WNMG080412-MU5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance, a MU5 chipbreaker for controlled swarf, and the robust Trigon 80° geometry to improve process security when machining rostfreier Stahl; order the insert directly via Metav Werkzeuge or contact our consultants for tailored advice. WNMG080412-MU5 WMP20G — Trigon 80° indexable turning insert, Tiger‑tec Gold, for rostfreier Stahl (Walter Tools) The WNMG080412-MU5 WMP20G is a Trigon 80° indexable turning insert designed for turning rostfreier Stahl under medium to robust cutting conditions, combining a coated carbide grade with a dedicated chipbreaker for reliable swarf control Tiger‑tec Gold grade for high wear resistance MU5 chipbreaker for stable chip formation Trigon 80° geometry for secure clamping 0° negative rake for robust cutting performance Reliable chip control for high‑temperature materials The Tiger‑tec Gold WMP20G grade is engineered to handle the typical challenges of rostfreier Stahl, including high ductility and thermal sensitivity. With a specialised MU5 chipbreaker, the insert promotes predictable chip formation and reduced risk of built‑up edge, which translates into fewer interruptions and more consistent cycle times. The combination of the coated carbide grade and the chipbreaker supports stable cutting forces, enhancing process reliability in both continuous and intermittent turning operations. Geometry that improves tool life and surface quality A Trigon 80° shape and a 1.2 mm corner radius deliver a balance between strength and surface finish. The trigon form provides three effective cutting corners per insert, while the moderate corner radius reduces local stress at the cutting edge, helping to extend service life during tougher cuts. The insert’s 0° negative rake increases edge robustness, making the geometry suited to operations where moderate to heavy engagement is required without sacrificing dimensional stability. Practical benefits for workshop productivity This insert’s geometry and grade are optimised for predictable performance and straightforward tool management. The standard WNMG form simplifies toolholder selection and indexing, enabling quick turnover on multi‑shift production lines. Thanks to the Tiger‑tec Gold technology, wear resistance is improved, which reduces frequency of tool changes and contributes to steady output quality. The product from Walter Tools supports process security and consistent surface results, making it a practical choice for shops machining rostfreier Stahl. For machining rostfreier Stahl with enhanced wear resistance and dependable chip control, contact Metav Werkzeuge to request the WNMG080412-MU5 WMP20G insert or for application support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: WNMG080412-MU5-WMP20G-WALTER Product name: Drehwendeschneidplatte WNMG080412-MU5 WMP20G Walter Tools Series: Tiger-tec Gold Grade: WMP20G Chipbreaker: MU5 Facts Insert shape: Trigon 80° Size code: 08 Thickness code: 04 Corner radius: 1.2 mm Rake angle: 0° (negative) Tolerance class: M Grade material group: M (rostfreie Stähle) Special features Coating technology: Tiger‑tec Gold Substrate: coated carbide Application: machining of rostfreier Stahl Robust edge for medium to heavy cutting conditions Brand: Walter Tools FAQ What materials is this insert suitable for? The WNMG080412-MU5 WMP20G insert is specified for rostfreier Stahl; the Tiger‑tec Gold grade supports secure chip formation and stable cutting when working these materials. How does the MU5 chipbreaker affect machining? The MU5 chipbreaker on this Walter Tools insert promotes shorter, consistent chips and reduces the likelihood of built‑up edge, improving surface consistency and process reliability. Why choose a Trigon 80° geometry for turning? Trigon 80° geometry offers three usable cutting corners per insert and a secure clamping interface; combined with a 1.2 mm corner radius, it balances edge strength and surface finish for robust operations. What does a 0° negative rake mean in practical terms? A 0° negative rake increases the edge’s mechanical strength and resistance to thermo‑mechanical loads, making the insert more tolerant of interrupted cuts and heavier engagements. Is the WMP20G grade coated and what benefit does that provide? Yes — WMP20G is a Tiger‑tec Gold coated carbide grade; the coating improves wear resistance and enhances tool life when machining rostfreier Stahl. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com Trademarks and trade names are the property of their respective owners. The mention of Walter Tools is for explanatory purposes only and indicates the original manufacturer brand. There is no affiliation between our company and the named trademark owners. The offered article is an original, factory‑new product of the manufacturer.
WNMG080412-MU5 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and a robust MU5 chipbreaker to achieve consistent chip control and long edge life when machining rostfreier Stahl; order genuine Walter Tools inserts through Metav Werkzeuge or consult our specialists for cutting‑data and process integration. WNMG080412‑MU5 WMP20S indexable turning insert — Trigon 80°, for rostfreier Stahl — Walter Tools WNMG080412‑MU5 WMP20S is an indexable turning insert engineered for medium to robust turning of rostfreier Stahl in commercial and industrial production environments, providing stable cutting edges and predictable chip formation. Tiger·tec Silver coating for stable edges Optimised for rostfreier Stahl machining Trigon 80° geometry for secure engagement MU5 chipbreaker for controlled chip formation Longer tool life and consistent edge performance The WNMG080412‑MU5 WMP20S insert combines a coated cemented carbide grade with the Tiger·tec Silver coating technology to deliver improved resistance to wear and thermal loading in rostfreier Stahl applications. The MU5 chipbreaker is designed to support stable chip segmentation, reducing the risk of built‑up edge and facilitating evacuation in interrupted or continuous cuts. This results in fewer tool changes and more reliable cycle times, which supports cost‑efficient production and predictable maintenance intervals. Confident machining of rostfreier Stahl with controlled forces Rostfreier Stahl tends to produce tough, adhesive chips and generates high temperatures at the cutting zone. The 0° negative rake and the Trigon 80° insert shape create a stiff cutting geometry that reduces deflection and keeps cutting forces stable during turning operations. The 1.2 mm corner radius provides a robust cutting edge that tolerates moderate variances in feed and depth of cut, improving repeatability on batch work and complex stainless components. For workshops seeking process stability, this combination reduces scrap rates and improves surface consistency. Practical integration into production for higher throughput The compact form and standard WNMG designation mean straightforward implementation in common toolholders and turning systems; the insert’s iso code and grade simplify tool management across machines. The hardened, coated substrate and optimised chip control permit higher metal removal rates compared with uncoated grades under comparable conditions, supporting faster cycle times where appropriate. For selection of cutting parameters or when transitioning from a different grade, Metav Werkzeuge provides technical advice and application guidance to align the WMP20S performance with specific rostfreier Stahl alloys and machining setups. For detailed cutting data, availability or to specify genuine Walter Tools Tiger·tec Silver WMP20S inserts for a production line, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, application‑oriented assistance Technical data SKU: WNMG080412-MU5-WMP20S-WALTER Designation: WNMG080412-MU5 WMP20S Product type: Indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Series: Tiger·tec Silver Core specifications Corner radius: 1.2 mm Free cutting angle: 0° (negative) Insert form: Trigon 80° Size code: 08 Thickness code: 04 Tolerance class: M Applications & features Chipbreaker: MU5 Grade: WMP20S (coated cemented carbide) Suitable for rostfreier Stahl Built for medium to robust cutting conditions Stable edge and optimised chip formation FAQ What materials is this insert intended for? The WNMG080412‑MU5 WMP20S insert is specified for machining rostfreier Stahl and is tuned for the tougher, adhesive behaviour typical of those alloys. How does the MU5 chipbreaker benefit production? The MU5 chipbreaker promotes controlled chip segmentation and evacuation, reducing built‑up edge and aiding consistent cycle times when using the WMP20S grade. What does the Trigon 80° shape mean for tool setup? The Trigon 80° geometry provides a secure insert seating with a compact cutting profile, improving rigidity and repeatable positioning in standard turning toolholders. Is the WMP20S grade suitable for finishing passes? Yes—WMP20S offers a balance of wear resistance and edge stability appropriate for finishing and medium stock removal on rostfreier Stahl, depending on selected feeds and speeds. Which features reduce downtime in series production? The combination of Tiger·tec Silver coating, a robust 1.2 mm corner radius and the MU5 chipbreaker reduces edge chipping and tool changes, supporting longer uninterrupted production runs. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
WNMG080412-MU5 WPP05G WPP05G Wendeplatten - Walter Tools
Combining Tiger·tec Gold coating with a dedicated MU5 chipbreaker, the WNMG080412-MU5 WPP05G offers extended wear resistance and consistent chip control for steel turning; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. WNMG080412-MU5 WPP05G – Trigon 80° coated carbide turning insert (Walter Tools) The WNMG080412-MU5 WPP05G is a trigon-shaped turning insert optimised for ISO P (steel) machining, featuring a 1.2 mm corner radius and a MU5 chipbreaker for reliable chip formation in medium and heavy cuts. Tiger·tec Gold coated carbide for extended tool life MU5 chipbreaker for stable chip control in steel Trigon 80° form with 1.2 mm corner radius 0° negative rake for robust roughing applications Proven wear resistance for continuous steel turning productivity The Tiger·tec Gold coating applied to this coated carbide grade provides a measurable improvement in wear resistance and cutting-edge stability, which translates into longer tool life under typical steel machining conditions. By combining a high-performance coating with a carefully balanced substrate, the insert reduces flank wear rates and maintains a predictable cutting edge over more cycles. This results in fewer tool changes and steadier process windows on production lathes, supporting higher uptime and consistent part quality. Predictable chip behaviour and process security with the MU5 chipbreaker The integrated MU5 chipbreaker is engineered to produce controllable chips when machining steel, improving machining safety and cycle reliability. Thanks to the Trigon 80° geometry, the insert provides favourable engagement angles for turning operations while the corner radius 1.2 mm absorbs cutting forces during heavier passes, reducing vibration and edge chipping. The negative rake 0° configuration further boosts robustness for interrupted cuts and roughing, enabling dependable performance in demanding production environments. Application suitability and machining advantages for ISO P materials Designed specifically for ISO P (steel) materials, this insert supports a broad range of steel grades, delivering consistent surface finish and repeatable tool life across varied operations. The tolerance class M indicates a balanced accuracy suited to general turning tasks where dependable edge quality and dimensional stability are required. Using this insert in systematic setups enhances productivity and ensures a predictable tool life, which helps to plan maintenance intervals and improve overall process economics. For demanding steel turning, select Walter Tools' Tiger·tec Gold insert and contact Metav Werkzeuge for expert application support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: WNMG080412-MU5-WPP05G-WALTER Designation: WNMG080412-MU5 Grade: WPP05G Series: Tiger·tec Gold Manufacturer: Walter Tools Data Plate form: Trigon 80° Corner radius: 1.2 mm Plate size: 08 Thickness: 04 Free rake: 0° (negative) Chipbreaker: MU5 Tolerance class: M Special features Coating technology: Tiger·tec Gold (coated carbide) Suitable material group: Steel (ISO P) Application: Medium to heavy turning, roughing and general-purpose steel machining Robust geometry for interrupted cuts and stable chip formation FAQ What materials is this insert intended for? The WNMG080412-MU5 WPP05G is formulated for ISO P applications and is intended primarily for machining steel materials. How does the MU5 chipbreaker affect machining? The MU5 chipbreaker on this Walter Tools insert promotes stable chip control, reducing chip entanglement and improving process security during turning operations in steel. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold coating enhances wear resistance and edge stability, extending the effective life of the coated carbide insert under typical steel cutting conditions. Is the trigon 80° form suitable for heavy cuts? Yes, the Trigon 80° geometry combined with a 1.2 mm corner radius and 0° negative rake delivers robustness for medium to heavy cuts and interrupted-turning applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no association between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
WNMG080412-MU5 WPP10G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold performance and the robust Trigon 80° geometry for consistent turning of steel; the MU5 chipbreaker and 1.2 mm corner radius ensure repeatable chip control and reliable edge strength for productive machining. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. WNMG080412-MU5 WPP10G – Trigon 80° indexable turning insert with Tiger·tec Gold coating by Walter Tools WNMG080412-MU5 WPP10G is an indexable turning insert designed for steel turning, combining a coated carbide grade with a specific chipbreaker for stable machining in industrial turning applications. Tiger·tec Gold coated carbide grade WPP10G Trigon 80° geometry for demanding turning 1.2 mm corner radius for robust edge strength MU5 chipbreaker for controlled chips in steel High process reliability for steel turning and predictable tool life The combination of the WPP10G coated carbide grade and Tiger·tec Gold technology delivers improved resistance to wear during continuous turning of steel. The insert’s Trigon 80° shape and 1.2 mm corner radius provide a strong cutting edge that tolerates interrupted cuts and hard contact zones; this translates into fewer tool changes and steadier cycle times. For production environments where repeatability matters, the coating and grade are designed to reduce flank wear and maintain dimensional accuracy over longer tool life. Consistent chip formation and reduced rework through MU5 chip control The MU5 chipbreaker is engineered for predictable chip formation when machining steels, producing short, controllable chips that evacuate reliably from the cutting zone. Short, consistent chips lower the risk of surface damage and reduce downtime caused by chip entanglement. The negative 0° rake (designed as a negative geometry) further enhances edge stability, making the insert suitable for heavier cuts and operations requiring robust cutting edges. This combination supports higher process security and easier handling in automated and manual turning tasks. Practical integration and application benefits for workshop use The insert’s standard WNMG geometry and ISO designation enable compatibility with common toolholders and clamping systems used in industrial turning. Because the grade is specified for machining steel, it aligns with typical production materials and avoids the need for frequent tool changes across similar jobs. The nominal plate size and thickness are matched to standard seatings, supporting rapid replacement and minimal setup time. For projects where machine utilisation and predictable output are priorities, this insert provides a balance of durability and chip control that supports efficient workshop workflows. Contact Metav Werkzeuge for tailored advice on integrating the Walter Tools WNMG080412-MU5 WPP10G insert into production and to arrange procurement: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: WNMG080412-MU5-WPP10G-WALTER Label: Drehwendeschneidplatte WNMG080412-MU5 WPP10G Walter Tools Manufacturer: Walter Tools Facts Corner radius: 1.2 mm Free rake angle: 0° (negative) Insert form: Trigon 80° Insert size: 08 Thickness designation: 04 Tolerance class: M Special features Grade: WPP10G Coating technology: Tiger·tec Gold Chipbreaker: MU5 Material application: Steel (P) Geometry: Negative rake configuration FAQ What materials is this insert suitable for? The WNMG080412-MU5 WPP10G insert is specified for machining steel (material group P) and is optimised for the typical heat and chip formation encountered in steel turning. How does the MU5 chipbreaker affect machining performance? The MU5 chipbreaker provides controlled chip formation and reliable evacuation when cutting steel, reducing the risk of surface damage and improving process security with the WNMG080412-MU5 WPP10G. What is the significance of the 0° negative rake? A 0° negative rake increases edge robustness and resistance to mechanical shock, making the insert suitable for heavier cuts and applications with variable cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanation only and do not imply any affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer Walter Tools.
