XDMT2405150R-F55 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, the WKP35G grade and a 15° clearance angle for productive machining of steel and cast iron — order the insert directly via Metav Werkzeuge or consult our specialists for application support. XDMT2405150R-F55 WKP35G milling indexable insert — Tiger‑tec Gold, 15° clearance (Walter Tools) The XDMT2405150R-F55 WKP35G is a coated carbide milling insert engineered for reliable, high‑productivity machining of steel and cast iron in industrial milling applications Tiger‑tec Gold coating for wear resistance WKP35G grade — for steel and cast iron 15° clearance angle for secure cutting 1.5 mm corner radius for improved finish Durable coating and grade for longer cutting cycles The combination of the Tiger‑tec Gold coating and the WKP35G carbide grade provides a balance of wear resistance and stable edge life that reduces tool changes and lowers cost per component. The coated carbide construction is designed to manage the heat and abrasive wear typical when turning and milling steel and cast iron, so production runs remain consistent. This material pairing translates into fewer stoppages for insert replacement and a measurable uplift in throughput for batch work. Geometry engineered for controlled chip formation and surface quality A 15° clearance angle together with a dedicated chipbreaker F55 improves chip flow and reduces cutting forces, which supports higher feed rates and safer machining. The 1.5 mm corner radius helps to distribute cutting loads and produces a reliable surface finish without aggressive edge degradation. These geometric features are particularly beneficial where repeatable dimensional accuracy and good surface integrity are required in short-cycle production or mixed‑batch environments. Practical advantages for workshop and production planning The insert’s designation and form factor simplify inventory and tool selection: the type supports standard toolholders and fits common milling toolholders for productive changeover. As a coated, indexable solution, the insert offers multiple effective cutting edges per body, enabling cost‑efficient use and quick reindexing during shifts. The overall result is higher process reliability and predictable tool life, helping to plan machining cycles and reduce unexpected downtime. Contact Metav Werkzeuge for tailored application advice and specify the Walter Tiger‑tec Gold WKP35G insert (XDMT2405150R-F55 WKP35G) to ensure optimal results on steel and cast iron — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: XDMT2405150R-F55-WKP35G-WALTER Designation: XDMT2405150R-F55 WKP35G Product type: Fräswendeschneidplatte (milling indexable insert) Manufacturer: Walter Tools Series: Tiger‑tec Gold Core data Clearance angle: 15° Corner radius: 1.5 mm Plate size: 24 Plate thickness: 05 Tolerance class: M Special features Grade: WKP35G Chipbreaker: F55 Execution: T Material suitability: P / K (steel and cast iron) Coating/type: coated carbide FAQ What materials is this insert suitable for? The XDMT2405150R-F55 WKP35G insert is tailored for steel (P) and cast iron (K) applications, utilising the Tiger‑tec Gold coated carbide grade WKP35G to handle typical heat and chip‑formation behaviours. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on this milling insert reduces abrasive wear and extends cutting edge life, which supports longer uninterrupted machining cycles and improved process stability. What is the purpose of the F55 chipbreaker? The chipbreaker F55 promotes controlled chip formation and evacuation during milling, lowering cutting forces and helping to maintain consistent surface quality on machined parts. Can the insert be used in standard toolholders? Yes, the insert’s form and designation XDMT2405150R-F55 WKP35G conform to common indexable milling insert formats and are compatible with standard holders designed for this geometry. How does the 1.5 mm corner radius affect machining? The 1.5 mm corner radius distributes cutting loads more evenly, improving surface finish and edge robustness, particularly useful when seeking repeatable part quality across production batches. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only. There is no affiliation between our company and the manufacturers mentioned. The item offered is an original, factory‑new product of the manufacturer Walter Tools.
XDMT2405150R-F55 WSM35G T Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WSM35G grade for secure chip control and improved tool life; the 15° relief and 1.5 mm corner radius ensure consistent surface quality when machining stainless steels and heat‑resistant alloys. Order this specialised insert directly via Metav Werkzeuge or consult our advisors for process recommendations. XDMT2405150R-F55 WSM35G milling insert — Walter Tools, Tiger‑tec Gold, for stainless steel & superalloys The XDMT2405150R-F55 WSM35G is a milling indexable insert engineered for demanding roughing and semi‑finishing operations in stainless steels and heat‑resistant superalloys; designed to combine process security with predictable tool life. Tiger‑tec Gold coating for edge stability WSM35G grade for stainless and superalloys 15° relief angle for reliable cutting 1.5 mm corner radius for consistent finish Reliable chip control for stable production The Tiger‑tec Gold technology and WSM35G composition focus on stable chip formation and a resilient cutting edge, which reduces unexpected interruptions in series production. The insert’s F55 chipbreaker geometry channels chips reliably during heavy cuts, lowering the risk of built‑up edge and improving toolpath consistency. For those managing production flows, this translates into fewer tool changes and steadier component quality, supporting higher overall productivity and repeatability. Built for hard‑to‑machine materials with reduced risk Designed specifically for materials classified under ISO groups M and S, the grade addresses the challenges of stainless steels and heat‑resistant superalloys or titanium. The coating and substrate combination provide thermal and mechanical resistance needed where heat evacuation is limited and cutting forces are elevated. As a direct result, operators can expect improved edge life in cladding, duplex and nickel‑based alloys, depending on the selected machining parameters and insert geometry. Geometry that preserves surface quality and tool life The insert’s 15° relief angle and 1.5 mm corner radius balance strength and finish: the relief reduces rubbing at the flank while the robust radius supports higher feed rates without compromising surface integrity. The 24 mm plate dimension and the execution code deliver a standardised fit for compatible toolholders, allowing simple integration into existing cutter bodies. Such geometry choices are particularly effective when a secure cutting edge and uniform workpiece finish are priorities. For machining stainless steels and superalloys, specify the Walter Tools Tiger‑tec Gold WSM35G insert via Metav Werkzeuge — contact our specialists at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored recommendations and ordering assistance. Technical Data Article number: XDMT2405150R-F55-WSM35G-WALTER Item: Fräswendeschneidplatte XDMT2405150R-F55 WSM35G Walter Tools Brand: Walter Tools Series: Tiger‑tec Gold Grade: WSM35G Execution: T ISO designation: XDMT2405150R-F55 WSM35G Core specifications Corner radius: 1.5 mm Relief angle: 15° Plate size: 24 mm Plate thickness: 05 Tolerance class: M Materials & features Coating technology: Tiger‑tec Gold Substrate: coated carbide (WSM35G) Applicable materials: stainless steels (M), superalloys and titanium (S) Chipbreaker: F55 Typical use: heavy machining, roughing and semi‑finishing FAQ Which materials are best machined with this insert? The insert is optimised for stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S); the WSM35G grade and Tiger‑tec Gold technology improve edge stability in these difficult‑to‑machine materials. What are the key geometry values and their benefits? The geometry features a 15° relief angle and a 1.5 mm corner radius, which combine to protect the cutting edge under heavy loads while maintaining a consistent surface finish and allowing elevated feed rates when appropriate. How does the chipbreaker F55 affect performance? The F55 chipbreaker channels and breaks chips efficiently during deep or interrupted cuts, supporting safe chip evacuation and reducing the tendency for built‑up edge when machining tough alloys. Is the insert compatible with existing toolholders? The ISO designation XDMT2405150R‑F55 WSM35G defines the form factor and fit; the 24 mm plate size and execution code facilitate compatibility with matching Walter Tools or industry‑standard cutter bodies that accept this insert geometry. Can this insert be used for finishing operations? While primarily aimed at roughing and semi‑finishing in demanding materials, selecting a smaller corner radius or optimising cutting parameters can extend its use toward finishing tasks, depending on the desired surface quality and component tolerances. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between Metav Werkzeuge and the referenced brands; the offered item is an original, factory‑new product of the listed manufacturer.
XDMT2405150R-F55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold performance and the WSP45G grade for reliable, multi-material milling; benefit from the 15° relief and a robust 1.5 mm corner radius for long tool life and consistent surface quality. Order the XDMT2405150R-F55 WSP45G milling insert directly via Metav Werkzeuge or request application advice from their consultants. XDMT2405150R-F55 WSP45G milling insert — Tiger·tec Gold, 15° relief (Walter Tools) XDMT2405150R-F55 WSP45G is a compact, PVD-coated milling insert designed for demanding face- and slot-milling tasks across a wide range of materials Tiger·tec Gold PVD coating Suitable for Stahl, rostfreier Stahl, superalloys 15° relief for flexible milling strategies 1.5 mm corner radius for edge stability High-performance coating that boosts productivity The Tiger·tec Gold coating combined with the WSP45G grade provides a PVD-coated carbide surface that resists abrasive wear and supports stable cutting edges under variable cutting conditions. This combination reduces thermal loading on the cutting zone and extends effective tool life in high‑temperature operations. The coating’s design promotes reliable chip flow and improved surface finishes, translating into fewer tool changes and more productive machining cycles. Geometry engineered for edge strength and consistent results The insert’s 15° relief and 1.5 mm corner radius deliver a balanced compromise between sharpness and toughness. The relief angle enables versatile engagement strategies—permitting productive axial and radial depths—while the larger corner radius improves edge durability during interrupted cuts and roughing passes. The 24 mm insert dimension and the thickness code ensure mechanical stability in heavy milling, and the F55 chipbreaker supports controlled fragmentation for predictable chip evacuation. Proven suitability across steel, stainless and heat-resistant alloys Selected specifically for P / M / S applications, the grade supports conventional Stahl, stainless steels and heat‑resistant superalloys or titanium alloys. The classification P / M / S indicates adaptation to typical chip formation and thermal behaviour of each group: P for carbon and alloy steels, M for corrosion‑resistant steels, and S for heat‑resistant superalloys. This makes the insert a practical choice where mixed batches or switchovers between material types occur, helping to maintain consistent cycle times and surface integrity. Process security and economic performance on the shop floor With tolerance class M and execution code T, the insert aligns with standardised interchangeability requirements and predictable seating in toolholders. The robust grade and chip control features reduce the incidence of built‑up edge and edge chipping, contributing to longer intervals between indexings and lower tooling costs per component. For operations prioritising repeatability and uptime, the insert’s combination of coating, geometry and chipbreaker supports a measurable improvement in machining efficiency. Contact Metav Werkzeuge for tailored application support and fast supply of Walter Tools XDMT2405150R-F55 WSP45G milling inserts — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: XDMT2405150R-F55-WSP45G-WALTER Article: XDMT2405150R-F55 WSP45G Product type: Milling insert Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Relief angle: 15° Corner radius: 1.5 mm Insert size: 24 mm Thickness code: 05 Special features Grade: WSP45G (PVD-coated carbide) Chipbreaker: F55 Execution/code: T Material groups: P / M / S Tolerance class: M FAQ What materials are best processed with this insert? The WSP45G grade and Tiger·tec Gold series are formulated for P / M / S groups, making the insert suitable for Stahl, stainless steels and heat‑resistant superalloys or titanium. How does the 1.5 mm corner radius affect machining? A 1.5 mm corner radius increases edge strength and reduces the risk of chipping during interrupted cuts, improving the life expectancy of the insert under higher feed and depth settings. Is the chipbreaker suitable for long chips and continuous machining? Yes, the F55 chipbreaker is designed to promote controlled chip fragmentation and evacuation, which supports continuous milling operations and consistent surface quality. What does the tolerance class M mean for toolholders? Tolerance class M indicates standardised dimensional accuracy for reliable seating and repeatable positioning in compatible milling cutters; this supports process security and interchangeability. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and product names are the property of their respective owners. Brand names are used for explanation only; no association with our company is implied. The offered item is original and factory‑new.
