TS16-IR12UN-F5 WMP32G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the WMP32G grade for stable chip control and extended cutting-edge life when machining stainless steels; order the insert directly via Metav Werkzeuge or consult our technical team for application advice. TS16-IR12UN-F5 WMP32G — indexable turning insert (Tiger‑tec Gold) for stainless steel | Walter Tools The TS16-IR12UN-F5 WMP32G is a coated indexable turning insert engineered for machining stainless steels under medium to robust cutting conditions, offering reliable chip control and consistent edge stability for industrial turning operations. Tiger‑tec Gold coating for long tool life Grade WMP32G optimised for stainless steel Stable chip formation in demanding cuts Consistent cutting edge stability and productivity Improved chip formation and process reliability for stainless steels The Tiger‑tec Gold grade is tailored for the typical challenges of machining stainless steels, where toughness and heat generation can cause built-up edge and poor chip control. The WMP32G composition and the IR12UN-F5 chipbreaker cooperate to promote predictable chip formation, reducing the risk of stringing and machine interruptions. This results in fewer part rejects and a smoother production flow. The design supports stable cutting behaviour in both continuous and interrupted cuts, making it a dependable choice for shop-floor applications that demand repeatable results. Longer tool life and consistent cutting-edge performance A combination of advanced coating technology and a coated cemented carbide substrate delivers improved wear resistance and stable edge retention. The result is extended tool life and fewer insert changes, which lowers tool-related downtime and contributes to overall productivity gains. The insert’s coated carbide surface reduces abrasive wear and thermal softening during turning operations, helping maintain surface finish quality over longer tool cycles. These technical advantages translate into measurable efficiency improvements for component production in corrosive-resistant materials. Simple specification and integration into existing turning setups The ISO designation TS16-IR12UN-F5 WMP32G clarifies geometry and grade for fast specification and procurement. The chipbreaker marking IR12UN-F5 identifies the intended chip form and cutting conditions, enabling straightforward selection for compatible toolholders and clamping systems. As a standard indexable insert, it fits common turning configurations used in series production and maintenance operations, facilitating rapid replacement and minimal setup time. Technical staff benefit from the clear combination of grade, coating and chipbreaker data when planning process parameters. For machining stainless steels with Walter Tools' Tiger‑tec Gold grade, contact Metav Werkzeuge for tailored advice and procurement: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS16-IR12UN-F5-WMP32G-WALTER Designation: TS16-IR12UN-F5 WMP32G Manufacturer: Walter Tools Facts Grade: WMP32G Series: Tiger‑tec Gold Material group: ISO M (stainless steels) Special features Chipbreaker: IR12UN-F5 Coated carbide cutting material ISO designation TS16-IR12UN-F5 WMP32G FAQ What materials is this insert suitable for? The TS16-IR12UN-F5 WMP32G is designed primarily for stainless steels (ISO group M), delivering reliable performance in these tougher, heat-prone materials. What does the IR12UN-F5 chipbreaker achieve? The IR12UN-F5 chipbreaker is configured to promote controlled chip segmentation and evacuation when turning stainless steels, improving process stability and reducing the likelihood of built-up edge on the cutting face. Is the WMP32G grade suitable for robust cutting conditions? Yes, WMP32G is formulated for medium to robust machining tasks; the grade paired with the Tiger‑tec Gold coating helps maintain cutting-edge integrity under demanding conditions. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating enhances wear resistance and thermal stability of the insert, extending service life and helping to maintain consistent surface finishes during longer production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is original, brand-new goods from the manufacturer.
TS16-IR12W WMP32G WMP32G Wendeplatten - Walter Tools
The combination of WMP32G coated carbide and the IR12W chipbreaker delivers stable chip formation and extended tool life when machining stainless steel; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. TS16-IR12W WMP32G indexable turning insert – for stainless steel (Walter Tools) The TS16-IR12W WMP32G is an indexable turning insert engineered for medium to robust machining of stainless steel, offering a coated-carbide grade optimised for secure chip control and repeatable cutting performance. Tiger·tec Gold coating for extended tool life Optimised for stainless steel (ISO M) machining Stable chip formation under robust conditions Reliable repeatable performance (Walter Tools) Efficient machining in demanding stainless-steel applications The coated-carbide grade from the Tiger·tec Gold family is designed to address the typical challenges of stainless steel: high toughness, tendency to build up on the cutting edge and elevated cutting temperatures. By combining a wear-resistant coating with a geometry that encourages controlled chip breakage, the insert reduces the risk of edge build-up and heat-related tool deterioration. This results in fewer interruptions for regrinding and more consistent component quality, which is particularly relevant for production runs where process stability is essential. The emphasis is on measurable productivity gains rather than theoretical improvements. Predictable chip control and surface consistency The IR12W chipbreaker geometry provides predictable chip forms even under heavier cutting conditions. Predictable chips reduce downtime associated with chip evacuation and machine fouling; this yields better surface finishes and decreases the frequency of manual intervention. For operators and process engineers, the benefit is a simpler cutting strategy: fewer parameter adjustments are required to maintain an acceptable surface integrity. The design supports a wide range of cutting parameters typical for ISO M materials, enabling efficient transfer of cutting data into shop-floor practise. Process reliability and tool-life advantages for production environments Built as a coated indexable insert, the WMP32G grade is intended to deliver long tool life and consistent tool-edge behaviour over repeated cycles. The coating technology improves resistance to abrasion and thermal influence, which is especially valuable when dealing with stainless grades that generate heat. In practice, this means longer intervals between insert changes and a lower rate of unexpected scrap caused by deteriorating edge condition. The product is suitable where reliable, repeatable performance and high process security are prioritised for batch and continuous production. For high-process stability in stainless-steel turning, choose Walter Tools' Tiger·tec Gold inserts — contact Metav Werkzeuge for availability and application support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TS16-IR12W-WMP32G-WALTER Name: Drehwendeschneidplatte TS16-IR12W WMP32G Walter Tools Type: Drehwendeschneidplatte (indexable turning insert) Manufacturer: Walter Tools Facts Grade designation: WMP32G Applicable material group: M (stainless steel) Chipbreaker: IR12W Series: Tiger·tec Gold Special features Coating: Tiger·tec Gold (coated carbide technology) Material: coated carbide ISO designation: TS16-IR12W WMP32G Intended use: medium to robust stainless-steel machining Proven for stable chip formation and extended cutting performance FAQ What materials is this insert intended for? The TS16-IR12W WMP32G insert is intended for stainless steel (ISO group M) machining and performs well under medium to robust cutting conditions. How does the Tiger·tec Gold coating help in practice? The Tiger·tec Gold coating on the WMP32G grade improves wear resistance and thermal stability, which extends tool life and maintains cutting-edge integrity during stainless-steel turning. Which chipbreaker is fitted and what is its benefit? The insert features the IR12W chipbreaker, which promotes controlled chip formation, reducing machine interruptions and improving surface consistency. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is original, factory-new goods of the manufacturer.
TS16-IR13UN WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and an optimised IR13UN chipbreaker for reliable machining of rostfreier Stahl; the result is consistent edge stability and extended tool life. Order directly via Metav Werkzeuge or request application advice from our consultants for immediate integration into production. TS16-IR13UN WMP32G — Tiger·tec Gold turning indexable insert for rostfreier Stahl | Walter Tools The TS16-IR13UN WMP32G is a coated carbide indexable insert from the Tiger·tec Gold series, engineered for secure chip formation and repeatable performance when turning rostfreier Stahl under medium to robust conditions. Tiger·tec Gold coating for long tool life Optimised chip control IR13UN Designed for rostfreier Stahl (ISO group M) Stable cutting edge for consistent productivity Higher productivity through engineered coating and grade The combination of the Tiger·tec Gold technology and the WMP32G grade gives a measurable improvement in wear resistance and process stability. This coated carbide formulation is designed to withstand the adhesion and heat issues commonly encountered when machining rostfreier Stahl, reducing the frequency of index changes and unplanned stops. For production environments this translates into smoother cycle times and fewer interventions, supporting a predictable machining flow. Fewer quality issues thanks to optimised chip control The IR13UN chipbreaker is configured to produce short, controlled chips even when the material tends to form strings or build-up. Controlled chip formation reduces the risk of built-up edge and surface damage, which in turn preserves dimensional accuracy and surface finish. Explaining briefly: a chipbreaker shapes the chip at the cutting edge to prevent long, tangled chips and to promote stable cutting forces, which benefits both component quality and operator safety. Repeatable edge life and consistent results The insert’s grade and coating work together to deliver edge stability under moderate to heavy cuts. This means fewer variations between insert changes and a more consistent part-to-part finish. For manufacturers this repeatability supports tighter process windows and easier planning of tool change intervals. The specification focuses on predictable performance rather than experimental gains, which is why the solution is suitable where process reliability is prioritised. Clear suitability and simple application guidance Classified for ISO group M, the insert is expressly intended for machining rostfreier Stahl. In practice, that means it is best used where toughness, tendency to work‑harden and thermal sensitivity are present. The insert is a standard indexable turning geometry and is intended for conventional turning toolholders where the TS16 form and IR13UN chip control are supported. For bespoke applications or unusual cutting parameters, technical advice is recommended to confirm optimum feed and speed settings. For tailored advice on Walter Tools Tiger·tec Gold inserts or to check stock and availability, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — our team will help select the right grade and chipbreaker for the task. Technical Data Article number: TS16-IR13UN-WMP32G-WALTER Product: TS16-IR13UN WMP32G Product type: Drehwendeschneidplatte Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR13UN Material group: M (rostfreier Stahl) Manufacturer: Walter Tools Facts SKU: TS16-IR13UN-WMP32G-WALTER Material code: M Suitability: rostfreier Stahl Special features Coating technology: Tiger·tec Gold Coating grade: WMP32G (coated carbide) Optimised chip control: IR13UN Application: medium to robust machining conditions on rostfreier Stahl FAQ What materials is this insert suitable for? The TS16-IR13UN WMP32G is specified for ISO group M and is suitable for machining rostfreier Stahl with a focus on stable chip formation and edge life. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold on the WMP32G grade enhances wear resistance and heat tolerance, extending insert life and contributing to process reliability when turning rostfreier Stahl. What is the role of the IR13UN chipbreaker? The IR13UN chipbreaker produces controlled, short chips that reduce built‑up edge and improve surface consistency during turning operations with the TS16‑form insert. Can this insert be used for heavy cuts? The insert is designed for medium to robust cutting conditions; stable edge behaviour and the coating support heavier engagement than uncoated grades, while maintaining repeatable results. Which toolholders accept this insert form? The TS16 geometry is a standard indexable turning form; it fits toolholders designed for TS16 inserts and benefits from holders that secure the insert for consistent clamping and orientation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Walter Tools is mentioned for identification of original factory‑new articles. There is no affiliation implied between our company and the named brands. The offered article is an original new product of the manufacturer.
