TS16-IL1.5ISO WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating and the optimised IL1.5ISO chipbreaker to achieve stable chip control and extended edge life when machining rostfreier Stahl; minimise interruptions and increase component throughput with a grade tuned for medium to robust conditions. Order the insert directly via Metav Werkzeuge or ask the consultants for application-specific guidance. TS16-IL1.5ISO WMP32G turning indexable insert — Tiger·tec Gold grade for rostfreier Stahl by Walter Tools TS16-IL1.5ISO WMP32G is a Tiger·tec Gold turning insert designed for robust machining of rostfreier Stahl, combining a coated carbide grade with an IL1.5ISO chipbreaker for controlled chip formation and reliable edge life Tiger·tec Gold coated WMP32G Optimised IL1.5ISO chipbreaker Designed for rostfreier Stahl machining Walter Tools quality and stable edge life Stable cutting on rostfreier Stahl for predictable production The combination of the WMP32G grade and the Tiger·tec Gold platform provides a cutting geometry and coating system developed for the demands of rostfreier Stahl. The coated carbide substrate supports stable chip formation under the high heat and adhesive tendencies typical for these alloys, which reduces build-up on the cutting edge and helps maintain dimensional consistency over longer tool life. In practical terms, this means fewer tool changes and more consistent part quality in medium to robust turning operations. Controlled chips and safer processes with the IL1.5ISO breaker The IL1.5ISO chipbreaker is engineered to direct chips away from the cutting zone and to fragment them reliably when cutting ductile, heat-generating materials. Controlled evacuation reduces the risk of entanglement and re-cutting, which improves surface finish and decreases secondary operations. For production environments where predictable chip behaviour is critical, the chip geometry delivers a direct benefit to cycle stability and operator safety while maintaining cutting efficiency. Coating and edge stability for increased productivity Coated carbide in the WMP32G grade offers a balance of wear resistance and toughness tailored for tougher rostfreier Stahl applications. The coating system reduces flank wear and supports a robust cutting edge, so fewer inserts are consumed for a given production run. The result is improved machine uptime and lower handling overheads. As part of a well-structured tooling strategy, this insert contributes to measurable productivity gains and reduced process variability. Fit-for-purpose selection and process integration This insert is intended for medium to robust cutting conditions and aligns with the ISO material group M designation for rostfreie Stähle. Selection should consider flank clearance, cutting speed and depth of cut appropriate for the workpiece and machining centre. For integration into existing toolpacks, the insert's geometry and grade support repeatable performance across batch sizes, and compatibility with standard turning toolholders makes implementation straightforward. For tailored cutting parameters and optimisation, consult Metav Werkzeuge’s technical advice. Contact Metav Werkzeuge for application advice on the Walter Tools TS16-IL1.5ISO WMP32G insert and to discuss appropriate cutting data for rostfreier Stahl machining; Metav Werkzeuge’s specialists are available to support process integration and grade selection Technical data Article number: TS16-IL1.5ISO-WMP32G-WALTER Description: Turning indexable insert TS16-IL1.5ISO WMP32G Walter Tools Manufacturer: Walter Tools Facts Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IL1.5ISO Material group: M (rostfreie Stähle) SKU: TS16-IL1.5ISO-WMP32G-WALTER Special features Coated carbide grade optimised for rostfreier Stahl Stable chip control for medium to robust conditions Designed for reliable edge life and process stability Part of the Tiger·tec Gold series by Walter Tools FAQ What materials is this insert designed to machine? This insert is formulated for machining rostfreier Stahl; the WMP32G grade and Tiger·tec Gold coating support the specific demands of these materials. How does the IL1.5ISO chipbreaker improve turning performance? The IL1.5ISO chipbreaker on the TS16-IL1.5ISO WMP32G insert shapes and fragments chips to aid evacuation, which enhances surface finish and reduces re-cutting in rostfreie Stahl applications. Is this insert suitable for high-feed or heavy roughing operations? The WMP32G grade is intended for medium to robust conditions; selection for heavy roughing should consider machine rigidity and cutting data, with the grade providing a balance of toughness and wear resistance. Can this insert be used in standard turning toolholders? Yes, the indexable design of the TS16-IL1.5ISO WMP32G is compatible with common turning toolholders specified for the corresponding insert geometry and clamping type. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned only for explanatory purposes. There is no connection between our company and the named brands. The offered item is original factory-new goods of the manufacturer.
TS16-IL1.75ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold cutting grade and the IL1.75ISO chipbreaker to achieve stable chip formation and consistent performance when machining stainless steels; order the insert directly via Metav Werkzeuge or consult our specialists for cutting data and optimisation advice. TS16-IL1.75ISO WMP32G indexable turning insert — Tiger‑tec Gold coated carbide, for stainless steels | Walter Tools The TS16-IL1.75ISO WMP32G is an indexable turning insert designed for reliable machining of rostfreier Stahl under medium to robust conditions, featuring a dedicated IL1.75ISO chipbreaker and a Tiger‑tec Gold coated carbide grade. Tiger‑tec Gold coated carbide IL1.75ISO chipbreaker for controlled chips Optimised for rostfreier Stahl machining Walter Tools engineered cutting grade High-efficiency performance for stainless steels The coated carbide WMP32G in the Tiger‑tec Gold series delivers a balance of wear resistance and edge stability that suits the demands of rostfreier Stahl machining. The combination of a robust coating and the insert geometry reduces the risk of built‑up edge and supports a steady cutting action, which translates into fewer interruptions and a more predictable tool life. For operations seeking to raise throughput without sacrificing surface quality, the insert’s design promotes continuous chip evacuation and consistent cutting conditions across a range of feed rates and depths. Why the IL1.75ISO chipbreaker improves cycle reliability The IL1.75ISO chipbreaker is specifically configured to produce short, controllable chips when turning ductile, work‑hardening stainless steels. A controlled chip form lowers the chance of chip entanglement and protects the workpiece surface, leading to improved finish and reduced re‑work. The geometry assists heat dissipation at the cutting zone and, together with the Tiger‑tec Gold coating, helps maintain a stable cutting edge under intermittent or heavier engagement, thereby supporting reliable production cycles and predictable tool change intervals. Practical benefits for workshop efficiency Integrating this indexable insert into established toolholders is straightforward and cost‑effective: the insert’s proven coating and grade help extend effective cutting life while limiting unexpected wear. The result is a reduction in setup frequency and less scrap from surface defects, improving overall process economy. For shops requiring specific cutting parameters, Metav Werkzeuge can provide tailored recommendations and data for achieving optimal feed, speed and toolpath strategies with this Walter Tools cutting grade. Contact Metav Werkzeuge for tailored cutting data and recommendations for Walter Tools Tiger‑tec Gold inserts or to arrange prompt delivery and technical consultation. Technical Data Article number: TS16-IL1.75ISO-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-IL1.75ISO WMP32G Walter Tools Core data Grade: WMP32G Chipbreaker: IL1.75ISO Series: Tiger‑tec Gold Special features Coated carbide Suitable for rostfreier Stahl Optimised for stable chip formation Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The TS16-IL1.75ISO WMP32G is specified for machining rostfreier Stahl and is formulated to handle the toughness and heat‑related behaviour of these alloys. How does the IL1.75ISO chipbreaker affect surface finish? The IL1.75ISO geometry produces short, predictable chips that reduce interference with the cutting zone, helping the insert maintain a consistent surface finish during turning operations. Is the WMP32G grade a coated carbide? Yes, WMP32G is a coated carbide grade within the Tiger‑tec Gold series, combining coating benefits with substrate toughness for extended performance. Can this insert be used in existing toolholders? The insert is designed for standard indexable turning applications; compatibility with holders depends on clamping and seat specifications — consult Metav Werkzeuge for toolholder matching. What production benefits can be expected from this insert? Users can expect improved chip control, fewer interruptions due to chip handling, and a more consistent tool life when machining rostfreier Stahl with this grade. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand presentation: Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. The mentioned brand names and registered trademarks are used for explanation only; there is no affiliation between our company and the brands named.
TS16-IL10UN WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the IL10UN chipbreaker for reliable machining of stainless steel; this insert provides stable chip control and extended tool life. Order the insert directly via Metav Werkzeuge or contact the consultants for material‑specific guidance. TS16-IL10UN WMP32G turning insert — Tiger‑tec Gold coating, IL10UN chipbreaker (Walter Tools) A TS16-IL10UN WMP32G turning insert designed for machining stainless steel under medium to robust cutting conditions Tiger‑tec Gold coating for wear resistance Optimised IL10UN chipbreaker for reliable chips Suitable for stainless steel (ISO M) applications Coated carbide substrate for extended tool life Performance where stainless steel challenges occur The TS16‑IL10UN WMP32G indexable insert combines a coated carbide substrate with Tiger‑tec Gold technology to address the common difficulties of machining stainless steel, such as high ductility and heat generation. The coating reduces adhesive wear and supports a stable cutting edge, which translates into fewer interruptions and more predictable cycle times. By selecting an insert tailored to the M material group, shops secure a balance between cutting reliability and cost per component that benefits serial production and job‑shop environments. Consistent chip control to reduce rework The IL10UN chipbreaker is engineered to produce short, uniform chips when cutting tough, ductile materials, improving evacuation and minimising built‑up edge. Stable chip formation leads directly to better surface finish and reduces secondary operations. Process efficiency gains stem from fewer tool changes and less manual chip clearing, while the consistent cutting behaviour supports repeatable part quality across batches. Process security and longer service intervals The combination of a robust substrate and advanced coating provides higher resistance to flank and crater wear, supporting process security in continuous production. This enables longer tool life and steadier machining performance, which helps to lower overall tooling costs and improve uptime. The insert’s geometry and chip control are designed to work reliably across typical stainless steel operations, making it a pragmatic choice for manufacturers aiming for dependable productivity. For application advice, toolholder compatibility or supply, contact Metav Werkzeuge for tailored recommendations and immediate availability at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: TS16-IL10UN-WMP32G-WALTER Designation: TS16-IL10UN WMP32G Manufacturer: Walter Tools Facts Series: Tiger‑tec Gold Grade / Sort: WMP32G Chipbreaker: IL10UN Material group: M (stainless steel applications) Special features Coating: Tiger‑tec Gold (coated carbide) Substrate: coated cemented carbide Application: machining of stainless steel Product type: turning indexable insert FAQ Is this insert suitable for machining stainless steel? Yes. The TS16‑IL10UN WMP32G is formulated for ISO M materials and combines a coated carbide substrate with Tiger‑tec Gold technology to support stable machining of stainless steel. What benefit does the IL10UN chipbreaker provide? The IL10UN chipbreaker produces controlled, short chips in ductile materials, improving evacuation and helping to maintain surface quality while reducing the risk of built‑up edge. Can this insert be used for heavy roughing operations? The Walter Tools grade WMP32G is intended for medium to robust conditions on stainless steel; selection for heavy roughing should consider cutting parameters and toolholder rigidity to ensure process security. What distinguishes Tiger‑tec Gold in daily production? Tiger‑tec Gold coating enhances wear resistance and thermal stability, which helps to extend tool life and maintain a consistent cutting edge during longer runs. Which toolholders accept the TS16 geometry? The insert uses the TS16 geometry; it fits toolholders designed for TS16‑type turning inserts. Verify seat and clamping compatibility before assembly. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) is part of the Sandvik group. Protected trademarks and trade names are mentioned solely for clarification. No connection between our company and the named brands is implied. The offered item is original, brand‑new merchandise from the manufacturer.
