TS22-EL07UN WMP32G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold technology and the WMP32G coated‑carbide grade for dependable machining of stainless steel; the result is stable chip formation, extended tool life and fewer unplanned interruptions in production. Order the TS22‑EL07UN WMP32G insert via Metav Werkzeuge or request specialist advice from their consultants for process selection. TS22-EL07UN WMP32G indexable turning insert — Tiger‑tec Gold, for stainless steel (Walter Tools) The TS22-EL07UN WMP32G is an indexable turning insert from the Tiger‑tec Gold series, engineered to provide secure chip control and consistent performance when machining stainless steel under medium to robust conditions. Tiger‑tec Gold coating WMP32G coated carbide grade Optimised for stainless steel (M) Stable chip formation and edge life Increased throughput through consistent wear resistance The coated‑carbide WMP32G grade, part of the Tiger‑tec Gold family, delivers improved wear resistance and thermal stability compared with uncoated or conventional grades. This results in fewer tool changes and a more predictable tool life, which directly supports higher machine uptime and better throughput. For process engineers, the reduced need for frequent insert replacement simplifies scheduling and lowers indirect production costs. Reliable performance when machining stainless steel Materials in ISO group M tend to be tough, prone to built‑up edge and generate heat during cutting; the combination of the EL07UN chipbreaker geometry and the Tiger‑tec Gold technology promotes secure chip formation and effective heat management. The insert’s design helps prevent serrated wear and minimises irregular chip shapes, improving surface finish and reducing the likelihood of rework. This technical advantage is particularly relevant for components requiring tight tolerances and consistent surface quality. Easier integration into existing turning processes The TS22‑EL07UN designation corresponds to a common insert form factor, enabling straightforward interchangeability in many turning tool holders without major setup revisions. Selection of the WMP32G grade reduces trial‑and‑error in process development because the coated carbide is tuned for the demands of stainless steel. As a result, cycle times and tool‑setting effort can be reduced, helping maintenance teams and operators to maintain reproducible results across batches. Stable machining for production reliability Choosing a grade from a proven series like Tiger‑tec Gold supports operational stability and repeatability. The engineered coating and cutting‑edge integrity contribute to consistent component quality over longer production runs. For production managers seeking dependable performance, this insert offers a balance of wear resistance and chip control that helps protect part tolerances and maintain process capability during continuous operation. For reliable stainless‑steel turning with Tiger‑tec Gold performance, contact Metav Werkzeuge for tailored application advice and fast availability of the Walter Tools TS22‑EL07UN WMP32G insert: info@metav-werkzeuge.com · +49 2822 7131930 Technical data SKU: TS22-EL07UN-WMP32G-WALTER Product type: indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools ISO designation: TS22-EL07UN WMP32G Facts Material group: M (stainless steel) Grade: WMP32G Series: Tiger‑tec Gold Chipbreaker: EL07UN Special features Coated carbide grade Optimised for machining stainless steel Promotes stable chip formation Designed for medium to robust cutting conditions FAQ What materials is this insert designed for? The TS22‑EL07UN WMP32G insert is designed primarily for stainless steel (ISO group M), with the WMP32G coated‑carbide grade tuned to manage toughness and heat generation. How does the Tiger‑tec Gold series improve performance? Tiger‑tec Gold provides enhanced wear resistance and thermal stability, so the WMP32G grade maintains a more durable cutting edge and supports more consistent machining results. What role does the EL07UN chipbreaker play? The EL07UN chipbreaker promotes controlled chip formation and reduces the risk of built‑up edge, improving surface finish and making chip evacuation more reliable during turning operations. Is the insert suitable for continuous production runs? Yes, the coated‑carbide construction and robust chip control make this insert well suited to longer production runs where edge stability and repeatability are required. Can the TS22‑EL07UN WMP32G be used in standard turning tool holders? The TS22‑EL07UN designation corresponds to a standard insert form, facilitating integration into many common tool holders without major modifications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, factory‑new goods from the manufacturer.
TS22-EL3.5ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP32G carbide grade and the EL3.5ISO chipbreaker for reliable stainless steel turning and predictable tool life; order directly via Metav Werkzeuge or consult the technical team for application advice. TS22-EL3.5ISO WMP32G — Turning indexable insert for stainless steel, Walter Tools A TS22-EL3.5ISO WMP32G turning indexable insert engineered to provide stable chip control and extended cutting performance in the machining of stainless steel. Tiger·tec Gold coating for extended tool life Optimised EL3.5ISO chipbreaker for stainless steel WMP32G grade for medium to robust conditions Consistent edge stability in high-temperature cuts Higher productivity through focused material design The combination of the WMP32G coated carbide grade and the Tiger·tec Gold coating delivers a performance profile tailored to the demands of stainless steel machining. The grade has been developed for M‑group materials, which commonly present high toughness, tendency to build-up on the edge and elevated cutting temperatures. As a result, the insert supports a more secure chip formation and reduces unplanned interruptions. This focused design enables longer tool life and more predictable tool-change intervals, improving process efficiency on serial and single-piece turning operations. Improved process reliability with optimised chip control The EL3.5ISO chipbreaker is engineered for controlled chip formation in mid-to-heavy cutting conditions typical of austenitic and other stainless steels. Controlled chips reduce the risk of surface damage, improve coolant access and help maintain consistent contact between workpiece and tool. The practical outcome is fewer surface defects and reduced secondary finishing, which translates into a lower cost per part and steadier cycle times on production lines. Clear technical advantages for workshop planning The insert is supplied in a TS22 configuration and is suitable for tool holders that accept this geometry. The design focus on thermal stability and edge protection supports operation at the elevated temperatures that arise when machining rostfreier Stahl (stainless steel). For planners and process engineers, this means fewer unexpected tool replacements and a reduced need for very conservative cutting parameters. The carbide substrate and coating combination also help preserve the cutting edge during interrupted cuts, common in facing and profiling operations. Manufacturer quality and predictable performance Produced by a recognised brand in precision tooling, the insert benefits from proven production standards and metallurgical control. The technical make-up of the grade and the coating technology emphasise stable edge retention and consistent wear behaviour under the conditions typical for stainless steel turning. This reliability supports higher first-pass yields and gives confidence when transferring processes between machines or sites. Contact Metav Werkzeuge for tailored application advice and to request a quote for Walter Tools TS22-EL3.5ISO WMP32G inserts — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical Data Article number: TS22-EL3.5ISO-WMP32G-WALTER Product type: Drehwendeschneidplatte (turning indexable insert) Brand: Walter Tools Designation: TS22-EL3.5ISO WMP32G Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: EL3.5ISO Core Characteristics Material group application: M (stainless steel) Typical use: medium to robust cutting conditions Coating technology: Tiger·tec Gold Geometry: TS22 insert style Special features Coated carbide grade optimised for stainless steel Enhanced chip control for reduced surface damage Stable cutting edge under elevated temperatures Designed for predictable tool life and process stability FAQ Which materials is this insert intended for? The TS22-EL3.5ISO WMP32G insert is designed primarily for stainless steel (ISO group M); the WMP32G grade supports the toughness and thermal demands of these alloys. What does the EL3.5ISO chipbreaker do? The EL3.5ISO chipbreaker promotes compact, controlled chips when turning stainless steels, improving surface finish and reducing the risk of chip entanglement. Is the insert compatible with standard TS22 tool holders? The insert follows the TS22 configuration and is suitable for toolholders that accept TS22-style indexable inserts; confirm holder compatibility with the toolholder manufacturer before mounting. How does the Tiger·tec Gold coating benefit the process? The Tiger·tec Gold coating enhances heat resistance and reduces edge wear, which supports longer cutting life and more consistent machining results on stainless steel components. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarks and brand names are the property of their respective owners. Protected trademarks and trade names are mentioned for explanation only. There is no connection between our company and the listed brands. The item offered is original and factory-new.
TS22-EL4.0ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for predictable tool life and safe chip formation in stainless steels; the EL4.0ISO chipbreaker delivers stable chips under medium to robust cutting conditions. Order the insert directly via Metav Werkzeuge or consult our advisors for specification support. TS22-EL4.0ISO WMP32G – Indexable turning insert, EL4.0ISO chipbreaker, Tiger·tec Gold (Walter Tools) The TS22-EL4.0ISO WMP32G is an indexable turning insert designed for precision machining of stainless steels, optimised for medium to robust cutting applications Tiger·tec Gold coating for long life WMP32G grade for rostfreie Stähle EL4.0ISO chipbreaker for stable chips Walter Tools engineered reliability Reliable cutting performance when machining stainless steels The combination of the WMP32G carbide grade and the Tiger·tec Gold coating is engineered to manage the challenges of stainless steels, which commonly show toughness and a tendency to form built-up edge. The coated carbide substrate supports a stable cutting edge and improved wear resistance, so material removal can be achieved with consistent results. By choosing an insert with a targeted chip geometry, the machining process becomes more predictable and tool-change intervals can be planned reliably, contributing to efficient production cycles. Predictable chip control and process stability The EL4.0ISO chipbreaker is built to produce controlled chips and reduce irregularities in chip flow during turning operations. Stable chip formation lowers the risk of entanglement and secondary finishing, while the optimised geometry helps maintain surface quality under increasing thermal load. Process stability is increased because the insert’s cutting behaviour is repeatable; this supports higher first-pass yields and reduces machine idle time due to unexpected tool issues. Seamless integration into existing tooling systems Compatibility with standard toolholders is a practical advantage of this insert class. The turning insert is supplied in an industry-standard ISO designation, enabling straightforward replacement and inventory management. For workshops and production facilities seeking guidance on grade selection or clamping systems, Metav Werkzeuge’s consultants can provide specification advice based on machining parameters and component requirements, ensuring the insert is matched to the application for maximum efficiency. Durable grade for medium to robust applications The WMP32G grade, part of the Tiger·tec Gold family, is a coated carbide designed specifically for the machining of stainless steels under medium to robust conditions. Its microstructure and coating technology aim to resist edge breakdown and support continuous chip evacuation in demanding cuts. For operations where repeatable edge life and consistent surface finish are essential, this insert offers a balance between wear resistance and fracture toughness that suits a wide range of turning tasks. Consult Metav Werkzeuge for precise tool selection and application advice on Walter Tools Tiger·tec Gold WMP32G turning inserts to ensure optimal machining of stainless steels Technical data SKU: TS22-EL4.0ISO-WMP32G-WALTER Designation: TS22-EL4.0ISO WMP32G Product type: Indexable turning insert Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: EL4.0ISO Manufacturer: Walter Tools Applicable material: Stainless steels Core data No measurable data supplied Special features Coated carbide Optimised for chip control in M-material Suitable for medium to robust cutting conditions Stable cutting edge and wear resistance Tiger·tec Gold coating technology FAQ What materials is the TS22-EL4.0ISO WMP32G best suited for? The TS22-EL4.0ISO WMP32G turning insert (Walter Tools, indexable turning insert) is optimised for machining stainless steels and performs reliably under medium to robust cutting conditions. What does the WMP32G grade indicate? WMP32G denotes a Walter Tools coated-carbide grade from the Tiger·tec Gold family, selected for its wear resistance and toughness when machining rostfreie Stähle. How does the EL4.0ISO chipbreaker affect machining? The EL4.0ISO chipbreaker on the TS22-EL4.0ISO WMP32G insert promotes controlled chip formation and stable chip evacuation, improving process security and surface quality. Is this insert compatible with standard toolholders? Yes, the TS22-EL4.0ISO WMP32G follows industry-standard ISO designation for turning inserts and can be integrated into compatible indexable toolholders. When should the WMP32G grade be chosen over other grades? Choose the WMP32G grade for operations on stainless steels where a balance of wear resistance and edge stability is required, especially in medium to robust cutting scenarios. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, brand-new merchandise from the manufacturer.
