TS16-IR1.25ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of the premium WMP32G grade, the Tiger·tec Gold coating and the IR1.25ISO chipbreaker for reliable machining of stainless steels; the result is stable chip control, predictable tool life and fewer process interruptions. Order the insert directly via Metav Werkzeuge or request application advice from our consultants. TS16-IR1.25ISO WMP32G – Indexable turning insert, Tiger·tec Gold grade for stainless steel by Walter Tools A TS16-IR1.25ISO WMP32G indexable turning insert designed for secure chip formation and consistent cutting performance when machining stainless steels under moderate to robust conditions Tiger·tec Gold coated carbide grade WMP32G Optimised for rostfreier Stahl (ISO group M) IR1.25ISO chipbreaker for stable chip control High process security and predictable tool life Predictable chip control that reduces interruptions The combination of the IR1.25ISO chipbreaker and the WMP32G grade delivers stable chip formation when cutting stainless steels, a material group prone to toughness and built-up edge. The chipbreaker geometry guides chips reliably away from the cut, which reduces the risk of surface damage and machine stoppages. As a consequence, production runs become more consistent and downtime for manual chip clearance is minimised, supporting continuous machining cycles. Coating and grade engineered for longer service life The insert’s Tiger·tec Gold coating on a coated carbide substrate improves wear resistance and thermal stability at elevated cutting temperatures typical of rostfreier Stahl operations. The coating helps to maintain a sharp cutting edge for longer, which translates into extended tool life and fewer indexings or insert changes. For workshops seeking reproducible component quality, this results in lower per-part tooling effort and steadier process windows. Process benefits for shop-floor productivity Using this insert in a suitable toolholder provides high process security through repeatable cutting behaviour and predictable edge performance. The grade is specified for ISO group M, which means it is tuned for stainless steels and similar materials where heat and adhesion are challenges. The net effect is improved surface finish and fewer rejects, making the insert well suited to batches where consistency matters as much as throughput. Practical application and integration guidance For safe integration, match the insert geometry to a compatible turning holder and apply cutting data that reflects the workpiece condition and toolholder rigidity. The IR1.25ISO chipbreaker is particularly helpful when moderate depths of cut produce continuous chips; for heavy interrupted cuts consider appropriate machining strategy adjustments. For precise cutting parameters tailored to specific machines and workpieces, Metav Werkzeuge provides application advice and data sheets to support optimum set-up. For machining rostfreier Stahl with Tiger·tec Gold reliability, contact Metav Werkzeuge for tailored application support and availability — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: TS16-IR1.25ISO-WMP32G-WALTER Designation: TS16-IR1.25ISO WMP32G Product type: Indexable turning insert Brand: Walter Tools Facts Suitable material group: M (rostfreie Stähle) No dimensional data provided Special features Grade: WMP32G (coated carbide) Series: Tiger·tec Gold Chipbreaker: IR1.25ISO Application focus: rostfreier Stahl (stainless steel) Benefits: stable chip formation, extended tool life, process security FAQ What materials is this insert designed for? The insert is specified for ISO group M and is intended for machining rostfreier Stahl (stainless steel), where its WMP32G grade and Tiger·tec Gold coating support reliable chip control. How does the IR1.25ISO chipbreaker affect performance? The IR1.25ISO chipbreaker promotes controlled chip breaking and evacuation, reducing the risk of built-up edge and improving surface finish when cutting stainless steels with the TS16-IR1.25ISO WMP32G insert. Is the WMP32G grade suitable for robust cutting conditions? Yes. WMP32G is engineered for moderate to robust conditions on rostfreier Stahl, offering a balance of wear resistance and edge stability for predictable machining. Can the insert be used for finishing and semi-finishing operations? The combination of the Tiger·tec Gold coating and the IR1.25ISO chipbreaker allows the insert to deliver good surface quality in finishing and reliable performance in semi-finishing when set up with appropriate cutting data. Where can application data and availability be obtained? Application recommendations and stock information are available from Metav Werkzeuge; their consultants can provide cutting parameters and holder compatibility for the TS16-IR1.25ISO WMP32G insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tooling for metalworking. Protected trademarks and product names are the property of their respective owners; brand names are used here for explanation only and do not imply any affiliation with Metav Werkzeuge.
TS16-IR1.5ISO WMP22G Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Gold coating and the WMP22G grade together with the IR1.5ISO chipbreaker provides robust chip control and extended edge life when machining stainless steel; order directly via Metav Werkzeuge or consult their specialists for process matching. TS16-IR1.5ISO WMP22G Indexable Turning Insert – Tiger-tec Gold for stainless steel (Walter Tools) A TS16-IR1.5ISO WMP22G indexable turning insert engineered for stable cutting and reliable chip formation when turning stainless steel under medium to robust conditions. Tiger·tec Gold coating for extended life Optimised IR1.5ISO chip control Grade WMP22G for stainless steel Suitable for medium to robust cutting conditions Consistent performance for demanding stainless-steel turning The Tiger·tec Gold combination in this insert delivers enhanced wear resistance and a reliably shaped cutting edge for materials in the ISO M group. The coated carbide substrate, specified as WMP22G, is selected to reduce built-up edge and maintain a stable cutting geometry during interrupted or heavy cuts. As a result, the insert contributes to predictable tool life and consistent dimensional accuracy in serial production. Predictable chip control and process efficiency The IR1.5ISO chipbreaker is designed to break and evacuate chips typically formed when machining stainless steel, a material prone to long, stringy chips and high thermal loads. Controlled chip formation reduces the risk of workpiece damage and machine downtime, improving cycle times and operator safety. The insert’s geometry supports steady cutting forces and helps to preserve the cutting edge, which yields fewer tool changes and higher overall productivity. Practical benefits in the workshop and on the shop floor Selected for medium to robust machining conditions, this indexable insert supports industrial turning operations where repeatability and reliability are essential. The coated grade and chipbreaker work together to offer a balance between process security and tool economy: longer intervals between indexings, less rework due to edge wear, and a more stable surface finish on stainless components. Compatibility with standard turning toolholders must be verified prior to use. Contact Metav Werkzeuge for application recommendations on Walter Tools Tiger·tec Gold inserts and tailored supply options – their technical advisers are available to assist with cutting data and selection. Technical Data Article number: TS16-IR1.5ISO-WMP22G-WALTER Designation: TS16-IR1.5ISO WMP22G Product type: Indexable turning insert Manufacturer: Walter Tools Facts Series: Tiger·tec Gold Grade: WMP22G Chipbreaker: IR1.5ISO Material group (ISO): M (stainless steel) Suitable for: stainless steel (ISO M) Special features Coated carbide (Tiger·tec Gold technology) Stable chip formation for ISO M materials Designed for medium to robust cutting conditions Reduced tendency for built-up edge, improved wear resistance FAQ What materials is this insert intended for? The TS16-IR1.5ISO WMP22G insert is intended primarily for stainless steel (ISO M) applications and is optimised for the typical challenges of those materials. Does the insert feature a coating and what is its benefit? Yes; the insert uses the Tiger·tec Gold coating technology, which enhances wear resistance and helps maintain a sharp, stable cutting edge under elevated temperatures. What advantage does the IR1.5ISO chipbreaker provide? The IR1.5ISO chipbreaker promotes controlled chip formation and evacuation when machining tough, ductile stainless steels, reducing the risk of long, entangling chips. Is the WMP22G grade suitable for interrupted cuts? WMP22G is designed for medium to robust conditions and provides a balance of toughness and wear resistance that is suitable for many interrupted cutting scenarios encountered in stainless-steel turning. How does this insert affect tool-change frequency? By combining the WMP22G grade with Tiger·tec Gold coating and the IR1.5ISO chipbreaker, the insert offers improved life and edge stability, typically leading to fewer indexings and reduced tool-change frequency. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; no affiliation with our company is implied. The offered item is an original, factory-new product from the manufacturer (Walter Tools).
TS16-IR1.5ISO WMP32G WMP32G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the WMP32G grade ensures secure chip formation and extended edge life when machining stainless steel, making the insert a cost-effective choice for robust production. Order the TS16-IR1.5ISO WMP32G directly via Metav Werkzeuge or request technical advice from our consultants. TS16-IR1.5ISO WMP32G – Indexable turning insert for stainless steel (Walter Tools) The TS16-IR1.5ISO WMP32G is a coated carbide indexable turning insert designed for stable cutting performance and reliable chip control in stainless applications. Tiger·tec Gold coated for high process reliability WMP32G grade for stainless steel machining IR1.5ISO chipbreaker for consistent chip control Designed for productive, repeatable turning operations Consistent performance through advanced coating technology The combination of the Tiger·tec Gold coating and a coated carbide substrate provides a balanced resistance to heat and adhesion, which is essential when working with stainless steel. The multilayer coating reduces friction at the cutting edge and helps prevent built‑up edge formation; this translates into longer tool life and more consistent surface finish in serial production. For operations where thermal load and material toughness are critical, the grade selection WMP32G supports secure chip formation and a reliable cutting edge, reducing the need for frequent index changes and lowering overall machining costs. Predictable chip control and edge stability for smoother cycles The insert’s IR1.5ISO chipbreaker is engineered for controlled chip fragmentation under medium to heavy cutting conditions common with stainless alloys. Stable chip control reduces the risk of tangling and mitigates workpiece damage, while the insert’s edge design supports repeatable dimensional results and a steady cycle time. When fitted into standard indexable toolholders, this geometry provides machinists with straightforward setup and predictable behaviour across batches, which improves process reliability and reduces unplanned downtime. Practical shop-floor benefits and material suitability Specifically developed for the ISO material group M, this insert excels in applications that demand secure cutting of stainless steel where toughness and heat generation can otherwise degrade results. The WMP32G grade, combined with Tiger·tec Gold surface treatment, offers good wear resistance and a stable cutting edge under varying feed and speed regimes. Where surface integrity and repeatability matter, the insert delivers clear economic advantages by extending intervals between tool changes and supporting higher productivity. The Walter Tools development focus on process stability and edge life complements workshop requirements for consistent, high‑quality turning. Request cutting data and delivery options from Metav Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: TS16-IR1.5ISO-WMP32G-WALTER Product type: Indexable turning insert Grade: WMP32G Series: Tiger·tec Gold Facts Chipbreaker: IR1.5ISO Material group: M (stainless steel) Suitability: stainless steel confirmed Special features Coating technology: Tiger·tec Gold Substrate: coated carbide Manufacturer brand: Walter Tools ISO designation: TS16-IR1.5ISO WMP32G FAQ What materials is this insert suited for? The TS16-IR1.5ISO WMP32G is specified for ISO material group M and is suitable for machining stainless steel. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WMP32G grade reduces friction and adhesion at the cutting edge, which enhances wear resistance and stabilises edge life during stainless steel turning. Which chipbreaker is integrated and what is its benefit? The insert features the IR1.5ISO chipbreaker, which provides controlled chip fragmentation and reduces the risk of chip entanglement in medium to robust cuts. Is this insert compatible with standard indexable toolholders? Yes, the TS16-IR1.5ISO WMP32G is designed for use in common indexable turning toolholders; the chipbreaker and grade support predictable machining behaviour. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, brand‑new product of Walter Tools.
