XNGX0904ANN-F67 WPM15G WPM15G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold technology and the WPM15G coated-carbide grade for reliable wear resistance and stable chip formation; the F67 chipbreaker combined with a 0° negative rake provides robust edge strength for demanding milling tasks — order through Metav Werkzeuge or contact our consultants for application advice. XNGX0904ANN-F67 WPM15G indexable milling insert — Tiger·tec Gold, 0° negative rake (F67) by Walter Tools A XNGX0904ANN-F67 WPM15G indexable milling insert engineered for high wear resistance and consistent chip control in industrial milling applications Tiger·tec Gold coating for high wear resistance WPM15G grade: coated carbide for versatile use F67 chipbreaker for consistent chip control 0° negative rake for enhanced edge stability Extended tool life through advanced coating and grade The combination of Tiger·tec Gold coating and the WPM15G coated-carbide grade delivers improved wear resistance and thermal stability, which extends service intervals and supports consistent part quality. Coating technology reduces flank and crater wear during continuous operation, while the grade’s substrate is optimised for a broad range of machining scenarios; material-specific suitability should be verified in the manufacturer’s product matrix to match the insert to the application. This balance of surface protection and substrate toughness translates into fewer tool changes and more predictable production cycles. Robust cutting performance and controlled chip formation The integrated F67 chipbreaker is designed to produce reliable chip control and support steady cutting forces during milling. Combined with the 0° negative rake, the geometry prioritises edge strength and resilience, making the insert well suited to interrupted cuts and operations where a secure cutting edge is essential. The insert’s size and thickness coding (09 / 04) contribute to mechanical stability in the pocket, reducing vibration and promoting repeatable surface finish. Clear chip management and a strong cutting edge result in more efficient material evacuation and improved process reliability. Process security and seamless production integration Tolerance class G and the proven Walter Tools manufacturing standards ensure reproducible dimensions and consistent mounting performance across batches, supporting high-volume machining and repeatability. The insert’s execution code and series affiliation with Tiger·tec Gold signal a focus on modern coating technology and optimised chip formation. For production planning, the catalogue-dependent material information and the manufacturer’s recommendations should be consulted to confirm the best cutting data and suitable workpiece materials. When integrated into an indexed tooling system, these inserts contribute to lower setup times and predictable tool life, improving overall throughput. Contact Metav Werkzeuge for application-specific recommendations, availability details and to discuss the suitability of Walter Tools XNGX0904ANN-F67 WPM15G inserts for the intended machining task — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data SKU: XNGX0904ANN-F67-WPM15G-WALTER Designation: XNGX0904ANN-F67 WPM15G Manufacturer: Walter Tools Product type: indexable milling insert Series: Tiger·tec Gold Grade: WPM15G Chipbreaker: F67 Rake angle: 0° (negative) Size code: 09 Thickness code: 04 Core specifications Tolerance class: G Plate size code: 09 Plate thickness code: 04 Rake angle: 0° (negative) Features and versions Coating technology: Tiger·tec Gold Grade type: coated carbide Execution code: X Material information: catalogue-dependent Recommendation: check product matrix for material suitability FAQ Which materials can be machined with this insert? Material suitability depends on the specific application matrix; the XNGX0904ANN-F67 WPM15G insert is a coated-carbide grade within the Tiger·tec Gold family and requires verification against the manufacturer’s product matrix for definitive material recommendations. What advantages does the F67 chipbreaker provide? The F67 chipbreaker promotes consistent chip control and smoother evacuation, which helps to stabilise cutting forces and contributes to improved surface finish when the insert is used under appropriate cutting conditions. How does a 0° negative rake affect performance? A 0° negative rake increases edge strength and resistance to chipping, making the insert particularly suitable for interrupted cuts and operations where a robust cutting edge is needed; this geometry prioritises durability over the light-cutting aggressiveness of positive rake designs. Is this insert suitable for high-speed milling? Suitability for high-speed milling must be confirmed with the manufacturer’s cutting data and the material matrix; the WPM15G grade with Tiger·tec Gold coating offers enhanced wear resistance, but recommended speeds and feeds vary by workpiece material and machining setup. How should the XNGX0904ANN-F67 WPM15G be integrated into a tooling system? The insert’s size and thickness coding (09 / 04) and tolerance class G ensure consistent fit in compatible milling cutters; for optimal results, match the insert to the correct cutter pocket and follow Walter Tools’ mounting and cutting-data recommendations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XNGX0904ZNN-F67 WAK15 Wendeplatten - Walter Tools
Take advantage of the combination of focused chip control, robust uncoated carbide and suitability for aluminium and other non‑ferrous metals to keep machining stable and productive; order the insert via Metav Werkzeuge or consult our specialists for integration advice. XNGX0904ZNN-F67 WAK15 milling insert by Walter Tools — uncoated carbide for aluminium and non‑ferrous metals The XNGX0904ZNN-F67 WAK15 is a dedicated milling indexable insert designed for efficient machining of aluminium and other non‑ferrous materials, featuring an F67 chipbreaker and a 0° negative clearance angle. Uncoated carbide for non‑ferrous materials F67 chipbreaker for consistent chip control 0° negative clearance for secure cutting edge Walter N‑series for predictable performance Faster, cleaner aluminium machining with optimised chip control The N‑grade WAK15 cutting material is an uncoated carbide designed specifically for aluminium and non‑ferrous alloys. Paired with the F67 chipbreaker, the geometry reduces material adhesion and forms controllable chips, which lowers the risk of built‑up edge and improves surface finish. For production environments where cycle time and repeatable quality matter, this combination delivers measurable gains in process reliability and minimises interruptions for manual chip clearing. Stable cutting edge and secure seating for repeatable results A 0° negative clearance angle provides a robust cutting edge that resists chipping during interrupted cuts and when engaging pocket walls. The insert’s tolerance class G and the Walter N‑series system ensure consistent seat fitting and repeatable positioning in the toolholder, which supports predictable dimensional accuracy across batches. This geometry is particularly advantageous when working with thin‑walled components or variable feed conditions, reducing scrap and rework. Practical integration and handling for shopfloor efficiency Produced for the Walter N‑series, the insert is easy to source and replace within standard milling systems, helping to shorten tool change times and maintain uptime. The design focuses on straightforward handling: the chipbreaker eases swarf evacuation, while the uncoated grade avoids issues that some coatings can introduce when machining soft, adhesive materials. For manufacturers aiming at high throughput of aluminium parts, the insert supports a balance of productivity and low maintenance without compromising surface quality. Contact Metav Werkzeuge for tailored advice on using Walter Tools inserts in production — call +49 2822 7131930 or email info@metav-werkzeuge.com for application support and availability. Technical data Article number: XNGX0904ZNN-F67-WAK15-WALTER Designation: XNGX0904ZNN-F67 WAK15 Manufacturer: Walter Tools Type: Milling indexable insert Core specifications Plate size: 09 Thickness code: 04 Chipbreaker: F67 Clearance angle: 0° (negative) Tolerance class: G Materials & features Grade: WAK15 (uncoated carbide) Material code: N (non‑ferrous metals) Suitable for: aluminium and non‑ferrous alloys Series: Walter N‑series Application focus: stable chip control and secure cutting edge FAQ What materials is the XNGX0904ZNN-F67 WAK15 suitable for? The XNGX0904ZNN‑F67 WAK15 insert is specified for aluminium and other non‑ferrous metals; the WAK15 uncoated carbide grade and the F67 chipbreaker optimise cutting behaviour for these materials. How does the F67 chipbreaker affect machining? The F67 chipbreaker creates short, controllable chips and minimises material adhesion, improving surface finish and reducing the chance of built‑up edge when machining aluminium with this Walter Tools milling insert. Why is the 0° negative clearance angle important? A 0° negative clearance provides a more robust cutting edge that tolerates interruptions and side loads better than positive‑rake geometries, contributing to longer edge life and fewer insert failures. Can this insert be used in standard Walter N‑series toolholders? Yes, the insert is designed for the Walter N‑series system, ensuring consistent seating and ease of replacement in compatible holders. What is the designation and SKU for ordering? Order the XNGX0904ZNN‑F67 WAK15 milling insert (SKU: XNGX0904ZNN‑F67‑WAK15‑WALTER) when specifying the uncoated grade for aluminium applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and product names belong to their respective owners. Brand names and trademarks are mentioned for explanation only; there is no affiliation between our company and the named brands. The offered article is original, factory‑new goods of the manufacturer.
XNGX0904ZNN-F67 WHH15X Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide grade WHH15X and a robust chipbreaker F67 to improve chip control and tool life, while the 0° negative clearance ensures a stable cutting edge for interrupted or heavy milling operations; order directly via Metav Werkzeuge or request a technical consultation. XNGX0904ZNN-F67 WHH15X indexable milling insert – Walter Tools, 0° negative clearance, chipbreaker F67 XNGX0904ZNN-F67 WHH15X is an indexable milling insert designed for productive milling operations where robust edge stability and controlled chip formation are required; suitability for specific materials should be checked against the product matrix. Coated carbide grade WHH15X Robust chipbreaker F67 for chip control 0° negative clearance for edge stability Tolerance class G Increased machining reliability through optimised chip control The insert is built on a coated carbide grade (WHH15X) that is designed to provide a balance between wear resistance and toughness. With the integrated chipbreaker F67, the geometry actively shapes chips for consistent evacuation, which reduces recutting and contributes to longer periods between tool changes. The negative clearance at 0° reinforces the cutting edge, making the insert particularly suited to operations with intermittent cuts or variable engagement. These features translate into a measurable increase in process reliability and less downtime for rework or tool replacement. Practical integration: dimensions, tolerance and handling benefits The designation highlights the compact form factor with size 09 and thickness 04, and the insert is manufactured to tolerance class G, providing consistent fit and repeatability in toolholders. The compact design supports high-feed and multi-tooth cutters where consistent pocket seating and runout control are essential. As the material is catalogue-dependent, it is recommended to consult the product matrix for exact substrate and coating information to ensure the correct balance between productivity and component finish. Proper selection reduces the risk of unexpected tool wear and helps maintain surface quality. Process-oriented advantages and brand assurance Being part of Walter Tools’ open-grade series, the insert benefits from a production philosophy aimed at stable cutting edges and consistent performance in coated carbide classes. The combination of the WHH15X grade and the F67 chipbreaker supports predictable tool behaviour across a range of cutting conditions, which aids process planning and cost forecasting. When integrated into a tool system, the insert delivers controlled chip formation and a robust edge to maintain machining continuity, helping to safeguard cycle times and repeatable results. For expert advice on integrating the WHH15X grade insert into existing tooling systems or to request material-specific recommendations, contact Metav Werkzeuge for a technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: XNGX0904ZNN-F67-WHH15X-WALTER Name/Designation: XNGX0904ZNN-F67 WHH15X Manufacturer: Walter Tools Product type: Indexable milling insert Facts Size: 09 Thickness: 04 Clearance: 0° (negative) Chipbreaker: F67 Tolerance class: G Special features Coated carbide grade WHH15X Series: Walter cutting grade – open series Material: catalogue-dependent Designation without grade: XNGX0904ZNN-F67 FAQ What materials is this insert suitable for? Material suitability must be verified in the product matrix; the WHH15X grade in the XNGX0904ZNN-F67 WHH15X insert is a coated carbide class intended for a range of applications, but exact compatibility depends on the catalogue specifications. What is the purpose of the F67 chipbreaker? The chipbreaker F67 controls chip shape and evacuation to minimise recutting and to maintain a stable cutting process, improving surface finish and extending effective tool life in many milling scenarios. How does the 0° negative clearance affect cutting performance? A 0° negative clearance provides a reinforced cutting edge that is less prone to chipping under interrupted cuts or heavy engagement, offering enhanced robustness compared with positive-rake geometries. What does tolerance class G indicate for this insert? Tolerance class G refers to the manufacturing tolerances for the insert dimensions and seating accuracy, ensuring consistent fit in compatible toolholders and reliable repeatability across production batches. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, brand-new product of the manufacturer (Walter Tools).