XDMT2506159R-F55 WSP45G WSP45G Wendeplatten - Walter Tools
High‑performance PVD coating and a robust carbide grade combine to deliver reliable, long‑lasting milling performance across steel, stainless steel and heat‑resistant alloys; the 15° relief and 1.5 mm corner radius support stable cutting and consistent surface quality. Order the indexable milling insert directly via Metav Werkzeuge or ask our consultants if needed. XDMT2506159R-F55 WSP45G indexable milling insert – Tiger‑tec Gold PVD, 15° relief (Walter Tools) The XDMT2506159R-F55 WSP45G is an indexable milling insert engineered for productive face and peripheral milling in steel, stainless steel and heat‑resistant alloys. Tiger‑tec Gold PVD coating for long tool life Suitable for steel, stainless steel and superalloys 15° relief angle for secure cutting action 1.5 mm corner radius with F55 chipbreaker Durable coating and material match for consistent results The Tiger‑tec Gold series combines a PVD‑coating with a tough carbide substrate to handle the typical heat and strain of milling a wide range of materials. The insert’s WSP45G grade is formulated for good edge stability and wear resistance when machining group P (steel), M (stainless steel) and S (superalloys/titanium) according to ISO classifications. This technical combination reduces unexpected tool failures and supports predictable process windows, which is crucial for repeatable batch production and job‑shop schedules. Secure chip control and stable cutting geometry A dedicated F55 chipbreaker paired with a 15° relief angle delivers controlled chip formation and reduces the risk of built‑up edge, particularly when machining sticky or heat‑sensitive alloys. The 1.5 mm corner radius supports a balance between edge strength and finish quality, giving a durable cutting edge while maintaining acceptable surface integrity. These geometric choices minimise downtime for tool changes and help achieve steady cycle times in serial milling tasks. Practical versatility for production environments With a 25 mm plate size and thickness code 06, the insert fits common milling cutters for both roughing and finishing passes where process security is a priority. The M tolerance class ensures dimensional reliability for clamping and indexability. Overall, the design emphasises efficient material removal and repeatable results, making it suitable for workshops seeking an economical solution that still addresses demanding materials and varied component geometries. Contact Metav Werkzeuge for cutting data, toolholder compatibility and to place an order for the Walter Tools XDMT2506159R-F55 WSP45G; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: XDMT2506159R-F55-WSP45G-WALTER Product name: Fräswendeschneidplatte / indexable milling insert Brand: Walter Tools Core technical data Relief angle: 15° Corner radius: 1.5 mm Plate size: 25 mm Thickness code: 06 Chipbreaker: F55 Grade/series: WSP45G, Tiger‑tec Gold Tolerance class: M Materials & features Coating / grade: Tiger‑tec Gold PVD, coated carbide Applicable material groups: P / M / S (steel, stainless steel, superalloys/titanium) Intended use: milling applications Execution: T FAQ What materials is this insert designed to machine? The insert is specified for group P, M and S materials; the Walter Tools XDMT2506159R‑F55 WSP45G is suitable for steel, stainless steel and heat‑resistant superalloys or titanium. How does the F55 chipbreaker affect machining performance? The F55 chipbreaker promotes short, consistent chips and reduces built‑up edge formation on the XDMT2506159R‑F55 WSP45G, improving surface quality and process stability in interrupted or continuous milling. What advantages does the Tiger‑tec Gold coating provide? Tiger‑tec Gold PVD coating increases wear resistance and edge stability, extending the insert’s life under the thermal loads typical of milling steels and high‑alloy materials. Is the corner radius suitable for finishing passes? The 1.5 mm corner radius on this insert offers a compromise between robustness and finish quality; it is effective for semi‑finishing and many finishing operations where rigidity and edge life are important. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are used for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, factory‑new goods from the manufacturer. Walter Tools is part of the Walter group of products and is mentioned here for clarification of origin.
XDMT2506160R-F55 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WKP35S carbide grade and the F55 chipbreaker to secure consistent chip control and long tool life in steel and cast iron milling operations; order the insert directly via Metav Werkzeuge or ask the consultants for application guidance. XDMT2506160R-F55 WKP35S milling indexable insert by Walter Tools — Tiger·tec Silver, for steel & cast iron XDMT2506160R-F55 WKP35S is a coated milling insert designed for productive machining of steel and cast iron with optimised chip control and wear resistance Tiger·tec Silver coating for long life WKP35S coated carbide grade F55 chipbreaker for reliable chip formation 15° free cutting angle and 1.6 mm corner radius High process reliability through optimised coating and grade The combination of the Tiger·tec Silver coating and the WKP35S carbide grade delivers stable wear behaviour under the thermal and mechanical loads typical of steel and cast iron machining. The coating reduces abrasive wear and thermal softening, which translates into consistent tool life and predictable performance across batch runs. For production planning, this means fewer tool changes and improved uptime. Predictable chip control and surface quality for efficient production Equipped with the F55 chipbreaker and a 15° free cutting angle, the insert promotes short, controlled chips when cutting steels and cast irons. Controlled chip formation improves evacuation and reduces the risk of built-up edge, resulting in better surface finish and reduced rework. The specified 1.6 mm corner radius supports stable cutting at mid to higher depths of cut while maintaining edge robustness. Practical benefits and applicability in machining setups The insert is sized for common milling cutters and is intended for productive roughing and semi-finishing operations on steel (P) and cast iron (K) in accordance with ISO material groupings. As a coated indexable solution, it enables quick replacement and reduces setup downtime; the insert grade and geometry are selected to balance productivity and edge life, making it suitable for shop-floor environments aiming to maximise output while keeping process costs under control. Contact Metav Werkzeuge for application advice on the Tiger·tec Silver WKP35S insert, availability and delivery options; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: XDMT2506160R-F55-WKP35S-WALTER Product name: XDMT2506160R-F55 WKP35S Product type: Milling indexable insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP35S Facts Free cutting angle: 15° Corner radius: 1.6 mm Plate size: 25 Thickness: 06 Tolerance class: M Special features Coating: Tiger·tec Silver Carbide grade: WKP35S (coated carbide) Chipbreaker: F55 Material applicability: Steel (P) and Cast iron (K) Execution: T FAQ What materials is the XDMT2506160R-F55 WKP35S suited for? The insert is designed for machining steel (P) and cast iron (K) in line with ISO material groupings; the WKP35S grade and Tiger·tec Silver coating are tuned for these materials. How does the F55 chipbreaker improve machining? The F55 chipbreaker produces short, controllable chips that aid evacuation and reduce the likelihood of built-up edge, improving surface finish and process stability with this milling insert. What role does the 1.6 mm corner radius play? A 1.6 mm corner radius increases edge strength and supports higher depths of cut while maintaining acceptable surface quality, which is beneficial during roughing and semi-finishing. Is the insert compatible with standard milling cutters? The insert shape and designation are common for indexable milling systems; compatibility depends on the cutter pocket and clamping system—confirm the cutter specification with Metav Werkzeuge for retrofit checks. Which series does this grade belong to and what is its main advantage? This grade is part of the Tiger·tec Silver series; its main advantage is improved wear resistance and thermal stability, which supports longer tool life in steel and cast iron machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for clarification only and do not indicate any affiliation between our company and the named brands. The offered item is original, brand-new manufacturer product.
XDMT2506160R-F55 WSM35G T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WSM35G carbide grade and a 1.6 mm corner radius for stable, productive machining of stainless steels and heat‑resistant superalloys; order directly via Metav Werkzeuge or request application advice from our consultants. Milling indexable insert XDMT2506160R-F55 WSM35G — Walter Tools; Tiger·tec Gold coating, 1.6 mm corner radius (for stainless steels & superalloys) XDMT2506160R-F55 WSM35G is a Walter Tools milling indexable insert designed for demanding roughing and finishing operations in stainless steels and high‑temperature alloys Tiger·tec Gold coated carbide grade WSM35G Optimised for stainless steels and superalloys 15° relief angle for secure cutting performance 1.6 mm corner radius for robust edge stability High‑performance grade for demanding materials The insert is built around the WSM35G carbide grade and the Tiger·tec Gold coating, a combination engineered for machining stainless steels and heat‑resistant superalloys. This coating technology improves thermal stability and wear resistance, which supports consistent chip formation and delays edge breakdown. For operations where materials tend to work‑harden or generate high cutting temperatures, the hardened surface finish of the insert helps maintain dimensional accuracy and reduces the risk of premature tool changeovers. Geometry that promotes uninterrupted production The tool geometry—including a 15° relief angle, the F55 chipbreaker and a 1.6 mm corner radius—is tailored to balance cutting forces and edge life. The chipbreaker controls chip flow for interrupted and continuous cuts, lowering the chance of built‑up edge, while the larger corner radius strengthens the cutting edge for longer service intervals. These features translate into fewer tool swaps and more continuous production time, improving throughput and reducing machining costs per component. Practical benefits in shopfloor settings With a plate size of 25 mm and a standard insert thickness code of 06, the design supports straightforward integration into common milling cutters and bodies. The insert’s specification emphasises process reliability and repeatable results in series production, making it suitable for batch machining or mixed‑lot work where consistent surface quality and tool life are critical. Specification clarity and grade selection reduce set‑up time and simplify tool management in the tooling inventory. Selection advice and application scope The carbide grade and chipbreaker combination are particularly suited to materials classified under ISO group M (stainless steels) and S (heat‑resistant superalloys and titanium) when moderate to heavy cutting conditions are applied. For customers seeking improved component finish and edge stability in those materials, the insert offers a practical route to higher productivity. For further machining parameters or tailored recommendations, technical consultation is available from Metav Werkzeuge to match cutter bodies and machine capability with the insert geometry. Contact Metav Werkzeuge for tailored machining recommendations on Walter Tools Tiger·tec Gold inserts such as the XDMT2506160R-F55 WSM35G and specify application details to receive expert setup and cutting parameter guidance by email or phone Technical Data Article number: XDMT2506160R-F55-WSM35G-WALTER Designation: XDMT2506160R-F55 WSM35G Product type: Milling indexable insert Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 1.6 mm Plate size: 25 mm Thickness code: 06 Chipbreaker: F55 Special features Coating technology: Tiger·tec Gold Carbide grade: WSM35G Material suitability: stainless steels (ISO M) and superalloys/titanium (ISO S) Series: Tiger‑tec Gold FAQ Which materials is this insert suitable for? The XDMT2506160R‑F55 WSM35G insert is designed for stainless steels (ISO M) and heat‑resistant superalloys/titanium (ISO S), where thermal stability and secure chip control are required. What does the WSM35G grade provide in practice? WSM35G, combined with Tiger·tec Gold coating, delivers improved wear resistance and stable cutting edges under elevated temperatures, supporting reliable chip formation and prolonged tool life. How does the 1.6 mm corner radius affect performance? A 1.6 mm corner radius increases edge strength and reduces the risk of edge chipping, which is beneficial for robust cutting conditions and when longer tool life is a priority. Is the insert compatible with standard Walter milling cutters? The insert designation XDMT2506160R‑F55 matches common Walter cutter bodies designed for 25 mm‑class plates; confirm body and seat geometry with the cutter documentation or Metav Werkzeuge for precise fitment. What is the role of the F55 chipbreaker? The F55 chipbreaker controls chip shape and evacuation, helping to avoid tangled chips and improving process stability in a range of cutting conditions for both roughing and finishing. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names are mentioned solely for explanation. There is no connection between our company and the named brands. The offered item is original, brand‑new goods from the manufacturer.