TS16-IR1.5ISO-2 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of a combination of Tiger·tec Gold coating and the WMP32G grade for stable cutting performance and extended tool life when machining stainless steel; order the insert directly via Metav Werkzeuge or consult our advisors for cutting data and application support. TS16-IR1.5ISO-2 WMP32G — Indexable turning insert, Tiger·tec Gold (for stainless steel) | Walter Tools The TS16-IR1.5ISO-2 WMP32G is an indexable turning insert engineered for reliable machining of stainless steel in medium to robust conditions, combining a coated cemented-carbide grade with a purpose-built IR1.5ISO-2 chipbreaker. Tiger·tec Gold coating for extended tool life Optimised for stainless steel (ISO M) Stable chip control with IR1.5ISO-2 geometry Faster throughput thanks to durable coating and grade The combination of Tiger·tec Gold technology and the WMP32G grade delivers a coated cemented-carbide construction that resists edge wear and supports longer tool life. This results in fewer interruptions for insert changes and a more consistent production rhythm. By prioritising wear resistance and edge stability, the insert helps reduce unplanned downtime and contributes to measurable productivity improvements in turning operations where heat and material toughness are a challenge. Predictable chip formation for stainless-steel applications Stainless steels are prone to work-hardening and built-up edge; the IR1.5ISO-2 chipbreaker geometry is designed to promote controlled chip formation and evacuation under those conditions. Improved chip control reduces the risk of surface damage and tooling interference, so component rework and machine stoppages are less likely. For operations that demand repeatable results on ISO M materials, the geometry supports a safer machining window without sacrificing cycle time. Improved process security and surface quality A coated cemented-carbide grade that combines toughness with coating adhesion creates a stable cutting edge, which in turn improves process security and the achievable surface finish. The stable edge behaviour of this insert means fewer variations between insert changes and a reduced need for corrective finishing passes. For production environments where consistent part quality is essential, the insert contributes directly to lower scrap rates and improved first-pass yield. Seamless integration into standard indexable tooling systems The insert is a purpose-made indexable turning solution compatible with common tool holders and tool-change routines. Its design facilitates fast indexing and predictable performance across multiple seats, enabling efficient tool management and cost-effective use of cutting edges. For shops seeking a pragmatic upgrade for stainless-steel turning, this insert offers a straightforward route to better repeatability and reduced tooling costs per component. Contact Metav Werkzeuge to discuss recommended cutting data, holder compatibility and to arrange supply of the Tiger·tec Gold WMP32G inserts for immediate integration into production. Technical Data SKU: TS16-IR1.5ISO-2-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-IR1.5ISO-2 WMP32G Walter Tools Product type: Indexable turning insert Core data Grade/Sort: WMP32G Series: Tiger-tec Gold Chipbreaker: IR1.5ISO-2 Material classification: M (stainless steel) Construction: Coated cemented carbide Special features Suitable for stainless steel (ISO M) Stable edge behaviour for medium to robust conditions Optimised chip formation for reduced built-up edge FAQ Which materials is this insert intended for? The TS16-IR1.5ISO-2 WMP32G insert is specified for stainless steel (ISO M) and provides stable cutting behaviour in medium to robust machining conditions. What does the WMP32G designation indicate? WMP32G denotes the Walter Tools grade within the Tiger·tec Gold family; it is a coated cemented-carbide grade selected for a balance of toughness and wear resistance suited to stainless-steel turning. How does the IR1.5ISO-2 chipbreaker improve machining? The IR1.5ISO-2 geometry promotes consistent chip control and evacuation, reducing the risk of built-up edge and supporting improved surface quality during challenging stainless-steel cuts. Is this insert compatible with standard tool holders? The insert is designed as a standard indexable turning solution and integrates with commonly used holders that accept the TS16 form factor, enabling straightforward indexing and replacement. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-IR1.5ISO-F5 WMP32G WMP32G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the WMP32G carbide grade ensures a stable cutting edge and improved chip control when machining rostfreier Stahl; benefit from consistent performance and reduced rework by sourcing the insert through Metav Werkzeuge or contacting our advisors for tailored cutting data. TS16-IR1.5ISO-F5 WMP32G indexable turning insert — Tiger·tec Gold coating, for rostfreier Stahl (Walter Tools) The TS16-IR1.5ISO-F5 WMP32G is an indexable turning insert engineered for reliable performance when machining rostfreier Stahl under medium to robust cutting conditions. Tiger·tec Gold coating for longer tool life Optimised chip control for rostfreier Stahl Coated carbide grade WMP32G for stability IR1.5ISO-F5 chipbreaker for consistent swarf Increased process stability for rostfreier Stahl machining The combination of the WMP32G carbide grade and the Tiger·tec Gold coating delivers measurable improvements in tool life and edge stability when working with rostfreier Stahl, materials that commonly cause built-up edge and high thermal loads. The insert’s geometry and coating technology are designed to support secure chip formation and reduce the tendency for material to adhere to the cutting edge; this means fewer interruptions for edge dressing and more continuous production runs. The result is a reliable cutting process that helps maintain surface quality and dimensional consistency. Predictable chip control that reduces rework The IR1.5ISO-F5 chipbreaker is optimised to produce short, controllable chips with rostfreier Stahl alloys, lowering the risk of entanglement and workpiece damage. Controlled chip flow contributes directly to safer machining conditions and reduces downstream manual handling and cleanup. For workshop planners and production engineers, improved chip behaviour translates into lower scrap rates and more predictable cycle times, thereby increasing overall throughput and efficiency on turning operations. Durable cutting edge through advanced coating technology The insert benefits from an advanced coating system that enhances wear resistance and thermal stability during interrupted or heavy cuts. The applied Tiger·tec Gold coating supports a consistent, robust cutting edge under fluctuating temperatures typical for rostfreier Stahl machining. This coating, combined with a coated carbide substrate, decreases flank and crater wear, extending the service interval and reducing the frequency of index changes. Maintenance intervals are therefore more predictable, supporting leaner tool inventory strategies. Practical application and machining guidance This indexable insert is suited to medium to heavy duty turning of rostfreie materials where secure chip formation and edge life are priorities. The insert’s specification is particularly relevant for shops aiming to balance productivity with surface finish requirements. For integration into existing tool holders and holders systems, consult Metav Werkzeuge for compatible clamping and recommended cutting parameters; recommended feeds and speeds depend on workpiece alloy and machine capability, and the right cutting data helps exploit the insert’s endurance while safeguarding component tolerances. Contact Metav Werkzeuge for availability, cutting data and tailored recommendations for Walter Tools Tiger·tec Gold inserts; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TS16-IR1.5ISO-F5-WMP32G-WALTER Designation: TS16-IR1.5ISO-F5 WMP32G Product type: Indexable turning insert (Drehwendeschneidplatte) Manufacturer/brand: Walter Tools Carbide grade: WMP32G Coating technology: Tiger·tec Gold Facts Material group: M (rostfreie Stähle) Suitable for rostfreier Stahl: yes Chipbreaker type: IR1.5ISO-F5 Series: Tiger·tec Gold Special features Coated carbide construction Optimised chip control geometry Designed for medium to robust cutting conditions Stable cutting edge for rostfreie materials FAQ What materials is this insert designed for? The TS16-IR1.5ISO-F5 WMP32G insert is designed for machining rostfreier Stahl (material group M) under medium to robust conditions. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WMP32G grade increases thermal stability and wear resistance, helping to maintain a stable cutting edge and extend tool life during machining of rostfreie alloys. Which chipbreaker does the insert use and why is it beneficial? The IR1.5ISO-F5 chipbreaker promotes short, controlled chips with rostfreier Stahl, improving process safety and reducing the need for manual chip handling and rework. Can this insert be used for light finishing operations? While optimised for medium to robust cuts, the insert can be applied in finishing with adjusted feeds and speeds; consult Metav Werkzeuge for recommended cutting parameters to achieve required surface quality. Is the WMP32G grade suitable for interrupted cuts? Yes, the coated carbide construction and the Tiger·tec Gold coating provide the robustness required for intermittent and demanding turning operations in rostfreie materials. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the named manufacturers. The offered article is original, new production from the manufacturer.
TS16-IR1.5ISO-M5 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WMP32G grade and the IR1.5ISO chipbreaker for reliable chip control and extended tool life in stainless steel turning. Order the TS16-IR1.5ISO-M5 WMP32G directly via Metav Werkzeuge or ask the consultants for application advice. Indexable turning insert TS16-IR1.5ISO-M5 WMP32G – Tiger‑tec Gold (Walter Tools) The TS16-IR1.5ISO-M5 WMP32G is an indexable turning insert optimised for secure chip formation and consistent performance in stainless steel machining. Tiger‑tec Gold coating for extended tool life WMP32G grade for stainless steel machining IR1.5ISO chipbreaker for secure chip control Stable cutting edge and good wear resistance Maximise productivity with dependable chip control The combination of Tiger‑tec Gold surface engineering and the WMP32G grade delivers stable cutting performance under the thermal and mechanical stresses typical of stainless steel. The IR1.5ISO chipbreaker is designed to promote predictable chip splitting and evacuation, reducing the risk of built‑up edge and interrupted cuts. For manufacturers seeking higher throughput, this insert supports shorter cycle times by maintaining a constant cutting geometry and lowering the frequency of edge changes. The result is improved machine utilisation and fewer process interruptions. Consistent component quality for stainless steel applications When working with stainless steel, workpiece integrity and surface finish are decisive. The coated carbide composition provides a stable cutting edge and resistance to adhesive wear, which helps to preserve dimensional accuracy over multiple indexings. This behaviour translates into repeatable surface quality and less rework. The insert’s geometry balances shear and flank contact to reduce heat concentration and support a controlled metal‑removal process, so finishing passes remain consistent without excessive manual correction. Simple integration and predictable tool lifecycle Adopting this indexable insert within standard turning toolholders is straightforward, and the Walter Tools development focus on reliable edge retention lowers overall tooling consumption. The insert’s characteristics enable predictable wear progression, which simplifies tooling logistics and inventory planning. For production engineers, the benefit is an easier decision matrix when specifying inserts for stainless steel: fewer unknowns, consistent tool life and transparent regrind or replacement intervals. The TS16‑IR1.5ISO‑M5 WMP32G therefore supports leaner processes and clearer cost‑per‑part calculations. Contact Metav Werkzeuge for tailored application advice and to procure the Walter Tools TS16-IR1.5ISO-M5 WMP32G insert for stainless steel machining Technical Data SKU: TS16-IR1.5ISO-M5-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-IR1.5ISO-M5 WMP32G Walter Tools Product type: Indexable turning insert Series: Tiger-tec Gold Facts Grade: WMP32G Geometry: TS16-IR1.5ISO-M5 Material designation: M Suitable for stainless steel: yes UID: TS16-IR1.5ISO-M5-WMP32G-WALTER Special features Coating technology: Tiger·tec Gold Coated carbide grade Designed for secure chip control Stable cutting edge and wear resistance FAQ What materials is this insert suitable for? The TS16-IR1.5ISO-M5 WMP32G is designed primarily for stainless steel and performs well under the typical clamping and thermal conditions of these alloys. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on the WMP32G grade improves wear resistance and edge life, which helps to maintain consistent cutting conditions and reduces insert change frequency. Is the IR1.5ISO chipbreaker suitable for long turning cycles? Yes, the IR1.5ISO chipbreaker promotes reliable chip control over extended cycles, supporting uninterrupted machining and reducing the incidence of built‑up edge. Can this insert be used in standard turning toolholders? The insert’s geometry and designation are compatible with common indexable turning toolholders specified for TS16‑type geometries. What is the expected benefit for component surface quality? Using the WMP32G grade with the IR1.5ISO chipbreaker yields a more stable cutting edge and consistent material removal, which contributes to improved and repeatable surface finishes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original factory‑new merchandise from Walter Tools.
