WNMG100608-MM5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP20G cutting grade and a robust Trigon 80° geometry to increase process stability when turning stainless steels; order directly via Metav Werkzeuge or contact our consultants for tailored advice. WNMG100608-MM5 WMP20G indexable turning insert — Trigon 80°, 0.8 mm radius — Walter Tools WNMG100608-MM5 WMP20G is an indexable turning insert designed for reliable machining of stainless steel components in medium to robust conditions Tiger·tec Gold coating for durability Optimised chip control MM5 Trigon 80° shape for stable cutting Suitable for stainless steel (ISO M) Durable coating and grade for consistent cuts The combination of the Tiger·tec Gold series and the WMP20G grade provides a coated-carbide chemistry optimised for machining stainless steel. This pairing enhances resistance to flank wear and supports stable chip formation, which reduces the frequency of tool changes and contributes to predictable cycle times. In production environments where repeatability matters, the coating and grade work together to maintain a consistent cutting edge under elevated temperatures typical for austenitic stainless materials. Geometry engineered for strength and surface quality A Trigon 80° insert form with a 0° (negative) clearance and a 0.8 mm corner radius gives the insert mechanical robustness and edge support. The trigon shape increases effective cutting edge engagement, improving tool life on interrupted cuts and heavy cross-sections. The larger corner radius helps to deliver improved surface finish and avoids premature edge breakdown when machining tough, work-hardening stainless alloys. Chip control and process security with MM5 breaker The integrated MM5 chipbreaker is tuned to the material group ISO M and promotes short, manageable chips during turning of stainless steels. Reliable chip control reduces the risk of re-cutting and workpiece damage, which in turn supports safer automatic machining and less downtime. For shops aiming to increase throughput, the chip management contributes directly to higher process security and fewer secondary operations. Practical application and benefits for production This insert suits turning operations where mechanical strength and edge stability are priorities—such as roughing and semi-finishing of stainless-steel parts. The coated carbide construction and the chosen breaker geometry make it a pragmatic choice for mixed-series production, balancing cutting performance with predictable tool life. For precise parameter setting or integration into existing toolholders, Metav Werkzeuge’s technical team can advise on optimal speeds and feeds based on the component alloy and machine capabilities. Contact Metav Werkzeuge for a technical consultation or to request availability of Walter Tools Tiger·tec Gold inserts such as WNMG100608-MM5 WMP20G — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and delivery options Technical data Article number: WNMG100608-MM5-WMP20G-WALTER Label: Drehwendeschneidplatte WNMG100608-MM5 WMP20G Walter Tools Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts Inscribed circle / size: 10 mm Thickness designation: 06 Corner radius: 0.8 mm Shape: Trigon 80° Clearance angle: 0° (negative) Special features Grade: WMP20G (Tiger·tec Gold) Chipbreaker: MM5 Coating / substrate: coated carbide Material suitability: stainless steel (ISO M) FAQ What materials is this insert intended for? The WNMG100608-MM5 WMP20G insert is specified for stainless steel machining (ISO M), with the Tiger·tec Gold grade supporting secure chip formation and edge life. How does the MM5 chipbreaker affect performance? The MM5 chipbreaker produces short, controllable chips in stainless-steel turning, improving process security and reducing the risk of chip-related surface damage. What advantages does the Trigon 80° form deliver? The Trigon 80° geometry increases cutting-edge robustness and is beneficial on interrupted cuts and heavier cross-sections, enhancing tool life and surface quality. Is this insert suitable for heavy-duty roughing? Yes — the combination of a 0.8 mm corner radius, negative rake and the coated WMP20G grade provides mechanical strength suited to demanding roughing and semi-finishing tasks on stainless steels. Walter AG (brand: Walter Tools); Headquarters: Tübingen, Germany. The Walter AG (brand: Walter Tools) is part of the global tooling community. Protected trademarks and trade names remain the property of their respective owners. Brand names are used for explanation only; no affiliation between Metav Werkzeuge and the mentioned manufacturers is implied.
WNMG100608-MM5 WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, a robust WSM20S grade and a Trigon 80° geometry for reliable machining of difficult-to-cut alloys and rostfreier Stahl; order directly via Metav Werkzeuge or consult the team for application support. WNMG100608-MM5 WSM20S indexable turning insert — Trigon 80°, Tiger‑tec Silver (Walter Tools) The WNMG100608-MM5 WSM20S is an indexable turning insert optimised for demanding turning operations on rostfreier Stahl and heat-resistant superalloys, delivering stable chip control and extended tool life Tiger‑tec Silver coating technology Grade WSM20S for high thermal loads Trigon 80° insert geometry MM5 chipbreaker for consistent chips High thermal resistance for reliable machining The Tiger‑tec Silver coating combined with the WSM20S grade provides enhanced heat resistance and wear protection, so cutting performance remains consistent under thermal load. This formulation supports secure chip formation when machining rostfreier Stahl (ISO M) and heat-resistant alloys (ISO S), reducing the risk of built-up edge and unplanned downtime. The result is a measurable improvement in process stability and fewer interruptions in production, which translates into better overall throughput for serial turning tasks. Geometry engineered for cutting stability and surface quality The Trigon 80° shape and the negative 0° relief angle deliver robust cutting engagement and predictable cutting forces, while the 0.8 mm corner radius helps distribute load across the cutting edge to avoid premature edge failure. The MM5 chipbreaker is tuned to produce controlled chips in a broad range of feeds, enhancing both surface finish and operator safety. These geometric choices support repeatable tolerances and reduce the need for secondary finishing on turned components. Productivity gains through reduced tool consumption The coated carbide formulation and optimised chip control combine to lower flank wear rates and extend usable life of the insert, improving cost-efficiency per part. In production environments where consistency and uptime matter, this insert offers a balance of process reliability and economical performance. The stable cutting edge reduces tool changes and inventory variety, supporting leaner tool management and predictable machining cycles in batch and continuous operations. Seamless integration into existing toolholders and workflows Identified as WNMG100608-MM5 with a standard WNMG seat form, the insert installs into widely used turning holders and is suitable for immediate integration into current toolsets. The tolerance class M and execution G indicate manufacturing precision and robust production-grade quality. For workshops seeking an insert for rostfreier Stahl and difficult-to-machine materials that combines dependable repeatability with straightforward handling, this item offers a practical solution ready for series production. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger‑tec Silver inserts and to arrange supply or technical consultation Technical data SKU: WNMG100608-MM5-WSM20S-WALTER Designation: WNMG100608-MM5 Full designation: WNMG100608-MM5 WSM20S Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Insert size: 10 Thickness: 06 Corner radius: 0.8 mm Relief angle: 0° (negative) Shape: Trigon 80° Special features Coating technology: Tiger‑tec Silver Grade: WSM20S Chipbreaker: MM5 Material suitability: S / M Tolerance class: M Execution: G FAQ What materials is this insert designed to machine? The WNMG100608-MM5 WSM20S insert is designed for rostfreier Stahl (ISO M) and heat-resistant superalloys (ISO S), offering secure chip formation and thermal resilience. How does the MM5 chipbreaker affect machining? The MM5 chipbreaker generates consistent, controllable chips across common feed ranges, improving surface finish and reducing the likelihood of chip-related interruptions when using the Walter Tools insert. Is the Trigon 80° geometry suitable for general turning tasks? Yes, the Trigon 80° form provides robust cutting engagement and stability for a wide range of turning operations while supporting good edge strength and repeatable dimensional control. What are the key advantages of the Tiger‑tec Silver coating? Tiger‑tec Silver enhances thermal resistance and wear protection, helping the WSM20S grade maintain a stable cutting edge during longer cycles on difficult-to-machine materials. How is the insert identified for ordering and tool preparation? Order using the SKU WNMG100608-MM5-WSM20S-WALTER; the insert fits standard WNMG toolholders and is delivered in execution G with tolerance class M for dependable seating. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG100608-MM5 WSM30S MM5 Wendeplatten - Walter Tools
Take advantage of the combination of high thermal stability, secure chip control and a robust trigon geometry for consistent performance in demanding turning tasks. Order the insert via Metav Werkzeuge or ask the consultants for application-specific recommendations. WNMG100608-MM5 WSM30S turning insert — Trigon 80°, Tiger·tec Silver by Walter Tools WNMG100608-MM5 WSM30S is a negative-rake trigon insert designed for heavy-duty turning in stainless steels and high-temperature alloys *Tiger·tec Silver coated carbide insert *Optimised for stainless steels and superalloys *Trigon 80° form with 0° negative rake *Stable chip control via MM5 breaker Greater productivity through heat-resistant coating and grade selection The combination of the Tiger·tec Silver coating and the WSM30S grade delivers improved thermal resistance and edge stability during interrupted cuts and high-temperature contact. This engineered coating reduces flank wear and supports a consistent cutting edge life, which translates into fewer indexings and longer tool cycles. For production environments machining stainless steels and heat-resistant alloys, the result is a measurable reduction in tool-related downtime while maintaining surface quality. Reliable chip control for predictable finishing and safety The MM5 chipbreaker geometry is tailored to produce short, controllable chips when turning ductile, work-hardened materials. The Trigon 80° form combined with a corner radius 0.8 ensures a strong cutting edge that resists chipping and supports steady forces along the toolholder. Predictable chip formation reduces rework and improves operator safety, while the robust geometry helps maintain dimensional stability in extended runs. Geometry and edge design that support consistent accuracy A 0° negative rake and trigon insert shape provide rigidity at the cutting zone, which is particularly beneficial when facing axial or radial load variations. The solid carbide substrate and coated surface reduce the risk of built-up edge on sticky alloys, helping to preserve the machined tolerance and surface integrity. These attributes contribute to repeatable part quality and fewer in-process adjustments on the machine. Application-focused benefits for workshop efficiency Specifically formulated for the machining of stainless steels (ISO group M) and high-temperature superalloys and titanium (ISO group S), this insert offers a balance of wear resistance and edge robustness. The design supports higher cutting parameters where machines and holders allow, improving throughput without sacrificing tool life. For job shops and series production alike, the insert provides a dependable option where material mix and complexity demand a resilient cutting solution. For tailored cutting data or to discuss suitability in a specific turning application, contact Metav Werkzeuge for expert advice or procurement of this Walter Tools insert. Technical Data Article number: WNMG100608-MM5-WSM30S-WALTER Label: Drehwendeschneidplatte WNMG100608-MM5 WSM30S Walter Tools Manufacturer: Walter Tools Facts Corner radius: 0.8 Insert form: Trigon 80° Inscribed circle / size: 10 Thickness: 06 Clearance angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Silver Grade: WSM30S Chipbreaker: MM5 Material application: Stainless steels (M), Heat-resistant superalloys and titanium (S) Manufacturer brand: Walter Tools FAQ What materials is this insert best suited for? The WNMG100608-MM5 WSM30S insert is designed primarily for stainless steels (ISO group M) and for heat-resistant superalloys and titanium (ISO group S), offering thermal stability and edge strength for these demanding materials. How does the Tiger·tec Silver coating affect performance? The Tiger·tec Silver coating increases thermal resistance and reduces flank wear, enabling higher cutting parameters and longer tool life with the WSM30S grade in tough machining conditions. What benefits does the MM5 chipbreaker provide? The MM5 chipbreaker promotes short, controlled chips and consistent chip evacuation, improving surface finish and reducing the risk of workpiece damage or tool edge failure. Is the trigon form suitable for heavy cuts? Yes, the Trigon 80° geometry with a 0° negative rake provides a robust cutting edge and rigidity that supports higher cutting forces and enhances dimensional stability in heavier turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected brand names and trademarks are the property of their respective owners. The mention of brand names and trademarks is for explanatory purposes only and does not imply any affiliation between our company and the manufacturers. The offered item is original, factory-new merchandise of the stated manufacturer.