TS22-EL4.5ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for stable cutting edges and reliable chip control in rostfreier Stahl turning; order via Metav Werkzeuge or consult the Metav team for application support. TS22-EL4.5ISO WMP32G indexable turning insert – Tiger·tec Gold, for rostfreier Stahl (Walter Tools) The TS22-EL4.5ISO WMP32G is an indexable turning insert engineered for medium to robust machining of rostfreier Stahl, offering a balance of wear resistance and consistent chip formation suitable for production environments. Tiger·tec Gold coated for high wear resistance Optimised chip control with EL4.5ISO geometry Designed for rostfreier Stahl machining Heat-resistant performance for consistent production The combination of the Tiger·tec Gold coating and the WMP32G grade delivers wear resistance and thermal stability that support uninterrupted production runs. In practice, the coating reduces flank and crater wear under the elevated temperatures typical when machining rostfreier Stahl, which are prone to work-hardening and high heat generation. The result is a stable cutting edge that preserves dimensional accuracy and reduces the frequency of insert changes, contributing to predictable cycle times and fewer process interruptions. Improved chip control reduces rework and downtime The EL4.5ISO chipbreaker geometry provides controlled chip formation and evacuation, which lowers the risk of built-up edge and workpiece surface damage. Reliable chip control shortens setup times and minimises secondary operations caused by poor surface quality. For workshops not specialised in metallurgy, this geometry means fewer trial adjustments and faster attainment of repeatable cutting conditions, translating into higher first-pass yields and reduced scrap rates. Productivity and tool-economy benefits for the shopfloor Selection of this insert supports a pragmatic balance between performance and economy: the coated carbide grade is aimed at medium to robust applications where long tool life and process stability matter. The insert’s construction enables quick indexing and consistent edge location, so machine uptime is maximised. Backed by Walter Tools expertise, the grade is suited to standard turning tasks in rostfreier Stahl where reliable edge retention and predictable wear behaviour are priorities for production planning and cost control. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts and ensure the right grade is specified for rostfreier Stahl turning Technical Data Article number: TS22-EL4.5ISO-WMP32G-WALTER Product name: Drehwendeschneidplatte TS22-EL4.5ISO WMP32G Walter Tools Manufacturer: Walter Tools Grade: WMP32G Series: Tiger-tec Gold Chipbreaker: EL4.5ISO Application group: M Facts Material group designation: M Suitable for rostfreier Stahl: yes Coating technology: Tiger·tec Gold Carbide type: coated carbide Special features Optimised chipformer EL4.5ISO Designed for medium to robust cutting conditions Focus on stable chip formation and edge retention Aimed at production-oriented turning tasks FAQ Is this insert suitable for machining stainless steels? The TS22-EL4.5ISO WMP32G is specifically designed for rostfreier Stahl and supports secure chip formation under the higher temperatures and ductility associated with those alloys. What does the WMP32G grade offer compared with standard grades? WMP32G, as a Tiger·tec Gold grade, combines coating technology with a robust carbide substrate to enhance wear resistance and edge stability in medium to robust conditions. How does the EL4.5ISO geometry affect machining? The EL4.5ISO chipbreaker promotes predictable chip shapes and efficient evacuation, reducing the risk of built-up edge and improving surface finish consistency. Can this insert be used for finishing operations? The insert is optimised for general turning of rostfreier Stahl; for dedicated fine finishing, a geometry specifically dedicated to finishing might be preferred, whereas this grade supports reliable mid- to heavy-duty turning. Which product reference should be quoted when ordering? Please quote SKU TS22-EL4.5ISO-WMP32G-WALTER and the product designation TS22-EL4.5ISO WMP32G to ensure correct supply. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are used for explanation only; there is no connection between our company and the mentioned brands. The item offered is an original, factory-new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TS22-EL5.0ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, proven chip control and stable edge performance to keep production running reliably when machining stainless steel; order directly via Metav Werkzeuge or consult the technical team for process-matched recommendations. TS22-EL5.0ISO WMP32G indexable turning insert for stainless steel, Tiger·tec Gold – Walter Tools The TS22-EL5.0ISO WMP32G is an indexable turning insert optimised for machining stainless steel under medium to robust conditions, combining a coated carbide grade with a dedicated chipbreaker for controlled machining. Tiger·tec Gold coating for extended tool life Optimised chip control for stainless steel machining Stable cutting edge for medium to heavy conditions Higher productivity through a coating and grade engineered for stainless steel The WMP32G grade, built on a coated carbide substrate and integrated in the Tiger·tec Gold family, is formulated to counter the typical challenges of stainless steel: toughness, adhesion tendency and high cutting temperatures. As a result, the insert delivers improved process reliability and extended tool life under recurring thermal and mechanical loads. The coated surface reduces flank wear and supports repeatable performance in series production, so machining cycles can be planned with greater confidence and fewer unplanned interruptions. Reduced machining interruptions thanks to targeted chip control The EL5.0ISO chipbreaker geometry promotes consistent chip form and evacuation when turning stainless steel, which in turn reduces risk of built-up edge and machine downtime. By actively influencing chip flow, the geometry helps to maintain surface quality and tool life even when feeds or depths of cut vary within production tolerances. For workshop environments where cycle continuity and operator safety matter, this chip control characteristic is a practical advantage that supports smoother process flows and fewer part reworks. Edge stability and wear resistance for robust turning operations The combination of a robust substrate and the Tiger·tec Gold coating provides a balance between toughness and wear resistance, enabling the insert to retain a sharp cutting edge under moderate to heavy cutting conditions. This stability translates into reproducible component accuracy and consistent surface finish across batches. In addition, the insert’s design supports economical machining: fewer index changes and predictable service intervals result in improved utilisation of machine time and tooling budgets. For process-matched recommendations or to secure the TS22-EL5.0ISO WMP32G for stainless steel applications, contact Metav Werkzeuge for tailored technical advice and delivery arrangements via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TS22-EL5.0ISO-WMP32G-WALTER Product type: Drehwendeschneidplatte / Indexable turning insert Grade: WMP32G Series: Tiger·tec Gold Manufacturer: Walter Tools Core data Material group: M (stainless steel application) Chipbreaker: EL5.0ISO Applicable standard: ISO group M Special features Coating: Tiger·tec Gold Substrate: coated carbide (WMP32G) Application: stainless steel Benefits: stable chip formation, enhanced edge life FAQ What materials is this insert designed for? The TS22-EL5.0ISO WMP32G is designed primarily for stainless steel (ISO group M), where toughness and thermal sensitivity demand a coating and grade that ensure stable chip formation and wear resistance. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WMP32G grade improves wear resistance and thermal stability, which helps the insert maintain cutting-edge integrity and reduces frequency of index changes during production runs. What role does the EL5.0ISO chipbreaker play? The EL5.0ISO chipbreaker shapes and controls chips during turning, reducing built-up edge tendency and improving evacuation, which supports consistent surface quality and fewer machining interruptions. Is this insert suitable for heavy cuts or interrupted cuts? The combination of the WMP32G substrate and Tiger·tec Gold coating provides toughness and wear resistance suitable for medium to robust cutting conditions commonly encountered in stainless steel machining. Can the TS22-EL5.0ISO WMP32G be used in automated production cells? Yes, the insert’s consistent chip control and edge stability make it suitable for automated machining where repeatable performance and predictable tool life are essential. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product from Walter Tools.
TS22-ER-N60 WMP22G WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WMP22G grade tailored for stainless steel and the ER‑N60 chipbreaker to secure stable chip formation and productive turning; order directly via Metav Werkzeuge or ask their consultants for application support. TS22-ER-N60 WMP22G indexable turning insert – Tiger‑tec Gold, Walter Tools The TS22-ER-N60 WMP22G is an indexable turning insert designed for productive machining of stainless steel under medium to robust cutting conditions. Tiger‑tec Gold coating for wear resistance WMP22G grade optimised for stainless steel ER‑N60 chipbreaker for reliable chip control Coated carbide for medium to robust conditions Confident machining of stainless steel with a tailored grade The combination of the WMP22G grade and Tiger‑tec Gold technology provides a cutting material engineered for the specific demands of stainless steel (ISO group M). This compound ensures improved edge stability and reduced tendency for built‑up edge in materials that generate heat and exhibit ductility. For turning applications where secure chip formation is essential, the insert supports consistent surface quality and predictable tool life, reducing process interruptions and rework. Longer edge life and stable cutting performance The insert's coated carbide construction and the proprietary coating technology aim to enhance wear resistance during medium to heavy operations. The result is more repeatable tool performance and fewer tool changes per production batch. When combined with suitable feeds and speeds for stainless steel, the design promotes process stability and helps maintain dimensional accuracy over longer runs, contributing directly to higher throughput and lower unit costs. Efficient chip control that speeds up production The ER‑N60 chipbreaker is optimised to produce controllable chips in a range of cutting depths common for stainless steel turning. Better chip form reduces the risk of chip entanglement at the cutting edge and in the machine, improving cycle reliability and operator safety. With improved evacuations, coolant contact and component handling become more predictable, which supports shorter cycle times and a smoother production flow. Practical integration and application guidance Designed as an indexable insert for standard toolholders in the TS22 family, the product fits existing tool systems marked TS22‑ER‑N60 and can be introduced without major fixture changes. The solution is particularly suited to workshops seeking a robust, repeatable option for challenging stainless steel parts. For application optimisation, light adjustments to feed and speed and attention to coolant strategy will further extend edge life and surface finish while maintaining productivity. For machining stainless steel with proven consistency using Tiger‑tec Gold and the WMP22G grade, contact Metav Werkzeuge for tailored advice and fast supply: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: TS22-ER-N60-WMP22G-WALTER Product type: Indexable turning insert Brand: Walter Tools Series: Tiger‑tec Gold Grade: WMP22G Facts ISO material group: M Chipbreaker: ER‑N60 Tool designation: TS22-ER-N60 WMP22G Suitable material: Stainless steel Special features Coated carbide construction Optimised for medium to robust conditions Stable chip formation and edge control Productive turning performance Designed by Walter Tools FAQ What materials is this insert intended for? The TS22-ER-N60 WMP22G insert is intended primarily for stainless steel (ISO group M) machining and performs well under medium to robust cutting conditions. How does the Tiger‑tec Gold technology benefit cutting performance? Tiger‑tec Gold coating on the WMP22G grade improves wear resistance and helps maintain a stable cutting edge when machining stainless steel, leading to more consistent tool life. What advantage does the ER‑N60 chipbreaker provide? The ER‑N60 chipbreaker produces controlled chip forms for safer evacuation and fewer machining interruptions, which supports continuous production and better surface quality. Is this insert compatible with standard TS22 toolholders? Yes, the TS22-ER-N60 designation indicates compatibility with the corresponding TS22 toolholder family for indexable turning applications. Can this insert be used for finish operations on stainless steel? With appropriate cutting parameters and tool set‑up, the WMP22G grade and ER‑N60 chipbreaker can achieve stable finishes; optimising feed and speed will enhance surface quality. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no association between our company and the named brands. The offered article is original, brand‑new merchandise from the manufacturer.
