CNMG160616-RP7 WPP05G WPP05G Wendeplatten - Walter Tools
Efficient steel turning with the WPP05G grade and Tiger·tec Gold coating provides extended tool life and stable chip formation; combined with the RP7 chipbreaker and a 1.6 mm corner radius, the insert delivers consistent performance and reduced downtime. Order the CNMG160616-RP7 WPP05G indexable turning insert directly via Metav Werkzeuge or ask the consultants for application support. CNMG160616-RP7 WPP05G indexable turning insert — Tiger·tec Gold coating, for steel (Walter Tools) A CNMG160616-RP7 WPP05G is an indexable turning insert engineered for general steel machining, offering a robust coated-carbide grade and optimised chip control for reliable production. Tiger·tec Gold coating for longer tool life RP7 chipbreaker for stable chip formation Rhombic 80° form with 1.6 mm corner radius Negative 0° free angle for heavy cuts Proven wear resistance for productive steel machining The coated-carbide WPP05G grade, presented in the Tiger·tec Gold series, emphasises wear resistance and consistent edge stability under typical steel cutting conditions. This creates a tangible efficiency gain: fewer insert changes and more uninterrupted machining time. The design is particularly suitable for operations where predictable tool life and reproducible results are required, supporting lean production and lower per-part tooling costs without compromising surface quality. Predictable chip control and geometry that aids process reliability The combination of the RP7 chipbreaker with the Rhombic 80° insert geometry and 1.6 mm corner radius enables controlled chip formation when machining steels. The negative 0° free angle contributes to a stable cutting edge under higher cutting forces, making the insert appropriate for medium to demanding turning tasks. These geometrical choices translate into fewer rejects and more consistent tolerances on machined components, strengthening process reliability on serial production runs. Operational benefits: tolerance, fit and compatibility with common toolholders With a tolerance class of M and the CNMG geometry, the insert integrates smoothly into common indexable toolholders used across industry. The 16 designation matches standard inscribed circle sizes for many tool systems, simplifying stocking and replacements. As a coated hardmetal grade, the insert balances toughness and wear resistance, so machining parameters can be tuned for either higher removal rates or improved surface finish depending on the application requirement. Practical selection guidance and brand confidence When selecting this indexable insert, consider the workpiece steel grade and the intended cutting strategy—roughing demands more edge robustness, while finishing benefits from fine feed and lower cutting depth. The Walter Tools Tiger·tec Gold family is engineered for broad applicability in steel machining, offering a reproducible performance profile. For specific cutting-data recommendations or to confirm holder compatibility, technical consultation is available to ensure optimal integration into the production process. Contact Metav Werkzeuge today for tailored recommendations on using Walter Tools' CNMG160616-RP7 WPP05G Tiger·tec Gold inserts in steel turning applications and to arrange technical guidance close to production needs Technical data SKU: CNMG160616-RP7-WPP05G-WALTER Designation: CNMG160616-RP7 WPP05G Product type: indexable turning insert Manufacturer: Walter Tools Facts Corner radius: 1.6 mm Plate size: 16 Thickness designation: 06 Free angle: 0° (negative) Tolerance class: M Plate form: Rhombus 80° Chipbreaker: RP7 Series: Tiger·tec Gold Special features Coating / grade: WPP05G (Tiger·tec Gold) Material: coated carbide Application group: Steel (ISO P) Stable chip formation Optimised for productive steel machining Manufacturer brand: Walter Tools FAQ What materials is this insert designed for? The CNMG160616-RP7 WPP05G indexable turning insert from Walter Tools is specified for steel (ISO P) applications and is engineered to handle the thermal and chip-formation characteristics typical of these materials. Which chipbreaker and geometry does the insert use? This insert features the RP7 chipbreaker together with a Rhombic 80° form and a 1.6 mm corner radius, offering controlled chips and stable cutting behaviour in turning operations. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP05G grade enhances wear resistance and maintains edge stability, resulting in longer tool life and more consistent production performance when machining steel. How does the negative 0° free angle affect cutting? A negative 0° free angle increases edge robustness under higher cutting loads, which benefits heavier cuts and applications requiring steady dimensional control. Is this insert compatible with standard CNMG toolholders? Yes—the CNMG geometry and tolerance class M align with common toolholder systems for this insert size, facilitating straightforward replacement and stocking. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only and do not imply any affiliation. The offered article is an original factory-new product from the manufacturer.
CNMG160616-RP7 WPP10G G Wendeplatten - Walter Tools
Take advantage of the combination of proven wear resistance, reliable chip control and durable edge strength for consistent production results; order directly via Metav Werkzeuge or ask the consultants for application advice. CNMG160616-RP7 WPP10G turning insert for Stahl by Walter Tools The CNMG160616-RP7 WPP10G is a coated carbide turning insert from the Tiger·tec Gold series, engineered for efficient machining of Stahl in general turning applications. Tiger·tec Gold coating for enhanced wear resistance Designed for Stahl machining (ISO group P) RP7 chipbreaker for reliable chip control 0° negative rake, 1.6 mm corner radius Longer tool life through Tiger·tec Gold coating The combination of the Tiger·tec Gold technology and the WPP10G grade delivers coated carbide performance that emphasises consistent wear resistance. This coating technology is designed to reduce flank wear and to maintain a stable cutting edge over prolonged cycles, which in practice means fewer insert changes and more productive machining time on Stahl. For shops seeking to increase uptime, the improved edge stability translates into predictable tool life and lower process variability. Robust cutting performance with controlled chips and strong edges The integrated RP7 chipbreaker supports secure chip control across a range of cutting conditions, making it suitable for continuous and semi-continuous machining operations of Stahl. The 0° negative rake construction enhances edge strength for demanding or interrupted cuts, while the 1.6 mm corner radius contributes to a sturdy cutting geometry that resists chipping. Together these characteristics ensure stable metal removal and reduced risk of unexpected insert failure, supporting reliable takt times on the machine. Consistent fit and process security in production environments Built to a Rhombic 80° form and offered in a 16 mm size with a standard thickness code, the insert complies with common tooling systems and mounting conventions. The tolerance class M provides manufacturing accuracy that helps ensure repeatable seating and alignment in standard toolholders. Classified for ISO group P, the grade targets typical thermal and chip-formation behaviour when machining Stahl, allowing setup parameters to be transferred between batches with minimal adjustment. For operations that prioritise reproducible component quality, this geometry and grade pairing supports process stability and ease of integration. Contact Metav Werkzeuge for personalised cutting data and to secure Walter Tools Tiger·tec Gold inserts optimised for Stahl machining Technical data Article number: CNMG160616-RP7-WPP10G-WALTER Item label: Drehwendeschneidplatte CNMG160616-RP7 WPP10G Walter Tools Manufacturer: Walter Tools Product type: turning insert Series: Tiger·tec Gold Facts Plate form: Rhombic 80° Plate size: 16 mm Corner radius: 1.6 mm Thickness: 06 Free rake angle: 0° (negative) Tolerance class: M Special features Grade: WPP10G (coated carbide) Chipbreaker: RP7 Material group: P (Stahl) Application focus: turning of Stahl FAQ Which materials is the insert suited for? The CNMG160616-RP7 WPP10G insert is specified for ISO group P and is suitable for machining Stahl. What benefit does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WPP10G grade increases wear resistance and helps to maintain a stable cutting edge under continuous production conditions. How does the RP7 chipbreaker affect machining? The RP7 chipbreaker promotes consistent chip control, improving evacuation and reducing the risk of built-up edge during operations on Stahl. What does the 0° negative rake mean for cutting? A 0° negative rake strengthens the cutting edge and improves resistance to impact and chipping, which is beneficial for interrupted cuts or heavier engagement. Is tolerance class M important for production repeatability? Yes, tolerance class M supports repeatable seating and alignment in standard toolholders, aiding consistent part quality and process security. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory reasons only; there is no association between our company and the brands named. The offered article is an original, factory-new product of the manufacturer Walter Tools.
CNMG160616-RP7 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coated carbide reliability, proven chip control and a geometry tailored for steel turning to maintain productive metalcutting cycles; order directly via Metav Werkzeuge or ask the consultants for application support. CNMG160616-RP7 WPP20G – indexable turning insert, Tiger·tec Gold coating for steel | Walter Tools A CNMG160616-RP7 WPP20G indexable turning insert designed for steel turning, offering a rhombic 80° geometry with a 1.6 mm nose radius and RP7 chipbreaker for stable machining. Tiger·tec Gold coated carbide grade WPP20G Designed for ISO P steels Rhombic 80° shape, 1.6 mm nose radius RP7 chipbreaker for stable chip control Proven wear resistance for longer tool life The Tiger·tec Gold coating combined with the WPP20G grade provides enhanced edge stability and wear resistance under the thermal and mechanical loads typical of steel machining. This coating technology reduces flank and crater wear, which translates into consistent surface finish and fewer insert changes during production. Explaining briefly: a coated carbide insert features a hard, wear-resistant layer bonded to a carbide substrate, which improves lifetime without sacrificing toughness. Stable chip formation and reliable process security With the RP7 chipbreaker and a rhombic 80° form, the insert controls chip segmentation and evacuation in a wide range of cutting conditions. The RP7 geometry is engineered to produce predictable chip shapes when cutting steels (ISO P), reducing the risk of entangling chips and enabling safer, more efficient cycles. This results in improved machine uptime and a smoother work sequence on turning centres and lathes. Geometry engineered for accuracy and edge integrity The negative clearance of 0° and the 1.6 mm corner radius deliver a balance between robustness and dimensional control. A negative rake/clearance angle supports stronger cutting edges for interrupted cuts or heavier depths of cut, while the 1.6 mm nose radius helps achieve repeatable part tolerances and acceptable surface quality. For users less familiar with the terms: a corner radius influences both strength of the edge and the achievable surface finish — larger radii increase strength but may slightly affect detail in small-radius profiles. Economic performance in steel applications The grade is specified for the ISO P material group, meaning it is optimised for unalloyed and alloyed steels where heat and continuous chip formation are typical. The combination of a coated carbide grade and a dedicated chipbreaker offers a cost-effective solution by extending edge life and reducing downtime. For production environments focused on repeatability and throughput, this insert supports predictable wear behaviour and stable cycle times. For a practical recommendation on machining parameters or to discuss holder compatibility for Walter Tools inserts, contact Metav Werkzeuge for tailored advice and ordering support Technical data Article number: CNMG160616-RP7-WPP20G-WALTER SKU: CNMG160616-RP7-WPP20G-WALTER Label: Drehwendeschneidplatte CNMG160616-RP7 WPP20G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Facts Plate size: 16 Plate thickness: 06 Corner radius: 1.6 mm Clearance angle: 0° (negativ) Shape: Rhombus 80° Chipbreaker: RP7 Grade/series: WPP20G, Tiger-tec Gold Material code: P Tolerance class: M SKU/UID: CNMG160616-RP7-WPP20G-WALTER Special features Coating technology: Tiger·tec Gold Carbide grade: WPP20G (coated carbide) Application: steel (ISO P) Negative geometry for robust cutting edge Stable chip control with RP7 chipbreaker Rhombic 80° insert form for versatile turning operations FAQ What materials is this insert suitable for? The CNMG160616-RP7 WPP20G insert is specified for the ISO P group, meaning it is suitable for steel machining such as unalloyed and alloyed steels. How does the Tiger·tec Gold coating help performance? Tiger·tec Gold coating on the WPP20G grade increases wear resistance and edge stability, which helps the insert maintain cutting performance and surface finish for longer periods. What does RP7 chipbreaker provide in practice? The RP7 chipbreaker promotes controlled chip formation and evacuation during turning of steel, reducing chip-related interruptions and contributing to steadier machining cycles. Is this insert suitable for interrupted cuts or heavy cuts? The negative 0° geometry and robust corner radius make the insert appropriate for demanding conditions such as interrupted cuts or deeper depths of cut in steel applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only; there is no connection between our company and the named brands. The offered article is original factory-new goods of the manufacturer.
