WOEX120608-E57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of high process security, robust chip control, and the Tiger‑tec Silver coating for longer tool life and consistent production results; order the insert directly via Metav Werkzeuge or consult our technical advisors for application support. WOEX120608-E57 WKP35S drill/reaming indexable insert – Walter Tools, Tiger‑tec Silver, Trigon 80° The WOEX120608-E57 WKP35S is a trigon‑shaped indexable insert for drilling and reaming operations, optimised for machining steel and cast iron in industrial production environments. Tiger‑tec Silver coated carbide grade WKP35S Suitable for steel (P) and cast iron (K) machining Trigon 80° form with 0.8 mm corner radius Chipbreaker E57 for controlled chip formation Enhanced coating for extended performance and predictable wear The Tiger‑tec Silver coating and the WKP35S coated carbide composition provide a decisive improvement in wear resistance and thermal stability compared with uncoated grades. This results in a longer effective tool life under the thermal and mechanical loads typical of steel and cast iron machining. By combining a wear‑resistant surface layer with a substrate optimised for toughness, the insert maintains edge integrity during interrupted cuts and high chip‑load cycles. The net effect is reduced tool changes, fewer unexpected stoppages and a more predictable production rhythm — essential for lean manufacturing and uptime targets. Geometry designed for reliable chip control and surface quality The trigon 80° geometry and the integrated E57 chipbreaker ensure consistent chip formation and evacuation during drilling and boring operations. The 0.8 mm corner radius balances edge strength and finish quality: larger radii support edge life, while the trigon form gives stability in radial engagement. These geometry choices translate into measurable benefits — improved process security, reduced rework and better dimensional consistency for series production. For shops progressing from general‑purpose inserts, this geometry helps achieve tighter tolerances without extensive process re‑engineering. Application advantages and integration into production Intended for steels (ISO group P) and cast irons (ISO group K), the insert is suited to batch and continuous processes where repeatability and tool life are priorities. The coated grade and chipbreaker combination support operations at moderate to elevated cutting speeds with stable chip control, which helps maintain cycle times and reduce coolant dependency in many cases. When integrated into standard cutter bodies, the insert is straightforward to index and replace, allowing maintenance teams to keep downtimes short and documentation simple. For process planning, this means fewer tool variants to manage and more consistent throughput across machining centres. Contact Metav Werkzeuge for tailored process recommendations and to discuss suitable cutter bodies and parameters for Walter Tools inserts Technical data Article number: WOEX120608-E57-WKP35S-WALTER ISO designation: WOEX120608-E57 WKP35S Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Plate size: 12 Plate thickness: 06 Form angle: Trigon 80° Tolerance class: E Special features Coating: Tiger‑tec Silver Grade: WKP35S (coated carbide) Chipbreaker: E57 Material suitability: Steel (P), Cast iron (K) Execution: X FAQ What materials is this insert suitable for? The WOEX120608-E57 WKP35S insert is designed for steel (P) and cast iron (K) applications and is tuned for the chip characteristics and wear mechanisms typical of those material groups. How does the Tiger‑tec Silver coating affect performance? The Tiger‑tec Silver coating improves thermal and abrasive resistance, leading to longer tool life and more consistent cutting edge performance in the Walter Tools insert. What advantages does the Trigon 80° form provide in drilling applications? The Trigon 80° form delivers enhanced stability in radial engagement, supporting consistent chip control and dimensional accuracy during drilling and reaming operations. Is the chipbreaker suitable for interrupted cuts? Yes, the E57 chipbreaker is designed to promote short, controlled chips and supports reliable evacuation even under varying engagement conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and product names are the property of their respective owners and are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer.
WOEX120608-E57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, stable Trigon 80° geometry and controlled chip formation for reliable hole-making in demanding materials; order or request application advice via Metav Werkzeuge for fast integration into production. WOEX120608-E57 WSP45G Bohr-/Aufbohrwendeschneidplatte — rigid Trigon 80° geometry, Tiger·tec Gold coating (Walter Tools) WOEX120608-E57 WSP45G is an indexable insert designed for drilling and enlarging holes in industrial machining, offering a balance of wear resistance and edge stability for work on a broad range of materials Tiger·tec Gold PVD coating for extended tool life Trigon 80° geometry for rigid hole-making 0.8 mm corner radius for stable cutting edges Chipbreaker E57 for controlled swarf formation Consistent productivity when machining Stahl, rostfreier Stahl and superalloys The combination of the WSP45G grade with Tiger·tec Gold coating targets high process reliability when working with Stahl, rostfreier Stahl and high-temperature alloys. The coated cemented carbide formulation provides toughness and thermal resistance, reducing risk of build-up and flank wear under the thermal loads typical of hole-making. This results in fewer index changes, longer effective tool life and a reproducible hole quality that supports uninterrupted production runs. Robust coating and cutting-edge design reduce downtime A PVD-based Tiger·tec Gold finish protects the cutting edge against abrasive and adhesive wear while preserving toughness at the core. Paired with a 0.8 mm corner radius and the insert’s controlled rake, this geometry helps maintain a stable cutting edge under varying feed conditions. The result is improved edge retention and fewer unplanned changes, translating into measurable reductions in tool consumption and machine idle time for batch and continuous operations. Reliable hole quality through optimised geometry and chip control The Trigon 80° form creates a rigid support area and a positive engagement for drilling and enlarging, improving concentricity and roundness in through-holes and shoulders. Combined with the E57 chipbreaker, swarf is broken and evacuated predictably, lowering the risk of re-cutting or workpiece damage. For workshops upgrading hole-making processes, this geometry offers a straightforward path to consistent dimensional accuracy and surface quality with standard drilling set-ups. Practical benefits for workshop logistics and process security As an insert suited to both dedicated drilling heads and multi-function toolholders, the design simplifies inventory and tool-change planning. The product’s versatility across the P / M / S material groups means a single grade can cover a wider application spectrum, reducing the number of specialised inserts required. With its engineered balance of wear resistance and edge stability, the insert supports higher productivity rates and dependable cycle times in small-batch and serial production alike. Contact Metav Werkzeuge for tailored application advice on Walter Tools inserts and to ensure optimal integration into existing tool systems Technical data SKU: WOEX120608-E57-WSP45G-WALTER Designation: WOEX120608-E57 WSP45G Type: Bohr-/Aufbohrwendeschneidplatte Series: Tiger·tec Gold Grade: WSP45G Manufacturer: Walter Tools Facts Shape: Trigon 80° Chipbreaker: E57 Corner radius: 0.8 mm Size: 12 Thickness: 06 Tolerance class: E Special features Coating: Tiger·tec Gold (PVD) Material fit: P / M / S Execution: X Intended use: drilling and enlarging holes Brand characteristics: precision, edge stability, process security FAQ Is this insert suitable for drilling stainless materials? The insert is designed for the M material group and is well suited for rostfreier Stahl, offering a balance of toughness and wear resistance for reliable chip formation. What role does the Tiger·tec Gold coating play? The Tiger·tec Gold coating enhances wear resistance and thermal stability, improving edge life and allowing consistent performance in mixed-material production. Can the insert handle titanium and heat-resistant alloys? Yes — the S classification in the data indicates suitability for high-temperature alloys and titanium when appropriate cutting parameters are used. Which geometry benefits hole accuracy most? The Trigon 80° form provides rigidity and support at the cutting edge, contributing to reproducible hole geometry and concentricity in typical drilling operations. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Markennamen and protected product designations are mentioned for clarification only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
WOMX030204-B57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of a coated carbide grade and a geometry tuned for reliable chip control to maintain consistent cycle times and long tool life. Order directly via Metav Werkzeuge or contact our specialists for cutting-data recommendations. WOMX030204-B57 WKP35S drill/boring indexable insert, Tiger·tec Silver coating, Trigon 80° WOMX030204-B57 WKP35S is an indexable insert designed for drilling and bore-enlarging operations in steel and cast iron, offering a trigon-shaped cutting geometry for stable engagement. Tiger·tec Silver coated carbide grade WKP35S Optimised for steel and cast iron machining Trigon 80° form with 0.4 mm corner radius B57 chipbreaker for controlled chip formation Consistent machining through engineered grade and coating The WKP35S grade, part of the Tiger·tec Silver family, delivers a balance of wear resistance and toughness tailored for common steel and cast-iron applications. The coated carbide substrate reduces flank and crater wear under typical cutting temperatures, which translates into steadier tool life and fewer unscheduled index changes. This engineered combination supports predictable process behaviour and enables planners to calculate regrind or index schedules with greater confidence. Stable engagement and improved chip control for fewer interruptions A Trigon 80° insert geometry combined with the B57 chipbreaker promotes short, consistent chips when machining interrupted or continuous cuts in steels and cast irons. The 0.4 mm corner radius helps distribute cutting forces, reducing the risk of premature edge damage while improving surface finish. For production environments, these characteristics reduce machine downtime and help maintain cycle-time targets, making the insert a pragmatic choice where repeatability matters. Clear application scope and practical handling guidance This insert is dimensioned as size 03 with a plate thickness 02, suitable for a range of drill and boring tool bodies that accept this indexable format. It is specified for materials within ISO group P (steel) and K (cast iron), so programmers and set-up engineers can match feeds and speeds to the substrate type with reduced trial-and-error. When in doubt about insert seating or cutting parameters, request cutting-data sheets from Metav Werkzeuge to ensure optimal performance and longest possible life for the tool. For application advice or tailored cutting data for Walter Tools inserts, please contact Metav Werkzeuge—email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, expert assistance. Technical Data SKU: WOMX030204-B57-WKP35S-WALTER Article designation: WOMX030204-B57 WKP35S Product type: Bohr-/Aufbohrwendeschneidplatte Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP35S Facts Insert size: 03 Thickness: 02 Corner radius: 0.4 mm Shape: Trigon 80° Chipbreaker: B57 Tolerance class: M Special features Coated carbide grade WKP35S Execution: X Suitable for machining: Steel (P), Cast iron (K) Optimised for controlled chip formation and wear resistance FAQ Is this insert suitable for both drilling and bore-enlarging operations? Yes. The WOMX030204-B57 WKP35S insert is designed for drill and boring tool bodies and offers the geometry and chip control required for both drilling and bore-enlarging tasks. Which materials are recommended for this grade? The Tiger·tec Silver WKP35S grade is specified for ISO group P (steel) and K (cast iron), making it appropriate for a wide range of unalloyed and alloyed steels as well as cast components. What benefit does the Trigon 80° form provide? The Trigon 80° shape ensures stable engagement and good support in the tool pocket, reducing vibration and improving edge life during interrupted cuts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used for clarification only. There is no affiliation between Metav Werkzeuge and the manufacturers named. The offered item is an original, new product from the stated manufacturer.
