CNMG160612-MU5 WPP10G WPP10G Wendeplatten - Walter Tools
The combination of a Tiger·tec Gold coating and the WPP10G grade delivers durable wear resistance and consistent chip formation, supporting higher productivity in steel turning. The MU5 chipbreaker and rhombic 80° geometry ensure controlled chips and stable cutting, making this insert a cost-effective choice for series production; order or request advice via Metav Werkzeuge for tailored recommendations. CNMG160612-MU5 WPP10G — Indexable turning insert with Tiger·tec Gold, MU5 chipbreaker — Walter Tools The CNMG160612-MU5 WPP10G is an indexable turning insert designed for ISO P steel applications, combining Tiger·tec Gold technology with a MU5 chipbreaker for reliable chip control in general turning operations. Tiger·tec Gold coated grade WPP10G MU5 chipbreaker for reliable chip control Rhombic 80° geometry, negative 0° rake 1.2 mm corner radius for stable cutting Higher productivity through wear-resistant coating and grade optimisation The combination of the Tiger·tec Gold coating and the WPP10G grade provides enhanced wear resistance and thermal stability for turning operations in steel (ISO P). These properties translate into longer tool life and fewer index changes in batch production, which reduces downtime and increases machine utilisation. The coated carbide construction is optimised for the heat and chip behaviour typical of steel machining, offering a predictable reduction in flank wear under recommended cutting conditions. This performance-oriented setup supports cost-efficiency and repeatable component quality in demanding production environments. Precision geometry that improves chip control and surface quality The MU5 chipbreaker, applied to a Rhombic 80° shape with a negative 0° rake, is designed to form short, controllable chips and maintain a steady cutting action. The insert’s 1.2 mm corner radius increases edge robustness, improving stability during interrupted cuts and providing reliable dimensional results. The CNMG160612-MU5 WPP10G indexable insert thus balances edge strength and finishing capability, enabling operators to select conservative feeds for fine surface finish or higher feeds for productive semi-finishing with reduced chatter risk. Compatibility with standard CNMG toolholders simplifies integration into existing tool systems. Process security and practical advantages for workshop integration With a tolerance class of M and a series design focused on consistent performance, the insert supports process security across multiple shift operations. The robust geometry and grade combination contribute to repeatable results and fewer unexpected reworks, which stabilises production planning. Stock management benefits from the insert’s versatility across many steel grades, reducing variant complexity in tool cabinets. Where hardened planning and repeat accuracy are priorities, this insert offers dependable behaviour during series runs, helping to maintain throughput and improve overall machining reliability. Contact Metav Werkzeuge for application-specific cutting data and availability — Metav Werkzeuge can advise on optimal insert selection, cutting parameters and delivery options to suit production needs. info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: CNMG160612-MU5-WPP10G-WALTER Name: Drehwendeschneidplatte CNMG160612-MU5 WPP10G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP10G Core technical data Inscribed circle / size: 16 mm Corner radius: 1.2 mm Thickness code: 06 Relief angle: 0° (negative) Geometry angle: 80° Special features Coating / technology: Tiger·tec Gold Chipbreaker: MU5 Grade type: coated carbide Application group: Steel (ISO P) Tolerance class: M Plate form: Rhombic 80° FAQ What materials is this insert suitable for? The insert is intended for machining steel (ISO P); the WPP10G grade and Tiger·tec Gold coating are optimised for the heat and chip characteristics of unalloyed and alloyed steels. How does the MU5 chipbreaker affect machining? The MU5 chipbreaker produces short, controlled chips and improves chip evacuation and surface consistency when using the CNMG160612-MU5 WPP10G insert, especially in general turning operations. Can this insert be used for both finishing and semi-finishing? Yes. The 1.2 mm corner radius and robust grade balance edge strength and finish potential, allowing for conservative finishing feeds or more productive semi-finishing cuts with maintained stability. What does the negative 0° rake mean in practice? A negative 0° rake increases edge strength and is beneficial for applications with interrupted cuts or heavier engagement; it contributes to durability under challenging cutting conditions for this insert. How can the part be identified in stock and ordering systems? The article is listed as CNMG160612-MU5-WPP10G-WALTER and referenced as a CNMG160612-MU5 indexable insert in Walter Tools’ Tiger·tec Gold range. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected brand names and trademarks are the property of their respective owners and are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands beyond the sale of original, factory-new goods from the manufacturer.
CNMG160612-MU5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a universal WPP20G grade and the MU5 chipbreaker for consistent productivity and dependable chip control; order directly via Metav Werkzeuge or consult the technical team for tailored cutting data. CNMG160612-MU5 WPP20G – Rhombic 80° turning insert, Tiger‑tec Gold (Walter Tools) CNMG160612-MU5 WPP20G is a rhombic 80° indexable insert engineered for productive steel machining with a coated Tiger‑tec Gold carbide grade Tiger‑tec Gold coating for high wear resistance WPP20G grade optimised for steel machining MU5 chipbreaker for reliable chip control Rhombic 80° geometry with 1.2 mm corner radius Maximise tool life and process reliability with modern coating technology The combination of Tiger‑tec Gold coating and the WPP20G grade produces a coated carbide system tailored to the thermal and mechanical demands of steel cutting. This results in improved wear resistance and stable cutting edges under cyclic loads. For production-focused workshops, the enhanced edge life translates into fewer indexings and more consistent component quality. The cutting material classification targets ISO P materials, ensuring predictable performance when machining a broad range of steels. Consistent chip control and surface quality for steady throughput The integrated MU5 chipbreaker is designed for controlled chip formation in steel applications, reducing the risk of chip accumulation and downtime. Combined with a 0° relief geometry (negative rake), the insert balances cutting forces and edge strength to support repeatable surface finishes. The 1.2 mm corner radius increases robustness at the cutting edge, helping to withstand interrupted cuts and maintain dimensional accuracy without compromising the workpiece surface. Geometry and handling that boost productivity on the lathe The rhombic 80° shape and CNMG-style designation provide versatile cutting angles suited to a wide range of turning tasks, from profile work to medium finishing operations. The insert's standard thickness code and format enable secure clamping in common turning toolholders, facilitating quick indexable changes and minimal setup time. For job shops and series production alike, this indexable insert supports a predictable production flow and easier process standardisation across similar turning applications. Contact Metav Werkzeuge for application-specific cutting data and to discuss the CNMG160612-MU5 WPP20G insert for steel machining; technical consultation and tailored recommendations are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: CNMG160612-MU5-WPP20G-WALTER Product type: Drehwendeschneidplatte (turning insert) Designation: CNMG160612-MU5 WPP20G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP20G Facts Corner radius: 1.2 mm Geometry: Rhombus 80° Relief angle: 0° (negative) Size: 16 Thickness code: 06 Tolerance class: M Special features Chipbreaker: MU5 Material application: Steel (ISO P) Coating technology: Tiger‑tec Gold Substrate: Coated cemented carbide FAQ Which materials is this insert designed for? The CNMG160612-MU5 WPP20G insert is intended for machining steel (ISO P); the WPP20G grade and Tiger‑tec Gold coating are optimised for the thermal and chip formation characteristics of steels. What does the MU5 chipbreaker achieve? The MU5 chipbreaker promotes controlled chip formation and evacuation when turning steel, supporting reliable chip control and reduced risk of chip-related interruptions. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius increases edge strength and resistance to wear, which is beneficial for interrupted cuts and helps to maintain dimensional stability during longer tool life. Is the insert suitable for finishing operations? With a 0° negative relief and the robust WPP20G grade, the insert offers a compromise between edge strength and finish capability, making it suitable for medium finishing on steels when cutting parameters are adjusted accordingly. Which series does this insert belong to and what does that mean? This item is part of the Tiger‑tec Gold series; the series combines advanced coating technology with balanced substrate properties for consistent tool life and broad application coverage in steel machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original factory-new product from the manufacturer (Walter Tools).
CNMG160612-MU5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, a proven WSM20S grade and the MU5 chipbreaker for reliable machining of rostfreier Stahl and heat‑resistant alloys; order the inserts directly via Metav Werkzeuge or consult our specialists for process recommendations. CNMG160612-MU5 WSM20S indexable turning insert — rhombic 80°, 1.2 mm corner radius (Walter Tools) The CNMG160612-MU5 WSM20S is an indexable turning insert engineered for secure machining of rostfreier Stahl and high‑temperature alloys, offering high edge stability through the Tiger‑tec Silver coating. Tiger‑tec Silver coating for heat resistance Optimised MU5 chipbreaker for stable chips Rhombic 80° form with 1.2 mm corner radius Reliable thermal stability for tough materials The Tiger‑tec Silver coating paired with the WSM20S carbide grade gives the insert a marked advantage when tackling materials that generate heat and strain the cutting edge. For machining rostfreier Stahl and Superalloys, the coating reduces adhesion and supports a consistent cutting edge, which translates into extended tool life and fewer index changes. The result is a more predictable process with reduced scrap rates and higher uptime, making the insert a rational choice where process stability and component quality are priorities. Geometry engineered for strength and repeatability The rhombic 80° profile and a 1.2 mm corner radius deliver a balance between robustness and finishing capability. The negative rake angle of 0° increases resistance to edge chipping under interrupted or heavy cuts, while the CNMG format ensures secure clamping and repeatable seating in standard toolholders. Together these features maintain dimensional accuracy during longer cycles and simplify tool management in production environments where consistency and repeatability matter. Efficient chip control and reduced machining costs The MU5 chipbreaker is optimised for controlled chip formation across ISO M and S workpiece groups. Stable chips reduce recutting and improve surface integrity, enabling higher cutting parameters and shorter cycle times without sacrificing component finish. This efficiency contributes to lower unit costs over batch runs and supports leaner production by minimising tool changes and secondary operations. Easy adoption into existing workflows Available in the common CNMG size, this insert integrates seamlessly with standard tool bodies and changeover procedures. The clear grade designation and series (Tiger‑tec Silver, WSM20S) aid rapid tooling decisions and minimise setup time. Whether used for roughing heavy sections or finishing demanding rostfreier Stahl parts, the insert provides a straightforward upgrade path for workshops seeking improved process security with minimal retraining. Contact Metav Werkzeuge for application support and to secure Walter Tools Tiger‑tec Silver CNMG inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific rostfreier Stahl or superalloy jobs Technical data Article number: CNMG160612-MU5-WSM20S-WALTER Manufacturer: Walter Tools Product type: Indexable turning insert Grade / sort: WSM20S Series: Tiger‑tec Silver Core specifications Insert size: 16 Thickness designation: 06 Corner radius: 1.2 mm Rake angle: 0° (negative) Insert shape: Rhombic 80° Tolerance class: M Design and special features Chipbreaker: MU5 Coating: Tiger‑tec Silver (coated carbide) Material suitability: S / M (heat‑resistant superalloys and rostfreier Stahl) Application focus: Heavy cutting and demanding rostfreier Stahl operations Basic designation: CNMG160612-MU5 FAQ What materials is this insert designed for? The CNMG160612-MU5 WSM20S insert is formulated for machining rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), where edge stability and thermal resistance are critical. How does the MU5 chipbreaker benefit production? The MU5 chipbreaker promotes stable chip formation and reduced recutting, helping to shorten cycle times and improve surface quality when using the CNMG insert. Is the negative 0° rake suitable for tough turning operations? Yes, the negative 0° rake increases edge robustness for interrupted and heavy cuts, making the insert appropriate for demanding turning tasks. Can this insert be used for finishing as well as roughing? With its 1.2 mm corner radius and Tiger‑tec Silver coating, the insert is suitable for both roughing and medium finishing, depending on holder setup and cutting parameters. How is the CNMG format advantageous for workshop use? The CNMG format ensures secure clamping, straightforward indexing and broad compatibility with standard toolholders, which simplifies tool management in production settings. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG160612-NRS WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of reliable chip control, a robust Tiger·tec Silver coating and a geometry optimised for stainless steel machining to keep production stable and economical. Order the inserts directly via Metav Werkzeuge or consult our specialists for application advice. CNMG160612-NRS WMP20S – Turning indexable insert for stainless steel, Tiger·tec Silver by Walter Tools A CNMG160612-NRS WMP20S turning insert engineered for dependable performance in medium to robust stainless steel turning operations Tiger·tec Silver coated carbide grade Optimised for stainless steel machining Rhombic 80° insert with 1.2 mm radius Negative 0° clearance geometry High-performance turning for stainless steels The CNMG160612-NRS WMP20S is built around a coated carbide grade from the Tiger·tec Silver family, designed to tackle the peculiarities of stainless steel: toughness, work-hardening and thermal sensitivity. The coated substrate supports a stable cutting edge under increased heat generation, which reduces the risk of built-up edge and extends tool life. By combining a robust grade with a dedicated chipformer, the insert delivers consistent material removal rates and contributes to predictable cycle times in serial production. Improved chip control and edge security for reliable productivity A focus on chip control underpins this insert’s design: the NRS chipbreaker shapes chips to avoid entanglement and to support uninterrupted turning. The 1.2 mm corner radius and rhombic 80° form give a secure edge for moderate to heavier cuts, improving surface finish without sacrificing edge strength. The negative 0° clearance geometry provides a firmer orientation in the tool holder, beneficial when facing intermittent cuts or tougher stainless grades. These characteristics together reduce rework and machine idle time, making the tooling choice an efficiency decision. Practical integration and application advantages With the standard CNMG form factor and a nominal size indicator 16, the insert fits common indexable turning toolholders, enabling straightforward integration into existing tool sets. The WMP20S grade is oriented towards stainless steels and supports medium to robust cutting regimes, which simplifies grade selection across similar job types. For process planners, the result is a versatile insert that balances edge life and cutting performance, helping to lower tooling-related downtime while maintaining repeatable part quality. Contact Metav Werkzeuge today for tailored advice on Walter Tools CNMG160612-NRS WMP20S inserts and immediate availability Technical data Article number: CNMG160612-NRS-WMP20S-WALTER Name: CNMG160612-NRS WMP20S Product type: Turning indexable insert Brand: Walter Tools Series: Tiger·tec Silver Facts Inscribed circle / size: 16 mm Corner radius: 1.2 mm Relief angle: 0° (negative) Thickness code: 06 Special features Coating / grade: Tiger·tec Silver, WMP20S Chipformer: NRS Insert form: Rhombus 80° Execution: G Suitable material group: stainless steel Typical application: medium to robust stainless steel turning FAQ What materials is this insert best suited for? The CNMG160612-NRS WMP20S insert from Walter Tools is intended primarily for stainless steel machining, where chip control and edge security are critical. How does the WMP20S grade improve performance? WMP20S is a coated carbide grade within the Tiger·tec Silver family; it enhances cutting-edge stability and wear resistance, supporting longer tool life in demanding stainless-steel operations. What benefit does the NRS chipbreaker provide? The NRS chipformer on this insert produces controlled chip shapes that reduce entangling and help avoid built-up edge when turning stainless steels with appropriate cutting parameters. Which toolholders are compatible with this insert form? This CNMG-shaped insert (rhombic 80°) with size 16 fits standard CNMG-compatible indexable turning holders designed for negative-geometry inserts Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanation only and do not imply any connection between our company and the named brands. The offered item is original, brand-new merchandise from the manufacturer.