XDMT2506160R-F55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, secure chip control from the F55 chipbreaker and a 15° clearance for consistent productivity and reduced tooling costs; order directly via Metav Werkzeuge or consult the team for application advice. Indexable milling insert XDMT2506160R-F55 WSP45G – Tiger‑tec Gold, 15° clearance (Walter Tools) The XDMT2506160R-F55 WSP45G is an indexable milling insert intended for versatile milling of steel, stainless steel and heat‑resistant superalloys in industrial machining. Tiger‑tec Gold PVD coating 15° clearance angle 1.6 mm corner radius Secure chip control with F55 chipbreaker Robust coating that extends tool life and lowers part cost The Tiger‑tec Gold PVD coating delivers enhanced wear resistance and reliable edge stability, which translates into longer intervals between indexings and fewer tool changes. For production environments this means a measurable reduction in tooling cost per component and fewer interruptions on high‑throughput machines. The coated grade is optimised for mixed operations, helping to maintain cutting performance across varying feed rates and cutting depths. Stable chip formation and reliable machining of demanding alloys Designed for the material groups steel, stainless steel and superalloys/titanium, the insert’s geometry in combination with the F55 chipbreaker promotes consistent chip control and avoids built‑up edge. This stability reduces rework and improves process predictability, especially when machining sticky or heat‑sensitive materials. Operators benefit from fewer surface defects and more repeatable cycle times when the chip flow is controlled. Geometry chosen for surface quality and edge strength The combination of a 15° clearance angle and a 1.6 mm corner radius balances cutting edge strength and surface finish. The modest corner radius supports finishing passes while providing enough robustness for light roughing, delivering reliable dimensional accuracy and improved workpiece appearance. The 25 mm plate dimension and standardised insert profile make it straightforward to integrate into common milling toolholders for flexible workshop use. Practical advantages for production and toolroom applications Belonging to the Tiger‑tec Gold series, this Walter Tools insert is aimed at users who prioritise process security and consistent performance. The coated, tough grade WSP45G supports stable machining across varied jobs, reducing scrap rates and increasing uptime. For further process data or application guidance, technical documentation and cutting parameter recommendations are available on request to assist integration into existing machining cycles. For tailored cutting data and availability of Walter Tools' Tiger‑tec Gold inserts, contact Metav Werkzeuge for application support and delivery information at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: XDMT2506160R-F55-WSP45G-WALTER Designation: XDMT2506160R-F55 WSP45G Grade / Series: WSP45G / Tiger‑tec Gold Manufacturer: Walter Tools Facts Clearance angle: 15° Corner radius: 1.6 mm Plate size: 25 mm Thickness: 06 Tolerance class: M Special features PVD‑coated carbide cutting material Chipbreaker: F55 Material suitability: P / M / S (steel, stainless steel, superalloys / titanium) Execution: T Insert type: indexable milling insert FAQ What materials can this insert machine reliably? The XDMT2506160R‑F55 WSP45G insert is suitable for machining steel, stainless steel and heat‑resistant superalloys/titanium thanks to the WSP45G grade and Tiger‑tec Gold coating. How does the F55 chipbreaker affect machining? The F55 chipbreaker promotes secure chip formation and evacuation, which reduces the risk of built‑up edge and improves surface quality during both finishing and medium‑duty milling. When is the 1.6 mm corner radius recommended? The 1.6 mm corner radius offers a compromise between edge strength and surface finish; it is well suited to light roughing and finishing passes where improved edge robustness is required. Is this insert compatible with standard 25 mm milling cutters? The insert’s 25 mm plate dimension and standardised geometry make it compatible with many common milling holders designed for this insert family; verify seat and clamp compatibility before fitting. What are the main benefits of the Tiger‑tec Gold grade? Tiger‑tec Gold provides enhanced wear resistance and edge stability, helping to extend tool life and increase process reliability under varied cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, brand‑new goods from the manufacturer.
XDMT3207191R-F55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, stable chip control and wide material suitability for uninterrupted milling operations. Benefit from the Tiger‑tec Gold coating and the WSP45G grade for extended tool life — order via Metav Werkzeuge or consult the technical team for application support. XDMT3207191R-F55 WSP45G milling insert — Tiger‑tec Gold, versatile P/M/S application — Walter Tools A XDMT3207191R-F55 WSP45G milling insert designed for productive milling of steel, stainless steel and heat‑resistant alloys in demanding industrial environments. Tiger‑tec Gold PVD‑coated grade WSP45G Designed for steel, stainless steel and superalloys 15° clearance angle for secure chip formation 1.9 corner radius for enhanced edge strength High performance for reliable, cost‑effective milling The combination of the Tiger‑tec Gold PVD coating and a coated carbide substrate offers a deliberate balance between wear resistance and toughness. This results in longer periods between indexings and consistent surface quality on workpieces, which translates into measurable productivity gains on the shop floor. The insert’s engineered coating reduces flank wear and maintains a stable cutting edge under typical milling thermals, so production runs remain predictable and economically efficient. Secure chip control and robust edge geometry for tough materials Equipped with chipbreaker F55 and a clearance of 15°, the insert ensures controlled chip formation even in adhesive or low‑conductivity materials. The 1.9 corner radius increases edge strength and resists chipping during interrupted cuts, making the geometry particularly suitable for finishing and medium‑depth roughing operations. The grade’s versatility for ISO groups P / M / S means consistent performance across unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys, which simplifies tool selection and reduces tool inventory complexity. Seamless workshop integration and industrial usability Tolerance class M and the standard plate dimensions ensure reliable seating and repeatable positioning in commonly used milling holders. The plate format and thickness designation support robust clamping and easy index changes in automated or manual tool systems, improving uptime. The Tiger‑tec Gold series is known for productive chip control and wide material coverage, so adopting this solution can reduce setup variety while maintaining machining flexibility across different production batches. Contact Metav Werkzeuge for application advice and to request a tailored quotation for the Tiger‑tec Gold WSP45G insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: XDMT3207191R-F55-WSP45G-WALTER Article designation: Fräswendeschneidplatte XDMT3207191R-F55 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Milling insert Core technical data Clearance angle: 15° Corner radius: 1.9 Plate size: 32 Plate thickness: 07 Tolerance class: M Features and materials Grade: WSP45G (Tiger‑tec Gold) Chipbreaker: F55 Applicable material groups: P / M / S Series: Tiger‑tec Gold Execution: T Material designation: P / M / S FAQ What materials is this insert suitable for? The insert is suitable for ISO groups P / M / S, meaning it machines unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys with stable performance. What does the WSP45G grade offer? WSP45G is a Walter Tools coated carbide grade from the Tiger‑tec Gold family, optimised for toughness and versatility in milling applications where both wear resistance and edge stability are required. How does the chipbreaker F55 influence machining? Chipbreaker F55 enables controlled chip formation and evacuation, reducing the risk of built‑up edge and supporting consistent surface finish during continuous and interrupted milling. Which geometric features improve edge life? The 1.9 corner radius combined with a 15° clearance angle provides enhanced edge strength and reduces chipping risk, particularly during heavy engagement or interrupted cuts. What are the key dimensional details to check before ordering? Key details include plate size 32, plate thickness 07, and tolerance class M to ensure compatibility with existing holders and tool systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for clarification only. There is no affiliation between our company and the mentioned brands. The offered item is original, factory‑new goods from the manufacturer. The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group.
XDMT3207200R-F55 WKP25S Wendeplatten - Walter Tools
Take advantage of targeted wear resistance and reliable chip control for efficient milling of steel and cast iron; the coated carbide grade and Tiger‑tec Silver technology extend tool life while maintaining process stability. Order the XDMT3207200R-F55 WKP25S milling insert directly via Metav Werkzeuge or ask our consultants if needed. XDMT3207200R-F55 WKP25S milling insert by Walter Tools — coated carbide, Tiger‑tec Silver The XDMT3207200R-F55 WKP25S is a precision milling insert designed for versatile milling of steel and cast iron, combining a specialised chipbreaker and a controlled lead angle for stable, productive machining. Tiger‑tec Silver coating for steel and cast iron ISO XDMT3207200R-F55 designation for milling 15° lead angle with 2 mm corner radius Coated carbide grade WKP25S for long life Boosted productivity with a coating engineered for demanding materials The combination of Tiger‑tec Silver technology and the WKP25S grade offers a clear productivity advantage when machining ferrous materials. The coated carbide construction balances toughness and wear resistance, enabling longer tool life and fewer indexings. For fabricators working across mixed batches, this results in fewer tool changes and higher machine uptime. The insert’s design focuses on consistent chip formation and effective heat management, which together reduce unplanned stops and improve overall process economy. Consistent surface quality and secure chip control for reliable results The chipbreaker F55 and a 15° lead angle support controlled chip flow and predictable cutting behaviour, which improves surface finish and dimensional stability. The 2 mm corner radius contributes to robust edge strength, helping to withstand interrupted cuts and moderate radial engagement. These geometry choices mean the insert is suitable for a wide range of finishing and medium‑depth roughing passes, translating technical geometry into measurable shopfloor benefits: fewer rejects and less rework. Practical integration into production and material coverage explained This insert is tailored for ISO groups P and K, i.e., steel and cast iron, so selection for mixed‑material runs is straightforward. The designation reflects an industry standard geometry (XDMT3207200R-F55) that fits compatible toolholders, easing procurement and setup. Tolerance class M ensures repeatable interchangeability between batches. For teams seeking application support or compatibility checks, documentation and technical advice are available to aid reliable implementation and reduce commissioning time. Contact Metav Werkzeuge for application advice on the Walter Tools XDMT3207200R-F55 WKP25S milling insert and expert assistance with tooling selection Technical data Article number: XDMT3207200R-F55-WKP25S-WALTER Manufacturer: Walter Tools Product type: Milling insert Facts Free/lead angle: 15° Corner radius: 2 mm Plate size: 32 Thickness: 07 Tolerance class: M Chipbreaker: F55 Special features Series: Tiger‑tec Silver Grade: WKP25S (coated carbide) Material application: Steel (P) Material application: Cast iron (K) Execution: T FAQ What materials is this insert suitable for? The XDMT3207200R-F55 WKP25S insert is designed for machining steel (ISO group P) and cast iron (ISO group K), using the Tiger‑tec Silver coated carbide grade for balanced wear resistance and toughness. How does the chipbreaker F55 affect machining? The chipbreaker F55 promotes controlled chip formation and evacuation, improving surface finish and reducing risk of chip re-cutting during milling with the XDMT3207200R-F55 WKP25S insert. Which geometry features support tool life? A 15° lead angle combined with a 2 mm corner radius and the WKP25S coating reduce edge stress and thermal load, extending the effective life of the insert in mixed milling operations. Is this insert compatible with standard holders? The XDMT3207200R-F55 designation follows industry conventions for indexable milling inserts; compatibility depends on holder system, but the ISO‑style coding supports wide interchangeability. Where can additional technical data or application support be obtained? For further technical specifications or cutting parameters related to the XDMT3207200R-F55 WKP25S insert, please contact Metav Werkzeuge for tailored advice. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, brand‑new product of the manufacturer. Walter Tools is referenced as the brand of the supplied insert.