XNGX0904ZNN-F67 WPM15G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, the WPM15G grade and the controlled chipbreaker F67 to maintain stable cutting performance and predictable tool life; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. XNGX0904ZNN-F67 WPM15G milling insert — Tiger‑tec Gold coating, F67 chipbreaker (Walter Tools) The XNGX0904ZNN-F67 WPM15G is a coated carbide milling insert from the Tiger‑tec Gold series, engineered for robust chip formation control in roughing and semi-finishing operations Tiger‑tec Gold coating for reliable wear resistance Grade WPM15G — coated carbide performance Negative 0° geometry for stable cutting Chipbreaker F67 for controlled chip formation Consistent metalcutting performance with advanced coating The Tiger‑tec Gold technology delivers a coating system optimised for wear resistance and extended performance in intermittent and continuous milling. The combination of the WPM15G grade and the series coating helps to maintain a consistent cutting edge under fluctuating loads, which translates into fewer insert changes and higher process uptime. The integrated chipbreaker F67 supports stable chip control, reducing the risk of built-up edge and improving surface quality on repeatable components. Stable geometry for predictable results in production A negative 0° rake provides a robust cutting face that resists edge chipping during heavy engagement, making the insert suitable for demanding milling cycles where stability matters. The design emphasises a stable cutting edge and reproducible chip behaviour; this leads to lower vibration sensitivity and more uniform tool wear, which is particularly beneficial when multiple shifts or automated machining cells require consistent output. Application guidance and material compatibility The insert is supplied in the Tiger‑tec Gold range and uses a coated carbide grade; material suitability must be verified against the manufacturer’s product matrix to ensure optimal performance. While the WPM15G grade is intended for versatile use, checking the specific workpiece material and cutting conditions is recommended to define the correct speed and feed windows. For customers aiming to standardise tool lists, the insert’s predictable wear characteristics simplify process validation and reduce setup variability. Integration into industrial milling workflows With a recognised form factor (size 09, thickness 04) and the designated chip control geometry, the insert is designed for easy integration into established milling toolholders and indexable cutter systems. The F67 chipbreaker balances effective material removal with manageable chip shapes, supporting uninterrupted production and safer chip evacuation. The robust specification and toleranzklasse G contribute to repeatable mounting accuracy and reliable performance in serial manufacturing. For application support, cutting data or to place an order for the Walter Tools XNGX0904ZNN-F67 WPM15G milling insert, contact Metav Werkzeuge via email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our technical consultants will advise on the best setup for the intended workpiece and process. Technical data SKU: XNGX0904ZNN-F67-WPM15G-WALTER Designation: XNGX0904ZNN-F67 WPM15G Product type: milling insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPM15G Chipbreaker: F67 Rake angle: 0° (negative) Plate size: 09 Plate thickness: 04 Tolerance class: G Execution: X Core data Plate size: 09 Plate thickness: 04 Rake angle: 0° (negative) Tolerance class: G Special features Tiger‑tec Gold coating technology Coated carbide grade WPM15G Chipbreaker F67 for controlled chips Catalogue-dependent body material Series: Tiger‑tec Gold Walter Tools brand FAQ What applications suit the XNGX0904ZNN-F67 WPM15G milling insert? The XNGX0904ZNN-F67 WPM15G milling insert is designed for roughing and semi-finishing tasks where stable chip control and wear resistance are required; consult the product matrix for specific workpiece material suitability. How does the F67 chipbreaker influence machining? The chipbreaker F67 produces controlled chip shapes that improve evacuation and reduce re-cutting, enhancing process stability when using the WPM15G grade and Tiger‑tec Gold coating. Is the negative 0° geometry suitable for interrupted cuts? Yes, the negative 0° geometry offers a robust cutting edge that tolerates intermittent engagement and helps prevent edge chipping under tough conditions. Can this insert be used across a toolholder range? The insert’s standard size and thickness codes (09 / 04) make it compatible with a variety of indexable milling cutters; verify holder compatibility and clamping specifications before fitting. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschliesslich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XNGX1205ANN-F67 WAK15 Wendeplatten - Walter Tools
Efficient chip control from the F67 chipbreaker together with the WAK15 uncoated carbide grade provides dependable performance in aluminium and other non-ferrous machining; order this insert via Metav Werkzeuge or consult the team for tailored application advice. Milling indexable insert XNGX1205ANN-F67 WAK15 by Walter Tools A precision milling insert, XNGX1205ANN-F67 WAK15, optimised for aluminium and non-ferrous metals in the Walter N-grade system Uncoated carbide grade WAK15 Designed for aluminium and NE-metals Chipbreaker F67 for secure chip control Negative rake 0° for robust cutting Consistent performance in aluminium machining The WAK15 grade is an uncoated carbide specifically developed for machining aluminium and other non-ferrous metals. Its microstructure and edge preparation deliver sharp cutting edges with reduced built-up edge formation, which improves surface finish and extends edge life when compared with generic grades. The combination of the grade and the insert geometry means fewer workpiece rejects and more predictable tool life, supporting stable production runs in component manufacture. Secure chip control for uninterrupted throughput The integrated F67 chipbreaker is designed to fragment swarf reliably during high-feed and light-cut aluminium operations. Efficient chip formation reduces the risk of re-cutting, minimises machine downtime for cleaning and contributes to a repeatable surface quality. In practical terms, better chip control lowers cycle-time variability and simplifies part handling in automated or semi-automated milling cells. Robust cutting geometry for reliable tool life With a 0° negative rake the insert is configured for strength at the cutting edge, offering improved resistance to mechanical shock and occasional interrupted cuts. This geometry supports heavier feed rates where necessary and reduces the likelihood of edge chipping, thus maintaining dimensional stability across batches. The stable edge and tolerance class G ensure predictable performance in production-focused environments. Simple integration and material compatibility Belonging to the Walter N-grade system, this insert is compatible with common milling toolholders that accept the XNGX-style form. The designation signals suitability for aluminium and related alloys; the grade performs well with typical non-ferrous alloys used in automotive, aerospace subcomponents and general engineering. For workshops upgrading from general-purpose inserts, this specification offers a clear improvement in finish and cycle consistency without complex tooling changes. Contact Metav Werkzeuge for specific application advice, availability and recommended toolholder pairings for the Walter Tools XNGX1205ANN-F67 WAK15 insert Technical data SKU: XNGX1205ANN-F67-WAK15-WALTER Product type: Milling indexable insert WPL designation: XNGX1205ANN-F67 WAK15 Core data Plate size: 12 Thickness: 05 Relief angle: 0° (negative) Tolerance class: G Features Grade: WAK15 (uncoated carbide) Chipbreaker: F67 Series: Walter N-Sortensystem Material group: N (non-ferrous metals) Execution: X FAQ What materials is this insert suitable for? This milling insert, XNGX1205ANN-F67 WAK15 by Walter Tools, is designed for aluminium and non-ferrous metals as indicated by the N material group. Is the WAK15 grade coated or uncoated? The WAK15 grade is an uncoated carbide grade; the insert relies on sharp geometry and chipbreaker design rather than a coating. What benefit does the F67 chipbreaker provide? The F67 chipbreaker improves swarf fragmentation and evacuation, enhancing process stability and surface quality when machining non-ferrous materials. How does the 0° negative rake affect cutting? A 0° negative rake offers a robust cutting edge, reducing the risk of chipping during interrupted cuts and supporting higher feed rates where required. Which tool system does this insert belong to? The insert is part of the Walter N-grade system and fits toolholders compatible with the XNGX1205ANN-F67 form. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. It is stated that the offered item is original, factory-new goods of the manufacturer. The mention of brand names serves explanatory purposes only and does not imply any affiliation between Metav Werkzeuge and the trademark owners.
XNGX1205ANN-F67 WHH15X Wendeplatten - Walter Tools
Combining the WHH15X coated carbide grade with the F67 chipbreaker and a 0° negative rake delivers robust edge strength and consistent chip control, improving cycle-time stability and part quality. Order the XNGX1205ANN-F67 WHH15X directly via Metav Werkzeuge or consult the specialists for application-specific cutting data. XNGX1205ANN-F67 WHH15X — milling insert, 0° negative rake, F67 chipbreaker — Walter Tools The XNGX1205ANN-F67 WHH15X is a coated carbide milling insert engineered for productive milling tasks where controlled chip formation and stable cutting edges are required. 0° negative rake for robust cutting edge F67 chipbreaker for consistent chip control WHH15X coated carbide grade for process stability Tolerance class G for repeatable positioning Durable design for dependable machining performance The insert combines a coated carbide grade with a negative rake to prioritise edge strength and wear resistance. The 0° negative rake increases the mechanical support behind the cutting edge, reducing the risk of chipping in interrupted cuts and heavy engagement. Where process reliability is critical, this geometry helps maintain consistent tool life and reduces unplanned tool changes, which supports smoother production runs and predictable maintenance cycles. Precision chip control that supports productivity The integrated F67 chipbreaker is designed to break and evacuate chips reliably under a range of milling conditions. Controlled chip formation lowers the likelihood of built-up edge and prevents recutting, which contributes to stable surface finish and reduced cycle time. By pairing the chipbreaker with the WHH15X grade, the insert targets consistent machining behaviour; however, material suitability should be confirmed against the product matrix to ensure optimal cutting data and speeds. Integration and quality assurance for workshop use The geometry and G tolerance class enable straightforward indexing and repeatable seating in standard milling toolholders, simplifying tool management. The insert’s 12 size and 05 thickness are indicated in the specification and support compatibility checks during tool assembly. Technical documentation and the manufacturer’s grade matrix will guide the selection of speeds and feeds to match specific workpiece materials and machining strategies, keeping process windows tight and reproducible. Contact Metav Werkzeuge for tailored cutting data and procurement of Walter Tools inserts; expert advice and application checks are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: XNGX1205ANN-F67-WHH15X-WALTER Article: XNGX1205ANN-F67 WHH15X Product type: milling insert Manufacturer: Walter Tools Grade: WHH15X Series: Walter Schneidstoffsorte - Serie offen Material: Catalogue-dependent Core figures Size: 12 Thickness: 05 Free rake angle: 0° negative Tolerance class: G Special features Chipbreaker: F67 Coated carbide grade Execution: X Series and sort description: WHH15X coated carbide Indexable geometry for stable seating FAQ What materials is this insert suitable for? The WHH15X grade offers coated carbide properties; suitability for specific materials should be checked in the product matrix and cutting data to confirm the best application for the XNGX1205ANN-F67 WHH15X insert. How does the 0° negative rake affect performance? A 0° negative rake increases edge support and resistance to chipping, improving robustness in heavy cuts or interrupted milling when used with the appropriate cutting parameters. Can the F67 chipbreaker be used for roughing and finishing? The F67 chipbreaker is designed for controlled chip formation; whether it is appropriate for roughing or finishing depends on the selected feeds, speeds and material—refer to the manufacturer’s recommended cutting data. What does tolerance class G mean for tool set-up? Tolerance class G denotes a defined manufacturing tolerance that supports repeatable seating and positioning of the insert in compatible milling toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners and are mentioned here for explanation only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the respective manufacturer.