CNMG160612-NRS WSM10 WSM10 Wendeplatten - Walter Tools
Take advantage of the combination of a coated carbide WSM10 grade, a robust NRS chipbreaker and a rhombic 80° form for reliable machining of stainless steels and heat‑resistant alloys; order directly via Metav Werkzeuge or consult the team for application advice. CNMG160612-NRS WSM10 turning insert – Rhombic 80°, for stainless steel and superalloys | Walter Tools A CNMG160612-NRS WSM10 turning insert designed for secure cutting edges when machining stainless steels and heat‑resistant superalloys in demanding turning operations Coated carbide grade WSM10 for tough materials Rhombic 80° geometry for versatile turning 0° negative rake for secure edge strength 1.2 mm corner radius for robust surface finish Consistent performance on stainless steels and superalloys The WSM10 grade is a coated carbide specifically developed to handle the thermal and mechanical challenges of stainless steels and high‑temperature alloys. Its coating and carbide substrate promote stable chip formation, reduce tendency to built‑up edge and contribute to longer tool life under elevated cutting temperatures. For process engineers and production planners, this translates into fewer tool changes and more predictable cycle times during serial production. Geometry that protects the cutting edge and improves finish The rhombic 80° insert shape combined with a 0° negative rake provides an inherently strong cutting edge suitable for heavier cuts and intermittent engagement. The NRS chipbreaker supports controlled chip flow, reducing the risk of entanglement and enabling consistent surface quality. A 1.2 mm corner radius balances edge robustness with achievable surface finish, making the insert suitable for both profile turning and general finishing tasks where reproducibility matters. Application range and measurable process benefits Marked for material groups S / M, this insert is particularly suited to workpieces that generate high heat and demand stable edge retention. The grade supports reliable machining of nickel‑based alloys, titanium and many classes of stainless steels, reducing scrap rates and contributing to higher first‑pass yields. In practice, the combination of grade and geometry boosts process reliability and helps maintain consistent results across shifts and machine platforms. Integration into production and handling considerations The CNMG form fits standard CNMG toolholders, allowing straightforward integration into existing tool‑holding systems without special adaptors. The insert’s negative relief and chipbreaker selection simplify parameter optimisation for roughing and semi‑finishing cycles. For procurement and shopfloor planners, the WSM10 series offers a balance between edge life and surface integrity, supporting more productive machining sequences and predictable tool management. Contact Metav Werkzeuge today for tailored recommendations on Walter Tools CNMG160612-NRS WSM10 turning inserts, application parameters and holder compatibility Technical Data SKU: CNMG160612-NRS-WSM10-WALTER Designation: CNMG160612-NRS WSM10 Product type: Turning insert Series: Walter Schneidstoffsorte - Serie offen Facts Insert size: 16 Thickness: 06 Corner radius: 1.2 mm Relief angle: 0° (negative) Geometry: Rhombic 80° Special features Grade: WSM10 (coated carbide) Chipbreaker: NRS Suitable for: stainless steels Material groups: S / M FAQ What materials is this insert intended for? The CNMG160612-NRS WSM10 turning insert from Walter Tools is intended for stainless steels and heat‑resistant superalloys, designated by the material groups S and M. How does the WSM10 grade benefit machining of difficult alloys? WSM10 is a coated carbide grade that supports stable chip formation and edge retention when machining nickel‑based alloys and titanium; the CNMG160612-NRS WSM10 insert therefore offers improved process reliability. What is the effect of the 1.2 mm corner radius? A 1.2 mm corner radius on the CNMG160612-NRS WSM10 provides enhanced edge strength and a better resistance to chipping, resulting in more consistent surface finishes under heavy or interrupted cuts. Which chipbreaker is fitted and what advantage does it offer? The insert features an NRS chipbreaker, which promotes controlled chip flow and reduces the risk of chip entanglement, helping to preserve tool life and surface quality. Is the insert compatible with standard holders? The CNMG form fits standard CNMG toolholders, allowing direct replacement without special adapters for most turning tool systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (marketed as Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners and are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
CNMG160612-NRS WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM10S grade for reliable performance in demanding stainless and high-temperature alloy turning; the rhombic 80° geometry and NRS chipformer ensure controlled chips and consistent surface quality. Order directly via Metav Werkzeuge or consult the technical team for application support. CNMG160612-NRS WSM10S turning insert for stainless steels and superalloys — Walter Tools CNMG160612-NRS WSM10S is a high-performance rhombic 80° turning insert designed for heavy-duty turning of stainless steels and heat-resistant superalloys. Tiger·tec Silver coating for heat resistance and wear control NRS chipformer for stable chip control under heavy cuts Suited to stainless steels and superalloys Consistent cutting when machining stainless steels and superalloys The CNMG160612-NRS WSM10S insert combines a thermally robust Tiger·tec Silver coating with a wear-resistant grade to address the typical challenges of machining stainless steels and superalloys. These materials tend to work-harden and create heat at the cutting edge; the coating reduces friction and thermal loading, which helps maintain a stable cutting edge and reduces the risk of built-up edge. The result is fewer interruptions, improved process stability and a more consistent surface finish during extended productions. Geometry and chip control that protect the tool and the workpiece The rhombic 80° form and the NRS chipformer are engineered to keep chips compact and predictable during interrupted or heavy cuts. A 1.2 mm corner radius offers a favourable compromise between edge strength and achievable surface quality, while the 0° negative rake supports robust engagement in tougher materials. These geometric choices translate into reliable chip evacuation, reduced chatter and clearer expectations for tool life—particularly in applications with variable depths of cut. Coating and grade engineered for productive turning The WSM10S grade within the Tiger·tec Silver family emphasises heat resistance and edge stability for challenging alloys. The coated cemented carbide substrate supports higher cutting temperatures and promotes stable wear behaviour, which means longer intervals between index changes and fewer tool-related stoppages. For production environments seeking reproducible results in demanding materials, this combination contributes to enhanced uptime and predictable performance. Contact Metav Werkzeuge for application advice and specification support on Walter Tools Tiger·tec Silver WSM10S inserts and receive tailored recommendations for fixture and cutting-parameter pairing Technical data Article number: CNMG160612-NRS-WSM10S-WALTER Product type: turning insert Brand: Walter Tools Series: Tiger-tec Silver Grade: WSM10S Core specifications Insert form: Rhombic 80° Size: 16 (designation) Thickness: 06 (designation) Corner radius: 1.2 mm Free angle: 0° (negative) Tolerance class: M Materials and special features Coating: Tiger·tec Silver Chipformer: NRS Suitability: stainless steels (M), superalloys/titanium (S) Recommended use: heavy-duty and difficult-to-machine alloys Series characteristics: wear-resistant, heat-tolerant cutting grade Brand claim: high process reliability and consistent results with secure chip control FAQ Is this insert suitable for turning stainless steels? Yes. The WSM10S grade and Tiger·tec Silver coating are specified for stainless steels, providing improved edge stability and heat resistance for demanding stainless-steel turning applications. Can the insert be used on superalloys and titanium alloys? Yes. The insert’s material suitability includes superalloys (group S), and the grade is designed to handle the poor heat conduction and high strain rates typical of these materials. What role does the NRS chipformer play? The NRS chipformer shapes and breaks chips to ensure safe evacuation and reduced risk of chip entanglement, which supports uninterrupted machining and protects both tool and workpiece. How does the rhombic 80° geometry affect tool behaviour? An 80° rhombic geometry balances approach angle and edge strength, enabling robust cutting under heavy engagement while delivering acceptable surface finishes on interrupted cuts. Which features contribute most to tool life in this insert? The combination of the Tiger·tec Silver coating and the WSM10S grade enhances thermal resistance and wear behaviour, which together extend edge life and reduce unplanned index changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for clarification only. There is no affiliation between our company and the named manufacturers; the offered item is an original, factory-new product of the manufacturer.
