WNMG080412-RP5 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Silver grade and the RP5 chipbreaker for stable, efficient machining of cast iron; the Trigon 80° geometry and 1.2 mm corner radius provide rigidity and predictable tool life. Order the insert via Metav Werkzeuge or consult their technical team for application-specific advice. WNMG080412-RP5 WKK20S indexable turning insert, Trigon 80°, for cast iron — Walter Tools A WNMG080412-RP5 WKK20S turning insert designed for productive cast-iron turning applications within the Tiger‑tec Silver range, offering robust chip control and consistent surface quality. Tiger‑tec Silver grade WKK20S for cast iron Trigon 80° geometry for stable cutting RP5 chipbreaker, optimised chip control 1.2 mm corner radius, negative 0° rake Efficient, predictable cast-iron machining with a dedicated grade The insert from the Tiger‑tec Silver family combines a WKK20S coated carbide grade with geometry tuned for abrasive cast‑iron workpieces (ISO group K). This configuration reduces premature edge wear and maintains consistent cutting behaviour on the short, brittle chips typical of cast iron. The result is stable cutting with fewer edge changes and a predictable production rhythm, which supports higher machine utilisation and lower process costs. Reliable chip control that protects productivity The RP5 chipbreaker is designed to segment and guide chips away from the cut, decreasing the risk of chip re-cutting or entanglement. Improved chip control directly contributes to fewer interrupted cycles and reduces secondary operations such as manual chip clearing. For process planners this means greater repeatability and less risk of surface damage on the workpiece, so cycle times remain more consistent across batches. Coating and geometry for extended tool life The Tiger‑tec Silver coating provides thermal and adhesive wear resistance that extends usable life under typical cast‑iron conditions. Combined with a Trigon 80° shape that increases insert rigidity, the design allows for conservative to medium cutting data with confidence. The negative 0° rake contributes to a robust cutting edge, suitable where stable cutting forces and reliable edge strength are prioritised over very light finishing geometries. Practical design details that support shop-floor use Key form factors—insert size 08, thickness 04, and a 1.2 mm corner radius—offer a balance between strength and access in common turning setups. The three‑sided trigonal form provides multiple indexing positions, improving value per insert. The execution code G and tolerance class M indicate manufacturing consistency appropriate for industrial turning operations, simplifying toolholder selection and inventory management. For application advice on Walter Tools inserts or to check suitability for a specific cast‑iron grade, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 to discuss supply and technical parameters. Technical Data Article number: WNMG080412-RP5-WKK20S-WALTER Article designation: WNMG080412-RP5 WKK20S Manufacturer: Walter Tools Series: Tiger‑tec Silver Core data Insert size: 08 Thickness: 04 Corner radius: 1.2 mm Free angle / rake: 0° (negative) Nose angle: Trigon 80° Tolerance class: M Special features Grade: WKK20S (coated carbide, Tiger‑tec Silver) Chipbreaker: RP5 Material suitability: cast iron (ISO group K) Execution: G Product type: indexable turning insert (drehwendeschneidplatte) FAQ Which materials is this insert intended for? The insert is optimised for cast iron machining (ISO material group K); the WKK20S grade in the Tiger‑tec Silver range balances wear resistance and toughness for typical cast‑iron chips. What benefits does the RP5 chipbreaker provide? The RP5 chipbreaker improves chip segmentation and evacuation, reducing the risk of chip entanglement and supporting more consistent cycle times when turning abrasive materials. How does the Trigon 80° geometry affect cutting stability? The Trigon 80° geometry increases insert rigidity and contact area at the cutting edge, which helps maintain a stable cut and reduces vibration during interrupted or heavy cuts. What does the 1.2 mm corner radius mean for surface finish? A 1.2 mm corner radius offers a compromise between strength and finish; it supports robust edge life while delivering acceptable surface quality for many roughing and finishing passes on cast iron. How many usable edges does the insert offer? The trigonal form provides multiple indexable cutting edges, allowing several repositions before the insert must be replaced, which improves cost efficiency per cutting edge. Manufacturer: Walter Tools; Walter AG, Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080412-RP5 WPP05G WPP05G Wendeplatten - Walter Tools
High-performance Tiger·tec Gold coating and an RP5 chipbreaker combine to deliver reliable steel turning with consistent surface quality and extended tool life; efficient chip control reduces machining interruptions. Order directly via Metav Werkzeuge or consult our specialists for cutting parameters and rapid supply. WNMG080412-RP5 WPP05G – indexable turning insert for steel | Walter Tools WNMG080412-RP5 WPP05G is an indexable turning insert engineered for productive steel machining, offering robust geometry and a wear‑resistant coated carbide grade. Tiger·tec Gold coating for long tool life Optimised RP5 chipbreaker for stable chips Trigon 80° shape for robust engagement Corner radius 1.2 mm for consistent surface finish Predictable component quality through a wear‑resistant grade The combination of a coated carbide grade and precise geometry ensures repeatable results in demanding turning operations. The WPP05G grade, developed within the Tiger·tec Gold family, is optimised for steel machining and balances wear resistance with toughness to withstand typical heat and chip formation when cutting alloyed and unalloyed steels. This results in fewer indexings, longer stretches between tool changes and improved overall process reliability, which benefits batch production and jobbing shops alike. Reduced cycle times thanks to geometry and chip control A focused geometry delivers measurable efficiency. The Trigon 80° form with a corner radius 1.2 mm and a negative rake of 0° provides secure engagement and stable cutting forces, while the RP5 chipbreaker is designed to form short, controllable chips in steel applications. Together these features reduce interruptions from chip entanglement and enable higher feedrates where the machine and workholding allow, directly improving throughput without sacrificing surface integrity. The insert’s tolerance class M supports reliable seat fit and concentricity in toolholders. Engineered for steel — clear material suitability and easy selection Assigned to ISO group P, this insert is purpose‑made for steel turning (unalloyed and alloyed), accommodating the thermal and mechanical demands of such materials. The grade’s coating and base carbide composition improve edge stability and wear performance in steel, while the RP5 chip control aids in finishing and semi‑finishing operations. For workshop planners and production engineers, this means fewer process deviations and a straightforward grade choice for mixed steel programmes, aiding reproducible quality and shortened setup validation. Practical benefits for production and maintenance For users seeking dependable inserts for medium to heavy turning of steels, the combination of Tiger·tec Gold technology and robust trigon geometry delivers lower tooling costs per part through extended life and improved process stability. The design reduces rework and downtime associated with poor chip control. Toolroom managers will appreciate the straightforward grade selection and the insert’s compatibility with standard WNMG toolholders, simplifying inventory and enabling quicker tool changes on the shop floor. For reliable steel turning with Walter Tools’ Tiger·tec Gold grade, contact Metav Werkzeuge for tailored cutting data and fast supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: WNMG080412-RP5-WPP05G-WALTER Product label: Drehwendeschneidplatte WNMG080412-RP5 WPP05G Walter Tools Product type: indexable turning insert Series: Tiger‑tec Gold Facts Shape: Trigon 80° Size designation: 08 Thickness designation: 04 Corner radius: 1.2 mm Rake angle: 0° (negative) Special features Grade: WPP05G (Tiger·tec Gold) Chipbreaker: RP5 Tolerance class: M Material suitability: Steel (ISO P) Manufacturer brand: Walter Tools FAQ Is this insert suitable for both roughing and finishing in steel? The WNMG080412-RP5 WPP05G insert is designed for versatile use in steel; the RP5 chipbreaker and a 1.2 mm corner radius allow effective semi‑finishing and stable finishing when cutting parameters are adjusted for the required surface tolerance. What makes the WPP05G grade different from other grades? WPP05G, part of the Tiger·tec Gold family, combines a wear‑resistant coating with a carbide substrate to provide a balance of hardness and toughness specifically tuned for steel machining, improving edge life under typical steel cutting conditions. How does the Trigon 80° shape influence cutting forces? The Trigon 80° geometry offers a stronger cutting edge and better tool engagement, which helps distribute cutting forces more evenly and enhances stability on interrupted cuts and heavier turning tasks. Can the insert be used in standard WNMG toolholders? Yes, the insert designation WNMG080412-RP5 indicates a standard WNMG format compatible with holders designed for that geometry and size; the M tolerance class supports consistent seating accuracy. What chip‑control benefits does the RP5 chipbreaker provide for steel? The RP5 chipbreaker produces short, manageable chips in steel applications, reducing the risk of chip entanglement and easing chip evacuation, which supports uninterrupted cyclic operation and improved surface finishes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names and registered marks are mentioned for explanation only. There is no affiliation between our company and the named manufacturers. The offered item is an original, brand‑new product from the stated manufacturer.
WNMG080412-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance from the WPP10G grade, the stable Trigon 80° geometry and consistent chip control from the RP5 breaker to keep production running smoothly; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. WNMG080412-RP5 WPP10G — Indexable turning insert, Trigon 80°, for Stahl (Walter Tools) The WNMG080412-RP5 WPP10G is a trigon indexable insert engineered for high-productivity turning of Stahl, combining the Tiger·tec Gold coating and a robust geometry for reliable, repeatable performance. Tiger·tec Gold coated carbide for extended life Trigon 80° form for sturdy turning performance RP5 chipbreaker for consistent chip control 1.2 mm corner radius for improved edge stability Maximise machining uptime with a wear-resistant grade The combination of the Tiger·tec Gold coating and the WPP10G carbide grade delivers a measurable extension of tool life in typical turning operations on Stahl. The advanced multi-layer coating reduces flank wear and maintains cutting-edge integrity under thermal stress, which means fewer index changes and longer uninterrupted production runs. By choosing a coated grade that is optimised for heat and typical chip formation in Stahl, set-up frequency is lowered and overall machining efficiency improves. Stable geometry for secure turning and predictable results The Trigon 80° form and the 1.2 mm corner radius provide mechanical stability during cutting, reducing vibration and improving surface finish. The trigon shape offers three cutting corners per insert while a larger corner radius increases resistance to edge chipping when interrupted cuts occur. This results in more consistent dimensional accuracy and surface quality across batches, supporting tight tolerances and repeatable process capability on conventional and CNC lathes. Effective chip control for safer, cleaner machining The RP5 chipbreaker is designed to shape and break chips reliably when machining Stahl, improving evacuation and reducing risk of chip re-cutting. Controlled chip formation lowers the likelihood of tool damage and enhances operator safety. For processes where continuous chips can impede automation or affect coolant flow, a dedicated chipbreaker such as RP5 helps maintain stable cutting forces and contributes directly to predictable cycle times. Integration and application guidance for production use The insert is supplied in the WNMG format, compatible with standard toolholders for trigon inserts. With a negative rake angle of 0° and tolerance class M, it is suitable for general turning tasks in batch and serial production. The coated carbide construction and RP5 geometry make this insert particularly effective for medium to heavy finishing passes on Stahl where a balance of tool life and surface quality is required. When specifying cutter bodies and cutting parameters, select feeds and speeds that reflect the coated carbide’s strengths in heat resistance and wear behaviour for optimum results. Contact Metav Werkzeuge to confirm suitability for the intended application or to request cutting data and availability for this Walter Tools turning insert Technical data Article number: WNMG080412-RP5-WPP10G-WALTER Product type: Indexable turning insert (Drehwendeschneidplatte) Designation: WNMG080412-RP5 WPP10G Manufacturer: Walter Tools Core specifications Corner radius: 1.2 mm Negative rake angle: 0° Insert form: Trigon 80° Insert size: 08 Plate thickness: 04 Tolerance class: M Special features Tiger·tec Gold coating technology Grade: WPP10G (coated carbide) Chipbreaker: RP5 Series: Tiger-tec Gold Suitable material group: Stahl Robust edge for interrupted cuts FAQ What materials is this insert suitable for? The WNMG080412-RP5 WPP10G insert is designed primarily for machining Stahl, with the coating and grade tuned to the heat and chip characteristics of those alloys. What does WPP10G mean for performance? WPP10G denotes Walter Tools’ coated carbide grade in the Tiger·tec Gold family; it provides improved wear resistance and thermal stability for longer tool life in turning operations on Stahl. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker promotes reliable chip separation and evacuation when cutting Stahl, leading to safer, cleaner machining and more consistent cutting forces. Is the Trigon 80° form suitable for heavy cuts? Yes, the Trigon 80° geometry and 1.2 mm corner radius offer mechanical strength and edge stability that support medium to heavier finishing and roughing passes where robustness is required. Can this insert be used in automated production cells? The insert’s coated grade, stable geometry and chip control characteristics make it well suited to automated or semi-automated production lines, helping to reduce unplanned tool changes and maintain cycle-time consistency. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no connection between our company and the mentioned brands. The offered article is original, factory-new merchandise from the manufacturer. The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group.
