ADMT080302R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of consistent wear resistance, versatile material compatibility and a geometry engineered for stable chip control to increase productivity in milling operations; order directly via Metav Werkzeuge or consult our experts for application support. ADMT080302R-F56 WKP35S milling indexable insert — Parallelogram 85°, Tiger·tec Silver ADMT080302R-F56 WKP35S is a precision milling indexable insert designed for high-productivity finishing and semi-finishing in Stahl and Gusseisen applications. Tiger·tec Silver coating for reliable wear resistance WKP35S grade optimised for Stahl and Gusseisen Parallelogram 85° form with 15° clearance angle Corner radius 0.2 mm for consistent surface finish High-efficiency cutting performance that stabilises cycle times The insert offers a combination of a robust coated grade and a defined geometry to deliver predictable tool life and repeatable results. The WKP35S grade, part of the Tiger·tec Silver family, is formulated for the thermal and abrasive conditions typical of machining Stahl and Gusseisen; this results in improved process security and reduced unplanned tool changes. The parallelogram 85° shape and 15° clearance angle provide an effective balance between cutting edge strength and chip evacuation, enabling higher feed rates without sacrificing surface integrity. For production environments where throughput and consistency matter, this geometry supports a smoother production flow and more reliable cycle planning. Durable coating and edge control for consistent component quality A multilayer coating strategy in the Tiger·tec Silver technology enhances resistance to abrasive wear and thermal loading, helping to maintain a sharp cutting edge over longer lifetimes. The small corner radius (0.2 mm) is optimised for achieving fine surface finishes in finishing passes while still offering sufficient strength to withstand moderate interruptions. The integrated chipbreaker F56 promotes controlled chip formation and evacuation, which reduces the risk of chip re-cutting and surface defects. Together these features contribute to consistent part tolerance and surface quality, lowering downstream finishing costs and improving first-pass yield. Practical application benefits and operational guidance This insert is configured for flexible deployment in milling applications where Stahl and Gusseisen workpieces are common. The classification P / K reflects its suitability across those ISO material groups, so the same insert can cover a range of components without frequent tool changes. From a maintenance and inventory perspective, the standardised designation supports straightforward identification and replacement in tool carriers. For operators and process engineers, noting the grade and chipbreaker combination allows optimised selection of cutting parameters and coolant strategy to eke out extended life and predictable results. Technical consultation is available for cutting data recommendations tailored to machine power and workpiece geometry. For tailored cutting data and to source genuine Walter Tools inserts, contact Metav Werkzeuge for expert advice and availability. Technical Data Article number: ADMT080302R-F56-WKP35S-WALTER Designation: ADMT080302R-F56 WKP35S Series: Tiger-tec Silver Grade: WKP35S Form: Parallelogram 85° Chipbreaker: F56 Manufacturer: Walter Tools Facts Clearance angle: 15° Corner radius: 0.2 mm Plate size: 08 Plate thickness: 03 Tolerance class: M Special features Coating: Tiger·tec Silver Material suitability: Stahl Material suitability: Gusseisen Sortenbeschreibung: beschichtetes Hartmetall Baureihe: Tiger-tec Silver FAQ What materials is this insert intended for? The ADMT080302R-F56 WKP35S insert is specified for machining Stahl and Gusseisen, reflecting the P / K ISO grouping of the grade. Which grade and coating are used on this insert? This indexable insert uses the WKP35S grade within the Tiger·tec Silver coating family, chosen to balance thermal resistance and abrasive wear performance. How does the parallelogram 85° form affect milling operations? The parallelogram 85° form combined with a 15° clearance angle enhances edge stability and chip flow, improving process security during finishing and semi-finishing passes. Is the chipbreaker suitable for mixed operations? The F56 chipbreaker is designed for controlled chip formation across a range of feeds, supporting consistent surface quality in mixed Stahl and Gusseisen workloads. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, brand-new goods from the manufacturer (Walter Tools).
ADMT080302R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the WSM35G grade for consistently stable chip formation and extended edge life when machining stainless steels and heat‑resistant superalloys; order directly via Metav Werkzeuge or consult their specialists for application‑specific recommendations. ADMT080302R-F56 WSM35G — Parallelogram 85° milling indexable insert, Tiger‑tec Gold, Walter Tools ADMT080302R-F56 WSM35G is a Tiger‑tec Gold coated milling indexable insert engineered for reliable machining of stainless steels and heat‑resistant superalloys in demanding production environments Tiger‑tec Gold grade WSM35G Optimised for stainless steels (ISO M) Also for superalloys and titanium (ISO S) Parallelogram 85°, 15° relief angle High‑temperature performance for tough materials The WSM35G grade, part of the Tiger‑tec Gold series, combines a coated carbide substrate with a specialised coating to provide improved wear resistance and thermal stability when cutting difficult materials. For components where heat builds up at the cutting edge—typical of stainless steels and superalloys—this material pairing reduces flank wear and preserves cutting geometry, which helps maintain dimensional accuracy and surface finish over longer tool life spans. Geometry that secures chip control and repeatability The parallelogram 85° form and the specified chipbreaker F56 work together to produce predictable chip formation and evacuation in interrupted and continuous cuts. A 15° relief angle and a 0.2 mm corner radius balance edge strength with cutting finesse, allowing the insert to deliver consistent performance across a range of feed rates. These geometric choices translate into fewer unplanned tool changes and steadier cycle times on production lines. Productivity gains through stable edge life By favouring a coating and grade combination designed for adhesion resistance and thermal management, the insert supports higher process reliability and improved economy per cutting length. The coated carbide technology reduces the tendency to form built‑up edge on reactive materials, resulting in better surface integrity and less scrap. In practice, this can reduce downtime and help achieve predictable batch throughput in series production. Practical use and application tips This indexable insert is tailored to ISO groups M (stainless steels) and S (heat‑resistant superalloys and titanium). Selection of appropriate cutting data—moderate cutting speeds for stainless steels and adjusted feeds for titanium alloys—will leverage the WSM35G properties best. If further machining parameters or compatibility checks are required for specific component geometries or machines, Metav Werkzeuge’s technical advisers can provide cutting data and optimisation guidance. For production tasks that demand secure chip control and sustained edge stability, choose Walter Tools’ Tiger‑tec Gold inserts and contact Metav Werkzeuge for tailored machining advice and expedited supply arrangements Technical Data Article number: ADMT080302R-F56-WSM35G-WALTER Designation: ADMT080302R-F56 WSM35G Product type: milling indexable insert Manufacturer: Walter Tools Core specifications Size code: 08 Thickness code: 03 Relief angle: 15° Corner radius: 0.2 mm Shape: Parallelogram 85° Chipbreaker: F56 Tolerance class: M Features & suitability Series: Tiger‑tec Gold Grade: WSM35G (coated carbide) Applicable materials: ISO M (stainless steels); ISO S (superalloys, titanium) Stable chip formation High temperature resistance Execution: T FAQ Which materials is the ADMT080302R-F56 WSM35G suitable for? The ADMT080302R-F56 WSM35G insert from Walter Tools is intended for stainless steels (ISO M) and heat‑resistant superalloys and titanium (ISO S), offering improved chip control and edge stability in these groups. What are the key geometric specifications of the insert? This insert features a parallelogram 85° shape, a 15° relief angle and a 0.2 mm corner radius, with chip control provided by the F56 breaker to ensure consistent evacuation. What is the benefit of the F56 chipbreaker? The F56 chipbreaker is designed to promote short, controllable chips in difficult materials, reducing the risk of entanglement and improving process stability during milling operations. How does the Tiger‑tec Gold coating affect performance? The Tiger‑tec Gold coating increases wear resistance and thermal stability, which helps maintain edge integrity under elevated temperatures and reduces the frequency of insert changes. Is this insert better for roughing or finishing operations? Depending on insert geometry and cutting parameters, the ADMT080302R-F56 WSM35G can be applied for both finishing and semi‑finishing in stainless steels and superalloys; appropriate feeds and speeds should be selected to match the desired surface quality and tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners and are mentioned here for explanatory purposes only. There is no connection between our company and the named brands beyond the sale of original, brand‑new manufacturer products.
ADMT080302R-F56 WSM35S T Wendeplatten - Walter Tools
Maximise machining reliability by combining the Tiger·tec Silver coating with the WSM35S grade for stable cutting edges and improved chip control; order directly via Metav Werkzeuge or consult the technical advisers for application-specific recommendations. ADMT080302R-F56 WSM35S indexable milling insert for rostfreier Stahl & superalloys — Walter Tools ADMT080302R-F56 WSM35S is a parallelogram 85° indexable insert designed for heavy-duty and high-temperature materials, optimised for machining rostfreier Stahl and heat-resistant superalloys. Tiger·tec Silver coating technology Optimised for rostfreier Stahl machining Parallelogram 85° form for reliable engagement 15° relief and 0.2 mm corner radius High-performance grade and coating for consistent cutting The ADMT080302R-F56 WSM35S pairs the WSM35S coating grade with Tiger·tec Silver technology to reduce flank wear and support stable cutting edge behaviour under thermal stress. This engineered combination improves tool life when confronting tough, adhesive materials: the result is more predictable tool-change intervals and fewer interruptions in production. The coating and grade jointly promote controlled chip control, which lowers the risk of built-up edge and supports consistent part quality during medium to heavy cut applications. Geometry and chip control that stabilise the machining process The insert’s Parallelogram 85° geometry and F56 chipbreaker are specified to deliver repeatable engagement and reliable chip formation. A 15° relief reduces rubbing and heat generation at the cutting face, while the 0.2 mm corner radius balances edge strength with acceptable surface finish. These geometric choices translate directly into reduced downtime, fewer edge failures and improved first-pass yield in serial production—advantages that feed into a measurable improvement in process throughput. Application focus and integration into workshop routines Designed for the material groups S / M, this insert is especially effective on rostfreier Stahl and heat-resistant alloys where thermal resistance and edge stability are critical. As an indexable insert, it integrates with common milling toolholders and supports quick index changes to maintain cycle times. For workshops seeking process reliability when working with demanding materials, the combination of grade, coating and geometry offers a pragmatic solution that lowers scrap risk and enhances surface consistency without adding machining complexity. Contact Metav Werkzeuge for tailored application advice on the ADMT080302R-F56 WSM35S insert and to discuss optimal cutting parameters and tooling assemblies Technical data Article number: ADMT080302R-F56-WSM35S-WALTER Designation: ADMT080302R-F56 Product type: Indexable milling insert Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 0.2 mm Size: 08 Thickness: 03 Form: Parallelogram 85° Special features Series: Tiger·tec Silver Grade: WSM35S Chipbreaker: F56 Tolerance class: M Material groups: S / M Suitable for: rostfreier Stahl and heat-resistant superalloys Execution: T FAQ Is this insert suitable for rostfreier Stahl? Yes. The ADMT080302R-F56 WSM35S insert and its Tiger·tec Silver grade are specified for rostfreier Stahl and support stable chip formation when machining these materials. Which chipbreaker is fitted and what is its benefit? The insert uses the F56 chipbreaker, which is designed to promote controlled chip formation and reduce the risk of built-up edge in demanding cuts. What are the key geometry parameters to note? The insert features a parallelogram 85° form, a 15° relief angle and a 0.2 mm corner radius, optimised for balance between edge strength and surface finish. Can the insert be used for titanium or superalloys? Yes. The WSM35S grade and Tiger·tec Silver series are suitable for heat-resistant superalloys and titanium (material group S), offering thermal stability and edge robustness. How does the geometry influence tool life? The 15° relief and 0.2 mm corner radius reduce rubbing and distribute cutting forces, which helps maintain the integrity of the cutting edge and extends tool life under cyclic thermal loads. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; info@walter-tools.com Protected trademarks and product names are the property of their respective owners and are mentioned solely for explanation. There is no affiliation between Metav Werkzeuge and the trademark owners. The offered article is an original, factory-new product of the manufacturer.
