ADMT10T308R-G56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of long tool life through Tiger·tec Gold coating, reliable chip control with G56, and stable cutting geometry to maintain productive milling cycles; order directly via Metav Werkzeuge or consult the team for application-specific guidance. ADMT10T308R-G56 WKP35G milling insert — Walter Tools, Tiger·tec Gold coating, for steel and cast iron The ADMT10T308R-G56 WKP35G is a parallelogram milling insert engineered for medium-duty to demanding finishing operations in steel and cast iron, combining a wear-resistant coating with a geometry tuned for consistent chip control. Tiger·tec Gold coating for long tool life Optimised for steel and cast iron machining Parallelogram 85° geometry for stable cutting 0.8 mm corner radius for versatile profiles Durable coating that reduces tool changes and cost per part The core advantage of the insert is its Tiger·tec Gold coating paired with the WKP35G grade, a combination designed to resist abrasive wear and thermal loading during interrupted and continuous cuts. This coated carbide construction improves tool life, which reduces tool change frequency and contributes to a lower cost per component in serial production. For operations that demand predictable wear behaviour, the coated surface and modern substrate chemistry offer improved process stability compared with uncoated grades. Geometry tailored for repeatable stability and surface quality The insert’s Parallelogram 85° form and 15° clearance angle produce a reliable engagement angle that supports stable milling and consistent surface finish. The 0.8 mm corner radius balances edge strength with the ability to achieve fine profiles, making the geometry suitable for a range of finishing passes. The plate thickness T3 and M tolerance class contribute to secure clamping and repeatable positioning in standard milling cutters, reducing vibration and increasing repeatability across tool life. Chip control and material range optimised for production use Equipped with the G56 chipbreaker, the cutting edge is configured to break and evacuate chips efficiently when machining steel (ISO group P) and cast iron (ISO group K). The chipformer design reduces the risk of re-cutting and supports higher feed rates where the process allows, improving productivity without compromising surface integrity. The WKP35G grade is explicitly developed for these material groups, aligning substrate hardness and coating characteristics to typical heat and deformation patterns encountered in cutting. Practical benefits for workshop integration and tool management The indexable format allows for quick insert changes and consistent clamping accuracy, supporting lean tool management. The designation and series information highlight compatibility with tooling systems that accept the ADMT geometry, simplifying inventory choices. With its balance of wear resistance and geometry, the insert is particularly suited to jobbing and small-series production where efficiency and predictable tool performance are priorities. For application advice on Walter Tools milling inserts or to specify the ADMT10T308R-G56 WKP35G for a particular machining set-up, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav Werkzeuge’s technical consultants can advise on cutter selection, speeds and feeds, and optimal clamping solutions. Technical data Article number: ADMT10T308R-G56-WKP35G-WALTER Designation: ADMT10T308R-G56 ISO designation: ADMT10T308R-G56 WKP35G Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 0.8 mm Plate size: 10 mm Plate thickness: T3 Plate form: Parallelogram 85° Tolerance class: M Special features Series: Tiger·tec Gold Grade: WKP35G Coating: Tiger·tec Gold (coated carbide) Chipbreaker: G56 Material suitability: steel (ISO P), cast iron (ISO K) Execution: T FAQ Which materials is this insert suitable for? The ADMT10T308R-G56 WKP35G from Walter Tools is designed primarily for steel (ISO group P) and cast iron (ISO group K); the WKP35G grade and G56 chipbreaker are tuned for these materials. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the insert enhances wear resistance and thermal stability, extending life and maintaining cutting-edge integrity during extended production runs with ADMT10T308R-G56 WKP35G. How does the G56 chipbreaker influence machining? The G56 chipbreaker promotes controlled chip formation and evacuation, lowering the chance of re-cutting and improving surface finish when machining steels and cast irons with this Walter Tools plate. Is the geometry suitable for finishing passes? Yes—the Parallelogram 85° geometry combined with a 0.8 mm corner radius provides stability and a fine profile suitable for finishing operations while preserving edge strength. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original factory-new goods of the manufacturer.
ADMT10T308R-G56 WSM35G WSM35G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold coating and the WSM35G grade delivers stable cutting edges and reliable chip control via the G56 chipformer, making the insert suitable for stainless steel and tough superalloys; order directly via Metav Werkzeuge or consult our specialists for application matching. ADMT10T308R-G56 WSM35G – Milling indexable insert, Tiger‑tec Gold coating, G56 chipformer | Walter Tools A ADMT10T308R-G56 WSM35G milling insert engineered for stable, productive machining of stainless steel and heat‑resistant superalloys. Tiger‑tec Gold coating for high thermal stability WSM35G grade for stainless steel and superalloys G56 chipformer for reliable chip control Parallelogram 85° shape, 0.8 mm corner radius High‑temperature coating and grade for demanding materials The combination of the Tiger‑tec Gold coating and the WSM35G carbide grade delivers improved resistance to thermal and mechanical wear when machining difficult alloys. The coating technology supports a robust cutting edge, while the substrate grade is optimised for applications on stainless steel and heat‑resistant superalloys, reducing the likelihood of built‑up edge and premature flank wear. As a result, the insert contributes to longer tool life and steadier component quality in continuous production runs. Geometry tailored for stability and predictable tool life The parallelogram 85° platform paired with a 0.8 mm corner radius and a 15° free angle provides a controlled engagement with the workpiece and an effective load distribution at the cutting edge. The medium thickness (T3) contributes to mechanical stability under intermittent and continuous cutting conditions, while the insert form supports radial and axial cutting strategies. These geometric choices lower the risk of chipping and enable consistent surface finishes when machining tough materials. Chip control and process reliability on the shop floor The integrated G56 chipformer supports predictable chip fragmentation and evacuation, which is particularly important when machining sticky or heat‑sensitive alloys. Reliable chip control reduces tool re‑adjustment and machine downtime, improving overall process efficiency. Combined with the Tiger‑tec Gold system, the insert fosters repeatable performance across batches, helping achieve stable cycle times and fewer rejects during series production. Practical application notes and selection guidance This insert is recommended for operations where stainless steel or superalloys impose thermal and mechanical demands on the tool. Selection of cutting strategy and feed per tooth should match the component material and machine rigidity; the insert’s coated grade and geometry make it a solid choice for both roughing and semi‑finishing operations on demanding alloys. For specific machine‑tool pairings or detailed parameter recommendations, technical consultation is available to ensure optimal integration into existing cutting processes. For tailored advice or to order the ADMT10T308R-G56 WSM35G insert by Walter Tools, contact Metav Werkzeuge for application support and availability via eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930 Technical data Article number: ADMT10T308R-G56-WSM35G-WALTER Item designation: ADMT10T308R-G56 WSM35G Manufacturer: Walter Tools Numeric data Free angle: 15° Corner radius: 0.8 mm Plate shape: Parallelogram 85° Plate size: 10 Thickness: T3 Tolerance class: M Materials & special features Series: Tiger‑tec Gold Grade: WSM35G (coated cemented carbide) Chipformer: G56 Suitable for: stainless steel; heat‑resistant superalloys and titanium (S / M) Substrate material: S / M FAQ What materials is this insert designed for? The ADMT10T308R-G56 WSM35G milling insert from Walter Tools is designed for stainless steel and for heat‑resistant superalloys and titanium, matching the WSM35G grade and Tiger‑tec Gold coating. What advantages does the Tiger‑tec Gold system provide? Tiger‑tec Gold increases thermal stability and wear resistance on the cutting edge; the ADMT10T308R-G56 WSM35G insert benefits from these properties to maintain performance when machining demanding materials. How does the G56 chipformer affect machining? The G56 chipformer on this insert promotes controlled chip breakage and evacuation, reducing the risk of entangling chips and improving process reliability for longer production cycles. Which geometric features support stability during milling? The parallelogram 85° shape combined with a 15° free angle and a 0.8 mm corner radius gives the ADMT10T308R-G56 WSM35G insert mechanical stability and even load distribution, lowering the risk of chipping and supporting consistent surface quality. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world‑leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned only for clarification; there is no affiliation between Metav Werkzeuge and the named manufacturers. The offered article is an original, factory‑new product of the manufacturer.
ADMT10T308R-G56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a precise parallelogram geometry for stable chip control and extended tool life; order directly via Metav Werkzeuge or consult the team for application-specific advice. ADMT10T308R-G56 WSP45G indexable milling insert — Tiger·tec Gold, for steel, stainless and high-temperature alloys (Walter Tools) The ADMT10T308R-G56 WSP45G is an indexable milling insert designed for versatile milling operations, combining a tough PVD-coated grade with a secure parallelogram seat and chip control suitable for demanding materials Tiger·tec Gold PVD-coated grade WSP45G Suitable for steel, stainless and superalloys Parallelogram 85° shape for secure clamping 15° relief angle with 0.8 mm corner radius Durable coating for consistent productivity The insert utilises the Tiger·tec Gold technology: a PVD-coated carbide that balances wear resistance and edge toughness. This combination supports stable chip formation across a wide range of cutting conditions, reducing unplanned tool changes and improving uptime. The WSP45G grade has been developed for milling and is especially effective where mixed batches of steel and more demanding alloys are processed. In practice, the coating reduces flank wear and helps maintain dimensional stability over longer tool lives, which in turn supports predictable process planning and lower per-part tooling costs. Geometry engineered for secure clamping and predictable results A parallelogram 85° plate form provides a robust clamping interface that minimises insert movement under load and improves repeatability. The geometry, together with a 15° relief angle and 0.8 mm corner radius, is tuned for reliable edge strength and favourable load distribution during intermittent cuts. The integrated chipbreaker G56 controls chip flow to reduce heat concentration at the cutting edge and to promote consistent surface finish. The plate thickness (T3) contributes to mechanical rigidity, allowing stable feeds and cutting depths that preserve both tool life and component quality. Broad material applicability and practical application notes The WSP45G grade targets the ISO groups P / M / S — unalloyed and alloyed steel, stainless steel, and heat-resistant superalloys or titanium — making the insert a versatile choice for mixed-production environments. Its toughness and thermal resilience make it suitable for operations where heat and built-up edge are a concern. For best results, combine the insert’s geometry and chipbreaker with appropriate feed rates and coolant strategy for the workpiece material; the result is improved process security and reproducible surface quality. The Walter Tools series offers predictable behaviour in both roughing and semi-finishing milling tasks, supporting streamlined machining workflows. Discuss Walter Tools Tiger·tec Gold inserts with Metav Werkzeuge for tailored recommendations and to specify the best grade and geometry for the intended application — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: ADMT10T308R-G56-WSP45G-WALTER Designation: ADMT10T308R-G56 WSP45G Series: Tiger·tec Gold Brand: Walter Tools Facts Relief angle: 15° Corner radius: 0.8 mm Plate size: 10 mm Plate thickness: T3 Plate form: Parallelogram 85° Chipbreaker: G56 Tolerance class: M Special features Coating: PVD-coated cemented carbide Grade: WSP45G Material applicability: P / M / S (steel, stainless steel, superalloys/titanium) Designation details: ADMT10T308R-G56 Series description: Tough, versatile PVD grade optimised for milling FAQ What materials is this insert suitable for? The ADMT10T308R-G56 WSP45G insert is specified for ISO groups P, M and S, meaning it is suitable for steel, stainless steel and heat-resistant superalloys including titanium. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold provides wear resistance and edge stability; the coating on the WSP45G grade helps extend tool life and supports consistent chip formation under varying cutting conditions. What advantages does the parallelogram 85° shape offer? The 85° parallelogram geometry improves clamping security and repeatability, which reduces the risk of insert movement under load and contributes to more consistent machining results. Is the chipbreaker suitable for both roughing and finishing? The G56 chipbreaker is designed to control chip flow and heat at the cutting edge, making it effective for a range of milling tasks from robust material removal to controlled semi-finishing passes. