WOMX080408-D57 WKP25S WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of high process stability, reliable chip control and broad material suitability for consistent series production. Order directly via Metav Werkzeuge or contact our technical advisers for tailored application support. WOMX080408-D57 WKP25S Trigon 80° indexable insert for steel and cast iron machining — Walter Tools A precision Trigon 80° indexable insert in WKP25S grade, designed for boring and counterboring operations in steel and cast iron with Tiger‑tec Silver coating. Tiger‑tec Silver coating for long tool life Designed for steel and cast iron machining Trigon 80° form, 0.8 mm corner radius D57 chipbreaker for consistent chip control High stability and predictable tool life for machining lines The WKP25S grade, integrated into the Tiger‑tec Silver series, offers a balance of wear resistance and toughness that delivers predictable tool life in production environments. The coated carbide composition is optimised to withstand the thermal loads typical of machining steel and cast iron, which reduces unplanned tool changes and keeps cycle times steady. The trigon geometry provides a robust cutting edge while the 0.8 mm corner radius increases edge strength; together these characteristics translate into fewer interruptions and a smoother production flow. Controlled chip formation improves process reliability Equipped with the D57 chipbreaker, this insert focuses on consistent chip control, a key factor for automated or semi-automated boring operations. Stable chip breaking reduces the risk of workpiece damage and minimises interaction with downstream handling systems, which supports higher process security and easier machine integration. For operators less familiar with insert geometry: a chipbreaker channels and breaks chips into manageable lengths, preventing tangling and improving surface finish while lowering the likelihood of tool wear caused by poor chip evacuation. Geometry and tolerance for repeatable precision The Trigon 80° plate form combined with tolerance class M and the specified plate thickness ensures secure clamping and repeatable positioning in standard toolholders. These mechanical characteristics contribute to consistent dimensional results across batches, which is particularly valuable when turning or boring parts to tight tolerances. The insert’s designation and size coding make replacement and inventory management straightforward, reducing setup time and simplifying tool procurement for production planners. For application-specific recommendations on using the WOMX080408-D57 WKP25S insert from Walter Tools, contact Metav Werkzeuge’s technical consultants at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for tailored advice and application data Technical data Article number: WOMX080408-D57-WKP25S-WALTER Article name: Bohr-/Aufbohrwendeschneidplatte WOMX080408-D57 WKP25S Walter Tools Series: Tiger‑tec Silver Facts Plate form: Trigon 80° Corner radius: 0.8 mm Plate size: 08 Thickness code: 04 Tolerance class: M Design / Special features Grade: WKP25S, coated carbide Chipbreaker: D57 Suitable for: steel (P) and cast iron (K) Execution: X ISO designation: WOMX080408-D57 WKP25S FAQ What materials is this insert suitable for? The insert is specified for machining steel (P) and cast iron (K); Walter Tools’ WKP25S grade is formulated to handle the heat and chip formation typical of these groups. How does the D57 chipbreaker affect production? The D57 chipbreaker promotes consistent chip formation and evacuation, improving surface finish and reducing the risk of chip-related interruptions during boring and counterboring operations. What benefit does the Trigon 80° form provide? The Trigon 80° geometry delivers a stable cutting edge and secure seating in indexable toolholders, supporting repeatable dimensions and robust performance in interrupted cuts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are cited solely for explanation. There is no affiliation between our company and the manufacturers mentioned. The offered item is original, brand‑new production by the manufacturer Walter Tools.
WOMX080408-D57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, precise Trigon 80° geometry and controlled chip formation for reliable drilling and reaming of steel and cast iron; order directly via Metav Werkzeuge or consult our team for application advice. WOMX080408-D57 WKP35S Drilling/Reaming Indexable Insert by Walter Tools — Tiger·tec Silver, for steel & cast iron The WOMX080408-D57 WKP35S is a trigon 80° indexable insert designed for drilling and reaming operations in steel and cast iron, offering stable cutting behaviour and extended tool life. Tiger·tec Silver coating for extended tool life Trigon 80° geometry for stable cutting Chipbreaker D57 for controlled chip formation Suitable for steel and cast iron machining Consistent productivity through advanced coating and material pairing The combination of a Tiger·tec Silver surface treatment and the WKP35S grade delivers a balance of wear resistance and edge stability that is optimised for continuous production. The coated carbide formulation is tuned to the thermal and mechanical loads encountered when machining steel and cast iron, which reduces flank wear and extends effective tool life. This leads to fewer insert changes, predictable tool cycles and improved process economy for repetitive drilling or reaming tasks. Stable cutting geometry for repeatable hole quality The Trigon 80° geometry with a 0.8 mm corner radius provides mechanical rigidity and improved centre guidance during entry, which helps to maintain concentricity and hole tolerance. The chipbreaker D57 supports controlled chip formation, reducing the risk of clogging in internal coolant passages and promoting a consistent surface finish. For manufacturing environments that prioritise reproducible results, this geometry reduces vibration and contributes to lower scrap rates and higher first-pass yield. Process reliability and shop-floor integration Specified to tolerance class M, this insert supports consistent fitment and predictable replacement intervals in compatible toolholders. The insert’s execution and chip control characteristics suit high-volume applications where cycle time and stability matter; the combination of grade, chipbreaker and form offers practical advantages for both manual setups and automated drilling heads. For application-specific parameter settings and holder compatibility, Metav Werkzeuge can provide tailored recommendations and stocking information. Contact Metav Werkzeuge for application-specific advice, availability and integration support for Walter Tools WOMX080408-D57 WKP35S — eMail: info@metav-werkzeuge.com • Phone: +49 2822 7131930 Technical Data Article number: WOMX080408-D57-WKP35S-WALTER Product designation: WOMX080408-D57 WKP35S Manufacturer: Walter Tools Facts Form: Trigon 80° Corner radius: 0.8 mm Size: 08 Thickness: 04 Chipbreaker: D57 Tolerance class: M Special features Grade: WKP35S (coated carbide) Coating technology: Tiger·tec Silver Application groups: P (steel) and K (cast iron) Execution: X Geometry: Trigon 80°; robust cutting edge for drilling/reaming FAQ What materials is this insert suitable for? The WOMX080408-D57 WKP35S insert is specified for steel (ISO group P) and cast iron (ISO group K), reflecting the grade and coating combination. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the WOMX080408-D57 WKP35S improves wear resistance and thermal stability, which extends tool life and enhances process reliability during drilling and reaming. What role does the chipbreaker D57 play? Chipbreaker D57 supports predictable chip formation and evacuation, reducing the likelihood of clogging and aiding consistent surface finish when using the insert in compatible toolholders. Is the Trigon 80° form suitable for entry stability? Yes — the Trigon 80° geometry combined with a 0.8 mm corner radius improves entry guidance and mechanical stability, which helps maintain hole accuracy and repeatability. How is tolerance class M relevant for workshop use? Tolerance class M indicates a standardised dimensional accuracy that ensures consistent fitment in holders and repeatable mounting, facilitating predictable replacement and process control. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original factory-new goods of the manufacturer.
WOMX080408-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of proven edge stability and broad material capability to increase process reliability and reduce rework; order the inserts directly via Metav Werkzeuge or request specialist advice from their consultants. WOMX080408-D57 WSP45G — Trigon 80° drilling/boring insert, Tiger·tec Gold, Walter Tools The WOMX080408-D57 WSP45G is a Trigon 80° indexable insert for drilling and boring operations, designed to deliver consistent cutting performance in production and workshop environments. Tiger·tec Gold coating for high edge stability Trigon 80° insert geometry for robust cutting Versatile for Stahl, rostfreier Stahl and superalloys 0.8 mm corner radius for dependable strength Optimised cutting performance for repeatable results The Tiger·tec Gold coating combined with the WSP45G grade provides a coated carbide (PVD) surface that improves edge stability and wear resistance under cyclic loads. This arrangement reduces flank wear and supports stable tool life, resulting in fewer interruptions and more predictable batch output. The specification is tailored for drilling and boring inserts, where consistent chip formation and edge integrity directly affect hole quality and downstream processing. Broad material range reduces tooling variants Designed for the ISO groups P / M / S, the insert copes with a wide spectrum of workpiece materials: Stahl (P) for general steels, rostfreier Stahl (M) for stainless and difficult-to-machine alloys, and heat-resistant superalloys and titanium (S). The Trigon 80° geometry promotes robust engagement and improves resistance to shock loads, while the 0.8 mm corner radius balances edge strength with achievable surface finish. This versatility minimises the number of different grades and geometries required on the shelf, simplifying tool management. Process security and economical machining Tolerance class M and the D57 chipbreaker are matched to the insert form to aid chip control and maintain cutting forces within stable limits during drilling and boring cycles. The sturdy Trigon form and measured plate thickness ensure reliable clamping and repeatability in multi-pass operations. The result is higher first-pass yield and reduced downtime, which translates into measurable cost-efficiency on the shop floor and a better return on tooling investment. Contact Metav Werkzeuge for application guidance on Walter Tools Tiger·tec Gold inserts and to procure WOMX080408-D57 WSP45G directly; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: WOMX080408-D57-WSP45G-WALTER Label: Bohr-/Aufbohrwendeschneidplatte WOMX080408-D57 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte Facts Insert form: Trigon 80° Corner radius: 0.8 mm Size code: 08 Thickness code: 04 Chipbreaker: D57 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WSP45G Material application: P / M / S Execution: X Designation without grade: WOMX080408-D57 Coated carbide (PVD), versatile for milling and drilling-related tasks FAQ What materials can this insert machine reliably? The WOMX080408-D57 WSP45G is specified for the ISO groups P, M and S, meaning it is suitable for Stahl, rostfreier Stahl and heat-resistant superalloys including titanium. What benefit does the Tiger·tec Gold series provide? Tiger·tec Gold offers a PVD coating technology that improves edge stability and wear resistance; on the WOMX080408-D57 WSP45G this enhances tool life and machining consistency. How does the Trigon 80° geometry affect drilling and boring? The 80° Trigon form delivers robust cutting edges and shock resistance, which helps when machining interrupted cuts or when higher radial forces occur during boring operations. Is the 0.8 mm corner radius a compromise between strength and finish? Yes; the 0.8 mm corner radius on this insert offers increased edge strength while still allowing a controlled surface finish appropriate for many production requirements. Which chipbreaker is used and why does it matter? This insert uses the D57 chipbreaker, designed to promote consistent chip formation and evacuation during drilling and boring cycles, supporting process security. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is original factory-new goods of the manufacturer.
