ADMT080308R-F56 WSM35G Tiger-tec Gold Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold technology and the WSM35G coated carbide grade for secure chip control and long tool life when machining stainless steels and heat‑resistant superalloys; order directly via Metav Werkzeuge or consult the specialists for application support. ADMT080308R-F56 WSM35G milling indexable insert — Tiger·tec Gold coated, for stainless steel and superalloys | Walter Tools The ADMT080308R-F56 WSM35G is a parallelogram 85° milling insert with a 15° clearance angle, engineered for productive machining of rostfreier Stahl and heat‑resistant superalloys and titanium. Tiger·tec Gold coated carbide grade WSM35G Designed for stainless steel and superalloys Parallelogram 85° form with 15° clearance Reliable cutting on difficult-to-machine alloys The WSM35G grade, part of the Tiger·tec Gold family, combines a coated carbide substrate with a multilayer surface treatment to improve thermal resistance and edge stability. This makes the insert particularly suited to materials classified as M (rostfreier Stahl) and S (heat‑resistant superalloys and titanium) under ISO 513. The result is more consistent chip formation and fewer built‑up edges during medium to high material removal, supporting stable cycle times and predictable tool life. Geometry that stabilises the cut and reduces rework A parallelogram 85° form paired with a 15° clearance angle provides axial and radial strength while enabling secure seating in milling cutters. The 0.8 mm corner radius improves edge endurance and helps absorb occasional micro‑impacts, reducing the risk of premature edge breakage. These geometric choices translate directly into fewer interrupted cuts, improved surface finish and reduced secondary processing. Chip control and process security for industrial production The F56 chipbreaker is tuned to promote short, controllable chips when cutting sticky or work‑hardening materials. Combined with the WSM35G coating, chip evacuation is improved, lowering the chance of chip re-cutting and tool damage. For operations focused on throughput and repeatability, this combination supports higher process stability and consistent part quality across shifts. Practical specification guidance for tool selection The insert is offered in the ADMT080308R‑F56 footprint and is classified in tolerance M, suitable for robust mounting and reliable indexability. Thickness is indicated as 03, and the nominal plate size is 08, enabling compatibility checks against matching cutter bodies. When integrating this insert into a milling tool, selecting a holder that secures the parallelogram form and locates the seat accurately will preserve the designed cutting geometry and deliver the expected performance. For application advice on the Walter Tools Tiger·tec Gold WSM35G inserts or to discuss the best insert geometry for a specific rostfreier Stahl or superalloy task, contact Metav Werkzeuge for tailored recommendations and quick delivery. Technical Data Article number: ADMT080308R-F56-WSM35G-WALTER Designation: ADMT080308R-F56 WSM35G Brand: Walter Tools Series: Tiger·tec Gold Facts Clearance angle: 15° Corner radius: 0.8 mm Plate size: 08 Thickness: 03 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WSM35G (coated carbide) Plate form: Parallelogram 85° Chipbreaker: F56 Material suitability: S / M Execution: T FAQ What materials is this insert intended for? The ADMT080308R‑F56 WSM35G insert is designed primarily for rostfreier Stahl (M) and for heat‑resistant superalloys and titanium (S), reflecting the properties of the WSM35G grade. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WSM35G grade increases thermal resistance and edge robustness, improving tool life and chip control when machining demanding alloys. How does the geometry affect machining stability? The parallelogram 85° form with a 15° clearance angle and a 0.8 mm corner radius provides mechanical strength and edge support, which reduces the risk of edge chipping and improves surface finish. Is this insert suitable for high‑speed milling? The coated carbide grade and the F56 chipbreaker are engineered to support elevated cutting conditions; final cutting parameters should be set according to machine capability and workpiece properties. Which cutter bodies are compatible with this insert? The insert matches cutter bodies and toolholders that accept the ADMT080308R‑F56 geometry and support a parallelogram 85° insert form; compatibility should be verified against the holder's seating and clamping design. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is a leading manufacturer of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners. Mention of brand names is for explanation only and does not imply any affiliation between our company and those manufacturers.
ADMT080308R-F56 WSM35S WSM35S Wendeplatten - Walter Tools
Benefit from the combination of proven Tiger·tec Silver coating, reliable chip control and a robust corner geometry for uninterrupted production; order the ADMT080308R-F56 WSM35S milling insert directly via Metav Werkzeuge or ask our consultants for application advice. ADMT080308R-F56 WSM35S milling insert for stainless steels and superalloys — Walter Tools The ADMT080308R-F56 WSM35S is a coated carbide indexable insert optimised for milling stainless steels and heat‑resistant superalloys and titanium, combining thermal stability and secure chip formation for demanding production environments. Tiger·tec Silver coated carbide F56 chipbreaker for secure chip control 0.8 mm corner radius for robust edges Optimised for stainless and superalloys Reliable performance for challenging materials The Tiger·tec Silver coating and the WSM35S grade provide a balance of hardness and toughness that supports stable cutting when machining stainless steels and heat‑resistant materials. This results in consistent tool life and predictable wear behaviour, which reduces the need for frequent tool changes. For operations where heat builds up and built‑up edge is likely, the coated carbide composition helps maintain a sharp cutting edge and lowers the risk of edge failure, improving overall process reliability. Stable chip control to reduce downtime Equipped with the F56 chipbreaker, the insert enables controlled chip formation across a wide range of feeds and depths of cut. Predictable chips minimise interruptions at the machine and decrease the load on chip evacuation systems. The combination of geometry and chipbreaker design is particularly effective when processing ductile, work‑hardening stainless steels, where poor chip control would otherwise cause frequent stoppages and manual intervention. Robust cutting edge for extended service life A 0.8 mm corner radius and the parallelogram 85° seat geometry contribute to a resilient cutting edge that resists chipping under intermittent or heavy engagement. The 15° relief angle supports edge stability while allowing for effective cutting action on demanding alloys. These features translate into fewer indexings and a reduced tooling footprint over production cycles, supporting higher productivity and lower tooling consumption. Seamless integration into standard milling toolholders The insert size and shape are compatible with common milling bodies that accept parallelogram inserts; this allows straightforward replacement and fast set‑up during tool changes. Material suitability markings for groups M (stainless steels) and S (heat‑resistant superalloys and titanium) help planners select the correct grade for job orders, simplifying tool management and reducing trial phases when introducing new components to production. Contact Metav Werkzeuge for tailored application support and recommendations on Walter Tools inserts, including process parameters and suitability checks: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: ADMT080308R-F56-WSM35S-WALTER Designation: ADMT080308R-F56 Grade: WSM35S Series: Tiger·tec Silver Manufacturer: Walter Tools Facts Thickness: 03 Size: 08 Relief angle: 15° Corner radius: 0.8 mm Tolerance class: M Special features Coating / grade: Tiger·tec Silver / WSM35S (coated carbide) Chipbreaker: F56 Insert form: Parallelogram 85° Material suitability: stainless steels (M), superalloys and titanium (S) Execution: T FAQ What materials is this insert suitable for? The ADMT080308R-F56 WSM35S insert is designed for stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), offering thermal stability and controlled chip formation. How does the F56 chipbreaker affect machining? The F56 chipbreaker promotes secure chip control and consistent chip shape during milling, reducing machine stoppages and improving chip evacuation when processing ductile or heat‑sensitive materials. What benefit does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WSM35S grade enhances wear resistance and edge durability under elevated temperatures, which supports longer tool life and steadier surface finish in demanding operations. Can this insert be used in standard parallelogram milling holders? Yes, the insert’s parallelogram 85° form is compatible with common milling toolholders designed for this geometry, enabling straightforward replacement and set‑up. What corner radius is available and why does it matter? This grade features a 0.8 mm corner radius, which strengthens the cutting edge against chipping and is beneficial for interrupted cuts and heavy engagement operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanation. There is no connection between our company and the named brands. The offered article is original, brand‑new goods from the manufacturer Walter Tools.
ADMT080308R-F56 WSP45G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger‑tec Gold coating and the WSP45G grade for reliable chip control and extended edge life; the robust 0.8 mm corner radius and Parallelogram 85° geometry ensure stable milling even in demanding materials. Order the ADMT080308R-F56 WSP45G milling insert directly via Metav Werkzeuge or ask our consultants if needed. ADMT080308R-F56 WSP45G milling insert — Parallelogram 85°, 15° rake (Walter Tools) ADMT080308R-F56 WSP45G is a coated indexable milling insert designed for versatile milling of steels, stainless steels and heat‑resistant superalloys Tiger‑tec Gold PVD coating Suitable for steel, stainless steel, superalloys Parallelogram 85° geometry, 15° rake 0.8 mm corner radius for cutting stability Stable chip formation for consistent machining results The Tiger‑tec Gold PVD coating in combination with the WSP45G grade produces a balance between wear resistance and edge toughness that benefits both roughing and semi‑finishing operations. The coated carbide substrate supports predictable chip control and reduced wear rates when machining steels (P), stainless steels (M) and superalloys/titanium (S). Explaining the term: PVD (physical vapour deposition) is a thin, hard layer applied to the cutting edge to improve heat resistance and reduce adhesion; this means fewer unplanned tool changes and more consistent component quality during batch production. Geometry that improves accessibility and edge strength The insert’s Parallelogram 85° geometry and 15° rake deliver a combination of good accessibility for shoulder and slot milling with an optimised cutting angle that reduces cutting forces. The 0.8 mm corner radius increases edge stability, allowing slightly higher depths of cut without premature chipping, while the compact designation (size 08, thickness 03) helps when working in tighter tool pockets. For users unfamiliar with insert dimensions: size and thickness codes indicate the insert’s nominal dimensions for matching with compatible toolholders and cutters. Economical performance through process security With a tolerance class M and the robust WSP45G composition, this insert offers process security and repeatable tool life that supports predictable cycle times. The chipbreaker F56 is tuned to promote controlled chip segmentation across a broad range of feeds, which lowers the risk of built‑up edge and improves surface finish in consecutive parts. As a result, productivity increases and scrap rates fall—advantages that quickly translate into tangible gains on the shop floor. The insert is part of Walter Tools’ Tiger‑tec Gold series, known for broad material coverage and consistent, repeatable performance. For reliable Tiger‑tec Gold performance and advice on integration into existing tool systems, contact Metav Werkzeuge — Metav’s technical team can advise on toolholder compatibility and delivery options Technical Data Article number: ADMT080308R-F56-WSP45G-WALTER Label: Fräswendeschneidplatte ADMT080308R-F56 WSP45G Walter Tools Manufacturer: Walter Tools Facts Size: 08 Thickness: 03 Corner radius: 0.8 mm Free rake angle: 15° Geometry angle: Parallelogram 85° Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WSP45G Chipbreaker: F56 Coating: PVD coated carbide Suitable for: Steel (P), Stainless steel (M), Superalloys/Titanium (S) Execution: T FAQ What materials is this insert suitable for? The ADMT080308R-F56 WSP45G insert is suitable for steel, stainless steel and heat‑resistant superalloys/titanium, thanks to the Tiger‑tec Gold PVD technology and the WSP45G grade. How does the Tiger‑tec Gold coating improve performance? Tiger‑tec Gold on the ADMT080308R-F56 WSP45G increases heat resistance and reduces adhesion on the cutting edge, resulting in better wear behaviour and more consistent tool life in demanding milling tasks. What benefit does the Parallelogram 85° geometry offer? Parallelogram 85° geometry provides good approach angles for shoulder and slot milling while maintaining edge strength; in the ADMT080308R-F56 design this supports tighter tool access and stable cutting. Is the 0.8 mm corner radius suitable for finishing? The 0.8 mm corner radius on the ADMT080308R-F56 WSP45G gives improved edge robustness for semi‑finishing and finishing when combined with appropriate feeds and speeds, reducing the likelihood of chipping. Which chipbreaker should be expected and what does it do? This insert features chipbreaker F56, which promotes controlled chip segmentation across a range of feeds to improve surface finish and reduce built‑up edge during continuous milling. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes and do not indicate any affiliation between our company and the named brands. The offered item is an original, factory‑new product of Walter Tools.
