XDGT2506160R-D57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver robustness, the WKP35S coated-carbide grade and precise geometry for dependable milling of steel and cast iron; order the XDGT2506160R-D57 WKP35S directly via Metav Werkzeuge or consult our technical advisors for application guidance. XDGT2506160R-D57 WKP35S milling insert by Walter Tools — Tiger·tec Silver, coated carbide for steel and cast iron XDGT2506160R-D57 WKP35S is a precision milling insert designed for productive roughing and semi-finishing in steel and cast iron applications, combining a Tiger·tec Silver coating technology with a stable chipforming concept for consistent machining performance Tiger·tec Silver grade WKP35S Suitable for steel and cast iron Chipbreaker D57 for reliable chip control 15° clearance, 1.6 mm corner radius Higher throughput from a wear-resistant cutting grade The Tiger·tec Silver coating paired with the WKP35S grade delivers elevated wear resistance and temperature stability under typical steel and cast-iron cutting conditions. As a coated carbide solution, it helps to extend machining intervals and maintain a stable cutting edge, which supports improved tool life and fewer indexings. For production environments where predictable tool performance is key, this cutting grade offers a cost-effective balance between durability and versatility without compromising cycle time. Safer, more predictable chip control for continuous operation The integrated chipbreaker D57 is engineered to shape chips reliably across a range of feeds, reducing the risk of entangling or jamming during milling. For materials defined under ISO P and ISO K—namely steel and cast iron—this insert promotes short, controllable chips and easier evacuation from the cutting zone. The result is reduced secondary operations, fewer interruptions and a steadier production flow, which supports process reliability and improved surface consistency on the workpiece. Precision geometry that supports consistent surface quality Designed with a 15° clearance and a 1.6 mm corner radius, this insert balances edge strength and finishing capability to achieve predictable edge life and part quality. The nominal plate size 25 and plate thickness 06 combine with tolerance class G to ensure repeatable seating and alignment in compatible toolholders. These geometric parameters help to lower vibration sensitivity and improve dimensional stability when machining semi-finished and finished features, resulting in reliable surface integrity and reduced rework. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Silver inserts or to check availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: XDGT2506160R-D57-WKP35S-WALTER Designation: XDGT2506160R-D57 WKP35S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP35S Facts Plate size: 25 Corner radius: 1.6 mm Clearance angle: 15° Plate thickness: 06 Tolerance class: G Special features Chipbreaker: D57 Coated carbide grade (beschichtetes Hartmetall) Material suitability: P (steel), K (cast iron) Execution: T Stable chip formation and broad material coverage FAQ What materials is this insert suitable for? The XDGT2506160R-D57 WKP35S insert is specified for steel (ISO P) and cast iron (ISO K) machining, leveraging the Tiger·tec Silver coating for these groups. How does the chipbreaker D57 improve performance? The chipbreaker D57 shapes chips to reduce entanglement and improve evacuation, which leads to fewer stoppages and more consistent milling cycles with the XDGT2506160R-D57 WKP35S. What does the corner radius mean for part finish? A 1.6 mm corner radius increases edge strength and helps to produce steadier surface quality with less risk of edge chipping during interrupted cuts when using this insert. Is the grade suitable for high-temperature cutting? The WKP35S coated-carbide grade in the Tiger·tec Silver series is designed for thermal stability under typical steel and cast-iron cutting conditions, providing enhanced wear resistance. Can this insert be used for finishing operations? With its 1.6 mm corner radius and 15° clearance, the insert supports semi-finish and certain finishing tasks, depending on machine rigidity and cutting parameters applied with the XDGT2506160R-D57 WKP35S. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Protected trademarks and product names are the property of their respective owners. Brand names are cited for clarification and identification only; there is no affiliation between our company and the mentioned brands. The offered item is an original, brand-new product from the manufacturer.
XDGT2506160R-D57 WSP45G Wendeplatten - Walter Tools
Combine the Tiger·tec Gold coating with the tough WSP45G grade and a 15° free angle to achieve stable chip formation and extended tool life; order directly via Metav Werkzeuge or consult our specialists for cutting data and application support. XDGT2506160R-D57 WSP45G milling insert – versatile P/M/S machining, Walter Tools A XDGT2506160R-D57 WSP45G indexable milling insert designed for productive milling in steel, stainless steel and heat‑resistant superalloys including titanium. Tiger·tec Gold PVD coating Versatile for steel, stainless and superalloys 15° free angle and 1.6 mm corner radius Stable chip control for high productivity Increased productivity through a robust coated grade The combination of the Tiger·tec Gold coating and the WSP45G grade provides a wear‑resistant cutting edge that is especially suitable for milling operations where thermal load and edge stress are high. The PVD coating reduces flank wear and supports stable chip formation, which leads to fewer interruptions and longer intervals between tool changes. For production environments this translates into a measurable increase in machining uptime and consistent part quality. Reliable performance across a wide material range Developed for the ISO groups P, M and S, the insert is suitable for machining unalloyed and alloyed steel, stainless steel and high‑temperature alloys such as titanium and nickel‑based superalloys. The substrate and coating combination was chosen to balance toughness with heat resistance, so the cutting edge sustains performance where temperature and build‑up tendencies can otherwise reduce process security. This makes the insert a practical choice for mixed‑batch production or workshops that require one versatile grade for several workpiece materials. Geometry engineered for surface finish and process stability The insert’s 15° free angle and 1.6 mm corner radius support a favourable cutting geometry for both finishing and more aggressive material removal. The inscribed circle of 25 mm and the standard thickness code 06 ensure compatibility with common milling bodies, while the D57 chipbreaker helps evacuate chips reliably. The result is improved surface quality and a reduced risk of edge chipping under interrupted cuts, which benefits downstream operations and reduces rework. Practical advantages and application support Using a coated carbide grade with proven chip control yields concrete cost advantages: reduced tool consumption, fewer machine downtimes and predictable component tolerances. The insert is available in the Tiger‑tec Gold series and carries a G tolerance class, offering repeatable accuracy for serial production. For machine set‑up and feed/speed recommendations, technical consultation is available to match the insert to spindle power, coolant strategy and clamp system. Contact Metav Werkzeuge for tailored cutting data, availability and application recommendations for this Walter Tools insert XDGT2506160R-D57 WSP45G Technical Data Article number: XDGT2506160R-D57-WSP45G-WALTER Manufacturer: Walter Tools Product type: Milling insert Designation: XDGT2506160R-D57 WSP45G Facts Free angle: 15° Corner radius: 1.6 mm Inscribed circle: 25 mm Thickness code: 06 Chipbreaker: D57 Tolerance class: G Special features Grade: WSP45G (Tiger·tec Gold PVD) Applicable materials: P / M / S Series: Tiger‑tec Gold Execution: T FAQ What materials can be machined with this insert? This insert is rated for P, M and S groups: steel, stainless steel and heat‑resistant superalloys including titanium, making it suitable for a broad range of applications. What coating and grade are used on the insert? The insert uses the Tiger·tec Gold PVD coating in the WSP45G grade, designed for toughness and high temperature resistance during milling. Which geometry features support chip control? The 15° free angle combined with the D57 chipbreaker and a 1.6 mm corner radius promotes reliable chip evacuation and process stability. Is the insert compatible with standard milling cutters? The inscribed circle of 25 mm and thickness code 06 correspond to common milling cutter systems; compatibility should be confirmed with the cutter manufacturer. How does this insert affect productivity? The coated grade and stable chip formation reduce tool changes and machine downtime, improving overall productivity and surface consistency. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XDGT3207191R-D57 WSP45G Wendeplatten - Walter Tools
Combining the Tiger‑tec Gold PVD coating with a 15° rake angle and a 1.9 mm corner radius gives a reliable balance of edge stability and versatility for milling a wide range of materials; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. Fräswendeschneidplatte XDGT3207191R-D57 WSP45G — Tiger‑tec Gold PVD indexable insert for milling (Walter Tools) XDGT3207191R-D57 WSP45G is an indexable milling insert designed for versatile production milling across demanding materials Tiger‑tec Gold PVD coating Suitable for steel, stainless and superalloys 15° rake angle for stable cutting 1.9 mm corner radius for wear resistance High process reliability across demanding alloys The coated WSP45G grade from the Tiger‑tec Gold series is optimised for milling operations where consistent chip control and long tool life are required. The PVD coating improves wear resistance and reduces adhesion on the cutting edge, which supports stable machining of steel, stainless steel and heat‑resistant superalloys. In practical terms, this means fewer unplanned tool changes and a steadier surface finish in serial production. The insert geometry and edge preparation are chosen to reduce the tendency for build‑up on the cutting edge, so cycle times remain predictable even under higher thermal loads. Geometry engineered for robust performance and repeatability With a 15° free cutting angle and a 1.9 mm corner radius, the insert provides a balance between strength and cutting sharpness. The radius increases resistance to chipping during interrupted cuts, while the rake angle promotes smooth chip flow and lower cutting forces. This combination is particularly beneficial when milling components that alternate between roughing and finishing passes. The specified edge‑breaker designation (D57) and the plate size 32 support reliable clamping and orientation in standard milling cutters, ensuring repeatable positioning and predictable wear patterns across batches. Application benefits that support shop floor efficiency Designed as a tough, general‑purpose milling grade, this insert minimises process variance when switching between materials classified under ISO groups P, M and S. The carbide substrate and the coated chemistry of the grade enhance thermal stability and edge life, which translates into longer life per index and reduced tooling consumption. For production environments aiming to improve throughput and maintain component tolerances, the combination of material compatibility and proven coating technology results in measurable productivity gains and fewer tool‑related disruptions on the shop floor. For reliable, production‑ready inserts from Walter Tools and tailored application support, contact Metav Werkzeuge to discuss the XDGT3207191R‑D57 WSP45G and suitable milling parameters at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: XDGT3207191R-D57-WSP45G-WALTER Product name: Fräswendeschneidplatte XDGT3207191R-D57 WSP45G Brand: Walter Tools Series: Tiger‑tec Gold Grade: WSP45G Facts Free cutting angle: 15° Corner radius: 1.9 mm Plate size: 32 Thickness: 07 Edge breaker: D57 Tolerance class: G Execution: T Special features Coating: PVD (Tiger‑tec Gold) Material substrate: coated carbide Material suitability: P / M / S Typical use: milling applications Robust edge for interrupted cuts FAQ What materials can be machined with this insert? The insert is specified for machining materials in ISO groups P, M and S, meaning it is suitable for steel, stainless steel and heat‑resistant superalloys. How does the Tiger‑tec Gold coating benefit performance? The Tiger‑tec Gold PVD coating on the WSP45G grade increases wear resistance and reduces edge adhesion, supporting longer tool life and improved surface quality in milling. Is the geometry suitable for mixed roughing and finishing operations? Yes. The combination of a 15° rake angle and a 1.9 mm corner radius provides stability for interrupted cuts while maintaining acceptable finishing characteristics. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XDGT3207200R-D57 WKP35S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Silver coating and the WKP35S grade for consistent chip control and long tool life; integrate the insert into productive milling setups for reliable part quality. Order directly via Metav Werkzeuge or consult the technical team for application-specific advice. XDGT3207200R-D57 WKP35S – Milling indexable insert for steel and cast iron (Walter Tools) A robust indexable milling insert, XDGT3207200R-D57 WKP35S, designed for efficient machining of steel and cast iron with Tiger·tec Silver coating Tiger·tec Silver coating for high wear resistance Suited for steel (P) and cast iron (K) machining 15° clearance angle for stable cutting Chipbreaker D57 for controlled chip formation High-performance grade for demanding materials The WKP35S grade, integrated in the Tiger·tec Silver family, is optimised for the thermal and mechanical demands of machining steel and cast iron. The coated cemented carbide composition supports stable edge life under cyclic loads and abrasive conditions typical for cast components. By choosing this grade, process planners benefit from consistent cutting-edge behaviour and predictable tool-life intervals, which simplifies production planning and reduces unplanned tool changes. Geometry engineered for stability and repeatable results A 15° clearance angle reduces flank rubbing and contributes to lower cutting forces, while the corner radius 2 boosts edge strength for interrupted cuts. The insert’s format (plate size 32) and thickness 07 combine to deliver rigidity in the toolholder interface, reducing vibration and improving surface finish. The chipbreaker D57 is tuned to break and evacuate swarf effectively in both long- and short-chipping conditions, supporting steady machining across varying feed and depth parameters. Process reliability and integration in milling operations With tolerance class G and the Walter Tools manufacturing standard, the insert is suitable for automated tool-change systems and repeatable set-ups. The combination of grade and geometry offers a balance between productivity and economy: higher cutting speeds and consistent chip control help to increase material removal rates while maintaining dimensional accuracy. The insert’s specification supports both roughing and semi-finishing strategies where stability and predictable wear behaviour are priorities. For application advice, toolholder matching or to order this Walter Tools insert via Metav Werkzeuge, contact the technical team at Metav Werkzeuge for personalised recommendations and fast delivery coordination Technical Data Article number: XDGT3207200R-D57-WKP35S-WALTER Label: Fräswendeschneidplatte XDGT3207200R-D57 WKP35S Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Designation: XDGT3207200R-D57 WKP35S Dimensions & core data Plate size: 32 Thickness: 07 Corner radius: 2 Clearance angle: 15° Tolerance class: G Materials & special features Coating / Series: Tiger·tec Silver Grade: WKP35S Material suitability: P / K Chipbreaker: D57 Execution: T FAQ What materials is this insert suitable for? The insert is specified for machining steel (P) and cast iron (K); the WKP35S grade and Tiger·tec Silver coating provide abrasion resistance and heat tolerance for these materials. How does the D57 chipbreaker affect performance? The D57 chipbreaker controls chip shape and evacuation, improving swarf management and reducing the risk of built-up edge during medium to heavy milling operations. Which clearance angle does the insert have and why it matters? This insert features a 15° clearance angle, which reduces flank contact, lowers cutting forces and helps maintain surface quality under variable cutting conditions. Is this insert compatible with automated tool-change systems? Yes. The manufacturing tolerance class G and standardised geometry make the insert suitable for repeatable setups and automated tool exchanges in production environments. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XDGT3207200R-D57 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, versatile material capability and stable cutting edges for efficient milling cycles; order the insert directly via Metav Werkzeuge or ask the consultants for application-specific recommendations. XDGT3207200R-D57 WSP45G milling insert, Tiger·tec Gold PVD, R2 — Walter Tools The XDGT3207200R-D57 WSP45G is a robust milling indexable insert designed for general milling of steels, rostfreier Stahl and heat-resistant superalloys, offering a balanced mix of wear resistance and edge stability for high-performance machining. Tiger·tec Gold PVD coating for long tool life Suitable for Stahl, rostfreier Stahl and superalloys 15° relief angle for secure chip evacuation Corner radius R2 for stable cutting edges Reliable performance for mixed-material production The combination of the WSP45G grade and the Tiger·tec Gold coating delivers a marked improvement in wear behaviour and edge stability, which benefits mixed-material production environments. Designed as a PVD-coated carbide grade, this insert supports consistent cutting conditions when machining Stahl, rostfreier Stahl and high-temperature alloys. The result is fewer tool changes, reduced downtime and a predictable machining window that simplifies process planning for production engineers and job shop managers. Secure cutting and consistent chip control Equipped with the D57 chipbreaker geometry and a 15° relief angle, the insert promotes controlled chip formation and reliable evacuation under varying cutting parameters. The moderate corner radius (R2) enhances edge strength without compromising surface finish, making the component suitable for semi-finishing to finishing passes. For operators less familiar with insert geometries: the chipbreaker shapes the swarf so that chips separate cleanly and heat is distributed away from the cutting edge, reducing the risk of built-up edge and premature wear. Operational benefits and application guidance This grade is optimised for milling applications where a balance between toughness and wear resistance is required. The WSP45G sort is specifically intended for versatile milling of unalloyed and alloyed Stahl, rostfreier Stahl and demanding S materials such as nickel-based superalloys and Titan. In practice, the insert supports stable machining at moderate cutting speeds and feeds, and it is recommended where process security and repeatable tool life are priorities. For integration into toolholders, the XDGT geometry and the specified thickness ensure compatibility with common milling cutter bodies. Choose Walter Tools' Tiger·tec Gold inserts for secure, productive milling — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for availability and tailored advice. Technical data Article number: XDGT3207200R-D57-WSP45G-WALTER Label: Fräswendeschneidplatte XDGT3207200R-D57 WSP45G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSP45G ISO designation: XDGT3207200R-D57 WSP45G Facts Relief angle: 15° Corner radius: 2 mm Plate size: 32 mm Thickness: 07 Tolerance class: G Special features PVD-coated carbide grade Tiger·tec Gold Chipbreaker: D57 Execution: T Material applicability: P / M / S Suitable for Stahl, rostfreier Stahl and heat-resistant superalloys (including Titan) FAQ What materials is this insert suitable for? The XDGT3207200R-D57 WSP45G insert is specified for machining Stahl, rostfreier Stahl and heat-resistant superalloys (group S), reflecting the versatile focus of the WSP45G grade. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold PVD coating on the WSP45G grade enhances wear resistance and edge life, resulting in more stable tool performance and fewer indexings in continuous milling operations. Which chipbreaker is included and what is its benefit? This milling insert features the D57 chipbreaker, designed to support controlled chip formation and reliable evacuation, improving surface quality and reducing the likelihood of built-up edge. Is the relief angle suitable for heavy milling? The 15° relief angle provides a balance between cutting engagement and edge security; it is well suited to general milling where process reliability is required rather than extremely heavy roughing. Can this insert be used for finishing passes? Yes — the moderate corner radius R2 and the coating combination make the insert suitable for semi-finishing and finishing applications where stable edges and good surface quality are needed. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
XDGT4009250R-D57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, stable chip control and reliable edge life for consistent milling performance; order the insert directly via Metav Werkzeuge or consult our specialists for cutting data and compatibility advice. XDGT4009250R-D57 WKP35S milling insert, Tiger·tec Silver – Walter Tools The XDGT4009250R-D57 WKP35S is a high-performance milling insert designed for robust machining of steel and cast iron in indexable milling applications Tiger·tec Silver coating for high wear resistance WKP35S grade for stable chip control Optimised for steel and cast iron machining 15° clearance angle for dependable cutting Maximise productivity with advanced coating and grade The combination of Tiger·tec Silver coating and the WKP35S substrate ensures consistent cutting performance in demanding operations. Designed for the thermal and mechanical conditions of machining steel and cast iron, the coating improves resistance to abrasive wear and reduces edge degradation. This leads to longer intervals between insert changes and a noticeable increase in cumulative productivity for serial and batch production. Durable edge geometry for stable surface quality The insert’s 2.5 mm corner radius and 15° clearance angle provide a balance between strength and cutting efficiency. The robust geometry supports a long edge life while helping to maintain consistent workpiece finish. The chipbreaker D57 promotes controlled chip formation during interrupted and continuous milling, reducing the risk of built-up edge and improving dimensional stability of machined components. Practical application and process benefits As an indexable solution within the Tiger·tec Silver series, this insert suits a wide range of cutter bodies and milling strategies. Compliance with ISO 513 material groups for P and K confirms suitability for common steels and cast irons; the insert therefore simplifies tool selection across mixed material programmes. Reduced tool changes and predictable wear behaviour contribute to lower downtime and improved overall process reliability. Why choose this Walter Tools insert for workshop demands Walter Tools’ engineering focus delivers a combination of precise manufacturing and repeatable performance. The XDGT4009250R-D57 WKP35S insert is particularly suited where consistent chip control and extended edge life are priorities. For operations seeking improved cycle times and reproducible surface quality, this indexable insert offers a reliable, production-ready option. Contact Metav Werkzeuge for tailored machining recommendations on Walter Tools inserts such as the XDGT4009250R-D57 WKP35S and request specific cutting data or compatibility checks by email or phone Technical data Article number: XDGT4009250R-D57-WKP35S-WALTER Designation: XDGT4009250R-D57 WKP35S Manufacturer: Walter Tools Numerical data Insert size: 40 Corner radius: 2.5 mm Clearance angle: 15° Thickness: 09 Special features Series: Tiger·tec Silver Grade: WKP35S Chipbreaker: D57 Suitable for: Steel (P) and Cast iron (K) Tolerance class: G Execution: T Material groups: P / K FAQ What materials can this insert machine? The XDGT4009250R-D57 WKP35S insert from Walter Tools is specified for steel (P) and cast iron (K) in accordance with ISO 513, making it suitable for a broad range of ferrous machining tasks. How does the Tiger·tec Silver coating help performance? Tiger·tec Silver on the XDGT4009250R-D57 WKP35S increases resistance to abrasive wear and thermal loading, which extends tool life and maintains cutting edge integrity under higher cutting stresses. What is the benefit of the chipbreaker D57? The D57 chipbreaker on this insert promotes controlled, short chips in both continuous and interrupted milling, improving evacuation and reducing the risk of surface damage and built-up edge. How does the corner radius affect machining outcomes? The 2.5 mm corner radius of the insert enhances edge robustness, supporting longer tool life and a stable surface finish when machining heavier cuts or intermittent engagement. Is this insert compatible with standard indexable milling cutters? The XDGT4009250R-D57 WKP35S is an indexable milling insert designed to fit matching cutter bodies that accept the XDGT geometry; check cutter compatibility before ordering to ensure correct seat and clamping. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XDGT4009250R-D57 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSP45G grade for sustained performance in milling of steel, stainless steel and high-temperature alloys; order via Metav Werkzeuge or consult the technical advisors for application-specific recommendations. XDGT4009250R-D57 WSP45G milling indexable insert — Tiger·tec Gold coating, 15° clearance (Walter Tools) The XDGT4009250R-D57 WSP45G is a coated carbide milling insert engineered for versatile milling applications across steels, stainless steels and heat-resistant alloys. Tiger·tec Gold coating for extended tool life WSP45G grade for P / M / S materials 15° clearance angle for secure chip control 2.5 mm corner radius for stable milling Proven coating technology for longer productive tool life The PVD-based Tiger·tec Gold technology paired with the WSP45G grade provides a balanced combination of wear resistance and toughness. This coating system reduces flank and crater wear under the thermal and mechanical loads typical in milling, helping to maintain a consistent cutting edge over extended cycles. For production environments where predictable tool life and reduced downtime matter, the coated carbide composition offers a clear advantage in repeatable performance and process stability. Stable cutting edge and controlled chip formation for efficient machining Built around a chipbreaker D57 and a generous 2.5 mm corner radius, the geometry promotes stable chip formation and reduces the risk of edge chipping during interrupted cuts. The 15° clearance supports secure engagement and helps to prevent built-up edge on the rake face. Together these features result in improved surface finish and lower scrap rates, as the insert retains edge integrity under varied feeds and depths of cut typical of slotting and face milling operations. Broad material coverage to simplify tool selection Rated for machining groups P / M / S, the grade is suitable for unalloyed and alloyed steels, stainless steel, and heat-resistant superalloys or titanium. This breadth enables consolidation of tool inventories: one insert family can address multiple workpiece materials while maintaining process reliability. The combination of toughness and thermal stability in the grade reduces the need for frequent grade changes and supports consistent dimensional accuracy across mixed production runs. Practical dimensions and tolerance for machine compatibility The insert features an inscribed circle size of 40 mm, thickness code 09 and a tolerance class G, which correspond to common milling pockets and holders. The execution code T and the standardised ISO designation ensure straightforward matching with suitable toolholders. When planning retrofit or new-tool strategies, these dimensional details support quick verification of holder compatibility and clamping stability to achieve repeatable results on CNC milling centres. Contact Metav Werkzeuge for tailored application advice and ordering of Walter Tools inserts — info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: XDGT4009250R-D57-WSP45G-WALTER Product name: Fräswendeschneidplatte XDGT4009250R-D57 WSP45G Manufacturer: Walter Tools SKU: XDGT4009250R-D57-WSP45G-WALTER Facts Inscribed circle: 40 mm Free clearance angle: 15° Corner radius: 2.5 mm Thickness code: 09 Tolerance class: G Special features Series: Tiger·tec Gold Grade: WSP45G (coated carbide) Chipbreaker: D57 Execution: T Material suitability: Steel (P), Stainless steel (M), Superalloys/Titanium (S) FAQ What materials is this insert suitable for? The insert is specified for machining steel, stainless steel and heat-resistant superalloys/titanium (P / M / S); the WSP45G grade and Tiger·tec Gold coating are selected to handle these groups. How does the Tiger·tec Gold coating benefit milling operations? Tiger·tec Gold is a PVD coating system that improves wear resistance and thermal stability, extending tool life and supporting consistent surface finish in continuous production. What does the D57 chipbreaker provide? The D57 chipbreaker promotes controlled chip formation and evacuation, reducing edge loading and supporting stable cutting forces during face and shoulder milling. Which dimensions are important for holder compatibility? The key dimensions are the 40 mm inscribed circle, thickness code 09 and corner radius 2.5 mm; these should match the toolholder pocket and clamping system. Is this insert suitable for interrupted cuts? Yes — the combination of a robust grade, coated carbide substrate and a 2.5 mm corner radius enhances edge stability, making the insert appropriate for many interrupted milling tasks. What does tolerance class G imply? Tolerance class G indicates standardised manufacturing accuracy for consistent fit in matched holders and predictable positioning in assemblies. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the mentioned brands; the offered item is an original, factory-new product of the respective manufacturer.