WNMG080412-MU5 WPP20G Wendeplatten - Walter Tools
Combine the wear resistance of the Tiger·tec Gold coating with the universal WPP20G grade and the stable Trigon 80° geometry to achieve predictable tool life and consistent chip control in steel turning; order directly via Metav Werkzeuge or request tailored advice from our consultants. WNMG080412-MU5 WPP20G Turning Insert for Steel, Tiger·tec Gold — Walter Tools The WNMG080412-MU5 WPP20G is a trigonal 80° turning insert engineered for steel machining, combining a robust MU5 chipbreaker with a 1.2 mm corner radius for reliable chip control and repeatable surface quality. Tiger·tec Gold coating for consistent edge life WPP20G grade for universal steel machining Trigon 80° shape for stable cutting geometry MU5 chipbreaker for controlled chip formation Predictable performance from advanced coating and grade The combination of the Tiger·tec Gold coating with the WPP20G carbide grade delivers a balance between wear resistance and toughness that is especially beneficial in P‑group applications (steel). The advanced coating reduces abrasive wear and thermal impact during continuous cutting, which translates into longer intervals between index changes and more consistent component quality. For production environments where repeatability matters, this grade reduces variability in flank wear and helps maintain dimensional control over longer tool life. Stable geometry and effective chip management for better surface finish The Trigon 80° plate form paired with the MU5 chipbreaker and a 1.2 mm corner radius provides a stable cutting edge and defined chip formation. The trigonal geometry increases insert support in the toolholder, improving vibration resistance during longitudinal and light profiling operations. The MU5 chipbreaker directs and breaks chips predictably in steel turning, reducing the risk of entanglement and improving evacuation. As a result, machining becomes more efficient and surface integrity is preserved with fewer secondary operations. Seamless integration into machining processes and tool programmes Designed for universal use in steel, this insert supports process security and efficient tool management in clustered toolrooms and serial production alike. The negative 0° clearance angle helps when a robust cutting edge and higher cutting forces are required, while the standardised WNMG form simplifies inventory and toolholder compatibility. When longer runtimes and consistent results are priorities, the combination of geometry, chip control and coating supports higher uptime and lower overall tooling consumption. For specific application advice or recommendations on cutting data, Metav Werkzeuge can provide targeted support based on the machining task. For tailored tool recommendations based on Walter Tools' Tiger·tec Gold technology and the WNMG080412-MU5 WPP20G insert, contact Metav Werkzeuge for personalised advice and rapid supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: WNMG080412-MU5-WPP20G-WALTER Designation: WNMG080412-MU5 ISO designation: WNMG080412-MU5 WPP20G Series: Tiger·tec Gold Grade: WPP20G Manufacturer: Walter Tools Facts Size: 08 Thickness: 04 Corner radius: 1.2 mm Clearance angle: 0° (negative) Shape: Trigon 80° Tolerance class: M Features & applications Chipbreaker: MU5 Coating: Tiger·tec Gold Substrate: coated carbide Material application: Steel (ISO group P) Series description: WPP20G is a Walter carbide grade optimised for steel machining FAQ What materials is this insert intended for? The WNMG080412-MU5 WPP20G insert is specified for steel (ISO group P) applications and is designed to handle the typical heat and chip formation encountered when machining unalloyed and alloyed steels. What is the benefit of the Tiger·tec Gold coating on this grade? The Tiger·tec Gold coating on the WPP20G grade improves wear resistance and thermal stability, which helps the insert maintain edge integrity and deliver consistent performance in steel turning with Walter Tools' manufacturing standards. How does the MU5 chipbreaker influence machining? The MU5 chipbreaker on this insert promotes controlled chip formation and reliable evacuation during turning, reducing the likelihood of chip-related interruptions and supporting improved surface finish on turned steel components. What does the Trigon 80° geometry mean for toolholders and stability? The Trigon 80° form gives three cutting edges per insert and a robust seat in standard toolholders; this geometry enhances stability under cutting loads and supports repeatable cutting performance in production settings. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for descriptive purposes only and do not imply any affiliation or endorsement. The offered item is an original, brand‑new product from the manufacturer.
WNMG080412-MU5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of a wear‑resistant coated grade, robust MU5 chip control and a Trigon 80° geometry to maintain stable cutting edges and reliable productivity in demanding turning operations; order the inserts directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. WNMG080412-MU5 WSM20S turning insert — Tiger‑tec Silver, for rostfreier Stahl and superalloys | Walter Tools The WNMG080412-MU5 WSM20S is a Trigon 80° turning insert engineered for heavy‑duty and difficult‑to‑machine applications, offering a balance of edge stability and controlled chip formation for rostfreier Stahl and heat‑resistant superalloys. Tiger‑tec Silver coated carbide grade Designed for rostfreier Stahl and superalloys Trigon 80° profile for robust cutting MU5 chipbreaker for controlled chip formation Higher process reliability in heavy turning operations The coated carbide WSM20S grade from the Tiger‑tec Silver family delivers a wear‑resistant cutting zone that is specifically optimised for ductile, strain‑hardening materials. Its design reduces edge build‑up and thermal degradation under high machining temperatures, which translates into longer tool life and fewer unscheduled insert changes. The combination of a robust coating and a grade tuned for stability ensures consistent component quality in serial production, supporting predictable cycle times and less rework. Improved surface finish through controlled chip formation A dedicated MU5 chipbreaker offers reliable chip control even when machining sticky or work‑hardening alloys. Controlled chip formation minimises interruptions and reduces the risk of surface damage, resulting in an improved finish and less manual cleaning. Because the chipbreaker geometry is matched to the insert form, the insert supports steady material evacuation and stable cutting conditions, which is crucial when processing rostfreier Stahl where heat and adhesion commonly affect surface integrity. Robust geometry that withstands demanding cuts The Trigon 80° form and a 1.2 mm corner radius provide mechanical strength at the cutting edge, making the insert suitable for interrupted cuts or heavy cross‑section removal. The 0° (negativ) relief angle increases edge support and resists chipping under heavy engagement, enabling more aggressive feeds and depths of cut without sacrificing edge security. These geometric choices favour production environments where durability and repeatability are required over extended tool campaigns. Compatibility, handling and production benefits Tolerance class M and the standardised insert dimensions ensure straightforward mounting and interchangeability in common toolholders. The grade is specified for material groups S and M, meaning it is applicable to heat‑resistant superalloys and rostfreier Stahl; this reduces the need for multiple tool families and simplifies inventory. Clear grade identification and a consistent coating behaviour support predictable process set‑up and make this insert a practical option for job shops and production lines aiming to streamline turning operations. Contact Metav Werkzeuge for tailored machining advice or to request Walter Tools WNMG080412-MU5 WSM20S inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: WNMG080412-MU5-WSM20S-WALTER Designation: WNMG080412-MU5 WSM20S Product type: turning insert Series: Tiger‑tec Silver Grade: WSM20S Manufacturer: Walter Tools Dimensions & Key Data Insert size: 08 Thickness: 04 Corner radius: 1.2 mm Relief angle: 0° (negative) Tolerance class: M Special features Coating: Tiger‑tec Silver Chipbreaker: MU5 Form: Trigon 80° Material suitability: S / M Application focus: rostfreier Stahl and heat‑resistant superalloys FAQ What materials is this insert best suited for? The WNMG080412-MU5 WSM20S turning insert is designed primarily for rostfreier Stahl and heat‑resistant superalloys (material groups M and S), where edge stability and thermal resistance are required. How does the MU5 chipbreaker improve machining? The MU5 chipbreaker on this Walter Tools insert promotes controlled chip formation and evacuation, reducing the risk of surface damage and facilitating continuous machining cycles. Can this insert handle interrupted cuts and heavy engagement? Yes, the Trigon 80° geometry combined with a 1.2 mm corner radius and a 0° (negative) relief angle offers enhanced edge support for interrupted cuts and higher material removal rates. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080412-MW5 WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKK10S grade for reliable wear resistance in cast‑iron turning, plus the Trigon 80° geometry for secure edge strength; order directly via Metav Werkzeuge or contact our consultants for machining recommendations. WNMG080412-MW5 WKK10S indexable turning insert by Walter Tools — Tiger‑tec Silver, for cast iron The WNMG080412-MW5 WKK10S is an indexable turning insert designed for productive machining of cast iron, combining a wear‑resistant Tiger‑tec Silver grade with an MW5 chipbreaker and Trigon 80° form for robust, repeatable performance Tiger‑tec Silver coating for high wear resistance Optimised for cast iron (ISO K) machining Trigon 80° form with 1.2 mm corner radius MW5 chipbreaker for stable chip control Extended tool life through advanced coating and grade selection The Tiger‑tec Silver technology, paired with the WKK10S coated carbide grade, delivers pronounced wear resistance when machining abrasive cast materials. This combination reduces flank and crater wear under cyclic loads typical of grey and nodular cast irons, which in turn prolongs tool life and reduces frequency of indexing. For production environments this means fewer tool changes, more consistent batch output and lower per‑part tooling costs. The coating also supports stable edge geometry during interrupted cuts, improving overall cycle reliability. Stable cutting geometry for consistent surface quality and uptime The Trigon 80° insert geometry with a 1.2 mm corner radius and a 0° negative rake provides a mechanically strong cutting edge that resists chipping in interrupted or heavy‑cut conditions. The MW5 chipbreaker is designed to produce short, controllable chips when turning cast iron, preventing entanglement and easing chip evacuation from the cutting zone. Together these features support repeatable surface finish and dimensional stability, helping to reduce rework and machine downtime in medium‑ to high‑volume turning operations. Seamless integration for productive machining workflows As a standard WNMG form, this indexable insert fits common clamping systems and can be indexed quickly to restore a fresh cutting edge, keeping set‑up times low. The grade balances wear resistance and toughness for cast‑iron applications, so it is suitable for a range of operations from roughing to semi‑finishing where chip control and edge life are priorities. The result is improved process security and predictable tool performance, which supports lean machining strategies and higher overall throughput. Contact Metav Werkzeuge for tailored machining data and ordering of Walter Tools WNMG080412-MW5 WKK10S to increase cast‑iron productivity — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: WNMG080412-MW5-WKK10S-WALTER Designation: Drehwendeschneidplatte WNMG080412-MW5 WKK10S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKK10S Chipbreaker: MW5 Facts Corner radius: 1.2 mm Insert form angle: 80° Plate size: 08 Plate thickness: 4 mm Rake: 0° (negative) Tolerance class: M Special features Coating: Tiger‑tec Silver Application: cast iron (ISO K) Insert form: Trigon 80° Balance of wear resistance and toughness for interrupted cuts Stable chip control with MW5 design FAQ What materials is this insert intended for? The Walter Tools WNMG080412-MW5 WKK10S is specified for machining cast iron (ISO K) and is optimised for the abrasive and often brittle chip formations typical of these materials. How does the Tiger‑tec Silver coating benefit production? The Tiger‑tec Silver coating on the WKK10S grade improves wear resistance and edge stability, which translates to longer tool life and fewer indexings in continuous turning operations. Which machining tasks suit this insert best? The Trigon 80° form with a 1.2 mm corner radius and MW5 chipbreaker is suited to stable roughing and semi‑finishing in cast‑iron components where chip control and edge robustness are required. Is the insert compatible with standard WNMG toolholders? Yes, the WNMG080412 form is a standard indexable geometry and fits conventional toolholders designed for WNMG inserts, enabling straightforward replacement and indexing. Can this insert handle interrupted cuts? The 0° negative rake and robust Trigon geometry provide a strong cutting edge designed to withstand intermittent engagement and reduce chipping during interrupted cuts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. The mentioned brands and registered marks are cited for explanation only. No affiliation with the manufacturers is implied. The offered item is original, brand‑new merchandise from the listed manufacturer.