WNMG100608-MP5 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the robust Trigon 80° geometry for stable chip control and extended tool life; the MP5 chipbreaker ensures predictable chips when machining steel. Order the WNMG100608‑MP5 WPP10G insert directly via Metav Werkzeuge or ask our consultants if needed. WNMG100608-MP5 WPP10G – Turning insert WNMG100608‑MP5 WPP10G for steel (Tiger·tec Gold) by Walter Tools WNMG100608‑MP5 WPP10G is a precision turning insert designed for reliable performance in the machining of steel, combining a coated cemented‑carbide grade with a Trigon 80° form for secure seating and consistent results. Tiger·tec Gold coating for enhanced lifespan Trigon 80° form for secure clamping MP5 chipbreaker for controlled chips 0° negative rake for stable cutting in steel Maximise productivity with proven coating technology The Tiger·tec Gold coating provides a high level of wear resistance while maintaining edge strength, which translates to longer tool life and fewer insert changes during production. Designed as a coated cemented carbide grade suitable for ISO P (steel) applications, the insert reduces downtime and supports consistent component quality in medium‑to‑high volume turning. By favouring a coating that balances hardness and toughness, the tool helps to lower costs per part without compromising surface integrity. Predictable chip control for safer machining The MP5 chipbreaker delivers well‑formed, controllable chips in typical steel turning operations, reducing the risk of entangling or long, stringy chips that impede automated processes. A dedicated chip geometry channels material away from the cutting zone and reduces heat accumulation at the cutting edge, which improves surface finish and extends edge life. Explaining briefly: a chipbreaker is an engineered groove on the rake face that alters chip flow to produce short, manageable segments rather than continuous swarf. Geometry and edge design for reliability and surface quality The Trigon 80° plate form combined with the 0.8 mm corner radius provides a robust cutting edge able to withstand interrupted cuts and moderate depths of cut while still delivering acceptable surface finishes. The 0° negative rake increases insert strength and prevents premature edge chipping when cutting tougher steel grades, making the design especially useful for stable, repeatable setups. With a tolerance class M, the insert meets common precision standards for secure seating and repeatable indexability in standard toolholders. Practical application notes and process guidance This indexable insert is intended primarily for turning steel components where a balance of durability and surface quality is required. The combination of the Trigon form and MP5 chip control is suited for medium finishing and general‑purpose turning in production environments. For selection: match the insert size and thickness to the chosen toolholder and application; consider carbide grade WPP10G for general steel machining to exploit the broad material coverage and stable chip formation described in the technical specification. For tailored advice on integrating Tiger·tec Gold inserts into an existing turning process, contact Metav Werkzeuge to discuss WNMG100608‑MP5 WPP10G availability and application recommendations. Technical Data Article number: WNMG100608-MP5-WPP10G-WALTER Designation: WNMG100608‑MP5 WPP10G Manufacturer: Walter Tools Facts Insert form: Trigon 80° Corner radius: 0.8 mm Rake angle: 0° (negative) Insert size: 10 Thickness: 06 Tolerance class: M Chipbreaker: MP5 Special features Series: Tiger·tec Gold Grade: WPP10G Material group: Steel (ISO P) Execution: G Product type: Drehwendeschneidplatte (turning insert) FAQ What materials is this insert suitable for? The WNMG100608‑MP5 WPP10G insert from Walter Tools is specified for ISO P materials, i.e. steel, and is engineered to handle the heat and chip characteristics typical of these alloys. How does the MP5 chipbreaker improve machining? The MP5 chipbreaker on the WNMG100608‑MP5 controls chip shape and flow, producing short, manageable chips that reduce downtime and improve safety in automated turning operations. Why choose the Tiger·tec Gold grade for steel turning? The Tiger·tec Gold coating on this Walter Tools grade offers a balance of wear resistance and edge strength, extending insert life and maintaining surface quality during continuous production. What advantages does the Trigon 80° form provide? Trigon 80° geometry offers secure clamping and good accessibility in typical turning setups, enabling stable cutting conditions and repeatable indexing for the WNMG100608‑MP5 insert. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, brand‑new goods from the manufacturer.
WNMG100608-MP5 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance, a controlled MP5 chipbreaker and the robust Trigon 80° geometry for reliable, productive steel turning; order directly via Metav Werkzeuge or consult our specialists for cutting data and tooling advice. WNMG100608‑MP5 WPP20G indexable turning insert — Tiger‑tec Gold, Trigon 80°, for steel (Walter Tools) The WNMG100608‑MP5 WPP20G is a negative‑rake, Trigon 80° indexable insert designed for heavy‑duty and finish turning of steel under industrial conditions Tiger‑tec Gold coated for long tool life Trigon 80° geometry for robust turning MP5 chipbreaker for controlled chip formation Optimised for steel machining (ISO P) Boosted productivity through superior wear resistance The combination of the WPP20G coated carbide grade and the Tiger‑tec Gold technology delivers noticeably longer tool life and predictable performance. The coating is engineered to reduce flank and crater wear during continuous turning operations, which translates into fewer insert changes and lower process costs. By choosing a wear‑resistant grade, operators achieve stable machining windows and extended tool cycles, leading to higher throughput and less production downtime. This makes the insert especially suitable for batch production and medium‑ to high‑volume turning lines. Stable chip control and consistent surface finish The MP5 chipbreaker has been developed to generate short, controllable chips when machining steel, reducing the risk of entangling chips and enabling stable cutting at higher feeds. Together with the Trigon 80° form and the 0° negative rake, the geometry promotes a secure cutting edge and good surface integrity on workpieces. For engineers unfamiliar with chipbreakers: the breaker shapes the chip at the cutting edge to split and evacuate it reliably, improving safety and reducing rework. The result is a consistent finish and fewer secondary operations. Broad applicability for steel workpieces (ISO P) This insert is optimised for the ISO P material group, covering a wide range of unalloyed and alloyed steels encountered in general engineering. The grade balance (wear‑resistant yet sufficiently tough) allows it to cope with typical heat generation and chip formation associated with steel turning. When a stable, universal grade is required across different steel batches, the WPP20G option reduces the need for frequent grade swaps while maintaining productivity and component quality. Simple integration and predictable mounting The WNMG form is widely used and fits standard WNMG toolholders, enabling straightforward replacement and quick setup. The 0.8 mm corner radius offers a compromise between edge strength and achievable surface finish, suitable for a range of turning tasks from roughing to light finishing. The plate thickness and geometry ensure a secure clamp and repeatable positioning, which supports process stability and reduces setup variability across shifts. For production planners, this means fewer interruptions and more reproducible parts per shift. Contact Metav Werkzeuge to discuss the WNMG100608‑MP5 WPP20G for steel turning and request tailored cutting parameters from our advisors Technical data Article number: WNMG100608‑MP5‑WPP20G‑WALTER Label: Drehwendeschneidplatte WNMG100608‑MP5 WPP20G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte (indexable turning insert) Series: Tiger‑tec Gold ISO designation: WNMG100608‑MP5 WPP20G Facts Inscribed circle / size: 10 Thickness: 06 Corner radius: 0.8 mm Rake angle: 0° (negative) Tolerance class: M Special features Coating / grade: WPP20G (Tiger‑tec Gold coated carbide) Chipbreaker: MP5 Geometry: Trigon 80° Execution: G Material application: Steel (ISO P) FAQ Which materials is this insert suitable for? The WNMG100608‑MP5 WPP20G from Walter Tools is optimised for the ISO P group, primarily designed for unalloyed and alloyed steel machining. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker on the WNMG100608‑MP5 WPP20G shapes and fractures chips to ensure controlled evacuation, improving process safety and surface quality during steel turning. What benefits does the Tiger‑tec Gold coating provide? Tiger‑tec Gold on the WPP20G grade enhances wear resistance and thermal stability, extending insert life and delivering consistent performance under continuous cutting. Is the Trigon 80° form suitable for roughing and finishing? Yes, the Trigon 80° geometry of this insert provides edge strength for roughing while allowing acceptable surface finishes for light finishing when paired with appropriate feeds and speeds. Can this insert be used in standard WNMG toolholders? The WNMG100608‑MP5 WPP20G matches the common WNMG indexable insert family and is compatible with standard WNMG toolholders for straightforward replacement. Protected trademarks and product names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
WNMG100608-RP7 WPP20G WPP20G Wendeplatten - Walter Tools
Combining high wear resistance, consistent chip control and an application focus on steel turning, the insert supports productive machining with reduced downtime. Benefit from the Tiger·tec Gold coating and the RP7 chipbreaker for reliable surface quality and predictable tool life — order directly via Metav Werkzeuge or consult the team for specification support. WNMG100608-RP7 WPP20G – Trigon 80° indexable turning insert for steel, Tiger·tec Gold (Walter Tools) A WNMG100608-RP7 WPP20G indexable turning insert engineered for steel turning, combining a Trigon 80° form with RP7 chip control and Tiger·tec Gold coated carbide Tiger·tec Gold coated carbide Trigon 80° geometry for robust cuts RP7 chipbreaker for stable chip control Higher productivity through optimised coating and substrate The combination of a Tiger·tec Gold coating and a coated carbide substrate delivers markedly improved wear resistance and thermal stability during steel machining. This design reduces flank and crater wear, which in turn maintains cutting performance over longer tool life cycles. The insert’s WPP20G grade is optimised for common steel grades (ISO group P), providing a balance between toughness and hardness that supports stable metal removal and fewer tool changes. For operations where cycle time and repeatability matter, the coated substrate offers a direct process advantage. Predictable chip formation and surface integrity Thanks to the RP7 chipbreaker and the Trigon 80° geometry, chip flow is stabilised across a range of feed rates and cutting depths. Stable chips reduce the risk of built-up edge and improve surface finish on the workpiece, which means fewer secondary operations. The 0° (negative) relief and a 0.8 mm corner radius contribute to robust edge strength for interrupted cuts or tough machining conditions. Together these features enable a consistent machining result and lower scrap rates in production environments. Practical handling and compatibility for workshop use The insert is supplied in the WNMG form factor with a thickness code of 06 and an insert size designation of 10, making it compatible with a wide range of standard turning toolholders designed for Trigon inserts. The tolerance class M ensures repeatable seating and stable clamping in the toolholder pocket. Because the grade is designed specifically for steel machining, operators and planners can expect straightforward application settings and predictable wear progression, simplifying tool management and inventory decisions. Application pointers for efficient implementation When integrating the insert into a process, favour cutting speeds and feeds aligned with steel machining best practices and verify coolant strategy for optimal heat control. The WPP20G grade performs well under conventional flood and high-pressure coolant conditions; however, settings should be validated on the specific steel alloy in use. Using the insert in a stable clamping setup and monitoring wear indicators will extend effective lifetime and contribute to more consistent component quality. Contact Metav Werkzeuge for tailored selection advice and availability of Walter Tools inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application parameters and stocking options Technical Data Article number: WNMG100608-RP7-WPP20G-WALTER Designation: WNMG100608-RP7 WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Core data Insert shape: Trigon 80° Insert size: 10 Thickness code: 06 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Special features Grade: WPP20G (coated carbide) Chipbreaker: RP7 Application group: Steel (ISO P) Execution code: G FAQ What steels is this insert suitable for? The WNMG100608-RP7 WPP20G insert is formulated for steels (ISO group P) and performs well on a range of unalloyed and alloyed steels thanks to the Tiger·tec Gold coating. How does the RP7 chipbreaker affect machining? The RP7 chipbreaker provides controlled chip formation, improving evacuation and reducing the risk of built-up edge, which enhances surface finish and process stability with this Walter Tools turning insert. Can the Trigon 80° form be used for roughing and finishing? Yes, the Trigon 80° geometry combined with a 0.8 mm corner radius offers robustness for semi‑finishing and roughing; finishing performance depends on feed, depth of cut and machine rigidity. Is the insert suitable for interrupted cuts? The negative 0° relief and robust corner radius give the insert high resistance to edge chipping, making it suitable for interrupted cuts and heavy engagement scenarios when used in a stable holder. What toolholders are compatible with this insert? Standard toolholders designed for WNMG Trigon inserts accept the WNMG100608-RP7 WPP20G; ensure correct clamping and seat conditions to maintain tolerance class M performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the brands cited. The item offered is original, factory‑new goods from the manufacturer Walter Tools.