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT10T312R-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WKP35G grade for extended edge life and consistent chip control when machining steel and cast iron; the parallelogram 85° geometry and 15° clearance support stable cutting conditions. Order the ADMT10T312R-F56 WKP35G directly via Metav Werkzeuge or consult our specialists for process-adapted recommendations. ADMT10T312R-F56 WKP35G milling indexable insert — Tiger·tec Gold, for steel and cast iron (Walter Tools) The ADMT10T312R-F56 WKP35G is a parallelogram 85° milling insert designed for productive chip control and robust edge life in steel and cast iron applications. Tiger·tec Gold coating for extended tool life Optimised for steel and cast iron machining Parallelogram 85° form with 15° clearance Corner radius 1.2 mm for robust edge strength F56 chipbreaker for controlled chip formation Maximised productivity through advanced coating and grade The combination of the Tiger·tec Gold coating and the WKP35G coated carbide grade delivers measurable gains in tool life and process reliability. The coating technology reduces abrasive wear and improves heat resistance, so cutting edges retain geometrical integrity for longer periods; this translates into fewer tool changes and higher machine uptime. The economic benefit is direct: improved tool life reduces tooling costs per component while sustaining consistent dimensional accuracy during longer tool cycles. Stable cutting geometry for repeatable results The insert’s parallelogram 85° form and 15° clearance angle deliver secure seat stability and predictable cutting forces, which is especially valuable in interrupted cuts and heavy roughing. The 1.2 mm corner radius increases edge robustness and resists chipping under fluctuating loads, while the F56 chipbreaker is optimised to produce short, controlled chips when machining steels and cast irons. These geometry choices reduce vibration and help maintain a steady surface finish, supporting higher metal removal rates without sacrificing process security. Application spectrum and process advice for industrial use Designed for the ISO P and K groups, this indexable insert suits a broad range of unalloyed and alloyed steels as well as cast iron. The insert is supplied in the series Tiger·tec Gold and the specific grade WKP35G, which is tuned for the typical thermal and mechanical demands of these materials. For machining plans requiring high cutting speeds or abrasive cast iron types, the insert’s coating and chip control characteristics contribute to consistent performance. For tailored recommendations on feeds, speeds and clamping, Metav Werkzeuge’s technical advisers can provide machining parameters matched to machine rigidity and workpiece material. Contact Metav Werkzeuge for tailored tool selection and application support on Walter Tools Tiger·tec Gold inserts to ensure optimal machining performance Technical Data Article number: ADMT10T312R-F56-WKP35G-WALTER Designation: ADMT10T312R-F56 WKP35G Product type: Fräswendeschneidplatte (milling indexable insert) Brand: Walter Tools Series: Tiger-tec Gold Facts Free angle: 15° Corner radius: 1.2 mm Plate form: Parallelogramm 85° Plate size: 10 Plate thickness: T3 Tolerance class: M Special features Chipbreaker: F56 Grade: WKP35G (coated carbide) Material suitability: P (steel), K (cast iron) Material designation: P / K FAQ What materials is this insert suitable for? The ADMT10T312R-F56 WKP35G is designed for ISO groups P and K, making it suitable for machining a wide range of steels and cast irons. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating on the WKP35G grade reduces abrasive wear and improves heat resistance, which prolongs edge life and maintains cutting performance under demanding conditions. What benefits does the 85° parallelogram form provide? The parallelogram 85° form offers secure seating and predictable cutting forces, improving stability in interrupted cuts and enabling consistent results in roughing operations. Is the F56 chipbreaker suitable for long continuous cuts? The F56 chipbreaker is optimised for controlled, short chip formation in steels and cast irons, supporting both interrupted and continuous cutting where effective chip control is required. Which specifications are important when replacing existing inserts? Match the designation ADMT10T312R-F56 WKP35G and the plate form (parallelogram 85°), corner radius (1.2 mm) and thickness (T3) to ensure compatibility with the tool holder and intended cutting strategy. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original, brand-new goods from the manufacturer.
ADMT10T312R-F56 WKP35S Wendeplatten - Walter Tools
The combination of the Tiger-tec Silver coating and the WKP35S grade delivers high process security and long tool life for demanding steel and cast iron operations; the parallelogram 85° geometry with a 15° free angle and r1.2 corner radius ensures stable depth cutting and consistent surface results. Order the ADMT10T312R-F56 WKP35S directly via Metav Werkzeuge or consult the technical team for application-specific advice. ADMT10T312R-F56 WKP35S milling indexable insert — Parallelogram 85°, r1.2 — Walter Tools The ADMT10T312R-F56 WKP35S is a parallelogram 85° milling insert engineered for productive roughing and semi-finishing of steel and cast iron components in industrial milling applications Tiger·tec Silver coating, WKP35S grade Designed for steel and cast iron machining Parallelogram 85° geometry for depth cuts 15° free angle and r1.2 corner radius Chipbreaker F56 for reliable chip control Optimised cutting performance for steel and cast iron The coated carbide WKP35S grade from the Tiger-tec Silver family is formulated to manage the thermal and abrasive conditions typical of machining steel and cast iron. The combination of a wear-resistant coating and a robust substrate provides predictable flank wear behaviour and extended edge life, which reduces unplanned tool changes and increases machine uptime. This results in a more economical process where the balance between cutting speed, feed and insert life is optimised for repeatable parts production. Stable geometry that supports deeper cuts and consistent finishes The parallelogram 85° shape with a 15° free angle and an r1.2 corner radius delivers mechanical stability and controlled engagement of the cutting edge. Such geometry helps to distribute cutting forces evenly and to limit vibration during heavier passes, which benefits surface quality and dimensional accuracy. The F56 chipbreaker promotes short, controlled chips, reducing the risk of chip re-cutting and improving cycle reliability on interrupted or continuous cuts. Coating technology and economical productivity The Tiger-tec Silver coating technology is designed to offer improved heat resistance and friction behaviour compared with uncoated grades, enabling higher cutting speeds in many steel and cast iron applications. The coated surface reduces adhesive and abrasive wear, contributing to a longer service interval and fewer insert changes. By lowering tool-change frequency and stabilising process windows, the insert supports cost-effective machining without compromising repeatability. Contact Metav Werkzeuge today for tailored cutting data and availability of Walter Tools ADMT10T312R-F56 WKP35S inserts Technical data Article number: ADMT10T312R-F56-WKP35S-WALTER Item label: Fräswendeschneidplatte ADMT10T312R-F56 WKP35S Walter Tools Manufacturer: Walter Tools Facts Insert size: 10 Free angle: 15° Corner radius: 1.2 mm Thickness: T3 Shape: Parallelogram 85° Tolerance class: M Special features Grade/series: Tiger-tec Silver, WKP35S Chipbreaker: F56 Material group: coated carbide (P / K) Suitable for: steel (P) and cast iron (K) FAQ Which materials are suitable for this insert? The ADMT10T312R-F56 WKP35S from Walter Tools is specified for machining steel (P) and cast iron (K) according to the grade characteristics of the WKP35S Tiger-tec Silver family. What machining tasks suit the parallelogram 85° geometry? Parallelogram 85° geometry is recommended for stable roughing and semi-finishing where controlled depth of cut and deflection resistance are required; the ADMT10T312R-F56 WKP35S benefits heavy engagement passes and interrupted cuts. How does the F56 chipbreaker affect chip control? The F56 chipbreaker is engineered to produce short, manageable chips in a wide range of feeds and depths, improving process reliability and reducing the risk of chip interference during continuous milling with the WKP35S grade. Can the insert be used for finishing operations? While primarily designed for productive machining, the combination of r1.2 corner radius and the Tiger-tec Silver coating can deliver acceptable surface quality in semi-finishing; for ultra-fine finishing, consider a dedicated finishing geometry. What are the key advantages of the Tiger-tec Silver coating on this insert? Tiger-tec Silver provides improved thermal resistance and abrasion control, enabling higher cutting speeds and longer edge life for the WKP35S grade in many steel and cast iron applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. No affiliation between Metav Werkzeuge and the named brands is implied. The offered item is an original, factory-new product of the manufacturer.
ADMT10T312R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WSM35G grade for secure chip control and extended tool life; order the ADMT10T312R-F56 WSM35G milling insert directly via Metav Werkzeuge or ask the consultants for application advice. ADMT10T312R-F56 WSM35G milling insert by Walter Tools — Tiger·tec Gold for rostfreier Stahl and superalloys ADMT10T312R-F56 WSM35G is a precision milling indexable insert designed for demanding applications in rostfreier Stahl and heat-resistant superalloys, offering a robust cutting geometry and a high-performance coating. Tiger·tec Gold coating for stable edge life WSM35G grade for rostfreier Stahl and superalloys Parallelogram 85° shape for versatile milling 15° relief angle with 1.2 mm corner radius High-performance coating and grade for longer productive runs The combination of the Tiger·tec Gold technology and the WSM35G carbide grade delivers stable cutting-edge behaviour under thermal and mechanical stress. This coating system reduces flank wear and improves resistance to built-up edge, which translates into fewer tool changes and higher machine utilisation. For production managers the result is a measurable increase in process stability and predictable tool life when machining rostfreier Stahl and comparable difficult-to-cut alloys. Geometry engineered for secure chip control and surface quality The parallelogram 85° plate form with a 15° relief angle and 1.2 mm corner radius supports gentle engagement and robust cutting edge support. The geometry helps to distribute cutting forces and promotes consistent chip formation, reducing vibration and improving surface finish. In practical terms, the insert’s shape and edge radius provide reliable repeatability across batches, lowering the risk of rejects and secondary operations. Application range and material compatibility Designed for heavy-duty and heat-prone materials, this indexable insert is optimised for the ISO groups S and M — notably rostfreier Stahl and heat-resistant superalloys including titanium alloys. The coated carbide substrate resists high temperatures and maintains edge integrity during interrupted or continuous cuts. This makes the insert a suitable choice for aerospace components, medical parts and industrial valves where material characteristics demand both thermal stability and edge robustness. Productivity advantages and process security By selecting a Tiger·tec Gold-coated milling insert in the WSM35G grade, workshops benefit from enhanced productivity and reduced downtime. The insert’s combination of wear resistance and stable chip formation supports longer tool life and consistent component quality. Backed by Walter Tools’ design focus on process reliability, the solution contributes to fewer adjustments on the machine and a steadier production rhythm — an outcome that improves overall manufacturing efficiency and confidence in repeatable results. Contact Metav Werkzeuge for application-specific recommendations and request Walter Tools ADMT10T312R-F56 WSM35G inserts for precision machining of rostfreier Stahl and high-temperature alloys Technical data Article number: ADMT10T312R-F56-WSM35G-WALTER Designation: ADMT10T312R-F56 WSM35G Series: Tiger·tec Gold Grade: WSM35G Core data Relief angle: 15° Corner radius: 1.2 mm Plate size: 10 mm Thickness: T3 Plate form: Parallelogram 85° Tolerance class: M Special features Coating: coated carbide (Tiger·tec Gold) Material suitability: S / M Suitable for: rostfreier Stahl (M), superalloys and titanium (S) Chipbreaker: F56 Application: milling indexable insert FAQ Is this insert suitable for machining rostfreier Stahl? Yes. The ADMT10T312R-F56 WSM35G insert is specifically graded and coated for effective performance in rostfreier Stahl, supporting stable chip formation and improved edge life. What effect does the 1.2 mm corner radius have on machining? A 1.2 mm corner radius increases edge strength and contributes to smoother surface finishes under heavy cutting conditions; it reduces the likelihood of edge chipping during interrupted cuts. Which materials are covered by the S / M designation? The S / M designation indicates suitability for heat-resistant superalloys and titanium (S) as well as rostfreier Stahl (M), making the insert versatile for demanding alloy machining. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold enhances thermal resistance and wear performance, which leads to longer tool life, fewer changes and more consistent part quality across production runs. What cutting geometry does the parallelogram 85° form support? The parallelogram 85° form enables versatile approach angles for face and shoulder milling operations while providing robust support for the cutting edge and predictable chip evacuation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, brand-new goods from the manufacturer.