WNMG080412-MW5 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a WKK20S wear grade tuned for cast iron and a robust Trigon 80° geometry to achieve productive, repeatable turning results; order directly via Metav Werkzeuge or contact the team for application advice. WNMG080412-MW5 WKK20S — Turning insert, Tiger·tec Silver, for cast iron — Walter Tools WNMG080412-MW5 WKK20S is a negative‑rake, trigon‑shaped turning insert designed for reliable machining of cast iron components Tiger·tec Silver coating for high wear resistance Optimised for cast iron machining Trigon 80° geometry for stable cuts 1.2 mm corner radius for robust cutting edge Consistent chip control and longer tool life for cast iron production The combination of the WKK20S grade and the Tiger·tec Silver coating targets the abrasive wear characteristics and short, brittle chips typical of cast iron. The insert’s micro‑structured coating reduces flank and crater wear, which translates into longer tool life and fewer interruptions on the shop floor. For production environments where cycle time and component quality are critical, this wear‑resistant formulation enables stable cutting parameters and predictable change intervals without compromising surface finish. Geometry that stabilises cutting and reduces vibration With its Trigon 80° form and a 1.2 mm corner radius, the insert offers a robust edge that tolerates interrupted cuts and tool deflection better than finer radii. The 0° negative rake provides a stronger cutting edge for heavy cuts and interrupted feed conditions, while the MW5 chipbreaker is configured to promote controlled chip fragmentation when machining grey and nodular cast irons. These design choices reduce chatter and enhance dimensional stability, supporting repeatable tolerances and fewer rework cycles. Practical advantages in production and process reliability The insert’s tolerance class M and execution G indicate consistent manufacturing quality and interchangeability in standard toolholders. The product is specifically matched to the K (cast iron) workpiece group, which simplifies grade selection for mixed‑material shops. Fewer tool changes and steadier productivity contribute to lower overall machining costs and better machine availability. For customers seeking process security, the insert’s predictable wear patterns and established grade technology minimise variation between batches. For tailored advice on integrating this Walter Tools insert into existing toolpaths, or to request application data sheets and cutting parameter recommendations, contact Metav Werkzeuge — the team is ready to support selection and supply. Technical Data Article number: WNMG080412-MW5-WKK20S-WALTER SKU: WNMG080412-MW5-WKK20S-WALTER Product type: Turning insert Series: Tiger·tec Silver Grade: WKK20S Facts Size code: 08 Thickness code: 04 Corner radius: 1.2 mm Rake angle: 0° (negative) Geometry: Trigon 80° Chipbreaker: MW5 Special features Coating: Tiger·tec Silver Wear grade: WKK20S (coated carbide) Suitable workpiece group: cast iron (K) Tolerance class: M Execution: G Designed for abrasive wear resistance and short, breaking chips FAQ What materials is this insert intended for? The WNMG080412-MW5 WKK20S insert is designed primarily for machining cast iron; the WKK20S grade is optimised for the abrasive wear and chip forms typical of cast materials. What are the key geometry advantages of this insert? The Trigon 80° shape and 1.2 mm corner radius provide a robust cutting edge and improved stability in interrupted cuts, while the 0° negative rake enhances edge strength for heavier machining. Which chipbreaker does the insert use and why is it relevant? This insert uses the MW5 chipbreaker, which promotes controlled chip fragmentation when turning cast iron, improving evacuation and reducing the risk of entanglement. How does the Tiger·tec Silver coating affect performance? The Tiger·tec Silver coating enhances wear resistance and heat tolerance, resulting in longer tool life and more consistent surface finish in abrasive turning operations. What is the full product identifier for ordering or referencing? Reference the article number WNMG080412-MW5-WKK20S-WALTER when ordering to ensure the correct Tiger·tec Silver WKK20S turning insert is supplied. Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, factory‑new goods of the manufacturer (Walter Tools). Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
WNMG080412-MW5 WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the MW5 chipbreaker for secure, productive machining of stainless steel. Order the WNMG080412‑MW5 WMP20G directly via Metav Werkzeuge or consult our specialists for process-tailored recommendations. WNMG080412‑MW5 WMP20G — Trigon 80° turning insert, Tiger‑tec Gold (Walter Tools) The WNMG080412‑MW5 WMP20G is a trigon 80° turning insert engineered for reliable machining of stainless steel under medium to robust cutting conditions Tiger‑tec Gold coating for enhanced wear resistance MW5 chipbreaker for stable chip control Trigon 80° geometry for secure clamping Consistent results through optimised chip control and geometry The combination of the MW5 chipbreaker and trigon form delivers stable chip control, reducing the risk of built-up edge and machine downtime when machining stainless steel. The insert’s design supports predictable chip forms even under interrupted cuts, which translates into fewer tool changes and more consistent parts per shift. This focus on process stability increases throughput without sacrificing component quality. Extended tool life and surface quality from Tiger‑tec Gold The Tiger‑tec Gold technology and coated‑carbide grade WMP20G provide improved wear resistance and thermal stability. Those properties help to maintain a sharper cutting edge for longer, which supports a steadier surface finish in serial production. In practice, the coating reduces flank wear and extends the interval between indexings, offering a measurable contribution to machining economy and reduced process variation. Secure edge strength and clamping for heavy cuts Trigon 80° geometry combined with a 1.2 mm corner radius and a 0° negative clearance ensures strong cutting edges and reliable clamping in robust operations. The insert’s shape improves cutting‑edge engagement and distributes cutting forces across a broader area, which is particularly beneficial when higher feed rates are required. The result is reduced vibration, fewer edge failures and a dependable platform for demanding turning tasks. Application focus and process guidance Designed primarily for stainless steel (material group M), this insert is intended for medium to robust conditions where secure chip evacuation and edge life are priorities. The coated carbide grade WMP20G is selected to counter the typical challenges of stainless steel machining — toughness, adhesion and heat generation — and to support predictable machining cycles. For process optimisation or insert selection across different stainless grades, technical consultation can help determine cutting data and toolholder combinations that maximise productivity. For reliable stainless‑steel turning with Tiger‑tec Gold, contact Metav Werkzeuge for tailored recommendations by e‑mail at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: WNMG080412-MW5-WMP20G-WALTER Label: Drehwendeschneidplatte WNMG080412-MW5 WMP20G Walter Tools Manufacturer: Walter Tools Type: turning insert Facts Insert size: 08 Insert thickness: 04 Corner radius: 1.2 mm Clearance angle: 0° (negative) Geometry: Trigon 80° Special features Series: Tiger‑tec Gold Grade: WMP20G (coated carbide) Chipbreaker: MW5 Material group: M (stainless steels) Application: medium to robust cutting conditions FAQ Which materials is this insert intended for? The WNMG080412‑MW5 WMP20G is specified for stainless steels (material group M), with the grade and coating tuned to cope with the toughness and adhesion tendencies of stainless steels. What chip control can be expected with the MW5 chipbreaker? The MW5 chipbreaker on this insert promotes compact, controlled chips and reduces the likelihood of built‑up edge during turning with the WMP20G grade. How does the trigon 80° geometry affect clamping and stability? Trigon 80° geometry provides a wide contact area for secure clamping; combined with a 1.2 mm corner radius and 0° negative clearance, it enhances edge strength and vibration resistance. Is this insert suitable for finishing operations? The WMP20G grade and Tiger‑tec Gold coating favour robust and medium cutting conditions; while it supports good surface quality, process parameters should be adapted for fine finishing tasks. Manufacturer: Walter Tools; The Walter AG, Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for identification and explanatory purposes. There is no affiliation or connection between Metav Werkzeuge and the referenced manufacturers. The offered item is an original, factory‑new product of the stated manufacturer.
