TS16-IR2.0ISO-F5 WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WMP32G grade for dependable machining of rostfreier Stahl; the IR2.0ISO‑F5 chipbreaker ensures stable chip formation and reduced rework. Order directly via Metav Werkzeuge or consult the team for application-specific advice. TS16-IR2.0ISO-F5 WMP32G turning insert – Tiger·tec Gold coating, for rostfreier Stahl (Walter Tools) The TS16-IR2.0ISO-F5 WMP32G is a coated carbide turning insert engineered for robust performance when machining rostfreier Stahl; it combines a Tiger·tec Gold cutting-material technology with a dedicated chipbreaker geometry for controlled chip flow in medium to heavy-duty turning applications. Tiger·tec Gold coating for high thermal stability WMP32G grade for machining rostfreier Stahl IR2.0ISO‑F5 chipbreaker for stable chip control Maximise process reliability with heat-resistant coating and grade The combination of Tiger·tec Gold technology and the WMP32G cutting grade provides a consistent, heat-resistant cutting zone that supports predictable performance in demanding rostfreier Stahl operations. As a coated carbide insert, it is designed to reduce the risk of build‑up edge and to maintain a stable cutting edge under increased thermal load, which translates into fewer interruptions and more consistent part quality. This makes the insert particularly suitable where temperature control and repeatable surface finish are critical. Secure chip control reduces downtime and secondary operations The dedicated IR2.0ISO‑F5 chipbreaker geometry controls chip formation and evacuation, lowering the likelihood of chip entanglement and toolholder interference. Good chip control improves operator safety and reduces the need for manual post‑process handling or additional cleaning steps. For production environments that prioritise cycle stability, this insert helps to limit unexpected stops and supports a steady production flow by simplifying chip management in rostfreier Stahl turning. Improve productivity through predictable tool life and reproducible results Applying a grade engineered for rostfreie applications ensures a balance between wear resistance and toughness. The result is a turning insert that supports longer intervals between indexings and enables consistent surface quality across batches. Reliable edge behaviour decreases scrap rates and contributes to a favourable cost-per-part equation in serial manufacture. For shops aiming to increase throughput without compromising tolerances, the predictable wear characteristics of this insert support higher overall equipment effectiveness. Straightforward integration into standard turning workflows The ISO‑based designation and chipbreaker format allow the insert to be used in common turning toolholders, facilitating fast changeovers and straightforward inventory management. Its design is focused on maintaining process stability rather than requiring specialised fixtures; this reduces setup complexity and supports reproducible mounting and indexing. When the aim is dependable performance in rostfreier Stahl turning, the insert offers a practical pathway to reduced process variability and clearer production planning. Contact Metav Werkzeuge for application-specific recommendations and to arrange supply of Walter Tools inserts featuring Tiger·tec Gold for reliable rostfreier Stahl turning – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TS16-IR2.0ISO-F5-WMP32G-WALTER Product type: Turning insert (indexable insert) Designation: TS16-IR2.0ISO-F5 WMP32G Manufacturer: Walter Tools Series: Tiger·tec Gold Core data Grade: WMP32G Chipbreaker: IR2.0ISO‑F5 Material group: M (rostfreier Stahl) ISO designation included: TS16-IR2.0ISO-F5 Special features Coating technology: Tiger·tec Gold Substrate: coated carbide (beschichtetes Hartmetall) Application: medium to robust machining conditions for rostfreier Stahl Benefits: stable chip formation, secure cutting edge, improved process reliability FAQ What materials is this insert designed for? The TS16-IR2.0ISO-F5 WMP32G is designed primarily for rostfreier Stahl (material group M) and is optimised for middling to robust machining conditions. How does the Tiger·tec Gold coating help performance? The Tiger·tec Gold coating increases thermal stability and wear resistance of the cutting zone on the WMP32G grade, supporting longer tool life and consistent surface finish when turning rostfreier Stahl. What advantage does the IR2.0ISO‑F5 chipbreaker provide? The IR2.0ISO‑F5 chipbreaker improves chip control and evacuation, reducing the risk of chip tangling and minimising downtime associated with chip-related issues during turning. Is the insert suitable for high‑speed machining? The combination of the coating and grade provides enhanced thermal resistance, which supports higher cutting temperatures; suitability for high‑speed operations depends on specific cutting parameters and machine capability. Can this insert be used in standard ISO toolholders? Yes, the ISO‑based designation allows integration into commonly used indexable turning toolholders, simplifying replacement and inventory management. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-IR2.0ISO-M5 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and the WMP32G grade for predictable tool life and stable chip control when machining rostfreien Stahl; order the insert directly via Metav Werkzeuge or request application advice from our consultants. TS16-IR2.0ISO-M5 WMP32G Turning Insert — Walter Tools, Tiger·tec Gold, chipbreaker IR2.0ISO-M5 TS16-IR2.0ISO-M5 WMP32G is a carbide indexable insert designed for robust turning of rostfreien Stahl under medium to heavy cutting conditions Tiger·tec Gold coating technology Optimised for rostfreie Stähle (ISO M) Stable chip formation for medium to heavy cuts Consistent cutting-edge life and process security Higher productivity through predictable wear resistance The combination of the Tiger·tec Gold coating with the WMP32G grade provides a balance between wear resistance and toughness that supports longer tool life during continuous turning operations. For materials in the ISO M category (rostfreien Stahl), which typically generate heat and tend to work-harden, this insert maintains a stable cutting edge and reduces unexpected edge failures. The result is fewer tool changes, less machine downtime and improved overall throughput — a measurable efficiency gain for repetitive production tasks. Improved chip control and safer machining The integrated IR2.0ISO-M5 chipbreaker is designed to produce short, controllable chips when machining demanding stainless grades. By breaking chips reliably, the insert reduces the risk of entanglement and protects both the workpiece surface and the toolholder. This is particularly important when process stability is required for batch production or long cycle times; the chipbreaker supports consistent surface finish and predictable cutting forces, helping to safeguard cycle time and product quality. Easy integration into existing turning systems With the ISO designation TS16-IR2.0ISO-M5, the insert fits standard toolholder geometries for indexable turning applications and can be used where a robust, coated carbide grade is required. The designation clarifies compatibility and simplifies tooling decisions in the workshop: indexable turning insert formats that match this ISO code will accept the insert without bespoke adapters. This reduces setup complexity and shortens preparation time for machining rostfreien Stahl parts. Application focus and recommended approach This insert is intended for medium to robust cutting conditions on rostfreie Stähle where a combination of edge stability and wear resistance is required. For best results, use conservative initial feeds and speeds suited to the workpiece grade, then adjust to steady-state cutting based on observed temperatures and surface finish. The design supports both roughing and semi-finishing passes where consistent material removal and predictable tool life contribute to process reliability. Contact Metav Werkzeuge for tailored application advice on the Walter Tools TS16-IR2.0ISO-M5 WMP32G insert or to arrange supply via Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TS16-IR2.0ISO-M5-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-IR2.0ISO-M5 WMP32G Walter Tools Manufacturer: Walter Tools Core Data Grade designation: WMP32G Material group: M (rostfreie Stähle) ISO designation: TS16-IR2.0ISO-M5 WMP32G Special features Series: Tiger·tec Gold Chipbreaker: IR2.0ISO-M5 Application: Medium to robust machining of rostfreien Stahl Coated cemented carbide grade for enhanced edge stability FAQ What materials is this insert designed for? The TS16-IR2.0ISO-M5 WMP32G insert is formulated for rostfreie Stähle (ISO material group M), providing stable cutting performance on stainless grades. How does the IR2.0ISO-M5 chipbreaker benefit production? The IR2.0ISO-M5 chipbreaker produces short, consistent chips to improve process security, reduce entanglement and support a reliable surface finish during medium to heavy turning. Is the insert suitable for finishing passes? Yes, the coated WMP32G grade offers a balance of toughness and wear resistance that can be used for semi-finishing and finishing in many rostfreien Stahl applications, depending on cutting parameters. Which series does this grade belong to and what does that mean? The grade belongs to the Tiger·tec Gold series; this coating technology is engineered to extend tool life and maintain edge integrity under demanding stainless steel conditions. Can this insert be used in standard ISO toolholders? The ISO code TS16-IR2.0ISO-M5 indicates compatibility with standard indexable turning toolholders that accept this insert geometry and designation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-IR2.0TR WMP32G WMP32G Wendeplatten - Walter Tools
Combining the WMP32G coated grade with the IR2.0TR chipbreaker gives dependable chip control and improved wear resistance for stainless-steel turning; benefit from the Tiger·tec Gold technology for longer tool life and stable cutting edges — order the insert directly via Metav Werkzeuge or consult our specialists for application support. TS16-IR2.0TR WMP32G indexable turning insert – Tiger·tec Gold (Walter Tools) The TS16-IR2.0TR WMP32G is an indexable turning insert engineered for stainless-steel machining in medium to robust conditions, combining a modern coating system with a chipbreaker tuned for secure chip evacuation. Tiger·tec Gold coating for long tool life Optimised for stainless steel machining Stable chip formation in robust conditions Benefit from a modern coating for durable performance The Tiger·tec Gold technology delivers a coated carbide solution that focuses on wear resistance and edge stability, which directly supports consistent component quality in high-demand production. By reducing flank wear and maintaining a sharper cutting geometry for longer, the insert helps to maintain cycle times and minimise unexpected tool changes. The result is a measurable improvement in productivity and fewer interruptions to machining sequences, making process planning more predictable. Controlled chip formation for stainless-steel turning Stainless steels are prone to work-hardening and built-up edge; the IR2.0TR chipbreaker is designed to create short, controllable chips under the higher heat and ductility typical of this material group. Controlled chips lower the risk of surface imperfections and help to protect both tool and workpiece. The WMP32G grade supports secure chip flow and provides improved machining behaviour in those medium to robust cutting conditions where stability is crucial. Predictable tool life and integration into tooling systems As an indexable insert, the TS16-IR2.0TR WMP32G allows quick indexation and re-use of the insert body, reducing downtime and tooling costs compared with brazed or disposable solutions. The standard ISO-style designation simplifies selection for compatible toolholders and indexable tool systems. The combination of Tiger·tec Gold coating and the engineered chipbreaker contributes to repeatable lifetimes, enabling planners to better estimate replacement intervals and total-cost-of-ownership. Practical advantages for production and process security In series production, a stable cutting edge and reliable chip control translate into consistent surface finish and fewer rejects. The insert’s geometry and grade are tuned to address the challenges of machining stainless steels — toughness, heat generation and tendency to build up on the edge — so operators gain improved process reliability and reduced trimming or rework. For specialised applications, technical consultation can clarify best-cutting parameters and holder recommendations to maximise tool performance. For application advice or to discuss tool selection for stainless-steel turning with the TS16-IR2.0TR WMP32G, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by telephone at +49 2822 7131930 — our team will support specification and supply. Technical data SKU: TS16-IR2.0TR-WMP32G-WALTER Product type: Indexable turning insert Designation: TS16-IR2.0TR WMP32G Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR2.0TR Material group: M (stainless steel) Manufacturer: Walter Tools Facts No numerical specifications provided in the data set Special features Coated carbide grade Optimised for stainless-steel machining Stable chip formation Suited to medium to robust cutting conditions Tiger·tec Gold coating technology FAQ What materials is this insert suitable for? The TS16-IR2.0TR WMP32G insert is intended primarily for stainless steel machining (material group M) and is formulated to manage the toughness and heat characteristics of those alloys. What does the grade WMP32G indicate? WMP32G is Walter’s coated carbide grade within the Tiger·tec Gold family, optimised for balanced wear resistance and edge stability in demanding stainless-steel turning. How does the IR2.0TR chipbreaker help in production? The IR2.0TR chipbreaker promotes controlled, short chips that improve evacuation and reduce the risk of built-up edge, supporting consistent surface finish and process security when turning stainless steels. Is the insert compatible with standard indexable holders? The ISO-style designation TS16-IR2.0TR WMP32G aligns with common indexable insert systems; compatibility should be confirmed against the toolholder seat and clamping specifications. Can the TS16-IR2.0TR WMP32G improve overall tool costs? By extending effective tool life through improved wear resistance and reducing unplanned tool changes, the grade and chipbreaker contribute to lower tooling-related downtime and predictable replacement cycles. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product designations are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