ADMT080302R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, broad material applicability (P / M / S) and a stable parallelogram geometry for reliable, productive milling; order the ADMT080302R-F56 WSP45G directly via Metav Werkzeuge or consult our specialists for cutting data. ADMT080302R-F56 WSP45G – Milling insert, Tiger·tec Gold, Walter Tools The ADMT080302R-F56 WSP45G is a parallelogram 85° milling insert engineered for versatile face and shoulder milling of Stahl, rostfreier Stahl and high‑temperature alloys in industrial machining. Tiger·tec Gold PVD‑coated carbide Suitable for Stahl, rostfreier Stahl and high‑alloy S Parallelogram 85° geometry for stable milling 15° clearance and 0.2 mm corner radius Higher productivity through advanced coating and grade The combination of the Tiger·tec Gold coating and the WSP45G grade delivers improved thermal resistance and edge stability under typical milling loads. This PVD‑coated carbide is optimised for demanding cutting conditions, reducing flank wear and extending tool life which leads to longer uninterrupted production runs and fewer tool changes. The coating technology supports consistent chip formation and helps maintain surface quality when working with tougher materials. Broad material range for fewer tool changes Designed for the ISO groups P / M / S, this insert offers practical flexibility: P indicates suitability for unalloyed and alloyed Stahl, M denotes compatibility with rostfreier Stahl, and S covers heat‑resistant superalloys and Titan. Such versatility reduces the need for multiple tool families on the shop floor, simplifying inventory while ensuring process stability across a range of components. The grade’s toughness supports secure chip control and helps to prevent build‑up edge when machining sticky or heat‑sensitive workpieces. Geometry and edge design for consistent surface quality The parallelogram 85° shape, combined with a 15° clearance and a 0.2 mm corner radius, provides a robust cutting edge that resists chipping during interrupted cuts. The F56 chipbreaker encourages predictable chip flow for improved evacuation, which in turn reduces rework and downtime. With tolerance class M and execution T, the insert sits securely in the toolholder, delivering repeatable results and reliable run‑out behaviour—key for maintaining tight tolerances in serial production. Practical application guidance for process security For high‑productivity milling, the insert’s balance of edge stability and toughness permits increased feed rates while maintaining acceptable surface finish and tool life. In applications where thermal load and adhesion are critical—such as when machining rostfreier Stahl or superalloys—the coated grade supports stable cutting edges and consistent performance. For specific cutting speeds and feed recommendations, Metav Werkzeuge’s technical advisors can supply matching parameters to integrate the insert into existing machining cycles and tool assemblies. Contact Metav Werkzeuge for tailored cutting data and procurement: info@metav-werkzeuge.com | +49 2822 7131930 — discuss the ADMT080302R-F56 WSP45G to determine optimal feeds, speeds and toolholder configuration Technical data SKU: ADMT080302R-F56-WSP45G-WALTER Item designation: ADMT080302R-F56 WSP45G Label: Fräswendeschneidplatte ADMT080302R-F56 WSP45G Walter Tools Series: Tiger-tec Gold Manufacturer: Walter Tools Core specifications Relief angle: 15° Corner radius: 0.2 mm Insert size: 08 Thickness: 03 Shape: Parallelogram 85° Tolerance class: M Features Coating / grade: Tiger·tec Gold / WSP45G Chipbreaker: F56 Material groups: P / M / S Execution: T Type: Fräswendeschneidplatte FAQ What materials is the ADMT080302R-F56 WSP45G suitable for? The ADMT080302R-F56 WSP45G insert is specified for ISO groups P / M / S, meaning it is suitable for machining Stahl, rostfreier Stahl and heat‑resistant superalloys including Titan. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WSP45G grade enhances thermal resistance and edge life, allowing the ADMT080302R-F56 WSP45G to maintain cutting performance and surface quality under elevated cutting temperatures. How does the parallelogram 85° geometry affect milling? The parallelogram 85° form offers stable radial engagement and improved edge support, which helps to reduce vibration and deliver consistent surface finishes when milling shoulders and faces with the ADMT080302R-F56 WSP45G insert. Is the insert suitable for interrupted cuts and heavy engagement? Yes, the combination of the WSP45G grade, a 0.2 mm corner radius and the robust geometry provides resistance to chipping, making the ADMT080302R-F56 WSP45G well suited for interrupted cuts and demanding milling operations. Which chipbreaker should be selected for general milling with this insert? The ADMT080302R-F56 WSP45G is supplied with the F56 chipbreaker, which is optimised for controlled chip formation and reliable evacuation in a range of milling applications. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT080304L-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the proven combination of the Tiger·tec Gold coating and the WKP35G grade for efficient machining of steel and cast iron; the geometrical design with 15° clearance and a 0.4 mm corner radius supports stable chip formation and consistent surface quality. Order directly via Metav Werkzeuge or consult their advisors for tailored application advice. ADMT080304L-F56 WKP35G milling insert – Tiger·tec Gold, for steel and cast iron by Walter Tools The ADMT080304L-F56 WKP35G is a parallelogram 85° milling insert designed for productive finishing and roughing in steel and cast iron applications. Tiger·tec Gold coating for enhanced wear resistance WKP35G grade for steel and cast iron machining Parallelogram 85° form with 15° clearance 0.4 mm corner radius; chipbreaker F56 for stable chips Broad material coverage and durable coating for long tool life The insert’s Tiger·tec Gold technology and WKP35G grade combine to deliver a coated carbide construction optimised for the thermal and abrasive conditions encountered when machining steel and cast iron. Coated carbide means a hard substrate with engineered surface layers that reduce wear and improve edge stability; this results in longer tool life and lower tool-change frequency. For production environments where predictable tool life is essential, the coating and grade are selected to provide stable chip formation and resistance to flank wear, supporting higher machine utilisation and reduced process interruptions. Geometry and edge design that control chips and surface finish The insert’s parallelogram 85° form together with 15° clearance and a 0.4 mm corner radius is intended to balance cutting strength and surface integrity. The geometry channels chips effectively and reduces cutting forces during engagement, while the chipbreaker F56 promotes breakage into controllable segments, which eases evacuation and lessens re-cutting. These characteristics translate into improved component finish and reduced vibration in many milling operations. The design is particularly suitable where a compromise is needed between finishing quality and robust cutting performance. Productivity advantages and process reliability in daily use As an indexable insert, this design allows quick, repeatable insert changes and supports stable productivity across series production runs. The combination of grade and geometry is aimed at achieving productive machining with predictable tool behaviour, facilitating consistent cycle times and surface results. Walter Tools’ specifications for this family focus on reproducible performance across a broad range of cutting conditions, making the insert a practical choice where both reliability and flexibility are required. For further process optimisation or application-specific recommendations, Metav Werkzeuge can provide technical guidance and supply options. For process-stable machining with Walter Tools' Tiger·tec Gold inserts, contact Metav Werkzeuge for expert application advice and reliable supply. Technical data SKU: ADMT080304L-F56-WKP35G-WALTER Designation: ADMT080304L-F56 WKP35G Type: Milling indexable insert Manufacturer: Walter Tools Core data Clearance angle: 15° Corner radius: 0.4 mm Form: Parallelogram 85° Plate size: 08 Plate thickness: 03 Tolerance class: M Chipbreaker: F56 Special features Series: Tiger·tec Gold Grade: WKP35G (coated carbide) Applicable materials: Steel (P), Cast iron (K) Execution: T FAQ Which materials are best suited for this insert? The ADMT080304L-F56 WKP35G is specified for steel (P) and cast iron (K); the WKP35G grade and Tiger·tec Gold coating are selected to handle the thermal and abrasive demands of these materials. What is the purpose of the 0.4 mm corner radius? A 0.4 mm corner radius increases edge strength compared with sharper radii, improving tool life and offering a balance between surface finish and robustness in interrupted or heavy cuts. How does the chipbreaker affect machining performance? The chipbreaker F56 is designed to produce short, controllable chips during milling, which enhances evacuation, reduces recutting, and contributes to a more stable cutting process with improved surface results. Is this insert suitable for finishing and roughing operations? Yes, the combination of WKP35G and the insert geometry makes it adaptable for both finishing and moderate roughing, with adjustments to cutting parameters to match the required material removal and surface quality. Can the insert be used in standard tool holders for parallelogram inserts? The form is a parallelogram 85° design; compatibility depends on the tool holder system, so the specific holder geometry should be confirmed against the ADMT080304L-F56 WKP35G dimensions. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is original, factory-new goods of the manufacturer.
