CNMG190624-RP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a universal steel grade to raise productivity and tool life; the RP5 chipbreaker and Rhombus 80° geometry ensure stable chip control and consistent surface quality in demanding turning operations. Order directly via Metav Werkzeuge or request advice from our consultants. CNMG190624-RP5 WPP20G – Indexable turning insert for steel | Walter Tools A CNMG190624-RP5 WPP20G indexable turning insert designed for robust and economical roughing and finishing of steel components Tiger·tec Gold coating Universal grade for steel Rhombus 80° geometry Corner radius 2.4 mm Optimised cutting performance for steel turning Equipped with the Tiger·tec Gold coating and a WPP20G coated-carbide grade, this insert delivers a reliable balance between wear resistance and toughness for processing unalloyed and alloyed steel (ISO group P). The combination of a universal grade and a dedicated RP5 chipbreaker reduces the risk of built-up edge and promotes predictable chip formation, which leads to fewer interruptions and higher net productivity. By stabilising the cutting process, operators can maintain consistent feed and speed settings for longer periods, reducing tool change frequency and improving overall line efficiency. Geometry that supports surface quality and stability The Rhombus 80° shape and a 0° negative rake provide a robust cutting edge for both interrupted and continuous cuts, improving edge strength and resistance to mechanical shock. The substantial corner radius of 2.4 mm increases contact area and smooths cutting forces, which helps to achieve improved surface finishes on turned parts while extending the effective tool life. This geometric setup is particularly beneficial where tool stability and repeatable dimensional results are required, making the insert a dependable choice for medium- to heavy-duty turning tasks. Process reliability and economical use of tooling Designed as a practical solution for everyday machining, the insert’s WPP20G grade is tuned for broad applicability across typical steel operations, offering a good compromise between wear life and toughness. The insert’s tolerance class M supports consistent seating and repeatability in toolholders, which reduces setup variation and scrap. For production environments where uptime and repeatable quality are priorities, the indexed geometry combined with a coated-carbide grade contributes to predictable replacement cycles and simplified tool management, supporting cost-effective machining strategies. For tailored advice on Walter Tools' Tiger·tec Gold inserts and to secure the CNMG190624-RP5 WPP20G for demanding steel turning, contact Metav Werkzeuge for expert support and rapid availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: CNMG190624-RP5-WPP20G-WALTER Article: CNMG190624-RP5 WPP20G indexable turning insert Type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP20G Facts Insert size: 19 mm Thickness class: 06 Corner radius: 2.4 mm Geometry: Rhombus 80° Rake: 0° (negative) Chipbreaker: RP5 Tolerance class: M Material application: Steel (ISO P) Special features Coating technology: Tiger·tec Gold Coated-carbide grade: WPP20G Application focus: steel machining Robust edge for interrupted cuts Balanced wear resistance and toughness Stable chip control for continuous processes FAQ Which materials is this insert suitable for? The CNMG190624-RP5 WPP20G insert from Walter Tools is optimised for machining steel (ISO P), including unalloyed and alloyed steels. What benefits does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WPP20G grade enhances wear resistance while maintaining toughness, which helps to extend tool life and support consistent machining performance on steel. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on this insert promotes stable chip formation and evacuation, lowering the risk of chip-related interruptions and supporting reliable surface quality. Is the geometry suitable for interrupted cuts? Yes, the Rhombus 80° form with a 0° negative rake and a 2.4 mm corner radius offers a robust cutting edge that resists mechanical shock in interrupted cutting applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods from the manufacturer.
CNMG250924-RP5 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the RP5 chipbreaker for durable wear resistance and controlled chip formation; the 2.4 mm corner radius ensures robust edge strength in medium to heavy turning. Order the insert directly via Metav Werkzeuge or consult our machining experts for tailored cutting data and process optimisation. CNMG250924-RP5 WPP20G – Turning insert, for Steel, Walter Tools The CNMG250924-RP5 WPP20G is a rhombic 80° turning insert designed for efficient steel machining, featuring Tiger·tec Gold coating and an RP5 chipbreaker for reliable chip control. Tiger·tec Gold coated carbide RP5 chipbreaker for controlled chips 80° rhombic shape for stable cuts 2.4 mm corner radius for robustness Consistent performance for steel machining The WPP20G grade, part of the Tiger·tec Gold series, has been developed for productive turning of steel (ISO P). Its coated carbide composition provides high wear resistance, which translates into longer tool life and fewer indexings during multi-shift production. The RP5 chipbreaker is optimised for medium-depth cuts and promotes predictable chip shapes, reducing manual chip handling and downtime. For process planners, this combination means improved tool economy and consistent component quality across batches. Geometry that supports productivity and reliability The 80° rhombic shape and 0° negative rake geometry deliver a balanced mix of strength and versatility. The rhombic form gives axial security for a wide range of cutting depths, while the negative rake increases edge robustness for interrupted cuts and harder turning conditions. The 2.4 mm corner radius increases resistance to edge chipping and contributes to stable surface finish when paired with correct feeds and speeds. In practical terms, this geometry allows the tool to be used for both finishing and light roughing with fewer insert changes. Coating and materials: what the technology does for the part The Tiger·tec Gold coating on this coated carbide grade reduces abrasive wear and improves thermal stability during elevated cutting temperatures. For operations on unalloyed or alloyed steel, the coating minimises flank wear and helps maintain dimensional accuracy over longer tool life. The WPP20G chemistry balances toughness and hardness—suitable for typical heat generation and chip formation encountered in steel turning. Understanding these material properties helps production engineers choose cutting parameters that extend tool life while ensuring repeatable part quality. Practical application and process guidance In a production setting, the insert is well suited to general turning cycles where reliability and repeatable results are priorities. Use the RP5 chipbreaker when seeking consistent, curled chips for safe evacuation in automated environments; switch to conservative feeds during initial process trials to verify part finish and machine dynamics. As the grade is optimised for steel, expect good performance across a broad range of steels used in everyday manufacturing. For integration into an existing cell, document the achieved cutting data and review tool life over several batches to establish an economical replacement interval. Contact Metav Werkzeuge today to discuss integrating the Walter Tools CNMG250924-RP5 WPP20G into production or to request tailored cutting data from our consultants: info@metav-werkzeuge.com, +49 2822 7131930 Technical data SKU: CNMG250924-RP5-WPP20G-WALTER Designation: CNMG250924-RP5 WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: RP5 Facts Corner radius: 2.4 mm Inscribed circle / Size: 25 Free angle: 0° (negative) Thickness code: 09 Tolerance class: M Special features Rhombic 80° shape Coated carbide (Tiger·tec Gold) Application: Steel (ISO P) Negative rake geometry Robust corner for mixed turning tasks FAQ What materials is this insert suitable for? The CNMG250924-RP5 WPP20G is designed primarily for steel (ISO P) applications; its WPP20G grade and Tiger·tec Gold coating suit the heat and chip formation typical of steel turning. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker produces controlled chip shapes that simplify evacuation and reduce manual chip handling; combined with the coated grade, it contributes to stable cutting in serial production. What does the 0° negative rake mean for cutting conditions? A 0° negative rake provides a stronger cutting edge suited to interrupted cuts and tougher conditions; it increases edge stability compared with positive rake geometries. Is this insert suitable for finishing operations? Yes—with appropriate feeds and speeds the rhombic 80° geometry and 2.4 mm corner radius deliver acceptable surface finishes for many finishing tasks while offering robust edge life. Can the CNMG250924-RP5 WPP20G be used on automated lathes? The insert’s stable chip control and predictable performance under the Tiger·tec Gold system make it appropriate for automated turning cells where repeatability and tool life are important. Walter Tools; Walter AG, Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for clarification purposes only and do not imply any affiliation with Metav Werkzeuge. The offered article is an original, factory-new product of the manufacturer.
CNMG250924-RP7 WKP30S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, the RP7 chipbreaker and a rhombic 80° geometry to achieve consistent, productive turning in steel and cast iron; order through Metav Werkzeuge or contact our consultants for machining recommendations. CNMG250924-RP7 WKP30S — turning insert CNMG250924-RP7 WKP30S for steel and cast iron, Tiger·tec Silver (Walter Tools) The CNMG250924-RP7 WKP30S is a rhombic 80° turning insert designed for stable medium and finishing cuts in steel (P) and cast iron (K), offering a balanced mix of wear resistance and chip control. Tiger·tec Silver coating for improved wear resistance Rhombic 80° geometry with 0° negative rake 2.4 mm corner radius for stable machining Optimised for steel (P) and cast iron (K) Consistent tool life through advanced coating technology The Tiger·tec Silver series combines a high-performance coated carbide substrate with a multilayer finish to reduce flank and crater wear under typical turning conditions. This grade, WKP30S, is formulated for the thermal and mechanical demands of machining steel and cast iron and delivers a measurable improvement in process reliability. The coating reduces friction at the tool–workpiece interface and, when paired with the RP7 chipbreaker, supports controlled chip formation; the result is extended edge life and fewer unscheduled insert changes during production cycles. Geometry engineered for repeatable, secure cutting The rhombic 80° profile and 0° negative rake create a robust cutting edge that reacts predictably under radial loads. The relatively large 2.4 mm corner radius increases edge strength and improves surface finish when light to moderate feed rates are applied, while the RP7 chipbreaker promotes short, manageable chips for continuous turning. For setups where stability and repeatability matter, this geometry reduces vibration and helps maintain dimensional accuracy, especially in repetitive series production. Productivity benefits and application recommendations Selected for use on a wide range of steels and cast irons, the insert provides a pragmatic balance between economy and machining performance. The combination of the WKP30S grade and the insert geometry supports higher material removal rates with reliable edge behaviour, so cycle times can be improved without compromising component quality. When specifying tools, consider matching the insert to a suitable toolholder and setting cutting parameters according to the workpiece material group (P or K) listed in ISO 513 to achieve the best result; a conservative start-up speed and progressive feed adjustment will confirm optimal conditions for each application. Contact Metav Werkzeuge for tailored cutting data and sample availability for Walter Tools turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 to request application-specific recommendations Technical data Article number: CNMG250924-RP7-WKP30S-WALTER Product label: Drehwendeschneidplatte CNMG250924-RP7-RP7 WKP30S Walter Tools Series: Tiger-tec Silver Grade: WKP30S Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Tolerance class: M Facts Inscribed circle / size: 25 mm Corner radius: 2.4 mm Thickness: 09 Free angle: 0° (negative) Chipbreaker: RP7 Special features Coating technology: Tiger·tec Silver Substrate: coated carbide Geometry: Rhombus 80° Material suitability: steel (P) and cast iron (K) Execution: G FAQ What materials is this insert suited for? The CNMG250924-RP7 WKP30S from Walter Tools is optimised for machining steel (ISO group P) and cast iron (ISO group K), reflecting the intended application of the WKP30S grade. Which chip shape can be expected with the RP7 chipbreaker? The RP7 chipbreaker encourages short, segmented chips suitable for continuous turning operations; this improves process safety and reduces the risk of chip entanglement with the tool or workpiece. Is this insert suitable for heavy roughing cuts? The rhombic 80° geometry and 2.4 mm corner radius give good edge strength, but CNMG250924-RP7 WKP30S is best applied to medium and finishing operations; for very heavy roughing, a dedicated roughing geometry may be preferable. How does the Tiger·tec Silver coating affect performance? The Tiger·tec Silver coating on the WKP30S grade lowers friction and improves resistance to thermal and abrasive wear, which extends usable tool life and supports consistent surface quality over longer tool lives. Which toolholder types are compatible with this insert designation? Insert designation CNMG250924-RP7 corresponds to standard toolholders accepting CNMG geometry; ensure correct clamping and seat support according to the toolholder manufacturer’s guidance for secure and repeatable performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory reasons. There is no connection between our company and the mentioned brands. The offered item is original factory-new goods of the manufacturer.