ADMT080312R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of a Tiger·tec Silver coated grade that combines wear resistance and broad material capability with a stable parallelogram 85° geometry and a chipbreaker F56 for reliable chip control; order directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. ADMT080312R-F56 WKP35S indexable milling insert — Parallelogram 85°, 15° clearance (Walter Tools, Tiger·tec Silver) ADMT080312R-F56 WKP35S is an indexable milling insert designed for productive machining of steel and cast iron, offering a coated carbide grade and robust chip control for mixed finishing and medium-duty roughing operations. Tiger·tec Silver coating technology Grade WKP35S for steel and cast iron Parallelogram 85° geometry for stable cutting 1.2 mm corner radius, 15° clearance angle Maximise process efficiency with a coated carbide grade built for steel and cast iron The combination of Tiger·tec Silver coating and the WKP35S grade delivers a balance of thermal resistance and wear protection, specifically optimised for machining steel (P) and cast iron (K). The coated carbide composition reduces flank wear under the typical heat loads of steel turning and milling, which translates into longer tool life and fewer index changes. For production environments where predictable tool performance is essential, this insert supports consistent cycle times and reduced downtime, helping to maintain throughput on both unmanned shifts and busy cell lines. Geometry and chip control that improve surface finish and stability The parallelogram 85° form combined with a 15° clearance angle and 1.2 mm corner radius provides mechanical rigidity and favourable engagement angles during milling, which reduces vibration and improves surface quality. The integrated chipbreaker F56 is tuned for controlled chip formation when cutting mixed components, preventing chip nests and enhancing evacuation in both long and short-chip conditions. These geometric features result in stable cutting behaviour, allowing higher material removal rates with predictable edge life and improved dimensional repeatability. Practical selection and in-process advantages for everyday workshop use Available in size 08 with a plate thickness of 03 and manufactured to tolerance class M, this insert suits a wide range of milling holders and clamping systems. The insert’s combination of grade and geometry makes it suitable where both finishing and moderate roughing passes are required on steel and cast iron components. For users uncertain about clamping options or the best chipbreaker for a specific cycle, Metav Werkzeuge provides application advice and can help match the insert to suitable cutter bodies and process parameters to ensure optimal productivity and tool economy. Contact Metav Werkzeuge for tailored recommendations on Walter Tools ADMT080312R-F56 WKP35S inserts, application guidance and delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ADMT080312R-F56-WKP35S-WALTER Item: ADMT080312R-F56 WKP35S indexable milling insert Manufacturer: Walter Tools Facts Corner radius: 1.2 mm Clearance angle: 15° Insert size: 08 Plate thickness: 03 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Chipbreaker: F56 Geometry: Parallelogram 85° Material application: Steel (P) and Cast iron (K) Execution: T FAQ Which materials is this insert designed for? The ADMT080312R-F56 WKP35S insert is formulated for machining steel (P) and cast iron (K); the Tiger·tec Silver coating and WKP35S grade are optimised for the thermal and abrasive conditions typical of these material groups. What cutting tasks suit the chipbreaker F56? Chipbreaker F56 provides controlled chip formation for a range of finishing to medium roughing operations and helps maintain stable evacuation when machining mixed components with varying chip characteristics. How does the parallelogram 85° geometry benefit production? The parallelogram 85° shape increases cutting edge support and reduces undesirable deflection, improving surface finish and repeatability during milling cycles, which is especially beneficial in serial production. Can Metav Werkzeuge advise on holder compatibility and process parameters? Yes — Metav Werkzeuge offers application support and can advise on suitable cutter bodies, clamping systems and process settings for the ADMT080312R-F56 WKP35S insert to optimise tool life and productivity. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT080312R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of high-temperature resistance, stable chip control and precise geometry for consistent milling results; order directly via Metav Werkzeuge or request advice from our consultants if needed. ADMT080312R-F56 WSM35G – Walter Tools milling indexable insert, Tiger·tec Gold for rostfreier Stahl and superalloys, 15° clearance The ADMT080312R-F56 WSM35G is a parallelogram 85° milling insert designed for demanding roughing and semi-finishing tasks in rostfreier Stahl and heat-resistant superalloys *Tiger·tec Gold coating for high temperature resistance *Suitable for rostfreier Stahl and superalloys *Parallelogram 85° form for versatile milling *15° clearance and 1.2 mm corner radius Maximise cutting performance with a heat-resistant coating The insert's Tiger·tec Gold surface treatment and WSM35G grade combine to deliver improved thermal stability and wear resistance when machining difficult-to-cut alloys. Coated cemented carbide technology reduces adhesion and supports a stable chip formation, which lowers the risk of built-up edge and preserves the cutting edge over longer production runs. For operations where temperature and workhardening challenge tool life, this combination provides a reliable balance between aggressive metal removal and predictable consumable intervals. Geometry that reduces cutting forces and improves tool life The parallelogram 85° format and a 15° clearance angle create a favourable cutting geometry for both face and shoulder milling. The 1.2 mm corner radius contributes to edge robustness and distributes cutting loads to avoid premature chipping during interrupted cuts. These geometry choices result in consistent component quality, a controlled surface finish and reduced tool-change frequency—advantages that translate into fewer process disruptions and higher throughput on the shop floor. Designed for process reliability in production environments Developed for applications in ISO groups M (rostfreier Stahl) and S (superalloys/titanium), this insert supports manufacturers who require repeatable results when machining high-alloy parts. The integrated F56 chipbreaker promotes controllable chips and eases swarf handling, which helps maintain machine uptime. Combining predictable wear behaviour with a stable cutting edge, the insert suits production-focused milling tasks where efficiency, reproducibility and component quality are priorities. For demanding rostfreier Stahl and superalloy milling tasks, consult Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and ordering assistance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: ADMT080312R-F56-WSM35G-WALTER Designation: ADMT080312R-F56 WSM35G Manufacturer: Walter Tools Type: Milling indexable insert Facts Clearance angle: 15° Corner radius: 1.2 mm Plate form: Parallelogram 85° Plate size: 08 Plate thickness: 03 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WSM35G Chipbreaker: F56 Material suitability: rostfreier Stahl (M), Superalloys/Titan (S) Series: Tiger-tec Gold Execution: T FAQ Which materials is this insert best suited for? The ADMT080312R-F56 WSM35G insert is optimised for rostfreier Stahl and heat-resistant superalloys (ISO groups M and S), delivering improved edge life under high temperatures. Can the insert handle interrupted cuts and heavy milling? Yes, the combination of the 1.2 mm corner radius and the parallelogram 85° form provides edge robustness and load distribution suitable for interrupted cutting and semi-heavy milling operations. What benefit does the Tiger·tec Gold coating provide? Tiger·tec Gold increases thermal resistance and wear performance, enabling the insert to maintain a stable cutting edge during long cycles when machining high-alloy materials. Is the chip control suitable for automated production cells? The F56 chipbreaker promotes predictable chip formation, which supports swarf management and reduces the risk of chip-related interruptions in automated machining processes. Which toolholders fit this indexable insert form? The parallelogram 85° geometry is compatible with toolholders designed for ADMT-style inserts; consult Metav Werkzeuge for matching holder recommendations and clamping specifications. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
ADMT080312R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, stable chip control and versatile material capability for reliable milling cycles; order the ADMT080312R-F56 WSP45G directly via Metav Werkzeuge or contact our consultants for application support. ADMT080312R-F56 WSP45G milling insert (Tiger‑tec Gold) by Walter Tools — for Stahl, rostfreier Stahl and superalloys The ADMT080312R-F56 WSP45G is a parallelogram milling insert engineered for productive side and face milling of Stahl, rostfreier Stahl and heat-resistant superalloys in demanding production environments. Tiger‑tec Gold PVD coating Versatile for Stahl, rostfreier Stahl, superalloys Parallelogram 85° geometry, 15° clearance Corner radius 1.2 mm for increased edge strength Engineered coating for extended cutting intervals The combination of the Tiger‑tec Gold surface treatment and the WSP45G carbide grade delivers a measurable increase in tool life and repeatable performance under continuous operation. The PVD-based PVD coating resists thermal and abrasive wear, which reduces flank wear and supports consistent component tolerances over longer tool life. For production planners this translates into fewer indexings, lower tooling consumption and reduced downtime between tool changes — improving line efficiency without sacrificing surface finish. Stable chip formation and process security across materials Designed for the ISO P/M/S material groups, this insert supports machining of unalloyed and alloyed Stahl, tougher rostfreier Stahl and heat-resistant alloys or titanium. The integrated chipbreaker F56 promotes controlled chip formation, reducing rework risks and facilitating safe evacuation even at elevated cutting temperatures. The result is predictable material removal rates and improved surface integrity when milling parts that demand high reproducibility. Geometry that improves access and edge life The parallelogram, 85° approach geometry combined with a 15° relief angle gives a good balance between cutting engagement and radial force management, making the insert suitable for shoulder milling and face milling tasks. The corner radius 1.2 mm improves edge stability under interrupted cuts and supports increased edge strength, while the standard thickness 03 provides robustness for heavier engagements. These geometric choices help maintain dimensional stability on critical features while enabling productive cutting parameters. Practical integration for production systems The insert is available in the ADMT080312R-F56 designation, matching common toolholders for indexable milling operations. The compact shape and proven coating technology make it straightforward to substitute into existing tool cycles where improved chip control and wear resistance are required. Specification data such as tolerance class M and the WSP45G grade enable reliable process planning and repeatable tool life estimation for batch production and job-shop environments. For tailored cutting data, availability checks and application advice, contact Metav Werkzeuge — our specialists will advise on the Walter Tools ADMT080312R-F56 WSP45G milling insert and confirm suitability for the specific Stahl or rostfreier Stahl application Technical data Article number: ADMT080312R-F56-WSP45G-WALTER Designation: ADMT080312R-F56 WSP45G Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger‑tec Gold Facts Relief angle: 15° Corner radius: 1.2 mm Plate size: 08 Thickness: 03 Approach angle: 85° Tolerance class: M Special features Grade: WSP45G (coated carbide) Coating technology: Tiger‑tec Gold (PVD) Chipbreaker: F56 Geometry: Parallelogram 85° Execution: T Material suitability: P / M / S Purpose: milling insert for productive machining FAQ What materials is this insert suitable for? The ADMT080312R-F56 WSP45G insert is suitable for Stahl, rostfreier Stahl and heat-resistant superalloys (ISO groups P, M, S) thanks to the WSP45G grade and Tiger‑tec Gold coating. How does the chipbreaker F56 affect machining? The chipbreaker F56 promotes consistent chip formation and evacuation; when paired with the WSP45G grade this improves process security and reduces the risk of built-up edge on rostfreier Stahl. What is the advantage of the parallelogram 85° geometry? The 85° parallelogram geometry reduces radial cutting forces and improves access for shoulder and face milling operations, helping to maintain dimensional stability on critical features. Can this insert handle interrupted cuts and heavier engagements? Yes. The corner radius of 1.2 mm and the robust thickness provide enhanced edge strength and resistance to fracture during interrupted cuts and higher material removal rates. Which coating technology is used and why does it matter? The Tiger‑tec Gold PVD coating on the WSP45G grade enhances thermal and abrasive wear resistance, contributing to longer tool life and more consistent surface finish across production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT080316R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of longer tool life and reliable chip control to improve milling productivity; order directly via Metav Werkzeuge or contact our consultants for application advice. ADMT080316R-F56 WKP35S milling insert — Tiger-tec Silver, parallelogram 85° The ADMT080316R-F56 WKP35S is a coated milling insert designed for productive steel and cast iron machining, offering controlled chip formation and stable cutting performance. Tiger-tec Silver for enhanced tool life F56 chipbreaker for controlled chips Parallelogram 85° for stable engagement Suitable for steel and cast iron machining Enhanced uptime through advanced coating and grade The combination of the Tiger-tec Silver coating and the WKP35S grade delivers a notable improvement in abrasive and thermal resistance for coated carbide applications. This results in more consistent edge life under varying cutting conditions and reduces the frequency of tool changes, which supports uninterrupted production cycles. The coated carbide composition is optimised for the typical heat and chip behaviour encountered when machining steel, allowing for sustained high-clock productivity without compromising surface finish. Accurate engagement and predictable chip behaviour The parallelogram 85° geometry and the dedicated F56 chipbreaker provide a measured cutting engagement that stabilises the cutting edge and promotes short, segmenting chips when machining cast iron and steel. The 15° relief angle and a 1.6 mm corner radius combine to balance strength and sharpness, so each indexable edge gives a reliable cutting profile. These design elements reduce vibration and improve repeatability, meaning fewer rejects and a more predictable machining process. Practical benefits for workshop efficiency With a compact plate format (size 08, thickness 03) and tolerance class M, the insert supports accurate indexation and straightforward changeover routines. The classification for P / K materials means the insert is specified for unalloyed/low-alloy steels and various forms of cast iron, aiding versatility across many production tasks. The overall specification emphasises operational efficiency: stable chip formation, consistent surface quality and a carbide grade that resists abrasive wear, which together contribute to lower cost per part and a more productive tool inventory. Contact Metav Werkzeuge today for project-matched recommendations on the Tiger-tec Silver ADMT080316R-F56 WKP35S insert and for delivery or technical clarification via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: ADMT080316R-F56-WKP35S-WALTER Article designation: ADMT080316R-F56 WKP35S Series: Tiger-tec Silver Grade: WKP35S Manufacturer: Walter Tools Core figures Relief angle: 15° Corner radius: 1.6 mm Plate size: 08 Plate thickness: 03 Tolerance class: M Materials & features Applicable material groups: P (steel), K (cast iron) Chipformer / chipbreaker: F56 Plate shape: Parallelogram 85° Execution: T FAQ What materials is this insert suitable for? The ADMT080316R-F56 WKP35S is specified for steel (P) and cast iron (K) applications and is optimised for the thermal and abrasive conditions typical of those groups. How does the Tiger-tec Silver coating benefit production? The Tiger-tec Silver coating enhances wear resistance and thermal stability, extending the service life of the insert and supporting consistent surface quality during extended runs. What chip control can be expected from the F56 breaker? The F56 chipbreaker produces short, controlled chips in steels and many cast irons, improving evacuation and reducing the risk of built-up edge or re-cutting. Is the insert suitable for heavy roughing? With a 1.6 mm corner radius and a robust parallelogram geometry, the insert offers good edge strength for demanding roughing, while still providing finish-capable edges when indexation is required. How is tool repeatability assured? The plate’s tolerance class M and standardised dimensions ensure precise positioning and repeatable cutting geometry when indexed or replaced. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names are used solely for description and identification purposes. The offered item is an original, factory-new product from the stated manufacturer.