TS16-IR2.5ISO WMP22G WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP22G cemented-carbide grade and the IR2.5ISO chipbreaker for reliable machining of stainless steel; order genuine Walter Tools inserts through Metav Werkzeuge or consult their specialists for process optimisation. TS16-IR2.5ISO WMP22G indexable insert by Walter Tools — Tiger·tec Gold, for stainless steel TS16-IR2.5ISO WMP22G is an indexable turning insert designed for secure chip control and high process reliability in the machining of stainless steels Tiger·tec Gold coating for long tool life IR2.5ISO chipbreaker for stable chip control Suited for stainless steel machining (ISO M) Coated cemented-carbide grade WMP22G Consistent chip control enhances process reliability The insert combines the IR2.5ISO chipbreaker with the WMP22G cemented-carbide grade to support stable chip formation when machining stainless steels. Stainless materials tend to cling and produce built-up edge; the geometry and chip control of this insert reduce those risks, which in turn lowers the probability of unexpected downtime. The Tiger·tec Gold coating improves wear resistance and contributes to consistent cutting behaviour under medium to robust cutting conditions. Improved surface quality and extended cutting intervals A robust grade and advanced coating translate into fewer interruptions for tool changes and a steadier surface finish on the workpiece. The coated cemented-carbide composition resists thermal softening and flank wear, helping to maintain a sharp cutting edge over longer cycles. This insert therefore supports a favourable cost-in-use ratio by combining durability with predictable performance, especially in series production where repeatability matters. Clear suitability for stainless steel applications Marked by the material group M, the design and grade target the typical challenges of stainless steel: high ductility, heat generation and the tendency for smearing. The combination of geometry and coating encourages secure chip evacuation and reduces the risk of built-up edge, which benefits part tolerances and reduces rework. For workshop planners and process engineers, the insert is a practical choice where reliable finishing and intermediate turning of stainless components are required. Application guidance and process alignment For best results, pair the insert with tooling and feeds optimised for stainless processing; stable clamping and controlled depth of cut will further enhance flank life and surface consistency. If process adjustments are needed, Metav Werkzeuge can provide application-oriented advice and recommend suitable holders and cutting conditions to match production goals. The overall design supports a productive machining strategy without sacrificing component quality. Contact Metav Werkzeuge to discuss application specifics and secure genuine Walter Tools Tiger·tec Gold indexable inserts tailored to stainless steel machining requirements Technical Data SKU: TS16-IR2.5ISO-WMP22G-WALTER Designation: TS16-IR2.5ISO WMP22G Product type: Drehwendeschneidplatte Brand: Walter Tools Facts Grade: WMP22G Series: Tiger·tec Gold Chipbreaker: IR2.5ISO Material group: M (stainless steel) Special features Coated cemented carbide Suitable for stainless steel machining Stable chip formation and edge reliability FAQ What materials is this insert intended for? The insert is intended for stainless steel applications (material group M); the WMP22G grade and IR2.5ISO chipbreaker are optimised for these materials. How does the Tiger·tec Gold series benefit machining performance? The Tiger·tec Gold coating improves wear resistance and thermal stability, which extends cutting intervals and contributes to consistent part quality when using the TS16-IR2.5ISO WMP22G insert. Is the insert suitable for heavy-duty turning or finishing passes? The insert is specified for medium to robust conditions on stainless steel; its geometry and grade support both stable roughing and reliable finishing under appropriate parameters. Which feature reduces the risk of built-up edge during turning? The IR2.5ISO chipbreaker combined with the coated grade promotes secure chip evacuation and reduces the tendency for built-up edge on stainless steel workpieces. Can this insert be used for high-temperature cutting applications? The coated cemented-carbide construction of the TS16-IR2.5ISO WMP22G supports thermal resistance in stainless steel machining, helping to maintain edge stability under elevated cutting temperatures. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mention of brand names such as Walter Tools is for explanation only; there is no affiliation or partnership implied. The offered article is an original, factory-new product of the manufacturer.
TS16-IR2.5ISO WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the IR2.5ISO chipbreaker to achieve reliable chip control and extended tool life in rostfreie Stahl turning applications; order directly via Metav Werkzeuge or consult our specialists for tailored recommendations. TS16-IR2.5ISO WMP32G — indexable turning insert with Tiger·tec Gold coating by Walter Tools TS16-IR2.5ISO WMP32G is an indexable turning insert designed for medium to robust machining of rostfreie Stähle (ISO M) where stable chip formation and edge security are required Tiger·tec Gold coated carbide for high wear resistance Optimised chip control IR2.5ISO geometry Designed for rostfreie Stähle (ISO M) machining Reliable edge stability for medium to tough conditions Increased process reliability for rostfreie Stahl turning The combination of the Tiger·tec Gold coating and the WMP32G grade provides a wear‑resistant, coated carbide surface that supports consistent performance under demanding conditions. The IR2.5ISO chipbreaker geometry promotes controlled chip formation, which reduces the occurrence of built‑up edge and heat concentration—common challenges when machining rostfreie Stähle. This results in fewer unplanned tool changes and a more predictable production rhythm, improving overall machining throughput. The insert, listed as an indexable turning insert in Walter Tools’ Tiger‑tec Gold range, is developed for secure edge retention and repeatable performance on medium to tough stainless steel workpieces. Longer tool life with consistent surface finish A robust grade like WMP32G reduces flank wear and maintains cutting edge integrity over longer tool engagements. Thanks to the coating technology, oxidation and crater wear are mitigated, so component surface quality is preserved across longer runs. For production environments where component tolerances and surface finish matter, the improved wear resistance translates directly into fewer setups and lower tool consumption. The insert’s geometry and coating together enable efficient heat dispersion and edge stability, which in turn supports reliable dimensional consistency and reduces the need for manual rework. Practical use and integration into machining processes The insert is suitable for through‑hardening turning sequences and mixed production batches where rostfreie Stähle are frequently processed. The IR2.5ISO chipbreaker assists in creating short, controlled chips suitable for many turning centres and automated chip‑handling setups. When integrating this insert, toolholders that accept the TS16‑style designation will be compatible; selection of cutting parameters should be aligned with the machine’s rigidity and coolant strategy to exploit the Tiger·tec Gold benefits fully. For shops without specialist data, Metav Werkzeuge can provide guidance on parameter windows and holder recommendations to ensure efficient implementation with minimum setup time. Contact Metav Werkzeuge to discuss the TS16‑IR2.5ISO WMP32G insert and receive tailored advice for rostfreie Stahl applications — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TS16-IR2.5ISO-WMP32G-WALTER Product type: Indexable turning insert Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR2.5ISO Material group: M (rostfreie Stähle) Manufacturer: Walter Tools Identifier: TS16-IR2.5ISO WMP32G Facts SKU: TS16-IR2.5ISO-WMP32G-WALTER ISO designation: TS16-IR2.5ISO WMP32G Applicable material standard: ISO M Special features Coating: Tiger·tec Gold (coated carbide) Application: Medium to robust rostfreie Stahl machining Benefits: Improved chip control, enhanced edge stability, extended tool life FAQ What materials is this insert best suited for? The TS16-IR2.5ISO WMP32G insert is designed for rostfreie Stähle (ISO M) and performs well under medium to robust stainless steel turning conditions. How does the IR2.5ISO chipbreaker affect machining? The IR2.5ISO geometry promotes controlled, short chip formation and reduces built‑up edge when turning rostfreie Stähle, supporting consistent surface finish and easier chip handling. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WMP32G grade enhances wear resistance and heat management, which extends cutting life and maintains edge integrity during longer runs. Can this insert be used for finishing operations? Yes, when employed with appropriate holders and cutting parameters, the insert supports consistent surface quality and can be applied for finishing steps on rostfreie Stahl components. Is the TS16-IR2.5ISO available in different grades or geometries? This listing covers the WMP32G grade with IR2.5ISO chipbreaker; Walter Tools’ Tiger·tec Gold range includes various grades and geometries suited to different applications and material conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-IR2.5ISO-F5 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold surface engineering and the WMP32G coated carbide grade for secure chip formation and prolonged edge life in stainless applications; order directly via Metav Werkzeuge or request application advice from our consultants. TS16-IR2.5ISO-F5 WMP32G indexable turning insert — Walter Tools, Tiger·tec Gold coating, for rostfreier Stahl TS16-IR2.5ISO-F5 WMP32G is an indexable turning insert designed for robust performance in the machining of rostfreier Stahl and similar demanding materials. Tiger·tec Gold coating for long tool life WMP32G coated carbide grade for rostfreier Stahl Stable chip formation under medium to heavy cuts Consistent edge stability for productive turning Higher throughput through advanced coating technology The combination of the Tiger·tec Gold technology and a coated carbide substrate yields measurable improvements in process stability and lifetime. The coating reduces adhesive wear and improves thermal resistance, which directly supports longer cutting intervals and fewer tool changes — a clear efficiency gain in series production. As a result, shops experience reduced downtime and a better cost-per-cut ratio when machining rostfreier Stahl and other materials that tend to work-harden or form built-up edge. The material classification WMP32G denotes a composition optimised for such conditions, providing reliable, repeatable performance under medium to robust cutting parameters. Reliable chip control for predictable results The integrated chipbreaker IR2.5ISO-F5 is tuned to promote stable chip formation during turning operations. Stable chips reduce the risk of surface defects and machine interruptions, which is particularly valuable when facing the heat generation and ductility typical of rostfreier Stahl. By guiding chips away from the cutting zone and supporting consistent shear conditions, the chipbreaker contributes to improved surface finish and reproducible component quality. This technical tuning translates into fewer secondary operations and higher first-pass yield, supporting throughput and customer satisfaction. Practical integration and application support for production environments The insert is part of the Tiger‑tec Gold series and is suitable for medium to heavy-duty turning in rostfreier Stahl, offering predictable wear behaviour and long flank life. For production planners and process engineers, this means easier tool life estimation and cycle time planning. If further parameter optimisation is required, Metav Werkzeuge can provide cutting data recommendations and practical advice to align spindle speed, feed and depth of cut with the insert’s strengths. The combination of a robust chipformer and a modern coated grade supports a stable process window, reducing the need for constant adjustments on the shop floor. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts or to request a machining recommendation by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: TS16-IR2.5ISO-F5-WMP32G-WALTER Article name: Drehwendeschneidplatte TS16-IR2.5ISO-F5 WMP32G Walter Tools Grade: WMP32G Facts Series: Tiger·tec Gold Chipbreaker: IR2.5ISO-F5 Material group: M (rostfreie Stähle) Suitability: rostfreier Stahl Special features Coated carbide construction Optimised for stable chip formation Designed for medium to robust operating conditions Consistent edge stability for productive turning FAQ What materials is this insert intended for? The TS16-IR2.5ISO-F5 WMP32G turning insert is designed primarily for rostfreier Stahl and performs well under the medium to robust cutting conditions common with these materials. How does the Tiger·tec Gold technology improve performance? Tiger·tec Gold coating on the WMP32G grade enhances thermal resistance and wear protection, extending tool life and supporting more consistent cutting results with the TS16-IR2.5ISO-F5 insert. Is the IR2.5ISO-F5 chipbreaker suitable for heavy cuts? The IR2.5ISO-F5 chipbreaker on this insert is tuned for stable chip control in medium to heavy turning, helping to avoid built-up edge and improve surface finish during robust operations. Can Metav Werkzeuge provide cutting data for this insert? Yes, Metav Werkzeuge can supply recommended cutting parameters and application guidance to match the TS16-IR2.5ISO-F5 WMP32G insert to specific workpiece materials and machine setups. Which product family does this insert belong to? This insert is part of the Tiger·tec Gold series and uses the WMP32G coated carbide grade for enhanced process reliability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TS16-IR2.5ISO-M5 WMP32G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WMP32G carbide grade to achieve stable chip formation and extended tool life when machining rostfreier Stahl; the result is improved process reliability and fewer unplanned tool changes. Order the insert directly via Metav Werkzeuge or consult our technical team for application-specific advice. TS16-IR2.5ISO-M5 WMP32G – Indexable turning insert for rostfreier Stahl (Walter Tools) A TS16-IR2.5ISO-M5 WMP32G indexable insert engineered to provide dependable performance in medium to robust turning operations on rostfreier Stahl, combining a specialised chipbreaker with a high-performance coating for consistent results Tiger·tec Gold coating for extended tool life Optimised chip control for rostfreier Stahl machining Coated carbide grade WMP32G for robust conditions Walter Tools quality for edge stability Higher productivity through consistent chip control and wear resistance The insert uses the WMP32G grade together with the Tiger·tec Gold coating to reduce flank wear and maintain cutting-edge integrity under challenging conditions. This combination supports stable chip formation, which lowers the risk of built-up edge and unplanned interruptions. In practice, that means longer tool life and fewer index changes, translating into reduced tool consumption and more predictable cycle times in series production on rostfreier Stahl. Better surface finish with a purpose-designed chipbreaker The integrated chipbreaker IR2.5ISO-M5 is optimised for the typical behaviours of rostfreier Stahl — toughness, adhesiveness and heat generation. By promoting short, controlled chips and reliable evacuation, the geometry helps prevent surface damage and improves repeatability. Explaining the term: a chipbreaker shapes and fractures the chip to avoid long, entangling swarf and to protect the cutting edge, enabling a smoother finish and less manual rework. Seamless fit into production workflows and tooling systems Designed for standard turning toolholders, the insert supports fast indexing and predictable tool-set management. The coated cemented carbide construction provides a balance between hardness and toughness suited to moderate-to-robust cutting parameters, helping maintain edge stability and consistent process outputs. For workshops seeking measurable improvements, this insert offers a practical step toward enhanced throughput while keeping setup and handling straightforward. For machining rostfreier Stahl with a focus on repeatability and tool life, choose Walter Tools' Tiger·tec Gold grade and contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS16-IR2.5ISO-M5-WMP32G-WALTER Designation: TS16-IR2.5ISO-M5 WMP32G Product type: Indexable insert for turning Manufacturer: Walter Tools Core data Material group: M Suitable for: rostfreier Stahl Grade: WMP32G Special features Coating technology: Tiger·tec Gold Chipbreaker: IR2.5ISO-M5 Coated carbide material Application: medium to robust cutting conditions FAQ What materials is this insert intended for? The TS16-IR2.5ISO-M5 WMP32G insert is specified for machining rostfreier Stahl and is formulated to handle the toughness and thermal behaviour of these alloys. How does the Tiger·tec Gold coating benefit operations? The Tiger·tec Gold coating on this Walter Tools grade increases wear resistance and reduces flank wear, contributing to longer tool life and more consistent component quality. What is the role of the IR2.5ISO-M5 chipbreaker? The IR2.5ISO-M5 chipbreaker is designed to produce short, manageable chips and to stabilise the cutting process, which reduces built-up edge and improves surface finish. Is this insert suitable for heavy roughing passes? The WMP32G grade is aimed at medium to robust conditions; for heavy roughing, the insert provides robustness and edge stability, though cutting data should be matched to machine and workpiece specifics. Which toolholders are compatible with this insert format? The insert fits standard turning toolholder systems that accept its designation; check the toolholder’s compatibility with the TS16-IR2.5ISO-M5 form and seat geometry. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanation. There is no affiliation between our company and the listed brands. The offered article is original, factory-new goods from the manufacturer Walter Tools.
TS16-IR20UN WMP22G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the IR20UN chipformer for stable performance when machining rostfreier Stahl; the combination of durable coating and optimised chip control supports predictable tool life and process reliability. Order the TS16-IR20UN WMP22G indexable insert directly via Metav Werkzeuge or ask our consultants if needed. TS16-IR20UN WMP22G Drehwendeschneidplatte – Tiger·tec Gold coating, for rostfreier Stahl | Walter Tools The TS16-IR20UN WMP22G is a coated carbide indexable insert engineered for secure chip formation and repeatable edge stability in medium to robust machining of rostfreier Stahl. Tiger·tec Gold coating for extended tool life Optimised IR20UN chipformer for stable chips Suited to rostfreier Stahl machining Reliable edge stability at elevated temperatures Improved productivity through reliable coating and chip control The combination of the Tiger·tec Gold coating and the WMP22G grade delivers a measurable increase in process stability for machining rostfreier Stahl. The coating system reduces flank wear and supports consistent cutting-edge performance under thermal load, which translates into longer intervals between index changes and fewer unplanned stops. For production environments this means a lower risk of scrap and a more predictable machining cycle. The term coated carbide refers to a hard substrate with a thin engineered layer that increases resistance to abrasion and adhesion; this technology is central to the insert’s economy and repeatability. Precise chip formation and secure cutting behaviour for stainless applications The IR20UN chipformer is designed to produce controlled chips when working with tough, ductile alloys. Stable chip geometry reduces built-up edge and improves surface finish, while also lowering the chance of chip-related interruptions. Controlled chips are especially important in rostfreier Stahl where material toughness and heat generation can otherwise result in stringy or welded chips. The insert’s geometry helps maintain a consistent shear zone, enabling higher feed rates without compromising component quality. This results in more efficient cycles and less rework. Practical selection and compatibility in mixed production As a member of the Tiger·tec Gold series, this insert matches well with a range of holders and tool systems commonly used on turning centres. The WMP22G grade is tailored for medium to robust conditions on rostfreier Stahl, offering a balance between wear resistance and edge toughness. When planning tooling layouts or replacing inserts during a changeover, the grade’s predictable behaviour simplifies parameter setting and reduces trial time. For shops consolidating grades, the combination of coating technology and chipformer supports consistent results across batch sizes and part geometries. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and to secure fast delivery — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS16-IR20UN-WMP22G-WALTER Designation: TS16-IR20UN WMP22G Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts No core numerical specifications provided Special features Series: Tiger·tec Gold Grade: WMP22G (coated carbide) Chipformer: IR20UN Material group: M (rostfreie Stähle) Intended use: medium to robust conditions on rostfreie Stähle ISO designation: TS16-IR20UN WMP22G FAQ What materials is this insert intended for? The TS16-IR20UN WMP22G insert is designed primarily for machining rostfreier Stahl, indicated by the material group M. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WMP22G grade increases resistance to abrasion and thermal stress, which helps maintain cutting-edge integrity and extends productive tool life. Which chipformer is used and why is it important? The IR20UN chipformer is specified to produce stable, controllable chips when machining tough, ductile materials such as rostfreier Stahl, reducing built-up edge and improving surface quality. Is this insert suitable for high-temperature cutting conditions? The combination of WMP22G grade and Tiger·tec Gold coating provides improved performance under elevated temperatures commonly encountered when machining rostfreier Stahl. Can this insert be used with standard turning holders? Yes, the TS16-IR20UN WMP22G is compatible with common indexable-insert turning holders; ensure the holder matches the TS16 interface and clamping requirements. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-IR20UN WMP32G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WMP32G grade for reliable performance when machining stainless steel; the IR20UN chipbreaker secures stable chip formation and consistent surface finish. Order the insert directly via Metav Werkzeuge or consult our technical advisers for process optimisation. TS16-IR20UN WMP32G Drehwendeschneidplatte — indexable turning insert, Tiger·tec Gold for stainless steel (M) — Walter Tools The TS16-IR20UN WMP32G is an indexable turning insert tailored for machining stainless steel, combining a coated carbide grade with a chipbreaker designed to promote dependable chip control under medium to robust conditions. Tiger·tec Gold coating for stainless steel WMP32G grade for medium to robust conditions IR20UN chipbreaker for stable chip formation Walter Tools original indexable insert Increased productivity through optimised coating and grade The combination of the Tiger·tec Gold coating and the WMP32G grade delivers enhanced tool life and repeatable performance when machining stainless steel. The coating reduces wear at elevated temperatures and supports a stable cutting edge, which in turn helps maintain dimensional accuracy over longer tool life. For production environments this translates into fewer insert changes and reduced machine downtime, improving overall throughput and process reliability. Secure chip control and surface quality for demanding parts Equipped with the IR20UN chipbreaker, this insert promotes consistent chip formation and evacuation when working with tough, work-hardening materials. Stable chip control minimises the risk of built-up edge and erratic cutting forces, helping to achieve a uniform surface finish and reducing the need for rework. The insert’s geometry supports secure cutting under moderate to robust cutting conditions, making it suitable for components where surface integrity and repeatability are essential. Practical choice for workshops and series production As an original Walter Tools product in the Tiger·tec Gold family, the insert is engineered for dependable everyday use. The WMP32G grade is a coated carbide formulation optimised for the thermal and mechanical challenges of stainless steel. Its application focus reduces process variability and simplifies grade selection across similar jobs, which supports efficient tooling management and predictable operating windows on the shop floor. Contact Metav Werkzeuge for tailored advice on integrating the Walter Tools TS16-IR20UN WMP32G insert into production or request cutting-parameter recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: TS16-IR20UN-WMP32G-WALTER Article designation: TS16-IR20UN WMP32G Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Grade: WMP32G Coating series: Tiger·tec Gold Chipbreaker: IR20UN Material group code: M Core data Material group: M Application category: Stainless steel (M) ISO designation: TS16-IR20UN WMP32G Brand: Walter Tools Special features Coating: Tiger·tec Gold Sort: WMP32G (coated carbide) Chip control geometry: IR20UN Optimised for medium to robust machining conditions Suitable for machining rostfreiem Stahl / stainless steel FAQ What materials is this insert designed for? The insert is specified for stainless steel (material group M); the WMP32G grade and Tiger·tec Gold coating support machining of these alloys. How does the IR20UN chipbreaker affect machining? The IR20UN chipbreaker promotes stable chip formation and evacuation, reducing built-up edge and improving surface finish when cutting tougher, work-hardening steels. Can this insert be used in continuous production runs? Yes, the combination of the WMP32G grade and Tiger·tec Gold coating is designed for consistent performance in series production under medium to robust conditions. Is the insert an original Walter Tools product? Yes, the TS16-IR20UN WMP32G is an original Walter Tools indexable insert manufactured to the brand’s specifications. Where to get cutting data or process recommendations? For application-specific cutting parameters and optimisation, contact Metav Werkzeuge; the supplier can provide recommendations tailored to the machining setup and component requirements. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are stated for explanatory purposes only. There is no affiliation between our company and the brands mentioned. The offered item is an original, factory-new product of the manufacturer.
