CNMG190612-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, dependable chip control and versatile use on steel for uninterrupted turning operations; order the insert directly via Metav Werkzeuge or consult the technical team for parameter optimisation. CNMG190612-RP5 WPP10G – Turning indexable insert, Tiger‑tec Gold, for steel | Walter Tools The CNMG190612-RP5 WPP10G is a rhombic 80° turning insert designed for robust steel machining, combining a Tiger‑tec Gold coating with an RP5 chipbreaker for stable, productive material removal. Tiger‑tec Gold coated for extended tool life RP5 chipbreaker for consistent chip control Rhombic 80° geometry for versatile turning operations 1.2 mm corner radius for stable edge engagement High-performance cutting for steel that boosts productivity The Tiger‑tec Gold grade and the coated carbide substrate deliver a controlled balance between wear resistance and toughness, resulting in longer tool life and fewer insert changes. The supplied grade WPP10G is developed for typical steel machining applications (material group P), where thermal load and chip formation require a resilient, coated solution. Combining the RP5 chipbreaker with a stable edge geometry reduces built-up edge and avoids frequent stoppages, which supports continuous production and predictable process windows. This paragraph focuses on measurable performance gains and the tangible benefit of reduced downtime. Geometry and edge design that improve process stability The rhombic 80° geometry and the negative 0° relief create a robust insert that resists shock and vibration during interrupted cuts. The 1.2 mm corner radius provides a stronger cutting edge for heavy engagement while maintaining acceptable surface finish, particularly in longitudinal turning and profiling tasks. The RP5 groove promotes short to medium chips appropriate for steel, aiding coolant flow and evacuation. Explained simply: the geometry and chipformer are chosen to increase process security and repeatability in everyday machining scenarios. Practical advantages for workshop planning and tool management Using this grade reduces the frequency of insert replacement and supports consistent component tolerances through improved wear behaviour and repeatable edge form. The insert’s nominal size and thickness simplify inventory classification within existing tool families, and the combination of coated carbide and Tiger‑tec Gold technology helps to maintain cutting performance across a range of cutting speeds. For production planning, this means reduced tool variance and more predictable tool-life cycles, which aid cost calculations and scheduling. Contact Metav Werkzeuge to discuss Walter Tools Tiger‑tec Gold inserts, request cutting data or receive tailored recommendations for turning parameters and toolholder selection Technical data Article number: CNMG190612-RP5-WPP10G-WALTER Designation: CNMG190612-RP5 WPP10G Product type: Turning indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP10G Core specifications Inscribed size: 19 Thickness: 06 Corner radius: 1.2 mm Relief angle: 0° (negative) Chipbreaker: RP5 Insert shape: Rhombus 80° Features & applications Coating / technology: Tiger‑tec Gold Substrate: coated carbide Suitable for: Steel (P) Tolerance class: M Edge preparation: G Series description: WPP10G grade for steel machining FAQ What materials is this insert suitable for? The CNMG190612-RP5 WPP10G insert is intended primarily for steel machining (material group P) and its grade and chipformer are optimised for the heat and chip characteristics typical of steel. Which chip control can be expected from the RP5 chipbreaker? The RP5 chipbreaker on this Tiger‑tec Gold grade promotes short to medium chips for steady evacuation in steel turning, helping to avoid tangling and improving surface consistency. How does the negative 0° relief affect cutting performance? A negative 0° relief increases edge robustness and resistance to shock, which is advantageous for interrupted cuts and heavy depths of cut while maintaining stable cutting forces. Is this insert suitable for finishing as well as roughing? With a 1.2 mm corner radius and the coated carbide grade, the insert can be used in medium-turning and finishing tasks where a compromise between edge strength and surface quality is required. Can existing toolholders for CNMG inserts be used? The CNMG form is a standard rhombic 80° shape; holders designed for CNMG inserts are typically compatible, but toolholder type and clamping must match the insert thickness and seat geometry. Does the Tiger‑tec Gold technology improve tool life compared with uncoated grades? Yes, the Tiger‑tec Gold coating and the WPP10G grade are engineered to enhance wear resistance and edge stability, which together extend effective tool life in many steel applications. The Walter AG (brand appearance: Walter Tools) is part of a leading group of precision tooling manufacturers and focuses on high process security, precise machining and consistent tool performance. Protected trademarks and brand names are the property of their respective owners. Mention of trade names serves explanatory purposes only and does not imply any affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CNMG190612-RP5 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WPP20G graded, coated carbide to achieve stable edge life and productive steel machining with consistent chip control using the RP5 chipbreaker; order directly via Metav Werkzeuge or request specialist advice from our consultants. CNMG190612-RP5 WPP20G — Indexable turning insert, Tiger·tec Gold, for steel | Walter Tools The CNMG190612-RP5 WPP20G is a rhombic 80° indexable turning insert engineered for general steel turning, offering a balance of wear resistance and toughness for reliable production use. Tiger·tec Gold coating for extended tool life WPP20G coated carbide grade for steel machining RP5 chipbreaker for reliable chip control Rhombic 80° form with 1.2 mm nose radius High-performance coating and grade for predictable tool life The combination of Tiger·tec Gold coating and the WPP20G grade provides a coated carbide construction that is optimised for the thermal and mechanical demands of machining steel. This engineered coating reduces wear mechanisms while retaining edge stability, which results in longer tool life and fewer index changes in series production. The result is an insert that supports consistent cycle times and predictable maintenance intervals, contributing to improved process reliability and lower overall production costs. Geometry and chip control for safer, cleaner cutting Designed with an RP5 chipbreaker and a rhombic 80° form, the insert promotes controlled chip formation and efficient evacuation during turning operations. The 1.2 mm nose radius helps to maintain surface integrity while allowing for moderate engagement in finishing and medium cutting tasks. The 0° (negative) clearance contributes to a robust cutting edge, making the insert suited to stable turning setups and interrupted cuts where edge security is critical. Application scope and operational advantages in practice Specified for the ISO group P, this indexable turning insert is tailored to the machining of unalloyed and alloyed steel, delivering a practical compromise between wear resistance and toughness for a broad range of turning applications. The tolerance class M indicates consistent manufacturing accuracy, enabling repeatable seating and predictable performance across multiple toolholders. For production environments seeking reproducibility and straightforward tool inventory management, the insert delivers a compact solution that is simple to adopt into existing turning cycles. Contact Metav Werkzeuge for tailored cutting data and application recommendations for the Tiger·tec Gold WPP20G grade and the CNMG190612-RP5 insert. Technical data Article number: CNMG190612-RP5-WPP20G-WALTER Product type: Indexable turning insert ISO designation: CNMG190612-RP5 WPP20G Manufacturer: Walter Tools Numbers / Core technical data Insert size: 19 Nose radius: 1.2 mm Thickness: 06 Clearance angle: 0° (negative) Tolerance class: M Designs / Special features Coating technology: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: RP5 Insert shape: Rhombic 80° Application: Steel (ISO group P) FAQ What materials is this insert suited for? The CNMG190612-RP5 WPP20G insert from Walter Tools is specified for ISO group P and is therefore suited to machining unalloyed and alloyed steel. How does the Tiger·tec Gold coating benefit production runs? The Tiger·tec Gold coating on the WPP20G grade reduces wear and improves thermal resistance, which extends service life and results in fewer tool changes during extended production. Which geometry features assist with chip control? The RP5 chipbreaker combined with the rhombic 80° form and a 1.2 mm nose radius supports reliable chip formation and evacuation for cleaner, safer turning operations. Is the insert robust enough for interrupted cuts? The negative 0° clearance and the WPP20G coated carbide construction provide a robust cutting edge that is well suited to interrupted cuts and heavier engagement in stable setups. Can this insert be used for finishing and medium cutting? Yes, the geometry and grade are optimised to perform in both finishing and medium turning operations on steel, offering a balance between surface quality and tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for clarification purposes only and do not imply any affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, factory-new product of the manufacturer.
CNMG190612-RP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the high productivity and wear resistance of a Tiger·tec Gold grade insert combined with stable chip control; the RP5 chipbreaker and rhombic 80° geometry ensure reliable performance in steel turning. Order the insert directly via Metav Werkzeuge or request application advice from our consultants. CNMG190612-RP5 WPP30G turning insert for steel — Walter Tools (Tiger·tec Gold, RP5) CNMG190612-RP5 WPP30G is a rhombic 80° turning insert optimised for ISO P (steel) applications, offering Tiger·tec Gold coating and an RP5 chipbreaker for consistent material removal. Tiger·tec Gold coated carbide Designed for steel machining (ISO P) RP5 chipbreaker for stable chip control Rhombic 80° with 1.2 mm corner radius Proven productivity with coated carbide performance The CNMG190612-RP5 WPP30G insert combines Tiger·tec Gold coating with a robust, coated carbide substrate to deliver extended tool life and consistent cutting results when machining steel. The combination of coating technology and substrate hardness reduces flank wear and preserves the cutting edge under cyclic and continuous cuts, which translates into fewer tool changes and improved uptime. The tolerance class M ensures reproducible geometry and repeatable results across production batches, supporting process stability in turning operations. Stable chip control and improved surface quality Equipped with the RP5 chipbreaker, this insert is designed for predictable chip formation in a wide range of cutting parameters typical for steel. Controlled chip flow reduces interruptions, protects the workpiece surface and lessens vibration, which helps to achieve a consistent surface finish. The rhombic 80° geometry, together with a 1.2 mm corner radius, balances edge strength and detailability, enabling both semi-finishing and robust turning passes without sacrificing component integrity. Geometry and edge design for flexible machining The insert’s negative 0° rake geometry provides increased edge stability for heavy cuts and interrupted cuts, while the rhombic form supports access to shoulders and turned profiles. Plate dimensions and thickness are specified to match standard toolholders for cylindrical turning, enabling straightforward integration into existing tool sets. The design is aimed at maintaining cutting performance across varying feeds and depths of cut, making the grade suitable for batch production as well as single-part fabrication where dependability matters. Application focus and material compatibility Developed for ISO P materials, the WPP30G grade is tuned for the thermal and mechanical behaviour of unalloyed and alloyed steels encountered in industrial machining. The coated grade offers a broad application window: it is sufficiently tough for interrupted cuts and resilient enough for higher metal removal rates, while the coating contributes to wear resistance during continuous high-temperature contact. For teams seeking to standardise inserts across steel machining tasks, this grade presents a versatile option that emphasises consistent tool life and process security. Contact Metav Werkzeuge for tailored application advice on the Walter Tools Tiger·tec Gold WPP30G insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CNMG190612-RP5-WPP30G-WALTER Label: Drehwendeschneidplatte CNMG190612-RP5 WPP30G Walter Tools Product type: Drehwendeschneidplatte Facts Size: 19 Plate thickness: 06 Corner radius: 1.2 mm Geometry: Rhombus 80° Free angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP30G Chipbreaker: RP5 Material group: P (steel) Coating technology: coated carbide FAQ What materials is this insert suitable for? This insert is designed for ISO P materials; the WPP30G grade is optimised for machining unalloyed and alloyed steel. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker promotes stable chip control, reducing interruptions and contributing to consistent surface finish when using the CNMG190612-RP5 WPP30G insert. What benefit does the Tiger·tec Gold coating provide? Tiger·tec Gold coating enhances wear resistance and thermal stability, extending tool life and maintaining cutting performance under industrial turning conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, factory-new merchandise of the manufacturer.