WNMG100612-MK5 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, precise chip control and robust geometry for uninterrupted production on cast iron components; order the WNMG100612-MK5 WKK10S directly via Metav Werkzeuge or consult the team for application advice. WNMG100612-MK5 WKK10S — Indexable Turning Insert, Tiger‑tec Silver, for Cast Iron (Trigon 80°) — Walter Tools The WNMG100612-MK5 WKK10S is a trigon indexable insert from the Tiger‑tec Silver series, engineered with a negative 0° rake to deliver consistent performance when machining cast iron components. Tiger‑tec Silver coating for high wear resistance Optimised for cast‑iron machining (ISO K) Trigon 80° form with 1.2 mm corner radius MK5 chipbreaker for reliable chip control Higher productivity through coating and grade benefits The Tiger‑tec Silver grade WKK10S combines a wear‑resistant coated carbide body with geometry tuned for brittle, abrasive cast‑iron chips. This results in reduced flank wear and a more consistent tool life, meaning fewer interruptions for insert changes and a steadier production rhythm. The coated hardmetal substrate offers a balance of wear resistance and toughness that is particularly beneficial for interrupted cuts and variable surface conditions often encountered on cast‑iron workpieces. By matching the grade to the material group, process stability and repeatable surface quality are improved. Secure cutting behaviour and dependable chip management Built with an MK5 chipbreaker and a Trigon 80° shape, the insert provides controlled chip formation and evacuation in short, brittle chips typical of cast iron. The MK5 geometry promotes predictable chip flow and reduces the risk of entanglement, while the trigon form gives strong cutting edges and effective insert seating in standard WNMG pockets. The negative 0° rake enhances edge robustness under heavy cuts, supporting stable cutting forces and lowering the likelihood of edge chipping. These characteristics translate into fewer rejects and more reliable cycle times for batch and serial production. Practical mounting and consistent positioning for workshop use Tolerance class M and a corner radius of 1.2 mm ensure consistent seating and repeatable edge position in the toolholder, which simplifies process setup and inspection routines. The insert’s dimensions and the thickness code support rigid clamping, while the grade’s balance of abrasion resistance and toughness helps maintain cutting performance across diverse cast‑iron grades. Reduced variability in edge condition shortens downtime for adjustments and contributes to overall machining economy, making this insert a practical choice for shops aiming to improve uptime and reproducibility. For high‑performance cast‑iron turning with Walter Tools’ Tiger‑tec Silver grade, contact Metav Werkzeuge for application support and availability via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: WNMG100612-MK5-WKK10S-WALTER Label: Drehwendeschneidplatte WNMG100612-MK5 WKK10S Walter Tools Product type: Indexable turning insert Series: Tiger‑tec Silver Grade: WKK10S Execution: G Core data Corner radius: 1.2 mm Plate form: Trigon 80° Plate size: 10 Plate thickness code: 06 Free angle: 0° (negative) Tolerance class: M Features / Special attributes Chipbreaker: MK5 Coating / substrate: Coated carbide (Tiger‑tec Silver) Material application: Cast iron (ISO group K) Shape advantages: Robust edge and secure seating FAQ Is this insert suitable for cast‑iron components? Yes. The WNMG100612-MK5 WKK10S from Walter Tools is specifically optimised for cast‑iron (ISO group K) machining and matched to the abrasive, short‑chip behaviour of such materials. What advantages does the Tiger‑tec Silver grade offer? Tiger‑tec Silver provides a coated carbide surface that increases wear resistance, enhances edge life under abrasive conditions and helps maintain consistent surface finish during extended production runs. How does the MK5 chipbreaker affect performance? The MK5 chipbreaker promotes controlled chip formation and evacuation for short, brittle chips typical of cast iron, improving process reliability and reducing the risk of chip interference. Can the trigon form be used in standard WNMG toolholders? Yes. The Trigon 80° geometry is compatible with standard WNMG pockets and offers a strong cutting edge for heavy interruptions and stable clamping. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no association between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer.
WNMG100612-MK5 WKK20S MK5 Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger·tec Silver coating and a robust MK5 chipformer for reliable productivity when machining cast iron; order directly via Metav Werkzeuge or consult our technical team for process optimisation. WNMG100612-MK5 WKK20S turning indexable insert for cast iron – Walter Tools WNMG100612-MK5 WKK20S is a turning indexable insert engineered for efficient, repeatable machining of cast iron components in industrial turning operations. Tiger·tec Silver coated carbide Trigon 80° insert for stable cutting MK5 chipformer for short chips 1.2 mm corner radius for robust edge Greater productivity through wear-resistant grade and coating The combination of the WKK20S grade and the Tiger·tec Silver coating targets the abrasive wear and short, breaking chips typical of cast iron machining. This coating technology enhances lubricant retention and reduces flank wear, which translates into longer tool life and fewer indexings. For production environments where consistent cycle times matter, the coated carbide substrate provides a measurable improvement in process reliability and overall throughput. The specified chip control features are designed to maintain stable cutting forces, reducing the risk of unexpected tool changes and downtime. Improved cutting stability from geometry and edge design The Trigon 80° geometry and a 1.2 mm corner radius deliver a stiff cutting edge that resists chipping under interrupted cuts common in cast iron workpieces. The insert’s 0° negative rake (noted as 0° (negative)) contributes to a strong cutting edge and predictable engagement with the workpiece. In practice, a negative rake increases edge toughness at the expense of slightly higher cutting forces; this trade-off is deliberate for abrasive materials where edge integrity is paramount. Tolerance class M ensures consistent fit in standard toolholders, supporting repeatable positioning and high process security. Practical advantages and machining guidance for reliable results Built with an MK5 chipbreaker, the insert shapes chips into short, manageable segments, improving evacuation and reducing risk of entanglement in automated and manual lathes. The grade is specified for material group K (cast iron) according to ISO 513, ensuring the substrate and coating are matched to the wear mechanisms encountered. Integration into existing turning systems is straightforward: the insert fits standard WNMG pockets and benefits from established clamping systems. For best results, couple the insert with stable workholding, moderate cutting speeds appropriate for cast iron, and a coolant strategy aligned to shop practice to balance tool life and surface finish. For technical advice on inserting this Walter Tools turning insert into an existing tool setup or to request tailored cutting parameter recommendations, contact Metav Werkzeuge for prompt support and application consulting. Technical Data SKU: WNMG100612-MK5-WKK20S-WALTER Designation: WNMG100612-MK5 WKK20S Type: turning indexable insert Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Shape: Trigon 80° Corner radius: 1.2 mm Thickness: 06 Size: 10 Free rake: 0° (negative) Tolerance class: M Chipformer: MK5 Special features Grade: WKK20S Coating: Tiger·tec Silver Material group suitability: K (cast iron) Optimised for abrasive wear and short, breaking chips Stable edge for interrupted cuts FAQ Which materials is this insert intended for? The WNMG100612-MK5 WKK20S turning insert is optimised for cast iron (material group K according to ISO 513) and is specifically designed to handle the abrasive wear characteristics of such materials. What benefits does the Tiger·tec Silver coating provide? Tiger·tec Silver improves wear resistance and heat management, resulting in longer tool life and more consistent machining performance when the WKK20S grade is used on cast iron. How does the MK5 chipformer affect machining? The MK5 chipformer produces short, controlled chips that improve evacuation and reduce the likelihood of chip-related interruptions, supporting safer and more stable turning operations. Is the insert compatible with standard WNMG toolholders? Yes, the insert matches standard WNMG pockets and tolerance class M ensures consistent seating and repeatable positioning in widely used turning toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanation and identification. There is no affiliation between our company and the listed manufacturers; the offered article is an original, factory-new product of the stated brand.
WNMG100612-MM5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, proven MM5 chip control, and robust trigon geometry to increase process reliability and extend tool life; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. WNMG100612-MM5 WMP20G Turning insert – Trigon 80°, for stainless steel – Walter Tools WNMG100612-MM5 WMP20G is a coated turning insert optimised for machining stainless steel under medium to heavy conditions Tiger·tec Gold coated grade WMP20G Trigon 80° geometry for robust turning MM5 chipbreaker for secure chip control 1.2 mm corner radius for increased edge strength Superior grade for demanding stainless-steel turning The WMP20G grade, part of the Tiger·tec Gold series, is a coated carbide solution developed for machining stainless steel where heat generation and built-up edge are critical. The advanced coating improves thermal stability and wear resistance, which translates into longer intervals between indexings and fewer tool changes. For production environments this yields measurable improvements in uptime and component consistency. The insert’s MM5 chipbreaker supports controlled chip formation in difficult-to-cut alloys, reducing the risk of chip entanglement and promoting secure evacuation. Geometry built for stability and repeatable edge life With a Trigon 80° platform and a 1.2 mm corner radius, the geometry prioritises edge strength and resistance to chipping during interrupted cuts or heavy cross-sections. The negative 0° rake angle contributes to a stronger cutting edge and stable cutting forces, which benefits heavier cuts and roughing operations. Corner radius choices influence surface finish and edge robustness: a larger radius increases strength and tool life, while maintaining acceptable surface quality for many turning tasks. This insert’s configuration is therefore suited to operations where repeatable performance and predictable tool wear are required. Integrating the insert into production for consistent results Selecting the correct insert grade and geometry is the rational route to improved throughput. The combination of Tiger·tec Gold technology and the MM5 chipbreaker reduces vibration and promotes continuous metal removal with fewer interruptions. For shops transitioning from general-purpose grades, this insert offers higher reliability when machining ferritic, austenitic or duplex stainless steel variants. The tolerance class M and coated substrate provide consistent cutting behaviour across batches, simplifying parameter transfer between machines. For best outcomes, pair the insert with a compatible toolholder designed for WNMG geometry and adjust feed to match the corner radius for desired surface finish. For process-specific recommendations or to request a quote for WMP20G grade inserts contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will advise on optimal grades, holders and cutting parameters Technical data Article number: WNMG100612-MM5-WMP20G-WALTER Designation: WNMG100612-MM5 WMP20G Product type: Turning insert Manufacturer: Walter Tools Facts Corner radius: 1.2 mm Plate form: Trigon 80° Freedom angle: 0° (negative) Plate size: 10 mm Thickness: 6 mm Tolerance class: M Special features Coating / grade: WMP20G (Tiger·tec Gold) Substrate: coated carbide Chipbreaker: MM5 Application: stainless steel machining Series: Tiger·tec Gold FAQ Is this insert suitable for austenitic stainless steels? Yes. The WNMG100612-MM5 WMP20G turning insert from Walter Tools is designed for stainless steel and performs well on austenitic grades, offering stable chip formation and resistance to built-up edge. Which chipbreaker is fitted and what is its benefit? The insert features the MM5 chipbreaker, which promotes secure chip control in tough-to-cut stainless steels and reduces the likelihood of chip-related interruptions in automated turning operations. What does the Trigon 80° form mean for cutting? Trigon 80° geometry provides a robust seating and stronger cutting edge, improving resistance to mechanical stresses during roughing and intermittent cutting compared with sharper geometries. Can this insert be used in existing WNMG toolholders? Yes. The geometry and ISO designation WNMG100612-MM5 WMP20G conform to standard WNMG toolholder interfaces; pairing with a properly clamped holder is recommended for repeatable results. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating enhances thermal stability and wear resistance, extending cutting edge life and enabling more consistent performance when machining challenging stainless steel grades. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product from the manufacturer.