WOMX100508-B57 WKP35S WKP35S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, the WKP35S cutting grade and trigon 80° geometry for consistently productive drilling and boring in steel and cast iron; order directly via Metav Werkzeuge or ask our consultants for application advice. WOMX100508-B57 WKP35S Drill/Boring Indexable Insert — Trigon 80°, Tiger·tec Silver (Walter Tools) The WOMX100508-B57 WKP35S is a trigon 80° indexable insert engineered for drilling and boring operations, optimised for machining steel (P) and cast iron (K) under demanding production conditions. Tiger·tec Silver coating for robust wear resistance WKP35S grade optimised for steel and cast iron Trigon 80° form for secure cutting geometry Corner radius 0.8 mm for reliable chip control Reliable productivity through engineered coating and grade The combination of the Tiger·tec Silver coating and the WKP35S cutting grade offers measurable improvements in tool life and process stability when machining steels and cast irons. The coating reduces abrasive wear and heat impact at the cutting edge, which translates into fewer tool changes and longer uninterrupted cycles. For operations where cycle time and repeatability matter, this insert supports a higher level of production consistency and reduces downtime associated with edge failure. Geometry that enhances cutting performance and chip control The trigon 80° shape and the corner radius 0.8 mm provide a balanced cutting geometry that is particularly effective for drilling and boring tasks. The acute trigon form secures a stable cutting engagement and better entry behaviour, while the defined corner radius supports controlled chip formation. Reduced chip breakage and improved evacuations lead to more predictable surface finishes and reduced rework in subsequent processes, offering a clear operational benefit for workshop and production environments. Application suitability and practical advantages Designed for the ISO groups P (steel) and K (cast iron), this coated carbide insert is intended for a wide range of ferrous materials encountered in general machining and production turning centres. The indexable insert format simplifies tool management and allows quick indexing or replacement without regrinding, improving shop-floor efficiency. In addition, the B57 chipbreaker geometry aids in producing short, consistent chips that are easier to clear from the cutting zone, decreasing the risk of surface damage and tool interference. Contact Metav Werkzeuge for tailored application recommendations on Walter Tools Tiger·tec Silver inserts or request precise cutting data by e‑mail or phone: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: WOMX100508-B57-WKP35S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte WOMX100508-B57 WKP35S Walter Tools Series: Tiger-tec Silver Grade: WKP35S Form: Trigon 80° Chipbreaker: B57 Corner radius: 0.8 Size: 10 Thickness: 05 Tolerance class: M Material designation: P / K Product type: Bohr-/Aufbohrwendeschneidplatte Manufacturer: Walter Tools Facts Size value: 10 Corner radius: 0.8 mm Thickness code: 05 Tolerance class: M Special features Coating: Tiger·tec Silver Cutting material: WKP35S (coated carbide) Geometry: Trigon 80° Chip control: B57 chipbreaker Material applications: steel (P), cast iron (K) Execution: X FAQ What materials is this insert suitable for? The WOMX100508-B57 WKP35S insert is suitable for ISO group P (steel) and K (cast iron), reflecting the WKP35S grade and Tiger·tec Silver coating designed for these material classes. How does the Tiger·tec Silver coating improve performance? Tiger·tec Silver reduces abrasive wear and thermal load on the cutting edge; with the WKP35S grade this results in longer tool life and improved process stability during drilling and boring. What is the advantage of the trigon 80° form? The trigon 80° geometry provides secure cutting engagement and stable entry behaviour for drilling and boring operations, promoting consistent surface quality and reduced tool vibration. Which feature helps with chip formation and evacuation? The B57 chipbreaker combined with the corner radius 0.8 mm supports short, well-controlled chips and efficient evacuation from the cutting zone, lowering the risk of surface damage. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is an original, brand-new product from the manufacturer. The Walter Tools brand is included where applicable.
WOMX100508-B57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold performance and the secure seating of the Trigon 80° form to improve process reliability and tool life in demanding machining of steel and stainless steel; order directly via Metav Werkzeuge or consult our specialists for process adaptation. WOMX100508-B57 WSP45G drill/boring indexable insert — Trigon 80°, Tiger‑tec Gold (Walter Tools) A WOMX100508-B57 WSP45G drill/boring indexable insert engineered for robust cutting in milling and drilling applications across steel, stainless steel and heat‑resistant alloys Tiger‑tec Gold PVD coating For steel, stainless steel and superalloys Trigon 80° geometry for reliable clamping 0.8 mm corner radius for cutting edge stability Durable coating for longer cutting cycles and predictable tool life The combination of the Tiger‑tec Gold coating and the WSP45G grade delivers a PVD‑based, coated carbide solution that emphasises wear resistance and thermal stability. This composition supports extended cutting times and reduces unexpected tool changes, which directly contributes to higher machine uptime. In practice, the coated surface improves resistance to built‑up edge and abrasion during continuous operations, enabling a more consistent surface finish and repeatable performance even under variable cutting conditions. Geometry and chip control that stabilise the machining process The Trigon 80° plate form, paired with the chipbreaker B57 and a 0.8 mm corner radius, provides a balance between edge strength and chip control for interrupted and continuous cuts. The trigon shape gives secure seat engagement and helps distribute cutting forces, while the chipbreaker guides swarf formation to avoid entanglement and reduce rework. Together these features enhance cutting edge stability, lowering the risk of chipping and supporting reliable tool indexation during medium to heavy depths of cut. Broad material applicability and process security across ISO groups Designed for the ISO material groups P / M / S, this insert covers machining of steel, stainless steel and superalloys, making it suitable for diverse production environments. The designation reflects adaptation to the typical heat generation and chip behaviour of each group: group P for general steel, group M for tough, work‑hardening stainless steel and group S for heat‑resistant superalloys and titanium‑based materials. The result is improved process security and consistent component quality, particularly where repeatability and long tool life are required. As an indexable insert from Walter Tools, it supports straightforward replacement and predictable performance in tool‑changing cycles. Discuss specific application requirements with Metav Werkzeuge’s specialists — Metav Werkzeuge offers tailored advice and supply for the WOMX100508-B57 WSP45G insert; eMail info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a process consultation Technical data SKU: WOMX100508-B57-WSP45G-WALTER Article designation: WOMX100508-B57 Full designation: WOMX100508-B57 WSP45G Series: Tiger‑tec Gold Grade: WSP45G Product type: drill/boring indexable insert Manufacturer: Walter Tools Numbers / Core technical data Corner radius: 0.8 mm Plate size: 10 Plate thickness: 0.5 mm Tolerance class: M Designs / Special features Trigon 80° plate form Chipbreaker B57 Coated carbide (PVD) grade Material suitability: steel, stainless steel, superalloys (ISO P/M/S) Toleranzklasse M Series Tiger‑tec Gold FAQ Which materials are suitable for this insert? The WOMX100508-B57 WSP45G is specified for machining in the ISO groups P/M/S, which covers steel, stainless steel and heat‑resistant superalloys. What coating and grade are used on the insert? The insert uses the Tiger‑tec Gold coating in the WSP45G grade, a PVD‑based coated carbide designed for improved wear resistance. How does the Trigon 80° form benefit clamping and cutting? The Trigon 80° geometry provides secure seating and even load distribution at the tool holder, supporting stable chip evacuation with the B57 chipbreaker and minimising edge breakage. What does the tolerance class M indicate? Tolerance class M denotes the manufacturing precision of the insert, ensuring consistent dimensions and interchangeability in typical industrial tool holders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, factory‑new goods of the manufacturer Walter Tools.
WOMX100508-D57 WAK15 Wendeplatten - Walter Tools
Take advantage of the combination of sharp cutting performance and controlled chip formation with the WAK15 uncoated carbide grade and the Trigon 80° geometry for efficient machining of aluminium and other non‑ferrous metals; order the insert directly via Metav Werkzeuge or consult our team for machining parameters and tool recommendations. WOMX100508-D57 WAK15 Drilling/Boring Indexable Insert (Trigon 80°, WAK15) – Walter Tools The WOMX100508-D57 WAK15 is an indexable insert designed for drilling and bore‑enlargement operations in aluminium and non‑ferrous materials, offering a balanced mix of sharp cutting edges and stable geometry Optimised for aluminium and non‑ferrous metals Trigon 80° geometry for stable cutting Uncoated carbide grade WAK15 Corner radius 0.8 mm for fine finishing Consistent performance for non‑ferrous machining The WAK15 grade is an uncoated carbide developed for high productivity in aluminium and other non‑ferrous metals. Its sharp cutting edge and low‑adhesion characteristics reduce the risk of built‑up edge, which improves surface quality and extends uninterrupted cycle times. For production environments seeking repeatable hole quality, this insert gives a reliable compromise between edge life and cutting aggressiveness. The grade’s behaviour is especially beneficial where a clean, burr‑free bore is required and where coolant strategies or low cutting forces are essential. Geometry and chip control that stabilise cutting The Trigon 80° shape combined with chipbreaker D57 supports predictable chip formation and evacuation during drilling and boring. The corner radius 0.8 mm provides a balance between cutting strength and fine surface finish; a larger radius would strengthen the edge but can increase cutting forces, while this radius maintains edge stability without sacrificing finish. The chipbreaker’s profile reduces entangling long chips common with soft metals, helping to avoid tool jams and minimising vibration — key factors for higher feed rates and reduced cycle times. Practical integration into machining systems This insert is supplied in the Walter N‑Grade System series and conforms to a tolerance class M, ensuring consistent seat fit and repeatable positioning in compatible toolholders. Plate dimensions and thickness are specified in the technical data, enabling straightforward selection for existing drilling or boring tool bodies. The combination of geometry and material suitability makes the insert a good option for manufacturers aiming to increase throughput on non‑ferrous workpieces while maintaining tight tolerances and good surface quality. For best results, pairing the insert with appropriate feeds, speeds and coolant practice will maximise productivity and tool life. For tailored machining recommendations on Walter Tools WAK15 inserts and to discuss optimal feeds, speeds and holder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: WOMX100508-D57-WAK15-WALTER Designation: WOMX100508-D57 WAK15 Product type: Drilling/boring indexable insert Manufacturer: Walter Tools Series: Walter N‑Grade System Grade: WAK15 Core data Plate size: 10 Thickness: 05 Corner radius: 0.8 mm Geometry: Trigon 80° Tolerance class: M Special features Uncoated carbide Chipbreaker D57 Material application: Aluminium and non‑ferrous metals Execution: X Material designation: N FAQ Which materials are best suited for this insert? The WOMX100508-D57 WAK15 insert is designed primarily for aluminium and other non‑ferrous metals; the WAK15 uncoated carbide grade and the insert geometry reduce material adhesion and promote clean chip formation. Is the insert coated and how does that affect use? The cutting insert is uncoated carbide (WAK15); the lack of coating keeps the cutting edge very sharp and helps avoid built‑up edge in soft, gummy materials like aluminium, which is advantageous for producing smooth bores. What role does the chipbreaker D57 play in performance? The chipbreaker D57 shapes chips to prevent long, stringy formations typical of soft metals, improving evacuation during drilling and reducing the risk of tool jamming and surface defects when using the WOMX100508-D57 WAK15 insert. Can this insert be used in standard drilling holders and what tolerance applies? The insert is made for toolholders compatible with Trigon 80° indexable inserts and is supplied to tolerance class M, ensuring consistent seating and repeatable positioning across operations. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the manufacturers named. The listed item is an original, factory‑new product from the manufacturer.