CNMG190612-RP7 WKP30S WKP30S Wendeplatten - Walter Tools
Take advantage of the high wear resistance of the Tiger·tec Silver grade together with a robust RP7 chipbreaker and rhombus 80° geometry for stable, productive turning. Order supply or request application advice directly from Metav Werkzeuge if assistance is required. CNMG190612-RP7 WKP30S indexable turning insert — 0° negative rake, 1.2 mm corner radius (Walter Tools) for steel and cast iron The CNMG190612-RP7 WKP30S is an indexable turning insert engineered for demanding machining of steel and cast iron, offering a combination of a coated carbide grade and a geometry geared towards consistent chip control and long tool life. Tiger·tec Silver coating for enhanced wear resistance WKP30S grade optimised for steel and cast iron 0° negative rake, rhombus 80° geometry RP7 chipbreaker and 1.2 mm corner radius Durable grade for extended tool life and predictable output The Tiger·tec Silver chemistry and the WKP30S grade deliver a coated carbide substrate that increases resistance to abrasive wear and thermal loading when machining ISO group P (steel) and K (cast iron). This results in fewer unscheduled tool changes and a more predictable tool-life cycle, which supports continuous production runs and reduces downtime. The material-adapted grade ensures stable chip formation under typical steel heat-generation conditions and the often-brittle chips encountered with cast iron, translating into improved process reliability and consistent component quality. Geometry and chip control that improve surface finish and edge security The insert’s rhombus 80° profile combined with a 0° negative rake strengthens the cutting edge for interrupted cuts and heavy roughing, while the RP7 chipbreaker is tailored to form short, controllable chips for both steel and cast iron. The 1.2 mm corner radius supports a robust edge, reducing the risk of chipping on tougher operations and helping to maintain surface integrity. In practice, this geometry means fewer reworks and a more consistent finish on turned parts, especially when working with variable section thicknesses or interrupted surfaces. Practical workshop benefits that enhance productivity With a nominal size of 19 mm and thickness designation 06, the insert fits standard toolholder systems sized for CNMG geometry, simplifying tool inventory and setup. The combination of grade, chipbreaker and geometry improves process security and makes the insert a solid choice for both reproducible finishing and productive roughing operations. Compliance with the ISO-oriented designation supports straightforward material selection for operators and reduces the time spent on trial-and-error, allowing quicker ramp-up on new jobs and better utilisation of machine time. For tailored application advice or to secure an immediate delivery of Walter Tools turning inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert support and fast supply coordination. Technical data Article number: CNMG190612-RP7-WKP30S-WALTER Designation: CNMG190612-RP7 WKP30S Type: indexable turning insert Series: Tiger·tec Silver Grade: WKP30S Manufacturer: Walter Tools Execution: G Tolerance class: M Core data Geometry: Rhombus 80° Corner radius: 1.2 mm Free angle: 0° (negative) Chipbreaker: RP7 Size: 19 mm Thickness: 06 Material suitability: P / K Special features Coated carbide grade Optimised for steel and cast iron machining Stable chip formation and wear resistance Robust edge for interrupted cuts FAQ What materials is this insert suitable for? The CNMG190612-RP7 WKP30S insert is suitable for ISO groups P (steel) and K (cast iron), benefitting from the Tiger·tec Silver coating for improved wear resistance. How does the 0° negative rake affect cutting performance? A 0° negative rake increases edge strength and resistance to chipping during heavy or interrupted cuts, which is why this insert is specified for robust turning operations. Which chipbreaker should be selected for mixed production? The RP7 chipbreaker on this insert offers reliable chip control for both steel and cast iron, making it a versatile choice for mixed-production environments. Is the corner radius appropriate for finishing operations? The 1.2 mm corner radius balances edge strength and surface integrity; it is suitable for many finishing and semi-finishing tasks while protecting the edge in tougher cuts. Can this insert be used in standard CNMG toolholders? Yes, the CNMG190612-RP7 WKP30S conforms to CNMG geometry and is compatible with holders designed for that insert family and size. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is part of the globally recognised Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product designations are mentioned for identification and explanatory purposes only. The offered article is an original, factory-new product of the manufacturer.
CNMG190612-RP7 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, a precise RP7 chipbreaker and robust negative geometry for dependable steel machining; order or request cutting data and application advice from Metav Werkzeuge. CNMG190612-RP7 WPP10G turning insert for steel — Walter Tools, Tiger·tec Gold CNMG190612-RP7 WPP10G is an indexable turning insert designed for efficient machining of steel under the ISO P classification, offering a durable coated grade and a stable chip control geometry *Tiger·tec Gold coating for high wear resistance *RP7 chipbreaker for stable chip control *Negative 0° geometry for heavy cuts *Rhombic 80° form with 1.2 mm nose radius Higher productivity through wear-resistant grade The combination of Tiger·tec Gold coating and the WPP10G grade delivers consistently low flank wear under the thermal and mechanical conditions typical for steel machining. The coated hardmetal composition is optimised for heat resistance and edge stability, which permits higher cutting parameters while maintaining tool life. This results in reduced tool change frequency and a more predictable machining process, supporting continuous production runs and improved cost-efficiency. Consistent chip control and process stability The RP7 chipbreaker is engineered for controlled chip formation when cutting steel, helping to prevent long, tangled chips and reducing the risk of tool or workpiece damage. Combined with a corner radius 1.2 mm and negative 0° clearance, the geometry provides secure cutting behaviour during heavier engagement, improving dimensional stability and enabling reliable roughing passes. The predictable chip flow supports smoother downstream handling and safer automated processes. Easy integration and robust clamping for daily use The rhombic 80° form and CNMG designation make this insert compatible with standard CNMG toolholders, facilitating quick tool set-up and index changes. The designation CNMG190612-RP7 denotes the insert geometry, size and chipbreaker, simplifying inventory management and tool selection for mixed production. With tolerance class M and the specified dimensions, the insert supports reproducible clamping and repeatable performance across batches, contributing to steady surface quality and process repeatability. Contact Metav Werkzeuge for tailored cutting data, sample calculations and application advice for Walter Tools Tiger·tec Gold inserts via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: CNMG190612-RP7-WPP10G-WALTER Designation: CNMG190612-RP7 WPP10G Brand: Walter Tools Series: Tiger-tec Gold Facts Corner radius: 1.2 mm Plate size: 19 Thickness: 06 Clearance angle: 0° (negative) Tolerance class: M Special features Chipbreaker: RP7 Coating / grade: WPP10G (Tiger·tec Gold) Insert form: Rhombus 80° Application: Steel (ISO P) Execution: G Material code: P FAQ What materials is this insert suitable for? The CNMG190612-RP7 WPP10G insert is specified for steel (ISO P) applications and the WPP10G grade is tailored to the heat and chip formation typical of these materials. How does the RP7 chipbreaker affect performance? The RP7 chipbreaker promotes controlled chip formation and stable evacuation in steel machining, which contributes to improved process reliability and surface consistency when using this Walter Tools insert. Is the geometry suitable for heavy cutting operations? Yes, the negative 0° clearance combined with a 1.2 mm corner radius provides secure edge engagement for heavier cuts while maintaining stable tool life and dimensional control. Can the insert be used in standard CNMG toolholders? The CNMG form and sizing match standard CNMG toolholders, allowing straightforward replacement and interchangeability in common turning tool systems. What benefits does the Tiger·tec Gold coating provide? Tiger·tec Gold coating enhances wear resistance and thermal stability, enabling higher cutting parameters and longer tool life in demanding steel operations with the WPP10G grade. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
CNMG190612-RP7 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coated carbide and the RP7 chipbreaker to achieve stable chip control and extended edge life in Stahl turning; order directly via Metav Werkzeuge or contact our advisors for application support. CNMG190612-RP7 WPP20G indexable turning insert — Tiger‑tec Gold, RP7, for Stahl by Walter Tools The CNMG190612-RP7 WPP20G is an indexable turning insert engineered for productive Stahl machining with a coated carbide grade optimised for balanced wear resistance and toughness. Tiger‑tec Gold coating for extended tool life RP7 chipbreaker for stable chip control Rhombic 80° form for versatile turning 1.2 mm corner radius for reliable edge strength High-performance cutting for consistent Stahl results The CNMG190612-RP7 insert combines the Tiger‑tec Gold coating with a coated carbide substrate to deliver reliable performance when machining Stahl (ISO group P). The coating technology improves resistance to abrasive wear while maintaining edge integrity under the thermal loads typical for turning Stahl. This results in fewer interruptions for tool changes and a more predictable tool life, which supports stable production planning and lower unit costs over longer runs. Stable chip control and secure cutting edge A chipforming geometry with the RP7 breaker and a 0° (negative) clearance angle promotes controlled chip formation and evacuation during conventional turning. The controlled chip flow reduces the risk of built-up edge and unplanned downtime, which is particularly valuable in medium to high-volume operations. The negative rake style improves security at the cutting edge, enabling confidence in interrupted cuts and roughing steps. Economical productivity through grade design and coating The WPP20G grade within the Tiger‑tec Gold family is a coated carbide composition designed as a universal, wear-resistant option for Stahl applications. The formulation balances hardness and toughness to perform across a broad range of feeds and depths of cut, helping to reduce tool inventory complexity. Optimised wear resistance means longer intervals between indexings, contributing to measurable savings in both tool cost and machine hours. Geometry and tolerance for flexible integration The rhombic 80° insert shape, combined with a 1.2 mm corner radius and an insert size of 19, provides a versatile geometry suitable for turning, facing and light profiling operations. The plate thickness 06, tolerance class M and execution G indicate a standardised fit for compatible toolholders, allowing straightforward integration into existing tooling systems. These dimensional characteristics support repeatable set-ups and consistent surface finishes on Stahl components. For robust, productive Stahl turning with Walter Tools’ Tiger‑tec Gold performance, contact Metav Werkzeuge for availability and tailored application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: CNMG190612-RP7-WPP20G-WALTER Label: Drehwendeschneidplatte CNMG190612-RP7 WPP20G Walter Tools Product type: indexable turning insert Manufacturer: Walter Tools Grade/series: WPP20G — Tiger‑tec Gold Designation: CNMG190612-RP7 WPP20G Facts Insert size: 19 Corner radius: 1.2 mm Relief angle: 0° (negative) Thickness: 06 Tolerance class: M Special features Chipbreaker: RP7 Geometry: Rhombus 80° Coating/grade: coated carbide (WPP20G) Execution: G Application: Stahl (ISO P) FAQ What materials is this insert suitable for? The CNMG190612-RP7 WPP20G insert is designed primarily for machining Stahl (ISO group P), offering a balanced performance across unalloyed and alloyed steels. What does the WPP20G designation signify? WPP20G is Walter Tools’ coated carbide grade within the Tiger‑tec Gold family, engineered for improved wear resistance and toughness in Stahl applications. How does the RP7 chipbreaker affect machining? The RP7 chipbreaker promotes controlled chip formation and evacuation, reducing built‑up edge and supporting uninterrupted machining cycles when turning Stahl. Is the insert suitable for interrupted cuts? Yes. The insert’s negative rake (0°) and robust corner radius of 1.2 mm enhance edge security, making it appropriate for interrupted cuts and roughing operations in Stahl. Which insert geometry and tolerance should be expected? The insert features a rhombic 80° form, insert size 19 and tolerance class M, enabling consistent seating in compatible toolholders. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