TS22-ER-N60 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of a combination of controlled chip formation, Tiger·tec Gold wear protection and a grade optimised for stainless steel to secure predictable machining results; order directly via Metav Werkzeuge or consult the technical team for application-specific setup. TS22-ER-N60 WMP32G — Turning indexable insert, Tiger·tec Gold for stainless steel | Walter Tools TS22-ER-N60 WMP32G is a robust turning insert designed for medium to robust machining of stainless steels, delivering stable cutting-edge performance and optimised chip control. Tiger·tec Gold coating for improved wear resistance WMP32G grade optimised for stainless steel machining ER‑N60 chipbreaker for controlled chip formation Reliable cutting-edge stability for medium‑robust cuts Predictable process performance through high wear resistance The insert’s WMP32G grade, built on coated carbide technology, provides consistent hardness and a protective layer that slows flank wear under elevated temperatures. That results in longer tool life and fewer interruptions in the production cycle. For machining stainless steel, where heat and work hardening can destabilise a cut, the combination of substrate and Tiger·tec Gold coating supports repeatable tool life and surface quality, reducing the need for excessive rework and unscheduled tool changes. Safer, more efficient machining thanks to controlled chip formation The integrated ER‑N60 chipbreaker is engineered to produce manageable chips in demanding material conditions. Stable chip formation reduces the risk of entanglement and improves evacuation from the cutting zone, which in turn supports uninterrupted feeds and speeds. Improved chip control contributes directly to higher process efficiency and more predictable cycle times, helping to meet production targets with fewer manual interventions. Application-focused design for stainless steel operations Selected for applications in ISO group M (stainless steels), the insert excels under medium to robust cutting parameters where workpiece toughness and heat generation are significant factors. The geometry and grade combination aim to prevent built-up edge formation and to preserve the cutting edge during extended runs. This makes the component suitable for jobbing and series production where repeatability and surface integrity are required. Integration and selection guidance for best results This indexable component is compatible with clamping systems designed for the TS22 family and should be combined with holders that ensure correct seat and rigidity. When pairing with the appropriate toolholder and cutting data, the insert helps to achieve a balance between tool life and productivity. For tailored recommendations on insert geometry, feed and speed, Metav Werkzeuge can provide application advice and cutting data to match specific workpiece conditions. Contact Metav Werkzeuge to specify the correct TS22‑ER‑N60 WMP32G configuration for the intended stainless steel application and to obtain precise cutting data and availability Technical Data Article number: TS22-ER-N60-WMP32G-WALTER SKU: TS22-ER-N60-WMP32G-WALTER Label: Drehwendeschneidplatte TS22-ER-N60 WMP32G Walter Tools Manufacturer: Walter Tools Product type: Turning indexable insert Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: ER‑N60 Material group: M (stainless steel) UID: TS22-ER-N60-WMP32G-WALTER Core data Material designation: M Suitable for: stainless steel (ISO M) Coating technology: Tiger·tec Gold Grade type: coated carbide Intended application: medium to robust machining Special features Optimised for stable chip formation in stainless steel Designed for reliable cutting-edge stability Coated substrate to extend tool life under heat Suitable for series production and repeatable processes FAQ What materials is this insert designed for? The TS22‑ER‑N60 WMP32G insert is specified for ISO group M, primarily for machining stainless steel under medium to robust cutting conditions. How does the ER‑N60 chipbreaker affect machining? The ER‑N60 chipbreaker produces controlled chips that improve evacuation and reduce the risk of entanglement, supporting safer and more continuous machining cycles with this Walter Tools insert. Is the WMP32G grade coated and why does that matter? Yes, WMP32G is a coated carbide grade utilising Tiger·tec Gold technology; the coating improves heat resistance and wear performance, which is particularly beneficial when cutting stainless steel. Can this insert be used in series production? The insert’s design and grade combination provide repeatable cutting performance suitable for both jobbing and series production where consistent surface quality and tool life are important. Which holders are compatible with this insert family? The insert is intended for holders in the TS22 family; selecting a rigid, correctly seated toolholder will help to realise the full benefits of the chipbreaker and grade. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS22-ER05ACME WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from Tiger·tec Gold reliability combined with the WMP32G grade for secure machining of rostfreier Stahl; the ER05ACME chipbreaker supports controlled chip formation and stable cutting edges under medium to robust conditions. Order the insert directly via Metav Werkzeuge or contact the consultants for material-specific guidance. TS22-ER05ACME WMP32G — Indexable turning insert, ER05ACME chipbreaker, Walter Tools (Tiger·tec Gold) A versatile TS22-ER05ACME WMP32G indexable turning insert engineered for dependable performance when machining rostfreier Stahl in medium to robust conditions Tiger·tec Gold coating for extended tool life Optimised chip control ER05ACME for reliable swarf breakage Grade WMP32G tuned for rostfreier Stahl machining Consistent edge stability under demanding cuts Greater process reliability when machining rostfreier Stahl The combination of the Tiger·tec Gold coating and the WMP32G grade provides increased process security during turning operations on rostfreier Stahl. Coated carbide technology reduces tendency to build up on the cutting edge, enabling more consistent surface quality and fewer interruptions for edge dressing. For production environments where repeatability and predictable tool life are priorities, this insert supports longer uninterrupted cycles and steadier component tolerances. Controlled chip formation and reduced cutting problems The integrated ER05ACME chipbreaker promotes effective chip control, which lowers the risk of chip entanglement and improves operator safety at elevated feed rates. Stable chip geometry contributes directly to reduced heat concentration at the cutting edge and improved wear resistance, translating into fewer insert changes and less downtime. Explained practically: the chipbreaker channels the swarf away from the cut, simplifying swarf management and protecting both workpiece and machine from adverse effects of poor chip evacuation. Practical integration into turning processes and tool systems As an indexable insert, the component fits conventional toolholders and can be introduced without complex process changes. The WMP32G grade is optimised for the specific demands of rostfreier Stahl, where toughness and heat generation are common challenges; the coating and substrate pairing were chosen to balance edge stability with fracture resistance. Process engineers will appreciate the clear assignment to ISO material group M, which aids in selecting cutting data and cooling strategies for predictable results. Request specific cutting data and application advice from Metav Werkzeuge to optimise machining with Walter Tools inserts; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: TS22-ER05ACME-WMP32G-WALTER Article designation: TS22-ER05ACME WMP32G Product type: Indexable turning insert (Drehwendeschneidplatte) Brand: Walter Tools Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER05ACME Core data Material group: M (rostfreie Stähle) Applicable ISO group: M (rostfreie Stähle) UID: TS22-ER05ACME-WMP32G-WALTER Special features Coated carbide grade (Tiger·tec Gold) Optimised for rostfreier Stahl machining Stable chip formation and edge control Suited to medium to robust cutting conditions FAQ What materials is this insert designed for? The TS22-ER05ACME WMP32G is designed specifically for machining rostfreier Stahl and is assigned to ISO material group M. How does the Tiger·tec Gold coating benefit tool life? The Tiger·tec Gold coating on the WMP32G grade improves wear resistance and reduces build-up on the cutting edge, which extends insert life under demanding conditions. Is the ER05ACME chipbreaker suitable for continuous turning operations? Yes, the ER05ACME chipbreaker promotes consistent chip control, making the insert well suited to continuous turning where reliable swarf management is required. Can the insert be used in standard toolholders? The indexable design of the TS22-ER05ACME WMP32G allows integration into conventional toolholders compatible with the TS22 geometry. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany. E‑Mail: info@walter-tools.com Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS22-ER06ACME WMP32G WMP32G Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Gold grade and the ER06ACME chipbreaker, this insert ensures reliable chip control and extended edge life when machining rostfreier Stahl; combine wear-resistant coating and a robust geometry for stable production. Order the TS22-ER06ACME WMP32G directly via Metav Werkzeuge or consult our specialists for application optimisation. TS22-ER06ACME WMP32G turning insert by Walter Tools — Tiger·tec Gold coated, ER06ACME chipbreaker TS22-ER06ACME WMP32G is a Tiger·tec Gold‑coated turning insert designed for medium to robust machining applications in rostfreier Stahl. Tiger·tec Gold coated carbide WMP32G ER06ACME chipbreaker for secure chip control Optimised for rostfreier Stahl machining Robust edge life and reproducible performance Predictable cycle times through optimised coating and geometry The combination of the Tiger·tec Gold coating and the WMP32G grade delivers high thermal resistance and improved wear behaviour, which directly increases process stability. The tailored insert geometry and the ER06ACME chipbreaker provide consistent chip formation under variable cutting conditions, reducing unexpected interruptions. This results in more predictable cycle times, fewer tool changes and higher overall machining throughput for series turning operations. Fewer changeovers thanks to extended edge life Coated cemented carbide in this specification is engineered to withstand the typical challenges of machining rostfreier Stahl, such as toughness and work hardening. The result is longer tool life and more consistent component quality during finishing and semi-finishing passes. Reduced flank wear and minimised build-up on the cutting edge translate into lower tooling consumption and improved machine uptime, making the tool an economical choice for production environments. Easier process integration with clear application guidance The insert is intended for medium to robust machining of rostfreier Stahl, where secure chip evacuation and stable cutting edges are required. The grade supports operations where higher temperatures and adhesive tendencies occur; the chipbreaker promotes short, controllable chips to protect the workpiece and toolholder. For implementation, match cutting data to material condition and machine rigidity; the insert integrates into standard turning toolholders that accept the TS22 geometry and secures repeatable results across batches. Proven brand performance for reliable results Walter Tools’ specification ensures a high degree of process security and consistent surface finish when paired with appropriate cutting parameters. The combination of proven coating technology and a chip control geometry gives engineers confidence in repeatable part quality and reduced rework. Where production reliability and repeatable tool life are priorities, this insert supports efficient and robust manufacturing workflows. For detailed application advice or to request a quotation for Walter Tools inserts such as the TS22-ER06ACME WMP32G, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration into existing turning processes. Technical Data Article number: TS22-ER06ACME-WMP32G-WALTER Label: Drehwendeschneidplatte TS22-ER06ACME WMP32G Walter Tools Brand: Walter Tools Product type: Drehwendeschneidplatte Facts Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER06ACME Material group code: M Special features Coated cemented carbide Suitability: rostfreier Stahl Application range: medium to robust machining conditions Stable chip formation and reproducible edge life FAQ What materials is this insert suited for? The TS22-ER06ACME WMP32G insert is specified for machining rostfreier Stahl and performs well under medium to robust cutting conditions. Which chipbreaker is fitted and what benefit does it bring? The insert uses the ER06ACME chipbreaker; this promotes secure, short chip formation and helps maintain a stable cutting edge during turning. How does the Tiger·tec Gold grade affect tool life? The Tiger·tec Gold technology in the WMP32G grade enhances thermal and abrasive wear resistance, extending the usable life of the insert and supporting consistent surface finishes. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS22-ER07W WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP32G grade and the ER07W chipbreaker for reproducible, productive machining of rostfreier Stahl; order directly via Metav Werkzeuge or consult the team for application advice. TS22-ER07W TS22-ER07W WMP32G – Indexable turning insert for rostfreier Stahl by Walter Tools TS22-ER07W WMP32G is an indexable turning insert engineered for demanding work on rostfreier Stahl with a Tiger·tec Gold coating and ER07W chip control Tiger·tec Gold coating for increased wear resistance Optimised for rostfreier Stahl machining ER07W chipbreaker for stable chip formation Designed for repeatable productivity and tool life High-performance coating for tougher cuts The combination of the Tiger·tec Gold coating and the WMP32G substrate provides an optimised balance of toughness and wear resistance for machining rostfreier Stahl under medium to robust cutting conditions. The advanced coating technology reduces adhesion and thermal load at the cutting edge, which supports a more predictable chip formation and minimises built-up edge. In practical terms, this means fewer interruptions in the production process and a more constant surface quality on each component. The coated carbide construction helps maintain the integrity of the cutting edge over longer tool life cycles. Stable cutting and consistent surface results Equipped with the ER07W chipbreaker, this insert ensures controlled chips and a stable cutting process when facing the challenges typical of rostfreier Stahl: high ductility, work hardening and elevated cutting temperatures. The chip geometry is tailored to evacuate material reliably, reducing the risk of entanglement and improving dimensional consistency. For workshops seeking predictable throughput and fewer scrap parts, the engineered chip control and robust edge stability translate directly into lower rework rates and improved process security. Practical production benefits and integration The ISO-style designation facilitates straightforward integration into existing toolholders and turning systems, enabling quick index changes and minimal setup time. As an indexable insert designed by Walter Tools under the Tiger·tec Gold series, it suits small-batch flexibility as well as serial production where repeatability is essential. The insert supports productive machining by extending tool life and reducing frequency of replacement, which optimises uptime and total cost of ownership. For manufacturing engineers, the result is improved cycle-time reliability and clearer planning for tool consumption and maintenance schedules. For availability and technical matching of Walter Tools Tiger·tec Gold inserts, please contact Metav Werkzeuge for application guidance and delivery options: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS22-ER07W-WMP32G-WALTER Label: Indexable turning insert TS22-ER07W WMP32G Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger·tec Gold Grade: WMP32G Facts ISO designation: TS22-ER07W WMP32G Chipbreaker: ER07W Material group code: M Special features Coating technology: Tiger·tec Gold Suitable application: rostfreier Stahl Designed for medium to robust cutting conditions Coated cemented carbide grade FAQ What materials is this insert suitable for? The TS22-ER07W WMP32G insert from Walter Tools is designed specifically for machining rostfreier Stahl and performs reliably under medium to robust cutting conditions. How does the ER07W chipbreaker affect machining? The ER07W chipbreaker on the TS22-ER07W WMP32G promotes stable chip formation and evacuation, which improves surface finish and reduces the risk of chip-related interruptions. Is the insert compatible with standard ISO toolholders? The TS22-ER07W WMP32G follows ISO-style designation conventions and is intended for use in compatible indexable turning toolholders to allow quick indexing and replacement. What are the main benefits for production environments? Using the Walter Tools Tiger·tec Gold insert provides extended tool life, more consistent cutting performance on rostfreier Stahl and reduced downtime for tool changes. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Trademarks and brand names are the property of their respective owners and are mentioned for clarification only. There is no affiliation between our company and the named manufacturers. The offered item is an original, brand-new product from the stated manufacturer.