WNMG100612-MM5 WSM20S MM5 Wendeplatten - Walter Tools
High-performance grade and a robust chipformer deliver consistent results on difficult-to-machine materials; rely on the combination of Tiger·tec Silver coating and the MM5 chipbreaker to extend edge life and secure process stability. Order or request application advice via Metav Werkzeuge for a fast technical consultation. WNMG100612-MM5 WSM20S — Indexable turning insert, Trigon 80°, WSM20S by Walter Tools WNMG100612-MM5 WSM20S is a trigon indexable turning insert designed for heavy-duty and difficult-to-machine materials, especially rostfreier Stahl and heat-resistant superalloys Tiger·tec Silver coated carbide grade WSM20S Trigon 80° form for secure engagement 0° negative rake for maximum edge stability MM5 chipbreaker for controlled chip formation Consistent productivity through stable edge and coating technology The Tiger·tec Silver coating and the WSM20S grade combine to provide enhanced heat resistance and improved wear behaviour when turning demanding alloys. This results in fewer tool changes and a steadier process flow. The coated carbide substrate supports a stable cutting edge, which reduces the risk of built-up edge when machining rostfreier Stahl and superalloys; the net effect is longer productive cutting times and more predictable component quality. For production environments where cycle time and repeatability matter, this insert contributes directly to higher throughput and lower process variability. Secure cutting geometry for reliable engagement and surface finish The trigon 80° plate form and the 0° (negative) rake angle prioritise edge strength and cutting security. The corner radius 1.2 mm absorbs cutting forces and reduces chatter, while the robust geometry supports consistent surface integrity on difficult materials. The MM5 chipbreaker is engineered for controlled chip segmentation, improving swarf evacuation and reducing the likelihood of chip re-cutting. In practical terms, this means fewer rejects and less rework when producing turned components from tough alloys or rostfreier Stahl. Application benefits: what this insert delivers on the shop floor Specifically developed for applications in groups S and M according to ISO 513, the insert enables confident machining of heat-resistant superalloys and rostfreier Stahl by combining thermal stability with reliable chip control. The insert's execution and tolerance class emphasise repeatable seating and dimensional accuracy in common toolholders. For manufacturers aiming to balance high material removal rates with consistent surface quality, the combination of Tiger·tec Silver, the MM5 chipbreaker and the trigon geometry supports both aggressive and finishing passes, reducing cycle times without compromising component integrity. For machining challenges involving rostfreier Stahl or superalloys with a need for process security and long tool life, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for specific application guidance and availability Technical Data Article number: WNMG100612-MM5-WSM20S-WALTER Name: Drehwendeschneidplatte WNMG100612-MM5 WSM20S Walter Tools Brand: Walter Tools Product type: Drehwendeschneidplatte ISO designation: WNMG100612-MM5 WSM20S Core data Insert size: 10 Corner radius: 1.2 mm Free angle: 0° (negative) Thickness code: 06 Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WSM20S Chipformer: MM5 Plate form: Trigon 80° Execution: G Material groups: S / M Suitable for: rostfreier Stahl FAQ What materials is this insert suitable for? The WNMG100612-MM5 WSM20S insert is specified for machining groups S (superalloys, titanium) and M (rostfreier Stahl) and is optimised for these challenging materials. Which chip control feature ensures safe swarf management? The MM5 chipbreaker integrated in this insert provides controlled chip segmentation, improving evacuation and preventing entanglement in turning operations. How does the trigon 80° form affect cutting behaviour? The trigon 80° shape increases engagement security and supports robust cutting edges; this geometry is beneficial for heavy cuts and maintaining surface finish on demanding alloys. Is the coating suitable for high-temperature cutting? Yes—the Tiger·tec Silver coating on the WSM20S grade enhances heat resistance and wear performance, supporting longer tool life in high thermal loads. Which tolerance and execution are provided for repeatable mounting? The insert comes in tolerance class M and execution G, which ensure consistent seating and repeatable performance in standard toolholders. Hersteller: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned exclusively for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of Walter Tools.
WNMG100612-MM5 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of a high-performance combination of Tiger·tec Silver coating and the WSM30S grade for secure chip formation in demanding materials; the negative 0° rake and Trigon 80° form provide robust edge stability for long production runs. Order directly via Metav Werkzeuge or request application advice from our consultants for process optimisation. WNMG100612-MM5 WSM30S indexable turning insert — Tiger·tec Silver, Trigon 80° geometry, Walter Tools The WNMG100612-MM5 WSM30S is a coated carbide turning insert designed for heavy-duty machining of stainless steels and heat-resistant superalloys, offering a trigon 80° form with MM5 chipbreaker for controlled swarf evacuation Tiger·tec Silver coating technology Optimised MM5 chip control Trigon 80° with 1.2 mm corner radius Suitable for stainless steels and superalloys Reliable performance for difficult-to-machine alloys The combination of a coated carbide grade and the Tiger·tec Silver technology creates a balance of thermal resistance and wear protection that benefits turning processes of tough alloys. The cutting material is specified as WSM30S, a coated carbide grade engineered for heat resistance and stable cutting-edge behaviour when machining stainless steels and superalloys. These properties reduce the risk of built-up edge and support consistent dimensional repeatability, which in turn improves process reliability and reduces scrap rates. The insert designation confirms suitability for industrial turning tasks where edge security and predictable tool life are required. Geometry and chip control that stabilise cutting conditions The Trigon 80° plate form with a 1.2 mm corner radius and a 0° negative rake combines strength with a cutting-edge shape that withstands shock and interrupted cuts. The MM5 chipbreaker is tuned to break and evacuate chips effectively in sticky or gummy materials, enhancing surface finish and protecting the tool flank from excessive heat. For shops moving between stainless and nickel-based alloys, this geometry supports uniform chip formation and reduces the need for frequent tool changes, contributing to higher machine availability and lowered cycle-time variability. Practical benefits and machining guidance In production environments that prioritise throughput and repeatability, this insert helps to extend service intervals and maintain component quality. The grade and coating are optimised for materials classified under ISO 513 as type M (stainless steels) and S (heat-resistant superalloys and titanium), making it a pragmatic choice for aerospace, energy and chemical-industry components. When integrating the insert into a cutting programme, consider coolant strategy and cutting parameters that favour moderate cutting speeds and stable feeds to exploit the coating’s thermal advantages; this approach supports longer tool life and consistent surface integrity. Contact Metav Werkzeuge today for tailored advice on integrating Walter Tools Tiger·tec Silver inserts into machining processes and to secure the correct inserts for stainless steel and superalloy applications Technical data Article number: WNMG100612-MM5-WSM30S-WALTER Designation: WNMG100612-MM5 WSM30S Series: Tiger·tec Silver Brand: Walter Tools Facts Size: 10 Corner radius: 1.2 mm Rake angle: 0° (negative) Thickness: 06 Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WSM30S (coated carbide) Chipbreaker: MM5 Plate form: Trigon 80° Application groups: M (stainless steels), S (superalloys/titanium) Designed for difficult-to-machine materials and secure chip formation FAQ What materials is this insert suitable for? The WNMG100612-MM5 WSM30S is engineered for stainless steels (ISO group M) and heat-resistant superalloys/titanium (ISO group S), exploiting the Tiger·tec Silver coating for thermal and wear resistance. How does the MM5 chipbreaker affect machining? The MM5 chipbreaker on this turning insert promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of chip-related downtime when machining ductile or gummy materials. What is the benefit of the Trigon 80° shape and 1.2 mm radius? The Trigon 80° form with a 1.2 mm corner radius provides a robust cutting edge that resists breakage in interrupted cuts and supports stable dimensional control in production turning. Is this insert suitable for interrupted cuts or heavy roughing? Yes, the negative 0° rake and the trigon geometry deliver edge strength and shock resistance that make the insert appropriate for interrupted cutting and heavier depth-of-cut applications. How should cutting parameters be adapted for best tool life? Optimise cutting speeds and select feeds that maintain consistent chip formation; the Tiger·tec Silver coating benefits from coolant strategies and moderate to higher stability in the cutting zone to extend tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. The mentioned brand names are used for explanation only and do not imply any affiliation between our company and the named brands. The offered item is original, factory-new stock.
WNMG100612-MP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, reliable chip control and a stable negative rake geometry for consistent steel turning results; the MP5 chipbreaker and Tiger‑tec Gold coating extend productive cutting windows and reduce tool change frequency. Order the WNMG100612‑MP5 WPP10G directly via Metav Werkzeuge or ask our consultants if needed. WNMG100612‑MP5 WPP10G turning indexable insert — Tiger‑tec Gold, Trigon 80°, r 1.2 mm (Walter Tools) A WNMG100612‑MP5 WPP10G turning insert designed for robust steel machining with a coated carbide grade from the Tiger‑tec Gold series, optimised for secure cutting and controlled chip formation Tiger‑tec Gold coated carbide MP5 chipbreaker for steel applications Trigon 80° form with 1.2 mm corner radius Negative rake 0° for stable cutting Consistent metal removal through engineered coating and chip control The Tiger‑tec Gold coating and a coated carbide substrate ensure enhanced resistance to abrasive wear and thermal loading during steel cutting. Combined with the MP5 chipbreaker, the geometry promotes predictable chip control, which reduces rework and downtime. For workshop environments handling unalloyed and alloyed steels, this results in longer uninterrupted runs and more consistent surface quality. The technical design focuses on measurable process improvements rather than vague claims. Stable cutting performance with a trigon form and negative rake The Trigon 80° insert shape and negative rake 0° provide a solid cutting edge and improved edge support during heavy cuts. The insert’s 1.2 mm corner radius gives a balance between edge strength and surface finish, making it suitable for roughing and medium finishing passes. These geometry choices reduce vibration risk and deliver repeatable dimensional control under varied cutting conditions, contributing directly to higher productivity on serial turning tasks. Practical benefits for workshop planning and tool life Using this grade reduces the frequency of insert changes thanks to the wear‑resistant coating and stable edge retention. The insert thickness and trigon layout allow multiple indexed cutting corners per insert, improving cost efficiency per machined part. The design supports predictable tool life windows, which simplifies production planning and inventory control for turning operations on steels. Material suitability and application focus Specifically engineered for steel applications (ISO group P), the insert’s properties suit a broad range of steels encountered in general machining. The MP5 chipbreaker geometry is calibrated for the thermal and chip formation behaviour typical of steel turning, enabling reliable swarf evacuation and reduced risk of built‑up edge. In practice this means fewer interruptions, safer chip handling and a more stable machining process overall. For precision steel turning with proven Tiger‑tec Gold performance, choose the Walter Tools WNMG100612‑MP5 WPP10G and contact Metav Werkzeuge for application advice or to secure supply via their consultancy service. Technical data Article number: WNMG100612‑MP5‑WPP10G‑WALTER Product type: Turning indexable insert Manufacturer: Walter Tools Grade: WPP10G Series: Tiger‑tec Gold Shape: Trigon 80° Chipbreaker: MP5 Execution: G ISO designation: WNMG100612‑MP5 WPP10G Basic designation: WNMG100612‑MP5 Facts Size: 10 mm Corner radius: 1.2 mm Thickness: 0.6 mm Relief/clearance angle: 0° (negative) Tolerance class: M Special features Coating: Tiger‑tec Gold (coated carbide) Material application: Steel (ISO P) Chip control: MP5 geometry Insert form: Trigon 80° Multiple cutting edges per insert FAQ What materials is this insert suitable for? The WNMG100612‑MP5 WPP10G is specified for steel machining (ISO group P) and its MP5 chipbreaker is tuned for typical steel chip formation. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on this Walter Tools grade increases wear resistance and thermal stability, extending tool life and supporting longer, uninterrupted production runs. What advantage does the Trigon 80° form provide? The Trigon 80° shape gives robust edge support and three usable cutting corners, combining strength for heavier cuts with efficient indexing. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brand. The offered article is an original, factory‑new product from Walter Tools.