TS16-IL11W WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WMP32G carbide grade and an optimised IL11W chipbreaker for reliable turning of rostfreier Stahl; order directly via Metav Werkzeuge or contact our consultants for application support. TS16-IL11W WMP32G – indexable turning insert for rostfreier Stahl, Tiger‑tec Gold, IL11W chipbreaker (Walter Tools) A TS16-IL11W WMP32G indexable insert engineered for consistent performance when machining rostfreier Stahl under medium to robust cutting conditions. Tiger‑tec Gold coating for enhanced wear resistance Optimised IL11W chipbreaker for stable chips WMP32G coated carbide suited to rostfreier Stahl Consistent edge life for productive turning Reliable wear resistance that stabilises production The combination of Tiger‑tec Gold technology and the WMP32G coated carbide provides predictable wear resistance and improved thermal stability during turning operations. Coated carbide means a hard substrate with a multi-layer surface finish that resists abrasion and oxidation at elevated temperatures; this results in longer tool life and fewer interruptions in the production cycle. For machining rostfreier Stahl, which tends to be tough and heat‑sensitive, that stability translates into reduced rework and steadier cycle times. Improved chip control and surface quality An IL11W chipbreaker optimised for rostfreier Stahl ensures controlled chip formation and evacuation, reducing the risk of built‑up edge and component damage. Stable chip control lowers the likelihood of entanglement and tool interference, supporting safer automated processes and consistent component surfaces. The insert geometry and chipbreaker pairing are designed to promote a uniform cut, which helps achieve better surface finish with fewer secondary operations. Productivity gains through consistent edge life This grade supports medium to robust cutting parameters, enabling higher material removal rates while maintaining edge life. The predictable performance reduces the need for frequent tool changes and simplifies inventory planning for production workshops. Machinists and manufacturing engineers benefit from a repeatable turning solution that balances productivity with surface integrity, making it suited to short- and long‑run operations where process security and throughput matter. Contact Metav Werkzeuge for tailored cutting data and application advice on Walter Tools Tiger‑tec Gold inserts Technical Data Article number: TS16-IL11W-WMP32G-WALTER Product: Drehwendeschneidplatte / indexable turning insert Designation: TS16-IL11W WMP32G Manufacturer: Walter Tools Core data Material group: M (rostfreie Stähle) Chipbreaker: IL11W Grade: WMP32G Series: Tiger‑tec Gold Special features Coated carbide grade (Tiger‑tec Gold technology) Designed for rostfreier Stahl machining Stable chip formation and edge life FAQ What materials is this insert intended for? The TS16-IL11W WMP32G insert is specified for rostfreier Stahl (ISO group M), offering secure chip formation and thermal behaviour suited to those alloys. How does the IL11W chipbreaker improve machining? The IL11W chipbreaker promotes controlled chips and reduced built‑up edge, which improves process stability and surface quality when cutting rostfreier Stahl with this Walter Tools insert. What does Tiger‑tec Gold bring to the application? Tiger‑tec Gold is a coating technology that enhances wear resistance and heat protection for the WMP32G grade, resulting in longer tool life and consistent performance in production turning. Is this insert suitable for automated turning cells? Yes, the WMP32G grade and IL11W chip control are designed to deliver repeatable performance and safe chip behaviour, making the insert appropriate for automated and high‑volume operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are cited for explanatory purposes only and do not imply any connection between our company and the named brands. The offered item is an original factory‑new product of Walter Tools.
TS16-IL12UN WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G coated-carbide grade for stable chip formation and extended tool life in rostfreier Stahl applications; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TS16-IL12UN WMP32G — Indexable turning insert with Tiger·tec Gold coating, Walter Tools The TS16-IL12UN WMP32G is an indexable turning insert designed for machining rostfreier Stahl under medium to robust cutting conditions, offering optimised chip control and durable cutting edges. Tiger·tec Gold coating for extended tool life Optimised chip control for rostfreier Stahl machining Coated carbide grade WMP32G for robust cutting Reliable performance in medium to heavy conditions Consistent cutting in demanding rostfreier Stahl work The insert delivers predictable performance when machining rostfreier Stahl, a material class known for toughness and a tendency to form built-up edge. The WMP32G grade combines a coated carbide substrate with a tailored coating architecture that supports stable cutting edges and secure chip formation. This stability reduces unexpected tool changes and contributes to a more reliable production flow, making the insert suitable for shop floors requiring repeatable results under challenging thermal conditions. Coating technology that prolongs tool life and process reliability The Tiger·tec Gold technology focuses on wear resistance and thermal stability, improving service life in cyclic or abrasive rostfreier Stahl operations. By limiting flank wear and preserving the cutting edge, the coating helps maintain dimensional accuracy over longer tool life. The result is fewer interruptions for tool replacement and a more consistent surface finish on turned components, which supports higher overall process efficiency. Designed chip control for safer machining and fewer rejects Equipped with the IL12UN chipbreaker, this insert promotes controlled chip formation even when cutting tough stainless alloys. Controlled chips lower the risk of surface damage and machine stoppages, and they simplify chip handling. For production environments where cycle time and component quality are critical, this focused chip management contributes directly to reduced scrap rates and improved throughput. Practical application guidance for integration into turning operations As part of the Tiger·tec Gold series and classified under the M material group, this insert is optimised specifically for rostfreier Stahl applications and medium to heavy cutting regimes. When integrating the grade into existing machining setups, pairing the insert with appropriate cutting parameters and toolholders suited to robust turning will maximise the benefits of the WMP32G composition and the IL12UN chipbreaker. The insert is a reliable choice for workshops aiming for consistent, repeatable performance on stainless components. Contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss the TS16-IL12UN WMP32G and secure the right configuration for specific rostfreier Stahl applications Technical Data Article number: TS16-IL12UN-WMP32G-WALTER Name: Indexable turning insert TS16-IL12UN WMP32G Walter Tools Manufacturer: Walter Tools Facts Material group: M (rostfreier Stahl) Series: Tiger·tec Gold Special features Grade: WMP32G (coated carbide) Chipbreaker: IL12UN Application: medium to robust conditions for rostfreier Stahl FAQ What materials is this insert suitable for? The TS16-IL12UN WMP32G insert and the Walter Tools Tiger·tec Gold series are designed for rostfreier Stahl, offering reliable chip formation and cutting-edge stability for stainless applications. What advantage does the Tiger·tec Gold coating provide? Tiger·tec Gold enhances wear resistance and thermal stability on the WMP32G grade, helping the insert maintain cutting performance and extend tool life in rostfreier Stahl turning. How does the IL12UN chipbreaker affect machining? The IL12UN chipbreaker on this indexable turning insert promotes controlled chips, which reduces the risk of surface damage and supports uninterrupted production cycles when machining rostfreier Stahl. Is this insert suitable for heavy-duty turning operations? Yes, the WMP32G grade and Tiger·tec Gold series are intended for medium to robust cutting conditions, making the insert appropriate for demanding rostfreier Stahl applications. Can the insert maintain dimensional accuracy over long runs? The coated-carbide composition and the Tiger·tec Gold coating support stable cutting edges and reduced flank wear, which contributes to consistent dimensional accuracy during extended production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only and do not indicate any affiliation between our company and the named manufacturers. The offered article is original, brand‑new goods from the manufacturer.