XDMT3207200R-F55 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Walter Tools’ Tiger‑tec Silver technology and the WKP35S grade to achieve consistent productivity when machining Stahl and Gusseisen; the insert’s F55 chipbreaker and 15° relief angle support stable cutting and predictable chip control. Order the insert directly via Metav Werkzeuge or contact the consultants for application support. XDMT3207200R-F55 WKP35S milling insert (Tiger‑tec Silver) by Walter Tools — for Stahl and Gusseisen, 15° relief The XDMT3207200R-F55 WKP35S is a milling indexable insert engineered for industrial milling operations, optimised to handle a wide range of Stahl and Gusseisen applications with reliable edge stability. Tiger‑tec Silver coating for improved tool life Grade WKP35S optimised for Stahl and Gusseisen 15° relief angle enhances cutting stability 2 mm corner radius for robust performance Consistent productivity through advanced grade and coating The combination of the Tiger‑tec Silver series and the WKP35S grade delivers a durable, coated carbide solution that balances wear resistance and toughness for demanding milling. Designed specifically for the ISO material groups P / K, the insert copes with the heat and chip formation typical of Stahl and the abrasive, breaking-chip behaviour of Gusseisen. This technical pairing reduces flank wear and supports longer tool life, which in turn increases uptime and contributes to predictable cycle times on production lines. The result is a measurable improvement in process reliability when replacing worn edges or standard grades. Stable cutting geometry and reliable chip control for improved surface quality The geometry of this insert — including the F55 chipbreaker, 15° relief angle, and corner radius 2 — is tuned to promote controlled chip formation and secure cutting engagement. The chipbreaker assists in breaking and evacuating chips to avoid re-cutting, while the relief angle reduces rubbing and heat at the cutting edge. With a nominal plate size of 32 and thickness code 07, the component provides a balance between rigidity and accessibility in milling pockets. These design choices contribute to improved surface finish and help maintain dimensional stability under continuous operation. Application scope and workshop integration for efficient use This insert is suitable for general and production milling of Stahl and Gusseisen, and it is particularly useful where repeatable edge life and consistent cutting behaviour are required. The tolerance class M ensures interchangeability across standard toolholders that accept the ISO designation XDMT3207200R-F55 WKP35S. For selecting compatible cutters and optimising cutting parameters, refer to machine capability and the cutter manufacturer’s guidance. Further specification sheets and cutting data are available on request from Metav Werkzeuge for integration into existing process windows. Choose Walter Tools’ Tiger‑tec Silver inserts for dependable edge life and consistent chip control — contact Metav Werkzeuge for tailored application advice or to secure supply by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: XDMT3207200R-F55-WKP35S-WALTER Label: Fräswendeschneidplatte XDMT3207200R-F55 WKP35S Walter Tools Manufacturer: Walter Tools / Walter Deutschland GmbH Product type: Fräswendeschneidplatte Series: Tiger‑tec Silver Grade: WKP35S ISO designation: XDMT3207200R-F55 WKP35S Designation (without grade): XDMT3207200R-F55 Chipbreaker: F55 Tolerance class: M Execution: T UID: XDMT3207200R-F55-WKP35S-WALTER Core technical figures Relief angle: 15° Corner radius: 2 Plate size: 32 Thickness code: 07 Special features Material groups: P / K Suitable for: Stahl, Gusseisen Coating/technology: Tiger‑tec Silver Coated carbide grade: WKP35S FAQ What materials is this insert suitable for? The XDMT3207200R-F55 WKP35S insert is designed for machining Stahl (ISO group P) and Gusseisen (ISO group K) using the Tiger‑tec Silver coated carbide WKP35S grade. How does the F55 chipbreaker affect performance? The F55 chipbreaker promotes short, controllable chips and efficient evacuation, which reduces the risk of re-cutting and helps maintain consistent surface quality during milling operations. What benefits does the Tiger‑tec Silver technology provide? Tiger‑tec Silver coating improves wear resistance and thermal stability of the coated carbide substrate, supporting longer edge life and more predictable cutting performance in mixed-production environments. Is the insert interchangeable with standard ISO toolholders? The insert follows the ISO-style designation and tolerance class M, enabling compatibility with toolholders that accept the XDMT3207200R-F55 form; check the cutter’s clamping specifications before installation. Where to obtain cutting data or additional specifications? Technical data sheets and recommended cutting parameters for the XDMT3207200R-F55 WKP35S are available from Metav Werkzeuge or the toolholder supplier to ensure correct integration into the machining process. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Mark names and protected designations are cited solely for explanation. There is no affiliation implied between our company and the named brands. The offered item is original factory‑new merchandise from the manufacturer.
XDMT3207200R-F55 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of a heat‑resistant Tiger‑tec Gold coating, a robust geometry with a 2 mm corner radius and a 15° relief angle for consistent machining of demanding materials; order directly via Metav Werkzeuge or consult their experts for application advice. XDMT3207200R-F55 WSM35G – milling indexable insert, Tiger‑tec Gold coating, for stainless steel and superalloys | Walter Tools The XDMT3207200R-F55 WSM35G is a milling insert engineered for reliable material removal in demanding environments, optimised for stainless steels and heat‑resistant superalloys where secure chip formation and stable cutting edges are critical. Tiger‑tec Gold coated grade WSM35G Suited for stainless steel and superalloys Stable cutting edge with corner radius 2 mm Chipbreaker F55 for improved chip control Heat‑resistant coating that sustains aggressive cuts The coated cemented carbide grade WSM35G, part of the Tiger‑tec Gold family, delivers a balance of heat resistance and wear protection that is particularly valuable when machining stainless steel and superalloys. The multilayer coating reduces chemical adhesion and protects the cutting edge against thermal softening, which lowers the risk of built‑up edge and prolongs effective tool life. For operations where temperatures at the cutting zone are elevated, this coating supports more consistent process behaviour and helps maintain component surface quality under prolonged cyclic loads. Geometry tuned for edge stability and surface quality A controlled relief of 15° relief angle combined with a corner radius 2 mm provides mechanical strength at the cutting edge while helping to moderate cutting forces. The geometry minimises vibration and supports stable chip formation; the F55 chipbreaker is shaped to segment and evacuate chips efficiently, reducing re‑cutting and improving surface finish. The insert dimensions (size 32, thickness 07) and tolerance class M are selected to match common milling tool bodies and ensure reproducible seating and runout behaviour, which contributes directly to predictable machining results and repeatability across production batches. Process advantages and recommended applications Thanks to the combination of grade and geometry, the insert enables stable machining of demanding workpieces, particularly those prone to toughness, work hardening or poor heat conduction. The result is improved process security, longer edge life and consistent component quality — important factors in production environments where downtime and rework are costly. This insert is best applied in medium to heavy milling operations on stainless steel and heat‑resistant alloys, where its chip control and edge strength translate into higher productivity and reduced tool change frequency. For tailored machining recommendations or to order Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge for application support and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Product data Article number: XDMT3207200R-F55-WSM35G-WALTER Manufacturer: Walter Tools Product type: milling indexable insert Series: Tiger‑tec Gold Numbers / Core technical data Relief angle: 15° Corner radius: 2 mm Plate size: 32 Plate thickness: 07 Tolerance class: M Special features Grade: WSM35G (coated cemented carbide) Chipbreaker: F55 Applicable materials: stainless steel (M), superalloys/titanium (S) Execution: T ISO designation: XDMT3207200R-F55 WSM35G FAQ What materials is this insert recommended for? The XDMT3207200R‑F55 WSM35G insert is recommended for stainless steel and heat‑resistant superalloys (ISO groups M and S), where thermal loads and work hardening demand a heat‑resistant grade. What benefits does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WSM35G grade offers improved thermal resistance and wear protection, which helps maintain a stable cutting edge and reduces built‑up edge during extended machining of tough materials. How does the chipbreaker F55 affect milling performance? The F55 chipbreaker promotes reliable chip segmentation and evacuation, lowering the risk of re‑cutting and enhancing surface finish when milling ductile or gummy alloys. Which geometry features contribute to insert durability? The combination of a 15° relief angle and a corner radius 2 mm increases edge strength and lowers sensitivity to vibration, resulting in more consistent tool life in demanding milling operations. Is this insert suitable for heavy‑duty milling applications? Yes, the WSM35G grade and the insert geometry are intended for medium to heavy milling of hard‑to‑machine materials, delivering process security and repeatable results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for identification purposes only and indicate no affiliation with or endorsement by the trademark holder. The offered item is original, new production from the manufacturer.
XDMT3207200R-F55 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a versatile WSP45G grade and robust geometry to ensure stable chip formation and extended tool life in demanding milling operations; order directly via Metav Werkzeuge or consult the team for application advice. XDMT3207200R-F55 WSP45G — Indexable milling insert with Tiger·tec Gold coating and 15° relief angle (Walter Tools) The XDMT3207200R-F55 WSP45G is an indexable milling insert engineered for versatile face and shoulder milling where consistent chip control and edge stability are required Tiger·tec Gold PVD coating for long tool life Suitable for steel, stainless steel and superalloys 15° relief angle for secure chip formation 2 mm corner radius for robust cutting edges Delivering reliable performance across common difficult-to-machine groups The insert’s WSP45G grade, part of the Tiger·tec Gold family, is formulated to combine toughness with wear resistance, making it suitable for the ISO groups P, M and S. That means reliable performance when machining unalloyed and alloyed steel, stainless steel and heat-resistant superalloys/titanium. The balanced material properties of this coated carbide help to avoid premature edge breakdown under the elevated temperatures and adhesive wear typical of these materials, so the process becomes more predictable and productive. Coating and grade benefits that extend tool life and process security The PVD coating technology used in this series enhances the substrate’s surface hardness while maintaining a resilient core. As a result, the coated grade gives improved resistance to abrasive wear and thermal softening during milling. For manufacturers seeking higher uptime, the Tiger·tec Gold treatment supports longer intervals between index changes and contributes to more consistent surface finishes. This translates directly into reduced tool consumption and fewer unscheduled interruptions on the shop floor. Geometry engineered for stable cutting and effective chip control The insert’s geometry—a 15° relief angle, 2 mm corner radius and the F55 chipbreaker—is designed to promote controlled chip formation and effective evacuation in interrupted and continuous cuts. The modest relief angle aids in preventing edge build-up on stainless grades, while the larger radius strengthens the cutting corner against impact and edge chipping. The F55 chipbreaker manages chip flow in a wide range of feeds and depths of cut, helping to reduce recutting and protect the machined surface. Practical advantages for production and setup Using this indexable insert supports streamlined operations: the standardised designation simplifies inventory, and the insert’s robust coating and geometry reduce the frequency of tool changes. For process engineers, the combination of a resilient grade and an effective chipbreaker means fewer trial passes to find a stable cutting window. In practice, this can shorten setup time, increase effective spindle time and contribute to predictable component quality across batches. Contact Metav Werkzeuge today for tailored machining recommendations for Walter Tools Tiger·tec Gold inserts or request application-specific data at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data Article number: XDMT3207200R-F55-WSP45G-WALTER Label: Fräswendeschneidplatte XDMT3207200R-F55 WSP45G Walter Tools Manufacturer: Walter Tools Data Relief (free) angle: 15° Corner radius: 2 mm Insert size: 32 Thickness designation: 07 Tolerance class: M Special features Grade: WSP45G Coating / series: Tiger·tec Gold Chipbreaker: F55 Substrate / designation: coated cemented carbide Execution: T Applicable material groups: P / M / S FAQ What materials can be machined with this insert? The XDMT3207200R-F55 WSP45G insert is suitable for steel, stainless steel and heat-resistant superalloys/titanium, corresponding to ISO groups P, M and S. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating increases surface hardness and thermal resistance, which helps the insert to maintain a stable cutting edge and longer tool life under milling conditions. What is the benefit of the 15° relief angle and 2 mm corner radius? A 15° relief angle reduces edge adhesion on ductile materials while the 2 mm corner radius strengthens the cutting edge, improving resistance to chipping and providing smoother transitions on finished surfaces. Which chipbreaker is fitted and what is its effect? This insert features the F55 chipbreaker, designed to promote consistent chip control across a range of feeds and depths of cut, reducing the risk of recutting and improving surface integrity. Is this insert suited for interrupted cuts or roughing applications? Yes—the combination of a tough WSP45G grade and the 2 mm corner radius provides robustness suited to interrupted cutting and general milling operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, brand-new merchandise of the manufacturer Walter Tools. The Walter brand is referenced where relevant to explain product origin and capabilities.