WNMG100612-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the MP5 chipbreaker for consistent chip control and extended edge life; combine this with the robust Trigon geometry for stable turning of steel and secure supply via Metav Werkzeuge for uninterrupted production. WNMG100612-MP5 WPP20G indexable turning insert — Trigon 80°, Tiger·tec Gold coating (Walter Tools) The WNMG100612-MP5 WPP20G is an indexable turning insert designed for reliable steel machining in general turning applications, offering high process stability and repeatable surface quality Tiger·tec Gold coating for high wear resistance Trigon 80° geometry for stable cutting forces MP5 chipbreaker for predictable chip formation 1.2 mm corner radius for edge security Consistent performance for steel machining The coated carbide grade WPP20G, part of the Tiger·tec Gold family, is optimised for machining steel (ISO P) and balances wear resistance with toughness. The combination of the WPP20G grade and the MP5 chipbreaker produces stable chip formation, reducing the risk of built-up edge and improving dimensional consistency. This results in fewer interruptions for tool changes and more predictable cycle times, which supports higher throughput on turning centres. For customers seeking measurable productivity gains, the technical design focuses on delivering repeatable results across a broad range of steels. Geometry engineered to increase process security The Trigon 80° form with a 1.2 mm corner radius and a 0° (negative) rake angle gives a robust edge that resists mechanical shock and vibration during heavier cuts. The insert’s shape concentrates cutting forces in a controlled way, which improves tool life and reduces chatter tendency in unstable setups. The nominal thickness and edge configuration also simplify toolholder selection and setup, lowering the time required for process qualification. In practical terms, the geometry helps to maintain surface finish and dimensional accuracy over longer tool lifetimes. Economical operation through coating and edge technology The coated carbide construction of this insert offers enhanced abrasion resistance and thermal stability compared with uncoated grades. The Tiger·tec Gold coating technology is engineered to extend usable life under typical steel cutting temperatures and to maintain a sharp cutting edge for longer. Reduced flank wear and a more predictable wear pattern translate into lower tooling costs per component and reduced machine downtime. For production environments where tool change frequency impacts overall efficiency, the coating and chip control together support a favourable cost-in-use profile. Application guidance and practical advantages This insert is intended primarily for turning operations on steel under the ISO P classification and is suitable for a range of operations from light finishing to more productive general turning, depending on cutting data and rigidity of the setup. The MP5 chipbreaker is tuned for medium to long chips, improving evacuation in through-cut and facing operations. For best results, pair the insert with a compatible toolholder and establish cutting parameters based on material grade and machine rigidity; machining trials under controlled conditions will determine optimal speeds and feeds. If further cutting data or assistance is required, technical advice is available. For precise cutting data, availability and supply of the Walter Tools WNMG100612-MP5 WPP20G insert, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and delivery options Technical Data Article number: WNMG100612-MP5-WPP20G-WALTER Product name: Drehwendeschneidplatte WNMG100612-MP5 WPP20G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP20G Chipbreaker: MP5 Facts Insert form: Trigon 80° Insert size: 10 Corner radius: 1.2 mm Thickness: 06 Free angle: 0° (negative) Tolerance class: M Special features Coating / grade: Tiger·tec Gold (coated carbide) Material application: Steel (ISO P) Execution: G ISO designation: WNMG100612-MP5 WPP20G FAQ What materials is this insert suitable for? The Walter Tools WNMG100612-MP5 WPP20G is formulated for machining steel (ISO P); the WPP20G grade balances wear resistance and toughness for a broad range of steels. Which chip shape can be expected with the MP5 chipbreaker? The MP5 chipbreaker promotes medium to long chip segmentation and stable evacuation, helping to avoid entanglement in turning and facing operations. How does the Trigon 80° form affect cutting forces? The Trigon 80° geometry concentrates forces to improve edge stability and reduce vibration, which supports better surface finish and repeatable dimensions in less rigid setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and product names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no affiliation between Metav Werkzeuge and the named brands. The offered item is an original, brand-new product from the stated manufacturer.
WNMG100612-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold grade and the RP5 chipbreaker for consistent chip control and extended tool life; the result is reliable, productive steel turning. Secure supply and professional selection support through Metav Werkzeuge or consult the specialists for application advice. WNMG100612-RP5 WPP10G — Indexable turning insert for steel (Walter Tools) A WNMG100612-RP5 WPP10G indexable insert designed for productive steel turning, offering robust edge stability and optimised chip control for machining operations Tiger·tec Gold coating RP5 chipbreaker for stable chips Trigon 80° geometry Corner radius 1.2 mm Boosted productivity through advanced coating and grade The coated WPP10G grade, part of the Tiger·tec Gold family, is formulated to improve durability when machining steel. The combination of a wear-resistant coating and a tough substrate leads to fewer insert changes and longer tool life, which translates into lower process costs and less downtime. By reducing flank wear and maintaining a stable cutting edge, the insert supports higher material removal rates and consistent cycle times, making it suitable for serial production where repeatable performance matters. Stable chip control and improved surface quality The RP5 chipbreaker and Trigon 80° geometry work together to produce predictable chip formation and evacuation, reducing the risk of chip re-cutting and vibration. A controlled chip flow contributes directly to a more uniform surface finish and reduces secondary finishing effort. The 1.2 mm corner radius provides a robust cutting edge that withstands interrupted cuts, while the negative clearance (0°) geometry helps maintain dimensional stability during heavy cuts. Easy integration with standard turning tool systems The WNMG form is an established indexable insert profile that integrates into common toolholder systems, enabling straightforward replacement and indexing. The tolerance class M ensures consistent seating and repeatable positioning, aiding process stability across multiple tool changes. Consistent insert geometry and grade selection simplify tool management and support predictable machining results in both single- and multi-shift operations. Optimised for a wide range of steel applications This insert is explicitly tuned for the ISO P material group, covering unalloyed and alloyed steels encountered in general engineering and production workshops. The WPP10G sort balances wear resistance and toughness—suitable for a broad spectrum of finishing and medium-turning tasks on steel. Where chip control and edge security are priorities, this solution provides dependable performance and improved overall machining economy. Contact Metav Werkzeuge for tailored recommendations on Walter Tools inserts and to arrange supply of the WNMG100612-RP5 WPP10G; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the best grade and geometry for the specific steel application Technical data SKU: WNMG100612-RP5-WPP10G-WALTER Designation: WNMG100612-RP5 WPP10G Series: Tiger·tec Gold Manufacturer: Walter Tools Specifications Size code: 10 Thickness code: 06 Corner radius: 1.2 mm Free clearance: 0° (negative) Tolerance class: M Special features Coating/Grade: WPP10G (Tiger·tec Gold) Chipbreaker: RP5 Insert shape: Trigon 80° Material application: steel (ISO P) Form: WNMG100612-RP5 FAQ What materials is this insert suitable for? The WNMG100612-RP5 WPP10G insert from Walter Tools is optimised for the ISO P group and is intended primarily for machining steel, including unalloyed and alloyed steels. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on this insert promotes controlled chip formation and evacuation, which improves surface finish and reduces the likelihood of chip interference during turning operations. Is the insert suitable for interrupted cuts? Yes, the robust 1.2 mm corner radius and the coated WPP10G grade provide edge strength that enhances resistance to mechanical shock during interrupted cuts. Can this insert be used in standard WNMG holders? The insert follows the WNMG form factor and the tolerance class M for consistent seating, allowing straightforward integration with compatible turning toolholders. What production advantages does Tiger·tec Gold offer? Tiger·tec Gold coating on the WPP10G grade increases wear resistance while maintaining toughness, delivering longer tool life and more consistent performance in serial production. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
WNMG100612-RP5 WPP20G G Wendeplatten - Walter Tools
A high-performance coated carbide insert combining Tiger·tec Gold wear resistance with an RP5 chipbreaker for consistent chip control and a robust 1.2 mm corner radius for extended edge life. Order the WNMG100612-RP5 WPP20G directly via Metav Werkzeuge or ask our consultants for machining advice. WNMG100612-RP5 WPP20G trigon 80° indexable insert for steel by Walter Tools — Tiger·tec Gold, 1.2 mm corner radius The WNMG100612-RP5 WPP20G is a trigon 80° indexable turning insert optimised for productive machining of steel, offering a balanced combination of wear resistance and controlled chip formation for stable, repeatable results. Tiger·tec Gold coating for long tool life Trigon 80° geometry for sturdy cutting RP5 chipbreaker for controlled chip formation 1.2 mm corner radius for robust edge strength Productivity gains through proven coated-carbide technology The insert is built on coated carbide technology that targets efficiency in common turning operations on steel (ISO P). Thanks to the Tiger·tec Gold platform and the WPP20G grade, the cutting edge maintains stability under thermal and mechanical load, which reduces the need for frequent index changes and minimises machine downtime. The result is a measurable productivity advantage: longer tool life and more consistent component tolerances, turning operational reliability into a predictable production cadence. Consistent chip control and reduced rework Chip behaviour is a decisive factor in turning processes; the integrated RP5 chipbreaker has been engineered to break and evacuate chips reliably across typical steel grades. This leads to fewer interruptions, less risk of surface damage from recirculating chips and improved operator safety. Combined with the 1.2 mm corner radius, the geometry supports durable cutting edges that absorb intermittent load peaks, which benefits surface integrity and reduces the probability of rework or scrap. Robust geometry for reliable clamping and cutting forces The trigon 80° form offers a geometrically sturdy insert seat and is well suited to applications requiring increased radial engagement and strength. The specified 0° (negative) rake angle provides a stable cutting edge under heavy cuts, while the tolerance class M ensures consistent dimensional accuracy between inserts. These features contribute to repeatable setup and predictable tool life, helping machining lines to maintain cycle-time targets and part quality standards. Practical application advice and process benefits Designed primarily for steel, this grade balances wear resistance and toughness to cover a wide material band within ISO P. For customers new to indexable tooling: the grade designation indicates a coated, general-purpose carbide that is optimised for the thermal and chip-formation characteristics of steel. In production, selecting the correct feed and speed combination together with the RP5 chipbreaker will reduce built-up edge and improve surface finish, delivering both time and cost efficiencies across batch and single-piece work. For tailored machining recommendations on Walter Tools inserts such as the WNMG100612-RP5 WPP20G, contact Metav Werkzeuge for application support and parameter suggestions via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: WNMG100612-RP5-WPP20G-WALTER Description: WNMG100612-RP5 WPP20G Manufacturer: Walter Tools Data Corner radius: 1.2 mm Plate size: 10 Thickness code: 06 Rake angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: RP5 Form: Trigon 80° Material application: Steel (ISO P) FAQ What steels is this insert best suited for? The WNMG100612-RP5 WPP20G is intended for ISO P materials; the WPP20G grade is optimised for a broad range of unalloyed and alloyed steels where balanced wear resistance and toughness are required. How does the RP5 chipbreaker improve process stability? The RP5 geometry promotes predictable chip segmentation and evacuation during turning, which reduces machine interruptions and risk of surface damage from chip entanglement. Can the trigon 80° form be used for heavy radial engagement? Yes, the trigon 80° geometry provides a sturdy seating and is suitable for operations that require increased radial engagement and stable cutting forces. What benefit does the Tiger·tec Gold coating provide? Tiger·tec Gold enhances thermal and abrasive wear resistance, supporting longer tool life and consistent edge integrity under typical steel cutting conditions. Is the insert suitable for finishing operations? With appropriate cutting parameters and the 1.2 mm corner radius, the insert can deliver good surface integrity; optimising speed and feed will improve finish for specific applications. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is original factory-new goods of the manufacturer.