CNMG190612-RP7 WPP30G WPP30G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating and the WPP30G grade for consistent performance in steel turning; the RP7 chipbreaker together with a 1.2 mm corner radius ensures predictable chip control and extended edge life. Order the CNMG190612-RP7 WPP30G directly via Metav Werkzeuge or consult our advisors for application-specific guidance. CNMG190612-RP7 WPP30G indexable turning insert for steel — Tiger·tec Gold, RP7 chipbreaker (Walter Tools) The CNMG190612-RP7 WPP30G is a coated carbide indexable turning insert designed for productive, stable machining of steels, offering a combination of robust geometry and Tiger·tec Gold coating for improved wear resistance Tiger·tec Gold coated grade WPP30G Rhombic 80° CNMG insert, 19 mm size 1.2 mm corner radius for stable tool life RP7 chipbreaker optimised for steel Consistent productivity for steel turning The combination of the Tiger·tec Gold coating and the WPP30G grade delivers high process stability when machining steels. The coating reduces adhesive wear and improves heat resistance, which helps to maintain a sharp cutting edge over longer production runs. This results in fewer tool changes and more predictable cycle times, a clear benefit for series turning and mixed-batch production where repeatability is essential. The formulation is tuned specifically for the thermal and chip-formation behaviour of steel. Precision geometry for predictable surface quality The Rhombic 80° shape with a 1.2 mm corner radius and 0° (negative) relief angle provides a balance between edge strength and achievable surface finish. A larger corner radius increases edge robustness and reduces the risk of chipping under interrupted cuts, while the rhombic profile supports versatile turning operations from finishing to medium roughing. The tolerance class M ensures consistent fit in standard toolholders, contributing to repeatable part quality and reduced setup variation. Controlled chips and economical tool life The RP7 chipbreaker is engineered for steel cutting conditions to produce controlled, segmented chips that evacuate reliably from the cut. Effective chip control reduces rework and machine downtime, and it can lower the need for extensive secondary chip handling. Combined with a coated carbide substrate, this insert provides an economical balance between wear resistance and toughness, extending service life while maintaining dimensional reliability on workpieces. Ready integration into production workflows With a nominal size of 19 mm and designation CNMG190612-RP7, the insert fits common CNMG toolholders and is suitable for machining both unalloyed and alloyed steels as defined under ISO 513 (workpiece group P). The familiar form factor simplifies tool inventory and changeover; the coated grade and chipbreaker selection make this insert a practical choice for workshops seeking dependable performance without extensive process requalification. Compatibility with standard clamping systems supports rapid implementation on existing turning centres. For robust steel turning with Tiger·tec Gold, request application advice and stock availability from Metav Werkzeuge—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: CNMG190612-RP7-WPP30G-WALTER Designation: CNMG190612-RP7 WPP30G Type: indexable turning insert Series: Tiger-tec Gold Grade: WPP30G Manufacturer: Walter Tools Key dimensions Size: 19 Corner radius: 1.2 mm Thickness: 06 Shape: Rhombus 80° Relief angle: 0° (negativ) Tolerance class: M Materials & features Coating / grade: coated carbide (Tiger·tec Gold) Chipbreaker: RP7 Material application: Steel (P) per ISO 513 FAQ Which steels is this insert intended for? The CNMG190612-RP7 WPP30G insert from Walter Tools is optimised for machining steels (workpiece group P), including typical unalloyed and alloyed steels as defined in ISO 513. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the insert increases wear resistance and heat tolerance, which helps the cutting edge last longer under continuous turning loads and maintain consistent surface finish. How does the RP7 chipbreaker behave in practice? The RP7 chipbreaker produces segmented, controllable chips in steel turning, improving evacuation and reducing the likelihood of chip-related interruptions during machining. Is the geometry suitable for finishing and medium roughing? Yes, the Rhombus 80° form with a 1.2 mm corner radius and 0° negative relief offers a compromise between strength and surface quality, making it suitable for finishing and medium roughing operations. Can this insert be used in standard CNMG holders? The CNMG190612-RP7 WPP30G follows standard CNMG form factors and fits conventional CNMG toolholders, allowing straightforward replacement without special adapters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG190616-MK5 WKK10S WKK10S Wendeplatten - Walter Tools
Robust wear resistance from the Tiger·tec Silver coating combined with the WKK10S grade and MK5 chipbreaker delivers consistent performance when machining abrasive cast iron. Benefit from stable chip formation and prolonged tool life for uninterrupted production. Order the CNMG190616-MK5 WKK10S directly via Metav Werkzeuge or consult our advisers for specific application support. CNMG190616-MK5 WKK10S — Turning insert for cast iron | Walter Tools A CNMG190616-MK5 WKK10S indexable turning insert designed for productive cast iron machining with the Tiger·tec Silver coating and an MK5 chipbreaker. Tiger·tec Silver coating for wear resistance Optimised for cast iron (ISO group K) Rhombic 80° geometry, 1.6 mm corner radius MK5 chipbreaker for controlled chip formation Increase cutting performance and reduce downtime The coated cemented carbide combination of Tiger·tec Silver and WKK10S focuses on abrasion resistance and reliable edge stability when turning cast iron. This composition reduces flank wear under interrupted cuts and high abrasive loads, which translates into longer tool life and fewer insert changes. The organised interaction between coating and substrate enables consistent dimensional results and supports higher metal removal rates without sacrificing surface quality. Achieve safer, more predictable chip control The integrated MK5 chipbreaker has been engineered to manage short, breaking chips typical of cast iron machining, improving evacuation and reducing built-up edge. The negative 0° relief and Rhombic 80° form increase cutting edge strength, while the 1.6 mm corner radius balances durability with accessibility in many turning profiles. Together these features provide a predictable cutting process, minimising unplanned stoppages and enhancing workplace safety. Practical compatibility and efficiency in production With the CNMG190616-MK5 WKK10S insert, workshops benefit from a straightforward technical fit into standard toolholders for rhombic inserts and from a clear materials focus: optimised for the ISO group K. This simplifies grade selection and reduces trial-and-error on new jobs. If additional machining data or suitability checks are required, Metav Werkzeuge provides application consulting and fast technical responses to support integration into existing processes. Contact Metav Werkzeuge for tailored grade recommendations and delivery details to ensure optimal performance in cast iron turning applications Technical Data Article number: CNMG190616-MK5-WKK10S-WALTER Designation: CNMG190616-MK5 WKK10S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKK10S Facts Corner radius: 1.6 mm Plate size: 19 mm Plate thickness: 06 Relief angle: 0° (negative) Geometry: Rhombus 80° Tolerance class: M Special features Coated cemented carbide MK5 chipbreaker Optimised for cast iron (ISO group K) Suitable for productive turning applications FAQ What materials is this insert intended for? The CNMG190616-MK5 WKK10S from Walter Tools is optimised for machining cast iron (ISO group K), designed to handle abrasive wear and the typical chip behaviour of these materials. Which chipbreaker is fitted and what benefit does it provide? The insert uses the MK5 chipbreaker, which improves chip control for short, breaking chips common when turning cast iron, leading to safer evacuation and more consistent surface finishes. Is the geometry suitable for heavy-duty operations? Yes, the Rhombic 80° form combined with a 1.6 mm corner radius and negative 0° relief offers robust cutting edge strength suitable for demanding turning tasks. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, brand-new product of Walter Tools.
CNMG190616-MK5 WKK20S WKK20S Wendeplatten - Walter Tools
Benefit from a combination of high wear resistance from the Tiger‑tec Silver coating, secure chip control with the MK5 breaker and the robust Rhombic 80° form for stable turning of cast iron; order directly via Metav Werkzeuge or consult our specialists for application advice. Turning insert CNMG190616-MK5 WKK20S for cast iron — Walter Tools The CNMG190616-MK5 WKK20S is a coated carbide turning insert engineered for productive machining of cast iron with a focused chip‑control geometry and a durable Tiger‑tec Silver coating. Tiger‑tec Silver coating for high wear resistance Optimised for cast iron machining (ISO group K) Rhombic 80° form with 1.6 mm nose radius MK5 chipbreaker for stable chip control Maximised productivity through material‑matched design The insert combines a Tiger‑tec Silver coating with a coated carbide substrate to address the abrasive wear characteristics of cast iron. This combination leads to consistently high abrasion resistance and longer tool life under demanding conditions. The MK5 chipbreaker is tuned to produce short, controllable chips when turning cast iron, reducing interruptions and improving process reliability. With a Rhombic 80° form and a 1.6 mm nose radius the geometry balances edge strength and surface finish, enabling higher material removal rates without sacrificing component quality. Robust geometry for stable, repeatable turning operations A 0° negative rake gives the cutting edge increased mechanical strength, particularly beneficial for interrupted cuts and roughing passes in cast iron. The insert’s tolerance class M and execution G indicate consistent manufacturing quality and dimensional accuracy, which supports reproducible setup and predictable tool life. The CNMG designation aligns the insert with standard indexable toolholders, making integration into existing tool systems straightforward. For workshops seeking reliable cycle times, the design emphasises efficient chip flow and reduced tool change frequency, translating into measurable productivity gains. Practical advantages and supplier guidance Specifically formulated for the ISO material group K (cast iron), the insert’s configuration reduces built‑up edge and helps maintain surface integrity on grey and nodular cast irons. The visible benefits are fewer secondary operations and improved first‑pass part quality. For selection and process windows, Metav Werkzeuge’s application team can provide cutting data recommendations and advice on compatible toolholders. If further technical data or cutting trials are required, the team is available to discuss application specifics and to help integrate the insert into production workflows. Contact Metav Werkzeuge for tailored application support for the Walter Tools CNMG190616-MK5 WKK20S turning insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for detailed cutting parameters and availability. Technical data Article number: CNMG190616-MK5-WKK20S-WALTER SKU: CNMG190616-MK5-WKK20S-WALTER Product type: Turning insert Designation: CNMG190616-MK5 WKK20S Series: Tiger‑tec Silver Facts Insert size: 19 Thickness: 06 Nose radius: 1.6 mm Shape: Rhombus 80° Clearance angle: 0° (negative) Special features Coating: Tiger‑tec Silver (coated carbide) Chipbreaker: MK5 Application: cast iron (ISO group K) Tolerance class: M Execution: G FAQ What materials is this insert suitable for? The CNMG190616-MK5 WKK20S turning insert by Walter Tools is optimised for cast iron applications and corresponds to ISO material group K. How does the MK5 chipbreaker influence machining? The MK5 chipbreaker on the Walter Tools insert promotes short, consistent chips when machining cast iron, improving chip evacuation and reducing workpiece and toolholder interference. What are the benefits of Tiger‑tec Silver coating? Tiger‑tec Silver provides enhanced wear resistance and thermal stability for the coated carbide substrate, extending cutting life in abrasive cast‑iron conditions. Why choose a 0° negative rake and 1.6 mm nose radius? A 0° negative rake increases edge strength for interrupted or heavy cuts, while a 1.6 mm radius delivers a compromise between robustness and surface finish, suitable for roughing to semi‑finishing operations. Is the CNMG designation compatible with standard toolholders? Yes, the CNMG geometry follows ISO indexable insert standards and fits corresponding CNMG toolholders; confirm holder specifications for secure clamping. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is part of the Sandvik group and is recognised for precision machining tools. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer.