XDGT4009254R-D57 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a robust 2.5 mm corner radius for stable, repeatable milling of demanding materials; the result is higher process reliability and longer tool life. Order the insert directly via Metav Werkzeuge or ask the consultants for cutting-data recommendations. XDGT4009254R-D57 WSP45G milling insert — Tiger·tec Gold grade, P/M/S application, 15° clearance, Walter Tools XDGT4009254R-D57 WSP45G is a PVD‑coated indexable milling insert designed for demanding milling tasks in steel, stainless steel and heat‑resistant alloys Tiger·tec Gold PVD coating Suitable for steel, stainless and superalloys 15° clearance angle for stable cutting 2.5 mm corner radius for robust edges Consistent wear resistance for productive milling The combination of the Tiger·tec Gold series and the WSP45G grade provides a PVD‑coated carbide chemistry engineered for wear resistance and edge stability. This makes the insert particularly suited to milling operations where tool life and repeatability matter. The coating technology supports lower flank wear under cyclic thermal loads, which translates into fewer tool changes and less unplanned downtime. The result is an efficient production flow with predictable tool performance. Reliable chip control across difficult materials Designed with chipbreaker D57, the insert promotes consistent chip formation when machining a range of workpiece groups. The grade is specified for ISO material groups P (steel), M (stainless steel) and S (superalloys and titanium), meaning it tolerates the heat and work‑hardening tendencies typical of these materials. The chip geometry and the coated grade work together to reduce built‑up edge and avoid unstable cutting conditions, supporting improved surface finishes and stable machining cycles. Robust geometry that protects the cutting edge Geometry details are chosen for a balance of strength and cutting efficiency: the corner radius 2.5 mm gives a sturdy edge that resists chipping under interrupted cuts, while the 15° clearance angle helps maintain effective shear and avoid rubbing. The insert has a 40 mm nominal size and a thickness code of 09, providing a solid contact area for secure clamping in indexable milling setups. Together, these features yield repeatable dimensional accuracy and longer service intervals in serial production. Easy integration and production benefits As an indexable milling insert from Walter Tools, this grade supports productive machining strategies where reliability and process security are priorities. The coated grade and geometry reduce the frequency of tool changes and help maintain consistent part quality over longer runs. For process planners, the insert offers a clear benefit in balancing cutting performance with predictable maintenance intervals, helping to streamline scheduling and lower per‑part manufacturing costs. Contact Metav Werkzeuge today for application-specific cutting data and availability of Walter Tools inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data SKU: XDGT4009254R-D57-WSP45G-WALTER Article designation: XDGT4009254R-D57 WSP45G Product type: milling insert (indexable milling insert) Series: Tiger·tec Gold Grade: WSP45G Manufacturer: Walter Tools Facts Plate size: 40 mm Corner radius: 2.5 mm Clearance angle: 15° Thickness code: 09 Tolerance class: G Chipbreaker: D57 Special features PVD-coated carbide grade WSP45G Suitable for steel (P), stainless steel (M) and superalloys/titanium (S) Robust edge geometry for interrupted cuts Designed for productive milling applications Style/designation: T FAQ What materials is this insert intended for? The XDGT4009254R-D57 WSP45G milling insert from Walter Tools is specified for ISO groups P, M and S — steel, stainless steel and heat‑resistant superalloys/titanium. What does the WSP45G designation indicate? WSP45G denotes Walter’s coated carbide grade within the Tiger·tec Gold family; it is a tough, versatile PVD grade tailored for milling applications requiring stable edge life. How does the chipbreaker D57 influence machining? The chipbreaker D57 promotes controlled chip formation and evacuation, supporting smoother cutting and reduced build‑up on the cutting edge when machining the specified material groups. What benefits does the 2.5 mm corner radius provide? A 2.5 mm corner radius offers enhanced edge strength for interrupted cuts and helps extend tool life while maintaining acceptable surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XDMT1303079R-F55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating, the F55 chipbreaker and a compact 0.7 mm corner radius for reliable, versatile milling of steel, stainless steel and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or ask our consultants for application support. XDMT1303079R-F55 WSP45G indexable milling insert — Tiger·tec Gold, Walter Tools A XDMT1303079R-F55 WSP45G indexable milling insert designed for productive milling of steel, stainless steel and superalloys, offering stable chip control and a balanced edge for finishing and light roughing operations Tiger·tec Gold PVD-coated grade WSP45G Optimised F55 chipbreaker for stable chips 15° relief angle for secure cutting performance 0.7 mm corner radius for improved surface finish High-performance coating for extended productivity The combination of the Tiger·tec Gold coating and the WSP45G grade provides a wear-resistant surface that supports longer tool life under cyclic thermal loads. The PVD-based coating reduces friction at the cutting edge and improves heat resistance, which results in more consistent performance when machining steel and stainless steel. By lowering edge wear, the coated grade helps maintain dimensional accuracy over longer production runs, translating into fewer tool changes and reduced downtime for the workshop. Controlled chip formation that stabilises the process Equipped with an F55 chipbreaker, the insert secures controlled chip formation across a range of feeds and depths of cut. The chipbreaker geometry is optimised for interrupted and continuous cuts typically encountered in milling, aiding swarf evacuation and reducing the risk of built-up edge on tougher materials. This controlled chip flow supports higher material removal rates and steadier surface quality, making the insert suitable for both roughing stages where stability matters and light finishing passes where surface integrity is required. Geometry tuned for reliable edge strength and finish A 15° relief angle combined with a 0.7 mm corner radius balances cutting edge strength and the ability to achieve fine surface finishes. The relief angle reduces rubbing behind the cutting edge, which helps maintain a sharp cutting action, while the modest corner radius provides robustness against chipping during intermittent engagement. Together these geometric choices make the insert a versatile component in mixed-production environments where a single grade must handle varying workpiece materials and operational demands. Broad material suitability for shop-floor flexibility The carbide grade is optimised for the ISO groups P, M and S, which correspond to unalloyed and alloyed steel, stainless steel and heat-resistant superalloys or titanium respectively. This universality reduces the need to change insert types between workpieces and enables leaner tooling inventories. In practice, the specification supports a wide range of components from structural steel parts to more demanding, heat-prone alloys, offering workshops the flexibility to standardise on a single high-performance insert for diverse milling tasks. Integration into production and practical benefits The insert’s compact dimensions and standard geometry make it straightforward to integrate into common milling cutter bodies. With a tolerance class M and the Walter Tools quality standards, users can expect reproducible seating and repeatable cutting behaviour from insert to insert. The overall result is a reliable, cost-effective tooling solution that supports consistent process planning, easier spindle load calculation and predictable maintenance intervals — all contributing to measurable improvements in shop productivity. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts and secure procurement at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: XDMT1303079R-F55-WSP45G-WALTER SKU: XDMT1303079R-F55-WSP45G-WALTER Product type: indexable milling insert Brand: Walter Tools Grade: WSP45G Series: Tiger·tec Gold Facts Relief angle: 15° Corner radius: 0.7 mm Plate size: 13 Chipbreaker: F55 Plate thickness: 03 Tolerance class: M Execution: T Special features PVD-coated cemented carbide grade Material applicability: Steel (P), Stainless steel (M), Superalloys/Titanium (S) Suited for interrupted and continuous milling Balanced geometry for finishing and light roughing Stable edge for extended tool life FAQ What materials can this insert machine effectively? The XDMT1303079R-F55 WSP45G insert by Walter Tools is formulated for steel (P), stainless steel (M) and superalloys/titanium (S), giving broad applicability across common industrial materials. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the Walter Tools insert reduces friction and improves thermal resistance, which helps to extend tool life and maintain dimensional stability in continuous production. Which cutting scenarios suit the F55 chipbreaker? The F55 chipbreaker is optimised for controlled chip formation in both interrupted and continuous milling, supporting stable cutting when machining variable geometries or mixed production batches. Is the geometry suitable for finishing passes? Yes; the 15° relief angle and 0.7 mm corner radius provide a balance between edge strength and the capability to achieve good surface finishes in finishing operations. Can this insert reduce tooling inventory in mixed-production shops? Because the WSP45G grade supports ISO groups P, M and S, the insert allows consolidation of tooling for multiple material classes, helping reduce inventory complexity. Manufacturer/Responsible: Walter Tools (Walter Deutschland GmbH); Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
XDMT1303080R-F55 WKP25S Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Silver coating and the WKP25S grade for robust, high‑productivity milling of steel and cast iron; the 15° clearance and 0.8 mm corner radius ensure a consistent surface finish and reliable cutting performance. Order the XDMT1303080R‑F55 WKP25S directly via Metav Werkzeuge or consult our specialists for application guidance. XDMT1303080R‑F55 WKP25S milling indexable insert – Tiger‑tec Silver, 15° clearance (Walter Tools) A XDMT1303080R‑F55 WKP25S insert engineered for productive machining of steel and cast iron with Tiger‑tec Silver coating. Tiger‑tec Silver coating for improved wear resistance WKP25S coated carbide grade for steel and cast iron 15° clearance for stable cutting geometry 0.8 mm corner radius for consistent surface finish Productive machining across steel and cast iron The WKP25S grade, integrated in the Tiger‑tec Silver series, is optimised for machining both steel (P) and cast iron (K). The combination of a coated carbide substrate and the series’ coating technology delivers improved resistance to abrasive wear and thermal loads typical in turning and milling of these materials. This results in longer edge life and predictable tool change intervals, which supports high‑volume production and lowers machining costs per part. Geometry that secures surface quality and process stability A relief angle of 15° and a 0.8 mm corner radius create a geometry that balances edge strength with surface integrity. The moderate clearance reduces rubbing while maintaining a stable cutting action, and the rounded corner helps to distribute cutting forces to avoid premature chipping. With tolerance class M and a nominal plate size of 13 mm, the insert provides a reliable fit and repeatable results in standard toolholders, supporting consistent part quality in series production. Coating and chip control