CNMG250924-RP7 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the RP7 chipbreaker for reliable chip control and consistent tool life when machining Stahl; order the insert directly via Metav Werkzeuge or ask consultants for application advice. CNMG250924-RP7 WPP20G Turning insert — Rhombic 80° geometry, for Stahl, Walter Tools CNMG250924-RP7 WPP20G is a coated carbide turning insert designed for general-purpose turning of Stahl with a focus on stable chip formation and extended tool life Tiger·tec Gold coating for durability Optimised RP7 chipbreaker for stable chips Rhombic 80° insert geometry, 2.4 mm radius Designed for machining Stahl, negative 0° relief Increased process stability through advanced coating and chip control The combination of the Tiger·tec Gold coating and the WPP20G grade offers a measurable advantage in durability and wear resistance when machining Stahl. The coating reduces flank and crater wear under typical turning conditions, extending the service interval and improving economy per part. The RP7 chipbreaker is engineered to produce predictable, short chips on a wide range of workpiece grades, reducing bail-out times and helping to maintain uninterrupted production. For operators and CAM programmers, this means fewer interruptions and a lower risk of tool-related scrap. Geometry and edge design deliver consistent surface quality The Rhombic 80° shape combined with a 2.4 mm corner radius and 0° (negative) relief ensures secure clamping in standard toolholders and robust cutting edges for medium to heavy cuts. The corner radius provides a balance between edge strength and surface finish, so lighter finishing passes achieve good results while heavier roughing cuts remain stable. The geometry also supports reliable insert indexing and repeatable part dimensions, which improves process control on batch production and supports predictable cycle times. Clear material suitability and practical benefits for workshop use Assigned to material group P, the grade is tuned specifically for Stahl applications, accommodating typical heat generation and chip behaviour in this group. As a coated carbide insert, it combines toughness and wear resistance suited to a broad range of unalloyed and alloyed Stahl grades. The nominal plate designation supports straightforward ISO-based selection and tool management: the insert is easy to identify in assortments and to match with appropriate holders and cutting data tables. This clarity reduces setup time and simplifies tool inventory in production environments. Request a tailored cutting-data recommendation for the Walter Tools CNMG250924-RP7 WPP20G insert via Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the optimal application for your machining task Technical Data SKU: CNMG250924-RP7-WPP20G-WALTER Article designation: CNMG250924-RP7 ISO designation: CNMG250924-RP7 WPP20G Product type: Turning insert Manufacturer: Walter Tools Facts Shape angle: Rhombus 80° Size: 25 mm Corner radius: 2.4 mm Relief angle: 0° (negative) Thickness code: 09 Special features Series: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: RP7 Application group: P (Stahl) Execution: G Tolerance class: M FAQ Is this insert suitable for general turning of Stahl? The CNMG250924-RP7 WPP20G insert from Walter Tools is designed for material group P and is suitable for a wide range of Stahl turning tasks thanks to the Tiger·tec Gold coating and RP7 chipbreaker. What benefits does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WPP20G grade improves wear resistance and heat management during turning, which helps extend tool life and maintain consistent surface quality when machining Stahl. How does the RP7 chipbreaker affect machining? The RP7 chipbreaker produces controlled, short chips across typical cutting conditions, improving chip evacuation and process security for the Walter Tools insert. Can the insert be used for both roughing and finishing? Yes; the Rhombic 80° geometry and 2.4 mm corner radius offer a compromise between edge strength for roughing and the capability to achieve acceptable finishes during finishing passes on Stahl. How is the insert identified for tool management? Identification follows ISO designation CNMG250924-RP7 WPP20G and the SKU CNMG250924-RP7-WPP20G-WALTER, which simplifies matching to holders and cutting-data charts. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no association between our company and the named brands. The offered item is an original factory-new product of the manufacturer, here Walter Tools.
CNMM120408-HU3 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Gold coating and the WPP10G grade for longer tool life and reliable chip control in steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CNMM120408-HU3 CNMM120408-HU3 WPP10G Turning Insert — Tiger‑tec Gold for Steel | Walter Tools CNMM120408-HU3 WPP10G is a precision turning insert designed for robust steel machining, offering consistent chip formation and extended service life for series production. Tiger‑tec Gold coated for extended life Optimised HU3 chipbreaker for stable chips Rhombic 80° form with 0.8 mm corner radius Negative 0° rake for robust cutting Higher process efficiency through optimised coating and grade The combination of the Tiger‑tec Gold coating and the WPP10G carbide grade provides improved resistance to abrasive wear while maintaining toughness for interrupted cuts. This formulation is particularly beneficial in steel applications, as the coating supports stable chip control and reduces flank wear, which translates into longer tool life and fewer tool changes. The result is a measurable improvement in machine uptime and a lower cost per part in medium- to high-volume production. Precise chip control and geometry for predictable results The insert’s HU3 chipbreaker and rhombic 80° geometry deliver consistent chip formation under varying cutting conditions. The controlled chip flow reduces the likelihood of built-up edge and improves surface finish on turned components. With a 0.8 mm corner radius and a negative 0° rake, the design prioritises robustness and repeatability, making it well suited to roughing passes and stable finishing operations where repeatability is required. Versatility for common steel applications Manufactured for use on steels (material group P), the insert is tuned to the thermal and mechanical characteristics typical of unalloyed and alloyed steels. The grade balance between wear resistance and toughness enables reliable performance across a broad range of steel grades and cutting conditions. For shops seeking a single indexable solution for many turning tasks, this insert minimises tool inventory complexity while ensuring consistent performance. Simple integration into standard tool holders and routines The insert matches conventional CNMM clamping systems and is compatible with standard turning setups, allowing easy introduction into existing production processes. The reliable geometry and coating reduce the need for process fine-tuning, enabling faster ramp-up on new parts. For production engineers, this means predictable machining parameters and reduced setup time, supporting continuous, efficient manufacturing. For reliable steel turning with extended tool life, contact Metav Werkzeuge to source the Walter Tools CNMM120408-HU3 WPP10G insert and request machining recommendations from our specialists. Technical data SKU: CNMM120408-HU3-WPP10G-WALTER Designation: CNMM120408-HU3 WPP10G Product type: Turning insert Core specifications Geometry: Rhombus 80° Corner radius: 0.8 mm Relief angle / rake: 0° (negative) Size: 12 Thickness code: 04 Tolerance class: M Materials & features Grade / coating: WPP10G — Tiger‑tec Gold coated carbide Chipbreaker: HU3 Suitable material group: Steel (P) Execution: M Series: Tiger‑tec Gold FAQ Is this insert suitable for alloyed steels? The CNMM120408-HU3 WPP10G insert is specified for material group P, so it is suitable for unalloyed and alloyed steels where the Tiger‑tec Gold coating and the WPP10G grade help manage heat and wear during turning. Which chipbreaker should be chosen for mixed finishing and roughing? The HU3 chipbreaker on this Walter Tools insert is optimised for stable chip formation across roughing and finishing ranges, providing predictable chips and improved surface quality on steel. Can the insert tolerate interrupted cuts? Yes, the WPP10G grade offers a balance of toughness and wear resistance that supports interrupted cutting in steel, while the negative rake and 0.8 mm corner radius enhance robustness. How does the Tiger‑tec Gold coating affect tool life? The Tiger‑tec Gold coating improves resistance to abrasive wear and helps maintain edge stability, which typically leads to longer service life and more consistent component quality when turning steel. Is special clamping hardware required for this geometry? No special clamping hardware is necessary; the insert conforms to standard CNMM holder interfaces and can be integrated into common turning tool setups. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMM120408-HU3 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coated grade WPP20G and the HU3 chipbreaker for productive, repeatable steel turning; the negative 0° rake and 0.8 mm corner radius deliver stable cutting and consistent surface quality. Order the CNMM120408-HU3 WPP20G turning indexable insert directly via Metav Werkzeuge or contact our consultants for application advice. CNMM120408-HU3 WPP20G turning indexable insert, Tiger·tec Gold coating, HU3 chipbreaker — Walter Tools A CNMM120408-HU3 WPP20G insert engineered for steel turning, combining Tiger·tec Gold coated carbide and an HU3 chipbreaker to support consistent chip control and productive machining. Tiger·tec Gold coated carbide for long life HU3 chipbreaker for controlled chip formation Rhombic 80° geometry for versatile turning 0.8 mm corner radius for stable cutting Reliable performance for demanding steel turning The combination of the Tiger·tec Gold coating and the WPP20G grade provides a balanced response to the typical heat and chip formation encountered in steel machining. The coating technology increases abrasive resistance, which translates into longer tool life and fewer interruptions for index changes. Specified as suitable for the material group P (steel), the insert is optimised for unalloyed and alloyed steels, offering a stable compromise between wear resistance and edge toughness that supports higher productivity in series production. Consistent chip control and surface integrity The HU3 chipbreaker is designed for controlled chip formation in medium to heavy cuts, reducing the risk of long, stringy chips and improving operator safety. Combined with the rhombic 80° geometry and a 0.8 mm corner radius, the design promotes a predictable cutting force and a robust cutting edge. The negative 0° free angle contributes to a stronger cutting geometry for interrupted cuts or tougher operations, resulting in consistent surface quality and reduced rework. Process reliability and application guidance With a tolerance class of M and the Tiger·tec Gold series background, the insert supports repeatable performance in production environments where stability is essential. The specification CNMM120408-HU3 defines the geometry and fitment for standard tool holders, enabling quick integration into existing toolsets. For machining strategies that favour longevity and predictable tool behaviour, this grade and chipbreaker combination from Walter Tools helps to reduce process variability and maintain cycle-time targets. For precise application recommendations and to ensure the CNMM120408-HU3 WPP20G is specified correctly for a given turning task, contact Metav Werkzeuge for machining parameter guidance and material-matched advice. Technical data SKU: CNMM120408-HU3-WPP20G-WALTER Article: CNMM120408-HU3 WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Core specifications Size: 12 Thickness: 04 Corner radius: 0.8 mm Free cutting angle: 0° (negative) Geometry: Rhombic 80° Design and applications Grade: WPP20G Chipbreaker: HU3 Coating technology: Tiger·tec Gold Material suitability: Steel (P) Tolerance class: M Designation: CNMM120408-HU3 FAQ What materials is this insert suitable for? The CNMM120408-HU3 WPP20G is specified for the ISO material group P, meaning it is suitable for machining unalloyed and alloyed steel grades. How does the HU3 chipbreaker affect machining? The HU3 chipbreaker on the CNMM120408-HU3 WPP20G promotes controlled chip formation, improving chip evacuation and helping to achieve stable cutting conditions in steel turning. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating increases wear resistance and edge stability, which extends tool life and helps maintain consistent surface finish during extended production runs. Is the insert suitable for interrupted cuts or roughing? The negative 0° free angle and the 0.8 mm corner radius give the insert robust cutting geometry, making the CNMM120408-HU3 WPP20G appropriate for tougher operations and situations with occasional interruptions. Which tool holders accept this insert designation? The CNMM120408-HU3 designation corresponds to standard turning insert geometry and fits compatible tool holders designed for CNMM-format rhombic 80° inserts. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMM120408-HU3 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of high process security, stable chip control and prolonged tool life offered by the Tiger·tec Gold grade; order the inserts directly via Metav Werkzeuge or request application advice from our consultants for seamless integration into production. CNMM120408-HU3 CNMM120408-HU3 WPP30G Turning insert for steel (P) — Tiger·tec Gold by Walter Tools The CNMM120408-HU3 WPP30G is a rhombic 80° turning insert with Tiger·tec Gold coating, designed for productive steel machining and reliable chip control. Tiger·tec Gold coated carbide grade WPP30G HU3 chipbreaker for dependable chip control Rhombic 80° shape with 0.8 mm corner radius 0° negative rake for stable, heavy cuts Optimised coating and substrate for efficient steel machining The combination of the Tiger·tec Gold coating and a coated carbide substrate provides a balanced performance specifically for ISO P applications — that is, machining unalloyed and alloyed steel. The coating reduces friction and thermal load at the cutting zone, which improves tool life and enables higher cutting parameters without sacrificing surface quality. In production terms, this means fewer tool changes, longer uninterrupted runtimes and more consistent component quality. The insert grade is tuned to the thermal and chip-formation behaviour typical for steel, offering a reproducible and cost‑efficient cutting process. Geometry and chip management that increase productivity The insert’s HU3 chipbreaker paired with a rhombic 80° geometry and a 0.8 mm corner radius delivers consistent chip formation and evacuation. The 0° negative rake contributes to a robust cutting edge that resists chipping under interrupted cuts and heavy feeds, supporting stable cycle times. These geometric features directly translate into improved surface finish and dimensional stability on turned parts, especially in medium to heavy‑duty operations where chip control and edge strength are decisive for uptime. Practical application notes and selection guidance This turning insert is suitable for a wide range of steel turning tasks within the ISO P group; the grade WPP30G provides a balance between wear resistance and toughness, making it a versatile choice in mixed production environments. The tolerance class M indicates standard dimensional accuracy for general turning operations. When selecting an insert geometry or corner radius for a specific job, consider the required surface finish and the feed rates: the 0.8 mm corner radius is effective for general finishing to medium turning, while the HU3 chipbreaker helps maintain consistent chip segments across variable cutting depths. For specific machining strategies or parameter recommendations, Metav Werkzeuge can supply trial data and application tables. Contact Metav Werkzeuge for individual cutting data and procurement of Walter Tools Tiger·tec Gold inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the CNMM120408-HU3 WPP30G and suitable process settings Technical data Article number: CNMM120408-HU3-WPP30G-WALTER Label: Drehwendeschneidplatte CNMM120408-HU3 WPP30G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Facts Plate size: 12 Plate thickness: 04 Corner radius: 0,8 Clearance angle: 0° (negativ) Shape: Rhombus 80° Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP30G Chipbreaker: HU3 Substrate/coating: coated carbide Material application: Steel (ISO P) FAQ What materials is this insert suited for? The CNMM120408-HU3 WPP30G is designed for machining materials in the ISO P group, primarily unalloyed and alloyed steel, and the grade WPP30G balances wear resistance and toughness for these steels. How does the HU3 chipbreaker affect machining performance? The HU3 chipbreaker provides reliable chip segmentation and evacuation, improving process stability and reducing the risk of chip interference during turning operations with this Walter Tools insert. What is the advantage of the 0° negative rake? A 0° negative rake increases cutting edge strength and resistance to shock, making the insert suitable for heavier cuts and intermittent cutting conditions while maintaining dimensional consistency. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and product names remain the property of their respective owners. Mark names are used for descriptive purposes only. The offered item is an original, factory‑new product of the manufacturer.