TS16-IR14BSPT WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from a combination of durable coating technology, optimised chip control and dedicated suitability for rostfreier Stahl to keep turning operations productive and reliable. Order the insert directly via Metav Werkzeuge or consult the team for application-specific recommendations. TS16-IR14BSPT WMP32G indexable turning insert – Tiger·tec Gold grade for rostfreier Stahl (Walter Tools) TS16-IR14BSPT WMP32G is an indexable turning insert engineered for secure chip formation and reliable performance when machining rostfreier Stahl in medium to robust conditions Tiger·tec Gold coating for long tool life Optimised IR14BSPT chipbreaker for chip control Suited for rostfreier Stahl (material group M) Walter Tools quality for consistent results Higher productivity on rostfreier Stahl through advanced coating The combination of the WMP32G cutting grade and Tiger·tec Gold coating provides a clear productivity advantage when tackling rostfreier Stahl. The coated carbide substrate reduces wear rates under demanding thermal conditions, supporting longer uninterrupted cutting times. This results in fewer insert changes and lower process interruptions, which in turn improves throughput on serial turning tasks. Technical users will appreciate that the grade is selected specifically for materials that generate heat and tend to work-harden, where a stable cutting edge and consistent surface finish are priorities. Reliable chip control and process stability with the IR14BSPT breaker The IR14BSPT chipbreaker is designed to promote controlled chip formation when cutting tough, ductile materials. By shaping chips into predictable forms, the breaker reduces the likelihood of built-up edge and erratic cutting forces, improving dimensional stability and tool life. In practical terms, shops can expect steadier feed and speed windows and reduced secondary processes such as manual chip clearing. This targeted chip management supports safer, more efficient machining cycles and fewer quality deviations. Practical benefits that support shop-floor efficiency As an indexable insert from Walter Tools, this component offers repeatable performance and straightforward tool management. The insert’s specification simplifies inventory and grade selection for rostfreier Stahl applications, while the coating and breaker combination lowers the risk of unexpected tool failure. For production environments, that means increased machine availability and more consistent batch quality. For smaller job shops, the improved edge life translates into a better cost-per-part ratio and fewer setup interventions. For tailored cutting data, availability checks or rapid delivery options contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 and request advice for the Walter Tools TS16-IR14BSPT WMP32G insert Technical Data Article number: TS16-IR14BSPT-WMP32G-WALTER Name: Drehwendeschneidplatte TS16-IR14BSPT WMP32G Walter Tools Manufacturer: Walter Tools Facts Material group: M (rostfreier Stahl) Coating technology: Tiger·tec Gold Chipbreaker designation: IR14BSPT Special features Coated carbide cutting grade WMP32G Designed for medium to robust rostfreier Stahl machining conditions Stable chip formation and reliable cutting edge behaviour Indexable turning insert format TS16-IR14BSPT FAQ What materials is this insert intended for? The insert is formulated for machining rostfreier Stahl (material group M); the WMP32G grade and Tiger·tec Gold coating are optimised for these demanding conditions. How does the IR14BSPT chipbreaker affect machining? The IR14BSPT breaker promotes controlled chip formation, reducing built-up edge and improving process stability during turning operations with ductile, heat-generating materials. Is this insert suitable for high-feed turning strategies? The design focuses on stable cutting and predictable chips under medium to robust cutting parameters; specific high-feed suitability depends on toolholder geometry and cutting data. What advantage does the Tiger·tec Gold coating deliver? Tiger·tec Gold enhances wear resistance and thermal stability, extending edge life and enabling more consistent part quality over longer cutting intervals. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-IR14NPT WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WMP32G coated‑carbide grade for stable chip formation and extended tool life in rostfreier Stahl turning; the optimised IR14NPT chipbreaker delivers reliable machining under medium to robust conditions. Order directly via Metav Werkzeuge or ask our consultants for application support. TS16-IR14NPT WMP32G turning insert for rostfreier Stahl – Walter Tools The TS16-IR14NPT WMP32G is an indexable turning insert engineered for consistent chip control and repeatable edge stability in rostfreier Stahl machining. Tiger·tec Gold coating for improved wear resistance Optimised chip control for rostfreier Stahl machining Coated carbide grade WMP32G for edge stability Reliable performance under medium to robust conditions Maximise process security with a proven coating and grade The combination of the Tiger·tec Gold coating and the WMP32G coated‑carbide grade targets the typical challenges of rostfreier Stahl: high toughness, built‑up edge tendency and elevated heat generation. These technologies promote stable cutting edges and controlled wear, which translates into fewer interruptions during production and more predictable tool life. The result is a measurable improvement in process reliability and reduced scrap rates for machining tasks that demand repeatability. Better chip control reduces rework and downtime Equipped with the IR14NPT chipbreaker geometry, this insert facilitates secure chip formation even under medium to robust cutting conditions. Controlled chips lower the risk of surface damage and machine stoppages, which helps maintain cycle times and surface integrity. For operations that prioritise first‑pass quality, the insert’s chip management capability supports higher throughput and less manual intervention after turning operations. Robust edge behaviour for consistent component quality The coated carbide matrix of the WMP32G grade emphasises edge stability and wear resistance, helping to preserve dimensional accuracy across longer tool life. In practice, this means fewer insert changes, less measurement and alignment work between tool exchanges, and a steadier achievement of surface finish and tolerance targets. The technical composition is aimed at balancing toughness and hardness to withstand the tribological demands of rostfreier Stahl. Practical benefits for workshop productivity Beyond the metallurgy and geometry, the insert offers tangible shopfloor advantages: improved uptime through extended insert life, reduced need for corrective passes, and easier handling of complex rostfreier Stahl alloys. The design supports operators and process engineers looking to increase output without compromising part quality, contributing to a more efficient production cycle overall. Contact Metav Werkzeuge today for tailored application advice and reliable supply of Walter Tools turning inserts such as the TS16-IR14NPT WMP32G Technical Data Article number: TS16-IR14NPT-WMP32G-WALTER Product: Drehwendeschneidplatte TS16-IR14NPT WMP32G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR14NPT Material group: M (rostfreier Stahl) Facts Material group designation: M Suitable for: rostfreier Stahl Coating technology: Tiger·tec Gold Insert designation: TS16-IR14NPT WMP32G Special features Coated carbide cutting material Designed for medium to robust cutting conditions Optimised chip control geometry Focus on stable edge behaviour and wear resistance FAQ What materials is this insert designed for? The TS16-IR14NPT WMP32G is specifically intended for rostfreier Stahl applications, using the WMP32G coated‑carbide grade and Tiger·tec Gold coating to manage the typical machining challenges of those alloys. How does the Tiger·tec Gold coating help performance? Tiger·tec Gold improves wear resistance and thermal stability on the cutting edge, enabling the WMP32G grade to maintain consistent edge life during continuous rostfreier Stahl turning. Which chipbreaker is fitted and why does it matter? The IR14NPT chipbreaker is integrated to promote controlled chip formation; this reduces the risk of built‑up edge and helps maintain surface integrity and productivity when machining rostfreier Stahl with the TS16-IR14NPT WMP32G insert. Is this insert suitable for heavy cutting conditions? The insert is engineered for medium to robust conditions; the WMP32G grade and IR14NPT geometry offer resilience and stable performance under increased cutting loads common in rostfreier Stahl turning. Can Metav Werkzeuge provide application guidance for this insert? Metav Werkzeuge can advise on optimal parameters and suitability for specific rostfreier Stahl alloys, ensuring the TS16-IR14NPT WMP32G is matched to the process demands. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand‑new goods from the manufacturer. Walter Tools is noted for its precision tooling and is part of recognised global tool suppliers.
TS16-IR14NPTF WMP32G Wendeplatten - Walter Tools
The combination of coated carbide grade WMP32G and the Tiger·tec Gold series ensures reliable edge stability and consistent chip control in demanding stainless steel turning operations; benefit from improved process security and longer tool life. Order directly via Metav Werkzeuge or consult the team for application advice. TS16-IR14NPTF WMP32G indexable turning insert – Walter Tools A robust indexable turning insert designed for machining rostfreier Stahl under medium to heavy conditions, offering Tiger·tec Gold coating and an IR14NPTF chipbreaker for controlled chip formation Tiger·tec Gold coating performance Optimised chip control for rostfreier Stahl Coated carbide grade WMP32G Stable cutting edge for medium to heavy cuts Reliable edge life for demanding stainless steel turning The insert is engineered to provide consistent performance when machining rostfreier Stahl, a material group prone to toughness and built-up edge. The WMP32G grade, a coated carbide class within the Tiger·tec Gold family, combines wear resistance with fracture toughness to reduce unexpected tool changes. As a result, cycle times remain predictable and machine uptime is improved, translating into measurable production gains and fewer quality interruptions. Greater process security and improved surface quality By pairing the IR14NPTF chipbreaker with the Tiger·tec Gold technology, the design promotes reliable chip control and stable cutting edges. This reduces the tendency for built-up edge and improves surface finish consistency across batches. The constructive balance between coating and substrate hardness enables secure cutting at elevated temperatures common when machining rostfreier Stahl, thereby lowering rework rates and supporting stable, repeatable component quality. Practical benefits: fewer interruptions, simpler tool scheduling Integrating this indexable insert into a turning toolholder leads to fewer unscheduled stops thanks to its predictable wear behaviour. The coated carbide composition supports longer intervals between index changes and simplifies tooling logistics because the insert performs well across a range of medium to robust cutting parameters. Maintenance routines are easier to plan, and overall throughput benefits from the reduced frequency of insert replacements. Application advice and safe use recommendations The insert suits applications where reliable chip evacuation and edge stability are priorities in rostfreier Stahl turning. For best results, pair the insert with holders that ensure axial and radial support consistent with the TS16 designation; adjust feeds and speeds according to material batch characteristics and machine rigidity. The product’s specifications favour operations aiming for a balance between productivity and surface integrity rather than aggressive roughing alone. For tailored application support and to source genuine Walter Tools inserts such as the TS16-IR14NPTF WMP32G, contact Metav Werkzeuge for expert advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TS16-IR14NPTF-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-IR14NPTF WMP32G Walter Tools Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Material group: M Facts No numerical specifications provided Special features Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR14NPTF ISO designation: TS16-IR14NPTF WMP32G Suitable application: rostfreier Stahl FAQ What materials is this insert engineered for? The TS16-IR14NPTF WMP32G insert is designed primarily for rostfreier Stahl and supports medium to robust cutting conditions typical of those materials. How does the Tiger·tec Gold series improve performance? Tiger·tec Gold coating on the WMP32G grade enhances wear resistance and edge stability, resulting in more predictable tool life and improved process security when turning rostfreier Stahl. Which chipbreaker is integrated and what is its benefit? The IR14NPTF chipbreaker promotes controlled chip formation and evacuation, helping to avoid built-up edge and to maintain consistent surface quality during longer cycles. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
TS16-IR14UN WMP32G Wendeplatten - Walter Tools