CNMG160612-NRS WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of high process security, specialised coating technology and reliable chip control for consistent performance in demanding turning operations; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CNMG160612-NRS WSM20S indexable turning insert — Rhombic 80°, negative rake 0° (Walter Tools) A CNMG160612-NRS WSM20S indexable turning insert engineered for heavy-duty machining of stainless steels and heat-resistant superalloys, offering the proven Tiger·tec Silver coating for enhanced edge stability and consistent chip formation Tiger·tec Silver coating technology Suitable for stainless steels and superalloys Rhombic 80° geometry, negative 0° rake NRS chipbreaker for stable chip control Efficient cutting in demanding materials with proven coating benefits The coated carbide grade WSM20S, part of the Tiger·tec Silver family, is designed to keep cutting edges stable when machining tough, heat-prone materials. As an indexable insert, the component prioritises repeatable performance and predictable wear behaviour, which reduces unexpected downtime. The combination of a specialised coating and a robust substrate results in improved resistance to built-up edge and thermal loading, yielding fewer tool changes and more consistent component tolerances. Geometry that supports secure clamping and accurate facing The rhombic 80° shape and negative rake 0° configuration provide a stable cutting interface for axial and radial forces common in heavy turning. This geometry enhances indexable insert rigidity, allowing machines to sustain higher feed and depth-of-cut settings where appropriate. The resulting benefit is a more economical cycle time with reliable dimensional control, particularly in repetitive production runs and batch machining of corrosion-resistant parts. Controlled chip formation for safer, predictable machining Integrated NRS chipbreaking ensures segmented chips and reduces the risk of long, entangling swarf when machining ductile or gummy alloys. Coupled with the corner radius 1.2 mm, the insert supports a balance between durable cutting edge strength and surface finish quality. Optimised chip control mitigates workpiece contamination and keeps toolholders and machine spindles operating within safe thermal and mechanical limits, contributing to stable process windows. Application range and practical advantages at the workshop level This insert is specified for material groups M and S according to ISO 513, namely stainless steel and heat-resistant superalloys/titanium. That targeted suitability makes the insert a sound choice for aerospace components, power-generation parts and medical device housings where material behaviour demands heat-resistant coatings and stable edge life. The insert format and standard clamping interfaces also support fast index changes, reducing non-productive time and simplifying inventory management across production lines. Contact Metav Werkzeuge for tailored application advice on the Walter Tools CNMG160612-NRS WSM20S indexable turning insert and ensure the chosen geometry and grade match the machining task perfectly Technical data Article number: CNMG160612-NRS-WSM20S-WALTER Product label: Drehwendeschneidplatte CNMG160612-NRS WSM20S Walter Tools Product type: indexable turning insert Brand: Walter Tools Series: Tiger-tec Silver Grade: WSM20S Designation: CNMG160612-NRS WSM20S Execution: G Tolerance class: M Chipbreaker: NRS Relief angle: 0° (negative) Shape: Rhombus 80° Numbers / Core technical data Corner radius: 1.2 mm Inscribed circle / size: 16 mm Thickness: 06 Designs / Special features Coating: Tiger·tec Silver (coated carbide) Material groups: S / M (superalloys/titanium and stainless steel) Typical applications: heavy-duty turning, difficult-to-machine alloys Geometry: rhombic 80° with negative rake FAQ What materials is this insert suitable for? The CNMG160612-NRS WSM20S insert from Walter Tools is specified for ISO groups M and S, making it suitable for stainless steel and heat-resistant superalloys or titanium alloys in demanding turning operations. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the WSM20S grade increases thermal resistance and edge stability, which helps to reduce built-up edge and prolong service life during the machining of heat-prone materials. What advantages does the NRS chipbreaker provide? The NRS chipbreaker offers reliable chip segmentation and evacuation, improving safety and productivity by preventing long swarf and maintaining a clean cutting zone when using the CNMG160612-NRS WSM20S insert. Is the corner radius suitable for finishing operations? With a corner radius of 1.2 mm, the insert provides a compromise between edge strength and surface finish; it is appropriate for many semi-finish and finish turning tasks where edge robustness is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Registered trademarks and trade names are the property of their respective owners. Brand names and trademarks are used for explanation only and do not imply any affiliation between Metav Werkzeuge and the mentioned manufacturers. The offered item is an original, brand-new product from the respective manufacturer.
CNMG160612-NRS WSM30S WSM30S Wendeplatten - Walter Tools
With a combination of Tiger·tec Silver coating and the WSM30S grade, this insert offers enhanced thermal resistance and stable edge life in the machining of demanding alloys; its rhombic 80° form with a 1.2 mm corner radius supports consistent chip control and predictable tool performance. Order the insert directly via Metav Werkzeuge or contact the consultants for application-specific advice. CNMG160612-NRS WSM30S indexable turning insert — Tiger·tec Silver, for rostfreier Stahl and superalloys (Walter Tools) A CNMG160612-NRS WSM30S is a negative-geometry, rhombic 80° indexable turning insert optimised for machining rostfreier Stahl and heat-resistant superalloys; designed for secure chip formation and high thermal load resistance. Tiger·tec Silver coating for high thermal resistance Suitable for rostfreier Stahl and superalloys Rhombic 80° form with 1.2 mm corner radius Negative 0° geometry for stable cutting High thermal stability for demanding materials The WSM30S grade, combined with the Tiger·tec Silver coating, is engineered to cope with the heat and adhesion tendencies of rostfreier Stahl and nickel‑based superalloys. The coating enhances oxidation resistance at elevated temperatures and reduces flank wear, which leads to more predictable cutting edge stability and longer tool life. For production environments where thermal load and built-up edge are common, this combination provides a rational improvement in process stability and reduces unscheduled tool changes. Reliable chip control and surface quality Built around a chipbreaker NRS and a rhombic 80° geometry, the insert generates controlled chip forms that ease evacuation in turning operations and contribute to a consistent surface finish. The 1.2 mm corner radius balances edge robustness with acceptable surface roughness, making the tool suitable for roughing-to-finishing transitions. Clear, measurable benefits include fewer interrupted cuts and reduced machining variability, which supports higher first‑pass yields and more efficient cycle times. Geometry and handling for process security The negative 0° relief angle provides stable cutting forces and is particularly beneficial on heavy interrupted cuts and hard workpiece zones. The CNMG160612-NRS format allows easy seating in standard toolholders while offering a robust cutting edge profile. Tolerance class M ensures consistent seating and repeatability, aiding in quick re‑indexing and minimising setup times — a direct advantage for batch production and mixed‑lot manufacturing. Practical suitability and application scope This insert is specified for materials in ISO groups M (rostfreie Stähle) and S (heat‑resistant superalloys and titanium), reflecting a wide application range in aerospace, energy and medical component machining. The product series emphasises stable chip formation and reliable edge life under demanding conditions. When integrating into existing tool systems, compatibility with common clamping systems and standard CNMG seatings simplifies adoption and reduces adaptation effort. Contact Metav Werkzeuge for tailored application advice, availability and specification sheets for Walter Tools CNMG160612-NRS WSM30S — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss requirements and delivery options Technical data SKU: CNMG160612-NRS-WSM30S-WALTER Article designation: CNMG160612-NRS WSM30S Product type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger-tec Silver Core data Inscribed circle / size: 16 Corner radius: 1.2 mm Thickness: 06 Geometry: Rhombic 80° Relief angle: 0° (negative) Grade: WSM30S Chipbreaker: NRS Tolerance class: M Design & special features Coating technology: Tiger·tec Silver Material suitability: rostfreier Stahl (ISO M) Material suitability: Superalloys / Titanium (ISO S) Application focus: Heavy duty machining, high thermal load Series characteristics: Stable chip formation, improved tool life FAQ What materials is the CNMG160612-NRS WSM30S suitable for? The CNMG160612-NRS WSM30S (Walter Tools turning insert) is designed for rostfreier Stahl (ISO M) and heat‑resistant superalloys and titanium (ISO S), offering thermal resistance and stable chip control. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the WSM30S grade reduces oxidation and flank wear at elevated temperatures, which improves cutting edge life and process reliability during long and thermally demanding cuts. What is the advantage of the negative 0° geometry? Negative 0° relief provides robust cutting edge support and reduced vibration in heavy or interrupted cuts, contributing to consistent performance with the CNMG160612-NRS insert. Can this insert be used for finishing passes? Yes — with its 1.2 mm corner radius and controlled chip formation, the insert supports roughing and semi‑finishing; selecting suitable parameters will optimise surface quality and tool life. Which chipbreaker is fitted to this insert and why does it matter? The insert features the NRS chipbreaker, which promotes predictable chip shapes and evacuation, reducing the risk of entanglement and enhancing repeatability in production environments. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only; there is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product from the manufacturer.
CNMG160612-NRT WS10 Wendeplatten - Walter Tools
Take advantage of the combination of a WS10 coated carbide grade, proven NRT chipbreaker geometry and a robust Rhombus 80° shape to maintain machining stability and consistent productivity; order the inserts directly via Metav Werkzeuge or request application advice from our consultants. CNMG160612-NRT WS10 — indexable turning insert, Rhombus 80°, 1.2 mm corner radius | Walter Tools A CNMG160612-NRT WS10 indexable turning insert engineered for stable, productive turning operations in industrial metalworking. High-performance WS10 coated carbide Rhombus 80° geometry for stability Negative 0° clearance for heavy cuts NRT chipbreaker for reliable chip control Predictable performance from a dedicated grade The WS10 grade is a coated carbide solution developed for broad industrial use; its coating improves tool life and wear resistance compared with uncoated grades. By combining a dedicated substrate with a PVD/CVD-style surface treatment, the grade reduces flank wear and maintains cutting-edge integrity over longer machining cycles. For production planners this means fewer insert changes and more predictable process windows, which directly supports efficient cycle planning and reduced downtime. Geometry that supports higher feeds and repeatability The Rhombus 80° form and 1.2 mm corner radius deliver a balance between strength and finishing capability. The rhombic profile offers secure seat engagement and straightforward clearance management, while the larger corner radius increases edge strength for interrupted cuts and deeper engagement. The negative 0° clearance provides a robust cutting edge suitable for heavier feed rates and interrupted machining, reducing vibration and enhancing repeatability in volume production. Better chip control and consistent surfaces The NRT chipbreaker is designed to shape and evacuate chips reliably under variable cutting conditions, reducing rework caused by chip entanglement or poor evacuation. Controlled chip formation assists with thermal stability at the cutting edge, which in turn improves surface finish consistency and reduces the risk of built-up edge. Machinists and process engineers benefit from fewer quality deviations and more reproducible component tolerances when the chip flow is handled effectively. Integration into process planning and quality assurance With a tolerance class M and standard CNMG designation, the insert integrates easily into existing tool holders and indexable systems. Operators should verify material suitability against the official product matrix for WS10 to ensure optimal results; the grade is categorised as a coated carbide and its actual performance depends on workpiece material and cutting parameters. For workshops seeking process stability, the insert supports consistent results across batch runs and contributes to measurable productivity gains when applied within recommended cutting data. Consult Metav Werkzeuge for application guidance and order Walter Tools CNMG160612-NRT WS10 inserts via info@metav-werkzeuge.com or call +49 2822 7131930 to confirm the best grade and geometry for the intended application Technical data Article number: CNMG160612-NRT-WS10-WALTER Description: Indexable turning insert (drehwendeschneidplatte) ISO designation: CNMG160612-NRT WS10 Manufacturer: Walter Tools Numbers / Core technical data Inscribed circle / size: 16 Corner radius: 1.2 mm Thickness: 06 Free angle: 0° (negative) Tolerance class: M Chipbreaker: NRT Shape: Rhombus 80° Grade: WS10 Special features Coated carbide grade NRT chipbreaker for controlled chip formation Robust negative geometry for heavy engagement Walter open-series grade for broad application range Suitability to be checked against the product matrix for specific materials FAQ What materials is the CNMG160612-NRT WS10 best suited for? The CNMG160612-NRT WS10 is a coated carbide grade; material suitability should be confirmed against the Walter product matrix to match the grade to the actual workpiece material and hardness. How does the NRT chipbreaker affect machining? The NRT chipbreaker promotes short, controlled chips and reliable evacuation, which supports consistent surface finish and reduces the likelihood of chip-related interruptions. Can the insert handle interrupted cuts and heavy engagement? Yes — the negative 0° clearance combined with the 1.2 mm corner radius increases edge strength and makes the insert suitable for interrupted cuts and heavier engagements where stability is required. Is the CNMG160612-NRT WS10 compatible with standard CNMG tool holders? The CNMG ISO designation ensures compatibility with standard CNMG tool holders; the insert fits conventional indexable turning systems used across industrial turning operations. What tolerance and consistency can be expected from this insert? With tolerance class M and a robust geometry, the insert supports consistent machining results and repeatable part quality when used within recommended cutting parameters. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand presentation: Walter Tools) is part of the Sandvik Group and is recognised for precision tools and productive machining solutions. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered marks are mentioned for explanatory purposes only. There is no affiliation between our company and the trademark owners; the offered item is an original, factory-new product from the manufacturer.