CNMM120408-HU5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold performance, a reliable HU5 chipformer and robust geometry for consistent machining of stainless steel; order the CNMM120408-HU5 WMP20G turning insert directly via Metav Werkzeuge or ask the consultants for tailored advice. CNMM120408-HU5 WMP20G — Turning insert, rhombic 80° with 0.8 mm nose radius, Walter Tools, for stainless steel The CNMM120408-HU5 WMP20G is a rhombic turning insert engineered for stable, repeatable cutting of stainless steel in medium to robust applications; it combines a coated carbide grade with a dedicated chipformer to support secure chip control and extended edge life. Tiger·tec Gold coated carbide grade WMP20G Optimised chipformer HU5 for stable chip control Rhombic 80° insert with 0.8 mm nose radius Negative 0° relief angle for robust cutting Reliable performance for stainless steel turning The combination of the Tiger·tec Gold coating and the WMP20G carbide formulation gives the insert a balanced resistance to abrasion and built-up edge, which is essential when machining stainless steel, a material prone to toughness and heat generation. The coated microstructure reduces friction at the cutting zone and helps maintain a durable cutting edge, so cycle times remain consistent and downtime for tool changes is reduced. This leads to a measurable improvement in process stability and predictable component quality. Consistent chip control and secure cutting conditions Equipped with the HU5 chipformer, the indexable insert provides reliable chip segmentation and evacuation under a wide range of cutting parameters. The chipformer geometry is tailored for the ductile behaviour of stainless steels, supporting controllable chips that reduce the risk of entanglement and minimise surface damage. Combined with the negative 0° relief angle, the insert is suited to interrupted cuts and variable depths of cut, offering confidence in tougher production environments. Geometry that supports accuracy and surface integrity The rhombic 80° shape and 0.8 mm nose radius merge versatility and precision: the geometry allows adaptable cutting orientations while the nose radius balances strength and finish. For components where surface integrity matters, this geometry helps achieve consistent finish grades without compromising tool life. The insert’s form factor also facilitates predictable toolpath planning and straightforward index changes, contributing to overall machining efficiency. Practical benefits for workshop productivity Using this grade and geometry reduces the frequency of rework and stabilises cycle times, which positively affects throughput and cost per part. The insert’s characteristics make it a pragmatic choice for job shops and production lines that require both productivity and repeatability when machining stainless steel. Technical teams benefit from clearer machining windows, and production planners gain from the repeatable life and consistent edge performance of this grade. For dependable stainless steel turning with Walter Tools’ Tiger·tec Gold WMP20G grade, contact Metav Werkzeuge for technical guidance or ordering — email info@metav-werkzeuge.com or call +49 2822 7131930 for assistance and specification support Technical data Article number: CNMM120408-HU5-WMP20G-WALTER Label: Drehwendeschneidplatte CNMM120408-HU5 WMP20G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Facts Insert dimension: 12 Plate thickness: 04 Nose radius: 0.8 Relief angle: 0° (negativ) Special features Series: Tiger-tec Gold Grade: WMP20G (coated carbide) Chipformer: HU5 Shape: Rhombus 80° Application: stainless steel (M) FAQ What materials is this insert suitable for? The CNMM120408-HU5 WMP20G insert is specified for stainless steel applications; the WMP20G grade and HU5 chipformer support secure chip formation when machining these materials. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating on the WMP20G grade reduces friction and improves wear resistance, which enhances tool life and helps maintain consistent cutting conditions for stainless steel turning. What advantages does the HU5 chipformer provide? The HU5 chipformer offers optimised chip control for ductile materials, producing segmented chips that are easier to evacuate and that protect surface quality during machining. Is this insert suitable for interrupted cuts? Yes; the negative 0° relief angle and robust geometry make the insert appropriate for interrupted cuts and variable engagement conditions. Manufacturer: Walter Tools; Walter AG, headquartered in Tübingen, Germany — Protected trademarks and trade names remain the property of their respective owners. Mention of brand names is for explanatory purposes only and does not imply any association with Metav Werkzeuge. The offered item is original, factory-new product of the manufacturer.
CNMM120408-HU5 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Silver coating and an HU5 chipbreaker for reliable chip control and edge stability in stainless steel turning; the rhombic 80° geometry with a 0.8 mm corner radius further extends tool life and process security. Order the CNMM120408-HU5 WMP20S directly via Metav Werkzeuge or ask our consultants if needed. CNMM120408-HU5 WMP20S — Indexable turning insert (Rhombic 80°, 0.8 mm) by Walter Tools The CNMM120408-HU5 WMP20S is an indexable turning insert engineered for robust machining of stainless steels under moderate to heavy cutting conditions. Tiger·tec Silver coated for stable edges Optimised HU5 chipbreaker for secure chip control Rhombic 80° geometry for versatile turning 0.8 mm corner radius for durable tool life High process reliability through advanced coating and grade The combination of the Tiger·tec Silver coating and the WMP20S cemented carbide grade provides consistent performance when machining stainless steel. The coating reduces friction and helps maintain a stable cutting edge at elevated temperatures, which minimises the risk of built-up edge and enhances surface finish. As an indexable insert, this part offers repeatable positioning and predictable wear behaviour, translating into fewer tool changes and improved machine uptime — a clear rational advantage for production-focused environments. Geometry and chip control that protect cycle time The insert’s rhombic 80° shape and integrated HU5 chipbreaker are designed to promote reliable chip formation and evacuation when cutting tough, ductile stainless steels. The 0.8 mm corner radius gives a strong cutting edge that resists chipping under moderate interruption or heavier cuts, while the 0° (negative) rake supports robust engagement and dimensional stability. These technical choices align to reduce unscheduled stoppages and maintain consistent cycle times, supporting predictable throughput and cost-efficiency. Practical benefits for workshop integration and part quality With a focus on process security and ease of handling, the CNMM120408-HU5 WMP20S insert simplifies tool inventory thanks to its standard ISO designation and familiar geometry. The optimised chip control lowers thermal loading at the edge, which helps achieve more consistent surface quality and lengthens time between tool indexings. For engineering teams that prioritise reproducibility and low rework rates, this insert contributes directly to reduced scrap and higher first-pass yield, reinforcing both operational and quality objectives. For tailored application advice or to secure appropriate Walter Tools Tiger·tec Silver inserts for specific stainless steel grades, contact Metav Werkzeuge for expert guidance and rapid availability Technical data SKU: CNMM120408-HU5-WMP20S-WALTER Article number: CNMM120408-HU5 ISO designation: CNMM120408-HU5 WMP20S Brand: Walter Tools Series: Tiger·tec Silver Facts Size: 12 mm Corner radius: 0.8 mm Rake angle: 0° (negative) Plate form: Rhombic 80° Tolerance class: M Execution: M Plate thickness: 04 Special features Coating: Tiger·tec Silver Grade: WMP20S (coated carbide) Chipbreaker: HU5 Suitable for: stainless steels (M) Designed for stable chip formation and robust edge life FAQ What materials is this insert suitable for? The CNMM120408-HU5 WMP20S indexable turning insert from Walter Tools is specified for stainless steel machining (ISO group M) and is optimised for safe chip formation and edge stability. How does the HU5 chipbreaker affect performance? The HU5 chipbreaker on this Walter Tools insert improves chip control and evacuation, which reduces heat buildup at the cutting edge and contributes to longer, more consistent tool life for the CNMM120408-HU5 WMP20S. What are the key geometry benefits of the rhombic 80° form? The rhombic 80° geometry provides versatility in turning applications, offering stable cutting engagement and good accessibility for shoulder and profile work with the CNMM120408-HU5 WMP20S insert. Can this insert handle interrupted cuts and heavier feeds? Yes, the negative rake and a 0.8 mm corner radius make the CNMM120408-HU5 WMP20S resilient under interruption and moderate heavy cutting, helping to protect the edge and maintain dimensional stability. Is the Tiger·tec Silver coating suitable for elevated cutting temperatures? The Tiger·tec Silver coating on this Walter Tools grade reduces friction and enhances heat resistance, supporting consistent performance at higher cutting temperatures typical when machining stainless steel. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
CNMM120408-HU5 WPP10G Wendeplatten - Walter Tools
High-performance Tiger·tec Gold technology and a 0.8 mm corner radius provide durable, repeatable cuts; the HU5 chipbreaker supports reliable chip control in Stahl turning. Benefit from the combination of coated carbide longevity, stable geometry and the rhombic 80° form for versatile turning tasks — order the insert directly via Metav Werkzeuge or consult our specialists for application-specific cutting data. CNMM120408-HU5 WPP10G — Tiger·tec Gold turning insert, rhombic 80° for Stahl CNMM120408-HU5 WPP10G is a coated turning insert from Walter Tools, engineered for robust medium‑duty to finishing operations in Stahl machining. Tiger·tec Gold coating for enhanced wear resistance Optimised HU5 chipbreaker for reliable chip control Rhombic 80° shape for versatile turning operations 0.8 mm corner radius for stable, repeatable cuts Consistent performance through advanced coating technology The CNMM120408‑HU5 WPP10G combines Tiger·tec Gold surface engineering with a coated carbide substrate to extend tool life under the heat and mechanical loads typical of Stahl machining. The WPP10G grade is developed for a balanced mix of wear resistance and toughness, supporting longer tool life and fewer interruptions for insert changes. This results in improved process stability and predictable tool‑change intervals on the shop floor. Geometry that stabilises cutting and chip flow The rhombic 80° geometry and 0.8 mm corner radius create a stable cutting edge that helps deliver consistent surface finish and dimensional control. The negative 0° clearance geometry increases edge strength for interrupted cuts and heavier engagement, while the chipbreaker HU5 is tuned to produce short, manageable chips when cutting Stahl. Together, these features reduce the risk of edge chipping and simplify chip handling in automated and manual turning operations. Productivity and manufacturability advantages Designed for versatile turning tasks, the insert’s balance of wear resistance and toughness supports higher metal removal rates where process reliability matters. The coated grade and robust geometry lower the frequency of insert replacements, improving uptime and contributing to a more efficient production rhythm. Where cycle-time optimisation and consistent part quality are priorities, this insert helps harmonise process reliability with predictable tool life. Practical compatibility and shop‑floor integration With a nominal size of 12 and thickness "04", the insert fits standard CNMM toolholders that accept rhombic 80° indexable plates. Tolerance class M and execution M indicate consistent manufacturing accuracy, which supports repeatable clamping and predictable performance. The designation aligns with ISO P (Stahl) recommendations, making it straightforward to select cutting parameters based on common Stahl cutting data and the toolholder system in use. Contact Metav Werkzeuge for tailored cutting data and selection support for Walter Tools Tiger·tec Gold inserts such as the CNMM120408‑HU5 WPP10G — our specialists provide application advice and can assist with optimisation; eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930 Technical data SKU: CNMM120408-HU5-WPP10G-WALTER Article designation: CNMM120408-HU5 WPP10G Product type: Drehwendeschneidplatte Series: Tiger·tec Gold Grade: WPP10G Manufacturer: Walter Tools Dimensions & core data Size: 12 Thickness: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Shape: Rhombus 80° Chipbreaker: HU5 Tolerance class: M Execution: M Materials & features Coated carbide grade WPP10G Coating technology: Tiger·tec Gold Suitable for: P (Stahl) Chip control: HU5 Series description: designed for wear resistance and reliable chip formation FAQ Is this insert suitable for machining stainless steel? The CNMM120408‑HU5 WPP10G is specified for P (Stahl) materials; suitability for rostfreier Stahl is not indicated in the provided data and therefore cannot be assumed. What advantages does Tiger·tec Gold offer? Tiger·tec Gold provides a multi‑layer surface system on the coated carbide substrate that improves wear resistance and thermal stability, which in the CNMM120408‑HU5 WPP10G leads to longer edge life during Stahl turning. What cutting behaviour can be expected from the HU5 chipbreaker? The HU5 chipbreaker on this insert is optimised for controlled chip formation in Stahl, producing chips that are easier to manage and reducing the risk of entanglement during continuous turning operations. Which operations and holders are compatible with this insert? The rhombic 80° form and CNMM format suit a wide range of turning applications, from medium‑duty to finishing, and are compatible with standard toolholders designed for CNMM indexable inserts; ensure holder compatibility with the size "12" and thickness "04". What are the key dimensions and identification details for ordering? Key specs: size 12, corner radius 0.8 mm, rhombic 80°, relief angle 0° (negative), chipbreaker HU5; SKU CNMM120408‑HU5‑WPP10G‑WALTER identifies the Walter Tools insert and its WPP10G grade. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world's leading manufacturers of precision cutting tools for metalworking. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used here for explanatory purposes only and do not imply any affiliation with Metav Werkzeuge.