TS22-ER1.5ISO-3 WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WMP32G grade and the ER1.5ISO-3 chipbreaker for reliable stainless steel turning; this results in stable edge life and consistent component quality. Order the indexable turning insert directly via Metav Werkzeuge or consult our specialists for process-adapted cutting data. TS22-ER1.5ISO-3 WMP32G indexable turning insert – Tiger·tec Gold for stainless steel (Walter Tools) A TS22-ER1.5ISO-3 WMP32G indexable insert engineered for secure, productive turning of stainless steels in medium to robust conditions. Tiger·tec Gold coating for extended life Optimised for stainless steels (M) ER1.5ISO-3 chipbreaker for controlled chips Consistent edge stability under load Greater process reliability for stainless steel turning The combination of the WMP32G grade and the Tiger·tec Gold technology delivers process reliability where stainless steels demand secure cutting behaviour. The insert’s coated carbide substrate and multi-layer treatment reduce the tendency to form a built-up edge, which commonly affects austenitic and duplex alloys. That translates into fewer interruptions and a lower scrap rate because the cutting edge retains its geometry longer. In practical terms, shops see more predictable tool life and fewer resets of machining parameters, supporting continuous production and reduced downstream rework. Efficient chip control that improves surface quality Designed with the ER1.5ISO-3 chipbreaker, the insert promotes reliable chip control when machining tough, heat-generating alloys. Predictable chip formation reduces the risk of entanglement, minimises tool–workpiece contact instability and aids coolant access to the cutting zone. The result is an improved surface finish and less secondary finishing, saving cycle time. For operators less familiar with carbide grades, the engineered chipbreaker supplies a stable cutting regime that lowers the need for constant parameter adjustments and helps maintain consistent part tolerances. Productivity advantages in everyday production Integrating this insert into turning operations supports higher productivity through longer intervals between indexings and fewer unscheduled tool changes. The grade’s resistance to edge degradation under thermal and mechanical load means that tooling budgets extend further without compromising part quality. Compatibility with standard holders and turning systems ensures straightforward adoption; process engineers can focus on optimising feeds and speeds rather than compensating for poor tool behaviour. The engineering behind the insert emphasises stable cutting edges and reproducible results—key factors for contract manufacturers and OEM subcontractors aiming for predictable delivery and consistent surface integrity. For process-critical stainless steel turning, rely on the Walter Tools Tiger·tec Gold solution and contact Metav Werkzeuge for tailored cutting data, application support or to request sample inserts. Technical Data Article number: TS22-ER1.5ISO-3-WMP32G-WALTER SKU: TS22-ER1.5ISO-3-WMP32G-WALTER Product type: Indexable turning insert (Drehwendeschneidplatte) Designation: TS22-ER1.5ISO-3 WMP32G Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: ER1.5ISO-3 Manufacturer: Walter Tools Facts Material group: M (stainless steels) Coating class: coated carbide (as part of Tiger·tec Gold) Typical application: medium to robust turning of stainless steels Special features Coated carbide grade optimised for stainless steel machining Tiger·tec Gold surface technology for enhanced edge life ER1.5ISO-3 chipbreaker for stable chip formation Designed for predictable cutting behaviour and surface quality FAQ What material group is this insert intended for? The TS22-ER1.5ISO-3 WMP32G insert is engineered for stainless steels (M) and performs well under the typical toughness and heat-generation of these alloys. How does the Tiger·tec Gold treatment affect performance? The Tiger·tec Gold surface technology increases resistance to edge wear and improves thermal stability, extending tool life and supporting consistent component quality. Which chipbreaker does this insert use and why is it important? This insert uses the ER1.5ISO-3 chipbreaker, providing controlled chip formation that reduces entanglement and improves surface finish during stainless steel turning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is a registered brand. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered marks are mentioned solely for clarification; there is no connection between our company and the brands named. The offered article is an original, factory-new product of the manufacturer.
TS22-ER11W-2 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of a combination of coated carbide performance and Tiger·tec Gold reliability for consistent machining of stainless steels; the ER11W-2 chipbreaker ensures controlled chip formation and stable cutting edges for uninterrupted production. Order directly via Metav Werkzeuge or ask their consultants for application support. TS22-ER11W-2 WMP32G indexable turning insert, ER11W-2 chipbreaker — Walter Tools The TS22-ER11W-2 WMP32G is a coated carbide indexable turning insert designed for machining stainless steel under medium to robust conditions, offering secure chip formation and extended tool life. Coated carbide grade WMP32G for stainless steel Tiger·tec Gold coating for enhanced wear resistance ER11W-2 chipbreaker for reliable chip control Suited to medium to robust machining conditions High-performance cutting for stainless steels The insert combines the WMP32G grade with the Tiger·tec Gold coating to deliver a balance of wear resistance and thermal stability specifically for austenitic and other stainless steel grades. This pairing reduces the risk of built-up edge and supports consistent surface finish under elevated temperatures. As a result, production runs benefit from fewer tool changes and improved process stability, making the component suitable where repeatable results and low downtime are priorities. Reliable chip control that protects the process Equipped with the ER11W-2 chipbreaker, this indexable insert promotes predictable chip formation even in sticky or work-hardening stainless steels. The controlled chips lower the chance of machine interruptions and reduce manual clearing time, contributing to higher throughput. The geometry and coating work in concert to maintain a stable cutting edge, which in turn helps keep dimensional accuracy within tight tolerances and reduces rework. Practical application advantages and process security The insert is intended for medium to robust cutting conditions in stainless steels and is compatible with standard turning toolholders that accept the TS22 designation. Its coated carbide construction is aimed at operators seeking a practical, production-oriented solution that balances tool life and surface quality. For shops looking to standardise on a reliable turning grade, this insert gives the process predictability required for batch production and mixed-series workpieces while simplifying inventory management. For robust stainless-steel turning tasks, consult Metav Werkzeuge for tailored advice on the TS22-ER11W-2 WMP32G insert — contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss applications and tooling recommendations. Technical Data Article number: TS22-ER11W-2-WMP32G-WALTER Product type: Drehwendeschneidplatte / indexable turning insert Manufacturer: Walter Tools Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER11W-2 Facts Material group: M (suitable for stainless steel) Coating: Tiger·tec Gold (coated carbide) ISO designation: TS22-ER11W-2 WMP32G SKU: TS22-ER11W-2-WMP32G-WALTER Special features Coated carbide grade WMP32G Tiger·tec Gold coating technology ER11W-2 chipbreaker geometry Designed for rostfreiem Stahl / stainless steel machining Suitable for medium to robust cutting conditions FAQ What materials is this insert suitable for? The TS22-ER11W-2 WMP32G insert is designed primarily for stainless steel (ISO group M) and performs under medium to robust machining conditions. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WMP32G grade improves wear resistance and thermal stability, which helps maintain a stable cutting edge and extends tool life during stainless-steel turning. How does the ER11W-2 chipbreaker affect machining? The ER11W-2 chipbreaker promotes controlled chip formation, reducing the risk of built-up edge and machine interruptions when machining tough or sticky stainless steels. Can this insert be used in standard TS22 toolholders? Yes, the insert follows the TS22 ISO designation and fits toolholders designed for that insert geometry, enabling straightforward integration into existing turning setups. Who manufactures this insert? This insert is manufactured by Walter Tools; the TS22-ER11W-2 WMP32G grade and Tiger·tec Gold series are part of Walter Tools’ production range. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not indicate any affiliation between our company and the named brands. The offered article is an original, factory-new product of Walter Tools.