Die Kombination aus der Tiger·tec Gold-Beschichtung, der Schneidstoffsorte WMP32G und dem optimierten IR14UN-Spanformer sorgt für stabile Spanbildung beim Drehen von rostfreiem Stahl; dadurch werden Standzeit und Prozesssicherheit gesteigert. Direkt über Metav Werkzeuge bestellbar oder bei Bedarf technische Beratung anfordern. TS16-IR14UN WMP32G — Indexable turning insert, Tiger·tec Gold (Walter Tools) The TS16-IR14UN WMP32G is an indexable turning insert engineered for reliable machining of rostfreier Stahl under medium to robust conditions Tiger·tec Gold coating for extended tool life Optimised IR14UN chipbreaker for stable chips Designed for machining rostfreier Stahl (M) Precision grade WMP32G for medium to robust cuts Higher throughput through consistent chip control The Tiger·tec Gold series delivers a combination of coated carbide technology and tailored geometry that reduces unplanned interruptions. The IR14UN chipbreaker is engineered to form short, controllable chips when cutting rostfreier Stahl, which limits heat concentration and reduces the tendency for built-up edge. As a result, cycle times remain consistent and tool changes become less frequent, contributing to measurable productivity gains on the shop floor. Durable performance from a specialised grade The WMP32G grade is a coated carbide formulation optimised for the demands of rostfreier Stahl machining. The coating enhances wear resistance and preserves a stable cutting edge under higher thermal stress, which is common when machining tough, work-hardening alloys. For operations requiring predictable tool life and repeatable surface results, the grade’s balance between toughness and hardness delivers a reliable compromise between longevity and cutting performance. Clear advantages for process reliability Adopting an insert with this combination of geometry and grade supports process security: stable edge retention, controlled chip evacuation and reduced rework. The insert’s design mitigates common issues such as work hardening and notch wear in stainless applications, enabling better adherence to scrap reduction targets and improved overall equipment effectiveness (OEE) in serial production. Ease of integration and application versatility The indexable design allows a straightforward changeover in standard toolholders; the designation is compatible with existing tool systems using the TS16 interface. The insert is suited to a range of turning operations from finishing to more robust cutting, providing flexibility across batch sizes and component types. Where wet or high-temperature cutting is required, the Tiger·tec Gold surface helps maintain cutting-edge integrity over extended runs. For application-specific advice on optimising machining of rostfreier Stahl with Tiger·tec Gold inserts or to request availability through Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TS16-IR14UN-WMP32G-WALTER Designation: TS16-IR14UN WMP32G Product type: Indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Facts Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IR14UN Material group: M (rostfreier Stahl) Special features Coated carbide grade suitable for rostfreier Stahl Optimised chip control for stable swarf formation Designed for medium to robust cutting conditions Walter Tools quality and application focus FAQ What materials is this insert intended for? The TS16-IR14UN WMP32G is designed primarily for rostfreier Stahl (material group M) and is engineered to manage the toughness and heat characteristics of these alloys. How does the IR14UN chipbreaker affect machining? The IR14UN chipbreaker produces controlled, short chips during turning, improving chip evacuation and reducing the risk of built-up edge when machining rostfreier Stahl with the WMP32G grade. Is the WMP32G grade suitable for finishing and roughing operations? Yes, the WMP32G grade provides a balance of wear resistance and toughness that makes it suitable for a range of operations from finishing to more robust cuts in rostfreier Stahl. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-IR14UN-F5 WMP32G Wendeplatten - Walter Tools
Benefit from the combination of high wear resistance, consistent chip control and reliable edge stability for efficient turning of stainless steel; order the insert directly via Metav Werkzeuge or consult the team for application advice. TS16-IR14UN-F5 WMP32G indexable turning insert – Tiger‑tec Gold coated grade for stainless steel (Walter Tools) The TS16-IR14UN-F5 WMP32G is an indexable turning insert developed for productive machining of stainless steel under medium to robust cutting conditions Tiger‑tec Gold coating for wear resistance Optimised IR14UN‑F5 chipformer for stable chips Designed for stainless steel (M) Coated carbide grade WMP32G Boost process reliability with a coated, application-focused solution The combination of Tiger‑tec Gold coating and the WMP32G grade provides a balance of wear resistance and toughness that supports longer tool life in demanding operations. The coating reduces flank wear and protects the substrate during elevated cutting temperatures typical of austenitic and martensitic alloys. For production environments where interrupted cuts or high heat generation occur, this insert helps maintain a consistent cutting edge and reduces unscheduled tool changes, improving overall productivity and process stability. Cleaner chips and longer edge life for stainless steel turning The IR14UN‑F5 chipbreaker is tailored to the metallurgical behaviour of stainless steels, promoting controlled chip formation and evacuation. By encouraging short, segmenting chips, the chipformer reduces the risk of entanglement and surface damage, which in turn preserves edge stability and surface finish quality. The combination of a coated carbide substrate and an optimised chip geometry means fewer reworks and steadier cycle times in batch and continuous turning operations where chip control is critical. Practical selection guidance for workshop use and tool management When choosing tooling for stainless steel applications, the economics of longer life and predictable performance matter. The TS16-IR14UN-F5 WMP32G insert is suited to medium to robust cutting conditions where resistance to build-up edge and thermal softening is required. As an indexable insert, it supports quick index changes and uncomplicated toolholder compatibility, reducing downtime. For parameter setting, start with conservative feeds and establish stable cutting speeds based on the workpiece grade, then adjust to production demands; the insert’s design aims to provide reliable performance across a range of commonly used stainless grades. Contact Metav Werkzeuge for application recommendations or to order this Walter Tools insert and ensure optimal integration into the production process Technical data SKU: TS16-IR14UN-F5-WMP32G-WALTER Article: TS16-IR14UN-F5 WMP32G Manufacturer: Walter Tools Product type: Indexable turning insert Facts Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: IR14UN‑F5 Material group: M (stainless steel) Special features Coating: Tiger‑tec Gold Substrate: coated carbide Application: stainless steel machining Typical use: medium to robust cutting conditions FAQ Which materials is this insert suitable for? The TS16-IR14UN-F5 WMP32G insert from Walter Tools is optimised for machining stainless steel (material group M), especially under medium to robust operating conditions. What does the designation WMP32G indicate? WMP32G is the Walter Tools grade designation for a coated carbide intended to offer a mix of wear resistance and toughness; it forms part of the Tiger‑tec Gold technology family. How does the IR14UN‑F5 chipformer improve machining? The IR14UN‑F5 chipbreaker promotes segmented, controllable chips for stainless steel, enhancing chip evacuation, reducing entanglement risk and supporting consistent surface finish. Is this insert suitable for interrupted cuts or heavy feeds? The design and coating of this insert support reliable performance in interrupted cuts and heavier engagement typical of robust stainless steel turning, improving edge life and process reliability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. References to brand names are for explanatory purposes only. The offered item is an original, factory‑new product from the manufacturer.
TS16-IR14W WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, secure chip control and a coated carbide grade optimised for stainless steels to keep production stable and predictable. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. TS16-IR14W WMP22G indexable turning insert, Tiger‑tec Gold – Walter Tools (for stainless steel) The TS16-IR14W WMP22G is an indexable turning insert from Walter Tools' Tiger‑tec Gold range, designed to deliver secure chip formation and stable cutting edges when machining stainless steel under medium to robust conditions. Tiger‑tec Gold coated carbide grade WMP22G Optimised for stainless steel (M) machining Reliable chip control with IR14W geometry Consistent edge life under robust conditions Increased productivity through optimised grade and coating The combination of the Tiger‑tec Gold technology and the WMP22G grade provides a coated carbide solution tailored for the specific demands of stainless steel machining. The coating reduces friction and supports thermal stability at the cutting edge, which in turn promotes secure chip formation and a stable cutting edge under intermittent or continuous loads. This technical pairing means fewer unscheduled tool changes and a more predictable process window, benefiting batch production and series machining alike. Stable chip control and longer edge life from IR14W geometry The IR14W chipbreaker geometry is engineered to manage the challenging chips produced by austenitic and martensitic stainless steels. By encouraging short, controlled chip segments and reducing the tendency for built‑up edge, the insert improves surface quality and lowers rework rates. The geometry, combined with the coated carbide substrate, enhances process reliability and leads to measurable improvements in tool life and cycle-time consistency. Robust performance for demanding turning operations Designed for medium to robust cutting conditions, the insert supports higher metal removal rates while maintaining edge integrity. The format and geometry suit common indexable insert toolholders, enabling straightforward integration into existing turning setups. Technical application data and machining parameters are available to ensure optimal performance in production contexts; this insert is particularly suited where predictable, repeatable results and reduced downtime are priorities. The TS16-IR14W WMP22G therefore represents a practical choice for manufacturers seeking consistent performance in stainless steel turning. Choose Walter Tools' Tiger‑tec Gold TS16‑IR14W WMP22G for process‑secure stainless steel turning — contact Metav Werkzeuge for application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TS16-IR14W-WMP22G-WALTER SKU: TS16-IR14W-WMP22G-WALTER Product type: indexable turning insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts No numerical data specified Special features Grade: WMP22G (coated carbide) Geometry: IR14W chipbreaker Application: stainless steel (M) Usage: medium to robust machining conditions FAQ What materials can be machined with this insert? The TS16-IR14W WMP22G insert is specified for stainless steel (material group M) and supports machining of austenitic and similar grades where secure chip formation is required. What benefit does the Tiger‑tec Gold technology provide? Tiger‑tec Gold enhances thermal stability and friction control on the cutting edge; in the TS16-IR14W WMP22G this results in improved edge life and more consistent surface finishes when turning stainless steels. How does the IR14W geometry affect chip behaviour? The IR14W chipbreaker is shaped to produce short, controlled chips and to reduce built‑up edge, improving surface quality and enabling more reliable, repeatable cutting conditions. Can this insert be used in standard toolholders? The TS16-IR14W format is compatible with corresponding indexable turning toolholders; adherence to holder manufacturer specifications is recommended to ensure correct clamping and performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
TS16-IR14W WMP32G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the IR14W chipbreaker to ensure stable chip formation and extended cutting edge life when machining rostfreier Stahl; order the insert via Metav Werkzeuge or consult the technical team for application support. TS16-IR14W WMP32G Turning indexable insert — Tiger‑tec Gold for rostfreier Stahl · Walter Tools The TS16-IR14W WMP32G is a coated turning insert designed for reliable performance in medium to robust stainless‑steel machining conditions. Tiger‑tec Gold coating for long tool life Optimised chip control with IR14W breaker Suited for rostfreier Stahl machining Consistent cutting performance for demanding rostfreier Stahl work The graded WMP32G composition, part of the Tiger‑tec Gold family, combines a wear‑resistant substrate with an advanced coating to support secure chip formation and a stable cutting edge under elevated temperatures. For machining rostfreier Stahl, where material toughness and heat generation can cause built‑up edge and erratic chips, the coated cemented carbide grade offers improved thermal resistance and flank wear behaviour. This yields more predictable tool life and a steadier surface finish, helping production to meet tolerances with fewer interruptions. Improved process security through chip control and geometry Integration of the IR14W chipbreaker reduces long, stringy chips and promotes controlled chip segmentation, which contributes directly to lower cycle‑time variability and safer turning operations. The insert geometry and chipbreaker interaction are engineered to support continuous metal removal in medium to robust conditions, reducing the need for frequent tool changes. Reliable chip control also minimises manual intervention at the machine and supports automated handling or chip disposal systems, enhancing overall workshop efficiency. Practical advantages for toolrooms and production lines Manufactured under the Walter Tools quality regime, this indexable cutting plate is intended for straightforward retrofitting into compatible toolholders and systems. The coated grade reduces wear rates during sustained cuts, which translates into less frequent tool indexing and lower process downtime. For production planners and shopfloor technicians, the tangible benefits are improved cycle consistency and reduced consumable throughput, while procurement gains from the predictability of performance associated with a recognised tooling brand. Contact Metav Werkzeuge for tailored application advice on the TS16-IR14W WMP32G insert or to request availability; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TS16-IR14W-WMP32G-WALTER Designation: TS16-IR14W WMP32G Product type: Turning indexable insert Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: IR14W Material group: M Facts ISO designation: TS16-IR14W WMP32G Suitable material group: M (rostfreie Stähle) Applicable to medium to robust machining conditions Brand: Walter Tools Special features Coated cemented carbide grade Optimised for rostfreier Stahl machining Stable chip formation via IR14W chipbreaker Designed for repeatable cutting edge performance Walter Tools product line FAQ What materials is this insert suitable for? The TS16-IR14W WMP32G insert is specified for the ISO material group M, meaning it is suitable for machining rostfreier Stahl and similar stainless‑steel grades. How does the Tiger‑tec Gold technology benefit production? The Tiger‑tec Gold coating on the WMP32G grade improves thermal resistance and wear performance, which supports longer cutting intervals and steadier surface quality in stainless‑steel turning. Which chip behaviour can be expected with the IR14W breaker? The IR14W chipbreaker is engineered to promote segmented and controllable chips during medium to robust cuts, reducing entanglement and facilitating safer chip flow. Is the insert compatible with standard turning toolholders? The TS16‑IR14W geometry follows common ISO designation conventions for turning inserts and is intended for use in compatible indexable toolholders that accept the TS16 form. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