WNMG080412-RP5 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Gold coating and the RP5 chipbreaker to achieve consistent performance in steel turning; the robust Trigon geometry and 1.2 mm corner radius support stable cuts and extended tool life. Order via Metav Werkzeuge or consult the specialists for application-specific advice. WNMG080412-RP5 WPP20G Turning insert — Tiger‑tec Gold, for steel, Walter Tools WNMG080412-RP5 WPP20G is a coated carbide turning insert designed for productive steel machining with a Trigon 80° geometry and RP5 chip control Tiger‑tec Gold coated carbide Trigon 80° insert geometry RP5 chipbreaker for steel 1.2 mm corner radius for stability Reliable cutting performance through advanced coating and substrate The combination of the Tiger‑tec Gold coating and a coated carbide substrate provides a balance between wear resistance and fracture toughness. This results in improved process stability when machining unalloyed and alloyed steel under typical heat and chip formation conditions. The coated surface reduces flank wear and helps to maintain a consistent cutting edge, which in turn supports longer tool life and fewer insert changes — a tangible efficiency gain on production lines where uptime and repeatability matter. Geometry that enhances stability and repeatable accuracy The Trigon 80° form delivers a favourable approach angle for a wide range of turning operations, while the 1.2 mm corner radius increases edge strength for interrupted cuts and roughing passes. The 0° relief (negative) design contributes to rigidity and reduces vibration in heavier cuts, making the geometry particularly suitable where dimensional fidelity and surface consistency are required. These geometric choices translate into steadier chip loads and a reduced risk of edge chipping, supporting predictable tool behaviour across batches. Controlled chip formation and cost‑efficient productivity The RP5 chipbreaker is engineered for effective chip control in the ISO P (steel) group, promoting short, easily evacuable chips under a variety of cutting conditions. Improved chip control lowers machine downtime due to chip-related issues and reduces manual handling or secondary operations for chip clearing. Together with the coated carbide grade, this chipbreaker contributes to a favourable cost‑per‑component ratio by enabling higher cutting parameters where appropriate and by stabilising tool life across mixed steel lots. Application scope and process guidance for seamless integration Classified for the ISO P group, the insert is suitable for a broad spectrum of steel turning tasks, from general turning to more demanding roughing operations where wear resistance and edge robustness are essential. The plate identification indicates a universal toughened grade within the Tiger‑tec Gold family, optimised for reliable chip formation and consistent surface finish. For new setups, a stepwise increase of cutting speed and feed while monitoring surface finish and tool wear will help determine the most productive window for any specific steel grade or machine setup. Discuss application requirements with Metav Werkzeuge for tailored recommendations on WNMG080412-RP5 WPP20G and optimised machining strategies — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: WNMG080412-RP5-WPP20G-WALTER Designation: WNMG080412-RP5 Full designation: WNMG080412-RP5 WPP20G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade / Sort: WPP20G Facts Insert shape: Trigon 80° Corner radius: 1.2 mm Relief angle: 0° (negative) Chipbreaker: RP5 Insert size: 08 Plate thickness: 04 Tolerance class: M Special features Coated carbide technology (Tiger‑tec Gold) Optimised for steel (ISO P) Robust edge for interrupted cuts Universal grade for productive machining FAQ What materials is this insert intended for? This turning insert is designed for machining steel and is classified for the ISO P material group; the grade WPP20G is optimised for the heat and chip formation typical of steel turning. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on the WNMG080412-RP5 WPP20G promotes controlled chip formation and evacuation in steel machining, reducing chip-related interruptions and supporting stable cutting conditions. Is the geometry suitable for roughing and finishing? The Trigon 80° form with a 1.2 mm corner radius offers a compromise between edge strength for roughing and the ability to achieve consistent finishes, making the insert versatile across roughing and general finishing tasks. Can the insert withstand interrupted cuts? Yes, the substantial corner radius and the coated carbide construction enhance resistance to chipping during interrupted cuts, improving reliability in more demanding turning operations. Which product family and brand produce this insert? This insert belongs to the Tiger‑tec Gold series and is supplied by Walter Tools under the designation WNMG080412-RP5 WPP20G. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Walter Tools is the brand representation of Walter AG and is recognised among the world’s leading manufacturers of precision tools for metalworking. The Walter AG (brand: Walter Tools) combines innovative coatings and substrate technologies to deliver process security, stable cutting edges and consistent productivity. Protected trademarks and trade names remain the property of their respective owners. Brand names are cited for explanatory purposes only and do not imply any affiliation between our company and the mentioned manufacturers. The offered item is original, factory‑new merchandise from the manufacturer.
WNMG080412-RP5 WPP30G RP5 Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold wear resistance, a robust Trigon 80° geometry and the RP5 chipbreaker for reliable, productive steel turning — order the WNMG080412-RP5 WPP30G directly via Metav Werkzeuge or consult the technical team if required. WNMG080412-RP5 WPP30G turning insert (Trigon 80°) for steel — Walter Tools WNMG080412-RP5 WPP30G is an indexable turning insert with Trigon geometry and a Tiger‑tec Gold coating, developed for productive machining of steels in general turning applications. Tiger‑tec Gold coated for high process security Trigon 80° shape for stable cutting geometry RP5 chipbreaker optimised for steel turning 1.2 mm corner radius for reliable edge life Greater throughput through a high‑performance coating The Tiger‑tec Gold technology delivers a coated carbide surface that significantly improves wear resistance under the thermal and mechanical stresses of steel turning. By resisting flank wear and crater formation, the grade enables longer tool life and fewer insert changes, which directly increases machine uptime. For production environments where consistent cycle times matter, the WPP30G grade offers a measurable advantage through stable performance on ISO P materials and a balance of toughness and hardness suited to a wide range of unalloyed and alloyed steels. Consistent geometry for stable, accurate turning The trigon 80° form provides a strong, versatile cutting edge that copes well with interrupted cuts and variable feed conditions. Combined with the RP5 chipbreaker, this geometry supports controlled chip formation and evacuation when machining steels, lowering the risk of built‑up edge and improving surface finish. The negative rake (0°) and the 1.2 mm corner radius contribute to edge robustness, so the insert maintains dimensional accuracy and reduces scrap rates in batch production or one‑off workpieces where repeatability is required. Practical adaptability and process benefits As a WNMG‑style indexable insert, this component simplifies inventory and tool management: one body holds multiple effective cutting edges, which reduces downtime for tool changes and supports lean production. The grade’s formulation is targeted at steel (ISO P) applications, meaning the insert is suitable for typical workshop and industrial turning tasks without the need for special fixtures. The RP5 chip control and the Trigon profile together support predictable behaviour in automated setups and manual turning alike, offering a dependable compromise between edge life and cutting performance. For procurement or detailed application advice on Walter Tools inserts such as the WNMG080412-RP5 WPP30G, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical support and ordering. Technical data SKU: WNMG080412-RP5-WPP30G-WALTER Label: Drehwendeschneidplatte WNMG080412-RP5 WPP30G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Grade/series: Tiger‑tec Gold Facts Corner radius: 1.2 mm Relief angle: 0° (negative) Insert size: 08 Thickness code: 04 Tolerance class: M Special features Coated carbide (beschichtetes Hartmetall) Grade: WPP30G Chipbreaker: RP5 Trigon 80° insert form Suitable for steel (ISO P) Series description: Tiger‑tec Gold FAQ What steels is this insert optimised for? The WNMG080412-RP5 WPP30G is optimised for ISO P materials, covering unalloyed and alloyed steels typically encountered in general turning operations. How does the Tiger‑tec Gold coating affect performance? Tiger‑tec Gold increases wear resistance and thermal stability of the insert, so the WPP30G grade maintains cutting edges longer and supports more consistent cycle times in steel turning. Is the RP5 chipbreaker suitable for continuous and interrupted cuts? Yes. The RP5 chip control is designed to manage chips reliably during a range of cutting conditions, offering controlled evacuation in both continuous and interrupted turning of steels. Can the insert be rotated to present a fresh cutting edge? The Trigon insert format provides multiple cutting edges; the WNMG form allows indexing to a fresh edge, reducing tool change frequency and improving productivity. What machining benefits are expected in production environments? Users can expect improved process reliability, fewer insert changes and more consistent surface quality thanks to the combination of geometry, chip control and the Tiger‑tec Gold coating. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
WNMG080412-RP7 WKP30S Wendeplatten - Walter Tools
Take advantage of Tiger‑tec Silver wear resistance and the WKP30S grade for reliable performance in steel and cast iron turning; the robust 80° trigon geometry with a 1.2 mm corner radius supports consistent chip control and long tool life. Order the turning insert directly via Metav Werkzeuge or consult our specialists for cutting-parameter recommendations. WNMG080412-RP7 WKP30S — Turning insert for steel and cast iron | Walter Tools The WNMG080412-RP7 WKP30S is a trigon-shaped indexable turning insert designed for productive machining of steel and cast iron in general turning applications. Tiger‑tec Silver coating for wear resistance WKP30S grade for steel and cast iron 80° trigon form with 1.2 mm radius RP7 chipbreaker for stable chip control Durable coating and grade for extended tool life The WKP30S cutting grade, implemented within the Tiger‑tec Silver technology, is a coated carbide solution optimised for machining both steel and cast iron in accordance with ISO 513 group designations P and K. The coating reduces adhesive and abrasive wear, which translates into more consistent component tolerances and fewer insert changes in serial production. By favouring predictable wear behaviour, this grade supports improved process economy and less unplanned downtime in machining centres. Geometry engineered for secure cutting and repeatability The 80° trigon shape combined with a 0° (negative) clearance geometry provides a robust engagement at the cutting zone, helping to maintain a stable cutting edge under interrupted or heavy cuts. The 1.2 mm corner radius increases strength at the cutting edge and improves surface finish where allowed by component geometry. The RP7 chipbreaker is tuned to produce short, controlled chips on a range of steels and grey irons, aiding automated chip evacuation and lowering the risk of tool damage during continuous operation. Production advantages and predictable performance In production environments where repeatability and process security are priorities, this Walter Tools insert offers consistent chip formation and good edge stability for general turning tasks. The combination of grade, coating and chipbreaker reduces the frequency of indexings and tool changes, which supports higher machine uptime and predictable cycle times. For shops seeking an insert that balances productivity with long tool life in mixed steel and cast iron workloads, this insert is a pragmatic choice that aligns with professional machining requirements. Contact Metav Werkzeuge for tailored cutting data and to secure genuine Walter Tools WNMG080412-RP7 WKP30S inserts via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: WNMG080412-RP7-WKP30S-WALTER Name: Turning insert WNMG080412-RP7 WKP30S Manufacturer: Walter Tools Product type: Turning insert Facts Corner radius: 1.2 mm Insert size: 08 Plate thickness: 04 Clearance angle: 0° (negative) Geometry: 80° trigon Tolerance class: M Special features Grade / series: WKP30S, Tiger‑tec Silver technology Chipbreaker: RP7 Material suitability: P / K (steel and cast iron) Execution: G FAQ Is this insert suitable for stainless steel? The WKP30S grade of the WNMG080412-RP7 WKP30S insert is specified for steel and cast iron (ISO groups P and K); stainless steel is not listed among the intended primary applications. What benefits does the Tiger‑tec Silver technology deliver? Tiger‑tec Silver coating on the WKP30S grade enhances wear resistance and edge stability, which helps the Walter Tools insert maintain dimensional accuracy and extend service life in production turning. How does the trigon 80° form affect indexing and edge use? The 80° trigon shape provides multiple usable cutting edges and a stable seating geometry; the form supports efficient indexing and repeatable positioning of the cutting edge in turning operations. Which chip behaviour is expected with the RP7 chipbreaker? The RP7 chipbreaker is designed to produce short, controlled chips on a range of steels and grey irons, improving chip evacuation and reducing the likelihood of entanglement during automated machining. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original factory‑new goods of the manufacturer.