WOMX030204-B57-WSP45G Wendeplatten - Walter Tools
WOMX030204-B57 WSP45G — Bohr-/Aufbohrwendeschneidplatte von Walter Tools Die WOMX030204-B57 WSP45G ist eine Bohr-/Aufbohrwendeschneidplatte mit Tiger·tec Gold Beschichtung für präzise und wirtschaftliche Bearbeitung von Stahl, rostfreiem Stahl und hitzebeständigen Legierungen. Tiger·tec Gold PVD-Beschichtung für hohe Standzeit Geeignet für Stahl, rostfreien Stahl und Superlegierungen Trigon 80° Plattenform für stabile Schneidkante Eckenradius 0,4 mm für präzise Schnittführung Spanbrecher B57 optimiert Spanbildung Langlebigkeit durch Beschichtung und Sorte Die Wendeschneidplatte kombiniert die WSP45G Schneidstoffsorte mit der Tiger·tec Gold Beschichtung, wodurch sich die Standzeit deutlich erhöht und das Werkzeug länger im produktiven Einsatz bleibt. Für Anwender bedeutet das weniger Stillstandzeit und reduzierte Werkzeugkosten pro gefertigte Einheit. Die PVD-Beschichtung sorgt zusätzlich für verbesserte Verschleißfestigkeit bei hoher thermischer Belastung. Präzision und zuverlässiges Spanmanagement beim Bohren Die Trigon 80° Plattenform und der Spanbrecher B57 liefern eine stabile Schneidkante und kontrollierte Spanbildung, was die Oberflächengüte und Maßhaltigkeit verbessert. Die Kombination aus Form und Spanformer reduziert Vibrationen und Aufbauschneiden, sodass Bohr- und Aufbohrprozesse reproduzierbare Ergebnisse und konstante Taktzeiten erzielen. Breites Einsatzspektrum und Zielgruppe Diese Wendeschneidplatte ist ausgelegt für die Bearbeitung von Stahl, rostfreiem Stahl und hitzebeständigen Superlegierungen und spricht damit besonders Anwender in der Komponentenfertigung, im Maschinenbau und in der Luftfahrtindustrie an. Kleine und mittlere Betriebe profitieren von der Vielseitigkeit, weil eine Sorte mehrere Werkstoffgruppen abdeckt und damit Werkzeugwechsel minimiert werden kann. Konkrete Vorteile in der Fertigungspraxis Die präzise Plattendicke und der Eckenradius 0,4 unterstützen eine planbare Werkzeugstandzeit und vereinfachen die Prozessauslegung. Durch die robuste Schneidstoffwahl entstehen weniger Bauteilstreuungen und die Nacharbeit reduziert sich. Gleichzeitig erlaubt die Sorte effiziente Schnittwerte, was die Produktivität erhöht und die Wirtschaftlichkeit pro Bauteil verbessert. Mit der Sorte WSP45G aus der Tiger·tec Gold Reihe von Walter Tools Produktionsprozesse sicherer und wirtschaftlicher gestalten — bei Fragen erreichen Sie uns unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: WOMX030204-B57-WSP45G-WALTER Marke: Walter Tools Serie: Tiger-tec Gold Bezeichnung: WOMX030204-B57 WSP45G Ausführung: X Plattenform: Trigon 80° Plattengröße: 03 Plattendicke: 02 Eckenradius: 0,4 Spanbrecher: B57 Toleranzklasse: M Fakten Plattengröße: 03 Plattendicke: 02 Eckenradius: 0,4 Besonderheiten Schneidstoffsorte: WSP45G Beschichtung: Tiger·tec Gold (PVD) Bearbeitbare Werkstoffe: Stahl, rostfreier Stahl, Superlegierungen und Titan Typ: Bohr-/Aufbohrwendeschneidplatte FAQ Für welche Werkstoffe ist die Wendeschneidplatte geeignet? Die WOMX030204-B57 WSP45G von Walter Tools ist konzipiert für Stahl, rostfreien Stahl sowie hitzebeständige Superlegierungen und Titan und deckt damit ein breites Bearbeitungsspektrum ab. Wie verbessert die Tiger·tec Gold Beschichtung die Leistung? Die Tiger·tec Gold PVD-Beschichtung erhöht die Verschleißfestigkeit und Standzeit der Schneidkante, wodurch die WSP45G bessere Prozesssicherheit und längere Intervalle zwischen Werkzeugwechseln bietet. Welchen Nutzen bringt der Spanbrecher B57 in der Praxis? Der Spanbrecher B57 sorgt für kontrollierte Spanbildung, reduziert Aufbauschneiden und verbessert die Oberflächengüte bei Bohr- und Aufbohroperationen. Ist die Wendeschneidplatte für Serienfertigung geeignet? Ja, durch die kombinierte Robustheit und Vielseitigkeit der WSP45G sowie die Tiger·tec Gold Beschichtung eignet sich die Platte besonders für Serienprozesse mit wiederholgenauen Ergebnissen. Welche Formfaktoren und Toleranzen sind relevant für die Einspannung? Die Platte kommt im Trigon 80° Format mit Toleranzklasse M und Eckenradius 0,4, was eine stabile Lage in handelsüblichen Werkzeughaltern ermöglicht. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WOMX030204-D57 WKP35S WKP35S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver wear resistance and the WKP35S grade’s suitability for steel and cast iron to maintain steady productivity; the Trigon 80° geometry and 0.4 mm corner radius ensure stable chip control and repeatable results. Order directly via Metav Werkzeuge or consult our specialists for application guidance. WOMX030204-D57 WKP35S drill/boring indexable insert, Trigon 80° – Walter Tools WOMX030204-D57 WKP35S is an indexable insert optimised for drilling and boring operations in steel and cast iron, combining a Tiger‑tec Silver coating with a geometry tuned for secure cutting and predictable tool life Tiger‑tec Silver coating for enhanced wear resistance WKP35S grade for steel and cast iron machining Trigon 80° shape for a stable cutting edge Corner radius 0.4 mm for controlled chip formation Longer tool life through material and coating synergy The WKP35S cutting grade, part of the Tiger‑tec Silver family, is a coated cemented carbide solution engineered for the heat and chip characteristics of steel and cast iron. The combination of coating technology and a tailored substrate reduces abrasive wear and extends time between index changes, which supports higher component throughput and lower tooling costs per part. For operations where consistent results and predictable tool life matter, this grade represents a rational choice that improves process stability. Geometry that secures the edge and improves chip control A Trigon 80° insert profile provides a robust cutting edge for axial engagement typical of drilling and boring. The modest corner radius of 0.4 mm contributes to a reliable transition between cutting edge and flank, reducing edge chipping under interrupted cuts. In addition, the chipbreaker D57 is designed to break and evacuate chips effectively in the intended material groups, helping to avoid re-cutting and improving surface quality. These geometric details translate into fewer interruptions and a steadier production rhythm. Designed for predictable mounting and repeatable accuracy The insert is produced to tolerance class M, with a plate size 03 and thickness code 02, ensuring consistent fit in holders designed for this insert family. Consistent seat geometry and dimensional control reduce clamping variances, so the same cutting data can be used across multiple tools with minimal readjustment. For workshop planners and production engineers, this means shorter setup times and a reduced risk of scrap due to misalignment or seating inconsistency. Practical application notes and compatibility guidance As a drill/boring indexable insert, the WOMX030204-D57 WKP35S is intended for toolholders that accept Trigon 80° inserts in size 03. The grade’s focus on steel (P) and cast iron (K) makes it suitable for general machining tasks in mixed-production environments. When selecting cutting parameters, consider the material group, tool engagement and coolant strategy; the combination of grade and geometry supports stable cutting at conventional and elevated cutting speeds in many common applications. For unusual alloys or specialised conditions, refer to process data sheets or consult technical advisors. Contact Metav Werkzeuge for tailored cutting data, holder compatibility checks and sample availability; Metav Werkzeuge delivers practical application support and prompt supply for Walter Tools inserts Technical data SKU: WOMX030204-D57-WKP35S-WALTER Designation: WOMX030204-D57 WKP35S Manufacturer: Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte Facts Insert shape: Trigon 80° Corner radius: 0.4 mm Plate size: 03 Thickness code: 02 Chipbreaker: D57 Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WKP35S (coated cemented carbide) Suitable for: Steel (P) and Cast iron (K) Execution: X Label: Bohr-/Aufbohrwendeschneidplatte FAQ What materials is this insert intended for? The WOMX030204-D57 WKP35S is specified for machining steel (P) and cast iron (K); the grade and coating are optimised for those material groups. What does the Trigon 80° shape mean for drilling and boring? The Trigon 80° profile gives a sturdy cutting edge and good edge stability for axial operations, improving resistance to edge chipping during penetration and interrupted cuts. How does the D57 chipbreaker affect machining? Chipbreaker D57 promotes controlled chip formation and evacuation in the intended materials, reducing the risk of recutting and supporting improved surface finish. What do the codes 03 and 02 refer to? Plate size 03 and thickness code 02 denote the insert’s dimensional family and thickness class, ensuring compatibility with holders designed for that insert series. Is the WKP35S a coated grade and what benefits does that provide? Yes, WKP35S is a coated cemented carbide grade within the Tiger‑tec Silver range; the coating enhances wear resistance and supports longer tool life under typical steel and cast iron cutting conditions. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
WOMX030204-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating and the robust PVD-coated carbide grade to achieve stable cutting edges and broad material coverage; the Trigon 80° geometry with a 0.4 mm corner radius supports secure engagement and improved chip control. Order the WOMX030204-D57 WSP45G directly via Metav Werkzeuge or consult their specialists for application support. WOMX030204-D57 WSP45G Drilling/Boring Indexable Insert, Trigon 80° – Walter Tools The WOMX030204-D57 WSP45G is a Trigon 80° indexable insert designed for drilling and bore-enlarging operations, optimised for steels, rostfreier Stahl and heat‑resistant superalloys Tiger·tec Gold PVD-coated carbide Trigon 80° geometry for stable engagement 0.4 mm corner radius for precise chip control Chipbreaker D57 for consistent chip formation Consistent performance from a modern coated grade The WSP45G cutting grade, part of the Tiger·tec Gold series, is a PVD-coated carbide composition engineered for demanding milling-derived holemaking tasks. The coating increases thermal resilience while the substrate maintains edge stability, which together reduce flank wear and extend tool life. Designed to tackle the ISO groups P/M/S, this insert offers a reliable balance between toughness and hardness, ensuring predictable wear behaviour when machining steels, rostfreier Stahl and heat‑resistant superalloys. Geometry that stabilises engagement and improves hole quality The Trigon 80° plate form provides a robust cutting edge and positive engagement in drilling and bore‑enlarging operations, while the 0.4 mm corner radius supports gradual load distribution at the insert corner. Combined with the chipbreaker D57, this geometry helps control chip formation and reduces the tendency for build‑up on the cutting edge, which results in more consistent hole dimensions and improved surface finish. The result is fewer reworks and a more stable process chain. Process security across a wide material range Engineered for versatility, this insert is suitable for cutting common steels, rostfreier Stahl and demanding superalloys or titanium alloys; the material designation P / M / S reflects that breadth. The coated carbide composition resists the thermal and mechanical stresses typical of these materials, enabling steady chip evacuation and reduced edge chipping. For customers seeking predictable throughput and fewer tool changes, this grade contributes to higher machine utilisation and consistent component quality. Practical integration and handling in production The insert is supplied in execution X with plate size 03 and plate thickness 02, tolerance class M, making it compatible with standard indexable tooling systems for drilling and boring heads that accept a Trigon 80° insert. Identification and stock management are simplified by the ISO designation WOMX030204‑D57 WSP45G, which aligns with common procurement and tool‑management systems. For technical queries or application matching, Metav Werkzeuge can provide cutting data guidance and compatibility checks to integrate the insert into existing toolsets. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts and secure the optimal insert selection for specific drilling and bore‑enlarging tasks Technical Data SKU: WOMX030204-D57-WSP45G-WALTER Designation: WOMX030204-D57 WSP45G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Core figures Plate size: 03 Plate thickness: 02 Corner radius: 0.4 mm Plate form: Trigon 80° Tolerance class: M Special features Coating: Tiger·tec Gold (PVD-coated carbide) Chipbreaker: D57 Material application: P / M / S (steel, rostfreier Stahl, superalloys/titan) Execution: X Application type: drilling and boring (hole enlargement) FAQ Which materials is this insert suited for? The WOMX030204‑D57 WSP45G from Walter Tools is specified for ISO groups P, M and S, meaning it is suitable for steels, rostfreier Stahl and heat‑resistant superalloys or titanium. How does the Trigon 80° form affect drilling performance? The Trigon 80° geometry gives a robust cutting edge and positive engagement for drilling and bore‑enlarging, improving stability and contributing to consistent hole quality with the WOMX030204‑D57 WSP45G. What benefits does the Tiger·tec Gold coating provide? Tiger·tec Gold PVD coating on the WSP45G grade increases thermal resistance and reduces flank wear, supporting longer tool life and reliable performance in higher cutting temperatures. How does the 0.4 mm corner radius influence results? A 0.4 mm corner radius reduces edge stress and assists chip formation control, which helps maintain dimensional stability and surface finish during holemaking with this insert. Is this insert compatible with standard drilling/boring holders? Yes; the ISO designation and execution X, together with plate size 03 and thickness 02, match common indexable holders designed for Trigon 80° inserts such as the WOMX030204‑D57 WSP45G. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is among the world's leading manufacturers of precision tools for metalworking and forms part of the Swedish Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The item offered is original and brand‑new from the manufacturer.