TS22-ER12UN-2 WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of reliable chip control and extended tool life for productive stainless steel turning; the Tiger·tec Gold grade delivers stable cutting edges and consistent results under medium to robust conditions. Order the insert directly via Metav Werkzeuge or contact our consultants for application-specific recommendations. TS22-ER12UN-2 WMP32G indexable turning insert (for stainless steel) — Walter Tools The TS22-ER12UN-2 WMP32G is an indexable turning insert engineered for productive machining of stainless steel, optimised for medium to robust cutting conditions and reliable chip control. Tiger‑tec Gold coating for extended tool life WMP32G coated carbide for stainless steel machining Supports stable chip formation under robust loads Consistent edge stability for repeatable results Higher process reliability thanks to premium coating The Tiger·tec Gold technology combines a coated carbide substrate with a layered coating system that reduces flank wear and increases heat resistance. This results in longer intervals between indexings and fewer unplanned tool changes, which directly improves machine uptime. For components in the M group (stainless steels), the WMP32G grade supports secure cutting performance by resisting common issues such as work hardening and rapid edge degradation. The practical outcome is fewer rejects and more stable machining cycles. Better chip control for demanding stainless steel turning Stainless steels tend to produce long, plastic chips and generate heat at the cutting zone; the ER12UN-2 chipbreaker is designed to produce short, controllable chips and to reduce the risk of built‑up edge. Stable chip formation minimises surface damage and eases chip evacuation from the tool zone, which is particularly valuable when working in confined setups or when using higher depth of cut. The result is a more consistent surface finish and less manual intervention during production runs. Productivity gains through repeatable cutting performance An indexable approach with a reliable grade like WMP32G lowers tooling costs per part by extending effective insert life while maintaining dimensional accuracy. The insert’s balanced combination of toughness and wear resistance supports consistent edge integrity under heavier feeds or interrupted cuts, enabling higher average output without sacrificing component quality. For production environments that prioritise predictable cycles and reduced setup time, this insert contributes directly to cost‑effective machining. Contact Metav Werkzeuge for tailored cutting parameters and to secure a supply of Walter Tools Tiger·tec Gold inserts for stainless steel applications — our specialists will advise on optimal insertion and machining data Technical Data SKU: TS22-ER12UN-2-WMP32G-WALTER Article designation: TS22-ER12UN-2 WMP32G Product type: indexable turning insert Manufacturer brand: Walter Tools Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER12UN-2 Material group: M (stainless steel) Facts Suitable material: stainless steel Coating type: Tiger·tec Gold (coated carbide) Application range: medium to robust cutting conditions Article ID: TS22-ER12UN-2-WMP32G-WALTER Special features Coated carbide grade optimised for M group materials Designed for stable chip formation and reduced built‑up edge Aimed at productive turning operations with repeatable results Supports consistent edge stability and longer tool life FAQ What materials is this insert intended for? The TS22-ER12UN-2 WMP32G insert is intended primarily for stainless steel (ISO M group) machining where toughness and heat generation require a robust coated grade. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WMP32G grade enhances heat resistance and reduces flank wear, which extends effective insert life and supports more stable production cycles. What is the role of the ER12UN-2 chipbreaker? The ER12UN-2 chipbreaker promotes short, controllable chips and reduces the risk of built‑up edge, improving surface finish and facilitating safer chip evacuation in turning operations. Is this insert suitable for interrupted cuts or heavier feeds? Yes; the WMP32G coated carbide grade is engineered to maintain edge stability under medium to robust conditions, making it suitable for interrupted cuts and higher workload situations. How should one select cutting parameters for this insert? Selection of cutting data depends on the machine, workholding and stainless steel grade; for optimal results with the TS22-ER12UN-2 WMP32G, consult the tooling data sheets or contact Metav Werkzeuge for application‑specific recommendations. Manufacturer: Walter Tools (Walter AG, brand: Walter Tools). Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is part of the Sandvik Group. Protected trademarks and trade names belong to their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
TS22-ER16UN-3 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, precise ER16UN-3 chip control and suitability for machining rostfreier Stahl to maintain steady production and longer tool life; order directly via Metav Werkzeuge or consult the technical team for application advice. TS22-ER16UN-3 WMP32G indexable turning insert for rostfreier Stahl — Walter Tools, Tiger·tec Gold TS22-ER16UN-3 WMP32G is an indexable turning insert designed for medium to robust machining of rostfreier Stahl, offering a balance of wear resistance and reliable chip formation in demanding production environments Tiger·tec Gold coating for improved wear resistance Optimised for rostfreier Stahl machining ER16UN-3 chipbreaker for controlled chip formation Extended tool life through advanced coating technology The core advantage of the cutting grade lies in the Tiger·tec Gold coating combined with the WMP32G formulation, which together provide significantly improved wear resistance during continuous cutting operations. This coated carbide grade is engineered to resist abrasive and adhesive wear common when machining rostfreier Stahl, thereby reducing the frequency of insert changes. For production settings where cycle times and repeatable surface finish matter, the enhanced resistance translates into more predictable tool life and lower overall machining interruptions. Stable chips and consistent process reliability Efficient chip control is delivered by the ER16UN-3 chipbreaker, which promotes stable chip formation under the typical heat and ductility conditions of rostfreie Stähle. Stable chips lower the risk of built-up edge and reduce the need for machine stoppages to clear swarf, improving throughput and surface integrity. The insert geometry and chip management together ensure consistent cutting performance across varying feed rates and moderate to sturdy cutting conditions, supporting reproducible part quality. Practical productivity gains for day-to-day workshop use Integration into existing toolholders is straightforward and the insert’s specifications support a wide range of turning applications in production workshops. By favouring a grade focused on secure chip formation and edge stability, maintenance intervals are extended and process reliability is enhanced. The balance of wear resistance and chip control supports a tangible improvement in machining efficiency, making the insert a practical choice for job shops and manufacturing lines that require steady productivity when working with rostfreier Stahl. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts or to request detailed machining data at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: TS22-ER16UN-3-WMP32G-WALTER Product name: TS22-ER16UN-3 WMP32G indexable turning insert Manufacturer: Walter Tools Core specifications Grade: WMP32G Series/coating: Tiger·tec Gold Chipbreaker: ER16UN-3 Material group: M (rostfreie Stähle) Special features Coated carbide Optimised for rostfreier Stahl Stable chip formation FAQ What materials is this insert suited for? The TS22-ER16UN-3 WMP32G cutting grade is optimised for machining rostfreier Stahl and is specified for medium to robust operating conditions. How does the Tiger·tec Gold coating benefit workshop performance? The Tiger·tec Gold coating on the WMP32G grade increases wear resistance and supports longer tool life when turning rostfreier Stahl, leading to fewer insert changes and steadier production. What role does the ER16UN-3 chipbreaker play? The ER16UN-3 chipbreaker ensures controlled chip formation and reduces the likelihood of built-up edge during operations with ductile and heat-prone materials such as rostfreier Stahl. Is this insert compatible with standard toolholders? The insert is designed for standard indexable turning applications; details on holder compatibility and clamping should be checked against the holder specifications and the TS22-ER16UN-3 WMP32G geometry. Protected trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only; no affiliation with the manufacturers is implied. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TS22-ER2.0ISO-2 WMP32G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the WMP32G grade for dependable machining of rostfreier Stahl; the geometry and chipbreaker ensure stable chip formation and consistent productivity. Order genuine Walter Tools inserts directly via Metav Werkzeuge or request tailored cutting data from our consultants. TS22-ER2.0ISO-2 WMP32G indexable turning insert — Tiger·tec Gold for rostfreier Stahl, Walter Tools TS22-ER2.0ISO-2 WMP32G is an indexable turning insert designed for secure chip control and reliable edge stability when machining rostfreier Stahl in medium to robust conditions. Tiger·tec Gold coating for longer life WMP32G grade optimised for rostfreier Stahl ER2.0ISO-2 chipbreaker for secure chip formation High process security and stable cutting edge Consistent performance on rostfreier Stahl for reduced rework The TS22-ER2.0ISO-2 WMP32G insert combines the Tiger·tec Gold coating with the WMP32G grade to tackle the specific challenges of rostfreier Stahl: material toughness, tendency to form built-up edge and heat generation. The insert’s ER2.0ISO-2 chipbreaker is engineered to promote predictable chip formation, which reduces the risk of surface damage and secondary operations. For shops focused on repeatable throughput, this means fewer interruptions and a steadier production rhythm. Improved tool life and process security that raise productivity A coated, carbide-based grade such as WMP32G delivers a balance between wear resistance and edge robustness; this supports a stable cutting edge under varying cutting conditions. The result is higher process security — fewer edge failures and longer periods between index changes. For manufacturers, this converts into lower tooling-related downtime and more consistent part quality, making the insert a pragmatic choice for serial production where uptime matters. Practical machining use and clear handling benefits The designation ER2.0ISO-2 identifies the intended chip control geometry and its suitability for tougher materials; it should be selected where controlled chip evacuation is required. As an indexable turning insert, the component fits standard toolholders compatible with the TS22 family and allows quick indexing when one corner is worn. This leads to lower handling time compared with brazed solutions and simplifies spare-part management on the shop floor. For engineers seeking documented performance, the technology is optimised for rostfreier Stahl in medium to robust applications and supports stable, economic machining. Contact Metav Werkzeuge for tailored cutting parameters, availability of genuine Walter Tools Tiger·tec Gold inserts and expert application advice. Technical Data Article number: TS22-ER2.0ISO-2-WMP32G-WALTER Designation: TS22-ER2.0ISO-2 WMP32G Product type: indexable turning insert Manufacturer: Walter Tools Core data Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER2.0ISO-2 Material group: M Suitable for: rostfreier Stahl (ISO group M) Special features Coating technology: Tiger·tec Gold Stable chip formation Optimised for medium to robust conditions High process security and consistent cutting edge Applicable to rostfreier Stahl machining FAQ What materials is this insert intended for? The TS22-ER2.0ISO-2 WMP32G insert and its WMP32G grade are designed primarily for machining rostfreier Stahl, covering medium to robust cutting conditions where secure chip control is essential. What does the ER2.0ISO-2 designation indicate? ER2.0ISO-2 denotes the chipbreaker geometry aimed at predictable chip formation and evacuation; in practice it supports safer machining of tougher alloys and helps maintain surface integrity. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating improves wear resistance and heat management at the cutting edge, which extends tool life and contributes to steadier productivity and fewer interruptions for insert changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is a leading manufacturer of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names belong to their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer Walter Tools.