WNMG080412-RP7 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of high process stability, a wear-resistant Tiger·tec Gold grade and a robust RP7 chipbreaker for consistent performance in steel turning. Order the insert directly via Metav Werkzeuge or consult our advisors for application recommendations. WNMG080412-RP7 WPP10G indexable turning insert – Tiger·tec Gold, for steel | Walter Tools A WNMG080412-RP7 WPP10G trigon insert engineered for medium to heavy steel turning, combining a negative rake and RP7 chip control for stable machining. Tiger·tec Gold coating for extended tool life Trigon 80° geometry for stable cuts RP7 chipbreaker for reliable chip control 1.2 mm corner radius for strong cutting edge Enhanced productivity through proven coated technology The combination of the Tiger·tec Gold coating and the WPP10G grade provides a measurable advantage in turning applications on steel. Coated carbide delivers higher wear resistance and thermal stability compared with uncoated grades, reducing flank wear and extending indexable insert life. The geometry and coating together help to maintain consistent cutting parameters over longer tool life, which supports shorter machine set-up intervals and fewer tool changes. As a result, cycle times can be optimised and overall throughput improved without sacrificing surface quality. Stable chip formation and secure cutting edge for demanding operations The Trigon 80° shape with negative rake 0° and the RP7 chipbreaker produce short, controlled chips suited to a wide range of turning depths and feeds. The 1.2 mm corner radius increases edge strength, improving resistance to chipping in interrupted or heavy-cut conditions. For workshop planners, this means dependable performance in serial production and reduced scrap risk. The insert’s design supports stable tool engagement, making it suitable for operations where repeatability and consistent part quality are priorities. Clear grade characteristics and material suitability explained The WPP10G designation denotes a Walter coated-carbide grade optimised for machining steel (ISO group P). In practical terms, the grade balances wear resistance and toughness to cope with typical heat and chip formation when turning unalloyed and alloyed steels. The specification indicates a focus on durability under continuous cutting loads while retaining enough fracture resistance for mixed-demand jobs. For users with varied component batches, this offers a reliable middle ground between aggressive wear performance and shape-holding longevity. Contact Metav Werkzeuge for original Walter Tools Tiger·tec Gold inserts and expert advice on cutting data and holder compatibility via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: WNMG080412-RP7-WPP10G-WALTER Designation: WNMG080412-RP7 WPP10G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Corner radius: 1.2 mm Plate size: 08 Relief angle: 0° (negative) Plate form: Trigon 80° Thickness: 04 Special features Grade: WPP10G (coated carbide) Chipbreaker: RP7 Material suitability: Steel (P) Tolerance class: M Shape: Trigon FAQ Which materials is this insert intended for? The WNMG080412-RP7 WPP10G insert from Walter Tools is specified for steel machining (ISO group P) and is optimised for the heat and chip-formation behaviour typical of unalloyed and alloyed steels. How does the RP7 chipbreaker affect machining? The RP7 chipbreaker promotes short, controlled chips and consistent evacuation, which reduces the risk of entanglement and improves surface finish during turning with the WNMG080412-RP7 insert. What are the advantages of the Trigon 80° geometry? The Trigon 80° form provides a robust cutting edge and stable engagement in axial and radial feeds, supporting heavier cuts and enhanced tool life under variable production conditions. What does the WPP10G grade offer in everyday use? The WPP10G coated-carbide grade balances wear resistance and toughness, delivering prolonged tool life in continuous steel turning while maintaining resistance to chipping on demanding features. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand presentation: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is original, factory-new goods from the manufacturer.
WNMG080412-RP7 WPP20G WPP20G Wendeplatten - Walter Tools
Combining the Tiger‑tec Gold coating, the RP7 chipbreaker and a robust corner radius of 1.2 mm delivers reliable cutting performance and extended tool life; order the insert directly via Metav Werkzeuge or consult their specialists for process-matched selection. WNMG080412-RP7 WPP20G – Indexable turning insert, Tiger‑tec Gold, Trigon 80° (Walter Tools) A WNMG080412-RP7 WPP20G indexable turning insert engineered for machining steel, featuring a Trigon 80° form and an RP7 chipbreaker for controlled chip formation. Tiger·tec Gold coating for extended tool life RP7 chipbreaker optimised for steel chips Trigon 80° form for versatile turning Corner radius 1.2 mm for robust edge strength Consistent performance and extended tool life through coating technology The combination of the Tiger‑tec Gold coating and the WPP20G grade provides a marked improvement in wear resistance during steel turning operations. The coated cemented carbide construction reduces flank and crater wear under typical cutting temperatures, which translates into longer cutting intervals and fewer index changes. This contributes to a steadier production flow and lower tooling-related downtime, delivering measurable gains in process efficiency for batch and continuous turning tasks. Predictable chip control and stable cutting behaviour The RP7 chipbreaker, paired with the Trigon 80° geometry and a 0° (negative) rake angle, is designed to produce short, consistent chips when machining steel. The corner radius 1.2 mm increases edge strength and resistance to mechanical shock, improving stability in interrupted cuts and heavier engagement scenarios. Together these features enable more predictable tool life and help maintain surface finish quality, supporting efficient spindle utilisation on CNC turning centres. Universal applicability and easy integration into turning setups Classified for steel (ISO group P), the insert offers a balance between toughness and wear resistance suited to a wide range of turning applications. The WNMG form factor and the size/thickness codes make the insert compatible with standard WNMG toolholders, allowing straightforward replacement and inventory management. The tolerance class M ensures consistent fit and repeatability at tool changes, supporting reproducible results across multiple machines and operators. For process-matched selection and cutting-data recommendations for this Walter Tools insert, contact Metav Werkzeuge quoting SKU WNMG080412-RP7-WPP20G-WALTER — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: WNMG080412-RP7-WPP20G-WALTER Label: Drehwendeschneidplatte WNMG080412-RP7 WPP20G Walter Tools Product type: Drehwendeschneidplatte Brand: Walter Tools Numbers Corner radius: 1.2 mm Free rake angle: 0° (negative) Insert form: Trigon 80° Size code: 08 Thickness code: 04 Tolerance class: M Design and features Series: Tiger‑tec Gold Grade: WPP20G (coated cemented carbide) Chipbreaker: RP7 Material application: Steel (P) Axial designation: WNMG080412-RP7 SKU: WNMG080412-RP7-WPP20G-WALTER FAQ Which materials is this insert intended for? The WPP20G grade is formulated for steel (P) in accordance with ISO group P; the insert is optimised for typical steel cutting temperatures and chip behaviour. What geometry and edge parameters does the insert have? The insert is a Trigon 80° form with a corner radius of 1.2 mm, 0° (negative) rake angle and the RP7 chipbreaker, offering robust edge strength and effective chip control. Is the cutting material coated? Yes, the grade is a coated cemented carbide within the Tiger‑tec Gold series, designed to enhance wear resistance and machining stability. How does the RP7 chipbreaker affect machining? The RP7 chipbreaker is configured to produce short, controlled chips when turning steel, improving cycle reliability and reducing the risk of chip-related interruption. Which toolholders are compatible with this insert form? The WNMG form factor corresponds to standard turning toolholders designed for WNMG inserts; the tolerance class M supports consistent seating and repeatable indexation. Protected trademarks and trade names are the property of their respective owners. Brand names such as Walter Tools are mentioned for explanation only; there is no affiliation between our company and the named manufacturers. The offered article is original, factory-new merchandise from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
WNMG080412-RP7 WPP30G WPP30G Wendeplatten - Walter Tools
The combination of a Tiger‑tec Gold coated carbide grade and the RP7 chipbreaker delivers reliable chip control and long tool life, while the 80° trigon geometry ensures stable cutting in steel applications; order the insert directly via Metav Werkzeuge or contact our consultants for tailored recommendations. WNMG080412-RP7 WPP30G — Trigon 80° Indexable Turning Insert for Steel (Walter Tools) The WNMG080412-RP7 WPP30G is a trigon 80° indexable turning insert engineered for steel turning, combining a coated carbide grade from the Tiger‑tec Gold series with an RP7 chipbreaker for controlled, repeatable performance Tiger‑tec Gold coated carbide 80° trigon geometry Excellent for steel machining 0° negative rake, 1.2 mm corner radius Maximise machining output with consistent chip control The Tiger‑tec Gold WPP30G grade is designed to balance wear resistance and toughness for common steel turning tasks. With the RP7 chipbreaker and the insert’s trigon outline, chip formation is predictable, reducing interruptions for manual chip handling. The robust coating improves heat resistance and edge stability, resulting in fewer indexings and more parts produced per insert change. This combination translates into higher productivity and lower machining downtime during serial production. Stable cutting performance through geometry and edge preparation The 80° trigon geometry and a 1.2 mm corner radius provide a strong cutting edge and improved engagement for interrupted cuts or heavy roughing passes. The 0° negative rake increases edge strength, which helps resist chipping when cutting unalloyed and alloyed steels. Users working with standard turning cycles will benefit from the insert’s ability to sustain stable cutting forces and maintain surface finish without frequent adjustments to cutting parameters. Practical advantages for process reliability and tool planning As a coated carbide insert from a recognised series, this product supports repeatable tool life and simpler tool management across batches. The WPP30G grade suits the thermal and chip-formation characteristics typical of steel machining, enabling predictable wear progression and easier replacement planning. For shops that prioritise process security and consistent part quality, the insert reduces the variability often associated with mixed-production environments. Compatibility and handling in the workshop The trigon-shaped indexable insert fits standard WNMG toolholder pockets and benefits from common clamping systems, simplifying tool inventory. Its nominal size and thickness support economical indexation: multiple usable edges per insert minimise tooling costs per part. When integrating into a new programme, verify the holder and clamping torque to achieve secure seating and repeatable concentricity; this avoids unexpected vibration and helps maintain the designed surface finish and dimensional accuracy. For application guidance or to specify tooling sets with Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and rapid delivery recommendations Technical data Article number: WNMG080412-RP7-WPP30G-WALTER Designation: WNMG080412-RP7 WPP30G Manufacturer: Walter Tools Core facts Insert size: 08 Thickness: 04 Corner radius: 1.2 mm Geometry: Trigon 80° Rake: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP30G (coated carbide) Chipbreaker: RP7 Execution: G Material application: Steel FAQ What steels is this insert suitable for? The WNMG080412-RP7 WPP30G is formulated for machining unalloyed and alloyed steel, matching the thermal and chip-formation behaviour typical of ISO group P materials. How does the RP7 chipbreaker influence performance? The RP7 chipbreaker on the Walter Tools insert promotes short, controlled chips and stable evacuation, which reduces stoppages and improves process reliability during medium to heavy turning operations. What does the 1.2 mm corner radius mean for cutting strategy? A 1.2 mm corner radius increases edge strength and is well suited to roughing and mixed finishing passes; it helps maintain surface integrity under fluctuating cutting loads. Can the insert be indexed in standard WNMG holders? Yes, the trigon WNMG‑format insert is compatible with standard WNMG toolholders designed for trigon 80° geometry; ensure correct clamping and seat condition for repeatable results. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) is part of a leading group in precision tooling. Protected trademarks and trade names belong to their respective owners. Brand names are used solely for descriptive purposes; there is no affiliation between Metav Werkzeuge and the listed manufacturers.
