TS16-IR-AG60 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for a secure cutting edge and consistent chip control in the machining of stainless steel; this increases process stability and throughput. Order the insert through Metav Werkzeuge or contact their consultants for application-specific advice. TS16-IR-AG60 WMP32G — Turning indexable insert for stainless steel, Walter Tools TS16-IR-AG60 WMP32G is a turning indexable insert optimised for reliable machining of stainless steel under moderate to robust conditions. Tiger·tec Gold coating for edge stability WMP32G grade for stainless steel IR-AG60 chipbreaker for secure chip control TS16 form for stable cutting performance Maximise machining efficiency with a coated grade built for stainless steel The combination of Tiger·tec Gold coating and the WMP32G grade delivers improved thermal resistance and wear control in operations with stainless steel. Coating technology reduces adhesion and assists in maintaining a sharp cutting edge under elevated temperatures; as a result, cycle times can be shortened while preserving surface quality. This insert is engineered to support consistent metal removal rates and predictable tool life in medium to heavy duty cutting regimes. Controlled chips and consistent surface finish for demanding turning The IR-AG60 chipbreaker is designed to promote secure chip formation when working with tough, ductile materials. Stable chip control reduces the risk of built-up edge and interrupted cuts, which enhances operator safety and minimises secondary operations. A reliable chip-forming geometry contributes directly to a consistent surface finish and reduces the need for rework, delivering measurable productivity benefits for batch production and single-piece flow. Practical selection and process benefits for workshop integration Choosing this insert simplifies tooling decisions for stainless steel applications: the WMP32G grade is a coated carbide solution that balances edge robustness with reasonable wear resistance, suited to a wide range of process windows. Integrating this insert into existing toolholders with TS16 form gives immediate process stability and easier inventory management. For users less familiar with technical terms, coated carbide means a substrate of hard material with a protective surface layer that delays wear and improves performance in heat-prone cuts. Contact Metav Werkzeuge for availability and tailored technical guidance on integration of the TS16-IR-AG60 WMP32G; their consultants can advise on cutting data and supply options via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TS16-IR-AG60-WMP32G-WALTER Description: Drehwendeschneidplatte TS16-IR-AG60 WMP32G Walter Tools Type: Turning indexable insert Manufacturer: Walter Tools Facts Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IR-AG60 Material group: M Special features Coating: Tiger·tec Gold (coated carbide) Suitable for: stainless steel Benefits: stable chip control, secure edge life Recommended for: moderate to robust cutting conditions FAQ What materials is this insert intended for? The TS16-IR-AG60 WMP32G is specified for machining stainless steel and is formulated to manage the toughness and heat characteristics of that material group. How does the Tiger·tec Gold coating help in practice? The Tiger·tec Gold coating on the WMP32G grade improves heat resistance and reduces adhesion, which helps the insert maintain cutting performance and prolongs effective tool life. Which chipbreaker should be selected for long continuous cuts? The IR-AG60 chipbreaker is optimised for secure chip control in continuous and heavier cuts, reducing the likelihood of built-up edge during extended operation. Can this insert be used in existing TS16 toolholders? Yes, the TS16 form is compatible with standard TS16 toolholders, allowing straightforward replacement and inventory harmonisation. How does the WMP32G grade perform compared with general-purpose grades? WMP32G, as a coated carbide grade, emphasises edge stability and process reliability for stainless steel, offering a balance between wear resistance and toughness suitable for medium to robust conditions. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-IR-AG60-F5 WMP32G WMP32G Wendeplatten - Walter Tools
High-performance Tiger·tec Gold grade WMP32G provides stable chip formation and extended tool life for demanding stainless steel turning; combined with the IR-AG60-F5 chipbreaker and TS16 geometry this insert supports consistent production throughput. Order the TS16-IR-AG60-F5 WMP32G insert directly via Metav Werkzeuge or ask the consultants for application guidance. TS16-IR-AG60-F5 WMP32G — Tiger·tec Gold turning insert for stainless steels | Walter Tools A TS16-IR-AG60-F5 WMP32G indexable turning insert optimised for machining stainless steels in medium to robust cutting conditions. Tiger·tec Gold coated carbide grade WMP32G Designed for machining stainless steels M Stable chip formation for reliable turning Compatible with TS16 toolholder geometry Consistent performance where heat and adhesion are critical The coated carbide grade WMP32G from the Tiger·tec Gold family is engineered for the particular demands of stainless steels: high toughness, tendency to build up at the cutting edge and elevated temperatures. The combination of a wear-resistant coating and a robust substrate supports stable chip formation and reduces unexpected tool exchanges. This translates into steadier cycle times and fewer quality interruptions, which helps to maintain machine uptime and production predictability. Better surface quality and process security with an optimised chipbreaker The integrated IR-AG60-F5 chipbreaker is tailored to control chip flow and avoid long, stringy chips typical of austenitic stainless grades. Controlled chip formation limits built-up edge and contributes to a more uniform surface finish, lowering the need for rework. Where reproducible component quality matters, the insert’s geometry and edge preparation enable predictable cutting forces and improved machining stability under medium to robust conditions. Simple integration and predictable tool management for workshops The insert’s TS16 geometry fits common turning toolholders and is straightforward to stock and replace, aiding inventory control and tool-change efficiency. The grade’s focus on stability and extended edge life supports longer tool programmes and reduces the frequency of cutting parameter adjustments. If clarification on suitability for a particular stainless alloy or machining strategy is required, technical advice is available to align the insert selection with specific process targets. Contact Metav Werkzeuge for tailored application advice or to secure TS16-IR-AG60-F5 WMP32G inserts from Walter Tools via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: TS16-IR-AG60-F5-WMP32G-WALTER ISO designation: TS16-IR-AG60-F5 WMP32G Product type: Turning insert Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IR-AG60-F5 Material group: M (stainless steels) Brand: Walter Tools Facts No dimensional data provided Special features Coating technology: Tiger·tec Gold Substrate: coated carbide Application: stainless steels (M) Chip control: IR-AG60-F5 chipbreaker Cutting conditions: medium to robust Compatibility: TS16 toolholder geometry Original Walter Tools grade FAQ What steels is this insert intended for? The TS16-IR-AG60-F5 WMP32G insert is specified for stainless steels (material group M) and is suited to grades that require secure chip control and resistance to built-up edge. How does the Tiger·tec Gold coating help in turning stainless steel? The Tiger·tec Gold coating on the WMP32G grade improves wear resistance and reduces friction, which supports stable cutting and extended edge life when machining stainless materials. What is the function of the IR-AG60-F5 chipbreaker? The IR-AG60-F5 chipbreaker controls chip form and evacuation, preventing long ribbons and improving machining consistency and surface quality in challenging stainless-steel operations. Can the insert be used in standard TS16 holders? Yes, the insert follows the TS16 geometry and is compatible with standard toolholders designed for that insert form, simplifying tool changes and inventory management. Is this an original Walter Tools product and how does the brand affect performance expectations? The insert is an original Walter Tools grade (WMP32G) from the Tiger·tec Gold series; Walter Tools products are known for stable cutting edges and consistent performance in production environments. Manufacturer: Walter Tools; Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
TS16-IR-G55 WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WMP32G grade for reliable chip formation and extended tool life; the IR‑G55 chipbreaker delivers stable performance when machining rostfreier Stahl. Order the TS16‑IR‑G55 WMP32G indexable turning insert directly via Metav Werkzeuge or ask our consultants if needed. TS16-IR-G55 WMP32G indexable turning insert — Tiger‑tec Gold, for rostfreier Stahl (Walter Tools) TS16-IR-G55 WMP32G is an indexable turning insert engineered for reliable turning of stainless grades under medium to robust cutting conditions Tiger‑tec Gold coating for long tool life WMP32G: coated carbide grade for rostfreier Stahl IR‑G55 chipbreaker for stable chip control Indexable geometry for fast edge changes Greater process reliability through optimised coating and grade The combination of the Tiger‑tec Gold coating and the WMP32G grade focuses on process reliability and consistent performance when machining rostfreier Stahl. The coating technology reduces friction at the cutting edge, which in turn lowers heat generation and helps to avoid built‑up edge during interrupted or tough cuts. The insert’s coated carbide substrate supports a secure cutting edge and contributes to improved tool life, making the component a cost‑effective choice for production runs where stability and repeatability are essential. Predictable chip formation and effective machining performance The IR‑G55 chipbreaker is designed to shape chips reliably in the conditions typical for stainless steels, improving evacuation and reducing the risk of entanglement. Stable chip control minimises surface defects and protects the tool edge, which leads to fewer indexings and reduced downtime. In practice, this means more consistent cycle times and improved component quality — a tangible operational benefit for job shops and production lines working with demanding materials. Practical guidance for selection and application The insert is classified for machining the ISO group M and is therefore particularly suited to rostfreier Stahl, which tends to be tough and thermally challenging. For users less familiar with cutting geometry, the design of this insert supports straightforward application: the indexable format allows quick edge rotation, and the combination of grade and chipbreaker reduces the likelihood of unexpected tool failures. Selection should consider the workpiece alloy and cutting conditions; consult technical data to match feed and speed for optimal performance. Consult Metav Werkzeuge for application‑specific advice on the Walter Tools TS16-IR-G55 WMP32G insert or arrange supply via Metav Werkzeuge: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: TS16-IR-G55-WMP32G-WALTER SKU: TS16-IR-G55-WMP32G-WALTER Designation: TS16-IR-G55 WMP32G Facts Material group: M Application: rostfreier Stahl Series: Tiger‑tec Gold Special features Grade: WMP32G (coated carbide) Chipbreaker: IR‑G55 Type: Indexable turning insert Product family: Tiger‑tec Gold FAQ What materials is this insert suitable for? The TS16‑IR‑G55 WMP32G insert is intended for machining rostfreier Stahl (ISO group M); the combination of the WMP32G grade and Tiger‑tec Gold coating supports secure chip formation in these materials. How does the IR‑G55 chipbreaker help in production? The IR‑G55 chipbreaker controls chip shape and evacuation to reduce entanglement and protect the cutting edge, improving process stability for turning operations with stainless grades. What does the Tiger‑tec Gold series contribute to performance? The Tiger‑tec Gold series provides a wear‑resistant coating system that lowers friction and heat at the cutting zone, which extends edge life and supports repeatable machining results with Walter Tools inserts. Is this insert suitable for interrupted cuts or heavier machining? The WMP32G grade and IR‑G55 geometry are designed to cope with medium to robust operating conditions typical for rostfreier Stahl, offering improved resistance to edge damage in many interrupted or higher‑load scenarios. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names and protected product designations are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
TS16-IR-G55-F5 WMP32G Wendeplatten - Walter Tools
