G FAQ Which materials is this insert suited for? The TS16-IL1.0ISO WMP32G is specifically designed for machining materials in the M group and is therefore suited for rostfreier Stahl applications, where stable chip control and resistance to built-up edge are required. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WMP32G grade improves wear resistance and thermal stability, which helps the insert maintain a reliable cutting edge and longer service intervals in demanding rostfreier Stahl operations. How does the IL1.0ISO chipbreaker affect machining? The IL1.0ISO chipbreaker promotes controlled chip formation and fracture, reducing the likelihood of chip entanglement and contributing to smoother, more predictable turning cycles with consistent surface quality. Can the insert be used for uninterrupted production runs? Yes; the WMP32G coating and robust edge behaviour support longer intervals between index changes, making the insert suitable for continuous or batch production where downtime reduction is important. Is special tooling required to use this insert? No specialised tooling is necessary beyond a compatible toolholder designed for ISO TS16 inserts; the designation TS16-IL1.0ISO WMP32G aligns with standard insert interfaces for quick integration. Protected trademarks and trade names are the property of their respective owners. The referenced brand Walter Tools is mentioned for identification purposes only; there is no affiliation between the seller and the trademark owners. The offered article is an original, factory-new product of the manufacturer. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
TS16-IL1.25ISO WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WMP32G grade and the IL1.25ISO chipbreaker for secure machining of rostfreier Stahl; reliable edge stability and consistent chip formation support uninterrupted production. Order the TS16-IL1.25ISO WMP32G directly via Metav Werkzeuge or consult our technical advisers for process optimisation. TS16-IL1.25ISO WMP32G indexable turning insert for rostfreier Stahl — Walter Tools (Tiger·tec Gold) The TS16-IL1.25ISO WMP32G is an indexable turning insert engineered for medium to robust turning operations in rostfreier Stahl, combining a high-performance Tiger·tec Gold coating with a dedicated IL1.25ISO chipbreaker to maintain process stability under demanding conditions. Tiger·tec Gold coating for improved wear resistance Grade WMP32G for rostfreier Stahl machining IL1.25ISO chipbreaker for stable chip control Prolong tool life with a high-performance coated grade The combination of the Tiger·tec Gold coating and the WMP32G grade means a coated carbide that resists abrasive and adhesive wear during the machining of rostfreier Stahl. Coated grades like this form a protective layer that reduces thermal and chemical attack on the substrate, producing enhanced wear resistance and a more stable cutting edge. For production environments where surface quality and repeatability matter, this insert reduces the frequency of tool changes and contributes to predictable maintenance cycles. The result is improved machine uptime and a smoother production flow without compromising component finish. Achieve consistent chip control and reduced built-up edge The IL1.25ISO chipbreaker is optimised for the particular deformation and heat behaviour of rostfreie Stähle, helping to detach and control chips reliably across a range of cutting conditions. Effective chip control lowers the risk of tangled chips, prevents damage to the workpiece, and reduces interruptions caused by manual chip clearing. In materials prone to built-up edge, a matching chipbreaker supports a consistent cutting geometry, which in turn preserves dimensional accuracy and surface integrity. This reliable chip management improves process security and cuts rework risk in continuous turning operations. Integrate easily into production for measurable process gains As an indexable insert with an ISO designation that reflects its geometry, the TS16-IL1.25ISO WMP32G is straightforward to implement in compatible toolholders and turning systems. The clear designation supports shop-floor planning and ensures repeatable replacement and indexing; less time is spent on adjustments and more on productive cutting. Walter Tools’ focus on a stable cutting edge and good chip control means fewer unpredictable tool failures and consistent part quality, which supports cost-efficiency across batches. For manufacturers seeking to raise throughput while maintaining finish and tolerances, this insert offers a pragmatic balance of performance and accessibility. For application-specific recommendations or to discuss suitable feeds and tooling clusters for the TS16-IL1.25ISO WMP32G, contact Metav Werkzeuge for technical consultancy at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: TS16-IL1.25ISO-WMP32G-WALTER Name: TS16-IL1.25ISO WMP32G Product type: indexable turning insert Series: Tiger·tec Gold Grade: WMP32G Facts SKU / UID: TS16-IL1.25ISO-WMP32G-WALTER Material group: M (rostfreie Stähle) Chipbreaker: IL1.25ISO Special features Coating: Tiger·tec Gold Material of insert: coated carbide Suitability: machining of rostfreier Stahl Brand: Walter Tools FAQ What materials is this insert designed for? The TS16-IL1.25ISO WMP32G is designed primarily for rostfreie Stähle, where the WMP32G grade and Tiger·tec Gold coating support secure chip formation and edge stability. How does the IL1.25ISO chipbreaker improve process reliability? The IL1.25ISO chipbreaker on the TS16-IL1.25ISO WMP32G controls chip shape and evacuation, reducing the risk of tangled chips and built-up edge when turning rostfreie Stähle. Can this insert be used in heavy-duty turning? The WMP32G grade and the robust geometry are intended for medium to robust cutting conditions; the combination of coating and chipbreaker supports reliable performance under demanding loads. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Trademarked names and product designations belong to their respective owners and are used here for explanation purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