WNMG080416-MK5 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and a robust WKK10S grade for reliable cast-iron turning, offering stable chip control and extended tool life. Order directly via Metav Werkzeuge or contact our technical consultants for application advice. WNMG080416-MK5 WKK10S turning insert by Walter Tools — Tiger·tec Silver, for cast iron WNMG080416-MK5 WKK10S is a trigon-shaped turning insert designed for efficient machining of cast-iron materials, offering a negative 0° rake and a controlled chipforming geometry Tiger·tec Silver coating for wear resistance Optimised for cast iron (K) machining Trigon 80° geometry for robust cutting edges Chipbreaker MK5 for reliable chip control Increased process reliability for cast-iron turning The combination of the WKK10S coated-carbide grade and the Tiger·tec Silver technology provides consistent edge stability and predictable wear behaviour when machining abrasive cast-iron alloys. With a negative 0° free angle, the geometry favours heavy cuts and helps maintain a stable cutting edge under intermittent loads. This results in fewer tool changes and a smoother production rhythm, which benefits throughput and process planning. Predictable chip formation and surface results Equipped with the MK5 chipbreaker and a 1.6 mm corner radius, the indexable insert ensures controlled, short chips typical for cast-iron turning, reducing the risk of built-up edge and improving surface consistency. The trigon 80° form offers a strong cutting edge that tolerates deflection and shock, making the insert suitable for roughing operations where reliability and repeatable performance are essential. Practical benefits for workshop integration The insert's format supports straightforward toolholder selection and fast index changes, keeping set-up times low. The WNMG080416-MK5 WKK10S grade is aimed at applications where abrasive wear is a primary concern; the coating increases tool life, while the geometry simplifies surface finishing requirements downstream. For operators seeking a balance between productivity and longevity, this indexable solution provides a robust, low-fuss option. For machining tasks that demand stable chip control and extended tool life, contact Metav Werkzeuge to request availability or tailored application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: WNMG080416-MK5-WKK10S-WALTER Label: Drehwendeschneidplatte WNMG080416-MK5 WKK10S Walter Tools Manufacturer: Walter Tools Facts Grade: WKK10S Series: Tiger·tec Silver Geometry: Trigon 80° Free angle: 0° (negative) Corner radius: 1.6 mm Plate size: 08 Plate thickness: 04 Tolerance class: M Special features Chipbreaker: MK5 Coating: Tiger·tec Silver (coated carbide) Application: Cast iron (K) Product type: Turning insert (indexable) Execution: G FAQ What materials is this insert suitable for? The insert is optimised for cast iron; the Walter Tools WKK10S grade is specifically formulated for abrasive wear and short, breaking chips common with cast-iron machining. How does the MK5 chipbreaker affect machining? The MK5 chipbreaker on this trigon insert promotes short, controlled chips and reduces the chance of long, entangling swarf, improving process safety during cast-iron turning. Is the insert suitable for heavy roughing cuts? Yes. The 80° trigon geometry combined with a negative 0° free angle provides robust cutting edges that tolerate heavier engagement and intermittent loads. What advantage does the Tiger·tec Silver coating provide? Tiger·tec Silver coating enhances wear resistance and heat tolerance, which helps to extend the tool life and maintain dimensional stability over longer production runs. Can this insert be used in standard WNMG toolholders? The WNMG format corresponds to industry-standard trigon holders; verify holder compatibility with the WNMG080416-MK5 designation before mounting. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Brand names and protected trademarks are the property of their respective owners. The Walter Tools brand is mentioned for product identification purposes only. The offered article is an original, brand-new product from the manufacturer.
WNMG080416-MK5 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, controlled chip formation and robust trigon geometry for reliable cast iron turning—order directly via Metav Werkzeuge or consult our specialists for application advice. WNMG080416-MK5 WKK20S – Turning indexable insert, Tiger‑tec Silver, for cast iron (Walter Tools) A WNMG080416-MK5 WKK20S turning indexable insert engineered for productive machining of cast iron, featuring a Trigon 80° geometry and a MK5 chipbreaker for stable chip control. Tiger‑tec Silver coated carbide grade WKK20S Trigon 80° plate with 1.6 mm corner radius MK5 chipbreaker for controlled chip formation Optimised for cast iron machining Consistent performance for abrasive cast iron applications The coated carbide grade WKK20S, part of the Tiger‑tec Silver series, focuses on abrasion resistance and consistent edge life when machining cast iron. The composition and coating technology reduce flank and crater wear under repetitive conditions, which translates into longer service intervals and fewer index changes during production runs. With a coated carbide construction and a design tuned for short, brittle chips, the insert supports predictable tool life and process stability in heavy-duty turning tasks. Geometry and chip control that increase process reliability The Trigon 80° plate form combined with the MK5 chipbreaker provides mechanical strength at the cutting edge and efficient chip segmentation for cast iron’s often brittle swarf. The insert’s 1.6 mm corner radius enhances edge robustness, while the 0° (negative) rake angle contributes to a stable cutting edge under intermittent or interrupted cuts. These characteristics reduce the likelihood of edge chipping and support consistent surface finish, making the insert well suited to demanding production environments where repeatable results are essential. Practical benefits and application guidance for production use Specified as an indexable turning insert for cast iron, the design balances wear resistance with reliable chip evacuation to maintain cycle times and component quality. The combination of grade, chipbreaker and geometry yields lower downtime through fewer insert changes and simplified process parameter setup. For best results, select cutting speeds and feeds in line with cast iron recommendations and monitor edge condition; the insert’s properties make it particularly effective for batch production and series turning where consistent performance is required. Contact Metav Werkzeuge for tailored application advice and current availability of Walter Tools WNMG080416-MK5 WKK20S inserts Technical Data Article number: WNMG080416-MK5-WKK20S-WALTER Designation: WNMG080416-MK5 WKK20S Manufacturer: Walter Tools Facts Plate form: Trigon 80° Corner radius: 1.6 Plate size: 08 Plate thickness: 04 Rake/freestanding angle: 0° (negativ) Chipbreaker: MK5 Grade/series: WKK20S / Tiger‑tec Silver Application indication: cast iron (ISO group K) Tolerance class: M Special features Coated carbide grade WKK20S Tiger‑tec Silver coating technology Designed for abrasive wear in cast iron Robust trigon geometry for strength MK5 chipbreaker for controlled chips FAQ Which materials is this insert suitable for? The WNMG080416-MK5 WKK20S insert is optimised for machining cast iron (ISO group K) and is designed to handle abrasive wear typical of those materials. What are the main geometric characteristics of the insert? This trigon-shaped insert features a Trigon 80° form, a 1.6 mm corner radius and a 0° (negative) rake angle for a strong cutting edge. What role does the MK5 chipbreaker play? The MK5 chipbreaker promotes reliable chip segmentation and evacuation when turning cast iron, improving process stability and surface quality. How does the Tiger‑tec Silver coating benefit production? The Tiger‑tec Silver coating increases wear resistance and edge life under abrasive conditions, supporting longer index intervals and more consistent machining results. Is this insert suitable for interrupted cuts? The combination of trigon geometry, a sturdy corner radius and the negative rake angle provides enhanced edge strength, making the insert suitable for many interrupted cutting scenarios. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Protected brand names and product designations are mentioned for clarification purposes only; there is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
WNMG080416-MM5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of a high-performance, coated carbide grade combined with a sturdy Trigon 80° geometry and a dedicated MM5 chipbreaker for reliable machining of stainless steel; order the inserts via Metav Werkzeuge or consult the Metav team for tailored cutting data and application support. WNMG080416‑MM5 WMP20G — Trigon 80°, for stainless steel | Walter Tools WNMG080416‑MM5 WMP20G is a trigon turning insert designed for medium to robust stainless steel applications, delivering stable chip formation and predictable tool life under challenging machining conditions. Tiger·tec Gold coated carbide for heat resistance Robust Trigon 80° form for secure edge support MM5 chipbreaker for controlled chip formation 1.6 mm corner radius for strength and surface integrity High process stability for stainless steel turning The Tiger·tec Gold grade WMP20G is a coated carbide solution optimised for stainless steel, where material toughness and a tendency to form built-up edge present particular challenges. The coating and substrate combination promotes heat resistance and a stable cutting edge, which reduces the risk of premature edge failure and improves flank wear behaviour. By supporting consistent chip formation, the grade helps maintain component surface quality and extends in‑service intervals, making it a reliable choice where reproducible results are required. Geometry that increases productivity and part quality The insert’s Trigon 80° outline and sizable corner radius 1.6 mm provide enhanced insert strength and improved contact area at the cutting edge. The 0° (negative) relief angle delivers robustness in interrupted cuts and heavy engagement, while the MM5 chipbreaker was developed to generate short, controllable chips across a range of feeds commonly used on stainless grades. This geometry combination reduces vibration and supports higher stable cutting parameters, which in turn helps shorten cycle times without compromising surface finish. Versatile performance for workshop routines This grade is intended for medium to robust cutting conditions, offering processors a pragmatic balance between wear resistance and edge toughness. The solution is suited to series production as well as demanding single‑part machining where stainless workpieces require dependable machining behaviour. The insert’s features promote process security and ease of tool‑choice documentation, simplifying inventory management and tool‑holder programming within mixed‑material production environments. Practical recommendations to maximise tool life To make the most of this insert, ensure secure clamping and favour steady, vibration‑free setup; coolant or controlled flood lubrication is recommended where compatible with the workpiece and process to assist chip evacuation and temperature control. The MM5 chipbreaker excels with stable feed rates and moderate depths of cut; if surface requirements are critical, monitor flank wear and replace inserts before wear affects finish. Regular inspection and adherence to recommended tool‑holder alignment will preserve the stable cutting edge characteristics and prolong productive service life. Discuss application specifics with Metav Werkzeuge for optimised cutting data and prompt supply of Walter Tools Tiger·tec Gold inserts — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: WNMG080416-MM5-WMP20G-WALTER Designation: WNMG080416-MM5 WMP20G Product type: Drehwendeschneidplatte (turning insert) Manufacturer: Walter Tools Facts Corner radius: 1.6 mm Relief angle: 0° (negative) Insert size: 08 Thickness: 04 Special features Grade: WMP20G Series: Tiger·tec Gold Chipbreaker: MM5 Coating / substrate: coated carbide Suitable for: stainless steel (M) Platen form: Trigon 80° FAQ What materials is this insert best suited for? The WNMG080416‑MM5 WMP20G insert from Walter Tools is designed primarily for stainless steel, where its Tiger·tec Gold coating and chipbreaker support secure chip formation and reduced built‑up edge. How does the MM5 chipbreaker affect machining? The MM5 chipbreaker on this insert generates controlled, short chips under typical feeds for stainless steel, improving chip evacuation and enabling more stable cutting conditions with the Walter Tools Trigon insert. What does the 0° (negative) relief angle mean for use? A 0° (negative) relief provides a robust cutting geometry that resists edge chipping in interrupted cuts and heavy engagements; the WNMG080416‑MM5 WMP20G benefits from this for more demanding operations. Is the corner radius of 1.6 mm suitable for finishing? The 1.6 mm corner radius offers an excellent compromise between edge strength and surface quality; for very fine finishing passes a smaller radius may be preferred, but this radius supports durable, repeatable finishes in production. Can this insert be used in automated production cycles? Yes, the coated grade and the MM5 chip control characteristics make the insert appropriate for series production where consistent tool life and reliable chip behaviour are required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
WNMG080416-MM5 WSM20S MM5 Wendeplatten - Walter Tools