XDMT4009250R-F55 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WKP25S grade and precise geometry to increase process reliability and tool life; order directly via Metav Werkzeuge or contact the consultants for cutting data and application advice. XDMT4009250R-F55 WKP25S milling insert by Walter Tools — Tiger·tec Silver coating, F55 chipbreaker The XDMT4009250R-F55 WKP25S is a milling insert designed for productive roughing and finishing of Stahl and Gusseisen, offering a balance of wear resistance and chip control. Tiger·tec Silver coated carbide WKP25S grade for Stahl and Gusseisen F55 chipbreaker for controlled chips 15° clearance angle for stable cutting Increased productivity through coating and grade The combination of the Tiger·tec Silver coating with the WKP25S carbide grade provides pronounced resistance to abrasive wear and maintains a stable cutting edge under varying loads. This results in more consistent machining and fewer interruptions for index changes, which translates into measurable productivity gains on both short and long runs. The geometry is optimised for common workshop tasks on Stahl and Gusseisen, so the insert supports higher material removal rates without compromising component quality. The measurable advantages are longer tool life and improved process stability, reducing time spent on rework. Reliable chip control and surface quality The dedicated F55 chipbreaker promotes predictable chip formation across a range of cutting conditions, helping to avoid long, entangling swarf and to support safe chip evacuation. Controlled chips reduce the risk of surface damage and make downstream cleaning easier, leading to a better surface finish with less manual intervention. The 2.5 mm corner radius contributes to edge robustness and a smoother transition at the cut, while the 15° clearance angle aids in maintaining an even cutting force, both of which support repeatable results in production environments. Practical integration and application guidance With a nominal plate size of 40 mm and a thickness code of 09, the insert fits a wide range of milling cutters that accept this ISO-style designation and mounting. The insert is intended for standard clamping systems and is suitable for both roughing and semi-finishing passes when matched with appropriate cutting parameters for Stahl and Gusseisen. Application of the grade should follow typical carbide practice: select coolant and speeds based on workpiece hardness and rigidity, and favour conservative feeds when first introducing the geometry into a new job. For precise cutting data or process recommendations for the Walter Tools insert (SKU XDMT4009250R-F55-WKP25S-WALTER), Metav Werkzeuge can supply tailored values and documentation. Contact Metav Werkzeuge for tailored cutting data and procurement support for Walter Tools Tiger·tec Silver inserts; technical consultants are available to advise on machining parameters and compatibility Technical data Article number: XDMT4009250R-F55-WKP25S-WALTER Designation: XDMT4009250R-F55 WKP25S Series: Tiger-tec Silver Grade: WKP25S Manufacturer: Walter Tools Product type: Milling insert (Fräswendeschneidplatte) Numbers / Core technical data Clearance angle: 15° Corner radius: 2.5 mm Plate size: 40 mm Thickness: 09 Special features / Versions Chipbreaker: F55 Coating: Tiger·tec Silver Material applicability: Stahl, Gusseisen Tolerance class: M Execution: T FAQ What materials is this insert suitable for? The milling insert XDMT4009250R-F55 WKP25S (Walter Tools) is engineered for machining Stahl and Gusseisen, matching the intended ISO material groups P and K. What is the purpose of the F55 chipbreaker? The F55 chipbreaker on the XDMT4009250R-F55 WKP25S creates shorter, more controllable chips to improve evacuation and surface quality during milling operations. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the Walter Tools insert enhances wear resistance and cutting-edge stability, extending tool life and supporting consistent process performance. What does the 2.5 mm corner radius affect in cutting? A 2.5 mm corner radius increases edge strength and contributes to a smoother cutting action, which helps when switching between roughing and semi-finishing passes with the insert. Is this insert compatible with standard ISO-style cutters? Yes, the geometry and designation (XDMT4009250R-F55 WKP25S) correspond to standard ISO-style milling holders; matching the insert to a cutter with compatible clamping is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XDMT4009250R-F55 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger·tec Silver coating and the WKP35S grade for reliable machining of steel and cast iron; the robust 2.5 mm corner radius and dedicated F55 chipbreaker support consistent chip control and longer tool life. Order directly via Metav Werkzeuge or consult our specialists for application support. XDMT4009250R-F55 WKP35S – Indexable milling insert (for steel and cast iron) by Walter Tools The XDMT4009250R-F55 WKP35S indexable milling insert is engineered for productive roughing and semi-finishing of steel and cast iron, combining a Tiger·tec Silver coating with a tailored geometry for stable machining. Tiger·tec Silver coating technology Grade WKP35S, coated carbide For steel and cast iron machining 2.5 mm corner radius for robust edge Increase throughput with consistent cutting performance The combination of a coated carbide grade and the Tiger·tec Silver technology delivers a measurable increase in process reliability for demanding milling tasks. The insert’s chipbreaker F55 is optimised to manage the typical chips produced when machining steel and cast iron, reducing interruptions from chip entanglement and improving machine utilisation. By favouring stable chip formation and predictable wear behaviour, this geometry supports higher uninterrupted cutting times and a more efficient production flow. The result is a practical uplift in productivity while maintaining surface quality. Prolonged edge life through optimised coating and geometry Constructed from a wear-resistant WKP35S substrate and finished with a Tiger·tec Silver coating, the insert provides improved resistance to abrasive and adhesive wear mechanisms common in ferrous materials. The substantial 2.5 mm corner radius increases edge strength, delaying corner chipping in interrupted cuts and roughing operations. A 15° clearance angle supports secure cutting engagement while reducing rubbing and heat build-up at the flank, thereby helping to extend the component life of the insert and reduce tool change frequency. Precision results across typical shop-floor applications With a standard ISO designation and a tolerance class M, the insert offers reproducible geometry suitable for fixture-based production and versatile milling setups. The nominal plate size value (40) and thickness code (09) define a stable contact surface in the tool holder, which helps maintain consistent runout and repeatability across series production. For shops working to ISO material groupings, the marked suitability for P (steel) and K (cast iron) clarifies application scope and supports tool selection decisions without guesswork. Practical handling and application notes for machining planners The indexable design supports rapid replacement and minimises downtime compared with regrindable solutions, making it suitable for batch-oriented environments and general workshop use. The WKP35S grade is intended for the thermal and mechanical conditions of steel and cast iron cutting; when used with appropriate holder clamping and process parameters the insert delivers steady performance. For mixed production that includes both unalloyed steels and abrasive cast materials, the combination of chip control and coating technology reduces risk of premature wear and enhances overall process security. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver inserts and to discuss the best insert geometry for specific milling tasks. Technical data SKU: XDMT4009250R-F55-WKP35S-WALTER Label: Fräswendeschneidplatte XDMT4009250R-F55 WKP35S Walter Tools Manufacturer: Walter Tools Product type: Indexable milling insert Series: Tiger-tec Silver Grade: WKP35S Chipbreaker: F55 Execution: T Facts Size: 40 Thickness: 09 Corner radius: 2.5 Clearance angle: 15° Tolerance class: M Special features Material suitability: P / K Coating technology: Tiger·tec Silver Sorten- und Serienbeschreibung: coated carbide Bezeichnung without grade: XDMT4009250R-F55 FAQ What materials is this insert suitable for? The insert is specified for machining steel (P) and cast iron (K); the WKP35S grade and Tiger·tec Silver coating are designed to cope with the thermal and abrasive conditions of these materials. What does the F55 chipbreaker provide? The F55 chipbreaker offers controlled chip formation for roughing and semi-finishing, improving evacuation and reducing the risk of chip-related interruptions during milling. How does the 2.5 mm corner radius affect performance? A 2.5 mm corner radius increases edge robustness for interrupted cuts and heavy engagement, helping to prolong edge life and reduce the frequency of insert replacements. What is the significance of the 15° clearance angle? The 15° clearance angle reduces flank contact and rubbing while maintaining a secure cutting edge engagement, which helps lower heat generation and wear on the flank face. Is this insert available across a complete tooling system? The insert form and ISO designation align with common indexable milling systems; selection of the correct holder and clamping system will ensure optimal performance with the XDMT4009250R-F55 WKP35S insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are used for explanation only. There is no affiliation between our company and the brands named. The offered item is an original, factory-new product of the manufacturer.
XDMT4009250R-F55 WSP45G WSP45G Wendeplatten - Walter Tools
The combination of robust wear resistance and reliable chip control ensures consistent milling results and reduced tool change frequency; benefit from the Tiger‑tec Gold coating and the WSP45G grade for demanding applications and order directly via Metav Werkzeuge or consult their specialists for machining parameters. XDMT4009250R-F55 WSP45G milling indexable insert for steel, stainless steel and heat‑resistant alloys — Walter Tools The XDMT4009250R-F55 WSP45G is a PVD‑coated Tiger‑tec Gold milling insert engineered for stable chip formation and reliable performance in a range of industrial milling tasks. Tiger‑tec Gold coating for long life WSP45G grade for versatile milling 15° free angle for secure engagement 2.5 mm corner radius for edge strength Consistent productivity through optimised wear resistance The coated Tiger‑tec Gold grade prioritises a balance between wear resistance and toughness, delivering longer intervals between index changes and fewer unplanned stoppages. With a PVD‑coated substrate and the WSP45G composition, the insert promotes stable cutting in interrupted and continuous milling, which contributes to steady cycle times and predictable maintenance planning. This capability translates into measurable improvements in productivity without compromising surface quality. Reliable chip control across steels and alloys Designed for machining groups P, M and S, the insert supports efficient material removal in unalloyed and alloyed steel, austenitic stainless steel and heat‑resistant superalloys. The F55 chipbreaker geometry promotes predictable chip segmentation, reducing the risk of rework and toolholder interference. For operators unfamiliar with material classes: P denotes steels, M denotes stainless steels and S denotes high‑temperature alloys and titanium — the insert’s geometry and grade are tuned to these demands to ensure secure chip evacuation and consistent cutting forces. Edge stability and surface quality from geometry and coating The combination of a 15° free angle and a 2.5 mm corner radius provides a robust cutting edge that resists cratering and chipping under elevated thermal and mechanical loads. The PVD Tiger‑tec Gold coating adds a thermal barrier and improves adhesion resistance at the cutting edge, yielding improved surface finishes and extended edge life. These attributes allow more confident entry into semi‑roughing and finishing cuts with a single insert type, reducing tooling inventory complexity. Seamless integration and practical handling on the shop floor Tolerance class M and execution T ensure consistent fit on common clamping systems and repeatable positioning in multi‑station toolholders. The insert’s 40 designation relates to its perimeter size and should be matched with compatible cutters for secure seating. The unit is straightforward to index and replace, simplifying shop routines and supporting predictable tool management. For tailored cutting data and optimisation in specific setups, consult technical advisors to align speeds and feeds with machine capability and workpiece considerations. Contact Metav Werkzeuge for tailored machining recommendations for the Walter Tools Tiger‑tec Gold WSP45G insert and ensure consistent, productive milling results. Technical data SKU: XDMT4009250R-F55-WSP45G-WALTER Article name: Fräswendeschneidplatte XDMT4009250R-F55 WSP45G Walter Tools Series: Tiger‑tec Gold Grade: WSP45G Manufacturer: Walter Tools Facts Free angle: 15° Corner radius: 2.5 mm Plate size: 40 Chipbreaker: F55 Plate thickness: 09 Tolerance class: M Special features Coating: Tiger‑tec Gold (PVD) Material suitability: P / M / S Execution: T Product type: milling indexable insert Brand advantages: Walter Tools engineering for stable edge life FAQ What materials is this insert suitable for? The XDMT4009250R-F55 WSP45G insert is suitable for steel (P), stainless steel (M) and heat‑resistant alloys/titanium (S) thanks to the WSP45G grade and F55 chipbreaker configuration. How does the Tiger‑tec Gold coating benefit milling performance? The Tiger‑tec Gold PVD coating on this insert improves thermal resistance and reduces flank wear, which supports longer tool life and stable surface quality in demanding milling operations. What does the 2.5 mm corner radius mean for machining? A 2.5 mm corner radius increases edge strength, making the insert better suited to heavier engagement and interrupted cuts while also contributing to improved surface finish compared with smaller radii. Is this insert compatible with common cutter systems? Tolerance class M and execution T indicate standardised fit and repeatable positioning; compatibility depends on the cutter body dimension matching the XDMT40 series insert geometry. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is an original, brand‑new product from the manufacturer.