CNMG160612-RM5 WMP20G RM5 Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating and the RM5 chipbreaker for secure chip control in stainless-steel turning; the rhombic 80° geometry with a 1.2 mm corner radius and 0° negative clearance provides robust edge strength and consistent surface quality — order the CNMG160612-RM5 WMP20G insert directly via Metav Werkzeuge or consult our advisors for application support. CNMG160612-RM5 WMP20G – Indexable turning insert for stainless steel, Walter Tools The CNMG160612-RM5 WMP20G is an indexable turning insert engineered for dependable performance when machining stainless steel under medium to robust conditions. Tiger·tec Gold coated carbide grade WMP20G Optimised RM5 chipbreaker for secure chips Rhombic 80° geometry for versatile turning 1.2 mm corner radius and 0° negative clearance Improved process reliability through advanced coating technology The Tiger·tec Gold coating combined with the WMP20G carbide grade is formulated to support stable cutting in challenging materials such as stainless steel. This coating technology reduces the tendency for built-up edge and helps maintain a sharp cutting zone over extended machining intervals. For production environments where consistent part quality and predictable tool life matter, the coated grade delivers thermal and mechanical resistance that translates into fewer tool changes and reduced process variations. The result is a measurable improvement in machining reliability and repeatability. Geometry and chip control that enhance productivity The insert’s rhombic 80° shape and RM5 chipbreaker are designed to balance versatility and secure chip formation. The 80° geometry offers flexible approach angles for a wide range of turning operations, while the RM5 chipbreaker promotes short, controllable chips when machining ductile stainless steels. The 1.2 mm corner radius provides edge strength for interrupted cuts and longer engagement, and the 0° negative clearance creates a stable cutting edge suitable for heavier cut depths. Together, these geometry features reduce vibration, support surface finish targets and help maintain cycle-time efficiency. Practical advantages on the shop floor and material compatibility The insert is positioned for applications in the ISO M group and is especially suited to rostfreiem Stahl (stainless steel) where heat and work-hardening tendencies are common. As a coated carbide insert with a clearly defined chip control strategy, it contributes to process security and lower scrap rates in serial production. The tool offers an effective compromise between robustness and finish quality, making it suitable for both roughing and mixed turning tasks where machine time and part consistency are critical. For specific cutting parameters and recommended feeds, Metav Werkzeuge can provide tailored advice to match machine power and workpiece conditions. For machining stainless steel with the Tiger·tec Gold grade, contact Metav Werkzeuge for application guidance or to secure the CNMG160612-RM5 WMP20G insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: CNMG160612-RM5-WMP20G-WALTER Article designation: CNMG160612-RM5 WMP20G Manufacturer: Walter Tools Series: Tiger-tec Gold Facts Insert size: 16 Thickness: 06 Corner radius: 1.2 mm Clearance angle: 0° (negative) Special features Grade: WMP20G (coated carbide) Chipbreaker: RM5 Geometry: Rhombic 80° Application group: stainless steel (ISO M) Designed for medium to robust machining conditions FAQ What materials is this insert suitable for? The CNMG160612-RM5 WMP20G indexable turning insert from Walter Tools is designed primarily for machining stainless steel (ISO M), supporting stable chip formation in these demanding materials. How does the RM5 chipbreaker affect chip control? The RM5 chipbreaker on this insert promotes short, controllable chips when turning ductile and work‑hardening stainless steels, improving process security and reducing the risk of entanglement. Can the insert be used for finishing operations? Yes, the combination of the rhombic 80° geometry and the 1.2 mm corner radius allows mixed use; the coated grade supports acceptable surface finishes while maintaining edge integrity during longer engagements. Is the geometry suitable for interrupted cuts? The 1.2 mm corner radius provides increased edge strength for interrupted cuts, offering greater resistance to edge chipping compared with finer radii. Which series and coating technology does the insert belong to? This product is part of the Tiger‑tec Gold series and uses the WMP20G coated carbide grade to improve thermal resistance and wear performance in stainless‑steel turning. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is an original, brand‑new product of the manufacturer.
CNMG160612-RM5 WMP20S RM5 Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Silver coating and a robust RM5 chipbreaker for consistent productivity when machining rostfreier Stahl; the geometry and negative rake ensure secure chip control and long tool life. Order inserts directly via Metav Werkzeuge or request application advice from the sales consultants. CNMG160612-RM5 WMP20S turning insert – Tiger·tec Silver, for rostfreier Stahl (Walter Tools) CNMG160612-RM5 WMP20S is a precision turning insert designed for reliable machining of rostfreier Stahl in medium to robust conditions Tiger·tec Silver coating for durable edge Optimised RM5 chipbreaker for secure chips Rhombic 80° form, 1.2 mm corner radius Negative 0° free rake for robust turning Consistent performance on rostfreier Stahl through specialised grade and coating The combination of the WMP20S grade with the Tiger·tec Silver coating provides a balance between wear resistance and thermal stability tailored to the demands of rostfreier Stahl. Coated carbide supports stable chip formation and reduces the tendency for built-up edge, which is typical when turning tough, heat-generating stainless workpieces. This engineered grade is aimed at operations requiring repeatable results under moderate to heavy cutting conditions, helping to maintain surface finish and dimensional control over longer tool life. Geometry optimised for chip control and process security The rhombic 80° plate form, together with the RM5 chipbreaker and a 1.2 mm corner radius, delivers predictable chip flow and strength at the cutting edge. The negative 0° free rake angle increases edge support and resistance to chipping when facing interrupted cuts or harder zones in workpieces. These geometry choices translate into fewer tool changes, reduced vibration sensitivity and stable cutting behaviour—advantages that directly affect cycle times and overall shop-floor throughput. Designed for productivity and repeatable results Tolerance class M and the solid construction ensure repeatable positioning and reliable clamping in standard toolholders. The coated grade is developed to offer a good compromise between wear resistance and edge toughness, extending effective tool life in serial production. Together, coating technology and robust geometry contribute to process reliability and predictable regrind intervals, supporting leaner tool management and improved uptime on the turning centre. Typical applications and practical machining guidance This insert is intended primarily for turning operations on rostfreier Stahl, especially where material toughness and heat generation demand a coating that controls adhesion and wear. The insert’s shape and chipbreaker suit medium to robust cutting parameters; adjustments to feed and coolant strategy can further enhance chip breaking and surface quality. For specific machining windows, holder selection and cutting data tailored to the workpiece and machine are recommended to maximise the grade’s potential and secure consistent production results. Contact Metav Werkzeuge for tailored machining recommendations or to source Walter Tools Tiger·tec Silver inserts best suited for rostfreier Stahl turning applications Technical data Article number: CNMG160612-RM5-WMP20S-WALTER Label: CNMG160612-RM5 WMP20S Walter Tools Product type: turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Core data Plate size: 16 Thickness code: 06 Corner radius: 1.2 mm Free rake angle: 0° (negative) Tolerance class: M Plate form: Rhombus 80° Special features Grade: WMP20S (coated carbide, Tiger·tec Silver) Chipbreaker: RM5 Material code: M Suitable for: rostfreier Stahl Execution: G ISO designation: CNMG160612-RM5 WMP20S UID: CNMG160612-RM5-WMP20S-WALTER FAQ What workpieces is this insert best suited for? This turning insert is optimised for machining rostfreier Stahl; the WMP20S grade and Tiger·tec Silver coating provide improved chip control and resistance to built-up edge when turning stainless components. How does the RM5 chipbreaker influence machining? The RM5 chipbreaker on the CNMG160612-RM5 WMP20S promotes reliable chip formation and evacuation, reducing the risk of entangling chips and supporting consistent surface quality in medium to robust turning operations. Is the geometry suitable for interrupted cuts? Yes, the negative 0° free rake and robust rhombic 80° form with a 1.2 mm corner radius give the insert enhanced edge support, making it more resistant to chipping during interrupted cuts. Can this insert be used for finishing as well as roughing? The CNMG geometry and the chosen corner radius favour strength and durability; with adjusted feeds and speeds the insert can be used for both medium finishing and roughing on rostfreier Stahl, depending on surface quality requirements. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered article is original, brand-new merchandise from the manufacturer (Walter Tools).
CNMG160612-RM5 WMP30G RM5 Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the RM5 chipbreaker offers reliable chip control and extended edge life in demanding operations; coupled with the 80° rhombic geometry and a 1.2 mm corner radius, this insert supports consistent machining of stainless steel. Order the CNMG160612-RM5 WMP30G directly via Metav Werkzeuge or request application advice from their consultants. CNMG160612-RM5 WMP30G turning insert – Tiger·tec Gold, RM5 chipbreaker (Walter Tools) The CNMG160612-RM5 WMP30G turning insert is designed for robust machining of stainless steel, delivering stable chip formation and long tool life in medium to heavy turning operations Tiger·tec Gold coating for improved wear resistance RM5 chipbreaker supports stable chip formation Rhombic 80° geometry for versatile turning 1.2 mm corner radius for durable cutting edge Predictable chip control reduces process variability The coated carbide grade WMP30G from the Tiger·tec Gold series combines a tailored coating with a substrate engineered for stainless steel. The RM5 chipbreaker promotes short, controllable chips under tougher cutting conditions, which reduces the risk of built-up edge and stabilises the cutting process. For production environments this translates into fewer interruptions, more consistent component quality and a measurable increase in overall process efficiency. Durable edge and geometry for repeatable results The 80° rhombic form with a 1.2 mm corner radius provides a robust cutting edge that tolerates intermittent cuts and higher feed rates common in medium to heavy turning. The insert’s negative 0° clearance angle supports secure seating in most standard toolholders, improving rigidity and repeatability. These design choices lead to longer tool life and predictable wear patterns, simplifying tool management and reducing the frequency of insert changes. Application fit and material guidance Selected for material group M (stainless steel), this insert is optimised for materials that tend to work-harden and produce adhesive chips. The coated carbide formulation promotes controlled heat management and stable chip formation, lowering the chance of edge build-up. When paired with appropriate cutting parameters and coolant strategy, the result is improved surface finish and reduced rework rates, making the grade suitable for component series where consistency matters. Integration, handling and procurement advantages The CNMG-format insert is compatible with a wide range of standard indexable turning holders, enabling rapid replacement and minimal downtime. The ISO designation aids inventory control and simplifies tool selection in mixed-line production. Walter Tools’ focus on process stability and edge integrity means the insert is a pragmatic choice where repeatable performance and predictable tool life are required rather than experimental or niche solutions. For process-critical stainless steel turning, contact Metav Werkzeuge to specify the CNMG160612-RM5 WMP30G insert from Walter Tools and arrange tailored application support and delivery. Technical Data Article number: CNMG160612-RM5-WMP30G-WALTER Description: Drehwendeschneidplatte CNMG160612-RM5 WMP30G Manufacturer: Walter Tools Core data Insert size: 16 mm Corner radius: 1.2 mm Geometry: Rhombus 80° Clearance angle: 0° (negative) Thickness code: 06 Tolerance class: M Design & special features Grade: WMP30G (coated carbide, Tiger·tec Gold series) Chipbreaker: RM5 Material application: stainless steel (material group M) ISO designation: CNMG160612-RM5 WMP30G Series: Tiger·tec Gold FAQ What material is the CNMG160612-RM5 WMP30G optimised for? The CNMG160612-RM5 WMP30G insert is optimised for stainless steel and selected specifically for material group M applications. How does the RM5 chipbreaker affect machining? The RM5 chipbreaker on the CNMG160612-RM5 promotes short, controlled chips and stable chip evacuation, improving process reliability during turning. Is this insert compatible with standard CNMG toolholders? Yes, the CNMG form and ISO designation ensure compatibility with standard indexable turning holders designed for CNMG inserts. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WMP30G grade enhances wear resistance and edge stability, extending useful tool life in challenging stainless steel operations. Can the insert be used for interrupted cuts? The 1.2 mm corner radius and robust geometry make the insert suitable for intermittent cuts typical in medium to heavy turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and Walter Tools. The offered article is an original, factory-new product of the manufacturer.