WOMX040304-B57 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of a wear-resistant Tiger‑tec Silver grade, a robust Trigon 80° geometry and precise chip control for reliable drilling and reaming operations; order the insert directly via Metav Werkzeuge or consult our specialists for application matching. WOMX040304-B57 WKP35S Drilling/Boring Indexable Insert — Tiger‑tec Silver, for Steel & Cast Iron — Walter Tools A WOMX040304-B57 WKP35S drilling/boring indexable insert designed for metalcutting in steel and cast iron, offering strong edge stability and consistent chip formation for production and jobbing environments Tiger‑tec Silver coated grade WKP35S Trigon 80° insert form for axial stability Optimised B57 chipbreaker for controlled chips Corner radius 0.4 mm for edge strength Consistent wear resistance for higher uptime The Tiger‑tec Silver coating combined with the WKP35S substrate provides a balanced resistance to abrasive wear while maintaining a sharp cutting edge. Coated carbide (described here as a hardmetal substrate with a multilayer surface treatment) helps to reduce flank wear and extend tool life under the thermal and mechanical loads typical of drilling and boring. This results in fewer tool changes, more predictable tool life and improved process stability in mixed production runs. Geometry engineered to secure clamping and improve surface finish The Trigon 80° form and the 0.4 mm corner radius deliver a compromise between cutting-edge strength and accessible cutting action, reducing the risk of chipping during entry and exit. The B57 chipbreaker promotes dependable chip segmentation, which simplifies evacuation and reduces the likelihood of re-cutting. Together, these features support consistent hole quality and lower secondary finishing needs, making the insert well suited to both series manufacturing and single-part production where repeatability matters. Broad applicability across steel and cast iron with reliable tolerances Designed for materials in ISO groups P (steel) and K (cast iron), this insert meets the demands of typical machining operations for these groups, from unalloyed to alloyed steels and grey or spheroidal cast irons. The stated tolerance class M ensures compatibility with precision toolholders and predictable positional fit. Use of this geometry and grade can improve throughput by maintaining cutting performance across varying batch sizes and material lots, while helping to deliver the surface integrity required for downstream processes. Contact Metav Werkzeuge for tailored application advice and to arrange supply or a technical consultation based on Walter Tools' Tiger‑tec Silver WKP35S inserts Technical data Article number: WOMX040304-B57-WKP35S-WALTER Designation: WOMX040304-B57 WKP35S Product type: Drilling/boring indexable insert Brand: Walter Tools Facts Size: 04 Thickness: 03 Insert form: Trigon 80° Corner radius: 0.4 mm Chipbreaker: B57 Tolerance class: M Materials & features Grade: WKP35S Coating/series: Tiger·tec Silver (coated carbide) Applicable material groups: Steel (P), Cast iron (K) Execution: X FAQ What materials is this insert suitable for? The insert is intended for machining steel and cast iron; the WKP35S grade in the Tiger‑tec Silver series is optimised for ISO groups P and K and provides good wear resistance for these materials. How does the Trigon 80° form affect performance? The Trigon 80° geometry increases axial stability and edge strength, helping to reduce chipping during drilling and reaming while supporting a predictable surface finish. What does the B57 chipbreaker deliver in practice? The B57 chipbreaker promotes controlled chip segmentation for reliable evacuation and reduced risk of recutting, which improves process reliability in through‑hole and blind‑hole operations. Is the tolerance class important for my toolholder selection? Yes — the tolerance class M ensures consistent fit in standard toolholders and contributes to repeatable positioning and secure clamping during machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are used solely for descriptive purposes; there is no affiliation between our company and the brands mentioned. The offered article is an original, brand‑new product from the manufacturer.
WOMX040304-B57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a robust WSP45G grade and the Trigon 80° form for consistent hole-making performance and extended tool life; order the insert directly via Metav Werkzeuge or consult the team for application support. WOMX040304-B57 WSP45G drilling/reaming indexable insert by Walter Tools — Tiger‑tec Gold, Trigon 80° WOMX040304-B57 WSP45G is a coated carbide indexable insert designed for drilling and enlarging holes, offering a balanced combination of edge stability and versatility across demanding alloys. Tiger‑tec Gold PVD coating for edge stability Trigon 80° insert form for radial stability Suitable for steel, stainless and superalloys Corner radius 0.4 mm for controlled chip formation Consistent performance through a modern coated grade The WSP45G grade, part of the Tiger‑tec Gold family, is a PVD‑coated cemented carbide designed for versatile milling and hole-making tasks. The coating and substrate combine to resist thermal softening and wear during interrupted cuts, which translates into longer tool life and fewer index changes. For production environments this means improved machine uptime and more predictable consumable costs, as the cutting edge maintains performance under typical heat and load cycles encountered when machining steels and heat‑resistant alloys. Reliable chip control and improved surface quality The Trigon 80° geometry and the chipbreaker B57 are tailored to stabilise chip formation during bore enlargement and finishing passes. The modest corner radius 0.4 mm supports a controlled cutting edge that reduces the tendency for built‑up edge and improves surface finish. Controlled chip flow lowers the risk of entanglement in deep holes and contributes to safer chip evacuation, reducing rework and minimising cycle‑time variability in series production. Designed for integration and repeatable results With tolerance class M, insert designation 04 and thickness code 03, this insert fits standard indexable toolholders for hole‑making operations. The combination of form, grade and chip control offers straightforward integration into existing tool cycles, enabling repeatable bore quality and dimensional stability. Backed by the reputation of Walter Tools, the insert supports process reliability and predictable tool management in mixed‑material shops handling steel, stainless steel and nickel‑base alloys. For production teams seeking durable, versatile hole‑making inserts, contact Metav Werkzeuge for availability and application advice on Walter Tools Tiger‑tec Gold inserts — eMail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: WOMX040304-B57-WSP45G-WALTER SKU: WOMX040304-B57-WSP45G-WALTER Designation: WOMX040304-B57 WSP45G Series: Tiger‑tec Gold Grade: WSP45G Manufacturer: Walter Tools Type: drilling/reaming indexable insert Geometry: Trigon 80° Chipbreaker: B57 Tolerance class: M Execution: X Material applicability: P / M / S Facts Corner radius: 0.4 mm Insert size: 04 Thickness designation: 03 Coating: PVD (Tiger‑tec Gold) Applicable material groups: Steel (P), Stainless steel (M), Superalloys/Titanium (S) Special features Coated cemented carbide grade Robust cutting edge for interrupted cuts Suitable for demanding hole‑making and finishing passes Series designed for good chip control and surface quality FAQ What materials can this insert machine effectively? The WOMX040304-B57 WSP45G insert is specified for machining steel, stainless steel and heat‑resistant superalloys, reflecting its P / M / S applicability. What benefits does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WSP45G grade increases thermal resistance and wear protection, resulting in longer edge life and more consistent performance in hole‑making operations. How does the Trigon 80° form affect hole-making? The Trigon 80° geometry gives radial stability and supports accurate bore guidance, helping to maintain concentricity and improve surface finish during reaming and enlarging passes. Is the insert compatible with standard indexable holders? Yes, the insert designation and thickness (04, 03) conform to common indexable insert standards and are intended for use in compatible drilling/boring toolholders. What role does the chipbreaker B57 play? The B57 chipbreaker promotes controlled chip segmentation and evacuation, reducing built‑up edge and improving process reliability, particularly in interrupted or deep-hole cutting. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is original, factory‑new goods from the manufacturer (Walter Tools).
WOMX040304-D57 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKP35S grade for consistent, long-lasting cutting performance in steel and cast iron applications; the trigon 80° geometry with a 0.4 mm corner radius and D57 chipbreaker ensures stable engagement and improved chip control. Order directly via Metav Werkzeuge or consult the experts for application-specific advice. WOMX040304-D57 WKP35S — indexable drill/boring insert, Tiger·tec Silver, Steel & Cast iron — Walter Tools The WOMX040304-D57 WKP35S is a trigon 80° indexable insert designed for drilling and bore-enlargement operations in steel and cast iron, combining a coated carbide grade with a dedicated chipbreaker for controlled chip formation. Tiger·tec Silver coated grade WKP35S Trigon 80° geometry for stable engagement Chipbreaker D57 for controlled chip formation Suitable for steel and cast iron machining Consistent cutting performance for steel and cast iron The Tiger·tec Silver coating combined with the WKP35S grade provides a balance of wear resistance and thermal stability that is particularly effective when machining both steel (P) and cast iron (K). The coating reduces abrasive wear and supports a stable cutting edge under elevated temperatures, which results in longer tool life and fewer tool changes. This leads to measurable improvements in process reliability and predictable component quality in series production. Geometry that reduces vibration and improves hole quality The Trigon 80° profile and the 0.4 mm corner radius are engineered to enhance insert seating and distribution of cutting forces during drilling and bore enlargement. The D57 chipbreaker promotes short, controllable chips in typical steel and cast iron chips, reducing the risk of clogging and facilitating safe chip evacuation. As a result, surface finish is improved and rework is minimised, supporting efficient downstream processes and consistent hole tolerances. Productivity benefits and application guidance Designed as part of the Tiger·tec Silver series, this insert supports stable cutting parameters and repeatable performance, which can shorten cycle times and reduce overall machining costs. The insert’s specifications, such as insert size 04 and plate thickness 03, allow straightforward integration into compatible toolholders from Walter Tools. If further application data or cutting parameters are required for specific workpiece alloys or hole geometries, Metav Werkzeuge provides technical consultation via email and phone to assist in optimising process settings and tool selection. Contact Metav Werkzeuge for individual application advice and to request availability of Walter Tools inserts with Tiger·tec Silver WKP35S Technical Data Article number: WOMX040304-D57-WKP35S-WALTER Designation: WOMX040304-D57 WKP35S Product type: Bohr-/Aufbohrwendeschneidplatte Series: Tiger-tec Silver Manufacturer: Walter Tools Facts Insert size: 04 Plate thickness: 03 Corner radius: 0.4 mm Shape: Trigon 80° Chipbreaker: D57 Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKP35S (coated carbide) Suitable for: Steel (P) and cast iron (K) FAQ What materials is this insert suitable for? The insert is suitable for machining steel and cast iron; the WKP35S grade and Tiger·tec Silver coating are tuned for P and K workpiece groups. How does the D57 chipbreaker affect cutting? The D57 chipbreaker produces controlled, short chips in typical drilling and boring operations, which improves chip evacuation and reduces risk of chip-related interruptions. What does the Trigon 80° shape improve? The Trigon 80° geometry enhances insert seating and cutting-edge stability during drilling and bore-enlargement, contributing to better hole quality and reduced vibration. Can the insert be used for high-temperature cuts? The Tiger·tec Silver coating increases thermal stability and wear resistance, making the insert more resilient under elevated cutting temperatures common in steel machining. Is this insert compatible with standard Walter toolholders? The geometry and designation align with Walter Tools’ systems; compatibility should be verified against the specific toolholder catalogue or confirmed with Metav Werkzeuge. How is the corner radius specified and why does it matter? The corner radius is 0.4 mm, which influences edge strength and surface finish; a correctly chosen radius balances cutting force and tool life for the application. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