Take advantage of a premium Tiger·tec Gold grade and a dedicated IR‑G55‑F5 chipbreaker to secure consistent productivity and controlled chip formation when machining stainless steel; order the TS16‑IR‑G55‑F5 WMP32G directly via Metav Werkzeuge or request application advice from the consultants. TS16-IR-G55-F5 WMP32G turning insert (Tiger·tec Gold) – Walter Tools The TS16-IR-G55-F5 WMP32G is an indexable turning insert developed for machining stainless steel under medium to robust cutting conditions, combining a coated carbide grade with a chipbreaker tailored for safe chip control Tiger·tec Gold coating for consistent edge life WMP32G grade optimised for stainless steel IR-G55-F5 chipbreaker for secure chip control Suitable for medium to heavy cutting conditions Higher process stability through coating technology The combination of Tiger·tec Gold coating and a coated carbide substrate provides improved resistance to thermal and mechanical wear, which translates into a more predictable tool life when working with stainless materials. The WMP32G grade is formulated for the challenges posed by stainless steel — material groups with high toughness and tendency to produce built‑up edge and heavy, stringy chips. By stabilising the cutting edge and delaying flank wear, the insert reduces unplanned tool changes and contributes to steadier machining cycles and fewer interruptions on the production floor. Reliable chip control and better surface results The integrated IR‑G55‑F5 chipbreaker is designed to promote consistent chip formation and evacuation in demanding turning operations. Controlled chips lower the risk of re-cutting or part damage and help maintain tool life by avoiding sudden load peaks. In practical terms, the geometry assists in producing a cleaner surface finish and reduces secondary operations for chip management, which supports both efficiency gains and improved output quality during sequential batch production. Application focus and operational benefits As part of the Tiger·tec Gold series, this insert supports medium to heavy applications on stainless steel, offering a balance between toughness and wear resistance for longer continuous cuts. The format TS16‑IR‑G55‑F5 suits standard indexable turning toolholders and delivers repeatable performance in serial machining environments. The grade and chipbreaker orientation together promote stable cutting forces and reduced cycle variability, which is especially valuable for shops prioritising throughput and process predictability over frequent tool interventions. For tailored application advice or to request a quotation for the Walter Tools TS16-IR-G55-F5 WMP32G turning insert, contact Metav Werkzeuge via eMail info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical support Technical Data Article number: TS16-IR-G55-F5-WMP32G-WALTER Name: TS16-IR-G55-F5 WMP32G turning insert Series: Tiger·tec Gold Chipbreaker: IR-G55-F5 Manufacturer: Walter Tools Facts Material group: M (stainless steel) Special features Grade: WMP32G (coated carbide) Coating technology: Tiger·tec Gold Application: machining of stainless steel Insert designation: TS16‑IR‑G55‑F5 WMP32G FAQ What workpieces is this insert intended for? The TS16‑IR‑G55‑F5 WMP32G insert is intended primarily for stainless steel components and performs reliably under medium to heavy cutting conditions. How does the Tiger·tec Gold coating help in practice? The Tiger·tec Gold coating on the WMP32G grade improves thermal resistance and wear behaviour, which extends tool life and stabilises cutting performance on stainless steels. Does the IR‑G55‑F5 chipbreaker reduce built‑up edge? Yes, the IR‑G55‑F5 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of built‑up edge and improving surface quality during turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-IR-G60 WMP22G WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, the WMP22G grade optimised for rostfreier Stahl machining, and the IR-G60 chipbreaker for stable chip formation to keep turning operations productive and consistent; order directly via Metav Werkzeuge or consult the technical team for application guidance. TS16-IR-G60 WMP22G Drehwendeschneidplatte — turning insert for rostfreier Stahl by Walter Tools TS16-IR-G60 WMP22G is an indexable turning insert designed for demanding rostfreier Stahl applications, providing reliable chip control and long tool life in medium to robust cutting conditions. Tiger·tec Gold coating for high process security WMP22G grade for rostfreier Stahl machining IR-G60 chipbreaker for reliable chip control Stable cutting edge and long tool life Boosted cutting stability for rostfreier Stahl The combination of the Tiger·tec Gold coating and the WMP22G coated-carbide grade delivers increased wear resistance and thermal stability when machining rostfreier Stahl. Materials in the M group tend to work-harden and generate heat; the chosen carbide grade and coating reduce friction and support a controlled cutting edge life. This means fewer unscheduled tool changes and more predictable component quality in serial production. Technical users will value the improved edge retention under intermittent and continuous cuts, reducing downtime and improving overall process reliability. Predictable chip control that minimises interruptions Equipped with the IR-G60 chipbreaker, the insert promotes stable chip formation even under the challenging conditions of rostfreier Stahl turning. The chipbreaker geometry helps break and guide chips away from the cut, lowering the risk of built-up edge and process interruptions. In practice this translates to safer operation, reduced rework and consistent surface finish. The chip control is particularly beneficial in automated or unattended shifts where dependable behaviour of each cutting edge is essential to maintain cycle time and component tolerances. Consistent productivity and integration into workshop tooling As a member of the Tiger·tec Gold series from Walter Tools, this insert supports high process security and reproducible results across batches. The grade and chipbreaker are selected to complement standard turning toolholders that accept this insert form, enabling straightforward integration into existing tooling systems. Operators gain improved productivity through longer tool life and reduced set-up frequency, while engineers benefit from easier process parameter transfer between machines. The part is suitable for shops seeking a balance of robustness and precision in rostfreier Stahl turning. For application advice or to source Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 for prompt technical support and ordering. Technical data Article number: TS16-IR-G60-WMP22G-WALTER Label: Drehwendeschneidplatte TS16-IR-G60 WMP22G Walter Tools Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts ISO designation: TS16-IR-G60 WMP22G Grade/series: WMP22G, Tiger·tec Gold Chipbreaker: IR-G60 Material group: M Special features Coated carbide grade optimised for rostfreier Stahl Designed for secure chip formation and edge stability Suitable for medium to robust cutting conditions Belongs to the Tiger·tec Gold product family FAQ Which materials can be machined with this insert? The TS16-IR-G60 WMP22G insert is designed for rostfreier Stahl (ISO group M) and provides reliable performance in medium to robust turning applications. What does the Tiger·tec Gold designation mean? Tiger·tec Gold is a coating and grade technology from Walter Tools that enhances wear resistance and thermal stability for better process security when machining demanding materials. How does the IR-G60 chipbreaker affect machining? The IR-G60 chipbreaker promotes controlled chip flow and stable chip formation, reducing built-up edge and interruptions during rostfreier Stahl turning. Is this insert compatible with standard toolholders? The TS16-IR-G60 WMP22G follows established insert form and ISO designation conventions and is compatible with toolholders designed for this insert geometry. Where can further technical parameters be obtained? Detailed recommendations for cutting data and holder compatibility are available from Metav Werkzeuge; the insert designation TS16-IR-G60 WMP22G should be quoted for precise guidance. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation or endorsement implied between our company and the named brands. The offered item is an original, factory-new product of the stated manufacturer (Walter Tools).
TS16-IR-G60 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for reliable machining of stainless steel, ensuring stable chip formation and consistent edge life; request expert advice or place an order via Metav Werkzeuge for seamless integration into production. TS16-IR-G60 WMP32G – Indexable turning insert with IR‑G60 chipbreaker by Walter Tools The TS16-IR-G60 WMP32G is an indexable turning insert designed for demanding turning operations in stainless steel, combining a coated carbide substrate with a dedicated chipbreaker for secure chip control. Tiger·tec Gold coating technology WMP32G grade for stainless steel IR‑G60 chipbreaker for stable chips High edge stability under robust conditions Consistent performance for machining stainless steel The Tiger·tec Gold series delivers a coated carbide solution engineered for behaviour when cutting stainless steel. The WMP32G grade provides a balance between toughness and wear resistance that supports stable chip formation under elevated temperatures and adhesion-prone conditions. This stability reduces the risk of built-up edge and contributes to repeatable surface quality in serial production, which helps maintain production rhythm and reduces scrap rates. Optimised chip control and process reliability The integrated IR‑G60 chipbreaker is shaped to break and evacuate chips effectively during turning operations, lowering the chance of entanglement and tool damage. Combined with the coating’s thermal and tribological properties, the geometry promotes predictable chip flow and less frequent interruptions. As a result, machining cycles run more smoothly and cycle-time variance is minimised, making the insert suitable for both medium and robust cutting scenarios in stainless steel. Edge life and economic productivity The coated carbide construction and the Tiger·tec Gold technology deliver improved edge integrity under demanding cutting loads. This translates into longer intervals between indexing or tool changes and a more consistent tool life profile across batches. The economic effect is twofold: fewer tool changes reduce downtime, and more predictable wear behaviour simplifies tool management and inventory planning in the workshop. Integration into standard turning toolholders Designated as TS16 in its ISO-style designation, the insert fits toolholders and systems that accept this geometry and grading. The combination of a proven grade and a dedicated chipbreaker makes it straightforward to specify for stainless steel turning tasks where secure chip control and dependable edge behaviour are required. For applications that demand stable process performance and uniform results, this insert is a practical choice. For tailored advice on selecting the right Walter Tools insert for specific stainless steel applications and to arrange supply through Metav Werkzeuge, please contact our consultants at Metav Werkzeuge for precise technical guidance and delivery options Technical Data SKU: TS16-IR-G60-WMP32G-WALTER Article label: Drehwendeschneidplatte TS16-IR-G60 WMP32G Walter Tools Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR‑G60 Manufacturer: Walter Tools Material group designation: M Facts Designation: TS16-IR-G60 WMP32G Applicable material group: M (stainless steel) Coating class: coated carbide Special features Coating technology: Tiger·tec Gold Substrate: coated carbide Primary application: turning in stainless steel Geometry: TS16 insert designation Process benefits: stable chip formation, improved edge life FAQ What materials is this insert best suited for? The TS16-IR-G60 WMP32G is optimised for machining stainless steel (material group M) and delivers controlled chip formation and reliable edge performance in such applications. How does the IR‑G60 chipbreaker affect machining? The IR‑G60 chipbreaker promotes predictable chip breaking and evacuation, reducing interruptions and supporting continuous turning operations with the TS16‑design insert. What does the Tiger·tec Gold designation mean for tool life? Tiger·tec Gold indicates a coated carbide technology that enhances thermal and tribological resistance, contributing to improved edge stability and prolonged performance under robust cutting conditions. Can this insert be used for high-temperature cutting of stainless steel? Yes, the WMP32G grade within the Tiger·tec Gold series is formulated to cope with the heat generation and adhesion tendency typical of stainless steel, supporting stable machining under elevated temperatures. Is the TS16-IR-G60 WMP32G compatible with standard TS16 toolholders? The ISO-style designation TS16 indicates compatibility with holders and systems designed for TS16 inserts; however, toolholder verification is recommended before use. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-IR-G60-F5 WMP32G Wendeplatten - Walter Tools