TS16-IR1.75ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of high process stability and Tiger‑tec Gold coating for reliable machining of stainless steel; the grade combines WMP32G performance with an IR1.75ISO chipbreaker for stable chip control and extended tool life. Order directly via Metav Werkzeuge or consult our technical team for advice and application-specific recommendations. TS16-IR1.75ISO WMP32G indexable turning insert — Walter Tools for machining stainless steel TS16-IR1.75ISO WMP32G is an indexable turning insert designed for robust machining of stainless steels under medium to demanding conditions Tiger‑tec Gold coated carbide grade WMP32G Optimised for stainless steel (ISO M) machining IR1.75ISO chipbreaker for controlled chips Designed for stable cutting edges and long life Reliable performance for stainless steel turning The insert of the Tiger‑tec Gold series delivers consistent chip control and improved process reliability when machining stainless steel. Its coated carbide chemistry, identified by the WMP32G grade, is formulated to resist the stickiness and heat associated with austenitic and other stainless alloys. This means fewer interruptions from built-up edge formation and more predictable tool life, which supports continuous production and reduces unscheduled tool changes. The IR1.75ISO chipbreaker promotes short, manageable chips, translating into safer swarf handling and less secondary finishing. Efficiency gains through stable cutting and reduced rework By combining a coated carbide substrate with a proven chipbreaker geometry, the insert helps to maintain a stable cutting edge over longer cycles. Stable edges lower the frequency of regrinding or tool index changes, enabling higher uptime on turning centres and lathes. For operations seeking to improve throughput without sacrificing surface quality, this indexable solution enables more consistent dimensional results and can contribute to lower overall machining costs over time. The technical design focuses on delivering tangible process benefits rather than speculative claims. Practical advantages in everyday production The plate’s geometry and grade selection make it suitable for a range of general turning tasks in production environments that prioritise repeatability. The insert supports moderate to tough cutting conditions typical for stainless applications and is compatible with standard toolholders that accept the TS16 designation. Operators benefit from more predictable tool behaviour and easier process setup due to the insert’s engineered chip control and robust coating, simplifying tool selection and reducing process trial‑and‑error. For tailored recommendations on integrating Walter Tools Tiger‑tec Gold inserts into your workflow, contact Metav Werkzeuge today for application advice and supply options Technical data SKU: TS16-IR1.75ISO-WMP32G-WALTER Product designation: TS16-IR1.75ISO WMP32G Manufacturer: Walter Tools Facts Grade: WMP32G Series: Tiger‑tec Gold Material group: M (stainless steels) Special features Chipbreaker: IR1.75ISO Product type: indexable turning insert Application: machining of stainless steel Coating: Tiger‑tec Gold (coated carbide) FAQ What materials is this insert intended for? The TS16-IR1.75ISO WMP32G insert by Walter Tools is intended primarily for stainless steel applications (ISO group M), offering improved chip control and reduced build-up during turning. How does the IR1.75ISO chipbreaker affect machining? The IR1.75ISO chipbreaker on the Walter Tools insert produces short, controlled chips that simplify swarf management and help maintain consistent surface finish during uninterrupted turning cycles. Is this insert suitable for heavy roughing operations? The WMP32G grade and Tiger‑tec Gold coating provide good robustness for medium to robust conditions in stainless turning; however, specific cutting parameters should be matched to the operation and machine capability. Can the insert improve surface finish on turned parts? Using the TS16-IR1.75ISO WMP32G with appropriate speeds and feeds reduces built‑up edge and vibration, which contributes to a more consistent surface finish on stainless components. Which toolholders are compatible with the TS16-IR1.75ISO WMP32G? The insert fits holders designed for the TS16 insert designation; confirm seat and clamping geometry with the Walter Tools toolholder specifications before assembly. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory‑new goods of the manufacturer.
TS16-IR10ACME WMP32G Wendeplatten - Walter Tools
TS16-IR10ACME WMP32G – Drehwendeschneidplatte von Walter Tools Die TS16-IR10ACME WMP32G ist eine Drehwendeschneidplatte für die produktive Zerspanung von rostfreien Stählen unter mittleren bis robusten Einsatzbedingungen Tiger·tec Gold: langlebige Beschichtung Optimierter Spanbrecher IR10ACME für stabile Spanbildung Speziell ausgelegt für rostfreie Stähle Konstante Schneidkante für hohe Prozesssicherheit Hohe Wirtschaftlichkeit durch beschichteten Hartmetall-Schneidstoff Die TS16-IR10ACME WMP32G kombiniert einen beschichteten Hartmetall-Schneidstoff mit der Tiger·tec Gold Technologie und bietet dadurch eine ausgewogene Balance aus Standzeit und Bearbeitungsleistung. Die Beschichtung reduziert Verschleiß bei erhöhten Temperaturen und sorgt für gleichbleibende Schneidkanten, sodass Rüstzeiten seltener anfallen und die Maschinenlaufzeiten wirtschaftlich nutzbar sind. Für Fertigungen, in denen Wiederholgenauigkeit und lange Werkzeugstandzeiten den Durchsatz bestimmen, bietet diese Wendeschneidplatte einen klaren Produktivitätsvorteil Stabilität der Spanbildung und Spanformer für rostfreie Stähle Der integrierte Spanbrecher IR10ACME ist gezielt auf die Herausforderungen bei rostfreien Stählen ausgelegt: Zähigkeit, Neigung zu Aufbauschneiden und hohe Wärmeentwicklung. Durch die Kombination aus Geometrie und Schneidstoff entstehen kurze, kontrollierte Späne, die den Spanfluss in automatisierten Zerspanungsprozessen verbessern und Stillstandzeiten durch Spanverklebung reduzieren. Diese Eigenschaft führt direkt zu höherer Maschinenauslastung und geringeren Nachbearbeitungszeiten Einsatzfelder, Zielgruppe und Praxisnutzen Die Wendeschneidplatte richtet sich an Zerspanungsbetriebe und Serienfertiger in der Maschinenbau-, Lebensmittel- und Medizintechnikbranche, die häufig rostfreie Stähle verarbeiten. Anwender profitieren von der einfachen Einsetzbarkeit in konventionellen sowie in CNC-Drehprozessen und von der Kompatibilität mit gängigen Halterprogrammen. Durch die robuste Beschichtung eignet sich die Platte besonders für Bauteile mit mittleren bis erhöhten Wärmebelastungen, bei denen konstanter Spanabfall und zuverlässige Oberflächengüte gefordert sind Prozesssicherheit, Oberflächengüte und Herstellerkompetenz Walter Tools liefert mit der TS16-IR10ACME WMP32G eine Lösung, die auf hohe Prozesssicherheit und stabile Schneidkanten abzielt. Die Kombination aus bewährter Serie und optimierter Spanform sorgt für konstante Ergebnisse und reproduzierbare Oberflächenqualitäten. In Fertigungsumgebungen, in denen Ausschussquoten und Nacharbeit Kosten treibt, trägt diese Wendeschneidplatte zur Minimierung von Stillständen und zur Verbesserung der Liefertermintreue bei Empfehlung: Für verlässliche Serienbearbeitung von rostfreien Stählen die TS16-IR10ACME WMP32G von Walter Tools wählen und technische Beratung oder Bestellinformationen bei Metav Werkzeuge GmbH per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 anfragen Produktmerkmale Artikelnummer: TS16-IR10ACME-WMP32G-WALTER Marke: Walter Tools Produkt: Drehwendeschneidplatte Serie: Tiger·tec Gold Bezeichnung: TS16-IR10ACME WMP32G Sorte: WMP32G Spanbrecher: IR10ACME Werkstoffgruppe: M (rostfreie Stähle) Fakten Besonderheiten Beschichtung: Tiger·tec Gold Schneidstoffklasse: beschichtetes Hartmetall Bearbeitbar: rostfreie Stähle (M: rostfreie Stähle – zäh, neigt zu Aufbauschneiden) Spanformer: IR10ACME Hersteller: Walter Tools Sortenbeschreibung: gute Standzeit, stabile Spanbildung FAQ Was ist der typische Einsatzbereich der TS16-IR10ACME WMP32G? Die TS16-IR10ACME WMP32G von Walter Tools ist primär für die Zerspanung von rostfreien Stählen konzipiert und eignet sich für Serienfertigung sowie CNC-Drehprozesse mit mittleren bis robusten Einsatzbedingungen Welche Vorteile bietet die Tiger·tec Gold Beschichtung? Die Tiger·tec Gold Beschichtung der WMP32G sorgt für erhöhte Verschleißfestigkeit und Temperaturstabilität, wodurch die Wendeschneidplatte länger scharfe Schneidkanten behält und die Standzeit im Vergleich zu unbeschichteten Varianten steigt Wie verbessert der Spanbrecher IR10ACME den Fertigungsprozess? Der IR10ACME Spanbrecher formt kontrollierte, kurze Späne bei der Bearbeitung von rostfreien Stählen, reduziert Spanverklebung und erleichtert automatischen Spantransport, was die Maschinenverfügbarkeit verbessert Ist die Wendeschneidplatte für Hochleistungsdrehmaschinen geeignet? Ja, die TS16-IR10ACME WMP32G ist für produktive Zerspanung ausgelegt und bietet durch Beschichtung und Geometrie eine gute Balance aus Standzeit und Prozesssicherheit auf Hochleistungsdrehmaschinen Welche Informationen sollten für die Auswahl zusätzlich beachtet werden? Für die optimale Werkzeugauswahl sind Werkstoffspezifikation, Schnitthöhe, Zustellwerte und Haltertyp relevant; bei Bedarf liefert Metav Werkzeuge GmbH technische Beratung zur TS16-IR10ACME WMP32G Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-IR10UN WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP22G cutting grade and the IR10UN chipbreaker for reliable chip control and consistent edge life; order the TS16-IR10UN WMP22G directly via Metav Werkzeuge or ask our consultants if needed. TS16-IR10UN WMP22G – indexable turning insert, Tiger·tec Gold, for stainless steel (Walter Tools) The TS16-IR10UN WMP22G is an indexable turning insert engineered for machining stainless steel, offering robust chip control and a coating optimised for demanding operating conditions. Tiger·tec Gold coating for extended tool life Optimised IR10UN chipbreaker for stable chips Designed for stainless steel machining Reliable edge stability in medium to robust conditions Increased productivity through stable cutting performance The coated carbide grade delivers consistently predictable machining results in materials that tend to work-harden and produce long, stringy chips. By combining the Tiger·tec Gold coating with a purpose-designed geometry, the insert promotes stable chip formation and reduced tendency to build up on the cutting edge. This leads to fewer interruptions for tool changes and a steadier production flow. The result is measurable efficiency: less downtime, fewer rework operations and improved throughput on stainless steel components. Secure chip control and clearer process windows The IR10UN chipbreaker is developed to fragment chips reliably when turning stainless steel grades. A chipbreaker modifies the chip flow and cutting forces; in this case the geometry helps break chips into manageable segments and lowers heat concentration at the edge. The WMP22G grade is a coated carbide variant tuned for the specific demands of rostfreie Stähle, offering a balance between edge robustness and toughness for medium to robust cutting conditions. For shop floors new to these materials, the term “coated carbide” denotes a hard substrate with a protective layer that increases wear resistance and thermal stability compared with uncoated grades. Shop-floor benefits: reliability, repeatability and integration Using an insert with optimised coating and chip control reduces process variability and supports consistent surface finish and dimensional accuracy. The combination of grade and geometry is especially useful where repeatable results are required across batches; the insert sustains a stable cutting edge during extended runs, which contributes to reliable tool life and lower tool consumption overall. Where integration into existing toolholders is needed, the insert’s ISO designation and chipbreaker type enable straightforward selection of compatible clamping systems. For additional machining data or cutting parameters, the technical team at Metav Werkzeuge can provide tailored recommendations to match feed, speed and depth of cut to the material and machine capability. Contact Metav Werkzeuge for tailored cutting data, delivery options and technical advice for Walter Tools turning inserts — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data SKU: TS16-IR10UN-WMP22G-WALTER Type: Indexable turning insert ISO designation: TS16-IR10UN WMP22G Grade: WMP22G Series: Tiger·tec Gold Chipbreaker: IR10UN Suitable for: stainless steel Core data No measurable numerical characteristics provided in the dataset Special features Coated carbide cutting grade (Tiger·tec Gold) Chipbreaker type IR10UN for controlled chip fragmentation Intended application: rostfreie Stähle (stainless steel) Medium to robust cutting conditions Manufacturer brand: Walter Tools FAQ What materials is this insert suited for? The TS16-IR10UN WMP22G insert is designed primarily for machining rostfreie Stähle (stainless steel) and performs reliably under medium to robust cutting conditions. What does the IR10UN chipbreaker achieve? The IR10UN chipbreaker promotes controlled chip fragmentation and reduced edge build-up, which improves process stability and surface finish when turning stainless steel. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating increases wear resistance and thermal stability of the carbide substrate, resulting in longer tool life and more consistent cutting performance. Is this insert compatible with standard indexable holders? The ISO designation TS16-IR10UN WMP22G allows selection of compatible indexable toolholders; ensure the holder matches the insert form and clamping system. Where to get cutting parameters for a specific stainless grade? Cutting data can be provided by Metav Werkzeuge; the supplier can recommend speeds, feeds and depths of cut based on the machine and stainless steel grade. Walter Tools / Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original factory-new goods of the manufacturer.