CNMG160612-RM5 WSM10S WSM10S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, the RM5 chipbreaker and a 1.2 mm corner radius for secure machining of stainless steels and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or request tailored advice from the consultants. CNMG160612-RM5 WSM10S indexable turning insert — Tiger·tec Silver for stainless steels and superalloys | Walter Tools CNMG160612-RM5 WSM10S is an indexable turning insert designed for demanding turning of stainless steels and heat‑resistant superalloys in industrial production. Tiger·tec Silver coating for improved wear resistance WSM10S grade for stainless steel and superalloys RM5 chipbreaker for controlled chip formation Rhombic 80° form with 1.2 mm corner radius Reliable edge performance under thermal and mechanical stress The WSM10S grade, as realised in the Tiger·tec Silver family, offers a coated carbide composition engineered for the specific challenges of stainless steels and superalloys. These materials generate heat, promote built‑up edge and place high demands on the cutting edge; the coating improves heat resistance and flank wear, which extends tool life and supports consistent surface quality. The result is a predictable machining process with fewer unplanned tool changes and a higher overall output per cutting edge. Controlled chips and stable cutting for uninterrupted productivity The RM5 chipbreaker is tuned for controllable chip formation when machining tough materials. Combined with the 1.2 mm corner radius, the geometry reduces the risk of edge chipping and distributes cutting forces more evenly across the insert, which is especially advantageous in interrupted cuts or heavy feeds. This combination enhances process security and reduces the frequency of tool inspections, supporting leaner production cycles and improved machining efficiency. Geometry designed for versatility and clamping reliability The Rhombic 80° shape provides a balanced approach between access to workpiece features and strong cutting edge support. The insert’s designation indicates the CNMG geometry with the RM5 chip control and the WSM10S grade—an arrangement that suits both continuous and mixed turning tasks. The negative 0° relief (as specified) offers a robust cutting edge for tougher engagement conditions, while the insert size supports a wide range of toolholder systems for straightforward integration into existing turning cells. For machining requiring high process reliability with Walter Tools' Tiger·tec Silver technology, contact Metav Werkzeuge for application advice and availability: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: CNMG160612-RM5-WSM10S-WALTER Designation: CNMG160612-RM5 WSM10S Series: Tiger-tec Silver Core dimensions Insert size: 16 Corner radius: 1.2 mm Free angle: 0° (negative) Plate shape: Rhombus 80° Thickness code: 06 Materials & features Grade: WSM10S Chipbreaker: RM5 Tolerance class: M Applicable material groups: stainless steels; heat‑resistant superalloys and titanium FAQ Is this insert suitable for machining stainless steels? The CNMG160612-RM5 WSM10S insert in Walter Tools' Tiger·tec Silver range is specified for stainless steels and offers enhanced heat and wear resistance for such applications. What advantage does the RM5 chipbreaker provide? The RM5 chipbreaker on the CNMG160612-RM5 WSM10S promotes controlled chip formation and reduces the likelihood of entangling or long stringy chips when machining tough materials. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius increases edge strength and distributes cutting stresses, which improves wear behaviour and tolerance to interrupted cuts for the CNMG160612-RM5 WSM10S insert. Can the insert be used for heat‑resistant superalloys and titanium? Yes, the WSM10S grade and Tiger·tec Silver coating are designed to handle heat‑resistant superalloys and titanium, offering improved edge stability under thermal load. What is the significance of the Rhombic 80° shape and negative 0° relief? The Rhombic 80° geometry gives versatile access and stable edge support, while the negative 0° relief enhances edge robustness for demanding engagement conditions with the CNMG160612-RM5 WSM10S. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the brand owners. The offered item is an original, factory‑new product of the manufacturer. The Walter AG brand is referenced for product identification and explanation purposes only.
CNMG160612-RM5 WSM20S RM5 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating for high wear resistance, the RM5 chipbreaker for consistent chip control and the robust 80° rhombic geometry for stable turning; order the CNMG160612‑RM5 WSM20S directly via Metav Werkzeuge or consult the specialists if further advice is required. CNMG160612‑RM5 WSM20S — Turning indexable insert, Tiger·tec Silver, Walter Tools The CNMG160612‑RM5 WSM20S is a negative‑rake, rhombic 80° turning insert developed for machining stainless steels and heat‑resistant superalloys in demanding production environments. Tiger·tec Silver coated carbide grade WSM20S Optimised RM5 chipbreaker for stable chips Suitable for stainless steels and superalloys 1.2 mm corner radius with 80° rhombic geometry High‑temperature resistance and consistent wear performance for tougher materials The Tiger·tec Silver coating combined with the WSM20S grade provides enhanced wear resistance and thermal stability in the cut, making the insert suitable for machining stainless steels (ISO group M) and heat‑resistant alloys (ISO group S). The coated carbide construction ensures a longer tool life under elevated temperatures and improves process reliability when materials tend to work‑harden or produce adhesive build‑up. This technical pairing supports steady production rates and reduces unscheduled tool changes. Predictable chip control and edge stability for safer operations The RM5 chipbreaker is engineered to produce short, manageable chips and maintain a stable cutting edge even under challenging material behaviour. With a 0° (negative) effective rake and a 1.2 mm corner radius, the insert delivers repeatable cutting forces and less tendency for edge chipping. These characteristics translate into improved surface finishes and lower vibration, supporting higher feed rates and consistent component quality on both CNC lathes and turning centres. Geometry and format designed for flexible, productive turning The CNMG form with its 80° rhombic shape and standard insert size allows for versatile application windows from light finishing to robust medium cutting, depending on toolholder set‑up. The thickness and form code ensure stable clamping in standard indexable toolholders and reliable index‑to‑index repeatability. As a result, the turning insert supports productive machining strategies while keeping process variation and down‑time to a minimum, contributing to overall manufacturing efficiency and predictable part tolerances. For process optimisation in stainless and heat‑resistant alloy turning, contact Metav Werkzeuge for technical guidance on the Walter Tools CNMG160612‑RM5 WSM20S or request availability via info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: CNMG160612-RM5-WSM20S-WALTER Designation: CNMG160612-RM5 WSM20S Label: Drehwendeschneidplatte CNMG160612-RM5 WSM20S Walter Tools Brand: Walter Tools Product type: Turning indexable insert Dimensions & Core Data Insert size: 16 Corner radius: 1.2 mm Thickness code: 06 Insert form: Rhombus 80° Free cutting angle: 0° (negative) Chipbreaker: RM5 Tolerance class: M Materials & Special Features Series: Tiger·tec Silver Grade: WSM20S Substrate/coating: Coated carbide Material suitability: S / M (superalloys/titanium and stainless steels) Application note: Designed for difficult‑to‑cut materials and, depending on geometry, stainless steels FAQ What materials is this insert intended for? The CNMG160612‑RM5 WSM20S is specified for ISO groups M and S, making it suitable for stainless steels and heat‑resistant superalloys when using the Tiger·tec Silver grade. Which chip behaviour can be expected with the RM5 chipbreaker? The RM5 geometry on this Walter Tools insert produces short, controllable chips and stabilises the cutting edge for consistent surface quality and safer chip evacuation. Is the insert suitable for finishing and roughing? The 80° rhombic CNMG form with a 1.2 mm corner radius offers flexibility: with appropriate toolholder and cutting data, it can be applied from finishing to medium turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools and other brand names mentioned are protected trademarks and the property of their respective owners. Brand names and protected designations are cited for explanation only. There is no affiliation between our company and the mentioned manufacturers. The offered item is an original, factory‑new product of the manufacturer.
CNMG160612-RM5 WSM30S WSM30S Wendeplatten - Walter Tools
Benefit from the combination of advanced coating technology, stable chip control and robust geometry for consistent productivity; order directly through Metav Werkzeuge or consult the technical team for application advice. Turning indexable insert CNMG160612-RM5 WSM30S (CNMG160612-RM5) — Tiger‑tec Silver, for rostfreier Stahl | Walter Tools The CNMG160612-RM5 WSM30S is a rhombic 80° turning insert designed for demanding machining of rostfreier Stahl and heat‑resistant superalloys, combining a Tiger‑tec Silver coating with a stable RM5 chipbreaker for reliable cutting performance. Tiger‑tec Silver coated carbide technology Optimised for rostfreier Stahl and superalloys Rhombic 80° geometry, 1.2 mm corner radius Negative 0° rake with RM5 chipbreaker Durable coating for thermally demanding cuts The Tiger‑tec Silver coating together with the WSM30S grade provides thermal resistance and wear stability where heat concentration and workpiece adhesion are typical. This combination supports secure chip formation and helps prevent built‑up edge on challenging materials, notably rostfreier Stahl and high‑temperature alloys. By focusing on coating performance and substrate quality, the insert delivers repeatable cutting behaviour and longer tool life in continuous production environments. Geometry and chip control that stabilise the process A rhombic 80° form with a 1.2 mm corner radius and negative 0° rake creates a robust cutting edge that resists chipping under intermittent engagement and variable feeds. The RM5 chipbreaker is engineered for controlled fragmentation and evacuation, reducing the risk of long, continuous chips and improving surface integrity. These geometric features translate into predictable tool wear and more consistent component tolerances in serial turning operations. Boosted productivity with consistent surface quality Thanks to the coated carbide grade and edge design, the insert supports increased cutting speeds and extended index intervals, which reduces non‑productive time and tool change frequency. The combination of thermal stability and a stable cutting edge makes this insert particularly suited to processes where cycle time and surface finish are both critical. Walter Tools' engineering background contributes to process reliability and toolstand consistency across batches and shifts. Clear application guidance and compatibility overview The insert is classified for ISO groups M and S, meaning suitability for rostfreier Stahl and heat‑resistant superalloys/titanium respectively. For best results, stable clamping and appropriate cutting parameters adapted to the workpiece hardness are recommended; coolant strategy should follow the machine and material specifications. For additional machining parameters or material‑specific recommendations, Metav Werkzeuge provides technical support and selection assistance tailored to the production scenario. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger‑tec Silver inserts and ensure the CNMG160612‑RM5 WSM30S is specified correctly for the intended rostfreier Stahl or superalloy application Technical data Article number: CNMG160612-RM5-WSM30S-WALTER Designation: CNMG160612-RM5 WSM30S Product type: Turning indexable insert (Drehwendeschneidplatte) Brand: Walter Tools Series: Tiger‑tec Silver Facts Corner radius: 1.2 mm Insert size: 16 Thickness: 06 Free angle: 0° (negative) Geometry: Rhombus 80° Tolerance class: M Execution: G Special features Coating: Tiger‑tec Silver Grade / sort: WSM30S Chipbreaker: RM5 Material suitability: S / M Suitable for: rostfreier Stahl; heat‑resistant superalloys and titanium (ISO S) Ideal for: machining demanding, heat‑sensitive materials FAQ What materials is this insert suitable for? The CNMG160612‑RM5 WSM30S insert is designed for ISO groups M and S, making it suitable for rostfreier Stahl and heat‑resistant superalloys (including certain titanium applications) when matched with proper cutting parameters. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating on the WSM30S grade enhances thermal resistance and wear stability, which supports secure chip formation and a longer effective tool life under elevated cutting temperatures. What is the purpose of the RM5 chipbreaker? The RM5 chipbreaker provides controlled chip fragmentation and evacuation, which reduces the likelihood of continuous chips and helps maintain surface quality and machine uptime. Is the negative 0° rake suitable for finishing work? The negative 0° rake and 1.2 mm corner radius prioritise edge strength and stability; depending on feed and speed, the insert can achieve good surface finishes while offering resistance to edge damage in semi‑finishing and finishing passes. Which product code should be referenced when ordering? Please refer to SKU CNMG160612‑RM5‑WSM30S‑WALTER and the designation CNMG160612‑RM5 WSM30S when specifying this Walter Tools turning insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners and are mentioned here solely for explanatory purposes. There is no affiliation between Metav Werkzeuge and the mentioned brands; the offered item is an original, new product from the stated manufacturer.