ADMT080316R-F56 WSM35G T Wendeplatten - Walter Tools
The combination of Tiger·tec Gold wear resistance, the WSM35G grade and the F56 chipbreaker delivers reliable cutting performance in demanding materials; predictable chip formation and a 15° clearance angle reduce downtime and support consistent part quality. Order the ADMT080316R-F56 WSM35G directly via (Metav Werkzeuge) or ask our consultants if needed. ADMT080316R-F56 WSM35G milling insert — Tiger·tec Gold, 15° clearance (Walter Tools) ADMT080316R-F56 WSM35G is a parallelogram 85° milling insert engineered for machining rostfreier Stahl and heat‑resistant superalloys, offering a coated carbide grade optimised for stable cutting in challenging alloys. *Tiger·tec Gold coating for extended tool life *Stable chip control with chipbreaker F56 *15° clearance for secure cutting *Parallelogram 85° form for positive milling Engineered for tough alloys and rostfreier Stahl This insert’s WSM35G carbide grade, combined with the Tiger·tec Gold coating, is designed for machining rostfreier Stahl (M) and heat‑resistant superalloys and titanium (S). The coating improves heat resistance and reduces flank wear, which supports longer tool life and consistent dimensional results when cutting materials that tend to work‑harden or generate high cutting temperatures. In practice, these properties help to limit build‑up on the cutting edge and maintain cutting performance over longer cycles, reducing tool changes and stabilising production. Predictable chip formation and process security The integrated chipbreaker F56 and the parallelogram 85° plate geometry support controlled chip separation and evacuation when milling difficult materials. Combined with the 15° clearance, the geometry reduces rubbing and favours a stable cutting edge under heavy thermal load. The 1.6 mm corner radius provides strength at the cutting edge for interrupted cuts and roughing passes while preserving surface integrity. These factors contribute to increased process security and reproducible results across batch runs. Practical integration and tooling guidance As an indexable milling insert in size 08 with thickness code 03 and tolerance class M, the component fits conventional Walter Tools cutter bodies that accept the ADMT‑form inserts. The insert’s parallelogram outline yields positive cutting angles beneficial for face and shoulder milling operations. For new applications, start with conservative feeds and progressively increase to determine the optimal balance between surface finish and productivity; technical data sheets from Walter Tools and Metav Werkzeuge can provide recommended cutting windows for specific machines and workpiece conditions. Life cycle advantages and operational benefits Using a coated grade such as WSM35G reduces wear rate and supports longer edge life compared with uncoated grades when machining high‑temperature alloys. The insert’s design focuses on stable chip control and edge integrity, which decreases scrap risk and increases uptime. Paired with correct clamping and coolant strategies, this solution improves overall process economics by extending insert life and delivering consistent component quality under demanding cutting conditions. For tailored recommendations and availability of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or phone +49 2822 7131930. Technical data Article number: ADMT080316R-F56-WSM35G-WALTER Designation: ADMT080316R-F56 WSM35G Manufacturer: Walter Tools Series: Tiger-tec Gold Core specifications Relief angle: 15° Corner radius: 1.6 mm Size: 08 Thickness code: 03 Tolerance class: M Chipbreaker: F56 Special features Coating: Tiger·tec Gold Grade: WSM35G Plate shape: Parallelogram 85° Material suitability: S / M Suitable for rostfreier Stahl (M) and heat‑resistant superalloys/titanium (S) FAQ What materials is this insert suited for? The ADMT080316R-F56 WSM35G insert is formulated for rostfreier Stahl (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), offering stable cutting in materials that generate high temperatures. How does the F56 chipbreaker benefit milling operations? The chipbreaker F56 promotes regular chip segmentation and evacuation, reducing the chance of entangling chips and improving surface finish when milling difficult alloys. What is the significance of the 85° parallelogram form? The parallelogram 85° outline provides a positive cutting approach suitable for face and shoulder milling, improving accessibility and allowing for favourable cutting angles in various tool holders. Is the insert compatible with standard Walter Tools cutter bodies? Yes, the insert’s ADMT form and size 08 / thickness code 03 are intended for cutter systems that accept ADMT‑style inserts; confirmation of seat and clamping compatibility is recommended for the specific cutter body. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating enhances heat and wear resistance of the WSM35G grade, typically extending edge life and maintaining cutting stability under thermally demanding conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Mark names are used for explanation of compatibility and origin only. The offered item is an original, factory‑new product of the named manufacturer (Walter Tools).
ADMT080316R-F56 WSM35S WSM35S Wendeplatten - Walter Tools
High productivity and reliable wear resistance make the ADMT080316R-F56 WSM35S a solid choice for demanding machining operations. The combination of the Tiger‑tec Silver coating and a robust geometry supports stable chip formation and extended tool life, enabling smoother production flow. Order the inserts directly via Metav Werkzeuge or consult the Metav team for application advice. ADMT080316R-F56 WSM35S – Indexable milling insert, Tiger‑tec Silver, 15° relief (Walter Tools) The ADMT080316R-F56 WSM35S is an indexable milling insert engineered for high-demand machining of stainless steels and heat‑resistant alloys, offering a wear‑resistant coating and a parallelogram seat for repeatable performance Tiger‑tec Silver coating for high wear resistance Designed for stainless steels and superalloys Parallelogram 85° shape for secure seating 1.6 mm corner radius, 15° relief angle Consistent edge life for tough materials The WSM35S grade, part of the Tiger‑tec Silver series, is a coated carbide designed specifically to handle the elevated temperatures and work‑hardening tendencies of stainless steels and heat‑resistant alloys. The coating improves heat resistance and reduces abrasive wear, which translates into longer edge life and fewer insert changes in series production. By stabilising the cutting edge and encouraging predictable chip formation, the insert supports higher cutting data where machining demands process security and repeatability. Geometry that secures the process and reduces downtime With a parallelogram 85° form and a 15° relief angle, the geometry of the insert ensures firm seating and a well‑defined cutting kinematic. The 1.6 mm corner radius balances robustness and surface finish, helping to absorb cutting forces without sacrificing the finish quality. These design choices reduce the frequency of interruptions for insert indexing and make the grade suitable for applications where tool life and component quality are equally critical. Practical advantages for workshop planning and productivity The combination of a proven coating technology and a purpose‑built chipbreaker provides stable chip control, which reduces the risk of built‑up edge and unexpected tool failure during heavy or interrupted cuts. The insert’s compatibility with standard milling cutter bodies and its clear ISO material group suitability (M and S) simplify process planning and tool selection. For production environments seeking to increase uptime and maintain consistent results, this solution offers measurable gains in both productivity and component quality. For reliable machining of stainless steels and superalloys, contact Metav Werkzeuge for Walter Tools ADMT080316R-F56 WSM35S inserts and application support via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: ADMT080316R-F56-WSM35S-WALTER Designation: ADMT080316R-F56 Product type: Indexable milling insert Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 1.6 mm Plate size: 08 Thickness code: 03 Tolerance class: M Plate form: Parallelogram 85° Special features Series: Tiger‑tec Silver Grade: WSM35S Chipbreaker: F56 Material suitability: stainless steels (M), heat‑resistant alloys / titanium (S) FAQ What materials is this insert suitable for? The ADMT080316R-F56 WSM35S insert is specified for stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), reflecting the grade’s heat‑resistant and wear‑resistant properties. How does the Tiger‑tec Silver coating benefit machining? The Tiger‑tec Silver coating on the WSM35S grade increases thermal resistance and reduces abrasive wear, which contributes to longer tool life and more consistent cutting performance under elevated temperatures. What is the advantage of the parallelogram 85° shape? The parallelogram 85° geometry provides a secure, repeatable seat in the cutter body, improving positional stability and enabling reliable indexability during production cycles. Which chipbreaker is fitted and what does it do? This insert uses the F56 chipbreaker, a configuration optimised for controlled chip formation in tough materials, reducing the risk of built‑up edge and improving surface integrity. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT080316R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating and a defined F56 chipbreaker for consistent chip control and extended tool life; the result is reliable, productive milling across steel, rostfreier Stahl, and heat-resistant alloys. Order the ADMT080316R-F56 WSP45G directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. ADMT080316R-F56 WSP45G — Fräswendeschneidplatte by Walter Tools (Tiger·tec Gold, chipbreaker F56) The ADMT080316R-F56 WSP45G is a parallelogram milling insert designed for versatile milling tasks, combining a wear-resistant PVD coating with a geometry optimised for stable chip formation in demanding materials. Tiger·tec Gold PVD coating Suitable for Stahl, rostfreier Stahl, and superalloys Parallelogram 85° geometry for axial engagement F56 chipbreaker for stable chips and surface quality Longer tool life and consistent wear resistance with Tiger·tec Gold The PVD-coated Tiger·tec Gold grade WSP45G provides a balanced combination of toughness and thermal stability, making it appropriate for a wide range of milling tasks. As a coated cemented carbide grade, it manages heat and abrasive wear better than uncoated grades, which translates into longer intervals between indexings and fewer tool changes. This behaviour is particularly advantageous in serial production, where predictable flank wear and repeatable performance reduce setup time and scrap rates. The material suitability designation P / M / S signals that this insert handles conventional steels, rostfreier Stahl, and even heat-resistant superalloys or titanium, so the same indexable solution may be applied across mixed production lots. Geometry that improves chip control and surface finish The insert’s parallelogram 85° shape and integrated F56 chipbreaker are designed to deliver controlled chip formation during shoulder milling and light ramping operations. A 15° clearance angle supports shearing action while protecting the cutting edge from rubbing, and the 1.6 mm corner radius enhances edge strength where intermittent engagement or higher feed rates are used. These geometric choices combine to reduce vibration sensitivity and help achieve consistent surface quality, meaning fewer rework steps and a more predictable machining cycle time for production shops and subcontractors alike. Process security, tolerance class and shop-floor productivity With a tolerance class of M and the characteristic robustness of a Walter Tools grade, this milling insert supports stable cutting conditions and repeatable positioning in multi-insert cutters. The execution code T and the plate thickness and size coding ensure compatibility with standard tooling systems that accept the ADMT080316R series. For operations where batch consistency and uptime matter, the insert’s balance of toughness and coating performance helps secure process windows and reduces the likelihood of unexpected tool failure. For abrasive or heat-prone workpieces, the grade’s technology aids in maintaining edge integrity over longer cycles, supporting more efficient use of machine time and operator oversight. Contact Metav Werkzeuge for tailored advice on Walter Tools inserts, quoting SKU ADMT080316R-F56-WSP45G-WALTER, or to discuss optimisation for specific materials; eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical data SKU: ADMT080316R-F56-WSP45G-WALTER Designation: ADMT080316R-F56 WSP45G Series: Tiger-tec Gold Product type: Fräswendeschneidplatte Grade: WSP45G Brand: Walter Tools Execution: T Tolerance class: M Facts Clearance angle: 15° Corner radius: 1.6 mm Plate thickness designation: 03 Plate size designation: 08 Plate form angle: 85° Special features Coating: Tiger·tec Gold (PVD) Chipbreaker type: F56 Suitable for: steel (P), rostfreier Stahl (M), superalloys / titanium (S) Shape: Parallelogram 85° Series description: coated cemented carbide, versatile milling grade FAQ Which materials can be machined with this insert? The ADMT080316R-F56 WSP45G by Walter Tools is specified for P / M / S applications — that is, steel, rostfreier Stahl, and heat-resistant superalloys or titanium — and performs well where toughness and thermal resistance are required. What machining tasks is the geometry best suited to? The parallelogram 85° form combined with the F56 chipbreaker is especially effective for shoulder milling and general face milling where controlled chip flow and good surface finish are priorities. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold increases wear resistance and thermal stability, which reduces flank wear and extends cutting life; this supports longer unattended cycles and improved batch consistency when using the ADMT080316R-F56 WSP45G. Is the insert suitable for high-feed operations? The combination of a 1.6 mm corner radius and the F56 chipbreaker provides robustness under higher feed rates, making the insert appropriate for a range of feed conditions within its recommended application envelope. What does the tolerance class M mean for the user? Tolerance class M indicates a standard precision fit for indexable inserts, ensuring consistent seat and repeatable positioning in compatible toolholders and contributing to process reliability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT080320R-F56 WKP35S WKP35S Wendeplatten - Walter Tools