CNMG160616-RP7 WPP30G Wendeplatten - Walter Tools
Benefit from the pairing of Tiger·tec Gold coating and the RP7 chipbreaker for stable, productive turning in steel; this combination yields reliable tool life and consistent surface quality. Order directly via Metav Werkzeuge or consult their specialists for process-matched recommendations. CNMG160616-RP7 WPP30G indexable turning insert — Tiger·tec Gold, for steel (Walter Tools) The CNMG160616-RP7 WPP30G is a rhombic 80° coated carbide insert designed for productive steel turning with optimised chip control and robust performance. Tiger·tec Gold coating for long tool life Optimised RP7 chipbreaker for steel turning Rhombic 80° insert with 1.6 mm corner radius Robust coated carbide for consistent surface finish Extended tool life through advanced coating and grade The combination of the Tiger·tec Gold technology and the WPP30G grade provides a coated carbide substrate engineered for the thermal and mechanical demands of steel machining. This results in predictable tool life and reduced flank wear during medium- to high-duty cuts. For workshops seeking fewer insert changes and steady batch throughput, the coated grade reduces downtime and supports longer uninterrupted production runs while maintaining dimensional stability. Controlled chip formation for smoother machining cycles Equipped with the RP7 chipbreaker, the insert promotes consistent chip control during turning of steel grades, which decreases the risk of chip entanglement and machine interruptions. The 80° rhombic geometry and 1.6 mm corner radius allow stable edge engagement and favourable cutting forces, supporting good surface finish and process security. As a result, cycle times can be optimised and the number of secondary operations minimised, delivering a tangible efficiency gain on the shop floor. Application range and process reliability in daily use Specified for the material group P (steel) and produced to tolerance class M, the insert suits general-purpose and slightly demanding turning tasks where a balance of wear resistance and toughness is required. Its execution with a 0° negative relief angle supports robust seating in toolholders and reliable indexability. In practice, this leads to straightforward handling during tool changes and repeatable performance across runs, making the grade well suited for batch production and mixed-series machining. For tailored application advice or to secure Walter Tools Tiger·tec Gold inserts for steel turning, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CNMG160616-RP7-WPP30G-WALTER Label: Drehwendeschneidplatte CNMG160616-RP7 WPP30G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP30G Chipbreaker: RP7 Geometry: Rhombus 80° Relief angle: 0° (negativ) Facts Size: 16 Thickness: 06 Corner radius: 1,6 Tolerance class: M Special features Coated carbide grade Optimised for steel (P) Robust chip control Suitable for productive turning tasks FAQ What materials is the CNMG160616-RP7 WPP30G intended for? The CNMG160616-RP7 WPP30G from Walter Tools is designed primarily for steel (ISO group P) and is processed to handle the heat and chip formation typical of steel turning. How does the RP7 chipbreaker affect machining? The RP7 chipbreaker on this insert improves chip control during steel turning, promoting shorter, controllable chips and reducing the likelihood of machine stoppages caused by long swarf. What are the key geometric features of the insert? This rhombic 80° insert features a 1.6 mm corner radius and a 0° negative relief angle, providing a stable cutting edge for robust turning applications. Is the insert coated and which benefit does the coating provide? Yes, the insert uses the Tiger·tec Gold coating technology (grade WPP30G), which offers enhanced wear resistance and thermal stability for longer tool life in steel machining. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand name: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners and are mentioned solely for explanatory purposes. There is no affiliation between our company and the named manufacturers; the offered article is an original, factory-new product of the manufacturer.
CNMG160624-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the WPP10G carbide grade for reliable, productive turning of steel; the RP5 chipbreaker and rhombic 80° geometry deliver consistent chip control and edge life. Order the CNMG160624-RP5 WPP10G insert directly via Metav Werkzeuge or consult our specialists for application support. CNMG160624-RP5 WPP10G — indexable turning insert, Tiger·tec Gold, Walter Tools The CNMG160624-RP5 WPP10G is an indexable turning insert designed for general steel turning applications, combining a robust coated carbide grade with an RP5 chipbreaker and rhombic 80° geometry. Tiger·tec Gold coating for extended life Coated carbide grade WPP10G for steel RP5 chipbreaker for consistent chip control Rhombic 80° with 2.4 mm nose radius High process stability and cost-efficiency for steel machining The combination of Tiger·tec Gold coating and the WPP10G grade ensures high wear resistance and stable edge behaviour when machining steels (ISO group P). This engineered coating reduces flank wear and thermal impact during continuous and interrupted cuts, which leads to longer tool life and lower throughput costs per component. The rhombic 80° form and the insert’s geometry support adaptable cutting conditions in turning operations, enabling shops to maintain productivity without frequent index changes or regrinds. Predictable chip control and improved surface quality The RP5 chipbreaker is tuned for consistent chip formation in a broad range of steels, improving evacuation and reducing the risk of built-up edge. Better chip control contributes directly to a steady surface finish and fewer secondary operations. For machinists less familiar with chipbreaker functions: the RP5 geometry channels the swarf and maintains a regular chip shape at common cutting speeds, which simplifies process set-up and reduces downtime arising from poor evacuation. Geometry and mounting that simplify workshop integration With a 2.4 mm corner radius, a rhombic 80° outline and a negative 0° rake, this insert is suitable for medium-duty turning and finishing passes where robustness and repeatability matter. The thickness and size correspond to conventional CNMG standards, allowing straightforward fitting into existing toolholders. The insert’s tolerance class M supports consistent seating and repeatable results in batch production, making it practical for both jobbing shops and series production environments. Contact Metav Werkzeuge for tailored application advice on the Walter Tools CNMG160624-RP5 WPP10G insert — call +49 2822 7131930 or eMail info@metav-werkzeuge.com to verify suitability and availability Technical Data SKU: CNMG160624-RP5-WPP10G-WALTER Article: Drehwendeschneidplatte CNMG160624-RP5 WPP10G Walter Tools Product type: indexable turning insert Manufacturer: Walter Tools Core specifications Insert size: 16 mm Thickness: 6 mm Corner (nose) radius: 2.4 mm Geometry: rhombic 80° Free (rake) angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: RP5 ISO designation: CNMG160624-RP5 WPP10G Material application: steel (ISO P) Series: Tiger-tec Gold FAQ What materials is this insert best suited for? The CNMG160624-RP5 WPP10G insert is optimised for machining steels (ISO group P) thanks to the WPP10G grade and Tiger·tec Gold coating. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on the Walter Tools insert stabilises chip formation and evacuation, which supports consistent surface quality and reduces the risk of chip-related interruptions. Can this insert be used for finishing passes? Yes, the rhombic 80° geometry with a 2.4 mm corner radius allows for medium to fine finishing when set up with appropriate feeds and speeds. Is the CNMG geometry compatible with standard holders? The CNMG160624-RP5 conforms to common CNMG dimensions and fits conventional CNMG toolholders, enabling easy integration into existing setups. What advantages does Tiger·tec Gold offer compared with standard coatings? Tiger·tec Gold enhances wear resistance and thermal stability for the coated carbide grade, resulting in improved edge life and process reliability in steel turning. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer Walter Tools.
CNMG160624-RP5 WPP20G G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating and the WPP20G grade for consistent, high-throughput turning of steel; the optimised RP5 chipbreaker and Rhombic 80° geometry ensure reliable chip control and repeatable component quality. Order directly via Metav Werkzeuge or contact our consultants for application-specific recommendations. CNMG160624-RP5 WPP20G turning insert for steel — Tiger·tec Gold, Walter Tools CNMG160624-RP5 WPP20G is an indexable turning insert designed for precision machining of steel components in CNC turning applications Tiger·tec Gold coating, grade WPP20G Optimised RP5 chipbreaker for stable chips Rhombic 80° geometry with 2.4 mm radius Designed for machining steel (ISO P) High-performance coating for longer production runs The Tiger·tec Gold coating combined with the WPP20G hardmetal grade provides improved wear resistance and thermal stability during continuous turning of steels. This combination reduces flank wear and maintains cutting-edge integrity over extended cycles, which translates into fewer tool changes and a steadier production flow. For shops processing batches of turned parts, the result is predictable tool life and reduced process interruptions. Stable chip control and process security Equipped with the RP5 chipbreaker, the insert promotes coherent chip formation and evacuation, lowering the risk of built-up edge and machine stoppages. Stable chips improve surface finish and allow consistent cutting parameters, which supports higher spindle speeds and feeds where appropriate. This contributes directly to increased throughput without compromising component quality, making the insert suitable for both semi-finish and productive finishing passes. Geometry engineered for accuracy and repeatability The Rhombic 80° form with a 2.4 mm corner radius and a 0° (negative) rake description yields a robust cutting edge able to withstand interrupted cuts and variable material batches. The geometry supports dimensional stability and repeatable part profiles, helping to meet tight tolerances on turned features. The M tolerance classification ensures consistent fit and seating in standard tool holders, supporting efficient tool-change routines. Efficient choice for steel-focused turning shops As a cost-effective option within the Tiger·tec Gold series, this insert is tailored for operations with a focus on steel (ISO P) machining. The balance of toughness and wear resistance in the grade aids in handling a wide range of steel alloys commonly encountered in production and maintenance work. For smaller subcontractors and larger manufacturing cells alike, the insert delivers measurable improvements in cycle consistency and overall process economy. Contact Metav Werkzeuge for tailored Walter Tools recommendations and to discuss optimal cutting data for this CNMG160624-RP5 WPP20G turning insert Technical data Article number / SKU: CNMG160624-RP5-WPP20G-WALTER Product type: Indexable turning insert (turning insert) Label: Drehwendeschneidplatte CNMG160624-RP5 WPP20G Walter Tools Numbers / core technical data Insert size: 16 mm Corner radius: 2.4 mm Thickness designation: 06 Rake angle: 0° (negative) Tolerance class: M Designs / special features Coating / series: Tiger·tec Gold Grade: WPP20G Chipbreaker: RP5 Geometry: Rhombic 80° Material suitability: Steel (ISO P) Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The CNMG160624-RP5 WPP20G insert is designed primarily for machining steel (ISO P); the Walter Tools grade WPP20G is optimised for the heat and chip behaviour typical of steel turning. How does the RP5 chipbreaker affect performance? The RP5 chipbreaker on this Walter Tools insert produces consistent chip forms that ease evacuation and reduce the likelihood of built-up edge, improving surface finish and process stability. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold increases wear resistance and thermal stability, helping the insert maintain a sharp cutting edge during extended production runs and reducing frequency of tool changes. Is the insert suitable for interrupted cuts? Yes, the rhombic 80° geometry and the 2.4 mm corner radius deliver a robust edge that improves resistance to shock and supports interrupted cutting conditions when machining steel. Which tolerance and seating standard does the insert comply with? The insert is supplied with an M tolerance class, ensuring consistent seating in compatible tool holders for repeatable positioning and reliable tool change operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG190608-NRS WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating for extended tool life and the NRS chipbreaker for reliable chip control, ensuring productive machining of stainless steels and heat‑resistant alloys; order directly via Metav Werkzeuge or contact our consultants for application advice. CNMG190608-NRS WSM10S — Indexable turning insert for stainless steels, Tiger·tec Silver, Walter Tools CNMG190608-NRS WSM10S is a coated indexable turning insert designed for heavy‑duty and demanding machining tasks on stainless steel and heat‑resistant superalloys, offering robust edge stability and consistent chip formation Tiger·tec Silver coated carbide NRS chipbreaker for controlled chips For stainless steel and superalloys 0° negative rake, 0.8 mm corner radius Improved productivity through robust grade and coating The coated carbide grade WSM10S, featuring Tiger·tec Silver technology, is engineered for machining materials that challenge conventional grades. The advanced coating increases thermal resistance and reduces adhesion, which translates into longer tool life and fewer index changes during production. In practice, this means fewer interruptions on the shop floor and a steadier output when turning stainless steels and high‑temperature alloys. Reliable chip control and surface quality with tailored geometry The NRS chipbreaker combined with the CNMG rhombic 80° geometry promotes predictable chip formation and smooth evacuation, reducing the risk of chip entanglement. The 0.8 mm corner radius balances edge strength and surface finish, allowing stable roughing cuts as well as acceptable finishing passes with the correct cutting data. Operators see a tangible benefit in consistent surface quality and reduced secondary operations. Process security and economical machining strategy A negative rake of 0° increases the insert’s edge stability under heavy loads, helping to resist chipping when cutting tough, work‑hardening materials. The plate’s design supports machining strategies that favour controlled feed and moderate depth of cut, which, combined with the grade’s wear characteristics, often results in predictable tool life and lower unit costs. For production environments where reproducibility matters, this insert helps maintain consistent part quality across shifts. Contact Metav Werkzeuge to discuss machining recommendations for Walter Tools’ CNMG190608-NRS WSM10S or to request cutting data and application support from our consultants Technical data Article number / SKU: CNMG190608-NRS-WSM10S-WALTER Product type: Indexable turning insert Brand: Walter Tools Series: Tiger·tec Silver Grade: WSM10S Designation: CNMG190608-NRS WSM10S Facts Insert size: 19 Thickness code: 06 Corner radius: 0.8 mm Relief angle: 0° (negative) Shape: Rhombus 80° Chipbreaker: NRS Tolerance class: M Execution code: G Special features Coating: Tiger·tec Silver Material compatibility: stainless steel (M), superalloys / titanium (S) Material group: coated cemented carbide Typical applications: heavy‑duty turning, applications prone to built‑up edge FAQ What materials is this insert suitable for? This indexable insert is specified for stainless steel and high‑temperature superalloys; the WSM10S grade supports secure chip formation and edge stability in these materials. How does the NRS chipbreaker affect machining? The NRS chipbreaker on the CNMG190608‑NRS promotes controlled chips and helps prevent chip snarling, improving process security and surface quality during continuous turning. Can this insert be used for both roughing and finishing? With its 0.8 mm corner radius and robust grade, the insert can be used for productive roughing and medium finishing operations when paired with appropriate cutting data. Is the Tiger·tec Silver coating beneficial for heat resistance? Yes, the Tiger·tec Silver coating improves thermal resistance and reduces adhesion, which is particularly advantageous when machining heat‑resistant alloys and stainless steels. What is the significance of the 0° negative rake? A 0° negative rake enhances edge strength and resistance to chipping under heavy cutting forces, making the insert suitable for demanding turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