TS22-ER3.5ISO WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, the WMP22G grade tuned for stainless steels and the ER3.5ISO chipbreaker for consistent chip control; the result is reliable, productive turning with fewer interruptions. Order the TS22-ER3.5ISO WMP22G directly via Metav Werkzeuge or ask our consultants if needed. TS22-ER3.5ISO WMP22G Indexable Turning Insert – Tiger·tec Gold, for stainless steels | Walter Tools A TS22-ER3.5ISO WMP22G indexable turning insert designed for robust and repeatable machining of stainless steels in medium to demanding cutting conditions. Tiger·tec Gold coated carbide grade WMP22G Optimised for stainless steels (material group M) ER3.5ISO chipbreaker for stable chip control Walter Tools engineered for process security Consistent performance on stainless steels The Tiger·tec Gold coating and the WMP22G carbide grade combine to deliver improved wear resistance and a stable cutting edge when machining austenitic and other rostfreie Stahl grades. The coating technology reduces adhesion tendencies and thermal softening at the cutting zone, which helps prevent built-up edge and keeps surface finish consistent. In practice, this means fewer unscheduled tool changes and more predictable component quality in serial turning operations. Controlled chips and reduced rework The integrated ER3.5ISO chipbreaker is developed to produce short, controllable chips when turning stainless steels under medium to robust conditions. Reliable chip formation reduces the risk of entanglement, keeps the work area cleaner and speeds up unattended cycles. For production environments, the net effect is greater uptime and a lower rate of rework, supporting leaner workflows and a steadier output rate. Engineered for repeatability and process security Manufactured to Walter Tools standards, this insert offers a coated carbide construction suited to the thermal and material challenges of machining rostfreie Stähle. The grade and coating pairing support a stable cutting edge over longer runtimes, which improves reproducibility from component to component. For operations where dimensional consistency and surface quality matter, the insert contributes to tighter process windows and more reliable machining outcomes. Application guidance and toolroom integration The TS22-ER3.5ISO designation provides a clear reference for selecting compatible tool holders and insert pockets. The geometry and chipbreaker are applicable in common turning setups for stainless steels and are particularly useful where a balance between material removal rate and tool life is required. For shops upgrading from general-purpose grades, this insert offers a practical route to increase productivity without radical changes to existing fixturing or clamping strategies. Contact Metav Werkzeuge today for tailored advice on integrating the TS22-ER3.5ISO WMP22G into production, or to request cutting-data recommendations and availability information. eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: TS22-ER3.5ISO-WMP22G-WALTER Article designation: TS22-ER3.5ISO WMP22G Product type: Indexable turning insert Brand: Walter Tools Series: Tiger·tec Gold Facts Grade: WMP22G Material group: M (stainless steels) Chipbreaker: ER3.5ISO Coating type: Tiger·tec Gold (coated carbide) Special features Coated carbide grade developed for rostfreie Stähle Stable cutting edge and improved wear resistance Designed for medium to robust cutting conditions Optimised chip control for reliable production FAQ What materials is this insert designed for? The TS22-ER3.5ISO WMP22G is designed primarily for rostfreie Stähle (material group M) and is optimised for the specific demands of stainless-steel turning. How does the Tiger·tec Gold coating benefit tool life? The Tiger·tec Gold coating on the WMP22G grade improves wear resistance and reduces adhesion at the cutting edge, which helps extend usable tool life under the heat and strain typical of stainless-steel machining. What is the purpose of the ER3.5ISO chipbreaker? The ER3.5ISO chipbreaker promotes short, controllable chips during turning, aiding chip evacuation and reducing the likelihood of chip-related interruptions in production when turning rostfreie Stähle. Is this insert suitable for high-production environments? Yes. The combination of the WMP22G grade and Tiger·tec Gold coating provides process security and consistent performance that supports higher production uptime in serial turning operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
TS22-ER3.5ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP32G grade and the ER3.5ISO chipbreaker for reliable machining of stainless steel; the insert delivers consistent edge life and stable chip control to keep production running smoothly. Order or request consultation via Metav Werkzeuge for application support and fast availability. TS22-ER3.5ISO WMP32G indexable turning insert – Walter Tools, for stainless steel machining The TS22-ER3.5ISO WMP32G is an indexable turning insert engineered for machining stainless steel under medium to robust cutting conditions, combining Tiger·tec Gold coating technology with an ER3.5ISO chipbreaker for secure chip formation. Tiger·tec Gold coating for extended tool life WMP32G grade optimised for stainless steel ER3.5ISO chipbreaker for stable chip control High-performance machining for demanding stainless applications The insert is built on a coated carbide substrate and the Tiger·tec Gold technology, delivering higher wear resistance and thermal stability compared with uncoated alternatives. This results in a stable cutting edge that tolerates the adhesive tendencies and heat generation typical of stainless steel. The combination of grade and coating supports longer tool life under interrupted or continuous cuts, reducing the frequency of insert changes and contributing to more predictable machining cycles. The engineered surface finish of the coating also assists in lowering friction at the cutting zone, which can improve surface quality while maintaining cutting efficiency. Predictable process reliability and productivity gains By pairing the WMP32G grade with an ER3.5ISO chipbreaker, the insert provides controlled chip formation and evacuation, which decreases risk of built-up edge and workpiece damage. Stable chip behaviour shortens machine idle time and simplifies chip handling in automated cells, improving overall process reliability. For production planners, the technical benefit translates into higher uptime and better reproducibility: fewer stoppages for insert changes and steadier cycle times. The result is a measurable uplift in productivity and a favourable cost-in-use profile for series production of corrosion-resistant alloys. Material suitability and recommended cutting conditions The insert is specified for the ISO material group M (stainless steel), designed to manage the typical challenges of these alloys—toughness, tendency to gall and heat concentration. The WMP32G grade is optimised for medium to robust conditions, making it suitable for parts that require a balance between aggressive material removal and surface integrity. The ER3.5ISO chipbreaker is tailored to produce short, controllable chips in a broad range of feeds and depths, reducing secondary operations and improving operator safety. Where finishes or tight tolerances are required, the improved edge stability helps maintain dimensional accuracy over extended tool life. Contact Metav Werkzeuge today for sample availability, grade selection advice and application-specific recommendations for Walter Tools Tiger·tec Gold inserts Technical Data SKU: TS22-ER3.5ISO-WMP32G-WALTER Designation: TS22-ER3.5ISO WMP32G Type: indexable turning insert Manufacturer: Walter Tools Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER3.5ISO Material group: M (stainless steel) Facts Suitable material group: M Application range: medium to robust conditions Coating technology: Tiger·tec Gold Substrate: coated carbide Special features Optimised for stable chip formation Increased wear resistance and thermal stability Consistent cutting-edge behaviour Designed for improved process reliability FAQ What materials is this insert designed for? The TS22-ER3.5ISO WMP32G insert is designed primarily for ISO group M, i.e. stainless steel, and performs best in medium to robust machining conditions. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold on the WMP32G grade increases wear resistance and thermal stability, helping the insert maintain a stable cutting edge and longer life in demanding stainless-steel operations. What benefit does the ER3.5ISO chipbreaker provide? The ER3.5ISO chipbreaker produces controlled, short chips that improve chip evacuation and reduce the risk of built-up edge, supporting safer and more predictable machining cycles with the Walter Tools insert. Can the insert be used for finishing as well as roughing? The WMP32G grade and ER3.5ISO geometry suit a range of conditions; they are particularly effective where a balance between material removal and surface quality is required, though final selection depends on specific feed and speed parameters. Walter Tools is a brand of Walter AG, part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners and are cited solely for explanation. The offered article is an original, factory-new product of the manufacturer.
TS22-ER4.0ISO WMP22G Wendeplatten - Walter Tools
Combining Tiger‑tec Gold coating, the WMP22G grade and the ER4.0ISO chipbreaker results in reliable chip formation and consistent cutting-edge stability for stainless‑steel turning. Order the TS22-ER4.0ISO WMP22G insert directly via Metav Werkzeuge or ask our consultants if needed. TS22-ER4.0ISO WMP22G indexable turning insert, Tiger‑tec Gold – Walter Tools The TS22-ER4.0ISO WMP22G is an indexable turning insert engineered for machining stainless steel in medium to robust cutting conditions, offering a balance of wear resistance and chip control. Tiger‑tec Gold coating for long tool life Optimised for machining stainless steel (M) ER4.0ISO chipbreaker for stable chip control Coated carbide grade WMP22G for robust performance Predictable chip control for safer stainless‑steel turning The combination of the ER4.0ISO chipbreaker with the WMP22G grade is designed to promote stable chip formation when machining stainless steel, a material group prone to work hardening and stringy chips. Stable chips reduce the risk of built-up edge and interrupted cuts, which in turn helps to maintain a consistent surface finish and lowers the likelihood of unscheduled tool changes. This results in improved uptime and a more predictable production rhythm, particularly in processes that demand repeatable quality under medium to robust conditions. Longer tool life and consistent productivity The insert’s Tiger‑tec Gold coating supports abrasion resistance and edge stability during demanding operations. As a coated carbide grade, WMP22G is optimised to withstand the thermal and mechanical stresses typical for stainless‑steel turning. The direct benefit is longer tool life and fewer indexings, which reduces handling time and contributes to lower overall machining costs per part. For operations prioritising throughput and reproducibility, the grade’s behaviour provides a measurable improvement in process economy without sacrificing component quality. Seamless integration with existing turning systems Designed as an indexable turning insert, this product fits standard toolholders and can be introduced into established turning cells with minimal adaptation. The insert’s geometry and chipbreaker are chosen to balance cutting forces and chip evacuation, helping to preserve machine stability and toolholder life. Clear classification as material group M simplifies grade selection: shops processing rostfreier Stahl can standardise on this solution for a range of components, reducing tool variety while maintaining process security and surface consistency. Application advice and practical support for machining decisions For customers planning new production runs or process optimisation, the technical characteristics of the insert allow straightforward selection of cutting parameters for medium to robust operations. Metav Werkzeuge provides application guidance and can supply recommended cutting speeds and feed ranges based on workshop conditions and component geometry. If further clarification is required regarding compatibility with specific tool holders or turning strategies, consult the technical team for tailored recommendations to achieve the best combination of process security and part quality. Contact Metav Werkzeuge for tailored advice on Walter Tools Tiger‑tec Gold inserts and precise cutting-parameter recommendations — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS22-ER4.0ISO-WMP22G-WALTER Label: Drehwendeschneidplatte TS22-ER4.0ISO WMP22G Walter Tools Product type: Indexable turning insert Manufacturer: Walter Tools Core characteristics Grade: WMP22G Series: Tiger‑tec Gold Chipbreaker: ER4.0ISO Material group: M (stainless steel) Special features Coated carbide grade for improved wear resistance Optimised for medium to robust cutting conditions Designed for stable chip formation and edge stability Suitable for turning applications on stainless steel FAQ Which materials can be machined with this insert? The TS22-ER4.0ISO WMP22G insert is specified for material group M and is therefore suitable for machining stainless steel, particularly in applications that require stable cutting under medium to robust conditions. What role does the ER4.0ISO chipbreaker play in performance? The ER4.0ISO chipbreaker is engineered to produce controllable chips during stainless‑steel turning, supporting consistent evacuation and reducing the risk of built-up edge, which helps to maintain surface finish and process stability. Is the WMP22G grade suitable for continuous production runs? Yes, the WMP22G coated carbide grade, as part of the Tiger‑tec Gold series, is developed to provide reliable tool life and repeatable performance, making it appropriate for extended production where consistency is required. Can this insert be used for both finishing and roughing operations? The insert is optimised for medium to robust conditions; with appropriate cutting data adjustments it can be applied across a range of turning tasks. For fine finishing, adjustments to feeds and speeds are recommended to match the required surface quality. How does this Walter Tools insert support process reliability? By combining a wear‑resistant coated carbide grade with an effective chipbreaker geometry, the insert promotes edge stability and controlled chip formation, which together reduce variability in machining results and enhance overall process reliability. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