CNMG160612-RP5 WKK20S WKK20S Wendeplatten - Walter Tools
Benefit from efficient, productive turning of cast iron thanks to the combination of the Tiger·tec Silver coating and the WKK20S grade, which deliver stable chip formation and extended tool life. Order the inserts directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. CNMG160612-RP5 WKK20S — indexable turning insert, Tiger·tec Silver for cast iron (Walter Tools) CNMG160612-RP5 WKK20S is a rhombic 80° indexable turning insert for productive cast iron machining, featuring a 0° negative rake and the RP5 chipbreaker for controlled chip breaking. Tiger·tec Silver coating for wear resistance Optimised for cast iron (K) applications Rhombic 80° form, 1.2 mm corner radius Negative 0° rake for stable cutting High productivity and predictable tool life for cast iron work The combination of the Tiger·tec Silver technology and the WKK20S carbide grade is tailored to cast iron machining, focusing on abrasion resistance and coping with short, brittle chips. This results in a more predictable tool life and fewer unplanned stoppages on the shop floor. The coated substrate reduces flank wear under typical machining conditions, so production runs maintain dimensional consistency while reducing tool-change frequency and setup interruptions. Consistent chip control and surface quality from proven geometry The Rhombus 80° geometry with a 1.2 mm corner radius and the RP5 chipbreaker deliver stable chip formation and reliable evacuation during turning operations. The insert’s 0° (negative) relief angle supports robust cutting engagement and improved stability when heavy cuts or interrupted cuts are required. Together, these characteristics help to achieve repeatable surface finish and reduced risk of chatter on cast iron components, supporting efficient downstream processing. Practical advantages at the toolholder level and application guidance As an indexable turning solution from Walter Tools, this insert is suitable for standard CNMG toolholders and is coded for cast iron use (material group K). The design simplifies inventory management by providing a universal option for many cast-iron turning tasks, while the RP5 chipbreaker minimises secondary operations caused by uncontrolled chips. For process optimisation, consult Metav Werkzeuge’s application advice to select cutting parameters and holder geometry that match workpiece hardness and cycle demands. Contact Metav Werkzeuge today for tailored machining recommendations for Walter Tools CNMG160612-RP5 WKK20S inserts — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data SKU: CNMG160612-RP5-WKK20S-WALTER Designation: CNMG160612-RP5 WKK20S Series: Tiger·tec Silver Grade: WKK20S Chipbreaker: RP5 Numbers / Core technical data Plate size: 16 Corner radius: 1.2 mm Relief angle: 0° Plate form angle: 80° Thickness code: 06 Tolerance class: M Special features / Versions Coated carbide grade Application: cast iron (K) Rhombus 80° plate form Negative geometry (0°) Manufacturer: Walter Tools FAQ What materials is this insert intended for? The CNMG160612-RP5 WKK20S insert is optimised for machining cast iron (material group K) and is designed to handle the abrasive wear and short, breaking chips typical of these materials. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on the CNMG160612-RP5 WKK20S improves chip control and evacuation during turning, reducing entanglement and supporting consistent surface finish on cast iron components. Can this insert be used in conventional CNMG toolholders? Yes, the CNMG160612-RP5 WKK20S conforms to standard CNMG dimensions and can be mounted in compatible indexable turning toolholders for typical lathe setups. What are the main benefits of the Tiger·tec Silver technology? Tiger·tec Silver coating on the WKK20S grade enhances wear resistance and helps maintain cutting-edge stability under abrasive conditions, contributing to longer, more reliable cutting cycles. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no affiliation or partnership between our company and the brands cited. The offered item is an original, brand-new product from the stated manufacturer.
CNMG160612-RP5 WPP05G Wendeplatten - Walter Tools
Take advantage of a Tiger·tec Gold coated, wear-resistant grade combined with a 1.2 mm corner radius and negative geometry for dependable steel turning — order directly via Metav Werkzeuge or consult our specialists for machining recommendations. CNMG160612-RP5 WPP05G indexable turning insert for steel by Walter Tools, Tiger·tec Gold, 1.2 mm radius The CNMG160612-RP5 WPP05G is a coated carbide indexable insert designed for general steel turning applications, offering a balance of wear resistance and toughness for stable, productive machining. Tiger·tec Gold coated carbide For steel machining (ISO P) 1.2 mm corner radius Consistent productivity for steel turning operations The Tiger·tec Gold coating and the WPP05G coated carbide grade provide a durable cutting edge that helps maintain process reliability over extended tool life. In practical terms, the combination of coating and substrate reduces flank wear and supports repeatable performance across batch runs. The insert’s negative 0° relief contributes to robust engagement in interrupted cuts and heavy feed conditions, making the geometry particularly suitable where cutting forces must be absorbed without sacrificing stability. Controlled chip formation and surface quality With a dedicated chipbreaker configuration (RP5) and a Rhombus 80° shape, the insert is optimised to produce predictable chips when machining steels conforming to ISO P. Predictable chip control reduces the need for secondary handling and improves shop-floor throughput. The 1.2 mm corner radius delivers a compromise between edge strength and achievable surface finish, so users can expect a reliable surface quality on semi-finishing and general turning tasks without excessive tool wear. Application guidance for machining strategies This insert is appropriate for a wide range of steel grades and typical turning tasks where a balance of wear resistance and toughness is required. Use the insert for medium to heavy cuts where stable tool life and consistent results are priorities. When adapting cutting data, consider the coated carbide grade’s preference for moderate cutting speeds and coolant usage as appropriate for the workpiece material to extend tool life and maintain component tolerances. Practical benefits for production environments The insert’s 16 mm inscribed circle and 6 mm thickness allow straightforward integration into standard CNMG toolholders, while the tolerance class M ensures interchangeability and predictable seating. The combination of geometry and the Tiger·tec Gold series supports operators who require efficient, repeatable turning with reduced downtime for insert changes. Where process consistency and reduced rework are important, this grade delivers a measurable improvement in operational reliability. For machining projects demanding robust steel performance with a reliable coated carbide grade, contact Metav Werkzeuge for application advice and availability of Walter Tools Tiger·tec Gold inserts via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: CNMG160612-RP5-WPP05G-WALTER Designation: CNMG160612-RP5 ISO designation: CNMG160612-RP5 WPP05G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP05G Product type: turning indexable insert Core data Inscribed circle: 16 mm Thickness: 6 mm Corner radius: 1.2 mm Relief angle: 0° (negative) Shape: Rhombus 80° Chipbreaker: RP5 Tolerance class: M Special features Coating/grade: Tiger·tec Gold (coated carbide WPP05G) Suitable for: Steel (ISO P) Geometry: negative relief, robust cutting direction Designed for the heat and chip formation typical of steel machining FAQ What materials is the CNMG160612-RP5 WPP05G suitable for? The CNMG160612-RP5 WPP05G insert from Walter Tools is designed for machining steels (ISO P), providing a balance of wear resistance and toughness for general turning tasks. What is the corner radius and how does it affect cutting? The insert has a 1.2 mm corner radius, which increases edge strength for durability while still enabling acceptable surface finish in semi-finishing and general turning operations. Which series and grade does the insert belong to? The grade is WPP05G from the Tiger·tec Gold series by Walter Tools, a coated carbide formulation optimised for steel applications. What are the main geometric characteristics of the insert? The insert features a Rhombus 80° shape, a 16 mm inscribed circle, 6 mm thickness, RP5 chipbreaker and a negative 0° relief angle for stable cutting behaviour. Is this insert suitable for finishing or roughing operations? The WPP05G grade is a versatile coated carbide designed to perform across a range of steel turning tasks, offering sufficient wear resistance for continuous operations and toughness for heavier cuts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanation only. There is no association between our company and the named brands. The offered item is original, factory-new goods of the manufacturer.
CNMG160612-RP5 WPP10G G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the RP5 chipbreaker and a rhombic 80° geometry for stable, productive steel turning; order directly via Metav Werkzeuge or consult our specialists for application advice. CNMG160612-RP5 WPP10G turning insert – Tiger·tec Gold, RP5 chipbreaker (Walter Tools) The CNMG160612-RP5 WPP10G is a rhombic 80° turning insert for steel machining, designed to combine reliable chip control with high wear resistance for general turning applications Tiger·tec Gold coated grade WPP10G Optimised RP5 chipbreaker for steel Rhombic 80° form, 1.2 mm corner radius Negative 0° rake for robust cutting Improved productivity through controlled chip formation The coated cutting grade in this series combines a dedicated chip control geometry with a high-performance coating to reduce interruptions and increase productive cutting time. The integrated RP5 chipbreaker channels swarf reliably during turning in steel, promoting shorter, controllable chips that lower the risk of entanglement and reduce secondary operations. For shops seeking predictable cycle times, this insert’s design translates into fewer stoppages and a steadier machining rhythm, which directly supports throughput improvements on reliable turning centres. Stable cutting edge and secure toolholding for tougher cuts A stable insert geometry provides mechanical strength where it matters. The rhombic 80° shape together with a 1.2 mm corner radius and negative 0° rake angle delivers greater edge robustness for interrupted cuts or heavier depths of cut. The classification tolerance class M ensures consistent seat fit and repeatable positioning in standard CNMG toolholders. This combination allows operators to take confident passes with a focus on surface quality and dimensional stability rather than compensating for insert movement or poor clamping. Long life and consistent process security with Tiger·tec Gold The WPP10G grade is a coated carbide optimised for the ISO P material family and benefits from the Tiger·tec Gold coating technology, providing enhanced wear resistance and thermal stability during typical steel turning operations. The grade balances wear resistance and toughness — listed as more wear-resistant and universally applicable across many steels — which supports longer tool life and fewer indexings. As a result, process reliability increases and tool-change frequency is reduced, contributing to lower unit costs and steadier production runs. Contact Metav Werkzeuge for tailored recommendations and to order Walter Tools Tiger·tec Gold inserts; Metav Werkzeuge can advise on optimal cutting data and application fit for specific steel grades Technical Data SKU: CNMG160612-RP5-WPP10G-WALTER Designation: CNMG160612-RP5 WPP10G Type: Turning insert Series: Tiger·tec Gold Manufacturer: Walter Tools Dimensions & core data Insert size: 16 Thickness code: 06 Corner radius: 1.2 mm Tolerance class: M Rake angle: 0° (negative) Materials & features Grade: WPP10G Coating technology: Tiger·tec Gold Chipbreaker: RP5 Form: Rhombic 80° Applicable material group: P (steel) Execution: G FAQ Which materials is this insert suitable for? The CNMG160612-RP5 WPP10G is designed for the ISO P group, meaning it is intended primarily for the efficient machining of unalloyed and alloyed steels. What benefit does the RP5 chipbreaker provide? The RP5 chipbreaker helps to form short, manageable chips during steel turning, improving machine uptime and reducing the need for additional chip handling measures when using this insert. How does the negative 0° rake affect performance? A negative 0° rake enhances edge strength and resistance to chipping under heavy or interrupted cuts; the CNMG160612-RP5 configuration therefore favours robust cutting conditions. Is the WPP10G grade suitable for finishing and roughing? The WPP10G grade is formulated as a balanced coated carbide that offers wear resistance with sufficient toughness, making it versatile across many turning operations from general finishing to productive roughing in steel. What geometry details are relevant when selecting a holder? Key details are the rhombic 80° form, the 1.2 mm corner radius and the insert size code 16; these determine compatible CNMG toolholders and the expected cutting line position. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, brand-new goods from the manufacturer.