for efficient material removal The Tiger‑tec Silver coating provides a combination of thermal and chemical resistance that is particularly effective when machining demanding workpieces. The integrated chipbreaker F55 is designed to promote controlled chip formation and evacuation when cutting steel and cast iron, reducing interruption from entangling chips and improving surface finish. As a coated carbide cutting element, the insert is suited to applications where a balance of wear resistance and toughness is required. Application focus and production advantages Designed for shopfloor reliability, this insert supports a wide range of general milling tasks in industrial environments. The specification emphasises process security and predictable tool life—both decisive for minimising downtime and maximising throughput. Where repeatable geometry and consistent edge behaviour are priorities, the combination of WKP25S grade and Tiger‑tec Silver coating contributes to stable machining cycles and improved overall productivity in component manufacturing. Contact Metav Werkzeuge for targeted cutting recommendations on the Walter Tools XDMT1303080R‑F55 WKP25S insert or to request detailed machining data and stocking information Technical data Article number: XDMT1303080R‑F55‑WKP25S‑WALTER Designation: XDMT1303080R‑F55 WKP25S Product type: milling indexable insert Manufacturer: Walter Tools UID: XDMT1303080R‑F55‑WKP25S‑WALTER Core specifications Clearance angle: 15° Corner radius: 0.8 mm Plate size: 13 mm Thickness code: 03 Tolerance class: M Special features Coating / Series: Tiger‑tec Silver Grade: WKP25S Material suitability: Steel (P), Cast iron (K) Chipbreaker: F55 Execution: T FAQ Is this insert suitable for machining both steel and cast iron? Yes. The XDMT1303080R‑F55 WKP25S is specified for steel and cast iron (P/K) and the WKP25S grade is optimised for those material groups. What does the WKP25S grade indicate? WKP25S denotes a Walter Tools coated‑carbide grade in the Tiger‑tec Silver family, selected for a combination of wear resistance and toughness in standard milling applications. How does the 15° clearance influence performance? A 15° clearance angle reduces flank contact and rubbing while maintaining cutting stability, helping to extend tool life and preserve surface finish during milling. When is the F55 chipbreaker beneficial? The F55 chipbreaker is designed to promote reliable chip formation and evacuation when machining common steels and cast irons, improving process reliability and surface quality. What is the exact designation and SKU for ordering? The ISO designation is XDMT1303080R‑F55 WKP25S and the SKU is XDMT1303080R‑F55‑WKP25S‑WALTER. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and imply no affiliation between our company and the named brands. The offered item is an original, brand‑new product from the manufacturer (Walter Tools).
XDMT1303080R-F55 WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKP35S grade together with the F55 chipbreaker for consistent chip control and longer cutting edge life; order the insert through Metav Werkzeuge or request application guidance from our consultants for an efficient machining setup. XDMT1303080R-F55 WKP35S — milling indexable insert for steel & cast iron (Walter Tools) A XDMT1303080R-F55 WKP35S milling insert designed for robust performance in steel and cast iron machining, combining a coated carbide grade with a proven chipbreaker geometry for stable, productive cutting. Tiger·tec Silver coating technology WKP35S grade for steel and cast iron 15° relief angle for stable cutting 0.8 mm corner radius for edge strength Consistent chip control and extended tool life The combination of the Tiger·tec Silver coating and the WKP35S grade provides reliable resistance to abrasive wear and thermal loads typical of machining steel and cast iron. The integrated F55 chipbreaker is tuned to produce short, controllable chips during interrupted and continuous milling, which reduces the risk of built-up edge and improves process stability. As a result, tool change frequency can be reduced and reproducible surface quality achieved with fewer interventions, supporting continuous production and lower per-part machining costs. Precision geometry for repeatable results Geometry plays a decisive role in repeatability: the 15° relief angle and 0.8 mm corner radius offer a balanced compromise between cutting-edge strength and dimensional accuracy. The insert is manufactured to tolerance class M, which ensures consistent fit and interchangeability in toolholders designed for this series. These characteristics support stable cutting forces, predictable deflection behaviour and consistent component tolerances across batch production, enabling precise machining even under varying cutting conditions. Productivity advantages and application scope Built for demanding milling tasks, the grade and coating combination delivers high process reliability and a broad material capability, covering the ISO groups for steel (P) and cast iron (K). This makes the insert suitable for a wide variety of roughing and semi-finishing operations where controlled chip formation and edge stability are essential. Choosing this insert supports higher metal removal rates and consistent surface finish, translating into tangible productivity gains and lower total machining cost per component while maintaining quality standards associated with Walter Tools. For machining applications that demand consistent performance from the Tiger·tec Silver grade, contact Metav Werkzeuge for tailored advice and procurement via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: XDMT1303080R-F55-WKP35S-WALTER Designation: XDMT1303080R-F55 Full designation: XDMT1303080R-F55 WKP35S Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 0.8 mm Inscribed circle / size: 13 mm Thickness code: 03 Special features Grade: WKP35S Series: Tiger·tec Silver Chipbreaker: F55 Material suitability: Steel (P) and Cast iron (K) Tolerance class: M Execution: T FAQ What materials is this insert suitable for? The insert is suitable for machining steel and cast iron; the WKP35S grade in the Tiger·tec Silver series is optimised for these ISO material groups. How does the F55 chipbreaker improve machining? The F55 chipbreaker promotes short, consistent chips and improved chip control, which helps maintain a stable cutting process and prolongs cutting edge life. What does the 15° relief angle mean for cutting performance? A 15° relief angle reduces rubbing on the flank face and contributes to stable cutting forces, supporting accurate dimensions and consistent surface finish in milling operations. Is the corner radius relevant for finishing or roughing? The 0.8 mm corner radius increases edge strength, making the insert suitable for robust cutting and light finishing, depending on the chosen parameters and machine stability. What tolerance and repeatability can be expected? Manufactured to tolerance class M, the insert ensures reliable fit and repeatable seating in compatible toolholders, aiding consistent part quality across production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered product names are used solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original, brand-new merchandise of the manufacturer.
XDMT1303080R-F55 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WSM35G grade and the F55 chipbreaker for stable chip control and prolonged service life; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. XDMT1303080R-F55 WSM35G milling indexable insert, Tiger·tec Gold, Walter Tools The XDMT1303080R-F55 WSM35G is a coated carbide milling insert designed for heavy-duty milling of rostfreier Stahl and heat‑resistant superalloys, providing wear resistance and process stability in demanding applications. Tiger·tec Gold coating for enhanced tool life Grade WSM35G for rostfreier Stahl and superalloys F55 chipbreaker for reliable chip control 15° relief with 0.8 mm corner radius Longer tool life and reliable cutting on difficult materials The combination of Tiger·tec Gold coating and the WSM35G grade results in a coated carbide structure that emphasises heat resistance and abrasion protection. This technology supports stable edge condition under high thermal load and reduces flank wear, which in turn lengthens the time between indexings and tool changes. For machining rostfreier Stahl and other tough alloys, the insert’s design promotes consistent chip formation and reduced risk of built-up edge, which benefits cycle stability and lowers overall process cost. Precise chip control and improved surface quality Equipped with the F55 chipbreaker and a defined geometry, the insert secures predictable chip breaking and evacuation during milling operations. The geometry, featuring a 15° relief and a 0.8 mm corner radius, balances edge strength with cutting performance: the relief angle reduces rubbing and heat generation, while the corner radius enhances resistance to edge chipping and helps achieve a smoother finished surface. These features translate into fewer rejects and a more consistent part quality in series production. Designed for productivity and process security This indexable insert is engineered for applications where process reliability matters. The substrate and coating combination supports sustained cutting at elevated temperatures typical of rostfreier Stahl and superalloys, meaning tool life is extended and machine uptime is improved. The insert’s predictable wear behaviour simplifies tool life forecasting and inventory planning, which is especially valuable in production environments that prioritise repeatable output and minimal downtime. Selection and application guidance for milling operations Marked for material groups S / M and belonging to the Tiger·tec Gold series, the insert is suited to roughing and semi‑finishing strategies where robust edge stability is required. When selecting cutting parameters, workpiece clamping and machine rigidity should be aligned with the insert’s capabilities to fully exploit its advantages. For assistance in adapting feeds, speeds and holder selection to specific machining tasks, Metav Werkzeuge’s technical team can provide targeted recommendations to optimise throughput and surface finish. Discuss application-specific recommendations for Walter Tools Tiger·tec Gold inserts with Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com to ensure the best cutting solution for rostfreier Stahl and superalloy tasks Technical data Article number: XDMT1303080R-F55-WSM35G-WALTER Designation: XDMT1303080R-F55 ISO designation: XDMT1303080R-F55 WSM35G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSM35G Execution: T Facts Relief angle: 15° Corner radius: 0.8 mm Plate size: 13 Plate thickness code: 03 Tolerance class: M Special features Chipbreaker: F55 Material groups: S / M Suitable for rostfreier Stahl Coated carbide (Tiger·tec Gold) Stable chip formation and wear resistance FAQ Which materials is this insert suitable for? The XDMT1303080R-F55 WSM35G insert from Walter Tools is specified for rostfreier Stahl and heat‑resistant superalloys (material groups M and S) according to its grade and series. What are the key geometry values of the insert? The insert features a relief angle of 15° and a corner radius of 0.8 mm, combined with the F55 chipbreaker to support chip control and edge strength. What does the WSM35G grade offer in practice? WSM35G, part of the Tiger·tec Gold family, delivers enhanced heat resistance and stable cutting edges for heavy milling tasks on difficult‑to‑machine materials. Is the insert intended for finishing or roughing applications? Depending on holder and cutting data, the insert is suitable for roughing and semi‑finishing where robust edge stability and reliable chip control are required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names remain the property of their respective owners. The mentioned brand names are used for explanatory purposes only and do not imply any affiliation between our company and the manufacturers.