ADMT10T312R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger·tec Gold coating, versatile suitability for Stahl, rostfreier Stahl and heat‑resistant superalloys, and reliable chip control via the F56 chipbreaker for consistent milling results; order the ADMT10T312R-F56 WSP45G milling insert directly via Metav Werkzeuge or ask our consultants if needed. ADMT10T312R-F56 WSP45G milling insert — Tiger·tec Gold, 85° parallelogram, Walter Tools The ADMT10T312R-F56 WSP45G is a Tiger·tec Gold‑grade milling insert designed for productive finishing and semi‑finishing in demanding industrial milling applications. Tiger·tec Gold PVD coating for edge stability Suitable for Stahl, rostfreier Stahl and superalloys Parallelogram 85° form with 1.2 mm corner radius Chipbreaker F56 for secure chip control Longer, more predictable tool life for continuous production The PVD‑coated Tiger·tec Gold grade WSP45G provides a balanced combination of toughness and wear resistance, making it well suited to interrupted cuts and mixed workpiece batches. The advanced coating reduces flank wear and supports a stable cutting edge, which translates into fewer tool changes and less unplanned downtime. With a corner radius of 1.2 mm and a 15° clearance angle, the insert maintains strength at the cutting edge while delivering consistent surface quality. This results in measurable gains in process reliability and repeatability for production environments. Secure chip control and dimensional stability for reliable cycles The integrated chipbreaker F56 and the parallelogram 85° geometry are engineered to control chip formation across a range of cutting conditions. The chipbreaker promotes predictable chip flow and reduces the risk of built‑up edge, while the parallelogram form improves positional stability in the pocket. Combined with the insert’s nominal thickness T3, these design elements reduce vibration and support repeatable results—especially during heavy engagement or variable feed rates—helping to maintain cycle times and quality standards in serial manufacturing. One insert for diverse, high‑demand materials Optimised for the ISO groups P / M / S, the grade supports machining of Stahl, rostfreier Stahl and heat‑resistant superalloys including titanium alloys. The composition of the coated carbide ensures thermal stability and edge robustness when cutting materials that generate high temperatures or demand secure chip evacuation. For shops that run mixed lots or switch between stainless and high‑temperature alloys, the insert offers a cost‑effective route to fewer tool variants and simpler tool management, without compromising surface finish or component tolerances. Contact Metav Werkzeuge for an application assessment and availability of Walter Tools ADMT10T312R-F56 WSP45G inserts and tailored machining recommendations Technical data SKU: ADMT10T312R-F56-WSP45G-WALTER Product: ADMT10T312R-F56 WSP45G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Corner radius: 1.2 mm Clearance angle: 15° Parallelogram angle: 85° Plate size: 10 Thickness: T3 Special features Coating: Tiger·tec Gold (PVD) Chipbreaker: F56 Grade: WSP45G (coated carbide) Toleranzklasse: M Material suitability: P / M / S (Stahl, rostfreier Stahl, superalloys / titanium) Form: Parallelogramm 85° FAQ Which materials are recommended for this insert? The ADMT10T312R-F56 WSP45G is specified for ISO groups P / M / S, meaning it is suitable for machining Stahl, rostfreier Stahl and heat‑resistant superalloys including titanium alloys. What benefit does the Tiger·tec Gold coating provide? Tiger·tec Gold is a PVD coating that increases wear resistance and thermal stability, giving the WSP45G grade improved edge life and consistent performance under elevated cutting temperatures. How does the F56 chipbreaker affect machining? The F56 chipbreaker is designed to produce predictable chip forms and controlled evacuation, which reduces the risk of built‑up edge and supports stable cutting forces during continuous production. What geometry advantages does the parallelogram 85° form offer? The 85° parallelogram form improves pocket seating and cutting orientation, enhancing dimensional stability and allowing effective engagement angles for face and shoulder milling operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the mentioned brands. The offered item is original, factory‑new goods from the manufacturer.
ADMT10T316R-F56 WKP35G Wendeplatten - Walter Tools
Combining Tiger·tec Gold coating with the WKP35G grade delivers improved wear resistance and consistent chip control when machining steel and cast iron; the parallelogram 85° geometry and 1.6 mm corner radius provide robust edge strength and stable performance. Order the ADMT10T316R-F56 WKP35G milling insert via Metav Werkzeuge or consult our specialists for application-specific advice. ADMT10T316R-F56 WKP35G milling insert for steel and cast iron by Walter Tools ADMT10T316R-F56 WKP35G is a high-performance milling indexable insert optimised for general milling of steel and cast iron, combining Tiger·tec Gold coating technology with a robust parallelogram geometry. Tiger·tec Gold coated carbide grade WKP35G Optimised for steel and cast iron machining Parallelogram 85° geometry, 1.6 mm corner radius Proven wear resistance for demanding milling The coated cemented carbide grade WKP35G from the Tiger·tec Gold family is designed to withstand the thermal and mechanical stresses typical of steel and cast iron machining. The coating improves oxidation resistance and reduces flank wear, which translates into longer tool life and fewer index changes. For workshops that demand predictable performance, the insert’s combination of a high-grade coating and tungsten-carbide substrate gives measurable benefits in process stability and consistent surface finish. This is particularly relevant for interrupted cuts and mixed-batch production where tool reliability reduces downtime and contributes to overall productivity. Stable chip control and cutting geometry benefits The parallelogram 85° form and the F56 chipbreaker are engineered to produce controlled chip formation across a wide range of feeds and depths of cut. The insert’s 15° relief angle reduces rubbing and helps maintain a sharp cutting edge under load, while the 1.6 mm corner radius provides a balance between edge strength and finish quality. For applications in the ISO P and K groups, this geometry supports reliable evacuation of chips and lowers the risk of built-up edge or vibration, leading to repeatable results and improved cycle times. The result is a more efficient machining process with fewer rejects and consistent component tolerance adherence. Practical selection and workshop application guidance Selection of the ADMT10T316R-F56 WKP35G should focus on matching the grade and geometry to the work material and machining strategy. The WKP35G grade is suited for both steel (ISO P) and cast iron (ISO K), making it a versatile choice when a single insert must cover varied jobs. The T3 thickness and M tolerance class support secure clamping and repeatable positioning in common milling cutters. For milling sequences that alternate between roughing and finishing, the insert’s wear behaviour and chip control permit extended tool life while preserving surface quality. When in doubt about the most efficient cutting parameters, a brief consultation on feed and speed for specific alloys will optimise results and protect tool investment. Contact Metav Werkzeuge for tailored recommendations and availability of Walter Tools Tiger·tec Gold inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: ADMT10T316R-F56-WKP35G-WALTER Designation: ADMT10T316R-F56 WKP35G Series: Tiger-tec Gold Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 1.6 mm Insert size: 10 Thickness: T3 Tolerance class: M Special features Grade: WKP35G Coating: Tiger·tec Gold (coated cemented carbide) Chipbreaker: F56 Geometry: Parallelogram 85° Material compatibility: Steel (P) and Cast iron (K) FAQ Which materials is this insert suitable for? The ADMT10T316R-F56 WKP35G insert by Walter Tools is suitable for machining steel (ISO P) and cast iron (ISO K) as indicated by its WKP35G grade and Tiger·tec Gold coating. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold increases oxidation and wear resistance on the cutting edge, improving the ADMT10T316R-F56 WKP35G insert’s life and stabilising machining conditions for more consistent finishes. What benefit does the parallelogram 85° geometry provide? The parallelogram 85° shape offers favourable cutting angles for face and shoulder milling, improving engagement control and supporting efficient chip evacuation with the F56 chipbreaker. Is the 1.6 mm corner radius suitable for finishing operations? A 1.6 mm corner radius on this insert balances edge strength and surface quality, making it appropriate for medium finishing where a robust edge and good finish are required. What tolerance and thickness specifications are relevant for tool holders? The insert comes in thickness T3 with tolerance class M, ensuring precise seating and repeatable positioning in compatible milling cutters for reliable clamping. The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Protected trademarks and brand names are mentioned for clarification; the offered article is original and brand new. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT10T316R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a 15° relief angle and a 1.6 mm corner radius for consistent cutting performance and long tool life; order via Metav Werkzeuge or contact the team for application advice. ADMT10T316R-F56 WKP35S — milling indexable insert, Tiger·tec Silver, for steel and cast iron (Walter Tools) The ADMT10T316R-F56 WKP35S is a parallelogram milling insert engineered for productive machining of steel and cast iron, offering a 15° relief angle and a robust 1.6 mm corner radius for reliable edge strength. Tiger·tec Silver coating for stable cutting Suited for steel and cast iron machining Parallelogram 85° form for versatile indexing 1.6 mm corner radius for robust edge High process reliability for steel and cast iron The coated carbide grade WKP35S from the Tiger·tec Silver series delivers high process reliability when machining steels and cast-iron grades. The combination of a wear-resistant coating and a substrate optimised for typical steel heat generation reduces flank wear and extends the interval between index changes. For production environments this means fewer interruptions and more consistent component quality, supporting predictable cycle times and better throughput. Geometry that increases productivity and tool life The parallelogram 85° shape and the 15° relief angle promote stable engagement and simpler insert indexing, while the F56 chipbreaker controls chip form across a variety of cutting conditions. The 1.6 mm corner radius strengthens the cutting edge against impact and contributes to a more even wear pattern. For workshop planners and process engineers, these geometric choices translate into a balance between feed rates and surface quality, enabling efficient metal removal without sacrificing component finish. Practical advantages and easy integration into existing toolholders As a standard indexable insert in size 10 with thickness designation T3, the insert fits common Walter toolholders designed for this geometry and can be integrated without special adapters. The insert’s tolerance class M ensures repeatable seating and positioning in the pocket, which supports stable runout and consistent dimensional results. The explained terms—such as chipbreaker, relief angle and corner radius—refer respectively to chip control features, the angle that clears the workpiece behind the cutting edge, and the rounded edge that resists chipping; understanding these helps in selecting cutting parameters for the best economy. For technical clarification, quantity inquiries or tailored recommendations on the Walter Tools ADMT10T316R-F56 WKP35S, please contact Metav Werkzeuge for expert advice and rapid delivery options Technical data Article number: ADMT10T316R-F56-WKP35S-WALTER Manufacturer: Walter Tools Facts Insert size: 10 Thickness: T3 Corner radius: 1.6 mm Relief angle: 15° Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Material suitability: P / K (steel and cast iron) Insert form: Parallelogram 85° Chipbreaker: F56 Designation: ADMT10T316R-F56 WKP35S FAQ What materials is this insert designed for? The ADMT10T316R-F56 WKP35S is specified for machining steel and cast iron (designation P / K) and is optimised via the Tiger·tec Silver coating for those material groups. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the WKP35S grade improves wear resistance and thermal stability, which enhances consistency and tool life during serial machining with Walter Tools inserts. Which geometric features improve chip control? The combination of the F56 chipbreaker and the parallelogram 85° form helps to control chip formation and evacuation, supporting secure machining cycles with stable surface results. Is the insert compatible with standard Walter toolholders? Yes, the ADMT10T316R-F56 WKP35S is produced in a common size (10) and thickness (T3) intended for Walter toolholders matching the parallelogram ADMT geometry. What does the tolerance class M mean for workshop use? Tolerance class M indicates standard dimensional accuracy for reliable seating in the tool pocket, contributing to repeatable positioning and consistent machining outcomes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned exclusively for explanation purposes. There is no affiliation between our company and the mentioned brands. The offered article is an original, brand‑new product from the manufacturer.