High-performance milling with Tiger·tec Silver and robust WKP35S grade delivers stable cutting and consistent tool life; the parallelogram 85° form and 2 mm corner radius improve engagement control. Order the ADMT080320R-F56 WKP35S milling indexable insert directly via Metav Werkzeuge or ask our consultants if needed. ADMT080320R-F56 WKP35S milling indexable insert for steel and cast iron — Walter Tools The ADMT080320R-F56 WKP35S is a parallelogram 85° milling indexable insert designed for efficient, high‑performance machining of steel and cast iron. Tiger·tec Silver coating WKP35S grade for steel and cast iron Parallelogram 85° insert form Corner radius 2 mm for stability Maximise process stability and productivity with modern coating technology The combination of the Tiger·tec Silver coating and the WKP35S carbide grade is engineered for stable cutting in demanding operations. This pairing reduces flank wear and extends usable tool life, resulting in fewer indexings and less downtime. Designed for use on steel and cast iron (ISO group P and K), the insert supports predictable results in mixed‑batch production and repeatable cycle times — a clear advantage where throughput and consistency matter most. Reliable chip control and secure cutting edge for safer milling The parallelogram 85° geometry together with the chipbreaker F56 improves chip formation and evacuation during heavy and interrupted cuts. The 2 mm corner radius increases edge strength, which helps maintain dimensional accuracy under higher radial engagement. These features translate into fewer surface defects and a steadier cutting process, especially when machining tougher steels or abrasive cast‑iron grades. The insert form also facilitates controlled entry and exit, reducing vibration and offering a smoother surface finish. Clear integration and predictable tolerance for production planning With tolerance class M and standard insert dimensions, the component integrates cleanly into common milling holders and tool assemblies. The compact plate thickness and standard size designation make tool setup straightforward, supporting quick changeover and simple tool inventory management. As a Walter Tools product from the Tiger‑tec Silver series, the insert benefits from tested coating processes and material science that aim to deliver consistent wear behaviour and repeatable part quality in serial production. For application‑specific recommendations and sample cutting advice for Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — consultants are available to discuss machining parameters and compatibility with existing toolholders. Technical data SKU: ADMT080320R-F56-WKP35S-WALTER Designation: ADMT080320R-F56 WKP35S Product type: Milling indexable insert Manufacturer: Walter Tools Facts Free angle: 15° Corner radius: 2 mm Insert size: 08 Plate thickness: 03 Parallelogram angle: 85° Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKP35S Chipbreaker: F56 Applicable materials: P (steel), K (cast iron) Series: Tiger‑tec Silver Execution: T Material group: P / K FAQ Which materials is this insert suitable for? The ADMT080320R-F56 WKP35S insert is specified for ISO groups P and K, meaning it is suitable for machining various steel grades and cast iron. What benefit does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WKP35S grade improves wear resistance and reduces thermal impact, leading to more consistent tool life and better surface quality in milling operations. How does the parallelogram 85° form affect milling performance? The parallelogram 85° geometry optimises cutting engagement and chip flow, offering improved stability and reduced vibration when performing face and shoulder milling tasks. What tolerance and dimensional repeatability can be expected? Tolerance class M indicates standard industrial accuracy and reliable repeatability suitable for production environments requiring consistent insert indexing and dimensional control. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT080320R-F56 WSM35G T Wendeplatten - Walter Tools
Take advantage of a high-performance Tiger‑tec Gold cutting grade combined with an optimised F56 chipbreaker and a precise 15° relief angle for stable, long-lasting milling of stainless steels and heat‑resistant alloys. Order the insert directly via Metav Werkzeuge or consult the team for process recommendations. ADMT080320R-F56 WSM35G milling insert — Tiger‑tec Gold grade for stainless steels and superalloys (Walter Tools) The ADMT080320R-F56 WSM35G is an indexable milling insert engineered for demanding turning and milling tasks on stainless steel and heat‑resistant superalloys, combining a coated‑carbide grade with a geometry that favours secure chip control and consistent cutting‑edge stability. Tiger‑tec Gold coating for thermal stability Optimised F56 chipbreaker for stable chips 15° relief angle and R2.0 corner radius Suitable for stainless steel and superalloys Durable coating and grade for reduced wear and heat damage The combination of the WSM35G grade and the Tiger‑tec Gold coating improves thermal resistance and wear performance when machining tough materials. Coated cemented carbide offers a protective layer that reduces flank wear and lowers the risk of built‑up edge, which translates into longer tool life and fewer index changes. For operations where heat generation and adhesion are critical — notably in the machining of stainless steel (ISO M) and high‑strength alloys — this grade supports sustained cutting conditions without rapid deterioration of the cutting edge. Geometry that enhances chip formation and surface quality A parallelogram 85° insert shape combined with the F56 chipbreaker promotes predictable chip formation and evacuation, reducing recutting and improving process reliability. The 15° relief angle and an R2.0 corner radius balance strength at the cutting edge with the ability to achieve acceptable surface finish; larger radii increase edge robustness, while the relief angle reduces friction against the workpiece. These geometric choices help to maintain dimensional accuracy and support consistent component quality in medium to heavy milling passes. Process efficiency and economic benefits for production Using a cutting insert designed for difficult‑to‑machine materials yields measurable process benefits: more consistent metal removal rates, fewer interrupted cycles for tool changes and improved uptime. The coated carbide grade and robust chip control reduce the frequency of secondary operations caused by poor surface finish or thermal damage. This combination typically leads to improved productivity and a favourable cost‑per‑part equation in serial production where machining stainless steels and superalloys is routine. Practical application notes and suitability The insert is specified for M (stainless steels) and S (heat‑resistant superalloys, titanium) material groups according to ISO classifications, making it suitable where material toughness and heat sensitivity demand specialised grades. The plate is provided in size code 08 with thickness code 03, and the F56 chipbreaker is optimised for controlled swarf in interrupted and continuous cuts. Installers and process planners will value the predictable performance of this insert when selecting tool families for demanding applications and when aiming for reproducible results across batches. Contact Metav Werkzeuge for tailored process advice on Tiger‑tec Gold inserts and secure the ADMT080320R-F56 WSM35G for demanding stainless steel and superalloy milling operations — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical data Article number: ADMT080320R-F56-WSM35G-WALTER Designation: ADMT080320R-F56 Brand: Walter Tools Grade: WSM35G Series: Tiger‑tec Gold Facts Relief angle: 15° Corner radius: 2 Plate size: 08 Thickness code: 03 Shape angle: 85° Special features Coated carbide cutting grade Tiger‑tec Gold Chipbreaker F56 Suitable for stainless steel (M) Suitable for superalloys and titanium (S) Tolerance class M Execution: T FAQ What materials is this insert suitable for? The ADMT080320R‑F56 WSM35G insert is intended for stainless steel (ISO group M) and for heat‑resistant superalloys/titanium (ISO group S), where its Tiger‑tec Gold coating supports thermal stability. How does the F56 chipbreaker affect performance? The F56 chipbreaker on this milling insert promotes controlled chip formation and evacuation, helping to avoid long, stringy chips and to maintain a stable cutting process during the machining of tough materials. What does the R2.0 corner radius mean for machining? An R2.0 corner radius increases the cutting edge’s strength and wear resistance, which is beneficial for heavier cuts and intermittent milling where a robust edge reduces the risk of chipping. Is the insert compatible with standard parallelogram 85° toolholders? The insert’s parallelogram 85° shape is intended for toolholders and systems that accept this geometry; suitability should be confirmed against the toolholder catalogue to ensure correct seating and clamping. Which benefits does the Tiger‑tec Gold technology deliver? Tiger‑tec Gold coating provides enhanced heat resistance and improved wear behaviour, which supports longer tool life and more stable cutting edges under elevated temperatures typical of stainless steel and superalloy machining. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Brand names and trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