WOMX100508-D57 WKP25S WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a robust WKP25S grade and precise Trigon 80° geometry for consistent chip control and long tool life. Order the insert directly via Metav Werkzeuge or consult the team for application advice. WOMX100508-D57 WKP25S — indexable insert for drilling and boring, Tiger·tec Silver, Walter Tools The WOMX100508-D57 WKP25S is a Trigon 80° indexable insert designed for drilling and boring tasks in steel and cast iron, offering a coated-carbide grade optimised for reliable chip formation and productive machining. Tiger·tec Silver coating for durability WKP25S grade for steel and cast iron Trigon 80° geometry for stable cutting D57 chipbreaker for secure chip control Consistent performance through advanced coating and grade The insert features the Tiger·tec Silver coating combined with the WKP25S grade, a coated carbide developed to balance wear resistance and toughness. This combination reduces flank wear under typical cutting temperatures when machining unalloyed and alloyed steel as well as cast iron, resulting in a lower tool-change frequency and more predictable cycle times. The material-specific design of the grade supports stable chip formation, which translates into cleaner holes and fewer secondary operations. Geometry and chip control that support productivity The Trigon 80° form with a 0.8 mm corner radius and the D57 chipbreaker deliver mechanical strength at the cutting edge and controlled chip segmentation during interrupted cuts. The triangular shape increases the available cutting edges per insert and the modest corner radius balances edge robustness with achievable surface finish. These geometry choices improve process reliability and allow higher feeds in many drilling and boring cycles without compromising hole tolerance or surface quality. Integration into production and machining advice Designed for practical workshop and shopfloor use, the insert suits standard drilling and boring toolholders compatible with Trigon 80° inserts and is catalogue-specified for steel and cast iron applications. When integrating into a process, pairing the insert with appropriate coolant strategies and optimised cutting data ensures the best balance of tool life and cycle time. For tailored cutting parameters or to confirm fitment with existing toolholders, Metav Werkzeuge provides application guidance to adapt feeds and speeds to the required hole tolerance and material batch. Contact Metav Werkzeuge for tailored cutting-data recommendations and to arrange supply of Walter Tools inserts – email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the WOMX100508-D57 WKP25S for specific drilling and boring applications Technical data SKU: WOMX100508-D57-WKP25S-WALTER Article: Bohr-/Aufbohrwendeschneidplatte WOMX100508-D57 WKP25S Walter Tools Manufacturer: Walter Tools Facts Shape: Trigon 80° Corner radius: 0.8 mm Grade: WKP25S Chipbreaker: D57 Thickness: 05 Series: Tiger-tec Silver Tolerance class: M Geometry designation: WOMX100508-D57 Special features Coated carbide (Tiger·tec Silver) Material suitability: steel (P) and cast iron (K) Trigon 80° form for multiple cutting edges Balanced edge for chip control and surface quality Designed for drilling and boring applications FAQ What materials is this insert suitable for? The WOMX100508-D57 WKP25S insert is specified for machining steel (P) and cast iron (K), reflecting the grade design and coating choice. How does the Trigon 80° geometry benefit drilling and boring? The Trigon 80° form provides multiple cutting edges per insert and, together with the D57 chipbreaker, enhances edge strength and chip control in interrupted and continuous cuts. What does the WKP25S grade offer compared with standard grades? WKP25S, within the Tiger·tec Silver family, delivers a compromise of wear resistance and toughness to extend life in typical steel and cast iron applications while maintaining consistent chip formation. Is this insert suitable for high-feed drilling operations? The insert’s geometry and chipbreaker support increased feeds in many drilling cycles, but achievable parameters depend on machine rigidity and holder compatibility; fine-tuning is recommended. How should the corner radius influence application choice? A 0.8 mm corner radius gives a robust cutting edge that supports better tool life under load while still allowing acceptable surface finish for many hole tolerances. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany — The Walter AG (trading as Walter Tools) with headquarters in Tübingen is among the global leaders in precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. The mentioned brand is cited for explanation only and there is no affiliation with our company.
WOMX100508-D57 WKP35S WKP35S Wendeplatten - Walter Tools
Robust coated carbide geometry and a stabilised Trigon 80° seating deliver reliable chip control and long tool life for steel and cast-iron drilling operations; benefit from the WKP35S grade and Tiger·tec Silver technology for consistent productivity. Order the insert directly via Metav Werkzeuge or consult their application specialists for tailored recommendations. WOMX100508-D57 WKP35S — Bohr-/Aufbohrwendeschneidplatte, Trigon 80° for Steel & Cast iron by Walter Tools The WOMX100508-D57 WKP35S is an indexable insert designed for drilling and counterboring applications, optimised for machining steel (ISO P) and cast iron (ISO K) with a secure Trigon 80° seating. Tiger·tec Silver coating for extended tool life Trigon 80° geometry for secure seating WKP35S grade optimised for steel and cast iron 0.8 mm corner radius for robust cutting edge Consistent metalcutting results through optimised grade and coating The combination of the WKP35S grade with Tiger·tec Silver coating provides a technically balanced solution for the thermal and abrasive demands of machining steel and cast iron. Designed as a coated cemented carbide insert, the design reduces flank wear and maintains a stable cutting edge under the cyclic loads typical for drilling and reaming operations. This engineering focus supports predictable tool life and helps to reduce unplanned downtime, improving overall process efficiency in production environments. Geometry that secures the insert and improves chip control The Trigon 80° form and the chipbreaker D57 work together to provide reliable seating and controlled chip formation. The trigon geometry ensures a positive fit in the toolholder, while the D57 groove directs chips away from the cutting zone to lower the risk of jamming. The 0.8 mm corner radius reinforces the edge, giving greater resistance to edge chipping and enabling stable feeds where interrupted cuts or varying material hardness occur. Productivity gains from tooling stability and application focus By selecting a grade specifically balanced for P / K work, operators can expect improved surface finish and repeatability across batches. The insert’s properties favour steady cutting parameters, supporting higher material removal rates without sacrificing edge life. These technical benefits translate into fewer tool changes, shorter setup cycles and a lower cost-per-part when compared with unoptimised solutions — an immediate productivity advantage for demanding workshops. Practical compatibility and handling notes for reliable use The insert is supplied in the Trigon 80° format with tolerance class M and execution X, intended for standard indexable drilling bodies that accept the WOMX100508-D57 geometry. Dimensioning details and the plate size 10 and thickness 05 should be checked against the toolholder specification before assembly. Correct torque and clean seating surfaces are essential to exploit the insert’s stable cutting behaviour and to preserve the coated surface finish for extended service life. For application advice or to discuss the best Walter Tools Tiger·tec Silver insert for a specific machining task, contact Metav Werkzeuge for expert consultation and swift supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: WOMX100508-D57-WKP35S-WALTER Designation: WOMX100508-D57 WKP35S Manufacturer: Walter Tools Series: Tiger-tec Silver Core data Plate size: 10 Thickness: 05 Corner radius: 0.8 mm Geometry angle: 80° Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKP35S Applicable materials: Steel (P), Cast iron (K) Chipbreaker: D57 Shape: Trigon 80° Execution: X FAQ What materials is this insert suitable for? The WOMX100508-D57 WKP35S insert is designed for steel (ISO P) and cast iron (ISO K) applications, with the WKP35S grade specifically tuned for these material groups. How does the Tiger·tec Silver coating help in production? The Tiger·tec Silver coating on the insert reduces wear and improves thermal resistance, which extends edge life and supports consistent machining results over multiple components. What is the purpose of the D57 chipbreaker? The D57 chipbreaker controls chip shape and evacuation during drilling and counterboring, reducing the chance of chip entanglement and aiding reliable production cycles. Which geometry must the toolholder accept for correct assembly? The toolholder must accept a Trigon 80° insert with seating compatible with the WOMX100508-D57 form and the specified tolerance class M for secure clamping and accurate performance. What benefit does the 0.8 mm corner radius provide? A 0.8 mm corner radius gives a more robust cutting edge that resists chipping in interrupted cuts and improves edge stability under variable feed conditions. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Mark names and registered trademarks are used solely for explanation and identification; no affiliation or endorsement by the trademark owners is implied.
WOMX100508-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance, stable Trigon 80° geometry and precise tolerance class M for consistent drilling and boring performance; order the insert directly via Metav Werkzeuge or request application advice from our consultants. WOMX100508-D57 WSP45G — Trigon 80° indexable insert for drilling and boring, Walter Tools The WOMX100508-D57 WSP45G is an indexable insert engineered for drilling and boring operations, combining the Tiger‑tec Gold coating technology with an optimised D57 chipbreaker for dependable chip control. Tiger‑tec Gold PVD coating Trigon 80° geometry for stable cutting Suitable for steel, stainless steel and superalloys Corner radius 0.8 mm, tolerance class M High productivity through stable geometry and chip control The Trigon 80° form and the dedicated D57 chipbreaker provide consistent chip formation and evacuation during drilling and boring cycles. This geometry reduces vibration and supports a secure cutting edge, which directly improves cycle times and process stability. For automated or repetitive operations, the combination of a defined 0.8 mm corner radius and controlled chips translates into fewer interruptions for rework and a smoother production flow. The robust design makes the insert suitable for demanding interrupted cuts where chip control is critical. Versatile PVD grade for a broad range of materials The WSP45G grade, part of the Tiger‑tec Gold series, is a PVD‑coated carbide designed for demanding tasks across the ISO material groups P, M and S. This means the insert works effectively on unalloyed and alloyed steel, on stainless steel, and on heat‑resistant superalloys and titanium. The coating improves wear resistance and helps maintain a stable cutting edge when machining materials that generate heat or tend to work‑harden, reducing flank wear and extending service life under continuous use. Precision and repeatability for production environments Manufactured to tolerance class M, this insert offers consistent dimensions and fit, supporting predictable tool offsets and repeatable hole quality in serial production. The compact size 10 format and the standardised ISO designation ensure interchangeability in compatible toolholders and facilitate quick index changes. Reliable dimensional control reduces the need for frequent recalibration, making the insert a practical choice where tight tolerances and repeat runs are required. Practical application advice and process support For drilling and boring applications that involve mixed materials or intermittent drilling, the insert’s combination of grade and geometry helps maintain tool life while delivering surface quality. When optimising cutting data, consider modest feeds with stable speeds for stainless steels and higher cutting speeds with appropriate coolant strategies for steels. For tailored recommendations and cutting parameters based on specific machines or components, technical consultation is available to align tool selection with production goals and to refine process windows. Contact Metav Werkzeuge for application advice and to order the Walter Tools Tiger‑tec Gold WSP45G insert for reliable drilling and boring performance Technical Data SKU: WOMX100508-D57-WSP45G-WALTER Designation: WOMX100508-D57 WSP45G Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Insert size: 10 Thickness code: 05 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WSP45G Coating: PVD‑coated carbide Geometry: Trigon 80° Chipbreaker: D57 Execution: X Material compatibility: P / M / S (steel, stainless steel, superalloys/titanium) ISO designation: WOMX100508-D57 WSP45G FAQ What materials can this insert machine effectively? The WOMX100508-D57 WSP45G from Walter Tools is suitable for ISO groups P, M and S, meaning it can machine steel, stainless steel and heat‑resistant superalloys including titanium. Is the WSP45G grade coated and what benefit does that bring? Yes, the WSP45G belongs to the Tiger‑tec Gold series and features a PVD coating; this enhances wear resistance and supports a stable cutting edge for extended tool life in demanding operations. Which geometry is best for chip control with this insert? The Trigon 80° geometry paired with the D57 chipbreaker provides reliable chip formation and evacuation, improving stability in drilling and boring cycles. How does tolerance class M affect production? Tolerance class M ensures consistent dimensions and repeatability for the insert, supporting predictable offsets and reliable hole quality in serial production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and trade designations are the property of their respective owners. Brand names and protected designations are mentioned for explanation only; there is no connection between our company and the named brands. The offered article is original and brand‑new from the manufacturer. The Walter AG (marketed as Walter Tools) is one of the leading manufacturers of precision tools for metalworking and is part of the Sandvik Group.