WNMG080412-MW5 WMP20S Wendeplatten - Walter Tools
Benefit from Tiger‑tec Silver performance combined with the robust WMP20S grade and trigon 80° geometry to achieve secure chip control and consistent tool life in stainless steel turning. Order the WNMG080412-MW5 WMP20S insert directly via Metav Werkzeuge or ask our consultants if needed. WNMG080412-MW5 WMP20S — Trigon 80° turning insert for stainless steel by Walter Tools The WNMG080412-MW5 WMP20S is a trigon 80° indexable turning insert engineered for reliable machining of stainless steel under moderate to robust cutting conditions. Tiger‑tec Silver coated carbide grade WMP20S Trigon 80° insert with 1.2 mm corner radius Negative 0° rake for robust cutting stability Optimised MW5 chipbreaker for stainless steel Consistent machining performance for stainless steel The combination of Tiger‑tec Silver coating and the WMP20S grade delivers a balance between wear resistance and toughness that is particularly beneficial when machining stainless steel. The coating reduces built‑up edge and helps disperse heat, while the substrate composition supports a stable cutting edge under intermittent or elevated temperatures. This results in improved process security and reduced unscheduled downtime. For production environments where reproducible surface finish and repeatable tool life matter, the material and coating pairing supports a predictable and cost‑efficient turning process. Geometry that stabilises cutting and improves surface quality The trigon 80° format together with a 1.2 mm corner radius provides a versatile cutting geometry suitable for both roughing and finishing passes, offering a compromise between edge strength and surface finish. The negative 0° rake increases cutting stability and reduces the tendency for flexing under higher radial loads, which is advantageous when facing variable stainless steel batches. The MW5 chipbreaker is optimised for the material group M, promoting reliable chip formation and evacuation; this reduces the risk of entanglement and supports consistent part quality across shifts. Practical integration and advantages for production use Adopting this insert in a production toolholder yields straightforward benefits: stable chip control lowers rework rates and the robust grade extends in‑service intervals. The insert’s nominal geometry and standardised designation simplify tool management, replacement and inventory logistics. The specification supports operators and process engineers in selecting cutting parameters with an emphasis on process stability rather than aggressive cutting limits. For users with limited metallurgical expertise, the grade and chipbreaker combination means fewer trial adjustments while maintaining good surface integrity and predictable tool life. For secure stainless steel turning using Walter Tools’ Tiger‑tec Silver grade, contact Metav Werkzeuge for availability and tailored cutting data at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the WNMG080412-MW5 WMP20S insert and compatible toolholders Technical data SKU: WNMG080412-MW5-WMP20S-WALTER Designation: WNMG080412-MW5 WMP20S Product type: turning insert Facts Corner radius: 1.2 mm Insert size: 08 Thickness: 04 Relief angle: 0° (negative) Special features Series: Tiger‑tec Silver Grade: WMP20S (coated carbide) Chipbreaker: MW5 Geometry: Trigon 80° Material application: stainless steel FAQ What materials is this insert designed for? The WNMG080412-MW5 WMP20S insert is designed for machining stainless steel, with the WMP20S grade and MW5 chipbreaker tuned for secure chip control and thermal stability. How does the Tiger‑tec Silver coating affect tool life? The Tiger‑tec Silver coating on the WMP20S grade reduces adhesion and helps manage cutting heat; this typically extends effective tool life during continuous stainless steel turning. Is the negative 0° rake suitable for finishing passes? Yes, the negative 0° rake increases cutting edge strength and, when combined with the 1.2 mm corner radius, provides a good compromise for light finishing and tougher semi‑finishing operations. Can this insert be used in standard toolholders? The WNMG designation follows common indexable insert standards, so the WNMG080412-MW5 WMP20S will fit compatible holders designed for trigon 80° WNMG inserts. What is the benefit of the MW5 chipbreaker? The MW5 chipbreaker promotes consistent chip formation when machining stainless steel, reducing the risk of problematic long chips and aiding reliable evacuation in production conditions. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) is part of the Sandvik Group and ranks among the world’s leading manufacturers of precision metal‑working tools. Walter Tools products are designed for high process reliability, precise machining and constant tool life performance. Trademarks and trade names are the property of their respective owners. The mentioned brand is referenced for explanation only; there is no affiliation implied. The offered item is original, brand‑new factory goods of the manufacturer.
WNMG080412-MW5 WPP05G Wendeplatten - Walter Tools
Take advantage of the combination of consistent chip control, longer edge life and versatile steel machining for dependable turning performance. Order the WNMG080412-MW5 WPP05G insert directly via Metav Werkzeuge or consult the technical team for application advice. WNMG080412-MW5 WPP05G turning insert — Trigon 80° for steel machining by Walter Tools WNMG080412-MW5 WPP05G is a trigon 80° turning indexable insert designed for productive steel turning applications, offering a Tiger‑tec Gold coated carbide grade and a precise MW5 chipbreaker. Tiger‑tec Gold coated carbide Trigon 80° geometry for interrupted cuts 0° negative rake for robust machining 1.2 mm corner radius for stable edge life Higher productivity through optimised chip control The Tiger‑tec Gold coating and the MW5 chipbreaker work together to provide reliable chip formation and evacuation when machining steels. This combination reduces the risk of built-up edge and supports stable cutting conditions, which translates into fewer unplanned stoppages and improved cycle times. The insert geometry — a Trigon 80° shape with 0° negative rake — increases robustness in heavy cuts, while the coated carbide substrate maintains strength at elevated cutting temperatures, so productivity gains are tangible on both finish and semi-finish operations. Longer tool life and predictable performance The WPP05G grade is engineered for general-purpose steel applications and balances wear resistance with toughness. The 1.2 mm corner radius provides a compromise between edge strength and surface finish, extending the service intervals of the toolholder setup. As a result, the insert offers consistent dimensional accuracy across components and predictable tool-change intervals. Clear specification of tolerance class M supports reproducible machining results in serial production and simplifies process planning for production engineers. Ease of integration and handling benefits The trigon insert form and standard ISO designation enable straightforward integration into existing toolholders and tool management systems. The compact plate thickness and the WNMG080412-MW5 geometry allow easy indexing and quick regrinding schedules where applicable. Documentation-friendly marking and familiar chipbreaker nomenclature mean set-up times are reduced and operator training is simplified, helping shops focus on throughput and quality rather than routine adjustments. For ordering, cutting data recommendations or application-specific advice on Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge for direct procurement and technical consultation at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: WNMG080412-MW5-WPP05G-WALTER Designation: WNMG080412-MW5 WPP05G Product type: Turning indexable insert Facts Corner radius: 1.2 mm Insert size: 08 Plate thickness: 04 Free rake angle: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP05G (coated carbide) Shape: Trigon 80° Chipbreaker: MW5 Application: Steel machining Suitable for standard turning operations FAQ What materials is this insert intended for? The WNMG080412-MW5 WPP05G insert is specified for machining steel classes according to its WPP05G grade and Tiger‑tec Gold coating, offering a balance of wear resistance and toughness. How does the MW5 chipbreaker influence performance? The MW5 chipbreaker on this Trigon insert controls chip form for safer evacuation and reduced built-up edge, improving surface finish and consistent cycle times during steel turning. Is the geometry suitable for interrupted cuts? Yes, the Trigon 80° form and the 0° negative rake provide added robustness, making the insert suitable for interrupted or unstable cutting conditions. How does the WPP05G grade compare to other grades for steel? WPP05G, as part of the Tiger‑tec Gold family, targets universal steel applications with an emphasis on economic wear behaviour and reliable edge life under typical steel cutting temperatures. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080412-MW5 WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold combination and the robust WPP10G grade for reliable steel machining; the Trigon 80° geometry with a 1.2 mm corner radius delivers a secure cutting edge and consistent tool life. Order directly via Metav Werkzeuge or consult our specialists for application advice. WNMG080412-MW5 WPP10G Trigon 80° turning insert – Tiger·tec Gold, for steel, Walter Tools The WNMG080412-MW5 WPP10G is a Trigon 80° turning insert with Tiger·tec Gold coating, engineered for productive machining of steel components in industrial turning applications Tiger·tec Gold for extended wear resistance Trigon 80° geometry for strong cutting edge 1.2 mm corner radius for stable cutting MW5 chipbreaker for controlled chip formation Increase productivity on steel components The combination of the Tiger·tec Gold coating and the WPP10G grade provides a balance of wear resistance and toughness that is specifically tuned for machining steel. The insert’s coated carbide substrate tolerates the thermal and mechanical loads typical in turning operations and helps to extend tool life, reducing interruptive tool changes. The 0° (negative) relief improves edge strength under heavy loads, while the 1.2 mm corner radius supports stable cutting forces and improves process security. These characteristics translate into fewer interruptions, more consistent cycle times and better utilisation of machining capacity. Reliable chip control and surface consistency The MW5 chipbreaker is designed to shape chips effectively during the cutting of unalloyed and alloyed steels, promoting predictable evacuation and reducing the risk of re-cutting. The Trigon 80° form gives a mechanically robust cutting edge that withstands intermittent cuts and interrupted machining. With a nominal thickness and proven geometry, the insert supports both medium and heavy cuts with improved surface repeatability. Clear chip formation and secure edge behaviour contribute to lower scrap rates and a more efficient post-process workflow. Simple selection and robust industrial integration Marked with the ISO-style designation and tolerance class M, the insert is easy to specify when matching tooling systems across workshops and production lines. The standard WNMG form and size enable straightforward replacement in compatible tool holders, shortening set-up times and simplifying inventory management. The grade’s focus on steel (P) applications and the coated carbide construction make it suitable for a wide range of turning tasks, from semi-finish to roughing, delivering consistent results across batch and single-piece production environments. The product supports predictable machining and helps to maintain throughput in demanding schedules. For tailored machining recommendations or to request application data for Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 — our consultants will advise on the best insert variant for the intended steel grades Technical data SKU: WNMG080412-MW5-WPP10G-WALTER Designation: WNMG080412-MW5 ISO designation: WNMG080412-MW5 WPP10G Manufacturer: Walter Tools Facts Insert shape: Trigon 80° Insert size: 08 Thickness: 04 Corner radius: 1.2 mm Relief angle: 0° (negative) Tolerance class: M Materials and features Series: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: MW5 Primary application group: Steel (P) Insert type: Drehwendeschneidplatte / turning insert FAQ Which materials is this insert suitable for? The insert is designed for machining steel; the WPP10G grade and Tiger·tec Gold technology are optimised for the thermal and chip-formation behaviour of steels. What is the ISO designation and how does it help? The ISO-style designation WNMG080412-MW5 WPP10G identifies geometry, size and grade, simplifying selection and ensuring compatibility with standard WNMG tool holders. What chip control performance can be expected? The MW5 chipbreaker delivers controlled chip formation when cutting steel, supporting efficient evacuation and reduced rework. How does the Trigon 80° geometry affect cutting? The Trigon 80° form provides a mechanically strong cutting edge, improving resistance to edge chipping and supporting interrupted cuts and roughing operations. Is the insert suitable for heavy-duty turning? With a negative relief and a 1.2 mm corner radius, the insert is well suited to robust cutting conditions commonly encountered in industrial turning of steel. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered item is an original, brand-new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
WNMG080412-MW5 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coated carbide and the MW5 chipbreaker for stable chip formation and reliable performance in steel machining; the trigon geometry and 1.2 mm corner radius add robustness for demanding turning operations. Order the insert directly via Metav Werkzeuge or consult the Metav team for application-specific advice. WNMG080412-MW5 WPP20G – Indexable turning insert, Trigon 80°, Tiger·tec Gold (Walter Tools) The WNMG080412-MW5 WPP20G is an indexable turning insert designed for steel machining; it pairs a Tiger·tec Gold coated carbide grade with a robust MW5 chipbreaker and trigon 80° geometry to deliver productive, repeatable results in industrial turning applications. Tiger·tec Gold coated carbide grade WPP20G Optimised MW5 chipbreaker for steel Trigon 80° insert with 1.2 mm corner radius 0° negative rake for robust cutting Productive steel machining with a coated carbide grade The combination of the WPP20G coating technology and a wear-resistant carbide substrate provides a balance of toughness and wear resistance tailored for machining steel (ISO group P). The coated structure reduces flank wear and improves tool life under the heat and chip loads typical of steel turning. As a consequence, cycle times are more consistent and component tolerances remain stable — an important factor when process reliability and throughput matter in production environments. The Tiger·tec Gold designation signifies proven coating performance for universal steel applications. Geometry engineered for stability and chip control A Trigon 80° form with a 1.2 mm corner radius offers increased edge strength for interrupted cuts and heavier engagements. The MW5 chipbreaker is optimised for typical steel chip formation, promoting short, controllable chips that evacuate reliably and reduce the risk of workpiece damage or tool interference. The 0° negative rake contributes to a robust cutting edge, making the insert suitable for operations where rigidity and resistance to edge chipping are priorities. Specification clarity for process planning Key designations such as the WNMG shape code and the WPP20G grade provide clear guidance for tool selection and replacement. The insert’s size and thickness codes allow simple matching with toolholders and adapters according to established ISO conventions. Using this standardised nomenclature streamlines inventory management in the tool crib and ensures compatibility across toolholder families. The tolerance class M indicates manufacturing precision appropriate for industrial turning tasks. Application benefits and workshop integration Integrating this indexable insert into production processes typically results in lower per-part tool costs thanks to the coated carbide’s extended life and the multi-edge usability of the insert form. The MW5 chip control reduces secondary operations and cleanup, improving overall process efficiency. For shops seeking a balance between productivity and reliability, this insert supports consistent finishes and repeatability across batch runs while remaining easy to replace and index when required. Contact Metav Werkzeuge for tailored application advice and availability—info@metav-werkzeuge.com or call +49 2822 7131930; Metav can advise on the best toolholder pairing and delivery options for Walter Tools inserts. Technical data SKU: WNMG080412-MW5-WPP20G-WALTER Product type: Turning insert (indexable) Brand: Walter Tools Grade: WPP20G Series: Tiger·tec Gold Shape designation: Trigon 80° (WNMG) Basic designation: WNMG080412-MW5 Facts Corner radius: 1.2 mm Free rake: 0° (negative) Size designation: 08 Thickness designation: 04 Tolerance class: M Special features Coating technology: Tiger·tec Gold Chipbreaker: MW5 Suitable for: Steel (ISO group P) Execution: G Indexable insert, trigon geometry, robust edge FAQ What materials is this insert suitable for? The WNMG080412-MW5 WPP20G insert from Walter Tools is designed primarily for steel (ISO group P) machining and is optimised for typical steel chip and heat conditions. How does the MW5 chipbreaker affect machining? The MW5 chipbreaker on this insert promotes short, controlled chips during steel turning, improving evacuation and reducing the chance of chip entanglement or surface damage. Is the geometry suitable for interrupted cuts? Yes — the Trigon 80° form combined with a 1.2 mm corner radius and 0° negative rake offers enhanced edge strength for interrupted and heavy-turning applications. Can this insert be used in general-purpose turning operations? The Walter Tools WNMG080412-MW5 WPP20G is intended as a universal solution for many steel turning tasks, offering a balance between wear resistance and toughness for varied production needs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, factory-new product of the manufacturer, Walter Tools.