TS16-IR10UN WMP32G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold coating and the WMP32G grade for secure chip formation and extended tool life when machining stainless steel; order the TS16-IR10UN WMP32G turning indexable insert directly via Metav Werkzeuge or consult our specialists for application advice. TS16-IR10UN WMP32G turning indexable insert – Tiger·tec Gold coating, for stainless steel (Walter Tools) A TS16-IR10UN WMP32G turning indexable insert designed for dependable performance in the machining of stainless steels under moderate to robust conditions Tiger·tec Gold coating for enhanced tool life IR10UN chipbreaker for reliable chip control Coated carbide grade optimised for stainless steel Consistent performance and longer productive runtime The TS16-IR10UN WMP32G is built around the WMP32G coated carbide grade and the Tiger·tec Gold technology, which together support long tool life and repeatable results in demanding stainless steel operations. The combination of a wear-resistant coating and a grade tuned for ISO M materials reduces the frequency of index changes and contributes to stable machining cycles. For production environments where downtime impacts throughput, this insert offers measurable gains in process stability and component consistency. Secure chip control and surface integrity for stainless machining An optimised IR10UN chipbreaker promotes stable chip formation and effective evacuation even when cutting heat-prone, adhesive stainless steels. The geometry reduces the tendency for built-up edge and supports a cleaner cutting action, which in turn helps maintain a consistent surface finish and reduces rework. The coated carbide construction further stabilises the cutting edge at elevated temperatures, so the insert sustains performance across longer cuts and variable feed conditions. Application guidance and practical benefits at the machine This turning insert is intended for turning tasks on stainless steel (ISO M) where medium to robust cutting conditions are encountered. The design favours process security and predictable wear behaviour, making it suitable for batch production and repeat manufacturing operations. As a turning indexable insert, it integrates into standard toolholders that accept the TS16‑form inserts and supports straightforward indexation when corner wear appears. The result is a productive tool solution that balances edge stability with economical index use. Contact Metav Werkzeuge for tailored application recommendations and to source Walter Tools TS16-IR10UN WMP32G inserts with Tiger·tec Gold technology Technical data SKU: TS16-IR10UN-WMP32G-WALTER Product: Turning indexable insert TS16-IR10UN WMP32G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Grade: WMP32G Material group: M (stainless steel) Chipbreaker: IR10UN Special features Coating: Tiger·tec Gold (coated carbide) Optimised for stainless steels (ISO M) Designed for stable chip formation and robust cutting conditions FAQ What materials is this insert suitable for? The TS16-IR10UN WMP32G insert is formulated for machining stainless steels (ISO M), offering secure chip control and wear resistance in these materials. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold on the WMP32G grade enhances surface hardness and temperature resistance, helping the TS16-IR10UN WMP32G maintain a stable cutting edge and extend index life during prolonged operations. What advantage does the IR10UN chipbreaker offer? The IR10UN chipbreaker promotes predictable chip formation and evacuation, reducing built-up edge and improving surface quality when turning tough, adhesive stainless steels with this insert. Is this insert suitable for high-feed finishing or roughing? The combination of the WMP32G grade and IR10UN chipbreaker is aimed at medium to robust cutting conditions; selection for finishing or heavy roughing should consider cutting parameters and machine stability. How is the insert indexed when wear occurs? Wear is managed through standard indexation of the TS16 insert form; rotating to a fresh corner restores cutting geometry and continues production with minimal interruption. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names mentioned are the property of their respective owners. Brand names are used for clarification and description only; there is no connection implied between our company and the named brands. The offered item is an original, factory-new product from the manufacturer.
TS16-IR10W WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of a combination of Tiger‑tec Gold durability, precise IR10W chip control and suitability for stainless steel to reduce downtime and improve component quality; order the insert directly via Metav Werkzeuge or contact our technical advisors for application guidance. TS16-IR10W WMP32G indexable turning insert — Tiger‑tec Gold, for stainless steel (Walter Tools) TS16-IR10W WMP32G is a precision indexable turning insert engineered for reliable machining of stainless steel under medium to robust conditions Tiger‑tec Gold coating for long tool life Optimised for stainless steel (M) IR10W chipbreaker for secure chip control Stable cutting edge under heavy loads Consistent performance when machining stainless steel The WMP32G grade, featured in this indexable insert, is developed specifically for machining stainless steel where toughness and heat generation are significant challenges. The engineered substrate and Tiger‑tec Gold coating provide wear resistance and help to maintain a sharp cutting edge over longer series runs. For production environments this means fewer tool changes and more consistent surface quality, while secure chip control reduces interruptions caused by poor chip formation. What the Tiger‑tec Gold coating delivers for productivity The Tiger‑tec Gold coating combines adhesion resistance and thermal stability to reduce flank wear and crater wear during turning operations. Coating performance is essential when cutting materials that tend to work-harden, because it helps to preserve the cutting geometry and extends intercoolant intervals. In practice, this results in maintained dimensional accuracy over tool life and contributes to measurable improvements in productivity on component batches. Secure chip formation with the IR10W chipbreaker The integrated IR10W chipbreaker is tailored to the cutting mechanics of stainless steel, promoting small, controllable chips instead of long, stringy swarf. Controlled chips protect the workpiece and tooling, speed up cycle times and simplify swarf handling at the machine. The chipbreaker design also supports consistent engagement of the cutting edge, which improves process stability and reduces the risk of edge build-up that can spoil finishes. Integration into standard tool systems and production workflows As an indexable turning insert, the item is designed for easy indexing and predictable repeatability; worn corners are rotated to present a fresh edge without full regrinding. The grade’s balance of substrate and coating makes it suitable for mixed production where stainless steels are common, providing stable machining across different geometries. Where repeatable quality and reduced setup frequency matter, this insert supports smoother shop-floor logistics and predictable maintenance planning. For application-specific advice or to secure supply of this Tiger‑tec Gold grade insert, contact Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com — our specialists will advise on tooling clamping and cutting data for optimal results Technical data Article number: TS16-IR10W-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-IR10W WMP32G Walter Tools Manufacturer: Walter Tools Facts Grade: WMP32G Chipbreaker: IR10W Series: Tiger‑tec Gold Material group: M Special features Indexable turning insert design Coated carbide grade Suitable for stainless steel (M) Stable cutting edge and chip control FAQ What materials is this insert suitable for? The TS16-IR10W WMP32G insert is specified for stainless steel (material group M) and is optimised for medium to robust cutting conditions. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold coating on the WMP32G grade reduces wear and improves thermal resistance, helping to preserve the cutting edge and extend tool life during turning operations. What benefit does the IR10W chipbreaker provide? The IR10W chipbreaker promotes controlled chip formation on stainless steel, improving swarf handling, surface finish and overall process stability. Can the insert be indexed in standard holders? Yes, the indexable turning insert is compatible with common toolholder systems; the design allows quick indexing to present a fresh cutting edge without full tool replacement. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only; there is no affiliation between our company and the mentioned brands. The offered article is an original, brand-new product from the manufacturer.
TS16-IR11.5NPT WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger‑tec Gold coating, a WMP32G grade optimised for stainless steel, and the IR11.5NPT chipbreaker for reliable chip control; order the insert directly via Metav Werkzeuge or consult our advisers for application support. TS16-IR11.5NPT WMP32G — indexable turning insert, Tiger‑tec Gold, for stainless steel (Walter Tools) TS16-IR11.5NPT WMP32G is an indexable turning insert engineered for stable machining of stainless steels in medium to robust cutting conditions Tiger‑tec Gold coating for high wear resistance WMP32G grade optimised for stainless steel IR11.5NPT chipbreaker for secure chip control Indexable turning insert TS16 form for versatile use Predictable process stability for stainless steels The insert’s Tiger‑tec Gold coating on a coated carbide substrate delivers a combination of improved surface hardness and thermal resistance that supports wear resistance during demanding operations with stainless alloys. This micro‑engineered surface reduces the tendency for built‑up edge formation and improves edge life, which leads to more predictable cycle times and fewer tool changes. For production environments where consistent output matters, this cutting geometry promotes steady machining performance and reduced scrap rates. Consistent chip control and surface finish The grade WMP32G and the IR11.5NPT chipbreaker are matched to encourage safe chip formation when machining stainless steel. The chipbreaker’s geometry directs chips away from the cutting zone, lowering the risk of re‑cutting and thermal load on the edge. As a result, operators can expect improved surface finish and reduced manual rework. The combination of grade and chipbreaker is particularly effective under mixed feed and depth conditions, translating to higher process reliability and more efficient spindle utilisation. Easy selection and practical integration into workflows As an indexable turning insert in TS16 form, the part integrates into standard toolholders and is suitable for a broad range of turning applications. The coated carbide construction and the Tiger‑tec Gold technology support medium to robust cutting strategies, simplifying tooling choices for components in the M ISO group. For application data or material‑specific recommendations, technical advisers are available; typical guidance covers feed rates, cutting speeds and toolholder choices to achieve the intended productivity gains. Contact Metav Werkzeuge for tailored application advice and ordering of Walter Tools turning inserts featuring Tiger‑tec Gold; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: TS16-IR11.5NPT-WMP32G-WALTER Designation: TS16-IR11.5NPT WMP32G Product type: indexable turning insert Series: Tiger‑tec Gold Grade: WMP32G Chipbreaker: IR11.5NPT Manufacturer: Walter Tools Facts ISO material group: M (stainless steel) Coating: Tiger‑tec Gold (coated carbide) Material: coated carbide Suitable for: stainless steel Special features Optimised for stable chip formation Designed to reduce built‑up edge risk Suited for medium to robust cutting conditions Compatible with standard TS16 toolholders FAQ What materials is this insert designed for? The TS16-IR11.5NPT WMP32G insert is designed primarily for stainless steel applications (ISO group M), where its coated carbide grade supports safe chip formation and reduced edge wear. How does the IR11.5NPT chipbreaker improve machining? The IR11.5NPT chipbreaker directs chips away from the cutting zone to prevent re‑cutting and to reduce heat concentration at the cutting edge, which improves surface finish and process stability when using the WMP32G grade. Is this insert compatible with standard toolholders? Yes; the TS16 form is a conventional indexable geometry and fits toolholders designed for TS16 inserts, enabling straightforward integration into existing turning setups. What benefit does the Tiger‑tec Gold series provide? The Tiger‑tec Gold technology combines a tailored coating with a hardened substrate to enhance wear resistance and thermal management, leading to longer tool life and more consistent machining results with stainless steels. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world's leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names belong to their respective owners. Mark names and registered trademarks are used solely for explanation and identification of products. The listed article is an original, brand‑new product from the manufacturer.