CNMG190616-NRT WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, the WSM20S grade and the rhombic 80° geometry to achieve stable chip formation and extended edge life in the machining of stainless steel and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult the team for application‑specific recommendations. CNMG190616-NRT WSM20S – indexable turning insert, Tiger‑tec Silver, Walter Tools The CNMG190616-NRT WSM20S is a rhombic 80° indexable turning insert designed for demanding turning of stainless steel and high‑temperature alloys, combining a coated carbide grade with an NRT chipbreaker for secure chip control. Tiger‑tec Silver coating for heat resistance Suited for stainless steel and superalloys Rhombic 80° geometry for flexible turning 1.6 mm corner radius for robust edge High performance grade for demanding materials The WSM20S grade in the Tiger‑tec Silver series is a coated carbide developed to meet the challenges of machining stainless steel and heat‑resistant superalloys. Its coating improves thermal stability and reduces adhesion at the cutting edge, which supports stable chip formation and extends tool life under elevated cutting temperatures. For production environments where consistency and fewer tool changes are priorities, this combination translates into measurable productivity gains and more predictable component quality. Geometry and edge design that improve process reliability The rhombic 80° shape with a 1.6 mm corner radius and a negative 0° clearance provides a balance between strength and versatility: the geometry supports robust roughing while delivering acceptable surface integrity in finishing passes when paired with the correct cutting parameters. The integrated NRT chipbreaker is tailored to control chip flow for the targeted material groups, reducing the risk of long, stringy chips and improving operator safety. The tolerance class M indicates manufacturing precision that helps ensure repeatable seating in toolholders. Practical integration and expected application benefits As an indexable turning insert, this item fits common CNMG toolholder families and is intended for operations where thermal loads and material ductility demand a wear‑resistant grade. The insert is particularly suited for workpieces specified under ISO 513 for groups M (stainless steel) and S (superalloys, titanium) and supports machining strategies that prioritise process security and steady surface quality. Choosing this insert can reduce downtime, limit rework and improve overall process economics when matched with suitable cutting data and rigid tooling setups. Contact Metav Werkzeuge for tailored machining recommendations and availability of Walter Tools Tiger‑tec Silver inserts such as the CNMG190616‑NRT WSM20S — the consultants provide application‑specific support and supply guidance for efficient implementation. Technical data SKU: CNMG190616-NRT-WSM20S-WALTER Designation: CNMG190616-NRT WSM20S Product type: Turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Series: Tiger‑tec Silver Chipbreaker: NRT Tolerance class: M Facts Plate size: 19 Plate thickness: 06 Corner radius: 1.6 mm Clearance angle: 0° (negative) Shape: Rhombus 80° Plattengröße designation: CNMG190616 Special features Coated carbide grade WSM20S Optimised for stainless steel and superalloys (ISO 513 groups M and S) Tiger‑tec Silver coating technology NRT chipbreaker for controlled chip removal Negative rake / robust cutting edge FAQ Which materials is this insert suitable for? The CNMG190616‑NRT WSM20S insert from Walter Tools is engineered for stainless steel and for heat‑resistant superalloys and titanium (ISO 513 groups M and S), offering coating and grade properties that resist adhesion and thermal load. What is the corner radius and how does it affect machining? This insert features a 1.6 mm corner radius; a larger radius increases edge strength for roughing and supports longer tool life, while influencing the achievable surface finish and cutting forces. How does the Tiger‑tec Silver coating benefit production? Tiger‑tec Silver coating enhances thermal resistance and reduces edge wear and built‑up edge formation, which improves process stability and extends the interval between indexings or insert changes. What role does the NRT chipbreaker play? The NRT chipbreaker is designed to produce short, controllable chips when machining ductile materials such as stainless steel, improving evacuation and reducing the likelihood of chip entanglement. Is the geometry suitable for heavy roughing or finishing passes? The rhombic 80° form with negative 0° clearance and a 1.6 mm corner radius is optimised for robust roughing and medium finishing; final surface quality depends on toolholder rigidity and selected cutting parameters. Manufacturer: Walter Tools (Walter AG), Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered item is original factory‑new goods of the manufacturer.
CNMG190616-RM5 WMP20G RM5 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a reliable RM5 chipbreaker and robust rhombic geometry for consistent stainless-steel turning; order the CNMG190616-RM5 WMP20G directly via Metav Werkzeuge or request application advice from our consultants. CNMG190616-RM5 WMP20G Turning Insert (Walter Tools) — 0° (negative), Rhombus 80°, for stainless steel A CNMG190616-RM5 WMP20G turning insert engineered for secure chip formation and reliable edge stability in the machining of stainless steel components. Tiger·tec Gold coating for long tool life Optimised RM5 chipbreaker for stainless steel Rhombic 80° geometry for robust cutting 0° negative rake for secure clamping Consistent chip control for demanding stainless-steel turning The hardened composition and dedicated chip management deliver a measurable improvement in process stability when machining stainless steel. With the RM5 chipbreaker, chips are broken and evacuated reliably under medium to heavy cutting conditions, reducing the risk of built-up edge and improving surface quality. The insert’s behaviour is optimised for the thermal and work-hardening tendencies of austenitic and martensitic stainless steels, so operators see fewer interruptions and a steadier production flow. Durable coating and geometry that extend tool life The Tiger·tec Gold technology combines a coated carbide substrate with a surface architecture designed to resist abrasive and adhesive wear. This yields a stable cutting edge and extended tool life, which in turn increases uptime and lowers tooling costs per component. The grade WMP20G provides a balanced performance for medium to robust applications, supporting higher cutting speeds while maintaining dimensional consistency and repeatable finish quality. Secure seating and robust shape for reliable turning operations The rhombic 80° outline gives good access to a variety of cutting angles and supports stable insert clamping; combined with the 0° (negative) rake face the design reduces vibration and ensures dependable seat life in conventional toolholders. The defined corner radius 1.6 mm delivers a compromise between edge strength and achievable surface finish, making the insert suitable for both roughing and semi-finishing passes where edge robustness is required. Practical integration into production for predictable results Specified to common ISO geometry for indexable turning, this insert is straightforward to implement within existing tool systems and is particularly suited to workshops striving for consistent results under variable batch sizes. The combination of coated carbide, dedicated chip control and the insert’s geometry supports process reliability and helps to reduce scrap rates. For manufacturing environments where repeatability and predictable tool change intervals matter, the design contributes directly to overall productivity improvements. For procurement or application-specific recommendations on Walter Tools' CNMG190616-RM5 WMP20G, contact Metav Werkzeuge for precise advice and fast fulfilment Technical data Article number: CNMG190616-RM5-WMP20G-WALTER Designation: CNMG190616-RM5 WMP20G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WMP20G Product type: Turning insert SKU: CNMG190616-RM5-WMP20G-WALTER Dimensions & key values Size: 19 Thickness: 06 Corner radius: 1.6 mm Free angle: 0° (negative) Features & applications Coating: Tiger·tec Gold Chipbreaker: RM5 Shape: Rhombus 80° Material group: M (rostfreie Stähle / stainless steel) Tolerance class: M Intended use: Turning of stainless steel FAQ What materials is this insert suitable for? The CNMG190616-RM5 WMP20G is designed primarily for machining stainless steel (material group M) and supports medium to robust cutting conditions. What is the advantage of the RM5 chipbreaker? The RM5 chipbreaker ensures reliable chip formation and evacuation when turning stainless steel, reducing built-up edge and stabilising machining processes. How does the Tiger·tec Gold coating benefit cycle time? The Tiger·tec Gold coating increases wear resistance and edge stability, which leads to longer tool life and fewer tool changes during production. Which cutting tasks suit the rhombic 80° geometry? The rhombic 80° shape provides robust cutting geometry for roughing and semi-finishing, offering good access to angled cuts and stable clamping. What does the 0° (negative) free angle mean for clamping? A 0° (negative) free angle improves clamping security and reduces vibration, helping to maintain consistent seat life under conventional toolholding conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
CNMG190616-RM5 WMP30G WMP30G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating, an RM5 chipbreaker and a robust rhombic geometry for stable processing of stainless steels; increased tool life and fewer interruptions improve productivity. Order the indexable turning insert directly via Metav Werkzeuge or consult the team for cutting data and application advice. CNMG190616-RM5 WMP30G – indexable turning insert, Tiger·tec Gold (Walter Tools) A CNMG190616-RM5 WMP30G indexable turning insert optimised for medium to robust stainless steel turning, offering stable chip control and durable coated-carbide performance Tiger·tec Gold coating for extended tool life RM5 chipbreaker for dependable chip control Suited for stainless steel (ISO group M) machining Rhombic 80° form with 1.6 mm corner radius Faster, more consistent machining with optimised chip control The combination of the RM5 chipbreaker and the Tiger·tec Gold coating is engineered to deliver reliable chip formation when cutting tough, heat-sensitive alloys such as stainless steel. Stable chips reduce the risk of built-up edge and tool interruptions, which translates into higher spindle utilisation and shorter cycle times. This geometry and chip control combination make the insert particularly valuable where repeatable production and reduced rework are priorities. Reproducible surface finish and secure edge integrity The rhombic 80° form and 1.6 mm corner radius support dimensional stability and help maintain a consistent cutting edge under medium to robust cutting conditions. A negative 0° relief contributes to a robust cutting edge that tolerates varying depths of cut and less-than-ideal setup conditions without sacrificing part finish. The result is fewer rejects and less time spent on manual finishing operations. Practical integration and application guidance for production use This grade, WMP30G, is a coated carbide designed for the particular demands of ISO M materials. The insert fits standard CNMG toolholders and is compatible with common turning tool systems, enabling straightforward integration into existing machining strategies. For complex or high-value components, technical support and cut‑data from Metav Werkzeuge can help dial in process parameters to balance productivity and edge life. If uncertainty exists about suitability for a specific job, Metav Werkzeuge provides application advice and cutting data. Contact Metav Werkzeuge for tailored cutting data and to secure CNMG190616-RM5 WMP30G inserts with Tiger·tec Gold for stainless steel applications Technical data SKU: CNMG190616-RM5-WMP30G-WALTER Designation: CNMG190616-RM5 WMP30G Product type: indexable turning insert (drehwendeschneidplatte) Manufacturer: Walter Tools Numerical data Size: 19 mm Corner radius: 1.6 mm Thickness code: 06 Relief angle: 0° (negative) Design and special features Series: Tiger·tec Gold Grade: WMP30G Chipbreaker: RM5 Form: Rhombic 80° Suitable material group: ISO M (stainless steel) Coated carbide insert FAQ Which materials is this insert designed for? The CNMG190616-RM5 WMP30G insert from Walter Tools is specified for ISO M materials and is optimised for machining stainless steel under medium to robust conditions. What makes the Tiger·tec Gold grade advantageous? The Tiger·tec Gold coating on the WMP30G grade enhances wear resistance and thermal stability, enabling longer edge life and consistent performance when using the CNMG190616-RM5 in demanding stainless-steel operations. How does the RM5 chipbreaker affect productivity? The RM5 chipbreaker promotes stable chip formation, which reduces edge build-up and unplanned stoppages; using the CNMG190616-RM5 with a suitable holder supports higher effective machining time. Is this insert compatible with standard CNMG toolholders? Yes, the CNMG190616-RM5 is manufactured to the CNMG ISO geometry and will fit corresponding CNMG turning toolholders, allowing straightforward replacement and integration into existing setups. Where can cutting data and further technical guidance be obtained? Metav Werkzeuge can provide application-specific cutting parameters and advice for the CNMG190616-RM5 WMP30G to help optimise cycle time and extend tool life. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers (Walter Tools).