TS16-IR14W-F5 WMP32G Wendeplatten - Walter Tools
The combination of the WMP32G grade and the Tiger·tec Gold coating delivers reliable chip control and extended edge life for stainless steel turning tasks; this ensures predictable machining performance and fewer interruptions. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. TS16-IR14W-F5 WMP32G turning insert (Tiger·tec Gold) for stainless steel — Walter Tools TS16-IR14W-F5 WMP32G is a coated indexable turning insert designed for medium to robust machining of stainless steel, offering a balanced mix of wear resistance and stable cutting behaviour Tiger·tec Gold coating for extended tool life Optimised for stainless steel machining Stable chip formation under medium-heavy cuts Reliable edge stability and repeatability Consistent productivity when machining stainless steel The insert is engineered for productivity: the WMP32G grade, part of the Tiger·tec Gold family, is a coated carbide solution tuned to the challenges of stainless steel. Materials in the M group tend to be tough and generate heat; the combination of coating technology and substrate hardness reduces adhesion and flank wear, which translates into longer intervals between tool changes and higher machine uptime. This rational benefit supports predictable cycle times and a more efficient production flow. Reduced downtime through predictable chip control A central advantage is controlled chip formation under moderate to heavy cutting conditions. The specified chipbreaker geometry promotes uniform chips and prevents built-up edge formation on the tool, resulting in a stable cutting edge and fewer stoppages for manual chip clearing. For operations where reproducibility matters, the insert’s behaviour supports consistent part quality and fewer process deviations, contributing directly to cost-efficiency and first-pass yield. Edge life and surface quality with advanced coating The Tiger·tec Gold coating provides a wear-resistant surface that lowers friction and improves thermal stability at the cutting zone. The coating, paired with the substrate of the grade, enhances tool life while maintaining surface finish on the workpiece. In practice this means sustained dimensional accuracy and surface integrity over longer tool life intervals — a key economic argument in serial production and batch machining of corrosion-resistant alloys. Practical application and process integration The insert integrates easily into standard toolholders and turning systems for industrial workshops. Its designation is suited to operations that encounter varying cut depths and interrupted cuts common when turning stainless steel components. For engineers and toolroom managers this means simplified tooling choices: one insert family that covers a wide range of M-group requirements while ensuring consistent performance and repeatability across shifts. Contact Metav Werkzeuge for tailored recommendations on cutting data and holder compatibility, or request assistance from their consultants to select the optimal insert variant for the specific stainless steel grade in use Technical Data Article number: TS16-IR14W-F5-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-IR14W-F5 WMP32G Walter Tools Product type: Turning insert (indexable) Manufacturer: Walter Tools Data Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IR14W-F5 Material group: M (stainless steel applicability) Special features Coated carbide (Tiger·tec Gold) Optimised for rostfreier Stahl (stainless steel) Designed for stable chip formation and edge durability Suitable for medium to robust cutting conditions FAQ What materials is this insert designed for? The TS16-IR14W-F5 WMP32G turning insert is specifically developed for rostfreier Stahl (stainless steel) and addresses the typical challenges of the M material group. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WMP32G grade reduces friction and enhances thermal resistance, which improves tool life and maintains surface finish during extended runs. Is the insert suitable for interrupted cuts? Yes, the chipbreaker IR14W-F5 and the grade’s robustness make the insert suitable for interrupted and medium-heavy cuts commonly encountered in stainless steel turning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-IR16ACME WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for secure chip formation and extended edge life in stainless steel turning operations; order the insert via Metav Werkzeuge or contact our consultants for application advice. TS16-IR16ACME WMP32G indexable turning insert — Tiger·tec Gold grade for stainless steel (Walter Tools) The TS16-IR16ACME WMP32G is an indexable turning insert engineered for reliable, repeatable machining of stainless steels in medium to robust conditions Tiger·tec Gold coating for process security IR16ACME chipbreaker for controlled chips Optimised for stainless steel (ISO M) machining Consistent cutting-edge stability Secure performance for stainless steel machining The WMP32G grade, part of the Tiger·tec Gold family, is a coated carbide solution designed specifically to address the challenges of stainless steel (ISO group M). Its coating system reduces adhesion and heat transfer at the cutting edge, which limits built-up edge and preserves the cutting geometry over longer production runs. This results in increased process reliability and fewer interruptive tool changes, supporting higher machine utilisation and predictable cycle times. Controlled chip formation and improved surface finish The IR16ACME chipbreaker geometry provides reliable chip control under varying feed and depth conditions typical in stainless steel turning. Stable chip formation not only reduces the risk of workpiece damage and machine stoppages but also helps achieve a consistent surface finish. The combination of advanced chipformer geometry and the Tiger·tec Gold coating means parts leave the machine with fewer rework requirements and a reduced need for downstream finishing. Lower operating costs through extended tool life By offering a stable cutting edge and resistance to the thermal and adhesive wear mechanisms common in stainless-steel turning, this insert contributes to longer tool life and fewer indexings. The economic benefit is twofold: reduced tooling consumption and less production downtime. The coated WMP32G grade is suitable for medium to robust cutting conditions, making it a pragmatic choice where both productivity and repeatability are priorities. Easy specification and application support for production teams Integration into existing turning toolholders is straightforward thanks to standard insert geometry and designation. For customers requiring setup support or optimised cutting data, Metav Werkzeuge provides application consultation and can advise on insert geometry, grade selection and cutting parameters to match specific machine and part requirements. This pragmatic support ensures the technical advantages of the insert translate directly into shop-floor performance gains. For tailored recommendations on implementing the Tiger·tec Gold WMP32G insert in stainless-steel turning operations, please contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 — our specialists will advise on the optimal geometry and supply options. Technical data Article number: TS16-IR16ACME-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-IR16ACME WMP32G Walter Tools Type: Indexable turning insert (Drehwendeschneidplatte) Grade: WMP32G Series: Tiger·tec Gold Manufacturer: Walter Tools Core data Material group: M (stainless steels) Coating: Tiger·tec Gold Chipbreaker: IR16ACME Designation: TS16-IR16ACME WMP32G SKU/UID: TS16-IR16ACME-WMP32G-WALTER Special features Coated carbide grade optimised for stainless steel Stable cutting edge for medium to robust conditions Improved adhesion and heat resistance Suitable for standard turning toolholders FAQ What materials is this insert suited for? The TS16-IR16ACME WMP32G insert is formulated for stainless steel applications (ISO group M), offering secure chip formation and reduced built-up edge. How does the IR16ACME chipbreaker affect productivity? The IR16ACME chipbreaker promotes consistent chip control, which reduces interruptions and tool-related stoppages and contributes to steadier cycle times with the WMP32G grade. Can this insert be used in high-feed or interrupted cuts? The WMP32G grade, combined with the IR16ACME geometry, is intended for medium to robust cutting conditions; suitability for specific high-feed or interrupted applications should be confirmed with cutting data, which Metav Werkzeuge can provide. What are the main benefits of the Tiger·tec Gold coating? The Tiger·tec Gold coating enhances heat resistance and lowers adhesion at the cutting edge, resulting in longer edge life and more consistent surface quality when machining stainless steels. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TS16-IR16UN WMP22G Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Gold technology and the WMP22G grade for reliable, repeatable performance in rostfreier Stahl machining; excellent edge stability and optimised chip control reduce downtime and improve process security. Order directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. TS16-IR16UN WMP22G indexable turning insert – Tiger‑tec Gold coating, for rostfreier Stahl (Walter Tools) TS16-IR16UN WMP22G is an indexable turning insert designed for robust machining of rostfreier Stahl in medium to heavy cutting conditions Tiger‑tec Gold coating for extended tool life WMP22G grade: coated carbide for tough conditions Optimised chip control on rostfreier Stahl Reliable edge stability and broad material range Consistent performance for demanding rostfreier Stahl work The Tiger‑tec Gold technology combined with the WMP22G grade provides a balanced approach to wear resistance and fracture toughness. In rostfreier Stahl applications, which are prone to work hardening and high cutting temperatures, this coated carbide composition supports a stable cutting edge and predictable wear behaviour. The result is fewer unplanned insert changes and a more consistent surface finish, making the solution suitable for job shops and production environments that require dependable cycle times and lower tooling-related interruptions. Improved chip control and machining security The integrated IR16UN chipbreaker geometry is designed to shape and evacuate chips reliably during turning operations on rostfreier Stahl. Better chip formation reduces the risk of built-up edge and promotes a steady metal removal rate, which in turn supports higher process stability and improved component quality. This geometry helps maintain tool life under unreliable conditions and contributes to safer machine operation by avoiding long, stringy chips that can affect downstream processes. Productivity benefits and predictable tool life Adopting this insert in compatible toolholders delivers measurable productivity advantages: fewer tool changes, reduced scrap rates and enhanced repeatability. The coated carbide construction and optimised chip control combine to extend effective cutting lengths and simplify tool management. For production planning, this means more reliable cycle times and a clearer view of tooling costs per part. Where process repeatability and surface integrity are priorities, this turning insert helps to stabilise the machining chain and supports higher overall equipment effectiveness. Contact Metav Werkzeuge for tailored application support on Walter Tools Tiger‑tec Gold inserts and to request availability details via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TS16-IR16UN-WMP22G-WALTER Article: Drehwendeschneidplatte TS16-IR16UN WMP22G Walter Tools Manufacturer: Walter Tools Product type: indexable turning insert Grade: WMP22G Facts Material group: M (rostfreie Stähle) Suitable for: rostfreier Stahl Chipbreaker: IR16UN Series: Tiger‑tec Gold Special features Coating technology: Tiger‑tec Gold Substrate: coated carbide (beschichtetes Hartmetall) Application: medium to robust cutting conditions on rostfreier Stahl Benefit: optimised chip formation and edge stability FAQ What materials is the insert suited for? The TS16-IR16UN WMP22G insert is intended primarily for machining rostfreier Stahl and is developed for the specific challenges of these alloys. What does the WMP22G grade mean in practice? WMP22G is a coated carbide grade formulated to balance wear resistance and toughness for reliable performance in medium to robust rostfreier Stahl applications. How does the IR16UN chipbreaker help production? The IR16UN chipbreaker promotes controlled chip formation and easier evacuation, reducing the risk of built-up edge and improving surface quality during turning. Can this insert be used for finishing and semi-finishing? Yes; the combination of coating and geometry provides flexibility for semi-finishing and finishing passes, offering consistent surface integrity on rostfreier Stahl. Is the insert suitable for automated production environment? The insert’s predictable wear characteristics and optimised chip control make it suitable for automated and high-repetition production, where process stability is essential. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is original, factory-new goods from the manufacturer.