CNMM120408-HU5 WPP20G WPP20G Wendeplatten - Walter Tools
High-performance machining results from the combination of Tiger·tec Gold coating and a purpose-designed HU5 chipbreaker, delivering consistent productivity and predictable tool life in steel turning; order directly via Metav Werkzeuge or consult the technical team for application support. CNMM120408-HU5 WPP20G turning indexable insert for steel — Walter Tools The CNMM120408-HU5 WPP20G is a rhombic 80° turning insert with a negative 0° relief angle, designed for efficient ISO P (steel) machining where stable chip formation and high productivity are required. Tiger·tec Gold coated carbide for high productivity Optimised HU5 chipbreaker for reliable chip control Rhombic 80° insert with 0.8 mm corner radius Negative 0° clearance for secure edge support Consistent productivity for steel turning operations The coated carbide grade used in this insert is engineered for a broad range of steel applications and is part of the Tiger·tec Gold series, which delivers a balance of wear resistance and toughness. Because the grade is formulated for the heat and chip behaviour typical of steel cutting, cycle times can be reduced while maintaining repeatable tool life. This geometry is especially suitable for shops seeking a robust, universal cutting solution that combines durability with stable performance. Controlled chips and stable cutting edge for predictable results The integrated HU5 chipbreaker ensures controlled chip formation across a variety of cutting conditions, reducing the risk of entangling chips and improving surface quality. The rhombic 80° geometry and 0° clearance provide a secure support for the cutting edge, while the corner radius 0.8 mm helps to distribute cutting forces and delay flank wear. These features result in smoother feeds, fewer interruptions for chip clearing and a more consistent finish on turned components. Seamless integration and selection guidance for production use Insert designation CNMM120408 indicates compatibility with standard toolholders for CNMM-style seats; the execution and tolerance class "M" ensure interchangeability in production setups. The WPP20G grade is optimised for steel (ISO P), making it a practical choice for general turning, medium stock removal and finishing passes where a universal, cost-effective coated carbide is preferred. For process planning, assess feed and depth values with the chipbreaker behaviour in mind to exploit the full benefit of the coating and geometry. Contact Metav Werkzeuge for tailored machining recommendations on Walter Tools Tiger·tec Gold inserts and assistance with selecting the right CNMM insert for specific steel applications Technical data Article number: CNMM120408-HU5-WPP20G-WALTER Designation: CNMM120408-HU5 WPP20G Manufacturer: Walter Tools Product type: Turning indexable insert Core dimensions Inscribed circle / size: 12 mm Thickness: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Geometry: Rhombus 80° Special features Coating/series: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: HU5 Application: Steel (ISO P) Execution: M Tolerance class: M FAQ Which materials is this insert suitable for? This insert is designed for ISO P applications and is optimised for machining a range of steels using the WPP20G grade. Is the CNMM120408-HU5 WPP20G coated and what benefit does that provide? The WPP20G grade is a Tiger·tec Gold coated carbide; the coating improves wear resistance and process stability in steel turning. What geometry and edge preparation does the insert have? The insert features a rhombic 80° shape, 0° relief (negative) and a 0.8 mm corner radius, providing secure edge support and improved force distribution. Which toolholders are compatible with this insert? The CNMM designation indicates compatibility with holders designed for CNMM 120408 inserts; ensure the seat and clamping match the CNMM form for correct assembly. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes and do not imply any affiliation between our company and the named manufacturers.
CNMM120408-HU5 WSM20S WSM20S Wendeplatten - Walter Tools
The combination of a Tiger·tec Silver coated carbide grade and a robust 0.8 mm corner radius delivers secure chip control and long cutting-edge life when machining stainless steel and heat-resistant alloys; order directly via Metav Werkzeuge or consult the team for application-specific cutting data. CNMM120408-HU5 WSM20S indexable turning insert — Tiger·tec Silver for stainless steel and superalloys (Walter Tools) The CNMM120408-HU5 WSM20S is a rhombic 80° indexable turning insert engineered for heavy-duty machining of stainless steel (ISO M) and heat-resistant superalloys/titanium (ISO S), combining a Tiger·tec Silver coating with a HU5 chipbreaker for stable cutting. Coated carbide Tiger·tec Silver for longevity Negative 0° rake for strong cutting edges 0.8 mm corner radius for edge robustness Rhombic 80° geometry for versatile turning Increased productivity through optimised coating and chip control The Tiger·tec Silver coating on the coated carbide substrate gives the insert high thermal resistance and improved wear performance, which supports longer tool life and fewer indexings in continuous production. The integrated HU5 chipbreaker promotes predictable chip control, reducing interruptions caused by tangled chips and improving cycle-time reliability. For operations on stainless steel and similar tough-to-machine materials, the combination of coating and chipbreaker translates into steadier cutting forces and a more consistent surface finish, directly supporting process stability and lower overall machining costs. Geometry designed for strength and versatile cutting performance The rhombic 80° shape and 0° (negative) clearance angle prioritise edge strength and deflection resistance, making this insert suitable for heavier cuts and interrupted turning. The 0.8 mm corner radius contributes to a robust cutting edge that tolerates increased radial depth of cut while maintaining dimensional repeatability. The thickness rating (04) and insert size (12) provide a stable seating in standard toolholders, which reduces vibration and supports reproducible results across serial production. These geometric attributes make the insert a practical choice where durable performance matters more than minimal cutting forces. Process efficiency and application-focused advantages Selected for stainless steel and demanding alloy work, the grade WSM20S balances wear resistance and toughness to handle both build-up edge tendencies and high-temperature exposure at the cutting zone. The insert’s specification supports reliable part finish and less rework, which improves throughput in batch or continuous manufacturing. Additionally, the Tiger·tec Silver series is designed for broad material coverage, helping to simplify tooling inventories and standardise tooling strategies across different workpiece families while maintaining process security. For tailored cutting parameters, toolholder recommendations and immediate supply of Walter Tools inserts, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific stainless steel or superalloy applications. Technical data SKU: CNMM120408-HU5-WSM20S-WALTER Designation: CNMM120408-HU5 WSM20S Brand: Walter Tools Series: Tiger-tec Silver Grade: WSM20S Execution: M Core data Insert shape: Rhombus 80° Inscribed circle / size: 12 mm Thickness: 04 Corner radius: 0.8 mm Clearance angle: 0° (negative) Chipbreaker: HU5 Special features Coating: Tiger·tec Silver Substrate: coated carbide Suitable for: stainless steel (ISO M); heat-resistant superalloys and titanium (ISO S) Application focus: heavy-duty turning, interrupted cuts, high-temperature alloys FAQ What materials is this insert intended for? The CNMM120408-HU5 WSM20S insert is specified for stainless steel (ISO M) and for heat-resistant superalloys and titanium (ISO S), providing a balance of heat resistance and edge stability. How does the HU5 chipbreaker affect machining? The HU5 chipbreaker promotes controlled chip formation and evacuation, improving process reliability and reducing downtime during operations with the CNMM120408-HU5 WSM20S insert. What is the benefit of the 0° negative clearance angle? A 0° negative clearance increases edge strength and resistance to chipping, making the insert suitable for heavier cutting conditions and interrupted cuts when using the CNMM120408-HU5 WSM20S. Can this insert be used in automatic machining centres? Yes, the insert’s coating and geometry are suited to automated turning applications where consistent tool life and surface quality are required with the CNMM120408-HU5 WSM20S. Is the CNMM120408-HU5 WSM20S part of a recognised product series? The insert belongs to the Tiger·tec Silver series, which is engineered for process reliability and broad material coverage in industrial turning tasks. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMM120408-HU5 WSM30S M Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WSM30S grade with the HU5 chipbreaker to achieve stable chip formation and reliable edge life when machining hard-to-cut alloys; order directly via Metav Werkzeuge or request application advice from our consultants. CNMM120408‑HU5 WSM30S indexable turning insert — Tiger‑tec Silver, Rhombic 80°, 0° negative clearance — Walter Tools A compact indexable turning insert CNMM120408‑HU5 WSM30S designed for robust turning of rostfreier Stahl and heat‑resistant superalloys in demanding production environments Tiger‑tec Silver coating for thermal stability Optimised HU5 chipbreaker for stable chips Rhombic 80° form with 0° negative clearance 12 mm inscribed size with 0.8 mm corner radius High performance on rostfreier Stahl and superalloys The WSM30S grade, integrated in the Tiger‑tec Silver family, is formulated for machining tough, heat‑sensitive materials where secure chip formation and edge stability are essential. With the designation CNMM120408‑HU5, the insert presents an inscribed size of 12 mm, a nominal thickness of 4.0 mm and a 0.8 mm corner radius, dimensions that support consistent contact with the workpiece and predictable wear behaviour. The coated carbide substrate improves thermal resistance and reduces tendency to build up material on the edge, which supports longer productive cutting intervals and fewer insert changes. This paragraph focuses on measurable performance advantages and material compatibility for process planners and toolroom engineers. Geometry and chip control for steady production The combination of the HU5 chipbreaker and the rhombic 80° form delivers dependable chip control and flexible approach angles for turning operations. The 0° negative clearance provides robust edge support and resistance to mechanical loading, which is particularly useful in interrupted cuts or unstable clamping conditions. The HU5 geometry promotes controlled chip segmentation in both continuous and semi‑continuous cuts, reducing the risk of chip entanglement and improving surface finish. For workshop supervisors and CNC programmers, these features translate into fewer stoppages and a more predictable machining cycle. Applications, process stability and economical use Engineered for the challenges of machining rostfreier Stahl and S‑class materials such as nickel‑based superalloys and titanium, this insert supports operations where heat generation and edge wear are limiting factors. The coated grade WSM30S emphasises thermal stability and consistent cutting behaviour, contributing to reliable dimensional accuracy and repeatability across batches. In practice, the insert is suitable for component turning in aerospace, energy and medical sectors where material strength and surface integrity are critical. By combining a proven coating technology with a stable chipbreaker and negative‑geometry design, the insert helps maintain throughput while protecting machine investment. For application guidance, availability and cutting‑data recommendations for Walter Tools Tiger‑tec Silver inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance and delivery options Technical data SKU: CNMM120408‑HU5‑WSM30S‑WALTER Article: CNMM120408‑HU5 WSM30S Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Inscribed size: 12 mm Thickness: 4.0 mm Corner radius: 0.8 mm Clearance angle: 0° (negative) Tolerance class: M Special features Chipbreaker: HU5 Grade: WSM30S (coated carbide) Form: Rhombic 80° Execution: M Applicable materials: rostfreier Stahl; superalloys / titanium Designation without grade: CNMM120408‑HU5 FAQ What materials is this insert intended for? The CNMM120408‑HU5 WSM30S insert is intended primarily for rostfreier Stahl and S‑class materials such as heat‑resistant superalloys and titanium, reflecting the WSM30S grade focus. How does the HU5 chipbreaker affect machining? The HU5 chipbreaker provides controlled chip formation and better evacuation in turning operations, which helps maintain surface quality and reduces machine interruptions when using the CNMM120408‑HU5 insert. What does the 0° negative clearance mean for tool setup? A 0° negative clearance indicates a robust negative‑geometry insert offering strong edge support; machine setup should account for this geometry in toolholder selection and feed settings to exploit the insert's stability. Which series and coating technology does this insert use? This insert belongs to the Tiger‑tec Silver series with the WSM30S coated carbide grade, offering enhanced thermal resistance and reliable cutting performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for clarification only; there is no affiliation between our company and the named manufacturers. The offered item is original, factory‑new merchandise of the stated manufacturer.