CNMG190608-NRS WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a robust NRS chipbreaker and the rhombic 80° geometry for stable machining of high‑alloy and rostfreier Stahl workpieces; order directly via Metav Werkzeuge or consult the technical team for application support. CNMG190608-NRS WSM20S indexable turning insert – Tiger·tec Silver, 0.8 mm radius, Walter Tools A CNMG190608-NRS WSM20S indexable turning insert engineered for demanding turning of rostfreier Stahl and heat‑resistant alloys, delivering durable edge stability and predictable chip control Tiger·tec Silver coating for high thermal resistance NRS chipbreaker for consistent chip formation Suitable for rostfreier Stahl and superalloys Rhombic 80° geometry for versatile turning 0.8 mm corner radius for durable cutting edge Reliable edge life for demanding materials The combination of the Tiger·tec Silver coated carbide grade and the designed chipformer ensures a high degree of resistance to heat and abrasion when cutting challenging materials. This insert is optimised for machining rostfreier Stahl and heat‑resistant superalloys, where high temperatures and workhardening demand a stable cutting edge. The coating reduces flank wear and supports consistent tool life, which in turn improves process predictability and reduces unplanned stoppages. Operators and production planners benefit from fewer insert changes and a steady workpiece quality under tough cutting conditions. Stable chip control and geometry that aids productivity The NRS chipbreaker together with the rhombic 80° shape and a 0° negative rake angle creates a cutting geometry that promotes secure chip breaking and controlled evacuation. The 0.8 mm corner radius balances edge strength with the ability to achieve acceptable surface finish on interrupted and continuous cuts. These geometric traits help maintain cutting forces within expected ranges and simplify parameter selection for a broad spectrum of turning operations. For applications where consistent chip form and reliable surface quality are required, this geometry reduces the need for conservative feeds and allows higher material removal rates. Process security and handling advantages for workshop routines Designed for repeatable mounting in standard toolholders, the insert supports efficient indexable‑insert workflows and reduces cycle variability. The robust edge preparation and coating combination improves resistance to built‑up edge and thermal load, yielding longer intervals between changes and lower tooling expenditure per part. In addition, the insert’s compatibility with materials classified under ISO groups M and S offers versatility across rostfreier Stahl and high‑temperature alloys, making it suitable for component families where mixed material batches occur. For engineering teams aiming to increase throughput without sacrificing component integrity, the insert supports predictable, high‑quality outputs. For reliable machining of rostfreier Stahl and superalloys, contact Metav Werkzeuge to discuss specification and application of Walter Tools Tiger·tec Silver inserts and to arrange tailored process advice. Technical data Article number: CNMG190608-NRS-WSM20S-WALTER Designation: CNMG190608-NRS WSM20S Product type: Drehwendeschneidplatte (indexable turning insert) Series: Tiger·tec Silver Manufacturer: Walter Tools Core data Plate size: 19 Thickness: 06 Corner radius: 0.8 mm Relief / rake: 0° (negativ) Special features Coating: Tiger·tec Silver Chipbreaker: NRS Geometry: Rhombus 80° Grade / sort: WSM20S Material suitability: S / M Tolerance class: M FAQ What materials is this insert suitable for? The CNMG190608-NRS WSM20S from Walter Tools is formulated for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), supporting secure chip formation and edge stability in these materials. How does the NRS chipbreaker affect machining? The NRS chipbreaker on this insert promotes consistent chip segmentation and evacuation, which improves process reliability and reduces the risk of chip-related interruptions when turning demanding alloys. What are the practical benefits of the rhombic 80° geometry? Rhombic 80° geometry provides versatility for a wide range of turning operations, offering favourable cutting angles for both general turning and finishing while enabling a compact insert profile for confined tool setups. Is the insert compatible with standard toolholders and indexable workflows? Yes, the CNMG190608-NRS WSM20S is designed for standard indexable turning toolholders and supports fast indexing and repeatable clamping for efficient workshop routines. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected brand names and trademarks are the property of their respective owners. Brand names are used here for explanatory purposes only. The offered item is an original, factory‑new product of the manufacturer.
CNMG190608-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance and the RP5 chipbreaker for consistent turning performance and reliable chip control; the geometry and 0° negative rake support heavy cuts and long tool life. Order the CNMG190608‑RP5 WPP10G indexable turning insert directly via Metav Werkzeuge or contact our consultants for application advice. CNMG190608‑RP5 WPP10G indexable turning insert — Tiger‑tec Gold, RP5 (Walter Tools) A CNMG190608‑RP5 WPP10G indexable turning insert engineered for ISO P steels, offering coated‑carbide durability and precision for productive turning operations CNMG 19 insert for robust turning Tiger‑tec Gold coated carbide RP5 chipbreaker for stable chips Negative rake 0° for heavy cuts Increased productivity through advanced coating technology The combination of the Tiger‑tec Gold coating and the WPP10G grade provides enhanced wear resistance and repeatable edge performance under typical turning loads for steels. This coated carbide formulation is optimised for the heat and chip formation common to ISO P materials, which translates into longer tool life and fewer insert changes per shift. The result is measurable efficiency gains in batch production and reduced downtime for retooling, supporting consistent cycle times and stable machining processes. Consistent chip control and superior surface finish The RP5 chipbreaker is designed to produce predictable chip forms at common turning feeds and depths, reducing the risk of chip entanglement and secondary finishing work. Combined with the rhombus 80° geometry and the 0° negative rake configuration, this insert delivers both rigidity and controlled engagement for demanding passes. The 0.8 mm corner radius offers a balance between edge strength and surface quality, making the insert suitable for finishing and light roughing where a reliable surface is required. Versatile application for steels (ISO P) and secure fitment This insert is tailored for the ISO P material group, covering unalloyed and alloyed steel grades with predictable thermal and chip‑forming behaviour. The 19 mm inscribed circle size and a plate thickness of 06 ensure compatibility with common CNMG toolholders, while the tolerance class M supports interchangeability and secure clamping. These characteristics simplify tool selection and reduce set‑up variability across turning centres, improving process repeatability. Practical integration in production environments The insert’s design supports heavy interrupted cuts and stable machining strategies thanks to its geometry and robust coated substrate. Its combination of chip control, edge strength and standard dimensions makes it suitable for mixed production lines where flexibility and uptime matter. For specific machining parameters, tooling layouts or to confirm holder compatibility, technical consultation is available to ensure the insert meets the intended production goals. Contact Metav Werkzeuge for tailored cutting data, holder compatibility checks and procurement support for Walter Tools Tiger‑tec Gold inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CNMG190608-RP5-WPP10G-WALTER Designation: CNMG190608-RP5 Brand: Walter Tools Product type: Drehwendeschneidplatte Facts Inscribed circle: 19 mm Plate thickness: 06 Corner radius: 0.8 mm Rake angle: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP10G Chipbreaker: RP5 Coating: coated carbide Shape: Rhombus 80° Material group: P (ISO P — steel) Execution: G FAQ Which materials is this insert suitable for? This CNMG190608‑RP5 WPP10G insert from Walter Tools is designed primarily for ISO P materials and is suitable for machining unalloyed and alloyed steels. What benefits does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WPP10G grade increases wear resistance and edge life, helping to maintain consistent cutting performance across extended production runs. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker promotes reliable chip formation and evacuation under typical turning feeds, which reduces entanglement and improves process stability. Is the insert compatible with standard CNMG toolholders? The 19 mm inscribed circle and 06 thickness align with common CNMG toolholder standards; checking holder specifications for clamping compatibility is recommended. What cutting strategies suit this insert best? Use the insert for medium to heavy turning operations in steels where a combination of edge strength and chip control is required; for specific speeds and feeds contact Metav Werkzeuge for tailored guidance. Protected trademarks and product names are mentioned for explanatory purposes only; there is no affiliation between Metav Werkzeuge and the trademark owners. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CNMG190608-RP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the RP5 chipbreaker for reliable chip control and extended tool life; combine robust edge stability with universal suitability for steel to maintain consistent production output — order or discuss application details via Metav Werkzeuge. CNMG190608-RP5 WPP20G indexable turning insert — Tiger·tec Gold, Walter Tools The CNMG190608-RP5 WPP20G is a rhombic 80° indexable turning insert designed for general steel turning applications, offering a coated-carbide grade optimised for stable chip formation and reproducible performance Tiger·tec Gold coating for long tool life RP5 chipbreaker for controlled chips 0.8 mm corner for robust edge strength Universal grade for steel (ISO group P) Increased process reliability through coated-carbide technology The Tiger·tec Gold coating and the WPP20G grade combine to deliver coated carbide properties that reduce flank wear and improve resistance to thermal loads during steel turning. This translates into fewer tool changes and more predictable cycle times, supporting higher overall equipment effectiveness. The insert’s negative 0° relief promotes a sturdy cutting edge for interrupted cuts and roughing operations, while the RP5 chipbreaker helps to guide and break chips reliably, reducing rework or downtime caused by tangled swarf. Consistent edge strength and surface quality for production runs With a 0.8 mm corner radius and a Rhombus 80° geometry, the insert offers a balance between edge robustness and acceptable surface finish. The nominal size designation and thickness ensure mechanical stability in standard toolholders, so the cutting edge remains repeatable across tool changes. For workshop managers seeking predictable component quality, this combination reduces scrap rates and supports consistent surface tolerances when machining a wide range of steels designated under ISO group P. Practical machining advantages and applicability The CNMG190608-RP5 WPP20G is intended for universal steel machining tasks, from medium roughing to finishing passes where a durable, coated-carbide grade is required. The insert’s design simplifies process planning: the Tiger·tec Gold technology provides a good compromise between wear resistance and toughness, while the RP5 geometry aids chip control without necessitating elaborate coolant strategies. This makes the insert suitable for batch production and flexible to the needs of job-shop and in-house machining environments. Contact Metav Werkzeuge for tailored cutting data, application advice and availability of the Walter Tools CNMG190608-RP5 WPP20G at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CNMG190608-RP5-WPP20G-WALTER Designation: CNMG190608-RP5 WPP20G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP20G Core data Inscribed circle / size: 19 mm Thickness: 06 Corner radius: 0.8 mm Relief / rake: 0° (negative) Geometry: Rhombus 80° Tolerance class: M Special features Coated carbide grade (beschichtetes Hartmetall) Chipbreaker: RP5 Material application: Steel (ISO group P) Execution: G FAQ What materials is this insert suitable for? The CNMG190608-RP5 WPP20G is formulated for machining steels classified under ISO group P and is optimised for the typical heat and chip-formation behaviour of these materials. How does the RP5 chipbreaker benefit production? The RP5 chipbreaker on the CNMG190608-RP5 WPP20G promotes controlled chip segmentation, reducing entanglement and improving swarf evacuation in continuous and interrupted steel turning. What is the advantage of the Tiger·tec Gold technology? Tiger·tec Gold coating on the WPP20G grade improves wear resistance and thermal stability, resulting in longer tool life and more consistent process windows when turning steel. Is the negative 0° relief suitable for interrupted cuts? Yes; the 0° (negative) relief and the insert’s robust edge geometry provide higher edge strength, making it well suited for interrupted cuts and tougher machining conditions. Which corner radius is best for roughing with this insert? The 0.8 mm corner radius of this insert balances edge strength and surface finish, making it a practical choice for medium roughing where durability is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names are used for explanation only. The offered item is original, factory-new merchandise from the manufacturer.