CNMG190616-RM5 WSM20S RM5 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver wear resistance and the RM5 chipbreaker for reliable chip control and extended tool life; order directly via Metav Werkzeuge or ask our consultants for application support. CNMG190616-RM5 WSM20S Turning insert — Tiger·tec Silver, RM5 chipbreaker (Walter Tools) The CNMG190616-RM5 WSM20S is a negative-rake, rhombic 80° turning insert designed for the productive machining of rostfreier Stahl and heat‑resistant alloys in demanding turning operations Tiger·tec Silver coating for edge stability RM5 chipbreaker for secure chip control Rhombic 80° geometry for flexible turning Suitable for rostfreier Stahl and superalloys High cutting performance where heat and toughness matter The combination of the Tiger·tec Silver technology and the WSM20S grade provides a coated hard‑metal substrate engineered for elevated thermal and mechanical loads. This results in a stable cutting edge under the conditions typical for rostfreier Stahl and heat‑resistant alloys, enabling higher productive cutting parameters and longer tool life. The enhanced wear resistance reduces the frequency of index changes and supports consistent component quality across production batches, which translates into tangible efficiency gains on the shop floor. Geometry and chip control that stabilise machining results The insert’s RM5 chipbreaker and Rhombus 80° shape are configured to promote controlled chip formation and safe evacuation during turning. With a negative 0° clearance and a corner radius of 1.6 mm, the design increases edge strength and dampens vibration in interrupted or heavy cuts. These geometric choices help achieve reliable surface integrity and dimensional stability while maintaining process security in continuous production. Operators will notice improved repeatability and fewer edge‑related interruptions. Application guidance and practical advantages for production This indexable insert suits applications in the ISO groups M and S, meaning it is intended for rostfreier Stahl and for heat‑resistant superalloys and titanium where thermal resistance and edge stability are decisive. The insert’s construction supports both roughing and medium finishing tasks when the cutting data are adapted to the workpiece and machine capability. For integration into a production process, the combination of grade and chipbreaker offers an economically attractive balance between tool life and machining speed, supporting steady productivity and fewer unexpected stoppages. Consult Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver inserts, application parameters and batch supply — contact info below Technical data SKU: CNMG190616-RM5-WSM20S-WALTER Name: CNMG190616-RM5 WSM20S Type: Turning insert Brand: Walter Tools Facts Insert size: 19 Thickness code: 06 Corner radius: 1.6 mm Clearance angle: 0° (negative) Shape: Rhombus 80° Special features Grade: WSM20S Series: Tiger·tec Silver Chipbreaker: RM5 Coated hard metal Material suitability: rostfreier Stahl (M) Material suitability: heat‑resistant superalloys and titanium (S) Corner radius: 1.6 Brand: Walter Tools FAQ Which materials can this insert machine effectively? The CNMG190616‑RM5 WSM20S from Walter Tools is developed for rostfreier Stahl (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), offering enhanced edge stability and thermal resistance for those materials. What is the corner radius and how does it affect results? The insert has a corner radius of 1.6 mm; this radius increases edge robustness, improves resistance to chipping in demanding cuts and contributes to a consistent surface finish when combined with the RM5 chipbreaker. Is the RM5 chipbreaker suitable for finishing operations? The RM5 chipbreaker promotes controlled chip formation and can be used for medium finishing and productive roughing, depending on cutting parameters and machine rigidity; fine finishing may require adjusted feeds and speeds. How can the insert be ordered or specified for production? Order using SKU CNMG190616‑RM5‑WSM20S‑WALTER via Metav Werkzeuge; for cutting data recommendations and batch supply contact info@metav-werkzeuge.com or call +49 2822 7131930 Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CNMG190616-RM5 WSM30S RM5 Wendeplatten - Walter Tools
Take advantage of the proven combination of Walter Tools' Tiger·tec Silver coating and the WSM30S grade for dependable machining of tough alloys and rostfreier Stahl; the optimised RM5 chipbreaker and robust rhombic geometry ensure steady chip control and long tool life. Order directly via Metav Werkzeuge or consult the team for application-specific setup. CNMG190616-RM5 WSM30S Drehwendeschneidplatte (Tiger·tec Silver) – for rostfreier Stahl and superalloys | Walter Tools CNMG190616-RM5 WSM30S is a coated carbide indexable insert designed for demanding turning tasks on rostfreier Stahl and heat-resistant alloys, offering a stable cutting edge and high process reliability Tiger·tec Silver coated carbide grade WSM30S Optimised RM5 chipbreaker for secure chip control Rhombic 80° shape with 1.6 mm corner radius Negative 0° rake for robust cutting stability High-performance grade to extend cutting intervals The combination of the Tiger·tec Silver coating and the WSM30S grade delivers a balanced performance profile specifically tuned for materials that generate heat and tend to form built-up edge. The advanced coating increases thermal resistance and reduces abrasive wear, which translates into longer periods between index changes and fewer unexpected interruptions. For workshops that process rostfreier Stahl or heat-resistant superalloys, this means more consistent cycle times and a measurable improvement in productivity without sacrificing surface integrity. Secure chip control for uninterrupted production An optimised RM5 chipbreaker supports reliable chip formation even under heavy engagement, lowering the risk of entanglement and machine downtime. Stable chip geometry promotes safer swarf evacuation and contributes to a more predictable surface finish on the workpiece. Where process stability is paramount—for example when turning long shafts of rostfreier Stahl—the enhanced chip control reduces secondary operations and cleaning time, making the machining sequence smoother and more efficient. Geometry and edge robustness that support hard workpieces The rhombic 80° plate form paired with a 1.6 mm corner radius and a 0° (negative) rake angle provides a strong cutting edge suited for interrupted cuts and tougher material grades. The insert’s 19 mm size and standard thickness support secure clamping and straightforward indexation, while the tolerance class M ensures repeatable positioning in toolholders. These mechanical attributes combine to reduce vibration and edge chipping, helping to maintain dimensional accuracy and surface quality over longer tool life. Application focus and process advantages Intended for the machining of rostfreier Stahl (ISO group M) and heat-resistant superalloys and titanium (ISO group S), the insert offers a practical solution where thermal loads and edge-stability demands are high. The coated carbide construction and optimised geometry improve the probability of achieving first-pass conformance to drawing tolerances, lowering rework rates. Choosing a Walter Tools Tiger·tec Silver insert supports a consistent, production-oriented workflow and contributes to predictable tool consumption rates in industrial turning operations. Contact Metav Werkzeuge to discuss the Walter Tools Tiger·tec Silver inserts for rostfreier Stahl and superalloy turning and to identify the optimal RM5 configuration for the specific application; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data SKU: CNMG190616-RM5-WSM30S-WALTER Article designation: CNMG190616-RM5 ISO designation: CNMG190616-RM5 WSM30S Manufacturer: Walter Tools Facts Insert size: 19 mm Corner radius: 1.6 mm Thickness: 06 Rake angle: 0° (negative) Tolerance class: M Special features Grade: WSM30S Series: Tiger·tec Silver Chipbreaker: RM5 Plate form: Rhombus 80° Suitable material groups: S / M (superalloys/titanium and rostfreier Stahl) Execution: G FAQ Which materials are recommended for this insert? The insert is suited to rostfreier Stahl (ISO group M) and heat-resistant superalloys and titanium (ISO group S); the WSM30S grade and Tiger·tec Silver coating support thermal and edge-stability demands. What advantages does the RM5 chipbreaker provide? The RM5 chipbreaker promotes controlled chip formation and safer swarf evacuation, reducing the likelihood of chip-related interruptions and helping to maintain consistent surface finish. How does the rhombic 80° geometry affect cutting performance? The rhombic 80° shape provides a versatile cutting angle that supports both finishing and medium turning; combined with the 1.6 mm corner radius it improves edge strength for interrupted cuts. Is this insert compatible with standard CNMG toolholders? Yes, the CNMG190616 form follows standard CNMG dimensions and can be used in toolholders designed for CNMG inserts, observing the specified clamping and seating requirements. What does the tolerance class M mean in practice? Tolerance class M signifies consistent manufacturing tolerances for repeatable seating and indexing, supporting accurate repositioning after index changes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen (z. B. Walter Tools) und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG190616-RP5 WPP05G WPP05G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the RP5 chipbreaker delivers consistent cutting performance and extended tool life for steel machining; the Rhombic 80° form with a 1.6 mm nose radius ensures stable machining and predictable surface finish. Order this insert through Metav Werkzeuge or consult the specialists for application support and quick supply. CNMG190616-RP5 WPP05G turning insert — Tiger·tec Gold for steel — Walter Tools The CNMG190616-RP5 WPP05G is a Rhombic 80° turning insert engineered for proven performance in steel turning applications, combining a robust chip control geometry with a wear-resistant coated carbide grade. Tiger·tec Gold coated carbide for durability Optimised RP5 chipbreaker for continuous cuts Rhombic 80° form with 1.6 mm nose radius Negative 0° rake for stable plunge cutting Improved productivity through coating and grade optimisation The combination of Tiger·tec Gold technology and the WPP05G carbide grade targets extended tool life and consistent performance under typical steel cutting temperatures. The advanced coating reduces flank wear and improves adhesion resistance, which translates into fewer tool changes and higher uptime on production lines. For process planners, this means a measurable improvement in cycle-time stability and lower overall machining costs while maintaining reproducible component quality. Reliable chip control for steady surface quality Built around the RP5 chipbreaker, the insert provides controlled chip formation suited to continuous and light interrupted turning. The geometry reduces the risk of built-up edge and supports steady evacuation of chips, contributing to a uniform surface finish and reducing secondary operations. Operators and engineers benefit from predictable behaviour in medium-duty turning, supporting consistent batch production and simpler process parameter setting. Versatility and mechanical stability in demanding cuts The Rhombic 80° insert form with a 1.6 mm nose radius and 0° negative rake gives mechanical stability during plunge and profile turning, particularly where rigidity and edge strength are required. The insert’s dimensions and tolerance class M ensure repeatable seating and compatibility with standard toolholders. As a coated carbide solution intended for steel (P), it suits a broad range of unalloyed and alloyed steels, offering a balance between wear resistance and toughness for reliable chip control. Practical integration and selection guidance Tolerance class and the insert’s geometry make integration straightforward into existing turning tool systems, while the coated carbide composition keeps maintenance predictable. When selecting cutting parameters, favour stable feeds and appropriate cutting speeds for the steel grade to leverage the coating’s thermal advantages. For customers seeking reproducible results, this insert supports a process-oriented approach that prioritises consistent component tolerances and reduced rework. For tailored cutting recommendations and supply of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 for technical consultation and immediate ordering. Technical data SKU: CNMG190616-RP5-WPP05G-WALTER Designation: CNMG190616-RP5 WPP05G Product type: Turning insert Manufacturer: Walter Tools Facts Size (inscribed circle): 19 Thickness: 06 Nose radius: 1.6 mm Rake angle: 0° (negative) Tolerance class: M Special features Grade: WPP05G (Tiger·tec Gold) Series/coating: Tiger·tec Gold Chipbreaker: RP5 Insert form: Rhombic 80° Suitable for: Steel (P) Material: Coated carbide FAQ Which materials is this insert designed to machine? The CNMG190616-RP5 WPP05G turning insert is designed primarily for steel (P) applications, covering unalloyed and alloyed steels with a balance of wear resistance and toughness. What does the RP5 chipbreaker deliver in practice? The RP5 chipbreaker on this Walter Tools insert provides controlled chip formation for continuous cuts, improving chip evacuation and contributing to consistent surface finish and fewer machining interruptions. How does the Tiger·tec Gold coating affect tool life? Tiger·tec Gold coating enhances thermal stability and wear resistance; when used under appropriate cutting conditions, the coating extends edge life and supports higher process reliability in steel turning operations. Is the insert suitable for plunge or profile turning? Yes—thanks to the Rhombic 80° form and 0° negative rake, the insert offers mechanical robustness for plunge and profile turning where stability and edge strength are important. What does tolerance class M indicate for this insert? Tolerance class M signifies a medium tolerance range for dimensional and seating accuracy, ensuring reproducible fit in standard toolholders and consistent clamping repeatability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are used solely for explanatory purposes. There is no affiliation between Metav Werkzeuge and the mentioned brands; the offered article is original, factory-new merchandise from the named manufacturer.