TS16-IL1.5ISO WMP22G WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger·tec Gold coating, the WMP22G grade and an optimised IL1.5ISO chipbreaker to secure stable chip formation and reliable tool life in rostfreier Stahl turning. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TS16-IL1.5ISO WMP22G — coated carbide turning insert, Tiger·tec Gold, for rostfreier Stahl (Walter Tools) The TS16-IL1.5ISO WMP22G is a coated carbide indexable turning insert designed for productive machining of rostfreier Stahl, offering a balance of wear resistance and chip control for medium to robust cutting conditions. Tiger·tec Gold coating for extended tool life Grade WMP22G for stable chip formation Optimised IL1.5ISO chipbreaker for rostfreier Stahl Suited to medium to robust machining conditions Precision when machining rostfreier Stahl for consistent parts The insert delivers measurable process benefits where rostfreier Stahl is involved: the WMP22G grade, part of the Tiger·tec Gold family, is a coated carbide composition optimised to reduce built-up edge and sustain a stable cutting edge under elevated temperatures. Stable chip formation reduces interruptions and rework, which in turn increases productivity and lowers per-part manufacturing costs. For engineers seeking predictable outcomes in series production, the combination of grade and chipbreaker directly supports cycle-time stability and repeatable surface quality. Improved process reliability through optimised geometry and coating The IL1.5ISO chipbreaker is tuned for stainless turning, promoting short, controllable chips and minimising chip-related downtime. The Tiger·tec Gold coating contributes to heat resistance and abrasion performance, which together extend tool life and maintain edge integrity. In practice, this means fewer indexings and longer tool pack intervals, resulting in lower tool-change frequency and improved machining throughput. The insert’s geometry supports consistent depth of cut and feed choices, allowing programming strategies that favour higher metal removal rates without compromising component finish. Practical advantages for workshop workflows and tool management Adopting this indexable insert supports leaner tool inventories: the WMP22G grade covers typical rostfreier Stahl variants encountered in medical, food and general engineering, reducing the need for multiple specialities. The coated carbide substrate requires standard clamping and toolholders used in turning centres, simplifying logistics. Additionally, predictable wear behaviour facilitates life-based replacement planning rather than reactive changes, helping production planners to forecast consumable needs more accurately and reduce unexpected stops. Application guidance and compatibility with common turning operations The insert is intended for medium to robust cutting conditions typical of rostfreier Stahl machining—moderate depths of cut with feeds that avoid excessive strain on the edge. When combined with appropriate coolant strategies and stable workholding, the insert consistently delivers good surface quality and dimensional control. For integration into existing tool cycles, the insert’s chip control characteristics support automated chip conveyors and continuous-operation environments, making it suitable for both small-batch and higher-volume turning operations. For a tailored selection and availability of Walter Tools inserts like the TS16-IL1.5ISO WMP22G, contact Metav Werkzeuge — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 — for application advice and fast procurement. Technical data Article number: TS16-IL1.5ISO-WMP22G-WALTER SKU: TS16-IL1.5ISO-WMP22G-WALTER Designation: TS16-IL1.5ISO WMP22G Product type: Turning indexable insert Facts Grade: WMP22G Series: Tiger·tec Gold Chipbreaker: IL1.5ISO Material group: M Suitable for: rostfreier Stahl Special features Coating: Tiger·tec Gold (coated carbide) Material: coated carbide Application: medium to robust machining of rostfreier Stahl Stable chip formation and optimised cutting geometry FAQ What materials is this insert designed for? The TS16-IL1.5ISO WMP22G turning insert from Walter Tools is engineered primarily for machining rostfreier Stahl and performs best under medium to robust cutting conditions where stable chip control is required. How does the Tiger·tec Gold coating benefit tool life? Tiger·tec Gold on the WMP22G grade increases thermal and abrasion resistance, which helps the turning insert maintain a stable cutting edge and extends tool life during continuous rostfreier Stahl operations. What does the IL1.5ISO chipbreaker do in practice? The IL1.5ISO chipbreaker produces controllable, short chips tailored to rostfreie Stahl behaviour, reducing chip entanglement and supporting uninterrupted machining cycles with consistent surface finish. Is this insert suitable for automated, high-throughput cells? Yes; the combination of the WMP22G grade and IL1.5ISO chip control makes this insert well suited to automated turning cells where reliable chip handling and predictable wear are essential for uptime. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trade marks and product names mentioned are the property of their respective owners and are used for explanation only. There is no affiliation between our company and the named brands. The offered item is original, factory-new goods of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com