CNMG190608-RP5 WPP30G WPP30G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating and the RP5 chipbreaker for productive, stable turning of steel; the coated carbide grade WPP30G offers improved wear resistance and consistent edge stability — order the inserts directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CNMG190608-RP5 WPP30G — Turning insert for steel (Tiger·tec Gold) · Walter Tools CNMG190608-RP5 WPP30G is a precision indexable turning insert designed for efficient machining of steel components in production and workshop environments Tiger·tec Gold coating for high productivity Coated carbide grade WPP30G Rhombic 80° geometry, negative 0° rake RP5 chipbreaker for stable chip control Longer tool life through advanced coating technology The Tiger·tec Gold coating combined with the WPP30G grade delivers notably improved wear resistance and thermal stability compared with uncoated grades. Coated carbide inserts are engineered to withstand the typical heat and chip formation encountered when machining steels, so the machining process becomes more predictable. The result is reduced downtime for tool changes and a more consistent component quality over longer cutting intervals. For buyers seeking to raise throughput without sacrificing repeatability, this coated grade represents a cost‑effective choice that supports higher process reliability. Geometry and chip control that stabilise turning operations The rhombic 80° insert form and a 0.8 mm corner radius offer a balanced combination of strength and accessibility into tighter geometries, while the negative 0° rake increases edge robustness for interrupted cuts and heavier feed rates. The RP5 chipbreaker is optimised to shape and evacuate chips reliably during steel turning, reducing risk of built-up edge and improving surface finish. In practice, this means fewer surface defects and more predictable cycle times, especially in series production where consistent chip behaviour is critical for downstream handling and inspection. Ready for steel applications and easy process integration Classified for ISO group P (steel), this insert is intended for a wide range of unalloyed and alloyed steels. The coated carbide construction suits tasks from productive roughing through to medium finishing, delivering repeatable dimensional results and good edge life. Integration into existing toolholders is straightforward thanks to the standard CNMG format, and the insert’s RP5 chip control reduces the need for frequent cutting parameter fine‑tuning. If there is any uncertainty about cutting data or compatibility with a specific turning holder, technical advice is available — contact info@metav-werkzeuge.com or call +49 2822 7131930 for machining recommendations and cutting‑speed guidance. Contact Metav Werkzeuge for application advice and to request CNMG190608-RP5 WPP30G Tiger·tec Gold turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: CNMG190608-RP5-WPP30G-WALTER Article designation: CNMG190608-RP5 Product type: Turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP30G Execution: G Facts Insert size: 19 Thickness: 06 Corner radius: 0.8 mm Relief angle: 0° (negative) Geometry: Rhombic 80° Tolerance class: M Special features Coating: Tiger·tec Gold Substrate/material: Coated carbide Chipbreaker: RP5 Application group: P (steel) Suitable for: Unalloyed and alloyed steels FAQ What steels are suitable for this insert? The CNMG190608-RP5 WPP30G turning insert (Walter Tools) is specified for ISO group P, covering unalloyed and alloyed steels typically encountered in general turning operations. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WPP30G grade increases wear resistance and thermal stability, which extends tool life and contributes to consistent edge behaviour when machining steel. Which chip behaviour can be expected with the RP5 breaker? The RP5 chipbreaker on this indexable insert promotes controlled chip formation and evacuation, reducing the likelihood of built‑up edge and supporting better surface finish during continuous turning. Is the CNMG190608-RP5 compatible with standard CNMG toolholders? Yes, the CNMG190608-RP5 conforms to the CNMG format and is compatible with standard CNMG toolholders commonly used in turning applications. Can this insert be used for finishing? The coated carbide WPP30G grade is suited for productive roughing and medium finishing in steels; for fine finishing, parameter optimisation and the appropriate nose radius should be selected. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are used solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
CNMG190612-MK5 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKK10S grade to achieve stable, economical machining of cast iron; the rhombic 80° geometry with a 1.2 mm corner radius and MK5 chipbreaker ensure predictable chip control and extended service life. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. CNMG190612-MK5 WKK10S — Indexable turning insert (rhombic 80°, 0° negative) by Walter Tools The CNMG190612-MK5 WKK10S is an indexable turning insert designed for productive, wear-resistant machining of cast iron components in industrial turning applications. Tiger·tec Silver coating for wear resistance Optimised for abrasive cast-iron machining Rhombic 80° shape with 1.2 mm corner MK5 chipbreaker for stable chips Increased productivity for cast-iron turning The combination of the Tiger·tec Silver coating and the WKK10S carbide grade is tuned to resist the abrasive wear characteristic of cast iron. This insert turns short, brittle chips reliably due to its geometry and coating, which translates into longer tool life and fewer tool changes. The 0° negative relief angle provides a robust cutting edge under interrupted cuts and heavy engagement, improving process stability and helping to maintain cycle times in series production. Predictable chip control and edge stability Built around the MK5 chipbreaker and a rhombic 80° form, the insert delivers consistent chip control for varying depths of cut, reducing the risk of chip build-up and machine stoppages. The 1.2 mm corner radius adds edge strength, permitting higher feed rates where component tolerances allow. Together these features provide a balance between surface finish and durability, enabling steady, repeatable results on demanding cast-iron workpieces. Easy integration into standard toolholders and workshops The ISO designation CNMG indicates compatibility with common turning toolholders, simplifying inventory and changeover. With an inscribed circle of 19 mm and a thickness designation of 06, the insert fits established tool systems and replacement procedures. The tolerance class M supports consistent manufacturing quality, while the ISO material group K confirms the insert’s suitability for cast iron. This predictability reduces setup time and supports leaner production workflows. For high-wear cast-iron turning tasks, specify the Walter Tools CNMG190612-MK5 WKK10S and contact Metav Werkzeuge for tailored advice and rapid supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: CNMG190612-MK5-WKK10S-WALTER Designation: CNMG190612-MK5 WKK10S Manufacturer: Walter Tools Series: Tiger-tec Silver Key Dimensions and Specs Inscribed circle: 19 mm Thickness: 06 Corner radius: 1.2 mm Relief angle: 0° (negative) Shape: Rhombic 80° Materials, Coating and Applications Grade: WKK10S Coating: Tiger·tec Silver Chipbreaker: MK5 Tolerance class: M Applicable material group: Cast iron (ISO K) FAQ What materials is this insert suitable for? The CNMG190612-MK5 WKK10S is designed primarily for cast iron (ISO group K); the WKK10S grade and Tiger·tec Silver coating are optimised for abrasive grey and compacted graphite irons. How does the MK5 chipbreaker affect machining? The MK5 chipbreaker on this Walter Tools insert promotes short, controlled chips during turning, improving machining reliability and reducing the likelihood of chip-related interruptions. What does the 0° negative relief angle mean in practice? A 0° (negative) relief angle gives a robust cutting edge that tolerates heavier cuts and interrupted machining, enhancing edge stability and tool life in demanding cast-iron operations. Is the insert compatible with standard CNMG toolholders? Yes, the CNMG190612-MK5 form conforms to the CNMG ISO designation and fits conventional CNMG toolholders, simplifying insert changes and tooling logistics. What benefits does the Tiger·tec Silver coating provide? Tiger·tec Silver improves wear resistance and thermal stability, extending edge life on abrasive cast-iron materials and contributing to more consistent production results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
CNMG190612-MK5 WKK20S Wendeplatten - Walter Tools
Take advantage of a specialist grade that combines Tiger·tec Silver coating and the WKK20S substrate for dependable, high‑productivity cast‑iron turning; the robust MK5 chipbreaker and rhombic 80° geometry deliver controlled chips and strong cutting edges for consistent production. Order directly via Metav Werkzeuge or contact the consultants for technical clarification. CNMG190612-MK5 WKK20S turning insert — Tiger·tec Silver, for cast iron by Walter Tools The CNMG190612-MK5 WKK20S is a rhombic 80° turning insert optimised for ISO K (cast iron) applications, offering a coated‑carbide grade tailored to abrasive cast‑iron conditions. Tiger·tec Silver coated carbide WKK20S Designed for cast iron machining (ISO K) Rhombic 80° insert with 1.2 mm corner radius Negative 0° clearance with MK5 chipbreaker Reliable cut performance for abrasive cast‑iron work The combination of WKK20S substrate and Tiger·tec Silver coating creates a coated carbide solution that is engineered for the abrasive nature of cast iron. The formulation balances hardness and toughness so that abrasive wear is resisted while the cutting edge retains strength during interrupted cuts. In practice this means longer edge life and fewer insert changes, improving uptime in medium to high‑volume turning operations. The description above refers specifically to cast‑iron turning (ISO group K) and the grade’s resistance to short, brittle chip formation. Geometry and chip control for consistent surface quality The insert’s rhombic 80° form and 1.2 mm corner radius combine to provide a stable cutting engagement and predictable strength at the nose of the tool. The MK5 chipbreaker is designed to produce short, manageable chips on cast‑iron grades, reducing the risk of chip entanglement and promoting safe, repeatable machining. The negative geometry (0° clearance) increases edge robustness for demanding applications and interrupted cuts. Dimensional cues such as the 19 mm inscribed circle and thickness code 06, together with tolerance class M, support accurate seating and repeatable tool offsets in indexable toolholders. Productivity advantages and process reliability By choosing this turning insert, shops gain a practical balance between wear resistance and toughness that supports steady throughput and predictable tool change intervals. The coated grade helps maintain surface finish under typical cast‑iron feed rates while the insert shape and chip control reduce downtime associated with poor chip evacuation. For production environments requiring consistent parts per shift, the insert’s characteristics translate into measurable process security and fewer unplanned interventions. For availability or tailored recommendations on Walter Tools Tiger·tec Silver turning solutions, contact Metav Werkzeuge for expert advice at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable grades and insert geometries Technical Data Article designation: CNMG190612-MK5 WKK20S SKU: CNMG190612-MK5-WKK20S-WALTER Product type: Turning insert (indexable) Facts Inscribed circle: 19 mm Corner radius: 1.2 mm Free/clearance angle: 0° (negative) Thickness code: 06 Tolerance class: M Special features Coating: Tiger·tec Silver (coated carbide) Grade: WKK20S Chipbreaker: MK5 Insert shape: Rhombus 80° Application group: ISO K (cast iron) Execution: G (negative geometry) Suitable for cast iron machining FAQ What materials is this insert intended for? This insert is designed for cast‑iron workpieces and the WKK20S grade with Tiger·tec Silver coating is optimised for ISO group K materials. How does the MK5 chipbreaker benefit machining? The MK5 chipbreaker shapes short, controllable chips on cast iron, improving evacuation and reducing the risk of chip-related interruptions during turning. What does the 0° free angle mean for performance? A 0° (negative) clearance increases edge strength and makes the insert more tolerant of interrupted cuts, supporting robust performance under heavy engagement. Can this insert be used in interrupted cutting or roughing operations? Yes—thanks to its negative geometry and robust corner radius, this insert is suitable for more demanding turning tasks, including interrupted cuts common in roughing. What are the dimensional identifiers to check before mounting? Refer to the article designation CNMG190612-MK5 WKK20S and check the inscribed circle 19 mm, thickness code 06 and the 1.2 mm corner radius to ensure correct seating in the toolholder. The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking. Protected trademarks and brand names remain the property of their respective owners. Mention of trade names serves explanatory purposes only; there is no affiliation between our company and the named manufacturers. The offered article is original and brand‑new. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CNMG190612-MS3 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the WSM01 grade and Tiger-tec Silver series for consistent performance when turning stainless steels and heat‑resistant alloys; the MS3 chipbreaker stabilises chip flow while the 1.2 mm corner radius extends edge life, enabling reliable, productive machining — order directly via Metav Werkzeuge or consult the technical team for application-specific advice. CNMG190612-MS3 WSM01 — Rhombic 80° indexable insert by Walter Tools (Tiger‑tec Silver) The CNMG190612-MS3 WSM01 is a rhombic 80° turning insert designed for reliable cutting performance in stainless steels and heat‑resistant superalloys, combining a coated‑carbide grade with a robust chipbreaker. Tiger‑tec Silver coating for extended tool life WSM01 grade optimised for stainless and superalloys MS3 chipbreaker for stable chip control Rhombic 80° geometry with 1.2 mm corner radius Consistent performance in difficult‑to‑machine materials The combination of the Tiger‑tec Silver series and the WSM01 coated carbide grade delivers enhanced wear resistance and consistent edge behaviour when facing the thermal and mechanical challenges of stainless steels and heat‑resistant superalloys. The coating reduces flank wear and supports repeatable cutting conditions, which translates directly into longer tool life and fewer insert changes on the shop floor. For production environments where downtime must be minimised, this results in measurable gains in machine availability and process throughput. Stable chip control for safer turning operations Equipped with the MS3 chipbreaker, the insert ensures predictable chip formation and evacuation during turning. Stable chips reduce tool nose contact and secondary damage to the workpiece, improving surface integrity and lowering the risk of built‑up edge. The rhombic 80° shape and 1.2 mm corner radius balance strength and edge sharpness, permitting secure entry into interrupted cuts and maintaining dimensional stability across longer runs. Geometry and mounting that support machining efficiency The negative 0° clearance geometry contributes to a rigid cutting interface and robust cutting edge support, which is particularly beneficial when machining tough, sticky materials that tend to work‑harden. The standard CNMG format offers broad compatibility with common toolholders, simplifying inventory and changeover. Together, these design choices improve process reliability, reduce vibration sensitivity and support consistent surface finish quality in series production. Application guidance and expected benefits As a coated, high‑performance turning insert from Walter Tools’ Tiger‑tec Silver family, this grade is intended for operations where thermal load and edge stability are critical. The insert is particularly suited to machining stainless steels (ISO group M) and heat‑resistant alloys or titanium (ISO group S), offering sensible tool life, stable chip formation and predictable productivity. For customers seeking to standardise on a single insert family across similar materials, this solution reduces tooling complexity while maintaining high process security. Contact Metav Werkzeuge for tailored recommendations on grade selection or toolholder pairing and arrange an application review to ensure optimal performance. Technical data Article number: CNMG190612-MS3-WSM01-WALTER SKU: CNMG190612-MS3-WSM01-WALTER Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger‑tec Silver Grade: WSM01 Shape: Rhombic 80° Numbers / Core technical data Insert size: 19 mm Corner radius: 1.2 mm Clearance angle: 0° (negative) Plate thickness code: 06 Tolerance class: M Designs / Special features Chipbreaker: MS3 Coated carbide grade Material suitability: stainless steels and heat‑resistant superalloys (S / M) Robust cutting edge for heavy applications Standard CNMG mounting format FAQ What materials is this insert suitable for? The CNMG190612‑MS3 WSM01 insert is designed for stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S); the Tiger‑tec Silver coating and WSM01 grade support stable cutting in these materials. Which chipbreaker is integrated and what advantage does it offer? The insert features the MS3 chipbreaker, which promotes controlled chip formation and evacuation, enhancing surface finish and reducing the risk of built‑up edge during turning. How does the 1.2 mm corner radius influence performance? A 1.2 mm corner radius provides a balance between edge strength and cutting sharpness, improving durability in interrupted cuts and contributing to consistent dimensional accuracy. Is the insert compatible with standard CNMG toolholders? Yes, the CNMG190612 format conforms to common CNMG toolholders, simplifying holder selection and reducing tooling variants in the workshop. Can this insert be used for finishing as well as roughing? The geometry and grade allow both roughing and medium finishing operations; for fine finishing, select appropriate cutting parameters and verify surface requirements in trial cuts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG190612-MS3 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of high process security, robust edge geometry and effective chip control for consistent production results; order the inserts directly via Metav Werkzeuge or consult our specialists for application advice. CNMG190612-MS3 WSM20S Drehwendeschneidplatte — Tiger·tec Silver grade, for stainless steels and superalloys — Walter Tools The CNMG190612-MS3 WSM20S is a coated carbide indexable turning insert designed for demanding machining of stainless steels and heat‑resistant superalloys, offering a stable cutting edge and controlled chip formation for productive turning operations Tiger·tec Silver coating for thermal resistance WSM20S grade optimised for M and S materials Rhombic 80° CNMG form for versatile turning 1.2 mm corner radius for increased edge strength Consistent chip control and elevated thermal resistance The WSM20S grade, developed within the Tiger·tec Silver series, combines a wear‑resistant coated carbide substrate with a chipbreaker geometry optimised for ductile and heat‑sensitive materials. This configuration promotes a stable chip formation even under elevated cutting temperatures typical of machining stainless steel and nickel‑based alloys. The MS3 chipbreaker balances shear and breakage, reducing the risk of built‑up edge and enabling more predictable tool life. For production environments where repeatability matters, the insert’s coating and chip control characteristics support steady cycle times and fewer unplanned tool changes. Geometry designed for robustness and reliable turning The CNMG 190612 form delivers a robust 80° rhombic shape suited to a wide range of turning tasks, while the negative 0° rake and 1.2 mm corner radius prioritise edge strength for heavier cuts and intermittent engagement. The moderate corner radius enhances resistance to chipping and improves surface finish consistency when compared with sharper geometries. The plate thickness and form factor provide secure clamping and repeatable positioning in standard toolholders, making the insert a practical choice for workshops seeking a blend of durability and versatility in one indexable solution. Application guidance and process benefits Classified for ISO groups M and S, the insert is explicitly tailored to stainless steels and heat‑resistant superalloys, where thermal load and material toughness demand specialised grades. The coated carbide composition helps withstand thermal softening, while the insert geometry assists in evacuation of chips and reduction of edge build‑up. When matched with appropriate cutting parameters, this insert supports increased uptime and consistent surface integrity. Walter Tools’ production standards and the Tiger·tec Silver technology together deliver process reliability for serial machining and demanding single‑part production alike. Contact Metav Werkzeuge today for tailored cutting data and availability of the Walter Tools CNMG190612‑MS3 WSM20S inserts; our technical consultants are reachable at info@metav-werkzeuge.com or +49 2822 7131930 and will advise on the best setup for the intended application Technical Data Article number: CNMG190612-MS3-WSM20S-WALTER SKU: CNMG190612-MS3-WSM20S-WALTER Product type: Drehwendeschneidplatte (indexable turning insert) Brand: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Facts Insert designation: CNMG190612-MS3 WSM20S Shape: Rhombus 80° (CNMG) Inscribed circle / size: 19 Corner radius: 1.2 mm Thickness: 06 Free cutting angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Silver (coated carbide) Chipbreaker: MS3 Material suitability: stainless steels (ISO M), superalloys/titanium‑alloys (ISO S) Application focus: heavy turning, heat‑resistant materials, demanding surface integrity FAQ What materials is this insert suitable for? The CNMG190612‑MS3 WSM20S insert is designed primarily for stainless steels (ISO M) and heat‑resistant superalloys/titanium‑based materials (ISO S) where thermal resistance and edge stability are critical. How does the Tiger·tec Silver coating benefit machining? Tiger·tec Silver enhances thermal resistance and wear protection on the WSM20S grade, supporting more stable cutting edges and longer tool life under the higher temperatures encountered when machining stainless steel and superalloys. Which chipbreaker should be selected for better surface finish? The MS3 chipbreaker on this insert balances chip control with shear behaviour; it promotes predictable chipbreaking and can improve surface integrity when paired with suitable feeds and cutting speeds for the processed material. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the manufacturers named. The offered item is original and brand‑new.