WOMX040304-D57 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold PVD coating, Trigon 80° geometry and reliable chip control for consistent machining of steel, stainless steel and high‑temperature alloys — order the WOMX040304‑D57 WSP45G insert directly via Metav Werkzeuge or contact our consultants for application advice. WOMX040304-D57 WSP45G Trigon 80° indexable insert, Tiger·tec Gold coating by Walter Tools (for steel, stainless steel and superalloys) A WOMX040304-D57 WSP45G indexable insert designed for demanding drilling and boring tasks, delivering stable cutting edges and dependable chip formation across a wide range of materials Tiger·tec Gold PVD coating for extended tool life Trigon 80° geometry for stable drilling and boring Compatible with steel, stainless steel and superalloys Corner radius 0.4 mm for defined cutting edge Consistent results for demanding materials The insert is engineered for reliable performance on steel, stainless steel and superalloys/titanium, thanks to the WSP45G grade and its Tiger·tec Gold coating. This combination supports stable cutting-edge behaviour under elevated temperatures and challenging chip formation tendencies typical of these materials. The design reduces the risk of built-up edge and promotes predictable wear patterns, which translates into fewer reworks and a more consistent component quality in series production. Geometry tuned for stable chip control and accuracy The Trigon 80° shape and the integrated D57 chipbreaker offer controlled chip formation during drilling and boring operations. The insert’s corner radius 0.4 mm promotes precise engagement and repeatable cutting performance, reducing vibration and improving hole quality. For toolrooms and production lines where dimensional consistency matters, this geometry helps to maintain tolerances and surface finish while keeping process forces manageable. Coating and grade that extend productivity The PVD-based Tiger·tec Gold surface treatment provides a hard, wear‑resistant layer that enhances thermal stability and abrasion resistance. Combined with the WSP45G substrate, the coating supports extended component life and sustained cutting performance. The result is reduced tool change frequency and higher machine uptime — a clear rational advantage for operations seeking predictable throughput and lower machining overhead. Practical application and process benefits Specified as an insert for drilling/boring operations, the component is available in size 04 with thickness 03, and an execution code X to match established tool holders. The insert’s tolerance class M ensures a consistent fit and secure seating, aiding repeatable set‑ups and faster tool changes. When integrated into an optimised tool system, the insert contributes to efficient cycle times and reliable part output, making it suitable for both small‑batch engineering and larger production runs. For precise tool selection or machining recommendations with Walter Tools Tiger·tec Gold inserts contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: WOMX040304-D57-WSP45G-WALTER Designation: WOMX040304-D57 WSP45G Product type: Drilling/boring indexable insert Manufacturer: Walter Tools Facts Shape: Trigon 80° Size: 04 Thickness: 03 Corner radius: 0.4 mm Chipbreaker: D57 Grade: WSP45G Series: Tiger·tec Gold Tolerance class: M Execution: X Special features Coating technology: Tiger·tec Gold (PVD) Material compatibility: steel (P), stainless steel (M), superalloys/titanium (S) Robust chip control for drilling and boring Designed for stable cutting edge and extended tool life FAQ What materials is this insert suitable for? The WOMX040304‑D57 WSP45G insert from Walter Tools is suitable for steel, stainless steel and heat‑resistant superalloys including titanium, as indicated by its P/M/S designation. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold PVD coating on the WSP45G grade increases thermal and wear resistance, which helps to extend tool life and maintain consistent performance in series machining. What does the Trigon 80° geometry provide? Trigon 80° geometry improves entry rigidity and stability during drilling and boring, aiding dimensional accuracy and consistent chip evacuation when using the WOMX040304‑D57 insert. Is the corner radius important for finish? Yes — the 0.4 mm corner radius on this insert provides a defined cutting edge that contributes to improved surface finish and repeatable hole quality. Can this insert be used in existing toolholders? The insert follows common ISO-style designation and size conventions (size 04, thickness 03), making it compatible with corresponding toolholders designed for Trigon 80° inserts. The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Mention of brand names serves explanatory purposes only and does not imply any affiliation between our company and those manufacturers. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
WOMX05T304-B57 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WKP35S grade and a Trigon 80° geometry for stable, repeatable drilling and bore-enlargement operations; order directly via Metav Werkzeuge or consult the technical team for application advice. WOMX05T304-B57 WKP35S Drilling/Bore-Enlargement Indexable Insert – Walter Tools, Tiger·tec Silver WOMX05T304-B57 WKP35S is an indexable insert designed for drilling and bore-enlargement applications in steel and cast iron, offering a coated carbide grade for reliable chip control and extended tool life Tiger·tec Silver coating for long tool life WKP35S grade for robust, repeatable machining Trigon 80° geometry for secure seat and stability Suitable for steel and cast iron machining Extended tool life and consistent machining performance The combination of the Tiger·tec Silver coating and the WKP35S grade delivers a measurable increase in wear resistance and thermal stability during drilling and reaming cycles. The coated carbide chemistry is tailored to the heat and abrasion typical of machining steels and cast irons, which reduces flank wear and extends interval lengths between index changes. As a result, process stability improves and unplanned downtime is reduced, supporting continuous production runs with predictable outcomes. Geometry that improves stability and surface quality The Trigon 80° insert form with a 0.4 mm corner radius and the B57 chipbreaker are configured to enhance seating rigidity and chip formation control in bore-enlargement operations. The 80° geometry provides a firm clamping interface in standard holders, while the moderate corner radius balances edge strength with achievable surface finish. Controlled chip shaping from the B57 chipformer reduces the risk of built-up edge and helps maintain a consistent bore diameter and surface integrity in a single-pass or multi-pass process. Clear material coverage and application benefits Certified for ISO material groups P (steel) and K (cast iron), the insert is suitable where a single grade must cover common workshop and production needs. The designation indicates suitability for unalloyed and alloyed steels as well as abrasive cast irons; this reduces inventory complexity by using one insert type across several parts families. The technical specification supports machining strategies that favour efficiency and repeatability, translating material compatibility into fewer tool changeovers and improved throughput. Practical handling and shop-floor advantages Marked as WOMX05T304-B57 WKP35S, the insert is supplied in a standard trigon shape with thickness T3 and size 05, which eases replacement and keeps holder interfaces standardised. The combination of grade, coating and chipbreaker is intended to lower overall tooling costs through longer edge life and reliable chip behaviour. For application-specific recommendations or confirmation of holder compatibility, the Metav Werkzeuge technical team can provide measured advice and concise data for integration into existing toolsets. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver inserts and to request precise application data or ordering information Technical data SKU: WOMX05T304-B57-WKP35S-WALTER Designation: WOMX05T304-B57 WKP35S Product type: Drilling/Bore-enlargement indexable insert Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Corner radius: 0.4 mm Insert form: Trigon 80° Insert size: 05 Thickness: T3 Tolerance class: M Chipbreaker: B57 Execution: X Materials & features Grade: WKP35S Coating/technology: Tiger·tec Silver Machinable materials: Steel (P), Cast iron (K) Plate shape: Trigon Designation without grade: WOMX05T304-B57 UID: WOMX05T304-B57-WKP35S-WALTER FAQ What materials is this insert suitable for? The insert is suitable for machining steel and cast iron as indicated by its ISO classification P and K; the WKP35S grade and Tiger·tec Silver coating provide wear resistance for these material groups. How does the Trigon 80° geometry affect performance? The Trigon 80° form increases seating stability and enables secure clamping in common holders, contributing to repeatable bore sizes and reduced vibration during drilling and reaming operations. What role does the B57 chipbreaker play? The B57 chipbreaker shapes and controls chips during cutting, improving evacuation and reducing the risk of chip entanglement; this promotes consistent surface finish and edge longevity with the WKP35S grade. Is the insert compatible with standard indexable insert holders? The insert follows common trigon dimensions (size 05, thickness T3) and is intended for use in holders designed for WOMX-style trigon inserts; confirm holder compatibility with tooling documentation or supplier specifications. How is the product identified for reordering? Order by the SKU WOMX05T304-B57-WKP35S-WALTER or the designation WOMX05T304-B57 WKP35S to ensure the correct Tiger·tec Silver grade and chipbreaker configuration are supplied. Protected trademarks and product names are the property of their respective owners. Brand names and protected designations are mentioned for explanation only. There is no connection between our company and the named brands. The offered item is an original, brand-new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
WOMX05T304-B57 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of high process stability, versatile material capability and the Tiger·tec Gold coating for consistent performance in drilling and reaming operations; order the WOMX05T304-B57 WSP45G directly via Metav Werkzeuge or consult our technical team for application advice. WOMX05T304-B57 WSP45G Drill/Reaming Indexable Insert — Trigon 80°, Tiger·tec Gold (Walter Tools) The WOMX05T304-B57 WSP45G is a Trigon 80° indexable insert engineered for drilling and reaming tasks across a broad range of materials, providing reliable chip control and stable cutting edges for production environments Tiger·tec Gold PVD coating for extended tool life Trigon 80° geometry for stable drilling and reaming Suitable for Stahl, rostfreier Stahl and superalloys Chipbreaker B57 for controlled chip formation High productivity through proven coating and grade The insert’s Tiger·tec Gold coating and the WSP45G grade combine to deliver elevated wear resistance and consistent edge stability under industrial cutting conditions. This PVD-coated carbide grade is tailored to reduce flank wear and preserve cutting geometry, which translates into longer tool life and fewer index changes. For production lines where throughput and repeatable part quality matter, the coated grade supports higher cutting volumes and reduces downtime for tool exchange. Geometry that supports secure chip evacuation and hole quality Featuring a Trigon 80° form with a defined 0.4 mm corner radius, the insert provides a robust cutting edge that resists chipping while promoting smooth chip formation. The B57 chipbreaker is optimised for the insert’s intended applications, ensuring controllable chip flow during drilling and reaming cycles. These design choices contribute directly to improved surface finish and dimensional accuracy of bores, making the insert suitable for demanding holemaking in both short- and medium-run production. Versatility across materials and machining scenarios Designed for machining groups P / M / S, the insert is suitable for a wide spectrum of workpiece materials: Stahl (P), rostfreier Stahl (M) and heat-resistant superalloys or titanium (S). The grade’s balance of toughness and wear resistance supports stable cutting in materials that generate high temperatures or tend to form built-up edge. Explaining briefly: P denotes general steels, M denotes stainless and tough-to-machine steels, and S denotes superalloys and titanium — the grade’s chemistry and coating are selected to handle these challenges without frequent interruptions. Practical benefits for workshop and production planning With a compact T3 thickness and the practical WOMX05T304-B57 designation, the insert fits standard toolholder systems designed for Trigon inserts, enabling straightforward integration into existing drilling and reaming tool assemblies. The M tolerance class ensures consistent geometry from insert to insert, supporting predictable part quality and easier process parameter optimisation. Overall, the combination of geometry, chip control and coating reduces setup adjustments and simplifies tool inventory management. Contact Metav Werkzeuge today to discuss the WOMX05T304-B57 WSP45G for specific machining tasks or to request detailed cutting data tailored to the application Technical data SKU: WOMX05T304-B57-WSP45G-WALTER Article designation: WOMX05T304-B57 WSP45G Manufacturer: Walter Tools Facts Insert form: Trigon 80° Corner radius: 0.4 mm Plate size: 05 Plate thickness: T3 Tolerance class: M Special features Series / coating: Tiger·tec Gold (PVD) Grade: WSP45G (coated carbide) Chipbreaker: B57 Execution: X Applicable materials: P / M / S (Stahl, rostfreier Stahl, superalloys) FAQ What materials can this insert machine effectively? The WOMX05T304-B57 WSP45G is designed for machining Stahl, rostfreier Stahl and heat-resistant superalloys (groups P / M / S) and offers a balance of toughness and wear resistance for these materials. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold on the WSP45G grade enhances wear resistance and thermal stability, extending tool life and maintaining cutting-edge integrity during extended drilling and reaming cycles. What advantages does the Trigon 80° geometry provide for holemaking? The Trigon 80° geometry delivers a strong cutting edge and stable engagement in the bore, which helps to secure chip control and achieve consistent hole quality when using the WOMX05T304-B57 insert. Is the insert compatible with standard toolholders? Yes, the WOMX05T304-B57 designation and T3 thickness correspond to common Trigon toolholder systems for drilling and reaming, facilitating integration into existing tooling setups. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