TS22-ER4.0ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger‑tec Gold surface engineering and the WMP32G coated carbide grade for reliable machining of rostfreier Stahl; a compact, high‑performance solution that supports stable chip formation and extended tool life. Order directly via Metav Werkzeuge or consult the team for specification advice. TS22-ER4.0ISO WMP32G – indexable turning insert, Tiger‑tec Gold, Walter Tools The TS22-ER4.0ISO WMP32G is an indexable turning insert designed for medium to robust machining of rostfreier Stahl, offering enhanced chip control through the ER4.0ISO chipbreaker and the Tiger‑tec Gold coating. Tiger‑tec Gold coating for extended life Optimised chip control with ER4.0ISO chipbreaker Coated carbide grade WMP32G for robust use Greater process security through engineered coating and grade The combination of Tiger‑tec Gold surface technology and the WMP32G coated carbide grade delivers a measurable improvement in process security when machining rostfreier Stahl. Coated carbide reduces adhesive wear and helps to maintain a stable cutting edge under the elevated temperatures typical for these alloys. The result is fewer interruptions for tool changes and more consistent part quality. For production environments where predictable tool life and repeatability are priorities, this engineered surface treatment supports efficient, uninterrupted machining. Consistent chip control for safer, faster turning operations The ER4.0ISO chipbreaker is tailored to assist controlled chip formation in demanding materials; it segments and evacuates chips to reduce the risk of built‑up edge and workpiece surface damage. Improved chip control not only lowers rework rates but also enhances operator safety and machine uptime. Explaining the technical term: a chipbreaker modifies the geometry at the cutting edge so that chips curl and break reliably instead of forming long, stringy swarf — a practical advantage on bar feeders and turning centres processing rostfreier Stahl under medium to robust conditions. Practical guidance for tooling decisions and set‑up When selecting an indexable insert for demanding turning tasks, prioritise a combination of cut‑resistant grade and an appropriate chipbreaker. The coated carbide composition of this Walter Tools grade supports stable performance during interrupted cuts and higher heat loads. For best results, pair the insert with a holder that provides secure clamping and set cutting parameters conservatively at first, then increase feeds to find the optimal balance between productivity and tool life. This approach helps to leverage the insert’s attributes — coated carbide, Tiger‑tec Gold, and optimised chip control — to deliver consistent component quality. For tailored selection advice or to secure supply of Walter Tools inserts with Tiger‑tec Gold technology, contact Metav Werkzeuge for application support and prompt delivery coordination. Technical data Article number: TS22-ER4.0ISO-WMP32G-WALTER Product: Indexable turning insert (Drehwendeschneidplatte) Series: Tiger‑tec Gold Grade: WMP32G Chipbreaker: ER4.0ISO Manufacturer: Walter Tools Facts ISO designation: TS22-ER4.0ISO WMP32G Material group compatibility: M (rostfreier Stahl) Coating type: coated carbide Intended use: medium to robust machining conditions Special features Coated carbide grade WMP32G Tiger‑tec Gold surface engineering Stabilised cutting edge for consistent performance Optimised chip control with ER4.0ISO chipbreaker Suitable for turning operations in workshop and small series production FAQ What materials is this insert suitable for? The TS22-ER4.0ISO WMP32G insert is designed primarily for rostfreier Stahl (material group M) and is optimised for medium to robust cutting conditions with stable chip formation. How does the Tiger‑tec Gold coating improve performance? Tiger‑tec Gold on the WMP32G grade reduces adhesive wear and helps preserve the cutting edge under elevated temperatures, improving the insert’s lifetime and consistency in production. What is the function of the ER4.0ISO chipbreaker? The ER4.0ISO chipbreaker promotes controlled chip segmentation and evacuation, minimising long chips and reducing the risk of built‑up edge when machining rostfreier Stahl. Is this insert suitable for high‑volume production? Yes, the combination of a coated carbide grade and Tiger‑tec Gold surface engineering makes the insert well suited to demanding serial production where tool life and process reliability are important. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
TS22-ER4.0TR WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of a proven combination of Tiger·tec Gold coating and an ER4.0TR chipbreaker for reliable chip control and extended edge life in rostfreier Stahl applications; order the insert via Metav Werkzeuge or consult our specialists for process matching. TS22-ER4.0TR WMP32G turning insert – Tiger·tec Gold for rostfreier Stahl (Walter Tools) TS22-ER4.0TR WMP32G is an indexable turning insert designed for medium to robust machining of rostfreier Stahl, offering a coated-carbide grade optimised for secure chip formation. Tiger·tec Gold coated for long tool life ER4.0TR chipbreaker for stable chip control Designed for rostfreier Stahl machining (M) Walter Tools precision and reliability Improved productivity through controlled chip formation The Tiger·tec Gold coating paired with an ER4.0TR chipbreaker delivers consistent chip control, which reduces downtime caused by chip-related interruptions. By promoting predictable chip shapes and evacuation, the insert supports higher uninterrupted cutting times and steadier cycle rates. This creates a measurable improvement in throughput and process repeatability for shops processing rostfreier Stahl under medium to robust conditions, translating directly into greater machine utilisation and reduced secondary handling. Longer edge life and process stability for tough materials The WMP32G grade is a coated carbide designed specifically to handle the thermal and mechanical demands of rostfreier Stahl. The coating technology improves wear resistance and helps to avoid built-up edge, while the substrate retains toughness to withstand intermittent cutting loads. For engineers and operators less familiar with coating technology, this means the insert maintains a stable cutting edge for longer intervals, reducing the need for frequent index changes and contributing to predictable tool-change scheduling in production. Seamless integration into production and clear application guidance The insert is suitable for conventional and CNC turning operations where medium to robust cutting parameters are required. Its geometry and grade are chosen to balance wear resistance and toughness, facilitating a controlled transition from roughing to finishing passes when process conditions demand it. For process selection and parameter setting, Metav Werkzeuge can provide application support and cutting data to match the Walter Tools grade to specific rostfreier Stahl alloys, helping to achieve the expected surface finish and tool life in daily operation. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and application support — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: TS22-ER4.0TR-WMP32G-WALTER Label: Drehwendeschneidplatte TS22-ER4.0TR WMP32G Walter Tools Series: Tiger-tec Gold Grade: WMP32G Chipbreaker: ER4.0TR Material group: M (rostfreier Stahl) Brand: Walter Tools Facts Chipbreaker designation: ER4.0TR Grade designation: WMP32G Series name: Tiger-tec Gold Special features Coated carbide grade optimised for rostfreier Stahl machining Engineered for stable chip formation and reduced built-up edge Balanced toughness for medium to robust cutting conditions Suitable for turning operations in conventional and CNC machines FAQ What materials is this insert intended for? The TS22-ER4.0TR WMP32G insert is intended primarily for rostfreier Stahl (material group M), with the WMP32G grade tuned for secure chip formation when machining such alloys. What does the Tiger·tec Gold designation mean for tool life? Tiger·tec Gold denotes the coating technology and grade that enhance wear resistance and edge stability; the combination helps prolong tool life compared with uncoated or conventional grades in rostfreier Stahl turning. Which chipbreaker is integrated and what benefit does it provide? The ER4.0TR chipbreaker is integrated to promote stable chip control and evacuation, reducing interruption risk and supporting longer uninterrupted cutting times in turning operations. Is this insert suitable for both roughing and finishing passes? Yes, the geometry and grade of the insert provide a balance between toughness and wear resistance, allowing its use across medium to robust roughing and finishing scenarios in rostfreier Stahl processing. Who manufactures this insert and what can be expected from the brand? This insert is supplied under the Walter Tools name; the brand is known for precision tooling and consistent production performance suitable for demanding turning applications. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are cited solely for explanation. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
TS22-ER4.5ISO WMP32G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the WMP32G grade delivers reliable wear resistance and stable chip formation for machining stainless steel; the integrated ER4.5ISO chipbreaker supports controlled chips under medium to robust conditions. Order the TS22-ER4.5ISO WMP32G directly via Metav Werkzeuge or ask our consultants if needed. TS22-ER4.5ISO WMP32G — indexable turning insert for stainless steel, Walter Tools The TS22-ER4.5ISO WMP32G is a precision indexable turning insert designed for turning applications in stainless steel, combining a dedicated chipbreaker geometry with the Tiger·tec Gold coating for enhanced process stability. Tiger·tec Gold coating for high wear resistance Optimised chipbreaker ER4.5ISO for stainless steel Coated carbide grade WMP32G for stable cutting edge Walter Tools quality and process reliability Controlled chip flow for reliable stainless steel turning The ER4.5ISO chipbreaker is engineered to promote stable chip formation when machining stainless steel, a group of materials that typically tend to be tough and prone to work hardening. By directing chip flow and breaking long, stringy chips into manageable segments, the insert reduces the risk of built-up edge and improves surface consistency. The combination of chip geometry and the insert’s substrate ensures repeatable performance in medium to robust cutting conditions, supporting uninterrupted production runs and fewer machine stops for chip clearing. Longer edge life thanks to coating and grade technology The Tiger·tec Gold coating applied to the WMP32G grade enhances resistance against abrasion and adhesion mechanisms commonly encountered with stainless steel. The result is improved wear resistance and a more durable cutting edge under thermally demanding conditions. Coated carbide substrates balance toughness and hardness to keep the cutting edge intact during intermittent or continuous cuts, which helps to lower tooling costs per component and sustain consistent part quality over longer tool life cycles. Practical machining guidance for predictable results Stainless steel often requires deliberate cutting parameter selection to avoid work hardening and temperature-related issues. The ER4.5ISO chipbreaker on this insert assists by encouraging favourable chip segmentation and removing material efficiently. For best results, pair the insert with appropriate toolholders and stable setups; ensure coolant strategy and feed rates suit the chosen depth of cut. While exact cutting data depends on machine and workpiece conditions, this grade is intended for medium to robust machining tasks where secure chip control and edge stability are priorities. Production benefits and process reliability in daily use Choosing an insert from Walter Tools’ Tiger·tec Gold family supports consistent manufacturing output through process reliability and reproducible results. Improved chip control and enhanced wear properties reduce rework and downtime, translating into measurable gains in throughput and overall productivity. The combination of a purpose-built chipbreaker, a coated carbide grade, and a globally recognised brand contributes to easier tool selection and predictable machining performance on stainless steel components. For project-specific recommendations on the Walter Tools TS22-ER4.5ISO WMP32G and to discuss optimal application parameters for stainless steel, contact Metav Werkzeuge at +49 2822 7131930 or info@metav-werkzeuge.com for personalised consultation and supply options Technical data Article number: TS22-ER4.5ISO-WMP32G-WALTER Label: Drehwendeschneidplatte TS22-ER4.5ISO WMP32G Walter Tools Manufacturer: Walter Tools Product type: indexable turning insert Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: ER4.5ISO Material group: M (stainless steel) Facts No measurable characteristics available in the provided data Special features Coating technology: Tiger·tec Gold Grade type: coated carbide (WMP32G) Suitable for: stainless steel Chip control: ER4.5ISO Brand: Walter Tools FAQ What materials is this insert suitable for? The TS22-ER4.5ISO WMP32G is specified for machining stainless steel and is optimised for materials that require secure chip control and stable cutting edges. What does the ER4.5ISO chipbreaker do? The ER4.5ISO chipbreaker promotes controlled chip segmentation during turning, improving chip evacuation and reducing tendencies to form long, disruptive chips when machining stainless steel. How does the Tiger·tec Gold coating benefit the WMP32G grade? The Tiger·tec Gold coating increases surface hardness and reduces adhesion, delivering improved wear resistance and longer edge life for the WMP32G grade under thermally demanding cutting conditions. Is this insert intended for light or robust cutting conditions? The WMP32G grade and ER4.5ISO chipbreaker are suited to medium to robust machining of stainless steel, offering a balance between toughness and wear resistance for reliable production. Which brand manufactures this insert and what can be expected in terms of quality? The insert is from Walter Tools; the TS22-ER4.5ISO WMP32G reflects Walter Tools’ emphasis on process reliability and consistent cutting performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation with our company. The item offered is an original, factory-new product from the manufacturer.