CNMG190612-NRS WSM10S WSM10S Wendeplatten - Walter Tools
Combining the WSM10S Tiger·tec Silver coating with an NRS chipbreaker and a robust 1.2 mm corner radius delivers reliable cutting performance in stainless steels and heat‑resistant alloys; order the CNMG190612-NRS WSM10S directly via Metav Werkzeuge or ask our consultants for tailored application support. CNMG190612-NRS WSM10S — turning insert (Rhombic 80°, 1.2 mm) by Walter Tools The CNMG190612-NRS WSM10S is a coated carbide turning insert engineered for demanding turning of stainless steels and heat‑resistant superalloys, offering thermal stability and stable chip control in continuous and interrupted cuts. Tiger·tec Silver coating for thermal stability Optimised NRS chipbreaker for secure chip control Rhombic 80° shape with 1.2 mm corner radius Negative 0° clearance for sturdy cutting edge Consistent cutting in tough materials for predictable tool life The WSM10S grade, based on Tiger·tec Silver coating technology, combines a wear‑resistant coated carbide substrate with a surface architecture that reduces flank wear and supports steady performance when machining stainless steels and superalloys. This translates into longer intervals between indexings and a more predictable tool life under elevated temperatures. The result is improved machine uptime and fewer interruptions in production, which supports measurable gains in overall process efficiency. Secure chip control and edge stability for heavier cuts The integrated NRS chipbreaker is optimised to produce controllable chip forms even in materials that tend to form long, stringy chips. Coupled with a negative 0° clearance, the geometry provides a robust support for the cutting edge, reducing the risk of chipping under higher feed or interrupted cuts. The Rhombic 80° format and 1.2 mm corner radius balance strength and versatility, making the insert suitable for a range of turning tasks where both edge life and surface integrity are priorities. The CNMG190612-NRS designation reflects the insert form and chipbreaker combination designed for these conditions. Versatile geometry that supports surface quality and process security With a 19 mm inscribed circle and a plate thickness of 06, this insert offers stable seat support and repeatable positioning in standard toolholders. The design promotes consistent contact conditions, which helps to maintain surface quality and dimensional stability across batches. For workshops facing material mixes where rostfrei (stainless) grades and high‑temperature alloys occur, the insert’s balance of thermal resistance and mechanical edge support fosters process security and higher productivity. If further technical parameters are required for integration into a specific turning cycle, Metav Werkzeuge can provide supplementary data and application notes by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Discuss Walter Tools Tiger·tec Silver inserts with Metav Werkzeuge to select the optimal CNMG190612-NRS WSM10S configuration for the application and receive expert recommendations tailored to the machining task. Technical Data Article number: CNMG190612-NRS-WSM10S-WALTER Label: Drehwendeschneidplatte CNMG190612-NRS WSM10S Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Series: Tiger-tec Silver Grade: WSM10S Facts Insert shape: Rhombus 80° Inscribed circle: 19 mm Thickness: 06 Nose radius: 1.2 mm Clearance: 0° (negative) Chipbreaker: NRS Substrate designation: S / M Tolerance class: M Special features Coating: Tiger·tec Silver Suitability: stainless steels (M) Suitability: heat‑resistant superalloys / titanium (S) Application focus: demanding turning operations, stable chip formation FAQ What materials is this insert best suited for? The CNMG190612-NRS WSM10S insert from Walter Tools is optimised for stainless steels and heat‑resistant superalloys, reflecting the WSM10S grade’s emphasis on thermal resistance and edge stability. How does the NRS chipbreaker benefit turning operations? The NRS chipbreaker on this insert promotes controlled chip formation and evacuation, reducing the likelihood of entangling chips and supporting steady cutting forces during turning on tough, tenacious materials. Does the negative 0° clearance affect tool life? The 0° (negative) clearance offers a sturdier cutting edge seat, which can improve resistance to chipping during heavy or interrupted cuts and thereby contribute to longer effective insert life in many applications. What surface finish can be expected with a 1.2 mm nose radius? A 1.2 mm corner radius provides a compromise between robustness and finish capability; it supports good surface integrity while offering enhanced edge strength for semi‑finishing and finishing passes on challenging materials. Is this insert compatible with standard CNMG toolholders? The CNMG190612‑NRS geometry corresponds to standard CNMG seat forms; compatibility with specific holders should be confirmed by checking seat tolerances and clamping characteristics for the intended toolholder. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CNMG190612-NRS WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM20S grade for reliable chip control and long tool life when machining demanding materials; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. CNMG190612-NRS WSM20S — indexable turning insert, Tiger·tec Silver, Walter Tools The CNMG190612-NRS WSM20S is an indexable turning insert engineered for heavy and heat‑resistant materials, offering stable cutting performance in rostfreier Stahl and superalloys. Tiger·tec Silver coated grade WSM20S For rostfreier Stahl and superalloys Rhombic 80° form, 1.2 mm nose radius NRS chipbreaker, negative 0° relief High‑temperature stability and consistent performance for production The Tiger·tec Silver coating combined with the WSM20S grade provides enhanced heat resistance and wear control, which translates into longer tool life and fewer interruptions in a production environment. For shops facing thermal loads and built‑up edge when machining rostfreier Stahl, this combination improves chip formation and protects the cutting edge against premature wear. The coated carbide substrate supports higher cutting parameters than uncoated grades, enabling a more economical process by reducing insert changes and machine downtime. Geometry and chip control that improve process reliability A Rhombic 80° insert form with a 1.2 mm corner radius and the NRS chipbreaker are designed to produce stable, manageable chips and a predictable cutting force. The negative 0° relief offers robustness at the cutting edge, making the insert suitable for interrupted cuts or tougher workpiece conditions. These geometric choices reduce vibration and help maintain dimensional accuracy, which benefits batch production and tight tolerance turning operations. The result is a more repeatable process and improved surface quality on the finished part. Application range and workshop integration for machining strategies This insert is specified for ISO groups M and S, meaning it is intended for rostfreier Stahl and heat‑resistant superalloys (including certain titanium applications). Its tolerance class M ensures consistent fit and repeatable seating in standard tool holders, simplifying tool management across milling and turning setups. The compact 19 mm inscribed circle and thickness designation 06 make it compatible with a wide range of turning tool systems, while the clear material suitability reduces the need for trial‑and‑error in production planning. Discuss application recommendations for the Walter Tools Tiger·tec Silver grade with Metav Werkzeuge today — contact info@metav-werkzeuge.com or call +49 2822 7131930 to check compatibility with specific workpiece materials and machining conditions Technical data Article number / SKU: CNMG190612-NRS-WSM20S-WALTER Label: Drehwendeschneidplatte CNMG190612-NRS WSM20S Walter Tools Grade / Sort: WSM20S Series: Tiger-tec Silver Geometry: CNMG190612-NRS Numbers / Facts Inscribed circle: 19 mm Corner radius: 1.2 mm Thickness: 06 Relief angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Silver Chipbreaker: NRS Suitable materials: rostfreier Stahl; heat‑resistant superalloys / titanium (ISO groups M, S) Application focus: heavy machining, high thermal loads FAQ What materials is this insert best suited for? The CNMG190612-NRS WSM20S from Walter Tools is designed primarily for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), offering optimised chip formation and thermal stability. How does the NRS chipbreaker affect machining? The NRS chipbreaker promotes short, controlled chips and steady cutting forces; in combination with the Tiger·tec Silver coating on the WSM20S grade, it supports consistent surface finish and fewer interruptions. Is the negative 0° relief suitable for interrupted cuts? Yes; the negative 0° relief increases edge strength and resistance to shock, making the insert robust for interrupted cuts or less stable clamping conditions. What does the 1.2 mm corner radius mean for surface finish? A 1.2 mm nose radius balances strength and finish: it increases edge durability while producing a good surface quality on turned components, particularly when machining tough alloys. Can this insert be used in standard CNMG tool holders? The CNMG190612‑NRS geometry and tolerance class M are compatible with standard CNMG holders; proper clamping and seat cleanliness are recommended to ensure repeatable performance. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners and are mentioned solely for explanatory purposes. There is no affiliation or partnership implied between Metav Werkzeuge and the brands referenced. The offered item is an original, brand‑new product from the manufacturer (Walter Tools).
CNMG190612-RM5 WMP20G RM5 Wendeplatten - Walter Tools
Take advantage of the WMP20G grade and Tiger·tec Gold coating for secure chip control and extended edge life; order via Metav Werkzeuge or request application advice from our consultants to integrate these inserts into a productive turning process. CNMG190612-RM5 WMP20G turning insert for rostfreier Stahl by Walter Tools — Rhombic 80°, 1.2 mm corner radius The CNMG190612-RM5 WMP20G is a coated carbide turning insert designed for machining rostfreier Stahl under medium to robust cutting conditions, combining a Tiger·tec Gold coating with an RM5 chipbreaker to support secure chip formation and stable cutting edges. Tiger·tec Gold coating for stable edge life RM5 chipbreaker optimised for rostfreier Stahl Rhombic 80° form with 1.2 mm corner radius Negative 0° rake for robust cutting performance Reliable cutting performance for rostfreier Stahl with coated carbide technology The coated carbide composition of the insert, identified by the WMP20G grade and protected with Tiger·tec Gold, is engineered to reduce the typical risks of machining rostfreier Stahl such as work hardening and built-up edge. The combination of a wear-resistant coating and a dedicated chipbreaker promotes stable chip formation, which in turn lowers the frequency of interruptions for chip clearing and contributes to longer uninterrupted production runs. By favouring steady cutting behaviour over aggressive metal removal alone, the insert improves process predictability and reduces scrap rates while maintaining consistent part tolerances. Geometry designed for consistent surface quality and tool life The Rhombic 80° geometry and the 1.2 mm corner radius provide a balance between edge strength and finishing capability: the obtuse cutting angle distributes cutting forces across a larger edge, reducing the risk of edge chipping during intermittent cuts, while the rounded corner helps achieve a predictable surface finish. The negative 0° rake further reinforces the cutting edge for robust engagement in tougher conditions, making the insert particularly suitable where fixture stability is variable or where heavier depths of cut are required. These geometric choices translate into fewer tool changes and more repeatable cycles on the shop floor. Productivity and process security through optimised chip control Equipped with the RM5 chipbreaker, this insert supports manageable chip shapes for rostfreier Stahl, decreasing the chance of problematic chips that can damage the workpiece or machine. Improved chip control enhances overall process security and contributes directly to higher productivity by reducing downtime for cleaning and rework. As a Walter Tools product made for industrial use, the insert aligns with expectations for consistent performance, allowing planners to quantify tool life more reliably and to plan maintenance and tool replenishment with greater confidence. For recommendations on applying Walter Tools turning inserts for rostfreier Stahl or to discuss process parameters, contact Metav Werkzeuge by e-mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored advice and supply options Technical Data Article number: CNMG190612-RM5-WMP20G-WALTER Label: Drehwendeschneidplatte CNMG190612-RM5 WMP20G Walter Tools Manufacturer: Walter Tools Product type: Turning insert Core data Insert form: Rhombic 80° Corner radius: 1.2 mm Size: 19 mm Thickness code: 06 Rake angle: 0° (negative) Features Grade: WMP20G (Tiger·tec Gold coated carbide) Chipbreaker: RM5 Series: Tiger·tec Gold Material application: rostfreier Stahl Cutting style: robust / medium to heavy conditions FAQ What materials is this insert intended for? This turning insert is designed primarily for machining rostfreier Stahl; the WMP20G grade and Tiger·tec Gold coating support secure chip formation when working with these materials. How does the RM5 chipbreaker help in practice? The RM5 chipbreaker on the CNMG190612-RM5 WMP20G insert shapes chips to reduce entanglement and improve evacuation, which supports continuous cutting and lowers the risk of workpiece damage. What advantages does the Rhombic 80° form provide? A Rhombic 80° form offers a robust cutting edge and flexible approach angles, enabling repeatable surface integrity and enhanced edge strength for intermittent or heavier cuts. Is the negative 0° rake suitable for unstable setups? Yes, the negative 0° rake increases edge robustness, making this insert suitable for setups where rigidity varies or where heavier depths of cut are required. Can the CNMG190612-RM5 WMP20G be used for finishing as well as roughing? The geometry and 1.2 mm corner radius balance strength and finish capability, so the insert can be used for both roughing and semi-finishing operations depending on cutting data and machine stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the brands mentioned. The offered article is original, brand-new goods from the manufacturer (Walter Tools).