ADMT080320R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Reliable, long-life milling performance with the Tiger‑tec Gold PVD-coated WSP45G grade, a robust parallelogram 85° geometry and a 2 mm corner radius for stable cutting; order the insert directly via Metav Werkzeuge or contact our consultants for tailored application advice ADMT080320R-F56 WSP45G milling indexable insert — Tiger‑tec Gold, for steel/stainless/superalloys (Walter Tools) A high-performance ADMT080320R-F56 WSP45G milling indexable insert engineered for versatile face and shoulder milling of steel, stainless steel and heat‑resistant alloys Tiger‑tec Gold PVD-coated carbide grade WSP45G Designed for steel, stainless and superalloys Parallelogram 85° shape with 15° clearance 2 mm corner radius for stable cutting edge Greater material versatility with consistent edge stability The PVD‑coated Tiger‑tec Gold grade provides a balance of toughness and wear resistance, optimised for the combined challenges of chip formation and thermal loading when machining steel, stainless steel and superalloys/titanium. The WSP45G grade is formulated to resist edge breakdown under intermittent cuts and varied feed conditions, delivering more predictable performance and fewer unexpected tool changes. This combination supports higher uptime and a more efficient production rhythm. Geometry that improves cutting security and accessibility The insert’s parallelogram 85° outline and 15° clearance produce a robust cutting edge while enabling good access for shoulder and slot milling operations. The 85° approach offers a compromise between positive engagement and tool strength, reducing deflection in heavy cuts. The 2 mm corner radius increases edge support and extends life where interrupted cuts or stepovers occur, making the geometry particularly suited to demanding milling applications where edge stability is paramount. Chip control and process reliability for productive machining Equipped with chipbreaker F56, the insert promotes consistent chip formation across a broad range of cutting conditions, easing evacuation and reducing recutting. The coated carbide substrate supports thermal stability during sustained operations, which helps to maintain surface finish and repeatable tolerances. These properties translate into measurable process benefits: fewer tool exchanges, steadier cycle times and improved component quality for series production. Practical selection and handling advice for best results When integrating this insert into a machining cell, pair it with a suitably rigid clamping system and a cutter body designed for parallelogram inserts to ensure correct seating and coolant delivery. The tolerance class M and plate thickness 03 contribute to repeatable clamping and indexability; careful torqueing of the seat screw and regular inspection of the seat face will preserve the insert’s performance. For mixed‑material batches, the WSP45G grade offers a convenient single‑grade solution that reduces tool inventory while maintaining machining security. Choose Walter Tools’ Tiger‑tec Gold WSP45G insert for robust, long‑life milling — contact Metav Werkzeuge for availability and application support Technical data Article number: ADMT080320R-F56-WSP45G-WALTER Designation: ADMT080320R-F56 WSP45G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WSP45G Facts Size: 08 Thickness: 03 Corner radius: 2 mm Relief angle: 15° Parallelogram angle: 85° Chipbreaker: F56 Tolerance class: M Special features PVD‑coated carbide grade Tiger‑tec Gold Suitable for steel (P), stainless steel (M), superalloys/titanium (S) Parallelogram 85° insert form 2 mm corner radius for reinforced edge Intended for face and shoulder milling Robust chip control for varied cutting conditions FAQ Which materials is this insert suited for? The WSP45G grade is suitable for machining steel, stainless steel and heat‑resistant superalloys/titanium, offering a versatile option for mixed‑material production runs. What benefits does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold PVD coating on the insert enhances wear resistance and edge stability, increasing tool life and maintaining surface quality under thermal stress. How does the parallelogram 85° shape affect machining? The parallelogram 85° geometry balances cutting access and strength, improving rigidity in shoulder and slot milling while permitting favourable cutting engagement angles. What role does the F56 chipbreaker play? Chipbreaker F56 helps generate consistent chip shapes and improves evacuation, particularly beneficial when machining steels and stainless steels under varied feeds. What is the exact article reference for ordering? The SKU for ordering is ADMT080320R-F56-WSP45G-WALTER, supplied as a Tiger‑tec Gold WSP45G grade insert from Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT10T304R-F56 WKP35G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold coating and the WKP35G grade delivers durable performance and stable chip control for efficient milling of steel and cast iron; order the insert directly via Metav Werkzeuge or consult the technical advisors for application-specific recommendations. ADMT10T304R-F56 WKP35G – Milling indexable insert, Tiger‑tec Gold, for steel and cast iron | Walter Tools The ADMT10T304R-F56 WKP35G is a parallelogram 85° milling insert with Tiger‑tec Gold coating, engineered for productive machining of steel and cast iron in medium to high‑duty operations Tiger‑tec Gold coating for extended tool life Optimised chipformer F56 for reliable chip control Parallelogram 85° geometry for versatile milling 0.4 mm nose radius for improved surface finish High productivity through advanced coating and grade The insert’s Tiger‑tec Gold technology combined with the WKP35G carbide grade provides a balance of wear resistance and toughness suited to the thermal and mechanical stresses of steel and cast iron machining. This coated carbide composition reduces flank wear and helps maintain a consistent cutting edge over longer cycles, which contributes to fewer insert changes and improved cycle times. For production environments where uptime and repeatable results matter, the coating and grade together support stable material removal and predictable tool life. Geometry that supports accuracy and chip management With a parallelogram 85° form and a 15° clearance angle, the geometry of this insert enables efficient engagement and favourable cutting forces during peripheral and face milling. The F56 chipformer is optimised for the typical chips produced from steels and cast irons, promoting controlled breakage and evacuation. A 0.4 mm nose radius delivers a fine edge for achieving good surface finish without sacrificing edge strength. These design choices translate into reliable dimensional results and reduced rework for typical industrial milling tasks. Application focus and operational benefits Designed primarily for machining of steel (ISO group P) and cast iron (ISO group K), the insert suits a range of operations from slotting to shoulder milling where a coated carbide solution is preferred. The combination of robust chip control and the insert’s dimensional features supports both intermittent cuts and continuous passes, making it appropriate for job shops and serial production alike. As a result, the insert helps to lower overall machining cost per component by extending productive cutting time and improving consistency across batches. Contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss Walter Tools Tiger‑tec Gold inserts and to secure the right specification for the intended application Technical Data SKU: ADMT10T304R-F56-WKP35G-WALTER Designation: ADMT10T304R-F56 WKP35G Product type: Fräswendeschneidplatte / Milling indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Insert size: 10 Thickness: T3 Clearance angle: 15° Nose radius: 0.4 mm Plate form: Parallelogram 85° Chipformer: F56 Grade: WKP35G Applicable materials: P / K Tolerance class: M Execution: T Special features Coated carbide (Tiger‑tec Gold) Optimised for steel and cast iron Stable chip formation Productive cutting for medium to high duty FAQ Which materials are recommended for this insert? The ADMT10T304R-F56 WKP35G is optimised for steel (ISO group P) and cast iron (ISO group K), with the WKP35G grade and Tiger‑tec Gold coating tailored to these material properties What advantages does the Tiger‑tec Gold coating provide? Tiger‑tec Gold on the insert improves wear resistance and thermal stability, resulting in longer edge life and more consistent machining performance across production runs How does the F56 chipformer affect machining? The F56 chipformer promotes controlled chip breakage and reliable evacuation when cutting steels and cast irons, reducing the risk of built‑up edge and improving surface quality What geometric features support surface finish? The parallelogram 85° form together with a 0.4 mm nose radius and 15° clearance angle helps produce accurate contours and a fine surface finish while maintaining edge strength Is this insert suitable for interrupted cuts or heavy engagement? The coated carbide grade and the insert geometry provide a balance of toughness and wear resistance suitable for intermittent cuts and medium to heavy engagements typical in production milling Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT10T304R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver grade and the WKP35S cutting material for high wear resistance and stable chip formation; the ADMT10T304R-F56 WKP35S insert combines robust geometry with efficient chip control for reliable milling. Order directly via Metav Werkzeuge or consult our technical team for application advice. ADMT10T304R-F56 WKP35S — milling insert, Tiger·tec Silver, Walter Tools The ADMT10T304R-F56 WKP35S is a parallelogram milling insert designed for productive machining of steel and cast iron with a Tiger·tec Silver coated grade. Tiger·tec Silver coating for high wear resistance Optimised for steel (P) and cast iron (K) Parallelogram 85° geometry for versatile approach 0.4 mm corner radius for reliable surface finish Maximise tool life and process stability with advanced coating The Tiger·tec Silver coating combined with the WKP35S grade provides a balanced response to both abrasive wear and adhesive tendencies encountered when machining steel and cast iron. The multilayer coating is engineered to reduce flank wear and delay notch formation, which means more consistent cutting performance over longer tool life. Due to this improved wear resistance, downtimes for tool changes are reduced and production sequences remain more predictable. The insert’s grade was selected to support common shop conditions, where heat and variable chip morphology demand a robust, coated carbide solution. Geometry that balances cutting forces and surface quality The parallelogram 85° form with a 15° clearance angle directs cutting forces and allows flexible approach angles in face and shoulder milling. The 0.4 mm corner radius contributes to a good surface finish while maintaining edge strength for interrupted cuts. With a plate thickness of T3 and the specified tolerance class M, the insert is dimensionally stable and suited for repeatable setups. These geometric choices are intended to provide a compromise between robustness and finishing capability, enabling the machining of components where moderate to high surface quality is required without sacrificing durability. Controlled chip formation for efficient machining cycles The integrated chipbreaker F56 has been developed to promote predictable chip shapes with both unalloyed and alloyed steels as well as cast iron, improving evacuation and reducing the risk of plunging chips. Classified for ISO groups P and K, the insert supports common workshop materials and typical cutting parameters. The combination of chip control and the coated grade contributes to reduced cycle times in many applications, as fewer interruptions for chip clearing and fewer insert changes translate into higher machine uptime and a more economical production process. For application-specific recommendations or to secure supply of the ADMT10T304R-F56 WKP35S milling insert from Walter Tools, please contact Metav Werkzeuge for direct ordering or consultancy by phone or e‑mail. Technical data Article number: ADMT10T304R-F56-WKP35S-WALTER Designation: ADMT10T304R-F56 WKP35S Brand: Walter Tools Product type: milling insert Facts Plate size: 10 Plate thickness: T3 Corner radius: 0.4 mm Clearance angle: 15° Plate form: Parallelogram 85° Chipbreaker: F56 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Applicable material groups: P (steel), K (cast iron) Suitable for milling operations requiring stable chip formation and wear resistance FAQ What materials is this insert suitable for? The ADMT10T304R-F56 WKP35S milling insert from Walter Tools is specified for ISO material groups P (steel) and K (cast iron), making it suitable for a wide range of steels and cast iron components. How does the Tiger·tec Silver series improve performance? The Tiger·tec Silver coating used on the WKP35S grade reduces abrasive wear and improves thermal stability, which extends tool life and keeps machining more consistent under varying cutting conditions. Which machining tasks benefit most from the 85° parallelogram geometry? The 85° parallelogram geometry is advantageous for face and shoulder milling where flexible approach angles and controlled cutting forces are required, helping to maintain surface quality and tool stability. What role does the F56 chipbreaker play? The F56 chipbreaker is designed to produce manageable chips with both steel and cast iron, aiding evacuation and reducing the likelihood of chip-related interruptions during milling. Is this insert dimensionally stable for repeatable setups? Yes; the T3 thickness and tolerance class M provide dimensional stability suitable for repeatable clamping and consistent machining results. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned exclusively for explanatory purposes. There is no connection between our company and the named brands. The offered article is original factory-new goods of the manufacturer. The Walter AG (brand: Walter Tools) is a leading manufacturer of precision tools for metalworking and is part of the Sandvik Group.