CNMM120412-HU3 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of high process stability and long tool life provided by the Tiger·tec Gold grade and robust negative geometry for reliable steel turning. The combination of a 1.2 mm nose radius and the HU3 chipbreaker ensures consistent chip control and productivity. Order the CNMM120412-HU3 WPP05G directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. CNMM120412-HU3 WPP05G — Rhombic 80° indexable turning insert, Tiger·tec Gold for steel by Walter Tools The CNMM120412-HU3 WPP05G is a rhombic 80° indexable turning insert engineered for precision steel machining, combining a coated carbide grade with a negative 0° rake for robust cutting performance Tiger·tec Gold coated carbide grade WPP05G Optimised for steel machining (ISO P) Rhombic 80° shape with 1.2 mm nose radius Negative 0° rake for robust chip control Consistent productivity and lower machining costs for steel turning The Tiger·tec Gold WPP05G grade delivers a balance of wear resistance and toughness that suits a wide range of steel applications (ISO P). The coated carbide construction reduces flank wear and extends the life of the cutting edge, which translates into fewer indexings and less tool changeover time. This results in measurable improvements to spindle uptime and cutting tool economy while maintaining stable component dimensions and repeatable results. Predictable chip formation and surface quality from optimised geometry The combination of the HU3 chipbreaker, a rhombic 80° form and a 1.2 mm nose radius produces reliable chip control and good surface finish on turning operations. The negative 0° free angle increases edge strength and favours controlled chip flow under interrupted or heavy cuts. For operations requiring dependable chip evacuation and consistent part appearance, this geometry reduces the risk of built-up edge and minimises rework. Practical integration and application guidance for workshop use Designed to the CNMM format, the insert thickness and form suit standard toolholders for indexable turning; the 04 thickness and the rhombic design support a range of depths of cut while maintaining secure clamping. As the grade is optimised for steel, it is suitable for unalloyed and alloyed steels that typically demand thermal and mechanical resilience from the insert. If further process data is required—such as recommended speeds, feeds or coolant practice—Metav Werkzeuge provides technical guidance to tailor parameters to the specific machine, material and productivity targets. For high-productivity steel turning applications, prefer the Walter Tools Tiger·tec Gold CNMM120412-HU3 WPP05G and contact Metav Werkzeuge for supply and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CNMM120412-HU3-WPP05G-WALTER Designation: CNMM120412-HU3 WPP05G Manufacturer: Walter Tools Facts Insert size: 12 mm Thickness: 4 mm Corner radius: 1.2 mm Free angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP05G (coated carbide) Chipbreaker: HU3 Material suitability: Steel (ISO P) Shape: Rhombic 80° Execution: M FAQ What materials is this insert suitable for? The CNMM120412-HU3 WPP05G from Walter Tools is optimised for steel (ISO P), covering a broad range of unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WPP05G grade improves wear resistance and edge robustness, which supports longer tool life and more stable machining cycles. What advantage does the negative 0° geometry provide? A negative 0° free angle increases edge strength for heavy or interrupted cuts, offering improved process reliability during demanding turning operations. Is the HU3 chipbreaker suitable for finishing or roughing? The HU3 chipbreaker is designed for controlled chip formation and can be used across medium cutting conditions; it supports consistent surface quality while maintaining stable chip flow. Which toolholders are compatible with this insert format? The CNMM designation indicates compatibility with standard CNMM indexable turning toolholders; confirm holder clamping and seat specifications before mounting the insert. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanation. There is no connection between our company and the named brands. The offered article is original, brand-new goods from the manufacturer; Walter Tools is a registered brand of the Walter group.
CNMM120412-HU3 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of productive cutting performance and long tool life afforded by the Tiger·tec Gold grade; with an optimised HU3 chipbreaker and a robust rhombic geometry, stable results in Stahl machining are supported. Order the insert via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. CNMM120412-HU3 WPP10G Drehwendeschneidplatte — turning indexable insert, Tiger·tec Gold coating, for Stahl (Walter Tools) The CNMM120412-HU3 WPP10G is a rhombic 80° turning indexable insert designed for general-purpose and demanding Stahl machining, combining a Tiger·tec Gold coated carbide grade with an HU3 chipbreaker for controlled chip formation. Tiger·tec Gold for extended tool life HU3 chipbreaker optimised for Stahl Rhombic 80° form with 1.2 mm radius 0° (negative) free angle for heavy cutting Increased productivity through proven coating technology The coated carbide grade from the Tiger·tec Gold family delivers a balanced combination of wear resistance and toughness. This results in longer tool life under typical turning conditions and reduces the number of tool changes per shift, which increases uptime and throughput. The WPP10G chemistry is tuned for a broad range of Stahl types, addressing both abrasive and adhesive wear modes; the consequence is predictable performance and fewer unexpected interruptions in production. Emphasising process efficiency, the coated grade supports stable cutting at elevated speeds while maintaining surface finish quality. Reliable chip control and stable cutting geometry Built around the HU3 chipbreaker and a rhombic 80° shape, the insert provides consistent chip formation in longitudinal turning and medium-depth cuts. The 1.2 mm corner radius improves edge strength for interrupted cuts and supports dimensional stability when machining tougher Stahl grades. The 0° (negative) free angle is suited to more robust set-ups and heavy-duty cuts, giving rigidity and vibration damping where needed. Together these features mean fewer rejected parts and less scrap, translating into measurable cost savings across production runs. Practical handling, mounting and application benefits The insert’s nominal size and the standard CNMM contour enable straightforward seat and clamp mounting in many common turning toolholders. The coated surface reduces built-up edge tendencies on typical Stahl workpieces, improving part finish and extending cycle lengths. For shops seeking a versatile, general-purpose insert that handles a variety of turning tasks without frequent re-grading, this option simplifies inventory and tool management. Technical data is compatible with ISO-based tooling systems, easing specification and replacement. Contact Metav Werkzeuge for tailored application advice and to secure Walter Tools Tiger·tec Gold inserts for your Stahl turning tasks — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number / SKU: CNMM120412-HU3-WPP10G-WALTER Product designation: CNMM120412-HU3 WPP10G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Corner radius: 1.2 mm Insert shape: Rhombus 80° Size: 12 Thickness: 04 Free angle: 0° (negative) Special features Coating family: Tiger·tec Gold Grade / sort: WPP10G (coated carbide) Chipbreaker: HU3 Execution / tolerance class: M Application: Suitable for Stahl (ISO group P) FAQ What materials is this insert suitable for? The CNMM120412-HU3 WPP10G from Walter Tools is qualified for machining Stahl (ISO group P), covering a spectrum from more wear-resistant to tougher Stahl subgroups. How does the HU3 chipbreaker influence performance? The HU3 chipbreaker on the insert promotes controlled chip segmentation and evacuation when turning Stahl, which supports consistent surface finish and reduces the risk of chip-related interruptions. Can this insert be used for heavy roughing cuts? Yes. The negative 0° free angle combined with the 1.2 mm corner radius provides the rigidity and edge strength required for demanding roughing operations with the CNMM120412-HU3 WPP10G insert. Is the coating suitable for higher cutting speeds? The Tiger·tec Gold coating technology on the WPP10G grade is designed to offer enhanced wear resistance and thermal stability, enabling higher cutting speeds compared with uncoated grades under appropriate conditions. Which toolholders are compatible with this insert form? The rhombic 80° form and CNMM contour match common ISO-style turning toolholders; ensure the correct clamp and seat geometry are used for secure mounting and repeatable positioning. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and brand names mentioned are the property of their respective owners. The Walter Tools name is used for product identification purposes only. The offered item is an original, factory-new product from the manufacturer.