Take advantage of robust chip control, a Tiger·tec Gold coated grade and a reliable cutting edge for consistent stainless steel turning. The combination of WMP32G performance and the IR-G60-F5 chipbreaker supports secure chips and extended tool life. Order the TS16-IR-G60-F5 WMP32G insert directly via Metav Werkzeuge or ask the consultants for application advice. TS16-IR-G60-F5 WMP32G – turning indexable insert, optimised for stainless steel (Walter Tools) TS16-IR-G60-F5 WMP32G is a coated indexable insert engineered for turning operations in stainless steel, combining Tiger·tec Gold technology with a dedicated chipbreaker for stable metal removal Coated carbide grade Tiger·tec Gold WMP32G Optimised for stainless steel machining IR-G60-F5 chipbreaker for secure chips Stable cutting edge and long tool life Delivering consistent machining of stainless steels The insert is built on a coated carbide substrate from the Tiger·tec Gold family, which increases resistance to abrasive wear and reduces the tendency for built-up edge when machining tough alloys. This results in a reliable cutting edge that maintains geometry over multiple passes, which in turn supports predictable component quality and fewer unscheduled tool changes. For shops working with a range of corrosion-resistant alloys, the grade’s formulation promotes consistent surface finish and process repeatability without sacrificing productivity. Predictable chip control to reduce stoppages The integrated IR-G60-F5 chipbreaker is designed to break and evacuate chips effectively during turning of materials in the ISO M group. By promoting stable chip formation, the insert reduces the risk of entanglement and machine downtime and improves operator safety. Chipbreakers tailor chip form to the cutting conditions; the IR-G60-F5 geometry is particularly suited to medium to robust cutting parameters where reliable chip flow enables longer uninterrupted cycles and easier post-process handling. High process security and extended tool life Thanks to its coating and substrate combination, the grade offers improved tool life under demanding cutting conditions. The insert supports medium to robust operations in stainless steel where heat generation and material toughness can otherwise shorten edge life. As an indexable insert, it provides economical reindexing and predictable replacement intervals, which simplifies inventory management and reduces per-part tooling costs. The result is a balance between throughput and component integrity, especially where repeatable results are essential for batch production. Contact Metav Werkzeuge for tailored cutting data and to discuss Walter Tools Tiger·tec Gold inserts for specific stainless steel applications Technical data Article number: TS16-IR-G60-F5-WMP32G-WALTER Product: Turning indexable insert ISO designation: TS16-IR-G60-F5 WMP32G Grade: WMP32G Manufacturer: Walter Tools Core data Material group: M Suitable for: stainless steel (ISO M) Chipbreaker: IR-G60-F5 Series: Tiger·tec Gold Features Coated cemented carbide Stable chip control geometry Designed for medium to robust cutting conditions Reliable cutting edge and extended life Intended application: turning of stainless steel FAQ Which materials is this insert suitable for? The TS16-IR-G60-F5 WMP32G insert is formulated specifically for ISO M materials and is suitable for a range of stainless steel alloys, providing stable chip control under medium to robust conditions. What advantages does Tiger·tec Gold bring? Tiger·tec Gold coating on the WMP32G grade enhances wear resistance and reduces built-up edge, helping the insert maintain a reliable cutting edge and longer service life during stainless steel machining. How does the IR-G60-F5 chipbreaker affect performance? The IR-G60-F5 chipbreaker produces predictable chip forms and efficient evacuation, improving machining continuity and reducing the likelihood of stoppages caused by chip entanglement. Is this insert suitable for finishing operations? The insert is optimised for medium to robust applications; finishing is possible if cutting parameters are adjusted to lower feeds and speeds, taking advantage of the grade’s stable edge condition. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
TS16-IR0.5ISO WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WMP32G grade and the optimised IR0.5ISO chipbreaker for reliable turning of stainless steel; order the insert directly via Metav Werkzeuge or consult our application specialists for cutting data and process recommendations. TS16-IR0.5ISO WMP32G – Turning insert by Walter Tools for stainless steel, Tiger·tec Gold coating A TS16-IR0.5ISO WMP32G indexable turning insert designed for reliable machining of stainless steels under medium to robust cutting conditions, combining a coated carbide grade and a dedicated chipbreaker for improved process security Tiger·tec Gold coating for extended tool life IR0.5ISO chipbreaker for controlled chip formation Optimised for stainless steel (ISO group M) Durable coating and grade for extended tool life The insert uses the Tiger·tec Gold family and the WMP32G grade, a coated carbide formulation engineered for the particular challenges of stainless steel machining. Coated grades in this series enhance wear resistance and help maintain a stable cutting edge under elevated temperatures and adhesive tendencies typical of austenitic and duplex alloys. The coating reduces flank wear and supports predictable tool life, which contributes directly to lower tooling costs per component and fewer unscheduled tool changes on the production floor. Predictable chip control that protects the workpiece Equipped with the IR0.5ISO chipbreaker, the insert promotes consistent chip control when machining materials from ISO group M. The chip geometry is tailored to interrupt and curl chips reliably, reducing the risk of built-up edge and long stringing chips that can harm surface finish or process safety. Improved chip evacuation also supports steady cutting forces and helps achieve reproducible part quality, which is particularly valuable for serial production where surface integrity and dimensional stability are critical. Process security and application scope for everyday workshop use As part of the Tiger·tec Gold range, this indexable insert is intended for medium to robust applications in stainless steel. The grade and chipbreaker combination aims to balance productivity and wear resistance: users can expect a stable machining behaviour in challenging conditions while maintaining acceptable surface quality. The design supports straightforward integration into standard turning toolholders and is suitable for shops prioritising repeatable performance and efficient tool consumption. Contact Metav Werkzeuge for tailored cutting data, application advice and sample evaluation of Walter Tools Tiger·tec Gold turning inserts; Metav Werkzeuge’s consultants will recommend the best configuration for the machining task at hand Technical data Article number: TS16-IR0.5ISO-WMP32G-WALTER Product: Drehwendeschneidplatte Brand: Walter Tools Grade: WMP32G Core specifications Series: Tiger·tec Gold Chipbreaker: IR0.5ISO Material group: M (rostfreie Stähle) SKU: TS16-IR0.5ISO-WMP32G-WALTER Special features Coated carbide grade WMP32G Optimised for stainless steel applications (ISO M) Designed for stable chip formation and improved edge life FAQ Which materials is this insert suitable for? The TS16-IR0.5ISO WMP32G insert is specified for stainless steel machining and is aligned with ISO material group M; the WMP32G grade supports medium to robust cutting conditions in these alloys. What advantage does the Tiger·tec Gold technology provide? Tiger·tec Gold technology in the WMP32G grade offers enhanced wear resistance and thermal stability, which helps the insert retain a stable cutting edge and achieve predictable tool life in demanding stainless steel tasks. How does the IR0.5ISO chipbreaker affect machining? The IR0.5ISO chipbreaker is engineered to promote reliable chip control when machining group M materials, reducing built-up edge and improving surface consistency while aiding chip evacuation. Is this insert suitable for serial production? Yes; the combination of the WMP32G grade and the Tiger·tec Gold coating is intended to deliver repeatable performance and process security suitable for serial and batch production where consistent part quality is required. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are cited solely for explanation. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the respective manufacturer.
TS16-IR0.75ISO WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating, the WMP32G grade and the IR0.75ISO chipbreaker to secure long tool life and consistent chip formation when machining rostfreier Stahl; order directly via Metav Werkzeuge or ask our consultants for application advice. TS16-IR0.75ISO WMP32G — indexable turning insert for rostfreier Stahl | Walter Tools A TS16-IR0.75ISO WMP32G indexable turning insert engineered for dependable performance when machining rostfreier Stahl under medium to robust cutting conditions Tiger·tec Gold coating for improved wear resistance WMP32G grade for reliable rostfreier Stahl cutting IR0.75ISO chipbreaker for controlled chip formation Suitable for medium to robust cutting conditions Higher uptime through advanced coating technology The combination of the Tiger·tec Gold coating and the WMP32G grade provides measurable improvements in wear resistance and sustained cutting performance. Coating technology reduces flank wear and thermal degradation during prolonged cycles, which results in fewer insert changes and longer intervals between regrinds. In practice, this means a reduction in machine downtime and improved process repeatability—advantages that directly contribute to a more economical production flow. Predictable chips and safer machining The IR0.75ISO chipbreaker is designed to generate short, segmented chips when working with demanding materials, improving chip control and operator safety. Predictable chip form reduces the risk of entanglement, improves coolant access to the cutting zone and helps maintain a stable cutting edge, which in turn supports consistent surface finish and dimensional accuracy. The controlled chip evacuation also lowers the likelihood of built-up edge formation during interrupted cuts. Optimised for rostfreier Stahl challenges Machining rostfreier Stahl presents specific difficulties: high toughness, tendency to form built-up edges and elevated heat in the cutting zone. The insert’s WMP32G chemistry and geometry address these by favouring secure chip formation and edge stability under such conditions. The material classification M denotes suitability for rostfreie Stähle, and the insert’s design balances flank protection with a geometry that supports reliable engagement, making it well suited for medium to robust operations without compromising tool life. Practical benefits for shop-floor integration As an indexable turning insert, this solution enables fast edge replacement and predictable tool behaviour across batches, which supports consistent throughput and quality control. The combination of coating, grade and chipbreaker promotes process security and reduces scrap risk in serial production. For operations seeking to harmonise productivity and reproducibility, the insert offers a practical route to stabilised cutting data and fewer unplanned interventions. Discuss specific cutting parameters and holder compatibility with Metav Werkzeuge to ensure optimal integration of the Walter Tools Tiger·tec Gold insert into the production line; contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support Technical specifications Article number: TS16-IR0.75ISO-WMP32G-WALTER Designation: TS16-IR0.75ISO WMP32G Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger·tec Gold Core data Material group: M Application group: rostfreier Stahl Grade family: Coated carbide Special features Tiger·tec Gold coating WMP32G coated carbide grade IR0.75ISO chipbreaker Suitable for medium to robust cutting conditions FAQ What materials is this insert designed for? The TS16-IR0.75ISO WMP32G insert is formulated for machining rostfreier Stahl (material group M) and provides stable cutting behaviour in those applications. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WMP32G grade improves wear resistance and thermal stability, which extends tool life and reduces the frequency of insert exchanges. What advantage does the IR0.75ISO chipbreaker offer? The IR0.75ISO chipbreaker produces controlled, short chips that aid evacuation, improve surface quality and lower the risk of built-up edge formation during rostfreier Stahl machining. Is this insert suitable for heavy interrupted cuts? The geometry and coating combination of this insert are optimised for medium to robust cutting conditions and support reliable performance under tougher engagements. Can this insert help reduce machine downtime? Yes; the wear resistance of the WMP32G grade and the predictable chip control from the IR0.75ISO chipbreaker contribute to fewer tool changes and more consistent production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is part of the global Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product from the manufacturer.