TS16-IR20UN-F5 WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WMP32G grade for secure machining of stainless steels while maintaining consistent chip control; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TS16-IR20UN-F5 WMP32G indexable turning insert – Tiger·tec Gold, for stainless steel (Walter Tools) The TS16-IR20UN-F5 WMP32G is an indexable turning insert engineered for reliable machining of stainless steel in medium to robust turning operations, offering consistent chip control and prolonged cutting-edge life. Tiger·tec Gold coating for extended tool life WMP32G grade optimised for stainless steel IR20UN-F5 chipbreaker for secure chip formation Built for medium to heavy-duty turning Greater process stability for stainless-steel turning The Tiger·tec Gold coating combined with the WMP32G carbide grade delivers improved thermal resistance and wear behaviour when machining stainless steel. The coated substrate reduces the tendency for built-up edge and supports stable chip formation, which leads to fewer interrupted cuts and more predictable cycle times. In production terms, this means fewer tool changes and a more consistent surface finish under demanding conditions. The technology is particularly effective where toughness and heat generation are challenges. Longer tool life and repeatable performance in series production With a focus on productivity, the insert’s coated carbide formulation promotes longer tool life and repeatable cutting-edge conditions across runs. Stable edge retention reduces regrinding frequency and contributes to more reliable part tolerances from batch to batch. For manufacturing environments where uptime and repeatability matter, the insert supports efficient machining strategies and contributes to lower overall process costs through reduced tooling interventions. Practical application and handling for workshop environments As an indexable turning insert fitted with the IR20UN-F5 chipbreaker, this grade suits turning tasks that demand secure swarf control and robustness against stainless-steel characteristics such as work hardening. The insert is intended for use in established turning toolholders and can be integrated into existing tool setups without extensive changes. For users less familiar with chipbreaker geometry: the IR20UN-F5 design promotes short, segmented chips that evacuate reliably, lowering the risk of entanglement and improving surface integrity. For tailored cutting parameters and optimisation of feed and speed, technical consultation is recommended to match the insert to the specific stainless-steel grade and machining strategy. For tailored cutting data and availability of the Walter Tools TS16-IR20UN-F5 WMP32G insert, contact Metav Werkzeuge for expert recommendations and fast supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: TS16-IR20UN-F5-WMP32G-WALTER Name: indexable turning insert TS16-IR20UN-F5 WMP32G Type: indexable turning insert Manufacturer: Walter Tools Core data Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IR20UN-F5 ISO material group: M (stainless steel) Special features Coated carbide cutting grade Optimised for stainless-steel machining Designed for medium to heavy-duty turning Promotes stable chip formation and reduced built-up edge FAQ Which materials is this insert designed for? The TS16-IR20UN-F5 WMP32G insert is intended primarily for stainless steel (ISO group M) and performs reliably under the higher heat and toughness typical of these alloys. What benefit does the Tiger·tec Gold technology provide? Tiger·tec Gold coating on the WMP32G grade improves thermal resistance and wear performance, enhancing cutting-edge life and consistent performance during stainless-steel turning. How does the IR20UN-F5 chipbreaker affect machining? The IR20UN-F5 chipbreaker promotes secure chip control by producing short, manageable chips, which reduces swarf issues and supports a consistent surface finish in medium to robust turning operations. Is the insert suitable for high-production environments? Yes; the insert’s combination of coated carbide and grade optimisation supports repeatable results and reduced tool-change frequency, making it well suited to serial production where uptime and repeatability are priorities. Can this insert be used in existing toolholders? The indexable geometry of the TS16-IR20UN-F5 WMP32G matches common turning toolholder systems; however, verifying seat and clamping compatibility is recommended before series use. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original, factory-new product of the manufacturer Walter Tools.
TS16-IR20W WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of a coated carbide grade optimised for stainless steel, combined with Tiger‑tec Gold coating and the IR20W chipbreaker for consistent chip control and extended tool life; order via Metav Werkzeuge or consult their technical team for application support. TS16-IR20W WMP32G indexable turning insert — ideal for stainless steel machining (Walter Tools) TS16-IR20W WMP32G is an indexable turning insert designed for medium to robust cutting conditions on stainless steel, delivering controlled chip formation and reliable edge stability Tiger‑tec Gold coating for long life Optimised IR20W chip control Suitable for stainless steel machining Coated carbide grade WMP32G Maximise productivity when machining stainless steel The TS16-IR20W WMP32G insert combines a Tiger‑tec Gold coating with a beschichtetes Hartmetall substrate to improve thermal resistance and reduce flank wear under demanding conditions. The combination leads to a stable cutting edge and more predictable tool life, which supports uninterrupted production cycles. For shops working predominantly with rostfreie Stähle, this results in fewer index changes and lower tool-handling time, translating into measurable productivity gains per shift without compromising surface quality. Consistent chip control and safer turning operations Equipped with the IR20W chipbreaker geometry, the insert promotes short, repeatable chips that evacuate reliably from the cutting zone. Improved chip control reduces the risk of built-up edge and workpiece damage on ductile rostfreie Stähle, while also lowering the chance of swarf entanglement. The engineered chipformer helps maintain cutting forces within a narrow band, enabling steady feeds and a consistent finish. In practical terms, this means less machine downtime for clearing chips and a safer environment around lathes and turning centres. Practical fitment and application guidance for workshop use The insert’s form and grade make it suitable for a range of turning tasks from roughing under medium to tough conditions through to semi-finishing operations on rostfreie Stähle. As an indexable solution, the component simplifies tool replacement: a worn corner can be rotated to a fresh edge without regrinding, ensuring efficient changeover. When specifying holders and clamping, select a compatible toolholder that secures the TS16 form and supports the intended feed and depth of cut; this preserves the coated carbide performance and maintains repeatable results across batches. Contact Metav Werkzeuge for tailored advice on Walter Tools Tiger‑tec Gold inserts, availability and application recommendations: eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS16-IR20W-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-IR20W WMP32G Walter Tools Product type: Drehwendeschneidplatte (indexable turning insert) Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WMP32G Chipbreaker: IR20W Bezeichnung ohne Sorte: TS16-IR20W ISO designation: TS16-IR20W WMP32G Facts Material code: M Applicable material group: M (rostfreie Stähle) Coating technology: Tiger‑tec Gold Coated substrate: beschichtetes Hartmetall Special features Stable chip formation for rostfreie Stähle Designed for medium to robust cutting conditions Improved thermal resistance and wear behaviour Indexable geometry for quick corner changes Optimised chip evacuation with IR20W chipformer FAQ What materials is the insert suitable for? The TS16-IR20W WMP32G is specified for machining rostfreie Stähle (material group M) and is engineered to manage the toughness and heat characteristics of those alloys. How does the Tiger‑tec Gold coating benefit the cutting process? The Tiger‑tec Gold coating on the WMP32G grade increases thermal resistance and reduces wear on the beschichtetes Hartmetall substrate, which helps maintain edge integrity during prolonged turning operations on rostfreie Stähle. Which operations are best suited to this insert? The geometry and grade are suitable for roughing through to semi-finishing in medium to robust conditions, where consistent chip control and edge stability are required. Can the IR20W chipbreaker handle interrupted cuts? The IR20W chipformer is designed to produce short, controlled chips and offers improved performance in variable cutting scenarios, reducing the risk of built-up edge during interrupted or unstable cuts. Is this insert easy to replace and index in a production environment? Yes; as an indexable turning insert it allows rapid corner changes without regrinding, supporting fast tool changes and predictable tool life across production batches. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademark and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only and do not indicate any affiliation between our company and the manufacturers. The offered article is original, factory-new merchandise from the stated manufacturer.
TS16-IR24UN WMP22G WMP22G Wendeplatten - Walter Tools
Reliable chip control and robust edge stability are combined in the Tiger·tec Gold grade and IR24UN chipbreaker for dependable turning of stainless steels; ideal for medium to robust cutting conditions. Order the inserts directly via Metav Werkzeuge or consult our technical advisors for application support. TS16-IR24UN WMP22G indexable turning insert for stainless steels — Tiger·tec Gold by Walter Tools The TS16-IR24UN WMP22G is an indexable turning insert engineered for machining stainless steels under medium to robust conditions, offering a balance of wear resistance and secure chip formation for industrial turning operations. Tiger·tec Gold coating for enhanced wear resistance IR24UN chipbreaker for stable chip control Designed for stainless-steel applications Maximise process reliability when turning stainless steels The Tiger·tec Gold grade WMP22G combines a coated carbide body with a surface engineering designed to reduce adhesive wear and thermal softening when machining stainless steels. The IR24UN chipbreaker promotes consistent chip control, limiting built-up edge and helping to maintain a stable cutting edge even when machining materials that generate high temperatures and tend to work-harden. For production environments this means fewer unscheduled tool changes, more predictable component tolerances and a measurable improvement in process repeatability. The insert’s geometry supports secure seating in standard toolholders and contributes to uniform cutting behaviour across multiple indexings. Consistent performance that enhances productivity and finish Built for productive turning, the insert delivers stable chip formation and extended tool life under moderate to demanding conditions. The tailored coating of the Tiger·tec Gold series reduces friction at the cutting zone, which contributes to improved surface finish and less thermal load on the workpiece. In practice, the combination of grade and chipbreaker reduces downtime and increases component throughput by maintaining cutting performance across several edges. The TS16-IR24UN WMP22G is therefore particularly suitable where consistent part quality and repeatability are priorities. Practical guidance for workshop integration and material coverage Classified for ISO material group M, this insert is intended for stainless-steel applications (ISO 513) and is effective where materials exhibit toughness, high work-hardening tendency and elevated cutting temperatures. The IR24UN geometry assists in forming short to medium chips, which simplifies chip evacuation and reduces the risk of entanglement in multi-pass operations. For users integrating this grade into existing processes, modest adjustments to feed and coolant strategy typically suffice to exploit the insert’s edge stability and to secure the expected balance of life and finish. For machining scenarios that require fine-tuning, Metav Werkzeuge provides application advice to align tool choice with specific machine and workpiece conditions. For precise selection and application of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored machining advice and reliable supply of the TS16-IR24UN WMP22G. Technical data SKU: TS16-IR24UN-WMP22G-WALTER Designation: TS16-IR24UN WMP22G Type: Indexable turning insert Grade: WMP22G Series: Tiger·tec Gold Chipbreaker: IR24UN Material/grade: Coated carbide (beschichtetes Hartmetall) for stainless steels (ISO group M) Manufacturer: Walter Tools Facts ISO material group: M Application standard: ISO 513 (stainless steels) Intended cutting conditions: medium to robust Special features Tiger·tec Gold surface treatment for reduced wear IR24UN chipbreaker for reliable chip control Designed to limit built-up edge and thermal softening Stable cutting edge for productive machining Manufacturer: Walter Tools FAQ What materials is this insert suited for? This insert is designed for stainless steels (ISO group M); the TS16-IR24UN WMP22G grade is optimised for materials that require secure chip control and thermal resistance. What is the function of the IR24UN chipbreaker? The IR24UN chipbreaker on the insert promotes short to medium chip formation and improved chip control, reducing the likelihood of built-up edge and easing chip evacuation. How does Tiger·tec Gold improve machining? The Tiger·tec Gold surface treatment reduces friction and enhances wear resistance, which supports consistent cutting performance and improved surface finish during turning. Can the insert be used for heavy interrupted cuts? The TS16-IR24UN WMP22G is intended for medium to robust conditions; its edge stability and coated carbide construction provide reliable performance in demanding turning operations. Is the insert compatible with standard toolholders? Yes, the insert’s geometry is compatible with conventional indexable turning toolholders designed for the specified insert designation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is an original, brand-new product of the manufacturer.