WNMG080412-NRS WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance from the Tiger‑tec Silver series, a WSM01 grade optimised for heat-resistant alloys and stainless steel, and a robust Trigon 80° form for stable performance in interrupted and continuous turning; order directly via Metav Werkzeuge or contact the consultants for application advice. WNMG080412-NRS WSM01 Trigon 80° turning insert — Walter Tools, Tiger‑tec Silver, 1.2 mm radius The WNMG080412-NRS WSM01 is a coated cemented-carbide turning insert designed for face and profile turning of stainless steel and heat-resistant superalloys, offering a secure chip formation and durable cutting edge in demanding applications. Tiger‑tec Silver coating for wear resistance Trigon 80° geometry for high stability 0° negative rake for interrupted cuts Optimised for stainless steel and superalloys Reliable material performance that reduces downtime The combination of the Tiger‑tec Silver series and the WSM01 grade delivers a coated carbide solution that targets the typical problems encountered with stainless steel and high-temperature alloys: edge adhesion, poor heat dissipation and tool wear. The coating improves surface hardness and reduces chemical affinity between workpiece and insert, which in turn supports a stable chip formation and extends edge life. For operations where tool changes interrupt productive cycles, the result is fewer interventions and more consistent throughput — a direct contribution to process efficiency and predictable cycle times. Geometry engineered for secure cutting and reproducible results The Trigon 80° plate form with a 1.2 mm corner radius offers a robust edge for moderate to heavy cuts while maintaining dimensional control. The 0° negative rake angle increases edge strength and resists chipping during interrupted cuts or roughing passes, and the NRS chipbreaker geometry supports segmented chips suitable for tough-to-machine materials. These design choices translate into tangible process benefits: enhanced cutting stability, improved surface finish consistency and reduced risk of unexpected tool failure. Technical terms: a negative rake reduces cutting-edge vulnerability by orienting the cutting forces into the insert body rather than the cutting edge. Practical application guidance and process confidence Intended primarily for stainless steel and heat-resistant superalloys, this insert is a pragmatic choice where durability and edge integrity are priorities. The grade is particularly effective when machining materials that tend to work-harden or generate high temperatures at the cutting zone. While the insert is versatile across turning operations, matching feed, depth of cut and coolant strategy to material behaviour will maximise life and part quality. For tailored machining parameters and to verify suitability for a given workpiece, consulting Metav Werkzeuge’s technical advisers is recommended — they can suggest cutting data and holder compatibility to ensure repeatable outcomes. Contact Metav Werkzeuge for a process review or tailored cutting data to exploit the Tiger‑tec Silver WSM01 advantages in your production. Technical Data SKU: WNMG080412-NRS-WSM01-WALTER Label: Drehwendeschneidplatte WNMG080412-NRS WSM01 Walter Tools Manufacturer: Walter Tools / Walter Deutschland GmbH Product type: Drehwendeschneidplatte (turning insert) Series: Tiger‑tec Silver Grade: WSM01 Chipbreaker: NRS Shape: Trigon 80° Free rake angle: 0° (negative) Corner radius: 1.2 Size code: 08 Thickness code: 04 Tolerance class: M Execution: G Material designation: S / M Numbers / Core technical data Corner radius: 1.2 mm Plate size code: 08 Plate thickness code: 04 Free angle: 0° Tolerance class: M Special features / Versions Coated cemented carbide grade WSM01 Tiger‑tec Silver coating for improved wear resistance NRS chipbreaker geometry for controlled chips Trigon 80° form for high radial support Suitable for stainless steel and heat‑resistant superalloys (ISO group M and S) FAQ Is this insert suitable for high-temperature alloys such as Inconel? The WSM01 grade with Tiger‑tec Silver coating is designed for heat‑resistant superalloys (ISO group S); it provides improved thermal resistance and edge stability for demanding materials. What advantages does the Trigon 80° form offer in roughing operations? The Trigon 80° geometry gives increased radial support and a stronger cutting edge, which enhances stability during roughing and interrupted cuts and helps maintain part accuracy. How should the 0° negative rake be used in practice? A 0° negative rake increases edge robustness; it is beneficial for interrupted cuts and heavier depths of cut, where edge strength outweighs the need for the lowest cutting forces. Which materials are recommended for this insert? Primary applications are stainless steel and heat‑resistant superalloys; the insert is configured to handle the poor heat conduction and high adhesive tendencies of these groups. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for clarification and comparison. There is no affiliation or partnership implied between Metav Werkzeuge and the named brands. The offered item is an original, factory‑new product of the stated manufacturer, Walter Tools.
WNMG080412-NRS WSM10S WSM10S Wendeplatten - Walter Tools
Benefit from a combination of Tiger·tec Silver coating and a robust NRS chipbreaker for consistent performance in demanding turning operations; the result is reliable chip control and extended edge life, supporting continuous production. Order the insert or contact Metav Werkzeuge for application advice and availability. WNMG080412-NRS WSM10S – Trigon 80° indexable turning insert (Tiger·tec Silver, Walter Tools) A WNMG080412-NRS WSM10S trigon insert engineered for heavy-duty turning of rostfreier Stahl and heat-resistant alloys with a stable cutting edge and predictable chip formation Tiger·tec Silver coating technology NRS chipbreaker for secure chip control Trigon 80° geometry for positive engagement 0° negative clearance angle for strength Consistent performance where heat and toughness matter This insert combines a coated cemented carbide grade with the Tiger·tec Silver technology to handle materials that generate heat and resist cutting. The WSM10S grade is optimised for machining rostfreier Stahl and superalloys, promoting stable chip formation and reducing the tendency for built-up edge. The design priority is process reliability: a NRS chipbreaker shapes chips for evacuation while the Trigon 80° form ensures secure seating and predictable cutting forces, which helps maintain part tolerances and reduces tool-change frequency. Controlled chips and stable cutting edge for uninterrupted production Thanks to the integrated NRS chipbreaker and a corner radius of 1.2 mm, the insert provides improved chip segmentation and edge reinforcement during interrupted cuts or tough feeds. The specified 0° (negative) clearance angle increases edge strength under heavy loads, lowering the risk of chipping in interrupted machining. For production environments focused on throughput, these features translate into longer tool life and fewer process interruptions, improving overall machining uptime and quality consistency. Rapid process integration and application-oriented benefits The Trigon 80° shape and the standard WNMG designation mean straightforward integration into common toolholders and toolpaths used in turning centres. The WSM10S grade supports a wide material range (S and M groups), which simplifies tooling inventory for mixed-production shops working on rostfreier Stahl, titanium and heat-resistant alloys. Where thermal load and abrasive wear are concerns, the Tiger·tec Silver coating contributes to edge protection and consistent surface finish, offering a balance between performance and economy for batch and continuous operations. Contact Metav Werkzeuge for tailored advice on using the WNMG080412-NRS WSM10S in specific rostfreier Stahl or superalloy applications, and arrange availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: WNMG080412-NRS-WSM10S-WALTER Product type: indexable turning insert Designation: WNMG080412-NRS ISO designation: WNMG080412-NRS WSM10S Series: Tiger·tec Silver Grade: WSM10S Manufacturer: Walter Tools Core specs Insert size: 08 Corner radius: 1.2 mm Plate thickness: 04 Clearance angle: 0° (negative) Geometry: Trigon 80° Tolerance class: M Materials & application Coating: Tiger·tec Silver Carbide grade: coated cemented carbide (WSM10S) Chipbreaker: NRS Material groups: S (heat-resistant alloys / titanium), M (rostfreier Stahl) Material code: S / M Shape: Trigon 80° FAQ What materials is this insert suitable for? The WNMG080412-NRS WSM10S insert is suitable for machining rostfreier Stahl (ISO group M) and heat-resistant superalloys and titanium (ISO group S), reflecting the grade's design for toughness and thermal stability. How does the NRS chipbreaker improve machining? The NRS chipbreaker on the WNMG080412-NRS WSM10S directs and segments chips to reduce entanglement and improve evacuation, which helps maintain steady cutting conditions and surface quality in turning operations. What is the benefit of the Trigon 80° geometry? Trigon 80° geometry provides a compact insert form with multiple cutting edges and secure holder seating; the shape supports effective engagement in turning and simplifies indexation of the cutting edges. Is the insert compatible with standard WNMG toolholders? Yes, the insert follows the WNMG designation and fits standard toolholders designed for this insert family, allowing straightforward replacement and re-indexing in common turning setups. Why choose the WSM10S grade with Tiger·tec Silver? The WSM10S grade, combined with Tiger·tec Silver coating, offers improved wear resistance and stable edge life for challenging materials, delivering a balance of process reliability and cost-effective performance for extended production runs. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080412-NRS WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WSM20S carbide grade combined with a secure NRS chipbreaker for stable machining of challenging alloys; procure the insert directly via Metav Werkzeuge or consult the team for application advice. WNMG080412-NRS WSM20S — Indexable turning insert Trigon 80° for rostfreier Stahl and superalloys | Walter Tools The WNMG080412-NRS WSM20S is an 80° trigon indexable turning insert engineered for high-process security when machining rostfreier Stahl and heat-resistant superalloys, offering a robust corner radius and a Tiger·tec Silver coated carbide grade. Tiger·tec Silver coated carbide grade WSM20S Trigon 80° geometry with 0° negative rake NRS chipbreaker for secure chip control Corner radius 1.2 mm for robust cutting edge Consistent edge life for demanding materials The Tiger·tec Silver coating and the WSM20S grade combine thermal stability and wear resistance to extend edge life when machining tough alloys. For applications in rostfreier Stahl and high-temperature superalloys, this coated carbide counters common problems such as workhardening and built-up edge formation. The result is fewer index changes, more predictable tool life and a measurable reduction in production interruptions — supporting process stability and lowering cost per part. Reliable chip control that improves surface quality The NRS chipbreaker is shaped to produce short, controllable chips in interrupted or continuous turning, reducing the risk of chip entanglement and protecting the workpiece finish. The Trigon 80° plate form combined with a corner radius of 1.2 mm delivers both strength at the cutting edge and improved surface integrity. Together these features support reproducible surface quality and minimise secondary operations, which benefits throughput and downstream handling. Designed for secure clamping and machining efficiency A 0° (negative) free angle and the standard WNMG seating ensure stable insert support in common toolholders, reducing vibration and promoting repeatable cutting conditions. The insert’s geometry and the Tiger·tec Silver technology enable higher cutting parameters on many heat-resistant alloys and rostfreier Stahl, which can translate into increased component output and shorter cycle times. Integration into existing turning setups is straightforward, enabling rapid process optimisation. Practical advantages for production environments With a compact plate size and defined tolerance class, the insert fits standard toolholder systems and simplifies inventory management. The combination of coated carbide grade, robust chip control and the trigon form offers a balance between performance and handling safety in industrial turning. For operations that require consistent results across batches, these features contribute to predictable tool behaviour and reduced scrap rates. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools Tiger·tec Silver inserts and to discuss optimal cutting data for rostfreier Stahl and superalloy machining — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: WNMG080412-NRS-WSM20S-WALTER SKU: WNMG080412-NRS-WSM20S-WALTER Product type: Drehwendeschneidplatte (indexable turning insert) Manufacturer: Walter Tools Grade/series: WSM20S / Tiger-tec Silver Execution: G Core specifications Plate form: Trigon 80° Free angle: 0° (negative) Corner radius: 1.2 mm Plate size: 08 Plate thickness: 04 Tolerance class: M Chipbreaker: NRS Material code: S / M Special features Coating: Tiger·tec Silver (coated carbide) Sort: WSM20S — designed for rostfreier Stahl and superalloys Application focus: heavy-duty and heat-resistant materials Series description: WSM20S is a coated carbide grade optimised for secure chip formation and edge stability FAQ What materials is this insert suitable for? The WNMG080412-NRS WSM20S insert is designed primarily for machining rostfreier Stahl and heat-resistant superalloys (ISO groups M and S), where thermal stability and edge control are critical. How does the NRS chipbreaker affect production? The NRS chipbreaker on this Walter Tools insert promotes short, manageable chips, which improves workshop safety and reduces downtime associated with chip control and workpiece damage. Which toolholders are compatible with the Trigon 80° format? Standard toolholders that accept WNMG‑format trigon inserts are compatible; the insert’s 0° negative free angle and defined seat dimensions ensure stable clamping and repeatable cutting conditions. What benefits does the Tiger·tec Silver coating provide? Tiger·tec Silver enhances thermal resistance and wear performance of the WSM20S grade, supporting longer tool life and more consistent machining when working with difficult alloys such as rostfreier Stahl and superalloys. Is this insert suitable for interrupted cuts? Yes — the combination of a robust corner radius, Trigon 80° geometry and the NRS chipbreaker makes the insert well suited to interrupted and continuous turning operations on challenging materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Mention of brand names serves explanatory purposes only; there is no affiliation between Metav Werkzeuge and the named manufacturers. The offered article is original, factory-new goods of the listed manufacturer.