TS16-IR06RD WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, WMP32G reliability for rostfreier Stahl machining and precise chip control for consistent production results. Order the insert through Metav Werkzeuge or contact our specialists for application advice. Indexable turning insert TS16-IR06RD WMP32G by Walter Tools — Tiger·tec Gold, for rostfreier Stahl TS16-IR06RD WMP32G is an indexable turning insert designed for robust machining of rostfreier Stahl under medium to heavy conditions Tiger·tec Gold coating for extended tool life WMP32G grade optimised for rostfreier Stahl Coated carbide for reliable edge stability Longer tool life with Tiger·tec Gold for rostfreier Stahl The combination of the Tiger·tec Gold coating and the WMP32G carbide grade delivers a measurable improvement in wear resistance when working with rostfreier Stahl. The coating reduces flank wear and helps prevent adhesive built-up edge, which are common issues when machining tough, ductile stainless alloys. As a result, tool-change intervals are extended and component tolerances remain stable over longer production runs. This benefit converts directly into lower machine downtime and improved process reliability. Secure chip control and consistent cutting performance Equipped with the IR06RD chipbreaker geometry, the insert promotes stable chip formation even under variable cutting parameters. Predictable chip behaviour reduces the risk of surface damage and tool edge degradation, helping to maintain good surface finish and dimensional accuracy. The controlled chips also simplify coolant and chip management at the machine, supporting safer and cleaner shop-floor operations while keeping cycle times consistent. Practical advantages for production efficiency and repeatability Made as a coated carbide grade, the insert is engineered for repeatable performance in demanding turning tasks on materials classified as M (rostfreier Stahl). The coating and substrate pairing support a wide range of cutting speeds and feeds, making the insert a reliable choice for mixed-series production where set-up flexibility is required. Operators benefit from consistent edge stability, while production planners see improvements in tool-life predictability — both contributing to a lower total cost of ownership. For machining rostfreier Stahl with proven process security, consider the Walter Tools TS16-IR06RD WMP32G insert and contact Metav Werkzeuge for targeted recommendations and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TS16-IR06RD-WMP32G-WALTER Product: Indexable turning insert Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IR06RD Manufacturer: Walter Tools Facts ISO material group: M (rostfreier Stahl) Special features Coating technology: Tiger·tec Gold Substrate: coated carbide Application: machining of rostfreier Stahl Sort description: WMP32G — coated carbide grade for medium to robust conditions FAQ What materials is this insert suitable for? The TS16-IR06RD WMP32G insert is designed for rostfreier Stahl (ISO group M) and performs well under medium to robust cutting conditions. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WMP32G grade increases wear resistance and reduces built-up edge, which enhances tool life and process stability when turning rostfreier Stahl. Which chipbreaker is fitted and what does it achieve? The insert features the IR06RD chipbreaker, which ensures stable chip formation and predictable chip flow for safer and more consistent machining. Is this insert suitable for high-feed or heavy-roughing operations? The WMP32G grade and IR06RD geometry are optimised for medium to robust applications; suitability for heavy-roughing depends on specific cutting parameters and machine capability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, brand-new goods from the manufacturer (Walter Tools).
TS16-IR08ACME WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WMP32G grade for stable chip formation and extended tool life in stainless steel turning; order or request application support via Metav Werkzeuge for tailored cutting data and fast delivery. TS16-IR08ACME WMP32G indexable turning insert — Tiger·tec Gold coating for stainless steel machining by Walter Tools TS16-IR08ACME WMP32G is an indexable turning insert designed for reliable machining of stainless steels in medium to robust conditions, providing a predictable cutting edge and improved process stability. Tiger·tec Gold coating for long tool life Grade WMP32G for stainless steel IR08ACME chipbreaker for secure chip control Walter Tools process reliability and durability Improved productivity through coating and grade The combination of the Tiger·tec Gold coating with the WMP32G grade delivers measurable benefits for turning applications in stainless steel. The coated carbide construction reduces flank and crater wear under thermally demanding cuts, which leads to more consistent tool life and less unplanned tool changeovers. For production environments where uptime matters, this results in a more predictable machining process and better overall equipment effectiveness. Stable chip formation and edge security The IR08ACME chipbreaker is engineered to secure chip control during continuous and varying cut depths, promoting a steady chip flow and reducing risks of built-up edge. Stable chips lower the likelihood of surface damage and tool edge degradation, which means fewer reworks and improved surface finish consistency. Clear chip control also supports safer operations and simplified post-process handling on transfer lines. Integration into productive turning processes The TS16-IR08ACME geometry is compatible with standard toolholders for indexable turning systems and is aimed at shops that require repeatable, robust performance. The insert’s specification supports medium to robust machining scenarios in the ISO M material group (stainless steel), enabling shops to maintain high material removal rates while controlling tool wear. The coated grade reduces maintenance frequency and contributes to predictable cycle times. Practical application and material scope This insert is specifically developed for the ISO M category, meaning stainless steel applications that typically generate high heat and tend toward toughness. The WMP32G grade is tailored to these demands, balancing wear resistance with edge toughness to avoid premature failure. For unfamiliar alloys or specialised stainless grades, Metav Werkzeuge can provide cutting suggestions to match workpiece characteristics and machine capability. For process-stable stainless steel turning with Walter Tools Tiger·tec Gold grade, contact Metav Werkzeuge for tailored cutting data and fast delivery at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TS16-IR08ACME-WMP32G-WALTER Product name: Drehwendeschneidplatte / indexable turning insert TS16-IR08ACME WMP32G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR08ACME Facts No dimensional data provided in the source No thickness or corner radius specified Special features Coated carbide cutting grade (Tiger·tec Gold) Suitable for stainless steel (ISO group M) Designed for stable chip formation and secure cutting edge Intended for medium to robust machining conditions FAQ What materials is this insert suited for? This TS16-IR08ACME WMP32G insert is intended for the ISO M material group and is suited for machining stainless steel under medium to robust conditions. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WMP32G grade increases wear resistance and thermal stability, contributing to longer tool life and more consistent machining results. How does the IR08ACME chipbreaker help in production? The IR08ACME chipbreaker promotes controlled chip flow and helps prevent built-up edge, which enhances surface finish consistency and reduces the risk of process interruptions. Is this insert compatible with standard toolholders? The TS16-IR08ACME geometry is intended for common indexable turning systems; specific toolholder compatibility should be verified against the holder catalogue and application parameters. Can this insert be used for high-feed or interrupted cuts? The WMP32G grade is specified for medium to robust conditions; suitability for high-feed or heavily interrupted cuts depends on machine stability and cutting parameters, so application testing or consultation is recommended. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (marketed as Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and brand names belong to their respective owners. Mention of brand names and trademarks is for explanatory purposes only and does not imply any affiliation between our company and the manufacturers. The offered item is an original, factory-new product of the manufacturer.
TS16-IR08NPT WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, the IR08NPT chipbreaker for stable chip control and the WMP32G coated carbide for reliable performance in rostfreier Stahl applications – the result is predictable tool life and consistent surface quality. Order directly via Metav Werkzeuge or consult our specialists for process matching. TS16-IR08NPT WMP32G indexable turning insert by Walter Tools — Tiger·tec Gold, IR08NPT chipbreaker TS16-IR08NPT WMP32G is an indexable turning insert designed for medium to robust machining of rostfreier Stahl (ISO M), combining a Tiger·tec Gold coated carbide grade with a purpose-built IR08NPT chipbreaker for improved edge stability and chip control Tiger·tec Gold coated carbide for long tool life Optimised IR08NPT chipbreaker for stable chips Designed for rostfreier Stahl (ISO M) machining Walter Tools grade WMP32G for consistent performance Maximise process reliability with predictable chip control The combination of the Tiger·tec Gold coating and the WMP32G grade provides a technical basis for stable chip control when machining rostfreier Stahl. The IR08NPT chipbreaker is engineered to form short, controllable chips under medium to robust cutting parameters; this reduces the risk of built-up edge and decreases downtime caused by chip entanglement. For workshops aiming to lower scrap rates and improve first-pass yield, the turning solution delivers a measurable improvement in process repeatability without complex parameter changes. The insertion geometry promotes reproducible contact conditions at the cutting edge, which translates into consistent tool life and fewer unexpected tool changes. Practical benefits at the machine: better surfaces and fewer reworks When used in appropriate holders, this indexable insert supports a steady surface finish and reduces secondary operations. The coated carbide of the grade absorbs heat and resists abrasive wear, so finishing passes maintain dimensional stability for longer. The design is particularly beneficial for components where surface integrity and minimised post-process polishing are important, such as shafts and fittings made from rostfreier Stahl. By improving cutting-edge robustness, the solution helps shops increase throughput while maintaining the quality standards required in demanding sectors. The emphasis is on tangible gains: fewer reworks, predictable cycle times and a clearer cost-per-part calculation. Compatibility, handling and manufacturer assurance The TS16-IR08NPT series is produced to fit standard indexable turning toolholders and to integrate smoothly into existing machining setups. The WMP32G coating technology delivers a balance between toughness and wear resistance, helping to extend the usable life of the insert even under tougher conditions. Walter Tools’ manufacturing expertise ensures that the grade matches the application spectrum for rostfreier Stahl according to ISO group M. For complex applications or atypical materials, technical advisors can assist in selecting cutting parameters and insert geometries to match the process window, supporting a fast and reliable ramp-up on new parts. For a tailored recommendation based on the Tiger·tec Gold grade and the IR08NPT chipbreaker, contact Metav Werkzeuge for process advice and configurational support: info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: TS16-IR08NPT-WMP32G-WALTER Designation: TS16-IR08NPT WMP32G Type: Indexable turning insert Grade/Series: Tiger·tec Gold (WMP32G) Chipbreaker: IR08NPT Manufacturer: Walter Tools Facts ISO group suitability: M (rostfreie Stähle) Material designation: coated carbide Application scope: medium to robust cutting conditions Special features Optimised chip control geometry High edge stability for reduced built-up edge Consistent tool life and wear resistance Compatibility with standard turning holders FAQ What materials is the insert suitable for? The TS16-IR08NPT WMP32G insert is specified for rostfreier Stahl (ISO group M) and is optimised for medium to robust cutting conditions. How does the IR08NPT chipbreaker improve machining? The IR08NPT chipbreaker generates short, controllable chips that reduce entanglement and promote stable cutting forces; this supports longer tool life for the WMP32G grade. Is this insert compatible with standard toolholders? Yes, the insert is designed for common indexable turning holders and can be integrated without special adaptors, allowing quick replacement and process continuity. What benefit does the Tiger·tec Gold coating provide? Tiger·tec Gold enhances wear resistance and edge stability under elevated temperatures and abrasive conditions, which improves the performance of the WMP32G coated carbide grade. Can this grade handle interrupted cuts or heavier engagement? The WMP32G grade is formulated for robust conditions in rostfreier Stahl; for specific interrupted-cut scenarios, verify holder rigidity and cutting parameters to ensure optimal performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-IR08RD WMP32G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating, the WMP32G carbide grade and the IR08RD chipbreaker for reliable machining of stainless steel; the design supports stable chip formation and extended edge life. Order the TS16-IR08RD WMP32G directly via Metav Werkzeuge or ask our consultants if needed. TS16-IR08RD WMP32G – Indexable turning insert with IR08RD chipbreaker, Tiger·tec Gold for stainless steel (Walter Tools) The TS16-IR08RD WMP32G is an indexable turning insert engineered for controlled chip formation and consistent performance in machining stainless steel under medium to robust conditions. Tiger·tec Gold coating for long life Optimised IR08RD chip control Coated carbide grade WMP32G for stainless steel Reliable edge stability under robust conditions Increase productivity through controlled chip formation The combination of Tiger·tec Gold technology and a WMP32G coated carbide grade delivers improved process stability when machining demanding materials. The insert’s IR08RD chipbreaker supports predictable chip shapes that reduce interruptions and allow higher utilisation of cutting time. For operations that typically suffer from built-up edge and high thermal loads, this grade promotes consistent performance and reduced wear, which in turn lowers the frequency of insert changes and improves overall machine uptime. Achieve consistent surface quality with a stable cutting edge Materials in the ISO M group often present adhesion and heat-related challenges; the insert’s coated carbide construction and optimised geometry aim to limit built-up edge and maintain a stable edge during continuous cuts. This stability helps to secure repeatable surface finish outcomes and reduces the need for rework. The result is a predictable production process with fewer quality deviations and a reliable finish on components made from stainless steel. Practical application guidance for shop-floor decisions Designed for medium to robust cutting conditions, the insert is suited to operations where edge life and repeatability are priorities. The chip control characteristics minimise entanglement and make handling swarf easier in automated or manual setups. For shops seeking to standardise tooling, the grade’s balance of wear resistance and toughness supports a wide range of stainless-steel turning tasks while simplifying inventory through a versatile coated carbide solution. For reliable stainless steel turning with Tiger·tec Gold technology, contact Metav Werkzeuge for application advice and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TS16-IR08RD-WMP32G-WALTER Designation: TS16-IR08RD WMP32G Product type: Indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Facts Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR08RD Material class: M (stainless steel) Special features Coating/technology: Tiger·tec Gold Carbide type: Coated hardmetal (coated carbide) Suitable for: stainless steel machining Application conditions: medium to robust FAQ What materials is this insert suited for? The TS16-IR08RD WMP32G is optimised for machining stainless steel (ISO M), offering secure chip formation and enhanced edge life for these alloys. How does the IR08RD chipbreaker benefit production? The IR08RD chipbreaker produces controllable chip shapes that reduce interruptions and facilitate safer swarf handling, improving process reliability with the WMP32G grade. Is this grade suitable for high-temperature stainless-steel operations? The WMP32G coated carbide in the Tiger·tec Gold family is designed to handle the adhesion and heat challenges typical of stainless-steel turning, supporting extended tool life under elevated thermal loads. Can this insert be used in automated turning cells? Yes. The insert’s predictable chip control and edge stability make it appropriate for automated processes where consistent swarf behaviour and long tool life are required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only and do not imply any affiliation between our company and the named brands. The offered article is original, factory-new merchandise from the respective manufacturer.