WOMX120608-B57 WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKP35S grade for extended tool life and consistent performance; the Trigon 80° geometry and B57 chipbreaker ensure reliable chip control in demanding bore/drill operations. Order the WOMX120608-B57 WKP35S insert directly via Metav Werkzeuge or consult our specialists for application support. WOMX120608-B57 WKP35S — Bohr-/Aufbohrwendeschneidplatte for steel and cast iron by Walter Tools WOMX120608-B57 WKP35S is an indexable cutting insert designed for drilling and bore-enlarging applications on steel and cast iron Tiger·tec Silver coating for wear resistance WKP35S coated carbide grade for stability Trigon 80° geometry for secure seating 0.8 mm corner radius for controlled cutting Higher throughput with predictable edge life The combination of Tiger·tec Silver technology and the WKP35S grade delivers a balance between wear resistance and toughness that directly improves process stability. The coated carbide composition reduces abrasive wear when machining steel and cast iron, which translates into fewer insert changes and longer uninterrupted production cycles. This results in more consistent component tolerances and reduced overall machining costs through longer tool life and predictable maintenance intervals. Precise chip control and improved surface quality The Trigon 80° form together with the B57 chipbreaker provides effective chip forming and evacuation in interrupted or unstable cutting conditions. A 0.8 mm corner radius smooths engagement and helps avoid edge chipping when entering bores, while the insert geometry supports stable cutting forces for better concentricity and surface finish. For operators less familiar with indexable inserts, these features mean easier setup and fewer iterations to achieve the required hole quality. Ready for integration into standard tooling systems With tolerance class M and standard designation WOMX120608-B57 WKP35S, the insert fits common cutters and toolholders for drilling and boring operations. The P / K material compatibility means the same inventory can cover a broad material range, simplifying tool management. As a Walter Tools product, this insert benefits from the manufacturer’s field-proven development, offering reliable performance and consistent repeatability in production environments that demand high uptime. Contact Metav Werkzeuge today to discuss integrating the WOMX120608-B57 WKP35S into production workflows or to request cutting data; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: WOMX120608-B57-WKP35S-WALTER ISO designation: WOMX120608-B57 WKP35S Product type: Bohr-/Aufbohrwendeschneidplatte Manufacturer: Walter Tools Facts Size code: 12 Thickness code: 06 Corner radius: 0.8 mm Geometry angle: 80° Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Chipbreaker: B57 Material compatibility: P (steel) / K (cast iron) Execution: X FAQ What materials is this insert suitable for? The WOMX120608-B57 WKP35S insert is designed for machining steel (P) and cast iron (K) according to the grade and series specifications. Which geometry and chip control does the insert offer? This insert features a Trigon 80° geometry combined with a B57 chipbreaker, optimised for controlled chip formation in bore and drill enlargement operations. How does the Tiger·tec Silver series benefit production runs? The Tiger·tec Silver series on the WKP35S grade improves wear resistance and offers consistent edge life, reducing insert changes and stabilising machining processes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanation. There is no connection between our company and the named brands. The offered article is original, brand-new goods from the manufacturer (Walter Tools).
WOMX120608-B57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and robust Trigon 80° geometry for reliable chip control and extended tool life; order directly via Metav Werkzeuge or contact the consultants for application-specific advice. WOMX120608-B57 WSP45G drill/bore indexable insert — Walter Tools (Tiger‑tec Gold) The WOMX120608-B57 WSP45G is a Trigon 80° drill/bore indexable insert engineered for stable machining of steel, stainless steel and heat‑resistant alloys in demanding drilling and boring operations Tiger‑tec Gold PVD coating Trigon 80° insert geometry Edge radius 0.8 mm for stable cutting Suitable for Steel, stainless, superalloys Extended tool life through advanced coating technology The combination of the Tiger‑tec Gold series and the WSP45G coating grade provides enhanced wear resistance and heat management during heavy cutting conditions. The PVD-based coating reduces flank wear and supports secure chip formation when machining typical steels and more demanding alloys. This translates into longer tool life and fewer tool changes, improving machine uptime and reducing process costs while maintaining consistent surface quality. Stable cutting with optimised geometry and chip control The Trigon 80° form, paired with the B57 chipbreaker and an edge radius of 0.8 mm, ensures a robust cutting edge and reliable chip segmentation in interrupted cuts and deep bore entries. The chipbreaker is designed to direct and break chips efficiently, lowering the risk of built-up edge and improving evacuation in through‑tool and peripheral drilling setups. As a result, dimensional stability and repeatability are enhanced in serial production. Versatile performance across multiple materials Designed for applications in the ISO material groups P / M / S, this insert handles unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys including titanium. The grade geometry and coating are tuned for the typical heat generation and chip behaviour of these groups, offering secure edge stability in tough, adhesive or heat‑resistant materials. This versatility reduces the need for specialised grades across mixed‑material production runs. Practical notes for integration and handling The insert follows the designation WOMX120608-B57 WSP45G, with a plate size of 12 and a thickness code 06, execution X and tolerance class M, making it compatible with standard drill and boring toolholders designed for Trigon indexable inserts. Correct seat preparation and recommended clamping torque ensure repeatable performance; the B57 chipbreaker assists in predictable chip flow, and the coated carbide substrate supports consistent edge life under varied cutting parameters. Contact Metav Werkzeuge for tailored application advice or to request a quotation for Walter Tools Tiger‑tec Gold inserts — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: WOMX120608-B57-WSP45G-WALTER Article designation: WOMX120608-B57 Grade: WSP45G Series: Tiger‑tec Gold Product type: drill/bore indexable insert Facts Plate form: Trigon 80° Plate size: 12 Plate thickness: 06 Edge radius: 0.8 mm Chipbreaker: B57 Tolerance class: M Special features Coating: Tiger‑tec Gold (PVD) Material of insert: coated carbide Applicable material groups: P / M / S Execution: X Label/SKU: WOMX120608-B57 WSP45G Manufacturer: Walter Tools FAQ What materials can this insert machine effectively? The WOMX120608-B57 WSP45G insert is suitable for machining steel, stainless steel and heat‑resistant superalloys (ISO groups P / M / S), as specified by the Walter Tools Tiger‑tec Gold grade. Which chipbreaker is fitted and what is its benefit? This insert features the B57 chipbreaker, which promotes controlled chip formation and evacuation, reducing the risk of built‑up edge and improving surface finish in drilling and boring operations. How does the Trigon 80° geometry affect performance? The Trigon 80° form provides a sturdy cutting edge and improved entry behaviour for drilling and reaming, contributing to stable cutting forces and better tool life under interrupted or deep‑cut conditions. What identifying codes should be quoted when ordering? Please quote the full designation WOMX120608-B57 WSP45G and the SKU WOMX120608-B57-WSP45G-WALTER to ensure the correct Walter Tools Tiger‑tec Gold insert is supplied. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanatory purposes; there is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
WOMX120608-D57 WAK15 Wendeplatten - Walter Tools
Benefit from a dedicated solution for aluminium and non-ferrous machining that combines a sharp cutting grade, tailored chip control and a stable Trigon geometry; order directly via Metav Werkzeuge or contact the consultants for application-specific recommendations. WOMX120608-D57 WAK15 drilling/boring indexable insert, Trigon 80°, Walter Tools A WOMX120608-D57 WAK15 indexable insert engineered for productive aluminium and non-ferrous machining with Trigon 80° geometry. Trigon 80° geometry for stable engagement WAK15 uncoated carbide for aluminium machining Chipbreaker D57 reduces material adhesion 0.8 mm corner radius for fine surface quality Optimised grade and chip control for aluminium work The core advantage is the WAK15 uncoated carbide grade, developed within the Walter N-grade system for non-ferrous applications; this composition offers a very sharp cutting edge and predictable wear behaviour when machining aluminium and similar materials. Combined with the D57 chipbreaker, the insert minimises built-up edge and chip welding, which translates to fewer interruptions and a more consistent surface finish. For production environments that demand repeatability, this configuration reduces rework and improves cycle-time stability while maintaining effective tool life. Geometry engineered for secure cutting engagement and surface quality The Trigon 80° form and 0.8 mm corner radius provide a balanced contact geometry that supports secure tool engagement without excessive cutting forces. This shape reduces vibration at the tool tip and helps deliver a steady cutting line, supporting improved dimensional accuracy on bores and enlarged holes. The specified chip control and corner geometry together help achieve a fine surface texture on delicate non-ferrous components while keeping cutting forces manageable for standard drilling and boring toolholders. Practical integration into production and selection guidance As an indexable insert, the component fits common clamping systems designed for this family of inserts and is part of a broader series that simplifies grade matching for different non-ferrous alloys. The designation includes the chipbreaker code and geometry, making selection straightforward for process planners: specify the Trigon 80° form, chipbreaker D57, and WAK15 grade for aluminium-focused operations. For bespoke applications or mixed-material batches, Metav Werkzeuge can advise on optimal cutting data and holder compatibility to ensure the insert performs predictably across shifts. Contact Metav Werkzeuge for tailored advice on the Walter Tools WOMX120608-D57 WAK15 insert and to request application recommendations or stock information Technical Data Article number: WOMX120608-D57-WAK15-WALTER Product: drilling/boring indexable insert Label: Bohr-/Aufbohrwendeschneidplatte WOMX120608-D57 WAK15 Walter Tools Manufacturer: Walter Tools Series: Walter N-Sortensystem Facts Shape: Trigon 80° Size: 12 Thickness: 06 Corner radius: 0.8 mm Chipbreaker: D57 Tolerance class: M Grade: WAK15 Special features Material group: N (non-ferrous metals) Application: aluminium and non-ferrous metals Uncoated carbide Series: Walter N-grade system Version: X FAQ What materials is this insert suitable for? The WOMX120608-D57 WAK15 insert is intended for aluminium and other non-ferrous metals, reflecting the N material group and the WAK15 grade optimised for such alloys. How does the D57 chipbreaker affect machining performance? The D57 chipbreaker on the insert promotes controlled chip formation and reduces the tendency for chips to adhere to the cutting edge, improving surface finish and reducing stoppages during aluminium machining. Will the Trigon 80° shape improve hole accuracy? The Trigon 80° geometry provides a stable cutting contact and reduced tool deflection, which supports improved hole accuracy and repeatable bore dimensions when used with a suitable toolholder. What role does the 0.8 mm corner radius play? A 0.8 mm corner radius balances edge strength and surface quality: it helps avoid edge chipping while contributing to a fine surface finish on non-ferrous workpieces. Is the WOMX120608-D57 WAK15 compatible with standard indexable insert holders? Yes; the insert conforms to common indexable insert formats for its shape and size, but verification of holder compatibility and clamping style is recommended before mounting. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mention of brand names and trademarks is for identification and explanatory purposes only; there is no affiliation between our company and the mentioned brands. The offered article is an original, brand-new product from the manufacturer.