TS16-IR11.5NPT-F5 WMP32G Wendeplatten - Walter Tools
Optimise machining reliability with the combination of Tiger·tec Gold coating and the WMP32G grade: secure chip formation, a stable cutting edge and predictable tool life ensure efficient turning of rostfreier Stahl. Order the insert directly via Metav Werkzeuge or consult our specialists for process integration. TS16-IR11.5NPT-F5 WMP32G – indexable turning insert for rostfreier Stahl by Walter Tools A compact, engineered TS16-IR11.5NPT-F5 WMP32G indexable turning insert designed for medium to demanding turning tasks, offering controlled chip flow and reliable edge stability for rostfreier Stahl machining. Tiger·tec Gold coating for long tool life WMP32G grade for rostfreier Stahl stability IR11.5NPT-F5 chipbreaker for secure chip control Precision geometry for consistent surface finish Higher process reliability for rostfreier Stahl turning The insert’s Tiger·tec Gold technology and the WMP32G grade are engineered to address the typical challenges of machining rostfreier Stahl: toughness, built-up edge tendency and elevated cutting temperatures. The combination of a coated carbide substrate and a tailored microstructure promotes stable chip formation and a durable cutting edge, which reduces unplanned tool changes and supports a steady production rhythm. For toolrooms and production lines aiming to increase uptime, the result is measurable: fewer interruptions and more reproducible cycles per insert, especially in medium to robust cutting conditions. Consistent surface quality and controlled chips The integrated IR11.5NPT-F5 chipbreaker is matched to the insert geometry to produce compact, manageable chips and to prevent stringing that can compromise part finish. A stable cutting edge geometry supports consistent surface integrity, reducing the need for subsequent finishing passes. Explained plainly: the insert’s geometry plus chipformer deliver reliable chip evacuation and predictable tool wear, which in turn helps maintain tolerance bands on turned components while lowering rework rates. This makes the insert an effective choice where repeatable quality and process safety are required. Practical integration and application advantages As an indexable turning insert, the TS16-IR11.5NPT-F5 WMP32G fits standard turning toolholders for comparable insert formats and is suitable for a range of turning operations on rostfreier Stahl. The coated carbide composition supports heat resistance and wear protection under elevated cutting temperatures typical of these alloys. For production planners and machining engineers, the benefit is clear: a versatile insert that supports both roughing and semi-finishing tasks within its recommended application window, helping to streamline tooling choices and spare part management. For tailored advice on clamping, speeds and feeds, Metav Werkzeuge is available to provide application-specific recommendations. Contact Metav Werkzeuge for tailored machining recommendations and to secure Walter Tools Tiger·tec Gold turning inserts for rostfreier Stahl applications Technical data SKU: TS16-IR11.5NPT-F5-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-IR11.5NPT-F5 WMP32G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WMP32G Chipbreaker: IR11.5NPT-F5 Material group: M Application: rostfreier Stahl Type: Drehwendeschneidplatte UID: TS16-IR11.5NPT-F5-WMP32G-WALTER Facts Material group designation: M rostfreier_stahl_material_anwendung: true Special features Coating technology: Tiger·tec Gold Substrate: coated carbide Optimised chipformer: IR11.5NPT-F5 Target application: turning of rostfreier Stahl Stable chip formation and cutting-edge behaviour FAQ Which materials is this insert suitable for? The TS16-IR11.5NPT-F5 WMP32G is designed primarily for rostfreier Stahl (material group M) and performs best under medium to robust machining conditions typical for these alloys. How does the IR11.5NPT-F5 chipbreaker affect machining? The IR11.5NPT-F5 chipbreaker promotes compact chip formation and controlled evacuation, improving surface finish and reducing the risk of chip entanglement during turning with this Walter Tools insert. What advantages does the Tiger·tec Gold series provide? Tiger·tec Gold coating enhances wear resistance and thermal stability of the insert, contributing to longer tool life and consistent cutting performance on rostfreier Stahl. Is the insert suitable for finishing operations? The geometry and grade of the TS16-IR11.5NPT-F5 WMP32G support semi-finishing and finishing within appropriate cutting parameter windows; for high-precision finishing, application-specific settings are advised. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for clarification purposes. There is no affiliation between our company and the named brands. The offered item is original, brand-new merchandise from the manufacturer.
TS16-IR11.5NPTF WMP32G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold technology and the WMP32G grade for reliable chip control and extended cutting-edge life; the combination of coated carbide performance and application focus on rostfreier Stahl ensures consistent throughput and fewer tool changes — order directly via Metav Werkzeuge or consult our experts for tailored recommendations. TS16-IR11.5NPTF TS16-IR11.5NPTF WMP32G — Indexable turning insert WMP32G for rostfreier Stahl (Walter Tools) A high-performance indexable turning insert, TS16-IR11.5NPTF WMP32G, designed for medium to robust turning operations on rostfreier Stahl with a Tiger·tec Gold coating for improved tool life and process security Tiger·tec Gold coated carbide Optimised for rostfreier Stahl machining Stable chip control under robust conditions Reliable cutting-edge longevity Improved productivity through predictable cutting behaviour The Tiger·tec Gold WMP32G grade combines a multilayer coating with a wear-resistant substrate to deliver stable chip formation and consistent cutting-edge integrity in demanding turning operations. For rostfreier Stahl, materials tend to be tough and generate heat; the grade’s surface engineering reduces built-up edge and supports continuous metal removal, which translates into fewer interruptions and longer uninterrupted cycles. The chipbreaker IR11.5NPTF is tuned to promote manageable chips in medium to robust cuts, reducing manual chip handling and the risk of rework. Application clarity and material compatibility This indexable insert is specifically matched to the machining behaviour of rostfreier Stahl and is suitable where a reliable compromise between wear resistance and toughness is required. The coated carbide construction enables higher cutting parameters compared with uncoated grades while maintaining edge stability, making it meaningful for operations that demand both dimensional consistency and surface integrity. In plain terms, the geometry and grade help to avoid built-up edge and support repeatable component quality in serial production. Process reliability and cost-effectiveness By combining a proven Tiger·tec Gold coating with an optimised chipbreaker, the insert reduces unplanned tool changes and minimises scrap, supporting a lower overall cost per component. The stable cutting edge provided by this solution enhances tool life and improves process security, particularly under tougher engagement conditions. For factories aiming to balance throughput with surface finish requirements, this insert provides a pragmatic route to higher effective machine utilisation and fewer secondary operations. Practical guidance for production planning When integrating this type of insert into an existing tool plan, consider modest increases to cutting speed alongside conservative feed rates during the first runs to verify thermal response and chip evacuation in specific rostfreier Stahl variants. The combination of Tiger·tec Gold coating and the IR11.5NPTF chipbreaker supports straightforward parameter optimisation; documented trial data or consultant input can shorten ramp-up times. If additional technical details are required for tool holders or clamping interfaces, the Metav Werkzeuge team can assist with specification matching and cutting trials. Discuss the Tiger·tec Gold WMP32G grade with Metav Werkzeuge for application-specific setup and optimise rostfreier Stahl turning — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice Technical data Article number: TS16-IR11.5NPTF-WMP32G-WALTER Product designation: TS16-IR11.5NPTF WMP32G Product type: Indexable turning insert Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IR11.5NPTF Material group: M Facts No numeric dimensions provided No tolerance class provided Special features Coating: Tiger·tec Gold Substrate: coated carbide Application focus: rostfreier Stahl Sort description: coated carbide grade for medium to robust conditions Benefit: improved chip control and extended cutting-edge life FAQ Which materials is this insert intended for? The TS16-IR11.5NPTF WMP32G insert is primarily intended for machining rostfreier Stahl and is tuned to handle the toughness and thermal behaviour of those alloys. What advantages does the Tiger·tec Gold technology provide? Tiger·tec Gold offers a multilayer surface treatment that increases wear resistance and thermal stability, helping the WMP32G grade maintain a reliable cutting edge under continuous turning loads. Which chipbreaker is used and what is its effect? The IR11.5NPTF chipbreaker promotes controlled chip formation in medium to robust cuts, facilitating safe chip evacuation and reducing the likelihood of built-up edge in rostfreier Stahl turning. How does this insert contribute to process reliability? By combining a wear-resistant coating with a tuned chipbreaker geometry, the insert reduces unexpected tool changes and supports consistent surface quality, delivering measurable gains in machine uptime. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
TS16-IR11BSPT WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Gold coating and the WMP32G grade for reliable machining of stainless steels; the optimised IR11BSPT chipformer secures consistent chip flow and stable cutting edges. Order Walter Tools inserts via Metav Werkzeuge or contact our technical advisors for application support. TS16-IR11BSPT WMP32G indexable turning insert — Tiger‑tec Gold grade for stainless steels (Walter Tools) A TS16-IR11BSPT WMP32G indexable turning insert engineered for secure, repeatable performance in machining stainless steels under medium to robust conditions. Tiger‑tec Gold coating for wear resistance Optimised chipformer IR11BSPT for stable chips WMP32G grade tailored to stainless steels Consistent cutting-edge stability Increased tool life and thermal resistance for long runs The combination of the Tiger‑tec Gold coating with the WMP32G grade provides improved wear resistance and thermal stability when machining austenitic and other stainless steels (ISO group M). The coated carbide substrate reduces flank wear and helps maintain a consistent cutting edge under elevated temperatures, which translates into fewer tool changes and less interruption to production. This enhanced durability supports longer uninterrupted cycles and more predictable tool-change scheduling. Reliable chip control reduces rework and downtime The dedicated IR11BSPT chipformer is designed to generate controlled, segmented chips in demanding stainless‑steel conditions. By promoting consistent chip formation, the insert minimises the risk of built‑up edge and reduces the need for manual chip clearing. The result is improved process stability and less scrap, making the component particularly useful in batch production or longer turning sequences where chip behaviour directly influences productivity. Robust performance for medium to heavy turning tasks Built for medium to robust cutting conditions, this indexable insert supports a range of finishing and semi‑finishing operations on stainless steels. Its geometry and coating combination favour a secure edge under variable feeds and depths of cut, helping to achieve consistent surface quality without frequent edge reconditioning. Where operators require dependable repeatability across multiple workpieces, this grade contributes to steady cycle times and reproducible results. Ease of integration and economical process design As an indexable turning solution, the insert fits conventional toolholders and simplifies stock management compared to brazed or solid tools. The modular concept enables rapid replacement, restoring cutting performance within seconds and reducing machine downtime. Combined with the grade’s longevity and controlled chip behaviour, the insert supports a cost‑effective machining strategy and predictable production planning. Contact Metav Werkzeuge for application advice and to secure Walter Tools Tiger‑tec Gold inserts for your stainless‑steel turning tasks. Technical data Article number: TS16-IR11BSPT-WMP32G-WALTER Product name: TS16-IR11BSPT WMP32G Product type: Indexable turning insert Manufacturer: Walter Tools SKU / UID: TS16-IR11BSPT-WMP32G-WALTER Core data No dimensional data provided No cutting parameters provided Special features Series: Tiger‑tec Gold Grade: WMP32G (coated carbide) Chipformer: IR11BSPT Material application: stainless steels (ISO group M) Intended use: medium to robust stainless‑steel turning FAQ What materials is this insert suitable for? The TS16-IR11BSPT WMP32G insert from Walter Tools is designed primarily for stainless steels (ISO group M), offering stable chip control and edge life in these materials. What does the IR11BSPT chipformer do? The IR11BSPT chipformer on this insert promotes segmented, controllable chips during turning of stainless steels, improving process stability and reducing the risk of built‑up edge. Is the grade coated and why does that matter? Yes; the WMP32G grade employs the Tiger‑tec Gold coating technology, which enhances thermal resistance and wear protection, extending tool life in demanding stainless‑steel applications. Can this insert be used for finishing and semi‑finishing? The insert is suitable for finishing and semi‑finishing operations under medium to robust conditions, delivering consistent surface quality when matched with appropriate cutting data. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation or endorsement by our company. The offered article is an original, factory‑new product of the manufacturer.