WNMG080412-NRS WSM30S WSM30S Wendeplatten - Walter Tools
Benefit from the combination of high thermal resistance and a robust cutting edge for reliable machining of stainless steel and heat‑resistant alloys; the trigon 80° geometry and 1.2 mm corner radius deliver consistent surface quality and long tool life. Order the WNMG080412-NRS WSM30S directly via Metav Werkzeuge or ask our consultants if needed. WNMG080412-NRS WSM30S indexable turning insert – Trigon 80°, Tiger·tec Silver, Walter Tools WNMG080412-NRS WSM30S is an indexable turning insert tailored for heavy and demanding turning operations, optimised for stainless steel and heat‑resistant superalloys with a negative 0° relief and a 1.2 mm corner radius Tiger·tec Silver coated for high thermal resistance Optimised NRS chipbreaker for secure chip control Trigon 80° geometry with negative 0° relief 1.2 mm corner radius for durable cutting edge High thermal stability and wear resistance for continuous production The insert features Tiger·tec Silver coating on a coated carbide substrate, engineered to withstand elevated cutting temperatures and abrasive conditions. This results in improved process stability, reduced flank wear and fewer changeovers. The combination of coating technology and a robust substrate supports stable cutting edges when machining challenging materials, ensuring predictable tool life and less unplanned downtime. As a consequence, machining cycles in series production run more smoothly and with consistent quality. Geometry and chip control that reduce rework and tool loading The Trigon 80° shape with a negative 0° relief provides a rigid cutting geometry for interrupted cuts and heavy radial engagement. Matched with the NRS chipbreaker, the insert confines and breaks chips reliably, lowering the risk of built‑up edge and tool damage. Improved chip formation translates into fewer surface defects and reduced need for manual cleaning of workpieces, which supports higher first‑pass yields and more efficient downstream operations. Application range: robust for stainless steel and high‑temperature alloys Formulated for the ISO groups M and S, this grade is suitable for machining stainless steel as well as heat‑resistant superalloys and titanium. The WSM30S grade balances thermal resistance with edge stability, making it appropriate for both steady‑state turning and tougher intermittent cuts. By choosing this insert for demanding materials, process engineers gain a practical tool for maintaining cycle times while protecting the cutting edge against thermal degradation. Compatibility, tolerance and economic benefits for workshop workflows With a size designation of 08, thickness code 04 and tolerance class M, the insert integrates with standard trigon toolholders and clamping systems. The 1.2 mm corner radius offers a compromise between edge strength and surface finish, suitable for many general‑purpose to semi‑finishing tasks. The predictable wear behaviour and the Tiger·tec Silver technology help to lower total cost of ownership by extending usable life per edge and reducing frequency of tool changeovers. For toolrooms seeking repeatable performance, this insert supports higher machine utilisation and steadier output quality. For machining stainless steel and superalloys with Walter Tools' Tiger·tec Silver technology, contact Metav Werkzeuge for tailored application advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: WNMG080412-NRS-WSM30S-WALTER Article: WNMG080412-NRS WSM30S Type: indexable turning insert Brand: Walter Tools Series: Tiger·tec Silver Grade: WSM30S Facts Geometry: Trigon 80° Size designation: 08 Thickness designation: 04 Corner radius: 1.2 mm Relief angle: 0° Tolerance class: M Special features Coating technology: Tiger·tec Silver Chipbreaker: NRS Coated substrate: coated carbide Material suitability: stainless steel (M), superalloys/titanium (S) Negative relief for robust cutting action Optimised for thermal resistance and edge stability FAQ What materials can this insert machine effectively? The WNMG080412-NRS WSM30S from Walter Tools is designed for stainless steel and for heat‑resistant superalloys/titanium (ISO groups M and S), making it suitable for demanding turning tasks where thermal resistance is required. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius increases edge strength and improves resistance to fracture and chipping on the WNMG080412-NRS WSM30S, which helps maintain consistent surface quality in heavier cut conditions. Why is the NRS chipbreaker important for production? The NRS chipbreaker on this Walter Tools insert shapes and controls chips to prevent long swarf, reduce tool loading and lower the chance of built‑up edge, contributing to safer and more efficient machining. Is the trigon 80° geometry suitable for interrupted cuts? Yes. The Trigon 80° form with negative 0° relief provides rigidity and shock resistance, which is advantageous for interrupted cutting and operations with variable engagement. What tolerance and mounting details are relevant for tool selection? The insert is supplied in tolerance class M with size designation 08 and thickness code 04; these details help ensure proper seating in compatible trigon toolholders for repeatable clamping and concentricity. Manufacturer: Walter Tools; part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Mention of brand names serves explanatory purposes only and does not imply any affiliation. The offered item is an original, factory‑new product of the manufacturer.
WNMG080412-RM5 WMP20G RM5 Wendeplatten - Walter Tools
Take advantage of the combination of consistent cutting performance, the Tiger‑tec Gold coating and a geometry tailored for stainless applications to keep cycle times reliable and rework low. Order the insert directly via Metav Werkzeuge or consult our specialists for matching toolholders and process settings. WNMG080412-RM5 WMP20G Turning Insert, Trigon 80°, Tiger‑tec Gold – Walter Tools A WNMG080412-RM5 WMP20G indexable turning insert developed for robust machining of rostfreier Stahl under medium to demanding conditions Tiger‑tec Gold coated for extended tool life Optimised for rostfreier Stahl machining (M) Trigon 80° geometry with 1.2 mm corner radius Negative 0° rake for stable cutting performance Reliable performance for challenging stainless applications The combination of the WMP20G grade and Tiger‑tec Gold technology delivers a balance between wear resistance and toughness that is particularly valuable when machining rostfreier Stahl. The grade is a coated carbide designed to resist edge chipping and reduce built‑up edge, so the operator benefits from stable chip formation and longer effective tool life. For shops seeking predictable batch quality, this means fewer interruptions for insert changes and more consistent surface finishes over long cycles. Geometry that promotes stability and surface integrity The Trigon 80° form and 1.2 mm corner radius are chosen to combine good strength at the cutting edge with the ability to handle interrupted cuts often encountered in stainless operations. The negative 0° rake increases cutting edge robustness and reduces the tendency for the tool to dig in under heavy feed, which supports dimensional stability and lowers the risk of workpiece damage. Explained simply: the geometry trades a little cutting aggressiveness for reliable edge retention and improved part consistency. Coating and chipcontrol for efficient production The insert’s coating and the specified RM5 chipbreaker work together to control chip shape and evacuation when turning tough materials. Effective chip control shortens cycle times by preventing snarled chips and reduces secondary handling. The coated surface also decreases friction at the cutting zone, which can help to maintain cutting temperatures and reduce thermal load on the edge—this is especially relevant for rostfreier Stahl, which tends to generate higher heat during cutting. Practical benefits for shop floor integration Using this insert in appropriate toolholders and with tuned cutting parameters provides clear process advantages: steadier tool life, fewer surface defects and less downtime caused by edge failure. The insert’s design suits both continuous and moderately interrupted cuts, and its specification supports straightforward stocking: the grade, geometry and chipbreaker are commonly used in industrial turning applications, simplifying assortments and reordering. For precision rostfreier Stahl turning using Walter Tools’ Tiger‑tec Gold technology, contact Metav Werkzeuge for application-matched recommendations and availability at Metav Werkzeuge Technical Data Article number: WNMG080412-RM5-WMP20G-WALTER Designation: WNMG080412-RM5 WMP20G Manufacturer: Walter Tools Product type: Turning insert (Drehwendeschneidplatte) Series: Tiger‑tec Gold Grade: WMP20G Facts Tolerance class: M Plate form: Trigon 80° Corner radius: 1.2 mm Free angle / rake: 0° (negative) Plate size: 08 Plate thickness: 04 Chipbreaker: RM5 Special features Coated carbide grade (Tiger‑tec Gold) Application group: M (rostfreier Stahl) Suitable for medium to robust cutting conditions Optimised for stable chip formation and edge life Designed for industrial turning operations FAQ Which materials is this insert intended for? The WNMG080412-RM5 WMP20G insert is specified for rostfreier Stahl (ISO group M) and performs well under medium to robust stainless steel cutting conditions thanks to the Tiger‑tec Gold coating. What does the RM5 chipbreaker provide? The RM5 chipbreaker offers controlled chip formation and evacuation for many turning operations, reducing chip snarling and aiding continuous production flow when using this turning insert. How does the Trigon 80° geometry affect cutting? Trigon 80° geometry concentrates strength at the cutting edge while allowing effective approach angles for turning; combined with the 1.2 mm corner radius it enhances edge robustness and part finish consistency. Is this grade suitable for interrupted cuts? Yes—because of the negative 0° rake and the coated carbide construction of the WMP20G grade, the insert tolerates moderate interruption and shock better than more fragile, high‑feed geometries. What is the main benefit of the Tiger‑tec Gold series here? Tiger‑tec Gold promotes balanced wear resistance and toughness, which helps to avoid premature chipping and maintain a stable cutting edge when machining rostfreier Stahl. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (marketed as Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the listed manufacturers. The article offered is original, factory‑new merchandise of the manufacturer.