XNGX1205ANN-F67 WPM15G WPM15G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WPM15G carbide grade for sustained cutting performance and reliable chip control; order the XNGX1205ANN-F67 WPM15G insert directly via Metav Werkzeuge or consult our specialists for process integration. XNGX1205ANN-F67 WPM15G indexable milling insert, F67 chipbreaker, Tiger·tec Gold – Walter Tools XNGX1205ANN-F67 WPM15G is an indexable milling insert designed for productive milling operations where consistent chip control and extended tool life are required Tiger·tec Gold coating technology WPM15G coated carbide grade F67 chipbreaker for secure chip control 0° negative rake for stable cutting Increase cutting performance with a premium coating The combination of Tiger·tec Gold and the WPM15G grade provides a secure basis for higher cutting speeds and longer intervals between tool changes. The advanced coated carbide structure reduces flank wear and supports a steady cutting edge under varying cutting parameters, which translates into improved machining throughput. For production environments that demand repeatable results, this coating-grade pairing helps to maintain consistent dimensional accuracy and surface finish over extended runs. Minimise interruptions through reliable chip formation The F67 chipbreaker is engineered to produce controlled chip shapes in common milling operations, reducing the risk of entanglement and tool damage. Coupled with the 0° negative rake, the insert offers a robust cutting geometry that increases process stability and resists edge chipping under intermittent cutting conditions. In practice, this means fewer stoppages for chip clearing and a lower probability of rejected parts due to irregular chip behaviour, supporting a more predictable production rhythm. Easy integration into standard milling setups As an indexable milling insert, the product matches established toolholders and tool families that accept the XNGX1205ANN-F67 form. The nominal insert dimensions and a plate thickness of 05 ensure compatibility with common systems, while the serial Tiger·tec Gold classification signals a coated, wear-resistant solution suitable for a wide range of applications. Note: material suitability should be verified against the product matrix to determine the optimal cutting data for specific workpiece materials. Contact Metav Werkzeuge today to discuss how the Walter Tools XNGX1205ANN-F67 WPM15G insert can be implemented in current milling processes; our team can advise on cutting parameters and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: XNGX1205ANN-F67-WPM15G-WALTER SKU: XNGX1205ANN-F67-WPM15G-WALTER Product type: Indexable milling insert Manufacturer: Walter Tools Series: Tiger-tec Gold Designation: XNGX1205ANN-F67 WPM15G Facts Insert size: 12 Thickness: 05 Rake angle: 0° (negative) Chipbreaker: F67 Tolerance class: G Grade: WPM15G Special features Coating: Tiger·tec Gold (coated carbide) Material reference: Katalogabhängig Execution: X Note: Check product matrix for workpiece suitability Application: Indexable milling operations FAQ What materials is this insert suitable for? The XNGX1205ANN-F67 WPM15G insert, produced by Walter Tools and rated in the Tiger·tec Gold family, is designed as a wear-resistant coated carbide solution; material suitability should be checked against the product matrix to select optimal cutting data. How does the F67 chipbreaker improve machining? The F67 chipbreaker promotes controlled chip formation and reduced entanglement risk, which helps maintain steady feed rates and minimises interruptions in milling processes when using this Walter Tools insert. Why is the 0° negative rake beneficial for milling? A 0° negative rake provides a more robust cutting edge and improved resistance to impact and edge chipping, increasing process stability in interrupted or heavy-duty milling operations. Can this insert be used in standard toolholders? Yes, the XNGX1205ANN-F67 form factor is an indexable milling insert compatible with common holders designed for this geometry and size; confirm holder compatibility with the insert designation before assembly. What performance advantages does the Tiger·tec Gold coating deliver? The Tiger·tec Gold coating enhances heat resistance and reduces abrasive wear, extending tool life and allowing for higher cutting speeds compared with uncoated or standard grades. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only; there is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
XNGX1205ENN-F67 WAK15 Wendeplatten - Walter Tools
Take advantage of the combination of precise chip control, a purpose-designed WAK15 grade for aluminium, and a robust negative geometry that keeps production steady and efficient; order the inserts directly via Metav Werkzeuge or ask the consultants for application advice. XNGX1205ENN-F67 WAK15 milling insert by Walter Tools — negative 0° geometry, chipbreaker F67 XNGX1205ENN-F67 WAK15 is a negative‑geometry milling insert engineered for efficient machining of aluminium and other non‑ferrous metals within the Walter N‑grade system Walter N‑grade system for non‑ferrous metals Uncoated carbide WAK15 for aluminium Chipbreaker F67 reduces material adhesion Negative 0° geometry for secure cutting Consistent performance for aluminium production The uncoated carbide WAK15 grade delivers a cutting edge tailored for aluminium and similar non‑ferrous materials, combining sharpness and heat resistance to reduce built‑up edge. As part of the Walter N‑grade system, the insert promotes repeatable precision across batch production, helping to maintain tolerances while reducing downtimes for rework. The integrated chipbreaker F67 assists in controlled chip formation, translating into fewer interruptions and more consistent cycle times. Geometry and chip control that improve surface quality A negative 0° geometry gives the insert a secure seating and reliable shear behaviour, which supports stable cutting forces and improved tool life under variable machining conditions. The chipbreaker F67 works together with the edge form to minimise adhesion and aid chip evacuation, resulting in a better surface finish on soft, gummy alloys. This combination increases process reliability and lowers the risk of built‑up edge compromising component quality. System compatibility and application range Designed for customers working predominantly with aluminium and other non‑ferrous metals, the insert integrates into Walter milling tool systems where consistent chip control is required. The product suits machining shops and manufacturing lines aiming for productive, low‑maintenance operations. For specification matching and toolholder compatibility, Metav Werkzeuge can provide targeted advice and recommendations for cutter bodies and clamping solutions. Practical selection and handling guidance The insert is offered in a designation that indicates its plate size and thickness, with a tolerance class G for dimensional consistency and a plate size of 12 and thickness 05, enabling reliable indexability and replacement intervals. The negative geometry simplifies clamping forces, while the uncoated grade reduces risks of coating transfer on soft alloys. Select this insert where controlled chipbreak and minimal adhesion are priorities for recurring aluminium machining tasks. Consult Metav Werkzeuge for tailored selection of Walter Tools inserts and arrange supply via info@metav-werkzeuge.com or by phone on +49 2822 7131930 to match the XNGX1205ENN-F67 WAK15 to specific toolholders and applications Technical Data SKU: XNGX1205ENN-F67-WAK15-WALTER Designation: XNGX1205ENN-F67 WAK15 Product type: Milling insert Manufacturer: Walter Tools Series: Walter N‑grade system Material group: N (non‑ferrous metals) Core data Size: 12 Thickness: 05 Free angle: 0° (negative) Tolerance class: G Chipbreaker: F67 Special features Grade: WAK15 (uncoated carbide) Application: Aluminium and non‑ferrous metals Geometry: Negative insert System compatibility: Walter N‑grade system FAQ Is this insert suitable for machining aluminium? Yes. The XNGX1205ENN-F67 WAK15 insert is specified for aluminium and other non‑ferrous metals and is supplied in the Walter N‑grade system for those materials. Does the insert have a coating? No. The WAK15 designation indicates an uncoated carbide grade optimised for soft, adhesive materials where coatings would not provide the same edge behaviour. What is the role of the chipbreaker F67? The chipbreaker F67 controls chip formation to reduce material adhesion and improve evacuation, which helps to maintain consistent cutting conditions and better surface quality. How does the negative 0° geometry affect machining? A negative 0° geometry increases insert stability in the pocket and promotes secure clamping, which supports predictable cutting forces and improved repeatability in many milling operations. Which tool system is this insert designed for? The insert belongs to the Walter N‑grade system, ensuring compatibility with Walter milling toolholders and facilitating straightforward integration into tooling assemblies. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metal machining and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
XNGX1205ENN-F67 WHH15X Wendeplatten - Walter Tools
Combining the robust F67 chipbreaker with the wear-resistant WHH15X coated grade delivers consistent chip control and extended tool life for productive milling operations; order the insert directly via Metav Werkzeuge or consult our advisers for tailored application support XNGX1205ENN-F67 WHH15X milling indexable insert by Walter Tools — 0° negative rake, F67 chipbreaker XNGX1205ENN-F67 WHH15X is a precision milling insert designed for stable, repeatable cutting performance in a broad range of component machining tasks Negative rake 0° for robust engagement F67 chipbreaker for controlled chip flow 12 mm size, thickness code 05 Coated carbide grade WHH15X for wear resistance Precision and process reliability for productive milling The insert’s core advantage is predictable performance under load: the combination of a 0° negative rake and the F67 chipbreaker reduces the risk of workpiece vibration and erratic chip formation, which improves surface finish and cycle-time stability. For machining strategies that demand repeatability, this geometry supports secure cutting engagement and consistent material removal. The design is especially relevant where process reliability and throughput determine production cost per part, making the solution a rational choice for industrial milling applications Engineered geometry that simplifies setup and measurement With a nominal size of 12 mm and a thickness code 05, the component fits standard milling tool bodies while keeping setup straightforward. The insert is manufactured to tolerance class G, which ensures interchangeability and predictable seating in the toolholder; the result is reduced indexing time and fewer machine stops for corrective adjustment. The F67 chipbreaker is optimised to guide chips away from the cutting zone, lowering thermal load and decreasing the likelihood of re-cutting chips — a clear benefit when machining mixed batches or interrupted cuts Coated carbide grade and application guidance for longevity The cutting grade WHH15X is a coated carbide developed for balanced performance across a wide range of materials; it offers good wear resistance and stable edge retention for medium to high productivity machining. As with all cutting grades, material suitability should be checked against the specific product matrix to confirm optimal use cases. The insert’s construction and coating combination aim to extend tool life and reduce overall tooling costs, while the Walter Tools pedigree supports consistent manufacturing quality and availability Contact Metav Werkzeuge today for a customised recommendation on Walter Tools milling inserts and to discuss optimal grade selection — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: XNGX1205ENN-F67-WHH15X-WALTER Product designation: XNGX1205ENN-F67 WHH15X Product type: Fräswendeschneidplatte (milling indexable insert) Manufacturer: Walter Tools Series: Walter cutting grade – open series Grade: WHH15X Execution: X Tolerance class: G Facts Size: 12 Thickness code: 05 Rake angle: 0° (negative) Chipbreaker: F67 Special features Coated carbide cutting grade Material designation: Katalogabhängig Optimised chip control Stable cutting edge for repeatable performance FAQ What materials is this insert suitable for The XNGX1205ENN-F67 WHH15X insert is a coated carbide grade intended for a broad material spectrum; suitability should be verified against the product matrix for specific alloys and hardness ranges How does the F67 chipbreaker improve machining The F67 chipbreaker controls chip formation and evacuation, reducing heat concentration and lowering the risk of chip re-cutting during milling with the Walter Tools insert What does the 0° negative rake mean in practice A 0° negative rake provides a robust cutting edge that tolerates heavier engagement and intermittent cuts, improving tool life and process stability for demanding operations Is this insert compatible with standard toolholders The insert’s dimensions (12, thickness code 05) and tolerance class G ensure compatibility with corresponding toolholder systems designed for this form factor Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metal cutting and is part of the Swedish Sandvik group. Protected trademarks and product names are the property of their respective owners.