TS16-IL14UN WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP22G grade for reliable machining of stainless steel; the IL14UN chipbreaker supports stable chip control and predictable tool life. Order the insert directly via Metav Werkzeuge or ask our consultants for application advice. TS16-IL14UN TS16-IL14UN WMP22G — Turning indexable insert for stainless steel | Walter Tools A TS16-IL14UN WMP22G turning insert engineered for consistent performance when machining stainless steel under medium to robust cutting conditions. Tiger·tec Gold coating for enhanced wear resistance Optimised for stainless steel machining IL14UN chipbreaker for controlled chip formation Coated carbide grade WMP22G for robust cutting Reliable performance for challenging stainless steel jobs The insert delivers consistent cutting results thanks to the WMP22G coated carbide grade and the Tiger·tec Gold technology. The combination ensures stable chip formation and a durable cutting edge when working with the tough, heat‑sensitive properties of stainless steel. As a consequence, cycle times remain predictable and rework due to built‑up edge is reduced, supporting higher throughput in production environments. Coating and grade explained for process security The Tiger·tec Gold coating enhances thermal resistance and reduces flank wear, while the WMP22G grade is formulated for coated carbide performance. The IL14UN chipbreaker promotes short, manageable chips and improves surface finish in many turning operations. These features together provide a balance of wear resistance and edge stability that increases confidence in repeatable part quality without complicated parameter adjustments. Practical advantages on the shop floor As an indexable turning solution, the insert simplifies tool handling and replacement compared with brazed or solid tools. The geometry and chipbreaker design reduce the need for manual chip control measures, which improves machine uptime and operator safety. For production planners, the combination of coated carbide and a purpose‑built chipformer means fewer insert changes and more time spent machining parts rather than swapping tooling. For reliable machining of stainless steel with the TS16-IL14UN WMP22G insert, contact Metav Werkzeuge for application guidance and stock availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TS16-IL14UN-WMP22G-WALTER Label: Drehwendeschneidplatte TS16-IL14UN WMP22G Walter Tools Manufacturer: Walter Tools Type: Turning indexable insert Grade: WMP22G Series: Tiger·tec Gold Chipbreaker: IL14UN Material group: M (stainless steel) Numbers / Facts No numerical specifications provided Special features Coating: Tiger·tec Gold Material: Coated carbide Suitable for: stainless steel Chip control: IL14UN chipbreaker Application focus: medium to robust cutting conditions Story trigger: wendeplatten FAQ What materials is this insert suitable for? The TS16-IL14UN WMP22G insert from Walter Tools is specified for machining stainless steel and is designed for medium to robust cutting conditions. What does the WMP22G grade offer? WMP22G is a coated carbide grade within the Tiger·tec Gold family that provides improved wear resistance and edge stability for demanding stainless steel applications. How does the IL14UN chipbreaker help in practice? The IL14UN chipbreaker on this insert promotes stable, short chips and consistent chip flow, improving surface finish and reducing interruptions during turning. Is this insert suitable for high‑speed turning? The combination of the Tiger·tec Gold coating and the WMP22G grade supports elevated thermal resistance; suitability for high‑speed operations depends on machine setup and cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-IL14UN WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger-tec Gold coating, the WMP32G carbides and reliable IL14UN chip control for consistent performance when machining stainless steel; order or request application support via Metav Werkzeuge for rapid advice and availability. TS16-IL14UN WMP32G – indexable turning insert, Tiger-tec Gold, suited for stainless steel (Walter Tools) The TS16-IL14UN WMP32G is an indexable turning insert from the Tiger-tec Gold series designed to deliver stable cutting performance and secure chip formation in medium to robust conditions when machining stainless steel. Tiger-tec Gold coating for edge stability Designed for stainless steel machining WMP32G coated carbide grade Stable chip formation under demanding cuts Reliable performance for stainless steel components The Tiger-tec Gold series combines a tailored coating and substrate chemistry to reduce built-up edge and maintain a stable cutting geometry in demanding applications. The WMP32G grade is a coated carbide developed specifically for stainless steel, where material toughness and heat generation require a combination of wear resistance and toughness. This translates into predictably consistent cutting forces and improved surface integrity, so the insert contributes directly to lower rework rates and steady production output. Better chip control and longer tool life through optimised geometry The IL14UN chipbreaker geometry supports controlled chip formation across a range of feeds and depths of cut, reducing the risk of entangling chips and enabling safer, more efficient machining cycles. The interaction of chipbreaker and coating helps to disperse heat and protect the cutting edge, resulting in extended tool life and fewer index changes. For production environments, that means less downtime and better cost-efficiency per component without sacrificing finish quality. Practical integration into production workflows This indexable insert is compatible with standard tool holders specified for its ISO designation, simplifying introduction into existing turning processes. The combination of a robust coated substrate and a proven chipformer makes the insert suitable for shops seeking dependable results on stainless steel components, from prototype batches to series production. Application guidance is available to define cutting data and optimise parameters for individual machines and setups, ensuring that productivity gains are realised quickly. For reliable machining of stainless steel with Tiger-tec Gold, contact Metav Werkzeuge for tailored application advice, availability and delivery options. Technical data Article number: TS16-IL14UN-WMP32G-WALTER Product type: Drehwendeschneidplatte Brand: Walter Tools Series: Tiger-tec Gold Grade: WMP32G ISO designation: TS16-IL14UN WMP32G Chipbreaker: IL14UN Material: coated carbide Core data Material group: M (rostfreie Stähle) Suitable machining conditions: medium to robust Coating technology: Tiger-tec Gold Special features Optimised for stainless steel machining Stable chip formation with IL14UN chipbreaker Coated carbide for wear resistance and edge security Designed for consistent productivity in turning applications FAQ What materials is this insert intended for? The TS16-IL14UN WMP32G is specified for stainless steels (material group M) and is optimised to handle the toughness and heat characteristics of such alloys. How does the Tiger-tec Gold technology benefit production? Tiger-tec Gold coating on the WMP32G grade improves wear resistance and edge stability, which helps to extend insert life and maintain surface quality across longer tool cycles. Is the IL14UN chipbreaker suitable for mixed batch sizes? Yes, the IL14UN chipbreaker provides controlled chip formation across a range of feeds and depths of cut, making the insert adaptable from small batches to series production while keeping chip control consistent. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarks and registered names are the property of their respective owners. Brand names are mentioned for clarification only; there is no commercial affiliation implied. The offered item is an original, new product from the named manufacturer.
TS16-IL14W WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for reliable chip control and extended tool life when machining stainless steels; the insert is designed for medium to robust turning applications and supports a productive cutting process. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. TS16-IL14W WMP32G – Indexable turning insert with Tiger·tec Gold for stainless steels | Walter Tools The TS16-IL14W WMP32G is a coated indexable turning insert engineered for secure chip formation and consistent performance when machining stainless steels under medium to robust cutting conditions. Tiger·tec Gold coating for long life Optimised for stainless steels IL14W chipbreaker for stable chips Reliable edge retention in robust cuts Consistent productivity through controlled chip formation The combination of the WMP32G grade and the IL14W chipbreaker delivers stable chip formation, reducing unexpected interruptions and improving cycle times in serial turning operations. As a coated carbide insert, the Tiger·tec Gold surface treatment enhances thermal resistance and wear behaviour, so the cutting edge stays more consistent over longer tool paths. This technical pairing is especially advantageous where stainless steels produce sticky, heat‑sensitive chips; the design focuses on predictable chip flow and less rework at downstream processes. More reliable results and longer edge life for stainless turning The insert’s coating technology and cutting grade aim to limit micro‑welding and build‑up on the edge, which are common issues with austenitic and other stainless steels. The result is improved surface finish and fewer in‑process adjustments. The specification targets workshops seeking a balance between productivity and process security: the grade supports stable wear patterns and predictable regrinding intervals, translating into lower machine downtime and consistent component quality. Practical application guidance and workshop benefits Designed for turning tasks that require robust performance, the insert is suitable for a range of operations from semi‑finishing to heavier cuts in stainless steels. The IL14W geometry promotes controllable chip shapes that are easier to evacuate, which helps maintain safe cutting conditions and reduces secondary handling. For selection, match the insert grade with the workpiece alloy and machining parameters; the Tiger·tec Gold grade is a solid first choice where elevated temperatures and tough chip behaviour are expected. For further machining data or process recommendations, Metav Werkzeuge’s technical team can provide tailored guidance. For application-specific recommendations and fast supply of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for expert support and ordering assistance. Technical Data Article number: TS16-IL14W-WMP32G-WALTER Product designation: TS16-IL14W WMP32G (indexable turning insert) Manufacturer: Walter Tools Grade / series: Tiger·tec Gold Chipbreaker: IL14W Material group suitability: stainless steels Core data No numerical specifications provided in the source data Special features Coated carbide grade WMP32G Optimised for stable chip formation Suitable for medium to robust cutting conditions Part of the Tiger·tec Gold range Designed for reliable edge retention FAQ Which materials is this insert suitable for? The TS16-IL14W WMP32G is optimised for machining stainless steels, addressing the high ductility and heat sensitivity typical of these alloys. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold enhances thermal stability and wear resistance, which improves edge life and process security when using the WMP32G grade. How does the IL14W chipbreaker affect machining? The IL14W chipbreaker promotes controlled chip shapes and evacuation, reducing the risk of built‑up edge and improving surface quality in turning operations. Is this insert suitable for both finishing and heavier cuts? Yes, the insert is designed for a range of turning operations from semi‑finishing to more robust cutting scenarios in stainless steels. How should the insert be selected for a specific turning task? Choose the WMP32G grade where stainless steels and elevated cutting temperatures are present; match feed and depth of cut to the recommended parameters for the workpiece alloy and toolholder. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-IL16UN WMP22G Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Gold coating and the WMP22G grade, this indexable turning insert ensures reliable performance when machining stainless steels under medium to robust conditions; the IL16UN chipbreaker supports stable chip formation and secure cutting edges. Order the insert directly via Metav Werkzeuge or consult our technical advisers for application support. TS16-IL16UN WMP22G – Indexable turning insert with Tiger·tec Gold coating (Walter Tools) A TS16-IL16UN WMP22G insert designed for precision turning of stainless steel components in demanding workshop and production environments Tiger·tec Gold coating for enhanced wear resistance Optimised IL16UN chipbreaker for stable chip control Designed for stainless steel (ISO M) applications Increase process reliability when turning stainless steels The coated carbide composition in this indexable plate delivers a consistent cutting performance when machining stainless steels. The WMP22G grade, developed within the Tiger·tec Gold range, is formulated to reduce edge build-up and support secure chip formation even where heat and material toughness challenge cutting conditions. For production-oriented operations, this means fewer interruptions for edge changes and a steadier output quality over longer tool life. Achieve repeatable surface quality and longer edge life A combination of coating technology and carbide substrate gives a fine balance between hardness and toughness. The Tiger·tec Gold coating contributes to improved wear resistance, reducing flank wear and helping to maintain the cutting geometry. As a result, the insert supports reproducible surface finishes on turned parts and extends the intervals between index changes, benefiting throughput and reducing downtime in serial machining. Confident chip control with the IL16UN geometry The integrated IL16UN chipbreaker is designed to control chips produced from stainless grades that tend to be ductile and form long, stringy swarf. By promoting predictable chip segmentation and evacuation, the chipbreaker helps to avoid entanglement and reduces the risk of workpiece surface damage. This targeted geometry therefore supports both operational safety and consistent part quality in demanding turning cycles. Practical use and material applicability Classified for the ISO group M, this insert is intended specifically for stainless steels, which commonly present high heat generation and a tendency to form built-up edge. The selection of WMP22G within the Tiger·tec Gold family provides a robust solution for medium to heavy-duty turning tasks on these materials. The result is a reliable compromise between cutting edge stability and resistance to abrasive and adhesive wear mechanisms. For technical guidance or to secure the TS16-IL16UN WMP22G from Walter Tools with professional support, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and availability Technical data Article number: TS16-IL16UN-WMP22G-WALTER Designation: TS16-IL16UN WMP22G Manufacturer: Walter Tools Numbers / Core technical data Material group: M (stainless steels) Grade: WMP22G Series: Tiger·tec Gold Special features / Versions Chipbreaker: IL16UN Coating technology: Tiger·tec Gold Tool type: indexable turning insert Brand: Walter Tools FAQ What materials is this insert suitable for? The TS16-IL16UN WMP22G is designated for stainless steels (ISO group M) and is formulated to manage the toughness and heat-generating characteristics of those materials. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating enhances wear resistance and helps to maintain a stable cutting edge on the WMP22G grade, leading to longer intervals between index changes and more consistent surface finishes. What is the role of the IL16UN chipbreaker? The IL16UN chipbreaker promotes controlled chip formation and evacuation when machining ductile stainless steels, reducing the risk of long swarf and potential surface damage. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-IL16UN WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WMP32G grade for consistent chip formation and extended tool life in stainless steel turning; order the insert directly via Metav Werkzeuge or consult their specialists for application support. TS16-IL16UN WMP32G indexable turning insert – Tiger‑tec Gold, for stainless steels (M) by Walter Tools TS16-IL16UN WMP32G is an indexable turning insert designed for reliable performance in stainless steel machining, featuring a dedicated chipbreaker for controlled chips and a coated carbide grade tuned for medium to robust cutting conditions. Tiger‑tec Gold coated carbide grade WMP32G Dedicated chipbreaker IL16UN for chip control Optimised for stainless steels (ISO group M) Stable cutting edge for medium to robust conditions Greater productivity through controlled chip formation The combination of the WMP32G coated carbide and the IL16UN chipbreaker ensures reproducible chip shapes and predictable evacuation when turning stainless steels. This leads to fewer interruptions for chip clearing and reduces downtime on demanding components. The coating technology Tiger‑tec Gold supports higher cutting speeds under elevated temperatures, enabling a balance of productivity and process security without sacrificing surface integrity. Longer tool life and process stability for demanding materials A coated carbide grade designed for the M group delivers improved wear resistance and a more stable cutting edge in the face of material adhesion and thermal loads. The insert’s composition and coating reduce the tendency for built‑up edge formation, which in turn preserves dimensional accuracy and prolongs service intervals. For workshops seeking consistent batch quality, the result is enhanced throughput with fewer tool changes and stable part finishes. Practical integration and machining guidance The ISO designation TS16-IL16UN WMP32G denotes the insert geometry and chipbreaker combination; this makes selection straightforward for standard turning holders that accept TS16‑style inserts. When machining stainless steels, pairing the insert with appropriate coolant, moderate feeds and slightly higher cutting speeds than uncoated grades will promote the best compromise between tool life and surface finish. For mixed production runs or tougher stainless grades, the insert supports a reliable response to varying cutting conditions. Choose Walter Tools Tiger‑tec Gold inserts for robust stainless‑steel turning and contact Metav Werkzeuge for tailored advice or supply — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: TS16-IL16UN-WMP32G-WALTER SKU: TS16-IL16UN-WMP32G-WALTER Product type: Drehwendeschneidplatte (indexable turning insert) Facts Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: IL16UN Material group: M (stainless steels) Special features Coated carbide grade (Tiger‑tec Gold) Designed for medium to robust cutting conditions Stable chip formation and edge life ISO designation: TS16-IL16UN WMP32G FAQ What materials is this insert suitable for? The TS16-IL16UN WMP32G insert is optimised for stainless steels (ISO group M) and is specified for medium to robust cutting conditions where controlled chip formation is required. How does the Tiger‑tec Gold coating benefit machining? The Tiger‑tec Gold coating on the WMP32G grade improves heat resistance and wear performance, helping to maintain a stable cutting edge and consistent surface quality during stainless‑steel turning. Which chipbreaker is fitted and why does it matter? The insert features the IL16UN chipbreaker, designed to produce predictable, compact chips during turning, reducing the risk of entanglement and easing handling in automated or manual operations. Is this insert compatible with standard TS16 holders? The ISO designation TS16-IL16UN WMP32G indicates compatibility with toolholders that accept TS16‑format inserts; ensure the holder seat and clamping match the TS16 specifications for correct seating and secure clamping. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) is part of the Sandvik group and is a leading manufacturer of precision tools for metalworking. Protected trademarks and trade names remain the property of their respective owners. The mentioned brand names are used for explanatory purposes only. The offered item is an original, factory‑new product from the manufacturer.