TS16-IR16UN WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a purpose‑built WMP32G grade and the IR16UN chipbreaker for secure machining of stainless steels; this results in reliable chip control, improved tool life and consistent production output. Order the TS16-IR16UN WMP32G directly via Metav Werkzeuge or consult our specialists for application advice. TS16-IR16UN WMP32G — Indexable turning insert, Tiger·tec Gold for stainless steels (Walter Tools) TS16-IR16UN WMP32G is an indexable turning insert optimised for machining stainless steels under medium to robust conditions, combining Walter Tools' Tiger·tec Gold coating technology with a WMP32G carbide grade. Tiger·tec Gold coating for edge stability Optimised for stainless steels (ISO group M) Stable chip control with IR16UN chipbreaker Improved cutting security for stainless steels The WMP32G grade, utilising Tiger·tec Gold coating technology, is engineered to address the specific challenges of working with stainless steels—notably toughness, tendency to build up on the cutting edge and heat generation. The coated cemented carbide construction provides a balance between wear resistance and toughness, which helps to maintain a stable cutting edge over longer tool life. For operations where consistent dimensional results and reduced rework are priorities, the grade's stability supports predictable performance without complex setup changes. Precise chip control and process reliability Equipped with the IR16UN chipbreaker, the insert promotes stable chip formation and effective chip evacuation in typical turning cycles. Stable chip behaviour reduces the risk of built‑up edge and surface damage, contributing directly to shorter interruption times and improved throughput. Where medium to robust cutting conditions are encountered, the combination of chipbreaker geometry and coated carbide composition helps maintain edge stability, supporting repeatable machining across production batches. Practical benefits for workshop productivity As an indexable insert, the TS16-IR16UN WMP32G simplifies tool management: multiple cutting edges are available from each insert, allowing quick indexation and lower tooling overhead than solid‑tool alternatives. The mechanical simplicity of insert replacement minimises downtime, while the robustness of the Tiger·tec Gold coating reduces the frequency of tool change‑outs. In short production environments seeking to improve uptime and reduce tooling logistics, this solution offers a practical route to greater productivity. Suitable applications and material compatibility Classified for ISO group M, the insert is particularly well suited to machining a wide range of stainless steels where secure chip control and consistent surface quality are required. The WMP32G grade is intended for medium to heavier engagement settings; finishing cuts are possible when parameters are adapted, but the real strengths are in operations where reliable performance under thermal and mechanical load is essential. For specific alloy types or unusual geometries, technical consultation can help determine optimal feed and speed windows to exploit the insert's capabilities. For tailored recommendations on using the Walter Tools Tiger·tec Gold grade or to arrange supply and delivery through Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: TS16-IR16UN-WMP32G-WALTER Designation: TS16-IR16UN WMP32G Product type: indexable turning insert Series: Tiger·tec Gold Grade: WMP32G Core data Material group: M (stainless steels) Chipbreaker: IR16UN Special features Coating: Tiger·tec Gold coated carbide Application: medium to robust cutting conditions Manufacturer: Walter Tools FAQ What materials is this insert best suited for? The TS16-IR16UN WMP32G is tailored for stainless steels (ISO group M) and performs well where toughness and heat generation demand a stable cutting edge. What does the WMP32G designation indicate? WMP32G denotes Walter Tools' coated cemented carbide grade within the Tiger·tec Gold family, engineered for wear resistance and reliable edge retention in demanding stainless steel applications. How does the IR16UN chipbreaker affect machining? The IR16UN chipbreaker promotes controlled chip formation and evacuation, reducing the risk of built‑up edge and supporting consistent surface finish during medium to robust turning operations. Is this insert suitable for finishing cuts? While optimised for medium to robust cutting, finishing passes are possible with adapted feeds and speeds; the insert's strength is greatest where process security and tool life are priorities. Manufacturer: Walter AG (Walter Tools), Derendinger Straße 53, 72072 Tübingen, Germany. Trademarks and trade names are the property of their respective owners. The referenced brand is used for explanation of product compatibility and does not imply any affiliation. The offered article is an original, new product of the manufacturer.
TS16-IR16UN-2 WMP32G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the IR16UN-2 chipbreaker, this insert delivers reliable chip control and extended edge life in the machining of stainless steel; its WMP32G grade provides wear resistance in medium to robust conditions. Order the TS16-IR16UN-2 WMP32G directly via Metav Werkzeuge or ask our consultants for application guidance. TS16-IR16UN-2 WMP32G — Walter Tools turning insert with Tiger·tec Gold for stainless steel A TS16-IR16UN-2 WMP32G turning insert engineered for consistent performance when machining stainless steel, offering stable chip formation and a coated carbide grade optimised for demanding conditions Tiger·tec Gold coating for long edge life Optimised IR16UN-2 chip control Coated carbide grade WMP32G for stainless steel Stable cutting behaviour under varied conditions Longer tool life through advanced coating and grade The combination of the Tiger·tec Gold coating and the WMP32G grade provides a measurable benefit in edge stability and wear resistance when machining stainless steel. The coated carbide construction reduces flank wear and resists the tendency for built-up edge, which is common with tough, heat-generating materials. As a result, cycle times become more predictable and replacement intervals are extended, supporting higher overall productivity and fewer unplanned interventions. The construction is aimed at machining environments with medium to robust cutting demands, where consistent tool performance contributes directly to process efficiency and component quality. Predictable chip control for safer, cleaner turning The integrated IR16UN-2 chipbreaker is designed to produce controllable chip forms when working with stainless steel, reducing the risk of long, entangling swarf that can interrupt automatic feeding or damage machined surfaces. Controlled chip evacuation improves surface finish and reduces handling time during and after machining. Conforming to ISO grouping for material M, this solution supports reliable chip formation and minimises the formation of built-up edge, which in turn keeps surface integrity and dimensional accuracy within tighter tolerances on turned components. Practical benefits for workshops and production lines As a turning insert, the TS16-IR16UN-2 WMP32G supports stable cutting performance across batch and single-piece production. The coated carbide technology and the chipbreaker geometry aim to lower total machining costs by extending service life and reducing scrap through improved process stability. Operators and process planners gain a reproducible cutting behaviour that eases parameter selection and shortens setup validation. The grade choice reflects Walter Tools’ design philosophy of combining wear resistance with broad material coverage, which helps to simplify tool inventories for stainless steel applications. Contact Metav Werkzeuge for tailored advice on integrating Walter Tools Tiger·tec Gold inserts into production processes: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: TS16-IR16UN-2-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-IR16UN-2 WMP32G Walter Tools Series: Tiger-tec Gold Grade: WMP32G Chipbreaker: IR16UN-2 Material group: M Manufacturer: Walter Tools Facts Suitable for stainless steel: yes Special features Coating: Tiger·tec Gold (coated carbide) Recommended application: stainless steel (ISO group M) Product type: Turning insert Chipbreaker geometry: IR16UN-2 FAQ What materials is this insert intended for? The TS16-IR16UN-2 WMP32G is intended primarily for stainless steel, indicated by its material group M and its WMP32G coated carbide grade designed for such alloys. How does the IR16UN-2 chipbreaker improve machining results? The IR16UN-2 chipbreaker promotes controlled chip formation and evacuation when machining stainless steel, reducing swarf entanglement and helping to maintain surface finish and dimensional consistency. Is the Tiger·tec Gold coating suitable for heavy-duty turning? Yes, the Tiger·tec Gold coating on the WMP32G grade enhances wear resistance and edge stability under medium to robust cutting conditions, supporting longer tool life in demanding stainless steel operations. Can this insert reduce downtime in production environments? By providing stable cutting behaviour and extended edge life, the TS16-IR16UN-2 WMP32G contributes to fewer unexpected tool changes and more predictable process intervals, helping to lower downtime and improve throughput. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Walter Tools: Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-IR16UN-F5 WMP32G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WMP32G grade for secure chip formation and extended edge life when machining rostfreien Stahl; the IR16UN‑F5 chipbreaker further stabilises cutting performance. Benefit from predictable process behaviour and high productivity — order the TS16‑IR16UN‑F5 WMP32G turning insert directly via Metav Werkzeuge or ask the consultants for application advice. TS16‑IR16UN‑F5 WMP32G Drehwendeschneidplatte — indexable insert for rostfreien Stahl by Walter Tools TS16‑IR16UN‑F5 WMP32G is a precision turning insert designed for reliable performance in medium to robust machining of rostfreien Stahl. Tiger·tec Gold coating for high wear resistance WMP32G grade optimised for rostfreie Stähle IR16UN‑F5 chipbreaker for stable chip control Robust, repeatable cutting performance by Walter Tools Increased productivity on rostfreien Stahl through optimised coating and grade The combination of the Tiger·tec Gold technology with the WMP32G composition targets the specific challenges of machining rostfreien Stahl: high toughness, tendency to build up on the cutting edge and elevated heat generation. By promoting a stable cutting edge, the insert reduces the risk of built-up edge and unplanned tool changes, which directly improves process efficiency. The result is a consistent surface finish and longer effective tool life compared with uncoated or generic grades. For operators and process engineers, this means fewer interruptions and a higher overall output from turning operations when handling corrosion-resistant alloys. Stable chip control and predictable cutting behaviour for secure process windows The IR16UN‑F5 chipbreaker is engineered to support dependable chip formation under medium to robust cutting conditions. Controlled chips reduce the likelihood of entanglement and machine downtime while assisting coolant access at the cutting zone. As an indexable insert, the component enables rapid orientation changes and economical cutting-edge use; insert indexing is a simple way to recover performance without full tool replacement. The design philosophy prioritises repeatable results, so cycle times remain stable across batches and operators benefit from lower process variability. Easy integration into production and clear application guidance The insert is presented in the ISO designation TS16‑IR16UN‑F5 WMP32G, compatible with standard clamping systems intended for this insert geometry. The designation follows ISO conventions and the insert is suitable for the ISO 513 material group M, explicitly denoting rostfreie Stähle. For selection, the grade WMP32G is recommended for medium to demanding conditions on corrosion‑resistant alloys; carbide‑based coated grades like this one help manage thermal loads and secure chip formation. Technical teams can therefore define cutting data with confidence and expect consistent tool life under defined process parameters. Contact Metav Werkzeuge for a tailored recommendation on the TS16‑IR16UN‑F5 WMP32G turning insert by Walter Tools and to check stock and delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TS16-IR16UN-F5-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-IR16UN-F5 WMP32G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte / indexable insert Series: Tiger·tec Gold Grade: WMP32G Facts ISO designation: TS16‑IR16UN‑F5 WMP32G Material group (ISO 513): M (rostfreie Stähle) Chipbreaker: IR16UN‑F5 Special features Coating technology: Tiger·tec Gold Application: medium to robust machining of rostfreien Stahl Material group marking: M Robust and repeatable cutting performance FAQ Which materials are suitable for this insert? The TS16‑IR16UN‑F5 WMP32G insert from Walter Tools is specified for the ISO 513 material group M, which covers rostfreie Stähle; the grade supports medium to robust machining conditions for such alloys. What advantages does Tiger·tec Gold provide? The Tiger·tec Gold coating improves wear resistance and thermal stability, helping the insert maintain a stable cutting edge and consistent performance when machining rostfreie Stähle. How does the IR16UN‑F5 chipbreaker affect machining? The IR16UN‑F5 chipbreaker promotes reliable chip formation and evacuation, reducing entanglement and supporting uninterrupted production runs with predictable cutting forces. Is this insert compatible with standard clamping systems? The ISO designation TS16‑IR16UN‑F5 WMP32G indicates compatibility with the corresponding insert pocket and clamping systems used for this geometry, enabling straightforward integration into existing toolholders. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