ADMT10T316R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the robust WSM35G grade and a precise parallelogram 85° geometry for reliable machining of stainless steels and heat-resistant alloys; order directly via Metav Werkzeuge or consult our specialists for application support. ADMT10T316R-F56 WSM35G indexable milling insert — Tiger·tec Gold, 1.6 mm corner radius — Walter Tools The ADMT10T316R-F56 WSM35G is an indexable milling insert designed for demanding machining of stainless steels and heat‑resistant superalloys, combining a Tiger·tec Gold coating with a chipbreaker engineered for stable chip formation. Tiger·tec Gold coating technology Grade WSM35G for stainless & superalloys Parallelogram 85° shape, 15° clearance 1.6 mm corner radius, chipbreaker F56 High-performance grade for difficult-to-machine materials The WSM35G grade, featuring Tiger·tec Gold coating, is formulated to improve process security when working with tough alloys. Its coated cemented‑carbide composition supports stable cutting edges and reduced built‑up edge tendency in stainless steels (ISO group M) and in heat‑resistant superalloys or titanium (ISO group S), depending on the chosen insert geometry. The result is improved tool life and consistent part quality, which translates directly into fewer tool changes and higher throughput in serial production. Geometry and chip control for consistent surface quality The insert’s parallelogram 85° form combined with a 15° relief angle creates favourable cutting forces for milling operations where rigidity and accessibility matter. The 1.6 mm corner radius increases edge strength and contributes to a uniform surface finish, while the chipbreaker F56 manages swarf effectively to avoid entanglement and thermal build‑up. These geometric choices help maintain dimensional accuracy during interrupted cuts and permit productive machining strategies without compromising component integrity. Application guidance and process reliability Marked tolerance class M and the listed applicability S / M indicate suitability primarily for stainless steels and for heat‑resistant superalloys or titanium, depending on component demands and tool configuration. This insert is appropriate where secure chip formation and a robust cutting edge are needed under elevated thermal load. For process integration and holder compatibility, technical clarifications or cutting parameter recommendations are available on request. Are there uncertainties about whether this insert suits a specific task or are additional technical data required? Please contact our team by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for tailored advice. Contact Metav Werkzeuge today to discuss application‑specific recommendations and availability for the Walter Tools ADMT10T316R-F56 WSM35G indexable milling insert. Technical Data Article number: ADMT10T316R-F56-WSM35G-WALTER Designation: ADMT10T316R-F56 Series: Tiger·tec Gold Grade: WSM35G Brand: Walter Tools Numerical Data Corner radius: 1.6 mm Relief angle: 15° Shape: Parallelogram 85° Size: 10 Thickness: T3 Tolerance class: M Special features Chipbreaker: F56 Material applicability: S / M Suitable for: stainless steels, heat‑resistant superalloys and titanium (depending on geometry) Coating technology: Tiger·tec Gold FAQ Which materials is this insert suitable for? The ADMT10T316R-F56 WSM35G insert from Walter Tools is specified for stainless steels (ISO group M) and for heat‑resistant superalloys/titanium (ISO group S), with application depending on the chosen geometry and cutting conditions. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WSM35G grade improves thermal resistance and wear behaviour, supporting stable cutting edges and better chip control during extended milling cycles. What effect does the 1.6 mm corner radius have? A 1.6 mm corner radius increases edge strength and helps achieve a consistent surface finish; it is particularly beneficial where a balance between tool life and workpiece geometry is required. Which insert features control chip formation? Chip formation is managed by the F56 chipbreaker in combination with the parallelogram geometry and the Tiger·tec Gold coating, together providing secure swarf flow and reduced risk of built‑up edge. What is the SKU and series information? The SKU is ADMT10T316R-F56-WSM35G-WALTER, belonging to the Tiger·tec Gold series by Walter Tools; refer to this identifier when enquiring about supply or holder compatibility. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT10T316R-F56 WSM45X T Wendeplatten - Walter Tools
Take advantage of the proven combination of WSM45X coated carbide for stable chip formation and the robust 85° parallelogram geometry to increase process reliability and milling throughput; order the ADMT10T316R-F56 WSM45X directly via Metav Werkzeuge or ask our consultants if needed ADMT10T316R-F56 WSM45X — Indexable milling insert for stainless steel and superalloys (Walter Tools) The ADMT10T316R-F56 WSM45X is a coated carbide milling insert engineered for demanding operations on stainless steels and heat‑resistant superalloys, offering stable cutting edges and consistent chip control in high‑stress milling applications Coated carbide grade WSM45X Optimised for stainless steel and superalloys Parallelogram 85° insert form 1.6 mm corner radius for edge strength Performance gains when machining difficult materials The Walter grade WSM45X combines a coated carbide substrate with a chemistry tuned for thermally demanding cutting tasks, delivering stable chip formation and improved edge retention when milling stainless steel and high‑temperature alloys. This engineered composition reduces the tendency for built‑up edge and supports longer productive cutting intervals, which in turn raises component throughput and reduces unplanned tool changes. The result is measurable efficiency: more consistent cycle times and fewer interruptions in serial production. Geometry that secures surface quality and tool life The insert’s 85° parallelogram shape and 15° relief angle are designed for secure clamping in indexable milling cutters and for favourable cutting forces in shoulder and face milling. The F56 chipbreaker promotes predictable chip flow and reduces heat concentration at the cutting edge, while the 1.6 mm corner radius increases mechanical edge stability under interrupted cuts. Together these geometric features contribute to reproducible surface finish and longer life of the cutting edge, so single‑insert performance translates into process reliability across production runs. Workshop practicality and application range As a member of Walter’s open series, the WSM45X grade is a coated carbide solution intended for ISO groups M and S, meaning it is particularly suited to stainless steel and heat‑resistant superalloys (and, depending on geometry, titanium). The insert format ADMT10T316R‑F56 supports easy indexing and replacement, minimising downtime in cell or shop‑floor settings. For plants seeking to standardise tooling for demanding alloys, this insert offers a balance of edge life and chip control that helps secure reproducible component quality and increased machine utilisation. For further specification matching and grade selection guidance, Metav Werkzeuge consultants can advise on ideal cutting parameters and holder compatibility. Contact Metav Werkzeuge today to reserve Walter Tools ADMT10T316R-F56 WSM45X inserts for stainless‑steel and superalloy applications and secure tailored advice for cutter integration Technical data Article number: ADMT10T316R-F56-WSM45X-WALTER Label: Fräswendeschneidplatte ADMT10T316R-F56 WSM45X Walter Tools Product type: Indexable milling insert Series: Walter Schneidstoffsorte - Serie offen Grade: WSM45X Key figures Insert size: 10 Insert thickness: T3 Relief angle: 15° Corner radius: 1.6 mm Insert shape: parallelogram 85° Tolerance class: M Special features Coating: coated carbide (WSM45X) Chipbreaker: F56 Material groups: suitable for ISO M (stainless steel) and ISO S (superalloys/titanium) Application focus: heavy‑duty machining and demanding stainless‑steel operations FAQ What materials are best suited to this insert? The ADMT10T316R‑F56 WSM45X insert is specified for ISO group M (stainless steel) and ISO S (heat‑resistant superalloys and titanium), providing reliable chip control and edge stability in these materials. Which geometric features improve performance in shoulder milling? The 85° parallelogram shape, 15° relief angle and 1.6 mm corner radius of this insert work together to reduce cutting forces and support stable clamping, enhancing surface quality and tool life during shoulder milling. How does the WSM45X grade affect chip formation? WSM45X is a coated carbide formulation that promotes stable chip formation and resists built‑up edge; this leads to fewer interruptions, more consistent cycle times and improved process reliability when cutting stainless steel and superalloys. Can the insert be used in standard ADMT toolholders? The ADMT10T316R‑F56 geometry corresponds to common ADMT parallelogram insert pockets; compatibility is expected with holders designed for ADMT‑style inserts, but verification with the chosen cutter body is recommended. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (market appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and brand names remain the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
ADMT10T316R-F56 WSP45G Wendeplatten - Walter Tools
Combine the Tiger·tec Gold WSP45G PVD-coated carbide with the parallelogram 85° geometry and a 1.6 mm corner radius to achieve reliable chip control and extended edge life in both roughing and finishing operations; order the insert via Metav Werkzeuge or contact consultants if further process data are required. ADMT10T316R-F56 WSP45G milling insert (Parallelogram 85°, 15° relief) — Walter Tools The ADMT10T316R-F56 WSP45G milling insert is a versatile, PVD-coated carbide solution designed for milling steel, stainless steel and heat‑resistant alloys in general milling applications. Tiger·tec Gold PVD-coated grade WSP45G Parallelogram 85° insert geometry 15° relief angle for stable chip control 1.6 mm corner radius for robust edges Consistent performance from a high‑temperature PVD grade The WSP45G grade, part of the Tiger·tec Gold series, is a PVD-coated carbide engineered for a balance of toughness and wear resistance. Its microstructure and coating combination promote stable chip formation when machining typical steel grades and the tougher materials listed under ISO group P, M and S. This results in fewer interruptions for edge dressing and contributes directly to predictable tool life and lower overall machining costs. The technical design supports both intermittent and continuous cuts, reducing the risk of edge chipping under variable cutting forces. Geometry engineered to improve process stability and surface quality The insert’s parallelogram 85° form and 15° relief angle provide a secure seating and cutting engagement that favours directional milling strategies. A 1.6 mm corner radius increases edge strength and helps deliver a balanced surface finish during light finishing passes, while still allowing productive material removal in heavier cuts. The combination of geometry and chipbreaker designation F56 promotes controlled chip breaking and evacuation, which is especially beneficial when machining stainless or heat‑resistant alloys where chip control is critical for cycle reliability. Practical advantages for workshop productivity and flexibility This insert is suitable for both roughing and finishing, offering process reliability across steel, stainless steel and superalloys/titanium applications. The robust design minimises downtime for insert changes and supports repeatable set‑ups, making it a pragmatic choice for job shops and production lines seeking consistency. For customers requiring additional cutting data or tailored feed/speed recommendations, Metav Werkzeuge can supply process charts and application advice to match the insert with specific machine and workpiece conditions. For Walter Tools Tiger·tec Gold applications, contact Metav Werkzeuge for availability, process recommendations and delivery options via info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical Data SKU: ADMT10T316R-F56-WSP45G-WALTER Designation: ADMT10T316R-F56 WSP45G Type: milling insert Brand: Walter Tools Grade: WSP45G Facts Corner radius: 1.6 mm Relief angle: 15° Insert size: 10 Thickness: T3 Shape angle: Parallelogram 85° Tolerance class: M Special features Series: Tiger·tec Gold Coating: PVD (Tiger·tec Gold) Material: coated carbide Chipbreaker: F56 Applicable material groups: P (steel), M (stainless steel), S (superalloys / titanium) Applications: versatile roughing and finishing FAQ What materials can be machined with this insert? The ADMT10T316R-F56 WSP45G insert is specified for ISO groups P, M and S, meaning it is suitable for steel, stainless steel and heat‑resistant alloys including titanium. How does the F56 chipbreaker affect machining? The F56 chipbreaker on the WSP45G grade aids controlled chip formation and evacuation, improving consistency in both continuous and interrupted cuts when using the ADMT10T316R-F56 insert. Is this insert suitable for finishing passes? Yes, the 1.6 mm corner radius and the insert geometry support fine finishing passes as well as productive roughing operations with the ADMT10T316R-F56 WSP45G. Which coating technology is used and what is its benefit? The insert uses the Tiger·tec Gold PVD coating, which combines wear resistance and toughness to extend edge life and maintain process stability over long runs. Are there specific seating or clamping recommendations? Secure seating in the correct pocket orientation for a parallelogram 85° insert is essential; ensure the cutter body and clamp are rated for the ADMT10T316R-F56 geometry to maintain repeatable results. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only; there is no affiliation between our company and the brands. The offered article is original and brand new.