ADMT080304L-F56 WKP35S Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating, WKP35S grade and precise parallelogram 85° geometry delivers stable chip control and prolonged tool life, supporting continuous, productive milling of steel and cast iron; order the ADMT080304L-F56 WKP35S directly via Metav Werkzeuge or consult the technical advisors for application-specific guidance. ADMT080304L-F56 WKP35S milling insert — Tiger·tec Silver grade for steel and cast iron (Walter Tools) The ADMT080304L-F56 WKP35S is a parallelogram 85° milling insert with a 15° clearance angle, optimised for reliable machining of steel (P) and cast iron (K) Tiger·tec Silver coating for long tool life WKP35S grade for steel and cast iron Parallelogram 85° insert geometry 15° clearance angle with 0.4 mm nose radius Higher throughput through coating and grade synergy The combination of the Tiger·tec Silver coating and the WKP35S carbide grade is engineered to improve life under industrial conditions. The coating reduces abrasive wear while the grade manages heat and maintains edge stability during extended cycles, which translates into fewer tool changes and increased uptime. For production environments where repeatability and consistent component quality are crucial, this pairing supports higher material removal rates without sacrificing surface integrity. The chipformer F56 contributes to controlled chip shape, reducing recutting and stabilising machining forces for smoother cycle times. Consistent results from stable geometry and tolerances The parallelogram 85° shape with a 15° clearance angle and a 0.4 mm nose radius provides robust contact geometry for shoulder and face milling operations. The geometry distributes cutting forces predictably, helping to avoid vibration and minimise edge chipping in interrupted cuts. Tolerance class M ensures interchangeability and reliable seat fitting in indexable toolholders, which helps maintain repeatable positioning and surface finish across multiple inserts. These geometric features make the insert suited to setups where accuracy and repeatable tool performance are operational priorities. Broad material range with focused chip control Designed for ISO groups P (steel) and K (cast iron), this insert offers versatile application potential across common workshop and production materials. The built-in F56 chipbreaker is tuned to the chip behaviour typical of these groups, favouring short, manageable chips in cast iron and reliable chip formation in steels. This tailored chip control reduces cycle interruptions and improves process security, particularly in automated or lights-out machining scenarios. Integration into existing ADMT-style tool systems is straightforward, enabling quick changeover and predictable process behaviour. Production advantages and brand reliability The insert offers a practical balance between wear resistance and toughness, supporting productive milling with fewer tool interventions. Walter Tools' design focus on stable cutting edges and predictable wear patterns contributes to consistent surface quality and lower scrap rates. For operations seeking measurable efficiency gains, the ADMT080304L-F56 WKP35S offers durable performance and process stability, making it an economical choice for medium- to high-volume milling tasks under industrial conditions. Contact Metav Werkzeuge for tailored holder recommendations and delivery options for Walter Tools ADMT080304L-F56 WKP35S milling inserts, including advice on speeds, feeds and compatible tool systems. Technical Data Article number: ADMT080304L-F56-WKP35S-WALTER Designation: ADMT080304L-F56 WKP35S Type: Milling insert (indexable) Series: Tiger·tec Silver Grade: WKP35S Manufacturer: Walter Tools Core data Clearance angle: 15° Nose radius: 0.4 mm Thickness: 3 mm Size code: 08 Tolerance class: M Special features Geometry: Parallelogram 85° Chipbreaker: F56 Material groups: P (steel), K (cast iron) Substrate/coating: Coated cemented carbide (Tiger·tec Silver) Execution: T FAQ What materials is this insert suitable for? The ADMT080304L-F56 WKP35S insert is specified for ISO material groups P and K, meaning it is suitable for machining steel and cast iron. How does the Tiger·tec Silver coating help in production? The Tiger·tec Silver coating on the WKP35S grade reduces abrasive wear and improves heat resistance, extending tool life and supporting consistent productivity in milling operations. What applications benefit most from the parallelogram 85° geometry? The parallelogram 85° geometry is advantageous for shoulder and face milling where stable cutting engagement and predictable force direction are required. Is the chipbreaker suitable for automated machining? Yes, the F56 chipbreaker promotes controllable chip formation for steel and cast iron, which helps reduce cycle interruptions in automated and lights-out machining. Can this insert be used in standard ADMT toolholders? The insert follows the ADMT designation and tolerance class M, allowing compatibility with toolholders designed for ADMT-style indexable inserts when the correct seat geometry is used. Walter Tools (brand appearance: Walter Tools) is part of the Walter AG product family and is recognised for precision machining solutions; the company is associated with high-quality cutting tool technology and global service networks. Protected trademarks and brand names remain the property of their respective owners. The item offered is an original, brand-new product from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT080304L-F56 WSP45G WSP45G Wendeplatten - Walter Tools
High-performance PVD-coated carbide and a geometry tuned for secure cutting deliver consistent chip control and extended tool life; combine these strengths for efficient milling across steel, stainless steel and high-temperature alloys — order directly via Metav Werkzeuge or request application advice from our consultants. ADMT080304L-F56 WSP45G — Milling indexable insert, Tiger·tec Gold PVD, Walter Tools The ADMT080304L-F56 WSP45G is a parallelogram milling indexable insert with a 15° relief angle, developed for versatile milling of steel, stainless steel and heat-resistant alloys. Tiger·tec Gold PVD coating Suitable for steel, stainless steel, superalloys 15° relief angle for secure engagement Parallelogram 85° form, 0.4 mm nose radius Delivering stable cutting across diverse materials The Tiger·tec Gold chemistry combined with a PVD-coated substrate provides a balanced mix of wear resistance and toughness suited to the P/M/S material groups. This WSP45G grade is formulated to cope with the high temperatures and adhesive tendencies of stainless steels while maintaining edge security when machining alloyed steels and heat-resistant superalloys. The result is stable chip formation and predictable tool behaviour, which supports higher process reliability in both mixed-batch production and serial milling tasks. Geometry designed for predictability and edge security A 15° relief angle and a 0.4 mm nose radius create a cutting geometry that reduces edge loading while preserving profile accuracy. The parallelogram 85° form gives an advantageous entering angle for face and shoulder milling, promoting efficient chip split and lower cutting forces. Combined with the F56 chipbreaker, the insert moderates chip size for safe evacuation and consistent surface finish, supporting repeatable results and fewer interruptions for rework. Productivity gains with lower total machining cost By pairing coated carbide metallurgy with optimised geometry, the insert extends effective tool life and reduces the frequency of index changes. Less tool handling and fewer tool changes translate into reduced machine downtime and improved throughput. For operations where consistent surface quality and dimensional control matter, this component contributes to a lower cost per part through longer edge life and better process stability — a rational investment in productivity rather than a speculative upgrade. Application recommendations and machining approach The ADMT080304L-F56 WSP45G is suitable for a wide range of milling operations, from semi-finish passes to continuous profiling, when working with steels, stainless steels and heat-resistant alloys. For best results, combine the insert’s Tiger·tec Gold coating with cutting parameters that control heat at the cutting zone and ensure appropriate coolant or high-pressure air management as required by the workpiece material. For tailored cutting data and feed/speed suggestions specific to machining centres or bar-feed setups, consult Metav Werkzeuge’s technical advisors to match cutting conditions to production goals. Contact Metav Werkzeuge today to discuss application-specific cutting data or to request the ADMT080304L-F56 WSP45G from Walter Tools for improved milling performance and process reliability. Technical Data Article number: ADMT080304L-F56-WSP45G-WALTER Designation: Fräswendeschneidplatte ADMT080304L-F56 WSP45G Walter Tools Product type: milling indexable insert Manufacturer: Walter Tools Series: Tiger-tec Gold Facts Insert size: 08 Thickness: 03 (code) Corner radius: 0.4 mm Relief angle: 15° Tolerance class: M Special features Grade: WSP45G (PVD-coated carbide) Chipbreaker: F56 Shape: parallelogram 85° Applicable materials: P / M / S Execution: T FAQ Which materials are suitable for this milling insert? The ADMT080304L-F56 WSP45G is specified for the P/M/S groups, meaning it machines unalloyed and alloyed steel, stainless steel and heat-resistant superalloys effectively. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the insert enhances wear resistance and edge life while retaining sufficient toughness to resist chipping, offering balanced performance across varied milling tasks. How does the insert geometry affect surface finish and tool life? The combination of 15° relief angle, 0.4 mm nose radius and the F56 chipbreaker reduces cutting forces and improves chip control, which helps maintain surface quality and extends effective tool life. Is this insert suitable for finishing operations? Yes — with appropriate feeds and speeds, the insert’s geometry and coating support both semi-finish and finishing passes while delivering consistent dimensional accuracy. How to choose cutting parameters for the insert? Select parameters that control heat generation for the workpiece material: moderate depths of cut and feeds for stainless steels and superalloys, while higher material removal rates can be used for unalloyed steels; consult Metav Werkzeuge for application-specific data. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
ADMT080304R-D56 WAK15 Wendeplatten - Walter Tools
Take advantage of the combination of sharp aluminium‑grade cutting geometry, stable chip control and predictable edge life to increase throughput in non‑ferrous milling operations. Order the inserts directly via Metav Werkzeuge or request application guidance from the technical consultants. ADMT080304R-D56 WAK15 — Fräswendeschneidplatte (indexable milling insert) by Walter Tools, for aluminium and non‑ferrous metals ADMT080304R-D56 WAK15 is an indexable milling insert designed for productive machining of aluminium and other non‑ferrous materials, combining a dedicated insert grade with a chipbreaker geometry for consistent performance Uncoated carbide for aluminium machining 15° relief angle for sharp cutting Parallelogram 85° geometry for versatile milling 0.4 mm corner radius for fine edge definition Faster, cleaner aluminium machining with a purpose‑built grade The WAK15 grade is an uncoated carbide specifically developed for machining aluminium and other non‑ferrous metals (ISO group N). In practice, this means the cutting edge is optimised for low adhesion and minimal built‑up edge, while the chipbreaker D56 promotes controlled chip formation and evacuation. For operations that prioritise cycle time and surface quality in soft, sticky materials, the ADMT080304R‑D56 WAK15 delivers a predictable cutting behaviour that reduces rework and improves first‑pass yield. Geometry that balances sharpness and edge security The insert’s Parallelogram 85° shape and 15° relief angle combine to create a sharp, accessible cutting edge with reduced interference on radial engagements. The modest 0.4 mm corner radius supports a fine edge geometry that enhances surface finish without compromising strength for light to moderate depths of cut. These geometry choices give reliable edge contact and stable milling characteristics, particularly in interrupted cuts or trochoidal strategies where consistent edge performance is essential. Process reliability through material and series design As part of the Walter N‑Sortensystem, this insert benefits from a production philosophy focused on stable chip formation and broad applicability across non‑ferrous alloys. The uncoated hardness and edge form provide repeatable life and predictable dressing intervals, which supports planning for tool changeovers and inventory rotation. Using this insert helps to reduce unexpected downtime and contributes to a steady production rhythm in aluminium component machining. Practical fitment and shop‑floor benefits Available in size 08 with thickness 03, the insert fits standard toolholders designed for parallelogram‑style inserts and suits many common milling set‑ups used for non‑ferrous work. The combination of chipbreaker D56 and the WAK15 grade reduces the tendency for built‑up material on the edge, improving surface integrity and decreasing manual cleaning. For production planners and operators aiming for consistent part finish and efficient toolhandling, these characteristics simplify process control and quality assurance. Contact Metav Werkzeuge for tailored application advice and reliable supply of Walter Tools ADMT080304R-D56 WAK15 inserts; technical consultants are available to discuss integration into existing milling processes Technical data SKU: ADMT080304R-D56-WAK15-WALTER Article designation: ADMT080304R-D56 WAK15 Manufacturer: Walter Tools Product type: Indexable milling insert (milling insert) Facts Relief angle: 15° Corner radius: 0.4 mm Plate form: Parallelogram 85° Plate size: 08 Plate thickness: 03 Chipbreaker: D56 Tolerance class: M Special features Walter N‑Sortensystem Grade WAK15 — uncoated carbide for non‑ferrous metals Optimised chip formation for aluminium and NE‑metals Suitable for aluminium machining FAQ What materials is this insert suited for? The ADMT080304R‑D56 WAK15 insert is intended for aluminium and other non‑ferrous metals, following the ISO group N designation for minimal adhesion and optimised chip control. How does the chipbreaker D56 affect performance? The chipbreaker D56 on the ADMT080304R‑D56 WAK15 promotes consistent, segmented chips and improves evacuation, which lowers the risk of edge build‑up during aluminium milling. What benefits does the Parallelogram 85° shape provide? The parallelogram 85° geometry delivers flexible cutting edge orientation and reliable engagement in a range of milling strategies, aiding stability and surface quality when using the WAK15 grade. Is the insert coated or uncoated? This item is uncoated carbide (WAK15), a deliberate choice that reduces material adhesion and yields better performance in soft, sticky non‑ferrous alloys. What are the key dimensions to check for toolholder compatibility? Check plate size 08 and thickness 03, plus the parallelogram form and seat, to ensure proper fitment with the corresponding milling toolholder system. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Mention of brand names and trade marks is for explanation only and does not imply any connection between our company and the named brands. The offered item is original, factory‑new goods of the manufacturer.