TS16-IR24UN WMP32G Wendeplatten - Walter Tools
The combination of a Tiger·tec Gold coating and the WMP32G carbide grade delivers reliable cutting-edge stability and secure chip control for stainless-steel turning; reduced tool changes and consistent component quality follow. Order the insert directly via Metav Werkzeuge or consult the specialists for application advice. TS16-IR24UN WMP32G — Drehwendeschneidplatte (Indexable turning insert, optimised for stainless steels) by Walter Tools The TS16-IR24UN WMP32G is an indexable turning insert designed for secure machining of stainless steels in medium to robust cutting conditions Tiger·tec Gold coated carbide grade WMP32G Optimised for stainless steels (M) Stable chip formation with IR24UN breaker High process reliability under robust conditions Greater reliability for machining stainless steels The combination of the WMP32G grade and the Tiger·tec Gold coating provides improved resistance to heat and adhesive wear, which is critical when turning stainless steels that tend to be tough and generate high temperatures. This results in a more stable cutting edge and fewer interruptions for edge repair, which helps to maintain consistent dimensional accuracy and surface quality across production batches. The grade is intended for medium to robust conditions, offering a balance between performance and tool life. Predictable chip control reduces rework and downtime The IR24UN chipbreaker is engineered to promote stable chip formation, breaking chips into manageable segments and preventing long, tangled chips that can damage the workpiece or impede automation. Stable chips improve swarf handling and minimise the risk of built-up edge, supporting continuous machining cycles and reducing manual intervention. In practice, this leads to smoother process flows and lower scrap rates when working with demanding materials. Durable coating and grade for economic machining A coated carbide insert such as this delivers enhanced wear resistance compared with uncoated alternatives, extending the interval between index changes and lowering tooling costs per part. The Tiger·tec Gold technology combines coating hardness with toughness, helping to preserve the cutting geometry under intermittent or elevated-temperature cutting. The result is a cost-effective solution that supports sustained productivity in workshop and industrial turning operations. Contact Metav Werkzeuge to discuss the TS16-IR24UN WMP32G application in specific stainless-steel operations or to request tailored recommendations for toolholders and cutting parameters Technical Data Article number: TS16-IR24UN-WMP32G-WALTER Product type: Drehwendeschneidplatte (indexable turning insert) Brand: Walter Tools Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IR24UN ISO designation: TS16-IR24UN WMP32G Facts Material group suitability: M (stainless steels) Intended conditions: medium to robust cutting Coating technology: Tiger·tec Gold Special features Coated cemented carbide grade Designed for secure chip formation and stable cutting edges Optimised for machining stainless steels Suitable for industrial turning applications SKU: TS16-IR24UN-WMP32G-WALTER FAQ What materials is this insert suited for? The TS16-IR24UN WMP32G is optimised for stainless steels (material group M) and is intended for medium to robust cutting conditions. How does the IR24UN chipbreaker help production? The IR24UN chipbreaker promotes stable chip formation, producing manageable chips that reduce manual clearing, lower the risk of surface damage and support uninterrupted machining cycles. What are the advantages of the Tiger·tec Gold coating? The Tiger·tec Gold coating enhances wear resistance and thermal stability of the insert, contributing to longer cutting-edge life and consistent performance in demanding stainless-steel turning. Is this insert suitable for high-temperature cutting of stainless steel? The combination of WMP32G and the Tiger·tec Gold coating is designed to withstand elevated cutting temperatures typical of stainless-steel machining, supporting resistance to adhesive wear and edge degradation. Which product reference should be quoted when ordering or enquiring? Please refer to SKU TS16-IR24UN-WMP32G-WALTER and the designation TS16-IR24UN WMP32G when contacting sales or technical advisors. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS16-IR28UN WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for dependable stainless‑steel turning; with the IR28UN chipbreaker the insert ensures stable chip formation and extended edge life — order the insert via Metav Werkzeuge or request advice from our consultants. TS16-IR28UN WMP32G – Indexable turning insert, IR28UN chipbreaker, Tiger·tec Gold (Walter Tools) The TS16-IR28UN WMP32G is a coated carbide indexable turning insert designed for machining stainless steels under medium to robust cutting conditions, offering reliable chip control and long tool life. Tiger·tec Gold coating for extended tool life Optimised IR28UN chipbreaker for stainless steels Coated carbide grade WMP32G for stable cutting Designed for medium to heavy‑duty turning Reliable edge performance for stainless‑steel turning The combination of WMP32G grade and Tiger·tec Gold coating delivers a wear‑resistant cutting edge tailored to the demands of stainless steels, which often generate heat and tend to work‑harden. The coated carbides reduce flank wear and delay notch formation, so the insert sustains productive cutting intervals. This behaviour translates into more predictable tool life and fewer interruptions for index changes, supporting higher process efficiency and consistent component tolerances. Controlled chips and improved surface quality The IR28UN chipbreaker is optimised for the chip form typical of austenitic and other stainless steels; it promotes stable chip formation and reduces the risk of built‑up edge. Improved chip control lowers rework and assists in maintaining toolholder clearance and coolant paths. As a consequence, achievable surface finishes are enhanced and downstream cleaning/handling is simplified, which benefits cycle time and reduces quality rejects in serial production. Practical benefits for workshop efficiency As an indexable turning insert, this product supports fast tool replacement and economical use of cutting edges. The coated carbide construction minimises maintenance effort and helps maintain cutting performance over successive edge changes. Integration into existing tool systems is straightforward when matched with suitable holders for TS16 geometry; the result is reduced machine downtime and a more efficient production flow. For application recommendations or compatibility checks, Metav Werkzeuge can provide technical guidance tailored to the machining scenario. For machining stainless‑steel components with proven process reliability, contact Metav Werkzeuge for application advice and delivery of Walter Tools Tiger·tec Gold inserts at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: TS16-IR28UN-WMP32G-WALTER Designation: TS16-IR28UN WMP32G Type: Indexable turning insert Manufacturer: Walter Tools Coating series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR28UN Material group: M (stainless steels) Data SKU: TS16-IR28UN-WMP32G-WALTER Material category: M Series: Tiger·tec Gold Sort: WMP32G Special features Coated carbide grade for improved wear resistance Optimised for stainless‑steel machining Promotes stable chip formation and reduced built‑up edge Suitable for medium to robust cutting conditions FAQ Is this insert suitable for machining stainless steels? Yes. The TS16-IR28UN WMP32G insert is specifically formulated for stainless steels (material group M) and its Tiger·tec Gold coating and IR28UN chipbreaker support reliable chip control under such conditions. What advantages does the WMP32G grade provide? The WMP32G grade is a coated carbide designed to improve wear resistance and maintain a stable cutting edge during the machining of stainless steel, which helps reduce downtime and maintain component quality. How does the IR28UN chipbreaker affect performance? The IR28UN geometry is optimised to produce compact, controllable chips when turning stainless steel. This reduces the likelihood of built‑up edge and contributes to better surface finishes and consistent process behaviour. Can the insert be used for heavy machining? The insert is engineered for medium to robust turning applications; in appropriate toolholder setups it supports heavier cuts while maintaining edge stability thanks to the coated carbide grade and the Tiger·tec Gold technology. Which product identifier should be quoted when enquiring? Please quote the SKU TS16-IR28UN-WMP32G-WALTER and the designation TS16-IR28UN WMP32G when requesting technical details or compatibility information. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the brands cited. The offered item is original, factory‑new goods from the manufacturer Walter Tools.
TS16-IR28W WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating and the WMP32G grade for reliable machining of stainless steels, with the IR28W chipbreaker ensuring stable chip control and extended edge life. Order directly via Metav Werkzeuge or contact the consultancy team for tailored application advice. TS16-IR28W WMP32G indexable turning insert — Tiger·tec Gold, for stainless steels (Walter Tools) A TS16-IR28W WMP32G indexable turning insert engineered for secure chip formation and consistent cutting performance in the machining of stainless steels. Tiger·tec Gold coating for extended tool life Optimised IR28W chipbreaker for stable chips WMP32G grade for stainless steel machining Consistent edge stability in medium to robust cuts Maximised performance on stainless steels through advanced coating and grade The combination of the Tiger·tec Gold coating with the WMP32G carbide grade is designed to address the specific challenges of machining stainless steels: toughness, tendency to form built-up edge and elevated heat at the cutting zone. The coated hardmetal substrate stabilises the cutting edge under thermal load and reduces wear, while the grade supports reliable chip control in sustained operations. For shops seeking predictable tool life and fewer interruptions, this specification translates into reduced rework and steadier process windows. Greater productivity thanks to a purpose-built chipbreaker and geometry The IR28W chipbreaker is optimised for medium to robust turning operations where secure chip formation and evacuation are essential. By producing consistent chip shapes and preventing long, stringy swarf, the insert helps maintain machine uptime and improves surface finish reproducibility. The engineered interaction between chipbreaker and grade contributes to longer intervals between tool changes and supports higher parts-per-shift counts, making it a practical choice for production environments focused on throughput and process security. Practical application: simplified tool choice and reliable results on the shop floor Designed as an indexable turning solution, the TS16-IR28W family offers the economic benefit of replaceable cutting edges while delivering consistent cutting behaviour across serial production runs. The insert is suitable for conventional turning tasks on stainless steels, where stable edge life and predictable wear reduce scrap and inspection effort. For users evaluating tooling strategies, the combination of WMP32G and the IR28W breaker provides a clear, application-focused option that minimises the need for frequent trial setups. For machining rostfreier Stahl with a focus on dependable edge life and stable chips, consider the Tiger·tec Gold WMP32G inserts from Walter Tools — contact Metav Werkzeuge for specific application guidance or to arrange supply Technical Data SKU: TS16-IR28W-WMP32G-WALTER Product: Indexable turning insert (TS16-IR28W WMP32G) Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR28W Material group: M (rostfreie Stähle) SKU ID: TS16-IR28W-WMP32G-WALTER Facts Material group: M Application: rostfreie Stähle Coating: Tiger·tec Gold (coated carbide) Special features Optimised for stable chip formation Designed for medium to robust cutting conditions Promotes consistent edge stability and surface quality Walter Tools original production grade WMP32G FAQ What materials is this insert designed for? This insert is optimised for machining rostfreie Stähle (stainless steels); the WMP32G grade and Tiger·tec Gold coating support secure chip formation and wear resistance in these materials. What does the IR28W chipbreaker achieve? The IR28W chipbreaker produces controlled chip shapes and improves evacuation, reducing the risk of long swarf and promoting consistent surface finish during turning operations. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating provides enhanced thermal and wear protection to the coated hardmetal, extending edge life and supporting stable performance in higher temperature cutting zones. Is the TS16-IR28W insert suitable for production runs? Yes; the design and grade combination is aimed at production where repeatable edge life and process security reduce downtime and tooling changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original and new from the manufacturer.