TS16-IR16W WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP32G grade and the IR16W chipbreaker for reliable machining of stainless steel; this yields stable cutting edges and consistent chip control in moderate to robust turning tasks. Order the TS16-IR16W WMP32G turning insert directly via Metav Werkzeuge or ask the consultants if needed. TS16-IR16W WMP32G indexable turning insert – Tiger·tec Gold coating for stainless steel, Walter Tools The TS16-IR16W WMP32G is a coated, cemented-carbide indexable turning insert from the Tiger·tec Gold series, optimised for secure chip formation and repeatable performance when machining stainless steels in moderate to robust conditions. Tiger·tec Gold coating technology WMP32G grade for stainless steel IR16W chipbreaker for stable chips Coated cemented carbide substrate Consistent cutting performance for stainless-steel turning The combination of a coated cemented-carbide substrate and the WMP32G grade delivers consistent wear resistance under the thermal and adhesive challenges posed by stainless steel. The Tiger·tec Gold coating increases resistance to abrasive and adhesive wear, reducing the incidence of built-up edge and extending tool life. In practice, this means fewer tool changes and more reliable cycle times on turning operations where material toughness and heat generation demand a robust cutting edge. Chip control that supports process stability The integrated IR16W chipbreaker is designed to promote short, controllable chips when machining tough, low-thermal-conductivity alloys. Improved chip control lowers the risk of entanglement and reduces manual intervention at the machine, which enhances operator safety and keeps automated processes flowing. For shops aiming to increase throughput, the predictable chip form translates directly into reduced downtime and improved reproducibility between components. Practical advantages for production and tool management Adopting this insert can simplify inventory and application decisions: the grade is specifically adapted to M class materials (stainless steels) and the insert form fits standard turning toolholders that accept TS16 profiles. The result is straightforward tool assignment across varied stainless-steel turning tasks. In addition, the coated substrate and established geometry support steady machining under mixed conditions, helping to secure process windows without excessive trial cutting. How the technology benefits machining outcomes Tiger·tec Gold’s multilayer coating technology enhances resistance to thermal shock and flank wear, which is beneficial when facing interrupted cuts or variable feed rates. The WMP32G composition balances toughness and hardness to limit chipping while maintaining edge stability. Together with the IR16W chipbreaker, these features reduce the typical failure modes encountered in stainless-steel turning, such as edge buildup and unpredictable flank wear, thereby supporting both part quality and tool-life optimisation. Contact Metav Werkzeuge for application guidance on Walter Tools Tiger·tec Gold inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and ordering assistance Technical data Article number: TS16-IR16W-WMP32G-WALTER Designation: TS16-IR16W WMP32G Manufacturer: Walter Tools Facts Material group: M (stainless steel) Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR16W Special features Coated cemented carbide (coated hardmetal) Optimised for stable chip formation in stainless steels Suited to moderate to robust cutting conditions Repeatable edge stability and wear resistance FAQ What materials is this insert suitable for? The TS16-IR16W WMP32G indexable turning insert (SKU TS16-IR16W-WMP32G-WALTER) is specified for M material group applications, i.e. stainless steels, and is designed to cope with the adhesive and thermal challenges typical of those alloys. How does the Tiger·tec Gold coating help in practice? The Tiger·tec Gold coating on the WMP32G grade reduces abrasive and adhesive wear, improving flank wear resistance and helping to prevent built-up edge during stainless-steel turning, which in turn supports longer tool life and consistent surface quality. Which chipbreaker is fitted and what is the benefit? The insert features the IR16W chipbreaker, engineered to produce short, controllable chips when machining tough materials; this enhances process stability and reduces the need for manual chip management. Can this insert be used for roughing and finishing operations? The WMP32G grade and coated substrate offer a balance of toughness and wear resistance suitable for a range of turning tasks; selection for roughing or finishing should follow workpiece specifications and cutting parameters, with the IR16W chip geometry favouring reliable chip control across mixed operations. Is the insert compatible with standard TS16 toolholders? The designation TS16-IR16W indicates compatibility with toolholders accepting the TS16 profile; confirmation with the toolholder manufacturer or Metav Werkzeuge’s technical advisors is recommended for assured fitment. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the named manufacturers; the offered item is an original, factory-new product from the manufacturer.
TS16-IR18UN WMP22G WMP22G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WMP22G grade for reliable edge life and stable chip formation when machining rostfreier Stahl; order the insert directly via Metav Werkzeuge or ask the consultants for tailored application advice. TS16-IR18UN WMP22G indexable turning insert — Tiger·tec Gold coating, for rostfreier Stahl (Walter Tools) The TS16-IR18UN WMP22G is an indexable turning insert engineered for demanding machining of rostfreier Stahl, offering a coated carbide grade and a dedicated chipbreaker for consistent chip control and extended tool life. Tiger·tec Gold coated carbide Optimised for rostfreier Stahl (M) IR18UN chipbreaker for stable chips Walter Tools quality and repeatability Proven process reliability through coating and grade The combination of Tiger·tec Gold coating and the WMP22G grade provides a robust wear resistance profile that supports a stable cutting edge under the thermal and mechanical loads typical of rostfreier Stahl. The coated carbide substrate helps to reduce flank wear and adhesion, which in turn extends service intervals and lowers tool change frequency. For production environments where reproducible results are required, this insert reduces downtime and contributes to consistent component quality, making the process more predictable and cost-effective. Consistent chip control and better surface integrity Rostfreier Stahl tends to produce long, ductile chips and is prone to built-up edge formation; the IR18UN chipbreaker is designed to fragment and evacuate chips effectively, maintaining a clean cutting zone. Improved chip control reduces the risk of workpiece damage and supports improved surface finish with fewer rework cycles. The indexed geometry of the insert allows multiple cutting edges to be used before replacement, supporting steady throughput and reliable part presentation in automated turning operations. Productivity gains with predictable tool life Designed for medium to robust cutting conditions, the grade delivers a balance between wear resistance and toughness that supports higher cutting parameters where appropriate. This makes it easier to plan machining cycles and calculate cost-per-part with greater confidence. The result is higher productivity per toolholder and fewer unplanned interruptions. Selection of the correct feed and speed, guided by the grade characteristics, will typically improve cycle times while keeping tool consumption under control. Practical integration and handling for the workshop The insert fits standard turning toolholders and is compatible with established tool management routines. Indexing is straightforward, and workpiece-oriented tooling setups will benefit from the insert’s repeatable seating and edge security. For specification checks, clamping recommendations or optimisation for specific rostfreier Stahl grades, technical consultation is available to align tooling decisions with process targets. Recommended storage and handling prevent edge damage and ensure the insert performs to specification across its service life. Contact Metav Werkzeuge today for application support and ordering: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: TS16-IR18UN-WMP22G-WALTER Article name: Drehwendeschneidplatte TS16-IR18UN WMP22G Walter Tools Product type: Indexable turning insert Brand: Walter Tools Facts Grade: WMP22G Applicable material group: M (rostfreier Stahl) Chipbreaker: IR18UN Series: Tiger·tec Gold Special features Coating: Tiger·tec Gold Base material: coated carbide Designed for stable chip formation Optimised for rostfreie Stähle and medium to robust conditions FAQ What materials is this insert best suited for? The TS16-IR18UN WMP22G insert is optimised for rostfreier Stahl (material group M) and provides controlled chip formation and wear resistance for those applications. How does the IR18UN chipbreaker improve machining? The IR18UN chipbreaker reduces long, stringy chips typical of rostfreier Stahl, improving chip evacuation and helping to maintain a stable cutting edge for consistent surface finish. Is the insert compatible with standard toolholders? Yes, the indexable design is compatible with common turning toolholders; ensure the seat and clamping torque conform to the holder manufacturer’s instructions. What benefits does the Tiger·tec Gold coating bring? The Tiger·tec Gold coating increases thermal and abrasive resistance, supporting longer edge life and more predictable performance under variable cutting conditions. How often should the insert be indexed or replaced? Indexing intervals depend on cutting parameters and workpiece alloy; monitoring part finish and tool wear will indicate the optimal change points for consistent quality. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-IR18UN WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the WMP32G grade and Tiger‑tec Gold coating for dependable machining of stainless steels; the IR18UN chipbreaker ensures stable chip formation and reduced downtime. Order directly via Metav Werkzeuge or contact their consultants for material‑specific recommendations. TS16-IR18UN WMP32G indexable turning insert – Tiger‑tec Gold, for stainless steels (Walter Tools) TS16-IR18UN WMP32G is a coated indexable turning insert designed for reliable performance when machining stainless steels in medium to robust conditions Tiger‑tec Gold coated grade WMP32G Optimised chip control IR18UN Suitable for stainless steels (ISO group M) Predictable performance for stainless steel turning The combination of the WMP32G cutting grade and Tiger‑tec Gold coating gives a dependable solution for turning stainless steels. This indexable turning insert is a coated carbide design aimed at countering the typical challenges of these alloys—toughness, built‑up edge and elevated cutting temperatures. The result is stable chip formation and consistent cutting behaviour that supports repeatable process parameters and lowers the risk of unexpected tool failures. Longer cutting edge life and consistent surface quality Built to deliver edge stability under medium to robust cutting conditions, this insert extends productive tool life while maintaining finish quality. The specified IR18UN chipbreaker helps to control chip shape and evacuation, reducing interruptions for manual clearing and minimising surface defects. For production environments this translates into fewer tool changes and increased productivity, with predictable wear patterns that simplify tool management. Practical application and machining benefits The insert is particularly suitable where turning of stainless steels is required and where process reliability matters. Its coated carbide construction and geometry make it a strong candidate for operations that demand steady metal removal rates and good chip control. Metav Werkzeuge’s technical team can advise on optimal cutting data for the material and machine in use to exploit the insert’s advantages in cycle time and surface consistency. Contact Metav Werkzeuge for tailored recommendations on using Tiger‑tec Gold inserts in stainless steel applications — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data Article number: TS16-IR18UN-WMP32G-WALTER Product type: Indexable turning insert Brand: Walter Tools ISO designation: TS16-IR18UN WMP32G Facts Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: IR18UN Special features Coated carbide (coated hardmetal) Designed for stainless steels (ISO group M) Intended for medium to robust cutting conditions FAQ What materials is this insert suitable for? The TS16-IR18UN WMP32G insert is suitable for stainless steels (ISO group M) and is optimised to manage their toughness and heat‑related behaviour. What is the purpose of the IR18UN chipbreaker? The IR18UN chipbreaker on this insert controls chip form and evacuation to support continuous cutting, minimise built‑up edge and enhance surface quality. How does Tiger‑tec Gold improve performance? The Tiger‑tec Gold coating provides enhanced wear resistance and heat protection on the coated carbide substrate, resulting in longer tool life and more consistent cutting behaviour. Can this insert be used for light finishing and heavier turning? Yes; the insert is specified for medium to robust conditions and delivers consistent edge stability suitable for both finishing and heavier stock removal when appropriate cutting data are used. Who can advise on optimal cutting data for this insert? Metav Werkzeuge’s consultants can provide application‑specific recommendations for the TS16-IR18UN WMP32G insert to match machine capability and workpiece material. Manufacturer: Walter Tools (part of the Sandvik Group); AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation or sponsorship implied between Metav Werkzeuge and the trademark holders. The offered item is an original, factory‑new product of the manufacturer.