CNMG190616-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the wear-resistant WPP10G grade for consistent machining of steels; the RP5 chipbreaker and 1.6 mm corner radius combine to deliver stable chip formation and extended edge life — order or request cutting-data advice via Metav Werkzeuge when required. CNMG190616-RP5 WPP10G Turning insert Tiger‑tec Gold for steel, Walter Tools The CNMG190616-RP5 WPP10G is a rhombic 80° indexable turning insert designed for machining steels, offering a coated carbide grade optimised for stable chip formation and reliable cutting performance. Tiger‑tec Gold coated carbide grade WPP10G Optimised RP5 chipbreaker for stable chips Rhombic 80° geometry, 0° negative rake 1.6 mm corner radius for robust edge life Productive machining of steel with reliable chip control The combination of Tiger‑tec Gold technology and the WPP10G grade creates a coated carbide surface engineered for wear resistance in steel cutting. The integrated RP5 chipbreaker is tuned to produce manageable chips during continuous turning operations, which reduces tool-related interruptions and supports a stable productivity flow. For users less familiar with cutting-grade nomenclature: WPP10G indicates a versatile, wear‑resistant grade specifically targeted at common steel applications as defined in ISO 513, covering unalloyed and alloyed steels. This focus on reliable chip control helps maintain consistent surface quality and predictable tool life in production environments. Robust geometry for process stability and repeatable edge life The insert’s rhombic 80° form and 1.6 mm corner radius provide mechanical strength at the cutting edge, improving durability under steady loads. The 0° negative rake configuration supports resilient cutting behaviour, particularly useful where a firmer edge is preferred to resist chipping and thermal stresses. These geometric choices translate into fewer tool changes and more consistent component tolerances, which is advantageous for batch production and serial turning tasks. The insert’s tolerance class M ensures dimensional conformity that aligns with standardised toolholder systems for predictable clamping and indexing. Practical integration and application guidance for workshop use Designated under the ISO-style marking CNMG190616-RP5 WPP10G, the insert is intended for conventional turning of steels and fits common CNMG-compatible toolholders. The grade’s focus on steel workpieces (material group P) makes it a practical option for a wide range of general engineering and fabrication tasks where a balance of wear resistance and toughness is required. For process setup, pairing the insert with stable clamping and appropriate cutting parameters helps to exploit its chip control characteristics; refer to manufacturer cutting-data or consult Metav Werkzeuge for optimisation. The insert’s coated carbide construction supports repeatable performance across production shifts and contributes to predictable maintenance intervals. For tailored cutting-data recommendations and supply of the Walter Tools CNMG190616-RP5 WPP10G insert, contact Metav Werkzeuge via email info@metav-werkzeuge.com or by phone at +49 2822 7131930 — expert advice is available for process integration and material‑specific settings Technical data SKU: CNMG190616-RP5-WPP10G-WALTER Article designation: CNMG190616-RP5 WPP10G Manufacturer: Walter Tools Product type: Turning insert (indexable) Grade / Sort: WPP10G Series: Tiger‑tec Gold Shape: Rhombus 80° Chipbreaker: RP5 Free rake angle: 0° (negative) Tolerance class: M Corner radius: 1.6 mm Size designation: 19 Core numerical data Corner radius: 1.6 mm Size: 19 Thickness designation: 06 Free rake angle: 0° (negative) Tolerance class: M Special features and materials Coating: Tiger‑tec Gold coated carbide Material application: Steel (P) Geometry: Rhombic 80° Chip control: RP5 chipbreaker Edge type: Negative rake for robustness FAQ What steels is this insert suitable for? The insert is specified for steel machining (material group P); the WPP10G grade is designed to handle unalloyed and alloyed steels as classified in ISO 513. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker produces stable, controlled chips during turning, which improves process reliability and reduces the risk of chip-related interruptions. Is the geometry suitable for finishing operations? Yes, the rhombic 80° form combined with a 1.6 mm corner radius and 0° negative rake provides a balance of edge strength and finish capability; parameter tuning is recommended for final-surface optimisation. Which toolholders accept this insert format? The ISO-style designation CNMG190616-RP5 corresponds to standard CNMG-compatible toolholders; proper clamping and alignment are important for repeatable results. How can cutting parameters be optimised for this grade? Cutting speeds and feeds depend on the steel grade and machine rigidity; for process optimisation and recommended starting values, consult Metav Werkzeuge or follow Walter Tools cutting-data guidelines for the WPP10G grade. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CNMG190616-RP5 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold durability and RP5 chip control for reliable steel turning; enjoy long tool life and consistent surface quality. Order the CNMG190616-RP5 WPP20G directly via Metav Werkzeuge or ask our consultants if needed. CNMG190616-RP5 WPP20G indexable turning insert for steel — Walter Tools The CNMG190616-RP5 WPP20G is a coated carbide indexable insert engineered for general turning of steel, offering stable cutting performance in serial and single-piece production. Tiger·tec Gold coated carbide grade RP5 chipbreaker for stable chip control Rhombic 80° shape with 1.6 mm nose radius Consistent cutting performance for higher throughput The advanced Tiger·tec Gold coating on this insert ensures a highly wear-resistant surface and consistent cutting behaviour across long production runs. As a coated carbide grade optimised for steel, it reduces flank and crater wear, which leads to fewer tool changes and less unplanned downtime. This results in measurable productivity improvements and a more predictable process, especially in medium- to high-volume turning operations. Reliable chip control to keep machining uninterrupted The integrated RP5 chipbreaker is designed to deliver consistently shaped chips when machining steels, improving evacuation and reducing the risk of chip-related interruptions. Combined with the 0° negative rake, the insert provides controlled cutting forces and enhanced edge stability, so operators experience fewer stoppages and easier chip handling in automated and manual setups. Durable edge and clear benefits for steel applications Designed for the ISO P group, this insert is tailored to the thermal and metallurgical characteristics of carbon and alloy steels. The WPP20G grade offers a balance between wear resistance and toughness, helping to avoid premature edge chipping while maintaining sharpness for acceptable surface finish. The result is a reliable tool life that supports cost-efficient production and consistent part quality. Geometry and compatibility that simplify tool planning The rhombic 80° geometry with a 1.6 mm nose radius provides a versatile tip for a wide range of turning tasks, from semi-finishing to general-purpose cutting. The insert designation is compatible with standard CNMG toolholders and clamping systems, allowing straightforward integration into existing tooling setups. The CNMG190616-RP5 WPP20G is therefore suitable for users seeking a robust, easily deployed insert for steel machining. Contact Metav Werkzeuge for cutting-parameter recommendations and to arrange supply of Walter Tools Tiger·tec Gold inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: CNMG190616-RP5-WPP20G-WALTER ISO designation: CNMG190616-RP5 WPP20G Series: Tiger·tec Gold Grade: WPP20G Manufacturer: Walter Tools Facts Shape: Rhombic 80° Size: 19 Nose radius: 1.6 mm Thickness code: 06 Rake: 0° (negative) Special features Coating technology: Tiger·tec Gold Chipbreaker: RP5 Material group suitability: Steel (ISO P) Cutting material: coated carbide FAQ What steels is this insert suitable for? The CNMG190616-RP5 WPP20G is formulated for the ISO P group and is suitable for unalloyed and alloyed steels, providing stable performance when turning typical steel grades. How does the RP5 chipbreaker improve machining? The RP5 chipbreaker on the insert promotes controlled chip formation and evacuation, reducing interruptions and improving process stability during steel turning. What does the 0° (negative) rake mean in practice? A 0° negative rake increases edge strength and resistance to chipping; with the CNMG190616-RP5 WPP20G this supports reliable performance under varying cutting conditions. Is the geometry compatible with standard CNMG toolholders? Yes—this CNMG insert fits conventional CNMG holders and clamping systems designed for rhombic 80° inserts, facilitating easy integration. Which grade family does WPP20G belong to and what is its benefit? WPP20G is a Walter Tools coated carbide grade within the Tiger·tec Gold family, offering a balance of wear resistance and toughness tailored to steel machining. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CNMG190616-RP5 WPP30G WPP30G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the RP5 chipbreaker and robust CNMG geometry for reliable steel turning and longer tool life; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. CNMG190616-RP5 WPP30G — Turning insert, Tiger·tec Gold, RP5 chipbreaker | Walter Tools The CNMG190616-RP5 WPP30G is a rhombic 80° turning insert optimised for machining steel, offering a balanced combination of wear resistance and toughness for medium to heavy turning operations. Tiger·tec Gold coating for enhanced tool life RP5 chipbreaker for consistent chip control Rhombic 80° geometry for versatile turning 1.6 mm corner radius for robust edge stability Longer machining cycles through advanced coating and grade The combination of Tiger·tec Gold technology and the WPP30G grade delivers a measurable increase in wear resistance while retaining toughness where it matters. Designed specifically for machining steel, the multilayer coating reduces flank wear and extends the service intervals of the tool, which supports productivity targets on high-volume turning lines. By favouring a balanced hardness and fracture resistance, this configuration makes the insert particularly suitable for mixed cutting conditions where thermal loads and intermittent engagement occur. The result is fewer unscheduled tool changes and a more predictable production rhythm. Stable process and improved chip control from geometry and chipbreaker The rhombic 80° geometry, combined with the RP5 chipbreaker and a 1.6 mm corner radius, creates a stable cutting edge that controls chip flow and reduces the risk of built-up edge. The design with a 0° (negative) rake angle enhances edge strength for interrupted cuts and heavier depths of cut, while the M tolerance class ensures consistent seat and repeatability in standard tool holders. In practice, these elements together reduce vibration, improve surface finish and simplify parameter selection for machining centres. The insert designation CNMG190616-RP5 identifies this proven mix of chip control and edge robustness for demanding turning tasks. Practical benefits and application guidance for efficient workshop use Because the insert is specified for group P work (steel) and pairs a wear-resistant coating with a tough substrate, workshops will notice improved process reliability in serial and single-piece production alike. The negative rake and chipbreaker choice favour operations where secure edge life and predictable chips are priorities, such as bar turning, stepped shafts and semi-finished parts. For best results, match cutting speeds and feeds to the workpiece grade and machine rigidity; reduced feed may be advantageous when chasing fine surface finishes, while full-depth passes benefit from the insert’s edge stability. For tailored machining data or alternative grades, Metav Werkzeuge can advise on optimisation and toolholder selection. Contact Metav Werkzeuge today for tailored machining advice on Walter Tools Tiger·tec Gold turning inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: CNMG190616-RP5-WPP30G-WALTER Designation: CNMG190616-RP5 WPP30G Product type: Drehwendeschneidplatte / Turning insert Brand: Walter Tools Series: Tiger-tec Gold Grade: WPP30G Facts Insert size: 19 Corner radius: 1.6 mm Thickness code: 06 Rake angle: 0° (negative) Geometry: Rhombus 80° Special features Coating: Tiger·tec Gold Chipbreaker: RP5 Material application: Steel (P) Tolerance class: M Execution: G FAQ What materials is this insert suitable for? The CNMG190616-RP5 WPP30G from Walter Tools is designed for machining steel (ISO group P) and performs reliably across common unalloyed and alloyed steel grades. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WPP30G grade increases wear resistance and thermal stability, helping to extend tool life and reduce changeover frequency in Walter Tools turning applications. Which chipbreaker should be selected for stable chips in general turning? The RP5 chipbreaker integrated in this insert promotes consistent chip formation for a broad range of turning tasks, minimizing chip-related interruptions during machining. Is the insert suitable for interrupted cuts or roughing operations? Yes; the 0° (negative) rake and 1.6 mm corner radius provide enhanced edge strength, making the insert appropriate for interrupted cuts and heavier depth-of-cut conditions when using Walter Tools inserts. What does the tolerance class M mean for tool mounting? Tolerance class M indicates standardised dimensional accuracy and repeatability, ensuring consistent seating and interchangeability across toolholders compatible with CNMG geometry. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used here for explanation only and do not indicate any affiliation between our company and the trademark holders. The offered item is an original, factory-new product of the manufacturer.