TS16-IR08UN WMP22G Wendeplatten - Walter Tools
High productivity and secure chip control from the Tiger·tec Gold coating and the WMP22G grade make this insert a reliable choice for turning rostfreien Stahl; order directly via Metav Werkzeuge or consult the technical team for application guidance. TS16-IR08UN WMP22G — Indexable turning insert, Tiger·tec Gold (Walter Tools) The TS16-IR08UN WMP22G is a Tiger·tec Gold-coated indexable turning insert engineered for dependable machining of rostfreien Stahl in medium to robust cutting conditions. Tiger·tec Gold coating technology Grade WMP22G for rostfreien Stahl IR08UN chipbreaker for secure chip control Stable cutting edge for medium to heavy cuts Increased productivity through advanced coating The Tiger·tec Gold coating on this insert enhances thermal resistance and wear performance, resulting in extended tool life and more consistent process windows when machining challenging alloys. The WMP22G grade is a coated carbide formulation optimised for the M material group; this supports stable cutting edges under higher temperatures and reduces the frequency of tool changes, which helps improve component throughput and machine utilisation. The technical design targets dependable performance rather than marginal gains, making it suitable for repeatable production tasks. Consistent chip control for safer machining Equipped with the IR08UN chipbreaker, the insert promotes predictable chip formation and lowers the risk of built-up edge during operations on rostfreien Stahl. Controlled chips reduce process interruptions and help maintain surface integrity of the workpiece. The chip geometry is configured to direct swarf away from the cutting zone and to support coolant interaction where applicable. For users transitioning from uncoated grades, this combination delivers a measurable reduction in process variability and rework. Robust edge stability for medium to heavy cuts The insert geometry and the WMP22G grade are tuned for medium to robust cutting conditions, offering a balance between toughness and wear resistance. This makes the component particularly effective in interrupted cuts or jobs with variable material batches. Edge stability contributes to repeatable dimension control and predictable tool life, which simplifies machining planning and inventory management for production and maintenance teams. The specification emphasises pragmatic reliability over niche specialisation. Practical integration and handling benefits The TS16 designation indicates a standard indexable form that integrates with common clamping systems; the insert is straightforward to index and replace, reducing downtime at the toolchanger. The insert’s design supports consistent seating and repeatability, which is beneficial in serial production where positional accuracy of the insert affects part tolerances. Where process documentation is required, the coated carbide and chipbreaker data enable clear setup parameters and reproducible cycle-times for manufacturing planning. For robust rostfreien Stahl turning tasks, prefer the Walter Tools TS16-IR08UN WMP22G insert and contact Metav Werkzeuge for tailored application advice and supply coordination. Technical data Article number: TS16-IR08UN-WMP22G-WALTER Designation: TS16-IR08UN WMP22G Product type: Indexable turning insert Facts Grade: WMP22G Series: Tiger·tec Gold Chipbreaker: IR08UN Special features Coating: coated carbide (Tiger·tec Gold) Material group: M (rostfreie Stähle) Application: medium to robust cutting conditions FAQ What materials is this insert designed for? The TS16-IR08UN WMP22G insert is designed primarily for machining rostfreien Stahl (material group M), offering secure chip control and edge stability for these alloys. How does the Tiger·tec Gold coating benefit performance? The Tiger·tec Gold coating on the WMP22G grade improves thermal resistance and wear behaviour, which extends tool life and stabilises performance during continuous machining of rostfreien Stahl. What role does the IR08UN chipbreaker play? The IR08UN chipbreaker is engineered to produce predictable chips and to reduce built-up edge, supporting safer and more consistent machining with the TS16-IR08UN WMP22G insert. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com The Walter AG (brand: Walter Tools) with headquarters in Tübingen is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
TS16-IR08UN WMP32G WMP32G Wendeplatten - Walter Tools
Optimise turning operations with a focus on consistent edge stability and secure chip control thanks to the Tiger‑tec Gold coating and the IR08UN chipbreaker. Benefit from the WMP32G coated‑carbide grade for robust performance in stainless steel turning and order the insert via Metav Werkzeuge or consult our specialists for application advice. TS16-IR08UN WMP32G — Indexable turning insert, Tiger‑tec Gold coating (Walter Tools) TS16-IR08UN WMP32G is an indexable turning insert designed for demanding stainless steel machining, providing stable cutting edges and reliable chip formation in medium to robust conditions Tiger‑tec Gold coating for edge stability Optimised for stainless steel machining IR08UN chipbreaker for reliable chip control Coated carbide grade WMP32G for long life Stable cutting edges for tough stainless applications The Tiger‑tec Gold technology and WMP32G coated‑carbide substrate deliver pronounced edge stability when machining austenitic and other stainless grades. The coating reduces adhesion and thermal softening at the cutting edge, which helps to minimise built‑up edge and to maintain dimensional consistency across longer production runs. Where materials generate high heat and tend to work‑harden, this combination promotes predictable wear behaviour and improved surface quality, reducing rework and process interruptions. Controlled chips and improved process throughput The IR08UN chipbreaker is shaped to break and evacuate swarf reliably during turning operations on stainless steels, supporting safer machining and fewer stoppages. A well‑matched chip control geometry lowers the risk of long, stringy chips and improves coolant access at the cutting zone, which in turn can allow for more stable feed choices and enhanced productivity. The insert’s geometry enables consistent cutting performance that is beneficial for both batch production and continuous operations. Practical application guidance for reliable results This indexable insert is suited to medium and robust turning of stainless steel, where secure chip formation and sustained tool life are priorities. The coated‑carbide construction resists adhesive wear common with these workpieces and supports repeatable surface finishes. For best results, select a compatible toolholder and follow standard recommendations for coolant and cutting parameters appropriate to the workpiece. Regular indexation and visual inspection of the insert will preserve performance and reduce unexpected downtime when machining challenging stainless alloys with varying thermal behaviour. For reliable stainless steel turning with Walter Tools’ Tiger‑tec Gold inserts, contact Metav Werkzeuge for tailored advice and technical data at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS16-IR08UN-WMP32G-WALTER Product: Drehwendeschneidplatte TS16-IR08UN WMP32G Walter Tools Manufacturer: Walter Tools Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: IR08UN ISO designation: TS16-IR08UN WMP32G Facts ISO group: M Suitable material: stainless steel Special features Coated carbide Tiger‑tec Gold coating technology IR08UN chipbreaker geometry Indexable turning insert for robust stainless machining FAQ What materials is this insert intended for? The TS16-IR08UN WMP32G insert is designed primarily for stainless steel applications, matching the ISO group M for reliable chip formation and wear resistance. How does the Tiger‑tec Gold coating benefit cutting performance? Tiger‑tec Gold provides improved thermal and adhesive wear resistance on the WMP32G grade, helping to maintain edge stability and reduce built‑up edge during stainless steel turning. Which chipbreaker should be chosen for stringy chips in stainless steel? The IR08UN chipbreaker integrated in this insert is engineered to fragment and evacuate chips effectively under medium to robust cutting conditions typical of stainless steel workpieces. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Walter Tools is mentioned for identification purposes only. There is no affiliation between our company and the trademark owners. The offered article is an original, brand‑new product from the manufacturer.