XNGX1205ENN-F67 WPM15G Wendeplatten - Walter Tools
Take advantage of the combination of robust chip control, extended tool life from the Tiger‑tec Gold coating and the stable 0° negative rake for consistent milling results. Order the insert directly via Metav Werkzeuge or ask the Metav consultants for application-specific advice. XNGX1205ENN-F67 WPM15G Fräswendeschneidplatte (Milling Insert) – Tiger‑tec Gold, F67 Chipbreaker (Walter Tools) A XNGX1205ENN-F67 WPM15G milling indexable insert designed for productive milling operations where controlled chips and long cutting edge life are required Tiger‑tec Gold coated for enhanced tool life F67 chipbreaker for controlled chip formation 0° negative rake for robust milling performance Plate size 12, thickness 05 for standard toolholders Improved productivity through coated carbide technology The combination of the Tiger‑tec Gold coating and the WPM15G cutting grade provides a clearly measurable benefit in machining cycles: longer tool life and greater process stability. The coated carbide substrate resists abrasive wear and helps maintain a stable cutting edge under intermittent cuts. For manufacturers seeking predictable downtime intervals and fewer insert changes, this grade supports higher productivity by reducing the frequency of reindexing and tool replacement. The statement about workpiece suitability remains product-matrix dependent and should be checked for specific materials. Consistent chip control and surface integrity The integrated F67 chipbreaker is designed to shape and evacuate chips reliably, reducing recutting and minimising heat concentration at the cutting zone. In practice this leads to a more consistent surface finish and less risk of built-up edge in batch production. The insert’s 0° negative rake contributes to a strong cutting geometry that withstands higher feed per tooth and interrupted cuts, supporting stable machining in demanding operations. For applications where chip evacuation and repeatable surface quality matter, the insert’s geometry yields tangible benefits. Simple integration and predictable handling in tool systems With a plate size 12 and thickness 05, this insert fits common milling toolholders and offers straightforward replacement behaviour, enabling smooth production routines and quick set-ups. The tolerance class G supports consistent seating accuracy in indexable pockets, which reduces vibration and protects the cutting edge. The insert is supplied in the X execution and bears the ISO designation XNGX1205ENN‑F67 WPM15G, making tool list management and reordering efficient for maintenance planners and purchasing departments. For application-specific recommendations on using the Tiger‑tec Gold WPM15G insert in a particular production setup, contact Metav Werkzeuge for consultancy and ordering — Metav Werkzeuge can advise on matching the insert to the machine, holder and workpiece. Technical data Article number: XNGX1205ENN-F67-WPM15G-WALTER SKU: XNGX1205ENN-F67-WPM15G-WALTER Item designation: XNGX1205ENN-F67 WPM15G Manufacturer: Walter Tools Facts Plate size: 12 Thickness: 05 Rake angle: 0° (negativ) Chipbreaker: F67 Tolerance class: G Special features Series: Tiger‑tec Gold Grade: WPM15G (coated carbide) Execution: X Sort description: coated hard metal; verify material suitability via product matrix FAQ What cutting grade is used for this insert and what does it mean? The insert uses the WPM15G grade, a coated carbide grade within the Tiger‑tec Gold family; it combines wear-resistant coating and carbide substrate properties to extend tool life under typical milling loads. How does the F67 chipbreaker affect production runs? The F67 chipbreaker promotes controlled chip formation and evacuation, which helps maintain consistent surface quality and reduces the chance of recutting, especially in medium to heavy milling operations. Is the insert geometry suitable for interrupted cuts? Yes, the 0° negative rake and robust cutting edge make the insert well suited for interrupted cuts and applications requiring strong edge stability. Where to check if this insert fits a specific workpiece material? Material suitability should be verified against the manufacturer’s product matrix for the WPM15G grade to ensure optimal performance for specific alloys and hardness ranges. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of Walter Tools.
XNGX1205ZNN-F67 WAK15 Wendeplatten - Walter Tools
Take advantage of a purpose-built, uncoated carbide grade that excels on aluminium and other non-ferrous metals; the combination of sharp cutting geometry and the F67 chipbreaker ensures consistent chip control and high productivity in series milling. Order directly through Metav Werkzeuge or request application advice from our consultants. XNGX1205ZNN-F67 WAK15 milling indexable insert — uncoated carbide, F67 chipbreaker (Walter Tools) The XNGX1205ZNN-F67 WAK15 is a milling indexable insert developed for efficient machining of aluminium and other non-ferrous metals, delivering stable chip formation and reliable edge life in high-productivity operations. Uncoated carbide grade WAK15 for non-ferrous metals F67 chipbreaker for reliable chip control 0° negative rake for stable cutting action 12 mm size, 0.5 mm thickness, tolerance class G High-efficiency machining for non-ferrous materials This insert is engineered around an uncoated carbide composition optimised for aluminium and similar materials. The cutting geometry provides a very sharp edge, which reduces built-up edge and minimises friction against soft alloys. As a consequence, cycle times are shortened and tool changes become less frequent, increasing overall throughput. The design supports stable chip formation, which reduces the risk of part marking and improves surface finish during continuous runs. Controlled chips and consistent process behaviour The integrated F67 chipbreaker offers predictable chip control under typical aluminium milling parameters. In practice this means fewer interruptions to clear swarf, more consistent coolant penetration and safer machining at moderate to high feed rates. The combination of chipbreaker and 0° negative rake contributes to a neutral cutting force balance, enhancing machine stability and allowing for reproducible results in serial production or mixed-batch work. System compatibility and practical benefits Belonging to the Walter N-grade system, the insert is available in the widely used XNGX1205ZNN-F67 format and fits common cutter bodies that accept this ISO designation. The grade WAK15 is uncoated and tailored for non-ferrous applications, making it suitable for demanding finishing and semi-finishing operations where edge sharpness and low adhesion are critical. The insert’s 12 mm size and 0.5 mm thickness provide a compact profile for close-tolerance work while maintaining sufficient edge strength for productive machining. Contact Metav Werkzeuge for application advice, cutter matching and stock information — Metav Werkzeuge can advise on optimal parameters for Walter Tools inserts and deliver practical support for implementation Technical data Article number: XNGX1205ZNN-F67-WAK15-WALTER ISO designation: XNGX1205ZNN-F67 WAK15 Internal code: XNGX1205ZNN-F67 Manufacturer: Walter Tools Core data Plate size: 12 mm Plate thickness: 0.5 mm Rake angle: 0° (negative) Tolerance class: G Special features Grade: WAK15 (uncoated carbide) Chipbreaker: F67 Series: Walter N-Sortensystem Application focus: aluminium and non-ferrous metals FAQ What materials is this insert intended for? The XNGX1205ZNN-F67 WAK15 insert is intended primarily for aluminium and other non-ferrous metals, offering reduced adhesion and good surface results on soft alloys. Is the grade coated or uncoated? The WAK15 grade is an uncoated carbide designed to provide a very sharp cutting edge for non-ferrous machining. How does the F67 chipbreaker affect machining? The F67 chipbreaker on this insert promotes controlled chip formation, reducing swarf issues and improving process stability during continuous milling of soft materials. Can this insert be used for finishing and semi-finishing? Yes, the combination of sharp geometry and the WAK15 grade makes the insert suitable for both finishing and semi-finishing operations on aluminium and similar materials. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (branded as Walter Tools) is part of the Sandvik Group and is a leading global manufacturer of precision tools for metalworking. Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanation only. The offered item is an original, factory-new product from the manufacturer.
XNGX1205ZNN-F67 WHH15X Wendeplatten - Walter Tools
Robust coated-carbide grade WHH15X combined with the F67 chipbreaker and a 0° (negative) relief angle delivers stable chip control and reliable edge life for demanding milling tasks; benefit from a compact 12 mm insert form and precise tolerance class G. Order the XNGX1205ZNN‑F67 WHH15X directly via Metav Werkzeuge or ask our consultants if needed. XNGX1205ZNN-F67 WHH15X milling indexable insert — F67 chipbreaker, WHH15X grade (Walter Tools) A durable XNGX1205ZNN‑F67 WHH15X indexable milling insert designed for productive milling with controlled chip formation and high process reliability Coated cemented-carbide grade WHH15X F67 chipbreaker for controlled chip formation Negative 0° relief angle for interrupted cuts 12 mm insert size, thickness code 05 Consistent chip control for higher process reliability The combination of the WHH15X coated cemented-carbide grade and the F67 chipbreaker provides consistently shaped chips and reduced risk of buildup at the cutting edge. This geometry supports steady material evacuation, which in turn reduces cycle variability and increases overall throughput. The insert’s negative 0° relief improves resistance to edge chipping during interrupted or heavy-cut conditions, offering a robust option for demanding milling operations. The design emphasises durability and repeatable results rather than ultra-fine finishing, making it a pragmatic choice where stability matters. Geometry and tolerances that simplify tool selection With a clear ISO designation and tolerance class G, the insert allows straightforward comparison and replacement within standard toolholder systems. The nominal 12 mm size and thickness code 05 give dimensionally compact results, permitting closer corner machining and reduced overhang in certain cutter bodies. While the coated carbide matrix aims to balance wear resistance and fracture toughness, suitability for specific workpiece materials should be checked against the manufacturer’s product matrix. This step ensures the selected grade and chipbreaker align with machining parameters and component requirements. Practical integration into production and inventory The standardised marking and ISO-style designation assist with ordering, stocking and process documentation. The XNGX1205ZNN‑F67 WHH15X insert is identified clearly for procurement and toolroom records, which supports traceability and reduces downtimes when replacements are needed. Maintenance regimes benefit from the insert’s predictable wear patterns, enabling scheduled indexing rather than ad‑hoc change‑outs. For technical clarifications or application-specific advice, the dealer can supply data sheets and help interpret the product matrix to match the insert’s capabilities to the machining task. Contact Metav Werkzeuge for application advice and to order the Walter Tools XNGX1205ZNN‑F67 WHH15X insert — experts are available at info@metav-werkzeuge.com or +49 2822 7131930 to support selection and supply Technical data Article number: XNGX1205ZNN-F67-WHH15X-WALTER Designation: XNGX1205ZNN-F67 WHH15X Manufacturer: Walter Tools Facts Insert size: 12 mm Thickness code: 05 Relief angle: 0° (negative) Tolerance class: G Special features Coating / substrate: Katalogabhängig Chipbreaker: F67 Grade / sort: WHH15X Series: Walter Schneidstoffsorte - Serie offen Execution: X FAQ What milling tasks suit this insert best? The XNGX1205ZNN‑F67 WHH15X insert is intended for productive milling where controlled chip formation and edge robustness are required; consult the Walter Tools matrix to confirm compatibility with specific workpiece materials. Can the WHH15X grade handle interrupted cuts? Yes, the WHH15X grade combined with a negative 0° relief angle improves resistance to edge chipping during interrupted or heavy cuts, making the insert suitable for such conditions. How does the F67 chipbreaker affect surface finish? The F67 chipbreaker promotes consistent chip control and stable cutting; for fine surface finishes, machining parameters and toolholder rigidity should be optimised in line with Walter Tools recommendations. Which dimensions should be recorded for reordering? Record the full ISO designation XNGX1205ZNN‑F67 WHH15X and the article number XNGX1205ZNN-F67-WHH15X-WALTER to ensure identical replacement inserts are supplied. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the brands named. The offered item is original and new from the manufacturer.