WOMX120608-D57 WKP25S WKP25S Wendeplatten - Walter Tools
Combine the Tiger‑tec Silver coating with a robust Trigon 80° geometry and optimised chip control to achieve consistent productivity and longer tool life; order the insert directly via Metav Werkzeuge or request application advice from the specialists. WOMX120608-D57 WKP25S – Trigon 80° drilling/boring indexable insert, Tiger‑tec Silver by Walter Tools The WOMX120608-D57 WKP25S is a Trigon 80° indexable insert engineered for drilling and boring operations in steel and cast iron, offering stable cutting performance and reliable chip management. Tiger‑tec Silver coated for longer tool life Trigon 80° geometry for stable cutting Optimised chip control with D57 breaker Compatible with steel and cast iron materials High productivity through advanced coating and grade The combination of Tiger‑tec Silver technology and the WKP25S grade provides an excellent balance between wear resistance and toughness, which results in extended tool life under typical drilling and boring conditions. The coated carbide substrate is optimised for thermal stability and abrasion resistance, so performance remains consistent even during interrupted cuts. Economic gains are achieved by reduced change‑over frequency and predictable end‑of‑life criteria, allowing planning of tool cycles and maintenance windows. Stable cutting thanks to Trigon geometry and precise edge form The Trigon 80° form with a defined corner radius minimises radial forces and enhances insert rigidity for deep drilling and boring applications. The D57 chipbreaker is designed to control chip shape and evacuation, reducing the risk of recutting and improving surface consistency. Where vibrations are a concern, the triangular platform delivers a stable seat in the holder and distributes cutting loads evenly, which helps maintain dimensional accuracy across production batches. Designed for steel and cast iron according to ISO 513 This insert is specified for the ISO material groups P (steel) and K (cast iron), addressing the particular heat generation and chip characteristics those materials exhibit. The grade and coating are selected to manage both adhesive and abrasive wear commonly encountered with unalloyed, alloyed steels and grey or nodular cast irons. Reference to ISO 513 and the P/K classification clarifies application limits and supports process planning for mixed‑material shops seeking a single, versatile cutting geometry. Consistent fitment and economical operation in machining cells Tolerance class M and the standardised form ensure repeatable seating in compatible holders for drilling and boring tool systems, supporting quick index changes and low setup times. The insert thickness code and size provide a compact cutting edge suited to stable machining envelopes; repeatable performance is promoted by the coated grade and the optimised chipbreaker. For integration into automated cells and manual setups alike, cutting data adjustment based on workpiece hardness and coolant strategy is recommended to achieve the best balance of throughput and tool life. Contact Metav Werkzeuge to discuss integrating Walter Tools Tiger‑tec Silver WKP25S inserts into the production process and receive tailored cutting data or application recommendations. Technical Data SKU: WOMX120608-D57-WKP25S-WALTER Article designation: WOMX120608-D57 WKP25S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKP25S Numbers / Core technical data Size: 12 Thickness code: 06 Corner radius: 0.8 mm Tolerance class: M Chipbreaker: D57 Special features Trigon 80° plate form Execution: X Applicable material groups: P (steel), K (cast iron) Suitable for drilling and boring indexable systems FAQ Which materials is the insert suitable for? The WOMX120608-D57 WKP25S insert by Walter Tools is suitable for ISO material groups P (steel) and K (cast iron), matching the design intent of the Tiger‑tec Silver grade. What benefits does the Tiger‑tec Silver coating deliver? Tiger‑tec Silver provides improved thermal stability and wear resistance for the WKP25S grade, helping to extend tool life and maintain consistent cutting performance in drilling and boring tasks. How does the D57 chipbreaker affect machining? The D57 chipbreaker shapes and controls chip flow to reduce recutting and ease evacuation, which supports better surface quality and lowers the likelihood of chip‑related interruptions when using the WOMX120608-D57 WKP25S. Is the Trigon 80° geometry suitable for deep boring operations? Yes, the Trigon 80° form gives a rigid seat and favourable force distribution, improving stability for deeper drilling and boring operations with this Walter Tools insert. What tolerances and dimensions are standard for this insert? The insert is supplied in tolerance class M with size 12 and thickness code 06; corner radius is 0.8 mm for precise edge definition on the WOMX120608-D57 WKP25S. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WOMX120608-D57 WKP35S WKP35S Wendeplatten - Walter Tools
High wear resistance and broad material coverage make this insert a reliable, cost‑effective choice for drilling and boring operations; the Tiger·tec Silver coating and sturdy trigon geometry support consistent tool life and stable chip control. Order the WOMX120608-D57 WKP35S directly via Metav Werkzeuge or ask the consultants if further application data are required. WOMX120608-D57 WKP35S Bohr-/Aufbohrwendeschneidplatte, Tiger·tec Silver – for steel and cast iron | Walter Tools The WOMX120608-D57 WKP35S is an indexable insert for drilling and boring applications, engineered for productive machining of steel and cast iron with a Trigon 80° form that promotes stable cutting and reliable chip evacuation. Tiger·tec Silver coating for wear resistance Trigon 80° form for stable cutting performance Suitable for steel and cast iron machining Corner radius 0.8 for robust edge strength Improved process security through advanced coating and grade The combination of the Tiger·tec Silver coating and the WKP35S grade delivers enhanced resistance to abrasive wear and thermally induced damage during continuous drilling and boring cycles. This coating technology reduces flank and crater wear, which in turn extends the effective tool life and lowers overall tooling costs. For operations where material mix includes both unalloyed and alloyed steels and cast iron, the coated carbide substrate supports predictable performance and fewer insert changes, contributing to a steadier production flow. Geometry that stabilises chip formation and surface quality A Trigon 80° insert shape with an integrated chipbreaker D57 yields controlled chip formation and reliable evacuation when producing holes or enlarging bores. The trigon geometry balances cutting edge strength with entry angles that reduce vibration tendency, helping to maintain consistent surface finish and bore tolerance. The 0.8 mm corner radius reinforces the cutting edge, improving resistance to mechanical shock and enabling more stable feeds without sacrificing surface integrity. Practical benefits for workshop efficiency and setup The insert’s compact dimensions and standard indexable format simplify inventory management and reduce setup time during tool changes. The tolerance class M and execution X indicate consistency in production batches, supporting predictable repeatability in clamping and indexed repositioning. Matching this grade to drilling tool bodies designed for Trigon inserts avoids unnecessary adaptations and shortens machine downtime, thereby increasing productive cutting hours per shift. Contact Metav Werkzeuge today to discuss how the Walter Tools WOMX120608-D57 WKP35S can be integrated into existing drilling and boring workflows or to request application-specific cutting data Technical data SKU: WOMX120608-D57-WKP35S-WALTER Designation: WOMX120608-D57 WKP35S Product type: Bohr-/Aufbohrwendeschneidplatte Brand: Walter Tools Series: Tiger·tec Silver Facts Insert size: 12 Thickness: 06 Corner radius: 0.8 Form angle: 80° Tolerance class: M Special features Grade: WKP35S Chipbreaker: D57 Geometry: Trigon 80° Material suitability: P / K (steel, cast iron) Execution: X FAQ What materials can this insert machine effectively? The WOMX120608-D57 WKP35S is specified for steel (P) and cast iron (K) machining, utilising the Tiger·tec Silver coating to handle typical heat and abrasion in these material groups. How does the Trigon 80° form influence drilling performance? The Trigon 80° geometry provides a robust cutting edge and favourable entry angle, which helps to reduce vibration and supports steady chip flow when using the WOMX120608-D57 WKP35S insert in drilling and boring operations. What role does the WKP35S grade play in tool life? The WKP35S grade, part of the Tiger·tec Silver family, combines a coated carbide substrate and optimised microstructure to improve wear resistance and offer predictable tool life for prolonged machining cycles. Is the corner radius suitable for roughing and finishing passes? The 0.8 mm corner radius on this insert offers a compromise between edge strength for roughing and the ability to maintain acceptable surface finish during finishing passes with appropriate feed selection. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is original, brand‑new goods of the manufacturer Walter Tools.
WOMX120608-D57 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a Trigon 80° geometry for reliable chip control and extended edge life; order the WOMX120608-D57 WSP45G directly via Metav Werkzeuge or consult our technical team for application-specific advice. WOMX120608-D57 WSP45G – Drilling/boring indexable insert, Trigon 80°, Tiger·tec Gold, Walter Tools The WOMX120608-D57 WSP45G is an indexable insert designed for drilling and boring that delivers stable cutting-edge performance across steel, stainless steel and heat-resistant alloys. Tiger·tec Gold coating for wear resistance Trigon 80° geometry for secure positioning Suitable for steel, stainless steel and superalloys Corner radius 0.8 mm for robust cutting edge Consistent performance for mixed-material machining The Tiger·tec Gold coating combined with a coated carbide substrate gives this insert consistent wear behaviour when machining a range of materials. Engineered for the typical stresses encountered when cutting steel and stainless steel, the grade supports steady chip formation and reduces the risk of edge build-up. For components where heat and toughness vary across the workpiece, the insert’s balance of hardness and toughness helps maintain process stability and predictable tool life, which in turn supports efficient production planning and reduced tool-change frequency. Geometry that enhances stability and accuracy With a Trigon 80° shape and a 0.8 mm corner radius, the insert provides robust edge support and positive seating in indexable toolholders, improving rotational and axial stability during drilling and boring operations. The D57 chipbreaker promotes controlled chip flow, lowering the likelihood of clogging in small-diameter holes and enhancing surface integrity. These geometric choices translate into fewer rejects and less rework, making the insert a practical option for demanding production environments where dimensional accuracy and repeatability matter. Versatility across demanding alloys and applications The WSP45G grade is a PVD-coated carbide developed to handle a varied material spectrum (P/M/S), including heat-resistant superalloys and titanium where cutting temperatures and tool stress are elevated. The material compatibility is a direct asset for mixed-series production or job shops that must process both standard steels and more challenging alloys without frequent tool changes. The insert’s design supports drilling and boring cycles where consistent chip control and edge life are essential to maintaining throughput and component quality. Application-focused benefits and operational considerations Because the insert is optimised for stable cutting and reliable edge life, it suits medium- to high-feed operations and serial production where uptime and predictable results are priorities. The combination of coating technology and geometry reduces the need for aggressive cutting parameter reductions, enabling shops to retain competitive cycle times while protecting the cutting edge. For tooling setups, ensure toolholder compatibility with Trigon 80° inserts and select cutting data that reflects the processed material group to maximise the insert’s performance. Contact Metav Werkzeuge to discuss how the WOMX120608-D57 WSP45G from Walter Tools can improve process stability in specific drilling and boring operations and to request detailed cutting-data recommendations Technical data SKU: WOMX120608-D57-WSP45G-WALTER Article designation: WOMX120608-D57 WSP45G Series: Tiger·tec Gold Grade: WSP45G Geometry: Trigon 80° Size: 12 Corner radius: 0.8 mm Thickness: 06 Chipbreaker: D57 Execution: X Tolerance class: M Substrate / material: P / M / S Facts Angle: 80° Corner radius: 0.8 mm Size designation: 12 Thickness code: 06 Tolerance class: M Special features PVD-coated carbide (Tiger·tec Gold) Suitable for steel, stainless steel and heat-resistant superalloys and titanium Trigon 80° form for positive locating and rigidity D57 chipbreaker for controlled chip formation Robust edge for demanding drilling/boring tasks FAQ What materials is this insert suitable for? The WOMX120608-D57 WSP45G is suitable for machining steel, stainless steel and heat-resistant superalloys (P / M / S), reflecting the grade’s design for varied material challenges. How does the Tiger·tec Gold coating benefit drilling operations? Tiger·tec Gold coating on the WOMX120608-D57 WSP45G enhances wear resistance and thermal stability, helping to maintain a stable cutting edge under elevated temperatures typical in drilling and boring. Which geometry advantages does the Trigon 80° bring to boring tools? The Trigon 80° form provides secure seating and improved rigidity in toolholders, reducing vibration and supporting consistent hole quality when using the WOMX120608-D57 WSP45G. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. The referenced article is an original, factory-new product of the manufacturer.