CNMG160612-RP5 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the RP5 chipbreaker for reliable chip control and longer tool life; the negative 0° rake and 1.2 mm corner radius deliver stable turning results in Stahl. Order directly via Metav Werkzeuge or consult the team for process optimisation. CNMG160612-RP5 WPP20G — Turning indexable insert, Tiger‑tec Gold, RP5 chipbreaker (Walter Tools) A CNMG160612-RP5 WPP20G turning insert designed for productive turning of Stahl components, combining a coated carbide grade with a robust chipbreaker for consistent machining performance CNMG 80° rhombic geometry Tiger‑tec Gold coated carbide grade RP5 chipbreaker for reliable chip control Negative 0° rake with 1.2 mm corner radius Increased productivity through advanced coating and grade The combination of the Tiger‑tec Gold technology and the WPP20G grade provides a balance of wear resistance and toughness that supports longer tool life and fewer insert changes. The coating improves thermal resistance during extended cuts, which reduces downtime and contributes directly to higher machine availability. This benefit is particularly relevant in batch production and series turning tasks where steady cutting conditions translate into predictable throughput. The CNMG geometry also helps maintain cutting stability when changing from roughing to finishing passes. Consistent chip control and surface quality Thanks to the RP5 chipbreaker and the rhombic 80° geometry, the insert creates controlled chip formation that eases chip evacuation and reduces the risk of built-up edge. Controlled chip flow improves component surface quality and minimises secondary operations. The negative 0° rake angle provides stronger cutting edge support in interrupted cuts, while the 1.2 mm corner radius contributes to a robust corner that resists edge chipping during heavier engagement. These features lead to repeatable results and less scrap in daily production. Optimised for Stahl turning applications This grade is specified for machining Stahl, addressing the thermal and mechanical behaviour typical of unalloyed and alloyed steels. The coated carbide substrate supports medium to high cutting speeds and offers a consistent balance between wear resistance and toughness, which is advantageous when working across a variety of steel alloys. The insert’s tolerance class M ensures interchangeability and reliable seating in standard toolholders, simplifying tool management across toolrooms and production lines. Practical handling and process advantages The CNMG form and the standardised designation make tool selection straightforward and reduce setup time. With the clear specification of chipbreaker, radius and rake, process planning becomes simpler and tool lists remain concise. The insert supports efficient inventory rotation and is compatible with common toolholder systems that accept CNMG geometry. For applications requiring verification or adaptation of cutting data, the Metav Werkzeuge team can assist with process parameters to match material grades and machine capability. For tailored recommendations or to request technical advice on integrating the Walter Tools CNMG160612-RP5 WPP20G insert into a specific turning process, contact Metav Werkzeuge via info@metav-werkzeuge.com or by phone at +49 2822 7131930 — consultants are available to support tooling selection and process optimisation. Technical Data Article number: CNMG160612-RP5-WPP20G-WALTER Designation: CNMG160612-RP5 WPP20G Manufacturer: Walter Tools Series: Tiger-tec Gold Facts Geometry: Rhombus 80° Size: 16 Thickness: 06 Corner radius: 1,2 mm Free angle: 0° (negative) Tolerance class: M Chipbreaker: RP5 Materials & Coating Coating: WPP20G Substrate: Coated carbide Application: Stahl FAQ What materials is this insert suitable for? The CNMG160612-RP5 WPP20G insert is specified for machining Stahl and is optimised to handle the typical heat and chip formation behaviour of unalloyed and alloyed steels. How does the RP5 chipbreaker benefit machining? The RP5 chipbreaker promotes consistent chip formation and evacuation, reducing the risk of entanglement and improving surface finish when using the CNMG160612-RP5 WPP20G insert. Is the 1.2 mm corner radius suitable for finishing passes? A 1.2 mm corner radius provides robust edge strength and is suitable for both semi-finishing and finishing in many Stahl turning operations, offering a compromise between edge durability and surface quality. What does the WPP20G grade mean for tool life? The WPP20G grade, part of the Tiger‑tec Gold series, balances wear resistance and toughness to deliver extended tool life in a range of Stahl applications under typical turning conditions. Can the insert be used in interrupted cuts? Yes, the negative 0° rake angle and the robust corner radius make this insert well suited to interrupted cutting situations where edge stability is critical. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; Responsible brand information: Walter Tools is part of the Walter AG group and is associated with global precision-tool expertise. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG160612-RP5 WPP30G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coated grade and the RP5 chipbreaker for consistent productivity and reduced downtime; the robust rhombic 80° geometry and 1.2 mm corner radius ensure reliable edge life in steel turning. Order the insert directly via Metav Werkzeuge or consult the sales team for application-specific recommendations. CNMG160612-RP5 WPP30G Drehwendeschneidplatte by Walter Tools — Tiger·tec Gold coated carbide, RP5 chipbreaker CNMG160612-RP5 WPP30G is a rhombic 80° indexable turning insert designed for machining steel under ISO P conditions, combining a wear-resistant coating with a chipbreaker tailored to steel applications Tiger·tec Gold coating for high wear resistance WPP30G grade optimised for steel machining RP5 chipbreaker for reliable chip control Rhombic 80° form, 1.2 mm corner radius High-performance coating and grade for demanding steel cuts The combination of the Tiger·tec Gold coating and the WPP30G coated carbide substrate delivers elevated resistance to flank and crater wear during typical steel machining cycles. Designed for ISO P materials, this insert provides a stable cutting edge which leads to longer tool life and more consistent component quality. The RP5 chipbreaker is engineered to promote favourable chip formation when turning unalloyed and alloyed steels, reducing the need for frequent operator intervention and supporting a smoother production flow. Geometry that supports secure cutting and predictable results The rhombic 80° profile gives versatile approach angles and a strong cutting edge for a wide range of turning operations, from semi-finishing to robust machining. A negative rake of 0° improves stability during interrupted cuts and heavy depths of cut, while the 1.2 mm corner radius balances edge strength with achievable surface finish. Tolerance class M ensures repeatable geometry for tool-change consistency and reliable dimensional control in serial production. Integrates into standard tooling and improves process security The insert’s designation and form are compatible with common CNMG toolholders, enabling straightforward integration into existing turning setups. As a coated indexable insert with consistent batch properties, it supports predictable wear patterns and simplifies machining parameter development. The result is fewer unexpected stoppages, lower scrap rates and an overall increase in net productivity per machining hour. Practical benefits and recommended applications Optimised for machining steel, this insert performs well in general turning tasks where wear resistance and chip control determine cycle time and part quality. Use the insert for medium- to high-feed operations where the RP5 chipbreaker helps maintain manageable chips and the Tiger·tec Gold coating reduces thermal wear. The design is particularly advantageous for production environments seeking a balance between tool life and surface quality, offering a cost-effective solution through reduced insert changes and consistent finish. For application advice or recommendations on toolholders and cutting data for Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge — their consultants provide practical guidance tailored to specific steel grades and machining strategies Technical data Article number: CNMG160612-RP5-WPP30G-WALTER Designation: CNMG160612-RP5 WPP30G Series: Tiger·tec Gold Facts Plate size: 16 Thickness code: 06 Corner radius: 1,2 mm Rake angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Grade: WPP30G Chipbreaker: RP5 Form: Rhombus 80° Suitable for: Steel (ISO P) Execution: G FAQ What materials is this insert suitable for? The CNMG160612-RP5 WPP30G is formulated for ISO P materials and is suitable for unalloyed and alloyed steel machining. What advantages does the Tiger·tec Gold coating offer? The Tiger·tec Gold coating on the WPP30G grade enhances wear resistance and thermal stability, resulting in longer edge life and more consistent performance in steel turning. How does the RP5 chipbreaker influence machining? The RP5 chipbreaker promotes controlled chip formation when cutting steel, which simplifies chip handling and reduces the risk of built-up edge. What does the 0° negative rake imply for operation? A 0° negative rake provides increased edge strength and stability during heavier cuts or interrupted machining, helping to avoid premature edge damage. Is this insert compatible with standard CNMG toolholders? Yes, the rhombic CNMG form and sizing are compatible with common CNMG toolholders for indexable turning applications. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and product names are the property of their respective owners. The mentioned brand is used for explanatory purposes only; the offered item is original, factory-new merchandise of the manufacturer.
CNMG160612-RP7 WKP30S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP30S grade for extended tool life and reliable chip control; the RP7 chipbreaker and rhombic 80° geometry ensure stable performance in steel and cast iron turning. Order directly via Metav Werkzeuge or contact our consultants for tailored advice. CNMG160612-RP7 WKP30S indexable turning insert — Walter Tools — Tiger·tec Silver, RP7 chipbreaker CNMG160612-RP7 WKP30S is an indexable turning insert designed for precise and productive turning operations on steel and cast iron components Tiger·tec Silver coating for long tool life RP7 chipbreaker for controlled chip formation Rhombic 80° form with 1.2 mm corner radius Optimised for steel and cast iron machining Durable coating for consistent tool life and economy The Tiger·tec Silver technology and the WKP30S grade combine to provide a coated carbide substrate that is optimised for the thermal and abrasive conditions found when machining steel and cast iron. The coating reduces flank wear and helps maintain a stable cutting edge over longer cycles, which translates into fewer tool changes and lower unit costs in batch production. These material and coating choices are reflected in reproducible tool life and predictable process windows. Predictable chips and surface quality through geometry The RP7 chipbreaker is engineered to produce short, controllable chips when paired with the rhombic 80° insert form and 0° (negative) relief angle. A corner radius of 1.2 mm provides edge robustness and supports consistent surface finish during medium to heavy cuts. The combination of chip control and edge strength reduces the likelihood of built-up edge and improves repeatability, especially in interrupted cuts or mixed material runs. Clear mounting and ISO-compliant geometry for fast tool changeover The insert follows the CNMG geometry standard, which allows use in any toolholder designed for CNMG inserts; the designation CNMG160612-RP7 also indicates the insert shape and nominal dimensions. Tolerance class M and execution G ensure consistent interchangeability in production setups. Thickness code 06 and size 16 correspond to common holder systems and are documented for process planning and tool balancing in machining centres. Process reliability backed by brand engineering Walter Tools’ design focus on stable edge preparation and modern grades supports reliable machining results across a broad material spectrum. The combination of a proven chipbreaker, a robust rhombic form and a high-performance coating means less unplanned downtime and more consistent part quality. For production environments where throughput and repeatability are priorities, this insert contributes to a measurable improvement in process stability and workpiece finish. Contact Metav Werkzeuge for personalised application advice on Walter Tools Tiger·tec Silver inserts and to request cutting data tailored to the machining task Technical Data Article number: CNMG160612-RP7-WKP30S-WALTER Label: Drehwendeschneidplatte CNMG160612-RP7 WKP30S Walter Tools Product type: Drehwendeschneidplatte / indexable turning insert Series: Tiger-tec Silver Grade: WKP30S Chipbreaker: RP7 Insert form: Rhombus 80° Material designation: P / K Manufacturer: Walter Tools Numeric Data Size: 16 Corner radius: 1.2 mm Thickness code: 06 Relief angle: 0° (negative) Tolerance class: M Special features Coated carbide grade WKP30S Optimised for steel and cast iron (ISO 513 groups P and K) Stable chip control with RP7 breaker Robust rhombic 80° geometry Execution: G FAQ What materials is this insert suitable for? The CNMG160612-RP7 WKP30S insert is designed for machining steel and cast iron, following the ISO 513 material groups P and K as indicated by the grade characteristics. Is WKP30S a coated carbide grade? Yes, WKP30S is a coated carbide grade within the Tiger·tec Silver family, optimised for wear resistance and thermal stability during metal cutting. What does the RP7 chipbreaker provide in practice? The RP7 chipbreaker promotes short, controlled chips and improves chip evacuation, which supports safer machining and better surface quality on typical turning operations. Which toolholders accept this insert geometry? The CNMG geometry fits standard toolholders designed for CNMG inserts; the CNMG160612 designation indicates compatibility with holders made for that ISO form and size. How does the 1.2 mm corner radius influence cutting performance? A 1.2 mm corner radius increases edge strength for more robust cutting during heavier passes and contributes to improved surface finish stability compared with smaller radii. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Walter Tools is the brand appearance of Walter AG. Protected trademarks and trade names remain the property of their respective owners. Brand names are used solely for explanation. There is no affiliation between our company and the referenced brands. The offered article is original factory-new goods of the manufacturer.