TS16-IL18UN WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the IL18UN chipbreaker for consistent machining of stainless steels; precise chip control and long tool life support efficient production. Order genuine Walter Tools inserts or consult Metav Werkzeuge for application-specific cutting data. TS16-IL18UN WMP32G indexable turning insert for stainless steels — Walter Tools The TS16-IL18UN WMP32G is an indexable turning insert engineered for reliable finishing and semi-rough turning of stainless steels under moderate to robust cutting conditions, offering a balance of wear resistance and secure chip formation. Tiger·tec Gold coating for long tool life Optimised IL18UN chipbreaker for stable chips Designed for stainless steels (material group M) Improved process security and consistent productivity The combination of a coated carbide grade and the Tiger·tec Gold technology provides measurable advantages in process reliability. The insert’s ceramic-enhanced coating improves thermal resistance and reduces adhesive wear, which leads to longer tool life and fewer interruptions for index changes. For workshops processing a range of ferritic and austenitic alloys, the grade WMP32G supports stable cutting-edge behaviour, helping to maintain cycle times and reduce variability in component quality. This results in fewer reworks and a steadier manufacturing flow. Predictable chip control and superior surface outcomes An optimised chipformer such as IL18UN delivers consistent chip segmentation when machining materials that tend to produce long, stringy swarf. The tailored geometry encourages short, curled chips that evacuate reliably, reducing heat build-up at the cutting edge and protecting the workpiece surface. As a result, operators benefit from improved surface finish and easier handling of chips at the machine, which contributes to safer, more efficient shifts and less manual intervention during production. Economical tool life with application-focused grade The grade WMP32G is a coated hardmetal composition tuned for stainless steels and is intended for medium to robust operating conditions. Its wear behaviour and edge stability make it suitable where repeated, accurate performance is required; this supports predictable tooling schedules and lower tooling costs per component. Specifying genuine Walter Tools inserts also facilitates repeatable tool set-ups and consistent batch results, which is valuable for quality-sensitive production environments and for meeting delivery commitments. For tailored cutting data or to secure genuine Walter Tools Tiger·tec Gold inserts such as the TS16-IL18UN WMP32G, contact Metav Werkzeuge for expert recommendations and availability: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: TS16-IL18UN-WMP32G-WALTER Article: TS16-IL18UN WMP32G Product type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Chipbreaker: IL18UN Core characteristics Material group: M Suitable for: stainless steel Coating technology: Tiger·tec Gold Grade: WMP32G Special features Coated carbide cutting grade Optimised IL18UN chipbreaker for stable chips Designed for moderate to robust cutting conditions Indexable insert format TS16-IL18UN FAQ What materials is this insert suitable for? The TS16-IL18UN WMP32G is designed primarily for stainless steels (material group M) and supports secure chip formation and edge stability when processing austenitic and other rust‑resistant alloys. How does the Tiger·tec Gold technology benefit production? Tiger·tec Gold improves thermal resistance and wear behaviour on the WMP32G grade, which leads to longer tool life and increased process security with fewer tool changes and more consistent part quality. What role does the IL18UN chipbreaker play? The IL18UN chipbreaker on this indexable insert promotes short, controllable chips when machining stainless steels, improving evacuation, reducing heat at the edge and enhancing surface finish. Is this an original Walter Tools product? Yes, the TS16-IL18UN WMP32G is an original Walter Tools indexable turning insert and is supplied as factory-new by the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the mentioned brands. The offered article is original, factory-new goods of the manufacturer (Walter Tools).
TS16-IL19W WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold combination of stable chip formation and high wear resistance to increase productivity in turning of stainless steel, while benefiting from the proven WMP32G grade for medium to robust conditions; order directly via Metav Werkzeuge or consult our specialists for application support. TS16-IL19W WMP32G turning insert — coated carbide for stainless steel by Walter Tools The TS16-IL19W WMP32G is a coated turning insert designed for secure chip control and robust performance when machining stainless steel in medium to heavy turning operations Tiger·tec Gold coating for high wear resistance WMP32G grade for stainless steel IL19W chipbreaker for secure chip control Stable cutting edge for productive turning Consistent performance under demanding conditions The TS16-IL19W WMP32G insert is specified for machining stainless steel and benefits from a purpose-designed, coated carbide substrate that stabilises the cutting edge under elevated temperatures. The WMP32G grade, integrated into the Tiger·tec Gold family, supports reliable chip formation and reduces the incidence of build-up on the cutting edge. For production environments seeking repeatable results, this combination delivers improved process security and predictable tool life. The resulting effect is fewer interruptions for tool changes and more consistent component quality. Better chip control and surface quality for turning processes Equipped with the IL19W chipbreaker, this insert promotes controlled chip evacuation and reduces the risk of entanglement or irregular chip shapes that can affect surface finish. The established chip geometry aids in breaking and directing chips away from the workpiece, which in turn helps to maintain a smoother cutting action and reduces thermal loads on the edge. As a consequence, operators can expect an improvement in surface integrity and a reduced need for secondary finishing, translating into cost and time savings on series production. Practical integration and material adaptability Designed for compatibility with standard turning toolholders, the insert offers straightforward integration into existing machine setups and tool systems. The coated carbide construction of the WMP32G grade increases resistance to flank and crater wear, which is particularly beneficial when machining tough, austenitic stainless steels that generate high heat and tend to form built-up edge. For applications requiring productivity and predictable results, this solution supports stable cutting conditions and consistent workpiece tolerances while simplifying grade selection for stainless steel tasks. Contact Metav Werkzeuge for tailored application advice, availability and to discuss matching toolholders for Walter Tools Tiger·tec Gold inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: TS16-IL19W-WMP32G-WALTER Name: Drehwendeschneidplatte TS16-IL19W WMP32G Walter Tools Manufacturer: Walter Tools Facts SKU: TS16-IL19W-WMP32G-WALTER Material group: M Suitable for: stainless steel Special features Series: Tiger·tec Gold Grade: WMP32G (coated carbide) Chipbreaker: IL19W Product type: Drehwendeschneidplatte FAQ Is this insert suitable for machining stainless steel? Yes. The TS16-IL19W WMP32G from Walter Tools is specified for stainless steel and the WMP32G grade supports secure chip formation under the material’s demanding conditions. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WMP32G grade improves wear resistance and thermal stability, which helps to extend tool life and maintain cutting-edge integrity during continuous turning. Which applications are recommended for this insert? The insert is intended for medium to robust turning operations in stainless steels where stable edge life and reliable chip control are required. What does the IL19W chipbreaker achieve in practice? The IL19W chipbreaker promotes predictable chip fragmentation and evacuation, lowering the risk of entanglement and improving surface finish during turning. Can the insert be used with standard turning holders? Yes. The TS16-IL19W WMP32G is designed for integration with conventional turning toolholders compatible with this insert designation. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
TS16-IL2.0ISO WMP32G Wendeplatten - Walter Tools
Benefit from enhanced chip control and longer tool life thanks to the combination of the Tiger‑tec Gold grade and the IL2.0ISO chipbreaker. The insert delivers stable cutting in stainless steels while reducing downtime through consistent edge performance. Order directly through Metav Werkzeuge or contact their consultants for application advice. TS16-IL2.0ISO WMP32G indexable turning insert — Tiger‑tec Gold, for stainless steel (Walter Tools) TS16-IL2.0ISO WMP32G is a coated carbide indexable turning insert developed for stable machining of stainless steels in medium to robust cutting conditions Tiger‑tec Gold coating for durable performance IL2.0ISO chipbreaker for controlled chips Optimised for machining stainless steels Consistent chip control for stainless steels The combination of the IL2.0ISO chipbreaker and the WMP32G grade enables reliable chip formation when machining austenitic and other stainless steels. Materials in group M tend to be tough, sticky and generate heat; the insert’s geometry and coating promote short, manageable chips and reduce the risk of built‑up edge. For process planners this means a more predictable cut, fewer interruptions and improved surface results compared with older, unoptimised grades. Longer cutting life and reduced tool changes Built on the Tiger‑tec Gold technology, this coated carbide insert offers enhanced wear resistance and a stable cutting edge for sustained performance under demanding conditions. The coated substrate supports consistent edge integrity, which translates into fewer tool changes and higher productivity on serial and jobbing work. Where downtime is costly, the combination of coating and chip control contributes directly to lower machining costs and better machine utilisation. Practical use and integration in the workshop The insert is intended for use in standard indexable turning toolholders that accept the TS16 form; it is optimised for turning stainless steels in medium to robust applications and supports conventional cutting strategies. When introducing the insert into a new process, allow for fine tuning of feeds and speeds to match material grade and part geometry. For customers seeking specific cutting parameters or holder recommendations, technical advice is available to ensure the insert matches the intended machining scenario. Contact Metav Werkzeuge for tailored application support or to order TS16-IL2.0ISO WMP32G inserts from the Tiger‑tec Gold range and secure the right supply and setup for stainless steel turning. Technical Data SKU: TS16-IL2.0ISO-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-IL2.0ISO WMP32G Walter Tools Product type: indexable turning insert Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: IL2.0ISO Suitable material group: M (stainless steel) Manufacturer: Walter Tools Facts No dimensional data provided in the source Special features Coated carbide grade (Tiger‑tec Gold technology) Designed for stable chip formation in stainless steels Suited to medium to robust cutting conditions Part of the Tiger‑tec Gold series Manufacturer: Walter Tools FAQ What materials is this insert designed for? The TS16-IL2.0ISO WMP32G insert is designed primarily for stainless steels (ISO group M), where its geometry and coating support reliable chip formation. What does the IL2.0ISO chipbreaker do? The IL2.0ISO chipbreaker on the WMP32G grade helps generate short, controllable chips during turning operations, improving process stability when using the TS16-IL2.0ISO WMP32G insert. How does the Tiger‑tec Gold technology benefit machining? Tiger‑tec Gold provides enhanced wear resistance and a stable cutting edge, which extends the service life of the TS16-IL2.0ISO WMP32G insert and reduces frequency of tool changes. Is this insert suitable for heavy roughing or finishing? The TS16-IL2.0ISO WMP32G is intended for medium to robust conditions; process tuning will determine suitability for heavy roughing or fine finishing depending on material and setup. Can cutting data be provided for specific stainless steel grades? Application‑specific cutting data can be supplied; for tailored recommendations relating to the TS16-IL2.0ISO WMP32G insert, please request technical guidance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