WNMG100612-RP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of a durable Tiger‑tec Gold coating and a robust RP5 chipbreaker to secure consistent tool life and stable chip control in demanding steel turning; order directly via Metav Werkzeuge or consult the team for application support. WNMG100612-RP5 WPP30G Trigon 80° turning insert for steel — Tiger‑tec Gold (Walter Tools) A WNMG100612-RP5 WPP30G turning insert engineered for high-productivity steel machining, combining a coated carbide grade with an RP5 chipbreaker for reliable chip control. Tiger‑tec Gold coated carbide Grade WPP30G for steel machining RP5 chipbreaker for stable chips Trigon 80° with 1.2 mm corner radius Enhanced wear resistance for steady cycle times The Tiger‑tec Gold technology in this insert delivers consistent wear resistance, enabling longer tool life and fewer interruptions in serial production. As a coated carbide designed for P‑group materials, the grade provides a balance between abrasion resistance and toughness, which translates into stable cutting parameters when machining a range of steels. For operations where reproducibility matters, this combination reduces the frequency of tool changes and supports predictable cycle times, contributing directly to improved shop-floor efficiency. Geometry and chip management for better surface quality The Trigon 80° shape and the RP5 chipbreaker work together to ensure controlled chip formation and secure edge strength during interrupted or continuous cuts. The slightly negative 0° rake and a 1.2 mm corner radius strengthen the cutting edge against thermal and mechanical stress, which helps maintain dimensional accuracy and surface finish. Good chip control from the chipbreaker reduces the risk of re-cutting and tool damage, while the trigon form supports stability in heavy and light cuts alike — a practical advantage when machining mixed batches. Practical selection and machining guidance for steel turning Tolerance class M and a plate thickness coded as 06 indicate a robust manufacturing standard and mechanical stability in clamping. The insert is tailored for the ISO P material group, meaning it is particularly suited to unalloyed and alloyed steel grades where conventional heat and chip behaviour occur. When pairing with appropriate toolholders, the hardened substrate and coated top layer of this series support predictable wear and repeatable performance. Walter Tools’ production standards and the Tiger‑tec Gold range are aligned to offer a productive compromise between life and edge reliability for many turning applications. Choose the Tiger‑tec Gold WPP30G option from Walter Tools for consistent steel turning performance — contact Metav Werkzeuge for ordering and application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: WNMG100612-RP5-WPP30G-WALTER Article label: Drehwendeschneidplatte WNMG100612-RP5 WPP30G Walter Tools Manufacturer: Walter Tools Product type: Turning insert ISO designation: WNMG100612-RP5 WPP30G Core specifications Insert size: 10 Thickness code: 06 Corner radius: 1.2 mm Free angle: 0° negative Tolerance class: M Design and special features Coating technology: Tiger‑tec Gold Grade: WPP30G (coated carbide) Chipbreaker: RP5 Geometry: Trigon 80° Suitability: steel (ISO P) Execution: G FAQ What materials is this insert suitable for? The WNMG100612-RP5 WPP30G insert is primarily designed for steel applications and aligns with the ISO P material group for unalloyed and alloyed steels. How does the Tiger‑tec Gold coating benefit machining? The Tiger‑tec Gold coating on the WPP30G grade improves wear resistance and heat management, which helps extend tool life and maintain cutting performance in steel turning. What role does the RP5 chipbreaker play? The RP5 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of re-cutting and enhancing surface finish consistency during turning. Is the Trigon 80° geometry suitable for heavy cuts? Yes, the Trigon 80° form combined with a 1.2 mm corner radius and a negative rake provides edge robustness and stability for a broad range of cutting depths, including heavier interrupted cuts. Which manufacturer produced this insert? The insert is a Walter Tools product, supplied in the Tiger‑tec Gold grade WPP30G and intended for reliable steel machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The item offered is original, brand-new merchandise from Walter Tools.
WNMG100612-RP7 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, reliable chip control and robust geometry to keep turning processes efficient and predictable; order directly via Metav Werkzeuge or consult the technical team for application advice. WNMG100612-RP7 WPP10G — Trigon 80° indexable turning insert, Tiger‑tec Gold, Walter Tools The WNMG100612-RP7 WPP10G is a coated carbide turning insert designed for machining steel, offering a Trigon 80° geometry and a Tiger‑tec Gold coating for long tool life and consistent chip formation. Tiger‑tec Gold coated carbide grade WPP10G RP7 chipbreaker for stable chip control Trigon 80° geometry for versatile turning 1.2 mm corner radius for robust edge Negative 0° rake for heavy cuts Consistent performance through a coated carbide grade The combination of Tiger‑tec Gold and the WPP10G grade delivers a coated carbide solution optimised for steel machining. The coating technology increases resistance to abrasive wear while maintaining sufficient toughness for intermittent cuts, which contributes to longer tool life and fewer insert changes. This results in a more consistent production flow and reduced downtime compared with uncoated grades. The description and material classification indicate the insert is specifically tailored to the thermal and chip-formation behaviour typical of steel turning. Stable cutting and defined geometry for process security The Trigon 80° geometry together with the RP7 chipbreaker ensures controlled chip formation across a broad range of turning operations. The insert’s 1.2 mm corner radius provides an enlarged cutting edge for improved strength and better handling of roughing passes, while the 0° (negative) rake angle supports heavier cuts and secure behaviour in interrupted cuts. Together with the M tolerance class and the thickness code 06, these attributes aid repeatable set-up and predictable component quality under industrial conditions. Application advantages and pragmatic handling This indexable insert is aimed at workshops and production lines needing reliable performance when machining steel (P) grades. The grade’s balance between wear resistance and toughness supports both economy and process reliability: stable edge life reduces tool changes, while predictable chip control simplifies coolant and chip-management strategies. For advice on integrating this insert into an existing toolholder or for selection of a matching grade for different steel alloys, Metav Werkzeuge’s consultants are available to provide practical, application-oriented recommendations. Contact Metav Werkzeuge for tailored application advice on Tiger‑tec Gold inserts and to arrange procurement of Walter Tools turning inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: WNMG100612-RP7-WPP10G-WALTER Label: Drehwendeschneidplatte WNMG100612-RP7 WPP10G Walter Tools Manufacturer: Walter Tools Designation: WNMG100612-RP7 WPP10G Series: Tiger‑tec Gold Facts Geometry: Trigon 80° Size code: 10 Thickness code: 06 Corner radius: 1.2 mm Rake angle: 0° (negative) Tolerance class: M Special features Chipbreaker: RP7 Grade: WPP10G (coated carbide) Material application: Steel (P) Execution: G Series description: coated carbide, Tiger‑tec Gold FAQ What materials is this insert intended for? The WNMG100612-RP7 WPP10G insert is specified for machining steel (material group P); the grade and coating are optimised for the temperatures and chip behaviour typical of steel turning. How does the RP7 chipbreaker affect machining? The RP7 chipbreaker promotes controlled chip formation and evacuation when turning steel, reducing the risk of long, entangling chips and improving surface consistency during continuous and semi-continuous cuts. What advantages does the Tiger‑tec Gold coating provide? Tiger‑tec Gold enhances abrasive-wear resistance while maintaining edge robustness, which extends tool life under standard turning conditions in steel and improves process stability. Is the insert suitable for heavy roughing operations? Yes. The 0° (negative) rake angle combined with the 1.2 mm corner radius and Trigon 80° geometry gives the insert the edge strength and stability required for heavier depth-of-cut operations and interrupted cuts. How should the size and thickness codes be interpreted? The listed codes (size code 10, thickness code 06) identify the insert’s form and dimensions within industry conventions; match these codes to the toolholder specifications to ensure correct seating and clamping. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and brand names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no association between our company and the mentioned brands. The offered item is original, factory-new goods from the manufacturer Walter Tools.
WNMG100612-RP7 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Gold grade and the WPP20G balance of wear resistance and toughness together with a Trigon 80° form and 1.2 mm corner radius for secure clamping and consistent metal removal; order the insert directly via Metav Werkzeuge or consult our advisors for application support. WNMG100612-RP7 WPP20G indexable turning insert — Tiger‑tec Gold coating, Trigon 80°, for steel (Walter Tools) A WNMG100612-RP7 WPP20G indexable turning insert designed for general steel turning, combining a Tiger‑tec Gold coating with a Trigon 80° geometry to deliver stable cutting and long tool life Tiger‑tec Gold coating for long tool life Trigon 80° form for stable cutting RP7 chipbreaker for controlled chips 1.2 mm corner radius for robust edge High-performance coating for extended productivity The combination of Tiger‑tec Gold coating and the WPP20G grade offers a tangible improvement in edge stability and wear resistance when machining ISO P group materials. The coated carbide construction is engineered to resist abrasive wear while maintaining a sharp cutting edge, which translates into fewer tool changes and higher uptime on production runs. For operations seeking to improve batch throughput, the result is more predictable performance and reduced process variability, particularly in long turning cycles. Geometry and chip control that support reproducible results The Trigon 80° plate shape provides a compact seating area that promotes secure clamping and repeatable positioning in standard toolholders. Combined with the RP7 chipbreaker, the geometry is optimised for controlled chip formation when turning steel, reducing the risk of long, stringy chips that complicate handling. The 1.2 mm corner radius enhances edge strength for interrupted cuts and coarse turning, while the negative rake 0° geometry increases robustness at higher feed rates, contributing to consistent surface finish and dimensional stability. Versatile grade characteristics and practical application advice WPP20G is specified for steel applications and represents a balanced approach between wear resistance and toughness, making it suitable for a wide range of unalloyed and alloyed steels. The insert is well suited to medium to heavy turning tasks where reliable edge life and stable chip control are priorities. For best results, pair the insert with a rigid toolholder and appropriate clamping torque; adjust feeds to match the intended surface finish and material class. The combination of grade, chipbreaker and trigon form supports reproducible machining across serial production and job-shop work. For robust, process‑secure steel turning with Tiger‑tec Gold, request application consultation from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and availability Technical data SKU: WNMG100612-RP7-WPP20G-WALTER Name: WNMG100612-RP7 WPP20G Type: indexable turning insert / Drehwendeschneidplatte Manufacturer: Walter Tools Facts Series: Tiger‑tec Gold Grade: WPP20G Plate size: 10 Thickness: 06 Corner radius: 1.2 mm Free rake angle: 0° (negative) Shape: Trigon 80° Tolerance class: M Special features Chipbreaker: RP7 Execution: G Material group application: Steel (ISO P) Sortenbeschreibung: coated carbide (Tiger‑tec Gold) WPL designation: WNMG100612-RP7 FAQ What materials is this insert intended for? The WNMG100612-RP7 WPP20G turning insert is optimised for ISO P materials, i.e. various steels including unalloyed and alloyed steels; the WPP20G grade balances wear resistance and toughness for general steel turning. How does the RP7 chipbreaker influence machining? The RP7 chipbreaker on this insert shapes chips for controlled evacuation during turning, improving process reliability and reducing manual chip handling in steel applications. What advantages does the Trigon 80° form offer? The Trigon 80° geometry provides a compact seating area for secure clamping and repeatable positioning in the toolholder, which supports stable cutting forces and consistent part accuracy. Is the corner radius suited to heavy or interrupted cuts? Yes, the 1.2 mm corner radius increases edge strength and resistance to chipping, making the insert suitable for tougher feeds, interrupted cuts and operations requiring durable edges. Can this insert be used for finishing and roughing operations? The WPP20G grade and RP7 chipbreaker provide a versatile compromise that can be applied to both medium‑duty roughing and general finishing on steels, depending on cutting parameters and toolholder rigidity. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original factory‑new product of the manufacturer Walter Tools.