XDMT4009254R-F55 WSP45G WSP45G Wendeplatten - Walter Tools
High‑performance milling insert featuring Tiger‑tec Gold coating and a robust 2.5 mm corner radius for reliable milling of steel, stainless steel and high‑temperature alloys; combined with the F55 chipbreaker and 15° free angle this insert delivers consistent chip control and edge stability. Order directly via Metav Werkzeuge or consult our technical advisors for application support. Milling insert XDMT4009254R‑F55 WSP45G – Tiger‑tec Gold, 15° free angle (Walter Tools) A XDMT4009254R‑F55 WSP45G milling insert designed for productive face and shoulder milling across a broad range of materials, offering stable cutting performance in mixed production runs Tiger‑tec Gold PVD coated Suitable for steel, stainless steel and superalloys 15° free angle for secure cutting 2.5 mm corner radius for enhanced edge strength Boosted cutting performance for mixed production The PVD Tiger‑tec Gold technology and the WSP45G grade form the technical base for highly consistent milling results. The coated carbide composition is optimised for the thermal and mechanical loads encountered when machining steel, stainless steel and heat‑resistant superalloys, enabling fewer tool changes and a smoother production flow. The combination of coating and substrate reduces flank wear and supports longer effective tool life, which translates into measurable process efficiency and lower downtime. Stable edge life and process security A 2.5 mm corner radius increases the insert’s resistance to chipping and supports stable cutting forces during interrupted and continuous milling. Coupled with the 15° free angle, this geometry helps maintain a robust cutting edge under varying depths of cut and feed rates. The result is predictable tool behaviour and improved surface integrity on critical components, which supports higher first‑pass yields and fewer rework cycles in the machining process. Controlled chip formation for consistent productivity The F55 chipbreaker is engineered to produce manageable chips across the supported material groups, aiding chip evacuation and protecting the workpiece from thermal build‑up. Where thermal conductivity is low—such as with superalloys and titanium—the chip control provided by the chipbreaker reduces the risk of built‑up edge and improves dimensional repeatability. This characteristic is particularly valuable in serial production where consistent part quality and cycle time stability are key metrics. Application guidance and production benefits The insert’s form and grade suit versatile milling tasks, from shoulder milling to light face milling, on mixed batches where operators require a single, reliable grade. The WSP45G grade is a tough, PVD‑coated carbide ideal for settings with variable heat input and intermittent cuts. Integrating this insert can reduce tool inventory complexity while maintaining machining quality across different alloys, supporting faster setup changes and more efficient tool management in the shop. Speak with Metav Werkzeuge for tailored recommendations on feeds, speeds and the most effective clamping solutions for this Walter Tools milling insert Technical data SKU: XDMT4009254R‑F55‑WSP45G‑WALTER Article designation: XDMT4009254R‑F55 WSP45G Product type: Milling insert Manufacturer: Walter Tools Core specifications Free angle: 15° Corner radius: 2.5 mm Plate size: 40 Plate thickness: 09 Tolerance class: M Design & special features Series: Tiger‑tec Gold Grade: WSP45G (PVD‑coated carbide) Chipbreaker: F55 Execution: T Material suitability: P / M / S (steel, stainless steel, superalloys / titanium) Bezeichnung ohne sort: XDMT4009254R‑F55 FAQ What materials is this insert suitable for? The XDMT4009254R‑F55 WSP45G insert from Walter Tools is suitable for machining steel, stainless steel and heat‑resistant superalloys/titanium as indicated by the P / M / S material classification. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold coating on the WSP45G grade enhances wear resistance and thermal stability, enabling the Walter Tools insert to maintain cutting edge integrity over longer cycles and under elevated temperatures. Which machining operations best suit this insert? This insert is optimised for face and shoulder milling operations where robust edge strength and consistent chip control are required, particularly in mixed‑material production environments. How does the F55 chipbreaker affect chip evacuation? The F55 chipbreaker produces controlled chip shapes that aid evacuation and reduce the incidence of built‑up edge, promoting stable cutting and improved surface finish with the Walter Tools insert. What benefits does the 2.5 mm corner radius provide? A 2.5 mm corner radius increases resistance to chipping and supports stable cutting forces, improving edge life and enabling higher reliability in interrupted milling conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and brand names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
XNGU0705ANN-F57 WKP25S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, the WKP25S grade and the F57 chip former for sustained tool life and reliable chip control; order the insert directly via Metav Werkzeuge or contact our advisers for application guidance. XNGU0705ANN-F57 WKP25S milling insert — Tiger·tec Silver, F57 chip former — Walter Tools XNGU0705ANN-F57 WKP25S is a milling insert designed for productive machining of steel and cast iron with a coated carbide grade optimised for wear resistance and stable cutting Tiger·tec Silver coating for consistent wear resistance WKP25S grade for reliable edge stability Optimised F57 chip former for controlled chips Suitable for steel and cast iron machining Higher productivity through coated-carbide technology The combination of Tiger·tec Silver coating and the WKP25S carbide grade delivers a measurable improvement in tool life and process consistency. The coated cemented carbide substrate offers enhanced resistance to abrasive and adhesive wear, which reduces flank wear progression and extends the interval between indexings. For production environments this translates into fewer tool changes, steadier cycle times and improved overall equipment effectiveness. The F57 chip former supports reliable chip segmentation across typical steel and cast-iron applications (ISO P/K), aiding coolant access and reducing the risk of recutting. Confident machining of steel and cast iron with controlled cutting forces Engineered for ISO groups P and K, the insert geometry and negative 0° relief angle provide stable cutting forces and secure seating in milling cutters. The neutral/negative relief helps maintain a robust cutting edge under interrupted cuts and higher feed rates, which is particularly useful in heavy or semi-finish operations. The optimised chip control from the F57 geometry reduces long, stringy chips and assists in safe chip evacuation, improving surface integrity and lowering the likelihood of workpiece damage. The result is predictable machining behaviour across a wide range of steels and cast-iron grades. Reliable integration and interchangeability in machining systems The insert follows common indexable insert standards and tolerance class G, with dimensions indicated by size 07 and thickness 05 for straightforward replacement in compatible cutter bodies. The ISO-style designation and the clear manufacturer SKU streamline procurement and tool management. Walter Tools’ series positioning under Tiger·tec Silver ensures consistency between insert batches, supporting repeatable performance in production. Component compatibility and clear identification simplify inventory control and enable rapid requalification of cutting tools on the shop floor. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools Tiger·tec Silver inserts or to request expert machining advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: XNGU0705ANN-F57-WKP25S-WALTER Article designation: XNGU0705ANN-F57 WKP25S Product type: milling insert Manufacturer: Walter Tools Facts Size: 07 Thickness: 05 Relief/free angle: 0° (negative) Chipformer: F57 Tolerance class: G Special features Series: Tiger·tec Silver Grade: WKP25S (coated cemented carbide) Material application: steel (P) and cast iron (K) Execution: U (geometry variant) FAQ What materials is this insert suitable for? The XNGU0705ANN-F57 WKP25S insert is specified for ISO groups P and K, making it suitable for machining a broad range of steels and cast iron grades. How does the Tiger·tec Silver coating benefit production? Tiger·tec Silver coating on the WKP25S grade improves wear resistance and thermal stability, which in turn extends index life and supports consistent machining results with the XNGU0705ANN-F57. What role does the F57 chip former play? The F57 chip former on this insert controls chip shape and evacuation, reducing the risk of long chips and enhancing surface finish during milling of steel and cast iron. Is the insert compatible with standard cutter bodies? The XNGU0705ANN-F57 designation and tolerance class G ensure compatibility with cutters that accept ISO-style indexable inserts in size 07 and thickness 05. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XNGU0705ANN-F57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WKP35G grade for high process security and stable tool life; the insert's chipbreaker and negative rake support consistent chip control and robust cutting, keeping production running smoothly. For ordering or application advice contact Metav Werkzeuge or request help from our consultants. XNGU0705ANN-F57 WKP35G indexable milling insert — Tiger·tec Gold, 0° negative rake (Walter Tools) The XNGU0705ANN-F57 WKP35G is a coated carbide milling insert engineered for productive machining in steel and cast iron applications. Tiger·tec Gold coating for high process security Grade WKP35G for stable edge life 0° negative rake for robust cutting action Chipbreaker F57 for consistent chip control Increased productivity through advanced coating and grade The Tiger·tec Gold technology and the WKP35G grade combine to deliver reliable cutting performance under varying production conditions. As a coated carbide solution, the insert reduces adhesive wear and extends cutting edge life, which translates into fewer tool changes and less downtime. The coating's thermal and tribological properties improve resistance to abrasion and built-up edge, supporting higher cutting stability when machining steel and cast iron. This results in measurable productivity gains and a lower cost per part in many milling routines. Consistent chip formation and process security The integrated chipbreaker F57 and the 0° negative rake geometry create predictable chip behaviour and robust cutting forces. For components prone to short, breaking chips—common with K materials such as cast iron—this configuration helps evacuate chips cleanly and avoids recutting. In P-group applications (various steel grades) the same design stabilises the cutting edge under thermal load. Together, these features support reproducible surface finish and dimensional constancy across production batches. Precision dimensions for reliable toolholder integration A compact size 07 and thickness 05 profile with tolerance class G enable secure seating and repeatable indexing in standard cutter bodies. The execution marked as U complements common pocket geometries and promotes repeatable clamping behaviour, which is essential for process reliability and reduced set-up times. The insert’s specification simplifies tool inventory management and allows straightforward replacement without complex regrinding or requalification. Contact Metav Werkzeuge for application-specific recommendations and availability of Walter Tools Tiger·tec Gold inserts, including the XNGU0705ANN-F57 WKP35G, to optimise machining performance Technical data Article number: XNGU0705ANN-F57-WKP35G-WALTER Designation: XNGU0705ANN-F57 WKP35G Product type: Milling indexable insert Manufacturer: Walter Tools Core data Size: 07 Thickness: 05 Free rake angle: 0° (negative) Tolerance class: G Special features Series: Tiger·tec Gold Grade: WKP35G Chipbreaker: F57 Material suitability: P (steel), K (cast iron) Execution: U FAQ What materials is this insert suitable for? The XNGU0705ANN-F57 WKP35G insert is designed for machining steel (P group) and cast iron (K group) according to its grade and coating characteristics. What advantage does the Tiger·tec Gold series provide? Tiger·tec Gold offers enhanced wear resistance and thermal stability on the WKP35G grade, improving edge life and process security when the insert is used in demanding milling operations. How does the 0° negative rake affect machining? A 0° negative rake delivers robust cutting action and protects the cutting edge under heavy loads; in the XNGU0705ANN-F57 WKP35G this supports stable performance and consistent chip control. Can this insert be used in standard cutter bodies with pocket type U? Yes, the execution U indicates compatibility with common pocket geometries; the size 07 and tolerance class G support repeatable seating and reliable clamping. What role does the F57 chipbreaker play? The F57 chipbreaker aids in forming controllable chips across a range of feeds and materials, reducing the risk of recutting and improving surface quality when the insert is used in Walter Tools cutter systems. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the trademark owners. The offered article is an original, factory-new product of the manufacturer.