WOMX05T304-D57 WAK15 Wendeplatten - Walter Tools
Benefiting from a combination of precise geometry and an aluminium-optimised carbide grade, the insert delivers reliable chip control and predictable tool life for non-ferrous machining. Order the WOMX05T304-D57 WAK15 directly via Metav Werkzeuge or request application advice from the technical consultants. WOMX05T304-D57 WAK15 drilling/boring indexable insert — Trigon 80°, uncoated carbide, Walter Tools The WOMX05T304-D57 WAK15 is a drilling and boring indexable insert designed for machining aluminium and other non‑ferrous metals, offering stable seating in trigon toolholders and a finely honed cutting geometry for reduced material adhesion. Uncoated carbide grade WAK15 for aluminium Trigon 80° form for secure seating 0.4 mm corner radius for accurate edges Chipbreaker D57 for improved swarf control High-efficiency performance for non‑ferrous machining The combination of the WAK15 uncoated carbide and a purpose‑designed chipbreaker ensures efficient material removal when working with aluminium and related alloys. The insert’s geometry reduces built‑up edge and sticking, which translates into fewer interruptions for edge cleaning and steadier cycle times. As an indexable option within the Walter N‑Sortensystem, it supports quick index changes and consistent results across repetitive bore‑making operations, helping to maintain throughput on production lines. Geometry that supports precision and stability A Trigon 80° plate form together with a 0.4 mm corner radius provides the rigidity and repeatability required for accurate hole profiles and edge condition. The trigon form ensures positive seating in compatible toolholders, while the small radius balances sharp cutting action with edge strength, offering a compromise between surface finish and tool durability. This geometry is particularly suited to applications where consistent hole quality and minimal post‑process finishing are priorities. Practical advantages in workshop integration The insert’s chipbreaker D57 is optimised for non‑ferrous swarf shapes, improving evacuation and reducing recutting of chips. Its T3 plate thickness contributes to stable clamping and reduced vibration in many standard drilling and boring setups. Delivered to industry tolerances (class M), the insert fits established holder systems with minimal set‑up time, aiding predictable tool cycles and efficient changeover routines in manufacturing environments. Application clarity and material suitability Classified for group N materials, the design and cutting properties of this indexable plate make it suitable primarily for aluminium and similar non‑ferrous metals such as messing and copper alloys. The uncoated cemented carbide composition supports sharp edges that perform well in low‑to‑moderate cutting temperatures typical of these materials, and helps to avoid excessive adhesion that can degrade surface quality or dimensional stability. Contact Metav Werkzeuge for tailored application advice or to arrange supply of Walter Tools drilling/boring indexable inserts (WOMX05T304-D57 WAK15) for aluminium machining Technical data SKU: WOMX05T304-D57-WAK15-WALTER Article designation: WOMX05T304-D57 WAK15 Manufacturer: Walter Tools Core specifications Plate form: Trigon 80° Corner radius: 0.4 mm Plate size: 05 Thickness: T3 Tolerance class: M Features / Applications Chipbreaker: D57 Grade: WAK15 (uncoated cemented carbide) Series: Walter N‑Sortensystem Application: Suitable for aluminium and non‑ferrous metals FAQ What materials is this insert suitable for? The WOMX05T304-D57 WAK15 insert from Walter Tools is intended for aluminium and other non‑ferrous metals, with cutting geometry and grade optimised for group N materials. Is the insert coated or uncoated? This indexable plate is supplied as uncoated cemented carbide in the WAK15 grade, delivering sharp cutting edges suited to low‑adhesion machining of aluminium. How does the Trigon 80° form affect toolholding? The Trigon 80° shape provides secure, repeatable seating in compatible toolholders, improving stability during drilling and boring operations and aiding consistent hole quality. What benefit does the 0.4 mm corner radius provide? A 0.4 mm radius balances edge sharpness and strength, producing accurate edges and a favourable surface condition while reducing the risk of premature chipping on non‑ferrous workpieces. Can the insert be used in the Walter N‑Sortensystem? Yes, the WOMX05T304-D57 WAK15 is part of the Walter N‑Sortensystem and is compatible with holders and assemblies designed for that series. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned solely for explanation. There is no affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, brand‑new product of the manufacturer Walter Tools.
WOMX05T304-D57 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of high process security, wear-resistant coating and precise Trigon geometry for consistent results in steel and cast iron machining; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. WOMX05T304-D57 WKP35S — Drilling/Reaming Indexable Insert, Tiger‑tec Silver, for Steel & Cast Iron | Walter Tools WOMX05T304-D57 WKP35S is a drilling/reaming indexable insert designed for productive metalcutting of steel and cast iron, offering a Trigon 80° form and a coated carbide grade for stable chip formation and long tool life Trigon 80° insert geometry for stable cutting Tiger‑tec Silver coated for extended wear resistance Optimised chipbreaker D57 for reliable chip control Designed for steel and cast iron machining High productivity through proven geometry and material The Trigon 80° insert geometry offers a robust cutting edge that reduces axial forces and supports consistent hole quality in demanding applications. Combined with the coated carbide grade WKP35S, the design enables controlled chip formation and repeatable performance during drilling and enlargement operations. This results in fewer tool changes and higher uptime on production machines, increasing throughput without compromising dimensional accuracy. Coating technology that extends tool life and process reliability The Tiger‑tec Silver coating and the WKP35S substrate form a system optimised for abrasive loads and the thermal conditions typical of steel and cast iron machining. The coating minimises flank and crater wear while maintaining a stable cutting edge, so insert life is extended and process windows are broader. Such wear resistance supports longer uninterrupted cycles and predictable maintenance intervals, which are critical for efficient workshop planning and cost control. Controlled chips and cleaner holes with the D57 chipbreaker The D57 chipbreaker is engineered for predictable chip segmentation when machining both P and K workpiece groups. Short, controlled chips reduce the risk of entanglement in the hole and improve surface finish during through‑hole and peck drilling sequences. The insert’s cutting edge and chip control features make swarf evacuation more efficient, lowering the likelihood of rework and contributing to a safer, cleaner production environment. Versatile application range and easy integration into existing tooling Marked for the ISO groups P and K, this indexable insert is suitable for a wide range of unalloyed and alloyed steel and cast iron workpieces. The standardised form and size ensure straightforward integration into common drill and boring heads that accept Trigon‑style inserts. Technical setup is simplified by the insert’s defined seating and repeatable geometry, enabling reliable process replication across multiple machines and operators. Contact Metav Werkzeuge for tailored application support and rapid supply of WOMX05T304-D57 WKP35S inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for specific recommendations Technical data Article number: WOMX05T304-D57-WKP35S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte WOMX05T304-D57 WKP35S Walter Tools SKU: WOMX05T304-D57-WKP35S-WALTER Manufacturer: Walter Tools Facts Corner radius: 0.4 Plate form: Trigon 80° Plate size: 05 Plate thickness: T3 Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WKP35S (coated carbide) Chipbreaker: D57 Material suitability: P (steel), K (cast iron) Execution: X FAQ What materials is this insert suitable for? The WOMX05T304-D57 WKP35S insert is specified for ISO groups P and K, meaning it is suited to machining a broad range of steel grades and cast iron components. Which coating and grade are used on the insert? The insert utilises the Tiger‑tec Silver coating combined with the WKP35S coated carbide grade to enhance wear resistance and process stability in drilling applications. How does the Trigon 80° form affect drilling performance? The Trigon 80° form provides a robust cutting geometry that reduces axial load and supports consistent hole quality; it also improves seating repeatability in compatible drill and boring holders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WOMX05T304-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a versatile WSP45G grade and precise Trigon 80° geometry for consistent chip control and long tool life; order directly via Metav Werkzeuge or contact our consultants for application support. WOMX05T304-D57 WSP45G – Drilling/boring indexable insert by Walter Tools (Tiger·tec Gold, Trigon 80°, 0.4 mm) WOMX05T304-D57 WSP45G is a drilling/boring indexable insert designed for demanding holemaking in a wide range of materials, combining a PVD coating and robust geometry for reliable machining. *Tiger·tec Gold PVD coating *WSP45G: versatile P/M/S grade *Trigon 80° geometry, 0.4 mm corner radius *Suitable for drilling and boring applications Consistent hole quality through optimised coating and grade The combination of a Tiger·tec Gold PVD coating and the WSP45G grade ensures stable performance when machining Stahl, rostfreier Stahl and high-temperature alloys. The coating reduces friction at the tool–workpiece interface, which improves chip control and reduces built-up edge formation. For drilling and boring operations this translates into fewer interruptions for tool changes and a steadier dimensional output, enhancing productivity on serial and batch work. Geometry that supports secure cutting and ease of setup The Trigon 80° geometry with a 0.4 mm corner radius delivers a balance between cutting-edge strength and penetration for entry into the material. This form helps to control cutting forces and supports axial stability during holemaking, resulting in improved bore cylindricity and surface finish. The insert's form also simplifies clamping and repeat indexation, reducing machine downtime and setup variability for production runs. Versatility across material groups and machining conditions Rated for P/M/S applications, the insert is intended for machining unalloyed and alloyed Stahl, rostfreier Stahl, and heat-resistant superalloys or Titan. The P/M/S suitability means a single insert family can be employed across varied workpieces, lowering tool inventory complexity and increasing process flexibility. Where thermal loads and difficult chip forms occur, the combination of grade and coating promotes a stable cutting edge and predictable wear behaviour. Operational benefits and application guidance For workshop managers and process engineers the indexable insert provides a practical route to higher throughput with controllable tool life. The PVD surface treatment resists thermal degradation and the chipbreaker designation D57 is tuned for efficient chip formation in common drilling/boring cycles. When defining cutting data, prioritise moderate feed on entry and verify coolant strategy to maintain surface integrity; the insert supports industrial holemaking where repeatability and low rework rates are required. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts, specification matching and cutting data recommendations; reach Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: WOMX05T304-D57-WSP45G-WALTER Designation: WOMX05T304-D57 WSP45G Product type: Drilling/boring indexable insert Series: Tiger·tec Gold Grade: WSP45G Facts Geometry: Trigon 80° Size: 05 Corner radius: 0.4 mm Thickness: T3 Chipbreaker: D57 Tolerance class: M Features Coating: Tiger·tec Gold (PVD) Substrate: coated cemented carbide Material applications: Stahl, rostfreier Stahl, heat-resistant alloys / Titan Typical applications: drilling, boring, holemaking with indexable tooling FAQ What materials is this insert suitable for? The WOMX05T304-D57 WSP45G insert by Walter Tools is specified for machining Stahl, rostfreier Stahl and heat-resistant alloys including Titan, reflecting its P/M/S suitability. How does the Tiger·tec Gold coating benefit drilling operations? The Tiger·tec Gold PVD coating on the WSP45G grade reduces friction and thermal wear, improving chip control and extending the effective cutting life in drilling and boring cycles. What does the D57 chipbreaker imply for chip formation? Chipbreaker D57 on this insert is designed for controlled chip segmentation in holemaking, aiding evacuation and reducing the risk of chip-related surface damage. Is the Trigon 80° geometry suitable for deep-hole drilling? The Trigon 80° form provides stable axial behaviour and good entry characteristics; for deep-hole applications verify coolant and clamping strategy to ensure chip evacuation and dimensional consistency. Can this insert be indexed to extend tool life? Yes, the insert is designed for indexable tooling systems where multiple cutting edges can be used sequentially to extend life and maintain consistent hole quality. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