XNGX1205ZNN-F67 WPM15G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and the F67 chipbreaker for consistent chip control and dependable cutting-edge stability; order directly via Metav Werkzeuge or consult our specialists for precise selection and setup. XNGX1205ZNN-F67 WPM15G indexable milling insert — Tiger·tec Gold grade, F67 chipbreaker, Walter Tools XNGX1205ZNN-F67 WPM15G is an indexable milling insert designed for demanding production environments where reproducible cutting performance and predictable chip behaviour are required Tiger·tec Gold coated carbide grade WPM15G F67 chipbreaker for controlled chip formation 12 mm insert with 0° negative rake Robust cutting edge for extended tool life Reliable chip control for uninterrupted productivity The insert's F67 chipbreaker is engineered to provide predictable chip formation, which reduces the risk of entanglement and simplifies chip disposal in automated and manual setups. The controlled chips contribute to smoother material evacuation and can lower the incidence of machine stoppages caused by chip accumulation. Paired with the Tiger·tec Gold coating, the insert offers improved wear resistance, supporting longer intervals between tool changes and more consistent component quality. Robust geometry for heavy-duty and intermittent cuts Featuring a 0° negative rake, this geometry prioritises cutting-edge strength over shear efficiency, making it particularly suited to operations that demand resistance to impact, such as interrupted cuts or entry/exit phases. The coated carbide grade WPM15G combines a hard, wear-resistant surface with a tough substrate, balancing durability and fracture resistance. This results in reliable edge behaviour under a variety of cutting conditions while maintaining dimensional repeatability across long production runs. Compact format with straightforward handling and indexing The 12 mm dimension and 05 thickness identify a compact insert that fits tool systems designed for XNGX1205ZNN-F67-style cutters. Its standardised form factor enables rapid indexing when the cutting edge is renewed, reducing downtime during changeovers. Clear ISO designation and a consistent tolerance class support inventory management and permit fast identification of the correct insert for replacement or stocking purposes. Selection guidance and process optimisation Tool performance depends on the correct pairing of insert grade, geometry and cutting data with the workpiece material; the WPM15G grade belongs to the Tiger·tec Gold family, and material suitability should be verified against the manufacturer's product matrix. Trial cuts under representative conditions are recommended to establish optimal feeds and speeds. For precise process tuning, use recorded cutting data to refine parameters and secure the desired surface finish and productivity levels. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools Tiger·tec Gold WPM15G inserts and to arrange tailored cutting trials — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: XNGX1205ZNN-F67-WPM15G-WALTER Name: Fräswendeschneidplatte XNGX1205ZNN-F67 WPM15G Manufacturer: Walter Tools Facts Plate size: 12 Plate thickness: 05 Tolerance class: G Rake angle: 0° (negative) Special features Series: Tiger-tec Gold Grade: WPM15G (coated carbide) Chipbreaker: F67 Execution: X ISO designation: XNGX1205ZNN-F67 WPM15G FAQ What is the main benefit of the F67 chipbreaker? The F67 chipbreaker on the XNGX1205ZNN-F67 WPM15G insert promotes controlled chip formation, aiding chip evacuation and reducing the likelihood of build-up during machining. Which coating technology is used on this insert? The insert is produced in the Tiger·tec Gold coating technology, which improves wear resistance and supports longer tool life under demanding conditions. Is the 0° negative rake suitable for interrupted cuts? Yes. The 0° negative rake geometry strengthens the cutting edge, making it more resilient during interrupted or entry/exit cutting situations. How should material suitability be assessed? Material suitability for the WPM15G grade should be verified against the manufacturer's product matrix and validated with representative trial cuts to determine optimal cutting data. What designation helps with ordering the correct insert? Use the ISO designation XNGX1205ZNN-F67 WPM15G and the article number XNGX1205ZNN-F67-WPM15G-WALTER to ensure correct identification. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; Walter Tools is a brand of Walter Deutschland GmbH. Trademarked names and product designations are the property of their respective owners. There is no affiliation between our company and the mentioned brands beyond the sale of original factory-new products of the manufacturer.
XNHF070508-D27 WKK25G Wendeplatten - Walter Tools
Take advantage of a high-performance carbide grade and the Tiger·tec Gold coating for stable chip formation and long tool life; the insert combines robust edge integrity with geometry tuned for abrasive cast-iron work. Order directly via Metav Werkzeuge or consult our application specialists for process optimisation. XNHF070508-D27 WKK25G indexable milling insert for cast iron, Tiger·tec Gold – Walter Tools A XNHF070508-D27 WKK25G indexable milling insert designed for efficient machining of cast iron components, combining a coated carbide grade with a proven chipbreaker geometry for industrial milling operations Tiger·tec Gold coated carbide for wear resistance Optimised for abrasive cast-iron machining 0.8 mm corner radius for stable cutting edge Chipbreaker D27 for controlled chip formation Durable grade optimised for cast-iron machining The WKK25G grade within the Tiger·tec Gold family delivers coated carbide performance tailored to the abrasive nature of cast iron. The coating reduces flank and crater wear under typical grey and nodular cast-iron conditions, which leads to longer component runs and fewer tool changes. For production environments that require dependable cycle times, this grade offers a balanced combination of hardness and fracture resistance: the result is improved process stability and predictable insert life. The explanation of "coated carbide": a thin, engineered layer bonded to a cemented carbide substrate that enhances heat resistance and reduces abrasive wear during intermittent or continuous milling. Geometry and chip control that reduces rework Precise geometry enables the insert to manage frequently short, breaking chips typical of cast-iron materials. The integrated chipbreaker D27 and a 0.8 mm corner radius ensure consistent chip segmentation and a robust cutting edge, while the 0° negative rake contributes to shock resistance in interrupted cuts. These features translate to fewer built-up edges and a more consistent surface finish, reducing the need for rework. In practice, the specified corner radius and chipbreaker work together to maintain edge strength during heavy engagement, so operators observe more uniform component tolerances and extended indexable insert cycles. Process benefits and practical application guidance The insert is supplied in the standard industrial format 07 with thickness 05, making it compatible with indexable milling cutters specified for these plate codes. Classified for group K under ISO 513, the grade is explicitly intended for cast iron machining; this helps when selecting tooling assortments for mixed workshops. Using this insert in production supports higher uptime through reduced insert consumption and stable chip control. For shops transitioning from less abrasion-resistant grades, the Tiger·tec Gold series typically delivers better edge life and can support improved overall productivity without extensive parameter experimentation. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts or to arrange a materials suitability review by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data Article number: XNHF070508-D27-WKK25G-WALTER Name: XNHF070508-D27 WKK25G Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Free angle / rake: 0° (negative) Format: 07 Thickness code: 05 Tolerance class: H Special features Series: Tiger·tec Gold Grade: WKK25G Chipbreaker: D27 Material code: K (suitable for cast iron) Execution: F Coated cemented carbide FAQ Which materials is this insert intended for? The grade WKK25G in the XNHF070508-D27 WKK25G insert is engineered primarily for cast iron (material group K under ISO 513), offering wear resistance and chip control suited to abrasive cast-iron machining. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold on this insert improves heat and wear resistance, which extends the cutting life of the XNHF070508-D27 WKK25G and stabilises performance during long production runs in cast iron. What do the codes XNHF070508-D27 and D27 indicate? The designation XNHF070508-D27 identifies the insert geometry and size series (format 07, thickness 05) while D27 specifies the chipbreaker style designed for controlled chip formation. Is the insert suitable for interrupted cuts or heavy engagement? Yes, the negative 0° rake and robust WKK25G grade provide shock resistance and maintain edge integrity under interrupted cutting typical in milling cast-iron components. Can this insert be used for steel or stainless applications? The data for this insert indicates suitability for cast iron (K); no specifications for steel or rostfreier Stahl are provided for this grade, so alternate grades should be selected for those materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
XNHF070508-D57 WKK25G WKK25G Wendeplatten - Walter Tools
The combination of the Tiger·tec Gold coating, the WKK25G grade and the optimised D57 chipbreaker ensures stable, repeatable milling of cast iron with long tool life and reliable chip control; order this insert directly via Metav Werkzeuge or consult the technical team for application support. XNHF070508-D57 WKK25G — Indexable milling insert (Tiger·tec Gold) for cast iron — Walter Tools XNHF070508-D57 WKK25G is an indexable milling insert designed for productive cast iron machining with a negative 0° rake and an optimised chipbreaker Tiger·tec Gold coating for extended tool life Optimised for cast iron machining Negative 0° rake for stable cutting 0.8 mm corner radius for consistent edge strength Stable chip control for abrasive cast iron The insert from the Tiger·tec Gold series delivers reliable chip control when machining cast iron. The D57 chipbreaker was developed to handle the typically short, breaking chips of cast iron, reducing the risk of re-cutting and machine downtime. With a dedicated grade for abrasive materials, the cutting geometry promotes repeatable chip formation and helps maintain consistent surface quality over longer tool cycles. This leads to fewer interruptions in the production flow and improved process efficiency. Durable coating and grade for longer tool life The coated carbide grade WKK25G in the Tiger·tec Gold range is engineered for the abrasive wear patterns of cast iron. The coating enhances resistance to flank and crater wear, which extends service intervals and supports higher metal removal rates. The combination of coating technology and a robust substrate reduces the frequency of insert changes, contributing to higher overall productivity and lower cost per component in series production. Geometry that secures cutting stability and accuracy A negative 0° rake and a 0.8 mm corner radius provide mechanical strength at the cutting edge, making the insert particularly suitable for interrupted cuts and heavy engagement conditions. The thicker geometry of the insert improves vibration damping and edge retention, which is beneficial for precision milling tasks where dimensional stability and surface finish are important. These design choices support process security and repeatable results across batches. Application focus and process integration Selected for cast iron (ISO group K), the insert is optimised for abrasive materials and the characteristic chip behaviour of grey and nodular cast irons. Integration into existing toolholders is straightforward thanks to the standard ISO designation, and the insert’s predictable performance simplifies tool selection for planners and shopfloor engineers. The result is a more streamlined production setup with fewer experimental trials and quicker ramp-up to full productivity. Contact Metav Werkzeuge for availability and application advice on the Walter Tools XNHF070508-D57 WKK25G insert; technical consultation and tailored recommendations are available from Metav Werkzeuge’s specialists. Technical data SKU: XNHF070508-D57-WKK25G-WALTER Type: Indexable milling insert ISO designation: XNHF070508-D57 WKK25G Grade: WKK25G Series: Tiger·tec Gold Manufacturer: Walter Tools Facts Plate size: 07 Plate thickness: 05 Corner radius: 0.8 mm Rake angle: 0° (negative) Chipbreaker: D57 Tolerance class: H Special features Coated carbide grade optimised for cast iron Suitable for cast iron (ISO group K) Designed for abrasive wear resistance and short breaking chips Robust geometry for interrupted cuts and stable cutting FAQ What materials is this insert intended for? The XNHF070508-D57 WKK25G insert is intended primarily for cast iron (ISO group K) applications and is optimised for the abrasive wear and short breaking chips typical of these materials. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WKK25G grade improves wear resistance and thermal stability, which extends tool life and supports higher metal removal rates during cast iron milling. Is this insert suitable for interrupted cuts? Yes; the negative 0° rake and the 0.8 mm corner radius give the insert enhanced edge strength, making it suitable for interrupted cutting conditions and heavy engagement scenarios. Which chipbreaker is used and what is its effect? The D57 chipbreaker is specified for this insert and is optimised to produce short, controlled chips when machining cast iron, reducing re-cutting and improving process stability. Can the insert be used in standard ISO toolholders? The insert follows standard ISO designation practice for indexable milling inserts, allowing straightforward integration into compatible toolholders and machine setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