CNMM120412-HU3 WPP20G Wendeplatten - Walter Tools
Benefit from the combination of high wear resistance from the Tiger·tec Gold grade, the stable cutting geometry of the Rhombic 80° form with r1.2 corner radius, and the reliable chip control of the HU3 breaker for steady production results; order original Walter Tools inserts directly via Metav Werkzeuge or consult our technical team for application advice. CNMM120412-HU3 WPP20G indexable turning insert – Rhombic 80°, r1.2, negative 0° clearance, Walter Tools The CNMM120412-HU3 WPP20G is a rhombic 80° indexable turning insert engineered for steel turning applications, delivering a balanced combination of wear resistance and general-purpose performance. Tiger·tec Gold coated carbide grade WPP20G Rhombic 80° form with r1.2 corner radius Negative 0° clearance for stable cutting Designed for steel machining per ISO P High-performance wear resistance for consistent cycle times The Tiger·tec Gold coating and the WPP20G carbide composition provide a marked improvement in wear resistance compared with conventional grades, which reduces the frequency of insert changes and helps maintain process stability. In practical terms, the enhanced coating supports consistent edge life during continuous turning of steels classified under ISO P; accordingly, component tolerances remain more stable across batches. This combination is particularly valuable in production environments where repeatability and predictable tool life contribute directly to throughput and cost-efficiency. Geometry and chip control that support reliable machining The Rhombic 80° shape and r1.2 corner radius yield a robust edge geometry that resists chipping under moderate interrupted cuts and modest radial engagement. Paired with the HU3 chipbreaker, the insert promotes controlled chip formation during steel turning, which simplifies chip evacuation and reduces the risk of surface damage. The negative 0° clearance angle provides a secure cutting stance for heavier cuts and assists in damping vibration, improving dimensional stability on medium to heavy-duty turning operations. Practical application guidance for process engineers This insert is optimised for a wide range of steel grades (ISO P) and suits versatile turning tasks from semi-finish to general roughing operations. When integrating the insert into tooling systems, match the holder geometry to the rhombic 80° form and select feed and speed values consistent with the workpiece steel and the chosen insert thickness and corner radius. The combination of Tiger·tec Gold coating and the HU3 chipbreaker allows conservative feeds for enhanced surface finish or increased feeds for productive metal removal while keeping tool life predictable. Reliability, repeatability and workshop efficiency Tolerance class M and the consistent manufacturing of the insert support reliable referencing and repeatable set-ups in automated and manual workflows alike. The insert’s build and coating philosophy—aimed at wide material coverage and stable chip formation—help reduce unexpected tool changes, minimise scrap rates and support continuous production. Choosing a coated carbide grade such as WPP20G is a pragmatic step for teams prioritising process security and a favourable ratio of performance to cost. For application-specific recommendations or to source original Walter Tools CNMM120412-HU3 WPP20G inserts, contact Metav Werkzeuge for technical consultancy and ordering: info@metav-werkzeuge.com — Tel. +49 2822 7131930 Technical data SKU: CNMM120412-HU3-WPP20G-WALTER Label: Drehwendeschneidplatte CNMM120412-HU3 WPP20G Walter Tools Product type: indexable turning insert Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP20G ISO designation: CNMM120412-HU3 WPP20G Base designation: CNMM120412-HU3 Core figures Corner radius: r1.2 mm Insert size: 12 Thickness: 04 Clearance angle: 0° (negative) Plate form: Rhombus 80° Chipbreaker: HU3 Tolerance class: M Special features Coating/grade: Tiger·tec Gold coated carbide (WPP20G) Material application: Steel (ISO P) Execution: M Series description: balance of wear resistance and universality Sort usage: 10 wear-resistant / 20 universal / 30-35 tougher behaviour FAQ What materials is this insert suitable for? The CNMM120412-HU3 WPP20G insert is designed primarily for machining steels, conforming to ISO P material groups, and was developed to handle the typical heat and chip characteristics of steel turning. How does the Tiger·tec Gold grade benefit production? The Tiger·tec Gold coating on the WPP20G grade increases wear resistance and edge stability, which helps to extend tool life and maintain consistent cycle times in serial turning operations. What is the advantage of the negative 0° clearance angle? A negative 0° clearance provides a stable cutting geometry for heavier radial engagement and helps to damp vibration, supporting more secure cutting in demanding turning tasks. Can this insert be used for finishing as well as roughing? Yes, the combination of the r1.2 corner radius and the HU3 chipbreaker allows flexibility: conservative feeds improve surface finish, while increased feeds enable efficient material removal for roughing. Is this an original Walter Tools product? Yes, this listing describes an original Walter Tools turning insert in the Tiger·tec Gold series with the designation CNMM120412-HU3 WPP20G. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMM120412-HU3 WPP30G HU3 Wendeplatten - Walter Tools
Take advantage of the combination of high edge stability, reliable chip control and proven Tiger‑tec Gold coating for efficient steel turning; order the insert directly via Metav Werkzeuge or consult the team for application advice. CNMM120412-HU3 WPP30G — Turning indexable insert, Tiger‑tec Gold coating, for steel (Walter Tools) The CNMM120412-HU3 WPP30G is a coated turning insert designed for robust steel machining, featuring a rhombic 80° form, a 1.2 mm corner radius and the HU3 chipbreaker for predictable chip formation Tiger‑tec Gold coating WPP30G 0° negative rake for robust cutting Rhombus 80° form, 1.2 mm corner radius Optimised for steel machining (ISO P) Stable, repeatable performance that reduces process variation The Tiger‑tec Gold grade WPP30G is a coated carbide specifically engineered for machining steel under the thermal and mechanical conditions typical of turning operations. Its combination of coating technology and substrate hardness yields improved edge life and consistent wear behaviour, which in turn supports predictable tool-change intervals and fewer unscheduled stops. For production environments where cycle time and reproducibility matter, the insert’s geometry and coating deliver measurable improvements in process stability and part quality. Controlled chip formation and secure cutting geometry for safer cycles The HU3 chipbreaker and the rhombic 80° insert form work together to direct chips reliably away from the cutting zone, reducing the risk of entanglement and surface damage. The 0° negative rake provides a more robust cutting edge for interrupted cuts and heavy cross‑sections, while the 1.2 mm corner radius balances edge strength with surface finish. These design choices make the insert suitable for a range of turning tasks on steels, from medium cuts to tougher operations where chip control and edge security are priorities. Productivity gains through application focus and serviceability By focusing on the ISO P workpiece group, the insert delivers an economical mix of wear resistance and toughness that supports longer tool life in many standard steel applications. The cartridge‑style indexable design allows rapid seat changes and consistent orientation, so setup disruptions are minimised and throughput is improved. For workshops aiming to raise output without sacrificing surface quality, the coated grade and geometry of this insert create a favourable cost‑per‑part profile and reliable repeatability in serial production. Contact Metav Werkzeuge for tailored recommendations on integrating the CNMM120412‑HU3 WPP30G insert into existing turning operations or to request application data and cutting parameter guidance Technical data Article number: CNMM120412-HU3-WPP30G-WALTER Label: Drehwendeschneidplatte CNMM120412-HU3 WPP30G Walter Tools Manufacturer: Walter Tools Product type: Turning indexable insert Grade: WPP30G Series: Tiger‑tec Gold Form: Rhombus 80° Size: 12 Thickness: 04 Corner radius: 1.2 Rake angle: 0° (negative) Chipbreaker: HU3 Execution: M Tolerance class: M Numbers / Core technical data Corner radius: 1.2 mm Rake angle: 0° (negative) Insert size: 12 Thickness code: 04 Tolerance class: M Designs / Special features Tiger‑tec Gold coated carbide grade WPP30G HU3 chipbreaker for controlled chips Rhombus 80° geometry Designed for ISO P (steel) applications Robust edge for interrupted cuts and medium to heavy machining FAQ Which materials is this insert intended for? The CNMM120412‑HU3 WPP30G insert from Walter Tools is optimised for steel (ISO P) machining and is formulated to handle the heat and chip characteristics typical of these materials. What does the HU3 chipbreaker provide? HU3 is designed for predictable chip control and effective chip evacuation, improving surface integrity and lowering the risk of chip re‑cutting during turning operations. Is the Tiger‑tec Gold coating suitable for high‑feed or heavy cuts? The Tiger‑tec Gold coating on the WPP30G grade enhances wear resistance and edge stability, making the insert well suited to demanding cuts on steel where edge robustness matters. How does the 0° negative rake affect performance? A 0° negative rake increases cutting edge strength and resistance to chipping, which is beneficial for interrupted cuts and tougher turning tasks while maintaining acceptable cutting forces. What is the purpose of the 1.2 mm corner radius? A 1.2 mm corner radius provides a compromise between edge strength and surface finish, offering longer life under load and a consistent surface on turned components. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners and are used solely for explanatory purposes. There is no affiliation between our company and the brands mentioned. The offered item is an original, factory‑new product from the manufacturer.
CNMM120412-HU5 WMP20G WMP20G Wendeplatten - Walter Tools
Combine the Tiger·tec Gold coating with the HU5 chipbreaker to secure consistent cutting performance in rostfreier Stahl turning; the rhombic 80° geometry and 1.2 mm nose radius support versatile, low-vibration operations. Order the CNMM120412-HU5 WMP20G directly via Metav Werkzeuge or ask our consultants if needed. CNMM120412-HU5 WMP20G turning insert for rostfreier Stahl by Walter Tools The CNMM120412-HU5 WMP20G is a negative-rake, rhombic 80° turning insert engineered for dependable machining of rostfreier Stahl under medium to robust cutting conditions. Tiger·tec Gold coating for long tool life HU5 chipbreaker for reliable chip control Rhombic 80° shape for versatile turning Designed for rostfreier Stahl machining Consistent cutting performance through advanced coating technology The Tiger·tec Gold coating combined with the WMP20G grade provides improved thermal stability and wear resistance, which translates into longer edge life and fewer interruptions on the shopfloor. For production environments machining rostfreier Stahl, this results in higher overall tool utilisation and a lower cost per component; the coated cemented carbide base helps to counteract adhesive wear and supports stable chip formation under elevated temperatures. These technical properties make the insert suitable where repeatability and predictable tool life are required. Stable chip control and surface quality with HU5 geometry The dedicated HU5 chipbreaker, together with the rhombic 80° profile and negative rake 0°, promotes controlled chip segmentation and reduces the risk of built-up edge formation. That combination improves surface finish and reduces the need for secondary operations. The moderate corner radius (1.2 mm) balances edge strength with the ability to achieve good finishes on external and light profiling cuts. In practice, this means fewer machine stops for clearing chips and less rework, supporting smoother production flow and measurable efficiency gains. Versatile insert geometry for flexible turning applications The CNMM120412-HU5 format offers a pragmatic mix of rigidity and accessibility: the insert size and thickness 04 support stable cutting at a range of feeds and depths of cut, while the 1.2 mm nose radius enables reliable edge strength for interrupted or continuous cuts. The insert is suitable for integration into standard toolholders for CNMM-geometry inserts and adapts well to mixed-batch and series production in metalworking shops that process rostfreier Stahl. Its specification supports both finishing and light roughing tasks when paired with appropriate cutting data. Contact Metav Werkzeuge for tailored cutting-data recommendations or immediate procurement of the CNMM120412-HU5 WMP20G by Walter Tools Technical Data Article number: CNMM120412-HU5-WMP20G-WALTER Name: Drehwendeschneidplatte CNMM120412-HU5 WMP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Corner radius: 1.2 mm Size: 12 Relief angle: 0° (negative) Thickness: 04 Special features Chipbreaker: HU5 Grade/sort: WMP20G Shape: Rhombus 80° Suitable for: rostfreier Stahl Coating/technology: Tiger·tec Gold Execution: M ISO designation: CNMM120412-HU5 WMP20G FAQ Which materials is this insert primarily intended for? The CNMM120412-HU5 WMP20G by Walter Tools is primarily designed for machining rostfreier Stahl under medium to robust cutting conditions. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WMP20G grade increases thermal resistance and edge protection, extending effective tool life and improving process stability during continuous turning operations. How does the HU5 chipbreaker affect machining performance? The HU5 chipbreaker promotes predictable chip formation and evacuation, which contributes to improved surface quality and fewer interruptions caused by tangled or stringy chips. Is this insert suitable for finishing and roughing operations? Yes, the combination of a 1.2 mm corner radius and rhombic 80° geometry allows the CNMM120412-HU5 to be applied to both finishing and light roughing tasks when matched with appropriate cutting data. Which toolholders are compatible with this insert geometry? This insert follows the CNMM-style format for rhombic 80° negative inserts and fits holders specified for that ISO geometry. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