ADMT10T304R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, the WSM35G grade and a 15° relief angle for reliable machining of tough, heat‑resistant materials; order the insert directly via Metav Werkzeuge or request application advice from our consultants for optimal tool life and consistent surface quality. ADMT10T304R-F56 WSM35G Walter Tools — Milling insert, Tiger‑tec Gold, 15° relief The ADMT10T304R-F56 WSM35G is a parallelogram milling insert designed for machining rostfreien Stahl and heat‑resistant superalloys, combining a coated carbide grade with a specialised chipbreaker for stable cutting Tiger‑tec Gold coating for heat resistance Optimised chip control with F56 breaker 15° relief for stable cutting edges Parallelogram 85° shape for versatile milling High performance for demanding materials The WSM35G grade, part of the Tiger‑tec Gold series, is a coated carbide designed specifically for machining rostfreien Stahl and heat‑resistant superalloys. Its formulation promotes wear resistance and a stable cutting edge, which reduces the frequency of tool changes and supports uninterrupted production. For workshops processing clutch components, medical parts or aerospace alloys, this combination translates into improved process reliability and fewer interruptions for dressing or insert replacement. Geometry that improves process reliability The insert's parallelogram 85° geometry and 15° relief angle provide a dependable cutting orientation that supports moderate engagement angles and predictable load distribution. The 0.4 mm corner radius balances edge strength with surface finish capability, while the chipbreaker F56 helps form short, controllable chips in sticky, gummy materials. Together these elements reduce built‑up edge formation and thermal loading, so operators obtain a consistent result even under challenging cutting conditions. Productivity gains and surface quality benefits By combining a heat‑resistant coating with a geometry focused on chip control, this insert helps raise machining throughput while maintaining finish standards. The result is higher productivity with fewer rejects and a reduced need for secondary finishing. Process planners will appreciate the repeatable performance and the opportunity to extend tool life, thereby lowering machine downtime and improving overall shopfloor efficiency. Practical selection and application guidance When selecting a grade for rostfreien Stahl or titanium alloys, the WSM35G option should be considered where thermal stability and edge integrity are priorities. The ADMT10T304R‑F56 insert suits operations that require a compromise between edge strength and surface finish; for specific feeds, speeds and toolholder arrangements, Metav Werkzeuge can provide tailored recommendations to match the machining centre and part geometry. Contact Metav Werkzeuge for tailored application advice and to order genuine Walter Tools inserts with the WSM35G grade. Technical data SKU: ADMT10T304R-F56-WSM35G-WALTER Article designation: ADMT10T304R-F56 Grade: WSM35G Series: Tiger‑tec Gold Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 0.4 mm Shape: Parallelogram 85° Size designation: 10 Plate thickness: T3 Tolerance class: M Special features Chipbreaker: F56 Coated carbide grade for high thermal stability Material recommendation: S / M (rostfreien Stahl; hitzebeständige Superlegierungen and titanium) Intended use: milling insert for challenging materials FAQ What materials is this insert best suited for? The ADMT10T304R-F56 WSM35G insert is recommended for rostfreien Stahl and heat‑resistant superalloys (S/M), where thermal stability and stable chip formation are required. How does the chipbreaker F56 affect machining? The chipbreaker F56 promotes short, controlled chips and helps prevent long, stringy swarf when machining tough and gummy materials, improving process security with the WSM35G grade. What benefit does the 15° relief angle provide? A 15° relief angle reduces contact on the flank face, lowering friction and heat generation and contributing to a more stable cutting edge during interrupted or continuous milling. Is the 0.4 mm corner radius suited for finishing operations? The 0.4 mm radius offers a compromise between edge strength and surface finish, making it suitable for semi‑finishing and finishing passes where robustness is required without sacrificing quality. Can this insert be used for titanium alloys? Yes; the WSM35G grade and the insert geometry make it appropriate for selected titanium and cobalt‑chrome applications within the S/M material groups. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected designations are used for explanation only. There is no affiliation between our company and the named brands. The offered item is original, factory‑new merchandise from the manufacturer (Walter Tools).
ADMT10T304R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger-tec Gold PVD coating for heat resistance and the WSP45G grade for secure chip formation; the parallelogram 85° form and 0.4 mm corner radius ensure reproducible axial milling results. Order the ADMT10T304R-F56 WSP45G directly via Metav Werkzeuge or ask our consultants if needed. ADMT10T304R-F56 WSP45G milling insert — Tiger-tec Gold, 15° clearance, 0.4 mm radius (Walter Tools) The ADMT10T304R-F56 WSP45G is an indexable milling insert designed for reliable finishing and roughing in steels, rostfreier Stahl and heat-resistant superalloys, optimised for axial milling operations High-performance Tiger-tec Gold coating Versatile for P / M / S materials Parallelogram 85° form for axial milling 0.4 mm corner radius for precise cuts Consistent cutting performance across demanding materials The coated milling insert uses the Tiger-tec Gold technology to deliver improved thermal stability and wear resistance, which translates into longer cutting intervals and fewer tool changes. The WSP45G grade is a PVD-coated carbide developed for toughness and broad applicability: it manages the typical heat and chip behaviour when machining steel, rostfreier Stahl and superalloys/titanium. By choosing a tougher grade with a specialised coating, the result is a more stable cutting edge under variable loads and temperatures, reducing the risk of edge chipping and built-up edge formation. This stability supports predictable cycle times and repeatable part quality in production environments. Geometry engineered for precise axial milling and chip control The insert’s parallelogram 85° plate form combined with a 15° clearance angle creates a geometry suited to axial milling strategies, improving accessibility in tight features and enabling efficient axial engagement. The integrated F56 chipbreaker promotes controlled chip segmentation for a wide range of feeds and depths, reducing the likelihood of long, stringy chips and improving surface finish. The 0.4 mm corner radius provides a balance between strength and finish quality, allowing reliable corner life without sacrificing dimensional accuracy. Specified plate thickness T3 gives stable clamping and resistance to vibration during moderate depth cuts. Productivity gains through fewer interruptions and predictable tool life The insert’s design focuses on economical machining: the combination of a robust substrate and Tiger-tec Gold coating extends tool life, while consistent chip control reduces downtime for clearing chips or reworking components. For job shops and production lines aiming to raise throughput, the insert supports higher process stability and repeatable component tolerances. Clear identification via the ISO designation ensures straightforward tool selection and inventory control, simplifying logistics and aiding rapid quoting for production batches. Contact Metav Werkzeuge for tailored advice on integrating the ADMT10T304R-F56 WSP45G into existing milling processes and to arrange supply from stock Technical data Article number: ADMT10T304R-F56-WSP45G-WALTER SKU / Label: Fräswendeschneidplatte ADMT10T304R-F56 WSP45G Walter Tools Product type: Milling insert Manufacturer: Walter Tools Facts Corner radius: 0.4 mm Clearance angle: 15° Insert size: 10 Plate thickness: T3 Tolerance class: M Form: Parallelogram 85° Special features Series: Tiger-tec Gold Grade: WSP45G (PVD-coated carbide) Chipbreaker: F56 Applicable materials: P / M / S Execution: T Suitable for axial milling FAQ What materials is this insert suitable for? The ADMT10T304R-F56 WSP45G insert from Walter Tools is specified for P / M / S applications, meaning it is suitable for steel, rostfreier Stahl and heat-resistant superalloys/titanium as listed in the product data. How does the Tiger-tec Gold coating benefit production runs? The Tiger-tec Gold coating on this Walter Tools insert increases thermal and wear resistance, which helps to extend tool life and maintain consistent cutting performance over longer production runs. What milling strategies suit the parallelogram 85° form? The parallelogram 85° geometry is optimised for axial milling operations and provides improved accessibility for slotting and face milling where axial engagement is required. Can the insert handle mixed batch machining of steel and rostfreier Stahl? Yes. The WSP45G grade is designed as a versatile PVD-coated option that handles the heat and chip characteristics of both steel and rostfreier Stahl, enabling mixed-material batches with reduced tooling changes. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. The mention of brand names such as Walter Tools is for identification and explanation only; there is no affiliation between Metav Werkzeuge and the brand owners. The offered item is an original, factory-new product of the respective manufacturer.
ADMT10T308R-F56 WKP25S Wendeplatten - Walter Tools
The combination of Tiger‑tec Silver coating and the WKP25S grade ensures reliable wear resistance and stable chip formation for demanding steel and cast iron applications; the Parallelogram 85° geometry with a 15° clearance angle delivers versatile milling strategies and robust edge life. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. ADMT10T308R-F56 WKP25S milling indexable insert – Walter Tools, Tiger‑tec Silver for steel & cast iron A high‑performance ADMT10T308R-F56 WKP25S milling insert engineered for productive machining of steel and cast iron, optimised for reliable chip control and extended tool life. Tiger‑tec Silver coating for extended tool life Optimised for steel and cast iron machining Parallelogram 85° shape for flexible milling strategies 0.8 mm corner radius for robust edge strength High productivity through material‑matched grade The insert’s WKP25S grade, a coated carbide developed within the Tiger‑tec Silver family, is specifically matched to the thermal and mechanical demands of steel and cast iron (ISO groups P and K). This tailored combination reduces flank and crater wear while maintaining consistent cutting performance, which translates into fewer tool changes and higher cumulative productivity. The presence of a dedicated F56 chipbreaker helps to shape and evacuate chips reliably, reducing downtime linked to chip control problems and stabilising process output. Durable cutting edge and predictable wear behaviour A 0.8 mm corner radius paired with tolerance class M delivers a balance between edge strength and dimensional consistency. The coated substrate provides wear resistance under mixed cutting temperatures, while the geometry resists chipping under interrupted cuts. The result is longer tool life and predictable tool‑change intervals, enabling tighter process planning and improved cost efficiency per component. For operations seeking a dependable cutting regime, this insert reduces variability and supports repeatable part quality. Geometry designed for versatile milling strategies The Parallelogram 85° form offers an adaptable approach to face, shoulder and helical milling where approach angles influence radial cutting force and surface finish. With a 15° clearance (relief) angle and T3 plate thickness, the geometry facilitates entry into confined contours and provides stability during lateral engagement. These characteristics assist processors in selecting cutting parameters that favour higher metal removal rates or superior surface finish, depending on the production objective. Process integration and practical application guidance As a Walter Tools solution, the insert is intended for catalogue‑ and geometry‑dependent operations in general‑duty to demanding milling tasks on steel and cast iron. The combination of grade, coating and chipbreaker simplifies parameter selection for machinists and process engineers: optimise feed for chip segmentation and adjust speed to balance wear and productivity. The SKU identifies the specific configuration for procurement and inventory control, ensuring compatibility with existing toolholders and insert seats. For tailored cutting data and test results, Metav Werkzeuge’s consultants can provide machining recommendations and parameter windows. Contact Metav Werkzeuge for application support and local availability of Walter Tools Tiger‑tec Silver inserts—technical consultation and ordering via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ADMT10T308R-F56-WKP25S-WALTER Label: Fräswendeschneidplatte ADMT10T308R-F56 WKP25S Walter Tools SKU: ADMT10T308R-F56-WKP25S-WALTER Series: Tiger‑tec Silver Grade: WKP25S Facts Clearance angle: 15° Corner radius: 0.8 mm Plate form: Parallelogram 85° Plate size: 10 Plate thickness: T3 Tolerance class: M Special features Coating: Tiger‑tec Silver Chipbreaker: F56 Material applicability: steel (P) Material applicability: cast iron (K) Designation: ADMT10T308R-F56 WKP25S FAQ What materials is this insert suitable for? The ADMT10T308R-F56 WKP25S insert is designed primarily for steel and cast iron machining, matching ISO groups P and K as indicated by the WKP25S grade. How does the Tiger‑tec Silver coating benefit tool life? The Tiger‑tec Silver coating reduces abrasive and adhesive wear on the cutting edges, helping the insert maintain sharpness and extend service life under typical steel and cast iron conditions. What role does the F56 chipbreaker play in milling? The F56 chipbreaker controls chip formation and evacuation, which improves surface quality and reduces the risk of chip‑related incidents during milling. Is the geometry suitable for both face and shoulder milling? Yes, the Parallelogram 85° form with a 15° clearance angle and moderate corner radius provides flexibility for face, shoulder and entry operations where a balance of strength and access is required. How is consistency between inserts ensured? Tolerance class M ensures dimensional consistency for predictable seating and repeatable tool performance across batches of inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademark notice: Brand names and trademarks are the property of their respective owners. They are used solely for identification and explanatory purposes. The offered item is original and brand new from the manufacturer. The Walter brand is mentioned where appropriate.