TS16-IR18UN-F5 WMP32G WMP32G Wendeplatten - Walter Tools
Optimise machining of stainless steels with the coated‑carbide Tiger‑tec Gold WMP32G grade and the IR18UN‑F5 chipbreaker for stable cutting edges, improved chip control and longer tool life; order directly via Metav Werkzeuge or consult our application specialists for tailored cutting data. TS16-IR18UN-F5 WMP32G – Indexable turning insert, Tiger‑tec Gold for stainless steels by Walter Tools A TS16-IR18UN-F5 WMP32G turning insert engineered for secure chip control and extended edge life during medium to robust stainless‑steel turning applications Tiger·tec Gold coating for extended tool life Optimised IR18UN‑F5 chip control Specifically for machining stainless steels Coated carbide grade WMP32G for stability Consistent performance in stainless‑steel turning The combination of the Tiger‑tec Gold coating and the WMP32G grade supplies high thermal resistance and reliable wear protection for demanding work on stainless steels (ISO group M). This coated carbide formulation reduces the tendency for built‑up edge and preserves the cutting geometry under elevated temperatures. The result is a consistent surface finish and fewer tool changes, which supports longer uninterrupted machine cycles and improved shop‑floor productivity. Reliable chip control that reduces rework Equipped with the IR18UN‑F5 chipbreaker, the insert promotes short, controllable chips that evacuate cleanly from the cutting zone. Good chip control lowers the risk of surface damage and minimises manual intervention, leading to faster cycle times and less downtime for cleaning or rework. In practical terms, predictable chip formation simplifies process planning and contributes directly to higher first‑piece quality and lower scrap rates. Straightforward selection and productive integration Designed for turning operations in the M material class, the insert fits standard indexable toolholders and is suitable for medium to robust cutting conditions where process stability is critical. The WMP32G grade offers a balance of toughness and wear resistance, making it an economical choice across a broad range of stainless‑steel alloys. For customers seeking reliable cutting data and optimisation tips, the insert’s specification supports quick integration into existing production chains while improving overall machining reliability. For tailored cutting data, availability and to secure a supply of Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for immediate application advice and ordering assistance Technical Data SKU: TS16-IR18UN-F5-WMP32G-WALTER Article designation: TS16-IR18UN-F5 WMP32G Product type: indexable turning insert Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: IR18UN-F5 Manufacturer: Walter Tools Facts ISO group: M (stainless steels) Coating: Tiger‑tec Gold (coated carbide) Application: stainless steel machining Suitability: medium to robust cutting conditions Special features Coated carbide grade for a stable cutting edge Optimised chip formation to reduce built‑up edge Increased process reliability and longer tool life Suitable for standard turning/indexable toolholders FAQ What materials is this insert suitable for? The TS16-IR18UN-F5 WMP32G insert is engineered for stainless steels (ISO group M), offering controlled chip formation and reduced risk of built‑up edge under thermally demanding conditions. What does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WMP32G grade improves thermal stability and wear resistance, helping the insert maintain a stable cutting edge and a consistent surface finish during prolonged turning operations. How does the IR18UN‑F5 chipbreaker affect machining? The IR18UN‑F5 chipbreaker produces short, manageable chips that evacuate reliably; this reduces manual chip handling, improves surface quality and supports uninterrupted production cycles with the TS16-IR18UN-F5 WMP32G. Is the insert suitable for interrupted cuts or heavy feeds? The WMP32G grade is specified for medium to robust cutting conditions, offering a balance of toughness and wear resistance that makes it appropriate for many interrupted or heavier feed scenarios commonly encountered when machining stainless steels. Can the insert be used with standard toolholders? Yes, the insert is compatible with conventional indexable turning toolholders designed for its geometry and designation, facilitating quick replacement and straightforward integration into existing tool setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for clarification only and do not imply any affiliation between our company and the named brands. The offered article is original, factory‑new goods from the manufacturer Walter Tools.
TS16-IR19W WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the IR19W chipbreaker and the robust WMP32G carbide grade to ensure consistent performance when machining stainless steel; order the insert through Metav Werkzeuge or request tailored advice from our consultants. TS16-IR19W WMP32G Turning indexable insert – Tiger·tec Gold coating, IR19W chipbreaker for stainless steel | Walter Tools The TS16-IR19W WMP32G is an indexable insert engineered for reliable chip control and prolonged service life when machining stainless steel under medium to robust cutting conditions. Tiger·tec Gold coating for long tool life IR19W chipbreaker for controlled chip formation Optimised for stainless steel machining Coated carbide grade WMP32G for robustness Longer tool life through advanced coating technology The principal benefit of the Tiger·tec Gold system is extended tool life under demanding conditions. The multilayer coating reduces flank wear and protects the cutting edge from thermal and mechanical stress, which leads to fewer insert changes and improved uptime on the shop floor. For manufacturers seeking stable productivity, this coating delivers measurable reductions in tool-change frequency and consistent component quality without the need for frequent process adjustments. Consistent chip control for stainless machining Chip formation is critical when working with stainless steel, which tends to be tough and to produce long, stringy chips. The IR19W chipbreaker is designed to promote predictable chip breaking and evacuation, reducing the risk of built-up edge and improving surface finish. Controlled chip flow also lowers the likelihood of machine interruptions and simplifies coolant and swarf management, so turning operations run more smoothly and reliably. Robust carbide grade for repeatable performance The WMP32G grade is a coated carbide formulation tuned for medium to robust cutting tasks in corrosion-resistant and austenitic alloys. Its balanced toughness and wear resistance help maintain a sharp cutting edge during interrupted cuts and variable feeds. By choosing this grade, shops gain a compromise between fracture resistance and abrasion resistance, resulting in steady machining performance and repeatable part quality across production runs. Practical application guidance for stable results This indexable insert is intended for conventional and semi-finishing turning in stainless steel where a combination of edge security and good surface integrity is required. Use holders and clamping systems specified for insert geometry TS16-IR19W and set cutting parameters according to material grade and machine capability; lower feeds and rigid tool setups often improve stability with stainless alloys. For process optimisation and feed/speed recommendations tailored to the machining centre, consult the technical advisors at Metav Werkzeuge. Contact Metav Werkzeuge for application advice and to secure the TS16-IR19W WMP32G; email info@metav-werkzeuge.com or call +49 2822 7131930 for fast, expert support. Technical Data SKU: TS16-IR19W-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-IR19W WMP32G Walter Tools Manufacturer: Walter Tools Facts Material group: M Coating series: Tiger·tec Gold Chipbreaker: IR19W Special features Carbide grade: WMP32G (coated carbide) Application: stainless steel Insert designation: TS16-IR19W WMP32G FAQ What materials is this insert suitable for? The TS16-IR19W WMP32G is designed specifically for stainless steel and for applications where material toughness and heat generation require a stable cutting edge. Which coating is applied to this insert? The insert uses the Tiger·tec Gold coating technology, which enhances wear resistance and extends the service life of the cutting edge. How does the IR19W chipbreaker improve machining? The IR19W chipbreaker promotes controlled chip formation and evacuation, reducing built-up edge and improving surface finish during turning of stainless alloys. Is this grade suitable for interrupted cuts? Yes. The WMP32G coated carbide offers a balance of toughness and wear resistance suitable for medium to robust conditions, including interrupted cuts under appropriate setup. Which insert designation should be ordered for this geometry? Order the insert as TS16-IR19W WMP32G (SKU TS16-IR19W-WMP32G-WALTER) to ensure the specified geometry, chipbreaker and grade are supplied. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation and reference. There is no affiliation between Metav Werkzeuge and the brands named. The offered item is an original, factory-new product of the manufacturer.