TS16-IR08UN-F5 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating performance, the WMP32G carbide grade and proven chip control for efficient turning of stainless steels; order directly via Metav Werkzeuge or request advice from our specialists. TS16-IR08UN-F5 WMP32G indexable turning insert — coated carbide, Tiger‑tec Gold | Walter Tools The TS16-IR08UN-F5 WMP32G is an indexable turning insert engineered for reliable machining of stainless steels in medium to robust cutting conditions, offering stable chip formation and consistent edge performance. Tiger‑tec Gold coated carbide grade WMP32G Designed for stainless steel machining Stable chip formation in robust conditions Reliable cutting-edge performance Maximise throughput with consistent cutting performance The Tiger‑tec Gold coating combined with the WMP32G grade gives a balanced mix of wear resistance and fracture toughness, which translates into steady cutting speeds and fewer unscheduled tool changes. By stabilising the cutting edge and promoting controlled chip formation, the insert supports higher process uptime and predictable productivity. This results in measurable savings through reduced downtime and consistent component quality. Optimised for the challenges of stainless steels Materials in the M group (stainless steels) tend to be tough, prone to work hardening and generate heat at the cutting zone; the insert’s coated carbide grade and the integrated IR08UN‑F5 chipbreaker are designed to manage these effects. The chip control geometry reduces tendency for built-up edge and improves surface finish under moderate to robust conditions. For applications where thermal stability and secure chip evacuation matter, this turning solution offers a technical advantage. Practical guidance for reliable application The insert is intended for medium to heavy cutting tasks on rostfreie Stähle and performs best when paired with stable tooling and appropriate cutting parameters. The IR08UN‑F5 chipbreaker supports segmented chip formation, reducing entanglement and enabling safer high-material-removal rates. For machinists seeking repeatable results, the combination of geometry and Tiger‑tec Gold technology simplifies parameter selection and reduces the need for constant adjustment. Long-term process security and lower total cost of machining With an emphasis on stable cutting edges and reproducible performance, this insert helps to extend effective tool life and maintain part tolerances over longer runs. The balance between toughness and wear resistance promotes consistent results even in mixed batch production, so process planners benefit from fewer interruptions and higher first-pass yield. Choosing a grade tuned to stainless steels supports both quality and economy in production environments. For machining rostfreie Stähle with the proven Tiger‑tec Gold performance of Walter Tools, contact Metav Werkzeuge for tailored technical advice or to place an order by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: TS16-IR08UN-F5-WMP32G-WALTER Article name: Drehwendeschneidplatte TS16-IR08UN-F5 WMP32G Walter Tools Type: Indexable turning insert Series: Tiger‑tec Gold Grade: WMP32G Facts Material group: M (stainless steels) Chipbreaker: IR08UN‑F5 SKU: TS16-IR08UN-F5-WMP32G-WALTER UID: TS16-IR08UN-F5-WMP32G-WALTER Special features Coating technology: Tiger‑tec Gold Substrate: Coated carbide Application: rostfreie Stähle Manufacturer: Walter Tools FAQ What materials is this insert designed for? The insert is designed primarily for rostfreie Stähle (stainless steels); the WMP32G grade and Tiger‑tec Gold coating support machining in medium to robust conditions. Which chipbreaker is integrated and what does it do? The IR08UN‑F5 chipbreaker provides controlled chip segmentation to reduce entanglement and support secure chip evacuation during turning operations. Can the insert be used for finishing and roughing? The geometry and grade are suitable for medium to robust cutting; depending on the specific setup it can be used for semi‑finishing and roughing on stainless steel components. What benefits does the Tiger‑tec Gold series provide? Tiger‑tec Gold offers a combination of wear resistance and toughness that delivers stable cutting edges, improved tool life and enhanced process reliability for demanding stainless steel machining. Is the insert compatible with standard indexable turning toolholders? The insert follows the TS16‑design designation and is compatible with holders that accept this insert format; verify holder compatibility and clamping specification before mounting. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. The Walter Tools brand is mentioned for identification and explanatory purposes only. There is no affiliation between Metav Werkzeuge and Walter Tools beyond the sale of original, factory‑new products of the stated manufacturer.
TS16-IR08W WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of high process stability, a Tiger·tec Gold grade and optimised chip control for reliable turning of rostfreier Stahl; order or request application advice via Metav Werkzeuge for smooth integration into production. TS16-IR08W WMP32G indexable turning insert — Tiger·tec Gold, optimised for rostfreier Stahl (Walter Tools) A TS16-IR08W WMP32G indexable turning insert designed to provide stable chip formation and secure cutting edges when machining rostfreier Stahl under medium to robust conditions. Tiger·tec Gold coating technology WMP32G grade, coated cemented carbide Optimised for rostfreier Stahl machining Stable chip formation and edge security Higher process stability when machining rostfreier Stahl The Tiger·tec Gold grade WMP32G is a coated cemented carbide developed to address the specific challenges of machining rostfreier Stahl—materials that tend to be tough, prone to built-up edge and generate significant heat. The insert geometry combined with the chipbreaker IR08W promotes stable chip formation, reducing the risk of workpiece damage and unexpected downtime. In practical terms, this means a steadier cutting process and fewer interruptions during medium to robust turning operations. Longer tool life and consistent surface quality A coated substrate and a stable edge preparation deliver longer tool life and a consistently improved surface finish on turned components. The coating improves wear resistance and supports a secure cutting edge under elevated temperatures typical for rostfreier Stahl. As a result, the turning process can run for extended tool cycles with predictable performance, which benefits batch production and repetitive component manufacturing by reducing regrinding frequency and setup variance. How the insert assists in application and selection The chipbreaker designation IR08W indicates an insert profile geared towards secure chip control in tougher materials. Proper selection of grade and chipbreaker reduces recutting and eases chip evacuation. For workshops evaluating inserts for new turning operations, the combination of WMP32G grade and Tiger·tec Gold technology is suited to medium to robust cutting parameters. If further clarification on cutting parameters or grade matching is required, Metav Werkzeuge provides technical guidance to align insert choice with the intended machining strategy; contact via info@metav-werkzeuge.com or +49 2822 7131930 for additional application data. For machining rostfreier Stahl with the Walter Tools Tiger·tec Gold grade, contact Metav Werkzeuge for application guidance and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TS16-IR08W-WMP32G-WALTER ISO designation: TS16-IR08W WMP32G Type: Indexable turning insert Manufacturer: Walter Tools Facts Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IR08W Material group: M (rostfreie Stähle) Special features Coated cemented carbide Optimised chip formation Suited to medium to robust conditions FAQ What materials is the insert suitable for? The TS16-IR08W WMP32G insert is specified for machining rostfreier Stahl and is configured to manage the toughness and heat characteristics of these materials. What does the WMP32G grade offer? WMP32G is a Walter Tools coated carbide grade designed to improve edge security and wear resistance during medium to robust cutting of rostfreier Stahl. How does the IR08W chipbreaker affect performance? The chipbreaker IR08W promotes controlled chip formation and evacuation, lowering the likelihood of built-up edge and helping maintain a consistent cutting process. Is this insert intended for roughing or finishing? The combination of the WMP32G grade and IR08W chipbreaker suits operations where robust conditions are expected; parameter tuning determines whether it is used primarily for roughing or heavier finishing tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Brand names and protected trademarks are the property of their respective owners and are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is original, factory-new goods of the manufacturer Walter Tools.
TS16-IR09W WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold technology and the WMP32G grade for secure chip control and long-lasting cutting performance in rostfreier Stahl; order directly via Metav Werkzeuge or consult our specialists for application-specific selection and availability. TS16-IR09W WMP32G indexable turning insert, Tiger·tec Gold coated, Walter Tools The TS16-IR09W WMP32G is an indexable turning insert engineered for reliable machining of rostfreier Stahl in medium to robust cutting conditions. Tiger·tec Gold coated carbide grade Optimised chip formation for rostfreier Stahl Stable cutting edge for dependable tool life Suitable for medium to heavy turning Consistent cutting performance in challenging materials The combination of the Tiger·tec Gold coating and the WMP32G carbide grade promotes stable chip formation and reduces the tendency to build up material on the cutting edge when machining rostfreier Stahl. The surface treatment enhances heat resistance and wear protection, which translates into more predictable cutting cycles and fewer interruptions for edge dressing. For workshops that process corrosive‑resistant alloys, this balance of coating and substrate supports consistent part quality and lowers the frequency of unexpected tool changes. Improved process security and predictable surface quality Equipped with the IR09W chipbreaker geometry and a purpose‑matched substrate, this insert is designed to maintain a stable cutting edge under variable conditions. The geometry assists controlled chip flow and reduces entanglement, contributing to a consistent surface finish on turned components. In short production runs and serial machining alike, the insert’s controlled chip behaviour helps to maintain cycle stability and to protect machine uptime, supporting efficient shopfloor planning and throughput. Practical integration and selection advantages for busy shops The insert’s specification supports straightforward grade selection for rostfreier Stahl applications and reduces the need for trial‑and‑error setups. The coated carbide construction offers a compromise between wear resistance and toughness, making it appropriate for a range of feeds and depths of cut without frequent requalification. When tool life and process reliability are priorities, the combination of coating technology and grade selection enables a repeatable manufacturing result and easier process documentation for quality assurance. Contact Metav Werkzeuge for tailored application advice and stock information – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS16-IR09W-WMP32G-WALTER Product name: TS16-IR09W WMP32G Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Grade/series: WMP32G / Tiger-tec Gold Facts Material group: M Main application: rostfreier Stahl Chipbreaker: IR09W Special features Coating: Tiger·tec Gold Substrate: coated carbide Targeted use: medium to robust machining of rostfreier Stahl ISO designation: TS16-IR09W WMP32G FAQ What materials is this insert designed for? The answer: The WMP32G grade is optimised for machining rostfreier Stahl; the TS16-IR09W WMP32G insert from Walter Tools supports safe chip formation in these alloys. Which chipbreaker does the insert use? The TS16-IR09W WMP32G is fitted with the IR09W chipbreaker, designed to promote controlled chip flow and stable cutting when working with rostfreier Stahl. Is the coating suitable for high temperatures? Yes, the Tiger·tec Gold coating on the WMP32G grade increases heat resistance and wear protection, improving performance during thermal loads associated with rostfreier Stahl machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