ADMT080304R-D56 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP25S grade for reliable chip control and prolonged tool life; the D56 chipbreaker and parallelogram 85° form ensure stable clamping and consistent machining of steel and cast iron. Order directly via Metav Werkzeuge or request application advice from our consultants. ADMT080304R-D56 WKP25S Fräswendeschneidplatte – Tiger‑tec Silver coated insert for steel and cast iron (Walter Tools) The ADMT080304R-D56 WKP25S is a parallelogram milling insert designed for secure clamping and high-performance finishing operations on steel and cast iron components. Tiger‑tec Silver coated for extended tool life Optimised D56 chipbreaker for consistent chips Parallelogram 85° form for secure clamping Suitable for steel and cast iron machining Durable coating and grade for predictable productivity The combination of the Tiger‑tec Silver series and the WKP25S grade provides a balanced solution for machining where both wear resistance and edge stability are required. The coated carbide substrate resists thermal and abrasive wear, which translates into longer tool life and fewer indexings during production. For shops running mixed batches of alloyed and unalloyed steels alongside cast components, this configuration supports sustained cycle times and predictable tool-change intervals, contributing to overall process efficiency. Controlled chip formation and machining quality The insert’s D56 chipbreaker is engineered to produce compact, controllable chips when cutting both steels and cast irons, reducing the risk of built-up edge and improving surface finish. Paired with a 15° relief angle and a 0.4 mm corner radius, the geometry minimises cutting forces and supports consistent dimensional results. These aspects help to lower scrap rates and reduce rework, while also enabling stable finishing passes where surface integrity is decisive. Secure clamping and dimensional consistency The parallelogram 85° plate form delivers secure seating in compatible toolholders, improving repeatability and reducing micro‑movement under load. The insert’s size 08 and thickness code 03 match common holder standards, easing integration into existing tooling systems. The coated carbide construction ensures the cutting edge retains geometry across longer series runs, which is especially relevant for repetitive production where tool-change downtime must be minimised. Application guidance and quality assurance Manufactured to tolerance class M, this insert supports consistent interchangeability and predictable performance in standard milling setups. Its designation reflects suitability for ISO groups P and K, meaning the insert is intended for machining steel and cast iron in a range of operations from roughing to finishing, depending on toolpath and cutting data. For customers seeking to align cutting parameters with material batches, technical data sheets and recommended speeds/feed ranges are available to support process validation. Contact Metav Werkzeuge for tailored machining advice on Walter Tools Tiger‑tec Silver inserts and to arrange supply or technical information via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: ADMT080304R-D56-WKP25S-WALTER SKU: ADMT080304R-D56-WKP25S-WALTER Label: Fräswendeschneidplatte ADMT080304R-D56 WKP25S Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Grade/series: WKP25S / Tiger‑tec Silver Material designation: P / K Core technical figures Relief angle: 15° Corner radius: 0.4 mm Plate size: 08 Plate thickness code: 03 Chipbreaker: D56 Tolerance class: M Special features and suitability Coated carbide (Tiger‑tec Silver) Optimised chip control for steel and cast iron Parallelogram 85° plate form Intended for machining ISO groups P (steel) and K (cast iron) FAQ What materials is this insert suitable for? The ADMT080304R-D56 WKP25S is specified for ISO groups P and K, meaning it is suitable for machining steel and cast iron with optimised performance using the Tiger‑tec Silver grade. How does the D56 chipbreaker affect machining? The D56 chipbreaker promotes compact, consistent chips, improving surface quality and reducing chip‑related interruptions when milling steels and cast irons with this Walter Tools insert. What does the 0.4 mm corner radius mean for my parts? A 0.4 mm corner radius balances edge strength and surface finish; it reduces the risk of chipping on interrupted cuts while supporting fine finishing where a small radius is required. Is the insert compatible with standard holders? The parallelogram 85° plate form and size 08 designation match common toolholder standards; check holder compatibility and clamping specifications for secure fitting. What advantages does the Tiger‑tec Silver series provide? Tiger‑tec Silver coating enhances wear resistance and thermal stability, extending useful tool life and supporting stable cutting performance across mixed steel and cast iron applications. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools), with headquarters in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names are used for explanation only; there is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
ADMT080304R-D56 WKP35G Wendeplatten - Walter Tools
Combine long tool life, stable chip control and precise geometry for reliable, repeatable milling results; suitable for steel and cast iron applications. Order the ADMT080304R-D56 WKP35G directly via Metav Werkzeuge or consult the technical team for application advice. ADMT080304R-D56 WKP35G indexable milling insert — Tiger·tec Gold, D56 chipbreaker (Walter Tools) The ADMT080304R-D56 WKP35G is an indexable milling insert designed for precision milling of steel and cast iron, offering a balanced combination of wear resistance and consistent chip formation for industrial milling operations Tiger·tec Gold coating for longer tool life WKP35G: coated carbide grade Parallelogram 85° with 15° clearance 0.4 mm corner radius for stable cuts Improved productivity through advanced coating and grade The combination of the Tiger·tec Gold coating and the WKP35G carbide grade delivers a measurable increase in process stability and tool life. The engineered coating reduces abrasive wear on the cutting edge, which results in fewer tool changes and less machine downtime. For production environments where cycle time and repeatability matter, this insert provides consistent performance under the thermal and mechanical stresses typical of milling steel and cast iron. The result is a higher material removal rate and predictable insert life, supporting leaner machining processes and lower cost per part. Broad material compatibility and reliable chip control Rated for the ISO material groups P and K, the insert is optimised for unalloyed and alloyed steel as well as cast iron, addressing the common requirements in general machining and component production. The designed chipbreaker geometry D56 promotes controlled chip segmentation and evacuation when machining these materials, reducing the risk of re-cutting and improving surface integrity. The grade and geometry combination helps to manage heat generation and brittle chip formation in cast iron, while maintaining edge stability during continuous cuts in steel. Geometry and handling that support precision milling The insert’s parallelogram 85° form and 15° clearance angle provide a reliable cutting orientation for versatile milling strategies, including face and shoulder operations. The 0.4 mm corner radius increases edge robustness, helping to avoid premature chipping in interrupted cuts. Dimension codes such as size 08 and thickness code 03 reflect industry-standard insert sizing for straightforward toolholder compatibility. Tolerance class M ensures consistent dimensional accuracy across batches, which simplifies tool setup and repeatable fixture planning in series production. Contact Metav Werkzeuge today for detailed application guidance, availability and recommendations for Walter Tools Tiger·tec Gold inserts such as the ADMT080304R-D56 WKP35G — Metav Werkzeuge is available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: ADMT080304R-D56-WKP35G-WALTER Designation: ADMT080304R-D56 WKP35G Manufacturer: Walter Tools Product type: Indexable milling insert Facts Tolerance class: M Clearance angle: 15° Corner radius: 0.4 mm Plate form: Parallelogram 85° Size designation: 08 Chipbreaker: D56 Plate thickness code: 03 Special features Coating: Tiger·tec Gold Grade: WKP35G (coated carbide) Application: Steel (P) and cast iron (K) Series note: WKP35G is part of the Tiger·tec Gold family, optimised for stable chip formation and wear resistance FAQ What materials can be machined with this insert? The ADMT080304R-D56 WKP35G insert is designed for machining steel (P) and cast iron (K), reflecting the WKP35G grade characteristics for these ISO groups. How does the D56 chipbreaker influence performance? The D56 chipbreaker promotes segmented chip formation and controlled evacuation when milling steel and cast iron, which improves surface finish and reduces tool load spikes with the ADMT080304R-D56 WKP35G. What does the 0.4 mm corner radius mean for machining? A 0.4 mm corner radius increases edge strength and resistance to chipping, particularly beneficial for interrupted cuts and when stability is required across repeated passes. Is this insert compatible with standard toolholders for size 08? The insert uses the industry size designation 08 and the parallelogram 85° form, making it suitable for compatible Walter Tools holders and common carrier designs specified for this insert geometry. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names belong to their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is original, factory-new goods from the manufacturer.
ADMT080304R-D56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver wear resistance and a proven WKP35S grade for stable, productive milling of Stahl and Gusseisen; the D56 chipbreaker and 85° parallelogram form help secure predictable chip control and consistent surface quality. Order directly via Metav Werkzeuge or contact our consultants for cutting data and tool recommendations. ADMT080304R-D56 WKP35S milling indexable insert — Tiger·tec Silver, for Stahl and Gusseisen (Walter Tools) ADMT080304R-D56 WKP35S is a milling indexable insert designed for medium-duty face and shoulder milling in Stahl and Gusseisen, combining Tiger·tec Silver coating technology with a D56 chipbreaker and a 15° relief for process stability Tiger·tec Silver coating for improved wear resistance Optimised for Stahl and Gusseisen machining Parallelogram 85° form for stable cutting 0.4 mm corner radius for enhanced finish Durable wear resistance that keeps production moving The combination of Tiger·tec Silver coating and the WKP35S grade delivers long-lasting edge life under typical milling stresses. Coated cemented carbide reduces flank wear and crater formation, which translates into fewer indexings and more uninterrupted production time. For users working across mixed batches, the insert’s construction supports consistent surface quality, reducing downstream rework and machine downtime. The controlled wear behaviour also simplifies tool-change planning and cost forecasting, making the insert an efficient choice for repeatable operations. Reliable chip control for safer, predictable machining The integrated D56 chipbreaker and the parallelogram geometry produce short, controllable chips when machining Stahl and Gusseisen, lowering the risk of built-up edge and workpiece damage. Efficient chip formation maintains heat dissipation at the cutting zone and supports stable cutting forces, which is particularly valuable on long tool paths or interrupted cuts. The insert’s 0.4 mm corner radius helps to balance edge strength with surface finish, enabling tight tolerances without sacrificing productivity. Geometry and grade tailored for practical application A defined relief angle of 15° and the 85° parallelogram form prioritise rigidity and repeatability in common milling setups. The manufactured tolerances (class M) and the plate dimensions correspond to established clamping systems, allowing straightforward integration into existing toolholders. Material marking P / K indicates suitability for the ISO workpiece groups for Stahl (P) and Gusseisen (K); this labelling helps to select the insert that matches component material and expected thermal and abrasive conditions. The net result is a versatile, practical insert that supports stable cycle times and reproducible part quality. Contact Metav Werkzeuge to discuss Tiger·tec Silver performance for the ADMT080304R-D56 WKP35S insert and request tailored cutting data or a technical quote — eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical data Article number: ADMT080304R-D56-WKP35S-WALTER SKU: ADMT080304R-D56-WKP35S-WALTER Product type: Milling indexable insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP35S Facts Insert size: 08 Thickness: 03 Relief angle: 15° Corner radius: 0.4 mm Shape: Parallelogram 85° Chipbreaker: D56 Tolerance class: M Special features Substrate/coating: coated cemented carbide (Tiger·tec Silver) Workpiece suitability: Stahl, Gusseisen Execution: T Plate designation: ADMT080304R-D56 ISO designation: ADMT080304R-D56 WKP35S FAQ What materials is this insert suitable for? The ADMT080304R-D56 WKP35S insert is optimised for machining Stahl and Gusseisen, corresponding to the ISO P and K groups identified for the WKP35S grade. What advantage does the Tiger·tec Silver coating provide? Tiger·tec Silver enhances the coated cemented carbide’s wear resistance and thermal stability, which extends flank life and supports more consistent tool performance under milling loads. How does the D56 chipbreaker affect machining? The D56 chipbreaker is designed to produce short, controlled chips in common milling operations, improving chip control and reducing the chance of chip-related interruptions during production. Is the geometry suitable for finishing operations? With a 0.4 mm corner radius and an 85° parallelogram form, the insert balances edge strength and surface quality, making it suitable for operations where repeatable finishes are required. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer Walter Tools.