WOMX06T304-B57 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of a combination of durable coating, reliable chip control and precise Trigon geometry for efficient drilling and bore‑enlargement operations; order the insert directly via Metav Werkzeuge or consult the team for application support. WOMX06T304-B57 WKP35S indexable insert (drilling/bore enlargement), Tiger‑tec Silver – for steel and cast iron | Walter Tools WOMX06T304-B57 WKP35S is an indexable insert designed for drilling and bore‑enlargement tasks in steel and cast iron applications, offering a balance of wear resistance and chip control in demanding production environments. Tiger‑tec Silver coating for high wear resistance Trigon 80° form with 0.4 mm corner radius Proven B57 chipformer for stable chip control Suited to steel and cast iron machining Extended tool life through advanced coating technology The WKP35S grade, realised in Tiger‑tec Silver, provides enhanced wear resistance under the elevated temperatures typical of steel machining. The coated carbide construction reduces abrasion and flank wear, which translates into fewer indexings and longer tool cycles. For production-focused shops this means reduced machine downtime and a steadier process window; the coating technology enables consistent edge integrity across runs, supporting predictable component tolerances and improved overall equipment effectiveness. Accurate geometry for dependable chip formation and hole quality The Trigon 80° form with a 0.4 mm corner radius and the dedicated B57 chipformer combine to deliver controlled chip breaking and evacuation during drilling and bore enlargement. This geometry stabilises cutting forces and minimises vibration in interrupted cuts, which is particularly beneficial when machining medium to high‑strength steels and abrasive cast iron. The insert’s form ensures repeatable hole quality and surface finish while the modest corner radius balances strength with the ability to reach tighter internal radii where required. Process efficiency and integration with existing tool systems With a T3 plate thickness and the standard WOMX06T304-B57 designation, the insert is straightforward to integrate into compatible drill and boring heads that accept Trigon 80° tooling. The grade is optimised for the machining of steels (P) and cast irons (K) according to ISO groupings, offering a practical solution for mixed production shops. Stable chip control and reduced wear lead to fewer tool changes, contributing to lower cycle costs and more predictable batch throughput; for mixed‑material workpieces, this insert helps maintain consistent part quality across material transitions. Contact Metav Werkzeuge for tailored application advice or to request compatible toolholder options for Walter Tools inserts and the WOMX06T304-B57 WKP35S Technical Data Article number: WOMX06T304-B57-WKP35S-WALTER SKU: WOMX06T304-B57-WKP35S-WALTER Product designation: Drilling/bore‑enlargement indexable insert Series: Tiger‑tec Silver Grade: WKP35S Facts Plate size: 06 Plate form: Trigon 80° Corner radius: 0.4 mm Plate thickness: T3 Tolerance class: M Special features Chipformer: B57 Suitable material groups: Steel (P) and Cast iron (K) Execution: X ISO designation: WOMX06T304-B57 WKP35S Indexable carbide with Tiger‑tec Silver coating FAQ Which materials is this insert designed to machine? The WOMX06T304-B57 WKP35S insert is specified for steel (P) and cast iron (K) applications according to ISO groupings, reflecting the WKP35S grade’s focus on typical chip behaviour and wear patterns in those materials. What is the purpose of the B57 chipformer? The B57 chipformer on this Trigon insert promotes reliable chip breaking and evacuation during drilling and bore enlargement, improving stability and surface finish when machining steel and cast iron with a Walter Tools insert. How does the Trigon 80° shape affect performance? The Trigon 80° geometry provides a robust cutting edge and reduced cutting forces in radial engagement, which helps maintain hole quality and extends tool life in demanding drilling operations. What are the key dimensional specifications to check for toolholder compatibility? Confirm the plate size (06), plate thickness (T3) and Trigon 80° seating; the SKU WOMX06T304-B57-WKP35S-WALTER denotes the standard geometry and grade for selection of compatible toolholders. Is the insert suitable for interrupted cuts and roughing operations? Yes; the combination of WKP35S grade, Tiger‑tec Silver coating and the 0.4 mm corner radius offers a compromise between edge strength and wear resistance, making the insert appropriate for many interrupted and continuous drilling tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WOMX06T304-B57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the Trigon 80° geometry and a 0.4 mm corner radius to secure stable cutting performance and predictable tool life in drilling and reaming operations; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. WOMX06T304-B57 WSP45G – Drill/reamer indexable insert, Tiger·tec Gold, Trigon 80° (Walter Tools) WOMX06T304-B57 WSP45G is a drill/reamer indexable insert designed for stable material removal in steels, stainless steels and heat-resistant superalloys, combining a PVD-coated carbide grade with an 80° trigon form for reliable edge strength. Tiger·tec Gold PVD coating Suitable for steel, stainless and superalloys Trigon 80° insert geometry 0.4 mm corner radius for robust edges Greater process security through advanced coating and grade The combination of Tiger·tec Gold surface technology and a coated carbide substrate in the WSP45G grade provides a balance of toughness and heat resistance that benefits drilling and reaming. The PVD layer improves adhesion and thermal protection while the base carbide maintains fracture resistance under interrupted cutting. This results in fewer edge failures and longer intervals between indexings, which supports predictable cycle times and reduces unplanned downtime. For operations that alternate between mild and stainless steels or encounter elevated temperatures, the coated grade helps maintain a consistent cutting behaviour. Geometry and edge preparation for consistent chip control Engineered with a Trigon 80° form and B57 chipbreaker, this insert delivers controlled chip formation during enlargement and through-tool drilling tasks. The 0.4 mm corner radius increases edge strength without compromising accessibility in smaller diameters, while the T3 thickness offers axial rigidity suited to radial forces encountered in reaming and bore finishing. The tolerance class M ensures interchangeability and positional accuracy in multi-insert cutters. In practice, the geometry and chip control reduce recutting and support a stable surface finish, translating technical features into tangible improvements in component quality. Application suitability and production benefits Rated for ISO groups P / M / S (steel, stainless steel and heat-resistant superalloys/titanium), the insert is optimised for demanding applications where thermal load and material toughness challenge the cutting edge. The combination of the grade, geometry and chipbreaker offers higher material removal rates and repeatable results in serial production or small-batch manufacture. Where finish and dimensional stability matter, the solution enhances throughput while maintaining component integrity. For process planning, consider matching feed and speed to material group and employing coolant strategies appropriate for the workpiece to exploit the insert’s thermal resilience. For application-specific recommendations or availability of the Walter Tools WOMX06T304-B57 WSP45G insert, contact Metav Werkzeuge for tailored advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: WOMX06T304-B57-WSP45G-WALTER Designation: WOMX06T304-B57 WSP45G Product type: Drill/reamer indexable insert Manufacturer: Walter Tools Core specifications Insert form: Trigon 80° Insert size: 06 Corner radius: 0.4 mm Thickness: T3 Tolerance class: M Materials & features Coating: Tiger·tec Gold (PVD) Grade: WSP45G (coated carbide) Chipbreaker: B57 Suitable for: Steel (P), Stainless steel (M), Superalloys/Titanium (S) Execution: X FAQ Which materials can be machined with this insert? The WOMX06T304-B57 WSP45G insert is suitable for steel, stainless steel and heat-resistant superalloys/titanium (ISO groups P, M and S), enabling versatile use across common engineering materials. What is the advantage of the Tiger·tec Gold coating? The Tiger·tec Gold PVD coating increases thermal resistance and adhesion on the cutting edge, which with the coated carbide substrate reduces wear and supports consistent edge life under elevated temperatures. How does the Trigon 80° geometry affect drilling and reaming? The Trigon 80° shape provides a favourable balance between edge strength and access into bores, improving stability during enlargement operations and contributing to a steady surface finish. What role does the B57 chipbreaker play? The B57 chipbreaker is tuned to manage chip flow in drilling and reaming tasks, promoting controlled chip formation and helping to prevent entanglement or re-cutting, which benefits component quality. Is the insert suited to interrupted cuts? Yes; the coated carbide WSP45G grade and the 0.4 mm corner radius increase resistance to chipping, making the insert appropriate for operations with moderate interruptions. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original, brand-new product from the manufacturer. The brand in the product data is Walter Tools.
WOMX06T304-D57 WAK15 Wendeplatten - Walter Tools
High-performance machining for non-ferrous metals: the combination of the WAK15 uncoated carbide grade, a Trigon 80° insert form and the D57 chipbreaker ensures efficient, low-build-up cutting in aluminium operations. Order directly via Metav Werkzeuge or contact our consultants for application-specific advice and fast availability. WOMX06T304-D57 WAK15 — Drilling/bore indexable insert, Trigon 80°, Walter Tools The WOMX06T304-D57 WAK15 is a Trigon 80° indexable insert optimised for aluminium and other non-ferrous metals, designed for reliable chip control and repeatable tool life in drilling and bore-enlarging operations. Uncoated carbide grade WAK15 Trigon 80° insert form 0.4 mm corner radius Chipbreaker D57 optimised for aluminium Faster, cleaner aluminium operations with proven geometry The Trigon 80° insert shape combined with a 0.4 mm corner radius provides a stable cutting edge that reduces vibration and improves bore quality in soft, ductile materials. Thanks to the angular geometry, this design supports secure seating in drills and boring heads and helps maintain dimensional stability during interrupted cuts. The result is consistent hole quality and fewer rework cycles for operations focused on aluminium and similar materials. Durable uncoated carbide for low adhesion and sharp cutting The WAK15 grade is an uncoated carbide specifically matched to non-ferrous machining; its sharp edge geometry and microstructure reduce material adhesion on the cutting face. That behaviour lowers the tendency for built-up edge and preserves the cutting profile over extended runs, which translates into more productive machining times and reduced insert change frequency. This combination is particularly useful where surface finish and tool life must be balanced. Controlled chips and repeatable process results The D57 chipbreaker is tuned to produce short, manageable chips when machining aluminium and other non-ferrous metals, lowering the risk of entanglement and improving coolant access to the cutting zone. Predictable chip formation contributes directly to process security and easier handling at the machine, which supports higher spindle speeds and stable feeds without compromising tool life. The insert’s Walter N‑Grade System background underpins compatibility with established drilling and boring toolholders. Practical compatibility for workshop integration With an insert size marked as 06 and thickness T3, installation and indexation are straightforward in standard indexable systems designed for Trigon geometry. The insert’s execution class and tolerance rating (execution: X, tolerance class: M) ensure repeatable positioning and interchangeability across tool assemblies. For operations processing high volumes of aluminium components, this insert offers a pragmatic mix of sharp cutting action and predictable wear behaviour for streamlined workshop workflows. For efficient aluminium machining with Walter Tools inserts, contact Metav Werkzeuge for tailored technical advice and rapid supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: WOMX06T304-D57-WAK15-WALTER Product label: Bohr-/Aufbohrwendeschneidplatte WOMX06T304-D57 WAK15 Walter Tools Type: Drilling/bore indexable insert Numbers / Core Technical Data Insert form: Trigon 80° Insert size: 06 Thickness: T3 Corner radius: 0.4 mm Tolerance class: M Designs / Special Features Grade: WAK15 (uncoated carbide) Chipbreaker: D57 Series: Walter N-Sortensystem Execution: X Suitable for: Aluminium and other non-ferrous metals FAQ What materials is this insert designed for? The WOMX06T304-D57 WAK15 insert is designed primarily for aluminium and other non‑ferrous metals, using the WAK15 uncoated carbide grade and the D57 chipbreaker to limit material adhesion. How does the Trigon 80° form affect machining performance? The Trigon 80° geometry gives a robust cutting edge and improved seating in drill and bore holders, which helps maintain dimensional stability and reduces vibration during drilling and boring operations. What does the WAK15 grade mean in practice? WAK15 denotes an uncoated carbide grade formulated for non‑ferrous machining; it delivers sharp cutting behaviour and reduced built‑up edge when processing aluminium alloys. Is the chipflow suited to automated production cells? Yes, the D57 chipbreaker promotes short, controlled chips in aluminium machining, supporting automated cells by reducing chip handling issues and improving coolant access. Can this insert be indexed for repeated use? The insert’s Trigon form and tolerance class M permit repeatable indexation in compatible toolholders, allowing multiple cutting edges to be used before replacement. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WOMX06T304-D57 WKP25S Wendeplatten - Walter Tools