TS16-IR1.0ISO WMP22G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold technology and the WMP22G coated‑carbide grade for secure machining of stainless steel; the IR1.0ISO chipformer ensures stable chip control and consistent edge life. Order the inserts directly via Metav Werkzeuge or consult the technical team for process optimisation. TS16-IR1.0ISO WMP22G turning insert – Tiger‑tec Gold coating, for stainless steel (Walter Tools) The TS16-IR1.0ISO WMP22G is a coated carbide turning insert from Walter Tools designed for dependable stainless steel machining in medium to robust conditions. Tiger‑tec Gold coating technology Optimised chip control with IR1.0ISO Grade WMP22G for stainless steel Stable cutting edge and process security Better chip control for difficult‑to‑machine stainless steels The combination of the IR1.0ISO chipformer and the Tiger‑tec Gold coating provides notably improved chip control when machining austenitic and other stainless steels. These materials tend to be tough and generate heat; the specific chip geometry promotes predictable chip formation and evacuation, which reduces the risk of built‑up edge and minimises interruptions. In practice, this means fewer manual interventions at the lathe and a smoother, more productive turning process for components made of stainless steel. Longer edge life and reliable cutting performance The WMP22G grade is a coated carbide engineered to balance wear resistance and edge toughness for medium to heavy cutting conditions. The coating technology supports thermal stability and abrasion resistance while maintaining a robust cutting edge, so tool life is extended without sacrificing surface finish. For production environments where repeatability matters, the insert helps maintain dimensional accuracy and reduces the frequency of insert changes, contributing to lower overall process downtime. Clear selection and safe process integration Selecting the right insert geometry and chipbreaker is essential for consistent results. The TS16‑IR1.0ISO series offers an ISO‑designated chipformer that fits standard turning toolholders and is intended for general stainless steel applications (ISO group M). For shops adapting to varied batch sizes, this insert simplifies tooling choices: the coated carbide grade and chip control are suitable for turning operations that demand a balance of productivity and component quality. If specific cutting parameters are required, Metav Werkzeuge’s consultants can advise on speeds, feeds and coolant strategies to match the application. Contact Metav Werkzeuge for tailored advice on using Walter Tools TS16-IR1.0ISO WMP22G inserts in stainless steel machining and to place an order directly via their product specialists at Metav Werkzeuge. Technical Data Article number: TS16-IR1.0ISO-WMP22G-WALTER Label: Drehwendeschneidplatte TS16-IR1.0ISO WMP22G Walter Tools Product type: Turning insert Series: Tiger‑tec Gold Grade: WMP22G Chipformer: IR1.0ISO Material group: M (stainless steel) Facts No explicit dimensional data provided No tolerance class specified No edge radius specified Special features Coating technology: Tiger‑tec Gold Material: Coated carbide Application: Machining of stainless steel (ISO M) Designed for medium to robust cutting conditions Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The TS16‑IR1.0ISO WMP22G insert is intended for machining stainless steel (ISO group M), optimised for medium to robust cutting conditions. Which chipformer does the insert use and what is its benefit? The insert features the IR1.0ISO chipformer, which improves chip control and helps prevent built‑up edge when turning stainless steels. How does the Tiger‑tec Gold technology affect performance? Tiger‑tec Gold coating enhances thermal stability and wear resistance of the WMP22G grade, supporting longer edge life and consistent surface quality in demanding stainless steel operations. Can this insert be used in standard toolholders? Yes, the TS16‑IR1.0ISO geometry is ISO‑designated and fits common turning toolholders compatible with the TS16 insert family. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter Tools brand is a registered trademark of Walter AG. Protected trademarks and product names belong to their respective owners and are mentioned solely for explanatory purposes. There is no affiliation between Metav Werkzeuge and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
TS16-IR1.0ISO WMP32G Wendeplatten - Walter Tools
Taking advantage of Tiger‑tec Gold technology and the WMP32G coated‑carbide grade, this insert delivers reliable chip control and long tool life in the machining of stainless steel; combine stable cutting performance with predictable edge behaviour for uninterrupted production. Order the insert via Metav Werkzeuge or consult the technical team for application advice. TS16-IR1.0ISO WMP32G indexable turning insert — Tiger‑tec Gold grade for stainless steel by Walter Tools The TS16-IR1.0ISO WMP32G is an indexable turning insert engineered for ISO turning of stainless steels under medium to robust cutting conditions, offering a balance of chip control and wear resistance. Tiger‑tec Gold coating extends tool life Optimised for stainless steel (ISO group M) IR1.0ISO chipbreaker for stable chips Coated carbide grade WMP32G for robustness Reliable machining of stainless steel with sustained performance The combination of Tiger‑tec Gold coating and the WMP32G carbide grade provides a dependable solution for machining stainless steel where heat and material toughness can compromise edge life. The specialised coating enhances wear resistance and reduces adhesion, which in turn mitigates the risk of built‑up edge that commonly affects austenitic and martensitic stainless grades. This leads to improved process stability and fewer unscheduled tool changes, supporting predictable machining cycles and a consistent surface finish. The construction of the insert supports medium to robust cutting parameters while maintaining edge integrity across longer production runs. Predictable chip control that eases downstream handling The IR1.0ISO chipbreaker geometry is designed to produce short, controllable chips when turning stainless steels, which are known for producing long, stringy swarf. Controlled swarf breakage reduces entanglement at the tool nose and minimises interruptions to automated machining processes. For customers unfamiliar with chipbreaker terminology: a chipbreaker is a specially formed geometry on the cutting face that shapes chips as they form, promoting safe evacuation and reducing the need for manual intervention. The result is a measurable benefit in throughput and operator safety, with lower downstream cleaning time and less risk of rework due to chip damage. Minimised downtime through robust edge behaviour and wear resistance By combining a coated carbide substrate with the Tiger‑tec Gold technology, the insert supports a stable cutting edge under variable conditions. The grade is tuned to handle the thermal and mechanical demands of stainless steel, offering resistance against notch wear and flank wear that typically shorten tool life. This means fewer indexings and replacements, which translates into reduced tool inventory rotation and lower lifecycle costs for tooling when compared with uncoated or generic grades. The predictable wear characteristics also simplify process planning and quality control, helping to safeguard component tolerances throughout a production batch. Practical fit for workshop workflows and tooling systems Designed as a standard indexable insert for common turning systems, the item integrates into conventional toolholders without special adaptations. Its ISO designation and clear grade marking support easy identification and inventory management on the shop floor. For applications requiring a balance of productivity and reliability in stainless‑steel turning—such as valve components, shafts and fittings—this insert offers a pragmatic compromise between cutting performance and tool longevity. Where process optimisation is a priority, the insert’s behaviour under typical feeds and depths helps engineers set stable parameter windows with confidence. For application guidance or to secure the correct Walter Tools Tiger‑tec Gold inserts for a specific stainless‑steel task, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for procurement and technical consultation. Technical Data Article number: TS16-IR1.0ISO-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-IR1.0ISO WMP32G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Facts ISO designation: TS16-IR1.0ISO WMP32G Grade: WMP32G Material code: M Application group: M (stainless steel) Special features Series: Tiger‑tec Gold Chipbreaker: IR1.0ISO Material: Coated carbide (WMP32G) Recommended conditions: Medium to robust cutting for stainless steel FAQ What materials is this insert intended for? The TS16-IR1.0ISO WMP32G insert from Walter Tools is specified for ISO group M materials, i.e. stainless steels, where toughness and heat generation demand coatings and grades that support secure chip formation and wear resistance. What does the WMP32G grade signify? WMP32G is a Walter Tools coated‑carbide grade within the Tiger‑tec Gold family, formulated to provide a balance of wear resistance and edge strength specifically for machining stainless steel under medium to robust conditions. How does the IR1.0ISO chipbreaker improve machining? The IR1.0ISO geometry produces short, manageable chips in turning operations, reducing swarf entanglement and easing automatic chip evacuation, which benefits both safety and uninterrupted production. Is this insert suitable for high‑precision finishing? The coated grade and stable edge behaviour support consistent surface quality in many finishing operations; however, final surface results depend on the complete tooling system and cutting parameters chosen for the specific stainless‑steel alloy. How does Tiger‑tec Gold coating affect tool life? The Tiger‑tec Gold coating enhances wear resistance and reduces adhesion tendency on stainless steels, which typically results in longer effective tool life and more predictable wear patterns during batch production. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are mentioned solely for clarification. There is no affiliation between our company and the named manufacturers. The offered item is an original factory‑new product of the stated manufacturer.
TS16-IR1.0ISO-3 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of cost-efficiency, process stability and optimised chip control for consistent turning of stainless steel. Order the insert directly via Metav Werkzeuge or ask our consultants for tailored application advice. TS16-IR1.0ISO-3 WMP32G indexable turning insert — Tiger·tec Gold, for stainless steel | Walter Tools TS16-IR1.0ISO-3 WMP32G is a coated carbide indexable turning insert designed for medium to robust turning of stainless steel, delivering a balance of cutting performance and tool life. Tiger·tec Gold coating performance WMP32G: coated carbide grade Optimised chip control for stainless steel Stable cutting edge for long tool life Precision turning where material demands are highest The combination of the WMP32G grade and Tiger·tec Gold technology supports reliable machining of stainless steel under demanding conditions. The coated carbide composition ensures a predictable wear behaviour and reduced tendency to build up on the edge, which translates into fewer interruptions and more reliable cycle times. For production environments that require consistent component quality, this insert provides a measurable advantage in maintaining dimensional tolerances and repeatability. Better chip control and improved surface finish The integrated IR1.0ISO-3 chipbreaker is configured to promote secure chip formation when machining tougher, ductile alloys. Improved chip control reduces the risk of entanglement and tool-induced vibration, which in turn enhances the achievable surface finish and decreases rework. In practice, this means fewer stoppages for chip clearing and a steadier feed-to-speed window that supports higher effective productivity. Long tool life through thermal and edge stability The Tiger·tec Gold coating contributes to increased wear resistance and thermal stability at elevated cutting temperatures typical for stainless steel. A stable cutting edge and controlled wear progression help extend tool life and reduce the frequency of insert changes. The net effect is a more economical process: lower tooling consumption, fewer changeovers and reduced downstream quality variation — all factors that support a competitive machining operation. Application advice and integration into production The insert is suited for general turning operations on stainless steel where medium to robust cutting conditions prevail. The designation TS16 indicates the insert family and clamping geometry; users should verify toolholder compatibility before assembly. For specific feed and speed recommendations or to confirm suitability for a particular stainless alloy and machining centre, Metav Werkzeuge can provide application data and matching tooling accessories to ensure a seamless integration into existing processes. Choose the Walter Tools Tiger·tec Gold grade for dependable stainless steel turning and contact Metav Werkzeuge for application support and procurement at info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data Article number: TS16-IR1.0ISO-3-WMP32G-WALTER Designation: TS16-IR1.0ISO-3 WMP32G Product type: indexable turning insert Manufacturer/Brand: Walter Tools Grade: WMP32G Series: Tiger·tec Gold Core data Size code: TS16 Chipbreaker: IR1.0ISO-3 Material group: M (stainless steels) Special features Coating technology: Tiger·tec Gold Material of insert: coated carbide (WMP32G) Application: machining of stainless steel Typical use: medium to robust turning conditions FAQ Which materials is this insert intended for? The TS16-IR1.0ISO-3 WMP32G indexable turning insert is designed primarily for stainless steel (material group M according to ISO classification) and performs best under medium to robust cutting conditions. What does the WMP32G grade mean for performance? WMP32G denotes a coated carbide grade optimised for secure chip formation and enhanced wear resistance when machining stainless steel, providing a balance between tool life and cutting performance. How does the IR1.0ISO-3 chipbreaker affect machining? The IR1.0ISO-3 chipbreaker promotes controlled chips and reduced vibration during turning, which improves surface quality and lowers the risk of chip-related interruptions in production. Can this insert be used in existing toolholders? Compatibility depends on the holder geometry corresponding to the TS16 family; confirm the clamping interface and insert seat before installation. If needed, Metav Werkzeuge can advise on suitable toolholders and clamping systems. How to optimise cutting parameters for this insert? Start with manufacturer-recommended ranges for feed and cutting speed for stainless steel, then adjust based on actual alloy, machine rigidity and coolant strategy; the WMP32G grade tolerates robust conditions but benefits from process verification. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, brand-new product of the manufacturer (Walter Tools).