ADMT080304R-D56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of high process security and versatile material performance for consistent milling results; the PVD-coated Tiger·tec Gold grade and positive parallelogram geometry ensure reliable chip control and extended tool life. Order the insert directly via Metav Werkzeuge or consult their specialists for application advice. ADMT080304R-D56 WSP45G milling indexable insert — Walter Tools (Tiger·tec Gold, PVD-coated, 15° clearance) The ADMT080304R-D56 WSP45G is a parallelogram-shaped milling indexable insert designed for versatile slotting and face-milling applications across steels, stainless steels and heat-resistant alloys Tiger·tec Gold PVD coating for wear resistance Parallelogram 85° geometry for positive entry 15° clearance angle for smooth cutting action Corner radius 0.4 mm for balanced edge strength Prolonged tool life through advanced coating and grade The Tiger·tec Gold series combines a PVD-coated cemented carbide substrate with a modern multilayer design that improves wear resistance and supports stable chip formation. This insert grade, WSP45G, is tailored for applications where both edge stability and versatility are required; the coating reduces adhesion and thermal damage, which in turn extends effective cutting intervals. For production environments seeking predictable downtimes and fewer indexings, the result is a measurable increase in productivity and lower overall tooling costs. Geometry that promotes secure cutting and consistent surfaces The parallelogram 85° shape together with a 15° clearance angle produces a positive cutting action that reduces entry shock and supports smooth surface finishes. The 0.4 mm corner radius balances edge robustness with acceptable surface quality—suitable for medium-depth roughing and finishing passes without aggressive vibration. The D56 chipbreaker geometry promotes controlled chip segmentation, improving evacuation in interrupted cuts and reducing the risk of built-up edge on long continuous cuts. Broad material capability for mixed-production environments Manufactured for multi-material use, the insert is optimised for the ISO groups P, M and S: steels, stainless steels and heat-resistant superalloys/titanium. The combination of the WSP45G grade and coating addresses typical challenges such as heat generation in steels, edge build-up in stainless steels and thermal resistance required for nickel-based alloys. This makes the insert particularly suited to shops that process mixed batches and require one reliable tool grade to cover a wide material mix. Practical benefits for machining processes and process planning Adopting this insert reduces the need for frequent tool changes and simplifies inventory by covering multiple workpiece groups with one grade. The positive geometry aids in reducing cutting forces, which can allow higher feed rates under stable setups; the robust coating supports repeatable component quality. For production engineers, these attributes translate into improved cycle-time predictability and enhanced process security. Contact Metav Werkzeuge for tailored application support on the Tiger·tec Gold ADMT080304R-D56 WSP45G insert to optimise cutting parameters and secure consistent milling performance Technical Data Article number: ADMT080304R-D56-WSP45G-WALTER Product: milling indexable insert Designation: ADMT080304R-D56 WSP45G Brand: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Chipbreaker: D56 Facts Relief/clearance angle: 15° Corner radius: 0.4 mm Plate size: 08 Plate thickness: 03 Insert shape: Parallelogram 85° Tolerance class: M Special features Coating: Tiger·tec Gold (PVD-coated cemented carbide) Material suitability: Steel (P), Stainless steel (M), Superalloys & Titanium (S) Application: milling (face and slot milling) Positive entry geometry for reduced cutting forces FAQ What materials can be machined with this insert? The ADMT080304R-D56 WSP45G insert is suitable for steel (P), stainless steel (M) and heat-resistant superalloys/titanium (S) due to its WSP45G grade and Tiger·tec Gold coating. How does the Tiger·tec Gold coating help in production? The Tiger·tec Gold PVD coating improves wear resistance and reduces adhesion, which supports longer edge life and more consistent chip control during milling. What is the benefit of the parallelogram 85° shape? The parallelogram 85° geometry provides a positive cutting entry that lowers impact at tool engagement, aiding surface quality and enabling reliable performance in interrupted cuts. Is the 0.4 mm corner radius suitable for finishing? A 0.4 mm corner radius offers a compromise between edge strength and surface finish; it is suitable for semi-finishing and finishing where a balance of robustness and quality is required. Can this insert be used for mixed-batch production? Yes; the WSP45G grade and Tiger·tec Gold coating are intended for versatile applications, making the insert a practical choice for workshops processing a variety of materials. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT080304R-F56 WAK15 Wendeplatten - Walter Tools
Taking advantage of a sharp 15° relief and the WAK15 uncoated carbide grade results in reliable, burr‑free machining of aluminium and other non‑ferrous metals; order the ADMT080304R‑F56 WAK15 through Metav Werkzeuge or contact our consultants for application advice. ADMT080304R-F56 WAK15 Fräswendeschneidplatte – for aluminium and non‑ferrous metals | Walter Tools The ADMT080304R‑F56 WAK15 is an indexable milling insert designed for high‑performance machining of aluminium and other non‑ferrous materials, offering a sharp geometry and optimised chip control for stable, productive cutting. Uncoated carbide grade WAK15 15° relief angle for sharp cutting Parallelogram 85° form, 0.4 mm corner radius Chipbreaker F56 optimised for aluminium Faster material removal on aluminium and non‑ferrous metals The combination of the WAK15 uncoated carbide and the chipbreaker F56 enables efficient evacuation of soft chips and reduces built‑up edge when machining aluminium, copper or brass. The insert’s geometry is adapted to the specific demands of non‑ferrous ISO group N, which means that cutting forces are lower and feed rates can be increased without compromising surface quality. This results in shorter cycle times and more parts per shift, supporting higher throughput in production environments. Reduced adhesion and cleaner surfaces through sharp geometry A 15° relief angle combined with a fine 0.4 mm corner radius produces a very sharp cutting edge that minimises material adhesion and smear on the cutting edge. For components where surface appearance and dimensional consistency matter, this geometry helps to maintain a clean contact zone and reduces secondary finishing. The insert’s form also helps to limit vibration at the cutting edge, which further supports improved surface finish on profiles and thin‑wall workpieces. Consistent edge life and reproducible results The ADMT080304R‑F56 WAK15 is manufactured to a tolerance class M and the parallelogram 85° form ensures repeatable seating in compatible toolholders. These controlled tolerances lead to predictable tool life and simpler tool‑change planning. For operations that require batch‑to‑batch consistency, the reproducible performance of this insert reduces inspection effort and supports continuous, reliable production. Seamless integration into Walter N‑series tooling systems Designed for the Walter N‑series, the insert fits holders that are optimised for efficient chip formation and secure clamping. The standardised geometry and clear designation help with quick tool selection and straightforward inventory management. Where toolroom flexibility is needed, the insert’s familiar form factor allows rapid exchange between operations without additional set‑up time, supporting lean processes on the shop floor. Practical benefits for workshop and production planners Beyond cutting performance, the insert aids process planning by simplifying grade selection: the WAK15 grade is expressly intended for non‑ferrous work, such as aluminium and similar alloys. Choosing the correct chipbreaker and edge preparation avoids common issues like material build‑up and erratic tool wear, which translates into lower scrap rates and reduced rework. For teams aiming to raise productivity without complex process changes, this insert offers an effective, low‑risk upgrade. For precision milling of aluminium and non‑ferrous metals, choose the Walter Tools ADMT080304R‑F56 WAK15 and contact Metav Werkzeuge for tailored application support and availability. Technical Data SKU: ADMT080304R-F56-WAK15-WALTER Product type: Fräswendeschneidplatte (milling insert) Manufacturer: Walter Tools Series: Walter N-Sortensystem Grade: WAK15 Chipbreaker: F56 Form: Parallelogramm 85° Execution: T Tolerance class: M Facts Relief angle: 15° Corner radius: 0.4 mm Size code: 08 Thickness code: 03 Special features Uncoated cemented carbide (WAK15) Intended for aluminium and non‑ferrous metals (ISO group N) Optimised chip control for soft chips Stable seating in Walter N‑series holders Parallelogram 85° insert geometry FAQ What materials is this insert suited for? The ADMT080304R‑F56 WAK15 is specifically intended for aluminium and other non‑ferrous materials (ISO group N), offering geometry and a chipbreaker tuned to prevent material adhesion. How does the chipbreaker F56 affect cutting? The chipbreaker F56 on this indexable insert promotes controlled chip formation when machining soft alloys, reducing the risk of long, stringy chips and improving surface consistency. Is the insert coated? No, the WAK15 designation denotes an uncoated cemented carbide grade optimised for sharp edges and low friction on non‑ferrous materials. What does the 0.4 mm corner radius mean for component finish? A corner radius of 0.4 mm helps balance edge strength and finish quality; it supports a smoother surface while remaining sharp enough to limit material build‑up. Can this insert be used in standard Walter N‑series holders? Yes, the ADMT080304R‑F56 WAK15 is made for the Walter N‑series system and will seat correctly in compatible holders designed for the parallelogram 85° form. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
ADMT080304R-F56 WKP25S Wendeplatten - Walter Tools
Take advantage of the WKP25S grade and Tiger·tec Silver coating to increase process reliability and tool life; the parallelogram 85° geometry and F56 chipbreaker ensure controlled chips and simple indexing. Order directly via Metav Werkzeuge or ask the Metav consultants for application advice. ADMT080304R-F56 WKP25S – indexable milling insert, parallelogram 85° (Walter Tools) The ADMT080304R-F56 WKP25S is an indexable milling insert designed for high-productivity machining of steel and cast iron, offering robust edge performance and consistent chip control for batch and single-part production Tiger·tec Silver coating for extended tool life WKP25S grade for steel and cast iron machining Parallelogram 85° geometry for flexible indexing 15° clearance with 0.4 mm corner radius Maximise uptime with advanced coating and grade The combination of the Tiger·tec Silver coating and the WKP25S carbide grade provides a reliable balance between wear resistance and toughness. This results in improved tool life and stable cutting under typical steel and cast iron conditions. The coating reduces flank wear and thermal softening during interrupted cuts, which supports consistent cycle times and fewer tool changes — a clear advantage for high-volume milling and mixed-production environments. Predictable chip control for productive machining Equipped with the F56 chipbreaker, the insert delivers controlled chip formation across a broad range of feed rates. For materials in ISO groups P (steel) and K (cast iron) the chip geometry helps avoid long, stringy chips and encourages short, manageable segments. Better chip control reduces downtime for clearing and improves surface finish, contributing directly to process efficiency and safer operation at the machine. Flexible indexing and secure cutting geometry The parallelogram 85° shape offers multiple usable cutting edges and straightforward indexing, reducing tooling costs per edge. The 15° clearance angle and 0.4 mm corner radius combine to provide a secure cutting edge that tolerates moderate interruptions while maintaining a good balance between strength and edge sharpness. These geometric choices support repeatable programme results and make the insert suitable for diverse milling strategies. Clear specifications that aid planning and procurement Tolerance class M and the plate designation reflect consistent manufacturing accuracy, simplifying tool-holder matching and replacement planning. The insert thickness and plate size align with standard holders for the ADMT family, enabling predictable setup times and inventory handling. Using a dedicated grade from a recognised range reduces qualification effort and helps maintain stable production quality. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver inserts and to discuss integration into existing toolsets — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: ADMT080304R-F56-WKP25S-WALTER Label: Fräswendeschneidplatte ADMT080304R-F56 WKP25S Walter Tools Product type: Fräswendeschneidplatte Facts Clearance angle: 15° Corner radius: 0.4 mm Plate size: 08 Thickness: 03 Geometry: Parallelogram 85° Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKP25S Chipbreaker: F56 Material suitability: P / K (Steel, Cast iron) Series: Tiger-tec Silver Execution: T Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The ADMT080304R-F56 WKP25S is specified for ISO groups P and K, meaning it is intended for machining steel and cast iron. What is the benefit of the Tiger·tec Silver coating? The Tiger·tec Silver coating increases wear resistance and thermal stability, which leads to longer cutting life and more consistent performance on the WKP25S grade. How does the F56 chipbreaker affect machining? The F56 chipbreaker promotes short, controlled chips across typical feeds, improving chip evacuation and reducing the risk of entanglement during milling. Why choose the parallelogram 85° shape? The parallelogram 85° geometry offers multiple indexable edges and flexible mounting options, supporting economical edge use and easy re-indexing. What does the 0.4 mm corner radius mean for surface finish? A 0.4 mm corner radius balances edge strength with finish quality: it resists chipping while still enabling a good surface result on general-purpose milling tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
ADMT080304R-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WKP35G grade and precise geometry to improve machining stability and extend tool life; order directly via Metav Werkzeuge or ask our consultants for application advice. ADMT080304R-F56 ADMT080304R-F56 WKP35G WKP35G Milling insert, Tiger‑tec Gold, for steel & cast iron — Walter Tools The ADMT080304R-F56 WKP35G is a Tiger‑tec Gold‑coated milling insert developed for productive machining of steel and cast iron, offering reliable chip control and consistent tool life in industrial applications. Tiger·tec Gold coating for extended tool life Optimised F56 chip control for stable chips 15° relief angle for secure cutting engagement Parallelogram 85° shape with 0.4 mm corner radius Higher productivity through coated‑carbide performance The combination of the Tiger‑tec Gold series and the WKP35G grade delivers a wear‑resistant, coated carbide chemistry that is tuned to the thermal and abrasive conditions of machining steel and cast iron. Coated carbide means a hard substrate covered by a protective layer; this reduces flank wear and maintains the cutting edge for longer intervals, which in turn reduces interruptions for tool changes and increases net machining time. The result is measurable process stability and predictable performance in production runs. Geometry engineered for stable cutting and surface quality A 15° relief angle and the parallelogram 85° form combine with a 0.4 mm corner radius to provide a balance between edge strength and accessibility for common milling tasks. The F56 chipbreaker is optimised to break and guide chips reliably in mixed steel and cast‑iron workpieces, preventing long stringing chips and minimising rework. These geometric choices directly improve surface finish and reduce the risk of edge chipping during interrupted cuts, offering tangible benefits for both roughing and semi‑finishing operations. Consistent integration and process reliability Tolerance class M, standard plate dimensions and the proven series specification simplify tool logistics and ensure reproducible seating in compatible toolholders. The ADMT080304R‑F56 series from Walter Tools is designed for repeatable changeovers and predictable wear progression, which supports lean production practices and maintenance planning. Where process stability and reduced scrap rates are priorities, this insert contributes to fewer unplanned stoppages and steadier output quality. Contact Metav Werkzeuge for application‑specific recommendations on the Walter Tools ADMT080304R‑F56 WKP35G milling insert, or to request a tailored proposal: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: ADMT080304R-F56-WKP35G-WALTER Label: Fräswendeschneidplatte ADMT080304R-F56 WKP35G Walter Tools Manufacturer: Walter Tools Product type: Milling insert Facts Relief angle: 15° Corner radius: 0.4 mm Plate size: 08 Plate thickness: 03 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WKP35G (coated carbide) Chipbreaker: F56 Shape: Parallelogram 85° Machinable materials: steel (P), cast iron (K) Execution: T FAQ What materials is this insert intended for? The ADMT080304R‑F56 WKP35G insert from Walter Tools is specified for steel (P) and cast iron (K) applications according to its Tiger‑tec Gold technology. How does the F56 chipbreaker affect machining? The F56 chipbreaker on the ADMT080304R‑F56 WKP35G promotes short, controllable chips in both steel and cast iron, reducing chip entanglement and improving component quality. Is the insert compatible with standard toolholders? Yes; the ADMT080304R‑F56 family is produced to standard dimensions and tolerance class M for consistent seating in compatible milling holders. What benefits does the Tiger‑tec Gold series provide? Tiger‑tec Gold coating on the WKP35G grade enhances wear resistance and thermal stability, which extends cutting life and supports uninterrupted machining cycles. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are cited solely for clarification. There is no affiliation between our company and the mentioned brands. The offered article is original, factory‑new goods of the manufacturer.