ADMT10T308R-F56 WKP35G Wendeplatten - Walter Tools
High abrasion resistance from the Tiger·tec Gold coating combined with the optimised F56 chipbreaker and a robust 0.8 mm corner radius ensures stable, productive milling of steel and cast iron — order the ADMT10T308R-F56 WKP35G insert directly via Metav Werkzeuge or ask our consultants for tailored application advice. ADMT10T308R-F56 WKP35G Parallelogram milling insert, Tiger·tec Gold, for steel and cast iron — Walter Tools ADMT10T308R-F56 WKP35G is a coated carbide milling insert in a parallelogram 85° form designed for productive face and shoulder milling of steels and cast irons in industrial machining. Tiger·tec Gold coating for extended tool life Optimised F56 chipbreaker for stable chips Parallelogram 85° geometry for versatile milling Suitable for steel and cast iron applications Long-lasting coating for consistent productivity The Tiger·tec Gold series brings a proven coating technology that improves wear resistance and extends edge life under the cyclic loads typical in steel and cast iron machining. The WKP35G grade is a coated carbide formulation tuned for the thermal and abrasive demands of group P (steel) and group K (cast iron) materials according to ISO classifications. This results in fewer tool changes, reduced downtime and a lower cost per component in medium- to high-volume production. The combination of the coating and the grade is intended to deliver predictable performance across a broad range of machining parameters. Controlled chip flow and robust cutting geometry The insert’s F56 chipbreaker is engineered to produce controllable, short chips that evacuate reliably during interrupted and continuous cuts, improving surface quality and machine uptime. The parallelogram 85° geometry offers a favourable cutting direction and adaptability in common milling setups, while the 15° clearance angle helps reduce rubbing at the flank. A 0.8 mm corner radius increases edge strength for roughing passes yet still enables acceptable finishes in finishing operations. Together, these geometrical choices reduce cutting forces and lead to more stable processes and consistent component tolerances. Practical benefits for workshop integration Designed with industrial machinists in mind, the insert matches the ADMT10-series form factor and tolerance expectations (tolerance class M), making it suitable for systematic tool management and predictable tool life planning. The plate thickness T3 and standard plate size simplify inventory and reorder processes. For production planners the key advantages are repeatability, reduced scrap, and improved surface integrity on machined parts. If process optimisation is required, Metav Werkzeuge provides application guidance and cutting data recommendations to align cutting speeds and feeds with shop conditions. Contact Metav Werkzeuge for availability, cutting data and application recommendations for the Walter Tools ADMT10T308R-F56 WKP35G — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data SKU: ADMT10T308R-F56-WKP35G-WALTER Article: ADMT10T308R-F56 WKP35G Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Relief angle: 15° Corner radius: 0.8 mm Plate size: 10 mm Thickness: T3 Tolerance class: M Special features Grade: WKP35G Chipbreaker: F56 Geometry: Parallelogram 85° Material suitability: Steel (P), Cast iron (K) Coating technology: Tiger·tec Gold Material of insert: Coated carbide FAQ Which materials is this insert best suited for? The ADMT10T308R-F56 WKP35G insert is optimised for steel (ISO group P) and cast iron (ISO group K) applications, reflecting the WKP35G grade and Tiger·tec Gold coating characteristics. What cutting geometry and edge radius does it offer? This insert features a parallelogram 85° geometry, a 15° relief angle and a 0.8 mm corner radius to balance edge strength with surface finish requirements. How does the F56 chipbreaker improve machining? The F56 chipbreaker creates stable, short chips that evacuate reliably, which supports consistent surface quality and reduces the likelihood of chip-related interruptions. What does tolerance class M mean for application? Tolerance class M denotes a medium precision class suitable for general industrial milling applications where repeatable seating and interchangeability are required. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product from the manufacturer. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT10T308R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating and the WKP35S grade for extended tool life and consistent chip control; order directly via Metav Werkzeuge or contact the consultants for tailored cutting data and holder compatibility. ADMT10T308R-F56 WKP35S Parallelogram 85° milling insert for steel and cast iron, Walter Tools The ADMT10T308R-F56 WKP35S is a coated indexable milling insert designed for productive face and peripheral milling in steel (P) and cast iron (K), combining a robust grade with a geometry tuned for reliable chip control Tiger·tec Silver coating for extended wear resistance Designed for steel and cast iron machining Parallelogram 85° form with 15° clearance 0.8 mm corner radius for precise cutting Longer tool life through advanced coating technology The Tiger·tec Silver coating and the WKP35S grade deliver higher thermal stability and improved resistance to abrasive wear, which results in fewer tool changes and longer effective cutting periods. This coated carbide combination reduces flank wear under the typical heat and pressures of machining steels and cast irons, enabling steadier process windows and lower downtime. The result is a measurable uplift in productivity where tool-life consistency matters. Geometry engineered for stable chips and surface finish A parallelogram 85° plate form together with a 15° clearance angle and a 0.8 mm corner radius creates a balanced cutting edge that resists chipping while promoting controlled chip formation. The F56 chipbreaker is optimised to break and evacuate chips for common machining depths and feeds, reducing chip re-cutting and safeguarding the workpiece surface. These features translate into reliable dimensional results and a reduced need for secondary finishing. Versatile performance for P and K material groups Rated for ISO groups P / K, this insert is suitable for a broad range of unalloyed and alloyed steels as well as grey and ductile cast irons. The ADMT designation and size 10 format ensure compatibility with many standard toolholders; the T3 plate thickness contributes to edge stability during interrupted cuts. For production environments that alternate between steels and cast irons, this insert offers a pragmatic balance of economy and consistent cutting behaviour, supporting predictable cycle times and surface quality. Contact Metav Werkzeuge for application-specific cutting data, toolholder checks and to discuss procurement of the ADMT10T308R-F56 WKP35S from Walter Tools Technical Data Article number: ADMT10T308R-F56-WKP35S-WALTER Label: Fräswendeschneidplatte ADMT10T308R-F56 WKP35S Walter Tools Type: Fräswendeschneidplatte / Milling insert Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKP35S Chipbreaker: F56 Form: Parallelogram 85° Designation: ADMT10T308R-F56 WKP35S Facts Clearance angle: 15° Corner radius: 0.8 mm Plate size: 10 Plate thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Silver Material: P / K (Steel and Cast iron) Suitability: Steel machining, Cast iron machining Execution: T UID / SKU: ADMT10T308R-F56-WKP35S-WALTER FAQ What materials is this insert suitable for? The ADMT10T308R-F56 WKP35S is designed for ISO groups P and K, making it suitable for machining a range of steels and cast irons. What are the main advantages of the Tiger·tec Silver coating? The Tiger·tec Silver coating on the WKP35S grade improves thermal stability and abrasion resistance, extending tool life and supporting consistent machining results. How does the F56 chipbreaker influence machining? The F56 chipbreaker promotes controlled chip formation and efficient evacuation, which helps maintain surface quality and reduces the risk of chip-related interruptions. Is the insert compatible with standard ADMT toolholders? The ADMT10T308R-F56 format is a standard indexable geometry intended for use with holders that accept ADMT inserts; check holder specifications for size 10 and T3 thickness compatibility. What cutting tasks is the 0.8 mm corner radius best for? A 0.8 mm corner radius balances edge strength and finish quality, suitable for general finishing and semi-finishing operations where chipping resistance is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are cited for explanatory purposes only and do not imply any affiliation with our company. The offered item is original, factory‑new goods from the manufacturer Walter Tools.
ADMT10T308R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a WSM35G graded coated carbide and a secure parallelogram seating to improve edge life and machining reliability when working with stainless steels and heat‑resistant alloys; order the inserts via Metav Werkzeuge or consult the team for application advice. ADMT10T308R-F56 WSM35G indexable milling insert — Tiger·tec Gold coating, for stainless steels and superalloys — Walter Tools The ADMT10T308R-F56 WSM35G is an indexable milling insert engineered for productive machining of rostfreier Stahl and heat‑resistant alloys, delivering stable chip control and enhanced tool life in demanding cuts Tiger·tec Gold coating for edge stability Optimised for rostfreier Stahl and superalloys Parallelogram 85° shape for secure seating 0.8 mm corner radius for consistent surface finish Consistent edge performance for hard-to-cut materials The coated carbide grade WSM35G targets demanding applications by combining a wear‑resistant coating with a substrate designed for thermal stability. This composition supports steady chip formation and reduces the risk of built‑up edge when machining rostfreier Stahl and nickel‑based alloys. The Tiger·tec Gold technology contributes to lower flank wear and reliable cutting behaviour, which translates into longer intervals between indexings and a more predictable production flow. Geometry and clamping that improve process security A parallelogram 85° seating reduces insert movement under load and transfers cutting forces evenly to the toolholder, enhancing stability during interrupted cuts. The 0.8 mm corner radius provides a balance between edge strength and surface finish, making the insert suitable for medium to heavy passes while still maintaining a consistent workpiece quality. The ADMT form ensures repeatable positioning, simplifying set‑up and reducing the need for frequent adjustments. Chip control and edge preparation for productive milling Equipped with the F56 chipbreaker, the insert manages swarf effectively across a range of feeds and depths, which minimises recut and contributes to consistent cycle times. The chipbreaker geometry is tuned to the material groups indicated for the grade, supporting efficient evacuation in throaty pockets and slotting operations. As a result, tool life is extended and machine uptime benefits from fewer interruptions for clearing chips. Material scope and application guidance The insert is specified for materials in material groups M and S according to ISO classifications — that is, rostfreier Stahl (stainless steels) and heat‑resistant superalloys or titanium. These groups present challenges such as heat concentration and ductile chip formation; the WSM35G grade and its coating are engineered to address these by providing thermal resistance and a stable cutting edge. Where high process security and surface quality are priorities, this insert offers a robust solution for both finishing and semi‑finishing operations. Contact Metav Werkzeuge for application recommendations and to source Walter Tools ADMT10T308R-F56 WSM35G inserts for demanding rostfreier Stahl and superalloy machining Technical data SKU: ADMT10T308R-F56-WSM35G-WALTER Article designation: ADMT10T308R-F56 WSM35G Product type: Milling indexable insert Brand: Walter Tools Series: Tiger·tec Gold Facts Relief angle: 15° Corner radius: 0.8 mm Insert shape: Parallelogram 85° Insert size: 10 Thickness: T3 Chipbreaker: F56 Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Grade: WSM35G Geometry: Parallelogram ADMT design Material suitability: rostfreier Stahl (M), superalloys / titanium (S) Intended use: productive milling, secure chip control FAQ What materials is this insert suitable for? The ADMT10T308R-F56 WSM35G insert is specified for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), offering solutions for tough‑to‑machine alloys. How does the Tiger·tec Gold coating help performance? Tiger·tec Gold coating on the WSM35G grade increases thermal resistance and reduces flank wear, improving edge life and maintaining cut quality under higher temperatures. What is the benefit of the parallelogram 85° shape? The parallelogram 85° shape secures the insert in the pocket and distributes cutting forces evenly, which enhances process stability during interrupted and heavy cuts. Which chipbreaker should be expected on this insert and why? This insert features the F56 chipbreaker, optimised for consistent chip control in rostfreier Stahl and superalloy operations, reducing recutting and improving swarf evacuation. Is the corner radius suitable for finishing operations? The 0.8 mm corner radius balances edge strength and surface finish, making the insert suitable for both semi‑finishing and certain finishing passes depending on cutting parameters. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. The mentioned brand is included for identification and explanatory purposes only; there is no affiliation between our company and the named manufacturers. The offered article is an original, brand‑new product from the manufacturer.