TS22-ER5.0ISO WMP22G WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and an optimised ER5.0ISO chipbreaker for stable cutting performance in rostfreier Stahl. The insert delivers reliable edge life and consistent chip control for medium to robust turning tasks — order directly via Metav Werkzeuge or consult our technical team for application support. TS22-ER5.0ISO TS22-ER5.0ISO WMP22G turning insert for rostfreier Stahl (Tiger‑tec Gold) by Walter Tools A TS22-ER5.0ISO WMP22G turning insert engineered to provide secure chip control and extended tool life when machining rostfreier Stahl under medium to robust conditions. Tiger‑tec Gold coating for extended life Optimised ER5.0ISO chip control Designed for rostfreier Stahl (ISO M) Consistent cutting performance with advanced coating technology The combination of Tiger·tec Gold technology and a coated carbide base provides a balance of wear resistance and toughness that supports longer tool life in demanding turning operations. Designed specifically for machining rostfreier Stahl, the grade promotes stable cutting edges and reduces the tendency for built‑up edge that commonly occurs with tough, high‑alloy stainless materials. This results in fewer interruptions for insert changes and a more predictable process flow, supporting higher overall productivity on batch and single‑piece runs. Secure chip control that stabilises the process The ER5.0ISO chipbreaker is engineered to produce short, evacuable chips in common rostfreier Stahl turning applications, reducing the risk of entanglement and tool damage. Improved chip control lowers heat concentration at the cutting zone and helps maintain a consistent cutting geometry during the cut, which in turn benefits surface finish and dimensional repeatability. For production environments where process reliability matters, the chip management advantage directly contributes to reduced rework and downtime. Application focus and practical benefits for workshop use As a member of the Tiger‑tec Gold family, this insert is intended for medium to robust cutting conditions and is particularly well suited to components where corrosion‑resistant alloys are specified. The coated carbide chemistry of the grade supports repeatable edge stability across varied batch sizes, making the insert a practical choice for job shops and OEM machining cells alike. By prioritising stable performance in rostfreier Stahl, the insert helps maintain consistent part quality with fewer process adjustments. Economic and operational advantages in production By combining reliable edge life, predictable chip behaviour and a design tuned to rostfreier Stahl, the insert helps lower overall machining costs through reduced tool consumption and fewer interruptions. The controlled chips simplify machine housekeeping and the improved edge stability contributes to consistent surface integrity, supporting downstream processes. For facilities seeking a pragmatic balance of productivity and process security, this solution is positioned to deliver measurable benefits in everyday production. Contact Metav Werkzeuge for tailored application advice and availability of the Walter Tools TS22-ER5.0ISO WMP22G insert — our consultants provide practical recommendations and stock information to support machining needs. Technical data Article number: TS22-ER5.0ISO-WMP22G-WALTER Label: Drehwendeschneidplatte TS22-ER5.0ISO WMP22G Walter Tools Series: Tiger‑tec Gold Grade: WMP22G Chipbreaker: ER5.0ISO Material group: M (rostfreier Stahl) Manufacturer: Walter Tools Facts ISO group: M Special features Coating technology: Tiger·tec Gold Substrate: coated carbide (beschichtetes Hartmetall) Intended application: rostfreier Stahl (ISO M) Typical use: medium to robust turning conditions Designation: TS22-ER5.0ISO WMP22G Brand: Walter Tools FAQ What materials is this insert suitable for? The TS22-ER5.0ISO WMP22G insert from Walter Tools is specified for machining rostfreier Stahl (ISO group M) and is optimised to manage the specific chip and heat challenges of these alloys. How does the Tiger·tec Gold technology benefit tool life? Tiger·tec Gold coating on the WMP22G grade enhances wear resistance and edge robustness, which in the TS22-ER5.0ISO insert leads to more consistent tool life and fewer insert changes during production. What is the role of the ER5.0ISO chipbreaker? The ER5.0ISO chipbreaker delivers short, controlled chips during turning, improving chip control and reducing the risk of chip entanglement and workpiece surface damage when machining rostfreier Stahl. Is this insert suitable for high‑volume production? Yes, the combination of a wear‑resistant coating and a stable cutting edge makes the TS22-ER5.0ISO WMP22G insert by Walter Tools a practical option for both batch production and continuous machining where process reliability is important. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any connection between our company and the named manufacturers. The offered article is an original, factory‑new product of the manufacturer Walter Tools.
TS22-ER5.0ISO WMP32G Wendeplatten - Walter Tools
Taking advantage of the combination of Tiger·tec Gold coating, the WMP32G grade and a geometry optimised for secure chip formation, this insert offers stable cutting performance in rostfreier Stahl applications; order through Metav Werkzeuge or consult the specialists for selection and availability. TS22-ER5.0ISO WMP32G indexable turning insert for rostfreier Stahl — Walter Tools TS22-ER5.0ISO WMP32G is an indexable turning insert designed for robust machining of rostfreier Stahl, combining a Tiger·tec Gold coating with a grade tailored to resist edge wear Tiger·tec Gold coating for high wear resistance Optimised for rostfreier Stahl (ISO group M) Stable chip control and secure edge life Reliable performance from Walter Tools Longer, more consistent tool life from advanced coating The combination of the Tiger·tec Gold coating and the WMP32G grade delivers a measurable increase in abrasion resistance and microchipping tolerance. This results in a more consistent edge life, fewer unplanned tool changes and predictable tool-change intervals. For production environments where stable performance in rostfreier Stahl is required, this specification reduces process variability and supports higher cumulative uptime. Safer chip formation and process security during turning The insert geometry identified by ER5.0ISO focuses on controlled chip formation and evacuation, which reduces the risk of built-up edge and thermal concentration under common stainless steel cutting conditions. Improved chip control translates into fewer workpiece surface defects and less machine downtime for chip-related incidents. For moderate to robust machining tasks, this leads to more reliable surface finish and repeatable cycle times. Practical integration and selection for workshop use The TS22 series format ensures compatibility with standard indexable holder systems used in turning operations, simplifying tool changeovers and inventory management. The indexable turning insert supports consistent performance across shifts and operators, while the Walter Tools specification allows straightforward replacement and traceability within tool management systems. Technical advisors can assist with the optimum cutting data for specific rostfreier Stahl grades. For technical advice on machining rostfreier Stahl with the TS22-ER5.0ISO WMP32G insert or to check current availability, contact Metav Werkzeuge via eMail info@metav-werkzeuge.com or by phone at +49 2822 7131930 — specialist consultation and order support are available Technical data Article number: TS22-ER5.0ISO-WMP32G-WALTER Label: Drehwendeschneidplatte TS22-ER5.0ISO WMP32G Walter Tools Product type: Drehwendeschneidplatte (indexable turning insert) Grade: WMP32G Series: Tiger-tec Gold Breaker/geometry: ER5.0ISO Material group code: M Facts Material designation: M (rostfreier Stahl applications) Coating technology: Tiger·tec Gold Manufacturer: Walter Tools SKU: TS22-ER5.0ISO-WMP32G-WALTER Special features Coated cemented carbide grade Optimised for rostfreier Stahl Secure chip formation and edge stability Suitable for moderate to robust cutting conditions Compatible with standard TS22 indexable holders FAQ What materials is this insert suited to? The TS22-ER5.0ISO WMP32G insert is intended primarily for rostfreier Stahl (ISO group M) and is formulated to manage the toughness and heat characteristics typical of those alloys. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WMP32G grade increases wear resistance and reduces microchipping, which helps maintain a stable cutting edge and extends the insert life in rostfreier Stahl machining. Is this insert compatible with standard turning holders? Yes, the TS22 family format is designed for compatibility with common indexable turning holders, allowing simple replacement and consistent clamping. Can this insert be used for finishing passes? The design emphasises secure edge life and chip control; with appropriate cutting data, the insert can deliver consistent surface quality in finishing and semi-finishing operations on rostfreier Stahl. Where to get cutting data for specific rostfreier Stahl grades? Cutting data and application advice for the TS22-ER5.0ISO WMP32G can be provided by technical sales or Metav Werkzeuge specialists to ensure optimal performance for particular rostfreier Stahl alloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TS22-ER5.0TR WMP32G WMP32G Wendeplatten - Walter Tools
High process reliability and Tiger·tec Gold coating ensure long tool life and stable chip formation; the ER5.0TR chipbreaker supports consistent machining of stainless steels. Benefit from the WMP32G grade for demanding turning operations and request personalised advice or order the insert via Metav Werkzeuge. TS22-ER5.0TR WMP32G turning indexable insert — Tiger·tec Gold coating for stainless steels | Walter Tools The TS22-ER5.0TR WMP32G is a turning indexable insert engineered to provide controlled chip formation and durable cutting performance in applications involving stainless steels. Tiger·tec Gold coating for enhanced tool life ER5.0TR chipbreaker for stable chip control Optimised for machining stainless steels Process stability and cutting-edge coating for longer runs The coated indexable insert from the Tiger·tec Gold series delivers a balanced combination of wear resistance and thermal stability, which materially reduces the risk of built-up edge when machining stainless steels. The WMP32G grade is a coated carbide designed to manage the high ductility and heat generation typical of these alloys, helping maintain a consistent cutting edge over longer production runs. This improves cycle reliability and reduces unscheduled tool changes, supporting continuous operation on turning centres. Precise chip control and consistent surface quality Equipped with the ER5.0TR chipbreaker, this turning insert enables reliable chip segmentation and evacuation even under variable cutting conditions. Stable chip formation lowers the chance of tangling or scratching the workpiece and contributes to an improved surface finish. In practical terms, the combination of chip geometry and the Tiger·tec Gold coating means fewer process interruptions and more predictable component quality for serial or batch production. Application scope and recommended use The insert is intended primarily for machining stainless steels (material group M) under medium to robust cutting conditions. It is suitable for conventional turning tasks where control of heat and chip behaviour is critical. For best results, pair the insert with appropriate positive or neutral tool holders designed for the TS22 geometry and select cutting parameters that account for material toughness and work-hardening tendencies. Handling, selection and economic benefits Choosing the WMP32G grade reduces the need for frequent insert changes and supports reproducible results across multiple workpieces, which can lower unit costs and increase productivity. Proper mounting in the correct toolholder geometry and adherence to recommended speeds will maximise the tool life advantage offered by the Tiger·tec Gold technology. For operators new to this grade, trial cuts with incremental parameter adjustments are a pragmatic approach to find the optimal balance of speed and tool life. Contact Metav Werkzeuge for availability and application advice on genuine Walter Tools Tiger·tec Gold inserts — info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TS22-ER5.0TR-WMP32G-WALTER Product name: TS22-ER5.0TR WMP32G Manufacturer: Walter Tools Product type: Turning indexable insert Facts Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: ER5.0TR Material group: M (stainless steels) Special features Coating technology: Tiger·tec Gold Suitable for rostfreie Stähle (stainless steels) Designed for stable chip formation and reliable cutting edges Intended for medium to robust turning conditions FAQ What materials is this insert best suited for? The TS22-ER5.0TR WMP32G insert is optimised for machining stainless steels (material group M), where heat and ductility require a grade with secure chip control. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WMP32G grade increases wear resistance and thermal stability, extending tool life and improving consistency across batches. Which chipbreaker is fitted and what is its effect? The ER5.0TR chipbreaker provides controlled chip segmentation and evacuation, reducing the risk of tangling and improving surface finish during turning operations. Is this insert suitable for fine finishing passes? Yes; while the grade is designed for medium to robust conditions, the controlled geometry enables good surface quality when parameters are adjusted for finishing cuts. How should the insert be mounted for best results? Use a compatible TS22 toolholder with secure clamping and ensure the seating is clean and free of debris to maintain repeatable cutting geometry and optimal performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking. Protected trademarks and product names belong to their respective owners and are mentioned for clarification only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com