TS16-IL2.5ISO WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WMP32G grade for secure chip formation and consistent edge life when machining stainless steel; this results in more stable cycle times and predictable productivity. Order the insert through Metav Werkzeuge or consult our technical team for application-specific advice. TS16-IL2.5ISO WMP32G indexable turning insert — Tiger‑tec Gold for stainless steel (Walter Tools) A TS16-IL2.5ISO WMP32G indexable turning insert engineered to deliver stable cutting-edge performance and reliable chip control in the machining of stainless steels under medium to robust cutting conditions Tiger‑tec Gold coating technology WMP32G grade for stainless steel IL2.5ISO chipbreaker for stable chips Consistent edge life and process security Boost turning productivity on stainless steel The combination of a coated carbide substrate and the Tiger‑tec Gold technology is designed to reduce unexpected tool changes and maintain part quality. The insert’s WMP32G composition supports secure chip formation when working with stainless steels (ISO group M), materials that typically generate high heat and can weld to the cutting edge. Reliable edge behaviour reduces unplanned downtime and helps sustain consistent spindle utilisation, making the insert an efficient choice for serial production and demanding single‑piece runs. Achieve predictable chip control and surface quality Equipped with the IL2.5ISO chipbreaker, this indexable insert focuses on producing manageable chip forms and minimising built‑up edge during turning operations. Good chip control lowers the risk of surface damage and tool interference in the tool zone, which in turn improves part finish and reduces secondary operations. For workshops with mixed runs, the insert’s design supports repeatable performance across differing cut depths, so set‑up variation has less impact on production stability. Reduce process variation with a robust cutting solution The insert’s engineering concentrates on process security and extended edge life rather than short bursts of high removal rate. As a result, the insert supports steady machining in applications where tool life consistency and re‑grinding intervals are critical cost drivers. Leveraging a grade optimised for stainless steel ensures that the cutting edge remains stable under thermal and mechanical loads, which contributes to fewer scrap parts and more reliable throughput in both prototype and volume production environments. Easy integration and selection guidance for workshops The ISO designation and concise chipbreaker coding simplify the selection of a suitable insert for existing toolholders. The TS16‑IL2.5ISO format is compatible with standard turning systems that accept this family of inserts, enabling straightforward replacement and inventory management. For customers seeking a close match to specific machining conditions, Metav Werkzeuge’s consultants can recommend the optimal cutting parameters and tooling set‑up to make best use of the WMP32G grade and Tiger‑tec Gold technology. For expert guidance on Walter Tools Tiger‑tec Gold inserts and help in choosing the right TS16‑IL2.5ISO WMP32G solution for specific stainless‑steel applications, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt technical support and ordering assistance Technical data Article number: TS16-IL2.5ISO-WMP32G-WALTER Name: Drehwendeschneidplatte TS16-IL2.5ISO WMP32G Walter Tools Brand: Walter Tools Series: Tiger‑tec Gold Grade: WMP32G Chipbreaker: IL2.5ISO ISO designation: TS16-IL2.5ISO WMP32G Facts Material group designation: M (stainless steel) Intended cutting conditions: medium to robust Coating type: Tiger‑tec Gold technology Special features Coated carbide grade optimised for stainless steels Designed for secure chip formation and stable cutting edge Focus on process security and consistent tool life Suited for serial production and demanding single‑piece machining FAQ What materials is this insert intended for? The TS16‑IL2.5ISO WMP32G insert is formulated for machining stainless steel (ISO group M), where secure chip formation and edge stability are priorities. How does the Tiger‑tec Gold technology help performance? Tiger‑tec Gold provides a coated carbide surface that improves resistance to heat and adhesion, helping the insert maintain a stable cutting edge and longer usable life under challenging stainless‑steel conditions. What role does the IL2.5ISO chipbreaker perform? The IL2.5ISO chipbreaker promotes manageable chip forms and reduces the tendency for built‑up edge, which enhances surface finish and reduces interruptions during turning operations. Is the insert compatible with standard toolholders? The ISO designation TS16‑IL2.5ISO matches common turning systems for that insert family, allowing straightforward replacement in compatible toolholders without adapter changes. Can this insert be used for finishing passes? While optimised for medium to robust cutting, the insert can produce good surface quality when cutting parameters are adjusted for finishing; consult Metav Werkzeuge for parameter recommendations tailored to the application. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Reference to brand names and trademarks is for explanatory purposes only. The offered item is an original, factory‑new product of the manufacturer.
TS16-IL20UN WMP32G Wendeplatten - Walter Tools
Take advantage of the high wear resistance and Tiger·tec Gold coating combined with an optimised IL20UN chipbreaker for reliable machining of stainless steel; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. TS16-IL20UN WMP32G indexable turning insert — Tiger·tec Gold coating for stainless steel The TS16-IL20UN WMP32G is an indexable turning insert developed for dependable performance when machining stainless steel under moderate to robust cutting conditions. Tiger·tec Gold coated carbide Optimised IL20UN chipbreaker geometry Suitable for rostfreie Stähle (material group M) Greater productivity through consistent chip control The combination of the Tiger·tec Gold coating and the WMP32G grade provides improved wear resistance and thermal stability, which translates into longer tool life and fewer indexings. The integrated IL20UN chipbreaker is designed to produce controlled, short chips when cutting stainless steel, reducing the risk of built-up edge and improving surface quality. For manufacturers seeking measurable gains in cycle time, this insert supports steady material removal rates and helps maintain consistent component tolerances over extended runs. Process security and predictable edge life for economical machining A coated carbide substrate in the WMP32G family delivers a balance between toughness and hardness, which helps to protect the cutting edge under fluctuating cutting forces common with rostfreie Stähle. The result is stable edge life and reduced scrap rates, supporting a lower cost per part in batch and serial production. Describing the effect in practical terms: fewer tool changes and more predictable dressing intervals mean improved uptime and planning reliability on the shop floor. Simple application guidance and versatile integration The insert integrates with standard toolholders for indexable turning and is suitable for a range of finishing and medium-turning operations on rostfreie Stähle. The IL20UN chip geometry simplifies chip evacuation and reduces entanglement in long, interrupted cuts. For teams less familiar with insert grades, the Tiger·tec Gold family signifies a coated, high-performance solution optimised for demanding stainless applications; adjustments to feed and speed may be required to match specific alloys and workpiece conditions. Discuss cutting parameters and procurement with Metav Werkzeuge for seamless adoption of Walter Tools Tiger·tec Gold inserts and tailored recommendations — Metav Werkzeuge can advise on optimal setup and supply genuine inserts for serial production. Technical Data SKU: TS16-IL20UN-WMP32G-WALTER Article name: Indexable turning insert TS16-IL20UN WMP32G, Walter Tools Manufacturer: Walter Tools Facts Grade: WMP32G Material group: M ISO designation: TS16-IL20UN WMP32G Special features Series: Tiger·tec Gold Chipbreaker: IL20UN Coating: coated carbide Application: stainless steel Product type: indexable turning insert FAQ What materials is this insert intended for? The TS16-IL20UN WMP32G is intended primarily for stainless steel (material group M) and is optimised for the typical challenges of stainless machining. How does the IL20UN chipbreaker affect machining? The IL20UN chipbreaker promotes controlled chip formation and easier evacuation, which improves surface finish and reduces the likelihood of built-up edge when using the WMP32G grade. Is this insert suitable for heavy interrupted cuts? The coated carbide and the toughness of the WMP32G grade provide resilience for moderate interrupted cuts, while maintaining a stable cutting edge for repeatable performance. Can the insert be used in standard toolholders? Yes; the indexable geometry is compatible with conventional turning toolholders designed for inserts with the TS16 ISO designation. What benefit does the Tiger·tec Gold series provide? Tiger·tec Gold offers a high-performance coating technology that balances wear resistance and thermal stability, extending edge life during continuous production on rostfreie Stähle. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-IL24UN WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a dedicated IL24UN chipbreaker and a grade tuned for stainless steels to secure consistent chip control and extended cutting edge life. Order the TS16-IL24UN WMP32G directly via Metav Werkzeuge or consult the team for application-specific recommendations. TS16-IL24UN WMP32G — indexable turning insert for stainless steels, Tiger·tec Gold (Walter Tools) The TS16-IL24UN WMP32G is an indexable turning insert engineered for reliable machining of stainless steels (ISO M) in medium to robust operating conditions, combining a coated carbide grade with a dedicated chipbreaker for secure chip formation. Tiger·tec Gold coated carbide grade WMP32G Optimised for stainless steels (ISO M) IL24UN chipbreaker for secure chip control Walter Tools quality and stable cutting edge Consistent cutting performance for stainless steels The insert is built on coated carbide technology from the Tiger·tec Gold series, which provides a balanced mix of wear resistance and toughness for machining austenitic and martensitic stainless steels. The WMP32G grade is described by the manufacturer as a coated cemented carbide developed specifically for this material group; it helps to reduce the tendency for built-up edge and to maintain a stable cutting edge under elevated temperatures. The integrated IL24UN chipbreaker supports predictable chip formation, reducing interruptions and the need for secondary handling. For production contexts where repeatability and process reliability matter, this combination yields measurable improvements in tool life and surface consistency without complex parameter changes. Productivity and process security in turning operations Designed for medium to robust cutting conditions, the insert offers a pragmatic balance between productivity and security. The coating reduces flank wear and improves resistance to thermal softening at the cutting zone, which in turn extends effective tool life and lowers tooling-related downtime. The modestly aggressive chip control of the IL24UN geometry prevents long, stringy chips that can foul fixtures