XNGU0705ANN-F57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, the F57 chipbreaker and a 0° negative rake for stable machining of stainless steels and heat‑resistant superalloys; order via Metav Werkzeuge or consult our team for cutting data and availability. XNGU0705ANN-F57 WSM35G — Milling indexable insert, Tiger·tec Gold coating for stainless steels and superalloys (Walter Tools) The XNGU0705ANN-F57 WSM35G is a milling indexable insert optimised for secure chip control and consistent edge life when machining stainless steels and high‑temperature alloys. Tiger·tec Gold coating for enhanced wear resistance Optimised F57 chipbreaker for secure chip control Negative 0° rake for robust cutting edge For stainless and heat‑resistant superalloys Increased process reliability through coating and grade The combination of the Tiger·tec Gold coating and the WSM35G coated carbide grade boosts process reliability in demanding operations. The multilayer coating reduces adhesion and wear on the cutting edge, which means longer tool life and fewer interruptions for insert changes. For manufacturers running lights-out shifts or tight batch schedules, this results in measurable productivity gains: more parts per tool and fewer unplanned stoppages. The specification forms a solid basis for predictable cycle times and consistent surface quality when working with high‑temperature alloys. Secure chip control and stable cutting with F57 geometry The integrated F57 chipbreaker is developed to manage chips from ductile, work‑hardening materials such as stainless steels. The geometry promotes short, controllable chips and reduces re-cutting, lowering the risk of built‑up edge and tool damage. Coupled with the 0° negative rake, the insert provides a sturdy cutting interface that tolerates interrupted cuts and variable feed conditions. For workshops seeking reliable chip evacuation and reduced cycle disruptions, this insert offers a tangible improvement in operational stability. Application focus: heavy, thermally stressed materials Designed with the material groups S and M in mind, the insert is tailored for superalloys and stainless steels, which generate high temperatures and tend to adhere to tools. The WSM35G grade supports a secure cutting edge under thermal and mechanical loads, enabling productive machining strategies where conventional grades would wear prematurely. Where the machining task requires a balance of edge stability and wear resistance, the insert permits conservative cutting data adjustments to favour longer service life without compromising part accuracy. Contact Metav Werkzeuge for tailored cutting parameters, delivery options and technical guidance on the Walter Tools Tiger·tec Gold XNGU0705ANN-F57 WSM35G insert — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: XNGU0705ANN-F57-WSM35G-WALTER Product name: XNGU0705ANN-F57 WSM35G Manufacturer: Walter Tools Product type: Milling indexable insert Series: Tiger·tec Gold Facts Plate size: 07 Plate thickness: 05 Chipbreaker: F57 Free rake angle: 0° (negative) Grade: WSM35G Tolerance class: G Material group: S / M Special features Coating technology: Tiger·tec Gold Coated carbide grade: WSM35G Optimised for stainless steels (M) and superalloys (S) Robust negative geometry for interrupted cuts Designed for secure chip control and extended edge life FAQ What materials is this insert suitable for? The XNGU0705ANN‑F57 WSM35G insert is intended for stainless steels (ISO group M) and heat‑resistant superalloys (ISO group S), as indicated by its grade and geometry. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating reduces adhesion and abrasive wear on the cutting edge, which improves tool life and maintains surface finish under thermally demanding conditions. What is the purpose of the F57 chipbreaker? The F57 chipbreaker is shaped to produce short, controllable chips when machining ductile or work‑hardening materials, improving chip evacuation and reducing the risk of built‑up edge. Can the insert be used for interrupted cuts? Yes, the negative 0° rake and sturdy geometry make the insert suitable for interrupted cutting conditions where edge robustness is required. Is this insert suitable for finishing operations? Depending on machine stability and chosen cutting data, the WSM35G grade can be used for finishing where a reliable edge and good surface quality are priorities. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is original, factory‑new merchandise from the manufacturer.
XNGU0705ANN-F57 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of a Tiger·tec Gold coating and a robust F57 chipbreaker for steady material removal and extended process reliability; order this insert directly via Metav Werkzeuge or request advice from our technical consultants. XNGU0705ANN-F57 WSP45G milling indexable insert — for Steel, stainless steels and superalloys — Walter Tools XNGU0705ANN-F57 WSP45G is a coated carbide milling insert designed for versatile milling tasks, offering wear-resistant performance and reliable chip control in demanding industrial applications. Tiger·tec Gold coated carbide Versatile for Steel, stainless steels, superalloys Stable cutting edge for productive milling 0° (negative) rake for robust operation Durable coating for consistent production gains The Tiger·tec Gold coating provides a high-performance surface that resists abrasive and adhesive wear, ensuring longer tool life under continuous milling. As a coated carbide grade, the insert combines a wear-resistant top layer with a tough substrate, which reduces the frequency of index changes and keeps cycle times steady. This leads to measurable productivity improvements in series production and fewer unscheduled tool changes, supporting a smoother machining process. Engineered for difficult materials and reliable chip control Designed for the material groups P, M and S, the geometry and grade are suited to machining unalloyed and alloyed Steel, stainless steels and heat-resistant superalloys and titanium. The F57 chipbreaker promotes controlled chip formation, reducing the risk of workpiece damage and improving surface quality. For operators less familiar with ISO group codes: P = steels, M = stainless steels, S = superalloys/titanium — the insert’s design addresses the typical heat and built-up edge tendencies of these groups. Robust geometry that supports aggressive milling strategies The insert’s 0° (negative) rake angle gives a sturdier cutting edge for roughing and interrupted cuts, enhancing resistance to chipping and edge deformation. With plate size 07 and thickness 05, this format balances edge strength and insert stability for many common milling cutters. The ISO designation XNGU0705ANN-F57 WSP45G indicates the combination of geometry, chipbreaking and the WSP45G grade; together these specifications enable dependable performance in both high-volume machining and demanding standalone operations. Contact Metav Werkzeuge today for sample availability, application recommendations or to discuss how the Walter Tools Tiger·tec Gold inserts can be integrated into existing milling processes Technical data Article number: XNGU0705ANN-F57-WSP45G-WALTER SKU: XNGU0705ANN-F57-WSP45G-WALTER Product type: Fräswendeschneidplatte / milling indexable insert Manufacturer: Walter Tools Facts Plate size: 07 Plate thickness: 05 Rake / relief: 0° (negative) Tolerance class: G Special features Series: Tiger·tec Gold Grade: WSP45G (coated carbide) Chipbreaker: F57 Execution: U Material applicability: P / M / S (Steel, stainless steels, superalloys/titanium) ISO designation: XNGU0705ANN-F57 WSP45G FAQ What materials is this insert suitable for? The XNGU0705ANN-F57 WSP45G insert is engineered for Steel, stainless steels and superalloys/titanium (ISO groups P, M, S) and supports stable cutting in these applications. How does the Tiger·tec Gold coating benefit milling operations? The Tiger·tec Gold coating on this Walter Tools grade enhances wear resistance and thermal stability, which prolongs edge life and supports consistent machining performance. What advantage does the 0° (negative) clearance provide? A 0° (negative) rake increases edge robustness under heavy loads and interrupted cuts, reducing chipping and enabling more aggressive material removal in demanding milling tasks. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter Tools is part of a global tool portfolio. Protected trademarks and trade names remain the property of their respective owners and are used here for explanatory purposes only. There is no affiliation implied between Metav Werkzeuge and the trademark owners. The offered item is an original, factory-new product of the manufacturer.
XNGX0705ANN-F67 WAK15 Wendeplatten - Walter Tools
Benefit from the combination of the sharp WAK15 grade and the F67 chipbreaker for controlled chip formation and high productivity in aluminium machining; order the XNGX0705ANN‑F67 WAK15 milling insert via Metav Werkzeuge or consult the technical team for application guidance. XNGX0705ANN-F67 WAK15 milling insert for aluminium and non‑ferrous metals — Walter Tools XNGX0705ANN-F67 WAK15 is a purpose‑built milling indexable insert designed for high‑efficiency machining of aluminium and other non‑ferrous materials in industrial production settings Uncoated carbide WAK15 grade Optimised F67 chipbreaker geometry Intended for aluminium and non‑ferrous metals Negative 0° rake for stable cutting Faster, cleaner aluminium machining with sharp geometry The XNGX0705ANN‑F67 WAK15 insert combines a very sharp cutting edge with an uncoated carbide base to reduce material adhesion when machining aluminium and similar non‑ferrous alloys. The WAK15 grade provides a cutting geometry that favours low friction and minimal built‑up edge, resulting in smoother surfaces and less burr formation. For production environments where cycle time and component finish matter, this insert translates the material and geometry choices into measurable improvements in process stability and surface quality. Consistent chip control and reduced rework through the F67 breaker The integrated F67 chipbreaker is engineered to create predictable chip segmentation for soft, ductile materials. Combined with the negative 0° rake, this leads to stable cutting forces and improved heat distribution at the cutting zone. The result is fewer interrupted cuts and less risk of chip entanglement on the tool or workpiece, which in turn reduces the need for manual rework and supports higher throughput on automated machines. The geometry is particularly advantageous when machining profiles where chip evacuation and surface consistency are priorities. Robust series design that fits established tool systems Built as part of the Walter N‑series, the insert follows proven industrial standards for indexable milling solutions and is supplied in the standard X‑type execution. The compact plate size and thickness ensure compatibility with common Walter toolholders and clamping systems, enabling quick tool changes and predictable runout behaviour. This coherence between insert design and tool system simplifies inventory and planning, helping production planners maintain uptime and consistency across multiple machining centres. Workshop guidance and practical application notes For best results when using this insert on aluminium and other non‑ferrous metals, stable workholding and appropriate speeds are recommended to exploit the sharp edge geometry without premature wear. Although the grade is uncoated, the WAK15 composition is optimised for non‑ferrous performance; machining lubricants and adequate coolant application will further extend edge life and surface quality. For integration into an existing tool stack, the insert suits tasks where chip control and surface finish are key performance indicators. For tailored application advice or to request delivery of the XNGX0705ANN‑F67 WAK15 from Metav Werkzeuge, contact Metav Werkzeuge’s technical team by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav Werkzeuge can advise on toolholder compatibility and batch supply solutions. Technical data Article number: XNGX0705ANN-F67-WAK15-WALTER SKU: XNGX0705ANN-F67-WAK15-WALTER Facts Plate size: 07 Plate thickness: 05 Rake angle: 0° (negative) Tolerance class: G Special features Series: Walter N‑Sortensystem Grade: WAK15 (uncoated carbide) Chipbreaker: F67 Application: Aluminium and non‑ferrous metals FAQ Is this insert suitable for general aluminium machining? The XNGX0705ANN‑F67 WAK15 insert and its WAK15 grade are explicitly intended for aluminium and non‑ferrous metals, offering sharp edges and an F67 chipbreaker optimised for those materials. Can the uncoated WAK15 grade handle high feed rates? The WAK15 uncoated carbide in the XNGX0705ANN‑F67 is designed for productive machining of non‑ferrous alloys; appropriate feed and speed settings should be matched to the application to balance surface finish and tool life. How does the F67 chipbreaker affect surface finish? The F67 chipbreaker promotes controlled chip formation in ductile materials, which helps maintain a consistent surface quality and reduces the need for secondary finishing operations when using the insert. Is this insert compatible with Walter N‑series toolholders? Yes — the insert belongs to the Walter N‑Sortensystem and is manufactured to fit the corresponding indexable milling systems produced by Walter Tools. What edge preparation does the WAK15 grade feature? WAK15 is supplied as an uncoated carbide with geometry optimised for low adhesion and smooth cutting in non‑ferrous materials; edge preparation focusses on sharpness rather than coatings for thermal resistance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, brand‑new product from Walter Tools. The Walter AG (marketed as Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group.