TS16-IR11UN WMP32G Wendeplatten - Walter Tools
Combine the Tiger·tec Gold WMP32G coating with the IR11UN chipbreaker to achieve secure chip formation and extended edge life when machining stainless steel; benefit from consistent performance and reduced downtime. Order the TS16-IR11UN WMP32G insert directly via Metav Werkzeuge or consult the specialists for process matching. TS16-IR11UN WMP32G Walter Tools — Indexable turning insert, Tiger·tec Gold for stainless steel A TS16-IR11UN WMP32G indexable insert engineered for stable, medium-to-heavy machining of stainless steel under demanding conditions Tiger·tec Gold coated grade WMP32G Optimised for stainless steel machining IR11UN chipbreaker for stable chip control High wear resistance and edge stability Reliable performance for stainless steel turning The coated grade WMP32G from Walter Tools combines a modern coating technology with a wear-resistant substrate to tackle the challenges of machining stainless steel. The chemistry and layer structure of Tiger·tec Gold reduce edge build-up and thermal loading, which in turn stabilises cutting forces and extends tool life. This behaviour translates into fewer insert changes and predictable cycle times for serial production. The insert design supports secure chip formation even when materials exhibit toughness and high heat generation. Stable chip control and process security Equipped with the IR11UN chipbreaker, this insert promotes controlled chip fragmentation and evacuation at varied cutting depths and feeds. Stable chips reduce surface rework and protect the cutting edge from irregular loading, improving surface finish and dimensional consistency. The combination of chip geometry and coated cemented carbide substrate makes the insert suitable for interrupted cuts and harder operating windows, increasing productive machining time and lowering unit costs through reduced downtime. Practical advantages and tool selection guidance When selecting an insert for stainless steel, the focus should be on edge security and repeatability. The WMP32G grade was developed for these requirements, offering a balanced compromise between toughness and hardness for medium to robust applications. For workshops aiming to move from trial to stable series production, this insert provides the necessary process security and reproducible results. For bespoke recommendations on toolholder compatibility or cutting data, Metav Werkzeuge can assist with practical machining parameters and availability. Contact Metav Werkzeuge today for tailored advice and rapid availability on Walter Tools Tiger·tec Gold inserts; call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss application specifics Technical data SKU: TS16-IR11UN-WMP32G-WALTER Article: Drehwendeschneidplatte TS16-IR11UN WMP32G Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR11UN ISO designation: TS16-IR11UN WMP32G Facts Material group: M (stainless steel) Coating type: Tiger·tec Gold (coated cemented carbide) Typical application: Turning of stainless steel Suitability: Medium to robust cutting conditions Special features Coating technology: Tiger·tec Gold Substrate: Coated cemented carbide Chip control: IR11UN geometry Benefit: Enhanced edge stability and wear resistance Brand: Walter Tools FAQ What materials is this insert intended for? The TS16-IR11UN WMP32G insert is designed primarily for machining stainless steel, addressing toughness and high heat generation typical of these alloys. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WMP32G grade reduces adhesion and thermal wear, resulting in more stable cutting edges and longer tool life for stainless applications. What is the advantage of the IR11UN chipbreaker? The IR11UN chipbreaker promotes consistent chip formation and evacuation, which improves surface finish and reduces the risk of edge damage during turning. Can this insert be used for interrupted cuts? Yes, the coated substrate and chipbreaker combination of this insert supports interrupted and varied cutting conditions, offering reliable performance in less stable operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; there is no connection between our company and the named brands. The offered item is original and factory-new.
TS16-IR11W WMP22G Wendeplatten - Walter Tools
Reliable indexable turning insert combining Tiger‑tec Gold performance and the IR11W chipformer for secure chip control and extended tool life — order or consult Metav Werkzeuge for application support. TS16-IR11W WMP22G — Turning insert, Tiger‑tec Gold for rostfreier Stahl (Walter Tools) The TS16-IR11W WMP22G is a coated carbide turning insert optimised for machining rostfreier Stahl under medium to robust cutting conditions. Tiger‑tec Gold coating for improved wear resistance Optimised IR11W chipformer for stable chip control Suitable for rostfreier Stahl in medium to robust use Improved machining stability through optimised chip control The insert’s IR11W chipformer is engineered to maintain a controlled chip flow when cutting rostfreier Stahl, a material class prone to built-up edge and high heat generation. Stable chip formation reduces unexpected interruptions and supports consistent surface quality in serial production. By promoting predictable chip shapes and reducing tangling, the chipformer helps to protect the cutting edge and the machine spindle, increasing process reliability for batch and single‑piece production alike. This results in fewer tool changes and lower process variability on the shop floor. Longer tool life and consistent cut quality from Tiger‑tec Gold The WMP22G grade, part of the Tiger‑tec Gold series, pairs a robust coated carbide substrate with a specialised coating technology that improves resistance to abrasion and adhesion during turning of rostfreier Stahl. The combination supports a stable cutting edge under thermally demanding conditions, leading to fewer premature failures and a longer effective tool life. For manufacturers seeking reproducible results, the grade’s balanced wear behaviour contributes to predictable reconditioning cycles and simplified tooling logistics. Versatile application and straightforward integration into turning operations Designed as an indexable turning insert, the TS16‑IR11W WMP22G fits standard toolholders for internal and external turning operations where rostfreier Stahl is encountered. The insert’s geometry and coating make it suitable for medium to robust cutting regimes common in component production, pump and valve manufacturing, and medical or food industry parts made from rostfreier Stahl. Technical teams will appreciate the grade’s focus on secure chip control and edge robustness, which eases parameter selection and shortens setup time. For specific machine‑tool pairings or process windows, refer to Metav Werkzeuge for tailored recommendations. For application advice or to arrange supply of Walter Tools TS16-IR11W WMP22G turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert technical support and local availability Technical data Article number: TS16-IR11W-WMP22G-WALTER Product label: Drehwendeschneidplatte TS16-IR11W WMP22G Walter Tools Product type: Turning insert Facts Grade: WMP22G Series: Tiger‑tec Gold Material group: M (rostfreie Stähle) Special features Chipformer: IR11W Coating technology: Tiger‑tec Gold Coated carbide insert Suitable for rostfreier Stahl FAQ What materials is the TS16-IR11W WMP22G intended for? The TS16-IR11W WMP22G turning insert from Walter Tools is intended primarily for rostfreier Stahl (material group M), offering secure chip control and wear resistance for medium to robust cutting conditions. How does the IR11W chipformer benefit production? The IR11W chipformer on the WMP22G grade produces predictable chips and reduces built‑up edge, which helps maintain surface finish and minimise interruptions during continuous machining. Can the WMP22G grade be used on automated lathes? Yes; the WMP22G coated carbide grade is suitable for automated turning operations where reliable edge stability and repeatable tool life are required, particularly when machining rostfreier Stahl. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-IR11W WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold wear resistance and an IR11W chipbreaker that ensures stable chip formation when machining stainless steel. The result is longer tool life and consistent surface quality for productive turning operations. Order this insert via Metav Werkzeuge or consult our technical advisors for application support. TS16-IR11W WMP32G indexable turning insert — Tiger‑tec Gold, for stainless steel (Walter Tools) TS16-IR11W WMP32G is a coated indexable turning insert engineered for secure chip control and reliable performance in stainless‑steel turning applications. Tiger‑tec Gold coating for extended tool life Optimised IR11W chipbreaker for stable chip control Suitable for stainless steel (ISO M) machining Consistent cutting edge for productive turning Reliable results on stainless steel through proven coating technology The TS16‑IR11W WMP32G indexable insert uses the Tiger‑tec Gold coating technology to deliver improved wear resistance and thermal stability under the demanding conditions typical for stainless steel machining. The coated carbide grade supports a stable cutting edge, which reduces the risk of built‑up edge and helps maintain consistent surface finish across workpieces. For manufacturers seeking predictable tool life and reduced rework, the combination of a robust substrate and a modern coating translates into fewer tool changes and a steadier production flow. Controlled chip formation to keep production running An optimised IR11W chipformer supports reliable chip control, particularly important when turning materials that tend to produce long or stringy chips. Stable chip formation lowers the chance of chip entanglement, shortens machine downtime for cleaning and contributes to safer, continuous operation. From a rational perspective, improved chip evacuation increases usable cutting time and reduces secondary operations, yielding measurable productivity gains in medium to robust cutting conditions. Practical design that simplifies tool handling and stock management The geometry and grade selection of this indexable insert are geared towards straightforward tool management: consistent cutting edges reduce variability, while the standard TS16‑IR11W shape fits common tool holders for turning. The coated carbide construction ensures repeatable performance each time an edge is indexed. For workshop managers, this means easier inventory control and predictable replacement intervals, supporting leaner processes on the shop floor. Application guidance and machining considerations for best performance Classified for the ISO M group, this insert is optimised for stainless steel where toughness and heat generation are factors to manage. Using appropriate coolant or through‑tool lubrication and selecting conservative cutting speeds during initial trials helps avoid excessive temperatures and build‑up. The IR11W chipbreaker excels under medium to robust feeds; if finishing is required, reduce depth and feed to improve surface quality while preserving tool life. For specific parameter windows, refer to tool holder compatibility charts or consult technical literature. For dependable stainless‑steel turning with Tiger‑tec Gold, contact Metav Werkzeuge for tailored recommendations and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS16-IR11W-WMP32G-WALTER Product name: TS16-IR11W WMP32G Label: Drehwendeschneidplatte TS16-IR11W WMP32G Walter Tools Manufacturer: Walter Tools Product type: indexable turning insert Series: Tiger‑tec Gold Grade: WMP32G Chipbreaker: IR11W Material group: M (stainless steel) UID: TS16-IR11W-WMP32G-WALTER Facts Suitable for stainless steel: yes Coating technology: Tiger‑tec Gold Substrate: coated carbide ISO material group: M Special features Coated carbide grade optimised for stainless steel IR11W chipbreaker for stable chip control Designed for medium to robust cutting conditions Consistent cutting edge for predictable tool life Part of the Tiger‑tec Gold family FAQ Is this insert suitable for machining stainless steel? Yes. The TS16‑IR11W WMP32G insert is specified for ISO group M and is optimised for stainless‑steel machining with the Tiger‑tec Gold grade. What benefit does the IR11W chipbreaker provide? The IR11W chipbreaker promotes controlled chip formation and reduces the tendency for built‑up edge, improving process reliability when using the TS16‑IR11W WMP32G from Walter Tools. Can this insert be used for both roughing and semi‑finishing operations? The insert is suitable for medium to robust cutting conditions; for finishing applications, reduce depth of cut and feed to achieve the desired surface quality while maintaining tool life. What is the substrate and coating of the grade? The WMP32G is a coated carbide grade within the Tiger‑tec Gold family, combining a wear‑resistant coating with a robust substrate for improved performance on stainless steel. How often should the insert be indexed to maintain consistent results? Indexing intervals depend on component requirements and cutting parameters; the consistent cutting edge of this grade allows predictable indexing schedules based on observed wear and surface finish targets. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not indicate any affiliation. The offered article is an original, factory‑new product of Walter Tools.