ADMT10T320R-F56 WKP35G Wendeplatten - Walter Tools
Benefit from a blend of wear-resistant Tiger·tec Gold coating and the WKP35G grade for steady tool life and predictable machining results; the 15° relief and parallelogram geometry ensure reliable axial milling and good surface finish. Order the insert directly via Metav Werkzeuge or contact our consultants for tailored advice. ADMT10T320R-F56 WKP35G indexable milling insert — Tiger·tec Gold, 15° relief (Walter Tools) ADMT10T320R-F56 WKP35G is an indexable milling insert optimised for steel and cast‑iron machining, combining a coated carbide grade with a chipbreaker tuned for stable chip control. Tiger·tec Gold coating for wear resistance Grade WKP35G for steel and cast iron Parallelogram 85° geometry for axial milling 15° relief angle and 2 mm corner radius Engineered for consistent production performance The combination of Tiger·tec Gold coating and the WKP35G carbide grade provides a robust basis for high‑volume machining of steel and cast iron. The coating improves thermal resistance and reduces abrasive wear, which translates into fewer insert changes and longer uninterrupted cycles. By favouring stable chip formation, the insert supports steady cutting forces and helps maintain machine uptime, making it a rational choice where efficiency and reproducibility are priorities. Predictable edge life and improved surface quality The parallelogram 85° geometry with a 15° relief angle and 2 mm corner radius is designed to deliver a balance between strength and edge sharpness. The geometry supports axial milling operations with controlled cutting engagement, while the integrated F56 chipbreaker assists in producing short, manageable chips on both P (steel) and K (cast iron) workpieces. The result is a more consistent surface finish and fewer disruptive tool changes, directly supporting cost‑effective production. Practical integration and material guidance Small dimensions such as the nominal 10 mm insert size and T3 thickness make this insert suitable for a broad range of standard milling holders; tolerance class M ensures interchangeability within commercial tool systems. The designation P / K indicates compatibility with unalloyed and alloyed steels and with cast‑iron materials according to ISO 513 conventions. For process planning, the grade’s behaviour under typical steel and cast‑iron cutting conditions reduces trial‑and‑error and shortens ramp‑up times on new components. Contact Metav Werkzeuge today for ordering and process recommendations on Walter Tools inserts like ADMT10T320R-F56 WKP35G — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert technical support and reliable supply. Technical data Article number: ADMT10T320R-F56-WKP35G-WALTER Designation: ADMT10T320R-F56 WKP35G Product type: Milling indexable insert Brand: Walter Tools Series: Tiger·tec Gold Facts Relief angle: 15° Corner radius: 2 mm Insert size: 10 mm Thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WKP35G (coated carbide) Chipbreaker: F56 Geometry: Parallelogram 85° Material suitability: Steel (P), Cast iron (K) FAQ Which materials can this insert machine effectively? The ADMT10T320R-F56 WKP35G is specified for steel (P) and cast iron (K) applications, with its grade and coating tailored to the thermal and abrasive demands of these materials. What advantage does the Tiger·tec Gold coating provide? Tiger·tec Gold increases thermal and abrasive resistance, improving wear life and stability under continuous cutting, which supports longer runtimes and consistent part quality when using this Walter Tools insert. For which milling tasks is the parallelogram geometry suitable? The parallelogram 85° shape is particularly advantageous in axial milling and light shoulder operations, offering stable cutting engagement and good accessibility for machining contours. How does the F56 chipbreaker affect chip control? The F56 chipbreaker produces short, manageable chips in both steel and cast iron, reducing the risk of entanglement and easing evacuation, which contributes to smoother production cycles. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Mention of brand names such as Walter Tools serves explanatory purposes only; there is no affiliation implied. The offered item is an original, factory‑new product of the manufacturer.
ADMT10T320R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP35S grade for predictable wear behaviour and broad material coverage; the insert’s parallelogram geometry and chipbreaker F56 support stable cutting and efficient chip control. Order the insert directly via Metav Werkzeuge or ask the technical team for application-specific advice. ADMT10T320R-F56 WKP35S milling insert – Tiger·tec Silver, for steel and cast iron (Walter Tools) ADMT10T320R-F56 WKP35S is a precision milling indexable insert designed for productive machining of steels and cast irons, combining a coated carbide grade with an 85° parallelogram geometry for reliable material removal. Tiger·tec Silver coating for extended tool life WKP35S grade optimised for steel and cast iron Parallelogram 85° geometry for stable cuts Corner radius 2 mm for consistent edge strength Increased process reliability through advanced coating and grade The combination of the Tiger·tec Silver coating and the WKP35S grade provides a stable wear pattern and improved resistance to abrasive loading during continuous milling. As a coated carbide solution, the insert offers a controlled interaction with common workpiece materials, which helps to reduce unpredictable flank wear and maintain consistent cutting forces. This results in fewer regrinds, longer tool life and a more reliable production rhythm when machining steel and cast iron. Geometry and edge preparation for consistent surface quality The Parallelogram 85° form, together with the chipbreaker F56 and the 15° relief angle, promotes secure seating in the cutter body and effective chip formation for a wide range of cutting parameters. The corner radius 2 mm balances edge strength and surface finish, while the T3 plate thickness supports rigidity under radial loads. These design choices reduce chatter and help to deliver repeatable dimensional accuracy and a favourable surface condition with every pass. Practical integration and application guidance for production settings Specified for machining groups P and K (steel and cast iron), the insert is suitable for catalogue-dependent applications where a versatile, wear-resistant grade is required. The ADMT10T320R-F56 insert is intended for use in standard milling cutter bodies accepting parallelogram inserts with chipbreaker F56; its properties make it a sound choice where a mix of productivity and tool life is sought. If supplementary cutting data or tailored feeds and speeds are required, Metav Werkzeuge offers technical consultation to align cutting strategies with production targets — contact via info@metav-werkzeuge.com or +49 2822 7131930. Contact Metav Werkzeuge for a machining review to match Walter Tools Tiger·tec Silver inserts to specific production needs or to request application-specific cutting data Technical Data Article number: ADMT10T320R-F56-WKP35S-WALTER SKU: ADMT10T320R-F56-WKP35S-WALTER Product type: Milling insert Brand: Walter Tools Series: Tiger·tec Silver Grade: WKP35S Facts Plate size: 10 Corner radius: 2 mm Relief angle: 15° Plate thickness: T3 Tolerance class: M Special features Parallelogram 85° geometry Chipbreaker F56 Coated carbide (Tiger·tec Silver) Material suitability: P (steel) and K (cast iron) Designation: ADMT10T320R-F56 WKP35S FAQ Is this insert suitable for stainless steel applications? The insert is specified for steel and cast iron (P and K groups); stainless steel capability is not listed for the ADMT10T320R-F56 WKP35S and should be validated with Metav Werkzeuge for specific stainless grades. What are the main advantages of the Tiger·tec Silver coating? The Tiger·tec Silver coating on the WKP35S grade improves wear resistance and heat management, leading to extended tool life and stable cutting behaviour when machining steels and cast irons. Which geometry features support chip control in this insert? The Parallelogram 85° shape combined with chipbreaker F56 and a 15° relief angle promotes predictable chip formation and secure seating in compatible cutter bodies. Can this insert be used in high-feed or heavy-duty roughing operations? The insert’s corner radius 2 mm and robust WKP35S grade suit many productive roughing tasks; however, specific feed and depth parameters should be confirmed against the intended cutter body and machine capability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT10T320R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of a high-performance coated grade and purpose-designed geometry for reliable machining of heat-prone materials; the combination of the Tiger·tec Gold coating and the robust WSM35G grade delivers extended tool life and consistent chip control for stainless steels and superalloys — order directly via Metav Werkzeuge or request technical advice from our consultants. ADMT10T320R-F56 WSM35G Fräswendeschneidplatte by Walter Tools — Parallelogram 85° for stainless steels and superalloys The ADMT10T320R-F56 WSM35G is a parallelogram 85° indexable milling insert designed for heavy-duty and heat-prone machining, offering a coated carbide grade optimised for secure chip formation and stable cutting edges. Tiger·tec Gold coating technology Optimised for stainless steels and superalloys Parallelogram 85° form for versatile orientation 15° clearance and 2 mm corner radius Robust grade for demanding materials and longer tool life The WSM35G grade, part of the Tiger·tec Gold series, is a coated carbide solution formulated for machining difficult-to-cut alloys. It supports secure chip formation and resists edge wear when cutting stainless steels and superalloys, both of which generate high temperatures and challenge cutting edges. The coating reduces diffusion and abrasion, which in turn improves the achievable tool life and lowers the frequency of index changes in serial production. For operators seeking consistent component quality, the result is fewer interruptions and a more predictable process window. Geometry and chip control for stable machining and surface quality With its Parallelogram 85° shape and dedicated chipbreaker F56, this insert promotes reliable chip evacuation and directional flexibility. The geometry combines a 15° clearance with a 2 mm corner radius, improving strength at the cutting edge and enabling better surface finish on interrupted or continuous cuts. These features reduce the risk of built-up edge on heat-resistant materials and help maintain dimensional accuracy in multi-pass operations. The net effect is higher first-pass yield and reduced rework in demanding milling tasks. Shop-floor benefits: integration, repeatability and process security The insert is supplied in a T3 thickness and tolerance class M, suitable for standard clamping systems and ensuring repeatable seating and indexing. Its nominal designation enables straightforward replacement planning and tool management. Because the grade is tailored for materials that conduct heat poorly, the ADMT10T320R-F56 WSM35G supports higher stability at elevated cutting temperatures and contributes to consistent cycle times. For production environments focused on throughput and component integrity, this option balances wear resistance with cost-effective performance. For precise machining of stainless steels and superalloys with the proven Tiger·tec Gold grade, request the Walter Tools ADMT10T320R-F56 WSM35G from Metav Werkzeuge for tailored advice and stock availability — contact Metav Werkzeuge for production-ready recommendations. Technical data SKU: ADMT10T320R-F56-WSM35G-WALTER Designation: ADMT10T320R-F56 WSM35G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSM35G Core technical data Shape: Parallelogram 85° Clearance angle: 15° Corner radius: 2 mm Thickness: T3 Insert size: 10 Chipbreaker: F56 Tolerance class: M Special features Coated carbide grade Tiger·tec Gold Suitable materials: Stainless steels (M), Superalloys/Titanium (S) Stable chip formation High wear resistance Optimised for heavy and heat-prone machining FAQ What materials is this insert best suited for? The ADMT10T320R-F56 WSM35G is designed primarily for stainless steels and heat-resistant superalloys, offering secure chip control and edge stability when machining these materials. How does the insert geometry affect machining performance? The Parallelogram 85° shape combined with chipbreaker F56, a 15° clearance and 2 mm corner radius supports directional flexibility, reliable chip evacuation and improved surface quality during milling. What production benefits can be expected from this grade? Using the WSM35G grade from the Tiger·tec Gold series typically leads to longer tool life, fewer index changes and greater process stability when machining demanding, heat-prone materials. Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are mentioned for explanation only and do not imply any association between our company and the named manufacturers. The offered article is an original, brand-new product from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
ADMT10T320R-F56 WSM35S WSM35S Wendeplatten - Walter Tools