XNHF070508-D57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of durable coated carbide, precise chip control and stable cutting geometry for reliable high‑volume milling; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. Milling indexable insert XNHF070508-D57 WKP35S (Tiger‑tec Silver) by Walter Tools The XNHF070508-D57 WKP35S is a negative‑rake milling insert designed for productive machining of steel and cast iron in industrial milling applications. Tiger‑tec Silver coating for wear resistance Optimised for steel and cast iron machining 0° negative rake for stable cutting performance 0.8 mm corner radius for edge strength D57 chipbreaker for reliable chip control Consistent productivity through coated carbide technology The insert is manufactured in the WKP35S grade and benefits from Tiger‑tec Silver coating technology, which delivers a combination of thermal stability and wear resistance. This coated carbide formulation promotes longer tool life under the cyclic temperatures typical of steel and cast iron milling, reducing downtime for tool changes. The 0° negative rake geometry contributes to a predictable cutting force, which stabilises the machining process and helps maintain dimensional accuracy across repetitive cycles. Precise chip control and process stability for safer runs Chip formation is guided by the D57 chipbreaker and the insert’s negative rake geometry, producing short, controllable chips when machining both steel and cast iron. The 0.8 mm corner radius increases edge strength and resists chipping during interrupted cuts or when encountering varying material hardness. Together these features lower the risk of unexpected tool failure, support consistent surface finish and contribute to a measurable reduction in scrap rates in production environments. Practical selection and integration advice for machining operations Selection of the right insert grade and geometry is critical for a stable process: the WKP35S grade is optimised for typical steel and cast iron applications and is therefore appropriate for general‑purpose milling where a balance of wear resistance and fracture toughness is required. When pairing with toolholders, ensure correct seat and clamping for negative‑rake inserts and verify cutting parameters using the machine’s power curve—this insert performs best at application‑appropriate feeds and speeds to exploit the Tiger‑tec Silver coating advantages while maintaining tool life. For reliable supply and application support of Walter Tools Tiger‑tec Silver inserts, contact Metav Werkzeuge for tailored advice and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: XNHF070508-D57-WKP35S-WALTER Product type: Milling indexable insert Grade: WKP35S Facts Coating: Tiger‑tec Silver Suitable materials: Steel (P), Cast iron (K) Free rake angle: 0° (negative) Corner radius: 0.8 mm Chipbreaker: D57 Plate size: 07 Plate thickness: 05 Tolerance class: H Designation: XNHF070508-D57 Special features Coated carbide construction Balanced wear resistance and toughness Designed for industrial milling operations Stable cutting edge for interrupted cuts Series: Tiger‑tec Silver FAQ What materials is this insert intended to machine? The XNHF070508-D57 WKP35S insert is specified for machining steel and cast iron, matching the WKP35S grade characteristics and Tiger‑tec Silver coating. How does the 0° negative rake affect performance? A 0° negative rake offers increased cutting edge strength and process stability; the geometry of this Walter Tools milling insert supports steady machining under load. What advantage does the D57 chipbreaker provide? The D57 chipbreaker promotes short, controlled chips when milling steel and cast iron, improving chip evacuation and reducing the chance of re-cutting swarf. Is the 0.8 mm corner radius suitable for roughing? Yes, the 0.8 mm corner radius enhances edge durability and is well suited for heavier cuts and intermittent milling typical of roughing operations. Which series does this insert belong to and why is that important? This insert is part of the Tiger‑tec Silver series; the series designation indicates a coating and substrate pairing engineered for reliable wear resistance and broad application across steels and cast irons. Walter Tools: The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are cited for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
XNHF070508-D67 WAK15 Wendeplatten - Walter Tools
Take advantage of the combination of a sharp, uncoated carbide grade for non‑ferrous machining and a fine 0.8 mm corner radius for consistent surface quality; order the insert directly via Metav Werkzeuge or consult our specialists for tailored application advice. XNHF070508-D67 WAK15 milling indexable insert — WAK15 grade for aluminium machining, Walter Tools A XNHF070508-D67 WAK15 milling insert designed for high‑performance machining of aluminium and other non‑ferrous metals, optimised for precise finishing and reliable chip control. WAK15 uncoated carbide for aluminium machining Fine 0.8 mm corner radius for improved surface finish Chipbreaker D67 for controlled swarf evacuation 0° negative free angle for stable cutting action Precision surface results for aluminium and non‑ferrous metals The insert combines a sharp, uncoated carbide grade with an edge geometry tailored to non‑ferrous materials, delivering reproducible surface quality when milling aluminium and similar alloys. The WAK15 grade is specifically designed to avoid material adhesion and to maintain a sharp cutting edge for long intervals, which translates into fewer interruptions and more consistent part tolerances. For users less familiar with carbide grades: uncoated grades offer excellent edge definition and are often preferred where high thermal conductivity of the workpiece and low cutting forces reduce the need for coatings. Geometry engineered for stable cutting and reliable chip control The cutting geometry features a 0° negative free angle and a chipbreaker D67, which together balance cutting stability and swarf management. A negative free angle increases edge strength and reduces vibration under interrupted cuts, while the D67 chipbreaker directs chips away from the cutting zone, improving tool life and machine uptime. The 0.8 mm corner radius helps to distribute cutting forces across the edge, reducing micro‑chipping and supporting a finer surface finish on demanding components. Practical deployment and tooling recommendations When integrating this insert into a production cell, pair it with a rigid, high‑precision milling cutter and appropriate feed rates for aluminium alloys to exploit the Walter N‑Grade system benefits. The insert’s dimensions and tolerance class support repeatable mounting and predictable performance. For finishing passes, the fine corner radius and sharp grade favour lower cutting forces and improved aesthetics; for more aggressive stock removal, consider adjusting depth of cut and feed to preserve edge life while maintaining throughput. For tailored recommendations or to secure availability of Walter Tools' XNHF070508‑D67 WAK15 milling insert, contact Metav Werkzeuge for application advice and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: XNHF070508-D67-WAK15-WALTER SKU: XNHF070508-D67-WAK15-WALTER Designation: XNHF070508-D67 WAK15 Manufacturer: Walter Tools Facts Free angle: 0° (negativ) Corner radius: 0.8 Plate size: 07 Plate thickness: 05 Tolerance class: H Special features Grade: WAK15 (uncoated carbide) Series: Walter N‑Grade system Chipbreaker: D67 Execution: F Material application: Aluminium and non‑ferrous metals (N) FAQ What materials is this insert suited to? The XNHF070508‑D67 WAK15 insert is intended for aluminium and other non‑ferrous metals, as the WAK15 grade and geometry minimise material adhesion and promote clean chip formation. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius spreads cutting forces over a larger edge, enhancing edge strength and improving surface finish while reducing the risk of small edge chipping during finishing operations. What is the role of the D67 chipbreaker? The D67 chipbreaker controls swarf shape and evacuation, reducing recutting and helping to maintain stable cutting conditions, which supports higher productivity and longer tool life. Is the insert coated or uncoated, and why does that matter? This insert uses an uncoated carbide grade (WAK15); uncoated grades are chosen for their sharp edges and low tendency to pick up non‑ferrous material, making them well suited to aluminium machining. Which tolerance class is specified and why is it important? The insert is supplied in tolerance class H, ensuring consistent dimensions for repeatable mounting and accurate machining results. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XNHF070508-D67 WKP25S Wendeplatten - Walter Tools
High process reliability and consistent chip control combine to deliver productive machining cycles; the Tiger·tec Silver WKP25S grade extends tool life while maintaining surface quality. For machining steel and cast iron, the negative 0° rake and 0.8 mm corner radius provide stable cutting behaviour and wear resistance. Order or consult via Metav Werkzeuge for application-specific advice. XNHF070508-D67 WKP25S milling insert — for steel and cast iron (Walter Tools) A robust milling insert in the Tiger·tec Silver range designed for productive machining of steel and cast iron, offering a coated-carbide grade optimised for reliable chip control and extended tool life Tiger·tec Silver coating for long life Optimised for steel and cast iron Negative 0° rake for stable cutting 0.8 mm corner radius for robust edges Reliable productivity from the coating and grade The core advantage of the Tiger·tec Silver series is its coating technology, which enhances thermal stability and reduces abrasive wear during heavy-duty cuts. The WKP25S grade is a coated carbide formulation tailored for the cutting conditions typical of steel and cast iron. This results in more consistent cutting forces, fewer unplanned tool changes and a noticeable improvement in machining uptime. For operations seeking repeatable surface quality and reduced tool consumption, the coating-grade combination supports efficient cycle times and predictable tool life. Stable geometry for consistent results Geometry parameters such as the negative 0° rake, the 0.8 mm corner radius and the D67 chipbreaker are engineered to deliver robust performance in interrupted cuts and mixed-operation milling. A negative rake increases edge strength, reducing the risk of chipping under heavy loads, while the rounded corner radius balances edge durability with acceptable surface finish. The D67 chipbreaker promotes short, controlled chip formation in both long and short-chipping scenarios, easing chip evacuation and improving process security on medium- to high-strength materials. Practical benefits for production workflows Choosing this insert supports streamlined tool management: the standardised designation and tolerance class H simplify inventory pairing, and the plate size 07 with thickness 05 fits common cutter pockets for flexible tool set-ups. The grade’s suitability for ISO groups P and K (representing steel and cast iron) makes it a versatile option across mixed-production environments. Operators and process engineers benefit from reduced rework, improved surface integrity and fewer tool interventions, which together contribute to lower unit costs and more predictable manufacturing output. For tailored recommendations on integrating the Walter Tools Tiger·tec Silver WKP25S inserts into existing toolholders and programmes, contact Metav Werkzeuge for expert application support: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: XNHF070508-D67-WKP25S-WALTER Designation: XNHF070508-D67 WKP25S Series: Tiger-tec Silver Grade: WKP25S Manufacturer: Walter Tools Facts Plate size: 07 Plate thickness: 05 Corner radius: 0.8 mm Rake angle: 0° (negative) Chipbreaker: D67 Tolerance class: H Execution: F Special features Coated carbide cutting material Suitable for steel (P) and cast iron (K) Optimised chip control Robust edge for interrupted cuts Series and grade optimised for industrial milling FAQ What materials is this insert intended for? The Tiger·tec Silver WKP25S grade is designed for machining steel (ISO P) and cast iron (ISO K), offering balanced wear resistance for both material families. How does the D67 chipbreaker affect chip formation? The D67 chipbreaker produces short, controllable chips under typical milling conditions, improving evacuation and reducing the risk of chip-related surface damage when using the XNHF070508-D67 WKP25S insert. Is the negative 0° rake suitable for interrupted cuts? Yes, the negative 0° rake increases edge strength and helps prevent chipping during interrupted milling, making the insert suitable for heavy engagement and roughing operations. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XNHF0705ANN-D27 WKK25G Wendeplatten - Walter Tools