ADMT080304R-F56 WKP35S Wendeplatten - Walter Tools
Reliable high-performance milling is delivered by the WKP35S grade combined with the Tiger‑tec Silver series and a precise 15° relief; ideal for producers seeking consistent results in steel and cast iron machining — order via Metav Werkzeuge or consult our specialists for tool selection. ADMT080304R-F56 WKP35S Milling indexable insert, Tiger‑tec Silver – Walter Tools The ADMT080304R-F56 WKP35S is a parallelogram milling insert engineered for robust cutting of steel and cast iron, combining the WKP35S coated carbide grade with a chipbreaker designed for reliable chip control. Tiger‑tec Silver coating for reliable tool life WKP35S grade optimised for steel and cast iron Parallelogram 85° geometry for secure seating 15° relief and 0.4 mm corner radius for precision Increased productivity through proven grade technology The WKP35S grade — part of the Tiger‑tec Silver series — brings a measurable improvement in process stability for medium to heavy milling applications. Designed as a coated carbide cutting grade, the insert’s surface treatment reduces abrasive wear and supports longer cutting intervals, which in practical terms means fewer insert changes and steadier cycle times on batch production runs. The F56 chipbreaker geometry helps form and evacuate chips consistently when machining P and K materials, translating into higher throughput and lower tooling costs per finished part. Geometry and seat design that support accurate machining A parallelogram 85° plate form with a 15° relief provides a reliable seating angle and positive cutting action for shoulder milling and light profiling. The 0.4 mm corner radius balances edge strength with the ability to achieve close-to-final dimensions, reducing the need for secondary finishing. These geometric choices affect process predictability: the insert’s form reduces chatter risk in common milling set-ups and helps maintain surface integrity on cast and steel components, particularly where dimensional repeatability is required across series production. Application guidance and material compatibility Marked for material groups P / K, the insert is intended for machining unalloyed and alloyed steel as well as cast iron. The WKP35S grade is optimised for the heat and chip-formation behaviour typical of these groups, providing stable edge life under variable cutting conditions. When replacing conventional grades, operators can expect comparable surface quality with improved wear resistance; for new set-ups, selecting appropriate cutting data alongside the F56 chipbreaker will be decisive to achieve long tool life and secure chip evacuation. Practical benefits for workshop and production planners By combining a resilient coating system with a purposely engineered chipbreaker, this insert reduces unplanned interruptions and supports predictable maintenance cycles. The compact insert size and standard thickness designation enable straightforward integration into common milling cutters, simplifying inventory management. Choosing the Tiger‑tec Silver WKP35S solution helps to standardise tooling across similar steel and cast‑iron operations, supporting both day-to-day reliability and long‑term cost efficiency. For advice on applying the WKP35S Tiger‑tec Silver grade and availability of the ADMT080304R-F56, contact Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930. Technical Data SKU: ADMT080304R-F56-WKP35S-WALTER Designation: ADMT080304R-F56 WKP35S Type: Milling indexable insert Brand: Walter Tools Core technical data Free angle: 15° Corner radius: 0.4 mm Geometry: Parallelogram 85° Size designation: 08 Thickness designation: 03 Special features and materials Series: Tiger‑tec Silver Grade: WKP35S (coated carbide) Chipbreaker: F56 Tolerance class: M Execution: T Material groups: P (steel), K (cast iron) FAQ What materials is this insert suitable for? The ADMT080304R-F56 WKP35S insert is specified for material groups P and K, meaning it is suited to machining various steels and cast iron as a primary application. How does the Tiger‑tec Silver series improve performance? Tiger‑tec Silver provides a robust coating system that enhances wear resistance and thermal stability, enabling the WKP35S grade to maintain edge life and process stability during prolonged milling cycles. Which chipbreaker is integrated and what is its benefit? The insert features the F56 chipbreaker, which is designed to control chip shape and evacuation in both steel and cast iron operations, reducing tool clogging and improving surface finish. Is the geometry suitable for shoulder milling and profiling? Yes; the parallelogram 85° form combined with a 15° relief and 0.4 mm corner radius is well suited to shoulder milling and light profiling where dimensional control is required. Can this insert be used as a direct replacement for other WKP grades? The WKP35S grade is optimised for a balance of wear resistance and toughness; compatibility as a direct replacement depends on the previous grade’s properties and the specific cutting conditions, but WKP35S often improves tool life in mixed steel and cast iron applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are referenced for explanation only and do not imply any affiliation between our company and the trademark holders. The offered item is an original, factory‑new product of the respective manufacturer.
ADMT080304R-F56 WSM35G T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSM35G grade for secure chip control and extended edge life in demanding milling of stainless steels and heat‑resistant alloys; order directly via Metav Werkzeuge or consult our specialists for application support. ADMT080304R-F56 WSM35G milling insert – Parallelogram 85°, 15° relief (Walter Tools) A ADMT080304R-F56 WSM35G milling insert designed for productive milling of stainless steels and heat‑resistant superalloys in industrial CNC operations. Tiger‑tec Gold coating for heat resistance WSM35G grade for stainless and superalloys Parallelogram 85° form with 15° relief 0.4 mm corner radius for robust edges Increase cutting stability in demanding materials The combination of the WSM35G cutting grade and the Tiger·tec Gold coating delivers improved edge stability and stable chip formation when machining tough materials. Specifically developed for ISO M and S groups, this coated carbide grade resists thermal softening and edge breakdown during prolonged cuts. As a result, the indexable insert supports consistent component quality and reduces unplanned tool changes, contributing directly to smoother production flows. Geometry engineered for secure engagement and accessibility The parallelogram 85° insert form with a 15° relief angle provides a controlled cutting geometry that reduces radial cutting forces and helps maintain a positive rake in milling cutters. The 0.4 mm corner radius balances edge strength with surface finish capability, making the grade suited to both continuous and interrupted cuts. These geometric choices enhance mechanical reliability at the cutter seat and simplify toolholder selection for integrated milling systems. Optimise throughput and process reliability By combining a thermally stable coating with a robust substrate, the insert enables higher cutting parameters where material and machine allow, improving material removal rates and lowering overall machining costs per component. The tolerance class M ensures repeatable seating and interchangeability between cutter bodies, supporting predictable tool life and easier inventory management on the shop floor. For production environments seeking efficient, reproducible results, this indexable solution contributes to measurable process security. Practical selection and application advice Choose this insert where stainless steels or heat‑resistant superalloys demand a coated carbide solution with high thermal resilience and consistent chip control. The F56 chipbreaker geometry and the WSM35G grade are particularly suitable when stable chip formation and edge retention are priorities. For adaptions to different workpiece geometries or surface requirements, consult milling cutter specifications to ensure compatible seat angles and clamp types; small geometry changes can significantly affect finish and tool life. Contact Metav Werkzeuge for availability, sample trials and tailored application advice on Walter Tools Tiger·tec Gold inserts – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ADMT080304R-F56-WSM35G-WALTER Label: Fräswendeschneidplatte ADMT080304R-F56 WSM35G Walter Tools Type: Milling insert Facts Relief angle: 15° Corner radius: 0.4 mm Plate size: 08 Plate thickness code: 03 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WSM35G Chipbreaker: F56 Plate form: Parallelogram 85° Material groups: S / M (superalloys / stainless steels) Execution: T Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The ADMT080304R-F56 WSM35G milling insert is formulated for ISO M and S groups, making it suitable for stainless steels and heat‑resistant superalloys when high thermal stability and chip control are required. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WSM35G grade increases heat resistance and edge life, which helps maintain consistent cutting performance and reduces the frequency of insert changes in continuous production. What does the 85° parallelogram form mean for cutter selection? The parallelogram 85° form provides a specific cutting orientation that improves accessibility and reduces radial loads; ensure the milling cutter accepts parallelogram seats with the corresponding relief and clamp design for correct seating. Is the 0.4 mm corner radius suitable for finishing? A 0.4 mm corner radius is a compromise between edge strength and surface finish; it offers robust performance for many finishing and semi‑finishing operations but may be adjusted depending on final surface requirements. Can this insert handle interrupted cuts? Yes, the combination of the WSM35G grade, F56 chipbreaker and the chosen geometry supports interrupted cutting where edge stability and chip evacuation are crucial. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT080304R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from a high-performance PVD grade and a secure parallelogram form for consistent productivity and predictable tool life; order the ADMT080304R-F56 WSP45G directly via Metav Werkzeuge or ask our consultants if needed. ADMT080304R-F56 WSP45G – Indexable milling insert, Tiger·tec Gold PVD, 15° relief – Walter Tools The ADMT080304R-F56 WSP45G is an indexable milling insert engineered for versatile face and shoulder milling in industrial production environments, optimised for steels, rostfreier Stahl and heat-resistant alloys. Tiger·tec Gold PVD coating for long tool life 15° relief angle for versatile milling Parallelogram 85° form for secure cutting Suitable for Stahl, rostfreier Stahl and superalloys Increase throughput with a proven PVD grade The combination of the Tiger·tec Gold coating and the WSP45G grade provides a stable, wear-resistant cutting edge that translates into higher machining efficiency. As a PVD-coated solution, this insert offers improved heat resistance and adhesion between coating and substrate, which helps to maintain cutting performance under elevated temperatures typical of high-speed milling. The reliable coating behaviour reduces the frequency of index changes and supports consistent batch quality, making it suitable for shops aiming to reduce cycle time while maintaining repeatable surface finishes. Secure chip control and dependable performance on demanding materials Equipped with the chipbreaker F56, the plate supports predictable chip formation across a broad material range. The grade is specifically designed for machining Stahl, rostfreier Stahl and Superlegierungen/Titan, where chip morphology and heat management are critical. Stable chip control minimises rework and improves tool life, particularly when machining tough or gummy materials; this leads to fewer interruptions and a smoother production flow. For operations seeking to expand capability into more challenging alloys, the insert’s balanced geometry and cutting edge integrity provide a reliable baseline for process development. Precise seating, repeatable clamping and flexible machining setup The Parallelogram 85° shape, combined with a 15° relief and a corner radius of 0.4 mm, offers a secure seat in the cutter body and flexible cutting edge options for both roughing and finishing passes. The insert size code 08 and thickness code 03 correspond to standard cutter families, enabling quick tool changes and straightforward inventory management. The tolerance class M ensures reproducible positioning, which supports tight machining tolerances and reduces setup time. Overall, the geometry and specifications are chosen to balance cutting forces, rigidity and accessible cutting-edge choices for a range of milling scenarios. Contact Metav Werkzeuge for application advice, stock availability and tailored recommendations for the Walter Tools Tiger·tec Gold inserts, or request machining data for specific materials and speeds Technical data SKU: ADMT080304R-F56-WSP45G-WALTER Designation: ADMT080304R-F56 WSP45G Type: Fräswendeschneidplatte Brand: Walter Tools Facts Relief angle: 15° Corner radius: 0.4 mm Insert size code: 08 Thickness code: 03 Design & features Grade/Coating: Tiger·tec Gold – WSP45G (PVD-coated carbide) Chipbreaker: F56 Form: Parallelogram 85° Tolerance class: M Material suitability: Stahl; rostfreier Stahl; Superlegierungen/Titan FAQ What materials can this insert machine effectively? The ADMT080304R-F56 WSP45G insert is optimised for Stahl, rostfreier Stahl and heat-resistant superalloys, offering stable chip formation and thermal resistance for these groups. Is the coating suitable for high-speed milling? Yes, the Tiger·tec Gold PVD coating on the WSP45G grade is designed to withstand elevated temperatures, making it appropriate for higher cutting speeds in many milling operations. What cutting tasks is the parallelogram 85° form best for? The parallelogram 85° geometry provides secure seating and is particularly effective for face and shoulder milling where repeatable clamping and edge selection are important. How does the chipbreaker F56 affect process stability? The F56 chipbreaker promotes consistent chip control across a wide range of feeds, reducing the risk of built-up edge and improving surface finish and tool life stability. Can the insert be used for finishing passes? With a corner radius of 0.4 mm and the available cutting edges, the insert supports both productive roughing and controlled finishing operations when set up with appropriate parameters. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT080304R-G56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability and efficient chip control for predictable production results; the WKP35S grade with Tiger·tec Silver technology ensures long tool life and consistent surface finish. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. ADMT080304R-G56 WKP35S — Fräswendeschneidplatte by Walter Tools (Parallelogram 85°, 15° clearance) ADMT080304R-G56 WKP35S is a coated carbide milling insert designed for productive machining of steel and cast iron in industrial milling applications Tiger·tec Silver coating, WKP35S grade Parallelogram 85° form for precise milling 15° clearance angle for secure cutting Radius 0.4 mm for universal finishing Reliable material performance for steel and cast iron The combination of Tiger·tec Silver coating and the WKP35S carbide grade delivers a balance of wear resistance and thermal stability tailored to the ISO P and K material groups. This makes the insert particularly suitable for unalloyed and alloyed steel as well as cast iron, where abrasive wear and intermittent chip formation demand a robust cutting edge. The coating reduces flank and crater wear, extending cutting intervals and supporting predictable tool life, which benefits batch production and single‑piece flows alike. Consistent chip control and edge geometry that boosts productivity Equipped with the G56 chipbreaker and a 0.4 mm corner radius, the insert promotes reliable chip formation and evacuation under varying cutting conditions. The parallelogram 85° shape enhances insert rigidity and supports stable engagement in shoulder and face milling operations. With a 15° clearance angle the cutting edge achieves favourable shear conditions, lowering cutting forces and contributing to surface integrity. Together, these features reduce unplanned stoppages and improve cycle time consistency. Easy integration into existing tool systems for low downtime The insert format (designation ADMT080304R‑G56) and its dimensional series allow straightforward replacement in holders designed for this geometry. The standardised size and tolerance class M simplify inventory management and make tool changes predictable. Reduced setup complexity and the extended service intervals of the coated grade support lower overall processing costs and faster ramp‑up when changing jobs or materials. Practical advantages for production environments Built for repetitive industrial use, the insert’s balanced properties aim to combine process safety with surface quality and repeatability. The coated carbide substrate helps maintain a sharp, stable cutting edge across extended runs, while the chipbreaker geometry addresses typical chip shapes from steel and cast iron. For manufacturing teams seeking consistent part quality and fewer tool interventions, this solution offers a pragmatic route to higher productivity. Contact Metav Werkzeuge for tailored application advice or to request order options for Walter Tools inserts, including compatibility checks and recommended cutting data. Technical data Article number: ADMT080304R-G56-WKP35S-WALTER Designation: ADMT080304R-G56 WKP35S Type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP35S Material base: P / K Chipbreaker: G56 Tolerance class: M Execution: T Facts Clearance angle: 15° Corner radius: 0.4 mm Plate form: Parallelogram 85° Plate size: 08 Plate thickness: 03 Special features Coating: Tiger·tec Silver Suitable for: Steel (P) and Cast iron (K) Application focus: productive milling, reliable chip control Design benefits: enhanced edge stability, standardised geometry FAQ Which materials are recommended for this insert? The ADMT080304R‑G56 WKP35S insert is recommended for steel (ISO group P) and cast iron (ISO group K), reflecting the WKP35S grade design and the Tiger·tec Silver coating. What benefit does the G56 chipbreaker provide? The G56 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of recutting and helping to maintain consistent surface finish during milling of steel and cast iron. How does the 0.4 mm corner radius affect results? A 0.4 mm corner radius offers a balance between strength and edge sharpness, supporting improved finishing and moderate robustness for interrupted cuts without excessive edge stress. Is this insert compatible with standard holders for parallelogram 85° types? The ADMT080304R‑G56 geometry follows standard parallelogram 85° dimensions and tolerance class M, enabling compatibility with holders designed for this insert family; verify holder designation against the ADMT08 series. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT080304R-G56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold PVD-coated grade and the G56 chipformer for dependable chip control and prolonged edge life; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. ADMT080304R-G56 (ADMT080304R-G56 WSP45G) indexable milling insert — Tiger·tec Gold, chipbreaker G56 | Walter Tools ADMT080304R-G56 WSP45G is an indexable milling insert designed for versatile milling across steels, stainless steels and heat-resistant alloys in industrial machining environments. Tiger·tec Gold PVD-coated grade WSP45G Suitable for steel, stainless steel and superalloys Parallelogram 85° geometry for stable engagement 15° relief with 0.4 mm corner radius High reproducibility and secure edge life for continuous milling The combination of the Tiger·tec Gold coating and a PVD-coated carbide base delivers consistent wear behaviour and reduces the risk of premature edge failure under typical milling stresses. The chosen grade targets the heat and chip-formation patterns encountered when machining steels and stainless steels, which means fewer interruptions in production and more predictable tool change cycles. The robust microstructure of the coated grade supports steady cutting forces, ensuring process stability even in medium-duty finishing and semi-roughing operations. Broad material capability with optimised chip control Designed for the ISO groups P/M/S, the insert supports machining of unalloyed and alloyed steels, stainless steels and heat-resistant superalloys or titanium, where thermal load and chip form demand a resilient grade. The integrated chipformer G56 improves chip breaking and evacuation, reducing re-cutting and the likelihood of built-up edge. As a result, surface quality benefits and machine downtimes are diminished, making the solution well suited to workshops that require both versatility and consistent component quality. Geometry and tolerance that simplify setup and repeatability The parallelogram 85° configuration together with a 15° relief and 0.4 mm corner radius provides a stable cutting engagement and improved edge security during radial and axial cuts. The insert's execution and tolerance class contribute to reliable seat positioning in compatible cutter bodies and support reproducible indexing. For production engineers this translates to predictable fixture behaviour and reduced time spent on re-centring or compensating for tool offset variation. If additional cutting data or application advice is required, the technical team at Metav Werkzeuge can provide tailored recommendations. Contact Metav Werkzeuge for specific cutting data, availability of Walter Tools Tiger·tec Gold inserts and application-focused advice tailored to the production needs. Technical Data SKU: ADMT080304R-G56-WSP45G-WALTER Label: Fräswendeschneidplatte ADMT080304R-G56 WSP45G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSP45G ISO designation: ADMT080304R-G56 WSP45G Execution: T Tolerance class: M Core Data Relief angle: 15° Corner radius: 0.4 mm Plate form: Parallelogram 85° Plate size: 08 Plate thickness: 03 Materials & Features Material compatibility: P / M / S Chipbreaker: G56 Coating: Tiger·tec Gold (PVD) Application: Milling Design: Indexable milling insert FAQ What materials is this insert suited for? The WSP45G grade is suitable for steels, stainless steels and heat-resistant superalloys/titanium; the insert delivers balanced performance across the ISO P, M and S groups. What does the Tiger·tec Gold designation indicate? Tiger·tec Gold denotes Walter Tools’ PVD coating technology paired with a tailored carbide substrate to improve wear resistance and cutting-edge stability under milling conditions. How does the G56 chipformer affect machining? The G56 chipformer enhances chip breaking and evacuation, which supports improved surface finish and lowers the risk of chip-related interruptions during milling. Why choose a parallelogram 85° geometry? The parallelogram 85° geometry provides stable tool engagement and reliable cutting forces during radial and axial milling, helping to maintain dimensional consistency across batches. Is the corner radius suitable for finishing tasks? The 0.4 mm corner radius offers a compromise between edge strength and surface quality, making the insert appropriate for medium-to-fine finishing operations where edge robustness is required. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, brand-new merchandise from the manufacturer. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
ADMT080308L-F56 WKP35S Wendeplatten - Walter Tools
Reliable productivity and broad material compatibility make the ADMT080308L-F56 WKP35S an efficient choice for demanding milling tasks. The Tiger·tec Silver coating and the WKP35S grade provide enhanced wear resistance and consistent chip control, while the 0.8 mm corner radius ensures edge security and predictable finishes. Order via Metav Werkzeuge or consult the technical advisors for application support. ADMT080308L-F56 WKP35S milling insert — Tiger·tec Silver, for steel and cast iron — Walter Tools The ADMT080308L-F56 WKP35S is a parallelogram 85° milling insert aimed at productive machining of steel and cast iron, combining a robust chipbreaker and a coated carbide grade for stable performance. Tiger·tec Silver coating for longer tool life Wide suitability for steel and cast iron machining Parallelogram 85° geometry for flexible cutter use 0.8 mm corner radius for secure cutting edges Durable coating and grade for longer productive runs The Tiger·tec Silver series, with the WKP35S grade, is engineered to resist abrasive and thermal wear commonly encountered when machining steel and cast iron. The combination of a coated carbide substrate and modern coating technology provides improved wear resistance and stable chip formation, which translates into fewer tool changes and higher throughput on the shop floor. This technical design reduces unexpected downtime and supports consistent production quality. Geometry and edge design that stabilise cutting performance The parallelogram 85° plate form, paired with a relief angle of 15° and a 0.8 mm corner radius, ensures reliable edge security and predictable contact conditions in the cut. The integrated F56 chipbreaker controls chip flow for typical cast and steel chips, improving surface finish and reducing the risk of built-up edge. Together these geometric choices support repeatable, vibration-resistant milling across a range of radial engagements. Process reliability through tailored application properties Built to tolerance class M, this insert offers reproducible mounting and dimensional consistency, helping to maintain process stability across multi-shift operations. The product’s suitability for material groups P and K (steel and cast iron) means one grade can cover several common production tasks, simplifying tooling inventory and decision-making. The overall effect is predictable tool life and a stable machining window for planners and operators. Practical benefits for toolroom and production use Compatibility with common milling cutter systems and a clear geometry profile make the insert straightforward to integrate into existing setups. The coated grade and the robust chipbreaker reduce rework and improve first-pass part quality, while the standardised plate size and thickness facilitate quick changes. For operations seeking a balance between tool life and surface quality, this configuration represents a practical, cost-effective choice. For application advice and availability of the Walter Tools ADMT080308L-F56 WKP35S insert, contact Metav Werkzeuge for tailored recommendations and order support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADMT080308L-F56-WKP35S-WALTER Designation: ADMT080308L-F56 WKP35S Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Silver Core data Relief angle: 15° Corner radius: 0.8 mm Plate form: Parallelogramm 85° Plate size: 08 Plate thickness: 03 Special features Grade: WKP35S Chipbreaker: F56 Material suitability: P / K Tolerance class: M Execution: T FAQ What materials is this insert designed for? The ADMT080308L-F56 WKP35S insert is specified for material groups P and K, meaning it is suited to machining steel and cast iron. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the WKP35S grade enhances wear resistance and thermal stability, which contributes to longer useful tool life and consistent surface quality. What does the 85° parallelogram shape provide? The parallelogram 85° geometry offers flexible mounting positions and stable cutting engagement, helping to reduce vibrations and support a variety of milling strategies. Is the insert suitable for heavy roughing or finishing? With a 0.8 mm corner radius and the F56 chipbreaker, the insert balances edge strength and chip control; it is appropriate for robust roughing as well as finishing operations where this geometry and grade meet process parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