and tools; this yields smoother cycles and fewer machine stops. Walter Tools’ engineering focus on a stable cutting edge supports consistent results batch after batch, making the insert suited to series production and demanding repair jobs where process stability is a priority. Application guidance and material compatibility Marked for application group M, the insert is intended for a broad spectrum of stainless steels that characteristically require secure chip control and thermal stability at the cutting edge. The WMP32G grade, as a coated carbide, addresses the common machining challenges of M-group alloys — high ductility, work hardening and edge adhesion. While specific cutting parameters depend on machine rigidity, workpiece condition and coolant strategy, the qualitative advantage is clear: better chip control and a reduced risk of built-up edge. The component is an indexable turning insert, so toolholders compatible with TS16-format inserts should be used to exploit the full potential of the grade and geometry. For tailored application advice or to arrange supply of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the TS16-IL24UN WMP32G and its suitability for specific turning tasks Technical data Article number: TS16-IL24UN-WMP32G-WALTER Product type: Indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Series: Tiger·tec Gold Facts ISO designation: TS16-IL24UN WMP32G Grade: WMP32G Application code: M (stainless steels) Chipbreaker: IL24UN Special features Coated carbide (Tiger·tec Gold) Suitable for stainless steels Designed for medium to robust conditions Stable chip formation and secure cutting edge FAQ What materials is this insert best suited for? The TS16-IL24UN WMP32G indexable turning insert by Walter Tools is optimised for the ISO M group, i.e. stainless steels that require secure chip control and thermal stability. Does the insert have a specialised chipbreaker? Yes, the IL24UN chipbreaker is integrated to promote predictable chip formation and to reduce the risk of long, stringy chips during turning operations. Is the grade suitable for continuous production runs? The WMP32G grade with Tiger·tec Gold coating provides an appropriate balance of wear resistance and toughness for continuous series production when machining stainless steels. Can the insert be used for light finishing as well as roughing? The coated carbide grade and chip control geometry allow use across a range of cutting conditions; selection of cutting data and holder rigidity will determine the balance between roughing and finishing performance. How does the Tiger·tec Gold coating affect tool life? Tiger·tec Gold coating improves thermal resistance and reduces flank wear, which typically extends useful tool life and supports consistent surface quality when turning stainless steels. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only and do not indicate any affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, factory-new product of the manufacturer.
TS16-IL28UN WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for long tool life and reliable machining of stainless steel; the IL28UN chipbreaker supports stable chip formation and consistent edge performance. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. TS16-IL28UN WMP32G indexable turning insert — Walter Tools (Tiger·tec Gold, IL28UN chipbreaker) The TS16-IL28UN WMP32G is an indexable turning insert designed for productive machining of stainless steel under medium to robust cutting conditions, combining a coated carbide grade with a specialised chipbreaker for secure material removal. Tiger·tec Gold coating for extended tool life WMP32G coated carbide for stainless steel machining IL28UN chipbreaker for stable chip formation Walter Tools quality and consistent edge stability Enhanced reliability for stainless steel machining The insert delivers reliable performance when tackling stainless steel, a material group known for toughness and heat sensitivity. The combination of the WMP32G grade and Tiger·tec Gold coating is engineered to support stable cutting under elevated temperatures and to reduce the tendency for built-up edge. The result is consistent edge stability and fewer unplanned tool changes, which translates into a measurable improvement in process uptime and shop-floor predictability. Stable chip control that reduces interruption Equipped with the IL28UN chipbreaker, the insert promotes controlled chip formation even in challenging turning operations. Clear chip control reduces the risk of snarled or long chips that can harm surface finish or interrupt production, offering a tangible benefit in cycle reliability. For production-focused environments, this means fewer stoppages and improved net machining time without compromising component quality. Coating and grade engineered for longer service life The coated carbide construction of the grade provides wear resistance and edge protection in demanding turning tasks. The Tiger·tec Gold technology combines coating architecture and substrate selection to improve resistance to flank and crater wear. This delivers prolonged tool life and keeps insert performance more constant over multiple indexings, lowering unit cost per part and supporting higher productivity in repetitive turning operations. Practical gains for workshop productivity By pairing a robust chipbreaker with a coated carbide grade, the insert supports higher process security and repeatability. Shops machining stainless steel will benefit from reduced rework and steadier surface quality, while maintenance intervals are extended thanks to the coating’s protective properties. The design suits both single-shift production and more intensive duty cycles, helping to streamline tooling logistics and simplify insert selection across a range of stainless steel components. Contact Metav Werkzeuge for tailored recommendations on the TS16-IL28UN WMP32G insert and specify application conditions; Metav Werkzeuge’s team can advise on the best holder and cutting parameters and supply the required inserts quickly — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TS16-IL28UN-WMP32G-WALTER Article designation: TS16-IL28UN WMP32G Product type: indexable turning insert Brand: Walter Tools Grade / coating: WMP32G (coated carbide, Tiger·tec Gold) Chipbreaker: IL28UN Series: Tiger·tec Gold Core technical data No numerical geometry data provided in source Special features and applications Suitable material group: M (stainless steel) Intended conditions: medium to robust cutting applications Coating technology: Tiger·tec Gold Material of insert: coated carbide Application focus: secure chip formation and stable edge performance FAQ Which materials is this insert designed for? The TS16-IL28UN WMP32G insert is specified for stainless steel; the WMP32G grade and Tiger·tec Gold coating are chosen to manage the toughness and heat characteristics of these materials. What benefit does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WMP32G grade enhances wear resistance and protects the cutting edge, which extends the insert’s service life and supports consistent performance over multiple indexings. How does the IL28UN chipbreaker affect machining? The IL28UN chipbreaker is engineered to promote controlled chip formation, reducing the risk of long or tangled chips and helping to maintain surface finish and process continuity during turning operations. Is this insert suitable for heavy-duty turning operations? The combination of a coated carbide grade and the IL28UN chipbreaker makes the insert suitable for medium to robust applications; for extremely heavy-duty or specialised tasks, consult Metav Werkzeuge for confirmation and setup advice. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
TS16-IL28W WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of a coated‑carbide grade engineered for stainless steels, combining stable chip formation and reliable edge life for consistent turning performance; order or consult via Metav Werkzeuge for application support. TS16-IL28W WMP32G – Indexable turning insert for stainless steels (Tiger‑tec Gold) by Walter Tools TS16-IL28W WMP32G is an indexable turning insert tailored for machining stainless steels under medium to robust conditions, offering a coated‑carbide grade and chipbreaker optimised for secure cutting. Tiger‑tec Gold coating for extended tool life Optimised for machining stainless steels (M) Coated carbide grade WMP32G for stable cutting Reliable chip control in medium to heavy cuts Proven coated grade for demanding stainless steel work The insert is supplied in the Tiger‑tec Gold family and uses the WMP32G coated‑carbide grade, purpose-developed for the challenges of machining stainless steels. This combination promotes stable chip formation and reduces the risk of built‑up edge, which translates into fewer interruptions on the shop floor and more consistent part quality. The coating supports thermal resistance and wear behaviour, so the tool maintains its cutting geometry longer under elevated temperatures typical for these alloys. Chipbreaker and geometry for consistent machining performance Equipped with the IL28W chipbreaker, the component ensures predictable chip control when taking medium to robust cuts. This controlled fragmentation reduces the likelihood of entanglement and improves surface finish consistency, making the insert suitable for repeatable production runs. The design focuses on reliable cutting action and repeatable results, improving throughput while lowering the frequency of tool changes. Production benefits: tool life, process stability and efficiency By combining a robust grade and an optimised chipbreaker, the insert contributes to longer tool life and enhanced process reliability, which supports leaner operations and better cost control over time. The efficient wear behaviour of the coated carbide reduces scrap risk and repeat machining, thereby improving overall productivity. For operations seeking to balance performance with predictable maintenance intervals, this turning solution offers measurable operational benefits. Contact Metav Werkzeuge for tailored technical advice on Walter Tools Tiger‑tec Gold inserts and application recommendations – eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data SKU: TS16-IL28W-WMP32G-WALTER Designation: TS16-IL28W WMP32G Product type: Drehwendeschneidplatte Brand: Walter Tools Core data Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: IL28W Material group: M (stainless steels) Special features Coating technology: Tiger·tec Gold (coated carbide) Intended application: medium to robust conditions on stainless steels Chip control: IL28W chipbreaker FAQ Which materials is this insert suitable for? The TS16-IL28W WMP32G insert by Walter Tools is intended primarily for stainless steels (material group M) and is designed to manage the toughness and heat generation typical of these alloys. What does the WMP32G grade offer? WMP32G is a coated‑carbide grade within the Tiger‑tec Gold family that provides improved wear resistance and thermal stability for turning operations on stainless steels, supporting longer tool life and consistent cutting performance. How does the IL28W chipbreaker affect machining? The IL28W chipbreaker delivers controlled fragmentation for medium to heavy cuts, enhancing chip evacuation and surface quality while reducing the risk of built‑up edge with stainless steel machining. Which production benefits can be expected from this insert? Using the TS16-IL28W WMP32G leads to more consistent part quality, fewer interruptions for tool changes and improved process reliability, all contributing to better overall shop productivity. Is this insert part of a recognised series or technology? Yes, the insert belongs to the Tiger‑tec Gold series from Walter Tools, which combines modern coating technology and grade development to meet challenging machining demands. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Walter Tools is mentioned for product identification purposes only. There is no affiliation between our company and the trademark owners. The offered item is an original, factory‑new product of the named manufacturer.