TS16-IR3.0ISO WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance and the IR3.0ISO chipbreaker for reliable machining of rostfreier Stahl; the result is stable chip control, improved surface finish and fewer tool changes. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. TS16-IR3.0ISO WMP22G — Turning insert for rostfreier Stahl, Tiger‑tec Gold (Walter Tools) A TS16-IR3.0ISO WMP22G indexable turning insert designed for medium to robust turning operations in rostfreier Stahl, offering stable chip formation and a wear‑resistant coated carbide grade. Tiger‑tec Gold coating for extended life IR3.0ISO chipbreaker for stable chips Grade WMP22G optimised for rostfreier Stahl High process reliability under robust conditions Improve throughput with consistent chip control The combination of the WMP22G grade and the IR3.0ISO chipbreaker delivers predictable, broken chips and fewer interruptions during turning of rostfreier Stahl. The insert’s Tiger‑tec Gold coating and coated carbide substrate reduce flank and crater wear under the thermal loads typical of stainless steel turning. As a consequence, cycle times stay stable and tool change frequency is reduced, which supports higher overall productivity and more consistent part quality. This behaviour is particularly beneficial where long, uninterrupted runs and repeatable surface finish are required. Lower operational costs through enhanced wear resistance Designed for medium to robust cut conditions, the insert’s coated chemistry supports a stable cutting edge and improved resistance to adhesion and built‑up edge formation. The WMP22G grade is targeted at rostfreier Stahl and helps maintain dimensional consistency over successive passes. Fewer rework cycles and less frequent insert indexing lead to measurable cost savings and better machine utilisation. The technical design therefore contributes directly to a lower cost per component while maintaining the process reliability expected in production environments. Easy integration and clear application benefits Marked with the specification TS16-IR3.0ISO, the insert fits standard toolholders for this insert designation and can be adopted without complex setup changes. The IR3.0ISO geometry ensures effective chip segmentation even when material ductility or temperature rises, improving safety at the machine and reducing the need for manual chip handling. For customers who require guidance on cutting data or holder compatibility, concise recommendations can be provided to match feed and speed to the workpiece grade and job size, ensuring the best balance between surface quality and tool life. For availability and tailored machining advice on the Walter Tools TS16-IR3.0ISO WMP22G insert, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will support selection and delivery. Technical data Article number: TS16-IR3.0ISO-WMP22G-WALTER Designation: TS16-IR3.0ISO WMP22G Manufacturer: Walter Tools Grade: WMP22G Series: Tiger‑tec Gold SKU / UID: TS16-IR3.0ISO-WMP22G-WALTER Facts Material group: M Chipbreaker: IR3.0ISO Application group: rostfreier Stahl Product type: indexable turning insert Special features Coated carbide grade (Tiger‑tec Gold) Optimised for stable chip formation Suited to medium to robust turning conditions Designed for consistent surface quality and long tool life FAQ What materials is this insert intended for? The TS16-IR3.0ISO WMP22G is specifically designed for machining rostfreier Stahl and performs well under the higher temperatures and adhesion tendencies associated with these alloys. How does the IR3.0ISO chipbreaker affect machining? The IR3.0ISO chipbreaker promotes predictable chip segmentation and evacuation, reducing the risk of long, stringy chips and supporting uninterrupted production with the WMP22G grade. What benefit does the Tiger‑tec Gold series provide? The Tiger‑tec Gold coating enhances wear resistance and thermal stability, which extends the insert’s useful life and contributes to stable cutting edges during rostfreier Stahl turning. Is the insert suitable for high feed or heavy roughing? The TS16-IR3.0ISO WMP22G is intended for medium to robust conditions; it offers process reliability for heavier cuts compared with lower‑grade inserts, but final cutting parameters should be set according to machine capability and workpiece geometry. How does this insert improve surface finish? By maintaining a stable cutting edge and consistent chip control, the insert helps to produce repeatable and improved surface quality, decreasing the need for downstream finishing. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned solely for explanatory purposes; there is no affiliation between our company and the brand owners. The offered article is an original, factory‑new product from the stated manufacturer.
TS16-IR3.0ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for stable edge life and secure chip control when machining rostfreier Stahl; order directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. TS16-IR3.0ISO WMP32G indexable turning insert — Tiger·tec Gold for rostfreier Stahl by Walter Tools TS16-IR3.0ISO WMP32G is an indexable turning insert engineered for reliable, medium-to-robust machining of rostfreier Stahl in industrial turning operations Tiger·tec Gold coating for longer life IR3.0ISO chipbreaker for stable chips Optimised for rostfreier Stahl (ISO group M) Walter Tools quality and edge stability Consistent performance for rostfreier Stahl with extended tool life The coated WMP32G carbide grade, part of the Tiger·tec Gold series, delivers predictable wear behaviour and improved resistance against adhesion and built-up edge when machining rostfreier Stahl. The combination of coating technology and substrate composition supports a stable cutting edge, which reduces unplanned rework and contributes to steadier component quality. For production environments where tool-change intervals and surface finish consistency matter, this insert offers a measurable improvement in process reliability. Reliable chip control and why the IR3.0ISO chipbreaker matters The integrated IR3.0ISO chipbreaker is designed to form short, controlled chips in interrupted and continuous turning of rostfreie Werkstoffe. By shaping the chip flow and reducing entanglement, the chipbreaker lowers the risk of tool damage and workpiece marking, while also simplifying chip evacuation from the cut. For shops without specialist coolant strategies, this chip control capability helps maintain process stability and reduces manual chip handling, improving operator safety and machine uptime. Operational benefits: productivity, repeatability and inventory simplicity Using a standardised grade like WMP32G simplifies tool management: consistent behaviour across shifts, fewer variant SKUs on the shelf and more reliable scheduling of maintenance intervals. The insert supports medium to robust cutting parameters, enabling productive material removal rates without sacrificing surface integrity. In practice, this means shorter cycle times for series turning, fewer scrap parts, and clearer cost-per-part calculations — advantages that feed directly into more efficient production planning and higher overall equipment effectiveness. For tailored cutting data or to secure delivery of TS16-IR3.0ISO WMP32G inserts for rostfreier Stahl operations, contact Metav Werkzeuge for expert guidance and fast order processing. Technical data Article number: TS16-IR3.0ISO-WMP32G-WALTER Product name: Drehwendeschneidplatte TS16-IR3.0ISO WMP32G Walter Tools Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Grade: WMP32G Series: Tiger-tec Gold Core data No numerical dimensions or cutting parameters provided in the data Special features Coating technology: Tiger·tec Gold Chipbreaker: IR3.0ISO Material group: M (rostfreier Stahl applicable) Carbide type: coated hardmetal (as indicated by grade description) Typical application: medium to robust conditions for rostfreier Stahl FAQ What materials is this insert suitable for? The TS16-IR3.0ISO WMP32G insert is intended for machining rostfreier Stahl (ISO group M) and is formulated to manage the toughness and thermal characteristics of these alloys. How does the Tiger·tec Gold coating help in practice? Tiger·tec Gold enhances the wear resistance and heat management of the WMP32G grade, which in turn prolongs cutting-edge life and reduces the frequency of insert changes during serial turning. What is the purpose of the IR3.0ISO chipbreaker? The IR3.0ISO chipbreaker promotes short, controlled chips and consistent evacuation, lowering the risk of workpiece damage and improving process safety during turning operations. Is this insert compatible with standard indexable turning tool holders? The TS16-IR3.0ISO WMP32G follows conventional indexable insert formats and is suitable for use in appropriate turning holders designed for this insert geometry and clamping style. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the brands listed. The offered item is original, factory-new merchandise of the manufacturer.