Take advantage of the combination of high process security, targeted chip control and extended tool life for efficient machining of stainless steels and heat‑resistant alloys; order the insert via Metav Werkzeuge or consult our specialists for application advice. ADMT10T320R-F56 WSM35S — Fräswendeschneidplatte (Parallelogram 85°), Tiger‑tec Silver | Walter Tools The ADMT10T320R-F56 WSM35S is a robust indexable milling insert designed for demanding machining of stainless steels and heat‑resistant superalloys, optimised for stable cutting performance in high‑temperature applications Tiger·tec Silver coated grade WSM35S Suitable for rostfreier Stahl and superalloys Parallelogram 85° insert form 2.0 mm corner radius for heavy cuts High reliability when machining stainless steels and superalloys The combination of the Tiger‑tec Silver coating and the WSM35S grade delivers a reliable cutting solution for materials that generate heat and resist chip flow. The coated carbide substrate is engineered to resist abrasion and thermal loading, which supports consistent edge life under intermittent and continuous cuts. When used in appropriate toolholders, the insert reduces the risk of built up edge and minimises rework, helping to maintain steady production output and predictable process windows. Stable chip control and secure edge geometry for productivity The integrated chipbreaker F56 and the parallelogram 85° geometry ensure controlled chip formation even in sticky or ductile materials. A corner radius of 2 mm increases mechanical strength at the cutting edge, allowing higher axial depths of cut and improved vibration damping. These features translate into fewer tool changes and longer uninterrupted cycles, resulting in measurable gains in machining throughput and lower unit costs over time. Practical benefits for workshop integration and tool management As an indexable insert, this design simplifies tool inventory and replacement procedures while providing flexibility across different cutter bodies. The plate thickness and tolerance class support secure clamping and repeatable positioning, which reduces setup time and supports consistent surface finish quality. Backed by Walter Tools' reputation for precision, the insert is suited to production environments that prioritise process stability and reproducible results. For tailored application advice or availability of Walter Tools Tiger‑tec Silver inserts such as ADMT10T320R‑F56 WSM35S, contact Metav Werkzeuge to discuss suitability for specific production requirements and next steps Technical data SKU: ADMT10T320R-F56-WSM35S-WALTER Article: ADMT10T320R-F56 WSM35S Product type: Fräswendeschneidplatte Series: Tiger-tec Silver Manufacturer: Walter Tools Facts Corner radius: 2 mm Relief angle: 15° Plate size: 10 Plate thickness: T3 Tolerance class: M Special features Grade/coating: WSM35S / Tiger‑tec Silver Chipbreaker: F56 Plate form: Parallelogram 85° Material compatibility: stainless steels (M), heat‑resistant superalloys and titanium (S) Intended use: heavy‑duty and high‑temperature machining FAQ What materials is this insert suitable for? The ADMT10T320R‑F56 WSM35S is designed for rostfreie Stähle (stainless steels) and heat‑resistant superalloys and titanium, using the WSM35S grade for improved heat resistance and stable cutting. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating on this Walter Tools insert enhances thermal resistance and wear behaviour, which prolongs edge life and maintains consistent cutting performance under elevated temperatures. Can the insert handle heavy depth of cut and interrupted cuts? Yes, the 2 mm corner radius and parallelogram geometry increase mechanical robustness, making the insert suitable for heavier axial depths and interrupted cutting where edge stability is critical. Is this insert compatible with standard cutter bodies? The insert form and dimensions (ADMT10T320R‑F56) conform to common indexable milling interfaces; compatibility should be verified with the specific cutter body and clamping system. What are the expected benefits in production environments? Using this insert typically results in improved process security, reduced frequency of tool changes and better surface quality consistency, which together support higher productivity and lower scrap rates. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
ADMT10T320R-F56 WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of the combination of a WSM45X coated-carbide grade and a robust F56 chipbreaker for secure chip control and extended cutting-edge stability when machining stainless steels and heat‑resistant alloys. Order this insert via Metav Werkzeuge or consult our advisors for the optimal grade and cutting data. ADMT10T320R-F56 WSM45X indexable milling insert — 15° free angle, F56 chipbreaker | Walter Tools The ADMT10T320R-F56 WSM45X is an indexable milling insert designed for heavy-duty and demanding machining of stainless steels and superalloys, offering stable cutting performance and reliable chip control in interrupted and continuous milling operations. Walter coated carbide grade WSM45X Optimised chip control with F56 breaker 15° free cutting angle for stable cutting Parallelogram 85° form for robust engagement Increased process reliability through a heat‑resistant grade The combination of the WSM45X coated‑carbide grade and its geometry is aimed at securing a stable cutting edge when facing the thermal and mechanical challenges of stainless steels and heat‑resistant superalloys. The coating and substrate composition support wear resistance and edge integrity, which reduces the frequency of index changes and contributes to more consistent part quality. For manufacturers prioritising uptime, this results in fewer tool interventions and more predictable cycle times. Predictable chip formation and easier post‑processing The integrated F56 chipbreaker is engineered to deliver compact, controllable chips under typical cutting conditions for the specified material groups, minimising the likelihood of chip entanglement and rework. Combined with the 15° free angle, this geometry helps to manage cutting forces and surface finish, making post‑machining operations such as polishing or surface treatment more efficient. The net effect is a reduction in secondary operations and improved component cleanliness. Robust engagement and application flexibility The parallelogram 85° insert form with a 2 mm corner radius and T3 thickness provides a stable seat in the toolholder and robust edge support for heavier depth‑of‑cut applications. These dimensional characteristics ensure a reliable contact pattern and load distribution, which is especially beneficial in milling strategies with variable feed or interrupted cuts. The insert’s designation signals suitability for both groups M and S according to ISO 513 — that is, stainless steels and heat‑resistant superalloys/titanium — enabling a single grade to cover a broad range of challenging workpiece materials. Practical advantages for workshop productivity Using a standardised insert form such as this reduces inventory complexity and simplifies tool changeover. The ADMT10T320R‑F56 geometry supports stable chip evacuation and consistent edge life, which together lower the total cost of machining through reduced downtime and scrap. For production environments where repeatability and surface integrity matter, this insert offers a balance of wear resistance and mechanical stability that supports reliable part output. Contact Metav Werkzeuge for tailored cutting‑data recommendations and to secure this Walter Tools insert for demanding stainless and superalloy machining tasks Technical Data Article number: ADMT10T320R-F56-WSM45X-WALTER Facts Free angle: 15° Corner radius: 2 mm Size: 10 Thickness: T3 Special features Coating / grade: WSM45X (coated carbide) Chipbreaker: F56 Form: Parallelogram 85° Series: Walter Schneidstoffsorte - Serie offen Tolerance class: M Material suitability: stainless steels (M), heat‑resistant superalloys / titanium (S) FAQ What materials is this insert suited for? The ADMT10T320R‑F56 WSM45X insert is designed for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), with the WSM45X grade optimised for those applications. How does the F56 chipbreaker affect machining? The F56 chipbreaker produces compact chips and supports stable evacuation under typical cutting parameters, improving surface quality and reducing the risk of chip re‑entanglement when using the ADMT10T320R‑F56 insert. Is the 2 mm corner radius suitable for roughing? Yes, the 2 mm corner radius provides greater edge strength and is well suited to heavier cuts, offering improved resistance to mechanical edge failure during roughing passes with this Walter Tools insert. Can this insert be used in interrupted cuts? The parallelogram 85° form and the robust grade WSM45X give the insert good stability for interrupted milling, maintaining cutting‑edge integrity under impact and varying engagement conditions. What benefits does the 15° free angle provide? The 15° free angle contributes to controlled cutting forces and helps mitigate the build‑up of heat on the cutting edge, supporting longer, more consistent tool life with the ADMT10T320R‑F56 insert. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are used solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, factory‑new goods of the manufacturer Walter Tools.
ADMT10T320R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of a combination of Tiger·tec Gold wear resistance, precise parallelogram 85° geometry and a 2 mm corner radius for consistent, productive milling of steels, stainless steels and heat‑resistant alloys; order directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. ADMT10T320R-F56 WSP45G milling insert — Walter Tools, Tiger·tec Gold, F56 chipbreaker ADMT10T320R-F56 WSP45G is a PVD‑coated carbide milling insert designed for versatile face and shoulder milling in demanding materials Tiger·tec Gold PVD coating Suitable for steel, stainless steel, superalloys Parallelogram 85° insert shape 15° relief angle and 2 mm corner radius Consistent productivity through advanced wear protection The Tiger·tec Gold coating on this insert offers a balanced combination of hardness and toughness. As a PVD‑coated carbide grade, it supports stable cutting-edge performance under elevated temperatures typical of milling operations in steel and rostfreiem Stahl. This translates into extended tool life and fewer insert changes, leading to measurable reductions in downtime and more predictable machining cycles. The result is an efficient production flow with lower process variability. Geometry engineered for secure chip control and surface quality A parallelogram 85° outline combined with the F56 chipbreaker creates controlled chip formation and evacuation during interrupted cuts. The insert’s 15° relief reduces rubbing on the flank while the 2 mm corner radius provides a compromise between strength and accessible finish quality. These geometric choices enable secure, repeatable engagement with the workpiece, improving surface integrity and reducing the likelihood of built‑up edge under mixed cutting conditions. Broad material capability with application guidance This insert is optimised for groups P, M and S: general steel, stainless steel and heat‑resistant superalloys/titanium. The material classification reflects suitability for typical milling challenges — from continuous roughing to mixed finishing passes. For machinists seeking a single grade to cover a range of components, the WSP45G sort delivers balanced behaviour: resistance to thermal degradation for high heat loads and sufficient toughness to withstand edge loading during interrupted cuts. Practical benefits for toolroom and production environments The ADMT10T320R‑F56 WSP45G insert reduces the need for multiple specialised grades by combining robustness and wear resistance in one product family. The combination of a reliable chipbreaker, Tiger·tec Gold surface engineering and an M tolerance class supports straightforward insert indexing and predictable tool life. This eases tool planning, simplifies inventory and contributes to stable cycle times — particularly valuable in batch production and tool‑controlled setups. For technical procurement or application advice on Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — the Metav team provides material‑specific recommendations and availability. Technical data SKU: ADMT10T320R-F56-WSP45G-WALTER Article designation: ADMT10T320R-F56 WSP45G Series: Tiger‑tec Gold Grade/sort: WSP45G Chipbreaker: F56 Facts Insert size: 10 Insert thickness: T3 Shape: Parallelogram 85° Relief angle: 15° Corner radius: 2 mm Tolerance class: M Special features Coating type: PVD (Tiger·tec Gold) Substrate: coated carbide Applicable material groups: P / M / S Execution: T FAQ What materials are best machined with this insert? The ADMT10T320R‑F56 WSP45G insert is suitable for steel, stainless steel and heat‑resistant superalloys/titanium (material groups P, M, S), offering balanced wear resistance and edge stability for these groups. What is the purpose of the F56 chipbreaker? The F56 chipbreaker is designed for controlled chip formation during milling, improving evacuation and reducing the risk of re‑cutting, which helps maintain surface finish and tool life for the ADMT10T320R‑F56 WSP45G. How does the 2 mm corner radius affect performance? A 2 mm corner radius increases cutting edge strength and improves tool life under intermittent loading while still permitting acceptable surface finish in shoulder and face milling operations. Is this insert compatible with standard milling cutters for parallelogram inserts? Yes, the parallelogram 85° form and M tolerance class make the insert compatible with toolholders designed for ADMT‑style parallelogram inserts; verify seat geometry and clamping type before assembly. What advantages does Tiger·tec Gold provide in milling? Tiger·tec Gold PVD coating enhances thermal resistance and reduces abrasive wear, resulting in more consistent tool life and reliable performance across a range of steels and heat‑resistant materials. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