CNMM120412-HU5 WMP20S WMP20S Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating and the WMP20S grade delivers reliable edge life and secure chip formation for rostfreier Stahl turning; coupled with the rhombic 80° geometry and HU5 chipbreaker, this insert supports consistently productive machining. Order the CNMM120412-HU5 WMP20S insert directly via Metav Werkzeuge or consult their specialists for application support. Indexable turning insert CNMM120412-HU5 WMP20S (Rhombic 80°, Walter Tools) for rostfreier Stahl CNMM120412-HU5 WMP20S is a compact indexable insert optimised for turning rostfreier Stahl under mid to robust cutting conditions, combining a coated carbide grade with a chipbreaker designed for secure chip control. Tiger·tec Silver coating for rostfreier Stahl machining Stable chip formation with HU5 chipbreaker Rhombic 80° geometry with 1.2 mm corner radius 0° negative rake for secure cutting edge support Consistent machining performance with modern coating technology The Tiger·tec Silver coating, combined with the WMP20S coated carbide grade, is formulated specifically for the demands of rostfreier Stahl. The coating improves thermal resistance and reduces adhesion tendencies that commonly cause build-up on the cutting edge; as a result the insert maintains a stable cutting edge over longer cycles, reducing interruption for tool changes. This leads to measurable improvements in process reliability and component consistency, particularly when machining tough, tendency-to-stick stainless alloys. The result is more predictable throughput and fewer rejects in series production. Geometry and chip control that improve productivity Designed in a rhombic 80° shape with a 1.2 mm corner radius and a HU5 chipbreaker, the insert balances strength and accessibility. The rhombic geometry provides a secure support face for heavier cuts while still allowing access to tighter profiles, and the specified corner radius supports edge robustness without sacrificing surface finish. The negative rake 0° angle enhances edge support for interrupted cuts and prevents premature chipping in demanding rostfreier Stahl applications. Together these features simplify setup choices and contribute to consistent cycle times on lathes and turning centres. Practical benefits for workshop efficiency and process security This grade and geometry combination is aimed at production environments that require repeatable results and minimum downtime. The WMP20S sort supports stable chip formation in rostfreier Stahl, reducing the risk of built-up edge and improving surface integrity on finished parts. For procurement and process planning the CNMM format offers a straightforward, widely compatible solution for standard toolholders, making inventory management and tool-change procedures more efficient. Relying on a recognised cutter brand such as Walter Tools adds the assurance of thorough material characterisation and consistent batch quality. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver inserts like the CNMM120412-HU5 WMP20S and receive application-specific advice and supply options Technical data Article number: CNMM120412-HU5-WMP20S-WALTER SKU / Label: Drehwendeschneidplatte CNMM120412-HU5 WMP20S Walter Tools Manufacturer: Walter Tools ISO designation: CNMM120412-HU5 WMP20S Facts Plate size: 12 Corner radius: 1.2 mm Relief angle: 0° (negative) Plate thickness: 04 Special features Coating technology: Tiger·tec Silver Grade: WMP20S (coated carbide) Chipbreaker: HU5 Shape: Rhombic 80° Application: rostfreier Stahl Tolerance class: M Series: Tiger-tec Silver FAQ What materials is this insert suitable for? The CNMM120412-HU5 WMP20S insert is formulated for machining rostfreier Stahl; the WMP20S grade and Tiger·tec Silver coating promote stable chip formation and reduced build-up when cutting stainless alloys. How does the HU5 chipbreaker affect performance? The HU5 chipbreaker on this Walter Tools insert supports controlled chip formation in rostfreier Stahl, which helps maintain surface quality and reduces the likelihood of entangling or long, stringy chips. Is the rhombic 80° shape suitable for interrupted cuts? Yes; the rhombic 80° geometry combined with the 0° negative rake provides enhanced edge support, making the insert well suited for intermittent engagement and applications requiring robustness. Can this insert be used on standard CNMM toolholders? The CNMM120412-HU5 format is compatible with standard holders designed for that ISO family; verify holder specification and clamping method for correct seating and secure fixation. What are the expected workshop benefits when switching to this grade? Adopting the WMP20S grade in Tiger·tec Silver typically improves process stability for rostfreier Stahl, reduces unscheduled tool changes due to built-up edge and supports more consistent part quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, factory-new goods from Walter Tools.
CNMM120412-HU5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold wear resistance and the WPP10G grade’s adaptability to steel to increase uptime and reduce tooling costs; order directly via Metav Werkzeuge or consult the technical advisors for application-specific recommendations. CNMM120412-HU5 WPP10G — Indexable Turning Insert for Steel, Walter Tools The CNMM120412-HU5 WPP10G is a rhombic 80° indexable insert engineered for reliable medium-duty turning of steel components, featuring the Tiger·tec Gold coating technology. Tiger·tec Gold coated WPP10G for steel machining Rhombic 80° shape with 1.2 mm corner radius HU5 chipbreaker for reliable chip control 0° negative rake; 12 mm inscribed circle Deliver consistent cycle times with optimised coating technology The combination of Tiger·tec Gold coating and the WPP10G carbide formulation delivers a balance of wear resistance and toughness that stabilises process times when turning steel. This coating technology reduces flank wear and supports consistent edge life, which helps to lower tool change frequency and maintain production output. The result is improved machine utilisation and predictable component quality across batch sizes. Improved chip control and surface finish through geometry The HU5 chipbreaker is designed to produce controlled chip forms when machining typical steels, reducing entanglement and minimising interruptions. Paired with the rhombic 80° geometry and a 1.2 mm corner radius, the insert provides a stable cutting edge that supports repeatable surface finish and dimensional accuracy. These design choices reduce secondary operations and help maintain cycle integrity on turning centres and lathes. Stable clamping and fitting for dependable machining The negative 0° clearance and the standard 12 mm inscribed circle ensure reliable seating in common indexable holder systems, which reduces seating errors and improves repeatability from index to index. The insert’s tolerance class M supports consistent mounting precision, contributing to reproducible part tolerances and fewer in-process adjustments during multi-shift production. Application focus: efficient steel turning in production environments Specifically manufactured for machining steel, this insert offers a versatile performance profile across a range of steels encountered in industrial turning. The WPP10G grade adapts to varied cutting conditions, making it suitable for batch production and mixed-product runs where stability and tool life are priorities. Where process reliability and consistent chip evacuation matter most, this insert supports operational efficiency and helps to reduce overall machining costs. For process-critical steel turning tasks, contact Metav Werkzeuge to evaluate Walter Tools’ Tiger·tec Gold CNMM120412-HU5 WPP10G insert and secure the right tooling solution for your production setup. Technical Data SKU: CNMM120412-HU5-WPP10G-WALTER Product: Indexable turning insert (drehwendeschneidplatte) Designation: CNMM120412-HU5 WPP10G Series: Tiger·tec Gold Manufacturer: Walter Tools Core data Shape: Rhombic 80° Corner radius: 1.2 mm Inscribed circle: 12 Clearance angle: 0° (negative) Grade: WPP10G Tolerance class: M Special features Coating: Tiger·tec Gold (coated cemented carbide) Chipbreaker: HU5 Material suitability: Steel (P) Plate thickness code: 04 Execution: M Product type: Indexable insert FAQ What materials is this insert optimised for? The CNMM120412-HU5 WPP10G from Walter Tools is optimised for machining steel (material group P), offering tailored wear behaviour for unalloyed and alloyed steels. How does the HU5 chipbreaker affect production? The HU5 chipbreaker on the WPP10G grade enhances chip control, promoting safe evacuation and reducing the risk of machine stoppages due to chip entanglement. Can this insert be used in standard CNMM pockets? Yes, the CNMM120412-HU5 designation corresponds to standard CNMM insert pockets; the negative 0° clearance and tolerance class M support reliable seating. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are mentioned here for informational purposes only. There is no affiliation or partnership between our company and the named brands. The offered item is an original, factory-new product from the stated manufacturer.
CNMM120412-HU5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of Tiger‑tec Gold performance and the WPP20G grade for consistently productive turning of steel; the combination of a HU5 chipbreaker and a rhombic 80° geometry ensures stable chip control and reliable tool life. Order the CNMM120412-HU5 WPP20G insert directly via Metav Werkzeuge or ask our consultants if needed. CNMM120412-HU5 WPP20G turning insert — rhombic 80°, 1.2 mm radius, for steel — Walter Tools CNMM120412-HU5 WPP20G is a rhombic 80° turning insert designed for general steel machining where consistent performance and chip control are required, offered as a coated carbide grade in the Tiger‑tec Gold family. Tiger‑tec Gold coating for high productivity Optimised HU5 chipbreaker for controlled chips Rhombic 80° geometry with 1.2 mm corner radius Efficient wear resistance for productive steel turning The coated carbide WPP20G grade, part of the Tiger‑tec Gold series, is developed for demanding turning operations in steel. The multilayer coating increases abrasive wear resistance and thermal stability, which translates into longer edge life and fewer index changes in series production. For manufacturing environments that prioritise cycle time and uptime, the technical specification delivers measurable process security: consistent cutting performance, reduced tool-change frequency and reliable surface quality on each workpiece. Geometry and chip management that stabilise the cut The rhombic 80° insert shape combined with a 0° (negative) rake and the HU5 chipbreaker creates a controlled cutting zone that supports predictable chip formation and evacuation. The 1.2 mm corner radius provides a robust cutting edge able to withstand interrupted cuts and light roughing, while the chipbreaker design helps fragment swarf to avoid entanglement. For operators and process planners, this means fewer stoppages, improved turning stability and an easier set-up window when transferring parameters between machines. Application advice and industrial suitability Engineered primarily for steel (ISO material group P), this insert suits job shops and production lines that require reproducible results across a range of unalloyed and alloyed steels. The coated carbide grade offers a balance between wear resistance and toughness (10 wear‑resistant / 20 universal / 30–35 tougher zones in its application profile), making it versatile for finishing and light to medium roughing tasks. For selection support or parameter recommendations, in‑house technical advisors can provide cutting data adjusted to spindle speed, feed and depth of cut to help achieve the best life and surface finish. Contact Metav Werkzeuge for assistance selecting Walter Tools inserts such as the CNMM120412-HU5 WPP20G and request tailored cutting data for steel applications Technical data SKU: CNMM120412-HU5-WPP20G-WALTER Description: Drehwendeschneidplatte CNMM120412-HU5 WPP20G Walter Tools Type: Turning indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Insert size: 12 Corner radius: 1.2 mm Geometry: Rhombus 80° Rake angle: 0° (negative) Chipbreaker: HU5 Grade: WPP20G Thickness code: 04 Tolerance class: M Execution: M Special features Coated carbide grade (Tiger‑tec Gold) Optimised for steel (ISO group P) Balanced wear resistance and toughness Stable chip control for serial production Robust edge for interrupted cuts FAQ What steels is this insert suitable for? The CNMM120412-HU5 WPP20G insert is specified for ISO group P materials, covering unalloyed and alloyed steels commonly encountered in turning operations. How does the HU5 chipbreaker affect performance? The HU5 chipbreaker on this Walter Tools insert controls chip shape and evacuation, reducing swarf issues and improving process stability during turning. Can this insert be used for roughing and finishing? Yes, the WPP20G grade and the 1.2 mm corner radius allow the insert to perform both light roughing and finishing in steel, with an emphasis on consistent edge life. What is the benefit of the Tiger‑tec Gold coating? Tiger‑tec Gold provides enhanced thermal and abrasive resistance, extending tool life and supporting higher machining productivity on steel components. Is the insert suitable for interrupted cuts? The rhombic 80° geometry and the 1.2 mm corner radius give the insert a robust edge capable of handling interrupted cuts with reduced risk of chipping. Walter Tools: The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CNMM120412-HU5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a robust HU5 chipbreaker