XNGX0705ANN-F67 WHH15X WHH15X Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide grade WHH15X, the F67 chipbreaker and the 0° negative rake for reliable chip control and stable cutting. Order directly via Metav Werkzeuge or ask their consultants for application support and availability. XNGX0705ANN-F67 WHH15X milling indexable insert by Walter Tools — coated carbide, F67 chipbreaker XNGX0705ANN-F67 WHH15X is a coated carbide milling indexable insert designed for robust, controlled metal-cutting operations where stable chip formation and repeatable edge life are required. Coated carbide WHH15X Negative rake 0° for robust cutting F67 chipbreaker for controlled chips Size 07, thickness 05 Stable cutting and predictable tool life for efficient production The coated carbide grade WHH15X provides a balance between wear resistance and edge robustness, making this insert suitable for a range of general milling tasks where reproducible performance is important. Combined with the F67 chipbreaker, the design promotes consistent chip formation which reduces interruptions and increases process efficiency. The combination of the coating and the chipbreaker is intended to lower tooling costs through longer effective cutting intervals and fewer unexpected tool changes. Improved process reliability through controlled chip flow The F67 chipbreaker is engineered to direct chips away from the cutting zone and minimise re-cutting of swarf, supporting a more stable machining cycle and a cleaner work area. The 0° negative rake geometry contributes to a stronger cutting edge and reduced tendency for edge chipping under interrupted cuts or heavier engagement, which helps maintain surface finish and dimensional consistency over multiple parts. Clear guidance on application and material suitability The insert is supplied in the Walter Schneidstoffsorte series and its specific werkstoffeignung should be checked in the manufacturer product matrix. The cutting material is indicated as coated hardmetal (coated carbide) which is commonly selected for a wide range of workpiece materials; confirm compatibility with the detailed technical matrix before series production. For specialised substrates or high-alloy materials, consult the technical documentation to ensure the WHH15X grade matches the intended cutting conditions. Dimensions, tolerance and mounting considerations for secure use Key identifiers such as Size 07 and thickness 05 are part of the ISO designation XNGX0705ANN-F67 WHH15X and the insert is specified to tolerance class G. The negative 0° free angle influences seat design and clamping; ensure the chosen toolholder is compatible with this geometry to achieve correct axial and radial support. When selecting clamping hardware, prioritise stable seating to make the most of the insert's chip control and edge stability. Contact Metav Werkzeuge for technical advice on Walter Tools' WHH15X inserts and to discuss availability, suitable toolholders and application-specific recommendations via Metav Werkzeuge. Technical data Article number: XNGX0705ANN-F67-WHH15X-WALTER ISO designation: XNGX0705ANN-F67 WHH15X Manufacturer: Walter Tools Facts Tolerance class: G Free angle: 0° (negative) Size code: 07 Thickness code: 05 Chipbreaker: F67 Special features Coating: beschichtetes Hartmetall (coated carbide) Grade / sort: WHH15X Series: Walter Schneidstoffsorte - Serie offen Execution code: X Designation without grade: XNGX0705ANN-F67 FAQ What materials is this insert suitable for? Material suitability must be checked in the Walter product matrix; the XNGX0705ANN-F67 WHH15X is a coated carbide insert intended for versatile machining but specific workpiece compatibility should be verified against the manufacturer's recommendations. How does the F67 chipbreaker affect chip control? The F67 chipbreaker on this insert channels chips to reduce entanglement and re-cutting, improving process stability and surface quality when the insert is used in appropriate cutting conditions. What does the 0° negative rake mean for clamping? A 0° negative rake provides a stronger cutting edge and generally requires a holder designed for negative-rake inserts to ensure correct seating and to maintain the intended cutting geometry. Where can the detailed tolerances and dimensions be found? Refer to the ISO designation XNGX0705ANN-F67 WHH15X and the technical documentation provided by Walter Tools for full dimensional drawings and tolerance data for tolerance class G. Is WHH15X a coated or uncoated grade? WHH15X is specified as a coated carbide grade; the coating enhances wear resistance and contributes to predictable edge life under the recommended cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Die Walter AG (Markenauftritt: Walter Tools) gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XNGX0705ANN-F67 WPM15G WPM15G Wendeplatten - Walter Tools
The combination of a Tiger‑tec Gold coated grade and the WPM15G substrate ensures extended tool life and consistent surface quality, while the 0° negative rake and F67 chipbreaker deliver robust cutting performance and reliable chip control; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. XNGX0705ANN-F67 WPM15G milling indexable insert, Tiger‑tec Gold, 0° negative rake — Walter Tools The XNGX0705ANN-F67 WPM15G is a coated carbide milling indexable insert engineered for productive machining with controlled chip formation in general milling applications. Tiger‑tec Gold coated grade WPM15G 0° negative rake for robust cutting edge F67 chipbreaker for predictable chip control Size 07, thickness 05 — compact insert geometry Durable coating for longer cutting life The Tiger‑tec Gold coating combined with the WPM15G grade offers a marked improvement in wear resistance and thermal stability compared with uncoated grades, which translates into longer tool life and fewer insert changes on the production line. Coated carbide technology reduces flank and crater wear under mixed cutting conditions; this means less downtime and a more predictable maintenance cycle. For customers planning batch production or continuous machining, the enhanced durability supports higher overall productivity and lower tooling cost per part. Geometry that stabilises aggressive cutting A 0° negative rake provides a stable cutting edge that resists chipping, particularly in interrupted cuts or when encountering varying material conditions. The F67 chipbreaker promotes consistent chip formation, reducing the risk of long, tangled swarf and helping to protect the workpiece surface. Together, these features make the insert suitable for operations where edge security and repeatable chip control are essential for process reliability. Compact form for flexible toolholder use The compact size 07 and thickness 05 format ensures compatibility with a wide range of indexable milling cutters designed for this ISO designation, allowing straightforward integration into existing tool assemblies. The insert’s geometry supports stable clamping and reduced vibration, which benefits surface finish and dimensional stability even in semi‑finishing passes. When configuring tooling for versatile machining centres, this insert provides a balance between rigidity and cutting performance. Practical guidance for material selection The WPM15G grade is a Walter Tools coated carbide variant from the Tiger‑tec Gold series; suitability for specific materials should be checked against the product matrix provided by the manufacturer or supplier. If material compatibility or optimal cutting parameters are unclear, consult the technical documentation for the series and the grade, or contact Metav Werkzeuge for tailored recommendations to match workpiece material and machining strategy. Discuss specifications and application options with Metav Werkzeuge to ensure the correct Walter Tools insert is selected for the machining task — call +49 2822 7131930 or email info@metav-werkzeuge.com for expert support and fast delivery. Technical data SKU: XNGX0705ANN-F67-WPM15G-WALTER Designation: XNGX0705ANN-F67 WPM15G Product type: Milling indexable insert Manufacturer: Walter Tools Core numerical data Insert size: 07 Thickness: 05 Rake angle: 0° (negative) Tolerance class: G Special features and materials Grade: WPM15G (Tiger‑tec Gold coated carbide) Chipbreaker: F67 Series: Tiger‑tec Gold Substrate/coating: coated carbide (as per manufacturer specification) FAQ What is the primary benefit of this insert? The XNGX0705ANN-F67 WPM15G milling insert by Walter Tools combines Tiger‑tec Gold coating and the WPM15G grade to increase wear resistance and tool life, improving process stability in continuous machining. Which chip control does the insert provide? The insert is equipped with the F67 chipbreaker; this geometry provides controlled chip formation and assists in avoiding long swarf during milling operations. How does the 0° negative rake affect machining? A 0° negative rake produces a robust cutting edge that reduces the likelihood of chipping and helps maintain consistent cutting performance under variable conditions. Which toolholders accept this insert? The insert follows the ISO designation XNGX0705ANN-F67 and is intended for milling cutters compatible with size 07 inserts and the specified insert form. How to confirm the insert is suitable for a specific material? Consult the Walter Tools product matrix for WPM15G suitability; if uncertain, refer to Metav Werkzeuge for advice on matching the insert to the workpiece material and machining parameters. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes; there is no affiliation between Metav Werkzeuge and the named brands. The offered item is an original, factory‑new product from the stated manufacturer.
XNGX0904ANN-F67 WHH15X Wendeplatten - Walter Tools
Take advantage of the combination of robust chip control, a coated carbide grade and a 0° negative rake for stable, productive milling — order the insert directly via Metav Werkzeuge or consult the specialists for application matching. XNGX0904ANN-F67 WHH15X Milling indexable insert — 0° negative rake, chipbreaker F67 (Walter Tools) The XNGX0904ANN-F67 WHH15X is a high-performance milling indexable insert intended for versatile industrial milling tasks, combining a coated carbide grade with a defined chipbreaker for improved process reliability. Coated carbide grade WHH15X 0° negative rake for robust cutting Chipbreaker F67 for consistent chip control Size 09, thickness 04, tolerance class G Higher productivity through controlled chip formation and coating benefits The coated carbide grade WHH15X provides a balance of wear resistance and toughness that supports longer tool life and consistent part quality in milling operations. Combined with the chipbreaker F67, the insert promotes predictable chip formation, which reduces the risk of recutting and contributes to stable machining cycles. For manufacturing environments where throughput and repeatability matter, this combination helps to maintain surface finish and minimise interruptions due to chip management. Durable cutting geometry for demanding milling conditions The 0° negative rake geometry delivers a robust cutting edge that tolerates variable cutting forces and intermittent engagement, making the insert suitable for interrupted cuts and mixed-application workpieces. The defined tolerance class G ensures interchangeability and reliable seating in compatible toolholders, which supports quick index changes on the shop floor and reduces setup time. Where process continuity is a priority, the geometry and tolerance together help secure predictable performance. Practical compatibility and application guidance for selection The insert is supplied as the designation XNGX0904ANN-F67 WHH15X and is manufactured under the Walter Tools series. With size 09 and thickness 04, it fits corresponding milling cutters designed for this insert format; matching the correct cutter family is essential for safe and accurate use. Material suitability is determined by the product matrix in the catalogue, so reference to the manufacturer’s matrix will clarify whether the insert is recommended for specific metals or hardened materials. The coated carbide construction aims to cover a broad range of workpiece materials while offering stable chip formation and reliable edge life. For production-critical milling with Walter Tools’ WHH15X grade, contact Metav Werkzeuge for tailored application advice and fast delivery — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: XNGX0904ANN-F67-WHH15X-WALTER Label: Fräswendeschneidplatte XNGX0904ANN-F67 WHH15X Walter Tools Manufacturer: Walter Tools Product type: Milling indexable insert Designation: XNGX0904ANN-F67 Facts Size: 09 Thickness: 04 Free cutting angle: 0° (negative) Chipbreaker: F67 Tolerance class: G Special features Coating: Katalogabhängig Material: Katalogabhängig Carbide grade: WHH15X (coated carbide) Series: Walter Schneidstoffsorte - Serie offen Sortenhinweis: Suitability to be checked in product matrix FAQ What materials is the XNGX0904ANN-F67 WHH15X suitable for? The XNGX0904ANN-F67 WHH15X is a coated carbide insert; specific material ranges and recommended cutting data are indicated in the manufacturer’s product matrix and catalogue. What advantage does the 0° negative rake provide? A 0° negative rake gives a robust cutting edge that resists mechanical shock and performs well in interrupted cuts, improving edge stability under variable load. How does the F67 chipbreaker affect machining? The F67 chipbreaker is designed to control chip segmentation and evacuation, which reduces recutting and helps to maintain surface quality and process reliability. Which toolholders are compatible with this insert format? The insert uses size 09 and thickness 04 dimensions; compatibility requires a cutter body designed for XNGX0904ANN-F67 style inserts and the matching clamping system specified by the cutter manufacturer. What does tolerance class G mean for interchangeability? Tolerance class G indicates a standardised fit and dimensional consistency, supporting reliable seating and repeatable indexing across compliant toolholders. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only and indicate no affiliation with our company. The offered item is original, factory-new merchandise of the manufacturer. The Walter AG (marketed as Walter Tools) is among the world’s leading manufacturers of precision cutting tools for metalworking and is part of the Sandvik Group.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com