ADMT10T325R-F56 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WKP35G grade for reliable machining of steel and cast iron; the 15° relief and 2.5 mm corner radius deliver stable chip formation and consistent surface quality. Order the ADMT10T325R-F56 WKP35G directly via Metav Werkzeuge or consult our technical advisors for application-specific selection. ADMT10T325R-F56 WKP35G — Parallelogram indexable milling insert, Tiger‑tec Gold (Walter Tools) The ADMT10T325R-F56 WKP35G is a parallelogram milling insert engineered for productive machining of steel and cast iron, combining a coated carbide grade with an optimised chipformer for steady performance. Tiger‑tec Gold coating for long tool life Optimised F56 chipformer for consistent chips Parallelogram 85° geometry for cutting stability 2.5 mm corner radius for reinforced cutting edge Robust grade and coating for extended tool life The insert is built on the WKP35G cutting grade within the Tiger‑tec Gold series, a coated cemented carbide solution designed to resist abrasive wear common in steel and cast iron machining. This coating improves high‑temperature performance and adhesion resistance, which translates into longer intervals between index changes and lower tooling costs per component. The grade’s balance of toughness and hardness supports reliable edge life even under varied process conditions. Geometry that stabilises cutting and surface quality The parallelogram 85° platform together with a 15° relief reduces shock at the cutting edge and evens out radial force distribution, resulting in calmer cutting behaviour and improved finish on the workpiece. The 2.5 mm radius increases edge strength, helping to avoid premature chipping when entering interrupted cuts or working with tougher steel grades. These design elements contribute to predictable tool performance and steady productivity on serial and batch jobs. Chip control and predictable process security Equipped with the F56 chipformer and a T3 plate thickness, the insert is tailored for consistent chip breaking and evacuation when machining P (steel) and K (cast iron) materials. Stable chip formation minimises recutting, protects the insert edge and reduces downtime for cleaning or tool changes. The tolerance class M ensures dimensional consistency between inserts, supporting reproducible results across tool assemblies and enabling efficient tool setting and spindle balancing. Application benefits and integration into production Specified for use in productive milling operations, this insert supports high process reliability and broad material coverage, making it suitable for mixed production environments. The combination of grade, chipformer and geometry aims to reduce cycle time and increase parts-per-index rates. Further technical data can be provided for cutting parameters and clamping recommendations; contact options are available for application matching and optimisation. Contact Metav Werkzeuge for tailored application advice and procurement of original Walter Tools Tiger‑tec Gold inserts to maximise machining performance in steel and cast iron operations Technical data Article number: ADMT10T325R-F56-WKP35G-WALTER Product: Indexable milling insert Designation: ADMT10T325R-F56 WKP35G Manufacturer: Walter Tools Facts Size: 10 mm Corner radius: 2.5 mm Relief angle: 15° Thickness: T3 Geometry: Parallelogram 85° Tolerance class: M Special features Grade: WKP35G (coated cemented carbide) Series: Tiger‑tec Gold Chipformer: F56 Material groups: P (steel), K (cast iron) Stable chip formation and wide material coverage FAQ What materials is this insert suitable for? The ADMT10T325R-F56 WKP35G is optimised for machining steel (P) and cast iron (K) according to the grade and series characteristics. How does the Tiger‑tec Gold coating affect performance? The Tiger‑tec Gold coating on the WKP35G grade increases wear resistance and thermal stability, extending index life and improving process reliability during demanding milling tasks. What benefit does the parallelogram 85° geometry provide? Parallelogram 85° geometry stabilises cutting forces and supports better surface finish while allowing secure clamping in many milling cutter pockets. Is the F56 chipformer suitable for mixed cutting conditions? Yes, the F56 chipformer is designed for consistent chip control across a range of steel and cast‑iron applications, reducing recutting and downtime. What does tolerance class M mean for production? Tolerance class M indicates consistent dimensional conformity between inserts, aiding reproducible tool setup and predictable machining results. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; no connection between our company and the named brands is implied. The offered article is original and brand new from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT10T325R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Benefit from a combination of extended tool life and high process reliability thanks to the Tiger‑tec Gold coating and the WSM35G grade; the robust chip control and 15° clearance support stable machining of demanding materials. Order this milling insert directly via Metav Werkzeuge or consult our specialists for application support. ADMT10T325R-F56 WSM35G milling indexable insert — Tiger‑tec Gold, for stainless steel and heat‑resistant superalloys — Walter Tools The ADMT10T325R-F56 WSM35G is a parallelogram 85° milling insert engineered for heavy‑duty machining of stainless steels and heat‑resistant superalloys, offering a 15° clearance and a 2.5 mm corner radius to improve edge stability and chip formation. Tiger‑tec Gold coating for extended tool life Designed for stainless steel and superalloys Parallelogram 85° geometry for secure clamping 2.5 mm corner radius with 15° clearance High‑performance grade for demanding materials The WSM35G grade from Walter Tools is a coated carbide alloy within the Tiger‑tec Gold family, developed for machining difficult‑to‑cut materials. It targets ISO 513 groups M and S, meaning it is suitable for stainless steels and heat‑resistant superalloys/titanium, where toughness, build‑up edge and heat generation challenge conventional grades. The combination of grade and coating translates into longer tool life and more consistent machining cycles, reducing downtime and improving overall cost efficiency. Geometry and chip control for consistent surface quality This insert’s Parallelogram 85° geometry and integrated chipbreaker F56 promote reliable chip formation and evacuation under diverse cutting conditions. The 2.5 mm corner radius and 15° clearance contribute to edge strength and reduced risk of chipping, while the T3 thickness and tolerance class M ensure repeatable seating and secure clamping in compatible toolholders. Together these features support stable cutting forces, which in turn help achieve uniform surface finish and minimise rework. Process security that supports productive machining By combining a robust substrate with the Tiger‑tec Gold coating, the insert provides enhanced resistance to abrasion and thermal load. This results in improved process security and predictable wear behaviour, especially in continuous production environments where repeatability is essential. The stable cutting edge characteristic of this solution helps maintain part tolerances and reduces the frequency of insert changes, thereby supporting higher productivity and lower unit costs. Application notes and recommended uses This indexable insert is intended for machining of M (stainless steels) and S (heat‑resistant superalloys and titanium) according to ISO classifications; depending on the cutting geometry, the grade performs particularly well on stainless materials. Typical application windows include moderate to heavy removal rates where chip control and edge stability are priorities. For optimal results, match the insert geometry and the F56 chipbreaker to the chosen cutting parameters and the workpiece material, and consider coolant strategy to manage temperatures when machining superalloys. For reliable, high‑performance milling of stainless steels and superalloys, specify the Tiger‑tec Gold ADMT10T325R-F56 WSM35G from Walter Tools and contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: ADMT10T325R-F56-WSM35G-WALTER Product: Fräswendeschneidplatte (milling indexable insert) Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WSM35G Designation: ADMT10T325R-F56 Core specifications Corner radius: 2.5 mm Clearance angle: 15° Geometry: Parallelogram 85° Insert size: 10 Thickness: T3 Tolerance class: M Features / Applicability Chipbreaker: F56 Coating/technology: Tiger‑tec Gold Substrate: coated carbide Material application: S / M (heat‑resistant superalloys/titanium; stainless steels) Suitable for demanding machining where stable chip formation is required FAQ What materials is this insert designed for? The ADMT10T325R‑F56 WSM35G insert is designed for ISO groups M and S, making it suitable for stainless steels and heat‑resistant superalloys/titanium when used with the appropriate geometry and cutting data. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on the WSM35G grade increases wear resistance and thermal stability, which helps extend tool life and improve process security in continuous milling operations. What role does the F56 chipbreaker play? The chipbreaker F56 supports controlled chip formation and evacuation, reducing the risk of entanglement and promoting consistent surface quality when machining challenging materials. Is the 2.5 mm corner radius suitable for finishing? A 2.5 mm corner radius provides increased edge strength for robust cutting and is best employed where a balance between edge durability and surface finish is required; for fine finishing, smaller radii may be considered depending on the application. What tolerance and seating accuracy can be expected? The insert is supplied with tolerance class M and T3 thickness, ensuring repeatable seating and reliable clamping in compatible toolholders for consistent machining results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected product names are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered item is original factory‑new goods of the manufacturer.
ADMT10T325R-F56 WSM35S T Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating, the F56 chipformer and a robust 2.5 mm corner radius ensures reliable performance when machining demanding materials; choose this insert for consistent chip control and longer tool life. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. ADMT10T325R-F56 WSM35S indexable milling insert – Tiger·tec Silver, 15° relief, Walter Tools The ADMT10T325R-F56 WSM35S is a parallelogram indexable milling insert engineered for productive machining of stainless steels and heat‑resistant superalloys, offering precise edge stability and controlled chip formation. Tiger·tec Silver heat resistance Optimised F56 chipformer for stable chips Parallelogram 85° geometry for axial rigidity 2.5 mm corner radius for robust edge life Durable coating for extended cutting performance The Tiger·tec Silver coating applied to the WSM35S grade delivers improved wear resistance and thermal stability under elevated cutting temperatures. For stainless steels and similar tough-to-cut alloys, the coating reduces flank wear and supports a predictable tool life, which translates into fewer indexings and reduced downtime. This feature-oriented design provides a tangible gain in process reliability without complex parameter changes. Geometry and chip control that boost machining rates The insert’s parallelogram 85° geometry combines a secure cutting engagement with controlled axial forces, while the engineered chipformer F56 promotes short, consistent chips across varying depths of cut. The geometry reduces vibration and supports higher feed rates where machine and clamping allow. Explaining the chipformer: it is a small groove and ramp design on the rake face that shapes swarf for easier evacuation and safer handling in automated production. Tailored for difficult materials and thermal challenges Designed for ISO groups M and S, the grade is optimised for stainless steels, superalloys and titanium, materials that commonly generate heat and sticky swarf. The insert’s substrate and coating combination supports a stable cutting edge and helps prevent built-up edge formation, improving surface finish and dimensional repeatability. Choosing this grade mitigates common problems when machining high-alloy parts, such as accelerated wear from heat concentration. Robust dimensions and tolerance for industrial use With a corner radius of 2.5 mm, a 15° relief angle and a T3 thickness, this insert provides mechanical strength for interrupted cuts and shoulder milling. The tolerance class M signifies manufacturing precision that aids consistent clamping and repeatable toolpaths in multi-station setups. These measurable attributes support process planning: the insert’s form and size make it suitable for stable, productive production flows in batch and continuous operations. Trust Walter Tools’ Tiger·tec Silver technology for demanding applications — contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored machining recommendations and order support Technical data Article number: ADMT10T325R-F56-WSM35S-WALTER Designation: ADMT10T325R-F56 WSM35S Manufacturer: Walter Tools Facts Size: 10 Corner radius: 2.5 mm Relief angle: 15° Thickness: T3 Form: Parallelogram 85° Special features Grade: WSM35S (coated carbide, Tiger·tec Silver) Chipformer: F56 Tolerance class: M Suitable for: stainless steels (M), superalloys / titanium (S) FAQ What materials is this insert intended for? The ADMT10T325R-F56 WSM35S insert is intended for machining stainless steels and heat‑resistant superalloys and titanium, as indicated by its S / M suitability and coating technology. How does the Tiger·tec Silver coating benefit production? Tiger·tec Silver improves thermal resistance and wear behaviour; in the ADMT10T325R-F56 WSM35S this supports longer tool life and more consistent surface quality when cutting demanding alloys. What role does the F56 chipformer play? The F56 chipformer shapes and breaks chips to promote safe evacuation and reduce entanglement, which helps maintain stable cutting conditions in the ADMT10T325R-F56 WSM35S. Is the insert suitable for interrupted cuts and shoulder milling? Yes, the 2.5 mm corner radius and T3 thickness offer mechanical robustness suitable for interrupted cuts and shoulder milling operations with appropriate tooling and clamping. Which tolerance and repeatability class applies? The insert is manufactured to tolerance class M, ensuring consistent seating and repeatable performance in fixture and toolholder systems. Walter Tools is a brand of Walter AG and part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. The item offered is original, brand‑new stock from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