and precise rhombus 80° geometry for stable, repeatable turning of stainless steel and heat‑resistant superalloys; order directly via Metav Werkzeuge or ask our consultants if needed. CNMM120412-HU5 WSM20S turning insert — Tiger·tec Silver, for stainless steel and superalloys — Walter Tools The CNMM120412-HU5 WSM20S is a rhombic 80° turning insert with a negative 0° rake designed for demanding internal and external turning in stainless steel and heat‑resistant superalloys, offering controlled chip formation and extended tool life. Tiger·tec Silver coated carbide grade WSM20S Optimised HU5 chipbreaker for stable chips 0° negative rake, 1.2 mm corner radius High performance for difficult-to-machine alloys and stainless steel The coated WSM20S grade, based on the Tiger·tec Silver platform, is engineered for the thermal and mechanical stresses encountered when machining stainless steel and superalloys. The combination of a wear‑resistant carbide substrate and a specialised multi‑layer coating improves thermal stability and reduces flank wear. This results in a more predictable tool life and fewer interruptions to production, which supports efficient cycle planning in batch and continuous operations. Stable chip control and enhanced surface integrity The HU5 chipbreaker and rhombus 80° geometry provide consistent chip segmentation even under adverse cutting conditions. The 0° negative rake and 1.2 mm corner radius contribute to a robust cutting edge that resists built‑up edge and edge chipping, helping to maintain dimensional accuracy and surface finish. For machining where tool reliability is critical, these design choices lower the risk of rework and reduce scrap rates. Process security and economic benefits in series production Adopting this insert supports improved process security through reproducible wear behaviour and stable cutting forces. The Tiger·tec Silver coating enhances heat resistance, enabling higher cutting speeds in many applications and longer intervals between tool changes. Over time, this can translate into lower unit costs and more consistent throughput, which is particularly relevant for production environments focusing on productivity and repeatability. Practical integration and recommended applications The insert conforms to the CNMM120412 designation and fits standard toolholders designed for this insert form. It is best applied where stainless steel and high‑temperature alloys demand strong edge stability and reliable chip evacuation. The robust tolerance class M and the WSM20S grade make it suitable for both roughing operations that require edge strength and semi‑finish passes where surface quality matters. For secure machining of stainless steel and superalloys, specify the Walter Tools CNMM120412-HU5 WSM20S with Tiger·tec Silver coating and contact Metav Werkzeuge for application advice and availability via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: CNMM120412-HU5-WSM20S-WALTER Label: Drehwendeschneidplatte CNMM120412-HU5 WSM20S Walter Tools Brand: Walter Tools Facts Insert designation: CNMM120412-HU5 WSM20S Size: 12 Corner radius: 1.2 Thickness: 04 Rake angle: 0° (negative) Special features Coating: Tiger·tec Silver Grade: WSM20S Chipbreaker: HU5 Geometry: Rhombus 80° Material suitability: S / M (stainless steel, superalloys) Tolerance class: M Series: Tiger‑tec Silver Execution: M Type: turning insert FAQ What materials is this insert suited for? The CNMM120412‑HU5 WSM20S is specified for stainless steel and heat‑resistant superalloys (material groups S and M), offering reliable chip control and edge stability in these challenging materials. Which chipbreaker does the insert use and what benefit does it bring? The insert uses the HU5 chipbreaker; it provides controlled chip segmentation and improved evacuation, reducing the likelihood of tangling and enhancing surface quality during turning. How does the Tiger·tec Silver coating affect tool life? The Tiger·tec Silver coating increases thermal resistance and wear protection on the WSM20S grade, which typically results in longer, more consistent tool life and fewer unscheduled tool changes. Is this insert compatible with standard CNMM toolholders? Yes, the insert follows the CNMM120412 designation and is compatible with standard toolholders designed for that insert form factor. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
CNMM120412-HU5 WSM30S HU5 Wendeplatten - Walter Tools
Take advantage of the combination of a coated carbide grade (WSM30S), a robust HU5 chipbreaker, and a negative 0° rake to secure stable cutting in rostfreier Stahl and heat‑resistant alloys; order directly via Metav Werkzeuge or contact the consultants for tailored application support. CNMM120412-HU5 WSM30S turning insert — Walter Tools, Tiger‑tec Silver, 0° (negativ), R=1.2 The CNMM120412-HU5 WSM30S is a coated carbide indexable turning insert optimised for demanding turning tasks in rostfreier Stahl and heat‑resistant superalloys, combining a proven chipbreaker geometry with the Tiger‑tec Silver coating technology for reliable chip control. Robust Tiger‑tec Silver coating Negative 0° rake for edge security Rhombus 80° form for versatile turning Corner radius 1.2 mm for stable cuts Reliable cutting in rostfreier Stahl and superalloys for consistent results The WSM30S grade from the Tiger‑tec Silver family is engineered for materials that generate heat and tend to work‑harden, notably rostfreier Stahl (ISO group M) and heat‑resistant superalloys/titanium (ISO group S). The coated carbide construction increases thermal resistance and reduces adhesive wear, while the HU5 chipbreaker promotes predictable chip formation. This combination yields fewer process interruptions and a steadier surface finish, which supports improved machine utilisation and repeatable part quality. Geometry and edge features that protect the cutting edge The rhombic 80° insert shape and a corner radius of 1.2 mm deliver a balance between strength and versatility for external and light profiling operations. The 0° (negativ) relief angle enhances edge security under interrupted cuts and heavy engagement, and the HU5 chipbreaker is designed to control chip flow in tough alloys. Translating these features into shopfloor benefits means longer intervals between indexings and greater resistance to edge chipping during medium‑to‑heavy duty turning. Coating and grade for extended tool life and process security The WSM30S grade, a coated carbide within the Tiger‑tec Silver series, focuses on stable wear behaviour and broad material coverage. The coating reduces friction and protects the cutting substrate at elevated temperatures, which pays off in longer tool life and fewer replacements. From a cost‑efficiency perspective, improved life and fewer stops result in lower effective tooling cost per part and a more predictable production rhythm. Practical application notes and machine compatibility The CNMM120412‑HU5 insert is suited to standard indexable turning holders that accept the 12‑size rhombic format and a thickness code of 04; the insert designation indicates the HU5 chipbreaker and the WSM30S grade for heat‑resistant materials. The insert is particularly effective in operations where chip control and edge stability are priorities, such as semi‑finishing and heavier finishing passes in rostfreier Stahl. For holders and clamping details, match the CNMM ISO form and the 80° geometry to ensure correct seating and secure clamping. For application advice or to specify the CNMM120412‑HU5 WSM30S for a production cell, contact Metav Werkzeuge for technical selection and compatibility checks — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: CNMM120412-HU5-WSM30S-WALTER Designation: CNMM120412-HU5 WSM30S Product type: Turning insert (indexable) Series: Tiger‑tec Silver Grade: WSM30S Manufacturer: Walter Tools Facts Relief angle: 0° (negativ) Corner radius: 1.2 mm Insert form: Rhombus 80° Insert size: 12 Thickness code: 04 Chipbreaker: HU5 Tolerance class: M Special features Coated carbide grade (Tiger‑tec Silver) Suited for rostfreier Stahl (ISO M) and superalloys/titanium (ISO S) Designed for stable chip formation and edge security Robust performance under elevated cutting temperatures FAQ What materials is this insert suitable for? The CNMM120412‑HU5 WSM30S from Walter Tools is designed primarily for rostfreier Stahl (ISO group M) and heat‑resistant superalloys/titanium (ISO group S). How does the HU5 chipbreaker benefit the machining process? The HU5 chipbreaker on this indexable turning insert promotes controlled chip formation and evacuation, which reduces the risk of entangling chips and supports consistent surface quality with fewer interruptions. Which insert geometry does this code represent? The CNMM120412‑HU5 designation indicates an 80° rhombic form with a 1.2 mm corner radius and negative 0° rake, suitable for a range of external turning applications. Is this insert recommended for finishing or roughing? With its 1.2 mm corner radius and robust grade, the WSM30S insert is particularly effective in semi‑finishing and heavier finishing where edge security and chip control are required. What are the main advantages of the Tiger‑tec Silver series here? Tiger‑tec Silver coating enhances thermal stability and wear resistance, extending tool life and increasing process security when machining demanding alloys with this Walter Tools insert. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMM120412-HU7 WPP10G WPP10G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold coating and the WPP10G grade provides high wear resistance and stable chip formation for efficient steel turning; the rhombic 80° geometry with corner radius 1.2 mm ensures reliable edge performance. Order the inserts directly via Metav Werkzeuge or consult our technical team for application-specific advice. CNMM120412-HU7 WPP10G indexable turning insert — Tiger‑tec Gold, for steel | Walter Tools The CNMM120412-HU7 WPP10G is an 80° rhombic indexable insert from the Tiger‑tec Gold series, designed for robust and economical turning of steel. Tiger‑tec Gold coated carbide grade WPP10G HU7 chipbreaker for controlled chip formation Rhombic 80° insert with 1.2 mm corner radius Negative 0° rake angle for heavy-duty cuts Consistent productivity and economical machining of steel The Tiger‑tec Gold technology combined with the WPP10G grade delivers a balanced mix of wear resistance and toughness that supports longer tool life in steel applications. Designed for typical thermal and chip‑formation conditions encountered when cutting steel, the insert reduces downtime through predictable edge behaviour and stable wear. This translates into fewer tool changes and lower overall machining costs while maintaining consistent component quality. Geometry and chip control for stable turning operations The HU7 chipbreaker and the rhombic 80° form provide dependable chip control across a wide range of cutting conditions. The corner radius 1.2 mm improves edge strength for interrupted or heavier cuts, while the negative 0° rake geometry enhances robustness on roughing passes. Together these features enable the insert to deliver repeatable performance in demanding operations, supporting process reliability and dimensional consistency. Application scope and practical advantages on the shop floor Marked for the machining group P, the grade is optimised for unalloyed and alloyed steels. The insert’s dimensions—designation CNMM120412-HU7—indicate a compact 12 size with a thickness corresponding to standard indexable insert gauges, making it compatible with a broad range of toolholders. The coated carbide construction ensures improved resistance to abrasive wear and built‑up edge, contributing to predictable life and surface finish stability in serial production. Reliable choice for mixed‑load and production environments A combination of wear‑resistant coating, a robust chipbreaker and a sturdy geometry makes this insert suitable for productive turning applications where both economy and tool life matter. The balanced properties of the grade enable users to maintain higher material removal rates with reduced risk of premature edge failure. For operations seeking process stability and repeatable results, this insert supports continuous production with fewer interruptions. Discuss application requirements with Metav Werkzeuge and specify CNMM120412-HU7 WPP10G Tiger‑tec Gold inserts from Walter Tools for a tailored recommendation and reliable supply. Technical Data Article number: CNMM120412-HU7-WPP10G-WALTER Designation: CNMM120412-HU7 WPP10G Product type: Indexable turning insert Facts Grade / series: WPP10G / Tiger‑tec Gold Chipbreaker: HU7 Shape: Rhombic 80° Corner radius: 1.2 mm Free angle: 0° (negative) Size: 12 Thickness: 04 Tolerance class: M Execution: M Special features Coated carbide grade optimised for steel Suitable material group: P (steel) Stable chip formation and wear resistance Designed for productive turning and consistent edge life FAQ Is this insert suitable for stainless steel? The CNMM120412-HU7 WPP10G is specified for group P (steel); stainless steel suitability is not indicated for this grade. What does the HU7 chipbreaker do? The HU7 chipbreaker on this insert promotes controlled chip formation and evacuation, supporting stable cutting in steel turning. Which series and grade does the insert belong to? This insert is part of the Tiger‑tec Gold series and uses the WPP10G grade, optimised for wear resistance in steel applications. Can the CNMM120412-HU7 WPP10G be used for heavy‑duty roughing? Yes, the rhombic 80° shape, 1.2 mm corner radius and negative 0° geometry make the insert robust for heavier cutting conditions typical of roughing passes. What is the full SKU for ordering and reference? Order or reference SKU CNMM120412-HU7-WPP10G-WALTER for this Walter Tools indexable turning insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, Walter Tools is part of Walter AG and a global manufacturer of precision tools for metalworking. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only. The offered item is an original, factory-new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com