WNMG100612-RP7 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance and the RP7 chipbreaker geometry for stable, productive turning of Stahl; order the insert directly via Metav Werkzeuge or consult their specialists for cutting data and process recommendations. WNMG100612‑RP7 WPP30G — Turning indexable insert, Tiger‑tec Gold for Stahl by Walter Tools The WNMG100612‑RP7 WPP30G is a coated carbide turning insert designed for reliable metalcutting in Stahl applications, combining a Trigon 80° form with an RP7 chipbreaker for controlled swarf formation. Tiger‑tec Gold coating for enhanced wear resistance Optimised for Stahl machining and chip control Trigon 80° shape for stable cutting performance RP7 chipbreaker for consistent swarf formation Higher tool life through modern coating technology The combination of Tiger‑tec Gold coating and the WPP30G carbide grade provides a balance between abrasion resistance and toughness that supports longer tool life under variable conditions. The coated substrate reduces flank and crater wear during continuous turning, which leads to fewer indexings and less unscheduled downtime. For workshops machining a range of Stahl grades, the coated carbide chemistry is engineered to withstand the typical heat and chip formation patterns encountered in general turning operations, thus improving process stability and repeatability. Geometry that ensures process stability and chip control The Trigon 80° plate form together with the RP7 chipbreaker delivers a predictable chip flow and secure engagement in interrupted cuts. The insert’s corner radius 1.2 mm and negative 0° relief angle contribute to a robust cutting edge that resists chipping while maintaining dimensional stability. These geometric features reduce tool vibration and support higher metal removal rates with consistent surface finish, making the insert well suited to both light- and medium-duty turning where controlled swarf and edge stability are essential. Practical productivity benefits for everyday turning tasks Designed primarily for machining Stahl, the insert offers a pragmatic mix of performance and flexibility, enabling shorter cycle times and consistent component quality. The indexable design simplifies tool replacement and reduces machine downtime; matching the insert to appropriate cutting parameters preserves edge life and lowers cost per component. For bespoke applications or optimised cutting data, Metav Werkzeuge can supply empirical feed and speed recommendations that align the Tiger‑tec Gold advantages with individual machine and workpiece setups. Request personalised cutting data and application advice for the Walter Tools Tiger‑tec Gold WNMG100612‑RP7 WPP30G from Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: WNMG100612-RP7-WPP30G-WALTER Name: Turning indexable insert WNMG100612-RP7 WPP30G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP30G Execution: G Facts Corner radius: 1.2 Relief angle: 0° (negativ) Plate size: 10 Plate thickness: 06 Tolerance class: M Special features Chipbreaker: RP7 Plate form: Trigon 80° Coating: Tiger‑tec Gold Material group: P (Stahl) Application focus: Stahl machining FAQ Which materials is this insert best suited for? The WNMG100612‑RP7 WPP30G insert from Walter Tools is specified for machining Stahl (material group P) and is optimised for the typical heat and chip formation encountered when turning such alloys. What benefits does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WPP30G grade enhances wear resistance and edge security, which increases tool life and contributes to stable cutting performance in continuous turning operations. How do the RP7 chipbreaker and Trigon 80° geometry affect performance? The RP7 chipbreaker promotes controlled swarf formation while the Trigon 80° shape and corner radius 1.2 help maintain a robust cutting edge, reducing vibration and supporting consistent surface quality. Is this insert intended for roughing or finishing applications? The WPP30G grade is a versatile coated carbide designed to balance wear resistance and toughness, making the insert suitable across a range of turning tasks from general-purpose cuts to tougher operations that require a durable edge. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for descriptive purposes only; there is no affiliation between our company and the named brands. The offered item is an original factory‑new product of the manufacturer.
WNMG100616-MK5 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the high wear resistance of the Tiger‑tec Silver grade together with the robust 0° negative rake geometry for stable, productive machining of cast iron; order directly via Metav Werkzeuge or request application advice from our consultants. WNMG100616-MK5 WKK10S — Indexable turning insert, Trigon 80° form, Tiger‑tec Silver, Walter Tools The WNMG100616-MK5 WKK10S is a trigon‑shaped indexable turning insert engineered for efficient machining of cast iron components in industrial turning applications. Tiger‑tec Silver coating for high wear resistance Optimised for cast iron machining (ISO group K) Trigon 80° form with 1.6 mm corner radius 0° negative rake with MK5 chipbreaker Consistent performance for cast iron turning The Tiger‑tec Silver coating combined with a coated carbide substrate provides enhanced abrasion resistance and predictable tool life when machining abrasive cast iron grades. The insert’s grade WKK10S is specifically developed for the ISO group K (cast iron) and balances wear resistance with toughness to handle the short, brittle chips typical of grey and nodular cast irons. The integrated MK5 chipbreaker promotes controlled chip breaking and evacuation, reducing the risk of chip entanglement and improving machining stability on automated turning centres and conventional lathes. Robust geometry for interrupted and stable cutting The trigon 80° insert form and 0° negative rake give a mechanically strong cutting edge, making this indexable insert suited to interrupted cuts and demanding roughing tasks. The 1.6 mm corner radius increases edge robustness and distributes cutting forces, which supports higher material removal rates and consistent surface quality. The negative rake geometry further enhances edge resistance to chipping, while the tolerance class M ensures reproducible seating and repeatable performance in standard toolholders. Productivity and application advantages With a compact plate size and the series’ focus on process reliability, this insert is designed to deliver productive machining cycles and easy insert indexing for extended tool life. The insert is suitable for both roughing and medium finishing of cast iron components, offering a balance between economy and surface integrity. Using this indexable insert in a properly set-up holder reduces downtime for insert changes and supports efficient production runs, particularly where predictable tool behaviour and good chip control are essential for cycle-time improvements. For machining tasks requiring reliable cast iron performance, contact Metav Werkzeuge for tailored application support and ordering assistance — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: WNMG100616-MK5-WKK10S-WALTER Designation: WNMG100616-MK5 WKK10S Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Insert form: Trigon 80° Corner radius: 1.6 mm Relief angle: 0° (negative) Chipbreaker: MK5 Plate size: 10 Plate thickness: 06 Grade / Sort: WKK10S Tolerance class: M Special features Coated carbide grade optimised for cast iron Application group: ISO K (cast iron) Robust edge for interrupted cuts Good chip control for short, brittle chips Designed for productive turning operations FAQ What materials is this insert intended for? The WNMG100616‑MK5 WKK10S insert is optimised for machining cast iron (ISO group K) and the WKK10S grade is tuned for abrasive wear characteristics of those materials. How does the 0° negative rake affect cutting performance? A 0° negative rake increases edge strength and resistance to chipping; with the Trigon 80° form and 1.6 mm corner radius, the insert is well suited to interrupted cuts and heavy‑duty turning operations. Can this insert achieve good chip control? Yes — the MK5 chipbreaker combined with the Tiger‑tec Silver grade promotes controlled chip formation and evacuation, improving process stability during cast iron turning. Is the insert compatible with standard toolholders for WNMG form? The WNMG form is a standard trigon indexable geometry; the WNMG100616‑MK5 WKK10S will seat in holders designed for WNMG inserts with matching size and thickness specifications. What production benefits does the Tiger‑tec Silver series provide? The Tiger‑tec Silver coating enhances wear resistance and repeatable tool life, helping to reduce insert change frequency and maintain consistent machining quality over longer production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is part of a global offering of precision metal‑cutting solutions and delivers high‑quality, reliable cutting materials and tooling systems. Protected trademarks and product names are the property of their respective owners; brand names are used for clarification only and do not imply any affiliation.
WNMG100616-MK5 WKK20S WKK20S Wendeplatten - Walter Tools
Benefit from an abrasive-wear‑optimised cutting grade and robust trigon geometry for steady, repeatable cast iron machining — combine Tiger·tec Silver performance with a 1.6 mm corner radius and a dedicated MK5 chipbreaker to maintain production flow. Order or request advice through Metav Werkzeuge for fast, reliable supply. WNMG100616-MK5 WKK20S indexable turning insert — Trigon 80°, Tiger·tec Silver, Walter Tools The WNMG100616-MK5 WKK20S is a trigon indexable turning insert engineered for productive machining of cast iron components in serial and job-shop environments. Tiger·tec Silver coated carbide grade Optimised for cast iron (K) machining Trigon 80° geometry for robust cutting 1.6 mm corner radius, negative 0° rake Consistent productivity for abrasive cast iron machining The combination of the WKK20S grade and the Tiger·tec Silver coating targets the typical, abrasive wear patterns of cast iron. This results in stable chip formation and extended edge life under interrupted and continuous cuts. The insert’s trigon geometry provides increased cutting edge strength compared with more acute shapes, so interruptions and vibration-prone cuts are less likely to cause edge chipping. For manufacturing planners, this means fewer insert changes, more predictable cycle times and a measurable improvement in process uptime. Robust geometry and chip control for dependable results Featuring a dedicated MK5 chipbreaker and a Trigon 80° form, the insert controls short, brittle chips typical of cast iron. The 1.6 mm corner radius and negative 0° rake contribute to a conservative cutting edge angle that resists breakout during heavy engagement. In practice, these design choices translate into stable tool behaviour during moderate to heavy depths of cut and reliable surface finish, reducing rework and tool-related interruptions on the shop floor. Clear specification for fast integration into production Key specification items are concise and shop-floor ready: the insert’s format and tolerances support standard toolholders for trigon geometries, the coated carbide grade is tuned for K (cast iron) work, and the construction suits medium to high metal-removal rates. For process engineers unfamiliar with the grade nomenclature: WKK20S denotes a coated carbide optimised for cast iron, where the coating enhances resistance to abrasive wear and thermal loading during intermittent cuts. Practical handling and application guidance The insert is intended for turning operations on cast iron components where consistent edge life is required. When replacing round or rhombic inserts with this trigon type, ensure compatible toolholders and check radial clearance to accommodate the 80° form. Where quicker chip evacuation is needed, pairing the MK5 breaker with moderate feed and appropriate coolant strategy supports controlled swarf and reduced machine downtime. The technical balance between edge strength and chip control offers a pragmatic solution for many production tasks. Contact Metav Werkzeuge for tailored application advice and reliable delivery of Walter Tools Tiger·tec Silver inserts to support continuous production. Technical Data SKU: WNMG100616-MK5-WKK20S-WALTER Article: Drehwendeschneidplatte WNMG100616-MK5 WKK20S Walter Tools Series / Coating: Tiger·tec Silver Grade: WKK20S Manufacturer: Walter Tools Execution: G Tolerance class: M Facts Insert size: 10 Thickness code: 06 Corner radius: 1.6 Insert form: Trigon 80° Relief angle: 0° (negative) Special features Chipbreaker: MK5 Coated carbide grade tailored for cast iron Application group: K (cast iron) Abrasive wear resistance optimised Robust edge geometry for interrupted cuts FAQ What materials is this insert suited for? The WNMG100616-MK5 WKK20S insert is designed primarily for cast iron (K) machining and performs well where abrasive wear and short, breaking chips are common. How does the Tiger·tec Silver series benefit production? Tiger·tec Silver coating on the WNMG100616-MK5 WKK20S improves abrasive wear resistance and thermal stability, extending edge life and supporting consistent cycle times in serial production. Which chipbreaker should be selected for short, brittle chips? The integrated MK5 chipbreaker on this trigon insert is intended to produce controlled, short chips in cast iron turning operations, reducing the need for manual chip handling. Is the trigon geometry suitable for heavy interruptions? Yes, the Trigon 80° form combined with a 1.6 mm corner radius delivers increased edge strength and resistance to chipping during interrupted cuts. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Markenzuschreibungen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Geschützte Markennamen und Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