CNMG190612-RM5 WMP20S WMP20S Wendeplatten - Walter Tools
The combination of the Tiger‑tec Silver coating and the WMP20S carbide grade delivers stable chip formation and extended tool life for machining stainless steel, while the rhombic 80° geometry with a 1.2 mm nose radius ensures reliable surface quality and tool strength; order directly via Metav Werkzeuge or consult the specialists for application advice. CNMG190612-RM5 WMP20S Turning insert — Tiger‑tec Silver coated carbide for stainless steel, Walter Tools The CNMG190612-RM5 WMP20S is a coated indexable turning insert by Walter Tools, designed for dependable performance when machining stainless steel under medium to robust cutting conditions Tiger‑tec Silver coated carbide WMP20S Optimised for stainless steels (ISO M) Rhombic 80° shape, 1.2 mm nose radius Negative 0° relief, stable chip control RM5 Consistent performance when machining stainless steel The Tiger‑tec Silver coating combined with the WMP20S grade results in a coated carbide substrate engineered for high thermal and mechanical loads typical of stainless steel (ISO M) machining. The special coating supports stable chip formation and reduces the tendency for built‑up edge, which commonly shortens tool life in austenitic and duplex alloys. The outcome is a predictable process window, fewer unscheduled tool changes and more consistent component quality — advantages that translate directly into better machine uptime and lower part costs. Geometry that balances strength and surface finish The rhombic 80° insert form with a 1.2 mm nose radius and negative 0° relief gives a robust cutting edge that resists chipping while still allowing access on close contours and interrupted cuts. The RM5 chipbreaker is tuned for controlled fragmentation of tough, ductile chips produced by stainless steels, improving swarf evacuation and reducing nose wear. This geometry combination supports repeatable surface finishes and helps maintain dimensional accuracy over longer series runs. Improved process efficiency and predictable productivity Using a grade and coating optimised for stainless steels reduces downtime for edge dressing and tool replacement; the result is measurable savings across production batches. The coated WMP20S inserts deliver a balance between tool life and consistent cutting action, supporting higher feed stability and fewer secondary operations. Backed by the Walter Tools engineering approach, the insert offers process reliability that helps stabilise production costs and supports justifiable tool change intervals in a mixed production environment. Application guidance and practical benefits These inserts are suited for facing, external turning and semi‑finishing where stainless steel workpieces demand secure chip control and resistance to thermal softening. For roughing operations with heavier depths of cut the robust geometry and chip control contribute to safe material removal; for finishing passes the fine nose radius helps achieve the desired surface quality. If additional guidance is required, Metav Werkzeuge’s consultants can provide application tips and match the insert to appropriate clamping systems and cutting data. For reliable stainless steel turning with Walter Tools’ Tiger‑tec Silver WMP20S inserts, contact Metav Werkzeuge for tailored application advice and fast supply: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: CNMG190612-RM5-WMP20S-WALTER Designation: CNMG190612-RM5 WMP20S Product type: Turning insert Manufacturer: Walter Tools Series: Tiger‑tec Silver Core specifications Size: 19 Thickness: 06 Nose radius: 1.2 mm Relief angle: 0° (negative) Shape: Rhombic 80° Chipbreaker: RM5 Features & applications Coating: Tiger‑tec Silver Grade: WMP20S (coated carbide) Suitable for: stainless steel (ISO M) Typical use: medium to robust cutting conditions Family: Tiger‑tec Silver series FAQ What materials is this insert designed for? The CNMG190612-RM5 WMP20S insert by Walter Tools is developed primarily for stainless steel workpieces (ISO M), offering controlled chip formation and stable cutting under medium to robust conditions. How does the RM5 chipbreaker affect performance? The RM5 chipbreaker on this insert promotes predictable chip fragmentation during stainless steel machining, improving swarf control and reducing the risk of built‑up edge on the cutting face. Is the geometry suitable for both roughing and finishing? Yes; the rhombic 80° form with a 1.2 mm nose radius provides the strength required for heavier cuts while maintaining the capability to produce acceptable surface quality on finishing passes. Can this insert be used in interrupted cuts or heavy engagement? The negative 0° relief and robust coated carbide grade support use in intermittent turning and heavier engagements, where edge stability and resistance to chipping are important. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation with or endorsement by the brand owners. The offered item is an original, factory‑new product of the manufacturer.
CNMG190612-RM5 WMP30G WMP30G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the RM5 chipbreaker for reliable chip control and extended tool life; order via Metav Werkzeuge or consult the team for application-specific recommendations. CNMG190612-RM5 WMP30G — Turning indexable insert, Tiger·tec Gold, by Walter Tools The CNMG190612-RM5 WMP30G is a rhombic 80° turning indexable insert engineered for medium to robust machining of stainless steels, offering secure chip formation and consistent performance. Tiger·tec Gold coating for stainless steels RM5 chipbreaker for secure chip control Rhombic 80° form for versatile turning 1.2 mm corner radius for robust edge strength Consistent chip control for uninterrupted production The combination of the RM5 chipbreaker and the Tiger·tec Gold coating provides reliable chip formation when machining austenitic and other challenging stainless steels. The insert’s coated carbide grade is tailored to reduce built-up edge and to stabilise the cutting edge under elevated temperatures; as a result, process reliability and component consistency are improved. In practical terms, this leads to fewer interruptions for edge corrections and a steadier output in serial production, which supports predictable cycle times and lower rework rates. Geometry that balances strength and versatility The rhombic 80° geometry, paired with a negative rake of 0°, combines cutting-edge stability with broad applicability across turning operations. The 1.2 mm corner radius increases edge strength for interrupted cuts and plunge turning, reducing the risk of chipping during heavy passes. This geometry also helps maintain good surface integrity on the workpiece, making the insert suitable for both roughing and semi-finishing tasks in workshop and production environments. Optimised for stainless steels and robust conditions Designed for the ISO M material group, this insert supports machining strategies where material toughness and heat generation are significant concerns. The Tiger·tec Gold technology increases thermal resistance and wear stability, while the RM5 chipbreaker aids consistent chip control even under variable feed and depth conditions. The result is a combination that often improves tool life versus standard grades and reduces the frequency of insert changes, thereby lowering total process cost and improving uptime. Practical integration and handling benefits The insert follows the common CNMG form factor, simplifying toolholder selection and inventory management for systems already set up for rhombic 80° inserts. The clear designation assists with fast ordering and traceability on the shop floor. For additional application data or optimisation of cutting parameters, Metav Werkzeuge can supply technical guidance and recommendations to match the tool grade to the specific stainless steel variant and machining strategy. For optimised machining with Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored advice and stock availability — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CNMG190612-RM5-WMP30G-WALTER Designation: CNMG190612-RM5 WMP30G Product type: Turning indexable insert Facts Corner radius: 1.2 mm Insert size: 19 Thickness designation: 06 Free angle: 0° (negative) Chipbreaker: RM5 Special features Series: Tiger·tec Gold Grade type: coated carbide Geometry: rhombic 80° Application group: stainless steels (ISO M) FAQ Is this insert suitable for machining stainless steels? The CNMG190612-RM5 WMP30G is specifically developed for stainless steels and its grade and chipbreaker support secure chip formation in such materials. What are the key geometry specifications of the insert? The insert features a rhombic 80° form, a 1.2 mm corner radius and a 0° negative rake, which together deliver robust cutting performance. Which chipbreaker is fitted and what benefit does it provide? The RM5 chipbreaker offers controlled chip formation for variable cutting conditions, aiding process stability and surface quality. Can this insert be used for interrupted cuts? Yes, the 1.2 mm corner radius and the negative rake geometry enhance edge strength for interrupted and heavy-duty turning operations. How is the insert designated for ordering and stock management? Use the designation CNMG190612-RM5 WMP30G or the article number CNMG190612-RM5-WMP30G-WALTER for precise ordering and inventory tracking. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is among the world’s leading manufacturers of precision cutting tools for metalworking and is part of the Sandvik Group. Protected trademarks and brand names remain the property of their respective owners. There is no affiliation between our company and the mentioned brands beyond the sale of original, factory-new products of the manufacturer.
CNMG190612-RM5 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of heat‑resistant Tiger·tec Silver coating, a stable RM5 chipbreaker and robust negative geometry to secure consistent tool life and process reliability; order or request advice via Metav Werkzeuge for fast application support. CNMG190612-RM5 WSM10S indexable turning insert (Tiger·tec Silver) by Walter Tools — for rostfreier Stahl and superalloys, 0° negative rake CNMG190612-RM5 WSM10S is an indexable turning insert designed for heavy cutting on rostfreier Stahl and heat‑resistant alloys; rhombic 80° form with 1.2 mm corner radius for durable edge performance Tiger·tec Silver coating for heat resistance Optimised RM5 chipbreaker for stable chips 0° negative rake for robust turning 1.2 mm corner radius for edge strength Suitable for rostfreier Stahl and superalloys Increased productivity with heat‑resistant coating and chip control The combination of the Tiger·tec Silver coated grade and an RM5 chipbreaker provides a measurable improvement in machining stability when working with difficult‑to‑cut materials. Coated carbide increases resistance to high cutting temperatures and reduces flank wear, which translates into longer tool life and fewer indexings. The controlled chip formation reduces the need for manual chip handling and helps maintain cycle time consistency. For production environments aiming to lower maintenance frequency while keeping cutting parameters aggressive, this grade offers a clear efficiency advantage. Robust geometry for secure machining and reproducible results The rhombic 80° shape with a 0° negative rake and 1.2 mm corner radius ensures a sturdy cutting edge that tolerates interrupted cuts and unstable clamping conditions. The negative geometry shifts cutting forces through the insert body, increasing edge strength and reducing chipping risk when machining alloys that produce heavy built‑up edge. The tolerance class M supports repeatable seating and interchangeability in toolholders, making the component suitable for standardised tool systems and automated tool change routines where process reliability is critical. Practical benefits for workshop and production planning Designed for the S and M ISO application groups, the grade addresses both superalloys and rostfreier Stahl, which are known for poor thermal conductivity and tendency to work‑harden. Using this insert can reduce the frequency of tool changes and improve dimensional stability of turned parts under demanding conditions. The insert’s geometry and coating technology combine to offer consistent surface finish and predictable wear progression, helping planners calculate tool life more reliably and optimise tooling budgets. Technical support and cutting data are available to assist with parameter selection and to adapt the solution to specific machine‑workpiece combinations. Contact Metav Werkzeuge for tailored cutting data and application advice on Walter Tools Tiger·tec Silver inserts to optimise cycle time and tool life Technical Data SKU: CNMG190612-RM5-WSM10S-WALTER Designation: CNMG190612-RM5 WSM10S Type: Drehwendeschneidplatte Brand: Walter Tools Facts Inscribed circle / size: 19 mm Corner radius: 1.2 mm Thickness code: 06 Rake angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Silver (coated carbide) Chipbreaker: RM5 Geometry: Rhombus 80° Grade: WSM10S (coated carbide for S/M) Application: Superalloys (S) and rostfreier Stahl (M) FAQ What materials is this insert suited for? The CNMG190612-RM5 WSM10S insert from Walter Tools is designed for superalloys and rostfreier Stahl, offering heat resistance and stable chip control for these material groups. How does the RM5 chipbreaker affect machining? The RM5 chipbreaker promotes predictable chip formation and evacuation, improving surface finish and reducing the risk of built‑up edge during continuous turning operations. Can the insert handle interrupted cuts? Yes, the rhombic 80° form combined with a 0° negative rake and 1.2 mm corner radius provides enhanced edge strength suitable for interrupted cuts and tougher clamping scenarios. Is the Tiger·tec Silver coating beneficial for high cutting temperatures? The Tiger·tec Silver coating improves thermal resistance and wear behaviour, making the grade well suited to applications with elevated cutting temperatures typically encountered with superalloys and rostfreier Stahl. What is the tolerance class and why does it matter? The tolerance class M ensures consistent seating and interchangeability in toolholders, supporting reproducible positioning and simplifying tool change logistics Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG190612-RM5 WSM20S RM5 Wendeplatten - Walter Tools