High wear resistance from the Tiger·tec Gold coating combined with a D27 chipbreaker and a robust 0° negative clearance delivers repeatable tool life and controlled chip formation for cast iron applications; order the insert via Metav Werkzeuge or consult their specialists for process recommendations. XNHF0705ANN-D27 WKK25G milling insert – Tiger·tec Gold, for cast iron | Walter Tools XNHF0705ANN-D27 WKK25G is a negative‑rake milling insert designed for productive cast iron machining Tiger·tec Gold coating for high wear resistance Optimised for cast iron (ISO group K) 0° negative clearance for robust cutting D27 chipbreaker for reliable chip control Longer tool life through optimised coating and geometry The Tiger·tec Gold coating in this indexable insert provides high wear resistance and thermal stability, which translates into extended, predictable tool life in abrasive cast iron machining. The combination of a coated carbide substrate and a negative‑rake geometry ensures resistance to edge chipping and micro‑fracture under interrupted cuts. The design is particularly suitable for operations where stable performance and reduced tool change frequency contribute directly to lower cycle times and improved process efficiency. Stable chip control and consistent surface results With the integrated D27 chipbreaker, the insert produces short, controllable chips typical for grey and nodular cast irons, reducing chip entanglement and improving evacuation in high‑feed milling. Controlled chip formation supports a more consistent cutting force and therefore a steadier surface finish, even in cyclic or interrupted cuts. The insert’s geometry is tailored to handle the brittle chip behaviour of cast iron, enabling reliable results without complex parameter adjustments. Practical integration, dimensional clarity and repeatable accuracy Manufactured to tolerance class H, the insert in size 07 with a thickness of 05 fits standard milling toolholders and clamping systems, ensuring repeatable seating and minimal setup variation. The 0° negative clearance and execution designation F deliver a robust cutting edge for heavy engagement, while the coated carbide substrate offers thermal and mechanical resilience. Technical data such as chipbreaker D27 and the WKK25G grade facilitate straightforward selection for cast iron applications under ISO 513 categorisation. Contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss how Walter Tools Tiger·tec Gold inserts can boost cast iron productivity and tool life Technical data SKU: XNHF0705ANN-D27-WKK25G-WALTER Article designation: XNHF0705ANN-D27 WKK25G Product type: Milling insert Brand: Walter Tools Series: Tiger·tec Gold Grade: WKK25G Core specifications Plate size: 07 Thickness: 05 Clearance angle: 0° (negative) Chipbreaker: D27 Tolerance class: H Special features and suitability Coating: Tiger·tec Gold Substrate: coated carbide Material suitability: cast iron (ISO group K) Execution: F Typical applications: productive milling of cast iron components FAQ What materials is this insert intended for? The XNHF0705ANN-D27 WKK25G milling insert from Walter Tools is optimised for cast iron (ISO group K) and designed to handle the abrasive and fragmenting chip behaviour typical of those materials. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold on the WKK25G grade increases wear resistance and thermal stability, which helps to extend cutting edge life and maintain process stability during extended milling cycles. What chip control can be expected with the D27 chipbreaker? The D27 chipbreaker on this insert promotes short, controlled chips in cast iron milling, improving chip evacuation and reducing the risk of re-cutting or entanglement. Is the insert suitable for heavy interrupted cuts? Yes, the 0° negative clearance and robust coated carbide substrate make the insert resistant to edge chipping and suitable for heavier engagements typical of interrupted milling in cast iron. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not imply any affiliation with our company. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
XNHF0705ANN-D27 WKP25S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger‑tec Silver coating and the WKP25S grade for high productivity and stable chip control in steel and cast‑iron milling; order via Metav Werkzeuge or contact the sales team for application advice. XNHF0705ANN-D27 WKP25S milling insert — Tiger‑tec Silver, for steel and cast iron (Walter Tools) The XNHF0705ANN-D27 WKP25S is a coated carbide milling insert engineered for robust, productive machining of steel and cast iron in demanding industrial applications. Tiger‑tec Silver coating for improved wear resistance Grade WKP25S optimised for steel and cast iron 0° negative rake for robust milling performance D27 chipbreaker for controlled chip formation Greater productivity through wear‑resistant coating and grade selection The combination of the Tiger‑tec Silver coating with the WKP25S carbide grade delivers a measurable increase in productivity by reducing flank wear and extending tool life. Designed as a coated carbide insert, it resists abrasive and adhesive wear mechanisms typical in machining steel and cast iron, which reduces downtime for tool changes. The surface treatment enhances heat resistance during continuous cutting, enabling higher cutting speeds where process conditions permit, and supports consistent dimensional output over extended production runs. Reliable chip control and robust cutting geometry for secure machining A 0° negative rake geometry together with the D27 chipbreaker stabilises chip formation and evacuation, which is particularly beneficial when machining interrupted cuts or heterogeneous cast‑iron microstructures. Controlled chip formation reduces the risk of chip entanglement and workpiece damage, leading to fewer interruptions and improved surface quality. The insert geometry therefore supports robust milling strategies and enhances process security in both roughing and semi‑finishing operations. Precise fit and repeatability for efficient tool handling With size 07 and thickness 05, produced to tolerance class H, this insert ensures predictable seating and repeatable cutting positions in compatible toolholders. The standardised dimensions simplify tool preparation and replacement, lowering setup time and helping maintain consistent cutting conditions across shifts. The execution marked as F and the insert designation ensure compatibility with established clamping systems, contributing to reliable cycle times and easier inventory handling for production planners. For application advice on Walter Tools Tiger‑tec Silver inserts or to confirm suitability for specific steel or cast‑iron operations, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — specialist support and ordering are available through Metav Werkzeuge Technical data SKU: XNHF0705ANN-D27-WKP25S-WALTER Designation: XNHF0705ANN-D27 WKP25S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKP25S Core measurements Insert size: 07 Thickness: 05 Relief angle: 0° (negative) Chipbreaker: D27 Tolerance class: H Applications & features Material suitability: P / K (steel and cast iron) Construction: Coated carbide grade (Tiger‑tec Silver) Execution: F Stable chip formation; productive machining FAQ What materials is this insert suitable for? The XNHF0705ANN-D27 WKP25S milling insert from Walter Tools is specified for machining P and K class materials, i.e. a range of steel and cast iron applications. How does the Tiger‑tec Silver coating benefit production? The Tiger‑tec Silver coating on this insert improves wear resistance and heat tolerance, which extends cutting life and supports consistent performance in longer production cycles. Is the D27 chipbreaker suitable for interrupted cuts? Yes, the D27 chipbreaker is designed to produce controlled chips and is effective in interrupted cutting where chip control and evacuation are critical to process stability. Can this insert be used for semi‑finishing operations? The geometry and grade WKP25S permit use in semi‑finishing strategies, combining robust cutting with acceptable surface quality when parameterised appropriately. What does the tolerance class H mean for toolholders? Tolerance class H indicates tight dimensional accuracy for repeatable seating and consistent cutting positions, reducing variability during insert changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
XNHF0705ANN-D57 WKK25G WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance, targeted adaptation for cast iron and the controlled chip geometry for reliable, productive milling — order directly via Metav Werkzeuge or consult the team for application advice. XNHF0705ANN-D57 WKK25G milling insert, Tiger‑tec Gold coating, for cast iron, Walter Tools the XNHF0705ANN-D57 WKK25G is a coated milling insert designed for productive machining of cast iron components Tiger·tec Gold coating Optimised for cast iron Negative rake 0° for robust cutting D57 chipbreaker for controlled chips High wear resistance for abrasive cast‑iron work The XNHF0705ANN-D57 WKK25G is engineered around the Tiger‑tec Gold coating and a coated carbide substrate to resist the abrasive wear typical of cast‑iron machining. This combination reduces flank wear and extends tool life, which in turn lowers tooling costs per part and increases uptime on production lines. The grade is tailored to brittle, short‑chip behaviour, so the coating and substrate work together to maintain a stable cutting edge under interrupted cuts and varying thermal loads. For manufacturers focused on predictable cycle times, this means fewer insert changes and more consistent output. Predictable chip control and process security The D57 chipbreaker and a negative rake 0° geometry deliver controlled, short chips that are easier to evacuate from the cut, reducing the risk of recutting and improving surface integrity. The insert’s geometry supports steady cutting forces, enhancing machining stability when working with irregular cast surfaces. Thanks to the tolerance H classification and standardised form factor, repeatability in indexing and clamping is ensured, which simplifies tool management and minimises setup variations across multiple machines. Practical selection and operational benefits for workshops Designed in a compact 07 plate size with a 05 thickness and executed as type F, this indexable insert fits common cutter bodies and supports fast inventory rotation. The WKK25G grade is indicated specifically for the K material group (cast iron), offering an application‑focused solution without over‑specifying for other materials. For production planners, the result is a targeted tooling choice that reduces the need for broad, costly tool assortments while providing a robust solution for abrasive cast components and short‑run variability. Contact Metav Werkzeuge today to discuss Walter Tools Tiger‑tec Gold inserts and ensure the XNHF0705ANN-D57 WKK25G is matched to production requirements; Metav Werkzeuge can provide technical advice and fast delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: XNHF0705ANN-D57-WKK25G-WALTER Designation: XNHF0705ANN-D57 WKK25G Manufacturer: Walter Tools Product type: milling insert Facts Plate size: 07 Plate thickness: 05 Relief angle: 0° (negative) Tolerance class: H Special features Series: Tiger‑tec Gold Grade: WKK25G (coated carbide) Chipbreaker: D57 Type / execution: F Material group: optimised for cast iron (K) Properties: abrasion‑resistant coating, designed for short, breaking chips FAQ What materials is this insert suitable for? The XNHF0705ANN‑D57 WKK25G from Walter Tools is optimised for cast iron (material group K) and its grade and coating are selected to handle the abrasive wear typical of such materials. How does the D57 chipbreaker affect machining? The D57 chipbreaker produces short, controlled chips, which helps with chip evacuation and reduces the chance of recutting; this improves surface quality and process reliability when using the XNHF0705ANN‑D57 WKK25G insert. Is the 0° relief angle suitable for heavy interrupted cuts? Yes. The 0° negative rake delivers a robust cutting edge that tolerates interrupted cuts and varying load conditions commonly encountered in cast‑iron machining with this Walter Tools insert. Can this insert be used in standard cutter bodies? The insert’s 07 plate size and 05 thickness are compatible with common milling cutter bodies designed for this form; confirmation with the cutter manufacturer’s clamping specifications is recommended. What is the main benefit of the Tiger‑tec Gold coating? The Tiger‑tec Gold coating combines enhanced abrasion resistance with reliable edge stability, extending tool life and enabling consistent component finishes when machining cast iron. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only and to indicate compatibility; there is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