TS16-IR3.0ISO-F5 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, reliable chip control and process stability for efficient stainless-steel turning; order the inserts directly via Metav Werkzeuge or consult the team for tailored machining advice. TS16-IR3.0ISO-F5 WMP32G turning indexable insert — Tiger·tec Gold coating, for stainless steels by Walter Tools TS16-IR3.0ISO-F5 WMP32G is a coated turning insert designed for robust machining of stainless steels in medium to heavy conditions Tiger·tec Gold coating for extended tool life Optimised IR3.0ISO-F5 chipformer for stable chips Designed for stainless steels (ISO group M) Consistent performance through advanced coating technology The Tiger·tec Gold coating on this insert provides a balance of wear resistance and toughness that extends service life under the thermal and mechanical stresses typical of stainless steels. This combination reduces flank wear and minimises the risk of built-up edge, which in turn supports predictable tool change intervals and more stable production runs. For operations where repeatability matters, the WMP32G grade supplies the durability required for medium to robust cutting conditions without frequent insert changes. Reliable chip control that improves throughput The IR3.0ISO-F5 chipformer is engineered to support secure chip breakage and evacuation when turning materials prone to stringing and high heat. Stable chip formation lowers the chance of surface damage and tool interference, helping to maintain cycle times and reduce manual clearing. In practical terms, the optimised chip geometry contributes directly to higher effective cutting speeds and fewer interruptions, which translates into measurable improvements in machining throughput and overall equipment effectiveness. Application-focused design for stainless-steel turning Classified for ISO group M, this insert suits common stainless-steel alloys that typically require enhanced edge stability and heat management. The coated carbide grade is aimed at users who machine parts with moderate to heavy engagement and need a dependable insert for shafts, sleeves and other turned components. The design reduces downtime associated with unpredictable wear and lets process planners select cutting parameters with greater confidence, supporting tighter tolerances and consistent surface finish. Practical benefits for workshop efficiency and process security Beyond coating and chip control, the insert supports broader production goals: reduced tool consumption, fewer secondary operations and improved predictability of machining windows. When combined with appropriate holders and tooling systems, the insert contributes to process security by lowering variability in tool life and part quality. For workshops aiming to raise productivity while keeping quality stable, this insert offers a pragmatic balance of performance and robustness. For application advice on Walter Tools Tiger·tec Gold WMP32G inserts and specific cutting-parameter recommendations, contact Metav Werkzeuge by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: TS16-IR3.0ISO-F5-WMP32G-WALTER Label: Drehwendeschneidplatte TS16-IR3.0ISO-F5 WMP32G Walter Tools Product type: Drehwendeschneidplatte Series: Tiger-tec Gold Grade: WMP32G Facts Material group: M (stainless steels) Chipformer: IR3.0ISO-F5 SKU: TS16-IR3.0ISO-F5-WMP32G-WALTER Special features Coating: Tiger·tec Gold Application: stainless-steel turning, medium to robust conditions Manufacturer brand: Walter Tools FAQ What materials is this insert suitable for? The TS16-IR3.0ISO-F5 WMP32G insert is specified for stainless steels (ISO group M) and is optimised for medium to robust cutting conditions. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating on the WMP32G grade increases wear resistance and edge stability, extending tool life and improving process reliability during stainless-steel turning. Is the IR3.0ISO-F5 chipformer suitable for long, stringy chips? Yes, the IR3.0ISO-F5 chipformer is designed to promote controlled chip breakage and evacuation, helping to prevent entanglement and surface damage in challenging stainless-steel applications. Can these inserts be used for finishing operations? The WMP32G grade is intended primarily for medium to robust cutting; finishing is possible depending on the chosen cutting parameters and machine stability, but customers often pair it with finer grades for dedicated finishing passes. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
TS16-IR3.0ISO-M5 WMP32G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold wear resistance and the IR3.0ISO-M5 chipbreaker to ensure stable chip formation and consistent results when machining rostfreier Stahl; order directly via Metav Werkzeuge or consult our specialists for application guidance. TS16-IR3.0ISO-M5 WMP32G – Indexable turning insert (Tiger·tec Gold) by Walter Tools The TS16-IR3.0ISO-M5 WMP32G is an indexable turning insert engineered for reliable performance in medium to robust machining conditions, particularly suited to rostfreier Stahl. Tiger·tec Gold coating for high wear resistance Optimised IR3.0ISO-M5 chipbreaker design WMP32G grade for rostfreier Stahl machining Walter Tools quality for stable cutting performance Higher process reliability when machining rostfreier Stahl The insert’s WMP32G grade, part of the Tiger·tec Gold series, is specifically designed for the challenges of rostfreier Stahl, which typically causes built-up edge and high heat. The composition and coating of this grade support predictable chip formation and maintain a stable cutting edge under higher thermal loads. As a result, the tool contributes to fewer interruptions in production and helps maintain component quality over longer runs. How the IR3.0ISO-M5 chipbreaker improves productivity The IR3.0ISO-M5 chipbreaker geometry promotes short, controllable chips when turning ductile and work-hardening materials. By converting problematic swarf into a manageable form, the chipbreaker reduces the risk of entanglement and improves surface finish consistency. This technical design element therefore translates into tangible shop-floor advantages: smoother machining cycles, reduced downtime and improved handling of swarf during automated or manual operations. Practical benefits for workshop use and process planning As an indexable insert from Walter Tools, this component supports fast insert changes and repeatable positioning, which shortens setup time and simplifies inventory management. The grade is optimised for medium to sturdy cutting parameters, enabling competent performance across a broad range of rostfreier Stahl alloys. For planners and operators, the combination of a coated substrate and a defined chipbreaker means more predictable tool life and easier parameter scaling across similar turning operations. Material compatibility and application context Engineered for the material group M, this insert is suitable for rostfreier Stahl machining under conditions where stable cutting edges are essential. The Tiger·tec Gold coating enhances resistance to abrasive wear and thermal impact, supporting higher productivity in batch and continuous production. Applied thoughtfully within cutting data recommendations, the insert can help achieve consistent tolerances and surface integrity in demanding turning tasks. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and for ordering the TS16-IR3.0ISO-M5 WMP32G; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TS16-IR3.0ISO-M5-WMP32G-WALTER Designation: TS16-IR3.0ISO-M5 WMP32G Manufacturer: Walter Tools Facts Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IR3.0ISO-M5 Special features Coating technology: Tiger·tec Gold Material group suitability: M (rostfreier Stahl) Product type: Indexable turning insert (Drehwendeschneidplatte) FAQ Is this insert suitable for rostfreier Stahl applications? Yes. The TS16-IR3.0ISO-M5 WMP32G is formulated for machining rostfreier Stahl and supports stable chip formation and edge integrity under medium to robust cutting conditions. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WMP32G grade improves wear resistance and thermal stability, helping the insert sustain longer cutting intervals and consistent performance in rostfreier Stahl turning operations. How does the IR3.0ISO-M5 chipbreaker affect surface finish? The IR3.0ISO-M5 chipbreaker promotes short, controllable chips that reduce entanglement and contribute to a more consistent surface finish during turning with the TS16-IR3.0ISO-M5 WMP32G insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TS16-IR3.0TR WMP32G Wendeplatten - Walter Tools
TS16-IR3.0TR WMP32G Drehwendeschneidplatte für rostfreie Stähle von Walter Tools Die TS16-IR3.0TR WMP32G ist eine Wendeschneidplatte zur wirtschaftlichen und prozesssicheren Bearbeitung von rostfreien Stählen im industriellen Zerspanungsbetrieb. Hohe Prozesssicherheit bei rostfreien Stählen Tiger-tec Gold Beschichtung für lange Standzeit IR3.0TR Spanbrecher für stabile Spanbildung Beschichtetes Hartmetall für robuste Schneidkante Präzise Kontrolle bei rostfreien Werkstoffen dank optimierter Beschichtung Die Wendeschneidplatte wurde speziell für die Bearbeitung von rostfreien Stählen entwickelt. Die WMP32G-SortenÂtechnologie in Verbindung mit der Tiger·tec Gold-Beschichtung reduziert Aufbauschneiden und unterstützt eine gleichmäßige Spanbildung, wodurch Nacharbeit und Maschinenstillstandzeiten minimiert werden. Anwender profitieren von einer stabilen Schneidkante und längeren Werkzeugstandzeiten, was die Produktivität in der Fertigung erhöht. Effiziente Spanführung und Wiederholgenauigkeit durch IR3.0TR Der integrierte IR3.0TR Spanbrecher sorgt für kontrollierte Spanabfuhr bei mittleren bis robusten Einsatzbedingungen. Ein sauberer Spanfluss verringert das Risiko von Maschinenstillständen und verbessert die Maß- und OberflächenÂgenauigkeit. Für Betriebe bedeutet das: weniger Ausschuss, konstante Qualität und planbare Instandhaltungsintervalle. Passgenau für industrielle Fertigung und breite Werkstoffabdeckung Die Platte eignet sich besonders für Produktionsumgebungen, die häufig rostfreie Stähle verarbeiten und Wert auf wiederholbare Ergebnisse legen. Durch die Kombination aus beschichtetem Hartmetall und optimiertem Spanformer ist dieses Wendeschneidplattenkonzept auf robuste Zerspanung ausgelegt und bietet Anwendern im Maschinenbau, in Lohnfertigungen und in Serienbetrieben eine wirtschaftliche Lösung. Empfehlen Sie die TS16-IR3.0TR WMP32G von Walter Tools für anspruchsvolle Bearbeitungsaufgaben an rostfreien Stählen und kontaktieren Sie unsere technische Beratung unter info@metav-werkzeuge.com oder +49 2822 7131930 für Einsatzempfehlungen und Verfügbarkeitsprüfungen Produkteigenschaften Artikelnummer: TS16-IR3.0TR-WMP32G-WALTER Marke: Walter Tools Serie: Tiger-tec Gold Sorte: WMP32G Bezeichnung: TS16-IR3.0TR WMP32G Produktart: Drehwendeschneidplatte Fakten Besonderheiten Beschichtetes Hartmetall Spanbrecher: IR3.0TR (optimiert für stabile Spanbildung) Bearbeitbar: rostfreie Stähle (Werkstoffgruppe M) Sortenbeschreibung: WMP32G, Teil der Tiger·tec Gold Technologie Einsatzbedingungen: mittlere bis robuste Anwendungen FAQ Welche Werkstoffe bearbeitet die TS16-IR3.0TR WMP32G besonders gut? Die TS16-IR3.0TR WMP32G von Walter Tools ist für die Bearbeitung von rostfreien Stählen ausgelegt und bietet durch die WMP32G-Sorte eine stabile Spanbildung bei zähen Werkstoffen. Welche Vorteile bietet die Tiger·tec Gold Beschichtung? Die Tiger·tec Gold Beschichtung verbessert die Verschleißfestigkeit und Standzeit, wodurch die Walter Tools Wendeschneidplatte längere Einsatzintervalle ermöglicht und die Bearbeitungskosten senkt. Wie unterstützt der IR3.0TR Spanbrecher die Fertigung? Der IR3.0TR Spanbrecher optimiert die Spanform und -abfuhr, was zu weniger Aufbauschneiden und reduzierten Maschinenstillständen bei der Bearbeitung von rostfreien Stählen führt. Ist die Platte für Serienfertigung geeignet? Ja, die TS16-IR3.0TR WMP32G eignet sich durch ihre Prozesssicherheit und robuste Beschichtung besonders für Serien- und Lohnfertigungen mit hohem Anforderungsprofil. Wo erhält man technische Einsatzdaten oder Standzeitempfehlungen? Detaillierte Einsatzparameter und Standzeitdaten liefert die technische Beratung; für Fragen zur TS16-IR3.0TR WMP32G erreichen Sie info@metav-werkzeuge.com oder +49 2822 7131930. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Hersteller: Die Walter AG; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns.
TS16-IR32UN WMP32G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the IR32UN chipbreaker results in reliable chip control and extended edge life when machining rostfreier Stahl, making the insert a practical choice for medium to robust turning operations. Benefit from consistent surface quality and predictable tool wear to keep cycles stable. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. TS16-IR32UN WMP32G indexable turning insert — Tiger·tec Gold coated, for rostfreier Stahl — Walter Tools A robust TS16-IR32UN WMP32G indexable turning insert engineered for secure chip formation and stable cutting when machining rostfreier Stahl under medium to robust conditions Tiger·tec Gold coated carbide for rostfreier Stahl IR32UN chipbreaker for stable chip formation Optimised edge stability for medium to robust conditions Walter Tools quality for consistent tool life Dependable chip control that reduces interruptions The IR32UN chipbreaker is designed to promote stable chip formation when cutting difficult-to-machine materials such as rostfreier Stahl. Stable chips reduce the risk of built-up edge and machine stoppages, which leads to fewer unscheduled interventions and more predictable production cycles. By controlling chip shape and evacuation, the insert supports higher process reliability and simpler swarf handling on automated lathes and turning centres. This focused chip geometry helps maintain consistent cutting forces, which in turn protects the machine spindle and clamping systems during longer cutting passes. Longer tool life and improved surface quality The grade WMP32G, part of the Tiger·tec Gold family, is a coated carbide formulation developed for resistance to abrasion and thermal loads encountered with rostfreier Stahl. The combination of substrate and coating improves edge retention under medium to robust cutting conditions, which extends service intervals and lowers tooling consumption per workpiece. As a result, surface finishes are more consistent and rework is less frequent, improving overall cost-effectiveness. The insert’s design focuses on reliable cutting-edge behaviour rather than solely on aggressive removal rates, offering a balanced route to productivity and quality. Practical selection and process reliability for production Selection of cutting parameters is simplified by the insert’s intended application range and its material group marking M for rostfreier Stahl. The insert is suitable for applications requiring secure chip control and resilient edge performance; machining strategies can therefore favour consistent feeds and moderate speeds to exploit the grade’s strengths. For shops standardising inserts across varied stainless applications, the predictable wear characteristics and robust chip control contribute to fewer tool changes and steadier output. For application-specific optimisation, consultation on speeds, feeds and coolant strategies can refine performance without trial-and-error. For high-process reliability with Walter Tools’ Tiger·tec Gold grade, contact Metav Werkzeuge for procurement and tailored technical advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: TS16-IR32UN-WMP32G-WALTER Designation: Drehwendeschneidplatte TS16-IR32UN WMP32G Product type: Indexable turning insert Manufacturer: Walter Tools Core specifications Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IR32UN Material group: M Suitable for: rostfreier Stahl Special features Coated carbide (beschichtetes Hartmetall) Designed for medium to robust conditions Focus on stable chip formation Optimised edge stability FAQ What materials is the TS16-IR32UN WMP32G suited for? The TS16-IR32UN WMP32G is designed primarily for rostfreier Stahl and performs reliably under medium to robust cutting conditions. How does the IR32UN chipbreaker improve machining? The IR32UN chipbreaker promotes controlled chip formation with the TS16-IR32UN WMP32G, reducing built-up edge and improving process stability. What advantages does the Tiger·tec Gold grade offer? The Tiger·tec Gold grade WMP32G provides enhanced wear resistance and thermal stability for prolonged edge life when machining rostfreier Stahl. Can this insert be used on automated turning centres? Yes, the insert’s stable chip control and predictable wear behaviour make the TS16-IR32UN WMP32G suitable for automated turning operations requiring consistent runs. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, brand-new product of Walter Tools.