XDMT1303080R-F55 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, versatile WSP45G grade and the F55 chipbreaker for reliable chip control and extended tool life; these features support efficient production and consistent surface quality. Order the insert directly via Metav Werkzeuge or ask our consultants for tailored application advice. XDMT1303080R-F55 WSP45G milling insert — Walter Tools, 15° free angle, F55 chipbreaker XDMT1303080R-F55 WSP45G is a milling insert engineered for versatile finishing and semi‑roughing of steel, stainless steel and heat‑resistant alloys Tiger‑tec Gold PVD coating Versatile P/M/S machining capability 15° free angle for stable cutting F55 chipbreaker for controlled chips Increase throughput with a durable, all‑round grade The WSP45G grade from the Tiger‑tec Gold range provides a resilient, PVD‑coated carbide substrate that is optimised for milling of a wide range of materials. Its combination of wear‑resistant coating and toughness enables consistent productivity, especially in mixed‑material production runs. For manufacturers seeking fewer tool changes and predictable process windows, this grade reduces unscheduled stoppages and supports higher machine utilisation. Reliable chip control and surface quality from geometry The insert’s F55 chipbreaker and a 15° free angle promote controlled chip formation and evacuation under varying feeds and cutting depths. A 0.8 mm corner radius balances edge strength with the ability to generate good surface finish, reducing the need for additional finishing operations. In practical terms, the geometry lowers the risk of built‑up edge and supports stable cutting forces, which translates into more predictable tool life and repeatable part quality. Wide material coverage and application guidance Designed for machining steel, stainless steel and superalloys/titanium, the insert suits both finishing and semi‑roughing tasks where heat and toughness challenge the cutting edge. The tolerance class M and robust execution make it appropriate for production environments requiring reproducible results. For customers unsure about parameter settings, Metav Werkzeuge offers application support to determine suitable speeds, feeds and depths for this insert in specific machines and materials. Contact Metav Werkzeuge for bespoke application advice and ordering of Walter Tools Tiger‑tec Gold inserts — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the right setup for the production task Technical Data Article number: XDMT1303080R-F55-WSP45G-WALTER Designation: XDMT1303080R-F55 WSP45G Facts Corner radius: 0.8 mm Free angle: 15° Insert size: 13 mm Thickness code: 03 Tolerance class: M Special features Tiger‑tec Gold series Grade: WSP45G (PVD‑coated carbide) Chipbreaker: F55 Material suitability: steel, stainless steel, superalloys/titanium Execution: T FAQ What materials can this insert machine effectively? The XDMT1303080R‑F55 WSP45G insert from Walter Tools is intended for machining steel, stainless steel and heat‑resistant alloys, offering a broad ISO 513 material coverage (P/M/S). How does the F55 chipbreaker affect performance? The F55 chipbreaker on the Walter Tools milling insert promotes controlled chip formation and evacuation, improving surface finish and reducing cutting‑edge stress during milling. Is the insert suitable for both finishing and semi‑roughing? Yes, the WSP45G grade and the geometry of the XDMT1303080R‑F55 support finishing and semi‑roughing operations where a balance of edge stability and surface quality is required. What does the Tiger‑tec Gold coating provide? Tiger‑tec Gold coating increases wear resistance and thermal stability of the carbide, extending tool life and enabling more consistent cutting performance across a range of materials. What does tolerance class M indicate for production use? Tolerance class M denotes standardised dimensional accuracy appropriate for many production setups; it supports repeatable seating and stable performance in tool holders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XDMT16T3095R-F55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the robust chipbreaker F55 to reduce tool changes and achieve consistent surface quality on demanding materials; the 15° relief and 0.9 mm corner radius provide reliable edge stability. Order the insert directly via Metav Werkzeuge or consult the team for application advice. XDMT16T3095R-F55 XDMT16T3095R-F55 WSP45G — milling insert for P, M and S applications (Walter Tools) XDMT16T3095R-F55 WSP45G is a Tiger‑tec Gold milling insert designed for a wide range of milling tasks in steel, stainless steel and heat‑resistant alloys Tiger‑tec Gold PVD coating for edge stability Suitable for steel, stainless and superalloys 15° relief angle for secure chip flow 0.9 mm corner radius for robust engagement Consistent cutting performance through optimised coating and geometry The insert combines the Tiger‑tec Gold coating with a coated‑carbide substrate to deliver stable cutting edges and improved wear resistance. This configuration supports steady performance during interrupted cuts and high thermal loads, so cycle times can be reduced without sacrificing surface finish. The integrated chipbreaker F55 promotes controllable chip formation, which lowers the risk of built‑up edge and helps maintain tool life. Broad material capability reduces tool inventory and simplifies planning Designed for the ISO groups P/M/S, the tool suits unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys including titanium. The result is fewer tool changes and simplified tool management when workshops handle mixed batches or prototypes. Technical choices such as the PVD coating and the insert’s toughness support reliable chip control in materials that typically generate high temperatures or tend to produce stringy chips. Geometry that improves engagement and process security Key geometry features include a 15° relief angle and a 0.9 mm corner radius, combined with a 16 mm plate size and T3 thickness. These design elements provide a balance between strength and cutting accessibility: the relief angle assists chip evacuation, while the corner radius increases resistance to chipping during heavier cuts. The insert’s tolerance class M ensures repeatable seating and stable performance across tool holders, contributing to predictable machining results and less downtime. For precise milling with Tiger‑tec Gold technology and to discuss suitable cutting parameters, contact Metav Werkzeuge for tailored application support and availability. Technical data Article number: XDMT16T3095R-F55-WSP45G-WALTER Manufacturer: Walter Tools Product type: Fräswendeschneidplatte / milling insert Series: Tiger‑tec Gold Sort: WSP45G Facts Tolerance class: M Relief angle: 15° Corner radius: 0.9 mm Plate size: 16 mm Thickness: T3 Special features Chipbreaker: F55 Coating: Tiger‑tec Gold (PVD) Material class: P / M / S Coated carbide insert Versatile for milling applications FAQ What materials can this insert machine reliably? The insert is specified for ISO groups P, M and S, so it is suitable for machining steel, stainless steel and heat‑resistant superalloys such as titanium when using the proper cutting data and setup. How does the Tiger‑tec Gold coating affect tool life? The Tiger‑tec Gold coating increases wear resistance and thermal stability of the cutting edge on the insert, which typically extends tool life and contributes to consistent surface quality under higher cutting temperatures. Which geometric features contribute to process security? The combination of a 15° relief angle and a 0.9 mm corner radius provides better edge strength and chip control; together with the chipbreaker F55, these features reduce the likelihood of chipping and help maintain stable machining. Is this insert suitable for interrupted milling? Yes; the coated‑carbide substrate and robust geometry of the insert are designed to withstand the stresses of interrupted cuts, provided machining parameters are adjusted accordingly. What is the exact designation to order? Order using the SKU XDMT16T3095R-F55-WSP45G-WALTER or the ISO designation XDMT16T3095R-F55 WSP45G to ensure the correct Tiger‑tec Gold insert is supplied. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarks and product names are the property of their respective owners. Brand names and registered trademarks are used for identification and explanation only. There is no affiliation between our company and the trademark owners. The offered item is an original, factory‑new product of the manufacturer.
XDMT16T3100R-F55 WKP25S Wendeplatten - Walter Tools
Take advantage of high process reliability and broad material capability combined with precise chip control for consistent production results; the combination of the Tiger·tec Silver coating and the WKP25S grade delivers durable edge life and predictable wear. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. XDMT16T3100R-F55 WKP25S Fräswendeschneidplatte for steel and cast iron — Walter Tools XDMT16T3100R-F55 WKP25S is a precision milling insert designed for efficient machining of steel and cast iron in production environments Tiger·tec Silver coating for extended tool life WKP25S grade optimised for P and K materials 15° clearance angle for stable cutting geometry 1 mm corner radius for robust edge strength Consistent edge life through advanced coating technology The combination of the Tiger·tec Silver coating and the WKP25S substrate produces a wear-resistant surface that reduces flank and crater wear under typical workpiece temperatures. This results in longer tool life and fewer insert changes, which supports uninterrupted production cycles. The coated carbide technology stabilises the cutting edge and mitigates adhesive wear mechanisms common when machining unalloyed and alloyed steel. Predictable chip formation and better surface finishes The F55 chipbreaker geometry has been developed to manage the characteristic chips of steels and cast irons under a range of cutting conditions. By controlling chip flow and breakage, the insert reduces the risk of re-cutting chips and improves process security. The result is a more consistent surface quality and reduced downstream cleaning or rework — an advantage when repeatability and finish are critical. Robust geometry for heavy-duty milling operations The insert’s 1 mm corner radius and 15° clearance angle deliver a balance between edge strength and cutting stability. The modest corner radius absorbs intermittent loads and supports roughing operations, while the clearance angle helps maintain a defined cutting point to reduce rubbing. The T3 plate thickness and M tolerance class ensure compatibility with standard toolholders and predictable runout behaviour in serial production. Broad material coverage and application clarity Designed for the ISO groups P (steel) and K (cast iron), the grade WKP25S is suitable for a variety of workpiece alloys, offering flexibility across mixed-production lots. The insert’s specification supports both finishing and semi-finishing tasks depending on cutting parameters and machine stability. For users less familiar with carbide grades: the designation indicates a coated hardmetal intended for balanced wear resistance and toughness. Practical fit for shop-floor logistics and planning With the standardised designation and compatible geometry, the insert integrates into common Walter Tools tool systems and can be stocked efficiently for predictable replenishment. The clear identification and series marking simplify process documentation and tool management. Where cutting data optimisation is required, the combination of grade, chipbreaker and geometry enables straightforward parameter tuning to balance productivity and tool life. Contact Metav Werkzeuge for availability, recommended cutting data and stock details at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav Werkzeuge will advise on the best setup for the intended application Technical data SKU: XDMT16T3100R-F55-WKP25S-WALTER Designation: XDMT16T3100R-F55 WKP25S Product type: Fräswendeschneidplatte Numbers / core technical data Corner radius: 1 mm Clearance angle: 15° Plate size: 16 Thickness: T3 Tolerance class: M Materials & features Coating / series: Tiger·tec Silver Grade: WKP25S Chipbreaker: F55 Material compatibility: steel (P), cast iron (K) Execution: T Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The XDMT16T3100R-F55 WKP25S insert from Walter Tools is suitable for ISO material groups P (steel) and K (cast iron), offering balanced performance across unalloyed and alloyed steels as well as typical cast iron grades. How does the Tiger·tec Silver coating help performance? The Tiger·tec Silver coating improves wear resistance and heat management on the cutting edge, which extends service life of the WKP25S grade under the elevated temperatures common when machining steel and cast iron. What role does the F55 chipbreaker play in machining? The F55 chipbreaker shapes and breaks chips reliably during milling, reducing the chance of long stringy chips and improving surface finish; this makes tool management and swarf handling easier in serial production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Mention of brand names is for identification and explanatory purposes only; no affiliation between our company and the named manufacturers is implied. The offered item is an original, brand-new product from the manufacturer.