Combining the Tiger‑tec Silver coating with the WKP25S grade provides robust wear resistance and reliable chip control for machining steel and cast iron; its Trigon 80° geometry and D57 chipbreaker support stable drilling and bore enlargement. Order the insert directly via Metav Werkzeuge or consult our technical advisors for process-specific data. WOMX06T304-D57 WKP25S drilling/bore-enlarging indexable insert — Walter Tools, Trigon 80° (06, r0.4) The WOMX06T304-D57 WKP25S is a drilling and bore-enlarging indexable cutting insert designed for precision machining of steel and cast iron, combining a hard-wearing coated grade with geometry that favours stability in axial cutting operations. Tiger‑tec Silver coated grade WKP25S Optimised chip control with D57 chipbreaker Trigon 80° geometry for stability and reach Suitable for steel and cast iron machining Durable coating and grade for dependable tool life The combination of the Tiger‑tec Silver coating and the WKP25S coated carbide grade is engineered for wear resistance and consistent edge life in industrial applications. Coated grades reduce flank and crater wear by providing a thermal and chemical barrier between the chip and the substrate; this results in fewer interruptions for insert changes and more predictable production cycles. For operations on steel and cast iron, the selected grade balances toughness and hardness to resist abrasive and adhesive wear while maintaining cutting-edge integrity. Geometry and chip control that stabilise drilling performance The Trigon 80° insert form with a corner radius of r0.4 mm and the D57 chipbreaker deliver controlled chip formation and improved hole quality. A trigon geometry increases contact stability in axial operations, reducing vibration during plunge or short-ream passes. The D57 chipbreaker is designed to produce short, segmented chips when machining materials classed as P and K under ISO 513, lowering the risk of long, tangled chips and improving evacuation in deep or confined bores. The plate thickness T3 and tolerance class M ensure repeatable seating and clamping on modern drill bodies, supporting consistent concentricity and surface finish. Application focus and production advantages Intended for drilling and bore enlargement on standard CNC drilling heads and multi-spindle machines, this indexable insert offers a practical route to increased throughput and reduced tooling costs. The robust combination of grade and geometry leads to fewer regrinds and predictable tool-change intervals, aiding process planning and inventory management. In addition to performance gains, the insert simplifies grade selection for mixed-production environments where both steel and cast iron components are machined, making it a versatile choice for job shops and production lines alike. Contact Metav Werkzeuge today to specify the optimal Walter Tools insert stage for the process, request detailed cutting data or arrange supply via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: WOMX06T304-D57-WKP25S-WALTER Product label: Bohr-/Aufbohrwendeschneidplatte WOMX06T304-D57 WKP25S Walter Tools Manufacturer: Walter Tools Facts Plate size designation: 06 Corner radius: r0.4 mm Geometry angle: 80° Plate thickness: T3 Tolerance class: M Special features Coating: Tiger‑tec Silver Grade: WKP25S (coated carbide) Chipbreaker: D57 Form: Trigon 80° Execution: X Material application groups: Steel (P), Cast iron (K) FAQ Which materials can be machined with this insert? The WOMX06T304-D57 WKP25S is specified for steel (P) and cast iron (K) according to ISO 513, offering matched cutting behaviour for both groups. What advantages does the Trigon 80° form provide in drilling? Trigon 80° geometry improves axial stability and penetration control, helping the insert maintain concentricity and reduce vibration during drilling and bore-enlarging tasks. How does the D57 chipbreaker influence chip formation? The D57 chipbreaker promotes short, controlled chips when cutting P and K materials, improving chip evacuation and reducing the chance of chip entanglement in deep bores. Is the insert suitable for plunge drilling and short boring operations? Yes, the insert’s Trigon geometry and r0.4 corner radius give the stiffness and edge support required for plunge drilling and short-range bore enlargement. What does tolerance class M mean for mounting and repeatability? Tolerance class M indicates a medium tolerance level for dimensional accuracy, supporting consistent seating and repeatable performance when the insert is mounted in compatible toolholders. Manufacturer: The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names belong to their respective owners. The mentioned brand is cited for explanatory purposes only; there is no affiliation implied with Metav Werkzeuge.
WOMX06T304-D57 WKP35S X Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating, a WKP35S grade and trigon 80° geometry ensures reliable wear resistance and consistent chip control for drilling and reaming operations; order directly via Metav Werkzeuge or consult our technical advisors for process matching. WOMX06T304-D57 WKP35S — Drilling/reaming indexable insert, Trigon 80° geometry (Walter Tools) The WOMX06T304-D57 WKP35S is an indexable insert engineered for drilling and reaming in steel and cast iron, offering a balance of wear resistance and stable chip formation for demanding production environments. Tiger·tec Silver coating for wear resistance Trigon 80° geometry for rigid drilling Grade WKP35S optimised for steel and cast iron Corner radius 0.4 mm for consistent chip control Boosted productivity through reliable coated-carbide performance The Tiger·tec Silver coating combined with the WKP35S coated carbide substrate delivers extended tool life and predictable cutting behaviour, which directly reduces unplanned machine downtime. Designed for the thermal and mechanical loads typical of turning and drilling steel and cast iron, this insert helps maintain cutting-edge integrity under cyclic stresses. The consistent wear pattern supports longer tool life and fewer insert changes, resulting in measurable gains in throughput and lower cost per drilled hole. Precision geometry for secure chip control and stable holes The trigon 80° form with a 0.4 mm corner radius and the D57 chipbreaker provide controlled chip formation during drilling and reaming, reducing the risk of cold welding and edge build-up when machining abrasive cast components or tougher steels. The trigon shape improves radial support and tool stiffness, which benefits concentricity and hole quality. The chipbreaker’s design assists in breaking and evacuating chips, so hole finish and dimensional accuracy are improved without complex process adjustments. Easy integration into existing toolholders with predictable results Available in size 06 and thickness T3, this indexable insert fits standard drilling/reaming pockets and follows machining tolerances consistent with tolerance class M, allowing straightforward retrofit into established setups. The modest geometry simplifies parameter selection: manufacturers can expect steady performance with optimised cutting speeds and feeds for Steel (P) and Cast iron (K) applications. Cleaner chip control and stable cutting edges contribute to lower rework rates and a more reliable production flow. For application advice or to specify the Walter Tools WKP35S insert for a given machining task, contact Metav Werkzeuge for technical consultation via email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: WOMX06T304-D57-WKP35S-WALTER Product type: Drilling/reaming indexable insert Manufacturer: Walter Tools Facts Shape: Trigon 80° Size: 06 Thickness: T3 Corner radius: 0.4 mm Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP35S Chipbreaker: D57 Materials: Steel (P), Cast iron (K) Execution: X FAQ What materials is this insert designed for? The WOMX06T304-D57 WKP35S insert is designed primarily for Steel (P) and Cast iron (K) applications, reflecting the intended use of the WKP35S grade and the Tiger·tec Silver coating. How does the Tiger·tec Silver coating benefit drilling operations? Tiger·tec Silver on the WKP35S grade reduces abrasive wear and thermal loading during drilling and reaming, improving the insert’s resistance to edge breakdown and extending usable tool life. Is the trigon 80° geometry suitable for reaming as well as drilling? Yes; the trigon 80° geometry offers increased radial support and stiffness, which supports both drilling and medium-duty reaming tasks while helping to maintain hole quality. What role does the D57 chipbreaker play in performance? The D57 chipbreaker promotes controlled chip formation and evacuation, reducing the likelihood of chip entanglement and improving surface finish during continuous drilling cycles. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered item is original, brand-new goods from the manufacturer.
WOMX06T304-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of durable edge life and consistent chip control for dependable drilling and reaming performance; the robust WSP45G grade and Tiger·tec Gold technology deliver process security and good surface finish. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. WOMX06T304-D57 WSP45G — Drill/Reaming Indexable Insert, Trigon 80°, Tiger·tec Gold (Walter Tools) The WOMX06T304-D57 WSP45G is a trigon 80° drill/reaming indexable insert engineered for demanding metalcutting tasks, optimised for steel, stainless steel and high-temperature alloys. Tiger·tec Gold PVD for edge stability Trigon 80° geometry for stable drilling 0.4 mm corner radius for consistent finish Suitable for steel, stainless and superalloys Durable edges that reduce tool changes The combination of the WSP45G cemented carbide grade and Tiger·tec Gold surface treatment results in a PVD-coated cutting edge engineered for wear resistance and long life. This means fewer interruptions for insert changes and a steadier production rhythm. The deposit-like coating supports stable cutting at elevated temperatures, so the insert retains its geometry longer under the thermal loads typical of drilling and reaming operations. Geometry that improves process stability The Trigon 80° plate form with a 0.4 mm corner radius provides the mechanical strength required for axial loads in drilling and reaming. The trigonal shape helps distribute cutting forces evenly and reduces the risk of chipping at the insert corner, delivering a more consistent bore diameter and surface finish. For process planners, this translates into fewer rejected parts and more reproducible cycle times. Versatility across difficult materials Designed for use across the ISO groups P / M / S, the insert suits machining of steel, stainless steel and superalloys/titanium. The grade’s toughness supports reliable chip control when workpiece materials are prone to built-up edge or poor heat conduction, while the coating improves resistance to abrasive and adhesive wear. The result is a versatile indexable insert that performs in a wide range of applications from conventional steels to heat-resistant alloys. Practical features for workshop integration With an insert size 06, thickness T3 and chipbreaker D57, the component integrates into common drill and reaming toolholders without excessive setup complexity. The tolerance class M and relief geometry X ensure compatibility with standard clamping systems, supporting quick changeover and minimised downtime. The compact design helps maintain cutting stability and contributes to secure, repeatable results in batch production. Contact Metav Werkzeuge for tailored application recommendations and to arrange supply of the Walter Tools WOMX06T304-D57 WSP45G insert; our technical team can advise on cutting data and holder compatibility. Technical Data Article number: WOMX06T304-D57-WSP45G-WALTER ISO designation: WOMX06T304-D57 WSP45G Series: Tiger-tec Gold Manufacturer: Walter Tools Facts Insert size: 06 Plate form: Trigon 80° Corner radius: 0.4 mm Thickness: T3 Chipbreaker: D57 Tolerance class: M Special features Grade: WSP45G (PVD-coated cemented carbide) Application: Drill / Reaming indexable insert Material suitability: steel; stainless steel; superalloys and titanium Geometry/relief: X Suitable for milling-related operations where high toughness is required FAQ What applications is this insert best suited to? The WOMX06T304-D57 WSP45G insert (Walter Tools) is designed for drilling and reaming where edge stability and resistance to thermal loads are required; it is also suited to related milling operations in tougher materials. Which materials can be machined with this grade? WSP45G is suitable for ISO groups P, M and S, meaning steel, stainless steel and heat-resistant superalloys/titanium can be machined effectively with this insert. How does the Tiger·tec Gold treatment help performance? The Tiger·tec Gold PVD layer on the cutting edge increases wear resistance and helps maintain geometry under higher cutting temperatures, improving process security and insert life. What are the key geometry features to note? The insert uses a Trigon 80° plate form with a 0.4 mm corner radius and T3 thickness, which together offer strength for axial loads and contribute to consistent bore quality. Is the insert compatible with standard toolholders? The WOMX06T304-D57 WSP45G follows common ISO indexing conventions and tolerance class M, allowing straightforward integration into standard drill and reaming holders designed for trigonal inserts. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarked names and product designations are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation. The offered article is original and brand-new from the manufacturer (Walter Tools).