XNHF0705ANN-D57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP25S grade for consistent machining of steel and cast iron; the insert’s chipbreaker D57 and 0° negative rake ensure controlled chip formation and long tool life. Order directly via Metav Werkzeuge or consult our specialists for application support. XNHF0705ANN-D57 WKP25S indexable milling insert, Tiger‑tec Silver, for steel and cast iron — Walter Tools XNHF0705ANN-D57 WKP25S is an indexable milling insert designed for reliable finishing and semi‑roughing in steel and cast iron applications High wear resistance from Tiger‑tec Silver coating Designed for steel and cast iron machining Chipbreaker D57 for reliable chip control 0° negative rake for stable cutting forces High‑performance coating for consistent results The Tiger‑tec Silver coating combined with the WKP25S carbide grade delivers a balanced mix of wear resistance and toughness, optimised for the thermal and abrasive conditions encountered when machining steel and cast iron. This coating reduces flank wear and helps maintain surface finish, which translates into fewer rework cycles and a more predictable machining process. The result is a cost‑effective insert that supports sustained productivity in mixed‑material production runs. Geometry that stabilises chip behaviour and tool life With the integrated chipbreaker D57 and a 0° negative rake, the insert promotes controlled chip fragmentation and steady cutting forces. The geometry minimises vibration and supports stable tool engagement, which is particularly beneficial during interrupted cuts or when tolerances are tight. The tolerance class H and execution type F contribute to repeatable seating and indexing, reducing setup variability and enabling consistent component quality. Practical benefits for workshop and production environments Small but decisive features — such as the plate size 07 and plate thickness 05 — make this insert suitable for a wide range of tool holders and pocket designs without compromising stiffness. The combination of grade, coating and geometry provides an efficient compromise between tool life and cutting performance, shortening tool change intervals and increasing machine uptime. For tooling strategies that demand reliable performance across common ferrous materials, this insert offers an immediate process improvement. Contact Metav Werkzeuge for tailored cutting data and to specify Walter Tools Tiger‑tec Silver WKP25S inserts for intended applications; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and order processing Technical data Article number: XNHF0705ANN-D57-WKP25S-WALTER Product name: Fräswendeschneidplatte XNHF0705ANN-D57 WKP25S Manufacturer: Walter Tools Facts Plate size: 07 Plate thickness: 05 Free rake angle: 0° (negative) Tolerance class: H Special features Series: Tiger‑tec Silver Grade: WKP25S (coated carbide) Chipbreaker: D57 Execution: F Applicable materials: steel (P), cast iron (K) Product type: indexable milling insert FAQ What materials is this insert designed to machine? The XNHF0705ANN‑D57 WKP25S insert by Walter Tools is designed for machining steel (P) and cast iron (K), reflecting the grade and coating selection for those ISO groups. How does the chipbreaker D57 affect machining? The D57 chipbreaker on this insert promotes reliable chip control and fragmentation, improving surface finish and reducing the risk of chip entanglement during milling. What does the 0° negative rake mean for cutting performance? A 0° negative rake provides a robust cutting edge and stabilises cutting forces, which helps when working with interrupted cuts or abrasive materials common in steel and cast iron machining. Is the insert compatible with standard tool holders for size 07 plates? The plate size 07 and tolerance class H ensure consistent seating in compatible indexable milling holders designed for this format. Which series and coating technology is used on the insert? The insert is part of the Tiger‑tec Silver series with a coated carbide grade WKP25S, optimised for wear resistance and process stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original factory‑new goods of the manufacturer Walter Tools. The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group.
XNHF0705ANN-D67 WAK15 Wendeplatten - Walter Tools
Take advantage of the WAK15 uncoated carbide grade and the D67 chipbreaker for stable chip control when machining aluminium and other non‑ferrous metals; the negative 0° free angle provides a robust cutting geometry that supports repeatable results. Order directly via Metav Werkzeuge or consult their specialists for cutting parameters and insert recommendations. XNHF0705ANN-D67 WAK15 — Milling insert, uncoated carbide for aluminium (Walter Tools) The XNHF0705ANN-D67 WAK15 is a precision milling insert designed for efficient machining of aluminium and non‑ferrous metals, featuring the Walter N‑system geometry and a D67 chipbreaker for consistent chip control. Walter N‑system, WAK15 uncoated carbide Optimised for aluminium and non‑ferrous metals D67 chipbreaker for controlled chip formation Performance benefits from a grade tailored to non‑ferrous work The Walter N‑system insert uses the WAK15 uncoated carbide grade, a choice developed specifically for machining aluminium and other non‑ferrous materials. Because the grade is uncoated, the cutting edges can be produced with extremely fine geometry, which reduces adhesion and minimises material build‑up on the cutting edge. This results in a more consistent surface finish and less frequent edge dressing, translating into measurable productivity gains on light‑alloy components. Reliable chip management for continuous machining The D67 chipbreaker is integrated to deliver predictable chip formation during milling operations. With this feature, chips are broken and evacuated reliably, reducing the risk of entanglement and enabling longer uninterrupted cuts. Combined with the insert’s neutral/negative free angle (0° (negative)), the geometry favours a stable cutting edge under varying depths of cut, which supports process stability and repeatability on series production. System compatibility and practical advantages in the workshop As a member of the Walter N‑Sortensystem, the insert is compatible with established toolholders and clamping systems, facilitating straightforward integration into existing tool sets. The insert’s designation (size 07, thickness 05) and tolerance class H ensure dimensional accuracy for consistent seat and fit. These characteristics simplify tool management, reduce setup time and support predictable machining results across batches without extensive parameter adjustments. Contact Metav Werkzeuge for tailored advice on selecting Walter Tools inserts and to request cutting data for WAK15 when machining aluminium and other non‑ferrous materials Technical Data Article number: XNHF0705ANN-D67-WAK15-WALTER Designation: XNHF0705ANN-D67 WAK15 Product type: Fräswendeschneidplatte Facts Plate size: 07 Plate thickness: 05 Free angle: 0° (negative) Tolerance class: H Special features Series: Walter N‑Sortensystem Grade: WAK15 (uncoated carbide) Chipbreaker: D67 Execution: F Suitable for aluminium and non‑ferrous metals FAQ Which materials is this insert intended for? The XNHF0705ANN-D67 WAK15 insert from Walter Tools is intended primarily for aluminium and other non‑ferrous metals, offering geometry and grade properties that help prevent material adhesion. Is the insert coated, and what does that mean for aluminium machining? The WAK15 grade is uncoated carbide; this allows very sharp cutting edges and low friction geometries that reduce build‑up when machining light alloys, which can improve surface quality without relying on a coating. How does the D67 chipbreaker influence process reliability? The D67 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of chip entanglement and supporting longer continuous cuts with steady surface finish and less operator intervention. What significance does the 0° (negative) free angle have for milling? A 0° (negative) free angle offers a strong edge geometry that favours stability under varying cutting forces; it helps maintain edge integrity in interrupted cuts and when greater radial engagement is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
XNHF090612-D27 WKK25G WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WKK25G grade for reliable, wear-resistant machining of cast iron; the 0° negative relief and 1.2 mm corner radius deliver stable cutting and longer edge life. Order genuine Walter Tools inserts directly via Metav Werkzeuge or consult the Metav team for application advice. XNHF090612-D27 WKK25G milling insert — Tiger·tec Gold for cast iron (Walter Tools) The XNHF090612-D27 WKK25G is a coated carbide milling insert optimised for efficient and consistent machining of cast iron components. Tiger·tec Gold coating technology Grade WKK25G for cast iron 0° negative relief for stable cutting 1.2 mm corner radius for edge strength Consistent chip control for abrasive cast iron The Tiger·tec Gold WKK25G grade has been developed for the specific demands of cast iron machining, where abrasive wear and short, brittle chips are common. The coating and substrate combination provides high wear resistance and predictable wear behaviour, which reduces unplanned tool changes. By stabilising chip formation with the D27 chipbreaker geometry, the insert enables steady removal rates and comparable cycle times, so process planners can rely on consistent part tolerances in serial production. Strong cutting edge for fewer interruptions A 1.2 mm corner radius and a 0° negative relief geometry combine to produce a robust cutting edge that resists chipping under intermittent loads. This mechanical stability means fewer tool interventions and a lower risk of scrap from edge failure. The reinforced edge geometry is especially beneficial for interrupted cuts and short overhangs, providing improved service life while maintaining dimensional accuracy during longer shifts. Predictable surface finish and process security The coated substrate and precise geometry of the insert support a uniform surface quality even in demanding materials. With the coating process optimised for adhesion and thermal stability, the insert achieves consistent results across batches, promoting process reliability. For planners and machine operators, this translates into reduced measurement rework and more predictable downstream operations, enhancing overall manufacturing throughput. Easy integration into existing holders and workflows The insert designation and geometry (XNHF090612-D27, chipbreaker D27, size 09, thickness 06) match common Walter Tools milling systems, enabling straightforward replacement and minimal setup adjustments. Designed for the ISO group K (cast iron), the grade simplifies tool selection in mixed-material shops. If application-specific data are required, Metav Werkzeuge can provide further recommendations and compatibility checks to ensure optimal cutting parameters and fixture arrangements. Contact Metav Werkzeuge for tailored application advice and to secure genuine Walter Tools Tiger·tec Gold inserts for reliable cast iron machining Technical data Article number: XNHF090612-D27-WKK25G-WALTER Designation: XNHF090612-D27 WKK25G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WKK25G Application: Cast iron (ISO group K) Facts Corner radius: 1.2 mm Relief angle: 0° (negative) Insert size: 09 Insert thickness: 06 Chipbreaker: D27 Tolerance class: H Special features Coating technology: Tiger·tec Gold Substrate: coated carbide (Hartmetall, coated) Optimised for abrasive wear typical of cast iron Designed for short, breaking chips and stable chip formation FAQ Which materials is this insert suited for? The XNHF090612-D27 WKK25G milling insert (Walter Tools) is intended primarily for cast iron machining, matching the ISO group K designation. What does the WKK25G grade mean in practice? WKK25G is a Walter grade formulated as a coated carbide specifically for abrasive cast iron applications, offering wear resistance and stable performance under typical chip-breaking conditions. How does the 0° negative relief affect cutting? A 0° negative relief increases edge stability and supports interrupted cutting; in the XNHF090612-D27 insert, it contributes to longer edge life in demanding cast iron tasks. Can the insert be used in standard Walter milling holders? Yes, the geometry and designation are compatible with common Walter milling systems that accept the XNHF090612-D27 form factor and D27 chipbreaker. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating enhances thermal stability and wear resistance, which in the XNHF090612-D27 WKK25G results in consistent machining performance and fewer tool changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com