ADMT080308L-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of long tool life and stable chip control from the combination of Tiger·tec Gold coating and a robust 0.8 mm corner radius for reliable milling of steels, stainless steels and heat‑resistant alloys; order or request technical advice via Metav Werkzeuge for swift supply and application support. ADMT080308L-F56 WSP45G — indexable milling insert (Tiger·tec Gold) by Walter Tools The ADMT080308L-F56 WSP45G is a Tiger·tec Gold‑coated indexable milling insert designed for versatile face and profile milling across steel, stainless steel and high‑temperature alloys. Tiger·tec Gold PVD coating for long tool life Suitable for P / M / S material groups Parallelogram 85° geometry for stable engagement 0.8 mm corner radius for reliable edge strength Extended life and reproducible edge performance with Tiger·tec Gold The coated Tiger·tec Gold grade provides a PVD surface that improves thermal resistance and wear behaviour under typical milling loads. This results in consistent edge stability and fewer unscheduled tool changes, which supports higher machine uptime and predictable batch outputs. The coating technology is engineered for a broad range of applications, so operators benefit from fewer tool variants while maintaining process reliability. Geometry and chip control that support productive milling The parallelogram 85° insert geometry combined with a 15° clearance angle delivers secure engagement and good axial rigidity in slotting and shoulder milling. The integrated F56 chipbreaker assists in generating short, controllable chips on interrupted and continuous cuts, reducing rework and tool‑related stoppages. The 0.8 mm corner radius enhances edge strength, improving resistance to chipping under moderate radial depths of cut and making the insert suitable for both roughing and semi‑finishing operations. Predictable performance for mixed‑material production Designed for the P / M / S ISO groups, the grade is optimised for unalloyed and alloyed steels, rostfreier Stahl and heat‑resistant superalloys or titanium components. The tolerance class M supports close dimensional repeatability in assemblies where consistency matters. Together, the geometry, robust corner form and coating deliver measurable productivity benefits: longer tool life, reduced changeover frequency and improved surface consistency, helping to lower overall process costs while maintaining quality standards. For specific application recommendations or availability of Walter Tools Tiger·tec Gold inserts like the ADMT080308L‑F56 WSP45G, contact Metav Werkzeuge for expert machining advice and rapid supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: ADMT080308L-F56-WSP45G-WALTER Part designation: ADMT080308L-F56 Brand: Walter Tools Product type: indexable milling insert Grade/sort: WSP45G Facts Corner radius: 0.8 mm Clearance angle: 15° Plate thickness: 3 mm Plate size designation: 08 Special features Coating: Tiger·tec Gold (PVD) Material groups: P / M / S (steel, rostfreier Stahl, superalloys/titanium) Geometry: parallelogram 85° Chipbreaker: F56 Tolerance class: M Series: Tiger‑tec Gold Execution/format: T Manufacturer: Walter Tools FAQ Which materials is this insert suitable for? The ADMT080308L‑F56 WSP45G insert is specified for the P / M / S ISO groups, meaning it is suitable for steel, rostfreier Stahl (stainless steel) and heat‑resistant superalloys/titanium when used with appropriate cutting data. What are the core benefits of the Tiger·tec Gold coating? Tiger·tec Gold offers enhanced thermal resistance and wear protection via PVD technology, which increases tool life and maintains cutting edge integrity during prolonged milling operations with the ADMT080308L‑F56 WSP45G. How does the parallelogram 85° geometry affect milling? The parallelogram 85° form provides a secure tool engagement and favourable cutting direction for face and shoulder milling, improving stability and contributing to repeatable process results when using this Walter Tools insert. Is the corner radius suitable for finishing work? The 0.8 mm corner radius balances edge strength and surface finish capability; it is robust for semi‑finishing and can produce reliable results in many finishing passes with correctly adjusted parameters. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand name Walter Tools) is one of the world’s leading manufacturers of precision cutting tools. Protected trademarks and product names mentioned are the property of their respective owners and are used here for clarification only. There is no affiliation between Metav Werkzeuge and the trademark owners. The offered item is original, factory‑new merchandise from the manufacturer.
ADMT080308R-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating and the WKP35G grade for extended tool life and consistent machining results; the optimised F56 chipbreaker ensures controlled chips when cutting steel and cast iron, supporting reliable productivity — order through Metav Werkzeuge or consult our specialists for application advice. ADMT080308R-F56 WKP35G – Tiger·tec Gold-coated milling indexable insert (Parallelogram 85°) by Walter Tools The ADMT080308R-F56 WKP35G is a parallelogram-shaped milling indexable insert designed for efficient roughing and medium-finishing in steel and cast iron machining applications. Tiger·tec Gold coating for high tool life Optimised F56 chipbreaker for controlled chips Parallelogram 85° shape for enhanced stability Suitable for steel and cast iron machining Consistent productivity when machining steel and cast iron The combination of the WKP35G grade and Tiger·tec Gold coating provides a resilient cutting edge tailored to the thermal and abrasive conditions typical of machining P and K workpiece groups. This means fewer indexings and longer operational cycles, which translates into measurable gains in process efficiency. The insert’s geometry delivers a dependable engagement angle that supports stable cutting forces and helps to maintain component tolerances during extended runs. Controlled chip formation and longer tool life The F56 chipbreaker is engineered to produce short, manageable chips across a range of feeds and depths, improving chip evacuation and reducing rework risks. The coating system offers enhanced wear resistance and edge stability under cyclic loads, lowering the frequency of tool changeovers. As a result, cycle times are optimised and operating costs per part are reduced while surface quality remains consistent. Practical geometry for robust clamping and easy handling The parallelogram form with an 85° main cutting face and a 15° clearance angle supports predictable cutting behaviour and good fixture compatibility in many face and shoulder milling cutters. The 0.8 mm corner radius balances strength and profile fidelity for common roughing and semi-finishing tasks. Technical support and specification matching are available from Metav Werkzeuge for integration into existing toolholders and machining strategies, ensuring quick adoption on the shop floor. Contact Metav Werkzeuge for tailored application advice and to source Walter Tools inserts with Tiger·tec Gold coating — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADMT080308R-F56-WKP35G-WALTER SKU: ADMT080308R-F56-WKP35G-WALTER Product type: Fräswendeschneidplatte / milling indexable insert Manufacturer: Walter Tools Grade: WKP35G Series: Tiger-tec Gold Core data Clearance angle: 15° Corner radius: 0.8 mm Insert size code: 08 Thickness code: 03 Shape angle: Parallelogram 85° Special features Coating: Tiger·tec Gold Chipbreaker: F56 Material class: P / K (steel and cast iron) Tolerance class: M Execution: T FAQ What materials is this insert suited for? The ADMT080308R-F56 WKP35G from Walter Tools is specified for P (steel) and K (cast iron) workpiece groups according to the grade’s design characteristics. How does the F56 chipbreaker affect machining? The F56 chipbreaker on the ADMT080308R-F56 WKP35G improves chip control and evacuation, producing short chips that ease handling and reduce the risk of re-cutting, which benefits cycle consistency. Is the insert compatible with standard ADMT 08 toolholders? The insert’s ADMT080308R-F56 designation corresponds to the common ADMT 08 indexable family and is intended for holders that accept the ADMT0803 format; verification with the chosen toolholder is recommended. What performance benefits does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WKP35G grade enhances wear resistance and edge robustness under typical steel and cast iron cutting conditions, extending effective tool life and stabilising machining results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, brand-new product from the manufacturer.
ADMT080308R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of a high-performance, coated carbide solution that combines consistent tool life and reliable chip control for productive milling of steel and cast iron; order through Metav Werkzeuge or consult their technical team for application-specific advice. ADMT080308R-F56 WKP35S milling insert, parallelogram 85° for steel and cast iron — Walter Tools The ADMT080308R-F56 WKP35S is a coated carbide milling insert engineered for heavy-duty and finishing operations in steel and cast iron, offering stable cutting behaviour and reliable repeatability in industrial machining. Tiger·tec Silver coated carbide WKP35S Parallelogram 85° form for flexible indexing F56 chipbreaker for controlled swarf formation 15° relief angle and 0.8 mm corner radius Consistent, high-productivity machining for steels and cast iron The Tiger·tec Silver WKP35S grade combines a coated carbide substrate with a tailored surface finish to balance wear resistance and toughness, which translates into predictable tool life during continuous milling. Designed for the demands of group P (steel) and group K (cast iron) according to ISO categorisation, this insert provides wear control under the heat and abrasion typical of these materials. As a result, process planners can expect fewer tool changes and improved machine uptime, which supports higher throughput without sacrificing surface quality. Stable cutting performance and improved process security The F56 chipbreaker geometry promotes short, consistent chips and reduces the risk of built-up edge, while the parallelogram 85° plate form enables multiple indexing positions for economical use of each insert. Combined with the 15° relief, this geometry reduces cutting forces and enhances engagement stability. These design choices make the insert suited to varying depths of cut and feed rates, offering machinists a robust option for both roughing and semi-finishing strategies where process security and repeatability are required. Practical design details that reduce machining time A 0.8 mm corner radius and the plate thickness provide a compromise between edge strength and fine surface generation, allowing for both moderate finishing cuts and demanding material removal when required. The medium tolerance class (M) ensures consistent fit in standard toolholders, helping to maintain concentricity and minimise vibration. Overall, the combination of grade, chip control, and geometric features reduces rework and supports streamlined set-up procedures on series production or job-shop environments. Shop-floor benefits and application advice Thanks to the coated carbide technology and dedicated chipbreaker, the insert supports reliable machining across a broad range of steels and cast irons, including alloyed grades commonly used in industrial components. The insert’s multi-edge indexing and stable edge behaviour make it a cost-effective choice for both batch and continuous operations. For best results, pair the insert with a matching Walter Tools milling cutter body rated for parallelogram-form inserts and adapt cutting parameters to the workpiece material and machine capability to fully exploit the Tiger·tec Silver advantages. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools Tiger·tec Silver inserts and to confirm stock and delivery options Technical data SKU: ADMT080308R-F56-WKP35S-WALTER Designation: ADMT080308R-F56 WKP35S Product type: Milling insert Manufacturer: Walter Tools Numeric specifications Plate size: 08 Plate thickness: 03 Relief angle: 15° Corner radius: 0.8 mm Plate form: Parallelogram 85° Chipbreaker: F56 Tolerance class: M Design & features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Material applicability: Steel (P), Cast iron (K) Execution: T Suitable for roughing and semi-finishing operations FAQ What materials is this insert designed for? The ADMT080308R-F56 WKP35S insert is intended for machining steel (group P) and cast iron (group K) using the Tiger·tec Silver coated carbide grade. How does the F56 chipbreaker affect machining? The F56 chipbreaker on this Walter Tools insert promotes short, controllable chips and reduces built-up edge formation, improving surface finish and process stability. Is the insert suitable for finishing passes? Yes, the 0.8 mm corner radius and the insert geometry allow for semi-finishing and finishing cuts where a balance of edge strength and surface quality is needed. How many effective cutting edges are available per insert? The parallelogram 85° form and indexed design permit multiple repositions of the cutting edge, extending usable life per insert and improving overall economy. Which series and coating technology does this insert use? This insert belongs to the Tiger·tec Silver series and uses the WKP35S coated carbide grade for enhanced wear resistance and toughness. Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only and indicate no affiliation with our company. The offered article is an original, factory-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com