TS16-IR11W-2 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WMP32G grade to achieve consistent chip control and longer edge life in stainless steel turning — a reliable combination for productive machining. Order directly via Metav Werkzeuge or consult our team for application-specific advice. TS16-IR11W-2 WMP32G — Indexable turning insert for stainless steels (Walter Tools) TS16-IR11W-2 WMP32G is an indexable turning insert designed for medium to robust machining of stainless steels, combining a Tiger·tec Gold coating with a chipbreaker optimised for safe chip formation Tiger·tec Gold coating for improved wear resistance Optimised for stainless steels (ISO group M) Stable chip formation under robust conditions Greater process reliability through advanced coating The Tiger·tec Gold series delivers a coated carbide solution that improves resistance to abrasive and adhesive wear, thereby extending tool life and reducing unplanned tool changes. The WMP32G grade is engineered for the demands of machining austenitic and other stainless steels, which tend to work‑harden and generate heat; the coating lowers friction and helps maintain a stable cutting edge, so cycle times remain consistent and surface quality is reproducible. Coated carbide refers to a cemented carbide substrate with one or more thin hard layers applied to enhance performance in demanding conditions. Safer machining and controlled chips for stainless steels Stainless steels pose challenges such as high ductility and a tendency to form long, stringy chips. The insert’s IR11W-2 chipbreaker geometry is shaped to split and curl chips reliably, reducing the risk of entanglement and re-cutting. This improves productivity by minimising interruptions and helps achieve a steady surface finish. As the grade is classified for ISO group M, it supports applications where predictable chip flow and robust edge stability are priorities, particularly in production environments that require repeatable results without frequent tool adjustments. Practical benefits for workshop productivity Integration of this insert into turning toolholders supports fast indexability and consistent machining behaviour, which translates into measurable efficiency gains on batch and continuous operations. The combination of Tiger·tec Gold technology and the WMP32G alloy provides broad applicability across many stainless steel tasks, offering a balance between wear resistance and toughness. For operations seeking fewer tool changes and more uptime, the insert contributes to stable process windows and reduced scrap rates, making it a practical choice for modern metalworking shops. Contact Metav Werkzeuge to discuss application suitability or to secure Walter Tools TS16-IR11W-2 WMP32G inserts for stainless steel machining projects Technical data Article number: TS16-IR11W-2-WMP32G-WALTER Designation: TS16-IR11W-2 WMP32G Product type: Indexable turning insert Manufacturer: Walter Tools Facts ISO material group: M (stainless steels) Grade: WMP32G Series: Tiger·tec Gold Special features Chipbreaker: IR11W-2 Coated carbide tool grade Suitable for medium to robust machining conditions Optimised for stable chip formation and edge control FAQ What materials is this insert suitable for? The TS16-IR11W-2 WMP32G insert is intended for stainless steels (ISO group M) and is optimised for operations that require secure chip control and resistance to work‑hardening. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating reduces cutting friction and increases wear resistance on the WMP32G grade, which helps to maintain a stable cutting edge and extend tool life under demanding stainless steel applications. What is the function of the IR11W-2 chipbreaker? The IR11W-2 geometry is designed to produce short, controllable chips in turning, lowering the risk of chip entanglement and improving surface finish consistency during medium to robust machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes and to clarify compatibility and application; there is no connection between our company and the mentioned brands. The offered article is an original, factory‑new product of Walter Tools.
TS16-IR11W-F5 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating and the WMP32G grade for dependable machining of rostfreier Stahl, delivering improved tool life and stable chip formation; order directly via Metav Werkzeuge or consult our specialists for process integration. TS16-IR11W-F5 WMP32G indexable turning insert for rostfreier Stahl – Walter Tools TS16-IR11W-F5 WMP32G is a coated carbide indexable insert designed for turning operations in rostfreier Stahl under medium to robust cutting conditions Tiger·tec Gold coating for extended tool life Optimised chip control with IR11W-F5 chipbreaker Suitable for rostfreier Stahl applications Robust grade WMP32G for stable cutting edges Maximise productivity with a premium coating and grade The combination of Tiger·tec Gold and the WMP32G grade gives a measurable benefit in process stability for turning operations on rostfreier Stahl. The coated carbide substrate resists thermal softening and supports consistent cutting-edge behaviour, which reduces the frequency of tool changes and unplanned downtime. For production environments where consistency and uptime are critical, this insert delivers a durable cutting solution that helps to sustain cycle times and reduce component rework. Control chips and avoid built-up edge for cleaner cuts The IR11W-F5 chipbreaker is engineered to produce predictable chip shapes and to limit the risk of a built-up edge, common when machining tough alloys. Improved chip control reduces machining interruptions and contributes to a safer, more ergonomic workplace by avoiding long, stringy chips. As a result, tool life is extended and part surfaces remain more consistent, which lowers the need for secondary finishing and enhances overall process efficiency. Consistent surface quality and reliable process behaviour Using this insert supports surface quality goals through stable cutting conditions and repeatable edge performance. The grade’s formulation provides resistance to edge wear in the presence of high temperatures and adhesive tendencies found in rostfreier Stahl, contributing to process reliability and predictable part tolerances. Manufacturers focused on repeatable results will find the insert suited to both single-shift and continuous production schedules. Integrates into standard turning tool systems with minimal adaptation The insert is compatible with common indexable turning tool holders and can be deployed quickly in existing toolrooms. As an indexable insert from Walter Tools, TS16-IR11W-F5 WMP32G fits established workflows and supports a broad range of turning tasks in workshop and industrial settings. The result is a practical upgrade to cutting performance without the need for substantial changes to tooling systems. For precision turning of rostfreier Stahl choose the Walter Tools TS16-IR11W-F5 WMP32G with Tiger·tec Gold — contact Metav Werkzeuge for application advice and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS16-IR11W-F5-WMP32G-WALTER Product type: indexable turning insert Brand: Walter Tools Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IR11W-F5 Facts Material group: M (rostfreier Stahl) ISO designation: TS16-IR11W-F5 WMP32G SKU: TS16-IR11W-F5-WMP32G-WALTER Special features Coating: Tiger·tec Gold Grade description: WMP32G (coated carbide) Chip control: IR11W-F5 Suitable for: rostfreier Stahl Typical application: medium to robust cutting conditions Manufacturer: Walter Tools FAQ What materials is the TS16-IR11W-F5 WMP32G suited for? The TS16-IR11W-F5 WMP32G is specified for applications in rostfreier Stahl (material group M) and is engineered to manage the adhesion and heat characteristics typical of these alloys. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WMP32G grade enhances thermal resistance and reduces flank wear, so the TS16-IR11W-F5 WMP32G maintains a stable cutting edge for longer periods and supports consistent surface quality. What is the role of the IR11W-F5 chipbreaker? The IR11W-F5 chipbreaker shapes chips to avoid long, hazardous swarf and to reduce the formation of built-up edge, improving machining continuity when using the TS16-IR11W-F5 WMP32G. Can the insert be integrated into existing holders? Yes, as an indexable turning insert from Walter Tools, TS16-IR11W-F5 WMP32G is compatible with standard turning holders and can be introduced into current tooling systems without extensive modification. Is this insert suitable for continuous production? The combination of WMP32G and Tiger·tec Gold targets robust performance and process reliability, making the TS16-IR11W-F5 WMP32G a practical choice for continuous or serial production involving rostfreier Stahl. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and forms part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.