CNMG190616-RP7 WKP30S Wendeplatten - Walter Tools
Take advantage of a robust cutting grade and a proven chip control geometry for reliable, high‑throughput turning operations; combine the Tiger‑tec Silver coating with the WKP30S carbide grade for long tool life and consistent results. Order directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. CNMG190616-RP7 WKP30S turning indexable insert — Rhombic 80°, 1.6 mm corner radius | Walter Tools the CNMG190616-RP7 WKP30S is a negative‑rake rhombic insert engineered for demanding turning applications on Stahl and cast iron Tiger‑tec Silver coated carbide grade WKP30S Optimised for Stahl (P) and cast iron (K) Rhombic 80° insert geometry for versatile turning Negative rake, 0° clearance, 1.6 mm corner radius High productivity through coated carbide technology The Tiger‑tec Silver coating combined with the WKP30S grade offers enhanced wear resistance and thermal stability, resulting in extended cutting edge life and fewer indexings. Designed for the machining of Stahl and cast iron, this combination reduces flank wear under typical turning temperatures and enables higher cutting speeds without premature degradation. The robust coating technology translates directly into lower tooling costs per workpiece and more consistent component tolerances — a clear productivity benefit for workshop and production environments. Robust geometry for consistent chip control and surface quality The rhombic 80° shape with a 1.6 mm corner radius and RP7 chipbreaker provides a balance between strength and finish. The negative rake (0°) geometry increases edge stability for interrupted cuts and heavy radial engagement, while the RP7 chip control reduces long or stringy chips when machining abrasive castings or tougher Stahl grades. The outcome is improved surface finish and reproducible component quality with fewer secondary operations — particularly advantageous for small‑batch and production turning where repeatability matters. Practical application advantages and integration into tooling systems Marked as CNMG190616 in conventional indexing systems, the insert matches standard pocket and clamp configurations used in most turning toolholders and is supplied in the Tiger‑tec Silver series for immediate use in production. The insert thickness and tolerance class ensure reliable seating and repeatable positioning; this simplifies tool preparation and reduces set‑up time. For shops seeking a cost‑efficient upgrade to carbide inserts that combine longevity with predictable chip behaviour, this specification supports both finishing and versatile medium‑duty roughing tasks without compromising process stability. For high‑performance turning with Walter Tools' Tiger‑tec Silver grade, contact Metav Werkzeuge for tailored application advice and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: CNMG190616-RP7-WKP30S-WALTER Article designation: CNMG190616-RP7 WKP30S Product type: Turning indexable insert (Drehwendeschneidplatte) Brand: Walter Tools Facts Insert size: 19 mm Corner radius: 1.6 mm Clearance / rake: 0° (negative) Insert form: Rhombic 80° Thickness: 06 Tolerance class: M Special features Coating: Tiger‑tec Silver Grade: WKP30S (coated carbide) Chipbreaker: RP7 Material suitability: Stahl (P), cast iron (K) Series: Tiger‑tec Silver FAQ What materials is this insert intended for? The CNMG190616-RP7 WKP30S insert is specified for machining Stahl (group P) and cast iron (group K) according to ISO‑based material classification, making it suitable for a wide range of general engineering parts. How does the RP7 chipbreaker affect machining behaviour? The RP7 chip control geometry promotes short, controllable chips in both Stahl and cast iron, improving process stability and minimising chip entanglement at typical turning feeds and speeds. Is the negative‑rake geometry suitable for interrupted cuts? Yes, the 0° negative rake increases edge robustness and impact resistance, which is beneficial for interrupted cuts and applications with variable engagement. Can this insert be used for finishing operations? With its rhombic 80° form and 1.6 mm corner radius, the insert supports finishing and medium‑duty turning where a fine surface finish and dimensional consistency are required. What is the insert designation for ordering and tool preparation? Order under CNMG190616-RP7 WKP30S; the CNMG format and thickness allow compatibility with standard turning holders designed for this insert family. Protected trademarks and trade names are the property of their respective owners. The Walter Tools brand is mentioned for product identification purposes only. There is no affiliation implied between Metav Werkzeuge and Walter Tools; the offered item is an original, factory‑new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
CNMG190616-RP7 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a robust WPP05G carbide grade and a stable RP7 chipbreaker to achieve reliable steel turning with consistent tool life; order the insert directly via Metav Werkzeuge or contact the consultants for application support. CNMG190616-RP7 WPP05G indexable turning insert for steel — Walter Tools The CNMG190616-RP7 WPP05G is an indexable turning insert engineered for productive steel machining, offering a Tiger·tec Gold coated carbide grade and a geometry optimised for stable chip control. Tiger·tec Gold coated carbide grade WPP05G Designed for steel machining (ISO P) Rhombic 80° shape with 1.6 mm nose radius Negative 0° rake for stable cutting High-performance grade for consistent steel turning The coated carbide WPP05G grade delivers a blend of wear resistance and toughness that keeps production moving. As part of the Tiger·tec Gold family, the grade is designed specifically for the thermal and mechanical demands of machining steels (ISO P), providing predictable tool life and steady cutting forces. The result is less downtime from tool changeovers and improved process reliability, particularly for mixed runs of unalloyed and alloyed steels. The combination of coating technology and optimised microstructure supports stable edge behaviour and consistent surface quality over longer intervals. Geometry that stabilises the cut and improves part quality A rhombic 80° insert profile combined with a 1.6 mm nose radius gives a pragmatic balance between edge strength and surface finish. The negative 0° rake produces a robust cutting edge that tolerates interrupted cuts and variable feed conditions, while the RP7 chipbreaker controls chip formation in typical steel applications. In practical terms, this geometry reduces vibration and edge chipping, which translates into fewer rejects and more predictable dimension control on turned components. The design supports both finishing and medium-turning tasks with improved repeatability. Process advantages for production and job-shop environments Using a coated, grade-optimised insert brings measurable process benefits: improved wear behaviour, reproducible surface quality and fewer unscheduled interventions. The insert is tailored for the steel group (ISO P), addressing the heat and chip characteristics encountered in industrial turning. For shops aiming to increase throughput without sacrificing component tolerances, the insert promotes higher uptime and a steady cutting performance. Clear grade selection further simplifies tooling decisions and aligns with standard production planning and quality assurance procedures. Practical format and handling details for seamless integration The insert comes in the CNMG format with format code 19 and plate thickness 06, suitable for commonly used tool holders that accept CNMG geometry. The plate’s configuration and tolerance class M provide the dimensional consistency required for repeatable clamping and tool indexing. Because the grade is a coated carbide, it is compatible with established turning workflows and can be integrated into existing tool sets without altering machine setups. The concise specification allows quick verification against tooling lists and CAD/CAM libraries. Contact Metav Werkzeuge today for application advice or to arrange supply of CNMG190616-RP7 WPP05G from Walter Tools Technical data Article number: CNMG190616-RP7-WPP05G-WALTER Name: CNMG190616-RP7 WPP05G Manufacturer: Walter Tools Product type: indexable turning insert Facts Corner radius: 1.6 mm Rake: 0° (negative) Shape: Rhombic 80° Format: 19 Plate thickness: 06 Tolerance class: M Materials & features Grade: WPP05G (coated carbide) Series: Tiger·tec Gold Chipbreaker: RP7 Suitable for: steel (ISO P) Execution: G FAQ What steels is this insert suitable for? The CNMG190616-RP7 WPP05G insert is formulated for the ISO P group and is suitable for machining unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold enhances wear resistance and heat management, so the WPP05G grade maintains a stable cutting edge and extends productive tool life in steel turning. What does the RP7 chipbreaker provide? The RP7 chipbreaker is designed to control chip shape and evacuation in steel applications, supporting safer chip handling and reduced risk of built-up edge. Is the geometry suitable for interrupted cuts and roughing? Yes. The negative 0° rake and robust 1.6 mm nose radius offer edge strength that copes well with interrupted cuts and mixed cutting conditions. Which tolerance class does the insert conform to? The insert is specified with tolerance class M, providing consistent dimensional accuracy for repeatable indexing. Walter Tools: The Walter AG (brand: Walter Tools) is a global provider of precision tools for metalworking and part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners. The item offered is an original, factory-new product.
CNMG190616-RP7 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger·tec Gold coating, a robust rhombic 80° geometry and a 1.6 mm corner radius for reliable component quality and long tool life; order the CNMG190616-RP7 WPP10G turning insert directly via Metav Werkzeuge or consult our experts for process optimisation. CNMG190616-RP7 WPP10G turning insert — Tiger·tec Gold, for steel, Walter Tools CNMG190616-RP7 WPP10G is an indexable turning insert designed for efficient steel machining applications, combining a coated carbide grade with a stable chipformer and an 80° rhombic geometry Tiger·tec Gold coating for extended tool life Suitable for ISO P (steel) applications 0° negative rake for secure cutting edge support 1.6 mm corner radius for robust finish Consistent performance for steel turning The CNMG190616-RP7 WPP10G insert is engineered for repeatable results in turning operations on steel (ISO group P). The combination of a coated carbide base and the Tiger·tec Gold coating delivers wear resistance and thermal stability, which reduces flank wear and maintains dimensional accuracy over longer tool life. For process planners this translates into fewer indexings, steadier cycle times and predictable maintenance intervals, supporting lean production and lower per-part costs without compromising surface quality. Coating technology that increases productivity The WPP10G grade is a coated carbide specifically tuned for the thermal and mechanical demands of steel machining. The multi-layer Tiger·tec Gold treatment improves heat resistance and edge integrity, enabling higher cutting speeds or more aggressive feeds compared with uncoated grades. For users unfamiliar with coatings: the layers act as a protective barrier and reduce friction at the cutting zone, which leads to improved tool life and more consistent part tolerances — a clear rational advantage for high-throughput manufacturing. Geometry and chip control that protect the process The insert’s rhombus 80° form and the RP7 chipbreaker are selected to balance strength and chip control. The 1.6 mm corner radius supports a robust cutting edge that resists chipping under interrupted cuts and heavy cross-section removal, while the 0° negative rake increases edge support for stable roughing passes. The net result is a reliable edge condition, predictable chip formation and an improved surface finish with fewer rejects — all contributing to lower rework and higher overall equipment effectiveness. Handling, economy and application guidance As an indexable insert, this product offers quick replacement and straightforward inventory management compared with brazed or solid tools. The CNMG pocket shape enables flexible toolholder selection and long tool life when combined with appropriate cutting parameters for steel. For process optimisation, consider incrementally raising cutting speed within machine and workpiece limits to exploit the coating’s thermal benefits; small adjustments often yield measurable productivity gains. For advice on parameter selection, Metav Werkzeuge’s technical consultants can provide targeted recommendations for specific machines and materials. Choose Walter Tools’ Tiger·tec Gold CNMG190616-RP7 WPP10G for robust, high‑productivity steel turning and contact Metav Werkzeuge for detailed machining guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: CNMG190616-RP7-WPP10G-WALTER Label: Drehwendeschneidplatte CNMG190616-RP7 WPP10G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP10G Form: Rhombus 80° Chipbreaker: RP7 Tolerance class: M Designation without grade: CNMG190616-RP7 SKU: CNMG190616-RP7-WPP10G-WALTER Facts Plate size: 19 Corner radius: 1.6 mm Thickness: 06 Negative rake: 0° (negative) Material class: P (steel) Special features Coating: Tiger·tec Gold (coated carbide) Material application: suitable for steel (ISO P) Chip control: RP7 chipbreaker Geometry: rhombic 80° insert form Execution: G FAQ What materials is this insert suited for? The CNMG190616-RP7 WPP10G turning insert is designed primarily for steel applications (ISO group P) and is optimised for the heat and chip characteristics typical of these materials. How does the Tiger·tec Gold coating affect cutting performance? The Tiger·tec Gold coating on the WPP10G grade increases heat resistance and lowers flank wear, allowing more aggressive cutting strategies while maintaining surface finish and dimensional stability. Can this insert be used for finishing passes? Yes — with the correct cutting parameters the rhombus 80° geometry and 1.6 mm corner radius deliver a good surface finish; adjust feeds and speeds for the best compromise between productivity and finish quality. What does the RP7 chipbreaker provide in practice? The RP7 chipbreaker promotes controlled chip formation and evacuation during turning, reducing the risk of built-up edge and improving process stability for both continuous and short-chipping conditions. Is this insert suitable for interrupted cuts or roughing heavy sections? The combination of 0° negative rake and a 1.6 mm corner radius gives robust edge support suitable for interrupted cuts and heavier cross‑sections, improving resistance to edge chipping. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presence: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, factory‑new goods of the manufacturer.