High wear resistance from the Tiger·tec Silver coating combined with a robust Trigon 80° geometry and a 1.6 mm corner radius delivers secure chip control and long tool life when machining stainless steel and heat‑resistant superalloys. The combination of heat‑resistant coating and a stable cutting edge supports productive turning operations. Order the WNMG080416-MM5 WSM20S directly via Metav Werkzeuge or ask our consultants if needed. WNMG080416-MM5 WSM20S – Indexable turning insert, Trigon 80°, Tiger·tec Silver (Walter Tools) The WNMG080416-MM5 WSM20S is an indexable turning insert engineered for heavy‑duty and difficult‑to‑machine materials, optimised for stainless steel and high‑temperature superalloys. Tiger·tec Silver coated carbide grade WSM20S Trigon 80° shape for heavy turning 0° negative rake for stable cuts 1.6 mm corner radius for extended life Maximised performance for demanding materials The Tiger·tec Silver coating and the WSM20S grade combine to provide high thermal stability and wear resistance during continuous cutting. For materials that tend to work‑harden or retain heat—such as stainless steel and other stainless alloys—the coated carbide substrate supports stable cutting edge behaviour and reduces the risk of built‑up edge. This results in fewer interruptions for tool changes and a more consistent component surface finish, translating directly into improved shop productivity. Geometry that creates reliable process security The Trigon 80° plate form and 0° negative rake deliver a geometry optimised for rigidity and vibration damping in interrupted and heavy turning. A corner radius of 1.6 mm increases edge strength, which reduces chipping in tough conditions and supports longer intervals between reprofiling. In practice, this geometry means more reliable cycle times and predictable tool life in series production, allowing process engineers to plan machining windows with confidence. Coating and chip control explained for production The coated carbide composition of this insert is designed to combine heat resistance with a robust substrate. The Tiger·tec Silver technology provides a multi‑layer protection that helps maintain the cutting edge at elevated temperatures, while the MM5 chipbreaker supports controlled chip formation in long, stringy materials. For operators less familiar with coatings: a high‑temperature stable coating delays abrasive and adhesive wear, which reduces rework and improves overall component quality. Practical application and integration in the workshop As an indexable insert, the component fits standard tool holders that accept WNMG‑style plates; the standardised geometry simplifies replacement and inventory management. The WSM20S grade is suitable where a compromise between toughness and temperature resistance is required—typical uses include turning operations on components containing austenitic stainless steels and certain superalloys. Selecting the correct holder and cutting parameters remains essential; machining partners benefit from a short trial cut to confirm optimal feed and speed for the specific workpiece material. Contact Metav Werkzeuge to discuss Walter Tools inserts, application parameters and toolholder compatibility for the WNMG080416-MM5 WSM20S or to request tailored cutting data for specific stainless steel grades. Technical data SKU: WNMG080416-MM5-WSM20S-WALTER Manufacturer: Walter Tools Product type: Drehwendeschneidplatte / indexable turning insert Series: Tiger-tec Silver Grade: WSM20S Shape: Trigon 80° Size: 08 Chipbreaker: MM5 Relief angle: 0° (negativ) Corner radius: 1.6 Core specifications Corner radius: 1.6 mm Relief angle: 0° (negative) Plate size: 08 Thickness: 04 Tolerance class: M Material groups: S / M Special features Coated carbide grade WSM20S Tiger·tec Silver coating technology Optimised for stainless steel and superalloys Robust edge for productive turning and stable chip formation FAQ What materials is this insert designed for? The WNMG080416-MM5 WSM20S is designed primarily for stainless steel (ISO group M) and for heat‑resistant superalloys (ISO group S), providing a balance of heat resistance and edge stability. What does the MM5 chipbreaker achieve? MM5 is a chipbreaker geometry that supports controlled chip formation and evacuation, helping to avoid long, uncontrolled chips when machining tough alloys with the WSM20S grade. How does the Tiger·tec Silver coating influence performance? Tiger·tec Silver increases the thermal and wear resistance of the coated carbide, which helps to maintain a sharp, stable cutting edge under elevated temperatures and abrasive conditions. Is the Trigon 80° shape suitable for heavy cuts? Yes, the Trigon 80° form provides rigidity and strength at the cutting edge, making it well suited to heavy and interrupted turning tasks when combined with the 0° negative rake. How should toolholders be selected for this insert? Select a toolholder compatible with WNMG‑style inserts and ensure correct clamping torque and geometry alignment; the insert’s dimensions (size 08, thickness 04, 1.6 mm corner radius) should match the holder seat. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no connection between our company and the mentioned brands. The offered item is an original factory‑new product of the manufacturer.
WNMG080416-MM5 WSM30S WSM30S Wendeplatten - Walter Tools
WNMG080416-MM5 WSM30S Drehwendeschneidplatte von Walter Tools WNMG080416-MM5 WSM30S bietet präzise Zerspanung für rostfreie Stähle und hitzebeständige Superlegierungen Universell einsetzbar für rostfreie Stähle und Titanbearbeitung Trigon 80° Form für stabile Schnittrichtung Spanformer MM5 für kontrollierte Spanbildung Eckenradius 1,6 für verbesserte Standzeit Tiger·tec Silver Beschichtung für lange Werkzeugstandzeit Höhere Produktivität durch robuste Schneidstoffauslegung Die WNMG080416-MM5 WSM30S Drehwendeschneidplatte kombiniert die moderne Tiger·tec Silver Beschichtung mit einer optimierten Spanformer-MM5 Geometrie. Dadurch wird die Spanbildung stabilisiert und die Schneidkante geschützt, was in Serienfertigungen zu geringeren Stillstandszeiten führt. Anwender profitieren direkt von höherer Produktivität und planbarer Werkzeugstandzeit. Verlässliche Bearbeitung von rostfreien Stählen und Superlegierungen Für die Bearbeitung von rostfreien Stählen (M) und hitzebeständigen Superlegierungen/Titan (S) ist die Sorte WSM30S ausgelegt. Die negative Freiwinkelgeometrie 0° ermöglicht sichere Schnitte bei hohen Zerspanungsbedingungen, während der Eckenradius 1,6 die Belastungsverteilung an der Schneidkante verbessert. Das Resultat ist eine konstante Oberflächengüte und reduzierte Nacharbeit. Einsetzbar in anspruchsvollen Serien- und Einzelteilen Die Trigon‑Form 80° und die Ausführung G machen die Platte kompatibel mit vielen Werkzeughaltern für Drehzentren. In Kombination mit der beschichteten Hartmetallklasse liefert die Wendeschneidplatte planbare Standzeiten und Wirtschaftlichkeit bei Fertigungsprozessen. Diese Eigenschaften machen sie zur geeigneten Wahl für Anwender, die wiederholgenaue Ergebnisse und Prozesssicherheit erwarten. Empfehlung: Für produktive Drehbearbeitung mit rostfreien Stählen die Sorte WSM30S aus der Tiger·tec Silver Serie wählen und technische Beratung über eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 anfragen Leistungsmerkmale Artikelnummer: WNMG080416-MM5-WSM30S-WALTER Marke: Walter Tools Serie: Tiger-tec Silver Bezeichnung: WNMG080416-MM5 WSM30S Produktart: Drehwendeschneidplatte Ausführung: G Plattenform: Trigon 80° Plattengröße: 08 Daten Eckenradius: 1,6 mm Freiwinkel: 0° (negativ) Plattendicke: 04 Toleranzklasse: M Besonderheiten Baureihe: Tiger-tec Silver Sorte: WSM30S Spanbrecher: MM5 Material: S / M Bearbeitbar: Rostfreie Stähle (M) Bearbeitbar: Hitzebeständige Superlegierungen und Titan (S) FAQ Für welche Werkstoffe ist die WNMG080416-MM5 WSM30S besonders geeignet? Die WNMG080416-MM5 WSM30S von Walter Tools ist speziell für rostfreie Stähle und hitzebeständige Superlegierungen/Titan ausgelegt und bietet durch die Tiger·tec Silver Technologie gute Schneidkantenstabilität. Welche Vorteile bietet die Tiger·tec Silver Beschichtung? Die Tiger·tec Silver Beschichtung der Wendeschneidplatte WNMG080416-MM5 WSM30S verbessert die Wärmebeständigkeit und trägt zu längeren Standzeiten sowie konstanter Bearbeitungsqualität bei. Wie beeinflusst der Eckenradius 1,6 die Bearbeitung? Der Eckenradius 1,6 verteilt Schnittkräfte auf eine größere Fläche, reduziert Kerbwirkung und trägt so zur erhöhten Standzeit und besseren Oberflächengüte bei. Ist die Geometrie mit Standardhalterungen kompatibel? Die Trigon 80° Form und die Ausführung G der WNMG080416-MM5 WSM30S sind für gängige Drehhalter und -applikationen ausgelegt und eignen sich für Serien‑ wie Einzelteilfertigung. Welche Rolle spielt der Spanformer MM5? Der Spanformer MM5 kontrolliert die Spanbildung gezielt und verhindert Aufbauschneiden; das sorgt für sichere Zerspanungsprozesse, insbesondere bei schwer zerspanbaren Werkstoffen. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080416-MP5 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating, the MP5 chipbreaker and the Trigon 80° geometry for durable, process‑secure steel turning; order the insert directly via Metav Werkzeuge or consult our technical team for application advice. WNMG080416-MP5 WPP10G indexable turning insert by Walter Tools — for steel machining WNMG080416-MP5 WPP10G is an indexable turning insert designed for stable, productive machining of steel in general turning applications Tiger·tec Gold coating for long tool life MP5 chipbreaker for reliable chip control Trigon 80° geometry for stable turning Suitable for steel machining (ISO P) Delivering productivity and predictable results in steel turning The combination of the Tiger·tec Gold coating and the WPP10G grade provides a balance between wear resistance and toughness that translates into longer tool life and consistent component quality when machining steel (ISO P). The coated carbide substrate reduces flank and crater wear under typical steel cutting temperatures, which helps maintain dimensional accuracy over extended tool life. For machining operations where repeatability and low tooling costs per part matter, this insert contributes to measurable productivity gains and reduced downtime. Geometry and chip control that stabilise the cut The Trigon 80° profile and the MP5 chipbreaker are engineered for mechanical stability and efficient chip formation. An 80° approach angle increases the radial support of the insert, reducing tool deflection in medium to heavy cuts, while the MP5 chipbreaker shapes and evacuates chips reliably to reduce entanglement and burrs. The insert’s 1.6 mm corner radius and 0° negative relief combine edge strength with predictable engagement behaviour, which is particularly helpful in interrupted cuts or when robustness is required. Coating and grade technology for lower tooling costs The Tiger·tec Gold coating system applied to this coated carbide grade (WPP10G) improves resistance to abrasive wear and thermal loading, supporting longer cutting times between indexings. The grade’s specification as a P‑class solution indicates suitability across a wide range of steels, offering flexibility for mixed production runs. The tolerance class M contributes to interchangeability and reliable seating in standard indexable insert cutters, helping to reduce setup variation and protect part tolerances. Integration into production and practical benefits Supplied in the WNMG form factor, size 08 and thickness 04, this insert fits standard toolholders designed for Trigon‑style inserts and is particularly suited where conservative, reliable performance is preferred over aggressive edge geometries. The design supports easy indexation and consistent edge positioning, which lowers setup complexity and shortens changeover time. For tailored recommendations on feed and speed for specific steels or machining strategies, Metav Werkzeuge’s consultants can provide application‑oriented guidance to optimise cycle times and surface finish. Contact Metav Werkzeuge today for tailored machining recommendations or to reserve WNMG080416-MP5 WPP10G inserts for upcoming turning operations — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: WNMG080416-MP5-WPP10G-WALTER Product: WNMG080416-MP5 WPP10G indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP10G Form: Trigon 80° Chipbreaker: MP5 Tolerance class: M Numbers / Core technical data Size: 08 Thickness: 04 Corner radius: 1.6 mm Relief angle: 0° (negative) Designs / Special features Coating: Tiger·tec Gold (coated carbide) Application group: ISO P (steel) Execution: G Chip control: MP5 chipbreaker Geometry: Trigon 80° for stable turning FAQ What materials is this insert suited for? This insert is intended for steel machining (ISO P); the WPP10G grade and Tiger·tec Gold coating are optimised for the temperatures and chip formation typical when turning unalloyed and alloyed steels. What benefits does the Tiger·tec Gold grade deliver? The Tiger·tec Gold grade on the WNMG080416-MP5 WPP10G insert improves wear resistance and thermal stability, resulting in longer tool life and more consistent surface quality in steel turning. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker shapes and directs chips to reduce entanglement and promote stable evacuation, which supports cleaner surfaces and safer operation in both continuous and interrupted turning. What advantages does the Trigon 80° geometry provide? An 80° Trigon geometry increases radial support for the insert, enhancing rigidity during cuts and enabling stable performance in medium to heavy turning operations. How is the designation WNMG080416-MP5 WPP10G interpreted? The code denotes a Trigon‑style insert (WNMG), size 08, thickness 04, corner radius 1.6 (the '16' part), with the MP5 chipbreaker and the WPP10G coated carbide grade optimised for ISO P (steel) applications. The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision cutting tools for metalworking and forms part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners and are used here for explanation only. There is no affiliation between our company and the trademark owners. The offered item is an original, factory‑new product from the manufacturer.