TS16-IL3.0ISO WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and the IL3.0ISO chipbreaker for consistent stainless‑steel turning; the insert brings reliable edge stability and predictable chip formation to medium and robust machining conditions. Order supply or request application advice via Metav Werkzeuge for fast, expert support. TS16-IL3.0ISO WMP32G turning insert – Tiger·tec Gold for stainless steels | Walter Tools The TS16-IL3.0ISO WMP32G is a coated carbide turning insert from the Tiger·tec Gold series, designed for secure chip control and a stable cutting edge when machining stainless steel under medium to robust conditions. Tiger·tec Gold coating for enhanced wear resistance Optimised chip control for stainless steels Stable cutting edge for medium to heavy machining Fits ISO TS16 tool holders and pocket geometries Maximise process stability and tool life The combination of the WMP32G cutting grade and the Tiger·tec Gold coating delivers wear resistance and consistent edge behaviour during prolonged operation. Coated carbide grades such as this are formulated to resist the adhesive wear and built‑up edge formation typical of stainless steel; that means fewer unscheduled tool changes and a steadier machining process. The result is improved uptime and predictable productivity in series production or demanding batch runs. Predictable chip control and surface integrity The IL3.0ISO chipbreaker geometry is optimised for the material group M and supports controlled chip formation. Controlled chips reduce the risk of workpiece surface damage and simplify post‑cutting handling. For operations where surface finish matters, the insert’s combination of grade and chipformer helps to deliver a consistent machined surface with lower likelihood of stringy or tangled chips, which in turn eases extraction and increases process reliability. Simple integration and broad applicability Designed to fit ISO TS16 pocket geometries, this turning insert integrates easily into common toolholders, enabling quick change‑overs and consistent clamping. Its suitability for stainless steel under medium to robust cutting conditions makes it a practical choice for manufacturers seeking a single grade to cover a range of stainless‑steel components. The coated carbide composition offers a balance between toughness and hardness, supporting both repeatable performance and good tool life. For tool selection, availability and application support for Walter Tools' Tiger·tec Gold inserts, contact Metav Werkzeuge to discuss the TS16‑format options and receive tailored advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: TS16-IL3.0ISO-WMP32G-WALTER Product: TS16-IL3.0ISO WMP32G turning insert Brand: Walter Tools Core data Grade designation: WMP32G Chipbreaker: IL3.0ISO Series: Tiger·tec Gold Material group: M (stainless steel) Special features Coating: Tiger·tec Gold (coated carbide) Application: stainless steel Tool format: TS16 compatible insert Suitable conditions: medium to robust machining FAQ What materials is this insert suited for? The TS16‑format insert with the WMP32G grade is formulated for stainless steel and performs well under medium to robust cutting conditions. How does the IL3.0ISO chipbreaker affect machining? The IL3.0ISO chipbreaker helps to create short, controllable chips when turning stainless steels, improving surface quality and easing chip evacuation. Which toolholders are compatible with this insert? This insert is designed for ISO TS16 pocket geometries and will fit holders specified for TS16 inserts. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
TS16-IR-A55 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for stable chip control and consistent performance when machining stainless steel; order directly via Metav Werkzeuge or consult their specialists for application-specific advice. TS16-IR-A55 WMP32G indexable turning insert — Walter Tools, designed for machining stainless steel with IR-A55 chip control The TS16-IR-A55 WMP32G indexable turning insert offers a robust solution for medium to heavy-duty turning of stainless steel, combining a coated carbide grade with a dedicated chipbreaker for predictable chip formation and long-lasting cutting edges. Tiger·tec Gold coating technology Grade WMP32G for stainless steel IR-A55 chipbreaker for secure chip control High process stability from Walter Tools Consistent machining performance under challenging conditions The combination of Tiger·tec Gold coating and the WMP32G grade provides a heat-resistant, wear-resistant surface that helps to maintain a stable cutting edge during interrupted cuts and elevated temperatures. In practice, this means fewer edge failures and more predictable tool life when turning stainless steel, a group of materials known for toughness and a tendency to work-harden. The coated carbide composition supports secure chip formation, reducing the risk of built-up edge and improving surface quality on the finished component. Reduced cycle-time risk and predictable tool changes Thanks to the IR-A55 chipbreaker geometry, chip control becomes more reliable across a range of feeds and depths of cut. This insert promotes short, manageable chips that clear quickly, which in turn reduces machine downtime and the frequency of manual intervention. For production environments where process repeatability is essential, the insert’s behaviour under load contributes directly to higher overall equipment effectiveness and fewer unscheduled tool changes. Practical machining benefits and material guidance The WMP32G grade is optimised specifically for stainless steel and for medium to robust cutting conditions. It supports operations where moderate entry and exit forces and thermal loads are expected. When selecting cutting parameters, favour stable clamping and conservative entry angles to exploit the insert’s ability to retain a sharp edge; the result is improved surface finish and extended service intervals. For unfamiliar applications, Metav Werkzeuge’s technical documentation and specialists can advise on parameter windows that match existing machines and part geometries. Application scenarios and reliability in production This turning insert suits workshops and production lines machining components that demand consistent geometrical accuracy and surface integrity from stainless steel parts, such as shafts, fittings, and fasteners. The grade and coating combination from Walter Tools emphasises process stability and repeatable cutting performance, making it a practical choice where both output quality and uptime matter. For customised recommendations based on machine power and spindle speed, a short consultation with Metav Werkzeuge can help to align the insert choice with production goals. For tailored machining advice or to request application-specific recommendations for Walter Tools inserts, contact Metav Werkzeuge’s technical team at info@metav-werkzeuge.com or call +49 2822 7131930 — they will help assess suitability for stainless steel and optimise tool selection. Technical Data Article number / SKU: TS16-IR-A55-WMP32G-WALTER Product: Drehwendeschneidplatte (indexable turning insert) Brand: Walter Tools Facts Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IR-A55 Material group: M (stainless steels) Special features Coating: coated carbide (Tiger·tec Gold technology) Suitable for: stainless steel ISO designation: TS16-IR-A55 WMP32G FAQ What machining tasks is this insert best suited for? The TS16-IR-A55 WMP32G insert by Walter Tools is ideal for turning stainless steel in medium to robust cutting conditions where secure chip control and edge stability are required. Can the WMP32G grade handle interrupted cuts? Yes. The WMP32G coated carbide grade, combined with the IR-A55 chipbreaker, improves resistance to thermal and mechanical shock, making it suitable for interrupted turning operations in stainless steel. Which chip behaviour can be expected with the IR-A55 chipbreaker? The IR-A55 geometry encourages short, controlled chips that evacuate reliably, reducing the risk of built-up edge and improving process repeatability when machining stainless steel. Is special tooling or clamping required to use this insert? Standard rigid clamping and properly adjusted toolholders are recommended to exploit the insert’s stability; consult Metav Werkzeuge for specific holder recommendations based on the insert’s ISO designation TS16-IR-A55 WMP32G. How does the Tiger·tec Gold coating influence tool life? The Tiger·tec Gold coating on the WMP32G grade enhances heat resistance and wear protection, which contributes to longer edge life and more consistent surface finish in stainless steel applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation with our company. The offered item is original and brand-new from the manufacturer.
TS16-IR-A60 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger·tec Gold coating and an IR‑A60 chipbreaker to ensure stable chip formation and consistent performance when machining stainless steels; order the insert directly via Metav Werkzeuge or request technical advice from the consultants. TS16-IR-A60 WMP32G — Indexable turning insert, Tiger·tec Gold, Walter Tools TS16-IR-A60 WMP32G is an indexable turning insert designed for turning applications on stainless steels, delivering stable chip control and reliable cutting-edge life in medium to robust conditions Tiger·tec Gold coating for extended edge life Optimised IR‑A60 chipbreaker for ISO M steels Suited to stainless steels (ISO M) machining Stable chip formation in medium to robust conditions Reliable performance when turning stainless steels Stainless-steel turning presents specific challenges: high toughness, tendency to form built-up edge and elevated cutting temperatures. The TS16-IR-A60 WMP32G insert combines a coated carbide substrate with Tiger·tec Gold technology to address these issues. The grade WMP32G is formulated for stainless steels (ISO M), promoting controlled deformation of the chip and a safer cutting process. This results in improved tool life and reduced interruptions in production, which supports smoother cycle times and more predictable machining outcomes. Coating and chip control that reduce edge wear The Tiger·tec Gold coating enhances thermal resistance and reduces adhesion of material to the cutting edge, while the IR‑A60 chipbreaker is shaped to promote short, controllable chips when machining demanding alloys. The combination of a dedicated M-grade and the optimised chip control lowers the risk of built-up edge and sudden flank wear. For operations where consistent surface quality and repeatable tool life are priorities, this insert delivers measurable improvements in chip control and edge stability, translating into fewer tool changes and steadier part quality. Production benefits: consistent finishes and process security In production environments requiring repeatable results on stainless steels, the insert offers tangible process benefits: steadier cutting forces, predictable tool change intervals and more uniform surface finish. The mechanical design supports medium to robust cutting conditions typical of demanding turning operations. For shops seeking higher process reliability, the insert contributes to process security and consistent part quality, and Metav Werkzeuge can provide further specification matching for particular machine and holder systems. For procurement or a technical consultation on suitability for specific stainless-steel grades, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the TS16-IR-A60 WMP32G insert and application recommendations Technical data Article number: TS16-IR-A60-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-IR-A60 WMP32G Walter Tools Product type: Indexable turning insert Brand: Walter Tools Grade/series: WMP32G — Tiger·tec Gold (coated carbide) Chipbreaker: IR‑A60 Facts ISO material group: M Material application: stainless steels (ISO M) SKU: TS16-IR-A60-WMP32G-WALTER Special features Coated carbide grade WMP32G (Tiger·tec Gold) Optimised IR‑A60 chipbreaker for secure chip control Designed for medium to robust cutting conditions Promotes stable chip formation and reduced built-up edge Focused on consistent surface finish and process security FAQ Which materials is this insert designed for? The TS16-IR-A60 WMP32G insert is intended for stainless steels (ISO M), offering chip control and edge stability for tougher, heat‑generating alloys. How does the Tiger·tec Gold coating help in practice? The Tiger·tec Gold coating provides enhanced thermal resistance and reduced adhesion, which improves edge life and reduces the tendency for built‑up edge when machining stainless steels. What advantage does the IR‑A60 chipbreaker provide? The IR‑A60 chipbreaker is optimised to produce short, controlled chips in ISO M materials, supporting safer chip evacuation and steadier cutting forces. Is the insert suitable for medium to robust turning conditions? Yes; the WMP32G grade and the IR‑A60 geometry are specified for medium to robust conditions commonly encountered in stainless-steel turning. Where can one get application guidance for this insert? Metav Werkzeuge can advise on machining parameters and holder compatibility for the TS16-IR-A60 WMP32G insert to match specific machines and grades. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. There is no connection between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer. The Walter brand is used here for explanation of origin and application only.