XDGT1303079R-D57 WSP45G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold PVD coating and a compact 0.7 mm corner radius for consistent chip control and long edge life; order directly via Metav Werkzeuge or consult our technical team for application-specific data. XDGT1303079R-D57 WSP45G milling indexable insert — Tiger·tec Gold PVD, for Stahl / rostfreier Stahl / superalloys (Walter Tools) XDGT1303079R-D57 WSP45G is a coated carbide milling insert designed for versatile face- and shoulder-milling applications in demanding materials Tiger·tec Gold PVD coating Versatile for Stahl, rostfreier Stahl and superalloys 15° relief angle for secure chip control 0.7 mm corner radius for robust edge High-performance coating that extends cutting intervals The insert features the Tiger·tec Gold PVD surface treatment, a high-performance coating engineered to reduce wear and improve thermal stability. This coating supports longer tool life under intermittent and continuous cuts, which translates into fewer tool changes and higher machine utilisation. For milling operations where heat and adhesion threaten edge integrity, the coated carbide grade offers predictable wear behaviour and stable cutting forces, helping to maintain cycle times and dimensional consistency on the shop floor. Broad material compatibility for flexible production planning Designed for use in material groups P / M / S, the grade is suited to machining Stahl (P), rostfreier Stahl (M) and heat-resistant superalloys or titanium (S). The WSP45G substrate balances toughness and hardness to manage the different demands of these groups: support for heavy chip loads in Stahl, resistance to built-up edge in rostfreier Stahl, and thermal stability for S-class alloys. This versatility reduces the need for multiple tool families and simplifies inventory while ensuring process security across varied workpieces. Geometry optimised for chip control and edge security With a 15° relief angle and a 0.7 mm corner radius, the insert geometry provides a reliable compromise between edge strength and cutting performance. The relief angle contributes to stable chip flow and reduced cutting forces, while the modest corner radius gives mechanical robustness against edge chipping during interrupted cuts. These geometric choices support consistent surface finish and repeatable part tolerances, particularly in operations requiring both roughing and finishing passes. Productivity advantages in everyday milling The combination of coated carbide grade and tailored geometry yields measurable efficiency gains: fewer tool changes, improved surface quality and reduced scrap rates. In practice, that means a more continuous production flow and lower per-part machining costs. The insert’s specification suits workshop environments aiming to increase output without sacrificing process reliability; technical parameters such as plate size and thickness are chosen to fit common cutter bodies and clamping systems, enabling straightforward retrofitting in existing tool setups. Contact Metav Werkzeuge for tailored recommendations on machining parameters and cutter compatibility for the Walter Tools Tiger·tec Gold insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: XDGT1303079R-D57-WSP45G-WALTER Manufacturer: Walter Tools Product type: Milling insert Series: Tiger·tec Gold Facts Relief angle: 15° Corner radius: 0.7 mm Plate size: 13 mm Thickness: 03 Special features Grade/coating: WSP45G (coated carbide, Tiger·tec Gold PVD) Material compatibility: P / M / S Tolerance class: G FAQ What materials can be machined with this insert? The XDGT1303079R-D57 WSP45G is rated for P / M / S — that is Stahl, rostfreier Stahl and heat-resistant superalloys/titanium — making it suitable for mixed-production environments. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold PVD coating on the insert reduces flank and crater wear and increases thermal resistance, which helps the Walter Tools grade maintain cutting-edge stability over longer cycles. Is the geometry suitable for interrupted cuts? Yes, the 0.7 mm corner radius combined with a 15° relief angle provides enhanced edge strength and chip control that is beneficial for interrupted and semi-continuous milling. Which cutter bodies accept the XDGT1303079R-D57 insert? The geometry and plate size (13 mm) are compatible with standard milling cutter systems designed for XDGT-type inserts; consult cutter specifications for clamping compatibility and seat design. What distinguishes the WSP45G grade from other grades? WSP45G is a versatile, PVD-coated carbide developed for milling where a balance of toughness and wear resistance is required; it supports stable chip formation and reliable cutting-edge life across multiple material groups. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XDGT1303080R-D57 WKP35S Wendeplatten - Walter Tools
Take advantage of the proven Tiger·tec Silver coating and the WKP35S grade for consistent wear resistance and stable chip formation; the compact 13 mm plate with a 15° relief angle and 0.8 mm corner radius supports reliable machining of Stahl and Gusseisen. Order the insert directly via Metav Werkzeuge or contact our team for application advice. XDGT1303080R-D57 WKP35S Fräswendeschneidplatte by Walter Tools — Tiger·tec Silver, for Stahl & Gusseisen XDGT1303080R-D57 WKP35S is a coated indexable milling insert designed for general steel and cast-iron applications, offering a balanced geometry for productive metalcutting. Tiger·tec Silver coating for wear resistance For Stahl and Gusseisen machining 15° relief angle for versatile cutting Corner radius 0.8 mm for stable edge Consistent performance through modern coating and grade The combination of Tiger·tec Silver surface technology and the WKP35S grade provides enhanced wear resistance and improved chip control, which reduces unexpected tool changes and helps maintain stable cycle times. The specified chipbreaker D57 is designed to support predictable chip formation when machining both Stahl and Gusseisen, making the insert a dependable choice where process stability and repeatability are priorities. Thanks to these features, the cutting edge retains form for longer, contributing to overall operational efficiency. Geometry tuned for reliable machining and process security A 15° relief angle together with a 0.8 mm corner radius delivers a compromise between edge strength and cutting performance: the relief angle supports a range of cutting conditions, while the corner radius protects the edge against chipping. The 13 mm plate size and coded thickness 03 suit compact tool holders and allow easy integration into existing toolsets. These geometric characteristics result in fewer interruptions for tool changes and a more consistent surface quality on workpieces, which in turn supports downstream processes and reduces rework. Clear specification and application guidance for procurement The insert is supplied in the XDGT1303080R-D57 WKP35S designation and belongs to the Tiger·tec Silver series; the material compatibility is stated as P / K, meaning suitability for unalloyed and alloyed steels as well as cast iron. For purchasers and process planners, this translates into a versatile inventory item that covers common ISO material groups without the need for multiple specialised grades. The WKP35S cutting-grade description emphasises economical machining with stable chip formation and broad material coverage, supporting predictable tool life and planning reliability. Contact Metav Werkzeuge today to discuss how the Walter Tools XDGT1303080R-D57 WKP35S insert can improve machining reliability and process stability — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: XDGT1303080R-D57-WKP35S-WALTER Product: Fräswendeschneidplatte Designation: XDGT1303080R-D57 WKP35S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP35S Facts Relief angle: 15° Corner radius: 0.8 mm Plate size: 13 Plate thickness: 03 Tolerance class: G Chipbreaker: D57 Special features Material compatibility: Stahl; Gusseisen Coating: Tiger·tec Silver Material of insert: P / K Series information: Serie: Tiger-tec Silver FAQ Which materials can be machined with this insert? The XDGT1303080R-D57 WKP35S insert is specified for P / K materials, covering common Stahl grades and Gusseisen, as indicated by its WKP35S designation. What coating and grade are used on the insert? The insert features the Tiger·tec Silver coating and the WKP35S cutting-grade to deliver improved wear resistance and consistent chip formation during steel and cast-iron machining. How does the chipbreaker D57 influence performance? The D57 chipbreaker is optimised for stable chip formation under typical conditions when machining Stahl and Gusseisen, helping to reduce interruptions for chip-related issues. What are the key geometric specifications to note? Key specs for the insert include a 15° relief angle, 0.8 mm corner radius and a 13 mm plate size, which together support a balanced combination of edge strength and cutting performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the brands mentioned. The offered item is original, brand-new goods from the manufacturer Walter Tools.
XDGT16T3095R-D57 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, reliable chip control and a robust 0.9 mm corner radius for consistent productivity in demanding milling operations; order directly via Metav Werkzeuge or consult the sales team for application-specific recommendations. XDGT16T3095R-D57 WSP45G milling insert – Walter Tools, Tiger·tec Gold, for steel, stainless steel and superalloys A XDGT16T3095R-D57 WSP45G milling indexable insert designed for versatile face and peripheral milling in steels, stainless steels and heat-resistant superalloys, offering stable cutting with Tiger·tec Gold coating Tiger·tec Gold PVD coating Suitable for steel, stainless steel, superalloys 15° clearance for stable cutting 0.9 mm corner radius for edge strength High process stability and extended tool life through advanced coating and geometry The Tiger·tec Gold PVD technology delivers a balanced combination of wear resistance and thermal stability, which translates into longer tool life and fewer index changes during production. The insert geometry is optimised for reliable chip control, reducing the risk of built-up edge when machining steel and stainless steel. With a defined relief angle of 15°, the cutting action remains predictable under varying feed and speed conditions, enabling tighter process windows and improved productivity. This technical consistency helps keep set-up times low and lifecycle costs under control. Consistent surface finish and reliable edge integrity for challenging materials A 0.9 mm corner radius contributes to robust edge strength and helps maintain surface quality during interrupted cuts or hard-turned zones. The chipbreaker D57 supports efficient chip formation across a broad range of materials, including heat-resistant alloys and superalloys, where thermal load and tough chip behaviour can compromise performance. The coated carbide substrate of the insert provides a stable cutting edge that supports higher cutting speeds without sacrificing dimensional accuracy, so machining results benefit from both productivity and repeatability. Versatility in application and clear technical benefits for workshop planning The insert is specified for P / M / S material groups, meaning it is suitable for unalloyed and alloyed steel, stainless steel and high-temperature superalloys including titanium-based materials. Its standardised designation and form factor simplify toolholder selection and inventory management, while the documented tolerance class ensures predictable seating and repeatable indexing. For engineers seeking measurable improvements, the result is fewer rejects and more predictable cycle times thanks to the combination of geometry, coating and material grade. Choose Walter Tools Tiger·tec Gold inserts for consistent productivity — contact Metav Werkzeuge for tailored cutting parameters and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: XDGT16T3095R-D57-WSP45G-WALTER Designation: XDGT16T3095R-D57 ISO designation: XDGT16T3095R-D57 WSP45G Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 0.9 mm Insert size: 16 Thickness: T3 Tolerance class: G Special features Series: Tiger·tec Gold Grade: WSP45G (PVD-coated carbide) Chipbreaker: D57 Material suitability: P / M / S (steel, stainless steel, superalloys) Execution: T (T-type geometry) FAQ What materials is this insert suitable for? The XDGT16T3095R-D57 WSP45G insert is designed for machining steel, stainless steel and superalloys, matching the P / M / S groups for versatile milling tasks. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold coating on the WSP45G grade improves wear resistance and thermal stability, which leads to longer tool life and steadier cutting performance when machining demanding materials. What does the chipbreaker D57 provide during milling? Chipbreaker D57 supports controlled chip formation and evacuation, reducing entanglement and improving surface finish, particularly in interrupted cuts or tougher alloys. Which cutting parameters should be prioritised for best results? Prioritise a stable feed per tooth and monitor cutting speed in relation to material thermal properties; the combination of 15° relief and WSP45G grade allows for higher speeds in many steel applications while maintaining edge security. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