TS16-IR2.0ISO WMP22G WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, secure chip control and consistent edge stability for uninterrupted stainless steel turning operations — order the TS16-IR2.0ISO WMP22G indexable turning insert directly via Metav Werkzeuge or consult our specialists for selection advice. TS16-IR2.0ISO WMP22G indexable turning insert by Walter Tools — Tiger·tec Gold for stainless steel The TS16-IR2.0ISO WMP22G is an indexable turning insert engineered to deliver reliable performance when machining stainless steels under medium to robust cutting conditions. Tiger·tec Gold coating for extended tool life WMP22G grade optimised for stainless steel IR2.0ISO chipbreaker for secure chip control Consistent edge stability under robust conditions Faster, more reliable turning of stainless steels The insert is based on the WMP22G grade and the Tiger·tec Gold coating, a combination designed to reduce wear and maintain cutting performance in demanding environments. Coated carbide construction brings thermal resistance and toughness, which means fewer tool changes and longer intervals between regrinds. For machining ISO group M materials — commonly known as stainless steel — this results in more predictable cycle times and reduced downtime. The design supports stable chip formation, which helps to avoid built-up edge and irregular surface finish. Secure chip control and repeatable edge performance Equipped with the IR2.0ISO chipbreaker, the insert provides consistent chip shaping that improves evacuation and reduces the risk of entanglement. The geometrical solution of the chipbreaker, together with the coating, enhances chip control and contributes to edge stability even when conditions become challenging. This promotes process security and allows production planners to rely on repeatable part quality without frequent adjustments. The result is a calmer machining process and fewer scrapped parts. Practical benefits for the workshop and machining process The grade and chip geometry were chosen to balance toughness and wear resistance for medium to robust applications. In practice, this means improved surface integrity on turned components and more efficient material removal rates where stainless steels tend to work-harden. The insert’s characteristics support cost-effective production through extended life and predictable performance metrics. As a component of a coherent tooling strategy, the insert helps to streamline tool inventory and standardise setups across similar turning operations. Discuss the use of this Walter Tools Tiger·tec Gold insert with Metav Werkzeuge to ensure the correct grade and geometry for specific stainless steel applications — Metav Werkzeuge can provide tailored recommendations and quotes via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: TS16-IR2.0ISO-WMP22G-WALTER Designation: TS16-IR2.0ISO WMP22G Product type: indexable turning insert Brand: Walter Tools Facts ISO group: M (stainless steel) Grade: WMP22G Series: Tiger·tec Gold Chipbreaker: IR2.0ISO Special features Coating: Tiger·tec Gold Material: coated carbide Application: stainless steels (ISO M) Intended conditions: medium to robust cutting Benefit: stable chip formation and edge security FAQ What materials is this insert suitable for? The TS16-IR2.0ISO WMP22G insert is designed for machining stainless steel (ISO group M) under medium to robust conditions. How does the Tiger·tec Gold coating help in production? The Tiger·tec Gold coating on the WMP22G grade increases thermal resistance and wear performance, extending tool life and stabilising machining cycles. What advantage does the IR2.0ISO chipbreaker provide? The IR2.0ISO chipbreaker produces consistent chips for reliable evacuation, improving surface quality and reducing the risk of built-up edge during turning. Is this insert suitable for high-feed or finishing operations? The combination of grade and chip geometry suits a range of turning tasks from moderate roughing to finishing where material behaviour requires robust edge control; specific operation suitability depends on cutting parameters. Which brand manufactures this insert and what is the SKU? This indexable turning insert is supplied by Walter Tools and listed under SKU TS16-IR2.0ISO-WMP22G-WALTER. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The item offered is an original, factory-new product of the manufacturer.
TS16-IR2.0ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for secure chip control and long edge life in stainless-steel turning; order directly via Metav Werkzeuge or contact the consultants for application advice. Indexable turning insert TS16-IR2.0ISO WMP32G – Tiger·tec Gold coated carbide for stainless steel, Walter Tools TS16-IR2.0ISO WMP32G is an indexable turning insert engineered for stable cutting in stainless-steel applications and medium to robust machining conditions Tiger·tec Gold coated carbide Optimised for stainless steel (M) Stable chip formation under robust conditions Reliable cutting-edge wear resistance Precision and performance for stainless-steel turning The Tiger·tec Gold grade WMP32G combines a coated carbide substrate with a coating technology that promotes reliable cutting performance when machining stainless steel. The insert’s IR2.0ISO chipbreaker is designed to manage the stringy, tough chips typical of this material group, reducing the risk of built-up edge and helping to maintain a consistent cutting profile. In practice, this means more predictable tool life and fewer interruptions to the production sequence. The construction supports secure chip control during interrupted cuts and higher thermal loads, which are common in turning of stainless alloys. Consistent chip control and extended edge life A stable chip formation strategy is central to productive turning. The combination of the WMP32G grade and the IR2.0ISO geometry enhances fracture-prone chip breaking without aggressive cutting parameters, contributing to lower flank wear and a more reliable cutting edge. The coating reduces adhesion and improves heat resistance, which helps maintain surface finish and dimensional accuracy over longer tool cycles. This results in measurable gains in process stability and a reduction in unscheduled insert changes, supporting more efficient shop-floor operations. Integration into production for dependable results This indexable insert is suitable for a wide range of turning setups where stainless steel is the dominant workpiece material. Its design supports repeatable performance in both single-operation and multi-shift environments, making it a practical choice for productivity-focused workshops. Specification details such as the ISO-compatible designation and the grade identification facilitate straightforward tool selection and inventory management. The insert’s features are geared towards operators and engineering managers seeking a balance between performance and predictable tool life in demanding turning applications. Contact Metav Werkzeuge to discuss how the Walter Tools TS16-IR2.0ISO WMP32G Tiger·tec Gold insert can be integrated into current machining processes or to request application-specific recommendations from our consultants at Metav Werkzeuge (info@metav-werkzeuge.com / +49 2822 7131930) Technical data Article number: TS16-IR2.0ISO-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-IR2.0ISO WMP32G Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Grade: WMP32G Series/coating: Tiger·tec Gold Chipbreaker: IR2.0ISO Material group: M (stainless steel) SKU / UID: TS16-IR2.0ISO-WMP32G-WALTER Facts Material group designation: M Suitable for stainless steel: Yes Coating technology: Tiger·tec Gold Chipbreaker designation: IR2.0ISO Special features Coated carbide grade WMP32G Optimised for medium to robust machining conditions Designed for stable chip formation with stainless steels ISO-compatible designation for straightforward tool selection FAQ What materials is this insert suitable for? The TS16-IR2.0ISO WMP32G is optimised for stainless steel (ISO group M) and performs well under medium to robust machining conditions. What does the Tiger·tec Gold technology provide? Tiger·tec Gold on the WMP32G grade offers enhanced heat resistance and reduced adhesion, helping the insert maintain cutting-edge integrity and surface quality in stainless-steel turning. How does the IR2.0ISO chipbreaker affect machining? The IR2.0ISO chipbreaker on this insert promotes controlled chip formation for tough, stringy materials, reducing built-up edge and improving process stability with the WMP32G grade. Is the insert compatible with ISO toolholders and systems? Yes, the TS16-IR2.0ISO WMP32G carries an ISO-compatible designation, facilitating integration into standard indexable turning tool systems. What production benefits can be expected from using this grade? Using the WMP32G grade with Tiger·tec Gold coating typically yields improved cutting-edge life and more consistent process results in stainless-steel turning, supporting higher uptime and predictable tool-change intervals. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Mentions of brand names such as Walter Tools serve explanatory purposes only. There is no affiliation between Metav Werkzeuge and the mentioned manufacturers; the offered item is an original, factory-new product of the stated manufacturer.
TS16-IR2.0ISO-2 WMP32G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold WMP32G grade and the IR2.0ISO‑2 chipbreaker for consistent chip control and extended cutting-edge life when machining stainless steels; this combination reduces downtime and improves process reliability. Order directly via Metav Werkzeuge or contact the consultants for tailored advice. TS16-IR2.0ISO-2 WMP32G — Indexable turning insert by Walter Tools (for stainless steel) The TS16-IR2.0ISO-2 WMP32G is an indexable turning insert engineered for turning operations in stainless steel, delivering stable chip formation under medium to robust cutting conditions. Tiger‑tec Gold coated grade WMP32G Optimised IR2.0ISO‑2 chip control Designed for stainless steel machining Stable cutting edge and long tool life Reliable chip control for fewer interruptions The combination of the IR2.0ISO‑2 chipbreaker and the Tiger‑tec Gold grade delivers controlled chip formation, which directly reduces machine stops for chip clearing. Stable chips lower the risk of built‑up edge and surface blemishes, while the coated carbide composition supports consistent cutting behaviour across varying feeds and depths. This results in a measurable increase in process uptime and fewer rework cycles. Coating technology that extends service life The WMP32G grade, utilising Tiger‑tec Gold coating technology, is a coated carbide solution optimised for the thermal and mechanical challenges of stainless steel. The coating improves wear resistance and maintains a protected cutting edge at elevated temperatures. For manufacturers, this translates into a lower cost per component through longer tool life and more predictable change intervals. Consistent performance in medium to robust conditions Designed for medium to robust cutting scenarios, the insert supports stable machining where workpiece toughness and heat build‑up are typical concerns. The geometry of the insert—paired with the chipbreaker—promotes secure chip flow and reduces the likelihood of surface defects. The predictable nature of the grade and chip control allows process engineers to standardise parameters and achieve repeatable results. Practical benefits for workshop productivity Adopting this grade and chipbreaker combination improves overall productivity by reducing unscheduled interruptions and simplifying tool selection for stainless steel tasks. The insert’s properties support a wide range of turning applications, enabling straightforward integration into existing tool programmes and shorter setup times. Improved tool life and consistent surface finishes contribute to more efficient downstream operations. Contact Metav Werkzeuge for a process consultation on Walter Tools Tiger‑tec Gold inserts and find the right TS16‑IR2.0ISO‑2 WMP32G solution for your stainless steel applications — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TS16-IR2.0ISO-2-WMP32G-WALTER Designation: TS16-IR2.0ISO-2 WMP32G Product type: Indexable turning insert (Drehwendeschneidplatte) Brand: Walter Tools Series: Tiger‑tec Gold Grade: WMP32G Chipbreaker: IR2.0ISO‑2 Applicable material group: M (stainless steels) Core specifications Material composition: coated carbide Intended application: turning of stainless steel Performance: stable chip formation, extended edge life Cutting conditions: medium to robust machining Applications and features Coating technology: Tiger‑tec Gold Wear resistance and thermal protection Optimised chip control for improved surface quality Suitable for varied turning tasks in stainless steels FAQ What materials is this insert designed for? The TS16-IR2.0ISO-2 WMP32G is optimised for stainless steel (material group M) and performs well under medium to robust turning conditions. How does the IR2.0ISO‑2 chipbreaker help in production? The IR2.0ISO‑2 chipbreaker promotes controlled chip formation with the WMP32G grade, reducing interruptions for chip removal and improving surface finish consistency. Is the WMP32G grade coated and what is the benefit? Yes — WMP32G is a coated carbide grade within the Tiger‑tec Gold family; the coating enhances wear resistance and thermal stability during stainless steel turning. Can the insert be used for light finishing operations? While optimised for medium to robust conditions, the insert’s chip control and coating can also support finishing passes where process parameters are adjusted accordingly. Which manufacturer produced this insert and what is the SKU? This indexable insert is from Walter Tools and is listed under SKU TS16-IR2.0ISO-2-WMP32G-WALTER. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Walter Tools is mentioned for identification and explanatory purposes; there is no affiliation between our company and the trademark holders. The offered article is an original, factory‑new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com