ADMT10T325R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the versatile WSP45G grade and the F56 chipbreaker for reliable chip control and long tool life; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. ADMT10T325R-F56 WSP45G — Milling insert (Parallelogram 85°, Tiger·tec Gold) by Walter Tools The ADMT10T325R-F56 WSP45G is an indexable milling insert engineered for versatile face and shoulder milling across steel, stainless steel and heat-resistant superalloys. Tiger·tec Gold PVD coating for long tool life Suitable for steel, stainless and superalloys Parallelogram shape, 85° cutting edge Stable chip control with F56 chipbreaker Durable coating and grade for extended tool life The combination of the Tiger·tec Gold coating and the WSP45G grade provides a PVD-coated cemented carbide configuration that improves wear resistance and supports a stable cutting edge under demanding conditions. The surface technology reduces abrasive and adhesive wear, which translates into longer service intervals and fewer insert changes. For production environments where tool longevity directly affects throughput, this configuration supports consistent cycle times and reduces unexpected downtime. Geometry and chip control that improve process reliability The ADMT10T325R-F56 WSP45G benefits from a parallelogram 85° geometry and a dedicated F56 chipbreaker, which together promote controlled chip formation and effective evacuation. The 2.5 mm corner radius increases edge strength for interrupted cuts while the 15° relief angle balances cutting action and edge support. These geometric decisions reduce the risk of edge chipping and enable stable cutting conditions, which is especially valuable when shifting between roughing and semi-finishing passes. One insert for multiple materials reduces stock complexity Designed for the material groups P / M / S, the grade is optimised for unalloyed and alloyed steel, stainless steel and challenging superalloys/titanium that generate high temperatures and require robust edge performance. Using a single insert family across these material classes simplifies inventory, speeds up tooling decisions and reduces the need for frequent tool changes when jobs vary across work orders. The result is a leaner tooling setup with predictable outcomes. Practical features for production planning and quality consistency With tolerance class M and thickness code T3, the insert delivers predictable dimensional repeatability and straightforward replacement routines. The clearly defined chipbreaker and consistent coating quality aid process stabilisation, making it easier to set and maintain cutting parameters. For workshop managers and process engineers this means fewer trial cycles, faster ramp-up times for new jobs and a reliable path to repeatable surface finish and dimensional accuracy. Contact Metav Werkzeuge today for tailored tool selection and application advice on Walter Tools ADMT10T325R-F56 WSP45G milling inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance Technical data SKU: ADMT10T325R-F56-WSP45G-WALTER Label: Fräswendeschneidplatte ADMT10T325R-F56 WSP45G Walter Tools Product type: Fräswendeschneidplatte (milling insert) Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSP45G Execution: T ISO designation: ADMT10T325R-F56 WSP45G Numbers / Core technical data Size: 10 mm Corner radius: 2.5 mm Relief angle: 15° Thickness code: T3 Tolerance class: M Designs / Special features Chipbreaker: F56 Shape: Parallelogram 85° Coating: Tiger·tec Gold (PVD) Applicable materials: Steel (P), stainless steel (M), superalloys/titanium (S) FAQ Is this insert suitable for stainless steel applications? Yes. The WSP45G grade and Tiger·tec Gold coating are specifically formulated to handle the heat and toughness associated with stainless steel, making the ADMT10T325R-F56 WSP45G well suited for such tasks. What corner radius and relief angle does the insert have? The insert features a 2.5 mm corner radius and a 15° relief angle, values that support edge strength and controlled cutting behaviour for roughing and semi-finishing operations. Which chipbreaker is integrated and what benefit does it provide? The integrated F56 chipbreaker promotes stable chip formation and reliable evacuation, improving process security and reducing the likelihood of chip-related interruptions with the ADMT10T325R-F56 WSP45G. Can the same insert be used for titanium and nickel-based alloys? Yes. The P/M/S designation indicates suitability for steel, stainless steel and heat-resistant superalloys/titanium, so the insert is applicable to titanium and nickel-based materials within appropriate cutting parameter windows. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Walter Tools (Walter AG) is a leading manufacturer of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are cited solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product from the manufacturer.
ADMT10T330R-F56 WKP35G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating, the WKP35G grade and the F56 chipbreaker ensures reliable chip control and extended tool life; order the ADMT10T330R-F56 WKP35G milling insert directly via Metav Werkzeuge or consult our specialists for application advice. ADMT10T330R-F56 WKP35G milling indexable insert — Tiger·tec Gold, for steel and cast iron (Walter Tools) The ADMT10T330R-F56 WKP35G is a precision milling indexable insert designed for productive machining of steel and cast iron, combining a Tiger·tec Gold coating with a dedicated chipbreaker geometry for stable cutting performance. Tiger·tec Gold coated carbide Suitable for steel and cast iron Parallelogram 85° geometry 15° relief angle and 3 mm corner radius Consistent chip control for reliable machining results The combination of the F56 chipbreaker and the WKP35G grade produces a predictable chip form, reducing interruptions and increasing process reliability. The Tiger·tec Gold coated carbide provides thermal and abrasive resistance, which helps to maintain cutting edge geometry over longer tool life; in practice this translates into fewer tool changes and higher uptime on production lines. For those less familiar, a chipbreaker shapes and breaks the metal swarf so that evacuation is easier and the surface finish remains consistent. Geometry and angles that support accurate milling The 85° parallelogram geometry together with a 15° relief angle and a 3 mm corner radius offers a balanced mix of strength and accessibility. The parallelogram form provides a favourable cutting direction for a wide range of face and shoulder milling operations, while the 3 mm radius supports stable engagement in interrupted cuts. These design choices minimise vibration and distribute cutting forces, which benefits dimensional accuracy and surface quality on workpieces made from steel and cast iron. Practical benefits for workshop and production planning Specifically optimised for P/K applications, this insert reduces process variability and streamlines tool selection across mixed production runs. The coated grade and geometry enable predictable wear behaviour, simplifying replacement intervals and inventory planning. Where cycle time and repeatability are priorities, the insert’s construction supports higher productivity without compromising component quality, making it a rational choice for engineering teams seeking cost-effective machining solutions. Contact Metav Werkzeuge for tailored application advice, cutting data recommendations and supply options — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: ADMT10T330R-F56-WKP35G-WALTER Designation: ADMT10T330R-F56 WKP35G Series: Tiger-tec Gold Manufacturer: Walter Tools Product type: Fräswendeschneidplatte (milling indexable insert) Numbers / Core Technical Data Relief angle: 15° Corner radius: 3 mm Plate size: 10 Plate thickness: T3 Plate form: Parallelogram 85° Chipbreaker: F56 Tolerance class: M Designs / Special Features Grade: WKP35G (coated carbide) Material suitability: P / K (steel and cast iron) Series description: Tiger·tec Gold technology Main application: machining of steel and cast iron Stable chip formation and broad material coverage FAQ What materials is this insert suitable for? The ADMT10T330R-F56 WKP35G insert (Walter Tools milling indexable insert) is suitable for steel and cast iron applications, indicated by the P/K material suitability. How does the Tiger·tec Gold coating benefit performance? The Tiger·tec Gold coating on the WKP35G grade increases thermal and abrasive resistance, which improves edge stability and extends tool life for demanding milling operations. Which geometry suits interrupted cuts and shoulder milling? The 85° parallelogram geometry combined with a 3 mm corner radius and 15° relief angle offers strength and rigidity that help manage interrupted cuts and deliver consistent shoulder milling results. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original factory-new goods of the manufacturer.
ADMT10T330R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger‑tec Silver cutting grade, stable chip control and robust parallelogram 85° geometry to maintain steady production rates and predictable tool life; order directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. ADMT10T330R-F56 WKP35S — Milling Insert, Tiger‑tec Silver, for Steel and Cast Iron (Walter Tools) A ADMT10T330R-F56 WKP35S milling insert engineered for productive machining of steel and cast iron in mixed production environments Tiger‑tec Silver coating technology Suitable for steel and cast iron machining Parallelogram 85° insert geometry 3 mm corner radius for stable cutting Higher throughput thanks to a wear‑resistant cutting grade The combination of the Tiger‑tec Silver series and the WKP35S grade delivers a wear‑resistant, coated cemented‑carbide solution that is optimised for the thermal and mechanical stresses encountered when machining steel and cast iron. The coating and substrate pairing is designed to slow abrasive wear and maintain a stable cutting edge, which results in extended tool life and more predictable reconditioning intervals. In production terms, this means fewer tool changes and a steadier machining cycle time when compared with uncoated or less advanced grades. Geometry that supports rigidity and versatile toolpaths The parallelogram 85° geometry together with the 15° relief angle and a 3 mm corner radius offers a balance between accessibility and cutting edge strength. The insert form provides favourable entry and exit behaviour on radial approaches while the corner radius reduces the risk of chipping on light interruptions and moderate radial engagements. This geometry is useful for both finishing passes where surface integrity is important and for productive roughing passes where edge stability is required. Chip control and material group suitability explained Equipped with the F56 chipbreaker, the insert is tuned to produce short, consistent chips in many turning and milling conditions, aiding evacuation and reducing the risk of recutting. The designation follows the ISO material group concept: P indicates suitability for steels and K for cast irons, as defined in ISO 513. In practice this means the insert is engineered for the typical heat generation and chip formation of steels and the abrasive, often brittle behaviour of cast parts, supporting a wide range of component materials without frequent grade swaps. Predictable performance for industrial production Designed as a medium‑tolerance option (tolerance class M) and produced in the T3 thickness family, this insert provides reproducible seating and repeatable pocket indexing. The balance of grade, chipbreaker and geometry supports consistent surface finish and dimensional stability across runs, which contributes directly to reduced scrap rates and improved overall equipment effectiveness (OEE). Integration into established Walter Tools tool systems is straightforward, and the insert’s specifications facilitate easy replacement and inventory handling in workshop settings. For application advice or to reserve ADMT10T330R-F56 WKP35S inserts from Walter Tools, contact Metav Werkzeuge GmbH — technical consultants are available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: ADMT10T330R-F56-WKP35S-WALTER Manufacturer: Walter Tools Product type: Milling insert Designation: ADMT10T330R-F56 WKP35S Facts Relief angle: 15° Corner radius: 3 mm Insert size: 10 Plate thickness: T3 Geometry: Parallelogram 85° Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WKP35S (coated cemented carbide) Chipbreaker: F56 Material suitability: P / K (steel, cast iron) Execution: T FAQ What materials can this insert machine effectively? The ADMT10T330R-F56 WKP35S insert from Walter Tools is suitable for steel (P) and cast iron (K) applications as indicated by its grade and chipbreaker configuration. How does the F56 chipbreaker affect machining? The F56 chipbreaker on this Walter Tools insert promotes short, controlled chip formation, improving evacuation and reducing the chance of recutting during medium to high metal removal rates. Which insert geometry is this and what advantage does it give? The parallelogram 85° geometry with a 15° relief angle enhances cutting stability and access on complex toolpaths while the 3 mm corner radius increases edge robustness for mixed finishing and roughing operations. Is this insert suitable for production environments with mixed materials? Yes — the combination of Tiger‑tec Silver coating and the WKP35S grade provides wear resistance and consistent edge life across steel and cast iron batches, making it well suited to mixed‑material production. What tolerance and thickness can be expected for repeatability? This insert is supplied in tolerance class M and the T3 thickness family, ensuring reproducible seating and consistent indexing in modular milling toolheads. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected designations are used solely for explanation. There is no affiliation between our company and the mentioned brands. The offered article is original, factory‑new merchandise of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com