WNMG080412-RM5 WMP20S RM5 Wendeplatten - Walter Tools
Take advantage of reliable chip control and a robust geometry designed for stainless‑steel turning; the combination of the Tiger·tec Silver coating and the WMP20S grade ensures stable cutting edges and dependable tool life in medium to robust conditions. Order the WNMG080412-RM5 WMP20S directly via Metav Werkzeuge or ask the consultants for application advice. WNMG080412-RM5 WMP20S — Trigon 80° turning insert for stainless steel, Tiger·tec Silver, Walter Tools WNMG080412-RM5 WMP20S is a trigon turning insert optimised for machining stainless steel under medium to robust conditions, offering secure chip formation and wear resistance. WMP20S grade for stainless steel Tiger·tec Silver coating for wear resistance Trigon 80° form with 1.2 mm corner Negative 0° rake for robust edge Consistent performance for stainless‑steel turning The coated carbide WMP20S grade from the Tiger·tec Silver family is formulated to support reliable machining of stainless steel, where built‑up edge and heat generation can compromise results. The coating improves wear resistance and reduces friction at the cutting zone, which enhances process stability and extends cutting edge life. For workshops requiring predictable cycles and fewer tool changes, this insert offers a measurable benefit in uptime and component quality by promoting secure chip formation under mixed cutting conditions. Geometry and edge design that resist edge degradation The Trigon 80° plate form combined with a 1.2 mm corner radius delivers a sturdy cutting edge that tolerates interrupted cuts and higher radial forces. The negative 0° rake results in a reinforced edge angle, improving resistance to chipping when machining tougher stainless grades. The RM5 chipbreaker is tuned for controlled chip morphology in these materials, reducing entanglement and aiding evacuation. In practical terms, this geometry supports both stable roughing and reliable finish passes where edge integrity is critical. Productivity and application advantages in everyday use Designed for a broad band of stainless‑steel applications, the insert supports efficient turning in environments where consistency and repeatable results matter. The combination of grade and geometry reduces the frequency of edge deterioration, which in turn lowers process variability and scrap risk. Integration into standard indexable toolholders is straightforward, enabling quick indexing and minimal downtime. For manufacturers seeking a balance between tool life and machining performance, this indexable insert contributes to steadier cycle times and improved part surface quality. For tailored recommendations on using Walter Tools Tiger·tec Silver inserts in specific stainless‑steel applications, contact Metav Werkzeuge for technical guidance and fast delivery: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: WNMG080412-RM5-WMP20S-WALTER Designation: WNMG080412-RM5 WMP20S Series: Tiger·tec Silver Grade: WMP20S Chipbreaker: RM5 Shape: Trigon 80° Corner radius: 1.2 mm Relief angle: 0° (negative) Thickness: 04 Size: 08 Facts Applicable material group: M (stainless steel) Suitable for medium to robust cutting conditions Special features Coated carbide grade Tiger·tec Silver RM5 chip control for stainless steel Robust edge geometry for interrupted cuts Trigon 80° plate form FAQ What materials is this insert intended for? This insert is specified for stainless steel machining; the WMP20S grade and chipbreaker RM5 are optimised for secure chip formation in that material group. How does the RM5 chipbreaker help during turning? The RM5 chipbreaker controls chip shape and evacuation when machining stainless steel, reducing entanglement and improving consistency of the cutting process. What advantages does the Trigon 80° form provide? The Trigon 80° geometry offers a strong corner for robust cutting and good access for both roughing and general turning operations, while the 1.2 mm radius helps maintain edge stability. Is this insert suitable for interrupted cuts or heavy radial engagement? Yes, the negative 0° rake and reinforced edge geometry make it well suited to interrupted cuts and applications where chip control and edge strength are important. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision metalcutting tools and is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners. Brand names are mentioned solely for explanatory purposes; there is no business affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
WNMG080412-RM5 WMP30G RM5 Wendeplatten - Walter Tools
Take advantage of a high‑productivity grade with Tiger‑tec Gold coating, precise Trigon geometry and the RM5 chipbreaker for stable machining of rostfreier Stahl; order directly via Metav Werkzeuge or request application advice from our consultants. WNMG080412-RM5 WMP30G Trigon 80° turning insert, Tiger‑tec Gold – Walter Tools The WNMG080412-RM5 WMP30G is a Trigon 80° turning insert designed for robust finishing and medium-duty roughing of rostfreier Stahl, combining a negative relief geometry with a proven chipbreaker for consistent material removal Tiger‑tec Gold coating for extended tool life Optimised for rostfreier Stahl (ISO group M) Trigon 80° form for robust turning RM5 chipbreaker for reliable chip control Longer production runs with predictable tool life The Tiger‑tec Gold coating, together with the WMP30G carbide grade, provides a balance between wear resistance and edge stability that increases component throughput. Coated carbide reduces flank wear and helps maintain surface quality over extended cycles; this means fewer indexings and more uninterrupted machining time. For planners and buyers, the technical advantage translates into higher machine utilisation and lower tooling interventions per component lot. Secure chip control for continuous operation The RM5 chipbreaker is configured to promote short, controllable chips when machining rostfreier Stahl, reducing the risk of built‑up edge and improving evacuation from the cutting zone. Chip behaviour influences surface finish and tool life: stable chips protect the cutting edge and simplify downstream machining processes. In practice, this leads to fewer stoppages for clearing and a more predictable production rhythm on lathes and turn‑mill centres. Geometry that supports robust turning and accuracy The Trigon 80° form and negative 0° relief deliver a geometry that resists shock loads and supports stable cutting in interrupted cuts. A corner radius of 1.2 mm increases edge strength for tougher feeds while preserving dimensional control. These geometric choices reduce the chance of edge chipping during heavy engagement and contribute to consistent part tolerances across batches, which is essential for quality assurance in serial production. Application focus and material compatibility The grade is specifically tuned for ISO group M work — rostfreier Stahl — which tends to be tougher and to generate higher temperatures at the cutting edge. The combination of coated carbide and the selected chipbreaker helps to manage adhesion tendencies and thermal loads. For engineers assessing tool selection, the insert suits medium to robust conditions where repeatable surface finish and process security are required rather than ultrafine finishing at very low cutting pressures. For tailored application recommendations and current availability of Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge for precise tooling advice and delivery options: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: WNMG080412-RM5-WMP30G-WALTER Designation: WNMG080412-RM5 WMP30G Manufacturer: Walter Tools Product type: Turning insert (indexable insert) Series: Tiger‑tec Gold Numeric specifications Plate size code: 08 Plate thickness code: 04 Corner radius: 1.2 mm Relief angle: 0° (negative) Materials & special features Grade: WMP30G (coated carbide) Chipbreaker: RM5 Plate form: Trigon 80° Application group: rostfreier Stahl (ISO M) Tolerance class: M FAQ Is this insert suitable for continuous turning of rostfreier Stahl? The WNMG080412-RM5 WMP30G insert is designed for rostfreier Stahl and performs reliably in continuous turning when matched with appropriate feeds and coolant strategies. What benefit does the Tiger‑tec Gold coating provide? Tiger‑tec Gold on the WMP30G grade enhances wear resistance and edge stability, extending tool life and supporting consistent surface quality in stainless steel applications. Which chipbreaker should be selected for mixed finishing and light roughing? The RM5 chipbreaker included with this insert offers controlled chips for a range of cutting depths, making it suitable for both finishing and moderate roughing operations. Can this insert handle interrupted cuts and heavier engagement? Yes; the Trigon 80° geometry and negative relief improve resistance to shock loads, and the 1.2 mm corner radius increases edge robustness in intermittent cutting. How does the geometry affect surface finish and dimensional accuracy? The combined Trigon form and controlled chip formation support stable cutting conditions, which helps maintain repeatable surface finishes and tight dimensional tolerances across production batches. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are cited for explanation only and do not indicate any affiliation between our company and the mentioned brands. The offered article is an original, brand‑new product from the manufacturer.
WNMG080412-RM5 WSM10S RM5 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a specialised RM5 chipbreaker, and robust trigon geometry for reliable performance when machining stainless steels and heat‑resistant alloys; order directly via Metav Werkzeuge or consult our specialists for process integration. WNMG080412-RM5 WSM10S turning insert, Trigon 80°, Tiger·tec Silver – Walter Tools The WNMG080412-RM5 WSM10S is a Trigon 80° turning insert designed for turning applications on stainless steels and heat‑resistant superalloys, providing thermal stability and secure chip formation for industrial production. WSM10S Tiger·tec Silver coated grade for heat resistance RM5 chipbreaker for secure chip formation Trigon 80° insert, 1.2 mm corner radius Designed for stainless steels and superalloys Assured machining on stainless steels and superalloys The Tiger·tec Silver coating together with the WSM10S grade targets operations on stainless steels and difficult‑to‑machine superalloys. This combination improves thermal resistance and supports a stable cutting edge, which reduces the tendency for built‑up edge and flank wear. For production environments this translates into fewer tool changes and more consistent part quality, enabling predictable cycle times and improved process security in serial turning. Consistent chip control to reduce interruptions The integrated RM5 chipbreaker is engineered to promote reliable chip segmentation across a range of depths of cut typical for turning. Stable chip formation lowers the risk of entangled swarf and machine downtime. When paired with a coated cemented carbide grade, the chip geometry and edge preparation contribute to efficient heat management and consistent surface finish, so machining runs remain uninterrupted and operators gain measurable time savings. Stable geometry for repeatable edge life The Trigon 80° shape with a corner radius of 1.2 mm and a negative 0° rake angle provides a robust cutting geometry for medium‑to‑heavy turning tasks. A negative rake increases the strength of the cutting edge, making the insert more tolerant to intermittent cuts and variances in workpiece material. The hardened substrate and coating system are selected to deliver repeatable edge life and predictable wear behaviour, supporting process reliability in demanding production settings. Practical application advice for productive turning This indexable insert is best used where secure chip control and edge stability are priorities, for example in roughing and semi‑finishing of rostfreiem Stahl and high‑temperature alloys. Employ stable clamping and appropriate coolant strategies for optimal results. The overall design supports flexible cutting parameters: correct selection of feed and depth of cut will exploit the chipbreaker and coating benefits to maximise tool life and maintain consistent workpiece tolerances. Contact Metav Werkzeuge for tailored application recommendations and to secure Walter Tools Tiger·tec Silver inserts for current production requirements; Metav Werkzeuge can advise on cutting data and inventory availability. Technical Data Article number: WNMG080412-RM5-WSM10S-WALTER Designation: WNMG080412-RM5 WSM10S Type: Turning indexable insert (Trigon) Brand: Walter Tools Series: Tiger·tec Silver Facts Insert form: Trigon 80° Corner radius: 1.2 mm Thickness: 04 Size designation: 08 Rake/clearance: 0° (negative) Tolerance class: M Special features Grade/coating: WSM10S (Tiger·tec Silver) Chipbreaker: RM5 Suitable for: stainless steels (M) and heat‑resistant superalloys/titanium (S) Execution: G Substrate designation: S / M FAQ What materials is this insert suitable for? The WNMG080412-RM5 WSM10S insert from Walter Tools is suitable for stainless steels and heat‑resistant superalloys (ISO groups M and S), as indicated by the WSM10S Tiger·tec Silver grade. What benefits does the Tiger·tec Silver coating provide? Tiger·tec Silver on the WSM10S grade improves thermal resistance and contributes to a stable cutting edge, increasing tool life and supporting consistent surface finish during turning operations. How does the RM5 chipbreaker affect machining? The RM5 chipbreaker on this insert promotes secure chip formation and predictable swarf geometry, reducing the risk of entanglement and machine interruptions in continuous production. Is the negative 0° rake suitable for heavy cuts? Yes, the negative 0° rake and Trigon 80° geometry provide a robust edge capable of withstanding intermittent and heavier cuts, improving edge strength and process reliability. What production applications fit this insert best? This insert is designed for industrial turning tasks where thermal stability and chip control are essential—typical uses include roughing and semi‑finishing of rostfreiem Stahl and high‑temperature alloys. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered marks are mentioned for explanation and comparison only; there is no affiliation implied between Metav Werkzeuge and the named manufacturers.