Take advantage of the combination of high-temperature stability, secure chip control and robust edge life for reliable turning of difficult-to-cut alloys; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CNMG190612-RM5 WSM20S indexable turning insert — Tiger‑tec Silver, for rostfreier Stahl and superalloys | Walter Tools A CNMG190612-RM5 WSM20S is a rhombic 80° negative‑rake indexable insert designed for heavy and demanding turning tasks in rostfreier Stahl and heat‑resistant superalloys. Tiger‑tec Silver coating for high temperature stability Optimised RM5 chipbreaker for secure chip control Rhombic 80° form with 1.2 mm corner radius Negative 0° rake for heavy‑duty turning Higher process reliability with material‑matched grade The insert’s WSM20S grade, formulated within the Tiger‑tec Silver family, is engineered for turning of rostfreier Stahl and heat‑resistant superalloys. The coated carbide composition provides improved thermal resistance and stable wear behaviour that reduces the risk of edge build‑up when machining tough, heat‑sensitive materials. Practically, this means longer intervals between index changes and fewer unscheduled tool stops, which supports a steadier production flow and predictable component quality. The combination of coating and substrate enables consistent performance under elevated cutting temperatures. Precise geometry for strong edges and consistent surface finish This indexable cutting solution features an RM5 chipbreaker and a rhombic 80° seating that together deliver controlled chip formation and reliable cutting forces in heavier cuts. The 1.2 mm corner radius adds edge strength for interrupted cuts and roughing passes while still supporting acceptable surface quality for many finishing operations. The negative 0° rake contributes to tool stability and reduced vibration in robust machining scenarios. These geometric choices lower the likelihood of premature chipping and help maintain a predictable surface finish, which is particularly valuable in serial production and tight‑tolerance turning. Practical benefits for workshop integration and productivity Supplied in the common CNMG format, the insert fits widely used toolholders and can be integrated into existing turning programmes with minimal adjustment. The RM5 chip control reduces manual chip handling and supports uninterrupted operation on automatic lathes and CNC turning centres. By combining chip control, thermal robustness and a resilient cutting edge, the insert helps increase cutting parameters where admissible, improving throughput without compromising repeatability. For inquiries about cutting data, workpiece types or optimal insert clamping, Metav Werkzeuge provides technical advice and selection support to match the insert to specific turning applications. Contact Metav Werkzeuge today for tailored application advice and to secure Walter Tools CNMG190612-RM5 WSM20S inserts from stock Technical data Article number: CNMG190612-RM5-WSM20S-WALTER Designation: CNMG190612-RM5 WSM20S Product type: Indexable turning insert Series: Tiger‑tec Silver Manufacturer: Walter Tools Core specifications Plate size: 19 Thickness: 06 Corner radius: 1.2 mm Plate form: Rhombus 80° Free angle: 0° (negative) Tolerance class: M Special features Grade: WSM20S (coated carbide) Chipbreaker: RM5 Material suitability: rostfreier Stahl (M), heat‑resistant superalloys / Titanium (S) Execution: G Material code: S / M FAQ Which materials is this insert best suited for? The CNMG190612-RM5 WSM20S insert is optimised for rostfreier Stahl and for heat‑resistant superalloys and titanium alloys, offering thermal stability and secure chip formation for these demanding material classes. What benefits does the Tiger‑tec Silver grade provide? The Tiger‑tec Silver technology on the WSM20S grade improves thermal resistance and wear stability, which translates into longer tool life and more consistent component quality when machining tough, temperature‑sensitive materials. When is the RM5 chipbreaker recommended? The RM5 chipbreaker is designed for safe chip control in medium to heavy turning operations; it supports continuous chip evacuation and reduces interruptions in automated turning processes. How does the 1.2 mm corner radius affect machining results? A 1.2 mm radius increases edge robustness for interrupted cuts and higher feed rates, balancing edge strength with achievable surface finish for many semi‑finish and roughing tasks. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanation. There is no affiliation between Metav Werkzeuge and the mentioned brands. The offered article is an original, factory‑new product of the named manufacturer.
CNMG190612-RM5 WSM30S RM5 Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating, a robust RM5 chipbreaker and a 0° negative rake delivers stable cutting-edge life and consistent chip control when machining stainless steel and heat-resistant alloys. Benefit from versatile Rhombic 80° geometry and a 1.2 mm corner radius for improved surface finish and predictable tool performance. Order the CNMG190612-RM5 WSM30S directly via Metav Werkzeuge or ask our consultants if needed. CNMG190612-RM5 WSM30S indexable turning insert — Tiger·tec Silver coating, for stainless steel & superalloys | Walter Tools A CNMG190612-RM5 WSM30S indexable turning insert engineered for machining stainless steel and heat-resistant superalloys with secure chip control and long tool life Tiger·tec Silver coated for edge life RM5 chipbreaker for stable chip control Rhombic 80° shape for versatile turning 0° negative rake for tough materials Reliable performance on stainless steel and superalloys The WSM30S grade is a coated carbide solution developed for demanding materials. Its Tiger·tec Silver coating combines wear resistance with thermal stability, supporting machining of stainless steel (ISO group M) and heat-resistant superalloys and titanium (ISO group S). This composition reduces the tendency for built-up edge and supports a consistent cutting process, which is particularly valuable in serial production where repeatable surface quality and predictable insert life are required. Geometry and chip control that improve process stability Rhombic 80° form and the RM5 chipbreaker work together to deliver controlled chips and secure cutting even at higher feeds. The insert’s 1.2 mm corner radius stabilises the cutting edge for small interrupted cuts and helps achieve improved surface integrity. With a 0° negative rake, the geometry prioritises edge robustness and resistance to thermal and mechanical loading, making it suitable for heavy cuts and the poorer heat conductivity typical of superalloys. Productivity gains and cost-effective usage Using a grade optimised for these materials yields longer tool life and fewer changeovers, which translates into improved cycle times and lower overall machining costs. The insert’s tolerance class M and the standard CNMG shank compatibility ensure predictable seating and repeatability across toolholders. By selecting a grade tailored to the workpiece group, process windows broaden and cutting data become more reliable, enabling higher metal removal rates without compromising surface finish. Practical integration and machining advice This indexable turning insert fits standard CNMG toolholders and is intended for secure clamping with the correct seat and screw. For best outcomes, pair the insert with stable tooling and suitable coolant strategies when machining heat-prone materials. The combination of Tiger·tec Silver technology and the RM5 chipbreaker simplifies the transition from trial to production, helping to maintain consistent part quality and reducing unscheduled downtime. Contact Metav Werkzeuge for application-specific cutting data and availability of the Walter Tools CNMG190612-RM5 WSM30S insert Technical data Article number: CNMG190612-RM5-WSM30S-WALTER Designation: CNMG190612-RM5 WSM30S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM30S Facts Size: 19 Corner radius: 1.2 mm Thickness: 06 Relief angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Silver Substrate: coated carbide Chipbreaker: RM5 Shape: Rhombic 80° Suitable for: stainless steel (M), superalloys & titanium (S) FAQ Which materials is this insert intended for? The CNMG190612-RM5 WSM30S insert is designed for stainless steel (ISO group M) and for heat-resistant superalloys and titanium (ISO group S), providing reliable chip control and edge stability in these demanding materials. How does the RM5 chipbreaker influence machining? The RM5 chipbreaker on this Walter Tools insert promotes controlled chip formation, reducing entanglement and facilitating safe evacuation, which helps to maintain consistent surface finish during longer production runs. What advantages does the Tiger·tec Silver coating provide? Tiger·tec Silver enhances wear resistance and thermal stability, extending the effective tool life of the WSM30S grade and improving process reliability when cutting tough, heat-generating materials. What corner radius and geometry should be expected for fine finishing? The insert offers a 1.2 mm corner radius and a Rhombic 80° shape; this combination balances edge strength with surface quality, making the insert suitable for finishing and medium turning operations. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG190612-RP5 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the RP5 chipbreaker to secure consistent machining results on Stahl; the robust 1.2 mm corner radius and negative 0° geometry support stable cutting and predictable tool life. Order directly via Metav Werkzeuge or consult our specialists for application-tailored recommendations. CNMG190612-RP5 WPP05G indexable turning insert by Walter Tools — Tiger·tec Gold, for Stahl The CNMG190612-RP5 WPP05G is an indexable turning insert designed for reliable finishing and semi-finishing of Stahl components, combining a Tiger·tec Gold coated carbide grade with an RP5 chipbreaker for controlled chip formation. Tiger·tec Gold coated carbide grade WPP05G Optimised RP5 chipbreaker for consistent chips Rhombic 80° geometry for versatile turning 1.2 mm corner radius for stable edge life Consistent surface quality through advanced coating and grade selection The combination of the Tiger·tec Gold coating and the grade WPP05G delivers a balance between wear resistance and toughness, which stabilises cutting in typical Stahl turning operations. The coated carbide resists abrasive wear while the substrate toughness reduces edge chipping; this results in more predictable tool life and a better surface finish on the workpiece. For users seeking repeatable results in batch production, the coated grade reduces the need for frequent tool changes and supports consistent dimensional accuracy. Geometry and chip control that reduce machining variability The rhombic 80° insert shape together with the RP5 chipbreaker promotes effective chip formation and evacuation in Stahl machining. The negative 0° free angle provides a stable cutting edge under varying cutting forces, while the 1.2 mm corner radius improves edge strength, reducing the likelihood of microchipping during interrupted cuts. These geometric features mean fewer process interruptions and reduced scrap rates, particularly in moderate depth-of-cut finishing applications. Practical productivity gains from a robust insert design The indexable design of the CNMG insert enables quick indexing and replacement, which minimises machine downtime and improves shop-floor throughput. The combination of the TIGER·tec Gold technology and the RP5 chip control contributes to longer intervals between tool changes, supporting higher overall equipment effectiveness. For customers processing medium to high volumes of Stahl components, this insert offers a pragmatic route to higher productivity without complex process adjustments. Application guidance and process fit This insert is tailored to Stahl group materials and performs best in turning operations where a controlled chip shape and robust edge are priorities. Use the rhombic 80° geometry for external turning and profiling where versatility is required; the RP5 chipbreaker is suited to producing short to medium chips at typical finishing and semi-finishing cutting parameters. When selecting cutting speeds and feeds, favour stable clamping and consistent coolant application to make the most of the coated grade’s wear resistance. For tailored advice on applications and to purchase genuine Walter Tools inserts such as this Tiger·tec Gold grade, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and order handling. Technical Data SKU: CNMG190612-RP5-WPP05G-WALTER Designation: CNMG190612-RP5 WPP05G Product type: Drehwendeschneidplatte (indexable turning insert) Manufacturer: Walter Tools Series: Tiger·tec Gold Core figures Insert size: 19 mm Corner radius: 1.2 mm Plate thickness: 06 Free angle: 0° (negative) Tolerance class: M Special features Coating technology: Tiger·tec Gold Grade: WPP05G (coated carbide) Chipbreaker: RP5 Plate form: Rhombus 80° Execution: G Material application: Stahl FAQ What materials is this insert suitable for? This insert is specified for Stahl materials; the WPP05G grade and Tiger·tec Gold coating are optimised for the thermal and chip-formation behaviour of Stahl. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on the CNMG190612-RP5 WPP05G promotes predictable chip shapes and improved evacuation in Stahl turning, reducing the risk of chip-related interruptions. What benefits does the 1.2 mm corner radius provide? A 1.2 mm corner radius increases edge strength and helps prevent microchipping under varying cutting loads, supporting longer tool life and consistent surface quality. Is this insert suitable for finishing and semi-finishing? Yes—this insert’s geometry, coated grade and chip control make it well suited to finishing and semi-finishing turning operations in Stahl. Can the insert be indexed during production to save time? The indexable design of the CNMG190612-RP5 enables quick indexing to a fresh cutting edge, reducing machine downtime and simplifying tool management. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com