WNMG080416-MP5 WPP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, WPP20G grade and the MP5 chipbreaker to ensure consistent chip control, extended tool life and reliable machining results; order the insert directly via Metav Werkzeuge or request application advice from our consultants. WNMG080416-MP5 WPP20G – Trigon 80° indexable turning insert, Tiger·tec Gold (Walter Tools) A WNMG080416-MP5 WPP20G indexable turning insert engineered for robust Stahl turning and stable chip formation Tiger·tec Gold coating for longer tool life WPP20G grade optimised for Stahl MP5 chipbreaker for repeatable chip control Trigon 80° form for stable cutting Consistent tool life through advanced coating and grade The combination of the Tiger·tec Gold coating with the WPP20G coated carbide grade delivers measurable benefits for machining Stahl: improved wear resistance and sustained cutting-edge stability under thermal load. The coating reduces adhesive and abrasive wear while the substrate grade balances toughness and hardness for a broad range of steel applications. For operations that demand predictable tool change intervals and minimal rework, this configuration supports a steady manufacturing flow by lowering the risk of premature edge failure and by offering a longer productive life than uncoated or conventional grades. Geometry and chip control for predictable surface quality The Trigon 80° plate form, combined with a 0° negative rake and a 1.6 mm corner radius, provides a geometry that favours stable cutting forces and reliable edge strength. The MP5 chipbreaker is designed to produce short, manageable chips when turning common steel alloys, which reduces the likelihood of chip entanglement and improves machine uptime. As a result, the insert contributes to a consistent surface finish and dimensional stability, even under interrupted cuts or heavier depth-of-cut conditions. The geometry thus translates directly into fewer interruptions and a smoother production sequence. Process security and economical machining for workshops This indexable insert is tailored for efficient, repeatable machining of Stahl, covering both unalloyed and alloyed steels according to ISO group P. The grade and chipbreaker combination emphasise process security: less flank wear, controlled crater formation and predictable tool life. Economical machining follows from reduced tooling consumption and lower handling time per component. For production environments seeking steady output and simplified tool management, the insert supports higher productivity and easier process parameter standardisation while maintaining quality targets. For reliable, high-productivity Stahl turning with Tiger·tec Gold, contact Metav Werkzeuge for stock availability and application recommendations via info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: WNMG080416-MP5-WPP20G-WALTER Designation: WNMG080416-MP5 WPP20G Product type: Drehwendeschneidplatte (indexable turning insert) Manufacturer: Walter Tools Facts Plate size: 08 Plate thickness: 04 Nose/corner radius: 1.6 mm Relief/clearance angle: 0° negative Plate form: Trigon 80° Tolerance class: M Special features Series: Tiger-tec Gold Grade: WPP20G Chipbreaker: MP5 Material application: Stahl Execution: G FAQ Which materials is the insert suitable for? The WNMG080416-MP5 WPP20G insert is designed primarily for machining Stahl (ISO group P), covering unalloyed and alloyed steels. What benefits does the Tiger·tec Gold coating bring? Tiger·tec Gold on the WNMG080416-MP5 WPP20G improves wear resistance and thermal stability, extending tool life and supporting consistent performance in steel turning. How does the MP5 chipbreaker influence chip formation? The MP5 chipbreaker on this turning insert produces short, controlled chips for safer removal and less risk of chip build-up, which helps maintain continuous machining operations. For which cutting conditions is the 1.6 mm corner radius recommended? A 1.6 mm nose radius provides a balance between edge strength and surface finish; it is suitable for general turning operations where stability and robustness are priorities. Is the Trigon 80° form compatible with standard tool holders? Yes, the Trigon 80° geometry of the WNMG080416-MP5 WPP20G is compatible with the standard tool holders specified for WNMG-style inserts and supports stable cutting forces. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080416-MU5 WPP05G WPP05G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the MU5 chipbreaker for consistent wear resistance and reliable chip control in steel turning; order this insert through Metav Werkzeuge or contact our consultants for application advice. WNMG080416-MU5 WPP05G turning indexable insert — Trigon 80°, Tiger·tec Gold (Walter Tools) The WNMG080416-MU5 WPP05G is a robust turning indexable insert designed for machining steel, optimised for reliable chip control and long tool life in general turning operations. Tiger·tec Gold coating for extended wear life Trigon 80° geometry for stable roughing cuts 1.6 mm corner radius for predictable chip control MU5 chipbreaker tuned for steel machining Durable coating that extends cutting performance The Tiger·tec Gold coating on this indexable insert combines a wear-oriented microstructure with a tough substrate to deliver longer tool life under the variable thermal and mechanical loads typical of steel machining. The coated cemented carbide grade provides a balanced combination of wear resistance and fracture toughness, which reduces downtime for changing inserts and supports a more consistent production rhythm. The designation WPP05G identifies the cutting grade within Walter Tools’ Tiger·tec Gold family and indicates its primary suitability for the ISO P group, i.e. machining steel. Stable cutting geometry for process security The Trigon 80° shape and the MU5 chipbreaker provide a stable cutting edge and predictable chip formation, improving process security during both roughing and light finishing passes. The insert’s 1.6 mm corner radius helps to distribute cutting forces and supports a steady heat distribution across the edge, which in turn lowers the risk of premature edge chipping. The MU5 groove geometry is engineered to break and evacuate chips efficiently when cutting steels, resulting in fewer interruptions and a cleaner work area. Application fit: engineered for steel turning tasks Designed for use in the ISO P material class, the insert is suitable for a wide range of unalloyed and alloyed steels where the combination of abrasion resistance and toughness is required. The insert features a 0° (negative) relief angle that promotes a robust cutting edge and resistive behaviour under heavy radial loads, making it appropriate for conventional and semi-finish turning in workshop and production environments. Its trigon form factor allows compact tooling arrangements while maintaining a strong seat in standard insert holders. Request a tailored quotation or application recommendation for the Walter Tools WNMG080416-MU5 WPP05G from Metav Werkzeuge; contact our technical team at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for prompt support Technical Data Article number: WNMG080416-MU5-WPP05G-WALTER Description: WNMG080416-MU5 WPP05G turning indexable insert Brand: Walter Tools Series: Tiger·tec Gold Grade: WPP05G Facts Corner radius: 1.6 mm Shape angle: 80° Relief angle: 0° (negative) Plate size: 08 Plate thickness: 04 Tolerance class: M Special features MU5 chipbreaker Coating: Tiger·tec Gold (coated cemented carbide) Application group: P (steel) Suitable for unalloyed and alloyed steels Trigon 80° geometry FAQ What materials is this insert optimised for? The WNMG080416-MU5 WPP05G is optimised for the ISO P group, designed primarily for machining steel including unalloyed and alloyed variants. How does the MU5 chipbreaker affect machining? The MU5 chipbreaker on this insert promotes controlled chip formation and evacuation during steel turning, supporting uninterrupted cutting and improved surface consistency. What advantage does the Trigon 80° geometry provide? The Trigon 80° shape increases edge strength and stability in turning operations, enabling reliable performance in heavier cuts while keeping a compact tool setup. Is the insert suitable for finishing passes? Yes; while the insert excels in robust cutting, its balanced Tiger·tec Gold grade offers sufficient toughness and wear resistance to be used for light finishing in appropriate process windows. What does the 0° negative relief mean for tooling setup? A 0° negative relief provides a strong cutting edge and resilience against radial loads; toolholder seating and insert orientation should follow manufacturer recommendations for optimal results. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
WNMG080416-MU5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of a high-performance, coated carbide grade and a robust Trigon geometry to improve process stability in steel turning applications; rely on proven chip control and consistent edge life for fewer tool changes. Order through Metav Werkzeuge or request application advice from our consultants. WNMG080416-MU5 WPP10G Trigon 80° turning insert for steel (Tiger·tec Gold) by Walter Tools The WNMG080416-MU5 WPP10G is a trigon turning insert designed for machining steel with a Tiger·tec Gold coating, a MU5 chipbreaker and a negative 0° geometry for reliable cutting performance. Tiger·tec Gold coated carbide WPP10G Trigon 80° geometry for secure clamping 1.6 mm corner radius for robust edge life MU5 chipbreaker optimised for steel Increased throughput through wear-resistant grade and coating The combination of the Tiger·tec Gold coating and the WPP10G grade provides enhanced wear resistance suited to the thermal and mechanical demands of steel machining. Coated carbide reduces flank and crater wear compared with uncoated grades, which supports longer tool life and more consistent cycle times. For production environments seeking predictable performance, this results in fewer indexings and reduced downtime. The design targets efficient chip formation and heat management, which together help maintain surface quality and dimensional stability. Stable cutting and extended edge life from geometry and radius A Trigon 80° form with a 1.6 mm corner radius delivers mechanical strength at the cutting edge, improving resistance to chipping in interrupted cuts and heavy feeds. The negative 0° clearance geometry contributes to a secure seat in standard toolholders and enhances edge support under radial loads. These features make the insert particularly suitable where repeatable results and low tool consumption are priorities. For shops aiming to reduce scrap and rework, the robust geometry translates directly into fewer tool-related quality incidents. Consistent chip control and material focus for steel applications The MU5 chipbreaker is tailored for ISO P materials, meaning the insert is optimised for unalloyed and alloyed steels with a focus on reliable chip segmentation and evacuation. Proper chip control reduces the risk of surface damage and improves process safety around automated loading stations. The insert format and grade are compatible with common turning holders that accept the WNMG family, allowing straightforward integration into existing setups while maintaining the benefits of the Tiger·tec Gold technology. Practical machining considerations and integration tips For best results, clamp the insert securely in a compatible negative-geometry holder and use stable workholding to exploit the edge strength of the grade. Cooling strategy should follow established practice for steel turning—adequate flood or minimum quantity lubrication improves tool life and surface finish without compromising chip control. If tool life targets or cutting parameters need to be optimised for a specific batch or alloy, Metav Werkzeuge can provide application guidance and recommend suitable cutting data and holder pairings. For tailored machining advice on Walter Tools Tiger·tec Gold inserts and to confirm suitability for a specific steel grade, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: WNMG080416-MU5-WPP10G-WALTER Designation: WNMG080416-MU5 WPP10G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Shape: Trigon 80° Corner radius: 1.6 mm Thickness code: 04 Size code: 08 Clearance: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Grade: WPP10G Chipbreaker: MU5 Material application: Steel (ISO P) Geometry: Negative insert for secure clamping FAQ What materials is this insert designed for? This insert is optimised for ISO P materials; the Walter Tools WNMG080416-MU5 WPP10G is intended primarily for unalloyed and alloyed steels and is tuned for the heat and chip characteristics of steel machining. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WPP10G grade enhances wear resistance and thermal stability, leading to longer service life and more consistent cutting forces during steel turning operations. What benefit does the MU5 chipbreaker provide? The MU5 chipbreaker promotes controlled chip segmentation and evacuation in steel turning, reducing the chance of long, tangled chips and supporting a cleaner machining environment and improved surface integrity. Is the insert suitable for interrupted cuts and heavy feed rates? Yes; the Trigon 80° form combined with a 1.6 mm corner radius and negative geometry gives enhanced edge support, making the insert robust for interrupted cuts and higher radial engagement. Can this insert be used in standard WNMG toolholders? The insert follows the WNMG form factor and negative geometry, so it is compatible with standard holders designed for WNMG inserts; correct clamping torque and secure seating are recommended for best performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080416-MU5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a MU5 chipbreaker and a robust 80° trigon geometry to secure stable productivity when machining steel; order directly via Metav Werkzeuge or consult our specialists for machining recommendations. WNMG080416-MU5 WPP20G turning insert — Tiger·tec Gold grade for steel (Walter Tools) The WNMG080416-MU5 WPP20G is a negative 0° trigon turning insert engineered for productive steel machining in serial and precision turning applications. Tiger·tec Gold coating for extended tool life MU5 chipbreaker for reliable chip control Trigon 80° form with 1.6 mm corner radius Negative 0° rake for stable turning operations Longer tool life through advanced coating technology The insert is built on Tiger·tec Gold technology, a multi-layer coating concept that enhances wear resistance and reduces flank wear in demanding turning cycles. The WPP20G grade is a coated carbide composition tuned for steel applications, offering a balance between toughness and abrasion resistance; this leads to fewer tool changes and higher uptime. In practice, the coating helps to maintain a consistent cutting edge at elevated temperatures, so cycle times remain predictable and component quality is preserved. Geometry designed to maintain dimensional stability The Trigon 80° insert form and a 1.6 mm corner radius create a robust cutting edge that resists chipping during interrupted cuts and heavy engagement. The 0° (negative) rake produces a stable cutting action with reduced tendency for vibration when turning medium and heavy sections, which translates into consistent diameters and surface finishes. For operations where repeatability matters, this geometry supports reliable part tolerances and reduces scrap rates through mechanical stability rather than operator compensation. Efficient chip formation and wide steel applicability Equipped with the MU5 chipbreaker, the insert is optimised for controlled chip formation when machining steels classified under ISO P. The chipbreaker directs and fractures chips into manageable segments, reducing the risk of entanglement and improving process safety. Because the grade and geometry are matched to typical steel heat and chip behaviour, manufacturers benefit from smoother chip evacuation, less machine downtime and fewer interruptions for manual chip clearance—contributing to an overall more economical production process. For high-productivity turning with Walter Tools' Tiger·tec Gold technology, contact Metav Werkzeuge for tailored advice and availability by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data SKU: WNMG080416-MU5-WPP20G-WALTER Designation: WNMG080416-MU5 Grade: WPP20G Series: Tiger·tec Gold Manufacturer: Walter Tools Core specifications Insert size: 08 Plate thickness code: 04 Corner radius: 1.6 mm Rake angle: 0° (negative) Form angle: Trigon 80° Special features MU5 chipbreaker Coated carbide grade ISO P — suitable for steel Tolerance class: M Execution: G FAQ What steels is this insert suitable for? This insert is formulated for steels under the ISO P classification; the WPP20G grade is optimised for unalloyed and alloyed steels with a focus on reliable wear behaviour. How does the MU5 chipbreaker improve machining? The MU5 chipbreaker controls chip shape and breakage, reducing the likelihood of long, tangled chips and supporting safe, continuous turning cycles with better chip evacuation. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold multi-layer coating increases wear resistance and thermal stability, which results in longer cutting edge life and more consistent surface quality over extended production runs. Is the insert suitable for interrupted cuts or heavy engagement? The trigon 80° geometry with a 1.6 mm corner radius and negative rake offers enhanced mechanical strength, making the insert well suited to interrupted cuts and heavy engagement where edge robustness is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG080416-RP5 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold performance and the RP5 chipbreaker for consistent steel turning results; the Trigon 80° form with a 1.6 mm corner radius and 0° negative rake ensures stable cutting and predictable wear. Order the insert directly via Metav Werkzeuge or consult the technical team for application advice. WNMG080416-RP5 WPP05G — Turning insert, Trigon 80°, Tiger‑tec Gold — Walter Tools WNMG080416-RP5 WPP05G is a trigon turning insert designed for productive steel machining with Tiger‑tec Gold coating and RP5 chip control Tiger‑tec Gold coated carbide grade WPP05G RP5 chipbreaker for reliable chip formation Trigon 80° geometry for interrupted cuts 1.6 mm corner radius for robust edge life Exceptional performance for steel turning with predictable tool life The Tiger‑tec Gold coating combined with a coated carbide grade delivers high process security when machining a wide range of steel grades. The selected grade is engineered for the thermal and mechanical demands typical of steel turning, which results in improved wear resistance and longer usable life of the cutting edge. By using a coated indexable insert the machining process benefits from reduced tool changes and higher uptime, making the solution particularly suitable for batch production and mixed-series turning operations. Stable chip control and surface quality for reliable production The integrated RP5 chipbreaker is tailored to produce short, controlled chips across common cutting parameters for steel. This improves safety at the machine, reduces secondary operations for chip management and contributes to a consistent surface finish on the workpiece. Where surface integrity matters, the combination of chip control and a stable grade reduces the risk of built-up edge and enhances repeatability between components, supporting higher first-pass yield in serial production. Geometry designed for robustness in demanding conditions The trigon 80° insert form with a 1.6 mm corner radius and 0° negative rake provides a sturdy cutting edge that resists chipping during interrupted cuts and roughing passes. The geometry spreads cutting forces and contributes to dimensional stability in heavy cuts. As a result, fixture loads remain predictable and the machining process becomes less sensitive to minor workpiece irregularities, which benefits both tool life and part accuracy. Application guidance and practical benefits in the workshop This indexable insert is specified for machining steel in accordance with ISO material group P. The combination of grade and chipbreaker supports both roughing and medium finishing tasks, offering a balance between wear resistance and toughness. For process optimisation, pairing the insert with appropriate cutting parameters and a stable toolholder will maximise the advantages of the Tiger‑tec Gold technology and the RP5 chip geometry, reducing cycle times and improving overall productivity. For tailored application support or to secure availability of Walter Tools WNMG080416-RP5 WPP05G, contact Metav Werkzeuge for technical consultation and order processing via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: WNMG080416-RP5-WPP05G-WALTER Label: Drehwendeschneidplatte WNMG080416-RP5 WPP05G Walter Tools Product type: Turning insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Insert shape: Trigon 80° Corner radius: 1.6 mm Relief angle: 0° (negative) Size code: 08 Thickness code: 04 Grade/sort: WPP05G Tolerance class: M Special features Coated carbide (Tiger‑tec Gold) RP5 chipbreaker Suitability: steel (ISO group P) Execution: G FAQ What materials is this insert suitable for? The WNMG080416-RP5 WPP05G insert is specified for machining steel (ISO group P) and is engineered to handle the heat and chip characteristics typical of that material group. How does the Tiger‑tec Gold coating help in production? The Tiger‑tec Gold coating on the WNMG080416-RP5 WPP05G improves wear resistance and thermal stability, resulting in longer cutting-edge life and more consistent performance over extended cycles. What is the purpose of the RP5 chipbreaker? The RP5 chipbreaker on this turning insert controls chip shape and breakage, enhancing chip evacuation and reducing the need for manual chip management during continuous production runs. Is the insert geometry suitable for interrupted cuts? Yes, the Trigon 80° form with a 1.6 mm corner radius and 0° negative rake provides a robust edge that performs well during interrupted and heavy-cut conditions. Can this insert be used for finishing as well as roughing? The WPP05G grade offers a balance of toughness and wear resistance that makes the insert suitable for roughing and medium finishing operations when paired with appropriate cutting parameters. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanation; there is no connection between our company and the named brands. The offered item is an original, factory-new product from Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
WNMG080416-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from consistent turning performance thanks to the Tiger·tec Gold coating and the WPP10G grade, combined with precise chip control from the RP5 chipbreaker; these attributes support reliable machining of Stahl and steady tool life. Order the insert directly via Metav Werkzeuge or consult our technical team for application advice. WNMG080416-RP5 WPP10G – Indexable turning insert (Trigon 80°, Tiger·tec Gold) by Walter Tools The WNMG080416-RP5 WPP10G is an indexable turning insert engineered for robust general-purpose turning of Stahl, featuring a Trigon 80° geometry and a Tiger·tec Gold coated carbide grade for high process stability. Tiger·tec Gold coating WPP10G Trigon 80° geometry for robust turning RP5 chipbreaker for controlled chips 0° negative rake, 1.6 mm corner radius Productivity gains from advanced coating and grade The Tiger·tec Gold coating together with the WPP10G grade ensures wear-resistant performance and consistent edge life during continuous turning operations on Stahl. Coated carbide reduces flank wear and improves thermal resistance, which translates into longer tool life and fewer tool changes. For production environments this means less downtime and more consistent part quality; the combination of coating and substrate is optimised for typical heat and chip conditions that occur when machining steels. Reliable chip control and dimensional stability The RP5 chipbreaker and Trigon 80° geometry provide controlled chip formation and robust cutting behaviour, particularly beneficial in interrupted cuts and variable depth operations. The 0° negative rake increases edge strength and helps maintain geometric stability under higher cutting forces, while the 1.6 mm corner radius gives improved edge robustness for moderate finishing and roughing. This setup reduces the risk of built-up edge and supports repeatable tolerance achievement in batch production. Clear application focus for workshop and series production Designed for the ISO P group, the insert is particularly suited to general turning of Stahl as defined in ISO 513; the tolerance class M indicates consistent manufacturing accuracy for reliable indexing and seating in holders. The grade balance (wear resistance vs. toughness) supports a broad range of cutting parameters, enabling shops to standardise on one grade for many common steel applications and simplify inventory management. Compatibility and handling for efficient tool use The insert’s Trigon 80° form and standard WNMG designation make it compatible with a wide range of standard turning toolholders, facilitating quick integration into existing tool systems. With the RP5 chip control and Tiger·tec Gold coating, the component supports both single-operation setups and larger production runs while maintaining consistent surface finish and process security. The SKU provides traceability for procurement and tool-room records. For tailored recommendations and to procure Walter Tools inserts such as the WNMG080416-RP5 WPP10G, contact Metav Werkzeuge for rapid technical consultation and specification support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: WNMG080416-RP5-WPP10G-WALTER Designation: WNMG080416-RP5 ISO designation: WNMG080416-RP5 WPP10G Grade: WPP10G Series: Tiger·tec Gold Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Facts Corner radius: 1.6 mm Rake angle: 0° (negative) Insert size: 08 Thickness: 04 Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: RP5 Geometry: Trigon 80° Suitable for: Stahl (ISO 513 P group) Application: turning FAQ Is this insert suitable for a wide range of steels? The insert’s WPP10G grade and Tiger·tec Gold coating are formulated for general turning of Stahl (ISO P group), offering a balance of wear resistance and toughness for many steel applications. Which chip behaviour can be expected with the RP5 chipbreaker? The RP5 chipbreaker on this Trigon insert produces short, controllable chips in typical turning operations, supporting safe chip evacuation and stable process behaviour. Does the insert require specific toolholders due to its Trigon 80° form? Trigon 80° inserts use standard WNMG-compatible toolholders; the insert fits common turning systems designed for this geometry and tolerance class M. How does the 0° negative rake affect cutting performance? The 0° negative rake increases edge strength and improves resistance to shock and vibration, which benefits interrupted cuts and applications where edge durability is prioritised. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com The Walter AG (brand: Walter Tools) is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners and are used here for explanatory purposes only. The offered article is an original, factory-new product of the manufacturer.