CNMG160612-RP7 WPP05G Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Gold coated carbide grade and a purpose‑built RP7 chipbreaker for efficient, repeatable steel turning; the rhombic 80° geometry with a 1.2 mm corner radius delivers reliable edge life and predictable chip control. Order directly via Metav Werkzeuge or request application advice from our consultants. CNMG160612‑RP7 WPP05G indexable turning insert — Tiger·tec Gold, for steel machining — Walter Tools A CNMG160612‑RP7 WPP05G indexable turning insert designed for productive machining of steel, combining a Tiger·tec Gold coated carbide grade with an RP7 chipbreaker and rhombic 80° form for consistent cutting performance. CNMG160612‑RP7 WPP05G by Walter Tools Tiger·tec Gold coating for long tool life RP7 chipbreaker optimised for steel machining Rhombic 80° form with 1.2 mm corner radius Consistent productivity from a modern coated grade The combination of the Tiger·tec Gold technology and the WPP05G grade provides a coated carbide composition engineered for the thermal and mechanical demands of steel turning. This coating improves wear resistance and contributes to longer productive life compared with uncoated grades, while the substrate supports stable cutting at typical cutting speeds for steel. For shops seeking measurable throughput gains, the insert’s tailored grade reduces tool change frequency and supports steady process output. Geometry and chip control for dependable results The insert’s rhombic 80° form and the integrated RP7 chipbreaker create a geometry that promotes controlled chip formation and evacuation when machining steel. The 1.2 mm corner radius gives a balance between strength and finishing capability, while the 0° (negative) rake angle provides edge robustness on interrupted cuts and heavy engagement. These features translate into more predictable part quality and fewer process interrupts, particularly on medium to heavy cutting operations. Designed for pragmatic use in industrial turning Specified as suitable for machining steel (P) according to ISO designations, the insert supports a broad range of common unalloyed and alloyed steels encountered in production environments. The CNMG form factor offers versatile positioning for external turning profiles and facing, and the M tolerance class assures repeatable seating and clamping in standard toolholders. Combined, these attributes deliver a balance of productivity and process reliability for batch production and continuous machining tasks. Contact Metav Werkzeuge for tailored cutting data and application recommendations for Walter Tools Tiger·tec Gold inserts to ensure optimal performance in steel machining. Email info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice. Technical Data Article number: CNMG160612‑RP7‑WPP05G‑WALTER Designation: CNMG160612‑RP7 WPP05G Brand: Walter Tools Series: Tiger‑tec Gold Grade: WPP05G Product type: Indexable turning insert Facts Plate size: 16 Thickness: 06 Corner radius: 1.2 mm Relief angle: 0° (negative) Geometry: Rhombic 80° Tolerance class: M Special features Coated carbide grade (Tiger·tec Gold) RP7 chipbreaker for steel applications Suitable for ISO group P (steel) Robust edge for interrupted cuts Reliable seating for CNMG form holders FAQ What materials is this insert suitable for? The CNMG160612‑RP7 WPP05G insert from Walter Tools is designed for ISO group P materials, i.e. a wide range of unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WPP05G grade increases wear resistance and thermal stability, extending tool life and improving process stability during steel turning. What does the RP7 chipbreaker provide in practice? The RP7 chipbreaker offers consistent chip formation and evacuation when machining steel, reducing entanglement and improving surface finish on typical turning operations. Is the corner radius suitable for finishing cuts? With a 1.2 mm corner radius, the insert delivers a compromise between edge strength and surface finishing capability, suitable for many semi‑finishing and finishing tasks. Can this insert handle interrupted cuts? Yes, the negative 0° rake combined with the robust grade makes the insert well suited to interrupted cuts and applications requiring edge stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Walter Tools is mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the trademark owners; the offered item is original, factory‑new product of the manufacturer Walter Tools.
CNMG160612-RP7 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of a Tiger·tec Gold coating and the RP7 chipbreaker in this CNMG insert: high wear resistance and reliable chip control deliver consistent steel-turning performance. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. CNMG160612-RP7 WPP10G Tiger·tec Gold turning insert – for steel, Walter Tools A CNMG160612-RP7 WPP10G turning insert engineered for productive steel machining, combining a Tiger·tec Gold coated carbide grade with an RP7 chipbreaker and a robust rhombic 80° geometry. Tiger·tec Gold coating for extended tool life RP7 chipbreaker for reliable chip control Rhombic 80° shape with 1.2 mm corner radius Negative 0° clearance for heavy cutting Engineered for high-demand steel turning with durable coating The Tiger·tec Gold coating paired with the WPP10G carbide grade offers a balance of wear resistance and toughness tailored to steel machining (ISO P). This coating technology reduces flank and crater wear, which in turn prolongs tool life and maintains cutting-edge stability under elevated temperatures. The specification emphasises repeatable performance in serial production, where reduced tool changes translate directly into higher throughput and predictable process windows. Reliable chip control that improves surface quality and uptime The RP7 chipbreaker is designed to form predictable chips across a wide range of feeds and depths of cut, improving both chip control and component finish. Controlled chip formation decreases the risk of re-cutting and machine interruptions, which supports steady cycle times. For machining operations that prioritise consistent dimensional results, the combination of the chipbreaker geometry and the coating supports lower scrap rates and longer uninterrupted running periods. Geometry and form that suit versatile turning tasks The insert’s rhombic 80° shape and 1.2 mm corner radius enable a good compromise between strength and accessibility: the geometry supports robust turning passes while allowing entry into shoulders and contour features. The designation CNMG160612-RP7 indicates the standardised form factor compatible with common indexable holders; the negative 0° clearance provides stability for heavier cuts and interrupted machining. This geometry helps maintain cutting edge integrity where rigidity and tool support are critical. Productivity gains through fewer tool changes and consistent results Adopting this insert in a production environment can reduce overall tooling costs by extending service intervals and improving machining consistency. The WPP10G grade, developed for steel applications, delivers wear resistance that supports longer intervals between index changes. Stable cutting behaviour and predictable wear patterns contribute to shorter setup times and improved machine utilisation, making the insert suitable for batch production and demanding shop-floor schedules. Contact Metav Werkzeuge for tailored application advice or to secure Walter Tools CNMG160612-RP7 WPP10G turning inserts with Tiger·tec Gold coating Technical data SKU: CNMG160612-RP7-WPP10G-WALTER Label: Drehwendeschneidplatte CNMG160612-RP7 WPP10G Walter Tools Manufacturer: Walter Tools Product type: Turning insert Grade: WPP10G Series: Tiger·tec Gold Designation: CNMG160612-RP7 Numbers / Core technical data Plate size: 16 Thickness designation: 06 Corner radius: 1,2 mm Clearance angle: 0° (negative) Shape: Rhombus 80° Tolerance class: M Designs / Special features Coating technology: Tiger·tec Gold (coated carbide) Chipbreaker: RP7 Grade application: Steel (ISO P) Execution: G Bezeichnung ohne Sorte: CNMG160612-RP7 FAQ What materials is this insert suitable for? The CNMG160612-RP7 WPP10G is formulated for machining steel (ISO P); the WPP10G grade and Tiger·tec Gold coating address the typical heat and chip-formation behaviour of steels. How does the RP7 chipbreaker affect performance? The RP7 chipbreaker promotes stable chip formation and evacuation, which improves surface finish and reduces the likelihood of chip-related interruptions during turning operations. Can the insert handle heavy cuts and interrupted cuts? Yes, the negative 0° clearance and robust rhombic 80° geometry give the insert the edge stability required for heavier feeds and interrupted cuts, supporting reliable material removal. What benefit does the Tiger·tec Gold coating provide? Tiger·tec Gold enhances wear resistance and cutting-edge stability at elevated temperatures, resulting in longer tool life and reduced frequency of index changes in serial production. Is the CNMG160612-RP7 compatible with standard indexable holders? The CNMG form factor follows standard dimensions, making the insert compatible with common turning toolholders specified for CNMG-style indexable inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG160612-RP7 WPP20G Wendeplatten - Walter Tools
Take advantage of a high-performance combination of precise chip control and durable coating for consistently productive turning of steel components — order directly via Metav Werkzeuge or consult our specialists for process recommendations. CNMG160612-RP7 WPP20G turning insert — Rhombic 80°, Tiger·tec Gold coating — Walter Tools The CNMG160612-RP7 WPP20G turning insert is a rhombic 80° indexable insert designed for precision turning of steel in industrial production environments Rhombic 80° insert geometry Tiger·tec Gold coated carbide grade RP7 chipbreaker for stable chip control 1.2 mm corner radius for robust cutting edges Reliable chip control for uninterrupted productivity The combination of the RP7 chipbreaker and the insert geometry delivers consistent chip formation, reducing risk of build-up and machine downtime. This chipbreaker is designed to manage the typical heat and chips when machining steel (ISO P group), which helps to maintain cutting stability in medium to heavy cutting conditions. The outcome is fewer interruptions for chip clearing and a steadier machining process, contributing directly to improved throughput and lower cycle-time variability. Extended tool life thanks to Tiger·tec Gold coating The WPP20G grade from the Tiger·tec Gold family is a coated carbide solution developed for balanced wear resistance and toughness when machining steels. The coating improves thermal stability and protects the cutting edge against abrasive wear, meaning longer intervals between index changes and fewer tool inventories. For production environments this translates into better cost efficiency per part and a more predictable tool consumption profile under mixed steel workloads. Geometry and tolerance tailored for industrial turning The insert’s rhombic 80° shape combined with a 1.2 mm corner radius and 0° negative rake provides a robust edge for interrupted cuts and turning operations that require repeatable edge strength. Tolerance class M supports consistent seating and predictable toolholder behaviour. These geometry choices make the insert suitable for a wide range of turning tasks on steel, from finishing to heavier roughing passes, while preserving surface quality and dimensional stability. Contact Metav Werkzeuge for order placement, application support and to discuss how the Walter Tools CNMG160612-RP7 WPP20G insert can be integrated into specific turning processes Technical data Article number: CNMG160612-RP7-WPP20G-WALTER Label: Drehwendeschneidplatte CNMG160612-RP7 WPP20G Walter Tools Type: Turning indexable insert Grade: WPP20G Series: Tiger·tec Gold Manufacturer: Walter Tools Dimensions / Geometry Inscribed circle: 16 mm Thickness: 6 mm Corner radius: 1.2 mm Relief angle: 0° (negative) Insert form: Rhombic 80° Features / Applications Chipbreaker: RP7 Coating: Tiger·tec Gold (coated carbide) Tolerance class: M Execution / version: G Suitable material group: Steel (ISO P) FAQ What materials is this insert suited for? The CNMG160612-RP7 WPP20G insert is optimised for machining steel (ISO P); the WPP20G grade balances wear resistance and toughness for common steel alloys. What chip control can be expected with this insert? The RP7 chipbreaker promotes stable chip formation and evacuation when turning steel, improving process reliability and reducing the need for manual chip clearing. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP20G grade increases thermal stability and edge protection, which extends tool life and delivers consistent results in production turning with Walter Tools inserts. Is the insert suitable for interrupted cuts or heavy roughing? Yes — the rhombic 80° geometry, 1.2 mm corner radius and 0° negative rake give the insert a robust edge for interrupted cuts and heavier turning operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com