XDMT16T3100R-F55 WKP35S Wendeplatten - Walter Tools
High-performance WKP35S Tiger·tec Silver grade combined with a robust F55 chipbreaker and a 15° clearance delivers productive, repeatable milling in steel and cast iron; order the insert directly via Metav Werkzeuge or request advice from their consultants. XDMT16T3100R-F55 WKP35S milling insert (for steel & cast iron) — Walter Tools The XDMT16T3100R-F55 WKP35S is a coated carbide milling insert designed for efficient roughing and medium finishing in steel and cast iron applications. Tiger·tec Silver coated carbide grade WKP35S Optimised for steel and cast iron machining 15° clearance angle for stable cutting 1 mm corner radius, size 16, chipbreaker F55 Boosted productivity through coated-grade performance The Tiger·tec Silver WKP35S grade combines a wear-resistant coating with a tough carbide substrate to extend tool life under typical steel and cast iron cutting conditions. This results in more consistent machining cycles and fewer insert changes, which improves overall process throughput. The combination of a dedicated chipbreaker F55 and a coated grade designed for groups P (steel) and K (cast iron) ensures reliable chip control and reduced risk of edge chipping even in interrupted cuts. For planners and production engineers, this translates into predictable tool-change intervals and more stable cycle times. Geometry and edge design for consistent surface quality The insert’s 15° clearance angle and 1 mm corner radius support secure cutting engagement and even flank wear, helping to maintain component tolerances throughout a production run. A tolerance class of M and a plate thickness of T3 contribute to dimensional stability and repeatable seating in tool holders. The built-in chipbreaker F55 is engineered to shape and evacuate chips effectively, lowering cutting forces and improving surface finish on cast components and alloyed steels. For users less familiar with insert geometry: the corner radius influences surface finish and strength of the cutting edge, while the clearance angle affects how the tool enters the material and deflects heat. Application fit and process reliability Specified as suitable for ISO groups P (steel) and K (cast iron), this insert is intended for a wide range of production environments where dependable performance and good chip formation are required. The combination of a modern coating system and a robust substrate supports both productivity and repeatability, making it appropriate for serial machining as well as job-shop operations that demand flexibility. The design helps to reduce unscheduled downtime and supports consistent part quality, thereby contributing to lower overall production costs and improved customer satisfaction. Contact Metav Werkzeuge today for tailored recommendations on tool holders and parameters for Walter Tools inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: XDMT16T3100R-F55-WKP35S-WALTER Article name: Fräswendeschneidplatte XDMT16T3100R-F55 WKP35S Walter Tools Manufacturer: Walter Tools Product type: milling insert Series: Tiger·tec Silver Facts Clearance angle: 15° Corner radius: 1 mm Plate size: 16 mm Thickness: T3 Tolerance class: M Special features Grade: WKP35S (coated carbide) Chipbreaker: F55 Suitable for: steel (P) and cast iron (K) Execution: T Sorten- und Serienbeschreibung: coated carbide grade in Tiger·tec Silver series FAQ What materials is this insert suitable for? The insert is designed for ISO material groups P and K, meaning it is suitable for machining steel and cast iron with the WKP35S grade. How does the chipbreaker F55 benefit production? The F55 chipbreaker supports controlled chip formation and evacuation, reducing cutting forces and improving surface finish, particularly in interrupted cuts and mixed-material batches. What does the 1 mm corner radius mean for component finish? A 1 mm corner radius provides a balance between edge strength and surface finish; it helps to achieve a robust cutting edge while maintaining acceptable surface quality for many general milling tasks. Walter Tools is a brand of Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XDMT16T3100R-F55 WSM35G WSM35G Wendeplatten - Walter Tools
High thermal stability from the Tiger‑tec Gold coating together with the WSM35G grade and the F55 chipbreaker provide secure edge life and reliable chip control in machining stainless steel and superalloys; take advantage of durable performance and consistent surface quality. Order the XDMT16T3100R‑F55 WSM35G milling insert directly via Metav Werkzeuge or contact our consultants for tailored advice. XDMT16T3100R-F55 WSM35G milling insert by Walter Tools — Tiger‑tec Gold, for stainless steel and superalloys XDMT16T3100R-F55 WSM35G is a precision milling insert designed for heavy-duty and demanding applications, optimised to deliver process security when machining stainless steel and heat‑resistant superalloys. Tiger‑tec Gold coating for thermal stability WSM35G grade for tough alloys and stainless steel 15° clearance angle for secure edge engagement F55 chipbreaker for controlled chip formation Consistent productivity through a high‑temperature coating The combination of the Tiger‑tec Gold coating and the WSM35G carbide composition is engineered to resist thermal degradation and maintain a stable cutting edge under elevated temperatures. This results in fewer interruptions for insert changes and more predictable tool life, which is particularly relevant when working with materials that generate heat and tend to work‑harden. For production environments the direct benefit is reduced machine downtime and improved component throughput, supported by the insert’s ability to sustain cutting forces without premature edge failure. Reliable chip control and surface quality for difficult alloys The F55 chipbreaker is tuned to the insert geometry to produce short, controllable chips in materials that are notorious for long, stringy swarf. Controlled chip formation reduces the risk of recutting and scratching, improving the finished surface and protecting fixtures and toolholders. Combined with a 15° clearance angle and a corner radius of 1 mm, this insert balances strength and cutting smoothness, enabling stable engagement at varied depths of cut while preserving component tolerances and surface finish. Application spectrum and material suitability explained Marked as suitable for material groups S / M, the insert is intended for superalloys/titanium (S) and stainless steel (M). Superalloys and stainless steel demand tools that manage heat and resist edge chipping; the WSM35G grade is formulated for these conditions, emphasising thermal resistance and consistent chipbreaking. For users less familiar with industrial designations: S denotes heat‑resistant, high‑strength alloys, while M refers to steels with high corrosion resistance—both classes benefit from coatings and grades that prevent rapid wear and maintain geometry at high cutting temperatures. Secure integration into machining systems and economic impact With a plate size of 16 mm and thickness specification T3, the insert fits standard toolholders matching its ISO designation and ensures straightforward replacement cycles. The robust construction and optimised chip control translate into predictable tool life, which simplifies process planning and cost accounting. Over time, the combination of fewer tool changes, improved first‑pass yields and consistent surface quality contributes to measurable efficiency gains on the shop floor, reinforcing production stability and reducing per‑part processing variability. Contact Metav Werkzeuge today to discuss how the Walter Tools XDMT16T3100R‑F55 WSM35G insert can increase process reliability in stainless steel and superalloy machining — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: XDMT16T3100R-F55-WSM35G-WALTER ISO designation: XDMT16T3100R-F55 WSM35G Grade: WSM35G Series: Tiger‑tec Gold Facts Clearance angle: 15° Corner radius: 1 mm Plate size: 16 mm Thickness: T3 Tolerance class: M Special features Chipbreaker: F55 Applicable materials: S / M Typical applications: stainless steel, superalloys and titanium Execution/type: T FAQ What materials is this insert best suited for? The XDMT16T3100R‑F55 WSM35G insert is designed for machining stainless steel and heat‑resistant superalloys (S / M), using the WSM35G grade and Tiger‑tec Gold coating to manage heat and preserve the cutting edge. How does the Tiger‑tec Gold coating benefit production runs? Tiger‑tec Gold increases thermal resistance and wear performance, helping the WSM35G insert maintain edge stability over longer runs and reducing the frequency of replacements in high‑temperature cutting. What is the purpose of the F55 chipbreaker? The F55 chipbreaker promotes controlled, short chips that reduce recutting and improve surface finish; it also lowers the risk of chip entanglement in operations with superalloys or stainless steel. Is the 15° clearance angle suitable for heavy engagement cuts? Yes; the 15° clearance angle on this insert is a compromise between strength and clearance, supporting secure edge engagement while helping to avoid rubbing and excessive flank wear under moderate to heavy depths of cut. Can this insert be used in standard toolholders for 16 mm plates? The insert’s 16 mm plate size and T3 thickness correspond to common holder standards for this ISO designation; compatibility should be verified against the specific holder catalogue and clamping system. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XDMT16T3100R-F55 WSP45G F55 Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating and the WSP45G grade for consistent edge life and secure chip control; the insert's F55 chipbreaker and 15° clearance support productive milling of steels, stainless steel and high-temperature alloys. Order genuine Walter Tools inserts via Metav Werkzeuge or consult our technical team for application-specific recommendations. XDMT16T3100R-F55 WSP45G Fräswendeschneidplatte by Walter Tools — Tiger·tec Gold, versatile for steels and superalloys A XDMT16T3100R-F55 WSP45G milling indexable insert designed for medium to high-performance milling where stable cutting edges and reliable chip formation are essential Tiger·tec Gold PVD coating for long tool life WSP45G grade for versatile toughness and wear resistance 15° clearance angle for improved cutting stability 1 mm corner radius for robust edge strength Maximise productivity with a tough, coated grade The combination of the Tiger·tec Gold coating and the WSP45G grade delivers a balance of wear resistance and edge toughness that supports higher metal removal rates in interrupted and continuous milling. The PVD-based coating reduces adhesive wear and improves heat resistance, so machining cycles remain stable even under fluctuating loads. By favouring a coated carbide grade, process windows widen and tool-change frequency is reduced, which contributes directly to lower machining costs and less downtime. Secure chip control and consistent edge performance Equipped with the F55 chipbreaker and a measured 15° clearance, this insert promotes predictable chip formation across a broad range of workpiece materials. The chipbreaking geometry is tuned to avoid clogging in typical milling feeds, while the clearance angle helps maintain a steady cutting engagement. These features lead to improved surface finish and fewer secondary operations, making the insert particularly suitable for serial production where reproducibility and uptime are priorities. Geometry optimised for robustness and repeatability A 1 mm corner radius provides a robust cutting edge that resists chipping during entry and exit, extending usable life in demanding operations. The plate size of 16 mm and a T3 thickness ensure compatibility with common milling holders and secure clamping. Tolerance class M ensures repeatable positioning and consistent cutting conditions from insert to insert, supporting predictable process control and reduced setup variation in production environments. Broad material scope for versatile shop use The insert is formulated for machining unalloyed and alloyed steel, stainless steel and demanding heat-resistant superalloys and titanium. The WSP45G grade is optimised to handle the thermal and mechanical stresses typical of these materials, maintaining stable edges where other grades might wear prematurely. This versatility reduces the need for multiple specialised grades and simplifies tooling strategies across different workpieces. Contact Metav Werkzeuge for tailored milling recommendations and secure genuine Walter Tools Tiger·tec Gold inserts; our consultants provide application advice and rapid supply from stock Technical Data SKU: XDMT16T3100R-F55-WSP45G-WALTER Description: Fräswendeschneidplatte XDMT16T3100R-F55 WSP45G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSP45G Execution: T Article code (internal): XDMT16T3100R-F55 Full designation: XDMT16T3100R-F55 WSP45G UID: XDMT16T3100R-F55-WSP45G-WALTER Facts Clearance angle: 15° Corner radius: 1 mm Plate size: 16 mm Thickness: T3 Chipbreaker: F55 Tolerance class: M Special features Coating technology: Tiger·tec Gold (PVD) Material suitability: steel, stainless steel, superalloys and titanium Sortenbeschreibung: tough, versatile PVD-coated carbide grade Typical applications: productive milling, interrupted cuts, finishing passes FAQ What materials can this insert machine effectively? The XDMT16T3100R-F55 WSP45G insert is suitable for machining steel, stainless steel and high-temperature superalloys including titanium, benefiting from the Tiger·tec Gold coating and the WSP45G grade. Which chipbreaker and geometry does the insert use? This insert features the F55 chipbreaker and a 15° clearance angle, combined with a 1 mm corner radius to support reliable chip control and edge robustness. How does the Tiger·tec Gold coating help in production? Tiger·tec Gold provides enhanced wear resistance and thermal stability, which extends tool life and maintains cutting performance across varying machining loads for the WSP45G grade. Is this insert compatible with standard milling holders? The plate size (16 mm) and T3 thickness are designed for compatibility with common milling holder systems; tolerance class M ensures consistent seating and reproducible results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XDMT2004125R-F55 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, optimised chip control and long tool life for efficient milling of steel and cast iron; order the insert directly via Metav Werkzeuge or ask our consultants for application support. XDMT2004125R-F55 WKP25S – Fräswendeschneidplatte for steel & cast iron by Walter Tools The XDMT2004125R-F55 WKP25S is a coated carbide milling insert from the Tiger·tec Silver series, designed for high-efficiency milling of steel and cast iron in industrial production. Tiger·tec Silver coated carbide grade WKP25S Optimised chip control with F55 chipbreaker 15° free cutting angle, 1.2 mm corner radius Precise M tolerance, 20 mm insert size Proven performance for continuous production The Tiger·tec Silver family combines advanced coating technology with a robust substrate to deliver consistent cutting performance across a wide range of applications. The WKP25S grade is a coated carbide formulation optimised for the thermal and mechanical demands of machining steel and cast iron, offering reliable wear resistance and stable edge life. In practice, this means fewer tool changes and a smoother production flow, with the insert supporting steady metal removal rates under typical milling conditions. Precise geometry for predictable results Accurate geometry is central to repeatable component quality. The indexable insert features a 15° free cutting angle and a 1.2 mm corner radius that together support controlled engagement and improved surface finish. The tool is manufactured to an M tolerance, ensuring consistent seating and minimal runout when mounted in compatible toolholders. Combined with the chipbreaker F55, the design promotes manageable swarf formation and reduced load peaks on the cutter, helping to maintain cycle-time stability and predictable part tolerances. Application-oriented benefits and compatibility This milling grade is tailored to ISO groups P and K, making it suitable for a broad mix of unalloyed and alloyed steels as well as grey and nodular cast irons. As an indexable milling insert, it provides the economic advantages of replaceable cutting edges—fast index changes, lower inventory costs and the chance to choose optimal geometries for specific jobs. For job shops and production lines that demand a balance between productivity and finish quality, the insert offers an effective compromise between aggressive material removal and surface integrity. Discuss machining requirements with Metav Werkzeuge—our specialists will advise on using the Walter Tools XDMT2004125R-F55 WKP25S for optimal productivity and tool life, email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: XDMT2004125R-F55-WKP25S-WALTER Name: Fräswendeschneidplatte XDMT2004125R-F55 WKP25S Brand: Walter Tools Series: Tiger·tec Silver Grade: WKP25S Core measurements Free cutting angle: 15° Corner radius: 1.2 mm Insert size: 20 mm Thickness: 04 Tolerance class: M Materials & features Coating: coated carbide (Tiger·tec Silver) Chipbreaker: F55 Suitable for: steel (P), cast iron (K) Execution: T Series designation: Tiger-tec Silver FAQ Which workpiece materials are suitable for this insert? The XDMT2004125R-F55 WKP25S insert is optimised for steel (ISO P) and cast iron (ISO K), matching the thermal and abrasive demands of these groups. What does the F55 chipbreaker deliver in practice? The chipbreaker F55 promotes consistent swarf control and short, manageable chips, reducing tool load peaks and improving process stability when milling tougher materials. What are the key dimensions to check for tool mounting? Check the 20 mm insert size, 1.2 mm corner radius and the M tolerance class to ensure correct fit and repeatable positioning in the chosen toolholder. How does the Tiger·tec Silver technology extend tool life? Tiger·tec Silver combines an engineered coating with a resilient substrate to resist abrasive wear and thermal degradation, which supports longer edge life and fewer index changes during production. Is this insert suitable for precision finishing as well as roughing? With its geometry and 1.2 mm corner radius, the insert balances material removal with surface quality; it is appropriate for semi-finish and many finishing passes depending on process parameters. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XDMT2004125R-F55 WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKP35S carbide grade for consistent productivity and long tool life; the combination of the F55 chipbreaker and a 15° relief ensures reliable chip control and surface integrity. Order the insert directly via Metav Werkzeuge or contact our consultants for application‑specific advice. XDMT2004125R-F55 WKP35S milling insert — Tiger·tec Silver grade for Stahl and cast iron, Walter Tools The XDMT2004125R-F55 WKP35S is a coated carbide milling insert engineered for productive face and shoulder milling of Stahl and cast iron, delivering stable wear behaviour in medium to heavy-duty operations. Tiger·tec Silver coating technology WKP35S coated carbide grade F55 chipbreaker for predictable chips 15° relief angle for versatile engagement High‑performance grade for productive machining The combination of Tiger·tec Silver surface technology and the WKP35S coated carbide grade provides a balance of hardness and toughness that favours long tool life and consistent cutting forces. This makes the insert especially suitable where process stability and cycle time reduction are priorities. The coating reduces adhesive and abrasive wear, which contributes to fewer tool changes and higher machine availability. For shops seeking repeatable results, the insert’s construction supports reliable dimensional control and lowers the frequency of rework. Controlled chip formation and consistent surface finish Built around the F55 chipbreaker and a 1.2 mm corner radius, the geometry produces short, controllable chips that evacuate readily from the cut, reducing the risk of surface damage and tool clogging. The 15° relief ensures a stable cutting engagement across a variety of radial depths, enabling predictable surface quality even under variable feed conditions. Together these features lower the likelihood of unexpected interruptions and simplify process setup for operators and engineers alike. Wide material coverage with clear application focus Specified for working Stahl and cast iron according to the grade characteristics, the insert is optimised for the thermal and abrasive patterns typical of these materials. The coated carbide substrate adapts to the common heat generation in machining Stahl, while the chip control strategy addresses the brittle, breaking chips of cast iron. With a standard tolerance class M and the compact plate dimensions, the insert integrates smoothly into established tool holders and milling systems used in series production. Practical integration and shopfloor benefits The insert’s standard designation and SKU simplify procurement and traceability in production environments; the robust grade supports longer intervals between indexings and fewer stock-keeping variants. Compatibility with common cutter bodies allows straightforward replacement without additional machine adjustments. For workshops aiming to raise throughput while maintaining surface quality, this solution reduces downtime, supports predictable tool consumption and helps maintain process throughput across shifts. Contact Metav Werkzeuge to discuss the application suitability of the Tiger·tec Silver WKP35S insert and to arrange supply or technical advice tailored to specific machining tasks Technical data Article number / SKU: XDMT2004125R-F55-WKP35S-WALTER Product designation: XDMT2004125R-F55 WKP35S Product type: Milling insert Brand: Walter Tools Data Corner radius: 1.2 mm Relief angle: 15° Plate size: 20 Plate thickness: 04 Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKP35S (coated carbide) Chipbreaker: F55 Applicable materials: Stahl, cast iron Execution: T Series: Tiger‑tec Silver FAQ What materials is this insert suited for? The XDMT2004125R-F55 WKP35S insert from Walter Tools is formulated for machining Stahl and cast iron, with the WKP35S grade optimised for the typical wear modes of these groups. How does the F55 chipbreaker improve machining? The F55 chipbreaker on the insert promotes short, predictable chips and stable evacuation, which assists in maintaining surface finish and reduces the risk of re-cutting chips during milling operations. What is the benefit of the Tiger·tec Silver coating? The Tiger·tec Silver coating increases resistance to adhesive and abrasive wear, resulting in longer tool life and more consistent cutting behaviour for the WKP35S grade in demanding applications. Can this insert be used in existing cutter bodies? Yes, the insert’s standard designation and dimensional data allow integration into compatible cutter systems; check the cutter manufacturer’s compatibility list for the correct seat and clamping details. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand appearance: Walter Tools) is part of the group of manufacturers of precision tools. Protected trademarks and product names remain the property of their respective owners. Brand names and registered trademarks are used solely for explanation. There is no connection between our company and the named brands. The offered item is an original, brand‑new product from the manufacturer.
XDMT2004125R-F55 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSM35G grade for stable cutting in demanding materials; the optimised F55 chipformer and a 15° free angle ensure secure chip control and prolonged edge life. Order the insert directly via Metav Werkzeuge or request advice from our consultants. XDMT2004125R-F55 WSM35G Fräswendeschneidplatte – Walter Tools (for rostfreie Stähle and heat-resistant alloys) A robust coated carbide milling insert designed for secure chip formation and high process reliability in rostfreie Stähle and demanding superalloys. Tiger·tec Gold coating for heat resistance Optimised F55 chipbreaker for secure chips 15° free angle and 1.2 mm corner radius Greater process reliability through advanced coating technology The combination of the Tiger·tec Gold coating and the WSM35G carbide class delivers reliable performance when machining tough materials. The advanced coating improves heat resistance and reduces adhesion on the cutting edge, which is particularly beneficial for rostfreier Stahl that tends to work-harden and generate high cutting temperatures. By choosing a grade engineered for thermal stability, the insert supports longer tool life and fewer interruptions, translating into improved production uptime and predictable cycle times. Predictable chip control and consistent surface results Built with an F55 chipbreaker and a precise corner geometry, this insert gives stable chip formation and helps avoid built-up edge. The 1.2 mm corner radius balances edge robustness with the ability to achieve a clean surface finish; the 15° free angle reduces contact with the workpiece where friction would otherwise increase heat generation. These attributes make the insert suitable for finishing and medium-depth roughing passes where consistent surface quality and repeatable dimensional results are required. Application guidance for rostfreie Stähle and superalloys Designed for processing rostfreie Stähle and heat-resistant alloys, the insert is well suited to parts that demand stable cutting edges under thermal stress. The WSM35G grade is a coated carbide designed for these materials and, depending on the chosen cutting data and machine rigidity, supports a productive machining strategy. For operations involving titanium or nickel-base alloys, adopting conservative feeds with adequate coolant and stable clamping will harness the insert’s strengths and protect the cutting edge against thermal overload. For high-process reliability with Walter Tools’ Tiger·tec Gold grade, contact Metav Werkzeuge for tailored recommendations and to place an order; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: XDMT2004125R-F55-WSM35G-WALTER Label: Fräswendeschneidplatte XDMT2004125R-F55 WSM35G Walter Tools Manufacturer: Walter Tools Key specifications Free angle: 15° Corner radius: 1.2 Plate size: 20 Plate thickness: 04 Chipbreaker: F55 Materials & features Coating / series: Tiger·tec Gold Grade: WSM35G (coated carbide) Suitable for: rostfreier Stahl; superalloys and titanium Tolerance class: M FAQ What materials is the XDMT2004125R-F55 WSM35G suited for? The XDMT2004125R-F55 WSM35G insert is specified for rostfreie Stähle and heat-resistant superalloys; the WSM35G grade supports stable cutting in these challenging materials. How does the Tiger·tec Gold coating benefit machining? Tiger·tec Gold coating on the Walter Tools insert increases thermal resistance and reduces adhesion, which improves edge life and process stability when machining demanding alloys. Which chipbreaker should be selected for secure chip formation? The F55 chipbreaker integrated into this insert is optimised for reliable chip control in rostfreie Stähle and similar materials, promoting consistent cutting and reduced re-cutting of chips. What cutting geometry features help achieve good surface finish? The insert’s 15° free angle and 1.2 mm corner radius combine edge strength with reduced friction, enabling improved surface quality during finishing and medium-depth passes. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Brand names and trademarks are the property of their respective owners. Trademarks and protected product names are mentioned for explanation only; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
XDMT2004125R-F55 WSP45G Wendeplatten - Walter Tools
Take advantage of the robust Tiger·tec Gold technology and the versatile WSP45G grade together with a 15° relief angle and 1.2 mm corner radius to secure stable chip formation and longer tool life in mixed-material milling. Order authentic Walter Tools inserts via Metav Werkzeuge or request cutting data from the sales team for process matching. XDMT2004125R-F55 WSP45G milling insert (Tiger·tec Gold) – Walter Tools, 15° relief XDMT2004125R-F55 WSP45G is a coated carbide milling insert intended for versatile milling of Stahl, rostfreier Stahl and high-temperature alloys Tiger·tec Gold coating, WSP45G grade 15° relief angle for secure cutting 1.2 mm corner radius for edge stability Chipbreaker F55 for controlled chip formation Broad material coverage for fewer tool changes and reliable results The WSP45G grade, delivered within the Tiger·tec Gold family, is engineered as a tough, PVD-coated carbide for demanding milling tasks. Its chemistry and coating combination provide consistent cutting behaviour when machining different groups such as Stahl, rostfreier Stahl and heat-resistant superalloys or titanium. This material breadth reduces the need to swap inserts between operations, supporting uninterrupted production and predictable cycle times. The specification P / M / S indicates suitability across common steel grades, stainless alloys and high-temperature materials, ensuring the cutting edge copes with typical thermal loads and varied chip formation. Stable edge geometry that improves part finish and tool life A 15° relief angle paired with a 1.2 mm corner radius delivers a balance between edge strength and cutting engagement. The moderate clearance limits rubbing while the larger corner radius increases resistance to chipping under interrupted cuts, so surface quality remains consistent during longer tool runs. The integrated F55 chipbreaker promotes short, controllable chips that evacuate reliably from the cut, reducing recutting and heat concentration at the edge. For workshop planners this translates into fewer scrap parts, extended insert life and a measurable drop in off-quality incidents. Coating and chip control tuned for productivity and process security The Tiger·tec Gold surface treatment provides a wear-resistant PVD layer that supports higher cutting feed rates and steady performance across pass variations. Combined with the insert’s geometry, the result is improved process security — shorter set-up optimisation, less frequent insert replacement and repeatable surface finishes. As a Walter Tools product, the insert benefits from the manufacturer's focus on stable cutting edges and high productivity, making it suitable for both high-volume milling and critical single-part machining where reproducibility matters. Contact Metav Werkzeuge for specific cutting parameters and to secure original Walter Tools Tiger·tec Gold inserts for optimised milling performance Technical Data Article number: XDMT2004125R-F55-WSP45G-WALTER Designation: XDMT2004125R-F55 WSP45G Type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Gold Core data Free angle: 15° Corner radius: 1.2 mm Insert size: 20 Thickness: 04 Tolerance class: M Features & applications Grade: WSP45G Chipbreaker: F55 Material suitability: P / M / S (Stahl, rostfreier Stahl, superalloys/Titanium) Execution: T FAQ What materials is this insert suitable for? The XDMT2004125R-F55 WSP45G insert is suitable for machining Stahl, rostfreier Stahl and heat-resistant alloys (P / M / S), offering versatility across common milling applications. How does the Tiger·tec Gold coating help in production? The Tiger·tec Gold coating on the insert enhances wear resistance and supports stable cutting, enabling higher productivity and more consistent surface quality over repeated cycles. What benefit does the 1.2 mm corner radius provide? A 1.2 mm corner radius increases edge strength and reduces the risk of chipping during interrupted cuts, improving tool life and part finish. Is the chipbreaker F55 suitable for heavy milling? The F55 chipbreaker promotes controlled chip formation and evacuation; combined with the grade and geometry it supports reliable chip control in many milling operations. Can this insert be used for finishing and roughing operations? Yes, the combination of the WSP45G grade, Tiger·tec Gold coating and the insert geometry allows the insert to perform across a range of cutting conditions, making it appropriate for both finishing and more aggressive passes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for identification and comparison only; there is no affiliation implied between our company and the named manufacturers. The offered item is an original, factory-new part.