WNMG080412-RM5 WSM20S RM5 Wendeplatten - Walter Tools
Take advantage of a wear‑resistant cutting grade and a stable Trigon geometry to maintain productivity when machining demanding materials; the combination of Tiger·tec Silver coating and the RM5 chipbreaker supports reliable chip formation and extended tool life. Order directly via Metav Werkzeuge or consult our specialists for application guidance. WNMG080412-RM5 WSM20S turning insert — Trigon 80°, Tiger·tec Silver coated, Walter Tools WNMG080412-RM5 WSM20S is a trigon‑form indexable insert designed for heavy and finish turning of difficult‑to‑machine alloys Tiger·tec Silver coated carbide Optimised RM5 chipbreaker Trigon 80° geometry for stability Suitability for rostfreier Stahl and superalloys Consistent productivity on difficult alloys The WSM20S grade from the Tiger·tec Silver series combines a multilayer coating with a carbide substrate to deliver improved wear resistance and heat protection. This enables longer cutting times on materials that generate high temperatures and tend to work‑harden, such as rostfreier Stahl and nickel‑based superalloys. The result is fewer tool changes, reduced downtime and a more predictable production flow. The coating technology mitigates abrasive wear and supports a stable cutting edge, which is particularly beneficial when machining parts that demand repeatable surface quality and dimensional accuracy. Geometry that enhances process reliability The insert’s Trigon 80° form and 1.2 mm nose radius offer a robust support base and reproducible contact conditions in the cutting zone. The 0° negative relief aids edge strength under interrupted cuts and heavy radial engagement, while the RM5 chipbreaker is tuned to produce controllable, segmented chips across a wide range of feeds. For planners and operators, these features translate into predictable tool behaviour: fewer vibrations, consistent chip evacuation and enhanced edge life. Technical terms: a chipbreaker channels the metal flow into smaller, manageable chips; a negative relief angle increases edge support, improving resistance to chipping during heavy cuts. Where this insert adds measurable value This trigon insert is especially suited to CNC turning applications where rostfreier Stahl and heat‑resistant alloys are encountered — for example, aerospace components, fasteners and medical parts where surface integrity matters. The coated carbide grade reduces flank and crater wear, supporting both roughing and semi‑finishing passes. For shops seeking to balance cost and performance, the insert’s combination of coating performance and robust geometry helps lower overall machining costs by extending the number of usable edges per insert and improving first‑pass yields. For application advice or to specify the Walter Tools WNMG080412‑RM5 WSM20S for a particular machining task, contact Metav Werkzeuge — Metav Werkzeuge’s specialists will advise on cutting data and clamping options; call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data SKU: WNMG080412-RM5-WSM20S-WALTER Designation: WNMG080412-RM5 WSM20S Manufacturer: Walter Tools Facts Nose radius: 1.2 mm Geometry: Trigon 80° Relief angle: 0° (negative) Plate size: 08 Plate thickness: 04 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WSM20S (coated carbide) Chipbreaker: RM5 Shape: Trigon 80° Material application: rostfreier Stahl (M), superalloys/titanium (S) FAQ What materials is this insert suitable for? The WNMG080412‑RM5 WSM20S is intended for rostfreier Stahl and heat‑resistant superalloys; the WSM20S grade is tuned to maintain a stable cutting edge under high temperatures. What does the RM5 chipbreaker achieve? The RM5 chipbreaker controls chip form to enable safe evacuation and reduced tangling, improving surface finish and protecting the toolholder during continuous production. Is the negative 0° relief suitable for roughing operations? Yes; the 0° negative relief increases edge support, making the insert resilient under heavier radial depths of cut and intermittent engagement typical of roughing passes. How does the Tiger·tec Silver series benefit machining performance? The Tiger·tec Silver coating enhances thermal protection and wear resistance, which prolongs edge life and supports stable machining of demanding alloys. Can this insert be used for finishing work? With the 1.2 mm nose radius and the coated grade, the insert performs well in semi‑finishing and finishing operations when appropriate feeds and speeds are applied. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the mentioned manufacturers. The offered item is an original, factory‑new product from Walter Tools.
WNMG080412-RM5 WSM30S RM5 Wendeplatten - Walter Tools
Take advantage of a robust, heat‑resistant coating and a secure chipbreaker geometry to maintain process stability when machining demanding materials; order directly via Metav Werkzeuge or contact the consultants for tailored advice. WNMG080412-RM5 WSM30S — Trigon 80° turning insert, Tiger·tec Silver (Walter Tools) WNMG080412-RM5 WSM30S is a coated turning insert for demanding applications in stainless steel and high‑temperature alloys, offering reliable chip control and a strong cutting edge. Tiger·tec Silver coating for thermal stability Designed for stainless steel and superalloys RM5 chipbreaker for consistent chip control Trigon 80° form with 1.2 mm corner radius High performance for demanding materials The combination of the Tiger·tec Silver technology and a coated carbide substrate delivers improved wear resistance and thermal stability during continuous operation. This insert is optimised for machining stainless steel and heat‑resistant superalloys (material groups M and S), where heat generation and work‑hardening are typical challenges. The result is a more predictable tool life and fewer interruptions in the machining sequence, which supports higher throughput and reduced downtime. Secure chip formation and surface quality Equipped with the RM5 chipbreaker, the insert ensures consistent chip control across a range of cutting conditions. Stable chip formation reduces the risk of built‑up edge and helps to preserve the cutting edge, contributing to a consistent surface finish on the workpiece. The Trigon 80° geometry and 1.2 mm corner radius provide a robust edge that withstands intermittent cuts and contributes to a repeatable, high‑quality result in serial production. Geometry tailored for process reliability The negative rake (0°) configuration increases edge strength for tougher machining operations, while the tolerance class M ensures reproducible dimensions for accurate tool setting and predictable toolholder fit. These characteristics make the insert especially suitable for industrial turning where process security and repeatability are priorities. Operators benefit from fewer adjustments and a straightforward integration into established turning cycles. Ease of selection and practical advantages As part of the Tiger·tec Silver series, this insert is available in a widely used WNMG080412-RM5 format, compatible with standard toolholders that accept Trigon 80° inserts. The clear material grading (S / M) and the visible chipbreaker designation simplify grade selection for applications involving stainless steel or titanium‑based alloys. The combination of coating, chip control and geometry supports a cost‑effective balance between productivity and tool life in industrial turning. Contact Metav Werkzeuge for a customised recommendation on the Walter Tools Tiger·tec Silver inserts and specification support for specific stainless steel machining tasks. Technical data Article number: WNMG080412-RM5-WSM30S-WALTER Designation: WNMG080412-RM5 WSM30S Series: Tiger-tec Silver Manufacturer: Walter Tools Product type: Turning insert Facts Plate form: Trigon 80° Size code: 08 Thickness code: 04 Corner radius: 1.2 mm Free angle: 0° (negative) Chipbreaker: RM5 Tolerance class: M Grade / sort: WSM30S Special features Coating technology: Tiger·tec Silver Substrate: coated carbide Material suitability: stainless steel (M), heat‑resistant superalloys and titanium (S) Application focus: secure chip formation, stable cutting edge Execution: G FAQ What materials is this insert suitable for? The WNMG080412-RM5 WSM30S insert from Walter Tools is designed for stainless steel and heat‑resistant superalloys/titanium (material groups M and S) as indicated by the Tiger·tec Silver grade. How does the RM5 chipbreaker affect machining? The RM5 chipbreaker on this turning insert promotes controlled chip formation and reduces the likelihood of built‑up edge, helping to maintain surface quality and extend the life of the cutting edge. What is the significance of the 0° (negative) free angle? The negative 0° free angle increases edge strength for interrupted or demanding cuts, delivering greater resistance to mechanical load and thermal stress during heavy machining. Can this insert be used with standard Trigon toolholders? Yes — the Trigon 80° form and the WNMG080412 designation correspond to commonly used holders for triangular inserts, facilitating integration into standard turning setups. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating enhances thermal resistance and wear protection, which supports stable performance when machining materials that generate high temperatures, such as stainless steel and superalloys. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and brand names are the property of their respective owners. Protected trademarks and trade names are used here for explanation and identification only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
WNMG080412-RP5 WKK10S WKK10S Wendeplatten - Walter Tools
High wear resistance and stable chip control ensure longer tool life and consistent finishes in abrasive cast-iron machining; combine the WKK10S grade with the RP5 chipbreaker for reliable short-chip formation and repeatable results. Order directly via Metav Werkzeuge or consult our application specialists for material-specific recommendations. WNMG080412-RP5 WKK10S trigon 80° turning insert, Tiger·tec Silver by Walter Tools The WNMG080412-RP5 WKK10S is a trigon 80° turning insert designed for productive machining of cast iron with a negative 0° rake and RP5 chipbreaker Tiger·tec Silver coating Optimised for cast iron RP5 chipbreaker for short chips Trigon 80° with 1.2 mm radius Maximise productivity in cast-iron turning The Tiger·tec Silver grade WKK10S combines a coated carbide substrate with a coating technology tuned for abrasive cast-iron work. This results in improved wear resistance and extended tool life, which in turn reduces downtime for insert changes and tool management. The RP5 chipbreaker is developed to promote short, manageable chips in brittle materials, lowering the risk of chip entanglement and contributing to a more predictable machining cycle. For production environments, this balance of wear control and chip form increases machining stability and repeatability. Consistent surface quality with stable cutting geometry A trigon 80° geometry offers a robust cutting edge and stable engagement in interrupted or continuous cuts. The 1.2 mm corner radius provides a compromise between edge strength and achievable surface finish, enabling consistent results across batches. The negative 0° rake increases edge robustness when facing tough cutting conditions typical of cast iron, while the plate form minimises vibration at the cutting zone. These characteristics together reduce scrap rates and improve the finished component’s dimensional conformity. Practical advantages for shop-floor implementation The insert’s specification and tolerance class M make it suitable for standard turning toolholders and indexable tooling systems, simplifying inventory and holder compatibility. The coded designation signals the exact chipbreaker, geometry and grade, which helps maintenance teams and buyers to standardise consumables. Where short chips and predictable tool life are priorities, the RP5-equipped trigon insert reduces manual chip handling and supports safer, uninterrupted operation in busy workshops. Application guidance and material fit This grade is engineered for the demands of cast iron; abrasive wear and short, breaking chips are typical characteristics of such materials and have been considered in the coating and chipbreaker design. The insert is therefore particularly suitable for grey and nodular cast irons where consistent chip control and edge life are required. When specifying cutting data, favour moderate cutting speeds and adequate coolant or chip evacuation strategies to preserve the coating’s performance and to sustain machining efficiency. Contact Metav Werkzeuge for tailored application advice and to source Walter Tools WNMG080412-RP5 WKK10S inserts; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: WNMG080412-RP5-WKK10S-WALTER Article designation: WNMG080412-RP5 WKK10S Manufacturer: Walter Tools Product type: Turning insert Facts Corner radius: 1.2 mm Plate size: 08 Thickness: 04 Free angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKK10S Chipbreaker: RP5 Plate form: Trigon 80° Suitable for: cast iron Execution: G Series: Tiger-tec Silver FAQ What materials is this insert intended for? The WNMG080412-RP5 WKK10S insert is intended primarily for machining cast iron; the WKK10S grade and RP5 chipbreaker are optimised for abrasive cast-iron behaviour. How does the RP5 chipbreaker help in production? The RP5 chipbreaker promotes short, easily managed chips when machining brittle materials, improving process reliability and reducing manual chip handling during production. Is the insert compatible with standard toolholders? Yes, the trigon 80° form and tolerance class M make the insert compatible with common indexable turning toolholders designed for WNMG-style plates. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating increases wear resistance and thermal stability in abrasive conditions, delivering longer tool life and more consistent performance in cast-iron turning. Which features support improved surface finish? The combination of a stable trigon geometry, a 1.2 mm corner radius and a robust coated grade contributes to repeatable surface quality and dimensional accuracy. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named manufacturers. The offered item is original and brand-new.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com