ADMT10T308R-F56 WSM35S WSM35S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating, the WSM35S grade and the Parallelogram 85° geometry for reliable edge life and secure chip control; order the insert directly via Metav Werkzeuge or request advice from our consultants. ADMT10T308R-F56 WSM35S milling indexable insert — Tiger·tec Silver, chipbreaker F56 (Walter Tools) ADMT10T308R-F56 WSM35S is a high-performance milling insert designed for demanding applications in rostfreier Stahl and heat-resistant alloys Tiger·tec Silver coating for longevity Grade WSM35S for difficult-to-machine materials Parallelogram 85° geometry for axial versatility Chipbreaker F56 for controlled chip formation Longer tool life through modern coating technology The combination of the Tiger·tec Silver coating and the WSM35S carbide grade delivers improved wear resistance and a more stable cutting edge under thermal stress. Coating technology is engineered for application in rostfreier Stahl and superalloys, where heat generation and built-up edge are critical factors. By reducing flank wear and extending edge integrity, the insert supports longer service intervals and fewer indexings, which contributes to higher productivity and lower process costs. Predictable chip control and process security The F56 chipbreaker is optimised for secure chip formation when machining tough materials; chips are guided away from the cutting zone to reduce re-cutting and surface damage. The Parallelogram 85° geometry offers a balanced entry angle that is suited to axial milling tasks and stable engagement. Together, these characteristics enable consistent material removal rates and reproducible surface finishes, giving production planners reliable cycle-time estimates and operators steady machining conditions. Geometry and angles that improve cutting stability A 15° clearance angle and a 0.8 mm corner radius are implemented to balance edge strength with accessibility into contours and slots. The clearance reduces rubbing and heat build-up behind the cutting edge, while the corner radius strengthens the periphery against mechanical shock when interrupted cuts occur. These geometric choices are especially beneficial in applications involving rostfreier Stahl and high-temperature alloys, where edge robustness determines component quality and tool life. Practical advantages for workshop and production The insert is supplied in the ADMT10T308R-F56 form factor with a T3 thickness and size designation of 10, enabling compatibility with standard tool bodies that accept this insert family. Since the grade is part of the Tiger·tec Silver series, it is ideally placed for operations where a combination of wear resistance and thermal stability is required. Selection of this insert will typically reduce downtime associated with frequent edge changes and supports smoother production flows in both job-shop and serial environments. Choose the Walter Tools Tiger·tec Silver ADMT10T308R-F56 WSM35S insert for applications in rostfreier Stahl and high-temperature alloys — contact Metav Werkzeuge for availability and application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ADMT10T308R-F56-WSM35S-WALTER Designation: ADMT10T308R-F56 WSM35S Manufacturer: Walter Tools Facts Geometry: Parallelogram 85° Clearance angle: 15° Corner radius: 0.8 mm Size: 10 Thickness: T3 Grade: WSM35S Special features Series: Tiger·tec Silver Chipbreaker: F56 Material compatibility: rostfreier Stahl, Superalloys/Titanium (ISO M, S) Substrate: coated carbide (beschichtetes Hartmetall) Tolerance class: M Execution: T FAQ What materials is the ADMT10T308R-F56 WSM35S suitable for? The ADMT10T308R-F56 WSM35S insert is specified for rostfreier Stahl and heat-resistant superalloys (ISO groups M and S), where thermal stability and controlled chip formation are required. How does the Tiger·tec Silver coating benefit performance? Tiger·tec Silver coating on the WSM35S grade enhances wear resistance and thermal protection, which prolongs edge life and supports consistent machining of challenging materials. Can this insert be used for axial milling and slotting operations? Yes; the Parallelogram 85° form and the 15° clearance angle provide a versatile entry geometry suited to axial milling and many slotting scenarios when mounted in the correct tool holder. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT10T308R-F56 WSM45X WSM45X Wendeplatten - Walter Tools
Combining the WSM45X coated carbide with a Parallelogram 85° geometry and an F56 chipbreaker provides secure chip control and extended cutting-edge life when machining challenging materials such as rostfreier Stahl and heat-resistant superalloys; take advantage of the stable edge performance and reliable chip formation for consistent production results. Order the ADMT10T308R-F56 WSM45X directly via Metav Werkzeuge or consult the technical team for tailored application advice. ADMT10T308R-F56 WSM45X milling insert, coated carbide, for rostfreier Stahl — Walter Tools The ADMT10T308R-F56 WSM45X is a parallelogram-shaped indexable milling insert designed for secure face and shoulder milling of rostfreier Stahl and heat-resistant alloys, offering stable cutting edges and efficient chip formation in demanding operations. Coated carbide grade WSM45X for tough alloys Parallelogram 85° geometry for stable milling 0.8 mm corner radius for reliable edge life F56 chipbreaker for controlled chip formation Reliable performance for difficult-to-machine materials The combination of a coated carbide grade specifically developed for high thermal and mechanical loads and the insert's geometry ensures repeatable performance when machining rostfreier Stahl and nickel-based alloys. The WSM45X composition promotes stable chip formation under elevated cutting temperatures, reducing the tendency for built-up edge and minimising tool-related stoppages. For production environments seeking process stability, this insert reduces the frequency of unpredictable tool wear and supports longer productive cutting times. Predictable chip control and edge stability for efficient cycles With an integrated F56 chipbreaker and a 0.8 mm corner radius, the insert provides well-controlled chip segmentation and a robust cutting edge, which together improve surface finish and protect the tool margin during interrupted cuts. The chipbreaker is tailored to manage the tough chips typical of S and M material groups (heat-resistant superalloys and rostfreier Stahl), enabling safer evacuation and lower thermal load on the cutting edge. This results in fewer machining interruptions and more consistent component quality across batches. Practical dimensions and compatibility for easy tool integration The insert's Parallelogram 85° form and T3 thickness make it compatible with a wide range of milling toolholders designed for indexable inserts, allowing straightforward replacement and predictable seat fit. Key geometric data such as the 15° clearance angle and the measured corner radius support accurate toolpath planning and reliable assembly in multi-insert cutters. Where process optimisation is required, pairing this insert with appropriately rated toolholders and cutting parameters from Walter Tools assists in achieving the expected tool life and part tolerances. For application-specific recommendations or to integrate Walter Tools inserts into an existing machining cell, contact Metav Werkzeuge for expert advice and specification support — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number / SKU: ADMT10T308R-F56-WSM45X-WALTER Designation: ADMT10T308R-F56 WSM45X Type: Milling insert Brand: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Core specifications Size: 10 mm Geometry: Parallelogram 85° Clearance angle: 15° Corner radius: 0.8 mm Thickness: T3 Chipbreaker: F56 Tolerance class: M Materials & features Coating: coated carbide (WSM45X) Material suitability: S, M (ISO groups) — heat-resistant alloys and rostfreier Stahl Edge stability: optimised for secure chip formation Typical applications: face and shoulder milling in demanding materials Series information: Walter Schneidstoffsorte - Serie offen FAQ What materials is this insert suited for? This insert is designed for machining S and M ISO groups and performs well in rostfreier Stahl and heat-resistant superalloys when using recommended cutting parameters. How does the F56 chipbreaker benefit production runs? The F56 chipbreaker on the ADMT10T308R-F56 supports controlled chip formation, reducing the risk of built-up edge and improving surface quality during extended runs. Which insert geometry is used and why does it matter? The Parallelogram 85° geometry provides stable cutting engagement and helps maintain consistent cutting forces, contributing to reliable edge life and dimensional stability. Is the corner radius suitable for finishing? The 0.8 mm corner radius offers a compromise between edge strength and surface finish, making it suitable for semi-finishing and robust finishing tasks in demanding materials. Can the insert be used in standard indexable milling systems? Yes, the ADMT10T308R-F56 WSM45X is compatible with holders designed for parallelogram inserts of the specified size and thickness; ensure seat and clamp compatibility before assembly. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for clarification purposes only and do not imply any affiliation between Metav Werkzeuge and the named manufacturers. The listed article is an original, brand-new product from the stated manufacturer.
ADMT10T308R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the proven Tiger‑tec Gold cutting grade and the versatile WSP45G chemistry to secure stable chip formation and consistent edge life in mixed milling operations; order the required inserts directly via Metav Werkzeuge or consult our specialists for tailored cutting data. ADMT10T308R-F56 WSP45G — Milling insert, Parallelogram 85°, Walter Tools The ADMT10T308R-F56 WSP45G is a parallelogram 85° milling insert engineered for versatile milling of steel, stainless steel and heat‑resistant alloys in general milling applications Tiger‑tec Gold PVD coating Versatile for P / M / S materials Parallelogram 85° geometry Chipbreaker F56 for stable chips Corner radius 0.8 mm for robustness Higher throughput through optimised cutting grade and coating The combination of the WSP45G grade with the Tiger‑tec Gold coating gives a balanced performance for common milling tasks on steels and stainless‑standing materials. The coated carbide substrate reduces flank wear and extends tool life under typical industrial feeds and speeds. As a consequence, cycle times are often reduced because the insert tolerates the elevated temperatures and work‑hardening tendencies of many steels, while the coating supports consistent surface quality. This makes the insert particularly suitable for medium‑to‑high productivity milling where reproducible results and predictable tool change intervals matter. Precise geometry and chip control for reliable machining The Parallelogram 85° form and integrated chipbreaker F56 ensure directed chip flow and secure engagement at common axial depths. The 15° free angle and corner radius 0.8 mm combine to provide a robust cutting edge that resists edge chipping when interrupted cuts or variable engagement occur. Explained simply, the geometry reduces mechanical shock to the cutting edge and helps to maintain a stable cutting process, which is beneficial when machining mixed batches or components with varied contours. The result is fewer rejects and steadier surface finish from one operation to the next. Application guidance and economic advantages Designed for the P / M / S material groups, this insert handles unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys or titanium. The WSP45G grade is a tough, PVD‑coated carbide developed for milling, which means operators can rely on consistent chip formation and a broad material coverage without frequent grade changes. From a cost perspective, extended edge life and fewer machining interruptions lower overall process costs and support leaner production schedules. For specific cutting parameters and optimised feeds or speeds, reference cutting data from Walter Tools or contact Metav Werkzeuge for condition‑specific recommendations. Contact Metav Werkzeuge today for specific cutting parameters, availability and advice on integrating Walter Tools ADMT10T308R-F56 WSP45G into production; eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data Article number: ADMT10T308R-F56-WSP45G-WALTER Article designation: ADMT10T308R-F56 WSP45G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WSP45G Tolerance class: M Shape: Parallelogram 85° Execution: T Numbers / Core technical data Free angle: 15° Corner radius: 0.8 mm Plate size: 10 Plate thickness: T3 Special features Coated carbide (Tiger‑tec Gold) Chipbreaker type: F56 Material applicability: P / M / S Robust edge for interrupted cuts Designed for general milling applications FAQ What materials is this insert suitable for? The ADMT10T308R‑F56 WSP45G insert from Walter Tools is qualified for P / M / S groups, covering steel, stainless steel and heat‑resistant alloys including titanium. How does the Tiger‑tec Gold coating benefit machining? The Tiger‑tec Gold coating on the ADMT10T308R‑F56 WSP45G improves thermal resistance and reduces flank wear, which supports longer tool life and more consistent surface finish. Which geometry advantages does the Parallelogram 85° provide? Parallelogram 85° geometry offers stable engagement and favourable approach angles for shoulder and face milling, enhancing chip evacuation with the F56 chipbreaker. Is the corner radius of 0.8 mm suitable for finishing? A corner radius 0.8 mm provides a balance between edge strength and surface quality; it is suitable for semi‑finishing and general finishing where robustness is required. Can this insert handle interrupted cuts? Yes, the combination of the robust grade WSP45G, the 0.8 mm corner radius and the insert geometry give reliable performance under interrupted cut conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the brands named. The item offered is original, brand‑new goods from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com