WOMX080408-B57 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of the proven combination of the WKP35S grade and Tiger·tec Silver coating for reliable machining of steel and cast iron; the Trigon 80° geometry and 0.8 mm corner radius ensure stable cutting and extended edge life. Order directly via Metav Werkzeuge or consult the team for application-specific cutting data. WOMX080408-B57 WKP35S Drill/boring indexable insert, Trigon 80° – Walter Tools (Tiger·tec Silver) The WOMX080408-B57 WKP35S is a precision indexable insert for drilling and boring applications, designed for productive machining of steel and cast iron with a Trigon 80° form and Tiger·tec Silver coating. Tiger·tec Silver coating for enhanced wear resistance WKP35S grade for steel and cast iron Trigon 80° form for stable cutting edge 0.8 mm corner radius for robust edge strength Delivering measurable productivity through advanced grade technology The insert’s core advantage lies in the WKP35S cutting grade combined with the Tiger·tec Silver coating, which together reduce flank and crater wear under the thermal and mechanical loads typical of machining steel and cast iron. Designed according to ISO material groupings P and K, the grade balances toughness and coating hardness so that chipping is minimised and tool life is extended. For shops aiming to increase output without compromising repeatability, this combination translates into fewer index changes and more consistent batch results. Geometry engineered for process reliability and surface quality The Trigon 80° plate form provides a stout cutting edge that resists deflection during drilling and boring, while the 0.8 mm corner radius increases edge strength for interrupted cuts and varying feed conditions. The B57 chipbreaker is tailored to promote controlled chip formation on both steels and cast irons, reducing the risk of built-up edge and coolant blockage. Tolerance class M and the plate thickness ensure interchangeability and stable seating in standard toolholders, contributing to consistent surface finish and dimensional accuracy on workpieces. Practical guidance for integration and material suitability This insert is specified for applications where a balance of wear resistance and toughness is required; it performs well on unalloyed and alloyed steels as well as a range of cast irons, per the ISO 513 grouping for P and K materials. The plate size and thickness support common insert pockets for drilling/boring heads; the execution code X indicates the geometry variant. For process planning, expect improved tool life in medium to high cutting speeds compared with uncoated grades, and use coolant strategies that support chip evacuation to leverage the chipbreaker design fully. Contact Metav Werkzeuge for tailored cutting data or an application review — Metav Werkzeuge can advise on feeds, speeds and holder compatibility to ensure optimal results with Walter Tools inserts Technical Data SKU: WOMX080408-B57-WKP35S-WALTER Article designation: WOMX080408-B57 WKP35S Manufacturer: Walter Tools Product type: Drill/boring indexable insert Facts Plate form: Trigon 80° Size: 08 Thickness: 04 Corner radius: 0.8 mm Chipbreaker: B57 Grade: WKP35S Series: Tiger·tec Silver Tolerance class: M Execution: X Special features Coating: Tiger·tec Silver (coated carbide) Material applicability: P (steel), K (cast iron) Intended use: drilling and boring insert geometry Stable chip formation and robust edge design FAQ What materials is this insert suitable for? The WOMX080408-B57 WKP35S insert is designed for steel and cast iron (ISO groups P and K), with the WKP35S grade optimised for those materials. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating increases wear resistance and thermal stability, enabling longer tool life and more consistent cutting behaviour when machining steels and cast irons. What does the Trigon 80° form mean for machining stability? A Trigon 80° plate offers a robust cutting edge that reduces deflection in drilling and boring, improving dimensional accuracy and surface finish under load. Is the chipbreaker suitable for interrupted cuts? Yes, the B57 chipbreaker promotes controlled chip formation and, together with the 0.8 mm corner radius, supports interrupted and unstable cutting conditions. Which tolerance and dimensions ensure compatibility with toolholders? Tolerance class M, size 08 and thickness 04 correspond to standard insert pockets for many drilling and boring heads, facilitating reliable seating and repeatable positioning. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. There is no connection between our company and the mentioned brands. The offered item is original, brand-new merchandise of the manufacturer. The Walter brand appears where relevant to describe the product provenance.
WOMX080408-B57 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, stable chip control (B57) and the Trigon 80° geometry for consistent machining across steels, stainless steels and heat-resistant alloys; order directly via Metav Werkzeuge or consult our specialists for application advice. WOMX080408-B57 WSP45G Trigon 80° indexable insert — Tiger·tec Gold, versatile P/M/S performance by Walter Tools WOMX080408-B57 WSP45G is an indexable insert for drilling and enlargement operations, designed for robust cutting in steel, stainless steel and high-temperature alloys Tiger·tec Gold PVD coating for wear resistance Trigon 80° geometry for stable engagement B57 chipbreaker for effective chip control 0.8 mm corner radius for edge strength Reliable performance across common and demanding materials The Tiger·tec Gold PVD-coated grade delivers a balance of wear resistance and toughness, making it well suited to machining a wide range of materials. As a coated carbide cutting grade, the insert supports stable cutting-edge behaviour when facing the heat and adhesion challenges typical of stainless steels and high-temperature alloys. This results in fewer unexpected tool changes and more predictable tool life, which supports planning and reduces downtime on the shop floor. The material designation P / M / S clarifies suitability for general steels, rostfreier Stahl and heat-resistant superalloys or titanium alloys. Predictable chip control and secure cutting edge The integrated B57 chipbreaker is optimised to shape chips reliably under varying cutting conditions, reducing the risk of built-up edge and supporting consistent surface finish. The moderate 0.8 mm corner radius reinforces the cutting edge against mechanical and thermal stress during repeated passes, while the coated substrate helps delay flank wear. For operations where chip evacuation and repeatable results matter, this combination improves process security and reduces rework effort. Geometry and mounting that support process stability The Trigon 80° plate form provides a stable seat and a positive engagement angle for drilling and enlargement tasks, improving axial support and reducing vibration compared with less rigid geometries. The plate size and thickness are selected to match compatible toolholders and ensure concentric mounting; tolerance class M supports close dimensional conformity for batch production. These geometric choices translate into more consistent hole quality and fewer rejects, particularly in medium-duty production environments. Practical benefits for workshop efficiency By combining an advanced coated grade with a purpose-designed chipbreaker and robust geometry, this insert contributes to longer sustained cutting performance and easier process setup. The insert’s construction supports reliable results in both intermittent and continuous cuts, meaning fewer unscheduled interventions and more productive machine time. Where flexibility is required, the insert’s broad material compatibility simplifies inventory management, allowing one grade to cover several common material groups. Request application guidance from Metav Werkzeuge for optimised cutting data or order the WOMX080408-B57 WSP45G directly through Metav Werkzeuge for quick delivery and tailored advice Technical data Article number: WOMX080408-B57-WSP45G-WALTER SKU: WOMX080408-B57-WSP45G-WALTER Product type: Bohr-/Aufbohrwendeschneidplatte Facts Corner radius: 0.8 mm Plate form: Trigon 80° Plate size: 08 Plate thickness: 04 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WSP45G (PVD-coated carbide) Chipbreaker: B57 Material compatibility: P / M / S (Stahl, rostfreier Stahl, hitzebeständige Legierungen) FAQ Is this insert suitable for stainless steel machining? Yes. The WSP45G grade with Tiger·tec Gold coating is designed for rostfreier Stahl and offers stable chip formation and wear resistance when machining stainless steels. Can the insert handle titanium and nickel-based superalloys? The insert is rated for S-type materials; the combination of grade and geometry supports cutting of heat-resistant superalloys and titanium, with an emphasis on edge stability. What role does the B57 chipbreaker play? The B57 chipbreaker shapes chips to promote safe evacuation and reduce the risk of built-up edge, improving surface finish and tool life for the applications listed. Which geometry benefits hole quality in drilling/enlargement tasks? The Trigon 80° form provides secure axial support and improved engagement, which helps maintain concentricity and reduces vibration during drilling and enlargement operations. Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WOMX080408-D57 WAK15 Wendeplatten - Walter Tools
Combining the Trigon 80° geometry with the WAK15 uncoated carbide grade and a 0.8 mm corner radius yields reliable performance when machining aluminium and other non‑ferrous metals; the D57 chipbreaker further stabilises chip formation for consistent results. Order this insert directly via Metav Werkzeuge or consult the specialists for application support. WOMX080408-D57 WAK15 drill/bore indexable insert – Walter Tools WOMX080408-D57 WAK15 is an indexable cutting insert for drilling and bore enlargement in aluminium and other non‑ferrous metals Uncoated carbide grade WAK15 for N‑materials Trigon 80° geometry for stable contact 0.8 mm corner radius for edge strength Chipbreaker D57 for optimised chip control Precision for non‑ferrous machining and production reliability The Trigon 80° geometry and the WAK15 carbide grade are configured for machining aluminium and non‑ferrous metals, delivering a balance between sharp cutting action and sufficient edge robustness. In practice this means improved hole quality and repeatable bore diameters when processing softer alloys; the geometry reduces axial forces while the chosen cutting material maintains form at typical cutting parameters for these groups. The result is a more predictable process and fewer reworks in series production. Geometry and chip control that reduce machining interruptions A controlled chipflow is essential for efficient drilling and boring. The combination of the D57 chipbreaker and the trigon form improves chip breaking and evacuation in circular bores, decreasing the risk of built‑up edge and machine stoppages. With a corner radius of 0.8 mm, the insert keeps a durable cutting edge that tolerates intermittent contact and contributes to consistent surface finishes. These attributes support longer uninterrupted runs and higher machine availability. Material choice explained: uncoated carbide for non‑ferrous applications The uncoated carbide WAK15 grade is specifically intended for N‑materials (non‑ferrous), where coatings can sometimes promote material adhesion. An uncoated substrate provides a very sharp primary edge and low friction at the contact zone, reducing the tendency for aluminium to weld onto the insert. For workshops aiming for clean holes and minimal burr formation in light alloys, this material choice combines cutting efficiency with simpler dressing and handling routines. Practical advantages and suitable applications Designed within the Walter N‑system, this insert suits a range of drilling and bore‑enlarging tasks in light‑metal components, fixtures and assemblies. The Trigon 80° form supports stable tool engagement in guided operations, while the D57 chip control helps in semi‑deep bores where evacuation paths are limited. For production environments seeking predictable cycle times, the insert contributes to improved first‑pass yield and easier process documentation thanks to its standardised design features. For tailored recommendations on toolholders, feeds and speeds for Walter Tools’ WAK15 inserts, contact Metav Werkzeuge — the team provides application advice and availability details to match the production requirements. Technical data Article number: WOMX080408-D57-WAK15-WALTER Label: Bohr-/Aufbohrwendeschneidplatte WOMX080408-D57 WAK15 Walter Tools Manufacturer: Walter Tools Facts Geometry: Trigon 80° Corner radius: 0.8 mm Size: 08 Thickness: 04 Chipbreaker: D57 Grade: WAK15 (uncoated carbide) Series: Walter N‑sortensystem Tolerance class: M Execution: X Special features Application: Aluminium and non‑ferrous metals (ISO group N) Designed for drilling and bore‑enlargement operations Optimised for low adhesion on soft alloys FAQ What materials is this insert suitable for? This WOMX080408-D57 WAK15 insert is designed for aluminium and other non‑ferrous metals, specified as ISO group N. Is the cutting grade coated or uncoated? The WAK15 grade is an uncoated carbide chosen to provide a sharp edge and reduce material adhesion when machining light alloys. How does the Trigon 80° shape affect cutting performance? The Trigon 80° form improves contact stability during drilling and bore enlargement, lowering axial loads and supporting consistent hole geometry. What benefit does the D57 chipbreaker provide? The D57 chipbreaker promotes controlled chip formation and evacuation, which reduces the likelihood of clogging and improves process reliability in bores. Can the insert be used for finishing operations? While optimised for drilling and bore enlargement in non‑ferrous materials, the design supports good surface quality; however, finishing requirements depend on the specific process and toolholder arrangement. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes; there is no affiliation between our company and the named brands. The offered article is original factory‑new goods from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com