WNMG100616-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from a robust combination of Tiger·tec Gold coating, the RP5 chipbreaker and a Trigon 80° geometry with a 1.6 mm corner radius for consistent, productive steel turning; order directly via Metav Werkzeuge or request application advice from the consultants. WNMG100616-RP5 WPP10G turning insert — Trigon 80°, Tiger·tec Gold, for steel — Walter Tools The WNMG100616-RP5 WPP10G is a trigon 80° turning insert designed for steel turning, combining a coated carbide grade from the Tiger·tec Gold family with an RP5 chipbreaker to ensure stable chip control in ISO P applications. Tiger·tec Gold coating for extended tool life Optimised for steel machining (ISO P) RP5 chipbreaker for stable chip formation Trigon 80° geometry with 1.6 mm corner radius Improved process reliability through advanced coating technology The combination of the Tiger·tec Gold coating and the WPP10G grade results in a noticeably higher resistance to abrasive wear and thermal loading compared with uncoated grades. This coating technology is engineered to reduce flank and crater wear under the thermal conditions typical of steel turning, which leads to longer tool life and fewer insert changes. As a consequence, cycle times become more predictable and machine uptime is increased. The textural and chemical design of the coating also supports consistent performance when cutting a broad range of steels, so maintenance intervals are easier to plan and productivity is improved. Predictable chip control and surface finish with RP5 The RP5 chipbreaker is shaped to break and evacuate chips reliably in a wide range of cutting conditions commonly encountered with steel (ISO P). By controlling chip formation, the insert reduces the risk of chip entanglement and secondary damage to the workpiece or fixture. The chipbreaker also contributes to a stable cutting force, which supports repeatable surface quality and dimensional accuracy. For operations where consistent finishes and reduced rework are priorities, this chip control design helps to secure repeatable results and lowers the cost per part through fewer rejects and less manual intervention. Robust geometry for secure clamping and extended performance A Trigon 80° form with a 1.6 mm corner radius provides a reliable cutting edge that resists chipping during interrupted cuts and heavy feed conditions. The insert’s 0° negative clearance contributes to a strong cutting edge and favourable edge stability, which is particularly beneficial when machining tougher steels or when heavier depths of cut are required. The triangular shape allows three indexable cutting edges per insert, improving cost-efficiency per edge and enabling quick index changes for minimal downtime. Together, geometry and material grade provide a balance between edge strength and cutting efficiency that suits general-purpose and demanding turning tasks. Contact Metav Werkzeuge for tailored application advice or to secure WNMG100616-RP5 WPP10G inserts from Walter Tools; reach the team via info@metav-werkzeuge.com or by phone at +49 2822 7131930 for prompt assistance Technical data Article number: WNMG100616-RP5-WPP10G-WALTER Designation: WNMG100616-RP5 WPP10G Manufacturer: Walter Tools Facts Geometry: Trigon 80° Corner radius: 1.6 mm Clearance angle: 0° (negative) Chipbreaker: RP5 Grade/Coating: WPP10G / Tiger·tec Gold Tolerance class: M Size code: 10 Plate thickness: 06 Special features Coated carbide grade WPP10G Intended application: steel (ISO P) Stable chip formation Robust cutting edge for interrupted cuts Three usable cutting edges per insert FAQ What materials is this insert suitable for? The WNMG100616-RP5 WPP10G insert from Walter Tools is specified for steel machining (ISO P) and is optimised for the typical thermal and chip formation behaviour of steels. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WPP10G grade reduces wear and improves thermal resistance, which leads to longer tool life and fewer insert changes in steel turning operations. Is the RP5 chipbreaker suitable for high-feed applications? Yes, the RP5 chipbreaker is designed to promote controlled chip breakage and evacuation across a range of feeds and depths of cut, supporting consistent surface quality in steel turning. How many cutting edges are available per insert? The trigon shape offers three indexable cutting edges per insert; the robust geometry with a 1.6 mm corner radius provides edge stability during heavier cuts. Can this insert be used for stainless steel or other alloys? The WNMG100616-RP5 WPP10G is specified for steel (ISO P); suitability for stainless or other alloy classes is not indicated and should be verified with an application test or consultation. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG100616-RP5 WPP20G RP5 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a robust RP5 chipbreaker and Trigon 80° geometry for efficient steel machining and reliable tool life; order the insert directly via Metav Werkzeuge or consult the team for application advice. WNMG100616-RP5 WPP20G turning insert — Tiger·tec Gold coated, Trigon 80° geometry (Walter Tools) The WNMG100616-RP5 WPP20G is a Trigon 80° turning insert designed for steel machining, delivering stable chip formation and high productivity in general turning applications Tiger·tec Gold coated cemented carbide Optimised for steel machining (ISO P) Trigon 80° geometry, 1.6 mm corner radius RP5 chipbreaker with 0° negative rake Maximise throughput with a coated grade built for steel The coated grade WPP20G is part of the Tiger·tec Gold family and combines a wear-resistant cemented carbide substrate with a tailored coating architecture to support high-process stability. This configuration promotes consistent cutting edge performance and reduces flank wear in typical steel turning operations. The RP5 chip control system aids in predictable chip formation, lowering the risk of built-up edge and contributing to uninterrupted production cycles. For manufacturers focused on process reliability, the combination of coating and chipbreaker provides a measurable benefit in repeatability and batch consistency. Geometry that balances strength and accessibility The Trigon 80° insert form and 1.6 mm corner radius offer a robust cutting edge for medium to heavy turning while still permitting access to common internal and external profiles. The 0° negative rake (negative cutting geometry) increases edge strength and is particularly suitable where interrupted cuts or tougher workpiece conditions occur. In practical terms, this means fewer edge failures and longer intervals between indexings, improving machine uptime. The insert designation and geometry make it a versatile option across turning tasks that require a compromise between durability and dimensional control. Practical advantages of the RP5 chipbreaker and grade choice The RP5 chipbreaker is engineered to produce short, controllable chips when machining steels classified under ISO P. This improves evacuation in through‑feed and general turning operations and reduces the chance of crank or coolant-line clogging. Choosing the WPP20G grade for steel applications ensures the coating and substrate pairing is optimised for the thermal and mechanical conditions typical of these materials; the result is reliable flank wear behaviour and a predictable tool life. For workshop planners, this translates into simplified tooling lists and fewer emergency tool changes, supporting smoother production flow. For precise selection or to discuss process parameters for Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored advice and fast supply — Metav Werkzeuge is available to assist with cutting data and compatibility recommendations Technical data SKU: WNMG100616-RP5-WPP20G-WALTER Designation: WNMG100616-RP5 Grade: WPP20G Series: Tiger·tec Gold Manufacturer: Walter Tools Facts Plate form: Trigon 80° Corner radius: 1.6 mm Plate size designation: 10 Thickness designation: 06 Chipbreaker: RP5 Rake angle: 0° (negative) Tolerance class: M Execution: G Special features Coating: Tiger·tec Gold (coated cemented carbide) Material application: Steel (ISO P) Stable chip formation Robust cutting edge for interrupted cuts FAQ What materials is this insert suitable for? The WNMG100616-RP5 WPP20G insert is formulated for machining steels classified under ISO P and is optimised for typical steel heat generation and chip formation. How does the RP5 chipbreaker improve machining? The RP5 chipbreaker on this insert promotes short, controllable chips in steel turning, improving chip evacuation and reducing the risk of chip-related interruptions. Is the negative rake suitable for interrupted cuts? Yes. The 0° negative rake increases edge strength, making this insert appropriate for interrupted cuts and tougher turning conditions where a robust edge is required. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating enhances wear resistance and supports stable cutting-edge behaviour, which often results in longer, more predictable tool life during steel machining. Can this insert be used for finishing operations? The insert’s geometry and corner radius provide a balance between strength and finish capability; it is suitable for general turning where a compromise of durability and surface quality is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Protected brand names and product denominations are mentioned exclusively for explanation and identification purposes. There is no affiliation between our company and the brands listed. The offered item is an original, factory-new product of the manufacturer.
WNMG100616-RP5 WPP30G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the WPP30G carbide grade for consistent performance and extended tool life; order directly via Metav Werkzeuge or consult the team for application advice. WNMG100616-RP5 WPP30G — Trigon 80° indexable turning insert for steel · Walter Tools The WNMG100616-RP5 WPP30G is an indexable turning insert in Trigon 80° form, engineered for reliable steel machining with a balanced mix of wear resistance and toughness. Tiger·tec Gold coating for long tool life WPP30G carbide grade for general steel machining RP5 chipbreaker for stable chip control Trigon 80° form with 1.6 mm corner radius Increased productivity through a hard-wearing coating The Tiger·tec Gold technology combines a wear-resistant coating with a tough substrate to deliver consistent performance during extended cutting cycles. As the insert is a coated carbide grade (WPP30G) designed specifically for steel applications, thermal stability and reduced flank wear translate into longer intervals between indexings and fewer tool changes. For production environments this means improved machine uptime and predictable component quality, particularly where repeatability under varying cutting conditions is essential. Secure cutting behaviour for stable surface quality The Trigon 80° geometry and the 1.6 mm corner radius provide a robust cutting edge that resists chipping during interrupted cuts and heavy cuts. The 0° negative rake enhances edge strength, while the RP5 chipbreaker actively shapes chip flow to prevent entanglement and assist coolant penetration. Together these features support a steady metal-removal rate and a reliable surface finish on a wide range of steel grades, reducing the need for rework and improving first-pass yield. Cost-efficient tool management and process reliability Specified tolerance class M and standardised insert dimensions simplify tool inventory and changeovers in mixed-production settings. The insert thickness designation 06 and the established WNMG footprint ensure compatibility with common toolholders, enabling rapid replacement and repeatable clamping. The combination of grade, chip control and geometry reduces total tooling cost per part through extended tool life and stable cutting conditions, supporting leaner tool logistics and more focused production planning. For technical guidance or to secure supplies of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored recommendations and ordering — info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: WNMG100616-RP5-WPP30G-WALTER Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger·tec Gold Grade: WPP30G Chipbreaker: RP5 Facts Corner radius: 1.6 mm Free cutting angle: 0° (negative) Insert shape: Trigon 80° Insert size: 10 Plate thickness designation: 06 Tolerance class: M Special features Coating: Tiger·tec Gold technology Substrate: Coated carbide (WPP30G) Material suitability: Steel (P) Design: Trigon 80° form, robust edge Chip control: RP5 chipbreaker Application focus: General steel machining, high process reliability FAQ Which materials is this insert suitable for? The WNMG100616-RP5 WPP30G insert is designed primarily for steel (ISO group P), with the WPP30G grade optimised for typical steel heat generation and chip formation. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP30G grade increases wear resistance and thermal stability, allowing the insert to maintain cutting performance and extend tool life under continuous steel machining. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on the WNMG100616-RP5 shapes chips for controlled evacuation, reducing risk of chip jamming and supporting consistent material removal and surface quality. Is the insert suitable for interrupted cuts or heavy roughing? Yes; the Trigon 80° geometry combined with a 0° negative rake and a 1.6 mm corner radius gives a strong cutting edge that withstands shocks from interrupted cuts and heavy engagement. What does tolerance class M mean for tool setup? Tolerance class M denotes standard manufacture precision, which supports predictable seating and repeatable clamping in common toolholders, simplifying setup and tool management. Manufacturer/Responsible: Walter Tools (Walter AG; Tübingen; Germany) Registered trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, factory-new goods of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com