WNMG080416-RP5 WPP20G RP5 Wendeplatten - Walter Tools
Reliable turning performance arises from the combination of a Tiger‑tec Gold coating and the Trigon 80° geometry, delivering extended tool life and stable cutting in steel applications. The RP5 chipbreaker together with a 1.6 mm corner radius ensures predictable chip formation and high edge strength for repeatable results. Order the WNMG080416-RP5 WPP20G insert directly via Metav Werkzeuge or ask our consultants if needed. WNMG080416-RP5 WPP20G — Indexable turning insert for steel machining (Walter Tools) The WNMG080416-RP5 WPP20G is an indexable turning insert designed for general steel turning, offering a balanced mix of wear resistance and toughness under the Tiger‑tec Gold coating. Tiger‑tec Gold coating for long tool life Trigon 80° geometry for stable cutting 1.6 mm corner radius for robustness Optimised RP5 chipbreaker for steel Consistent performance for demanding steel turning The insert’s WPP20G grade, part of the Tiger‑tec Gold series, is engineered specifically for steel (ISO group P) applications and combines a coated carbide substrate with a surface system tuned for the thermal and mechanical conditions of steel cutting. That combination increases wear resistance while preserving enough toughness to avoid premature chipping during interrupted cuts. For production environments the result is a stable tool life and predictable regrinding intervals, which supports throughput planning and reduces the frequency of tool changes. Geometry that enhances edge strength and process security The Trigon 80° form with a 1.6 mm corner radius and a negative rake of 0° provides a robust cutting edge that resists overload and vibration in shoulder and medium-depth turning. The trigon shape increases the active cutting edge per insert and improves clamping stability in many standard toolholders. This geometry translates into fewer rejects and a steadier surface finish when machining medium to high-strength steels, and it reduces the risk of edge failure in intermittent or finish-turning operations. Predictable chips and improved metal removal Equipped with the RP5 chipbreaker, the insert produces short, controllable chips when cutting steels under typical feeds and speeds. Predictable chip formation reduces machine downtime related to chip handling and minimises the need for manual chip control measures. The chipbreaker design also allows for consistent cutting parameters across batches, which simplifies process setup and increases confidence in cycle time forecasts for serial production runs. Applications and selection guidance for workshop use This indexable turning insert is suitable for a wide range of turning tasks in steel, from general roughing to light finishing where a reliable edge is required. The WNMG080416-RP5 WPP20G grade is positioned as a universal solution for shops seeking a single grade that covers a broad spectrum of steel types while still offering good tool life. When matching to holders and machines, choose a clamping system compatible with trigon inserts and consider feed and depth settings that align with the RP5 chip control to maintain the balance between productivity and surface quality. For detailed compatibility checks and cutting data, technical consultants are available to advise on optimisation. Contact Metav Werkzeuge for tailored toolholder pairing and cutting-parameter support; technical enquiries via info@metav-werkzeuge.com or by phone at +49 2822 7131930, and ask for assistance with the Walter Tools turning programme Technical Data SKU: WNMG080416-RP5-WPP20G-WALTER Designation: WNMG080416-RP5 Full designation: WNMG080416-RP5 WPP20G Series: Tiger‑tec Gold Grade: WPP20G Manufacturer: Walter Tools Core specifications Corner radius: 1.6 mm Rake angle: 0° (negative) Insert shape: Trigon 80° Insert size: 08 Thickness: 04 Tolerance class: M Materials and features Suitable for: Steel (ISO group P) Chipbreaker: RP5 Coated carbide grade: Tiger‑tec Gold Execution: G Product type: Indexable turning insert FAQ What materials is this insert intended for? The WNMG080416-RP5 WPP20G is optimised for steel (ISO group P) and its coating and chipbreaker are tuned to the thermal and chip-formation demands of steel machining. How does the RP5 chipbreaker affect cutting parameters? The RP5 chipbreaker is designed to produce short, controllable chips at typical turning feeds for steel, which allows for stable cutting parameters and easier chip evacuation in continuous operations. Is the trigon shape better suited to roughing or finishing? The Trigon 80° form with a 1.6 mm corner radius provides enhanced edge strength and is therefore well suited to roughing and medium-depth finishing where robustness and process security are priorities. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer, Walter Tools.
WNMG080416-RP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the wear-resistant WPP30G grade together with a compact 1.6 mm corner radius for consistent edge life and productive steel turning. Order the WNMG080416-RP5 WPP30G insert directly via Metav Werkzeuge or consult our specialists for cutting-data and toolholder recommendations. WNMG080416-RP5 WPP30G — Turning insert (Trigon 80°, Tiger‑tec Gold) by Walter Tools WNMG080416-RP5 WPP30G is a trigon 80° turning insert designed for productive steel machining, combining a robust chipbreaker and a coated‑carbide grade for long, predictable tool life Tiger‑tec Gold coating for extended tool life For steel machining (ISO group P) Trigon 80° insert, 1.6 mm corner radius RP5 chipbreaker for stable chip control High productivity and predictable performance for steel turning The combination of the Tiger‑tec Gold coating and the WPP30G grade delivers a balanced performance profile for a wide range of steel applications. The coated carbide substrate is optimised for the typical heat and chip formation of steel machining, which means higher cutting speeds and more consistent tool life. For production shops seeking reliable cycle times, this insert supports steady material removal rates while reducing unplanned tool changes. The engineering behind the grade focuses on wear resistance and toughness, so tooling costs per component are minimised through extended edge life. Precise geometry and chip control that improve surface quality The Trigon 80° form, coupled with the RP5 chipbreaker, supports stable chip formation across finishing and medium‑depth roughing cuts. The 1.6 mm corner radius contributes to improved edge strength and a consistent surface finish on turned parts, while the 0° (negative) free angle suits robust clamping and heavy engagement. These geometry choices reduce vibration and promote heat distribution away from the cutting edge, resulting in fewer edge failures and more predictable dimensional stability part‑to‑part. Practical advantages for workshop integration and process planning Designed with industrial production in mind, the insert is supplied in a standard tolerance class M, ensuring interchangeability between compatible toolholders and enabling straightforward stock management. The RP5 chipbreaker reduces the need for specialised coolant strategies in many steel applications, and the insert size and thickness codes align with common turning systems for quick replacement. For process planning, the reliable behaviour of the coated grade facilitates the creation of conservative, repeatable cutting parameters, which shortens setup time and improves overall throughput. Contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations on Walter Tools Tiger‑tec Gold inserts, or request the cutting‑data sheet for the WNMG080416-RP5 WPP30G Technical data SKU: WNMG080416-RP5-WPP30G-WALTER Designation: WNMG080416-RP5 WPP30G Product type: Turning insert (Drehwendeschneidplatte) Series: Tiger‑tec Gold Grade: WPP30G Numerical data Corner radius: 1.6 mm Insert form: Trigon 80° Free angle: 0° (negative) Tolerance class: M Insert size code: 08 Thickness code: 04 Special features Chipbreaker: RP5 Coated carbide (coating technology: Tiger‑tec Gold) Application group: P (steel) Wear‑resistant and balanced toughness for steel machining FAQ What materials is this insert suitable for? The WNMG080416-RP5 WPP30G is specified for ISO group P (steel); the WPP30G grade and Tiger‑tec Gold coating are tuned to the heat and chip formation typical of unalloyed and alloyed steels. Which chipbreaker should be used for general turning tasks? This insert uses the RP5 chipbreaker, which offers stable chip control across a range of machining depths and contributes to a consistent surface finish when turning steel. How does the Trigon 80° shape affect machining? The Trigon 80° geometry provides a strong cutting edge and good approach angles for external turning; in combination with the 1.6 mm corner radius it balances edge strength and surface quality. Is the insert suitable for heavy roughing? The negative 0° free angle and the robust WPP30G grade support heavier engagement than fine finishing inserts; however, machining parameters should be chosen according to the workpiece and holder rigidity. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Walter Tools and related product names are cited for explanation only; there is no affiliation implied with Metav Werkzeuge. The offered item is original factory‑new merchandise from the manufacturer.
WNMG100608-MK5 WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, precise geometry, and reliable chip control to maintain stable production when machining cast iron; order directly via Metav Werkzeuge or consult the specialists for application advice. WNMG100608-MK5 WKK10S — Trigon 80° indexable insert for cast iron (Walter Tools) A WNMG100608-MK5 WKK10S indexable turning insert engineered for efficient, repeatable machining of cast iron in a Trigon 80° form. Tiger·tec Silver coating for wear resistance Grade WKK10S, optimised for cast iron Trigon 80° form with 0.8 mm corner radius MK5 chipbreaker for controlled short chips High-performance turning for abrasive cast iron work The combination of Tiger·tec Silver technology and the WKK10S grade provides a robust solution for abrasive cast iron. The insert’s coated-carbide construction ensures sustained wear resistance, which reduces the need for frequent index changes and helps keep machining cycles predictable. For operations where broken, short chips dominate, this grade is tuned to resist flank wear and abrasion, offering measurable improvements in process stability and tool life compared with uncoated alternatives. Geometry that secures surface quality and dimensional consistency The Trigon 80° form and 0.8 mm corner radius deliver a balance between edge strength and cutting detail. The 0° clearance (negative rake) increases edge stability during interrupted cuts and heavy engagement, while the MK5 chipbreaker promotes stable chip control, reducing the risk of built-up edge and mating-surface damage. Together, these features translate into consistent surface finish and repeatable part tolerances in series production settings. Cost-effective process reliability and straightforward tool integration Designed for productive turning of cast iron, the insert supports high process reliability through predictable wear patterns and effective chip formation. The compatibility with standard WNMG toolholders means minimal adjustments to existing tooling setups. By reducing unscheduled tool changes and improving cycle uptime, this solution contributes to a favourable cost-per-part metric while keeping setup complexity low for shopfloor teams. For applications requiring dependable cast iron performance from Walter Tools’ Tiger·tec Silver grade, contact Metav Werkzeuge for tailored recommendations and fast supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: WNMG100608-MK5-WKK10S-WALTER Label: Drehwendeschneidplatte WNMG100608-MK5 WKK10S Walter Tools Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKK10S Facts Corner radius: 0.8 mm Clearance angle: 0° (negative) Plate form: Trigon 80° Plate size: 10 Thickness designation: 06 Tolerance class: M Special features Coating: Tiger·tec Silver Material group: K (cast iron) Chipbreaker: MK5 Designation: WNMG100608-MK5 ISO designation: WNMG100608-MK5 WKK10S Application focus: cast iron machining FAQ What materials is this insert best suited for? The WNMG100608-MK5 WKK10S insert is optimised for cast iron applications (ISO group K) and performs well where short, brittle chips are produced. How does the MK5 chipbreaker affect production? The MK5 chipbreaker promotes short, controlled chips, improving swarf evacuation and reducing interruptions caused by long, entangling chips when using the WNMG100608-MK5 WKK10S insert. Is the negative 0° clearance suitable for interrupted cuts? Yes. The 0° clearance increases edge stability during interrupted or heavy cuts, making the insert a robust choice for challenging cast iron turning tasks. Can this insert be used in standard WNMG toolholders? The WNMG100608-MK5 WKK10S follows standard WNMG geometry and fits common toolholders designed for WNMG inserts, allowing straightforward replacement and integration. What advantage does Tiger·tec Silver offer? The Tiger·tec Silver coating enhances wear resistance and thermal stability, extending effective tool life when machining abrasive cast iron materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com