CNMG190616-RP7 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold technology and the RP7 chipbreaker to increase productivity and stabilise chip formation in steel turning. The 0° negative relief and a 1.6 mm corner radius deliver robust cutting performance and predictable tool life. Order the CNMG190616-RP7 WPP20G directly via Metav Werkzeuge or consult our specialists for application advice. CNMG190616-RP7 WPP20G — Turning indexable insert, Tiger·tec Gold, for steel, Walter Tools CNMG190616-RP7 WPP20G is an indexable turning insert designed for reliable steel machining, combining a coated-carbide grade with an RP7 chipbreaker for stable chip control and high process security Tiger·tec Gold coated for long tool life RP7 chipbreaker for reliable chip control 0° negative relief for robust cutting Rhombic 80° form with 1.6 mm corner radius Consistent productivity through advanced coating and substrate The CNMG190616-RP7 WPP20G combines a coated carbide substrate with the Tiger·tec Gold coating technology to extend tool life and allow higher machining parameters on steel. The coating reduces wear rates and improves thermal resistance, which means longer intervals between index changes and fewer unplanned stoppages. For production environments that prioritise throughput, this insert offers a quantifiable improvement in machining stability and a reduced cost per component thanks to its wear-resistant surface. Geometry that improves chip control and edge security Precision geometry drives reproducible results: the RP7 chipbreaker is tuned for the thermal and mechanical behaviour typical of steel cutting, producing short, controllable chips under a wide range of feeds. The rhombic 80° shape and 1.6 mm corner radius give a versatile cutting edge, while the 0° negative relief provides enhanced edge strength for interrupted cuts and heavier depths of cut. The result is reliable surface quality and fewer edge failures during heavy-duty turning operations. Process security and practical workshop benefits Designed for stable production, this insert supports consistent part quality and simpler process set-ups. The tolerance class M ensures dimensional consistency across batches, and the WPP20G grade delivers a balanced combination of wear resistance and toughness for general steel applications. Using a uniform insert design across a shop floor reduces inventory complexity and helps maintain predictable machining cycles, improving overall plant efficiency and part-to-part repeatability. For application guidance or to secure supply of the Tiger·tec Gold CNMG190616-RP7 WPP20G insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 and request technical advice tailored to the machining task Technical data Article number: CNMG190616-RP7-WPP20G-WALTER Designation: CNMG190616-RP7 WPP20G Product type: Turning indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Inscribed circle: 19 Corner radius: 1.6 mm Relief angle: 0° negative Thickness code: 06 Tolerance class: M Special features Chipbreaker: RP7 Shape: Rhombic 80° Grade/sort: WPP20G Material application: Steel (P) Coated carbide Execution: G FAQ Which materials is this insert suitable for? The CNMG190616-RP7 WPP20G is designed primarily for steel (P) applications and performs well on a wide range of unalloyed and alloyed steels due to its Tiger·tec Gold-coated carbide. What does the RP7 chipbreaker provide? The RP7 chipbreaker on this Walter Tools turning insert promotes stable, short chip formation and improved evacuation, which helps to maintain surface finish and reduce the risk of chip-related interruptions. How does the 0° negative relief affect cutting? A 0° negative relief increases edge strength and resistance to mechanical shock, making the insert well suited to interrupted cuts and heavier depths of cut while preserving tool life. Is the WPP20G grade wear-resistant or tough? WPP20G is a balanced coated-carbide grade within the Tiger·tec Gold family that provides good wear resistance combined with sufficient toughness for general steel turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product from the manufacturer.
CNMG190616-RP7 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of high process stability, long tool life and consistent chip control for efficient turning operations; order the insert directly via Metav Werkzeuge or consult the team for tailored machining parameters. CNMG190616-RP7 WPP30G turning insert — Tiger·tec Gold for Stahl (Walter Tools) The CNMG190616-RP7 WPP30G is a coated carbide turning insert from Walter Tools' Tiger·tec Gold range designed for reliable Stahl turning with RP7 chip control and a 1.6 mm nose radius Tiger·tec Gold coated carbide WPP30G RP7 chipbreaker for stable chip control Rhombus 80° geometry for versatile turning 0° negative rake for robust cutting performance Consistent productivity from coated carbide technology The Tiger·tec Gold coating combined with the WPP30G grade provides a balanced performance profile for production turning of Stahl. The coated carbide substrate reduces wear and maintains edge stability under the typical heat and forces of steel machining, which translates into longer tool life and fewer insert changes. The economic benefit is clear: fewer tool changes lead to reduced cycle interruptions and higher net machining time. Precise chip control for safer, more reliable turning Equipped with the RP7 chipbreaker, the insert shapes chips predictably across a wide range of cutting parameters. Predictable chip formation reduces the risk of built-up edge and workpiece damage, improving surface finish and process reliability. For batch production or mixed-series work, this means a measurable reduction in scrap and rework, supporting leaner workflows and stable output. Robust geometry for demanding conditions The Rhombus 80° form and 0° negative rake angle make this insert particularly suited to robust and semi-finishing operations where edge stability is essential. The 1.6 mm nose radius helps to maintain a durable cutting edge while delivering acceptable surface quality, especially when working with interrupted cuts or tougher Stahl grades. The combination of geometry and coating makes the insert forgiving under variable cutting loads. Practical selection and application guidance Grade designation P indicates suitability for Stahl; the WPP30G variety is optimised for a mix of wear resistance and toughness, making it appropriate for general steel machining tasks. When selecting machining parameters, prioritise stable feeds and monitor cutting forces—this approach exploits the insert’s process security and contributes to consistent batch quality. For customers requiring specific cutting data for particular Stahl types, technical advice is available from Metav Werkzeuge. Contact Metav Werkzeuge today for cutting data, batch recommendations or to request a tailored tooling proposal that leverages Walter Tools' Tiger·tec Gold technology Technical data SKU: CNMG190616-RP7-WPP30G-WALTER Article: Drehwendeschneidplatte CNMG190616-RP7 WPP30G Manufacturer: Walter Tools Series: Tiger·tec Gold Designation: CNMG190616-RP7 WPP30G UID: CNMG190616-RP7-WPP30G-WALTER Facts Insert size: 19 Nose radius: 1,6 mm Relief angle: 0° (negative) Plate thickness: 06 Tolerance class: M Special features Chipbreaker: RP7 Plate form: Rhombus 80° Grade: WPP30G (coated carbide) Execution: G Material group: P (Stahl) Application: turning operations, roughing to semi-finishing FAQ What materials is this insert suitable for? The CNMG190616-RP7 WPP30G insert is intended for Stahl applications; the WPP30G grade is optimised for typical steel cutting conditions. How does the RP7 chipbreaker affect machining? The RP7 chipbreaker on this Walter Tools insert promotes controlled chip formation, which helps maintain surface quality and reduces the likelihood of chip-related interruptions. Is the insert appropriate for interrupted cuts? Yes, the Rhombus 80° geometry combined with a 1,6 mm nose radius and negative rake offers robustness suitable for interrupted and heavy-duty cutting scenarios. What are the main advantages of the Tiger·tec Gold coating? Tiger·tec Gold coating enhances wear resistance and edge stability, supporting longer tool life and steady performance across varied Stahl grades. Can this insert be used for finishing passes? The insert is designed primarily for robust cutting and semi-finishing; finishing operations are possible but may require adjusted feeds and depths of cut for the desired surface finish. Which chip control and process benefits can be expected in volume production? Using the CNMG190616-RP7 WPP30G reduces tool change frequency and stabilises chip behaviour, resulting in improved process uptime and consistent part quality. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metal cutting and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are used for explanation only. There is no affiliation between our company and the named brands. The offered item is original, factory-new merchandise of the manufacturer.
CNMG190624-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
High-performance turning benefits from the Tiger·tec Gold coating and the RP5 chipbreaker for reliable edge life and consistent chip control; the 2.4 mm corner radius adds robustness for demanding steel operations. Order the insert via Metav Werkzeuge or consult their application specialists for process-specific recommendations. CNMG190624-RP5 WPP10G — Indexable turning insert, Tiger·tec Gold (Walter Tools) The CNMG190624-RP5 WPP10G is a negative-rake, rhombic 80° indexable insert engineered for steel machining, combining Tiger·tec Gold coating and the RP5 chipformer for stable metalcutting performance. Tiger·tec Gold coated for extended life Optimised for machining steel (ISO group P) RP5 chipbreaker for stable chip control 2.4 mm corner radius for robust edge strength Increased productivity through advanced coating The Tiger·tec Gold coating on this insert provides a balance of wear resistance and thermal stability that extends tool life under the typical heat and strain of steel turning. As a coated carbide grade, WPP10G is formulated for the machining behaviour of ISO group P (steel), enabling longer uninterrupted cycles and fewer indexings. The result is measurable productivity gains and a more stable process window when facing mixed batches or varying cutting conditions. Predictable chip control for safer cycles The integrated RP5 chipbreaker delivers consistent chip formation, reducing the risk of long, tangled chips and improving evacuation in both through-tool and over-the-tool applications. Combined with the 0° (negative) rake geometry, the insert provides shear conditions that favour controlled cutting forces and repeatable surface quality. For production environments where uptime and cleanliness of the machining area matter, this geometry-and-chipbreaker pairing reduces secondary handling and machine stops. Robust geometry for heavier cuts and secure clamping With a 2.4 mm corner radius and a rhombic 80° form, the insert offers a larger cutting edge volume for stability under interrupted or roughing cuts. The 06 thickness and tolerance class M ensure consistent seating and clamping in standard toolholders, which supports vibration damping and repeatable dimensional results. These design choices help maintain tool life and part quality when machining steels that generate high loads or require longer contact lengths. Practical application and compatibility guidance The CNMG190624-RP5 WPP10G insert suits general to semi-finishing turning operations in steels and is especially useful where a robust edge and reliable chip control are required. Where process reliability is a priority, pairing this insert with a rigid holder and appropriately adjusted cutting parameters will leverage the Tiger·tec Gold advantages. For bespoke material mixes or unusual geometries, Metav Werkzeuge’s advisers can provide parameter guidance tailored to the machining centre and workpiece material. Contact Metav Werkzeuge for tailored machining recommendations on Walter Tools Tiger·tec Gold inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CNMG190624-RP5-WPP10G-WALTER SKU: CNMG190624-RP5-WPP10G-WALTER Label: Drehwendeschneidplatte CNMG190624-RP5 WPP10G Walter Tools Product type: Drehwendeschneidplatte (indexable turning insert) Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP10G ISO designation: CNMG190624-RP5 WPP10G Chipbreaker: RP5 Dimensions & measurable properties Inscribed circle / size: 19 mm Thickness: 6.0 mm Corner radius: 2.4 mm Relief angle: 0° (negative) Plate form: Rhombus 80° Tolerance class: M Materials & special features Coating technology: Tiger·tec Gold Substrate: coated carbide Application group: ISO P (steel) Chipcontrol: RP5 chipbreaker Execution: G Robust geometry for interrupted cuts FAQ Is this insert suitable for machining steel? The CNMG190624-RP5 WPP10G insert from Walter Tools is specifically designed for ISO group P materials and is optimised for the cutting conditions typical of steel machining. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold increases wear resistance and thermal stability on the WPP10G grade, which leads to longer tool life and improved process consistency compared with uncoated grades. How does the RP5 chipbreaker affect production? The RP5 chipbreaker on this insert produces short, controllable chips that improve evacuation and reduce the risk of chip-related interruptions during turning cycles. What does the 0° (negative) rake mean in practical terms? A 0° negative rake produces a robust cutting edge and tends to lower the risk of edge chipping under heavy loads, favouring stability over the most aggressive cutting angles. Which operations benefit most from this insert geometry? The rhombic 80° form and 2.4 mm corner radius are well suited to general turning and semi-finishing tasks where a combination of edge strength and good surface quality is required. Walter Tools; Headquarters: Tübingen Walter AG (brand: Walter Tools) with its headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com