XDGT16T3100R-D57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, robust WKP35S grade and precise geometry for stable, productive milling of Stahl and cast iron components; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. XDGT16T3100R-D57 WKP35S Milling insert — Tiger·tec Silver, for Stahl and cast iron | Walter Tools The XDGT16T3100R-D57 WKP35S is a coated milling insert designed for high-productivity roughing and semi-finishing operations in Stahl and cast iron, combining a wear-resistant grade with a geometry optimised for predictable chip control. Tiger·tec Silver coating for long life Suitable for Stahl and cast iron machining 15° clearance angle for stable cutting R1 corner radius with D57 chipbreaker Higher throughput thanks to proven coating technology The combination of the Tiger·tec Silver coating and the WKP35S grade delivers improved wear resistance under typical milling conditions. Coating technology reduces adhesive and abrasive wear, which translates into longer tool life and fewer indexings. This effect is especially relevant in interrupted cuts or when batch sizes require consistent performance; the result is measurable productivity gains and a lower cost per component because the insert sustains cutting forces more reliably. Predictable surface quality and repeatable tool life A carefully engineered chipbreaker and an R1 corner radius produce consistent chips and stable cutting forces, which helps to maintain surface finish from the first to the last workpiece. The 15° clearance angle contributes to reduced rubbing and stable engagement, so dimensional repeatability is supported across runs. These geometric choices make the insert a dependable option when predictable results and process stability are priorities. Versatile use across Stahl and cast iron applications The grade is specified for P and K groups, meaning it is suited to both Stahl (unalloyed and alloyed steels) and cast iron workpieces. Coated carbide substrate properties enable handling of the heat and chip formation typical of Stahl machining, while the chipbreaker design copes with the often short, brittle chips of cast iron. This versatility reduces tooling complexity and simplifies inventory for shops processing mixed batches. Geometry and specification that aid process control Key technical choices such as the tolerance class G, thickness T3, and the D57 chipbreaker aim to give machine shops straightforward process set-up and consistent clamping results. The insert’s nominal size (16 mm) and the combination of coating and grade permit a balance between material removal rate and edge stability. When matched with appropriate cutter bodies, the insert supports robust milling strategies with clear specification data for programming and planning. Contact Metav Werkzeuge for application advice on Walter Tools Tiger·tec Silver inserts and to arrange a tailored recommendation for specific Stahl or cast iron machining tasks. Technical Data SKU: XDGT16T3100R-D57-WKP35S-WALTER Article designation: XDGT16T3100R-D57 WKP35S Product type: Milling insert (Fräswendeschneidplatte) Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP35S Facts Insert size: 16 mm Clearance angle: 15° Corner radius: 1 mm Thickness: T3 Chipbreaker: D57 Tolerance class: G Special features Coating: Tiger·tec Silver Carbide type: coated carbide (WKP35S) Suitable for: Stahl and cast iron Execution: T Intended use: roughing and semi-finishing milling Series benefits: enhanced wear resistance and process stability FAQ What materials is this insert suitable for? The XDGT16T3100R-D57 WKP35S insert is designed for machining Stahl and cast iron, with the WKP35S grade optimised for coated-carbide performance in those ISO groups. What are the key geometry values to consider for setup? Note the 15° clearance angle, 1 mm corner radius (R1) and T3 thickness; these parameters affect cutter engagement and should be matched to the cutter body and machining strategy. Which coating is used and what advantage does it offer? The insert uses the Tiger·tec Silver coating, which improves wear resistance and promotes consistent cutting performance across extended tool life. Is this insert suitable for interrupted cuts and heavy milling? Yes — the combination of WKP35S grade and the D57 chipbreaker supports robust performance in interrupted and demanding milling tasks. Can the insert be used in mixed production of Stahl and cast iron? The insert’s specification targets both P and K material groups, making it a practical choice where both Stahl and cast iron components are produced. The Walter AG (Markenauftritt: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
XDGT16T3100R-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of robust chip control, the Tiger·tec Gold coating and a compact 15° relief geometry for consistent tool life and process stability; order the insert directly via Metav Werkzeuge or ask the consultants for tailored machining parameters. XDGT16T3100R-D57 WSP45G indexable milling insert — Tiger·tec Gold, versatile for Stahl, rostfreier Stahl and Superlegierungen | Walter Tools A XDGT16T3100R-D57 WSP45G indexable milling insert designed for versatile milling tasks in demanding materials, combining a tough PVD-grade with a geometry optimised for stable chips and reliable cutting edges Tiger·tec Gold PVD-coated grade WSP45G Stable chip control with D57 chipbreaker 15° relief angle for secure cutting Corner radius 1 mm, insert size 16 High-performance coating and grade for sustained productivity The combination of the Tiger·tec Gold series and the WSP45G grade provides a PVD coating and substrate engineered for a balance of toughness and wear resistance. This results in a cutting edge that resists premature chipping while maintaining life under thermally and mechanically demanding conditions. The grade is specifically formulated for milling operations in Stahl, rostfreier Stahl and high-temperature alloys, offering consistent performance where heat generation and difficult chip forms typically shorten tool life. The result is fewer tool changes and improved machine uptime while keeping surface integrity of the workpiece. Geometry and chip control that improve process stability The insert’s D57 chipbreaker, combined with a relief angle of 15°, produces a controlled chip flow that reduces the risk of built-up edge and erratic cutting forces. A corner radius of 1 mm and an insert size of 16 mm deliver a safe balance between edge strength and surface finish; the modest radius supports finishing passes while permitting higher feed rates when required. The insert thickness T3 and tolerance class G ensure repeatable seating in the cutter body and predictable engagement, contributing to quieter operation, steady material removal and more uniform batch-to-batch results. Practical benefits for production and job-shop environments Specifically developed as a versatile milling solution, this insert supports a wide spectrum of milling tasks from medium-duty roughing to precision semi-finishing in challenging materials. The robust grade and optimised chipformer reduce the occurrence of unexpected interruptions, which lowers process costs and increases throughput. For engineers and machinists aiming for reproducible component quality, the insert’s stability and coating technology translate into measurable gains in productivity and tool life while simplifying insert selection across mixed-material production runs. Contact Metav Werkzeuge for a cutting-edge recommendation on integrating the XDGT16T3100R-D57 WSP45G into existing toolholders or for assistance in optimising feeds and speeds for specific materials Technical Data Article number / SKU: XDGT16T3100R-D57-WSP45G-WALTER Product label: Fräswendeschneidplatte XDGT16T3100R-D57 WSP45G Walter Tools Series: Tiger·tec Gold Grade: WSP45G Manufacturer: Walter Tools Designation: XDGT16T3100R-D57 WSP45G Facts Relief angle: 15° Corner radius: 1 mm Insert size: 16 mm Thickness: T3 Chipbreaker: D57 Tolerance class: G Special features PVD-coated hardmetal grade Versatile for Stahl, rostfreier Stahl and Superlegierungen / Titan Tough, all-round milling grade for varied applications Designed for stable chip formation and secure cutting edge Series: Tiger·tec Gold Execution: T FAQ What materials is this insert suitable for? The XDGT16T3100R-D57 WSP45G by Walter Tools is suited for machining Stahl, rostfreier Stahl and heat-resistant alloys including Titan and similar Superlegierungen. What does the WSP45G grade offer in daily production? WSP45G, part of the Tiger·tec Gold family, provides a PVD-coated composition that balances toughness and wear resistance, offering longer tool life and reliable performance in milling operations with variable thermal loads. How does the D57 chipbreaker affect machining? The D57 chipbreaker promotes organised chip formation and evacuation, reducing the risk of built-up edge and enabling steadier cutting forces—this supports consistent surface quality and fewer interruptions. What are the key geometric data of the insert? Key geometry values include a 15° relief angle, 1 mm corner radius and a 16 mm insert size with a T3 thickness and tolerance class G. Is this insert appropriate for both roughing and finishing? Yes; the grade and chipformer combination make the insert versatile for a range of milling tasks from medium roughing to semi-finishing, delivering a compromise between edge strength and surface finish. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XDGT2004125R-D57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WKP35S grade for consistent chip control and compatibility with steel and cast iron to maintain high throughput and low tooling costs; order the insert directly via Metav Werkzeuge or consult our specialists for application support. XDGT2004125R-D57 WKP35S milling insert (for steel & cast iron) – Walter Tools The XDGT2004125R-D57 WKP35S is a coated carbide milling insert from the Tiger·tec Silver series, engineered for robust performance in roughing and finishing operations on steel and cast iron. Tiger·tec Silver coating for extended tool life WKP35S grade for reliable chip control Suitable for steel and cast iron machining 15° relief angle and 1.2 mm corner radius High-efficiency cutting for steel and cast iron applications The Tiger·tec Silver coating combined with the WKP35S substrate delivers a balance of wear resistance and toughness suited to ISO group P (steel) and K (cast iron) materials. As a coated carbide insert, the geometry and cutting edge treatment are tailored to manage the heat and chip formation typical of steel machining while resisting the abrasive nature of grey and nodular cast irons. This results in stable cutting conditions, fewer tool changes and more predictable cycle times — clear advantages for batch production and mixed-series manufacturing. Improved component finish and repeatable tool life A 15° relief angle and a 1.2 mm corner radius contribute directly to surface integrity and edge strength. The relief angle reduces rubbing on the flank, lowering friction and heat transfer to the workpiece, which helps preserve dimensional accuracy. The corner radius supports a smoother transition between passes and increases edge robustness, reducing the risk of chipping under intermittent or interrupted cuts. Together, these features support consistent surface finish and extend the interval between regrinds or insert changes. Process reliability that supports productivity and cost control The insert’s design aims to minimise unplanned downtime through stable chip control and predictable wear behaviour. Reduced edge breakdown and controlled flank wear translate into longer effective tool life and fewer scrap parts. For production environments where cycle time and reproducibility are critical, the combination of coating technology and grade selection helps lower unit machining costs by increasing the net machining time per insert. For tooling engineers, this means fewer routine interventions and a more efficient use of machine hours. Practical guidance for selection and use The insert is suitable for a range of milling applications on steels and cast irons as defined by ISO groups P and K. When planning an operation, match cutter geometry, feed and speed to the insert grade and the workpiece condition: the Tiger·tec Silver coating favours moderate to high cutting speeds with good thermal stability, while the WKP35S grade supports reliable chip formation in both continuous and segmented chips. For application-specific optimisation or if any uncertainty exists about compatibility with particular workpiece alloys or cutter bodies, technical advice is available from Metav Werkzeuge to ensure correct selection and setup. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Silver inserts and to request the XDGT2004125R-D57 WKP35S for enhanced milling reliability Technical data Article number: XDGT2004125R-D57-WKP35S-WALTER Designation: XDGT2004125R-D57 WKP35S Product: Fräswendeschneidplatte / milling insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP35S Application: Steel (P), Cast iron (K) Data Relief angle: 15° Corner radius: 1.2 mm Insert size: 20 Thickness code: 04 Chipbreaker: D57 Tolerance class: G Special features Coating: Tiger·tec Silver Substrate: coated carbide Material suitability: steel and cast iron Execution: T Range: WKP35S grade for balanced wear resistance and toughness FAQ What materials is this insert suitable for? The XDGT2004125R-D57 WKP35S from Walter Tools is designed for ISO groups P and K, making it suitable for machining a wide range of steels and cast irons. Which series and grade does the insert belong to? This insert belongs to the Tiger·tec Silver series and uses the WKP35S grade, a coated carbide combination optimised for process reliability. What are the key geometric specifications to note? Important dimensions are the 15° relief angle and a 1.2 mm corner radius; these influence surface finish, edge strength and cutting stability. Can the insert be used for both roughing and finishing? Yes, the combination of coating and geometry provides a compromise between toughness and wear resistance that is suitable for both roughing and many finishing tasks in steel and cast iron. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating improves thermal stability and wear resistance, which supports longer tool life and more consistent machining results under elevated cutting speeds. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned solely for explanatory purposes and do not imply any affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