TS16-IR-AG55 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of long edge life, stable chip control and reliable performance for continuous turning of stainless steel. Benefit from the Tiger·tec Gold coating and optimised IR‑AG55 chipbreaker to reduce tool changes and secure reproducible results. Order the TS16-IR-AG55 WMP32G directly via Metav Werkzeuge or ask our consultants for application advice. TS16-IR-AG55 WMP32G indexable turning insert — Tiger·tec Gold coating, for stainless steel — Walter Tools TS16-IR-AG55 WMP32G is an indexable turning insert designed for dependable medium to heavy turning of stainless steel, delivering consistent chip control and extended edge life under demanding conditions. Tiger·tec Gold coating for robust edge life Optimised IR‑AG55 chipbreaker for stable chips Designed for stainless steel machining Walter Tools quality and repeatability Longer tool life through advanced coating technology The Tiger·tec Gold technology and the WMP32G grade are engineered to extend service intervals on demanding turning operations. The coated carbides incorporate a wear-resistant multilayer system that reduces flank wear and maintains a stable cutting edge under enhanced thermal loads. As a result, fewer indexings are required per component batch, improving uptime and lowering indirect production costs. This advantage is particularly relevant where consistent surface finish and dimensional stability are required across serial production. Predictable chip formation for secure machining The IR‑AG55 chipbreaker in this insert is tailored to promote controlled chip formation when machining stainless steel, a material group known for toughness and heat sensitivity. The geometry supports short, segmented chips and reduces the risk of built-up edge, which otherwise leads to surface defects and tool damage. In practice, the combination of grade and chipbreaker improves process reliability and simplifies chip handling in automated setups, contributing to a steady cycle time and fewer interruptions. Application-focused design that eases tool selection This insert belongs to the Tiger·tec Gold series and is intended for operations on stainless steel (ISO group M). Its specification streamlines tool choice for turning tasks where medium to robust cutting conditions are expected. The designation TS16‑IR‑AG55 provides clear information on geometry and chip control, enabling fast substitution in existing toolholders. With repeatable edge geometry and consistent coating performance, the insert supports uniform part quality across shifts and operators. Efficiency gains and process security in production Using a grade developed for stainless applications reduces the need for frequent rework due to surface defects or dimensional drift. The WMP32G composition focuses on stable cutting behaviour and predictable wear patterns, which supports longer uninterrupted production runs. Process planners gain the benefit of simplified feeds and speeds windows and improved overall equipment effectiveness (OEE) through reduced tool change frequency. This makes the insert a suitable choice when both productivity and component integrity are priorities. Contact Metav Werkzeuge for tailored cutting data or to arrange procurement of the TS16-IR-AG55 WMP32G — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS16-IR-AG55-WMP32G-WALTER Product name: TS16-IR-AG55 WMP32G Product type: Drehwendeschneidplatte / indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR‑AG55 Facts Material group: M (stainless steels) Coating technology: Tiger·tec Gold (coated carbide) ISO designation: TS16‑IR‑AG55 WMP32G Special features Optimised geometry for stable chips Coated carbide for enhanced wear resistance Target application: stainless steel machining Repeatable edge quality for serial production FAQ What materials is this insert suitable for? This insert is designed for machining stainless steel (ISO group M); the WMP32G grade supports safe chip formation and edge stability in these materials. How does the IR‑AG55 chipbreaker benefit turning operations? The IR‑AG55 chipbreaker produces short, controlled chips that reduce built‑up edge and assist in maintaining consistent surface finish during turning of stainless steels. Is this insert compatible with standard indexable turning holders? The TS16‑IR‑AG55 WMP32G follows common insert designation standards and can be used in matching toolholders specified for the TS16 form factor and clamping system. What production benefits can be expected from using this grade? Using the WMP32G grade usually increases uninterrupted runtime and lowers the frequency of tool indexing, supporting higher productivity and greater process stability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
TS16-IR-AG55-F5 WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WMP32G grade for reliable, repeatable performance when machining rostfreier Stahl; the optimised IR-AG55-F5 chipbreaker supports stable chip formation and reduced downtime. Order directly via Metav Werkzeuge or consult our team for application-specific advice. TS16-IR-AG55-F5 WMP32G indexable turning insert — Tiger·tec Gold for rostfreier Stahl, Walter Tools TS16-IR-AG55-F5 WMP32G is an indexable turning insert engineered for medium to robust stainless steel machining, offering a balance of wear resistance and process stability Tiger·tec Gold coating for long tool life Optimised IR-AG55-F5 chipbreaker for stable chips Specifically for rostfreier Stahl machining Improved chip control for consistent productivity The combination of the IR-AG55-F5 chipbreaker geometry and the WMP32G grade delivers stable chip control during continuous and intermittent cuts. This geometry reduces the risk of built-up edge and tangled chips when working with rostfreier Stahl, a material group prone to toughness and heat generation. By promoting predictable chip shapes and evacuation, the insert helps to maintain machine uptime and reduces the need for frequent tool changes. The result is a smoother production flow and fewer quality-related interruptions. Longer tool life and predictable wear behaviour The Tiger·tec Gold technology provides a coated carbide substrate that improves thermal resilience and wear resistance under demanding conditions. The coated structure supports a stable cutting edge, which means fewer regrinds and extended intervals between index changes. For operations where consistent surface finish and dimensional repeatability are required, this insert offers measurable economic benefits through lower tooling costs per part and reduced process variability. The coating also contributes to more forgiving performance in mixed batches of stainless alloys. Practical integration and application guidance The insert’s ISO designation and compact geometry make it straightforward to integrate into existing toolholders designed for indexable turning inserts. The grade is optimised for machining rostfreier Stahl in medium to robust conditions, making it suitable for components where toughness and heat sensitivity are relevant. When selecting cutting parameters, favour conservative feeds during roughing and moderate speeds with appropriate coolant strategies to exploit the Tiger·tec Gold advantages and protect the cutting edge. For specific cutting data or variant checks, Metav Werkzeuge can provide tailored recommendations. For application-specific advice or to order Walter Tools inserts like the TS16-IR-AG55-F5 WMP32G, please contact Metav Werkzeuge — the team is available for technical consultation and quick delivery coordination Technical data Article number: TS16-IR-AG55-F5-WMP32G-WALTER Designation: TS16-IR-AG55-F5 WMP32G Product type: Indexable turning insert Manufacturer: Walter Tools Facts No numerical specifications provided Special features Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IR-AG55-F5 Substrate: coated carbide Material group: M Machinable material: rostfreier Stahl ISO designation: TS16-IR-AG55-F5 WMP32G FAQ Which materials is this insert intended for? The TS16-IR-AG55-F5 WMP32G is formulated for machining rostfreier Stahl; the grade and geometry prioritise secure chip formation when working with stainless steels. What benefits does the Tiger·tec Gold technology provide? Tiger·tec Gold offers enhanced thermal stability and wear resistance, extending the service life of the insert and improving process consistency when using Walter Tools turning grades. How does the IR-AG55-F5 chipbreaker affect machining? The IR-AG55-F5 chipbreaker is designed to produce controlled chips, reducing the likelihood of built-up edge and helping to maintain surface quality in stainless steel turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademark and product names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and indicate no affiliation. The supplied article is an original, factory-new product from the manufacturer.
TS16-IR-AG60 WMP22G WMP22G Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Gold coating and the WMP22G grade ensures longer cutting-edge life and reliable chip formation in stainless steel turning; combine these strengths with the optimised IR-AG60 chipbreaker for consistent productivity and order directly via Metav Werkzeuge or consult our specialists for application advice. TS16-IR-AG60 WMP22G – indexable turning insert by Walter Tools (Tiger·tec Gold, IR-AG60 chipbreaker) TS16-IR-AG60 WMP22G is an indexable turning insert designed for stable, productive machining of stainless steels under medium to robust cutting conditions Tiger·tec Gold coating for long tool life Optimised IR-AG60 chipbreaker Engineered for stainless steel machining Increase throughput with a coating built for endurance The combination of Tiger·tec Gold technology and the WMP22G grade delivers a coated carbide solution that focuses on sustained performance when machining stainless steel. The advanced coating system reduces flank wear and supports a stable cutting edge, which in practice leads to fewer insert changes and less downtime. For production environments where predictability matters, this turning insert provides measurable improvements in tool life and process reliability while maintaining surface quality on challenging, heat-generating alloys. Safer, cleaner turning thanks to optimised chip control The IR-AG60 chipbreaker is engineered to produce well-formed chips during turning operations, reducing the risk of entanglement and built-up edge formation. Controlled chip flow improves operator safety and lessens the burden on downstream chip handling systems. The insert geometry encourages shorter, segmenting chips in many stainless steel turning scenarios, aiding coolant access and promoting a consistent surface finish. These effects translate into fewer interruptions and a smoother overall machining cycle. Predictable performance for workshop integration and process planning As an indexable turning insert, this product integrates into standard turning toolholders and supports a repeatable set-up routine for batch production. The coated carbide grade is intended for medium to robust cutting conditions and offers a balance between edge stability and wear resistance, which helps to maintain tolerances over longer tool life. For engineering teams seeking reliable, auditable results, the insert reduces variability and supports continuous production goals while aligning with modern shop-floor process control measures. Contact Metav Werkzeuge to discuss suitability for specific stainless steel alloys and to secure the TS16-IR-AG60 WMP22G for your production needs Technical data Article number: TS16-IR-AG60-WMP22G-WALTER Designation: TS16-IR-AG60 WMP22G Product type: indexable turning insert Grade: WMP22G Facts Application group: M (stainless steels) Chipbreaker: IR-AG60 Series: Tiger·tec Gold Cutting material: coated carbide Special features Optimised for stainless steel machining Stable cutting edge and predictable chip formation Suitable for medium to robust cutting conditions Manufacturer: Walter Tools Series benefits: improved process security and surface quality FAQ What materials is this insert suitable for? The TS16-IR-AG60 WMP22G is primarily intended for stainless steel machining and is optimised for medium to robust cutting conditions on these alloys. How does the IR-AG60 chipbreaker affect chip formation? The IR-AG60 geometry promotes controlled, shorter chips that reduce entanglement and improve coolant penetration, resulting in safer turning cycles and better surface finishes. Is this insert compatible with standard turning toolholders? Yes, as an indexable turning insert the TS16-IR-AG60 WMP22G fits conventional holders designed for the respective insert form and clamping system. What benefits does the Tiger·tec Gold series provide? Tiger·tec Gold coating enhances wear resistance and cutting-edge stability, extending tool life and improving process consistency when machining demanding materials such as stainless steels. Can this insert be used for finishing and semi-finishing operations? The WMP22G grade is suitable for a range of operations; in many cases it provides a good compromise between edge robustness for semi-finishing and the ability to achieve acceptable surface quality in finishing passes. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Markennamen and protected trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original and brand new from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com