XDMT2004127R-F55 WSP45G WSP45G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold coating and the F55 chipbreaker delivers durable cutting performance and consistent surface quality; the 15° free angle with a 1.2 mm corner radius ensures stable edge strength and predictable wear. Order the XDMT2004127R-F55 WSP45G via Metav Werkzeuge or contact the consultants for detailed application support. XDMT2004127R-F55 WSP45G milling indexable insert (Tiger‑tec Gold, 1.2 mm r, 15°) by Walter Tools The XDMT2004127R-F55 WSP45G is a PVD‑coated carbide milling insert optimised for versatile machining of Stahl, rostfreier Stahl and high‑temperature alloys such as Titan. Tiger‑tec Gold PVD coating for extended tool life Multi‑material capability: Stahl and rostfreier Stahl Stable chip control with F55 chipbreaker High‑performance coating for longer productive runs The Tiger‑tec Gold PVD system and the WSP45G grade combine to provide enhanced wear resistance and adhesion strength, which translates into longer productive tool life and fewer insert changes. The coating technology reduces flank and crater wear under the thermal loads typical of milling operations, enabling more consistent batch quality. This performance is particularly relevant in high‑mix production where predictable tool behaviour reduces downtime and stabilises throughput. Precise chip control and surface finish Engineered chip geometry with the F55 chipbreaker promotes efficient evacuation and reduces re‑cutting of chips, supporting improved surface quality and dimensional stability. The 15° free angle and 1.2 mm corner radius provide a balance between edge robustness and cutting aggressiveness, making the insert suitable for shoulder milling and semi‑finishing passes. Clear chip formation reduces thermal peaks at the cutting edge, which helps maintain tolerances and part integrity. Predictable tool life and repeatable results With a tolerance class of M and the coated carbide construction, this insert offers repeatable edge behaviour across batches, supporting consistent cycle times and predictable maintenance intervals. The moderate corner radius and the coating synergy reduce the risk of premature edge chipping when machining tougher materials, delivering a reliable return on machining time and improving process stability in mixed‑material production environments. Practical integration into existing milling toolchains The insert’s designation aligns with common ISO indexable systems, easing inventory management and toolholder compatibility. Its material adaptability — indicated by the P / M / S classification — allows consolidation of inventory for components made from Stahl, rostfreier Stahl and heat‑resistant alloys, simplifying tool selection and reducing set‑up complexity. Technical consultation is available for optimising cutting data and feeds to match machine rigidity and workpiece conditions. Contact Metav Werkzeuge for tailored cutting data, availability and to arrange a technical application review for Walter Tools Tiger‑tec Gold inserts Technical data SKU: XDMT2004127R-F55-WSP45G-WALTER Article designation: XDMT2004127R-F55 WSP45G Product type: milling indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Free angle: 15° Corner radius: 1.2 mm Plate size: 20 Thickness code: 04 Tolerance class: M Special features Grade: WSP45G Chipbreaker: F55 Material classification: P / M / S Construction: coated carbide (PVD) Execution: T FAQ Which materials can be machined with this insert? The XDMT2004127R-F55 WSP45G is designed for machining Stahl, rostfreier Stahl and high‑temperature alloys (P / M / S), providing reliable chip control across these groups. What is the advantage of the Tiger‑tec Gold coating? Tiger‑tec Gold on the WSP45G grade enhances wear resistance and adhesion under milling loads, helping to extend insert life and maintain consistent component quality. How does the F55 chipbreaker affect performance? The F55 chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the likelihood of recutting, especially in interrupted cuts. Is the corner radius suitable for finishing operations? With a 1.2 mm corner radius the insert offers increased edge strength suitable for semi‑finishing and robust finishing passes while supporting consistent dimensional control. What information is needed to get optimal cutting data? Provide material, machine power, clamping rigidity and toolholder type; Metav Werkzeuge can then recommend optimal speeds and feeds for the XDMT2004127R-F55 WSP45G insert. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; www.walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XDMT2405150R-F55 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP25S cutting grade for consistent chip control and extended tool life; the 15° relief and 1.5 mm corner radius ensure durable edges and reliable surface quality in mixed production. Order the insert directly via Metav Werkzeuge or ask the consultants for tailored machining parameters. XDMT2405150R-F55 WKP25S milling indexable insert for steel and cast iron by Walter Tools — Tiger‑tec Silver, 1.5 mm radius The XDMT2405150R-F55 WKP25S is a precision milling insert engineered for high‑productivity machining of steel (P) and cast iron (K), combining a robust coated‑carbide grade with geometry optimised for stable cutting. Tiger‑tec Silver coated grade WKP25S Suitable for steel and cast iron machining 15° clearance angle for stable cutting 1.5 mm corner radius for durable edges Engineered for predictable productivity and longer tool life The coated carbide WKP25S grade, integrated in the Tiger‑tec Silver family, is formulated to balance wear resistance with toughness for industrial milling tasks. This results in predictable tool life and consistent chip formation, which supports higher uptime and fewer unplanned tool changes. The coated microstructure reduces abrasive wear on the cutting edge, so machining cycles remain stable across batches; this is particularly advantageous where process repeatability and throughput are critical. Technical teams will appreciate the reliable performance when optimising feed and speed for mixed steel work. Geometry that improves edge strength and surface finish A 15° relief angle and a 1.5 mm corner radius translate into tangible machining benefits: the clearance angle reduces rubbing and heat buildup behind the cutting edge, while the larger corner radius increases edge strength and resistance to chipping. In practical terms, this geometry helps to maintain surface quality during both light finishing passes and more aggressive down‑milling operations. For planners unfamiliar with the terms, the relief angle is the clearance behind the blade that prevents interference, and the corner radius is the rounded edge that distributes cutting forces to avoid premature failure. Broad material coverage with ISO‑conformant application Designed for ISO groups P (steel) and K (cast iron), the grade provides a dependable solution across a wide range of steels and grey or nodular cast irons. The insert’s chipbreaker F55 supports controlled, short chips for abrasive or brittle materials, reducing the risk of entanglement and improving surface integrity. Where a workshop processes serial batches of different steels and cast‑iron components, this versatility reduces tool inventory and simplifies grade selection without compromising on process security. Ready for industrial integration and process support The insert’s designation and tolerance class M facilitate consistent seating and repeatable positional accuracy in indexable toolholders, aiding quick indexation during production. Walter Tools’ series alignment with the Tiger‑tec Silver platform supports established tool‑set strategies and makes comparisons against alternative grades straightforward during process optimisation. For additional machining data, application tables or cutting parameter recommendations, Metav Werkzeuge offers direct technical assistance by email or phone; this support complements the factual performance data to help integrate the insert smoothly into existing workflows. Contact Metav Werkzeuge for expert advice on integrating Walter Tools Tiger‑tec Silver inserts into production and to obtain cutting parameters tailored to specific steel or cast iron applications. Technical Data SKU: XDMT2405150R-F55-WKP25S-WALTER Designation: XDMT2405150R-F55 WKP25S Product type: Fräswendeschneidplatte (milling indexable insert) Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Relief angle: 15° Corner radius: 1.5 mm Insert size: 24 Plate thickness: 05 Tolerance class: M Chipbreaker: F55 Special features Coating/technology: Tiger‑tec Silver Grade: WKP25S (coated carbide) Suitable for: steel (P), cast iron (K) Material code: P / K Execution: T Series description: balanced wear resistance and chip control FAQ Which materials are best machined with this insert? The insert is optimised for steel and cast iron applications; the WKP25S grade within the Tiger‑tec Silver series is tailored to handle the typical heat and chip behaviour of these material groups. How does the 1.5 mm corner radius affect machining results? A 1.5 mm corner radius increases edge strength and reduces the risk of chipping under variable loads; this contributes to improved surface finish and longer usable life for the insert. Is the insert suitable for roughing and finishing operations? Yes, the combination of WKP25S grade and the F55 chipbreaker supports both robust roughing and controlled finishing passes when cutting parameters are selected accordingly. What tolerance and designation information is relevant for tool setup? The insert is supplied in tolerance class M with the designation XDMT2405150R-F55 WKP25S, which ensures consistent seating and repeatable indexing in compatible toolholders. Manufacturer: Walter Tools; Walter AG, Tübingen, Germany. Protected trademarks and trade names remain the property of their respective owners. Brand names are used for explanatory purposes only and do not imply any affiliation between Metav Werkzeuge and the named manufacturers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com