XDGT2004125R-D57 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, precise D57 chip control and the 15° relief for consistent productivity; order the insert directly via Metav Werkzeuge or contact the consultants for application advice. XDGT2004125R-D57 WSP45G indexable milling insert — Tiger·tec Gold, 15° relief (Walter Tools) The XDGT2004125R-D57 WSP45G is an indexable milling insert engineered for versatile milling of Stahl, rostfreier Stahl and heat‑resistant superalloys in industrial machining. Tiger·tec Gold PVD coating for edge durability WSP45G grade for Stahl, rostfreier Stahl and superalloys D57 chipbreaker for controlled chip formation 15° relief and 1.2 mm corner radius for strength High cutting performance and longer edge life for demanding milling The combination of the WSP45G grade and Tiger·tec Gold coating provides a robust solution for milling tasks that demand both wear resistance and stable cutting edges. The PVD-based surface treatment increases resistance to abrasion and thermal softening, which translates into longer tool life and fewer indexings during production runs. With the integrated D57 chipbreaker and the defined 15° relief angle, the geometry promotes consistent chip formation and evacuation, improving process reliability and reducing the risk of built‑up edge in operations on tougher materials. Reliable material coverage and predictable machining behaviour This insert is specified for the ISO material groups P / M / S, i.e. for Stahl, rostfreier Stahl and heat‑resistant superalloys (including Titan variants), making it suitable for mixed production environments. The WSP45G grade is formulated for toughness and stable cutting performance where heat and material ductility are challenges. By selecting this grade and the D57 chipformer, workshop planners gain a predictable performance window: better surface finishes at controlled feeds and improved security against catastrophic edge failure when machining sticky or heat‑sensitive alloys. Process efficiency, compatibility and practical benefits on the shop floor With a 1.2 mm corner radius and a nominal plate size of 20 mm, the geometry balances strength and cutting detail, allowing for both finishing and semi‑roughing passes where tool life is critical. The insert’s execution code T and tolerance class G ensure consistent seating and repeatable indexing in compatible cutter bodies. As a member of the Tiger·tec Gold series from Walter Tools, the insert offers the operational advantages of fewer tool changes, repeatable results and stable performance across varied workpiece materials — aiding throughput and lowering per‑part tooling costs. For reliable milling performance with Tiger·tec Gold technology, contact Metav Werkzeuge for tailored recommendations and application support regarding the XDGT2004125R-D57 WSP45G insert Technical data SKU: XDGT2004125R-D57-WSP45G-WALTER Label: Fräswendeschneidplatte XDGT2004125R-D57 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Gold Grade: WSP45G Execution: T Chipbreaker: D57 Tolerance class: G Material groups: P / M / S Relief angle: 15° Corner radius: 1,2 Plate size: 20 Plate thickness: 04 ISO designation: XDGT2004125R-D57 WSP45G Facts Relief angle: 15° Corner radius: 1.2 mm Plate size: 20 mm Plate thickness: 04 Tolerance class: G Special features Tiger·tec Gold PVD coating technology WSP45G: tough, versatile coated carbide grade Suitable for Stahl, rostfreier Stahl and superalloys D57 chipbreaker for stable chip control Part of Walter Tools Tiger-tec Gold series Execution code T for standard seating FAQ Is this insert suitable for stainless steel applications? Yes. The WSP45G grade and Tiger·tec Gold technology are specified for M (rostfreier Stahl), so the XDGT2004125R-D57 WSP45G insert is designed to provide stable cutting and controlled chip formation when machining stainless materials. What is the benefit of the Tiger·tec Gold coating? The Tiger·tec Gold PVD coating enhances wear resistance and thermal protection of the cutting edge on the XDGT2004125R-D57 WSP45G, resulting in longer edge life and improved process reliability under higher temperatures and abrasive conditions. How does the D57 chipbreaker affect milling results? The D57 chipbreaker on this insert promotes predictable chip separation and evacuation, which reduces the likelihood of chip entanglement and helps maintain consistent surface quality during both finishing and semi‑roughing operations. Which material groups does the insert cover and what does P/M/S mean? The insert covers ISO groups P / M / S: P = Stahl (unalloyed and alloyed steels), M = rostfreier Stahl, S = heat‑resistant superalloys and Titan. The XDGT2004125R-D57 WSP45G is formulated to handle the thermal and mechanical challenges typical of these groups. What are the key geometric specifications of the insert? The XDGT2004125R-D57 WSP45G has a 20 mm plate size, a 1.2 mm corner radius and a 15° relief angle, combining edge strength and accessibility for a broad range of milling tasks. Manufacturer: Walter Tools; Headquarters: Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand‑new goods from the manufacturer.
XDGT2004127R-D57 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold PVD coating, proven suitability for steel, stainless steel and superalloys, and precise chip control for efficient milling operations — order directly via Metav Werkzeuge or consult our specialists for selection and application advice. XDGT2004127R-D57 WSP45G milling insert — Tiger·tec Gold PVD, 15° relief | Walter Tools The XDGT2004127R-D57 WSP45G is a coated milling insert engineered for versatile face and shoulder milling of steel, stainless steel and heat‑resistant alloys in demanding production environments. Tiger·tec Gold PVD coating for longer life Versatile for steel, stainless steel and superalloys 15° relief angle for improved chip control Greater productivity through advanced coating technology The Tiger·tec Gold grade WSP45G offers a PVD‑based coating on coated carbide, developed for a balance of toughness and thermal stability. This combination reduces flank wear and extends usable life under the thermal loads typical of machining steels and stainless grades. By favouring a tougher coating architecture, the insert supports reliable material removal rates and contributes to a more predictable tool life curve in continuous production. Stable cutting behaviour and reliable chip management The geometry with a 15° relief angle and the integrated D57 chipbreaker deliver consistent chip formation and evacuation. The chipbreaker design helps avoid built‑up edge on harder stainless grades and promotes stable cutting forces in interrupted cuts. A defined corner radius (1.2 mm) improves edge strength for shoulder passes and light finishing, reducing the risk of premature edge chipping while maintaining surface quality. Versatility for mixed‑material series and process security With designation XDGT2004127R‑D57 and series Tiger·tec Gold, this insert is specified for the ISO groups P / M / S, covering unalloyed and alloyed steel, stainless steel and high‑temperature alloys such as titanium and nickel‑based superalloys. The combination of grade and geometry makes it a practical choice where job shops and production lines require a single indexable solution to cover several workpiece materials, helping to lower tool change frequency and simplify tool inventories. Contact Metav Werkzeuge to check application fit and order Tiger·tec Gold inserts (quote SKU XDGT2004127R‑D57‑WSP45G‑WALTER); email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: XDGT2004127R-D57-WSP45G-WALTER Designation: XDGT2004127R-D57 Type: Fräswendeschneidplatte Brand: Walter Tools Grade: WSP45G Facts Relief angle: 15° Corner radius: 1.2 mm Insert size: 20 mm Tolerance class: G Special features Series: Tiger·tec Gold Applicable materials: P / M / S Coating: coated carbide (PVD) Chipbreaker: D57 Execution: T FAQ Which materials is this insert suitable for? The insert is suitable for machining materials in ISO groups P, M and S — covering steel, stainless steel and heat‑resistant superalloys with the Tiger·tec Gold WSP45G grade. What advantages does the WSP45G grade provide? WSP45G is a PVD‑coated, tough grade designed for milling; the Tiger·tec Gold coating improves wear resistance while maintaining edge stability in mixed‑material production. How does the D57 chipbreaker affect machining? The D57 chipbreaker promotes controlled chip formation and evacuation, reducing built‑up edge tendencies on stainless grades and improving process stability during continuous milling. Is the corner radius suitable for finishing passes? The 1.2 mm corner radius gives a robust cutting edge for shoulder milling and light finishing, balancing edge strength with surface quality. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is original and factory‑new.
XDGT2405150R-D57 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Silver coating and the WKP35S grade for sustained productivity when machining steel and cast iron; the 15° clearance angle and 1.5 corner radius help secure consistent surface quality and predictable tool life. Order the insert directly via Metav Werkzeuge or request advice from our consultants if clarification is needed. XDGT2405150R-D57 WKP35S indexable milling insert — Tiger·tec Silver, for steel & cast iron | Walter Tools The XDGT2405150R-D57 WKP35S is an indexable milling insert engineered for high-productivity face and shoulder milling in steel and cast iron, combining a modern coating system with a chipbreaker optimised for stable cut conditions. Tiger·tec Silver coating for enhanced wear resistance WKP35S grade for reliable edge stability 15° clearance angle for secure chip control Suitable for steel and cast iron machining Longer cutting life through advanced coating technology The combination of the Tiger·tec Silver coating and the WKP35S cutting grade provides a robust wear layer on a coated cemented carbide substrate, designed to resist abrasive wear in demanding milling operations. This results in longer intervals between index changes and fewer unscheduled tool interventions, which supports higher machine uptime. The coating’s thermal and mechanical resilience contributes directly to stable edge integrity when machining steel and cast iron, reducing the risk of premature flank wear. Predictable surface finish and dimensional consistency A corner radius of 1.5 together with a defined clearance geometry ensures consistent contact conditions between workpiece and insert. This controlled geometry reduces vibration sensitivity and promotes a uniform surface finish across successive passes. The 15° clearance angle helps maintain cutting stability, while the grade’s toughness lowers the probability of chipping during interrupted cuts — a practical advantage for repeatable part quality in production runs. Efficient chip control for higher metal removal rates The integrated D57 chipbreaker is tailored for the typical chip forms encountered in P and K groups, enabling effective chip segmentation and evacuation. That chip control, combined with the mechanical stability of the WKP35S grade, allows for aggressive machining parameters where appropriate, improving productivity without compromising process reliability. In sum, the insert supports a balanced trade-off between cutting speed and tool life for typical milling tasks. Practical application notes for workshop integration Tolerance class G and the listed execution T mean the insert fits common Walter-compatible toolholders with known repeatability. The plate size 24 and thickness 05 align the insert with industry-standard toolbody configurations, simplifying inventory management. For users requiring exact process data or parameter tables, Metav Werkzeuge can supply cutting recommendations based on workpiece material and machine characteristics to ensure the tool is used in the most efficient operating window. For tailored tooling solutions with Walter Tools' Tiger·tec Silver inserts, contact Metav Werkzeuge for expert consultation and ordering at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data SKU: XDGT2405150R-D57-WKP35S-WALTER Article label: Fräswendeschneidplatte XDGT2405150R-D57 WKP35S Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Silver Grade: WKP35S Core specifications Free angle: 15° Corner radius: 1.5 Plate size: 24 Thickness: 05 Chipbreaker: D57 Special features Coated cemented carbide (Tiger·tec Silver) Material suitability: P / K (steel and cast iron) Tolerance class: G Execution: T ISO designation: XDGT2405150R-D57 WKP35S FAQ Which materials can be machined with this insert? The XDGT2405150R-D57 WKP35S is specified for ISO groups P and K, making it suitable for machining a broad range of steel grades and cast iron components. What coating and grade does the insert use? The insert uses the Tiger·tec Silver coating and the WKP35S grade, a coated cemented carbide formulation optimised for wear resistance and edge stability in milling applications. What are the key geometry values to consider? Key geometry includes a 15° free angle, a 1.5 corner radius, plate size 24, thickness 05, and a D57 chipbreaker, which together influence cutting forces and surface finish. Is the insert suitable for heavy material removal and interrupted cuts? The WKP35S grade provides a balance of toughness and wear resistance that supports higher metal removal rates and offers improved resistance to chipping in interrupted milling operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes and do not indicate any affiliation between our company and the named manufacturers. The offered article is original, brand-new merchandise supplied by the stated manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com