TS16-IR12ACME WMP32G WMP32G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold coating and the WMP32G grade ensures reliable chip control and extended tool life when machining rostfreier Stahl, delivering consistent productivity and reduced downtime. For fast procurement and application support, order the insert directly via Metav Werkzeuge or consult the technical advisors for process-specific recommendations. TS16-IR12ACME WMP32G indexable turning insert — Tiger‑tec Gold, IR12ACME chipbreaker (Walter Tools) The TS16-IR12ACME WMP32G is an indexable turning insert engineered for medium to robust machining of rostfreier Stahl, combining a high-performance coating with a dedicated chipbreaker for secure chip formation. Tiger‑tec Gold coating for extended tool life IR12ACME chipbreaker for controlled chips Optimised for rostfreier Stahl machining Consistent performance for demanding stainless applications The TS16-IR12ACME WMP32G insert delivers stable cutting conditions when working with rostfreier Stahl, a material group known for toughness and heat sensitivity. The combination of a coated‑carbide substrate and a purpose‑designed chipbreaker reduces the risk of built‑up edge and supports predictable chip flow. This results in fewer interruptions for chip clearing and more uniform surface finish, so cycle times remain steady even under medium to heavy cutting parameters. The benefit is a more reliable machining process with reduced scrap rates. Coating technology that prolongs productive runtime The Tiger‑tec Gold coating provides thermal and wear resistance that preserves the cutting geometry over longer runs. In practice, this means fewer insert changes and a lower cost per part under continuous production. The coating’s performance stabilises the cutting edge at elevated temperatures typical for rostfreier Stahl machining, improving edge retention and keeping tolerances consistent. Operators experience less variation in tool life between batches, which simplifies production planning and stock control. Chip control and process security for smoother operation The IR12ACME chipbreaker is tuned to promote short, manageable chips during turning, reducing the likelihood of entanglement and improving coolant access to the cutting zone. Better chip control contributes directly to machine uptime and operator safety while supporting higher feed rates where appropriate. For shops seeking reproducible results, the combination of chip geometry and substrate hardness helps maintain a robust cutting edge that tolerates intermittent conditions without premature failure. Integration into productive tool systems As a standard indexable insert, the design fits conventional turning toolholders and is suitable for automated changeover in modern turning centres. Its specification supports systematic tooling strategies where inserts are rotated or replaced at predetermined wear thresholds, enabling predictable maintenance intervals. The insert’s attributes favour stable chip formation and consistent dimensional control, which together support quality assurance processes and reduce rework. For tailored application advice on Walter Tools Tiger‑tec Gold inserts and to ensure the optimal insertion strategy for rostfreier Stahl components, contact Metav Werkzeuge for expert consultation and rapid availability. Technical data Article number: TS16-IR12ACME-WMP32G-WALTER Product name: Drehwendeschneidplatte TS16-IR12ACME WMP32G Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WMP32G Chipbreaker: IR12ACME ISO designation: TS16-IR12ACME WMP32G Facts No numerical parameters (diameter, rake, thickness) provided in the data Special features Coating: Tiger‑tec Gold (coated carbide) Material suitability: rostfreier Stahl Stable chip formation and improved cutting‑edge life Designed for medium to robust cutting conditions Optimised for predictable machining and process security FAQ What materials is this insert suitable for? The insert is specified for machining rostfreier Stahl, with the WMP32G grade optimised for the tougher, heat‑sensitive behaviour of these alloys. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on the insert increases thermal and wear resistance, extending tool life and enabling longer uninterrupted production runs. What is the role of the IR12ACME chipbreaker? The IR12ACME chipbreaker promotes controlled, short chips during turning, which improves process security and reduces interruptions for chip management. Can this insert be used in automated tool systems? Yes; the insert’s indexable design is compatible with standard turning toolholders and supports automated insert change strategies for predictable maintenance. The Walter AG (brand: Walter Tools) is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names are used for explanation only; there is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
TS16-IR12BUT WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating and the WMP32G grade that deliver consistent chip control and a durable cutting edge for rostfreier Stahl turning; order the TS16-IR12BUT WMP32G directly via Metav Werkzeuge or ask our consultants if guidance is required. TS16-IR12BUT WMP32G indexable turning insert — Tiger·tec Gold grade for rostfreier Stahl (Walter Tools) The TS16-IR12BUT WMP32G is an indexable turning insert engineered for reliable machining of rostfreier Stahl under medium to robust operating conditions, combining a coated carbide substrate with an optimised chipbreaker for stable performance. Tiger·tec Gold coated carbide technology Optimised for rostfreier Stahl machining Stable chip control in demanding conditions Consistent machining performance for rostfreier Stahl The combination of Tiger·tec Gold coating and the WMP32G cutting grade offers coated carbide performance tuned to the demands of rostfreier Stahl. The coating enhances heat resistance and reduces built-up edge formation, which are common challenges when turning austenitic and other stainless alloys. Improved chip formation ensures predictable metal removal and helps maintain surface finish without frequent intervention. For production environments where repeatability and process stability matter, this specification reduces scrap and supports consistent cycle times. Longer tool life and measurable productivity gains A wear-optimised substrate and the Tiger·tec Gold surface treatment contribute to wear resistance and a stable cutting edge, extending the interval between tool changes. This leads to fewer machine stops and lower handling time per component, improving overall productivity and cost-efficiency in series turning operations. The design supports both roughing and semi-finishing cuts in medium to robust cutting conditions, allowing process planners to balance cutting data for throughput without compromising component quality. Reliable chip control and process security The integrated chipbreaker IR12BUT is developed to manage chips effectively in tougher rostfreie Stahl applications, reducing the risk of entanglement and improving swarf evacuation. As an indexable insert, the geometry provides repeatable seating and straightforward index changes, which shortens set-up times and reduces operator variability. The designation M corresponds to rostfreie Stähle within ISO material group coding, emphasising suitability for stainless steel families that typically require specialised grades to avoid built-up edge and excessive heat generation. Practical application guidance and assistance The insert is intended for turning processes in production and job-shop environments where robustness and consistent surface quality are priorities. When selecting cutting data, prioritise stable clamping and appropriate coolant strategy to leverage the Tiger·tec Gold coating benefits fully. If additional technical data or tailored cutting parameters are required, Metav Werkzeuge provides application advice and can assist in optimising feeds and speeds for specific rostfreie Stahl alloys. For recommended cutting parameters or a consultation on integrating Walter Tools Tiger·tec Gold inserts into existing tooling systems, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for direct support and ordering assistance Technical data Article number: TS16-IR12BUT-WMP32G-WALTER SKU: TS16-IR12BUT-WMP32G-WALTER Product type: indexable turning insert Designation: TS16-IR12BUT WMP32G Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IR12BUT Material group: M Facts No numeric specifications provided Special features Coating: Tiger·tec Gold Material: coated carbide (beschichtetes Hartmetall) Suitable for: rostfreier Stahl Chip control: IR12BUT chipbreaker Manufacturer: Walter Tools FAQ What materials is this insert suited for? The TS16-IR12BUT WMP32G insert is optimised for rostfreie Stähle (ISO group M) and is designed to manage the toughness and heat sensitivity typical of these alloys. How does the Tiger·tec Gold coating help in stainless steel turning? The Tiger·tec Gold coating improves heat resistance and reduces built-up edge on the WMP32G grade, enabling more stable cutting and longer tool life when machining rostfreie Stähle. Can the insert be used for both roughing and finishing operations? Yes; the coated carbide substrate and the IR12BUT chipbreaker provide a balance suitable for roughing and semi-finishing in medium to robust applications, maintaining surface quality and tool life. What advantage does the IR12BUT chipbreaker offer? The IR12BUT geometry promotes predictable chip formation and reliable evacuation, reducing risks of chip entanglement and improving process security in rostfreie Stahl turning. Is technical support available for selecting cutting parameters? Application support and cutting-parameter recommendations are available through Metav Werkzeuge to help integrate the WMP32G grade into specific machining processes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The item offered is original, brand-new goods from the manufacturer.
TS16-IR12UN WMP22G Wendeplatten - Walter Tools
Achieve dependable machining of stainless steel by combining the Tiger‑tec Gold coating and the WMP22G grade with the IR12UN chipbreaker for stable cutting and reliable chip control — order the TS16-IR12UN WMP22G directly via Metav Werkzeuge or consult the specialists for application advice. TS16-IR12UN WMP22G indexable turning insert, Tiger‑tec Gold for stainless steel — Walter Tools A TS16-IR12UN WMP22G indexable insert designed for secure chip formation and stable cutting when machining stainless steels under medium to robust conditions Tiger‑tec Gold coating for improved tool life WMP22G grade optimised for stainless steel IR12UN chipbreaker for secure chip control Consistent performance when machining stainless steel The combination of the WMP22G grade and dedicated chip geometry delivers consistent cutting behaviour when working with stainless steel. Materials in group M are prone to toughness and work hardening; the selected grade supports secure chip formation and reduces the risk of built-up edge. This results in fewer interruptions during production and more predictable component quality, which is particularly important for batch and serial turning operations. Extended tool life through Tiger‑tec Gold coating The Tiger‑tec Gold surface treatment on the coated carbide substrate enhances wear resistance and edge stability under thermally demanding conditions. The coating assists in reducing flank wear and maintains cutting-edge integrity for longer tool life, supporting sustained productivity in continuous machining cycles. For manufacturers, this translates into longer indexable insert life and reduced tooling change frequency. Reliable chip control with the IR12UN chipbreaker The IR12UN chipbreaker design promotes controlled chip evacuation and minimises erratic chip forms that can compromise process reliability. Stable chip control improves surface finish and lowers the likelihood of component rework. In practical terms, this chip geometry helps to maintain cutting forces within a steady range, supporting reproducible turning performance and safer handling of swarf in the machine environment. Practical advantages for production environments As an indexable insert from Walter Tools, this component is suited to medium to robust machining scenarios where consistent results are required. The insert’s specification supports straightforward inventory management, as the grade and chipbreaker combination is applicable across a broad range of rostfrei (stainless) materials. Reliable edge behaviour and optimised chip control offer tangible efficiency gains during high-volume production runs. Discuss the suitability and availability of the Walter Tools TS16-IR12UN WMP22G with Metav Werkzeuge for optimised stainless steel turning; contact Metav Werkzeuge for technical advice and delivery details via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS16-IR12UN-WMP22G-WALTER Name: TS16-IR12UN WMP22G Product type: Drehwendeschneidplatte Brand: Walter Tools Series: Tiger‑tec Gold Material group: M Facts ISO material group: M (stainless steels) Chipbreaker type: IR12UN Special features Coating: Tiger‑tec Gold Grade: WMP22G (coated carbide) Suitable for: stainless steel (M) Controlled chip formation Stable cutting edge and extended tool life FAQ What materials is this insert suitable for? The TS16-IR12UN WMP22G insert is specified for machining stainless steels (ISO group M) and is engineered to support secure chip formation and edge stability on such materials. How does the Tiger‑tec Gold coating help in production? The Tiger‑tec Gold coating on the WMP22G grade improves wear resistance and edge retention, enabling longer tool life and more consistent turning performance with the Walter Tools indexable insert. What benefit does the IR12UN chipbreaker provide? The IR12UN chipbreaker promotes controlled chip evacuation and reduces the occurrence of deformed chips, contributing to improved surface finish and greater process stability when using the TS16-IR12UN WMP22G. Is this insert suitable for medium and heavy cutting conditions? Yes; the design and grade of the insert are targeted at medium to robust machining conditions, offering reliable performance in production environments. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is part of a well-established group of precision-tool manufacturers. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are cited for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
TS16-IR12UN WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating and the IR12UN chipbreaker for stable machining of stainless steel; the coated carbide grade ensures long tool life and secure chip control in medium to robust turning operations. Order the insert directly via Metav Werkzeuge or ask the consultants for application-specific advice. TS16-IR12UN WMP32G indexable turning insert – Tiger·tec Gold, coated carbide (for stainless steel) by Walter Tools The TS16-IR12UN WMP32G is an indexable turning insert optimised for safe chip formation and consistent cutting performance when machining stainless steels under medium to robust conditions. Tiger·tec Gold coated carbide grade WMP32G IR12UN chipbreaker for secure chip control Optimised for rostfreiem Stahl machining Stable cutting edge and improved tool life Higher productivity through targeted grade design The insert’s core advantage is the WMP32G grade, a coated carbide developed within the Tiger·tec Gold family to address the specific challenges of machining stainless steel. These alloys tend to be tough, generate high cutting temperatures and can form built-up edges; the coating and grade combination support a stable cutting edge and improved wear behaviour. As a result, cycle times can be reduced and tool-change intervals lengthened, which contributes directly to higher productivity on lathes and turning centres. Safer chip formation and surface quality gains With the IR12UN chipbreaker geometry, the insert promotes predictable chip control, reducing entanglement and interruptions. Controlled chip shapes improve process security and help maintain a consistent surface finish during interrupted cuts or turning with variable feeds. For operators and production planners, this means fewer stoppages for chip management and a lower risk of damage to the workpiece, translating into steadier output and reduced rework. Reliable tool life for robust turning conditions Designed for medium to robust cutting conditions, this indexable insert combines a wear-tolerant substrate and an advanced coating to deliver wear resistance and edge stability. The result is repeatable performance across batches and a reduced need for frequent insert replacements. For manufacturing contexts where reliability and repeatability are decisive, the grade offers a technical basis for stable process windows and predictable maintenance intervals. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and to arrange sample evaluations with detailed cutting data at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TS16-IR12UN-WMP32G-WALTER Designation: TS16-IR12UN WMP32G Manufacturer: Walter Tools Facts Material group: M (stainless steel) Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR12UN Special features Coated carbide Optimised chip formation Suitable for medium to robust cutting conditions Application: machining stainless steel FAQ What materials is this insert intended for? The TS16-IR12UN WMP32G insert is intended primarily for stainless steel (ISO group M) applications and performs reliably under medium to robust cutting conditions. How does the IR12UN chipbreaker help production? The IR12UN chipbreaker generates manageable chip shapes that lower the risk of chip entanglement, supporting continuous operation and improved surface quality with the Walter Tools indexable turning insert. Is the WMP32G grade suitable for interrupted cuts? Yes, the WMP32G coated carbide grade from the Tiger·tec Gold series offers edge stability that is advantageous in interrupted turning where secure chip control and resistance to built-up edge are required. Can the insert extend tool-change intervals? The combination of coated carbide and optimised chip control in this insert tends to increase wear resistance, which can reduce the frequency of insert changes and support longer uninterrupted production runs. Which cutting operations benefit most from this insert? Turning operations on lathes and turning centres that process rostfreien Stahl with medium to robust feeds benefit from the TS16-IR12UN WMP32G’s emphasis on chip control and edge stability. Manufacturer/Responsible: Walter AG; Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com