TS16-IR40UN WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP32G carbide grade and targeted chip control for reliable stainless steel turning. Order the TS16-IR40UN WMP32G through Metav Werkzeuge or consult our specialists for process optimisation and rapid availability. TS16-IR40UN WMP32G indexable turning insert — Tiger·tec Gold, for stainless steel (Walter Tools) The TS16-IR40UN WMP32G is an indexable turning insert designed for productive machining of stainless steel under moderate to robust cutting conditions. Tiger·tec Gold coating Optimised for stainless steel Stable chip formation Robust carbide substrate Increased productivity when machining stainless steel The combination of the Tiger·tec Gold coating and the WMP32G grade delivers consistent cutting performance when machining stainless steel (ISO M). The coating reduces friction and thermal load at the cutting edge, which supports stable chip formation and lowers the risk of built-up edge. For production environments this means fewer interruptions for edge dressing or insert changes, contributing to a measurable increase in machining uptime and part-to-part consistency. The result is improved throughput without sacrificing component quality. Fewer tool changes through improved edge stability A coated carbide substrate that is optimised for the specific demands of austenitic and other stainless alloys provides enhanced edge retention and resistance to work-hardening effects. The IR40UN chipbreaker geometry promotes controlled chip flow and prevents long, stringy chips that can foul the tool or workpiece. In practice, the indexable insert requires less frequent intervention, which reduces setup time and supports leaner tool management in the workshop while maintaining a reliable surface finish. Practical guidance for process integration This insert is suited to turning operations where heat generation and material toughness are significant factors. The ISO classification as M indicates suitability for stainless steels; speeds and feeds should be adapted to alloy and component geometry to exploit the coating and grade fully. The chipbreaker design assists in achieving short, manageable chips across a range of depths of cut. When integrated into a standard toolholder system, the insert supports steady, repeatable results and straightforward inventory handling in production environments. For process-critical stainless steel turning, specify the TS16-IR40UN WMP32G from Walter Tools via Metav Werkzeuge for direct supply and tailored application advice—contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TS16-IR40UN-WMP32G-WALTER Article designation: TS16-IR40UN WMP32G Product type: Indexable turning insert Manufacturer: Walter Tools Core data ISO material group: M Coating series: Tiger·tec Gold Grade: WMP32G Special features Chipbreaker: IR40UN Coated carbide grade optimised for stainless steel Stable chip formation and good edge retention Application: machining stainless steel (ISO M) FAQ What materials is this insert intended for? The TS16-IR40UN WMP32G is intended primarily for stainless steel applications (ISO M), where toughness and heat generation require a coated carbide solution. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating reduces friction and thermal load at the cutting zone, improving tool life and supporting consistent chip formation with the WMP32G grade insert. Which chipbreaker is fitted and what does it do? The insert features the IR40UN chipbreaker, designed to promote controlled, short chips and reduce the risk of chip entanglement during turning operations. Is this insert suitable for heavy interrupted cuts? The robust carbide grade and coating provide good resistance under moderate to robust cutting conditions; suitability for specific interrupted-cut applications should be validated in the intended process. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation. The offered item is an original, factory-new product of the manufacturer Walter Tools.
TS22-EL-N60 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, reliable chip control and tailored performance for machining stainless steel. Order the TS22-EL-N60 WMP32G insert via Metav Werkzeuge or consult our specialists for application-specific recommendations. TS22-EL-N60 WMP32G indexable turning insert (for stainless steel) – Walter Tools TS22-EL-N60 WMP32G is an indexable turning insert developed for robust and consistent performance in stainless steel machining, featuring the Tiger·tec Gold coating technology. Tiger·tec Gold coating Optimised EL‑N60 chip control Suitable for stainless steel (M) High edge stability and long tool life Reliable edge stability for stainless steel turning The graded WMP32G carbide, embedded in the Tiger·tec Gold series, is optimised for the challenges of machining stainless steel. The material group M describes alloys that are prone to work hardening and thermal build-up; the grade supports predictable fracture behaviour and a stable cutting edge, reducing the risk of built-up edge and increasing process repeatability. As a result, operators benefit from fewer interruptions and a steadier surface finish during serial turning operations. Consistent chip control and predictable machining Equipped with the EL‑N60 chipbreaker, this indexable insert promotes controlled chip formation under medium to heavy cutting conditions. The chip geometry reduces entanglement and improves evacuation, which lowers machine downtime and simplifies automated part handling. The combination of a coated carbide substrate and an engineered chipbreaker supports reproducible cutting forces and contributes to overall process reliability on turning centres and lathes. Practical advantages and selection guidance For tool planners and shopfloor engineers the main advantages are clear: the insert offers enhanced resistance to edge degradation and a broad application window for stainless steel. Selection should consider cutting parameters that match the grade’s intended use; moderate feed with stable coolant and correct rake settings typically deliver the best balance between life and surface quality. Where vibration or interrupted cuts occur, pairing this insert with a suitable toolholder designed for rigidity further improves outcomes. For reliable machining of stainless steel with the Tiger·tec Gold grade, contact Metav Werkzeuge to source the TS22-EL-N60 WMP32G insert or request tailored process advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: TS22-EL-N60-WMP32G-WALTER Product type: indexable turning insert Designation: TS22-EL-N60 WMP32G Manufacturer: Walter Tools Facts Grade designation: WMP32G Series: Tiger·tec Gold Chipbreaker: EL‑N60 Material group: M (stainless steels) Special features Coated carbide grade Optimised chip control EL‑N60 Suited for stainless steel applications Stable cutting edge and long tool life FAQ What materials is this insert designed for? This insert is specified for machining stainless steel; the WMP32G grade is optimised for the typical behaviour of stainless steels in turning operations. How does the EL‑N60 chipbreaker improve production? The EL‑N60 chipbreaker on the Walter Tools insert ensures predictable chip formation and evacuation, reducing stoppages and easing automated handling. Is this insert suitable for heavy or interrupted cuts? The coated carbide and robust chip control make the insert suitable for medium to robust cutting conditions; for severe interruption, combine with a rigid toolholder and adjusted cutting data. What distinguishes Tiger·tec Gold in daily use? Tiger·tec Gold provides a coating and substrate combination that enhances edge stability and wear resistance, leading to longer life and consistent surface quality in stainless steel machining. Manufacturer: Walter Tools; Walter AG, Tübingen, Germany Responsible / Dealer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
TS22-EL06UN WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of consistent edge stability, optimised chip control and long tool life for reliable turning of stainless steel; order directly via Metav Werkzeuge or consult our technical advisors for process-matched recommendations. TS22-EL06UN WMP32G — indexable turning insert with Tiger·tec Gold coating (Walter Tools) The TS22-EL06UN WMP32G is an indexable turning insert designed for turning stainless steel under medium to robust cutting conditions, combining a coated carbide substrate with a dedicated chipbreaker for secure chip formation. Tiger·tec Gold coating for extended tool life Grade WMP32G tuned for stainless steel machining Coated carbide substrate for stable cutting edge Reliable chip control with EL06UN chipbreaker Maximise process reliability when machining stainless steel The combination of the Tiger·tec Gold coating and the WMP32G grade delivers a balance of wear resistance and toughness that benefits continuous production. The coating reduces flank wear and thermal loading, which in turn maintains cutting-edge geometry for longer intervals. For shops machining stainless steel (ISO group M) this insert supports stable cutting forces and reduces the risk of built-up edge, which often causes surface defects and rework. The insert is therefore suitable where repeatable part quality and minimised downtime are priorities. Why the coating and grade matter for consistent results A coated carbide insert differs from uncoated grades by offering a hard, low-friction surface layer that protects the substrate during high-temperature contact. The Tiger·tec Gold technology combines a multi-layer coating system engineered for adhesion and thermal stability, while the WMP32G composition provides the necessary toughness for scores of interrupted or continuous cuts. The chipbreaker EL06UN is matched to this combination to support predictable chip formation; predictable chips improve machine cleanliness and reduce cycle-time variability, which is crucial for optimising overall throughput. Practical benefits in day-to-day turning operations Using this indexable insert reduces the frequency of tool changes and the need for corrective finishing passes thanks to its stable cutting edge and controlled wear behaviour. The insert supports medium to robust cutting parameters, helping to achieve higher metal removal rates without compromising surface finish. The engineering behind the chipbreaker encourages short and controlled chips, simplifying chip evacuation and lowering risks to tool holders and workpiece integrity. The result is fewer stoppages and an easier-to-manage process window for production planning. Integration and handling for production use The geometry identified by the designation TS22-EL06UN indicates a standardised interface for quick indexing and reproducible positioning in common tool holders. Parts consolidation and inventory management benefit from the insert’s established series and grade labelling, allowing procurement and stores to align stock with machining tasks for stainless steel. For shops introducing the grade, trial sequences with incremental parameter adjustments are recommended to determine the optimum feeds and speeds for the specific part geometry and machine-tool capability. Contact Metav Werkzeuge for application-specific advice on Walter Tools Tiger·tec Gold inserts and to ensure optimal machining strategies for stainless steel. Technical Data SKU: TS22-EL06UN-WMP32G-WALTER Article: TS22-EL06UN WMP32G Product type: Drehwendeschneidplatte Grade: WMP32G Coating series: Tiger·tec Gold Chipbreaker: EL06UN Manufacturer: Walter Tools Facts Material code: M (stainless steels) Applicable ISO group: M (ISO 513) Intended use: Turning / indexable insert Series: Tiger·tec Gold Special features Coated carbide substrate Designed for stainless steel machining Stable chip formation and edge retention Suited to medium to robust cutting conditions FAQ What materials is this insert designed for? The insert is engineered for machining stainless steel (ISO group M); the Walter Tools TS22-EL06UN WMP32G insert is optimised for the toughness and thermal demands of these steels. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WMP32G grade reduces wear and improves thermal resistance, which helps the insert maintain a stable cutting edge and extend tool life under demanding turning operations. What role does the EL06UN chipbreaker play? The EL06UN chipbreaker is shaped to promote consistent, controlled chips when cutting stainless steel, improving chip evacuation and protecting the toolholder and part surface finish. Can this insert be used for high-speed applications? The combination of coated carbide and the WMP32G grade is geared toward process reliability; evaluation at target spindle speeds and feeds is recommended to establish stable parameters for specific machines and part geometries. Is this an original Walter Tools product? The TS22-EL06UN WMP32G is offered as a Walter Tools indexable turning insert designed and produced for metalcutting applications, intended for use in professional turning processes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarked names and product designations are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com