TS16-IR1.0ISO-F5 WMP32G Wendeplatten - Walter Tools
The combination of the Tiger·tec Gold coating, the WMP32G grade and the IR1.0ISO‑F5 chipbreaker delivers reliable performance and stable chip control in demanding stainless steel turning. Order the TS16-IR1.0ISO-F5 WMP32G directly via Metav Werkzeuge or ask our consultants if needed. TS16-IR1.0ISO-F5 WMP32G indexable turning insert — Tiger·tec Gold grade by Walter Tools The TS16-IR1.0ISO-F5 WMP32G is a coated carbide indexable turning insert optimised for machining stainless steel under medium to robust conditions Tiger·tec Gold coating for long tool life Designed for stainless steel (ISO M) machining Stable chip control with IR1.0ISO‑F5 chipbreaker Consistent cutting performance for stainless steels The combination of the Tiger·tec Gold coating and the WMP32G grade provides a wear-resistant, coated carbide solution that addresses the typical challenges of machining stainless steel, such as high heat generation and built-up edge. The grade supports stable chip formation and a durable cutting edge, which reduces the frequency of index changes and contributes to smoother production cycles. This results in measurable improvements in process reliability and predictable tool life, especially where repeatability is required. Better chip control and improved surface finish The dedicated IR1.0ISO‑F5 chipbreaker is designed to manage chips effectively when turning tough, ductile materials. By promoting consistent chip segmentation and evacuation, the chipbreaker reduces the risk of entanglement and vibration, leading to a finer surface finish and fewer secondary operations. For operators and programming engineers this means fewer interruptions and a clearer path to meeting dimensional and cosmetic tolerances without excessive finishing. Operational benefits that support productivity Using a grade tailored for stainless applications simplifies tooling decisions on the shop floor. The insert’s characteristics support a stable cutting edge under varied cutting conditions, which lowers tool-change frequency and downtime. From a cost-efficiency perspective, the balance of coating technology and substrate hardness contributes to lower total machining costs per component through extended intervals between regrinds or replacements and improved first-pass yields. Suitable uses and process placement This turning insert is intended for conventional turning operations on materials classified under ISO M (stainless steels). It is particularly suited to parts where frequent thermal loading and material adhesion would otherwise lead to premature wear. In machine setups where secure clamping and correct coolant strategy are applied, the insert helps maintain consistent component quality across production batches. For dependable workshop performance choose Walter Tools Tiger·tec Gold inserts and contact Metav Werkzeuge for tailored application advice and quick availability. Technical data Article number: TS16-IR1.0ISO-F5-WMP32G-WALTER Description: TS16-IR1.0ISO-F5 WMP32G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Material group: ISO M (stainless steel) Grade: WMP32G Chipbreaker: IR1.0ISO‑F5 Product type: Indexable turning insert Special features Coating technology: Tiger·tec Gold Substrate: coated carbide Optimised for stable chip formation Suited to medium to robust cutting conditions Intended for turning operations on stainless steels FAQ What materials is this insert suitable for? The TS16-IR1.0ISO‑F5 WMP32G is specified for materials in the ISO M group, primarily stainless steels, where ductility and heat generation are significant machining factors. How does the Tiger·tec Gold coating help in production? The Tiger·tec Gold coating on this grade improves wear resistance and thermal stability, allowing the insert to maintain a sharper edge for longer and reducing unexpected tool changes. What role does the IR1.0ISO‑F5 chipbreaker play? The IR1.0ISO‑F5 chipbreaker actively controls chip formation to avoid long, stringy chips, improving evacuation and reducing the risk of machine or workpiece damage. Is this insert suitable for high-speed turning? The WMP32G grade is optimised for robust stainless steel machining; selection for high-speed applications should consider machine rigidity and cooling strategy to ensure cutting stability. Can the insert be used in small-batch as well as mass production? Yes, the design and grade of the TS16-IR1.0ISO‑F5 WMP32G support both small-batch prototypes and serial production by offering predictable tool life and consistent surface quality. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no association between our company and the named manufacturers. The offered article is an original, factory-new product from the manufacturer.
TS16-IR1.0ISO-M5 WMP32G Wendeplatten - Walter Tools
Benefit from a combination of durable coating and a chipforming geometry that keeps processes stable when machining stainless steels; the Tiger·tec Gold technology and WMP32G grade extend cutting performance under medium to robust conditions. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. TS16-IR1.0ISO-M5 WMP32G indexable turning insert, Tiger·tec Gold coating — Walter Tools (for stainless steel) TS16-IR1.0ISO-M5 WMP32G is a coated carbide indexable turning insert engineered for reliable, repeatable turning of stainless steels in demanding production environments Tiger·tec Gold coating for wear resistance WMP32G grade optimised for stainless steel IR1.0ISO-M5 chipbreaker for stable chips Consistent edge life under robust conditions Reliable machining of stainless steels with reduced built-up edge The combination of Tiger·tec Gold coating and the WMP32G carbide grade provides enhanced resistance to abrasive and adhesive wear typical of austenitic stainless steels. The coating reduces friction at the cutting edge, which helps to lower adhesion and the formation of a built-up edge — a common cause of poor surface finish and interrupted production. This means more consistent component quality and fewer unplanned tool changes during medium to robust turning tasks. Stable chip control that secures process efficiency The IR1.0ISO-M5 chipbreaker is designed for dependable chip formation when cutting materials in the ISO M group. Controlled chip flow reduces the risk of entanglement and vibration, which in turn supports process stability and improves surface finish. For production settings where cycle consistency and machine uptime matter, the chip geometry contributes directly to higher overall productivity and predictable tool life. Practical benefits for production planning and maintenance As an indexable insert, this product allows fast tool replenishment with minimal setup time, supporting lean workflow in batch or continuous operations. Indexability means the cutting edge can be rotated or replaced without regrinding, lowering maintenance effort and inventory complexity. The WMP32G grade is tailored for the typical challenges of stainless-steel turning, offering a balance between edge strength and wear resistance that suits mixed-production environments. Application guidance and material fit The insert is classified for ISO group M, which denotes suitability for stainless steels. In practice, this implies good performance on austenitic and other stainless alloys that present high ductility and heat sensitivity. The coated carbide construction helps to manage heat generation at the cutting zone and supports stable chipbreaking under medium to robust cutting conditions. For application-specific parameters or feed and speed suggestions, Metav Werkzeuge’s advisors can provide tailored guidance based on the component geometry and machining setup. Contact Metav Werkzeuge for expert machining recommendations and procurement support for Tiger·tec Gold WMP32G inserts supplied by Walter Tools Technical Data Article number: TS16-IR1.0ISO-M5-WMP32G-WALTER Product: TS16-IR1.0ISO-M5 WMP32G indexable turning insert Manufacturer: Walter Tools Facts Material group: M (stainless steels) Series: Tiger·tec Gold Chipbreaker: IR1.0ISO-M5 Special features Coating/grade: WMP32G (coated carbide) Application: machining stainless steels (ISO group M) Family: Tiger·tec Gold Stable chip control; optimised for medium to robust conditions FAQ Which materials can be machined with this insert? The TS16-IR1.0ISO-M5 WMP32G insert is intended for ISO group M materials, specifically stainless steels, and is formulated to handle the ductility and heat sensitivity inherent to these alloys. What are the main benefits of the Tiger·tec Gold coating? The Tiger·tec Gold coating on the WMP32G grade reduces friction and improves wear resistance, which helps to control built-up edge and extend effective cutting life during turning of stainless steels. How does the IR1.0ISO-M5 chipbreaker affect production? The IR1.0ISO-M5 chipbreaker promotes consistent chip formation and evacuation, leading to greater process stability, improved surface finish and fewer interruptions in production. Is the insert suitable for heavy cutting conditions? The WMP32G grade is designed for medium to robust conditions on stainless steels; its balance of edge strength and wear resistance supports demanding turning operations without sacrificing repeatability. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original factory-new goods of the manufacturer.
TS16-IR1.25ISO WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP22G grade and the IR1.25ISO chipbreaker to ensure stable chip formation and longer tool life when machining stainless steels; order these inserts via Metav Werkzeuge or consult the Metav team for application support. TS16-IR1.25ISO WMP22G turning indexable insert for stainless steel — Walter Tools The TS16-IR1.25ISO WMP22G is a turning indexable insert engineered for secure chip control and reliable edge stability in stainless steel turning operations. Tiger·tec Gold coating for high wear resistance Optimised IR1.25ISO chipbreaker for stable chips Grade WMP22G for stainless steel machining Consistent cutting edge for reliable performance Longer tool life through advanced coating and grade The combination of the Tiger·tec Gold coating and the WMP22G grade delivers pronounced wear resistance and edge stability in demanding conditions. As a coated cemented carbide, the insert resists abrasive and adhesive wear better than uncoated grades, which reduces the frequency of tool changes and supports continuous production runs. For machining stainless steel, where toughness and heat generation can promote built-up edge, this grade helps maintain dimensional consistency and component quality over longer cycle times. Predictable chip control for safer, cleaner turning The IR1.25ISO chipbreaker geometry is designed to produce compact, controllable chips when cutting ductile materials. Controlled chip formation reduces the risk of entangled swarf, improves machine availability and contributes to an improved surface finish. The insert’s chip management also simplifies swarf handling and minimises secondary operations to remove problematic chips, thereby enhancing overall productivity and process reliability in serial and batch production. Clear application fit and practical machining benefits Classified for material group M according to ISO 513, this insert is intended for stainless steel applications that typically require robust edge behaviour and secure chip formation. For operators less familiar with classifications: M denotes materials that tend to be tough and prone to stringy chips and high temperatures; suitable insert grades and chipbreakers counteract these tendencies to reduce downtime. The combination of a coated carbide substrate and the optimised chipbreaker supports consistent part quality and repeatable results in production environments. For stainless steel turning applications, request the Walter Tools TS16-IR1.25ISO WMP22G inserts from Metav Werkzeuge for proven process stability — contact Metav Werkzeuge for tailored machining advice by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number / SKU: TS16-IR1.25ISO-WMP22G-WALTER Product name: Drehwendeschneidplatte TS16-IR1.25ISO WMP22G Walter Tools Product type: Turning indexable insert Manufacturer: Walter Tools Facts Series: Tiger·tec Gold Grade: WMP22G Chipbreaker: IR1.25ISO Material group: M (stainless steel) Special features Coated cemented carbide Suitable for stainless steel machining Optimised chip control Stable cutting edge for reliable performance FAQ What materials is this insert suitable for? This insert is specified for stainless steel applications; the WMP22G grade and Tiger·tec Gold coating support machining of M-class materials. How does the IR1.25ISO chipbreaker improve machining? The IR1.25ISO geometry produces controlled, short chips that reduce entanglement and aid in achieving a consistent surface finish, improving process stability during turning. Is the WMP22G grade coated or uncoated? WMP22G is a coated cemented carbide grade, featuring the Tiger·tec Gold coating technology for enhanced wear resistance and edge life. Which production environments benefit most from this insert? Workshops and production lines machining stainless steel—from component finishing to serial turning—benefit from the stable edge life and predictable chip control offered by this insert. How does the insert help with built-up edge issues? The combination of the coating, the carbide substrate and the chipbreaker geometry reduces adhesion and stabilises the cutting edge, lowering the incidence of built-up edge commonly seen with austenitic stainless steels. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com